muscles: be sure that %code snippets are not glue together on a single line

[bison.git] / doc / bison.texi

\input texinfo @c -*-texinfo-*-
@comment %**start of header
@setfilename bison.info
@include version.texi
@settitle Bison @value{VERSION}
@setchapternewpage odd

@finalout

@c SMALL BOOK version
@c This edition has been formatted so that you can format and print it in
@c the smallbook format.
@c @smallbook

@c Set following if you want to document %default-prec and %no-default-prec.
@c This feature is experimental and may change in future Bison versions.
@c @set defaultprec

@ifnotinfo
@syncodeindex fn cp
@syncodeindex vr cp
@syncodeindex tp cp
@end ifnotinfo
@ifinfo
@synindex fn cp
@synindex vr cp
@synindex tp cp
@end ifinfo
@comment %**end of header

@copying

This manual (@value{UPDATED}) is for GNU Bison (version
@value{VERSION}), the GNU parser generator.

Copyright @copyright{} 1988-1993, 1995, 1998-2013 Free Software
Foundation, Inc.

@quotation
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License,
Version 1.3 or any later version published by the Free Software
Foundation; with no Invariant Sections, with the Front-Cover texts
being ``A GNU Manual,'' and with the Back-Cover Texts as in
(a) below.  A copy of the license is included in the section entitled
``GNU Free Documentation License.''

(a) The FSF's Back-Cover Text is: ``You have the freedom to copy and
modify this GNU manual.  Buying copies from the FSF
supports it in developing GNU and promoting software
freedom.''
@end quotation
@end copying

@dircategory Software development
@direntry
* bison: (bison).       GNU parser generator (Yacc replacement).
@end direntry

@titlepage
@title Bison
@subtitle The Yacc-compatible Parser Generator
@subtitle @value{UPDATED}, Bison Version @value{VERSION}

@author by Charles Donnelly and Richard Stallman

@page
@vskip 0pt plus 1filll
@insertcopying
@sp 2
Published by the Free Software Foundation @*
51 Franklin Street, Fifth Floor @*
Boston, MA  02110-1301  USA @*
Printed copies are available from the Free Software Foundation.@*
ISBN 1-882114-44-2
@sp 2
Cover art by Etienne Suvasa.
@end titlepage

@contents

@ifnottex
@node Top
@top Bison
@insertcopying
@end ifnottex

@menu
* Introduction::
* Conditions::
* Copying::             The GNU General Public License says
                          how you can copy and share Bison.

Tutorial sections:
* Concepts::            Basic concepts for understanding Bison.
* Examples::            Three simple explained examples of using Bison.

Reference sections:
* Grammar File::        Writing Bison declarations and rules.
* Interface::           C-language interface to the parser function @code{yyparse}.
* Algorithm::           How the Bison parser works at run-time.
* Error Recovery::      Writing rules for error recovery.
* Context Dependency::  What to do if your language syntax is too
                          messy for Bison to handle straightforwardly.
* Debugging::           Understanding or debugging Bison parsers.
* Invocation::          How to run Bison (to produce the parser implementation).
* Other Languages::     Creating C++ and Java parsers.
* FAQ::                 Frequently Asked Questions
* Table of Symbols::    All the keywords of the Bison language are explained.
* Glossary::            Basic concepts are explained.
* Copying This Manual:: License for copying this manual.
* Bibliography::        Publications cited in this manual.
* Index of Terms::      Cross-references to the text.

@detailmenu
 --- The Detailed Node Listing ---

The Concepts of Bison

* Language and Grammar:: Languages and context-free grammars,
                           as mathematical ideas.
* Grammar in Bison::     How we represent grammars for Bison's sake.
* Semantic Values::      Each token or syntactic grouping can have
                           a semantic value (the value of an integer,
                           the name of an identifier, etc.).
* Semantic Actions::     Each rule can have an action containing C code.
* GLR Parsers::          Writing parsers for general context-free languages.
* Locations::            Overview of location tracking.
* Bison Parser::         What are Bison's input and output,
                           how is the output used?
* Stages::               Stages in writing and running Bison grammars.
* Grammar Layout::       Overall structure of a Bison grammar file.

Writing GLR Parsers

* Simple GLR Parsers::     Using GLR parsers on unambiguous grammars.
* Merging GLR Parses::     Using GLR parsers to resolve ambiguities.
* GLR Semantic Actions::   Considerations for semantic values and deferred actions.
* Semantic Predicates::    Controlling a parse with arbitrary computations.
* Compiler Requirements::  GLR parsers require a modern C compiler.

Examples

* RPN Calc::               Reverse polish notation calculator;
                             a first example with no operator precedence.
* Infix Calc::             Infix (algebraic) notation calculator.
                             Operator precedence is introduced.
* Simple Error Recovery::  Continuing after syntax errors.
* Location Tracking Calc:: Demonstrating the use of @@@var{n} and @@$.
* Multi-function Calc::    Calculator with memory and trig functions.
                             It uses multiple data-types for semantic values.
* Exercises::              Ideas for improving the multi-function calculator.

Reverse Polish Notation Calculator

* Rpcalc Declarations::    Prologue (declarations) for rpcalc.
* Rpcalc Rules::           Grammar Rules for rpcalc, with explanation.
* Rpcalc Lexer::           The lexical analyzer.
* Rpcalc Main::            The controlling function.
* Rpcalc Error::           The error reporting function.
* Rpcalc Generate::        Running Bison on the grammar file.
* Rpcalc Compile::         Run the C compiler on the output code.

Grammar Rules for @code{rpcalc}

* Rpcalc Input::            Explanation of the @code{input} nonterminal
* Rpcalc Line::             Explanation of the @code{line} nonterminal
* Rpcalc Expr::             Explanation of the @code{expr} nonterminal

Location Tracking Calculator: @code{ltcalc}

* Ltcalc Declarations::    Bison and C declarations for ltcalc.
* Ltcalc Rules::           Grammar rules for ltcalc, with explanations.
* Ltcalc Lexer::           The lexical analyzer.

Multi-Function Calculator: @code{mfcalc}

* Mfcalc Declarations::    Bison declarations for multi-function calculator.
* Mfcalc Rules::           Grammar rules for the calculator.
* Mfcalc Symbol Table::    Symbol table management subroutines.
* Mfcalc Lexer::           The lexical analyzer.
* Mfcalc Main::            The controlling function.

Bison Grammar Files

* Grammar Outline::    Overall layout of the grammar file.
* Symbols::            Terminal and nonterminal symbols.
* Rules::              How to write grammar rules.
* Semantics::          Semantic values and actions.
* Tracking Locations:: Locations and actions.
* Named References::   Using named references in actions.
* Declarations::       All kinds of Bison declarations are described here.
* Multiple Parsers::   Putting more than one Bison parser in one program.

Outline of a Bison Grammar

* Prologue::              Syntax and usage of the prologue.
* Prologue Alternatives:: Syntax and usage of alternatives to the prologue.
* Bison Declarations::    Syntax and usage of the Bison declarations section.
* Grammar Rules::         Syntax and usage of the grammar rules section.
* Epilogue::              Syntax and usage of the epilogue.

Grammar Rules

* Rules Syntax::   Syntax of the rules.
* Empty Rules::    Symbols that can match the empty string.
* Recursion::      Writing recursive rules.


Defining Language Semantics

* Value Type::        Specifying one data type for all semantic values.
* Multiple Types::    Specifying several alternative data types.
* Type Generation::   Generating the semantic value type.
* Union Decl::        Declaring the set of all semantic value types.
* Structured Value Type::  Providing a structured semantic value type.
* Actions::           An action is the semantic definition of a grammar rule.
* Action Types::      Specifying data types for actions to operate on.
* Mid-Rule Actions::  Most actions go at the end of a rule.
                      This says when, why and how to use the exceptional
                        action in the middle of a rule.

Actions in Mid-Rule

* Using Mid-Rule Actions::       Putting an action in the middle of a rule.
* Mid-Rule Action Translation::  How mid-rule actions are actually processed.
* Mid-Rule Conflicts::           Mid-rule actions can cause conflicts.

Tracking Locations

* Location Type::               Specifying a data type for locations.
* Actions and Locations::       Using locations in actions.
* Location Default Action::     Defining a general way to compute locations.

Bison Declarations

* Require Decl::      Requiring a Bison version.
* Token Decl::        Declaring terminal symbols.
* Precedence Decl::   Declaring terminals with precedence and associativity.
* Type Decl::         Declaring the choice of type for a nonterminal symbol.
* Initial Action Decl::  Code run before parsing starts.
* Destructor Decl::   Declaring how symbols are freed.
* Printer Decl::      Declaring how symbol values are displayed.
* Expect Decl::       Suppressing warnings about parsing conflicts.
* Start Decl::        Specifying the start symbol.
* Pure Decl::         Requesting a reentrant parser.
* Push Decl::         Requesting a push parser.
* Decl Summary::      Table of all Bison declarations.
* %define Summary::   Defining variables to adjust Bison's behavior.
* %code Summary::     Inserting code into the parser source.

Parser C-Language Interface

* Parser Function::         How to call @code{yyparse} and what it returns.
* Push Parser Function::    How to call @code{yypush_parse} and what it returns.
* Pull Parser Function::    How to call @code{yypull_parse} and what it returns.
* Parser Create Function::  How to call @code{yypstate_new} and what it returns.
* Parser Delete Function::  How to call @code{yypstate_delete} and what it returns.
* Lexical::                 You must supply a function @code{yylex}
                              which reads tokens.
* Error Reporting::         You must supply a function @code{yyerror}.
* Action Features::         Special features for use in actions.
* Internationalization::    How to let the parser speak in the user's
                              native language.

The Lexical Analyzer Function @code{yylex}

* Calling Convention::  How @code{yyparse} calls @code{yylex}.
* Token Values::        How @code{yylex} must return the semantic value
                          of the token it has read.
* Token Locations::     How @code{yylex} must return the text location
                          (line number, etc.) of the token, if the
                          actions want that.
* Pure Calling::        How the calling convention differs in a pure parser
                          (@pxref{Pure Decl, ,A Pure (Reentrant) Parser}).

The Bison Parser Algorithm

* Lookahead::         Parser looks one token ahead when deciding what to do.
* Shift/Reduce::      Conflicts: when either shifting or reduction is valid.
* Precedence::        Operator precedence works by resolving conflicts.
* Contextual Precedence::  When an operator's precedence depends on context.
* Parser States::     The parser is a finite-state-machine with stack.
* Reduce/Reduce::     When two rules are applicable in the same situation.
* Mysterious Conflicts:: Conflicts that look unjustified.
* Tuning LR::         How to tune fundamental aspects of LR-based parsing.
* Generalized LR Parsing::  Parsing arbitrary context-free grammars.
* Memory Management:: What happens when memory is exhausted.  How to avoid it.

Operator Precedence

* Why Precedence::    An example showing why precedence is needed.
* Using Precedence::  How to specify precedence and associativity.
* Precedence Only::   How to specify precedence only.
* Precedence Examples::  How these features are used in the previous example.
* How Precedence::    How they work.
* Non Operators::     Using precedence for general conflicts.

Tuning LR

* LR Table Construction:: Choose a different construction algorithm.
* Default Reductions::    Disable default reductions.
* LAC::                   Correct lookahead sets in the parser states.
* Unreachable States::    Keep unreachable parser states for debugging.

Handling Context Dependencies

* Semantic Tokens::   Token parsing can depend on the semantic context.
* Lexical Tie-ins::   Token parsing can depend on the syntactic context.
* Tie-in Recovery::   Lexical tie-ins have implications for how
                        error recovery rules must be written.

Debugging Your Parser

* Understanding::     Understanding the structure of your parser.
* Graphviz::          Getting a visual representation of the parser.
* Xml::               Getting a markup representation of the parser.
* Tracing::           Tracing the execution of your parser.

Tracing Your Parser

* Enabling Traces::             Activating run-time trace support
* Mfcalc Traces::               Extending @code{mfcalc} to support traces
* The YYPRINT Macro::           Obsolete interface for semantic value reports

Invoking Bison

* Bison Options::     All the options described in detail,
                        in alphabetical order by short options.
* Option Cross Key::  Alphabetical list of long options.
* Yacc Library::      Yacc-compatible @code{yylex} and @code{main}.

Parsers Written In Other Languages

* C++ Parsers::                 The interface to generate C++ parser classes
* Java Parsers::                The interface to generate Java parser classes

C++ Parsers

* C++ Bison Interface::         Asking for C++ parser generation
* C++ Semantic Values::         %union vs. C++
* C++ Location Values::         The position and location classes
* C++ Parser Interface::        Instantiating and running the parser
* C++ Scanner Interface::       Exchanges between yylex and parse
* A Complete C++ Example::      Demonstrating their use

C++ Location Values

* C++ position::                One point in the source file
* C++ location::                Two points in the source file
* User Defined Location Type::  Required interface for locations

A Complete C++ Example

* Calc++ --- C++ Calculator::   The specifications
* Calc++ Parsing Driver::       An active parsing context
* Calc++ Parser::               A parser class
* Calc++ Scanner::              A pure C++ Flex scanner
* Calc++ Top Level::            Conducting the band

Java Parsers

* Java Bison Interface::        Asking for Java parser generation
* Java Semantic Values::        %type and %token vs. Java
* Java Location Values::        The position and location classes
* Java Parser Interface::       Instantiating and running the parser
* Java Scanner Interface::      Specifying the scanner for the parser
* Java Action Features::        Special features for use in actions
* Java Differences::            Differences between C/C++ and Java Grammars
* Java Declarations Summary::   List of Bison declarations used with Java

Frequently Asked Questions

* Memory Exhausted::            Breaking the Stack Limits
* How Can I Reset the Parser::  @code{yyparse} Keeps some State
* Strings are Destroyed::       @code{yylval} Loses Track of Strings
* Implementing Gotos/Loops::    Control Flow in the Calculator
* Multiple start-symbols::      Factoring closely related grammars
* Secure?  Conform?::           Is Bison POSIX safe?
* I can't build Bison::         Troubleshooting
* Where can I find help?::      Troubleshouting
* Bug Reports::                 Troublereporting
* More Languages::              Parsers in C++, Java, and so on
* Beta Testing::                Experimenting development versions
* Mailing Lists::               Meeting other Bison users

Copying This Manual

* Copying This Manual::         License for copying this manual.

@end detailmenu
@end menu

@node Introduction
@unnumbered Introduction
@cindex introduction

@dfn{Bison} is a general-purpose parser generator that converts an
annotated context-free grammar into a deterministic LR or generalized
LR (GLR) parser employing LALR(1) parser tables.  As an experimental
feature, Bison can also generate IELR(1) or canonical LR(1) parser
tables.  Once you are proficient with Bison, you can use it to develop
a wide range of language parsers, from those used in simple desk
calculators to complex programming languages.

Bison is upward compatible with Yacc: all properly-written Yacc
grammars ought to work with Bison with no change.  Anyone familiar
with Yacc should be able to use Bison with little trouble.  You need
to be fluent in C or C++ programming in order to use Bison or to
understand this manual.  Java is also supported as an experimental
feature.

We begin with tutorial chapters that explain the basic concepts of
using Bison and show three explained examples, each building on the
last.  If you don't know Bison or Yacc, start by reading these
chapters.  Reference chapters follow, which describe specific aspects
of Bison in detail.

Bison was written originally by Robert Corbett.  Richard Stallman made
it Yacc-compatible.  Wilfred Hansen of Carnegie Mellon University
added multi-character string literals and other features.  Since then,
Bison has grown more robust and evolved many other new features thanks
to the hard work of a long list of volunteers.  For details, see the
@file{THANKS} and @file{ChangeLog} files included in the Bison
distribution.

This edition corresponds to version @value{VERSION} of Bison.

@node Conditions
@unnumbered Conditions for Using Bison

The distribution terms for Bison-generated parsers permit using the
parsers in nonfree programs.  Before Bison version 2.2, these extra
permissions applied only when Bison was generating LALR(1)
parsers in C@.  And before Bison version 1.24, Bison-generated
parsers could be used only in programs that were free software.

The other GNU programming tools, such as the GNU C
compiler, have never
had such a requirement.  They could always be used for nonfree
software.  The reason Bison was different was not due to a special
policy decision; it resulted from applying the usual General Public
License to all of the Bison source code.

The main output of the Bison utility---the Bison parser implementation
file---contains a verbatim copy of a sizable piece of Bison, which is
the code for the parser's implementation.  (The actions from your
grammar are inserted into this implementation at one point, but most
of the rest of the implementation is not changed.)  When we applied
the GPL terms to the skeleton code for the parser's implementation,
the effect was to restrict the use of Bison output to free software.

We didn't change the terms because of sympathy for people who want to
make software proprietary.  @strong{Software should be free.}  But we
concluded that limiting Bison's use to free software was doing little to
encourage people to make other software free.  So we decided to make the
practical conditions for using Bison match the practical conditions for
using the other GNU tools.

This exception applies when Bison is generating code for a parser.
You can tell whether the exception applies to a Bison output file by
inspecting the file for text beginning with ``As a special
exception@dots{}''.  The text spells out the exact terms of the
exception.

@node Copying
@unnumbered GNU GENERAL PUBLIC LICENSE
@include gpl-3.0.texi

@node Concepts
@chapter The Concepts of Bison

This chapter introduces many of the basic concepts without which the
details of Bison will not make sense.  If you do not already know how to
use Bison or Yacc, we suggest you start by reading this chapter carefully.

@menu
* Language and Grammar:: Languages and context-free grammars,
                           as mathematical ideas.
* Grammar in Bison::     How we represent grammars for Bison's sake.
* Semantic Values::      Each token or syntactic grouping can have
                           a semantic value (the value of an integer,
                           the name of an identifier, etc.).
* Semantic Actions::     Each rule can have an action containing C code.
* GLR Parsers::          Writing parsers for general context-free languages.
* Locations::            Overview of location tracking.
* Bison Parser::         What are Bison's input and output,
                           how is the output used?
* Stages::               Stages in writing and running Bison grammars.
* Grammar Layout::       Overall structure of a Bison grammar file.
@end menu

@node Language and Grammar
@section Languages and Context-Free Grammars

@cindex context-free grammar
@cindex grammar, context-free
In order for Bison to parse a language, it must be described by a
@dfn{context-free grammar}.  This means that you specify one or more
@dfn{syntactic groupings} and give rules for constructing them from their
parts.  For example, in the C language, one kind of grouping is called an
`expression'.  One rule for making an expression might be, ``An expression
can be made of a minus sign and another expression''.  Another would be,
``An expression can be an integer''.  As you can see, rules are often
recursive, but there must be at least one rule which leads out of the
recursion.

@cindex BNF
@cindex Backus-Naur form
The most common formal system for presenting such rules for humans to read
is @dfn{Backus-Naur Form} or ``BNF'', which was developed in
order to specify the language Algol 60.  Any grammar expressed in
BNF is a context-free grammar.  The input to Bison is
essentially machine-readable BNF.

@cindex LALR grammars
@cindex IELR grammars
@cindex LR grammars
There are various important subclasses of context-free grammars.  Although
it can handle almost all context-free grammars, Bison is optimized for what
are called LR(1) grammars.  In brief, in these grammars, it must be possible
to tell how to parse any portion of an input string with just a single token
of lookahead.  For historical reasons, Bison by default is limited by the
additional restrictions of LALR(1), which is hard to explain simply.
@xref{Mysterious Conflicts}, for more information on this.  As an
experimental feature, you can escape these additional restrictions by
requesting IELR(1) or canonical LR(1) parser tables.  @xref{LR Table
Construction}, to learn how.

@cindex GLR parsing
@cindex generalized LR (GLR) parsing
@cindex ambiguous grammars
@cindex nondeterministic parsing

Parsers for LR(1) grammars are @dfn{deterministic}, meaning
roughly that the next grammar rule to apply at any point in the input is
uniquely determined by the preceding input and a fixed, finite portion
(called a @dfn{lookahead}) of the remaining input.  A context-free
grammar can be @dfn{ambiguous}, meaning that there are multiple ways to
apply the grammar rules to get the same inputs.  Even unambiguous
grammars can be @dfn{nondeterministic}, meaning that no fixed
lookahead always suffices to determine the next grammar rule to apply.
With the proper declarations, Bison is also able to parse these more
general context-free grammars, using a technique known as GLR
parsing (for Generalized LR).  Bison's GLR parsers
are able to handle any context-free grammar for which the number of
possible parses of any given string is finite.

@cindex symbols (abstract)
@cindex token
@cindex syntactic grouping
@cindex grouping, syntactic
In the formal grammatical rules for a language, each kind of syntactic
unit or grouping is named by a @dfn{symbol}.  Those which are built by
grouping smaller constructs according to grammatical rules are called
@dfn{nonterminal symbols}; those which can't be subdivided are called
@dfn{terminal symbols} or @dfn{token types}.  We call a piece of input
corresponding to a single terminal symbol a @dfn{token}, and a piece
corresponding to a single nonterminal symbol a @dfn{grouping}.

We can use the C language as an example of what symbols, terminal and
nonterminal, mean.  The tokens of C are identifiers, constants (numeric
and string), and the various keywords, arithmetic operators and
punctuation marks.  So the terminal symbols of a grammar for C include
`identifier', `number', `string', plus one symbol for each keyword,
operator or punctuation mark: `if', `return', `const', `static', `int',
`char', `plus-sign', `open-brace', `close-brace', `comma' and many more.
(These tokens can be subdivided into characters, but that is a matter of
lexicography, not grammar.)

Here is a simple C function subdivided into tokens:

@example
int             /* @r{keyword `int'} */
square (int x)  /* @r{identifier, open-paren, keyword `int',}
                   @r{identifier, close-paren} */
@{               /* @r{open-brace} */
  return x * x; /* @r{keyword `return', identifier, asterisk,}
                   @r{identifier, semicolon} */
@}               /* @r{close-brace} */
@end example

The syntactic groupings of C include the expression, the statement, the
declaration, and the function definition.  These are represented in the
grammar of C by nonterminal symbols `expression', `statement',
`declaration' and `function definition'.  The full grammar uses dozens of
additional language constructs, each with its own nonterminal symbol, in
order to express the meanings of these four.  The example above is a
function definition; it contains one declaration, and one statement.  In
the statement, each @samp{x} is an expression and so is @samp{x * x}.

Each nonterminal symbol must have grammatical rules showing how it is made
out of simpler constructs.  For example, one kind of C statement is the
@code{return} statement; this would be described with a grammar rule which
reads informally as follows:

@quotation
A `statement' can be made of a `return' keyword, an `expression' and a
`semicolon'.
@end quotation

@noindent
There would be many other rules for `statement', one for each kind of
statement in C.

@cindex start symbol
One nonterminal symbol must be distinguished as the special one which
defines a complete utterance in the language.  It is called the @dfn{start
symbol}.  In a compiler, this means a complete input program.  In the C
language, the nonterminal symbol `sequence of definitions and declarations'
plays this role.

For example, @samp{1 + 2} is a valid C expression---a valid part of a C
program---but it is not valid as an @emph{entire} C program.  In the
context-free grammar of C, this follows from the fact that `expression' is
not the start symbol.

The Bison parser reads a sequence of tokens as its input, and groups the
tokens using the grammar rules.  If the input is valid, the end result is
that the entire token sequence reduces to a single grouping whose symbol is
the grammar's start symbol.  If we use a grammar for C, the entire input
must be a `sequence of definitions and declarations'.  If not, the parser
reports a syntax error.

@node Grammar in Bison
@section From Formal Rules to Bison Input
@cindex Bison grammar
@cindex grammar, Bison
@cindex formal grammar

A formal grammar is a mathematical construct.  To define the language
for Bison, you must write a file expressing the grammar in Bison syntax:
a @dfn{Bison grammar} file.  @xref{Grammar File, ,Bison Grammar Files}.

A nonterminal symbol in the formal grammar is represented in Bison input
as an identifier, like an identifier in C@.  By convention, it should be
in lower case, such as @code{expr}, @code{stmt} or @code{declaration}.

The Bison representation for a terminal symbol is also called a @dfn{token
type}.  Token types as well can be represented as C-like identifiers.  By
convention, these identifiers should be upper case to distinguish them from
nonterminals: for example, @code{INTEGER}, @code{IDENTIFIER}, @code{IF} or
@code{RETURN}.  A terminal symbol that stands for a particular keyword in
the language should be named after that keyword converted to upper case.
The terminal symbol @code{error} is reserved for error recovery.
@xref{Symbols}.

A terminal symbol can also be represented as a character literal, just like
a C character constant.  You should do this whenever a token is just a
single character (parenthesis, plus-sign, etc.): use that same character in
a literal as the terminal symbol for that token.

A third way to represent a terminal symbol is with a C string constant
containing several characters.  @xref{Symbols}, for more information.

The grammar rules also have an expression in Bison syntax.  For example,
here is the Bison rule for a C @code{return} statement.  The semicolon in
quotes is a literal character token, representing part of the C syntax for
the statement; the naked semicolon, and the colon, are Bison punctuation
used in every rule.

@example
stmt: RETURN expr ';' ;
@end example

@noindent
@xref{Rules, ,Syntax of Grammar Rules}.

@node Semantic Values
@section Semantic Values
@cindex semantic value
@cindex value, semantic

A formal grammar selects tokens only by their classifications: for example,
if a rule mentions the terminal symbol `integer constant', it means that
@emph{any} integer constant is grammatically valid in that position.  The
precise value of the constant is irrelevant to how to parse the input: if
@samp{x+4} is grammatical then @samp{x+1} or @samp{x+3989} is equally
grammatical.

But the precise value is very important for what the input means once it is
parsed.  A compiler is useless if it fails to distinguish between 4, 1 and
3989 as constants in the program!  Therefore, each token in a Bison grammar
has both a token type and a @dfn{semantic value}.  @xref{Semantics,
,Defining Language Semantics},
for details.

The token type is a terminal symbol defined in the grammar, such as
@code{INTEGER}, @code{IDENTIFIER} or @code{','}.  It tells everything
you need to know to decide where the token may validly appear and how to
group it with other tokens.  The grammar rules know nothing about tokens
except their types.

The semantic value has all the rest of the information about the
meaning of the token, such as the value of an integer, or the name of an
identifier.  (A token such as @code{','} which is just punctuation doesn't
need to have any semantic value.)

For example, an input token might be classified as token type
@code{INTEGER} and have the semantic value 4.  Another input token might
have the same token type @code{INTEGER} but value 3989.  When a grammar
rule says that @code{INTEGER} is allowed, either of these tokens is
acceptable because each is an @code{INTEGER}.  When the parser accepts the
token, it keeps track of the token's semantic value.

Each grouping can also have a semantic value as well as its nonterminal
symbol.  For example, in a calculator, an expression typically has a
semantic value that is a number.  In a compiler for a programming
language, an expression typically has a semantic value that is a tree
structure describing the meaning of the expression.

@node Semantic Actions
@section Semantic Actions
@cindex semantic actions
@cindex actions, semantic

In order to be useful, a program must do more than parse input; it must
also produce some output based on the input.  In a Bison grammar, a grammar
rule can have an @dfn{action} made up of C statements.  Each time the
parser recognizes a match for that rule, the action is executed.
@xref{Actions}.

Most of the time, the purpose of an action is to compute the semantic value
of the whole construct from the semantic values of its parts.  For example,
suppose we have a rule which says an expression can be the sum of two
expressions.  When the parser recognizes such a sum, each of the
subexpressions has a semantic value which describes how it was built up.
The action for this rule should create a similar sort of value for the
newly recognized larger expression.

For example, here is a rule that says an expression can be the sum of
two subexpressions:

@example
expr: expr '+' expr   @{ $$ = $1 + $3; @} ;
@end example

@noindent
The action says how to produce the semantic value of the sum expression
from the values of the two subexpressions.

@node GLR Parsers
@section Writing GLR Parsers
@cindex GLR parsing
@cindex generalized LR (GLR) parsing
@findex %glr-parser
@cindex conflicts
@cindex shift/reduce conflicts
@cindex reduce/reduce conflicts

In some grammars, Bison's deterministic
LR(1) parsing algorithm cannot decide whether to apply a
certain grammar rule at a given point.  That is, it may not be able to
decide (on the basis of the input read so far) which of two possible
reductions (applications of a grammar rule) applies, or whether to apply
a reduction or read more of the input and apply a reduction later in the
input.  These are known respectively as @dfn{reduce/reduce} conflicts
(@pxref{Reduce/Reduce}), and @dfn{shift/reduce} conflicts
(@pxref{Shift/Reduce}).

To use a grammar that is not easily modified to be LR(1), a
more general parsing algorithm is sometimes necessary.  If you include
@code{%glr-parser} among the Bison declarations in your file
(@pxref{Grammar Outline}), the result is a Generalized LR
(GLR) parser.  These parsers handle Bison grammars that
contain no unresolved conflicts (i.e., after applying precedence
declarations) identically to deterministic parsers.  However, when
faced with unresolved shift/reduce and reduce/reduce conflicts,
GLR parsers use the simple expedient of doing both,
effectively cloning the parser to follow both possibilities.  Each of
the resulting parsers can again split, so that at any given time, there
can be any number of possible parses being explored.  The parsers
proceed in lockstep; that is, all of them consume (shift) a given input
symbol before any of them proceed to the next.  Each of the cloned
parsers eventually meets one of two possible fates: either it runs into
a parsing error, in which case it simply vanishes, or it merges with
another parser, because the two of them have reduced the input to an
identical set of symbols.

During the time that there are multiple parsers, semantic actions are
recorded, but not performed.  When a parser disappears, its recorded
semantic actions disappear as well, and are never performed.  When a
reduction makes two parsers identical, causing them to merge, Bison
records both sets of semantic actions.  Whenever the last two parsers
merge, reverting to the single-parser case, Bison resolves all the
outstanding actions either by precedences given to the grammar rules
involved, or by performing both actions, and then calling a designated
user-defined function on the resulting values to produce an arbitrary
merged result.

@menu
* Simple GLR Parsers::     Using GLR parsers on unambiguous grammars.
* Merging GLR Parses::     Using GLR parsers to resolve ambiguities.
* GLR Semantic Actions::   Considerations for semantic values and deferred actions.
* Semantic Predicates::    Controlling a parse with arbitrary computations.
* Compiler Requirements::  GLR parsers require a modern C compiler.
@end menu

@node Simple GLR Parsers
@subsection Using GLR on Unambiguous Grammars
@cindex GLR parsing, unambiguous grammars
@cindex generalized LR (GLR) parsing, unambiguous grammars
@findex %glr-parser
@findex %expect-rr
@cindex conflicts
@cindex reduce/reduce conflicts
@cindex shift/reduce conflicts

In the simplest cases, you can use the GLR algorithm
to parse grammars that are unambiguous but fail to be LR(1).
Such grammars typically require more than one symbol of lookahead.

Consider a problem that
arises in the declaration of enumerated and subrange types in the
programming language Pascal.  Here are some examples:

@example
type subrange = lo .. hi;
type enum = (a, b, c);
@end example

@noindent
The original language standard allows only numeric
literals and constant identifiers for the subrange bounds (@samp{lo}
and @samp{hi}), but Extended Pascal (ISO/IEC
10206) and many other
Pascal implementations allow arbitrary expressions there.  This gives
rise to the following situation, containing a superfluous pair of
parentheses:

@example
type subrange = (a) .. b;
@end example

@noindent
Compare this to the following declaration of an enumerated
type with only one value:

@example
type enum = (a);
@end example

@noindent
(These declarations are contrived, but they are syntactically
valid, and more-complicated cases can come up in practical programs.)

These two declarations look identical until the @samp{..} token.
With normal LR(1) one-token lookahead it is not
possible to decide between the two forms when the identifier
@samp{a} is parsed.  It is, however, desirable
for a parser to decide this, since in the latter case
@samp{a} must become a new identifier to represent the enumeration
value, while in the former case @samp{a} must be evaluated with its
current meaning, which may be a constant or even a function call.

You could parse @samp{(a)} as an ``unspecified identifier in parentheses'',
to be resolved later, but this typically requires substantial
contortions in both semantic actions and large parts of the
grammar, where the parentheses are nested in the recursive rules for
expressions.

You might think of using the lexer to distinguish between the two
forms by returning different tokens for currently defined and
undefined identifiers.  But if these declarations occur in a local
scope, and @samp{a} is defined in an outer scope, then both forms
are possible---either locally redefining @samp{a}, or using the
value of @samp{a} from the outer scope.  So this approach cannot
work.

A simple solution to this problem is to declare the parser to
use the GLR algorithm.
When the GLR parser reaches the critical state, it
merely splits into two branches and pursues both syntax rules
simultaneously.  Sooner or later, one of them runs into a parsing
error.  If there is a @samp{..} token before the next
@samp{;}, the rule for enumerated types fails since it cannot
accept @samp{..} anywhere; otherwise, the subrange type rule
fails since it requires a @samp{..} token.  So one of the branches
fails silently, and the other one continues normally, performing
all the intermediate actions that were postponed during the split.

If the input is syntactically incorrect, both branches fail and the parser
reports a syntax error as usual.

The effect of all this is that the parser seems to ``guess'' the
correct branch to take, or in other words, it seems to use more
lookahead than the underlying LR(1) algorithm actually allows
for.  In this example, LR(2) would suffice, but also some cases
that are not LR(@math{k}) for any @math{k} can be handled this way.

In general, a GLR parser can take quadratic or cubic worst-case time,
and the current Bison parser even takes exponential time and space
for some grammars.  In practice, this rarely happens, and for many
grammars it is possible to prove that it cannot happen.
The present example contains only one conflict between two
rules, and the type-declaration context containing the conflict
cannot be nested.  So the number of
branches that can exist at any time is limited by the constant 2,
and the parsing time is still linear.

Here is a Bison grammar corresponding to the example above.  It
parses a vastly simplified form of Pascal type declarations.

@example
%token TYPE DOTDOT ID

@group
%left '+' '-'
%left '*' '/'
@end group

%%
type_decl: TYPE ID '=' type ';' ;

@group
type:
  '(' id_list ')'
| expr DOTDOT expr
;
@end group

@group
id_list:
  ID
| id_list ',' ID
;
@end group

@group
expr:
  '(' expr ')'
| expr '+' expr
| expr '-' expr
| expr '*' expr
| expr '/' expr
| ID
;
@end group
@end example

When used as a normal LR(1) grammar, Bison correctly complains
about one reduce/reduce conflict.  In the conflicting situation the
parser chooses one of the alternatives, arbitrarily the one
declared first.  Therefore the following correct input is not
recognized:

@example
type t = (a) .. b;
@end example

The parser can be turned into a GLR parser, while also telling Bison
to be silent about the one known reduce/reduce conflict, by adding
these two declarations to the Bison grammar file (before the first
@samp{%%}):

@example
%glr-parser
%expect-rr 1
@end example

@noindent
No change in the grammar itself is required.  Now the
parser recognizes all valid declarations, according to the
limited syntax above, transparently.  In fact, the user does not even
notice when the parser splits.

So here we have a case where we can use the benefits of GLR,
almost without disadvantages.  Even in simple cases like this, however,
there are at least two potential problems to beware.  First, always
analyze the conflicts reported by Bison to make sure that GLR
splitting is only done where it is intended.  A GLR parser
splitting inadvertently may cause problems less obvious than an
LR parser statically choosing the wrong alternative in a
conflict.  Second, consider interactions with the lexer (@pxref{Semantic
Tokens}) with great care.  Since a split parser consumes tokens without
performing any actions during the split, the lexer cannot obtain
information via parser actions.  Some cases of lexer interactions can be
eliminated by using GLR to shift the complications from the
lexer to the parser.  You must check the remaining cases for
correctness.

In our example, it would be safe for the lexer to return tokens based on
their current meanings in some symbol table, because no new symbols are
defined in the middle of a type declaration.  Though it is possible for
a parser to define the enumeration constants as they are parsed, before
the type declaration is completed, it actually makes no difference since
they cannot be used within the same enumerated type declaration.

@node Merging GLR Parses
@subsection Using GLR to Resolve Ambiguities
@cindex GLR parsing, ambiguous grammars
@cindex generalized LR (GLR) parsing, ambiguous grammars
@findex %dprec
@findex %merge
@cindex conflicts
@cindex reduce/reduce conflicts

Let's consider an example, vastly simplified from a C++ grammar.

@example
%@{
  #include <stdio.h>
  #define YYSTYPE char const *
  int yylex (void);
  void yyerror (char const *);
%@}

%token TYPENAME ID

%right '='
%left '+'

%glr-parser

%%

prog:
  %empty
| prog stmt   @{ printf ("\n"); @}
;

stmt:
  expr ';'  %dprec 1
| decl      %dprec 2
;

expr:
  ID               @{ printf ("%s ", $$); @}
| TYPENAME '(' expr ')'
                   @{ printf ("%s <cast> ", $1); @}
| expr '+' expr    @{ printf ("+ "); @}
| expr '=' expr    @{ printf ("= "); @}
;

decl:
  TYPENAME declarator ';'
                   @{ printf ("%s <declare> ", $1); @}
| TYPENAME declarator '=' expr ';'
                   @{ printf ("%s <init-declare> ", $1); @}
;

declarator:
  ID               @{ printf ("\"%s\" ", $1); @}
| '(' declarator ')'
;
@end example

@noindent
This models a problematic part of the C++ grammar---the ambiguity between
certain declarations and statements.  For example,

@example
T (x) = y+z;
@end example

@noindent
parses as either an @code{expr} or a @code{stmt}
(assuming that @samp{T} is recognized as a @code{TYPENAME} and
@samp{x} as an @code{ID}).
Bison detects this as a reduce/reduce conflict between the rules
@code{expr : ID} and @code{declarator : ID}, which it cannot resolve at the
time it encounters @code{x} in the example above.  Since this is a
GLR parser, it therefore splits the problem into two parses, one for
each choice of resolving the reduce/reduce conflict.
Unlike the example from the previous section (@pxref{Simple GLR Parsers}),
however, neither of these parses ``dies,'' because the grammar as it stands is
ambiguous.  One of the parsers eventually reduces @code{stmt : expr ';'} and
the other reduces @code{stmt : decl}, after which both parsers are in an
identical state: they've seen @samp{prog stmt} and have the same unprocessed
input remaining.  We say that these parses have @dfn{merged.}

At this point, the GLR parser requires a specification in the
grammar of how to choose between the competing parses.
In the example above, the two @code{%dprec}
declarations specify that Bison is to give precedence
to the parse that interprets the example as a
@code{decl}, which implies that @code{x} is a declarator.
The parser therefore prints

@example
"x" y z + T <init-declare>
@end example

The @code{%dprec} declarations only come into play when more than one
parse survives.  Consider a different input string for this parser:

@example
T (x) + y;
@end example

@noindent
This is another example of using GLR to parse an unambiguous
construct, as shown in the previous section (@pxref{Simple GLR Parsers}).
Here, there is no ambiguity (this cannot be parsed as a declaration).
However, at the time the Bison parser encounters @code{x}, it does not
have enough information to resolve the reduce/reduce conflict (again,
between @code{x} as an @code{expr} or a @code{declarator}).  In this
case, no precedence declaration is used.  Again, the parser splits
into two, one assuming that @code{x} is an @code{expr}, and the other
assuming @code{x} is a @code{declarator}.  The second of these parsers
then vanishes when it sees @code{+}, and the parser prints

@example
x T <cast> y +
@end example

Suppose that instead of resolving the ambiguity, you wanted to see all
the possibilities.  For this purpose, you must merge the semantic
actions of the two possible parsers, rather than choosing one over the
other.  To do so, you could change the declaration of @code{stmt} as
follows:

@example
stmt:
  expr ';'  %merge <stmtMerge>
| decl      %merge <stmtMerge>
;
@end example

@noindent
and define the @code{stmtMerge} function as:

@example
static YYSTYPE
stmtMerge (YYSTYPE x0, YYSTYPE x1)
@{
  printf ("<OR> ");
  return "";
@}
@end example

@noindent
with an accompanying forward declaration
in the C declarations at the beginning of the file:

@example
%@{
  #define YYSTYPE char const *
  static YYSTYPE stmtMerge (YYSTYPE x0, YYSTYPE x1);
%@}
@end example

@noindent
With these declarations, the resulting parser parses the first example
as both an @code{expr} and a @code{decl}, and prints

@example
"x" y z + T <init-declare> x T <cast> y z + = <OR>
@end example

Bison requires that all of the
productions that participate in any particular merge have identical
@samp{%merge} clauses.  Otherwise, the ambiguity would be unresolvable,
and the parser will report an error during any parse that results in
the offending merge.

@node GLR Semantic Actions
@subsection GLR Semantic Actions

The nature of GLR parsing and the structure of the generated
parsers give rise to certain restrictions on semantic values and actions.

@subsubsection Deferred semantic actions
@cindex deferred semantic actions
By definition, a deferred semantic action is not performed at the same time as
the associated reduction.
This raises caveats for several Bison features you might use in a semantic
action in a GLR parser.

@vindex yychar
@cindex GLR parsers and @code{yychar}
@vindex yylval
@cindex GLR parsers and @code{yylval}
@vindex yylloc
@cindex GLR parsers and @code{yylloc}
In any semantic action, you can examine @code{yychar} to determine the type of
the lookahead token present at the time of the associated reduction.
After checking that @code{yychar} is not set to @code{YYEMPTY} or @code{YYEOF},
you can then examine @code{yylval} and @code{yylloc} to determine the
lookahead token's semantic value and location, if any.
In a nondeferred semantic action, you can also modify any of these variables to
influence syntax analysis.
@xref{Lookahead, ,Lookahead Tokens}.

@findex yyclearin
@cindex GLR parsers and @code{yyclearin}
In a deferred semantic action, it's too late to influence syntax analysis.
In this case, @code{yychar}, @code{yylval}, and @code{yylloc} are set to
shallow copies of the values they had at the time of the associated reduction.
For this reason alone, modifying them is dangerous.
Moreover, the result of modifying them is undefined and subject to change with
future versions of Bison.
For example, if a semantic action might be deferred, you should never write it
to invoke @code{yyclearin} (@pxref{Action Features}) or to attempt to free
memory referenced by @code{yylval}.

@subsubsection YYERROR
@findex YYERROR
@cindex GLR parsers and @code{YYERROR}
Another Bison feature requiring special consideration is @code{YYERROR}
(@pxref{Action Features}), which you can invoke in a semantic action to
initiate error recovery.
During deterministic GLR operation, the effect of @code{YYERROR} is
the same as its effect in a deterministic parser.
The effect in a deferred action is similar, but the precise point of the
error is undefined;  instead, the parser reverts to deterministic operation,
selecting an unspecified stack on which to continue with a syntax error.
In a semantic predicate (see @ref{Semantic Predicates}) during nondeterministic
parsing, @code{YYERROR} silently prunes
the parse that invoked the test.

@subsubsection Restrictions on semantic values and locations
GLR parsers require that you use POD (Plain Old Data) types for
semantic values and location types when using the generated parsers as
C++ code.

@node Semantic Predicates
@subsection Controlling a Parse with Arbitrary Predicates
@findex %?
@cindex Semantic predicates in GLR parsers

In addition to the @code{%dprec} and @code{%merge} directives,
GLR parsers
allow you to reject parses on the basis of arbitrary computations executed
in user code, without having Bison treat this rejection as an error
if there are alternative parses. (This feature is experimental and may
evolve.  We welcome user feedback.)  For example,

@example
widget:
  %?@{  new_syntax @} "widget" id new_args  @{ $$ = f($3, $4); @}
| %?@{ !new_syntax @} "widget" id old_args  @{ $$ = f($3, $4); @}
;
@end example

@noindent
is one way to allow the same parser to handle two different syntaxes for
widgets.  The clause preceded by @code{%?} is treated like an ordinary
action, except that its text is treated as an expression and is always
evaluated immediately (even when in nondeterministic mode).  If the
expression yields 0 (false), the clause is treated as a syntax error,
which, in a nondeterministic parser, causes the stack in which it is reduced
to die.  In a deterministic parser, it acts like YYERROR.

As the example shows, predicates otherwise look like semantic actions, and
therefore you must be take them into account when determining the numbers
to use for denoting the semantic values of right-hand side symbols.
Predicate actions, however, have no defined value, and may not be given
labels.

There is a subtle difference between semantic predicates and ordinary
actions in nondeterministic mode, since the latter are deferred.
For example, we could try to rewrite the previous example as

@example
widget:
  @{ if (!new_syntax) YYERROR; @}
    "widget" id new_args  @{ $$ = f($3, $4); @}
|  @{ if (new_syntax) YYERROR; @}
    "widget" id old_args   @{ $$ = f($3, $4); @}
;
@end example

@noindent
(reversing the sense of the predicate tests to cause an error when they are
false).  However, this
does @emph{not} have the same effect if @code{new_args} and @code{old_args}
have overlapping syntax.
Since the mid-rule actions testing @code{new_syntax} are deferred,
a GLR parser first encounters the unresolved ambiguous reduction
for cases where @code{new_args} and @code{old_args} recognize the same string
@emph{before} performing the tests of @code{new_syntax}.  It therefore
reports an error.

Finally, be careful in writing predicates: deferred actions have not been
evaluated, so that using them in a predicate will have undefined effects.

@node Compiler Requirements
@subsection Considerations when Compiling GLR Parsers
@cindex @code{inline}
@cindex GLR parsers and @code{inline}

The GLR parsers require a compiler for ISO C89 or
later.  In addition, they use the @code{inline} keyword, which is not
C89, but is C99 and is a common extension in pre-C99 compilers.  It is
up to the user of these parsers to handle
portability issues.  For instance, if using Autoconf and the Autoconf
macro @code{AC_C_INLINE}, a mere

@example
%@{
  #include <config.h>
%@}
@end example

@noindent
will suffice.  Otherwise, we suggest

@example
%@{
  #if (__STDC_VERSION__ < 199901 && ! defined __GNUC__ \
       && ! defined inline)
  # define inline
  #endif
%@}
@end example

@node Locations
@section Locations
@cindex location
@cindex textual location
@cindex location, textual

Many applications, like interpreters or compilers, have to produce verbose
and useful error messages.  To achieve this, one must be able to keep track of
the @dfn{textual location}, or @dfn{location}, of each syntactic construct.
Bison provides a mechanism for handling these locations.

Each token has a semantic value.  In a similar fashion, each token has an
associated location, but the type of locations is the same for all tokens
and groupings.  Moreover, the output parser is equipped with a default data
structure for storing locations (@pxref{Tracking Locations}, for more
details).

Like semantic values, locations can be reached in actions using a dedicated
set of constructs.  In the example above, the location of the whole grouping
is @code{@@$}, while the locations of the subexpressions are @code{@@1} and
@code{@@3}.

When a rule is matched, a default action is used to compute the semantic value
of its left hand side (@pxref{Actions}).  In the same way, another default
action is used for locations.  However, the action for locations is general
enough for most cases, meaning there is usually no need to describe for each
rule how @code{@@$} should be formed.  When building a new location for a given
grouping, the default behavior of the output parser is to take the beginning
of the first symbol, and the end of the last symbol.

@node Bison Parser
@section Bison Output: the Parser Implementation File
@cindex Bison parser
@cindex Bison utility
@cindex lexical analyzer, purpose
@cindex parser

When you run Bison, you give it a Bison grammar file as input.  The
most important output is a C source file that implements a parser for
the language described by the grammar.  This parser is called a
@dfn{Bison parser}, and this file is called a @dfn{Bison parser
implementation file}.  Keep in mind that the Bison utility and the
Bison parser are two distinct programs: the Bison utility is a program
whose output is the Bison parser implementation file that becomes part
of your program.

The job of the Bison parser is to group tokens into groupings according to
the grammar rules---for example, to build identifiers and operators into
expressions.  As it does this, it runs the actions for the grammar rules it
uses.

The tokens come from a function called the @dfn{lexical analyzer} that
you must supply in some fashion (such as by writing it in C).  The Bison
parser calls the lexical analyzer each time it wants a new token.  It
doesn't know what is ``inside'' the tokens (though their semantic values
may reflect this).  Typically the lexical analyzer makes the tokens by
parsing characters of text, but Bison does not depend on this.
@xref{Lexical, ,The Lexical Analyzer Function @code{yylex}}.

The Bison parser implementation file is C code which defines a
function named @code{yyparse} which implements that grammar.  This
function does not make a complete C program: you must supply some
additional functions.  One is the lexical analyzer.  Another is an
error-reporting function which the parser calls to report an error.
In addition, a complete C program must start with a function called
@code{main}; you have to provide this, and arrange for it to call
@code{yyparse} or the parser will never run.  @xref{Interface, ,Parser
C-Language Interface}.

Aside from the token type names and the symbols in the actions you
write, all symbols defined in the Bison parser implementation file
itself begin with @samp{yy} or @samp{YY}.  This includes interface
functions such as the lexical analyzer function @code{yylex}, the
error reporting function @code{yyerror} and the parser function
@code{yyparse} itself.  This also includes numerous identifiers used
for internal purposes.  Therefore, you should avoid using C
identifiers starting with @samp{yy} or @samp{YY} in the Bison grammar
file except for the ones defined in this manual.  Also, you should
avoid using the C identifiers @samp{malloc} and @samp{free} for
anything other than their usual meanings.

In some cases the Bison parser implementation file includes system
headers, and in those cases your code should respect the identifiers
reserved by those headers.  On some non-GNU hosts, @code{<alloca.h>},
@code{<malloc.h>}, @code{<stddef.h>}, and @code{<stdlib.h>} are
included as needed to declare memory allocators and related types.
@code{<libintl.h>} is included if message translation is in use
(@pxref{Internationalization}).  Other system headers may be included
if you define @code{YYDEBUG} to a nonzero value (@pxref{Tracing,
,Tracing Your Parser}).

@node Stages
@section Stages in Using Bison
@cindex stages in using Bison
@cindex using Bison

The actual language-design process using Bison, from grammar specification
to a working compiler or interpreter, has these parts:

@enumerate
@item
Formally specify the grammar in a form recognized by Bison
(@pxref{Grammar File, ,Bison Grammar Files}).  For each grammatical rule
in the language, describe the action that is to be taken when an
instance of that rule is recognized.  The action is described by a
sequence of C statements.

@item
Write a lexical analyzer to process input and pass tokens to the parser.
The lexical analyzer may be written by hand in C (@pxref{Lexical, ,The
Lexical Analyzer Function @code{yylex}}).  It could also be produced
using Lex, but the use of Lex is not discussed in this manual.

@item
Write a controlling function that calls the Bison-produced parser.

@item
Write error-reporting routines.
@end enumerate

To turn this source code as written into a runnable program, you
must follow these steps:

@enumerate
@item
Run Bison on the grammar to produce the parser.

@item
Compile the code output by Bison, as well as any other source files.

@item
Link the object files to produce the finished product.
@end enumerate

@node Grammar Layout
@section The Overall Layout of a Bison Grammar
@cindex grammar file
@cindex file format
@cindex format of grammar file
@cindex layout of Bison grammar

The input file for the Bison utility is a @dfn{Bison grammar file}.  The
general form of a Bison grammar file is as follows:

@example
%@{
@var{Prologue}
%@}

@var{Bison declarations}

%%
@var{Grammar rules}
%%
@var{Epilogue}
@end example

@noindent
The @samp{%%}, @samp{%@{} and @samp{%@}} are punctuation that appears
in every Bison grammar file to separate the sections.

The prologue may define types and variables used in the actions.  You can
also use preprocessor commands to define macros used there, and use
@code{#include} to include header files that do any of these things.
You need to declare the lexical analyzer @code{yylex} and the error
printer @code{yyerror} here, along with any other global identifiers
used by the actions in the grammar rules.

The Bison declarations declare the names of the terminal and nonterminal
symbols, and may also describe operator precedence and the data types of
semantic values of various symbols.

The grammar rules define how to construct each nonterminal symbol from its
parts.

The epilogue can contain any code you want to use.  Often the
definitions of functions declared in the prologue go here.  In a
simple program, all the rest of the program can go here.

@node Examples
@chapter Examples
@cindex simple examples
@cindex examples, simple

Now we show and explain several sample programs written using Bison: a
reverse polish notation calculator, an algebraic (infix) notation
calculator --- later extended to track ``locations'' ---
and a multi-function calculator.  All
produce usable, though limited, interactive desk-top calculators.

These examples are simple, but Bison grammars for real programming
languages are written the same way.  You can copy these examples into a
source file to try them.

@menu
* RPN Calc::               Reverse polish notation calculator;
                             a first example with no operator precedence.
* Infix Calc::             Infix (algebraic) notation calculator.
                             Operator precedence is introduced.
* Simple Error Recovery::  Continuing after syntax errors.
* Location Tracking Calc:: Demonstrating the use of @@@var{n} and @@$.
* Multi-function Calc::    Calculator with memory and trig functions.
                             It uses multiple data-types for semantic values.
* Exercises::              Ideas for improving the multi-function calculator.
@end menu

@node RPN Calc
@section Reverse Polish Notation Calculator
@cindex reverse polish notation
@cindex polish notation calculator
@cindex @code{rpcalc}
@cindex calculator, simple

The first example is that of a simple double-precision @dfn{reverse polish
notation} calculator (a calculator using postfix operators).  This example
provides a good starting point, since operator precedence is not an issue.
The second example will illustrate how operator precedence is handled.

The source code for this calculator is named @file{rpcalc.y}.  The
@samp{.y} extension is a convention used for Bison grammar files.

@menu
* Rpcalc Declarations::    Prologue (declarations) for rpcalc.
* Rpcalc Rules::           Grammar Rules for rpcalc, with explanation.
* Rpcalc Lexer::           The lexical analyzer.
* Rpcalc Main::            The controlling function.
* Rpcalc Error::           The error reporting function.
* Rpcalc Generate::        Running Bison on the grammar file.
* Rpcalc Compile::         Run the C compiler on the output code.
@end menu

@node Rpcalc Declarations
@subsection Declarations for @code{rpcalc}

Here are the C and Bison declarations for the reverse polish notation
calculator.  As in C, comments are placed between @samp{/*@dots{}*/}.

@comment file: rpcalc.y
@example
/* Reverse polish notation calculator.  */

@group
%@{
  #include <stdio.h>
  #include <math.h>
  int yylex (void);
  void yyerror (char const *);
%@}
@end group

%define api.value.type @{double@}
%token NUM

%% /* Grammar rules and actions follow.  */
@end example

The declarations section (@pxref{Prologue, , The prologue}) contains two
preprocessor directives and two forward declarations.

The @code{#include} directive is used to declare the exponentiation
function @code{pow}.

The forward declarations for @code{yylex} and @code{yyerror} are
needed because the C language requires that functions be declared
before they are used.  These functions will be defined in the
epilogue, but the parser calls them so they must be declared in the
prologue.

The second section, Bison declarations, provides information to Bison about
the tokens and their types (@pxref{Bison Declarations, ,The Bison
Declarations Section}).

The @code{%define} directive defines the variable @code{api.value.type},
thus specifying the C data type for semantic values of both tokens and
groupings (@pxref{Value Type, ,Data Types of Semantic Values}).  The Bison
parser will use whatever type @code{api.value.type} is defined as; if you
don't define it, @code{int} is the default.  Because we specify
@samp{@{double@}}, each token and each expression has an associated value,
which is a floating point number.  C code can use @code{YYSTYPE} to refer to
the value @code{api.value.type}.

Each terminal symbol that is not a single-character literal must be
declared.  (Single-character literals normally don't need to be declared.)
In this example, all the arithmetic operators are designated by
single-character literals, so the only terminal symbol that needs to be
declared is @code{NUM}, the token type for numeric constants.

@node Rpcalc Rules
@subsection Grammar Rules for @code{rpcalc}

Here are the grammar rules for the reverse polish notation calculator.

@comment file: rpcalc.y
@example
@group
input:
  %empty
| input line
;
@end group

@group
line:
  '\n'
| exp '\n'      @{ printf ("%.10g\n", $1); @}
;
@end group

@group
exp:
  NUM           @{ $$ = $1;           @}
| exp exp '+'   @{ $$ = $1 + $2;      @}
| exp exp '-'   @{ $$ = $1 - $2;      @}
| exp exp '*'   @{ $$ = $1 * $2;      @}
| exp exp '/'   @{ $$ = $1 / $2;      @}
| exp exp '^'   @{ $$ = pow ($1, $2); @}  /* Exponentiation */
| exp 'n'       @{ $$ = -$1;          @}  /* Unary minus    */
;
@end group
%%
@end example

The groupings of the rpcalc ``language'' defined here are the expression
(given the name @code{exp}), the line of input (@code{line}), and the
complete input transcript (@code{input}).  Each of these nonterminal
symbols has several alternate rules, joined by the vertical bar @samp{|}
which is read as ``or''.  The following sections explain what these rules
mean.

The semantics of the language is determined by the actions taken when a
grouping is recognized.  The actions are the C code that appears inside
braces.  @xref{Actions}.

You must specify these actions in C, but Bison provides the means for
passing semantic values between the rules.  In each action, the
pseudo-variable @code{$$} stands for the semantic value for the grouping
that the rule is going to construct.  Assigning a value to @code{$$} is the
main job of most actions.  The semantic values of the components of the
rule are referred to as @code{$1}, @code{$2}, and so on.

@menu
* Rpcalc Input::            Explanation of the @code{input} nonterminal
* Rpcalc Line::             Explanation of the @code{line} nonterminal
* Rpcalc Expr::             Explanation of the @code{expr} nonterminal
@end menu

@node Rpcalc Input
@subsubsection Explanation of @code{input}

Consider the definition of @code{input}:

@example
input:
  %empty
| input line
;
@end example

This definition reads as follows: ``A complete input is either an empty
string, or a complete input followed by an input line''.  Notice that
``complete input'' is defined in terms of itself.  This definition is said
to be @dfn{left recursive} since @code{input} appears always as the
leftmost symbol in the sequence.  @xref{Recursion, ,Recursive Rules}.

The first alternative is empty because there are no symbols between the
colon and the first @samp{|}; this means that @code{input} can match an
empty string of input (no tokens).  We write the rules this way because it
is legitimate to type @kbd{Ctrl-d} right after you start the calculator.
It's conventional to put an empty alternative first and to use the
(optional) @code{%empty} directive, or to write the comment @samp{/* empty
*/} in it (@pxref{Empty Rules}).

The second alternate rule (@code{input line}) handles all nontrivial input.
It means, ``After reading any number of lines, read one more line if
possible.''  The left recursion makes this rule into a loop.  Since the
first alternative matches empty input, the loop can be executed zero or
more times.

The parser function @code{yyparse} continues to process input until a
grammatical error is seen or the lexical analyzer says there are no more
input tokens; we will arrange for the latter to happen at end-of-input.

@node Rpcalc Line
@subsubsection Explanation of @code{line}

Now consider the definition of @code{line}:

@example
line:
  '\n'
| exp '\n'  @{ printf ("%.10g\n", $1); @}
;
@end example

The first alternative is a token which is a newline character; this means
that rpcalc accepts a blank line (and ignores it, since there is no
action).  The second alternative is an expression followed by a newline.
This is the alternative that makes rpcalc useful.  The semantic value of
the @code{exp} grouping is the value of @code{$1} because the @code{exp} in
question is the first symbol in the alternative.  The action prints this
value, which is the result of the computation the user asked for.

This action is unusual because it does not assign a value to @code{$$}.  As
a consequence, the semantic value associated with the @code{line} is
uninitialized (its value will be unpredictable).  This would be a bug if
that value were ever used, but we don't use it: once rpcalc has printed the
value of the user's input line, that value is no longer needed.

@node Rpcalc Expr
@subsubsection Explanation of @code{expr}

The @code{exp} grouping has several rules, one for each kind of expression.
The first rule handles the simplest expressions: those that are just numbers.
The second handles an addition-expression, which looks like two expressions
followed by a plus-sign.  The third handles subtraction, and so on.

@example
exp:
  NUM
| exp exp '+'     @{ $$ = $1 + $2;    @}
| exp exp '-'     @{ $$ = $1 - $2;    @}
@dots{}
;
@end example

We have used @samp{|} to join all the rules for @code{exp}, but we could
equally well have written them separately:

@example
exp: NUM ;
exp: exp exp '+'     @{ $$ = $1 + $2; @};
exp: exp exp '-'     @{ $$ = $1 - $2; @};
@dots{}
@end example

Most of the rules have actions that compute the value of the expression in
terms of the value of its parts.  For example, in the rule for addition,
@code{$1} refers to the first component @code{exp} and @code{$2} refers to
the second one.  The third component, @code{'+'}, has no meaningful
associated semantic value, but if it had one you could refer to it as
@code{$3}.  When @code{yyparse} recognizes a sum expression using this
rule, the sum of the two subexpressions' values is produced as the value of
the entire expression.  @xref{Actions}.

You don't have to give an action for every rule.  When a rule has no
action, Bison by default copies the value of @code{$1} into @code{$$}.
This is what happens in the first rule (the one that uses @code{NUM}).

The formatting shown here is the recommended convention, but Bison does
not require it.  You can add or change white space as much as you wish.
For example, this:

@example
exp: NUM | exp exp '+' @{$$ = $1 + $2; @} | @dots{} ;
@end example

@noindent
means the same thing as this:

@example
exp:
  NUM
| exp exp '+'    @{ $$ = $1 + $2; @}
| @dots{}
;
@end example

@noindent
The latter, however, is much more readable.

@node Rpcalc Lexer
@subsection The @code{rpcalc} Lexical Analyzer
@cindex writing a lexical analyzer
@cindex lexical analyzer, writing

The lexical analyzer's job is low-level parsing: converting characters
or sequences of characters into tokens.  The Bison parser gets its
tokens by calling the lexical analyzer.  @xref{Lexical, ,The Lexical
Analyzer Function @code{yylex}}.

Only a simple lexical analyzer is needed for the RPN
calculator.  This
lexical analyzer skips blanks and tabs, then reads in numbers as
@code{double} and returns them as @code{NUM} tokens.  Any other character
that isn't part of a number is a separate token.  Note that the token-code
for such a single-character token is the character itself.

The return value of the lexical analyzer function is a numeric code which
represents a token type.  The same text used in Bison rules to stand for
this token type is also a C expression for the numeric code for the type.
This works in two ways.  If the token type is a character literal, then its
numeric code is that of the character; you can use the same
character literal in the lexical analyzer to express the number.  If the
token type is an identifier, that identifier is defined by Bison as a C
macro whose definition is the appropriate number.  In this example,
therefore, @code{NUM} becomes a macro for @code{yylex} to use.

The semantic value of the token (if it has one) is stored into the
global variable @code{yylval}, which is where the Bison parser will look
for it.  (The C data type of @code{yylval} is @code{YYSTYPE}, whose value
was defined at the beginning of the grammar via @samp{%define api.value.type
@{double@}}; @pxref{Rpcalc Declarations,,Declarations for @code{rpcalc}}.)

A token type code of zero is returned if the end-of-input is encountered.
(Bison recognizes any nonpositive value as indicating end-of-input.)

Here is the code for the lexical analyzer:

@comment file: rpcalc.y
@example
@group
/* The lexical analyzer returns a double floating point
   number on the stack and the token NUM, or the numeric code
   of the character read if not a number.  It skips all blanks
   and tabs, and returns 0 for end-of-input.  */

#include <ctype.h>
@end group

@group
int
yylex (void)
@{
  int c;

  /* Skip white space.  */
  while ((c = getchar ()) == ' ' || c == '\t')
    continue;
@end group
@group
  /* Process numbers.  */
  if (c == '.' || isdigit (c))
    @{
      ungetc (c, stdin);
      scanf ("%lf", &yylval);
      return NUM;
    @}
@end group
@group
  /* Return end-of-input.  */
  if (c == EOF)
    return 0;
  /* Return a single char.  */
  return c;
@}
@end group
@end example

@node Rpcalc Main
@subsection The Controlling Function
@cindex controlling function
@cindex main function in simple example

In keeping with the spirit of this example, the controlling function is
kept to the bare minimum.  The only requirement is that it call
@code{yyparse} to start the process of parsing.

@comment file: rpcalc.y
@example
@group
int
main (void)
@{
  return yyparse ();
@}
@end group
@end example

@node Rpcalc Error
@subsection The Error Reporting Routine
@cindex error reporting routine

When @code{yyparse} detects a syntax error, it calls the error reporting
function @code{yyerror} to print an error message (usually but not
always @code{"syntax error"}).  It is up to the programmer to supply
@code{yyerror} (@pxref{Interface, ,Parser C-Language Interface}), so
here is the definition we will use:

@comment file: rpcalc.y
@example
#include <stdio.h>

@group
/* Called by yyparse on error.  */
void
yyerror (char const *s)
@{
  fprintf (stderr, "%s\n", s);
@}
@end group
@end example

After @code{yyerror} returns, the Bison parser may recover from the error
and continue parsing if the grammar contains a suitable error rule
(@pxref{Error Recovery}).  Otherwise, @code{yyparse} returns nonzero.  We
have not written any error rules in this example, so any invalid input will
cause the calculator program to exit.  This is not clean behavior for a
real calculator, but it is adequate for the first example.

@node Rpcalc Generate
@subsection Running Bison to Make the Parser
@cindex running Bison (introduction)

Before running Bison to produce a parser, we need to decide how to
arrange all the source code in one or more source files.  For such a
simple example, the easiest thing is to put everything in one file,
the grammar file.  The definitions of @code{yylex}, @code{yyerror} and
@code{main} go at the end, in the epilogue of the grammar file
(@pxref{Grammar Layout, ,The Overall Layout of a Bison Grammar}).

For a large project, you would probably have several source files, and use
@code{make} to arrange to recompile them.

With all the source in the grammar file, you use the following command
to convert it into a parser implementation file:

@example
bison @var{file}.y
@end example

@noindent
In this example, the grammar file is called @file{rpcalc.y} (for
``Reverse Polish @sc{calc}ulator'').  Bison produces a parser
implementation file named @file{@var{file}.tab.c}, removing the
@samp{.y} from the grammar file name.  The parser implementation file
contains the source code for @code{yyparse}.  The additional functions
in the grammar file (@code{yylex}, @code{yyerror} and @code{main}) are
copied verbatim to the parser implementation file.

@node Rpcalc Compile
@subsection Compiling the Parser Implementation File
@cindex compiling the parser

Here is how to compile and run the parser implementation file:

@example
@group
# @r{List files in current directory.}
$ @kbd{ls}
rpcalc.tab.c  rpcalc.y
@end group

@group
# @r{Compile the Bison parser.}
# @r{@samp{-lm} tells compiler to search math library for @code{pow}.}
$ @kbd{cc -lm -o rpcalc rpcalc.tab.c}
@end group

@group
# @r{List files again.}
$ @kbd{ls}
rpcalc  rpcalc.tab.c  rpcalc.y
@end group
@end example

The file @file{rpcalc} now contains the executable code.  Here is an
example session using @code{rpcalc}.

@example
$ @kbd{rpcalc}
@kbd{4 9 +}
@result{} 13
@kbd{3 7 + 3 4 5 *+-}
@result{} -13
@kbd{3 7 + 3 4 5 * + - n}              @r{Note the unary minus, @samp{n}}
@result{} 13
@kbd{5 6 / 4 n +}
@result{} -3.166666667
@kbd{3 4 ^}                            @r{Exponentiation}
@result{} 81
@kbd{^D}                               @r{End-of-file indicator}
$
@end example

@node Infix Calc
@section Infix Notation Calculator: @code{calc}
@cindex infix notation calculator
@cindex @code{calc}
@cindex calculator, infix notation

We now modify rpcalc to handle infix operators instead of postfix.  Infix
notation involves the concept of operator precedence and the need for
parentheses nested to arbitrary depth.  Here is the Bison code for
@file{calc.y}, an infix desk-top calculator.

@example
/* Infix notation calculator.  */

@group
%@{
  #include <math.h>
  #include <stdio.h>
  int yylex (void);
  void yyerror (char const *);
%@}
@end group

@group
/* Bison declarations.  */
%define api.value.type @{double@}
%token NUM
%left '-' '+'
%left '*' '/'
%precedence NEG   /* negation--unary minus */
%right '^'        /* exponentiation */
@end group

%% /* The grammar follows.  */
@group
input:
  %empty
| input line
;
@end group

@group
line:
  '\n'
| exp '\n'  @{ printf ("\t%.10g\n", $1); @}
;
@end group

@group
exp:
  NUM                @{ $$ = $1;           @}
| exp '+' exp        @{ $$ = $1 + $3;      @}
| exp '-' exp        @{ $$ = $1 - $3;      @}
| exp '*' exp        @{ $$ = $1 * $3;      @}
| exp '/' exp        @{ $$ = $1 / $3;      @}
| '-' exp  %prec NEG @{ $$ = -$2;          @}
| exp '^' exp        @{ $$ = pow ($1, $3); @}
| '(' exp ')'        @{ $$ = $2;           @}
;
@end group
%%
@end example

@noindent
The functions @code{yylex}, @code{yyerror} and @code{main} can be the
same as before.

There are two important new features shown in this code.

In the second section (Bison declarations), @code{%left} declares token
types and says they are left-associative operators.  The declarations
@code{%left} and @code{%right} (right associativity) take the place of
@code{%token} which is used to declare a token type name without
associativity/precedence.  (These tokens are single-character literals, which
ordinarily don't need to be declared.  We declare them here to specify
the associativity/precedence.)

Operator precedence is determined by the line ordering of the
declarations; the higher the line number of the declaration (lower on
the page or screen), the higher the precedence.  Hence, exponentiation
has the highest precedence, unary minus (@code{NEG}) is next, followed
by @samp{*} and @samp{/}, and so on.  Unary minus is not associative,
only precedence matters (@code{%precedence}. @xref{Precedence, ,Operator
Precedence}.

The other important new feature is the @code{%prec} in the grammar
section for the unary minus operator.  The @code{%prec} simply instructs
Bison that the rule @samp{| '-' exp} has the same precedence as
@code{NEG}---in this case the next-to-highest.  @xref{Contextual
Precedence, ,Context-Dependent Precedence}.

Here is a sample run of @file{calc.y}:

@need 500
@example
$ @kbd{calc}
@kbd{4 + 4.5 - (34/(8*3+-3))}
6.880952381
@kbd{-56 + 2}
-54
@kbd{3 ^ 2}
9
@end example

@node Simple Error Recovery
@section Simple Error Recovery
@cindex error recovery, simple

Up to this point, this manual has not addressed the issue of @dfn{error
recovery}---how to continue parsing after the parser detects a syntax
error.  All we have handled is error reporting with @code{yyerror}.
Recall that by default @code{yyparse} returns after calling
@code{yyerror}.  This means that an erroneous input line causes the
calculator program to exit.  Now we show how to rectify this deficiency.

The Bison language itself includes the reserved word @code{error}, which
may be included in the grammar rules.  In the example below it has
been added to one of the alternatives for @code{line}:

@example
@group
line:
  '\n'
| exp '\n'   @{ printf ("\t%.10g\n", $1); @}
| error '\n' @{ yyerrok;                  @}
;
@end group
@end example

This addition to the grammar allows for simple error recovery in the
event of a syntax error.  If an expression that cannot be evaluated is
read, the error will be recognized by the third rule for @code{line},
and parsing will continue.  (The @code{yyerror} function is still called
upon to print its message as well.)  The action executes the statement
@code{yyerrok}, a macro defined automatically by Bison; its meaning is
that error recovery is complete (@pxref{Error Recovery}).  Note the
difference between @code{yyerrok} and @code{yyerror}; neither one is a
misprint.

This form of error recovery deals with syntax errors.  There are other
kinds of errors; for example, division by zero, which raises an exception
signal that is normally fatal.  A real calculator program must handle this
signal and use @code{longjmp} to return to @code{main} and resume parsing
input lines; it would also have to discard the rest of the current line of
input.  We won't discuss this issue further because it is not specific to
Bison programs.

@node Location Tracking Calc
@section Location Tracking Calculator: @code{ltcalc}
@cindex location tracking calculator
@cindex @code{ltcalc}
@cindex calculator, location tracking

This example extends the infix notation calculator with location
tracking.  This feature will be used to improve the error messages.  For
the sake of clarity, this example is a simple integer calculator, since
most of the work needed to use locations will be done in the lexical
analyzer.

@menu
* Ltcalc Declarations::    Bison and C declarations for ltcalc.
* Ltcalc Rules::           Grammar rules for ltcalc, with explanations.
* Ltcalc Lexer::           The lexical analyzer.
@end menu

@node Ltcalc Declarations
@subsection Declarations for @code{ltcalc}

The C and Bison declarations for the location tracking calculator are
the same as the declarations for the infix notation calculator.

@example
/* Location tracking calculator.  */

%@{
  #include <math.h>
  int yylex (void);
  void yyerror (char const *);
%@}

/* Bison declarations.  */
%define api.value.type int
%token NUM

%left '-' '+'
%left '*' '/'
%precedence NEG
%right '^'

%% /* The grammar follows.  */
@end example

@noindent
Note there are no declarations specific to locations.  Defining a data
type for storing locations is not needed: we will use the type provided
by default (@pxref{Location Type, ,Data Types of Locations}), which is a
four member structure with the following integer fields:
@code{first_line}, @code{first_column}, @code{last_line} and
@code{last_column}.  By conventions, and in accordance with the GNU
Coding Standards and common practice, the line and column count both
start at 1.

@node Ltcalc Rules
@subsection Grammar Rules for @code{ltcalc}

Whether handling locations or not has no effect on the syntax of your
language.  Therefore, grammar rules for this example will be very close
to those of the previous example: we will only modify them to benefit
from the new information.

Here, we will use locations to report divisions by zero, and locate the
wrong expressions or subexpressions.

@example
@group
input:
  %empty
| input line
;
@end group

@group
line:
  '\n'
| exp '\n' @{ printf ("%d\n", $1); @}
;
@end group

@group
exp:
  NUM           @{ $$ = $1; @}
| exp '+' exp   @{ $$ = $1 + $3; @}
| exp '-' exp   @{ $$ = $1 - $3; @}
| exp '*' exp   @{ $$ = $1 * $3; @}
@end group
@group
| exp '/' exp
    @{
      if ($3)
        $$ = $1 / $3;
      else
        @{
          $$ = 1;
          fprintf (stderr, "%d.%d-%d.%d: division by zero",
                   @@3.first_line, @@3.first_column,
                   @@3.last_line, @@3.last_column);
        @}
    @}
@end group
@group
| '-' exp %prec NEG     @{ $$ = -$2; @}
| exp '^' exp           @{ $$ = pow ($1, $3); @}
| '(' exp ')'           @{ $$ = $2; @}
@end group
@end example

This code shows how to reach locations inside of semantic actions, by
using the pseudo-variables @code{@@@var{n}} for rule components, and the
pseudo-variable @code{@@$} for groupings.

We don't need to assign a value to @code{@@$}: the output parser does it
automatically.  By default, before executing the C code of each action,
@code{@@$} is set to range from the beginning of @code{@@1} to the end
of @code{@@@var{n}}, for a rule with @var{n} components.  This behavior
can be redefined (@pxref{Location Default Action, , Default Action for
Locations}), and for very specific rules, @code{@@$} can be computed by
hand.

@node Ltcalc Lexer
@subsection The @code{ltcalc} Lexical Analyzer.

Until now, we relied on Bison's defaults to enable location
tracking.  The next step is to rewrite the lexical analyzer, and make it
able to feed the parser with the token locations, as it already does for
semantic values.

To this end, we must take into account every single character of the
input text, to avoid the computed locations of being fuzzy or wrong:

@example
@group
int
yylex (void)
@{
  int c;
@end group

@group
  /* Skip white space.  */
  while ((c = getchar ()) == ' ' || c == '\t')
    ++yylloc.last_column;
@end group

@group
  /* Step.  */
  yylloc.first_line = yylloc.last_line;
  yylloc.first_column = yylloc.last_column;
@end group

@group
  /* Process numbers.  */
  if (isdigit (c))
    @{
      yylval = c - '0';
      ++yylloc.last_column;
      while (isdigit (c = getchar ()))
        @{
          ++yylloc.last_column;
          yylval = yylval * 10 + c - '0';
        @}
      ungetc (c, stdin);
      return NUM;
    @}
@end group

  /* Return end-of-input.  */
  if (c == EOF)
    return 0;

@group
  /* Return a single char, and update location.  */
  if (c == '\n')
    @{
      ++yylloc.last_line;
      yylloc.last_column = 0;
    @}
  else
    ++yylloc.last_column;
  return c;
@}
@end group
@end example

Basically, the lexical analyzer performs the same processing as before:
it skips blanks and tabs, and reads numbers or single-character tokens.
In addition, it updates @code{yylloc}, the global variable (of type
@code{YYLTYPE}) containing the token's location.

Now, each time this function returns a token, the parser has its number
as well as its semantic value, and its location in the text.  The last
needed change is to initialize @code{yylloc}, for example in the
controlling function:

@example
@group
int
main (void)
@{
  yylloc.first_line = yylloc.last_line = 1;
  yylloc.first_column = yylloc.last_column = 0;
  return yyparse ();
@}
@end group
@end example

Remember that computing locations is not a matter of syntax.  Every
character must be associated to a location update, whether it is in
valid input, in comments, in literal strings, and so on.

@node Multi-function Calc
@section Multi-Function Calculator: @code{mfcalc}
@cindex multi-function calculator
@cindex @code{mfcalc}
@cindex calculator, multi-function

Now that the basics of Bison have been discussed, it is time to move on to
a more advanced problem.  The above calculators provided only five
functions, @samp{+}, @samp{-}, @samp{*}, @samp{/} and @samp{^}.  It would
be nice to have a calculator that provides other mathematical functions such
as @code{sin}, @code{cos}, etc.

It is easy to add new operators to the infix calculator as long as they are
only single-character literals.  The lexical analyzer @code{yylex} passes
back all nonnumeric characters as tokens, so new grammar rules suffice for
adding a new operator.  But we want something more flexible: built-in
functions whose syntax has this form:

@example
@var{function_name} (@var{argument})
@end example

@noindent
At the same time, we will add memory to the calculator, by allowing you
to create named variables, store values in them, and use them later.
Here is a sample session with the multi-function calculator:

@example
@group
$ @kbd{mfcalc}
@kbd{pi = 3.141592653589}
@result{} 3.1415926536
@end group
@group
@kbd{sin(pi)}
@result{} 0.0000000000
@end group
@kbd{alpha = beta1 = 2.3}
@result{} 2.3000000000
@kbd{alpha}
@result{} 2.3000000000
@kbd{ln(alpha)}
@result{} 0.8329091229
@kbd{exp(ln(beta1))}
@result{} 2.3000000000
$
@end example

Note that multiple assignment and nested function calls are permitted.

@menu
* Mfcalc Declarations::    Bison declarations for multi-function calculator.
* Mfcalc Rules::           Grammar rules for the calculator.
* Mfcalc Symbol Table::    Symbol table management subroutines.
* Mfcalc Lexer::           The lexical analyzer.
* Mfcalc Main::            The controlling function.
@end menu

@node Mfcalc Declarations
@subsection Declarations for @code{mfcalc}

Here are the C and Bison declarations for the multi-function calculator.

@comment file: mfcalc.y: 1
@example
@group
%@{
  #include <stdio.h>  /* For printf, etc. */
  #include <math.h>   /* For pow, used in the grammar.  */
  #include "calc.h"   /* Contains definition of 'symrec'.  */
  int yylex (void);
  void yyerror (char const *);
%@}
@end group

%define api.value.type union /* Generate YYSTYPE from these types:  */
%token <double>  NUM         /* Simple double precision number.  */
%token <symrec*> VAR FNCT    /* Symbol table pointer: variable and function.  */
%type  <double>  exp

@group
%precedence '='
%left '-' '+'
%left '*' '/'
%precedence NEG /* negation--unary minus */
%right '^'      /* exponentiation */
@end group
@end example

The above grammar introduces only two new features of the Bison language.
These features allow semantic values to have various data types
(@pxref{Multiple Types, ,More Than One Value Type}).

The special @code{union} value assigned to the @code{%define} variable
@code{api.value.type} specifies that the symbols are defined with their data
types.  Bison will generate an appropriate definition of @code{YYSTYPE} to
store these values.

Since values can now have various types, it is necessary to associate a type
with each grammar symbol whose semantic value is used.  These symbols are
@code{NUM}, @code{VAR}, @code{FNCT}, and @code{exp}.  Their declarations are
augmented with their data type (placed between angle brackets).  For
instance, values of @code{NUM} are stored in @code{double}.

The Bison construct @code{%type} is used for declaring nonterminal symbols,
just as @code{%token} is used for declaring token types.  Previously we did
not use @code{%type} before because nonterminal symbols are normally
declared implicitly by the rules that define them.  But @code{exp} must be
declared explicitly so we can specify its value type.  @xref{Type Decl,
,Nonterminal Symbols}.

@node Mfcalc Rules
@subsection Grammar Rules for @code{mfcalc}

Here are the grammar rules for the multi-function calculator.
Most of them are copied directly from @code{calc}; three rules,
those which mention @code{VAR} or @code{FNCT}, are new.

@comment file: mfcalc.y: 3
@example
%% /* The grammar follows.  */
@group
input:
  %empty
| input line
;
@end group

@group
line:
  '\n'
| exp '\n'   @{ printf ("%.10g\n", $1); @}
| error '\n' @{ yyerrok;                @}
;
@end group

@group
exp:
  NUM                @{ $$ = $1;                         @}
| VAR                @{ $$ = $1->value.var;              @}
| VAR '=' exp        @{ $$ = $3; $1->value.var = $3;     @}
| FNCT '(' exp ')'   @{ $$ = (*($1->value.fnctptr))($3); @}
| exp '+' exp        @{ $$ = $1 + $3;                    @}
| exp '-' exp        @{ $$ = $1 - $3;                    @}
| exp '*' exp        @{ $$ = $1 * $3;                    @}
| exp '/' exp        @{ $$ = $1 / $3;                    @}
| '-' exp  %prec NEG @{ $$ = -$2;                        @}
| exp '^' exp        @{ $$ = pow ($1, $3);               @}
| '(' exp ')'        @{ $$ = $2;                         @}
;
@end group
/* End of grammar.  */
%%
@end example

@node Mfcalc Symbol Table
@subsection The @code{mfcalc} Symbol Table
@cindex symbol table example

The multi-function calculator requires a symbol table to keep track of the
names and meanings of variables and functions.  This doesn't affect the
grammar rules (except for the actions) or the Bison declarations, but it
requires some additional C functions for support.

The symbol table itself consists of a linked list of records.  Its
definition, which is kept in the header @file{calc.h}, is as follows.  It
provides for either functions or variables to be placed in the table.

@comment file: calc.h
@example
@group
/* Function type.  */
typedef double (*func_t) (double);
@end group

@group
/* Data type for links in the chain of symbols.  */
struct symrec
@{
  char *name;  /* name of symbol */
  int type;    /* type of symbol: either VAR or FNCT */
  union
  @{
    double var;      /* value of a VAR */
    func_t fnctptr;  /* value of a FNCT */
  @} value;
  struct symrec *next;  /* link field */
@};
@end group

@group
typedef struct symrec symrec;

/* The symbol table: a chain of 'struct symrec'.  */
extern symrec *sym_table;

symrec *putsym (char const *, int);
symrec *getsym (char const *);
@end group
@end example

The new version of @code{main} will call @code{init_table} to initialize
the symbol table:

@comment file: mfcalc.y: 3
@example
@group
struct init
@{
  char const *fname;
  double (*fnct) (double);
@};
@end group

@group
struct init const arith_fncts[] =
@{
  @{ "atan", atan @},
  @{ "cos",  cos  @},
  @{ "exp",  exp  @},
  @{ "ln",   log  @},
  @{ "sin",  sin  @},
  @{ "sqrt", sqrt @},
  @{ 0, 0 @},
@};
@end group

@group
/* The symbol table: a chain of 'struct symrec'.  */
symrec *sym_table;
@end group

@group
/* Put arithmetic functions in table.  */
static
void
init_table (void)
@{
  int i;
  for (i = 0; arith_fncts[i].fname != 0; i++)
    @{
      symrec *ptr = putsym (arith_fncts[i].fname, FNCT);
      ptr->value.fnctptr = arith_fncts[i].fnct;
    @}
@}
@end group
@end example

By simply editing the initialization list and adding the necessary include
files, you can add additional functions to the calculator.

Two important functions allow look-up and installation of symbols in the
symbol table.  The function @code{putsym} is passed a name and the type
(@code{VAR} or @code{FNCT}) of the object to be installed.  The object is
linked to the front of the list, and a pointer to the object is returned.
The function @code{getsym} is passed the name of the symbol to look up.  If
found, a pointer to that symbol is returned; otherwise zero is returned.

@comment file: mfcalc.y: 3
@example
#include <stdlib.h> /* malloc. */
#include <string.h> /* strlen. */

@group
symrec *
putsym (char const *sym_name, int sym_type)
@{
  symrec *ptr = (symrec *) malloc (sizeof (symrec));
  ptr->name = (char *) malloc (strlen (sym_name) + 1);
  strcpy (ptr->name,sym_name);
  ptr->type = sym_type;
  ptr->value.var = 0; /* Set value to 0 even if fctn.  */
  ptr->next = (struct symrec *)sym_table;
  sym_table = ptr;
  return ptr;
@}
@end group

@group
symrec *
getsym (char const *sym_name)
@{
  symrec *ptr;
  for (ptr = sym_table; ptr != (symrec *) 0;
       ptr = (symrec *)ptr->next)
    if (strcmp (ptr->name, sym_name) == 0)
      return ptr;
  return 0;
@}
@end group
@end example

@node Mfcalc Lexer
@subsection The @code{mfcalc} Lexer

The function @code{yylex} must now recognize variables, numeric values, and
the single-character arithmetic operators.  Strings of alphanumeric
characters with a leading letter are recognized as either variables or
functions depending on what the symbol table says about them.

The string is passed to @code{getsym} for look up in the symbol table.  If
the name appears in the table, a pointer to its location and its type
(@code{VAR} or @code{FNCT}) is returned to @code{yyparse}.  If it is not
already in the table, then it is installed as a @code{VAR} using
@code{putsym}.  Again, a pointer and its type (which must be @code{VAR}) is
returned to @code{yyparse}.

No change is needed in the handling of numeric values and arithmetic
operators in @code{yylex}.

@comment file: mfcalc.y: 3
@example
#include <ctype.h>

@group
int
yylex (void)
@{
  int c;

  /* Ignore white space, get first nonwhite character.  */
  while ((c = getchar ()) == ' ' || c == '\t')
    continue;

  if (c == EOF)
    return 0;
@end group

@group
  /* Char starts a number => parse the number.         */
  if (c == '.' || isdigit (c))
    @{
      ungetc (c, stdin);
      scanf ("%lf", &yylval.NUM);
      return NUM;
    @}
@end group
@end example

@noindent
Bison generated a definition of @code{YYSTYPE} with a member named
@code{NUM} to store value of @code{NUM} symbols.

@comment file: mfcalc.y: 3
@example
@group
  /* Char starts an identifier => read the name.       */
  if (isalpha (c))
    @{
      /* Initially make the buffer long enough
         for a 40-character symbol name.  */
      static size_t length = 40;
      static char *symbuf = 0;
      symrec *s;
      int i;
@end group
      if (!symbuf)
        symbuf = (char *) malloc (length + 1);

      i = 0;
      do
@group
        @{
          /* If buffer is full, make it bigger.        */
          if (i == length)
            @{
              length *= 2;
              symbuf = (char *) realloc (symbuf, length + 1);
            @}
          /* Add this character to the buffer.         */
          symbuf[i++] = c;
          /* Get another character.                    */
          c = getchar ();
        @}
@end group
@group
      while (isalnum (c));

      ungetc (c, stdin);
      symbuf[i] = '\0';
@end group

@group
      s = getsym (symbuf);
      if (s == 0)
        s = putsym (symbuf, VAR);
      *((symrec**) &yylval) = s;
      return s->type;
    @}

  /* Any other character is a token by itself.        */
  return c;
@}
@end group
@end example

@node Mfcalc Main
@subsection The @code{mfcalc} Main

The error reporting function is unchanged, and the new version of
@code{main} includes a call to @code{init_table} and sets the @code{yydebug}
on user demand (@xref{Tracing, , Tracing Your Parser}, for details):

@comment file: mfcalc.y: 3
@example
@group
/* Called by yyparse on error.  */
void
yyerror (char const *s)
@{
  fprintf (stderr, "%s\n", s);
@}
@end group

@group
int
main (int argc, char const* argv[])
@{
  int i;
  /* Enable parse traces on option -p.  */
  for (i = 1; i < argc; ++i)
    if (!strcmp(argv[i], "-p"))
      yydebug = 1;
  init_table ();
  return yyparse ();
@}
@end group
@end example

This program is both powerful and flexible.  You may easily add new
functions, and it is a simple job to modify this code to install
predefined variables such as @code{pi} or @code{e} as well.

@node Exercises
@section Exercises
@cindex exercises

@enumerate
@item
Add some new functions from @file{math.h} to the initialization list.

@item
Add another array that contains constants and their values.  Then
modify @code{init_table} to add these constants to the symbol table.
It will be easiest to give the constants type @code{VAR}.

@item
Make the program report an error if the user refers to an
uninitialized variable in any way except to store a value in it.
@end enumerate

@node Grammar File
@chapter Bison Grammar Files

Bison takes as input a context-free grammar specification and produces a
C-language function that recognizes correct instances of the grammar.

The Bison grammar file conventionally has a name ending in @samp{.y}.
@xref{Invocation, ,Invoking Bison}.

@menu
* Grammar Outline::    Overall layout of the grammar file.
* Symbols::            Terminal and nonterminal symbols.
* Rules::              How to write grammar rules.
* Semantics::          Semantic values and actions.
* Tracking Locations:: Locations and actions.
* Named References::   Using named references in actions.
* Declarations::       All kinds of Bison declarations are described here.
* Multiple Parsers::   Putting more than one Bison parser in one program.
@end menu

@node Grammar Outline
@section Outline of a Bison Grammar
@cindex comment
@findex // @dots{}
@findex /* @dots{} */

A Bison grammar file has four main sections, shown here with the
appropriate delimiters:

@example
%@{
  @var{Prologue}
%@}

@var{Bison declarations}

%%
@var{Grammar rules}
%%

@var{Epilogue}
@end example

Comments enclosed in @samp{/* @dots{} */} may appear in any of the sections.
As a GNU extension, @samp{//} introduces a comment that continues until end
of line.

@menu
* Prologue::              Syntax and usage of the prologue.
* Prologue Alternatives:: Syntax and usage of alternatives to the prologue.
* Bison Declarations::    Syntax and usage of the Bison declarations section.
* Grammar Rules::         Syntax and usage of the grammar rules section.
* Epilogue::              Syntax and usage of the epilogue.
@end menu

@node Prologue
@subsection The prologue
@cindex declarations section
@cindex Prologue
@cindex declarations

The @var{Prologue} section contains macro definitions and declarations
of functions and variables that are used in the actions in the grammar
rules.  These are copied to the beginning of the parser implementation
file so that they precede the definition of @code{yyparse}.  You can
use @samp{#include} to get the declarations from a header file.  If
you don't need any C declarations, you may omit the @samp{%@{} and
@samp{%@}} delimiters that bracket this section.

The @var{Prologue} section is terminated by the first occurrence
of @samp{%@}} that is outside a comment, a string literal, or a
character constant.

You may have more than one @var{Prologue} section, intermixed with the
@var{Bison declarations}.  This allows you to have C and Bison
declarations that refer to each other.  For example, the @code{%union}
declaration may use types defined in a header file, and you may wish to
prototype functions that take arguments of type @code{YYSTYPE}.  This
can be done with two @var{Prologue} blocks, one before and one after the
@code{%union} declaration.

@example
@group
%@{
  #define _GNU_SOURCE
  #include <stdio.h>
  #include "ptypes.h"
%@}
@end group

@group
%union @{
  long int n;
  tree t;  /* @r{@code{tree} is defined in @file{ptypes.h}.} */
@}
@end group

@group
%@{
  static void print_token_value (FILE *, int, YYSTYPE);
  #define YYPRINT(F, N, L) print_token_value (F, N, L)
%@}
@end group

@dots{}
@end example

When in doubt, it is usually safer to put prologue code before all
Bison declarations, rather than after.  For example, any definitions
of feature test macros like @code{_GNU_SOURCE} or
@code{_POSIX_C_SOURCE} should appear before all Bison declarations, as
feature test macros can affect the behavior of Bison-generated
@code{#include} directives.

@node Prologue Alternatives
@subsection Prologue Alternatives
@cindex Prologue Alternatives

@findex %code
@findex %code requires
@findex %code provides
@findex %code top

The functionality of @var{Prologue} sections can often be subtle and
inflexible.  As an alternative, Bison provides a @code{%code}
directive with an explicit qualifier field, which identifies the
purpose of the code and thus the location(s) where Bison should
generate it.  For C/C++, the qualifier can be omitted for the default
location, or it can be one of @code{requires}, @code{provides},
@code{top}.  @xref{%code Summary}.

Look again at the example of the previous section:

@example
@group
%@{
  #define _GNU_SOURCE
  #include <stdio.h>
  #include "ptypes.h"
%@}
@end group

@group
%union @{
  long int n;
  tree t;  /* @r{@code{tree} is defined in @file{ptypes.h}.} */
@}
@end group

@group
%@{
  static void print_token_value (FILE *, int, YYSTYPE);
  #define YYPRINT(F, N, L) print_token_value (F, N, L)
%@}
@end group

@dots{}
@end example

@noindent
Notice that there are two @var{Prologue} sections here, but there's a
subtle distinction between their functionality.  For example, if you
decide to override Bison's default definition for @code{YYLTYPE}, in
which @var{Prologue} section should you write your new definition?
You should write it in the first since Bison will insert that code
into the parser implementation file @emph{before} the default
@code{YYLTYPE} definition.  In which @var{Prologue} section should you
prototype an internal function, @code{trace_token}, that accepts
@code{YYLTYPE} and @code{yytokentype} as arguments?  You should
prototype it in the second since Bison will insert that code
@emph{after} the @code{YYLTYPE} and @code{yytokentype} definitions.

This distinction in functionality between the two @var{Prologue} sections is
established by the appearance of the @code{%union} between them.
This behavior raises a few questions.
First, why should the position of a @code{%union} affect definitions related to
@code{YYLTYPE} and @code{yytokentype}?
Second, what if there is no @code{%union}?
In that case, the second kind of @var{Prologue} section is not available.
This behavior is not intuitive.

To avoid this subtle @code{%union} dependency, rewrite the example using a
@code{%code top} and an unqualified @code{%code}.
Let's go ahead and add the new @code{YYLTYPE} definition and the
@code{trace_token} prototype at the same time:

@example
%code top @{
  #define _GNU_SOURCE
  #include <stdio.h>

  /* WARNING: The following code really belongs
   * in a '%code requires'; see below.  */

  #include "ptypes.h"
  #define YYLTYPE YYLTYPE
  typedef struct YYLTYPE
  @{
    int first_line;
    int first_column;
    int last_line;
    int last_column;
    char *filename;
  @} YYLTYPE;
@}

@group
%union @{
  long int n;
  tree t;  /* @r{@code{tree} is defined in @file{ptypes.h}.} */
@}
@end group

@group
%code @{
  static void print_token_value (FILE *, int, YYSTYPE);
  #define YYPRINT(F, N, L) print_token_value (F, N, L)
  static void trace_token (enum yytokentype token, YYLTYPE loc);
@}
@end group

@dots{}
@end example

@noindent
In this way, @code{%code top} and the unqualified @code{%code} achieve the same
functionality as the two kinds of @var{Prologue} sections, but it's always
explicit which kind you intend.
Moreover, both kinds are always available even in the absence of @code{%union}.

The @code{%code top} block above logically contains two parts.  The
first two lines before the warning need to appear near the top of the
parser implementation file.  The first line after the warning is
required by @code{YYSTYPE} and thus also needs to appear in the parser
implementation file.  However, if you've instructed Bison to generate
a parser header file (@pxref{Decl Summary, ,%defines}), you probably
want that line to appear before the @code{YYSTYPE} definition in that
header file as well.  The @code{YYLTYPE} definition should also appear
in the parser header file to override the default @code{YYLTYPE}
definition there.

In other words, in the @code{%code top} block above, all but the first two
lines are dependency code required by the @code{YYSTYPE} and @code{YYLTYPE}
definitions.
Thus, they belong in one or more @code{%code requires}:

@example
@group
%code top @{
  #define _GNU_SOURCE
  #include <stdio.h>
@}
@end group

@group
%code requires @{
  #include "ptypes.h"
@}
@end group
@group
%union @{
  long int n;
  tree t;  /* @r{@code{tree} is defined in @file{ptypes.h}.} */
@}
@end group

@group
%code requires @{
  #define YYLTYPE YYLTYPE
  typedef struct YYLTYPE
  @{
    int first_line;
    int first_column;
    int last_line;
    int last_column;
    char *filename;
  @} YYLTYPE;
@}
@end group

@group
%code @{
  static void print_token_value (FILE *, int, YYSTYPE);
  #define YYPRINT(F, N, L) print_token_value (F, N, L)
  static void trace_token (enum yytokentype token, YYLTYPE loc);
@}
@end group

@dots{}
@end example

@noindent
Now Bison will insert @code{#include "ptypes.h"} and the new
@code{YYLTYPE} definition before the Bison-generated @code{YYSTYPE}
and @code{YYLTYPE} definitions in both the parser implementation file
and the parser header file.  (By the same reasoning, @code{%code
requires} would also be the appropriate place to write your own
definition for @code{YYSTYPE}.)

When you are writing dependency code for @code{YYSTYPE} and
@code{YYLTYPE}, you should prefer @code{%code requires} over
@code{%code top} regardless of whether you instruct Bison to generate
a parser header file.  When you are writing code that you need Bison
to insert only into the parser implementation file and that has no
special need to appear at the top of that file, you should prefer the
unqualified @code{%code} over @code{%code top}.  These practices will
make the purpose of each block of your code explicit to Bison and to
other developers reading your grammar file.  Following these
practices, we expect the unqualified @code{%code} and @code{%code
requires} to be the most important of the four @var{Prologue}
alternatives.

At some point while developing your parser, you might decide to
provide @code{trace_token} to modules that are external to your
parser.  Thus, you might wish for Bison to insert the prototype into
both the parser header file and the parser implementation file.  Since
this function is not a dependency required by @code{YYSTYPE} or
@code{YYLTYPE}, it doesn't make sense to move its prototype to a
@code{%code requires}.  More importantly, since it depends upon
@code{YYLTYPE} and @code{yytokentype}, @code{%code requires} is not
sufficient.  Instead, move its prototype from the unqualified
@code{%code} to a @code{%code provides}:

@example
@group
%code top @{
  #define _GNU_SOURCE
  #include <stdio.h>
@}
@end group

@group
%code requires @{
  #include "ptypes.h"
@}
@end group
@group
%union @{
  long int n;
  tree t;  /* @r{@code{tree} is defined in @file{ptypes.h}.} */
@}
@end group

@group
%code requires @{
  #define YYLTYPE YYLTYPE
  typedef struct YYLTYPE
  @{
    int first_line;
    int first_column;
    int last_line;
    int last_column;
    char *filename;
  @} YYLTYPE;
@}
@end group

@group
%code provides @{
  void trace_token (enum yytokentype token, YYLTYPE loc);
@}
@end group

@group
%code @{
  static void print_token_value (FILE *, int, YYSTYPE);
  #define YYPRINT(F, N, L) print_token_value (F, N, L)
@}
@end group

@dots{}
@end example

@noindent
Bison will insert the @code{trace_token} prototype into both the
parser header file and the parser implementation file after the
definitions for @code{yytokentype}, @code{YYLTYPE}, and
@code{YYSTYPE}.

The above examples are careful to write directives in an order that
reflects the layout of the generated parser implementation and header
files: @code{%code top}, @code{%code requires}, @code{%code provides},
and then @code{%code}.  While your grammar files may generally be
easier to read if you also follow this order, Bison does not require
it.  Instead, Bison lets you choose an organization that makes sense
to you.

You may declare any of these directives multiple times in the grammar file.
In that case, Bison concatenates the contained code in declaration order.
This is the only way in which the position of one of these directives within
the grammar file affects its functionality.

The result of the previous two properties is greater flexibility in how you may
organize your grammar file.
For example, you may organize semantic-type-related directives by semantic
type:

@example
@group
%code requires @{ #include "type1.h" @}
%union @{ type1 field1; @}
%destructor @{ type1_free ($$); @} <field1>
%printer @{ type1_print (yyoutput, $$); @} <field1>
@end group

@group
%code requires @{ #include "type2.h" @}
%union @{ type2 field2; @}
%destructor @{ type2_free ($$); @} <field2>
%printer @{ type2_print (yyoutput, $$); @} <field2>
@end group
@end example

@noindent
You could even place each of the above directive groups in the rules section of
the grammar file next to the set of rules that uses the associated semantic
type.
(In the rules section, you must terminate each of those directives with a
semicolon.)
And you don't have to worry that some directive (like a @code{%union}) in the
definitions section is going to adversely affect their functionality in some
counter-intuitive manner just because it comes first.
Such an organization is not possible using @var{Prologue} sections.

This section has been concerned with explaining the advantages of the four
@var{Prologue} alternatives over the original Yacc @var{Prologue}.
However, in most cases when using these directives, you shouldn't need to
think about all the low-level ordering issues discussed here.
Instead, you should simply use these directives to label each block of your
code according to its purpose and let Bison handle the ordering.
@code{%code} is the most generic label.
Move code to @code{%code requires}, @code{%code provides}, or @code{%code top}
as needed.

@node Bison Declarations
@subsection The Bison Declarations Section
@cindex Bison declarations (introduction)
@cindex declarations, Bison (introduction)

The @var{Bison declarations} section contains declarations that define
terminal and nonterminal symbols, specify precedence, and so on.
In some simple grammars you may not need any declarations.
@xref{Declarations, ,Bison Declarations}.

@node Grammar Rules
@subsection The Grammar Rules Section
@cindex grammar rules section
@cindex rules section for grammar

The @dfn{grammar rules} section contains one or more Bison grammar
rules, and nothing else.  @xref{Rules, ,Syntax of Grammar Rules}.

There must always be at least one grammar rule, and the first
@samp{%%} (which precedes the grammar rules) may never be omitted even
if it is the first thing in the file.

@node Epilogue
@subsection The epilogue
@cindex additional C code section
@cindex epilogue
@cindex C code, section for additional

The @var{Epilogue} is copied verbatim to the end of the parser
implementation file, just as the @var{Prologue} is copied to the
beginning.  This is the most convenient place to put anything that you
want to have in the parser implementation file but which need not come
before the definition of @code{yyparse}.  For example, the definitions
of @code{yylex} and @code{yyerror} often go here.  Because C requires
functions to be declared before being used, you often need to declare
functions like @code{yylex} and @code{yyerror} in the Prologue, even
if you define them in the Epilogue.  @xref{Interface, ,Parser
C-Language Interface}.

If the last section is empty, you may omit the @samp{%%} that separates it
from the grammar rules.

The Bison parser itself contains many macros and identifiers whose names
start with @samp{yy} or @samp{YY}, so it is a good idea to avoid using
any such names (except those documented in this manual) in the epilogue
of the grammar file.

@node Symbols
@section Symbols, Terminal and Nonterminal
@cindex nonterminal symbol
@cindex terminal symbol
@cindex token type
@cindex symbol

@dfn{Symbols} in Bison grammars represent the grammatical classifications
of the language.

A @dfn{terminal symbol} (also known as a @dfn{token type}) represents a
class of syntactically equivalent tokens.  You use the symbol in grammar
rules to mean that a token in that class is allowed.  The symbol is
represented in the Bison parser by a numeric code, and the @code{yylex}
function returns a token type code to indicate what kind of token has
been read.  You don't need to know what the code value is; you can use
the symbol to stand for it.

A @dfn{nonterminal symbol} stands for a class of syntactically
equivalent groupings.  The symbol name is used in writing grammar rules.
By convention, it should be all lower case.

Symbol names can contain letters, underscores, periods, and non-initial
digits and dashes.  Dashes in symbol names are a GNU extension, incompatible
with POSIX Yacc.  Periods and dashes make symbol names less convenient to
use with named references, which require brackets around such names
(@pxref{Named References}).  Terminal symbols that contain periods or dashes
make little sense: since they are not valid symbols (in most programming
languages) they are not exported as token names.

There are three ways of writing terminal symbols in the grammar:

@itemize @bullet
@item
A @dfn{named token type} is written with an identifier, like an
identifier in C@.  By convention, it should be all upper case.  Each
such name must be defined with a Bison declaration such as
@code{%token}.  @xref{Token Decl, ,Token Type Names}.

@item
@cindex character token
@cindex literal token
@cindex single-character literal
A @dfn{character token type} (or @dfn{literal character token}) is
written in the grammar using the same syntax used in C for character
constants; for example, @code{'+'} is a character token type.  A
character token type doesn't need to be declared unless you need to
specify its semantic value data type (@pxref{Value Type, ,Data Types of
Semantic Values}), associativity, or precedence (@pxref{Precedence,
,Operator Precedence}).

By convention, a character token type is used only to represent a
token that consists of that particular character.  Thus, the token
type @code{'+'} is used to represent the character @samp{+} as a
token.  Nothing enforces this convention, but if you depart from it,
your program will confuse other readers.

All the usual escape sequences used in character literals in C can be
used in Bison as well, but you must not use the null character as a
character literal because its numeric code, zero, signifies
end-of-input (@pxref{Calling Convention, ,Calling Convention
for @code{yylex}}).  Also, unlike standard C, trigraphs have no
special meaning in Bison character literals, nor is backslash-newline
allowed.

@item
@cindex string token
@cindex literal string token
@cindex multicharacter literal
A @dfn{literal string token} is written like a C string constant; for
example, @code{"<="} is a literal string token.  A literal string token
doesn't need to be declared unless you need to specify its semantic
value data type (@pxref{Value Type}), associativity, or precedence
(@pxref{Precedence}).

You can associate the literal string token with a symbolic name as an
alias, using the @code{%token} declaration (@pxref{Token Decl, ,Token
Declarations}).  If you don't do that, the lexical analyzer has to
retrieve the token number for the literal string token from the
@code{yytname} table (@pxref{Calling Convention}).

@strong{Warning}: literal string tokens do not work in Yacc.

By convention, a literal string token is used only to represent a token
that consists of that particular string.  Thus, you should use the token
type @code{"<="} to represent the string @samp{<=} as a token.  Bison
does not enforce this convention, but if you depart from it, people who
read your program will be confused.

All the escape sequences used in string literals in C can be used in
Bison as well, except that you must not use a null character within a
string literal.  Also, unlike Standard C, trigraphs have no special
meaning in Bison string literals, nor is backslash-newline allowed.  A
literal string token must contain two or more characters; for a token
containing just one character, use a character token (see above).
@end itemize

How you choose to write a terminal symbol has no effect on its
grammatical meaning.  That depends only on where it appears in rules and
on when the parser function returns that symbol.

The value returned by @code{yylex} is always one of the terminal
symbols, except that a zero or negative value signifies end-of-input.
Whichever way you write the token type in the grammar rules, you write
it the same way in the definition of @code{yylex}.  The numeric code
for a character token type is simply the positive numeric code of the
character, so @code{yylex} can use the identical value to generate the
requisite code, though you may need to convert it to @code{unsigned
char} to avoid sign-extension on hosts where @code{char} is signed.
Each named token type becomes a C macro in the parser implementation
file, so @code{yylex} can use the name to stand for the code.  (This
is why periods don't make sense in terminal symbols.)  @xref{Calling
Convention, ,Calling Convention for @code{yylex}}.

If @code{yylex} is defined in a separate file, you need to arrange for the
token-type macro definitions to be available there.  Use the @samp{-d}
option when you run Bison, so that it will write these macro definitions
into a separate header file @file{@var{name}.tab.h} which you can include
in the other source files that need it.  @xref{Invocation, ,Invoking Bison}.

If you want to write a grammar that is portable to any Standard C
host, you must use only nonnull character tokens taken from the basic
execution character set of Standard C@.  This set consists of the ten
digits, the 52 lower- and upper-case English letters, and the
characters in the following C-language string:

@example
"\a\b\t\n\v\f\r !\"#%&'()*+,-./:;<=>?[\\]^_@{|@}~"
@end example

The @code{yylex} function and Bison must use a consistent character set
and encoding for character tokens.  For example, if you run Bison in an
ASCII environment, but then compile and run the resulting
program in an environment that uses an incompatible character set like
EBCDIC, the resulting program may not work because the tables
generated by Bison will assume ASCII numeric values for
character tokens.  It is standard practice for software distributions to
contain C source files that were generated by Bison in an
ASCII environment, so installers on platforms that are
incompatible with ASCII must rebuild those files before
compiling them.

The symbol @code{error} is a terminal symbol reserved for error recovery
(@pxref{Error Recovery}); you shouldn't use it for any other purpose.
In particular, @code{yylex} should never return this value.  The default
value of the error token is 256, unless you explicitly assigned 256 to
one of your tokens with a @code{%token} declaration.

@node Rules
@section Grammar Rules

A Bison grammar is a list of rules.

@menu
* Rules Syntax::   Syntax of the rules.
* Empty Rules::    Symbols that can match the empty string.
* Recursion::      Writing recursive rules.
@end menu

@node Rules Syntax
@subsection Syntax of Grammar Rules
@cindex rule syntax
@cindex grammar rule syntax
@cindex syntax of grammar rules

A Bison grammar rule has the following general form:

@example
@var{result}: @var{components}@dots{};
@end example

@noindent
where @var{result} is the nonterminal symbol that this rule describes,
and @var{components} are various terminal and nonterminal symbols that
are put together by this rule (@pxref{Symbols}).

For example,

@example
exp: exp '+' exp;
@end example

@noindent
says that two groupings of type @code{exp}, with a @samp{+} token in between,
can be combined into a larger grouping of type @code{exp}.

White space in rules is significant only to separate symbols.  You can add
extra white space as you wish.

Scattered among the components can be @var{actions} that determine
the semantics of the rule.  An action looks like this:

@example
@{@var{C statements}@}
@end example

@noindent
@cindex braced code
This is an example of @dfn{braced code}, that is, C code surrounded by
braces, much like a compound statement in C@.  Braced code can contain
any sequence of C tokens, so long as its braces are balanced.  Bison
does not check the braced code for correctness directly; it merely
copies the code to the parser implementation file, where the C
compiler can check it.

Within braced code, the balanced-brace count is not affected by braces
within comments, string literals, or character constants, but it is
affected by the C digraphs @samp{<%} and @samp{%>} that represent
braces.  At the top level braced code must be terminated by @samp{@}}
and not by a digraph.  Bison does not look for trigraphs, so if braced
code uses trigraphs you should ensure that they do not affect the
nesting of braces or the boundaries of comments, string literals, or
character constants.

Usually there is only one action and it follows the components.
@xref{Actions}.

@findex |
Multiple rules for the same @var{result} can be written separately or can
be joined with the vertical-bar character @samp{|} as follows:

@example
@group
@var{result}:
  @var{rule1-components}@dots{}
| @var{rule2-components}@dots{}
@dots{}
;
@end group
@end example

@noindent
They are still considered distinct rules even when joined in this way.

@node Empty Rules
@subsection Empty Rules
@cindex empty rule
@cindex rule, empty
@findex %empty

A rule is said to be @dfn{empty} if its right-hand side (@var{components})
is empty.  It means that @var{result} can match the empty string.  For
example, here is how to define an optional semicolon:

@example
semicolon.opt: | ";";
@end example

@noindent
It is easy not to see an empty rule, especially when @code{|} is used.  The
@code{%empty} directive allows to make explicit that a rule is empty on
purpose:

@example
@group
semicolon.opt:
  %empty
| ";"
;
@end group
@end example

Flagging a non-empty rule with @code{%empty} is an error.  If run with
@option{-Wempty-rule}, @command{bison} will report empty rules without
@code{%empty}.  Using @code{%empty} enables this warning, unless
@option{-Wno-empty-rule} was specified.

The @code{%empty} directive is a Bison extension, it does not work with
Yacc.  To remain compatible with POSIX Yacc, it is customary to write a
comment @samp{/* empty */} in each rule with no components:

@example
@group
semicolon.opt:
  /* empty */
| ";"
;
@end group
@end example


@node Recursion
@subsection Recursive Rules
@cindex recursive rule
@cindex rule, recursive

A rule is called @dfn{recursive} when its @var{result} nonterminal
appears also on its right hand side.  Nearly all Bison grammars need to
use recursion, because that is the only way to define a sequence of any
number of a particular thing.  Consider this recursive definition of a
comma-separated sequence of one or more expressions:

@example
@group
expseq1:
  exp
| expseq1 ',' exp
;
@end group
@end example

@cindex left recursion
@cindex right recursion
@noindent
Since the recursive use of @code{expseq1} is the leftmost symbol in the
right hand side, we call this @dfn{left recursion}.  By contrast, here
the same construct is defined using @dfn{right recursion}:

@example
@group
expseq1:
  exp
| exp ',' expseq1
;
@end group
@end example

@noindent
Any kind of sequence can be defined using either left recursion or right
recursion, but you should always use left recursion, because it can
parse a sequence of any number of elements with bounded stack space.
Right recursion uses up space on the Bison stack in proportion to the
number of elements in the sequence, because all the elements must be
shifted onto the stack before the rule can be applied even once.
@xref{Algorithm, ,The Bison Parser Algorithm}, for further explanation
of this.

@cindex mutual recursion
@dfn{Indirect} or @dfn{mutual} recursion occurs when the result of the
rule does not appear directly on its right hand side, but does appear
in rules for other nonterminals which do appear on its right hand
side.

For example:

@example
@group
expr:
  primary
| primary '+' primary
;
@end group

@group
primary:
  constant
| '(' expr ')'
;
@end group
@end example

@noindent
defines two mutually-recursive nonterminals, since each refers to the
other.

@node Semantics
@section Defining Language Semantics
@cindex defining language semantics
@cindex language semantics, defining

The grammar rules for a language determine only the syntax.  The semantics
are determined by the semantic values associated with various tokens and
groupings, and by the actions taken when various groupings are recognized.

For example, the calculator calculates properly because the value
associated with each expression is the proper number; it adds properly
because the action for the grouping @w{@samp{@var{x} + @var{y}}} is to add
the numbers associated with @var{x} and @var{y}.

@menu
* Value Type::        Specifying one data type for all semantic values.
* Multiple Types::    Specifying several alternative data types.
* Type Generation::   Generating the semantic value type.
* Union Decl::        Declaring the set of all semantic value types.
* Structured Value Type::  Providing a structured semantic value type.
* Actions::           An action is the semantic definition of a grammar rule.
* Action Types::      Specifying data types for actions to operate on.
* Mid-Rule Actions::  Most actions go at the end of a rule.
                      This says when, why and how to use the exceptional
                        action in the middle of a rule.
@end menu

@node Value Type
@subsection Data Types of Semantic Values
@cindex semantic value type
@cindex value type, semantic
@cindex data types of semantic values
@cindex default data type

In a simple program it may be sufficient to use the same data type for
the semantic values of all language constructs.  This was true in the
RPN and infix calculator examples (@pxref{RPN Calc, ,Reverse Polish
Notation Calculator}).

Bison normally uses the type @code{int} for semantic values if your
program uses the same data type for all language constructs.  To
specify some other type, define the @code{%define} variable
@code{api.value.type} like this:

@example
%define api.value.type @{double@}
@end example

@noindent
or

@example
%define api.value.type @{struct semantic_type@}
@end example

The value of @code{api.value.type} should be a type name that does not
contain parentheses or square brackets.

Alternatively, instead of relying of Bison's @code{%define} support, you may
rely on the C/C++ preprocessor and define @code{YYSTYPE} as a macro, like
this:

@example
#define YYSTYPE double
@end example

@noindent
This macro definition must go in the prologue of the grammar file
(@pxref{Grammar Outline, ,Outline of a Bison Grammar}).  If compatibility
with POSIX Yacc matters to you, use this.  Note however that Bison cannot
know @code{YYSTYPE}'s value, not even whether it is defined, so there are
services it cannot provide.  Besides this works only for languages that have
a preprocessor.

@node Multiple Types
@subsection More Than One Value Type

In most programs, you will need different data types for different kinds
of tokens and groupings.  For example, a numeric constant may need type
@code{int} or @code{long int}, while a string constant needs type
@code{char *}, and an identifier might need a pointer to an entry in the
symbol table.

To use more than one data type for semantic values in one parser, Bison
requires you to do two things:

@itemize @bullet
@item
Specify the entire collection of possible data types.  There are several
options:
@itemize @bullet
@item
let Bison compute the union type from the tags you assign to symbols;

@item
use the @code{%union} Bison declaration (@pxref{Union Decl, ,The Union
Declaration});

@item
define the @code{%define} variable @code{api.value.type} to be a union type
whose members are the type tags (@pxref{Structured Value Type,, Providing a
Structured Semantic Value Type});

@item
use a @code{typedef} or a @code{#define} to define @code{YYSTYPE} to be a
union type whose member names are the type tags.
@end itemize

@item
Choose one of those types for each symbol (terminal or nonterminal) for
which semantic values are used.  This is done for tokens with the
@code{%token} Bison declaration (@pxref{Token Decl, ,Token Type Names})
and for groupings with the @code{%type} Bison declaration (@pxref{Type
Decl, ,Nonterminal Symbols}).
@end itemize

@node Type Generation
@subsection Generating the Semantic Value Type
@cindex declaring value types
@cindex value types, declaring
@findex %define api.value.type union

The special value @code{union} of the @code{%define} variable
@code{api.value.type} instructs Bison that the tags used with the
@code{%token} and @code{%type} directives are genuine types, not names of
members of @code{YYSTYPE}.

For example:

@example
%define api.value.type union
%token <int> INT "integer"
%token <int> 'n'
%type <int> expr
%token <char const *> ID "identifier"
@end example

@noindent
generates an appropriate value of @code{YYSTYPE} to support each symbol
type.  The name of the member of @code{YYSTYPE} for tokens than have a
declared identifier @var{id} (such as @code{INT} and @code{ID} above, but
not @code{'n'}) is @code{@var{id}}.  The other symbols have unspecified
names on which you should not depend; instead, relying on C casts to access
the semantic value with the appropriate type:

@example
/* For an "integer".  */
yylval.INT = 42;
return INT;

/* For an 'n', also declared as int.  */
*((int*)&yylval) = 42;
return 'n';

/* For an "identifier".  */
yylval.ID = "42";
return ID;
@end example

If the @code{%define} variable @code{api.token.prefix} is defined
(@pxref{%define Summary,,api.token.prefix}), then it is also used to prefix
the union member names.  For instance, with @samp{%define api.token.prefix
TOK_}:

@example
/* For an "integer".  */
yylval.TOK_INT = 42;
return TOK_INT;
@end example

This Bison extension cannot work if @code{%yacc} (or
@option{-y}/@option{--yacc}) is enabled, as POSIX mandates that Yacc
generate tokens as macros (e.g., @samp{#define INT 258}, or @samp{#define
TOK_INT 258}).

This feature is new, and user feedback would be most welcome.

A similar feature is provided for C++ that in addition overcomes C++
limitations (that forbid non-trivial objects to be part of a @code{union}):
@samp{%define api.value.type variant}, see @ref{C++ Variants}.

@node Union Decl
@subsection The Union Declaration
@cindex declaring value types
@cindex value types, declaring
@findex %union

The @code{%union} declaration specifies the entire collection of possible
data types for semantic values.  The keyword @code{%union} is followed by
braced code containing the same thing that goes inside a @code{union} in C@.

For example:

@example
@group
%union @{
  double val;
  symrec *tptr;
@}
@end group
@end example

@noindent
This says that the two alternative types are @code{double} and @code{symrec
*}.  They are given names @code{val} and @code{tptr}; these names are used
in the @code{%token} and @code{%type} declarations to pick one of the types
for a terminal or nonterminal symbol (@pxref{Type Decl, ,Nonterminal Symbols}).

As an extension to POSIX, a tag is allowed after the @code{%union}.  For
example:

@example
@group
%union value @{
  double val;
  symrec *tptr;
@}
@end group
@end example

@noindent
specifies the union tag @code{value}, so the corresponding C type is
@code{union value}.  If you do not specify a tag, it defaults to
@code{YYSTYPE}.

As another extension to POSIX, you may specify multiple @code{%union}
declarations; their contents are concatenated.  However, only the first
@code{%union} declaration can specify a tag.

Note that, unlike making a @code{union} declaration in C, you need not write
a semicolon after the closing brace.

@node Structured Value Type
@subsection Providing a Structured Semantic Value Type
@cindex declaring value types
@cindex value types, declaring
@findex %union

Instead of @code{%union}, you can define and use your own union type
@code{YYSTYPE} if your grammar contains at least one @samp{<@var{type}>}
tag.  For example, you can put the following into a header file
@file{parser.h}:

@example
@group
union YYSTYPE @{
  double val;
  symrec *tptr;
@};
@end group
@end example

@noindent
and then your grammar can use the following instead of @code{%union}:

@example
@group
%@{
#include "parser.h"
%@}
%define api.value.type "union YYSTYPE"
%type <val> expr
%token <tptr> ID
@end group
@end example

Actually, you may also provide a @code{struct} rather that a @code{union},
which may be handy if you want to track information for every symbol (such
as preceding comments).

The type you provide may even be structured and include pointers, in which
case the type tags you provide may be composite, with @samp{.} and @samp{->}
operators.

@node Actions
@subsection Actions
@cindex action
@vindex $$
@vindex $@var{n}
@vindex $@var{name}
@vindex $[@var{name}]

An action accompanies a syntactic rule and contains C code to be executed
each time an instance of that rule is recognized.  The task of most actions
is to compute a semantic value for the grouping built by the rule from the
semantic values associated with tokens or smaller groupings.

An action consists of braced code containing C statements, and can be
placed at any position in the rule;
it is executed at that position.  Most rules have just one action at the
end of the rule, following all the components.  Actions in the middle of
a rule are tricky and used only for special purposes (@pxref{Mid-Rule
Actions, ,Actions in Mid-Rule}).

The C code in an action can refer to the semantic values of the
components matched by the rule with the construct @code{$@var{n}},
which stands for the value of the @var{n}th component.  The semantic
value for the grouping being constructed is @code{$$}.  In addition,
the semantic values of symbols can be accessed with the named
references construct @code{$@var{name}} or @code{$[@var{name}]}.
Bison translates both of these constructs into expressions of the
appropriate type when it copies the actions into the parser
implementation file.  @code{$$} (or @code{$@var{name}}, when it stands
for the current grouping) is translated to a modifiable lvalue, so it
can be assigned to.

Here is a typical example:

@example
@group
exp:
@dots{}
| exp '+' exp     @{ $$ = $1 + $3; @}
@end group
@end example

Or, in terms of named references:

@example
@group
exp[result]:
@dots{}
| exp[left] '+' exp[right]  @{ $result = $left + $right; @}
@end group
@end example

@noindent
This rule constructs an @code{exp} from two smaller @code{exp} groupings
connected by a plus-sign token.  In the action, @code{$1} and @code{$3}
(@code{$left} and @code{$right})
refer to the semantic values of the two component @code{exp} groupings,
which are the first and third symbols on the right hand side of the rule.
The sum is stored into @code{$$} (@code{$result}) so that it becomes the
semantic value of
the addition-expression just recognized by the rule.  If there were a
useful semantic value associated with the @samp{+} token, it could be
referred to as @code{$2}.

@xref{Named References}, for more information about using the named
references construct.

Note that the vertical-bar character @samp{|} is really a rule
separator, and actions are attached to a single rule.  This is a
difference with tools like Flex, for which @samp{|} stands for either
``or'', or ``the same action as that of the next rule''.  In the
following example, the action is triggered only when @samp{b} is found:

@example
a-or-b: 'a'|'b'   @{ a_or_b_found = 1; @};
@end example

@cindex default action
If you don't specify an action for a rule, Bison supplies a default:
@w{@code{$$ = $1}.}  Thus, the value of the first symbol in the rule
becomes the value of the whole rule.  Of course, the default action is
valid only if the two data types match.  There is no meaningful default
action for an empty rule; every empty rule must have an explicit action
unless the rule's value does not matter.

@code{$@var{n}} with @var{n} zero or negative is allowed for reference
to tokens and groupings on the stack @emph{before} those that match the
current rule.  This is a very risky practice, and to use it reliably
you must be certain of the context in which the rule is applied.  Here
is a case in which you can use this reliably:

@example
@group
foo:
  expr bar '+' expr  @{ @dots{} @}
| expr bar '-' expr  @{ @dots{} @}
;
@end group

@group
bar:
  %empty    @{ previous_expr = $0; @}
;
@end group
@end example

As long as @code{bar} is used only in the fashion shown here, @code{$0}
always refers to the @code{expr} which precedes @code{bar} in the
definition of @code{foo}.

@vindex yylval
It is also possible to access the semantic value of the lookahead token, if
any, from a semantic action.
This semantic value is stored in @code{yylval}.
@xref{Action Features, ,Special Features for Use in Actions}.

@node Action Types
@subsection Data Types of Values in Actions
@cindex action data types
@cindex data types in actions

If you have chosen a single data type for semantic values, the @code{$$}
and @code{$@var{n}} constructs always have that data type.

If you have used @code{%union} to specify a variety of data types, then you
must declare a choice among these types for each terminal or nonterminal
symbol that can have a semantic value.  Then each time you use @code{$$} or
@code{$@var{n}}, its data type is determined by which symbol it refers to
in the rule.  In this example,

@example
@group
exp:
  @dots{}
| exp '+' exp    @{ $$ = $1 + $3; @}
@end group
@end example

@noindent
@code{$1} and @code{$3} refer to instances of @code{exp}, so they all
have the data type declared for the nonterminal symbol @code{exp}.  If
@code{$2} were used, it would have the data type declared for the
terminal symbol @code{'+'}, whatever that might be.

Alternatively, you can specify the data type when you refer to the value,
by inserting @samp{<@var{type}>} after the @samp{$} at the beginning of the
reference.  For example, if you have defined types as shown here:

@example
@group
%union @{
  int itype;
  double dtype;
@}
@end group
@end example

@noindent
then you can write @code{$<itype>1} to refer to the first subunit of the
rule as an integer, or @code{$<dtype>1} to refer to it as a double.

@node Mid-Rule Actions
@subsection Actions in Mid-Rule
@cindex actions in mid-rule
@cindex mid-rule actions

Occasionally it is useful to put an action in the middle of a rule.
These actions are written just like usual end-of-rule actions, but they
are executed before the parser even recognizes the following components.

@menu
* Using Mid-Rule Actions::       Putting an action in the middle of a rule.
* Mid-Rule Action Translation::  How mid-rule actions are actually processed.
* Mid-Rule Conflicts::           Mid-rule actions can cause conflicts.
@end menu

@node Using Mid-Rule Actions
@subsubsection Using Mid-Rule Actions

A mid-rule action may refer to the components preceding it using
@code{$@var{n}}, but it may not refer to subsequent components because
it is run before they are parsed.

The mid-rule action itself counts as one of the components of the rule.
This makes a difference when there is another action later in the same rule
(and usually there is another at the end): you have to count the actions
along with the symbols when working out which number @var{n} to use in
@code{$@var{n}}.

The mid-rule action can also have a semantic value.  The action can set
its value with an assignment to @code{$$}, and actions later in the rule
can refer to the value using @code{$@var{n}}.  Since there is no symbol
to name the action, there is no way to declare a data type for the value
in advance, so you must use the @samp{$<@dots{}>@var{n}} construct to
specify a data type each time you refer to this value.

There is no way to set the value of the entire rule with a mid-rule
action, because assignments to @code{$$} do not have that effect.  The
only way to set the value for the entire rule is with an ordinary action
at the end of the rule.

Here is an example from a hypothetical compiler, handling a @code{let}
statement that looks like @samp{let (@var{variable}) @var{statement}} and
serves to create a variable named @var{variable} temporarily for the
duration of @var{statement}.  To parse this construct, we must put
@var{variable} into the symbol table while @var{statement} is parsed, then
remove it afterward.  Here is how it is done:

@example
@group
stmt:
  "let" '(' var ')'
    @{
      $<context>$ = push_context ();
      declare_variable ($3);
    @}
  stmt
    @{
      $$ = $6;
      pop_context ($<context>5);
    @}
@end group
@end example

@noindent
As soon as @samp{let (@var{variable})} has been recognized, the first
action is run.  It saves a copy of the current semantic context (the
list of accessible variables) as its semantic value, using alternative
@code{context} in the data-type union.  Then it calls
@code{declare_variable} to add the new variable to that list.  Once the
first action is finished, the embedded statement @code{stmt} can be
parsed.

Note that the mid-rule action is component number 5, so the @samp{stmt} is
component number 6.  Named references can be used to improve the readability
and maintainability (@pxref{Named References}):

@example
@group
stmt:
  "let" '(' var ')'
    @{
      $<context>let = push_context ();
      declare_variable ($3);
    @}[let]
  stmt
    @{
      $$ = $6;
      pop_context ($<context>let);
    @}
@end group
@end example

After the embedded statement is parsed, its semantic value becomes the
value of the entire @code{let}-statement.  Then the semantic value from the
earlier action is used to restore the prior list of variables.  This
removes the temporary @code{let}-variable from the list so that it won't
appear to exist while the rest of the program is parsed.

@findex %destructor
@cindex discarded symbols, mid-rule actions
@cindex error recovery, mid-rule actions
In the above example, if the parser initiates error recovery (@pxref{Error
Recovery}) while parsing the tokens in the embedded statement @code{stmt},
it might discard the previous semantic context @code{$<context>5} without
restoring it.
Thus, @code{$<context>5} needs a destructor (@pxref{Destructor Decl, , Freeing
Discarded Symbols}).
However, Bison currently provides no means to declare a destructor specific to
a particular mid-rule action's semantic value.

One solution is to bury the mid-rule action inside a nonterminal symbol and to
declare a destructor for that symbol:

@example
@group
%type <context> let
%destructor @{ pop_context ($$); @} let
@end group

%%

@group
stmt:
  let stmt
    @{
      $$ = $2;
      pop_context ($let);
    @};
@end group

@group
let:
  "let" '(' var ')'
    @{
      $let = push_context ();
      declare_variable ($3);
    @};

@end group
@end example

@noindent
Note that the action is now at the end of its rule.
Any mid-rule action can be converted to an end-of-rule action in this way, and
this is what Bison actually does to implement mid-rule actions.

@node Mid-Rule Action Translation
@subsubsection Mid-Rule Action Translation
@vindex $@@@var{n}
@vindex @@@var{n}

As hinted earlier, mid-rule actions are actually transformed into regular
rules and actions.  The various reports generated by Bison (textual,
graphical, etc., see @ref{Understanding, , Understanding Your Parser})
reveal this translation, best explained by means of an example.  The
following rule:

@example
exp: @{ a(); @} "b" @{ c(); @} @{ d(); @} "e" @{ f(); @};
@end example

@noindent
is translated into:

@example
$@@1: %empty @{ a(); @};
$@@2: %empty @{ c(); @};
$@@3: %empty @{ d(); @};
exp: $@@1 "b" $@@2 $@@3 "e" @{ f(); @};
@end example

@noindent
with new nonterminal symbols @code{$@@@var{n}}, where @var{n} is a number.

A mid-rule action is expected to generate a value if it uses @code{$$}, or
the (final) action uses @code{$@var{n}} where @var{n} denote the mid-rule
action.  In that case its nonterminal is rather named @code{@@@var{n}}:

@example
exp: @{ a(); @} "b" @{ $$ = c(); @} @{ d(); @} "e" @{ f = $1; @};
@end example

@noindent
is translated into

@example
@@1: %empty @{ a(); @};
@@2: %empty @{ $$ = c(); @};
$@@3: %empty @{ d(); @};
exp: @@1 "b" @@2 $@@3 "e" @{ f = $1; @}
@end example

There are probably two errors in the above example: the first mid-rule
action does not generate a value (it does not use @code{$$} although the
final action uses it), and the value of the second one is not used (the
final action does not use @code{$3}).  Bison reports these errors when the
@code{midrule-value} warnings are enabled (@pxref{Invocation, ,Invoking
Bison}):

@example
$ bison -fcaret -Wmidrule-value mid.y
@group
mid.y:2.6-13: warning: unset value: $$
 exp: @{ a(); @} "b" @{ $$ = c(); @} @{ d(); @} "e" @{ f = $1; @};
      ^^^^^^^^
@end group
@group
mid.y:2.19-31: warning: unused value: $3
 exp: @{ a(); @} "b" @{ $$ = c(); @} @{ d(); @} "e" @{ f = $1; @};
                   ^^^^^^^^^^^^^
@end group
@end example


@node Mid-Rule Conflicts
@subsubsection Conflicts due to Mid-Rule Actions
Taking action before a rule is completely recognized often leads to
conflicts since the parser must commit to a parse in order to execute the
action.  For example, the following two rules, without mid-rule actions,
can coexist in a working parser because the parser can shift the open-brace
token and look at what follows before deciding whether there is a
declaration or not:

@example
@group
compound:
  '@{' declarations statements '@}'
| '@{' statements '@}'
;
@end group
@end example

@noindent
But when we add a mid-rule action as follows, the rules become nonfunctional:

@example
@group
compound:
  @{ prepare_for_local_variables (); @}
     '@{' declarations statements '@}'
@end group
@group
|    '@{' statements '@}'
;
@end group
@end example

@noindent
Now the parser is forced to decide whether to run the mid-rule action
when it has read no farther than the open-brace.  In other words, it
must commit to using one rule or the other, without sufficient
information to do it correctly.  (The open-brace token is what is called
the @dfn{lookahead} token at this time, since the parser is still
deciding what to do about it.  @xref{Lookahead, ,Lookahead Tokens}.)

You might think that you could correct the problem by putting identical
actions into the two rules, like this:

@example
@group
compound:
  @{ prepare_for_local_variables (); @}
    '@{' declarations statements '@}'
| @{ prepare_for_local_variables (); @}
    '@{' statements '@}'
;
@end group
@end example

@noindent
But this does not help, because Bison does not realize that the two actions
are identical.  (Bison never tries to understand the C code in an action.)

If the grammar is such that a declaration can be distinguished from a
statement by the first token (which is true in C), then one solution which
does work is to put the action after the open-brace, like this:

@example
@group
compound:
  '@{' @{ prepare_for_local_variables (); @}
    declarations statements '@}'
| '@{' statements '@}'
;
@end group
@end example

@noindent
Now the first token of the following declaration or statement,
which would in any case tell Bison which rule to use, can still do so.

Another solution is to bury the action inside a nonterminal symbol which
serves as a subroutine:

@example
@group
subroutine:
  %empty  @{ prepare_for_local_variables (); @}
;
@end group

@group
compound:
  subroutine '@{' declarations statements '@}'
| subroutine '@{' statements '@}'
;
@end group
@end example

@noindent
Now Bison can execute the action in the rule for @code{subroutine} without
deciding which rule for @code{compound} it will eventually use.


@node Tracking Locations
@section Tracking Locations
@cindex location
@cindex textual location
@cindex location, textual

Though grammar rules and semantic actions are enough to write a fully
functional parser, it can be useful to process some additional information,
especially symbol locations.

The way locations are handled is defined by providing a data type, and
actions to take when rules are matched.

@menu
* Location Type::               Specifying a data type for locations.
* Actions and Locations::       Using locations in actions.
* Location Default Action::     Defining a general way to compute locations.
@end menu

@node Location Type
@subsection Data Type of Locations
@cindex data type of locations
@cindex default location type

Defining a data type for locations is much simpler than for semantic values,
since all tokens and groupings always use the same type.

You can specify the type of locations by defining a macro called
@code{YYLTYPE}, just as you can specify the semantic value type by
defining a @code{YYSTYPE} macro (@pxref{Value Type}).
When @code{YYLTYPE} is not defined, Bison uses a default structure type with
four members:

@example
typedef struct YYLTYPE
@{
  int first_line;
  int first_column;
  int last_line;
  int last_column;
@} YYLTYPE;
@end example

When @code{YYLTYPE} is not defined, at the beginning of the parsing, Bison
initializes all these fields to 1 for @code{yylloc}.  To initialize
@code{yylloc} with a custom location type (or to chose a different
initialization), use the @code{%initial-action} directive.  @xref{Initial
Action Decl, , Performing Actions before Parsing}.

@node Actions and Locations
@subsection Actions and Locations
@cindex location actions
@cindex actions, location
@vindex @@$
@vindex @@@var{n}
@vindex @@@var{name}
@vindex @@[@var{name}]

Actions are not only useful for defining language semantics, but also for
describing the behavior of the output parser with locations.

The most obvious way for building locations of syntactic groupings is very
similar to the way semantic values are computed.  In a given rule, several
constructs can be used to access the locations of the elements being matched.
The location of the @var{n}th component of the right hand side is
@code{@@@var{n}}, while the location of the left hand side grouping is
@code{@@$}.

In addition, the named references construct @code{@@@var{name}} and
@code{@@[@var{name}]} may also be used to address the symbol locations.
@xref{Named References}, for more information about using the named
references construct.

Here is a basic example using the default data type for locations:

@example
@group
exp:
  @dots{}
| exp '/' exp
    @{
      @@$.first_column = @@1.first_column;
      @@$.first_line = @@1.first_line;
      @@$.last_column = @@3.last_column;
      @@$.last_line = @@3.last_line;
      if ($3)
        $$ = $1 / $3;
      else
        @{
          $$ = 1;
          fprintf (stderr, "%d.%d-%d.%d: division by zero",
                   @@3.first_line, @@3.first_column,
                   @@3.last_line, @@3.last_column);
        @}
    @}
@end group
@end example

As for semantic values, there is a default action for locations that is
run each time a rule is matched.  It sets the beginning of @code{@@$} to the
beginning of the first symbol, and the end of @code{@@$} to the end of the
last symbol.

With this default action, the location tracking can be fully automatic.  The
example above simply rewrites this way:

@example
@group
exp:
  @dots{}
| exp '/' exp
    @{
      if ($3)
        $$ = $1 / $3;
      else
        @{
          $$ = 1;
          fprintf (stderr, "%d.%d-%d.%d: division by zero",
                   @@3.first_line, @@3.first_column,
                   @@3.last_line, @@3.last_column);
        @}
    @}
@end group
@end example

@vindex yylloc
It is also possible to access the location of the lookahead token, if any,
from a semantic action.
This location is stored in @code{yylloc}.
@xref{Action Features, ,Special Features for Use in Actions}.

@node Location Default Action
@subsection Default Action for Locations
@vindex YYLLOC_DEFAULT
@cindex GLR parsers and @code{YYLLOC_DEFAULT}

Actually, actions are not the best place to compute locations.  Since
locations are much more general than semantic values, there is room in
the output parser to redefine the default action to take for each
rule.  The @code{YYLLOC_DEFAULT} macro is invoked each time a rule is
matched, before the associated action is run.  It is also invoked
while processing a syntax error, to compute the error's location.
Before reporting an unresolvable syntactic ambiguity, a GLR
parser invokes @code{YYLLOC_DEFAULT} recursively to compute the location
of that ambiguity.

Most of the time, this macro is general enough to suppress location
dedicated code from semantic actions.

The @code{YYLLOC_DEFAULT} macro takes three parameters.  The first one is
the location of the grouping (the result of the computation).  When a
rule is matched, the second parameter identifies locations of
all right hand side elements of the rule being matched, and the third
parameter is the size of the rule's right hand side.
When a GLR parser reports an ambiguity, which of multiple candidate
right hand sides it passes to @code{YYLLOC_DEFAULT} is undefined.
When processing a syntax error, the second parameter identifies locations
of the symbols that were discarded during error processing, and the third
parameter is the number of discarded symbols.

By default, @code{YYLLOC_DEFAULT} is defined this way:

@example
@group
# define YYLLOC_DEFAULT(Cur, Rhs, N)                      \
do                                                        \
  if (N)                                                  \
    @{                                                     \
      (Cur).first_line   = YYRHSLOC(Rhs, 1).first_line;   \
      (Cur).first_column = YYRHSLOC(Rhs, 1).first_column; \
      (Cur).last_line    = YYRHSLOC(Rhs, N).last_line;    \
      (Cur).last_column  = YYRHSLOC(Rhs, N).last_column;  \
    @}                                                     \
  else                                                    \
    @{                                                     \
      (Cur).first_line   = (Cur).last_line   =            \
        YYRHSLOC(Rhs, 0).last_line;                       \
      (Cur).first_column = (Cur).last_column =            \
        YYRHSLOC(Rhs, 0).last_column;                     \
    @}                                                     \
while (0)
@end group
@end example

@noindent
where @code{YYRHSLOC (rhs, k)} is the location of the @var{k}th symbol
in @var{rhs} when @var{k} is positive, and the location of the symbol
just before the reduction when @var{k} and @var{n} are both zero.

When defining @code{YYLLOC_DEFAULT}, you should consider that:

@itemize @bullet
@item
All arguments are free of side-effects.  However, only the first one (the
result) should be modified by @code{YYLLOC_DEFAULT}.

@item
For consistency with semantic actions, valid indexes within the
right hand side range from 1 to @var{n}.  When @var{n} is zero, only 0 is a
valid index, and it refers to the symbol just before the reduction.
During error processing @var{n} is always positive.

@item
Your macro should parenthesize its arguments, if need be, since the
actual arguments may not be surrounded by parentheses.  Also, your
macro should expand to something that can be used as a single
statement when it is followed by a semicolon.
@end itemize

@node Named References
@section Named References
@cindex named references

As described in the preceding sections, the traditional way to refer to any
semantic value or location is a @dfn{positional reference}, which takes the
form @code{$@var{n}}, @code{$$}, @code{@@@var{n}}, and @code{@@$}.  However,
such a reference is not very descriptive.  Moreover, if you later decide to
insert or remove symbols in the right-hand side of a grammar rule, the need
to renumber such references can be tedious and error-prone.

To avoid these issues, you can also refer to a semantic value or location
using a @dfn{named reference}.  First of all, original symbol names may be
used as named references.  For example:

@example
@group
invocation: op '(' args ')'
  @{ $invocation = new_invocation ($op, $args, @@invocation); @}
@end group
@end example

@noindent
Positional and named references can be mixed arbitrarily.  For example:

@example
@group
invocation: op '(' args ')'
  @{ $$ = new_invocation ($op, $args, @@$); @}
@end group
@end example

@noindent
However, sometimes regular symbol names are not sufficient due to
ambiguities:

@example
@group
exp: exp '/' exp
  @{ $exp = $exp / $exp; @} // $exp is ambiguous.

exp: exp '/' exp
  @{ $$ = $1 / $exp; @} // One usage is ambiguous.

exp: exp '/' exp
  @{ $$ = $1 / $3; @} // No error.
@end group
@end example

@noindent
When ambiguity occurs, explicitly declared names may be used for values and
locations.  Explicit names are declared as a bracketed name after a symbol
appearance in rule definitions.  For example:
@example
@group
exp[result]: exp[left] '/' exp[right]
  @{ $result = $left / $right; @}
@end group
@end example

@noindent
In order to access a semantic value generated by a mid-rule action, an
explicit name may also be declared by putting a bracketed name after the
closing brace of the mid-rule action code:
@example
@group
exp[res]: exp[x] '+' @{$left = $x;@}[left] exp[right]
  @{ $res = $left + $right; @}
@end group
@end example

@noindent

In references, in order to specify names containing dots and dashes, an explicit
bracketed syntax @code{$[name]} and @code{@@[name]} must be used:
@example
@group
if-stmt: "if" '(' expr ')' "then" then.stmt ';'
  @{ $[if-stmt] = new_if_stmt ($expr, $[then.stmt]); @}
@end group
@end example

It often happens that named references are followed by a dot, dash or other
C punctuation marks and operators.  By default, Bison will read
@samp{$name.suffix} as a reference to symbol value @code{$name} followed by
@samp{.suffix}, i.e., an access to the @code{suffix} field of the semantic
value.  In order to force Bison to recognize @samp{name.suffix} in its
entirety as the name of a semantic value, the bracketed syntax
@samp{$[name.suffix]} must be used.

The named references feature is experimental.  More user feedback will help
to stabilize it.

@node Declarations
@section Bison Declarations
@cindex declarations, Bison
@cindex Bison declarations

The @dfn{Bison declarations} section of a Bison grammar defines the symbols
used in formulating the grammar and the data types of semantic values.
@xref{Symbols}.

All token type names (but not single-character literal tokens such as
@code{'+'} and @code{'*'}) must be declared.  Nonterminal symbols must be
declared if you need to specify which data type to use for the semantic
value (@pxref{Multiple Types, ,More Than One Value Type}).

The first rule in the grammar file also specifies the start symbol, by
default.  If you want some other symbol to be the start symbol, you
must declare it explicitly (@pxref{Language and Grammar, ,Languages
and Context-Free Grammars}).

@menu
* Require Decl::      Requiring a Bison version.
* Token Decl::        Declaring terminal symbols.
* Precedence Decl::   Declaring terminals with precedence and associativity.
* Type Decl::         Declaring the choice of type for a nonterminal symbol.
* Initial Action Decl::  Code run before parsing starts.
* Destructor Decl::   Declaring how symbols are freed.
* Printer Decl::      Declaring how symbol values are displayed.
* Expect Decl::       Suppressing warnings about parsing conflicts.
* Start Decl::        Specifying the start symbol.
* Pure Decl::         Requesting a reentrant parser.
* Push Decl::         Requesting a push parser.
* Decl Summary::      Table of all Bison declarations.
* %define Summary::   Defining variables to adjust Bison's behavior.
* %code Summary::     Inserting code into the parser source.
@end menu

@node Require Decl
@subsection Require a Version of Bison
@cindex version requirement
@cindex requiring a version of Bison
@findex %require

You may require the minimum version of Bison to process the grammar.  If
the requirement is not met, @command{bison} exits with an error (exit
status 63).

@example
%require "@var{version}"
@end example

@node Token Decl
@subsection Token Type Names
@cindex declaring token type names
@cindex token type names, declaring
@cindex declaring literal string tokens
@findex %token

The basic way to declare a token type name (terminal symbol) is as follows:

@example
%token @var{name}
@end example

Bison will convert this into a @code{#define} directive in
the parser, so that the function @code{yylex} (if it is in this file)
can use the name @var{name} to stand for this token type's code.

Alternatively, you can use @code{%left}, @code{%right},
@code{%precedence}, or
@code{%nonassoc} instead of @code{%token}, if you wish to specify
associativity and precedence.  @xref{Precedence Decl, ,Operator
Precedence}.

You can explicitly specify the numeric code for a token type by appending
a nonnegative decimal or hexadecimal integer value in the field immediately
following the token name:

@example
%token NUM 300
%token XNUM 0x12d // a GNU extension
@end example

@noindent
It is generally best, however, to let Bison choose the numeric codes for
all token types.  Bison will automatically select codes that don't conflict
with each other or with normal characters.

In the event that the stack type is a union, you must augment the
@code{%token} or other token declaration to include the data type
alternative delimited by angle-brackets (@pxref{Multiple Types, ,More
Than One Value Type}).

For example:

@example
@group
%union @{              /* define stack type */
  double val;
  symrec *tptr;
@}
%token <val> NUM      /* define token NUM and its type */
@end group
@end example

You can associate a literal string token with a token type name by
writing the literal string at the end of a @code{%token}
declaration which declares the name.  For example:

@example
%token arrow "=>"
@end example

@noindent
For example, a grammar for the C language might specify these names with
equivalent literal string tokens:

@example
%token  <operator>  OR      "||"
%token  <operator>  LE 134  "<="
%left  OR  "<="
@end example

@noindent
Once you equate the literal string and the token name, you can use them
interchangeably in further declarations or the grammar rules.  The
@code{yylex} function can use the token name or the literal string to
obtain the token type code number (@pxref{Calling Convention}).
Syntax error messages passed to @code{yyerror} from the parser will reference
the literal string instead of the token name.

The token numbered as 0 corresponds to end of file; the following line
allows for nicer error messages referring to ``end of file'' instead
of ``$end'':

@example
%token END 0 "end of file"
@end example

@node Precedence Decl
@subsection Operator Precedence
@cindex precedence declarations
@cindex declaring operator precedence
@cindex operator precedence, declaring

Use the @code{%left}, @code{%right}, @code{%nonassoc}, or
@code{%precedence} declaration to
declare a token and specify its precedence and associativity, all at
once.  These are called @dfn{precedence declarations}.
@xref{Precedence, ,Operator Precedence}, for general information on
operator precedence.

The syntax of a precedence declaration is nearly the same as that of
@code{%token}: either

@example
%left @var{symbols}@dots{}
@end example

@noindent
or

@example
%left <@var{type}> @var{symbols}@dots{}
@end example

And indeed any of these declarations serves the purposes of @code{%token}.
But in addition, they specify the associativity and relative precedence for
all the @var{symbols}:

@itemize @bullet
@item
The associativity of an operator @var{op} determines how repeated uses
of the operator nest: whether @samp{@var{x} @var{op} @var{y} @var{op}
@var{z}} is parsed by grouping @var{x} with @var{y} first or by
grouping @var{y} with @var{z} first.  @code{%left} specifies
left-associativity (grouping @var{x} with @var{y} first) and
@code{%right} specifies right-associativity (grouping @var{y} with
@var{z} first).  @code{%nonassoc} specifies no associativity, which
means that @samp{@var{x} @var{op} @var{y} @var{op} @var{z}} is
considered a syntax error.

@code{%precedence} gives only precedence to the @var{symbols}, and
defines no associativity at all.  Use this to define precedence only,
and leave any potential conflict due to associativity enabled.

@item
The precedence of an operator determines how it nests with other operators.
All the tokens declared in a single precedence declaration have equal
precedence and nest together according to their associativity.
When two tokens declared in different precedence declarations associate,
the one declared later has the higher precedence and is grouped first.
@end itemize

For backward compatibility, there is a confusing difference between the
argument lists of @code{%token} and precedence declarations.
Only a @code{%token} can associate a literal string with a token type name.
A precedence declaration always interprets a literal string as a reference to a
separate token.
For example:

@example
%left  OR "<="         // Does not declare an alias.
%left  OR 134 "<=" 135 // Declares 134 for OR and 135 for "<=".
@end example

@node Type Decl
@subsection Nonterminal Symbols
@cindex declaring value types, nonterminals
@cindex value types, nonterminals, declaring
@findex %type

@noindent
When you use @code{%union} to specify multiple value types, you must
declare the value type of each nonterminal symbol for which values are
used.  This is done with a @code{%type} declaration, like this:

@example
%type <@var{type}> @var{nonterminal}@dots{}
@end example

@noindent
Here @var{nonterminal} is the name of a nonterminal symbol, and
@var{type} is the name given in the @code{%union} to the alternative
that you want (@pxref{Union Decl, ,The Union Declaration}).  You
can give any number of nonterminal symbols in the same @code{%type}
declaration, if they have the same value type.  Use spaces to separate
the symbol names.

You can also declare the value type of a terminal symbol.  To do this,
use the same @code{<@var{type}>} construction in a declaration for the
terminal symbol.  All kinds of token declarations allow
@code{<@var{type}>}.

@node Initial Action Decl
@subsection Performing Actions before Parsing
@findex %initial-action

Sometimes your parser needs to perform some initializations before
parsing.  The @code{%initial-action} directive allows for such arbitrary
code.

@deffn {Directive} %initial-action @{ @var{code} @}
@findex %initial-action
Declare that the braced @var{code} must be invoked before parsing each time
@code{yyparse} is called.  The @var{code} may use @code{$$} (or
@code{$<@var{tag}>$}) and @code{@@$} --- initial value and location of the
lookahead --- and the @code{%parse-param}.
@end deffn

For instance, if your locations use a file name, you may use

@example
%parse-param @{ char const *file_name @};
%initial-action
@{
  @@$.initialize (file_name);
@};
@end example


@node Destructor Decl
@subsection Freeing Discarded Symbols
@cindex freeing discarded symbols
@findex %destructor
@findex <*>
@findex <>
During error recovery (@pxref{Error Recovery}), symbols already pushed
on the stack and tokens coming from the rest of the file are discarded
until the parser falls on its feet.  If the parser runs out of memory,
or if it returns via @code{YYABORT} or @code{YYACCEPT}, all the
symbols on the stack must be discarded.  Even if the parser succeeds, it
must discard the start symbol.

When discarded symbols convey heap based information, this memory is
lost.  While this behavior can be tolerable for batch parsers, such as
in traditional compilers, it is unacceptable for programs like shells or
protocol implementations that may parse and execute indefinitely.

The @code{%destructor} directive defines code that is called when a
symbol is automatically discarded.

@deffn {Directive} %destructor @{ @var{code} @} @var{symbols}
@findex %destructor
Invoke the braced @var{code} whenever the parser discards one of the
@var{symbols}.  Within @var{code}, @code{$$} (or @code{$<@var{tag}>$})
designates the semantic value associated with the discarded symbol, and
@code{@@$} designates its location.  The additional parser parameters are
also available (@pxref{Parser Function, , The Parser Function
@code{yyparse}}).

When a symbol is listed among @var{symbols}, its @code{%destructor} is called a
per-symbol @code{%destructor}.
You may also define a per-type @code{%destructor} by listing a semantic type
tag among @var{symbols}.
In that case, the parser will invoke this @var{code} whenever it discards any
grammar symbol that has that semantic type tag unless that symbol has its own
per-symbol @code{%destructor}.

Finally, you can define two different kinds of default @code{%destructor}s.
(These default forms are experimental.
More user feedback will help to determine whether they should become permanent
features.)
You can place each of @code{<*>} and @code{<>} in the @var{symbols} list of
exactly one @code{%destructor} declaration in your grammar file.
The parser will invoke the @var{code} associated with one of these whenever it
discards any user-defined grammar symbol that has no per-symbol and no per-type
@code{%destructor}.
The parser uses the @var{code} for @code{<*>} in the case of such a grammar
symbol for which you have formally declared a semantic type tag (@code{%type}
counts as such a declaration, but @code{$<tag>$} does not).
The parser uses the @var{code} for @code{<>} in the case of such a grammar
symbol that has no declared semantic type tag.
@end deffn

@noindent
For example:

@example
%union @{ char *string; @}
%token <string> STRING1 STRING2
%type  <string> string1 string2
%union @{ char character; @}
%token <character> CHR
%type  <character> chr
%token TAGLESS

%destructor @{ @} <character>
%destructor @{ free ($$); @} <*>
%destructor @{ free ($$); printf ("%d", @@$.first_line); @} STRING1 string1
%destructor @{ printf ("Discarding tagless symbol.\n"); @} <>
@end example

@noindent
guarantees that, when the parser discards any user-defined symbol that has a
semantic type tag other than @code{<character>}, it passes its semantic value
to @code{free} by default.
However, when the parser discards a @code{STRING1} or a @code{string1}, it also
prints its line number to @code{stdout}.
It performs only the second @code{%destructor} in this case, so it invokes
@code{free} only once.
Finally, the parser merely prints a message whenever it discards any symbol,
such as @code{TAGLESS}, that has no semantic type tag.

A Bison-generated parser invokes the default @code{%destructor}s only for
user-defined as opposed to Bison-defined symbols.
For example, the parser will not invoke either kind of default
@code{%destructor} for the special Bison-defined symbols @code{$accept},
@code{$undefined}, or @code{$end} (@pxref{Table of Symbols, ,Bison Symbols}),
none of which you can reference in your grammar.
It also will not invoke either for the @code{error} token (@pxref{Table of
Symbols, ,error}), which is always defined by Bison regardless of whether you
reference it in your grammar.
However, it may invoke one of them for the end token (token 0) if you
redefine it from @code{$end} to, for example, @code{END}:

@example
%token END 0
@end example

@cindex actions in mid-rule
@cindex mid-rule actions
Finally, Bison will never invoke a @code{%destructor} for an unreferenced
mid-rule semantic value (@pxref{Mid-Rule Actions,,Actions in Mid-Rule}).
That is, Bison does not consider a mid-rule to have a semantic value if you
do not reference @code{$$} in the mid-rule's action or @code{$@var{n}}
(where @var{n} is the right-hand side symbol position of the mid-rule) in
any later action in that rule.  However, if you do reference either, the
Bison-generated parser will invoke the @code{<>} @code{%destructor} whenever
it discards the mid-rule symbol.

@ignore
@noindent
In the future, it may be possible to redefine the @code{error} token as a
nonterminal that captures the discarded symbols.
In that case, the parser will invoke the default destructor for it as well.
@end ignore

@sp 1

@cindex discarded symbols
@dfn{Discarded symbols} are the following:

@itemize
@item
stacked symbols popped during the first phase of error recovery,
@item
incoming terminals during the second phase of error recovery,
@item
the current lookahead and the entire stack (except the current
right-hand side symbols) when the parser returns immediately, and
@item
the current lookahead and the entire stack (including the current right-hand
side symbols) when the C++ parser (@file{lalr1.cc}) catches an exception in
@code{parse},
@item
the start symbol, when the parser succeeds.
@end itemize

The parser can @dfn{return immediately} because of an explicit call to
@code{YYABORT} or @code{YYACCEPT}, or failed error recovery, or memory
exhaustion.

Right-hand side symbols of a rule that explicitly triggers a syntax
error via @code{YYERROR} are not discarded automatically.  As a rule
of thumb, destructors are invoked only when user actions cannot manage
the memory.

@node Printer Decl
@subsection Printing Semantic Values
@cindex printing semantic values
@findex %printer
@findex <*>
@findex <>
When run-time traces are enabled (@pxref{Tracing, ,Tracing Your Parser}),
the parser reports its actions, such as reductions.  When a symbol involved
in an action is reported, only its kind is displayed, as the parser cannot
know how semantic values should be formatted.

The @code{%printer} directive defines code that is called when a symbol is
reported.  Its syntax is the same as @code{%destructor} (@pxref{Destructor
Decl, , Freeing Discarded Symbols}).

@deffn {Directive} %printer @{ @var{code} @} @var{symbols}
@findex %printer
@vindex yyoutput
@c This is the same text as for %destructor.
Invoke the braced @var{code} whenever the parser displays one of the
@var{symbols}.  Within @var{code}, @code{yyoutput} denotes the output stream
(a @code{FILE*} in C, and an @code{std::ostream&} in C++), @code{$$} (or
@code{$<@var{tag}>$}) designates the semantic value associated with the
symbol, and @code{@@$} its location.  The additional parser parameters are
also available (@pxref{Parser Function, , The Parser Function
@code{yyparse}}).

The @var{symbols} are defined as for @code{%destructor} (@pxref{Destructor
Decl, , Freeing Discarded Symbols}.): they can be per-type (e.g.,
@samp{<ival>}), per-symbol (e.g., @samp{exp}, @samp{NUM}, @samp{"float"}),
typed per-default (i.e., @samp{<*>}, or untyped per-default (i.e.,
@samp{<>}).
@end deffn

@noindent
For example:

@example
%union @{ char *string; @}
%token <string> STRING1 STRING2
%type  <string> string1 string2
%union @{ char character; @}
%token <character> CHR
%type  <character> chr
%token TAGLESS

%printer @{ fprintf (yyoutput, "'%c'", $$); @} <character>
%printer @{ fprintf (yyoutput, "&%p", $$); @} <*>
%printer @{ fprintf (yyoutput, "\"%s\"", $$); @} STRING1 string1
%printer @{ fprintf (yyoutput, "<>"); @} <>
@end example

@noindent
guarantees that, when the parser print any symbol that has a semantic type
tag other than @code{<character>}, it display the address of the semantic
value by default.  However, when the parser displays a @code{STRING1} or a
@code{string1}, it formats it as a string in double quotes.  It performs
only the second @code{%printer} in this case, so it prints only once.
Finally, the parser print @samp{<>} for any symbol, such as @code{TAGLESS},
that has no semantic type tag.  See also


@node Expect Decl
@subsection Suppressing Conflict Warnings
@cindex suppressing conflict warnings
@cindex preventing warnings about conflicts
@cindex warnings, preventing
@cindex conflicts, suppressing warnings of
@findex %expect
@findex %expect-rr

Bison normally warns if there are any conflicts in the grammar
(@pxref{Shift/Reduce, ,Shift/Reduce Conflicts}), but most real grammars
have harmless shift/reduce conflicts which are resolved in a predictable
way and would be difficult to eliminate.  It is desirable to suppress
the warning about these conflicts unless the number of conflicts
changes.  You can do this with the @code{%expect} declaration.

The declaration looks like this:

@example
%expect @var{n}
@end example

Here @var{n} is a decimal integer.  The declaration says there should
be @var{n} shift/reduce conflicts and no reduce/reduce conflicts.
Bison reports an error if the number of shift/reduce conflicts differs
from @var{n}, or if there are any reduce/reduce conflicts.

For deterministic parsers, reduce/reduce conflicts are more
serious, and should be eliminated entirely.  Bison will always report
reduce/reduce conflicts for these parsers.  With GLR
parsers, however, both kinds of conflicts are routine; otherwise,
there would be no need to use GLR parsing.  Therefore, it is
also possible to specify an expected number of reduce/reduce conflicts
in GLR parsers, using the declaration:

@example
%expect-rr @var{n}
@end example

In general, using @code{%expect} involves these steps:

@itemize @bullet
@item
Compile your grammar without @code{%expect}.  Use the @samp{-v} option
to get a verbose list of where the conflicts occur.  Bison will also
print the number of conflicts.

@item
Check each of the conflicts to make sure that Bison's default
resolution is what you really want.  If not, rewrite the grammar and
go back to the beginning.

@item
Add an @code{%expect} declaration, copying the number @var{n} from the
number which Bison printed.  With GLR parsers, add an
@code{%expect-rr} declaration as well.
@end itemize

Now Bison will report an error if you introduce an unexpected conflict,
but will keep silent otherwise.

@node Start Decl
@subsection The Start-Symbol
@cindex declaring the start symbol
@cindex start symbol, declaring
@cindex default start symbol
@findex %start

Bison assumes by default that the start symbol for the grammar is the first
nonterminal specified in the grammar specification section.  The programmer
may override this restriction with the @code{%start} declaration as follows:

@example
%start @var{symbol}
@end example

@node Pure Decl
@subsection A Pure (Reentrant) Parser
@cindex reentrant parser
@cindex pure parser
@findex %define api.pure

A @dfn{reentrant} program is one which does not alter in the course of
execution; in other words, it consists entirely of @dfn{pure} (read-only)
code.  Reentrancy is important whenever asynchronous execution is possible;
for example, a nonreentrant program may not be safe to call from a signal
handler.  In systems with multiple threads of control, a nonreentrant
program must be called only within interlocks.

Normally, Bison generates a parser which is not reentrant.  This is
suitable for most uses, and it permits compatibility with Yacc.  (The
standard Yacc interfaces are inherently nonreentrant, because they use
statically allocated variables for communication with @code{yylex},
including @code{yylval} and @code{yylloc}.)

Alternatively, you can generate a pure, reentrant parser.  The Bison
declaration @samp{%define api.pure} says that you want the parser to be
reentrant.  It looks like this:

@example
%define api.pure full
@end example

The result is that the communication variables @code{yylval} and
@code{yylloc} become local variables in @code{yyparse}, and a different
calling convention is used for the lexical analyzer function
@code{yylex}.  @xref{Pure Calling, ,Calling Conventions for Pure
Parsers}, for the details of this.  The variable @code{yynerrs}
becomes local in @code{yyparse} in pull mode but it becomes a member
of @code{yypstate} in push mode.  (@pxref{Error Reporting, ,The Error
Reporting Function @code{yyerror}}).  The convention for calling
@code{yyparse} itself is unchanged.

Whether the parser is pure has nothing to do with the grammar rules.
You can generate either a pure parser or a nonreentrant parser from any
valid grammar.

@node Push Decl
@subsection A Push Parser
@cindex push parser
@cindex push parser
@findex %define api.push-pull

(The current push parsing interface is experimental and may evolve.
More user feedback will help to stabilize it.)

A pull parser is called once and it takes control until all its input
is completely parsed.  A push parser, on the other hand, is called
each time a new token is made available.

A push parser is typically useful when the parser is part of a
main event loop in the client's application.  This is typically
a requirement of a GUI, when the main event loop needs to be triggered
within a certain time period.

Normally, Bison generates a pull parser.
The following Bison declaration says that you want the parser to be a push
parser (@pxref{%define Summary,,api.push-pull}):

@example
%define api.push-pull push
@end example

In almost all cases, you want to ensure that your push parser is also
a pure parser (@pxref{Pure Decl, ,A Pure (Reentrant) Parser}).  The only
time you should create an impure push parser is to have backwards
compatibility with the impure Yacc pull mode interface.  Unless you know
what you are doing, your declarations should look like this:

@example
%define api.pure full
%define api.push-pull push
@end example

There is a major notable functional difference between the pure push parser
and the impure push parser.  It is acceptable for a pure push parser to have
many parser instances, of the same type of parser, in memory at the same time.
An impure push parser should only use one parser at a time.

When a push parser is selected, Bison will generate some new symbols in
the generated parser.  @code{yypstate} is a structure that the generated
parser uses to store the parser's state.  @code{yypstate_new} is the
function that will create a new parser instance.  @code{yypstate_delete}
will free the resources associated with the corresponding parser instance.
Finally, @code{yypush_parse} is the function that should be called whenever a
token is available to provide the parser.  A trivial example
of using a pure push parser would look like this:

@example
int status;
yypstate *ps = yypstate_new ();
do @{
  status = yypush_parse (ps, yylex (), NULL);
@} while (status == YYPUSH_MORE);
yypstate_delete (ps);
@end example

If the user decided to use an impure push parser, a few things about
the generated parser will change.  The @code{yychar} variable becomes
a global variable instead of a variable in the @code{yypush_parse} function.
For this reason, the signature of the @code{yypush_parse} function is
changed to remove the token as a parameter.  A nonreentrant push parser
example would thus look like this:

@example
extern int yychar;
int status;
yypstate *ps = yypstate_new ();
do @{
  yychar = yylex ();
  status = yypush_parse (ps);
@} while (status == YYPUSH_MORE);
yypstate_delete (ps);
@end example

That's it. Notice the next token is put into the global variable @code{yychar}
for use by the next invocation of the @code{yypush_parse} function.

Bison also supports both the push parser interface along with the pull parser
interface in the same generated parser.  In order to get this functionality,
you should replace the @samp{%define api.push-pull push} declaration with the
@samp{%define api.push-pull both} declaration.  Doing this will create all of
the symbols mentioned earlier along with the two extra symbols, @code{yyparse}
and @code{yypull_parse}.  @code{yyparse} can be used exactly as it normally
would be used.  However, the user should note that it is implemented in the
generated parser by calling @code{yypull_parse}.
This makes the @code{yyparse} function that is generated with the
@samp{%define api.push-pull both} declaration slower than the normal
@code{yyparse} function.  If the user
calls the @code{yypull_parse} function it will parse the rest of the input
stream.  It is possible to @code{yypush_parse} tokens to select a subgrammar
and then @code{yypull_parse} the rest of the input stream.  If you would like
to switch back and forth between between parsing styles, you would have to
write your own @code{yypull_parse} function that knows when to quit looking
for input.  An example of using the @code{yypull_parse} function would look
like this:

@example
yypstate *ps = yypstate_new ();
yypull_parse (ps); /* Will call the lexer */
yypstate_delete (ps);
@end example

Adding the @samp{%define api.pure} declaration does exactly the same thing to
the generated parser with @samp{%define api.push-pull both} as it did for
@samp{%define api.push-pull push}.

@node Decl Summary
@subsection Bison Declaration Summary
@cindex Bison declaration summary
@cindex declaration summary
@cindex summary, Bison declaration

Here is a summary of the declarations used to define a grammar:

@deffn {Directive} %union
Declare the collection of data types that semantic values may have
(@pxref{Union Decl, ,The Union Declaration}).
@end deffn

@deffn {Directive} %token
Declare a terminal symbol (token type name) with no precedence
or associativity specified (@pxref{Token Decl, ,Token Type Names}).
@end deffn

@deffn {Directive} %right
Declare a terminal symbol (token type name) that is right-associative
(@pxref{Precedence Decl, ,Operator Precedence}).
@end deffn

@deffn {Directive} %left
Declare a terminal symbol (token type name) that is left-associative
(@pxref{Precedence Decl, ,Operator Precedence}).
@end deffn

@deffn {Directive} %nonassoc
Declare a terminal symbol (token type name) that is nonassociative
(@pxref{Precedence Decl, ,Operator Precedence}).
Using it in a way that would be associative is a syntax error.
@end deffn

@ifset defaultprec
@deffn {Directive} %default-prec
Assign a precedence to rules lacking an explicit @code{%prec} modifier
(@pxref{Contextual Precedence, ,Context-Dependent Precedence}).
@end deffn
@end ifset

@deffn {Directive} %type
Declare the type of semantic values for a nonterminal symbol
(@pxref{Type Decl, ,Nonterminal Symbols}).
@end deffn

@deffn {Directive} %start
Specify the grammar's start symbol (@pxref{Start Decl, ,The
Start-Symbol}).
@end deffn

@deffn {Directive} %expect
Declare the expected number of shift-reduce conflicts
(@pxref{Expect Decl, ,Suppressing Conflict Warnings}).
@end deffn


@sp 1
@noindent
In order to change the behavior of @command{bison}, use the following
directives:

@deffn {Directive} %code @{@var{code}@}
@deffnx {Directive} %code @var{qualifier} @{@var{code}@}
@findex %code
Insert @var{code} verbatim into the output parser source at the
default location or at the location specified by @var{qualifier}.
@xref{%code Summary}.
@end deffn

@deffn {Directive} %debug
Instrument the parser for traces.  Obsoleted by @samp{%define
parse.trace}.
@xref{Tracing, ,Tracing Your Parser}.
@end deffn

@deffn {Directive} %define @var{variable}
@deffnx {Directive} %define @var{variable} @var{value}
@deffnx {Directive} %define @var{variable} "@var{value}"
Define a variable to adjust Bison's behavior.  @xref{%define Summary}.
@end deffn

@deffn {Directive} %defines
Write a parser header file containing macro definitions for the token
type names defined in the grammar as well as a few other declarations.
If the parser implementation file is named @file{@var{name}.c} then
the parser header file is named @file{@var{name}.h}.

For C parsers, the parser header file declares @code{YYSTYPE} unless
@code{YYSTYPE} is already defined as a macro or you have used a
@code{<@var{type}>} tag without using @code{%union}.  Therefore, if
you are using a @code{%union} (@pxref{Multiple Types, ,More Than One
Value Type}) with components that require other definitions, or if you
have defined a @code{YYSTYPE} macro or type definition (@pxref{Value
Type, ,Data Types of Semantic Values}), you need to arrange for these
definitions to be propagated to all modules, e.g., by putting them in
a prerequisite header that is included both by your parser and by any
other module that needs @code{YYSTYPE}.

Unless your parser is pure, the parser header file declares
@code{yylval} as an external variable.  @xref{Pure Decl, ,A Pure
(Reentrant) Parser}.

If you have also used locations, the parser header file declares
@code{YYLTYPE} and @code{yylloc} using a protocol similar to that of the
@code{YYSTYPE} macro and @code{yylval}.  @xref{Tracking Locations}.

This parser header file is normally essential if you wish to put the
definition of @code{yylex} in a separate source file, because
@code{yylex} typically needs to be able to refer to the
above-mentioned declarations and to the token type codes.  @xref{Token
Values, ,Semantic Values of Tokens}.

@findex %code requires
@findex %code provides
If you have declared @code{%code requires} or @code{%code provides}, the output
header also contains their code.
@xref{%code Summary}.

@cindex Header guard
The generated header is protected against multiple inclusions with a C
preprocessor guard: @samp{YY_@var{PREFIX}_@var{FILE}_INCLUDED}, where
@var{PREFIX} and @var{FILE} are the prefix (@pxref{Multiple Parsers,
,Multiple Parsers in the Same Program}) and generated file name turned
uppercase, with each series of non alphanumerical characters converted to a
single underscore.

For instance with @samp{%define api.prefix "calc"} and @samp{%defines
"lib/parse.h"}, the header will be guarded as follows.
@example
#ifndef YY_CALC_LIB_PARSE_H_INCLUDED
# define YY_CALC_LIB_PARSE_H_INCLUDED
...
#endif /* ! YY_CALC_LIB_PARSE_H_INCLUDED */
@end example
@end deffn

@deffn {Directive} %defines @var{defines-file}
Same as above, but save in the file @file{@var{defines-file}}.
@end deffn

@deffn {Directive} %destructor
Specify how the parser should reclaim the memory associated to
discarded symbols.  @xref{Destructor Decl, , Freeing Discarded Symbols}.
@end deffn

@deffn {Directive} %file-prefix "@var{prefix}"
Specify a prefix to use for all Bison output file names.  The names
are chosen as if the grammar file were named @file{@var{prefix}.y}.
@end deffn

@deffn {Directive} %language "@var{language}"
Specify the programming language for the generated parser.  Currently
supported languages include C, C++, and Java.
@var{language} is case-insensitive.

@end deffn

@deffn {Directive} %locations
Generate the code processing the locations (@pxref{Action Features,
,Special Features for Use in Actions}).  This mode is enabled as soon as
the grammar uses the special @samp{@@@var{n}} tokens, but if your
grammar does not use it, using @samp{%locations} allows for more
accurate syntax error messages.
@end deffn

@deffn {Directive} %name-prefix "@var{prefix}"
Rename the external symbols used in the parser so that they start with
@var{prefix} instead of @samp{yy}.  The precise list of symbols renamed
in C parsers
is @code{yyparse}, @code{yylex}, @code{yyerror}, @code{yynerrs},
@code{yylval}, @code{yychar}, @code{yydebug}, and
(if locations are used) @code{yylloc}.  If you use a push parser,
@code{yypush_parse}, @code{yypull_parse}, @code{yypstate},
@code{yypstate_new} and @code{yypstate_delete} will
also be renamed.  For example, if you use @samp{%name-prefix "c_"}, the
names become @code{c_parse}, @code{c_lex}, and so on.
For C++ parsers, see the @samp{%define api.namespace} documentation in this
section.
@xref{Multiple Parsers, ,Multiple Parsers in the Same Program}.
@end deffn

@ifset defaultprec
@deffn {Directive} %no-default-prec
Do not assign a precedence to rules lacking an explicit @code{%prec}
modifier (@pxref{Contextual Precedence, ,Context-Dependent
Precedence}).
@end deffn
@end ifset

@deffn {Directive} %no-lines
Don't generate any @code{#line} preprocessor commands in the parser
implementation file.  Ordinarily Bison writes these commands in the
parser implementation file so that the C compiler and debuggers will
associate errors and object code with your source file (the grammar
file).  This directive causes them to associate errors with the parser
implementation file, treating it as an independent source file in its
own right.
@end deffn

@deffn {Directive} %output "@var{file}"
Generate the parser implementation in @file{@var{file}}.
@end deffn

@deffn {Directive} %pure-parser
Deprecated version of @samp{%define api.pure} (@pxref{%define
Summary,,api.pure}), for which Bison is more careful to warn about
unreasonable usage.
@end deffn

@deffn {Directive} %require "@var{version}"
Require version @var{version} or higher of Bison.  @xref{Require Decl, ,
Require a Version of Bison}.
@end deffn

@deffn {Directive} %skeleton "@var{file}"
Specify the skeleton to use.

@c You probably don't need this option unless you are developing Bison.
@c You should use @code{%language} if you want to specify the skeleton for a
@c different language, because it is clearer and because it will always choose the
@c correct skeleton for non-deterministic or push parsers.

If @var{file} does not contain a @code{/}, @var{file} is the name of a skeleton
file in the Bison installation directory.
If it does, @var{file} is an absolute file name or a file name relative to the
directory of the grammar file.
This is similar to how most shells resolve commands.
@end deffn

@deffn {Directive} %token-table
Generate an array of token names in the parser implementation file.
The name of the array is @code{yytname}; @code{yytname[@var{i}]} is
the name of the token whose internal Bison token code number is
@var{i}.  The first three elements of @code{yytname} correspond to the
predefined tokens @code{"$end"}, @code{"error"}, and
@code{"$undefined"}; after these come the symbols defined in the
grammar file.

The name in the table includes all the characters needed to represent
the token in Bison.  For single-character literals and literal
strings, this includes the surrounding quoting characters and any
escape sequences.  For example, the Bison single-character literal
@code{'+'} corresponds to a three-character name, represented in C as
@code{"'+'"}; and the Bison two-character literal string @code{"\\/"}
corresponds to a five-character name, represented in C as
@code{"\"\\\\/\""}.

When you specify @code{%token-table}, Bison also generates macro
definitions for macros @code{YYNTOKENS}, @code{YYNNTS}, and
@code{YYNRULES}, and @code{YYNSTATES}:

@table @code
@item YYNTOKENS
The highest token number, plus one.
@item YYNNTS
The number of nonterminal symbols.
@item YYNRULES
The number of grammar rules,
@item YYNSTATES
The number of parser states (@pxref{Parser States}).
@end table
@end deffn

@deffn {Directive} %verbose
Write an extra output file containing verbose descriptions of the
parser states and what is done for each type of lookahead token in
that state.  @xref{Understanding, , Understanding Your Parser}, for more
information.
@end deffn

@deffn {Directive} %yacc
Pretend the option @option{--yacc} was given, i.e., imitate Yacc,
including its naming conventions.  @xref{Bison Options}, for more.
@end deffn


@node %define Summary
@subsection %define Summary

There are many features of Bison's behavior that can be controlled by
assigning the feature a single value.  For historical reasons, some
such features are assigned values by dedicated directives, such as
@code{%start}, which assigns the start symbol.  However, newer such
features are associated with variables, which are assigned by the
@code{%define} directive:

@deffn {Directive} %define @var{variable}
@deffnx {Directive} %define @var{variable} @var{value}
@deffnx {Directive} %define @var{variable} "@var{value}"
Define @var{variable} to @var{value}.

@var{value} must be placed in quotation marks if it contains any
character other than a letter, underscore, period, or non-initial dash
or digit.  Omitting @code{"@var{value}"} entirely is always equivalent
to specifying @code{""}.

It is an error if a @var{variable} is defined by @code{%define}
multiple times, but see @ref{Bison Options,,-D
@var{name}[=@var{value}]}.
@end deffn

The rest of this section summarizes variables and values that
@code{%define} accepts.

Some @var{variable}s take Boolean values.  In this case, Bison will
complain if the variable definition does not meet one of the following
four conditions:

@enumerate
@item @code{@var{value}} is @code{true}

@item @code{@var{value}} is omitted (or @code{""} is specified).
This is equivalent to @code{true}.

@item @code{@var{value}} is @code{false}.

@item @var{variable} is never defined.
In this case, Bison selects a default value.
@end enumerate

What @var{variable}s are accepted, as well as their meanings and default
values, depend on the selected target language and/or the parser
skeleton (@pxref{Decl Summary,,%language}, @pxref{Decl
Summary,,%skeleton}).
Unaccepted @var{variable}s produce an error.
Some of the accepted @var{variable}s are described below.

@c ================================================== api.namespace
@deffn Directive {%define api.namespace} @{@var{namespace}@}
@itemize
@item Languages(s): C++

@item Purpose: Specify the namespace for the parser class.
For example, if you specify:

@example
%define api.namespace @{foo::bar@}
@end example

Bison uses @code{foo::bar} verbatim in references such as:

@example
foo::bar::parser::semantic_type
@end example

However, to open a namespace, Bison removes any leading @code{::} and then
splits on any remaining occurrences:

@example
namespace foo @{ namespace bar @{
  class position;
  class location;
@} @}
@end example

@item Accepted Values:
Any absolute or relative C++ namespace reference without a trailing
@code{"::"}.  For example, @code{"foo"} or @code{"::foo::bar"}.

@item Default Value:
The value specified by @code{%name-prefix}, which defaults to @code{yy}.
This usage of @code{%name-prefix} is for backward compatibility and can
be confusing since @code{%name-prefix} also specifies the textual prefix
for the lexical analyzer function.  Thus, if you specify
@code{%name-prefix}, it is best to also specify @samp{%define
api.namespace} so that @code{%name-prefix} @emph{only} affects the
lexical analyzer function.  For example, if you specify:

@example
%define api.namespace @{foo@}
%name-prefix "bar::"
@end example

The parser namespace is @code{foo} and @code{yylex} is referenced as
@code{bar::lex}.
@end itemize
@end deffn
@c api.namespace

@c ================================================== api.location.type
@deffn {Directive} {%define api.location.type} @var{type}

@itemize @bullet
@item Language(s): C++, Java

@item Purpose: Define the location type.
@xref{User Defined Location Type}.

@item Accepted Values: String

@item Default Value: none

@item History:
Introduced in Bison 2.7 for C, C++ and Java.  Introduced under the name
@code{location_type} for C++ in Bison 2.5 and for Java in Bison 2.4.
@end itemize
@end deffn

@c ================================================== api.prefix
@deffn {Directive} {%define api.prefix} @var{prefix}

@itemize @bullet
@item Language(s): All

@item Purpose: Rename exported symbols.
@xref{Multiple Parsers, ,Multiple Parsers in the Same Program}.

@item Accepted Values: String

@item Default Value: @code{yy}

@item History: introduced in Bison 2.6
@end itemize
@end deffn

@c ================================================== api.pure
@deffn Directive {%define api.pure}

@itemize @bullet
@item Language(s): C

@item Purpose: Request a pure (reentrant) parser program.
@xref{Pure Decl, ,A Pure (Reentrant) Parser}.

@item Accepted Values: @code{true}, @code{false}, @code{full}

The value may be omitted: this is equivalent to specifying @code{true}, as is
the case for Boolean values.

When @code{%define api.pure full} is used, the parser is made reentrant. This
changes the signature for @code{yylex} (@pxref{Pure Calling}), and also that of
@code{yyerror} when the tracking of locations has been activated, as shown
below.

The @code{true} value is very similar to the @code{full} value, the only
difference is in the signature of @code{yyerror} on Yacc parsers without
@code{%parse-param}, for historical reasons.

I.e., if @samp{%locations %define api.pure} is passed then the prototypes for
@code{yyerror} are:

@example
void yyerror (char const *msg);                 // Yacc parsers.
void yyerror (YYLTYPE *locp, char const *msg);  // GLR parsers.
@end example

But if @samp{%locations %define api.pure %parse-param @{int *nastiness@}} is
used, then both parsers have the same signature:

@example
void yyerror (YYLTYPE *llocp, int *nastiness, char const *msg);
@end example

(@pxref{Error Reporting, ,The Error
Reporting Function @code{yyerror}})

@item Default Value: @code{false}

@item History:
the @code{full} value was introduced in Bison 2.7
@end itemize
@end deffn
@c api.pure



@c ================================================== api.push-pull
@deffn Directive {%define api.push-pull} @var{kind}

@itemize @bullet
@item Language(s): C (deterministic parsers only)

@item Purpose: Request a pull parser, a push parser, or both.
@xref{Push Decl, ,A Push Parser}.
(The current push parsing interface is experimental and may evolve.
More user feedback will help to stabilize it.)

@item Accepted Values: @code{pull}, @code{push}, @code{both}

@item Default Value: @code{pull}
@end itemize
@end deffn
@c api.push-pull



@c ================================================== api.token.constructor
@deffn Directive {%define api.token.constructor}

@itemize @bullet
@item Language(s):
C++

@item Purpose:
When variant-based semantic values are enabled (@pxref{C++ Variants}),
request that symbols be handled as a whole (type, value, and possibly
location) in the scanner.  @xref{Complete Symbols}, for details.

@item Accepted Values:
Boolean.

@item Default Value:
@code{false}
@item History:
introduced in Bison 2.8
@end itemize
@end deffn
@c api.token.constructor


@c ================================================== api.token.prefix
@deffn Directive {%define api.token.prefix} @var{prefix}

@itemize
@item Languages(s): all

@item Purpose:
Add a prefix to the token names when generating their definition in the
target language.  For instance

@example
%token FILE for ERROR
%define api.token.prefix "TOK_"
%%
start: FILE for ERROR;
@end example

@noindent
generates the definition of the symbols @code{TOK_FILE}, @code{TOK_for},
and @code{TOK_ERROR} in the generated source files.  In particular, the
scanner must use these prefixed token names, while the grammar itself
may still use the short names (as in the sample rule given above).  The
generated informational files (@file{*.output}, @file{*.xml},
@file{*.dot}) are not modified by this prefix.

Bison also prefixes the generated member names of the semantic value union.
@xref{Type Generation,, Generating the Semantic Value Type}, for more
details.

See @ref{Calc++ Parser} and @ref{Calc++ Scanner}, for a complete example.

@item Accepted Values:
Any string.  Should be a valid identifier prefix in the target language,
in other words, it should typically be an identifier itself (sequence of
letters, underscores, and ---not at the beginning--- digits).

@item Default Value:
empty
@item History:
introduced in Bison 2.8
@end itemize
@end deffn
@c api.token.prefix


@c ================================================== api.value.type
@deffn Directive {%define api.value.type} @var{type}
@itemize @bullet
@item Language(s):
all

@item Purpose:
The type for semantic values.

@item Accepted Values:
@table @asis
@item @code{""}
This grammar has no semantic value at all.  This is not properly supported
yet.
@item @code{%union} (C, C++)
The type is defined thanks to the @code{%union} directive.  You don't have
to define @code{api.value.type} in that case, using @code{%union} suffices.
@xref{Union Decl, ,The Union Declaration}.
For instance:
@example
%define api.value.type "%union"
%union
@{
  int ival;
  char *sval;
@}
%token <ival> INT "integer"
%token <sval> STR "string"
@end example

@item @code{union} (C, C++)
The symbols are defined with type names, from which Bison will generate a
@code{union}.  For instance:
@example
%define api.value.type "union"
%token <int> INT "integer"
%token <char *> STR "string"
@end example
This feature needs user feedback to stabilize.  Note that most C++ objects
cannot be stored in a @code{union}.

@item @code{variant} (C++)
This is similar to @code{union}, but special storage techniques are used to
allow any kind of C++ object to be used. For instance:
@example
%define api.value.type "variant"
%token <int> INT "integer"
%token <std::string> STR "string"
@end example
This feature needs user feedback to stabilize.
@xref{C++ Variants}.

@item any other identifier
Use this name as semantic value.
@example
%code requires
@{
  struct my_value
  @{
    enum
    @{
      is_int, is_str
    @} kind;
    union
    @{
      int ival;
      char *sval;
    @} u;
  @};
@}
%define api.value.type "struct my_value"
%token <u.ival> INT "integer"
%token <u.sval> STR "string"
@end example
@end table

@item Default Value:
@itemize @minus
@item
@code{%union} if @code{%union} is used, otherwise @dots{}
@item
@code{int} if type tags are used (i.e., @samp{%token <@var{type}>@dots{}} or
@samp{%token <@var{type}>@dots{}} is used), otherwise @dots{}
@item
@code{""}
@end itemize

@item History:
introduced in Bison 2.8.  Was introduced for Java only in 2.3b as
@code{stype}.
@end itemize
@end deffn
@c api.value.type


@c ================================================== location_type
@deffn Directive {%define location_type}
Obsoleted by @code{api.location.type} since Bison 2.7.
@end deffn


@c ================================================== lr.default-reduction

@deffn Directive {%define lr.default-reduction} @var{when}

@itemize @bullet
@item Language(s): all

@item Purpose: Specify the kind of states that are permitted to
contain default reductions.  @xref{Default Reductions}.  (The ability to
specify where default reductions should be used is experimental.  More user
feedback will help to stabilize it.)

@item Accepted Values: @code{most}, @code{consistent}, @code{accepting}
@item Default Value:
@itemize
@item @code{accepting} if @code{lr.type} is @code{canonical-lr}.
@item @code{most} otherwise.
@end itemize
@item History:
introduced as @code{lr.default-reduction} in 2.5, renamed as
@code{lr.default-reduction} in 2.8.
@end itemize
@end deffn

@c ============================================ lr.keep-unreachable-state

@deffn Directive {%define lr.keep-unreachable-state}

@itemize @bullet
@item Language(s): all
@item Purpose: Request that Bison allow unreachable parser states to
remain in the parser tables.  @xref{Unreachable States}.
@item Accepted Values: Boolean
@item Default Value: @code{false}
@item History:
introduced as @code{lr.keep_unreachable_states} in 2.3b, renamed as
@code{lr.keep-unreachable-states} in 2.5, and as
@code{lr.keep-unreachable-state} in 2.8.
@end itemize
@end deffn
@c lr.keep-unreachable-state

@c ================================================== lr.type

@deffn Directive {%define lr.type} @var{type}

@itemize @bullet
@item Language(s): all

@item Purpose: Specify the type of parser tables within the
LR(1) family.  @xref{LR Table Construction}.  (This feature is experimental.
More user feedback will help to stabilize it.)

@item Accepted Values: @code{lalr}, @code{ielr}, @code{canonical-lr}

@item Default Value: @code{lalr}
@end itemize
@end deffn

@c ================================================== namespace
@deffn Directive %define namespace @{@var{namespace}@}
Obsoleted by @code{api.namespace}
@c namespace
@end deffn

@c ================================================== parse.assert
@deffn Directive {%define parse.assert}

@itemize
@item Languages(s): C++

@item Purpose: Issue runtime assertions to catch invalid uses.
In C++, when variants are used (@pxref{C++ Variants}), symbols must be
constructed and
destroyed properly.  This option checks these constraints.

@item Accepted Values: Boolean

@item Default Value: @code{false}
@end itemize
@end deffn
@c parse.assert


@c ================================================== parse.error
@deffn Directive {%define parse.error}
@itemize
@item Languages(s):
all
@item Purpose:
Control the kind of error messages passed to the error reporting
function.  @xref{Error Reporting, ,The Error Reporting Function
@code{yyerror}}.
@item Accepted Values:
@itemize
@item @code{simple}
Error messages passed to @code{yyerror} are simply @w{@code{"syntax
error"}}.
@item @code{verbose}
Error messages report the unexpected token, and possibly the expected ones.
However, this report can often be incorrect when LAC is not enabled
(@pxref{LAC}).
@end itemize

@item Default Value:
@code{simple}
@end itemize
@end deffn
@c parse.error


@c ================================================== parse.lac
@deffn Directive {%define parse.lac}

@itemize
@item Languages(s): C (deterministic parsers only)

@item Purpose: Enable LAC (lookahead correction) to improve
syntax error handling.  @xref{LAC}.
@item Accepted Values: @code{none}, @code{full}
@item Default Value: @code{none}
@end itemize
@end deffn
@c parse.lac

@c ================================================== parse.trace
@deffn Directive {%define parse.trace}

@itemize
@item Languages(s): C, C++, Java

@item Purpose: Require parser instrumentation for tracing.
@xref{Tracing, ,Tracing Your Parser}.

In C/C++, define the macro @code{YYDEBUG} (or @code{@var{prefix}DEBUG} with
@samp{%define api.prefix @var{prefix}}), see @ref{Multiple Parsers,
,Multiple Parsers in the Same Program}) to 1 in the parser implementation
file if it is not already defined, so that the debugging facilities are
compiled.

@item Accepted Values: Boolean

@item Default Value: @code{false}
@end itemize
@end deffn
@c parse.trace

@node %code Summary
@subsection %code Summary
@findex %code
@cindex Prologue

The @code{%code} directive inserts code verbatim into the output
parser source at any of a predefined set of locations.  It thus serves
as a flexible and user-friendly alternative to the traditional Yacc
prologue, @code{%@{@var{code}%@}}.  This section summarizes the
functionality of @code{%code} for the various target languages
supported by Bison.  For a detailed discussion of how to use
@code{%code} in place of @code{%@{@var{code}%@}} for C/C++ and why it
is advantageous to do so, @pxref{Prologue Alternatives}.

@deffn {Directive} %code @{@var{code}@}
This is the unqualified form of the @code{%code} directive.  It
inserts @var{code} verbatim at a language-dependent default location
in the parser implementation.

For C/C++, the default location is the parser implementation file
after the usual contents of the parser header file.  Thus, the
unqualified form replaces @code{%@{@var{code}%@}} for most purposes.

For Java, the default location is inside the parser class.
@end deffn

@deffn {Directive} %code @var{qualifier} @{@var{code}@}
This is the qualified form of the @code{%code} directive.
@var{qualifier} identifies the purpose of @var{code} and thus the
location(s) where Bison should insert it.  That is, if you need to
specify location-sensitive @var{code} that does not belong at the
default location selected by the unqualified @code{%code} form, use
this form instead.
@end deffn

For any particular qualifier or for the unqualified form, if there are
multiple occurrences of the @code{%code} directive, Bison concatenates
the specified code in the order in which it appears in the grammar
file.

Not all qualifiers are accepted for all target languages.  Unaccepted
qualifiers produce an error.  Some of the accepted qualifiers are:

@table @code
@item requires
@findex %code requires

@itemize @bullet
@item Language(s): C, C++

@item Purpose: This is the best place to write dependency code required for
@code{YYSTYPE} and @code{YYLTYPE}.  In other words, it's the best place to
define types referenced in @code{%union} directives.  If you use
@code{#define} to override Bison's default @code{YYSTYPE} and @code{YYLTYPE}
definitions, then it is also the best place.  However you should rather
@code{%define} @code{api.value.type} and @code{api.location.type}.

@item Location(s): The parser header file and the parser implementation file
before the Bison-generated @code{YYSTYPE} and @code{YYLTYPE}
definitions.
@end itemize

@item provides
@findex %code provides

@itemize @bullet
@item Language(s): C, C++

@item Purpose: This is the best place to write additional definitions and
declarations that should be provided to other modules.

@item Location(s): The parser header file and the parser implementation
file after the Bison-generated @code{YYSTYPE}, @code{YYLTYPE}, and
token definitions.
@end itemize

@item top
@findex %code top

@itemize @bullet
@item Language(s): C, C++

@item Purpose: The unqualified @code{%code} or @code{%code requires}
should usually be more appropriate than @code{%code top}.  However,
occasionally it is necessary to insert code much nearer the top of the
parser implementation file.  For example:

@example
%code top @{
  #define _GNU_SOURCE
  #include <stdio.h>
@}
@end example

@item Location(s): Near the top of the parser implementation file.
@end itemize

@item imports
@findex %code imports

@itemize @bullet
@item Language(s): Java

@item Purpose: This is the best place to write Java import directives.

@item Location(s): The parser Java file after any Java package directive and
before any class definitions.
@end itemize
@end table

Though we say the insertion locations are language-dependent, they are
technically skeleton-dependent.  Writers of non-standard skeletons
however should choose their locations consistently with the behavior
of the standard Bison skeletons.


@node Multiple Parsers
@section Multiple Parsers in the Same Program

Most programs that use Bison parse only one language and therefore contain
only one Bison parser.  But what if you want to parse more than one language
with the same program?  Then you need to avoid name conflicts between
different definitions of functions and variables such as @code{yyparse},
@code{yylval}.  To use different parsers from the same compilation unit, you
also need to avoid conflicts on types and macros (e.g., @code{YYSTYPE})
exported in the generated header.

The easy way to do this is to define the @code{%define} variable
@code{api.prefix}.  With different @code{api.prefix}s it is guaranteed that
headers do not conflict when included together, and that compiled objects
can be linked together too.  Specifying @samp{%define api.prefix
@var{prefix}} (or passing the option @samp{-Dapi.prefix=@var{prefix}}, see
@ref{Invocation, ,Invoking Bison}) renames the interface functions and
variables of the Bison parser to start with @var{prefix} instead of
@samp{yy}, and all the macros to start by @var{PREFIX} (i.e., @var{prefix}
upper-cased) instead of @samp{YY}.

The renamed symbols include @code{yyparse}, @code{yylex}, @code{yyerror},
@code{yynerrs}, @code{yylval}, @code{yylloc}, @code{yychar} and
@code{yydebug}.  If you use a push parser, @code{yypush_parse},
@code{yypull_parse}, @code{yypstate}, @code{yypstate_new} and
@code{yypstate_delete} will also be renamed.  The renamed macros include
@code{YYSTYPE}, @code{YYLTYPE}, and @code{YYDEBUG}, which is treated
specifically --- more about this below.

For example, if you use @samp{%define api.prefix c}, the names become
@code{cparse}, @code{clex}, @dots{}, @code{CSTYPE}, @code{CLTYPE}, and so
on.

The @code{%define} variable @code{api.prefix} works in two different ways.
In the implementation file, it works by adding macro definitions to the
beginning of the parser implementation file, defining @code{yyparse} as
@code{@var{prefix}parse}, and so on:

@example
#define YYSTYPE CTYPE
#define yyparse cparse
#define yylval  clval
...
YYSTYPE yylval;
int yyparse (void);
@end example

This effectively substitutes one name for the other in the entire parser
implementation file, thus the ``original'' names (@code{yylex},
@code{YYSTYPE}, @dots{}) are also usable in the parser implementation file.

However, in the parser header file, the symbols are defined renamed, for
instance:

@example
extern CSTYPE clval;
int cparse (void);
@end example

The macro @code{YYDEBUG} is commonly used to enable the tracing support in
parsers.  To comply with this tradition, when @code{api.prefix} is used,
@code{YYDEBUG} (not renamed) is used as a default value:

@example
/* Debug traces.  */
#ifndef CDEBUG
# if defined YYDEBUG
#  if YYDEBUG
#   define CDEBUG 1
#  else
#   define CDEBUG 0
#  endif
# else
#  define CDEBUG 0
# endif
#endif
#if CDEBUG
extern int cdebug;
#endif
@end example

@sp 2

Prior to Bison 2.6, a feature similar to @code{api.prefix} was provided by
the obsolete directive @code{%name-prefix} (@pxref{Table of Symbols, ,Bison
Symbols}) and the option @code{--name-prefix} (@pxref{Bison Options}).

@node Interface
@chapter Parser C-Language Interface
@cindex C-language interface
@cindex interface

The Bison parser is actually a C function named @code{yyparse}.  Here we
describe the interface conventions of @code{yyparse} and the other
functions that it needs to use.

Keep in mind that the parser uses many C identifiers starting with
@samp{yy} and @samp{YY} for internal purposes.  If you use such an
identifier (aside from those in this manual) in an action or in epilogue
in the grammar file, you are likely to run into trouble.

@menu
* Parser Function::         How to call @code{yyparse} and what it returns.
* Push Parser Function::    How to call @code{yypush_parse} and what it returns.
* Pull Parser Function::    How to call @code{yypull_parse} and what it returns.
* Parser Create Function::  How to call @code{yypstate_new} and what it returns.
* Parser Delete Function::  How to call @code{yypstate_delete} and what it returns.
* Lexical::                 You must supply a function @code{yylex}
                              which reads tokens.
* Error Reporting::         You must supply a function @code{yyerror}.
* Action Features::         Special features for use in actions.
* Internationalization::    How to let the parser speak in the user's
                              native language.
@end menu

@node Parser Function
@section The Parser Function @code{yyparse}
@findex yyparse

You call the function @code{yyparse} to cause parsing to occur.  This
function reads tokens, executes actions, and ultimately returns when it
encounters end-of-input or an unrecoverable syntax error.  You can also
write an action which directs @code{yyparse} to return immediately
without reading further.


@deftypefun int yyparse (void)
The value returned by @code{yyparse} is 0 if parsing was successful (return
is due to end-of-input).

The value is 1 if parsing failed because of invalid input, i.e., input
that contains a syntax error or that causes @code{YYABORT} to be
invoked.

The value is 2 if parsing failed due to memory exhaustion.
@end deftypefun

In an action, you can cause immediate return from @code{yyparse} by using
these macros:

@defmac YYACCEPT
@findex YYACCEPT
Return immediately with value 0 (to report success).
@end defmac

@defmac YYABORT
@findex YYABORT
Return immediately with value 1 (to report failure).
@end defmac

If you use a reentrant parser, you can optionally pass additional
parameter information to it in a reentrant way.  To do so, use the
declaration @code{%parse-param}:

@deffn {Directive} %parse-param @{@var{argument-declaration}@} @dots{}
@findex %parse-param
Declare that one or more
@var{argument-declaration} are additional @code{yyparse} arguments.
The @var{argument-declaration} is used when declaring
functions or prototypes.  The last identifier in
@var{argument-declaration} must be the argument name.
@end deffn

Here's an example.  Write this in the parser:

@example
%parse-param @{int *nastiness@} @{int *randomness@}
@end example

@noindent
Then call the parser like this:

@example
@{
  int nastiness, randomness;
  @dots{}  /* @r{Store proper data in @code{nastiness} and @code{randomness}.}  */
  value = yyparse (&nastiness, &randomness);
  @dots{}
@}
@end example

@noindent
In the grammar actions, use expressions like this to refer to the data:

@example
exp: @dots{}    @{ @dots{}; *randomness += 1; @dots{} @}
@end example

@noindent
Using the following:
@example
%parse-param @{int *randomness@}
@end example

Results in these signatures:
@example
void yyerror (int *randomness, const char *msg);
int  yyparse (int *randomness);
@end example

@noindent
Or, if both @code{%define api.pure full} (or just @code{%define api.pure})
and @code{%locations} are used:

@example
void yyerror (YYLTYPE *llocp, int *randomness, const char *msg);
int  yyparse (int *randomness);
@end example

@node Push Parser Function
@section The Push Parser Function @code{yypush_parse}
@findex yypush_parse

(The current push parsing interface is experimental and may evolve.
More user feedback will help to stabilize it.)

You call the function @code{yypush_parse} to parse a single token.  This
function is available if either the @samp{%define api.push-pull push} or
@samp{%define api.push-pull both} declaration is used.
@xref{Push Decl, ,A Push Parser}.

@deftypefun int yypush_parse (yypstate *@var{yyps})
The value returned by @code{yypush_parse} is the same as for yyparse with
the following exception: it returns @code{YYPUSH_MORE} if more input is
required to finish parsing the grammar.
@end deftypefun

@node Pull Parser Function
@section The Pull Parser Function @code{yypull_parse}
@findex yypull_parse

(The current push parsing interface is experimental and may evolve.
More user feedback will help to stabilize it.)

You call the function @code{yypull_parse} to parse the rest of the input
stream.  This function is available if the @samp{%define api.push-pull both}
declaration is used.
@xref{Push Decl, ,A Push Parser}.

@deftypefun int yypull_parse (yypstate *@var{yyps})
The value returned by @code{yypull_parse} is the same as for @code{yyparse}.
@end deftypefun

@node Parser Create Function
@section The Parser Create Function @code{yystate_new}
@findex yypstate_new

(The current push parsing interface is experimental and may evolve.
More user feedback will help to stabilize it.)

You call the function @code{yypstate_new} to create a new parser instance.
This function is available if either the @samp{%define api.push-pull push} or
@samp{%define api.push-pull both} declaration is used.
@xref{Push Decl, ,A Push Parser}.

@deftypefun {yypstate*} yypstate_new (void)
The function will return a valid parser instance if there was memory available
or 0 if no memory was available.
In impure mode, it will also return 0 if a parser instance is currently
allocated.
@end deftypefun

@node Parser Delete Function
@section The Parser Delete Function @code{yystate_delete}
@findex yypstate_delete

(The current push parsing interface is experimental and may evolve.
More user feedback will help to stabilize it.)

You call the function @code{yypstate_delete} to delete a parser instance.
function is available if either the @samp{%define api.push-pull push} or
@samp{%define api.push-pull both} declaration is used.
@xref{Push Decl, ,A Push Parser}.

@deftypefun void yypstate_delete (yypstate *@var{yyps})
This function will reclaim the memory associated with a parser instance.
After this call, you should no longer attempt to use the parser instance.
@end deftypefun

@node Lexical
@section The Lexical Analyzer Function @code{yylex}
@findex yylex
@cindex lexical analyzer

The @dfn{lexical analyzer} function, @code{yylex}, recognizes tokens from
the input stream and returns them to the parser.  Bison does not create
this function automatically; you must write it so that @code{yyparse} can
call it.  The function is sometimes referred to as a lexical scanner.

In simple programs, @code{yylex} is often defined at the end of the
Bison grammar file.  If @code{yylex} is defined in a separate source
file, you need to arrange for the token-type macro definitions to be
available there.  To do this, use the @samp{-d} option when you run
Bison, so that it will write these macro definitions into the separate
parser header file, @file{@var{name}.tab.h}, which you can include in
the other source files that need it.  @xref{Invocation, ,Invoking
Bison}.

@menu
* Calling Convention::  How @code{yyparse} calls @code{yylex}.
* Token Values::        How @code{yylex} must return the semantic value
                          of the token it has read.
* Token Locations::     How @code{yylex} must return the text location
                          (line number, etc.) of the token, if the
                          actions want that.
* Pure Calling::        How the calling convention differs in a pure parser
                          (@pxref{Pure Decl, ,A Pure (Reentrant) Parser}).
@end menu

@node Calling Convention
@subsection Calling Convention for @code{yylex}

The value that @code{yylex} returns must be the positive numeric code
for the type of token it has just found; a zero or negative value
signifies end-of-input.

When a token is referred to in the grammar rules by a name, that name
in the parser implementation file becomes a C macro whose definition
is the proper numeric code for that token type.  So @code{yylex} can
use the name to indicate that type.  @xref{Symbols}.

When a token is referred to in the grammar rules by a character literal,
the numeric code for that character is also the code for the token type.
So @code{yylex} can simply return that character code, possibly converted
to @code{unsigned char} to avoid sign-extension.  The null character
must not be used this way, because its code is zero and that
signifies end-of-input.

Here is an example showing these things:

@example
int
yylex (void)
@{
  @dots{}
  if (c == EOF)    /* Detect end-of-input.  */
    return 0;
  @dots{}
  if (c == '+' || c == '-')
    return c;      /* Assume token type for '+' is '+'.  */
  @dots{}
  return INT;      /* Return the type of the token.  */
  @dots{}
@}
@end example

@noindent
This interface has been designed so that the output from the @code{lex}
utility can be used without change as the definition of @code{yylex}.

If the grammar uses literal string tokens, there are two ways that
@code{yylex} can determine the token type codes for them:

@itemize @bullet
@item
If the grammar defines symbolic token names as aliases for the
literal string tokens, @code{yylex} can use these symbolic names like
all others.  In this case, the use of the literal string tokens in
the grammar file has no effect on @code{yylex}.

@item
@code{yylex} can find the multicharacter token in the @code{yytname}
table.  The index of the token in the table is the token type's code.
The name of a multicharacter token is recorded in @code{yytname} with a
double-quote, the token's characters, and another double-quote.  The
token's characters are escaped as necessary to be suitable as input
to Bison.

Here's code for looking up a multicharacter token in @code{yytname},
assuming that the characters of the token are stored in
@code{token_buffer}, and assuming that the token does not contain any
characters like @samp{"} that require escaping.

@example
for (i = 0; i < YYNTOKENS; i++)
  @{
    if (yytname[i] != 0
        && yytname[i][0] == '"'
        && ! strncmp (yytname[i] + 1, token_buffer,
                      strlen (token_buffer))
        && yytname[i][strlen (token_buffer) + 1] == '"'
        && yytname[i][strlen (token_buffer) + 2] == 0)
      break;
  @}
@end example

The @code{yytname} table is generated only if you use the
@code{%token-table} declaration.  @xref{Decl Summary}.
@end itemize

@node Token Values
@subsection Semantic Values of Tokens

@vindex yylval
In an ordinary (nonreentrant) parser, the semantic value of the token must
be stored into the global variable @code{yylval}.  When you are using
just one data type for semantic values, @code{yylval} has that type.
Thus, if the type is @code{int} (the default), you might write this in
@code{yylex}:

@example
@group
  @dots{}
  yylval = value;  /* Put value onto Bison stack.  */
  return INT;      /* Return the type of the token.  */
  @dots{}
@end group
@end example

When you are using multiple data types, @code{yylval}'s type is a union
made from the @code{%union} declaration (@pxref{Union Decl, ,The
Union Declaration}).  So when you store a token's value, you
must use the proper member of the union.  If the @code{%union}
declaration looks like this:

@example
@group
%union @{
  int intval;
  double val;
  symrec *tptr;
@}
@end group
@end example

@noindent
then the code in @code{yylex} might look like this:

@example
@group
  @dots{}
  yylval.intval = value; /* Put value onto Bison stack.  */
  return INT;            /* Return the type of the token.  */
  @dots{}
@end group
@end example

@node Token Locations
@subsection Textual Locations of Tokens

@vindex yylloc
If you are using the @samp{@@@var{n}}-feature (@pxref{Tracking Locations})
in actions to keep track of the textual locations of tokens and groupings,
then you must provide this information in @code{yylex}.  The function
@code{yyparse} expects to find the textual location of a token just parsed
in the global variable @code{yylloc}.  So @code{yylex} must store the proper
data in that variable.

By default, the value of @code{yylloc} is a structure and you need only
initialize the members that are going to be used by the actions.  The
four members are called @code{first_line}, @code{first_column},
@code{last_line} and @code{last_column}.  Note that the use of this
feature makes the parser noticeably slower.

@tindex YYLTYPE
The data type of @code{yylloc} has the name @code{YYLTYPE}.

@node Pure Calling
@subsection Calling Conventions for Pure Parsers

When you use the Bison declaration @code{%define api.pure full} to request a
pure, reentrant parser, the global communication variables @code{yylval}
and @code{yylloc} cannot be used.  (@xref{Pure Decl, ,A Pure (Reentrant)
Parser}.)  In such parsers the two global variables are replaced by
pointers passed as arguments to @code{yylex}.  You must declare them as
shown here, and pass the information back by storing it through those
pointers.

@example
int
yylex (YYSTYPE *lvalp, YYLTYPE *llocp)
@{
  @dots{}
  *lvalp = value;  /* Put value onto Bison stack.  */
  return INT;      /* Return the type of the token.  */
  @dots{}
@}
@end example

If the grammar file does not use the @samp{@@} constructs to refer to
textual locations, then the type @code{YYLTYPE} will not be defined.  In
this case, omit the second argument; @code{yylex} will be called with
only one argument.

If you wish to pass additional arguments to @code{yylex}, use
@code{%lex-param} just like @code{%parse-param} (@pxref{Parser
Function}).  To pass additional arguments to both @code{yylex} and
@code{yyparse}, use @code{%param}.

@deffn {Directive} %lex-param @{@var{argument-declaration}@} @dots{}
@findex %lex-param
Specify that @var{argument-declaration} are additional @code{yylex} argument
declarations.  You may pass one or more such declarations, which is
equivalent to repeating @code{%lex-param}.
@end deffn

@deffn {Directive} %param @{@var{argument-declaration}@} @dots{}
@findex %param
Specify that @var{argument-declaration} are additional
@code{yylex}/@code{yyparse} argument declaration.  This is equivalent to
@samp{%lex-param @{@var{argument-declaration}@} @dots{} %parse-param
@{@var{argument-declaration}@} @dots{}}.  You may pass one or more
declarations, which is equivalent to repeating @code{%param}.
@end deffn

@noindent
For instance:

@example
%lex-param   @{scanner_mode *mode@}
%parse-param @{parser_mode *mode@}
%param       @{environment_type *env@}
@end example

@noindent
results in the following signatures:

@example
int yylex   (scanner_mode *mode, environment_type *env);
int yyparse (parser_mode *mode, environment_type *env);
@end example

If @samp{%define api.pure full} is added:

@example
int yylex   (YYSTYPE *lvalp, scanner_mode *mode, environment_type *env);
int yyparse (parser_mode *mode, environment_type *env);
@end example

@noindent
and finally, if both @samp{%define api.pure full} and @code{%locations} are
used:

@example
int yylex   (YYSTYPE *lvalp, YYLTYPE *llocp,
             scanner_mode *mode, environment_type *env);
int yyparse (parser_mode *mode, environment_type *env);
@end example

@node Error Reporting
@section The Error Reporting Function @code{yyerror}
@cindex error reporting function
@findex yyerror
@cindex parse error
@cindex syntax error

The Bison parser detects a @dfn{syntax error} (or @dfn{parse error})
whenever it reads a token which cannot satisfy any syntax rule.  An
action in the grammar can also explicitly proclaim an error, using the
macro @code{YYERROR} (@pxref{Action Features, ,Special Features for Use
in Actions}).

The Bison parser expects to report the error by calling an error
reporting function named @code{yyerror}, which you must supply.  It is
called by @code{yyparse} whenever a syntax error is found, and it
receives one argument.  For a syntax error, the string is normally
@w{@code{"syntax error"}}.

@findex %define parse.error
If you invoke @samp{%define parse.error verbose} in the Bison declarations
section (@pxref{Bison Declarations, ,The Bison Declarations Section}), then
Bison provides a more verbose and specific error message string instead of
just plain @w{@code{"syntax error"}}.  However, that message sometimes
contains incorrect information if LAC is not enabled (@pxref{LAC}).

The parser can detect one other kind of error: memory exhaustion.  This
can happen when the input contains constructions that are very deeply
nested.  It isn't likely you will encounter this, since the Bison
parser normally extends its stack automatically up to a very large limit.  But
if memory is exhausted, @code{yyparse} calls @code{yyerror} in the usual
fashion, except that the argument string is @w{@code{"memory exhausted"}}.

In some cases diagnostics like @w{@code{"syntax error"}} are
translated automatically from English to some other language before
they are passed to @code{yyerror}.  @xref{Internationalization}.

The following definition suffices in simple programs:

@example
@group
void
yyerror (char const *s)
@{
@end group
@group
  fprintf (stderr, "%s\n", s);
@}
@end group
@end example

After @code{yyerror} returns to @code{yyparse}, the latter will attempt
error recovery if you have written suitable error recovery grammar rules
(@pxref{Error Recovery}).  If recovery is impossible, @code{yyparse} will
immediately return 1.

Obviously, in location tracking pure parsers, @code{yyerror} should have
an access to the current location. With @code{%define api.pure}, this is
indeed the case for the GLR parsers, but not for the Yacc parser, for
historical reasons, and this is the why @code{%define api.pure full} should be
prefered over @code{%define api.pure}.

When @code{%locations %define api.pure full} is used, @code{yyerror} has the
following signature:

@example
void yyerror (YYLTYPE *locp, char const *msg);
@end example

@noindent
The prototypes are only indications of how the code produced by Bison
uses @code{yyerror}.  Bison-generated code always ignores the returned
value, so @code{yyerror} can return any type, including @code{void}.
Also, @code{yyerror} can be a variadic function; that is why the
message is always passed last.

Traditionally @code{yyerror} returns an @code{int} that is always
ignored, but this is purely for historical reasons, and @code{void} is
preferable since it more accurately describes the return type for
@code{yyerror}.

@vindex yynerrs
The variable @code{yynerrs} contains the number of syntax errors
reported so far.  Normally this variable is global; but if you
request a pure parser (@pxref{Pure Decl, ,A Pure (Reentrant) Parser})
then it is a local variable which only the actions can access.

@node Action Features
@section Special Features for Use in Actions
@cindex summary, action features
@cindex action features summary

Here is a table of Bison constructs, variables and macros that
are useful in actions.

@deffn {Variable} $$
Acts like a variable that contains the semantic value for the
grouping made by the current rule.  @xref{Actions}.
@end deffn

@deffn {Variable} $@var{n}
Acts like a variable that contains the semantic value for the
@var{n}th component of the current rule.  @xref{Actions}.
@end deffn

@deffn {Variable} $<@var{typealt}>$
Like @code{$$} but specifies alternative @var{typealt} in the union
specified by the @code{%union} declaration.  @xref{Action Types, ,Data
Types of Values in Actions}.
@end deffn

@deffn {Variable} $<@var{typealt}>@var{n}
Like @code{$@var{n}} but specifies alternative @var{typealt} in the
union specified by the @code{%union} declaration.
@xref{Action Types, ,Data Types of Values in Actions}.
@end deffn

@deffn {Macro} YYABORT @code{;}
Return immediately from @code{yyparse}, indicating failure.
@xref{Parser Function, ,The Parser Function @code{yyparse}}.
@end deffn

@deffn {Macro} YYACCEPT @code{;}
Return immediately from @code{yyparse}, indicating success.
@xref{Parser Function, ,The Parser Function @code{yyparse}}.
@end deffn

@deffn {Macro} YYBACKUP (@var{token}, @var{value})@code{;}
@findex YYBACKUP
Unshift a token.  This macro is allowed only for rules that reduce
a single value, and only when there is no lookahead token.
It is also disallowed in GLR parsers.
It installs a lookahead token with token type @var{token} and
semantic value @var{value}; then it discards the value that was
going to be reduced by this rule.

If the macro is used when it is not valid, such as when there is
a lookahead token already, then it reports a syntax error with
a message @samp{cannot back up} and performs ordinary error
recovery.

In either case, the rest of the action is not executed.
@end deffn

@deffn {Macro} YYEMPTY
Value stored in @code{yychar} when there is no lookahead token.
@end deffn

@deffn {Macro} YYEOF
Value stored in @code{yychar} when the lookahead is the end of the input
stream.
@end deffn

@deffn {Macro} YYERROR @code{;}
Cause an immediate syntax error.  This statement initiates error
recovery just as if the parser itself had detected an error; however, it
does not call @code{yyerror}, and does not print any message.  If you
want to print an error message, call @code{yyerror} explicitly before
the @samp{YYERROR;} statement.  @xref{Error Recovery}.
@end deffn

@deffn {Macro} YYRECOVERING
@findex YYRECOVERING
The expression @code{YYRECOVERING ()} yields 1 when the parser
is recovering from a syntax error, and 0 otherwise.
@xref{Error Recovery}.
@end deffn

@deffn {Variable} yychar
Variable containing either the lookahead token, or @code{YYEOF} when the
lookahead is the end of the input stream, or @code{YYEMPTY} when no lookahead
has been performed so the next token is not yet known.
Do not modify @code{yychar} in a deferred semantic action (@pxref{GLR Semantic
Actions}).
@xref{Lookahead, ,Lookahead Tokens}.
@end deffn

@deffn {Macro} yyclearin @code{;}
Discard the current lookahead token.  This is useful primarily in
error rules.
Do not invoke @code{yyclearin} in a deferred semantic action (@pxref{GLR
Semantic Actions}).
@xref{Error Recovery}.
@end deffn

@deffn {Macro} yyerrok @code{;}
Resume generating error messages immediately for subsequent syntax
errors.  This is useful primarily in error rules.
@xref{Error Recovery}.
@end deffn

@deffn {Variable} yylloc
Variable containing the lookahead token location when @code{yychar} is not set
to @code{YYEMPTY} or @code{YYEOF}.
Do not modify @code{yylloc} in a deferred semantic action (@pxref{GLR Semantic
Actions}).
@xref{Actions and Locations, ,Actions and Locations}.
@end deffn

@deffn {Variable} yylval
Variable containing the lookahead token semantic value when @code{yychar} is
not set to @code{YYEMPTY} or @code{YYEOF}.
Do not modify @code{yylval} in a deferred semantic action (@pxref{GLR Semantic
Actions}).
@xref{Actions, ,Actions}.
@end deffn

@deffn {Value} @@$
Acts like a structure variable containing information on the textual
location of the grouping made by the current rule.  @xref{Tracking
Locations}.

@c Check if those paragraphs are still useful or not.

@c @example
@c struct @{
@c   int first_line, last_line;
@c   int first_column, last_column;
@c @};
@c @end example

@c Thus, to get the starting line number of the third component, you would
@c use @samp{@@3.first_line}.

@c In order for the members of this structure to contain valid information,
@c you must make @code{yylex} supply this information about each token.
@c If you need only certain members, then @code{yylex} need only fill in
@c those members.

@c The use of this feature makes the parser noticeably slower.
@end deffn

@deffn {Value} @@@var{n}
@findex @@@var{n}
Acts like a structure variable containing information on the textual
location of the @var{n}th component of the current rule.  @xref{Tracking
Locations}.
@end deffn

@node Internationalization
@section Parser Internationalization
@cindex internationalization
@cindex i18n
@cindex NLS
@cindex gettext
@cindex bison-po

A Bison-generated parser can print diagnostics, including error and
tracing messages.  By default, they appear in English.  However, Bison
also supports outputting diagnostics in the user's native language.  To
make this work, the user should set the usual environment variables.
@xref{Users, , The User's View, gettext, GNU @code{gettext} utilities}.
For example, the shell command @samp{export LC_ALL=fr_CA.UTF-8} might
set the user's locale to French Canadian using the UTF-8
encoding.  The exact set of available locales depends on the user's
installation.

The maintainer of a package that uses a Bison-generated parser enables
the internationalization of the parser's output through the following
steps.  Here we assume a package that uses GNU Autoconf and
GNU Automake.

@enumerate
@item
@cindex bison-i18n.m4
Into the directory containing the GNU Autoconf macros used
by the package ---often called @file{m4}--- copy the
@file{bison-i18n.m4} file installed by Bison under
@samp{share/aclocal/bison-i18n.m4} in Bison's installation directory.
For example:

@example
cp /usr/local/share/aclocal/bison-i18n.m4 m4/bison-i18n.m4
@end example

@item
@findex BISON_I18N
@vindex BISON_LOCALEDIR
@vindex YYENABLE_NLS
In the top-level @file{configure.ac}, after the @code{AM_GNU_GETTEXT}
invocation, add an invocation of @code{BISON_I18N}.  This macro is
defined in the file @file{bison-i18n.m4} that you copied earlier.  It
causes @samp{configure} to find the value of the
@code{BISON_LOCALEDIR} variable, and it defines the source-language
symbol @code{YYENABLE_NLS} to enable translations in the
Bison-generated parser.

@item
In the @code{main} function of your program, designate the directory
containing Bison's runtime message catalog, through a call to
@samp{bindtextdomain} with domain name @samp{bison-runtime}.
For example:

@example
bindtextdomain ("bison-runtime", BISON_LOCALEDIR);
@end example

Typically this appears after any other call @code{bindtextdomain
(PACKAGE, LOCALEDIR)} that your package already has.  Here we rely on
@samp{BISON_LOCALEDIR} to be defined as a string through the
@file{Makefile}.

@item
In the @file{Makefile.am} that controls the compilation of the @code{main}
function, make @samp{BISON_LOCALEDIR} available as a C preprocessor macro,
either in @samp{DEFS} or in @samp{AM_CPPFLAGS}.  For example:

@example
DEFS = @@DEFS@@ -DBISON_LOCALEDIR='"$(BISON_LOCALEDIR)"'
@end example

or:

@example
AM_CPPFLAGS = -DBISON_LOCALEDIR='"$(BISON_LOCALEDIR)"'
@end example

@item
Finally, invoke the command @command{autoreconf} to generate the build
infrastructure.
@end enumerate


@node Algorithm
@chapter The Bison Parser Algorithm
@cindex Bison parser algorithm
@cindex algorithm of parser
@cindex shifting
@cindex reduction
@cindex parser stack
@cindex stack, parser

As Bison reads tokens, it pushes them onto a stack along with their
semantic values.  The stack is called the @dfn{parser stack}.  Pushing a
token is traditionally called @dfn{shifting}.

For example, suppose the infix calculator has read @samp{1 + 5 *}, with a
@samp{3} to come.  The stack will have four elements, one for each token
that was shifted.

But the stack does not always have an element for each token read.  When
the last @var{n} tokens and groupings shifted match the components of a
grammar rule, they can be combined according to that rule.  This is called
@dfn{reduction}.  Those tokens and groupings are replaced on the stack by a
single grouping whose symbol is the result (left hand side) of that rule.
Running the rule's action is part of the process of reduction, because this
is what computes the semantic value of the resulting grouping.

For example, if the infix calculator's parser stack contains this:

@example
1 + 5 * 3
@end example

@noindent
and the next input token is a newline character, then the last three
elements can be reduced to 15 via the rule:

@example
expr: expr '*' expr;
@end example

@noindent
Then the stack contains just these three elements:

@example
1 + 15
@end example

@noindent
At this point, another reduction can be made, resulting in the single value
16.  Then the newline token can be shifted.

The parser tries, by shifts and reductions, to reduce the entire input down
to a single grouping whose symbol is the grammar's start-symbol
(@pxref{Language and Grammar, ,Languages and Context-Free Grammars}).

This kind of parser is known in the literature as a bottom-up parser.

@menu
* Lookahead::         Parser looks one token ahead when deciding what to do.
* Shift/Reduce::      Conflicts: when either shifting or reduction is valid.
* Precedence::        Operator precedence works by resolving conflicts.
* Contextual Precedence::  When an operator's precedence depends on context.
* Parser States::     The parser is a finite-state-machine with stack.
* Reduce/Reduce::     When two rules are applicable in the same situation.
* Mysterious Conflicts:: Conflicts that look unjustified.
* Tuning LR::         How to tune fundamental aspects of LR-based parsing.
* Generalized LR Parsing::  Parsing arbitrary context-free grammars.
* Memory Management:: What happens when memory is exhausted.  How to avoid it.
@end menu

@node Lookahead
@section Lookahead Tokens
@cindex lookahead token

The Bison parser does @emph{not} always reduce immediately as soon as the
last @var{n} tokens and groupings match a rule.  This is because such a
simple strategy is inadequate to handle most languages.  Instead, when a
reduction is possible, the parser sometimes ``looks ahead'' at the next
token in order to decide what to do.

When a token is read, it is not immediately shifted; first it becomes the
@dfn{lookahead token}, which is not on the stack.  Now the parser can
perform one or more reductions of tokens and groupings on the stack, while
the lookahead token remains off to the side.  When no more reductions
should take place, the lookahead token is shifted onto the stack.  This
does not mean that all possible reductions have been done; depending on the
token type of the lookahead token, some rules may choose to delay their
application.

Here is a simple case where lookahead is needed.  These three rules define
expressions which contain binary addition operators and postfix unary
factorial operators (@samp{!}), and allow parentheses for grouping.

@example
@group
expr:
  term '+' expr
| term
;
@end group

@group
term:
  '(' expr ')'
| term '!'
| "number"
;
@end group
@end example

Suppose that the tokens @w{@samp{1 + 2}} have been read and shifted; what
should be done?  If the following token is @samp{)}, then the first three
tokens must be reduced to form an @code{expr}.  This is the only valid
course, because shifting the @samp{)} would produce a sequence of symbols
@w{@code{term ')'}}, and no rule allows this.

If the following token is @samp{!}, then it must be shifted immediately so
that @w{@samp{2 !}} can be reduced to make a @code{term}.  If instead the
parser were to reduce before shifting, @w{@samp{1 + 2}} would become an
@code{expr}.  It would then be impossible to shift the @samp{!} because
doing so would produce on the stack the sequence of symbols @code{expr
'!'}.  No rule allows that sequence.

@vindex yychar
@vindex yylval
@vindex yylloc
The lookahead token is stored in the variable @code{yychar}.
Its semantic value and location, if any, are stored in the variables
@code{yylval} and @code{yylloc}.
@xref{Action Features, ,Special Features for Use in Actions}.

@node Shift/Reduce
@section Shift/Reduce Conflicts
@cindex conflicts
@cindex shift/reduce conflicts
@cindex dangling @code{else}
@cindex @code{else}, dangling

Suppose we are parsing a language which has if-then and if-then-else
statements, with a pair of rules like this:

@example
@group
if_stmt:
  "if" expr "then" stmt
| "if" expr "then" stmt "else" stmt
;
@end group
@end example

@noindent
Here @code{"if"}, @code{"then"} and @code{"else"} are terminal symbols for
specific keyword tokens.

When the @code{"else"} token is read and becomes the lookahead token, the
contents of the stack (assuming the input is valid) are just right for
reduction by the first rule.  But it is also legitimate to shift the
@code{"else"}, because that would lead to eventual reduction by the second
rule.

This situation, where either a shift or a reduction would be valid, is
called a @dfn{shift/reduce conflict}.  Bison is designed to resolve
these conflicts by choosing to shift, unless otherwise directed by
operator precedence declarations.  To see the reason for this, let's
contrast it with the other alternative.

Since the parser prefers to shift the @code{"else"}, the result is to attach
the else-clause to the innermost if-statement, making these two inputs
equivalent:

@example
if x then if y then win; else lose;

if x then do; if y then win; else lose; end;
@end example

But if the parser chose to reduce when possible rather than shift, the
result would be to attach the else-clause to the outermost if-statement,
making these two inputs equivalent:

@example
if x then if y then win; else lose;

if x then do; if y then win; end; else lose;
@end example

The conflict exists because the grammar as written is ambiguous: either
parsing of the simple nested if-statement is legitimate.  The established
convention is that these ambiguities are resolved by attaching the
else-clause to the innermost if-statement; this is what Bison accomplishes
by choosing to shift rather than reduce.  (It would ideally be cleaner to
write an unambiguous grammar, but that is very hard to do in this case.)
This particular ambiguity was first encountered in the specifications of
Algol 60 and is called the ``dangling @code{else}'' ambiguity.

To avoid warnings from Bison about predictable, legitimate shift/reduce
conflicts, you can use the @code{%expect @var{n}} declaration.
There will be no warning as long as the number of shift/reduce conflicts
is exactly @var{n}, and Bison will report an error if there is a
different number.
@xref{Expect Decl, ,Suppressing Conflict Warnings}.  However, we don't
recommend the use of @code{%expect} (except @samp{%expect 0}!), as an equal
number of conflicts does not mean that they are the @emph{same}.  When
possible, you should rather use precedence directives to @emph{fix} the
conflicts explicitly (@pxref{Non Operators,, Using Precedence For Non
Operators}).

The definition of @code{if_stmt} above is solely to blame for the
conflict, but the conflict does not actually appear without additional
rules.  Here is a complete Bison grammar file that actually manifests
the conflict:

@example
%%
@group
stmt:
  expr
| if_stmt
;
@end group

@group
if_stmt:
  "if" expr "then" stmt
| "if" expr "then" stmt "else" stmt
;
@end group

expr:
  "identifier"
;
@end example

@node Precedence
@section Operator Precedence
@cindex operator precedence
@cindex precedence of operators

Another situation where shift/reduce conflicts appear is in arithmetic
expressions.  Here shifting is not always the preferred resolution; the
Bison declarations for operator precedence allow you to specify when to
shift and when to reduce.

@menu
* Why Precedence::    An example showing why precedence is needed.
* Using Precedence::  How to specify precedence and associativity.
* Precedence Only::   How to specify precedence only.
* Precedence Examples::  How these features are used in the previous example.
* How Precedence::    How they work.
* Non Operators::     Using precedence for general conflicts.
@end menu

@node Why Precedence
@subsection When Precedence is Needed

Consider the following ambiguous grammar fragment (ambiguous because the
input @w{@samp{1 - 2 * 3}} can be parsed in two different ways):

@example
@group
expr:
  expr '-' expr
| expr '*' expr
| expr '<' expr
| '(' expr ')'
@dots{}
;
@end group
@end example

@noindent
Suppose the parser has seen the tokens @samp{1}, @samp{-} and @samp{2};
should it reduce them via the rule for the subtraction operator?  It
depends on the next token.  Of course, if the next token is @samp{)}, we
must reduce; shifting is invalid because no single rule can reduce the
token sequence @w{@samp{- 2 )}} or anything starting with that.  But if
the next token is @samp{*} or @samp{<}, we have a choice: either
shifting or reduction would allow the parse to complete, but with
different results.

To decide which one Bison should do, we must consider the results.  If
the next operator token @var{op} is shifted, then it must be reduced
first in order to permit another opportunity to reduce the difference.
The result is (in effect) @w{@samp{1 - (2 @var{op} 3)}}.  On the other
hand, if the subtraction is reduced before shifting @var{op}, the result
is @w{@samp{(1 - 2) @var{op} 3}}.  Clearly, then, the choice of shift or
reduce should depend on the relative precedence of the operators
@samp{-} and @var{op}: @samp{*} should be shifted first, but not
@samp{<}.

@cindex associativity
What about input such as @w{@samp{1 - 2 - 5}}; should this be
@w{@samp{(1 - 2) - 5}} or should it be @w{@samp{1 - (2 - 5)}}?  For most
operators we prefer the former, which is called @dfn{left association}.
The latter alternative, @dfn{right association}, is desirable for
assignment operators.  The choice of left or right association is a
matter of whether the parser chooses to shift or reduce when the stack
contains @w{@samp{1 - 2}} and the lookahead token is @samp{-}: shifting
makes right-associativity.

@node Using Precedence
@subsection Specifying Operator Precedence
@findex %left
@findex %nonassoc
@findex %precedence
@findex %right

Bison allows you to specify these choices with the operator precedence
declarations @code{%left} and @code{%right}.  Each such declaration
contains a list of tokens, which are operators whose precedence and
associativity is being declared.  The @code{%left} declaration makes all
those operators left-associative and the @code{%right} declaration makes
them right-associative.  A third alternative is @code{%nonassoc}, which
declares that it is a syntax error to find the same operator twice ``in a
row''.
The last alternative, @code{%precedence}, allows to define only
precedence and no associativity at all.  As a result, any
associativity-related conflict that remains will be reported as an
compile-time error.  The directive @code{%nonassoc} creates run-time
error: using the operator in a associative way is a syntax error.  The
directive @code{%precedence} creates compile-time errors: an operator
@emph{can} be involved in an associativity-related conflict, contrary to
what expected the grammar author.

The relative precedence of different operators is controlled by the
order in which they are declared.  The first precedence/associativity
declaration in the file declares the operators whose
precedence is lowest, the next such declaration declares the operators
whose precedence is a little higher, and so on.

@node Precedence Only
@subsection Specifying Precedence Only
@findex %precedence

Since POSIX Yacc defines only @code{%left}, @code{%right}, and
@code{%nonassoc}, which all defines precedence and associativity, little
attention is paid to the fact that precedence cannot be defined without
defining associativity.  Yet, sometimes, when trying to solve a
conflict, precedence suffices.  In such a case, using @code{%left},
@code{%right}, or @code{%nonassoc} might hide future (associativity
related) conflicts that would remain hidden.

The dangling @code{else} ambiguity (@pxref{Shift/Reduce, , Shift/Reduce
Conflicts}) can be solved explicitly.  This shift/reduce conflicts occurs
in the following situation, where the period denotes the current parsing
state:

@example
if @var{e1} then if  @var{e2} then @var{s1} . else @var{s2}
@end example

The conflict involves the reduction of the rule @samp{IF expr THEN
stmt}, which precedence is by default that of its last token
(@code{THEN}), and the shifting of the token @code{ELSE}.  The usual
disambiguation (attach the @code{else} to the closest @code{if}),
shifting must be preferred, i.e., the precedence of @code{ELSE} must be
higher than that of @code{THEN}.  But neither is expected to be involved
in an associativity related conflict, which can be specified as follows.

@example
%precedence THEN
%precedence ELSE
@end example

The unary-minus is another typical example where associativity is
usually over-specified, see @ref{Infix Calc, , Infix Notation
Calculator: @code{calc}}.  The @code{%left} directive is traditionally
used to declare the precedence of @code{NEG}, which is more than needed
since it also defines its associativity.  While this is harmless in the
traditional example, who knows how @code{NEG} might be used in future
evolutions of the grammar@dots{}

@node Precedence Examples
@subsection Precedence Examples

In our example, we would want the following declarations:

@example
%left '<'
%left '-'
%left '*'
@end example

In a more complete example, which supports other operators as well, we
would declare them in groups of equal precedence.  For example, @code{'+'} is
declared with @code{'-'}:

@example
%left '<' '>' '=' "!=" "<=" ">="
%left '+' '-'
%left '*' '/'
@end example

@node How Precedence
@subsection How Precedence Works

The first effect of the precedence declarations is to assign precedence
levels to the terminal symbols declared.  The second effect is to assign
precedence levels to certain rules: each rule gets its precedence from
the last terminal symbol mentioned in the components.  (You can also
specify explicitly the precedence of a rule.  @xref{Contextual
Precedence, ,Context-Dependent Precedence}.)

Finally, the resolution of conflicts works by comparing the precedence
of the rule being considered with that of the lookahead token.  If the
token's precedence is higher, the choice is to shift.  If the rule's
precedence is higher, the choice is to reduce.  If they have equal
precedence, the choice is made based on the associativity of that
precedence level.  The verbose output file made by @samp{-v}
(@pxref{Invocation, ,Invoking Bison}) says how each conflict was
resolved.

Not all rules and not all tokens have precedence.  If either the rule or
the lookahead token has no precedence, then the default is to shift.

@node Non Operators
@subsection Using Precedence For Non Operators

Using properly precedence and associativity directives can help fixing
shift/reduce conflicts that do not involve arithmetics-like operators.  For
instance, the ``dangling @code{else}'' problem (@pxref{Shift/Reduce, ,
Shift/Reduce Conflicts}) can be solved elegantly in two different ways.

In the present case, the conflict is between the token @code{"else"} willing
to be shifted, and the rule @samp{if_stmt: "if" expr "then" stmt}, asking
for reduction.  By default, the precedence of a rule is that of its last
token, here @code{"then"}, so the conflict will be solved appropriately
by giving @code{"else"} a precedence higher than that of @code{"then"}, for
instance as follows:

@example
@group
%precedence "then"
%precedence "else"
@end group
@end example

Alternatively, you may give both tokens the same precedence, in which case
associativity is used to solve the conflict.  To preserve the shift action,
use right associativity:

@example
%right "then" "else"
@end example

Neither solution is perfect however.  Since Bison does not provide, so far,
``scoped'' precedence, both force you to declare the precedence
of these keywords with respect to the other operators your grammar.
Therefore, instead of being warned about new conflicts you would be unaware
of (e.g., a shift/reduce conflict due to @samp{if test then 1 else 2 + 3}
being ambiguous: @samp{if test then 1 else (2 + 3)} or @samp{(if test then 1
else 2) + 3}?), the conflict will be already ``fixed''.

@node Contextual Precedence
@section Context-Dependent Precedence
@cindex context-dependent precedence
@cindex unary operator precedence
@cindex precedence, context-dependent
@cindex precedence, unary operator
@findex %prec

Often the precedence of an operator depends on the context.  This sounds
outlandish at first, but it is really very common.  For example, a minus
sign typically has a very high precedence as a unary operator, and a
somewhat lower precedence (lower than multiplication) as a binary operator.

The Bison precedence declarations
can only be used once for a given token; so a token has
only one precedence declared in this way.  For context-dependent
precedence, you need to use an additional mechanism: the @code{%prec}
modifier for rules.

The @code{%prec} modifier declares the precedence of a particular rule by
specifying a terminal symbol whose precedence should be used for that rule.
It's not necessary for that symbol to appear otherwise in the rule.  The
modifier's syntax is:

@example
%prec @var{terminal-symbol}
@end example

@noindent
and it is written after the components of the rule.  Its effect is to
assign the rule the precedence of @var{terminal-symbol}, overriding
the precedence that would be deduced for it in the ordinary way.  The
altered rule precedence then affects how conflicts involving that rule
are resolved (@pxref{Precedence, ,Operator Precedence}).

Here is how @code{%prec} solves the problem of unary minus.  First, declare
a precedence for a fictitious terminal symbol named @code{UMINUS}.  There
are no tokens of this type, but the symbol serves to stand for its
precedence:

@example
@dots{}
%left '+' '-'
%left '*'
%left UMINUS
@end example

Now the precedence of @code{UMINUS} can be used in specific rules:

@example
@group
exp:
  @dots{}
| exp '-' exp
  @dots{}
| '-' exp %prec UMINUS
@end group
@end example

@ifset defaultprec
If you forget to append @code{%prec UMINUS} to the rule for unary
minus, Bison silently assumes that minus has its usual precedence.
This kind of problem can be tricky to debug, since one typically
discovers the mistake only by testing the code.

The @code{%no-default-prec;} declaration makes it easier to discover
this kind of problem systematically.  It causes rules that lack a
@code{%prec} modifier to have no precedence, even if the last terminal
symbol mentioned in their components has a declared precedence.

If @code{%no-default-prec;} is in effect, you must specify @code{%prec}
for all rules that participate in precedence conflict resolution.
Then you will see any shift/reduce conflict until you tell Bison how
to resolve it, either by changing your grammar or by adding an
explicit precedence.  This will probably add declarations to the
grammar, but it helps to protect against incorrect rule precedences.

The effect of @code{%no-default-prec;} can be reversed by giving
@code{%default-prec;}, which is the default.
@end ifset

@node Parser States
@section Parser States
@cindex finite-state machine
@cindex parser state
@cindex state (of parser)

The function @code{yyparse} is implemented using a finite-state machine.
The values pushed on the parser stack are not simply token type codes; they
represent the entire sequence of terminal and nonterminal symbols at or
near the top of the stack.  The current state collects all the information
about previous input which is relevant to deciding what to do next.

Each time a lookahead token is read, the current parser state together
with the type of lookahead token are looked up in a table.  This table
entry can say, ``Shift the lookahead token.''  In this case, it also
specifies the new parser state, which is pushed onto the top of the
parser stack.  Or it can say, ``Reduce using rule number @var{n}.''
This means that a certain number of tokens or groupings are taken off
the top of the stack, and replaced by one grouping.  In other words,
that number of states are popped from the stack, and one new state is
pushed.

There is one other alternative: the table can say that the lookahead token
is erroneous in the current state.  This causes error processing to begin
(@pxref{Error Recovery}).

@node Reduce/Reduce
@section Reduce/Reduce Conflicts
@cindex reduce/reduce conflict
@cindex conflicts, reduce/reduce

A reduce/reduce conflict occurs if there are two or more rules that apply
to the same sequence of input.  This usually indicates a serious error
in the grammar.

For example, here is an erroneous attempt to define a sequence
of zero or more @code{word} groupings.

@example
@group
sequence:
  %empty         @{ printf ("empty sequence\n"); @}
| maybeword
| sequence word  @{ printf ("added word %s\n", $2); @}
;
@end group

@group
maybeword:
  %empty    @{ printf ("empty maybeword\n"); @}
| word      @{ printf ("single word %s\n", $1); @}
;
@end group
@end example

@noindent
The error is an ambiguity: there is more than one way to parse a single
@code{word} into a @code{sequence}.  It could be reduced to a
@code{maybeword} and then into a @code{sequence} via the second rule.
Alternatively, nothing-at-all could be reduced into a @code{sequence}
via the first rule, and this could be combined with the @code{word}
using the third rule for @code{sequence}.

There is also more than one way to reduce nothing-at-all into a
@code{sequence}.  This can be done directly via the first rule,
or indirectly via @code{maybeword} and then the second rule.

You might think that this is a distinction without a difference, because it
does not change whether any particular input is valid or not.  But it does
affect which actions are run.  One parsing order runs the second rule's
action; the other runs the first rule's action and the third rule's action.
In this example, the output of the program changes.

Bison resolves a reduce/reduce conflict by choosing to use the rule that
appears first in the grammar, but it is very risky to rely on this.  Every
reduce/reduce conflict must be studied and usually eliminated.  Here is the
proper way to define @code{sequence}:

@example
@group
sequence:
  %empty         @{ printf ("empty sequence\n"); @}
| sequence word  @{ printf ("added word %s\n", $2); @}
;
@end group
@end example

Here is another common error that yields a reduce/reduce conflict:

@example
@group
sequence:
  %empty
| sequence words
| sequence redirects
;
@end group

@group
words:
  %empty
| words word
;
@end group

@group
redirects:
  %empty
| redirects redirect
;
@end group
@end example

@noindent
The intention here is to define a sequence which can contain either
@code{word} or @code{redirect} groupings.  The individual definitions of
@code{sequence}, @code{words} and @code{redirects} are error-free, but the
three together make a subtle ambiguity: even an empty input can be parsed
in infinitely many ways!

Consider: nothing-at-all could be a @code{words}.  Or it could be two
@code{words} in a row, or three, or any number.  It could equally well be a
@code{redirects}, or two, or any number.  Or it could be a @code{words}
followed by three @code{redirects} and another @code{words}.  And so on.

Here are two ways to correct these rules.  First, to make it a single level
of sequence:

@example
sequence:
  %empty
| sequence word
| sequence redirect
;
@end example

Second, to prevent either a @code{words} or a @code{redirects}
from being empty:

@example
@group
sequence:
  %empty
| sequence words
| sequence redirects
;
@end group

@group
words:
  word
| words word
;
@end group

@group
redirects:
  redirect
| redirects redirect
;
@end group
@end example

Yet this proposal introduces another kind of ambiguity!  The input
@samp{word word} can be parsed as a single @code{words} composed of two
@samp{word}s, or as two one-@code{word} @code{words} (and likewise for
@code{redirect}/@code{redirects}).  However this ambiguity is now a
shift/reduce conflict, and therefore it can now be addressed with precedence
directives.

To simplify the matter, we will proceed with @code{word} and @code{redirect}
being tokens: @code{"word"} and @code{"redirect"}.

To prefer the longest @code{words}, the conflict between the token
@code{"word"} and the rule @samp{sequence: sequence words} must be resolved
as a shift.  To this end, we use the same techniques as exposed above, see
@ref{Non Operators,, Using Precedence For Non Operators}.  One solution
relies on precedences: use @code{%prec} to give a lower precedence to the
rule:

@example
%precedence "word"
%precedence "sequence"
%%
@group
sequence:
  %empty
| sequence word      %prec "sequence"
| sequence redirect  %prec "sequence"
;
@end group

@group
words:
  word
| words "word"
;
@end group
@end example

Another solution relies on associativity: provide both the token and the
rule with the same precedence, but make them right-associative:

@example
%right "word" "redirect"
%%
@group
sequence:
  %empty
| sequence word      %prec "word"
| sequence redirect  %prec "redirect"
;
@end group
@end example

@node Mysterious Conflicts
@section Mysterious Conflicts
@cindex Mysterious Conflicts

Sometimes reduce/reduce conflicts can occur that don't look warranted.
Here is an example:

@example
@group
%%
def: param_spec return_spec ',';
param_spec:
  type
| name_list ':' type
;
@end group

@group
return_spec:
  type
| name ':' type
;
@end group

type: "id";

@group
name: "id";
name_list:
  name
| name ',' name_list
;
@end group
@end example

It would seem that this grammar can be parsed with only a single token of
lookahead: when a @code{param_spec} is being read, an @code{"id"} is a
@code{name} if a comma or colon follows, or a @code{type} if another
@code{"id"} follows.  In other words, this grammar is LR(1).

@cindex LR
@cindex LALR
However, for historical reasons, Bison cannot by default handle all
LR(1) grammars.
In this grammar, two contexts, that after an @code{"id"} at the beginning
of a @code{param_spec} and likewise at the beginning of a
@code{return_spec}, are similar enough that Bison assumes they are the
same.
They appear similar because the same set of rules would be
active---the rule for reducing to a @code{name} and that for reducing to
a @code{type}.  Bison is unable to determine at that stage of processing
that the rules would require different lookahead tokens in the two
contexts, so it makes a single parser state for them both.  Combining
the two contexts causes a conflict later.  In parser terminology, this
occurrence means that the grammar is not LALR(1).

@cindex IELR
@cindex canonical LR
For many practical grammars (specifically those that fall into the non-LR(1)
class), the limitations of LALR(1) result in difficulties beyond just
mysterious reduce/reduce conflicts.  The best way to fix all these problems
is to select a different parser table construction algorithm.  Either
IELR(1) or canonical LR(1) would suffice, but the former is more efficient
and easier to debug during development.  @xref{LR Table Construction}, for
details.  (Bison's IELR(1) and canonical LR(1) implementations are
experimental.  More user feedback will help to stabilize them.)

If you instead wish to work around LALR(1)'s limitations, you
can often fix a mysterious conflict by identifying the two parser states
that are being confused, and adding something to make them look
distinct.  In the above example, adding one rule to
@code{return_spec} as follows makes the problem go away:

@example
@group
@dots{}
return_spec:
  type
| name ':' type
| "id" "bogus"       /* This rule is never used.  */
;
@end group
@end example

This corrects the problem because it introduces the possibility of an
additional active rule in the context after the @code{"id"} at the beginning of
@code{return_spec}.  This rule is not active in the corresponding context
in a @code{param_spec}, so the two contexts receive distinct parser states.
As long as the token @code{"bogus"} is never generated by @code{yylex},
the added rule cannot alter the way actual input is parsed.

In this particular example, there is another way to solve the problem:
rewrite the rule for @code{return_spec} to use @code{"id"} directly
instead of via @code{name}.  This also causes the two confusing
contexts to have different sets of active rules, because the one for
@code{return_spec} activates the altered rule for @code{return_spec}
rather than the one for @code{name}.

@example
@group
param_spec:
  type
| name_list ':' type
;
@end group

@group
return_spec:
  type
| "id" ':' type
;
@end group
@end example

For a more detailed exposition of LALR(1) parsers and parser
generators, @pxref{Bibliography,,DeRemer 1982}.

@node Tuning LR
@section Tuning LR

The default behavior of Bison's LR-based parsers is chosen mostly for
historical reasons, but that behavior is often not robust.  For example, in
the previous section, we discussed the mysterious conflicts that can be
produced by LALR(1), Bison's default parser table construction algorithm.
Another example is Bison's @code{%define parse.error verbose} directive,
which instructs the generated parser to produce verbose syntax error
messages, which can sometimes contain incorrect information.

In this section, we explore several modern features of Bison that allow you
to tune fundamental aspects of the generated LR-based parsers.  Some of
these features easily eliminate shortcomings like those mentioned above.
Others can be helpful purely for understanding your parser.

Most of the features discussed in this section are still experimental.  More
user feedback will help to stabilize them.

@menu
* LR Table Construction:: Choose a different construction algorithm.
* Default Reductions::    Disable default reductions.
* LAC::                   Correct lookahead sets in the parser states.
* Unreachable States::    Keep unreachable parser states for debugging.
@end menu

@node LR Table Construction
@subsection LR Table Construction
@cindex Mysterious Conflict
@cindex LALR
@cindex IELR
@cindex canonical LR
@findex %define lr.type

For historical reasons, Bison constructs LALR(1) parser tables by default.
However, LALR does not possess the full language-recognition power of LR.
As a result, the behavior of parsers employing LALR parser tables is often
mysterious.  We presented a simple example of this effect in @ref{Mysterious
Conflicts}.

As we also demonstrated in that example, the traditional approach to
eliminating such mysterious behavior is to restructure the grammar.
Unfortunately, doing so correctly is often difficult.  Moreover, merely
discovering that LALR causes mysterious behavior in your parser can be
difficult as well.

Fortunately, Bison provides an easy way to eliminate the possibility of such
mysterious behavior altogether.  You simply need to activate a more powerful
parser table construction algorithm by using the @code{%define lr.type}
directive.

@deffn {Directive} {%define lr.type} @var{type}
Specify the type of parser tables within the LR(1) family.  The accepted
values for @var{type} are:

@itemize
@item @code{lalr} (default)
@item @code{ielr}
@item @code{canonical-lr}
@end itemize

(This feature is experimental. More user feedback will help to stabilize
it.)
@end deffn

For example, to activate IELR, you might add the following directive to you
grammar file:

@example
%define lr.type ielr
@end example

@noindent For the example in @ref{Mysterious Conflicts}, the mysterious
conflict is then eliminated, so there is no need to invest time in
comprehending the conflict or restructuring the grammar to fix it.  If,
during future development, the grammar evolves such that all mysterious
behavior would have disappeared using just LALR, you need not fear that
continuing to use IELR will result in unnecessarily large parser tables.
That is, IELR generates LALR tables when LALR (using a deterministic parsing
algorithm) is sufficient to support the full language-recognition power of
LR.  Thus, by enabling IELR at the start of grammar development, you can
safely and completely eliminate the need to consider LALR's shortcomings.

While IELR is almost always preferable, there are circumstances where LALR
or the canonical LR parser tables described by Knuth
(@pxref{Bibliography,,Knuth 1965}) can be useful.  Here we summarize the
relative advantages of each parser table construction algorithm within
Bison:

@itemize
@item LALR

There are at least two scenarios where LALR can be worthwhile:

@itemize
@item GLR without static conflict resolution.

@cindex GLR with LALR
When employing GLR parsers (@pxref{GLR Parsers}), if you do not resolve any
conflicts statically (for example, with @code{%left} or @code{%precedence}),
then
the parser explores all potential parses of any given input.  In this case,
the choice of parser table construction algorithm is guaranteed not to alter
the language accepted by the parser.  LALR parser tables are the smallest
parser tables Bison can currently construct, so they may then be preferable.
Nevertheless, once you begin to resolve conflicts statically, GLR behaves
more like a deterministic parser in the syntactic contexts where those
conflicts appear, and so either IELR or canonical LR can then be helpful to
avoid LALR's mysterious behavior.

@item Malformed grammars.

Occasionally during development, an especially malformed grammar with a
major recurring flaw may severely impede the IELR or canonical LR parser
table construction algorithm.  LALR can be a quick way to construct parser
tables in order to investigate such problems while ignoring the more subtle
differences from IELR and canonical LR.
@end itemize

@item IELR

IELR (Inadequacy Elimination LR) is a minimal LR algorithm.  That is, given
any grammar (LR or non-LR), parsers using IELR or canonical LR parser tables
always accept exactly the same set of sentences.  However, like LALR, IELR
merges parser states during parser table construction so that the number of
parser states is often an order of magnitude less than for canonical LR.
More importantly, because canonical LR's extra parser states may contain
duplicate conflicts in the case of non-LR grammars, the number of conflicts
for IELR is often an order of magnitude less as well.  This effect can
significantly reduce the complexity of developing a grammar.

@item Canonical LR

@cindex delayed syntax error detection
@cindex LAC
@findex %nonassoc
While inefficient, canonical LR parser tables can be an interesting means to
explore a grammar because they possess a property that IELR and LALR tables
do not.  That is, if @code{%nonassoc} is not used and default reductions are
left disabled (@pxref{Default Reductions}), then, for every left context of
every canonical LR state, the set of tokens accepted by that state is
guaranteed to be the exact set of tokens that is syntactically acceptable in
that left context.  It might then seem that an advantage of canonical LR
parsers in production is that, under the above constraints, they are
guaranteed to detect a syntax error as soon as possible without performing
any unnecessary reductions.  However, IELR parsers that use LAC are also
able to achieve this behavior without sacrificing @code{%nonassoc} or
default reductions.  For details and a few caveats of LAC, @pxref{LAC}.
@end itemize

For a more detailed exposition of the mysterious behavior in LALR parsers
and the benefits of IELR, @pxref{Bibliography,,Denny 2008 March}, and
@ref{Bibliography,,Denny 2010 November}.

@node Default Reductions
@subsection Default Reductions
@cindex default reductions
@findex %define lr.default-reduction
@findex %nonassoc

After parser table construction, Bison identifies the reduction with the
largest lookahead set in each parser state.  To reduce the size of the
parser state, traditional Bison behavior is to remove that lookahead set and
to assign that reduction to be the default parser action.  Such a reduction
is known as a @dfn{default reduction}.

Default reductions affect more than the size of the parser tables.  They
also affect the behavior of the parser:

@itemize
@item Delayed @code{yylex} invocations.

@cindex delayed yylex invocations
@cindex consistent states
@cindex defaulted states
A @dfn{consistent state} is a state that has only one possible parser
action.  If that action is a reduction and is encoded as a default
reduction, then that consistent state is called a @dfn{defaulted state}.
Upon reaching a defaulted state, a Bison-generated parser does not bother to
invoke @code{yylex} to fetch the next token before performing the reduction.
In other words, whether default reductions are enabled in consistent states
determines how soon a Bison-generated parser invokes @code{yylex} for a
token: immediately when it @emph{reaches} that token in the input or when it
eventually @emph{needs} that token as a lookahead to determine the next
parser action.  Traditionally, default reductions are enabled, and so the
parser exhibits the latter behavior.

The presence of defaulted states is an important consideration when
designing @code{yylex} and the grammar file.  That is, if the behavior of
@code{yylex} can influence or be influenced by the semantic actions
associated with the reductions in defaulted states, then the delay of the
next @code{yylex} invocation until after those reductions is significant.
For example, the semantic actions might pop a scope stack that @code{yylex}
uses to determine what token to return.  Thus, the delay might be necessary
to ensure that @code{yylex} does not look up the next token in a scope that
should already be considered closed.

@item Delayed syntax error detection.

@cindex delayed syntax error detection
When the parser fetches a new token by invoking @code{yylex}, it checks
whether there is an action for that token in the current parser state.  The
parser detects a syntax error if and only if either (1) there is no action
for that token or (2) the action for that token is the error action (due to
the use of @code{%nonassoc}).  However, if there is a default reduction in
that state (which might or might not be a defaulted state), then it is
impossible for condition 1 to exist.  That is, all tokens have an action.
Thus, the parser sometimes fails to detect the syntax error until it reaches
a later state.

@cindex LAC
@c If there's an infinite loop, default reductions can prevent an incorrect
@c sentence from being rejected.
While default reductions never cause the parser to accept syntactically
incorrect sentences, the delay of syntax error detection can have unexpected
effects on the behavior of the parser.  However, the delay can be caused
anyway by parser state merging and the use of @code{%nonassoc}, and it can
be fixed by another Bison feature, LAC.  We discuss the effects of delayed
syntax error detection and LAC more in the next section (@pxref{LAC}).
@end itemize

For canonical LR, the only default reduction that Bison enables by default
is the accept action, which appears only in the accepting state, which has
no other action and is thus a defaulted state.  However, the default accept
action does not delay any @code{yylex} invocation or syntax error detection
because the accept action ends the parse.

For LALR and IELR, Bison enables default reductions in nearly all states by
default.  There are only two exceptions.  First, states that have a shift
action on the @code{error} token do not have default reductions because
delayed syntax error detection could then prevent the @code{error} token
from ever being shifted in that state.  However, parser state merging can
cause the same effect anyway, and LAC fixes it in both cases, so future
versions of Bison might drop this exception when LAC is activated.  Second,
GLR parsers do not record the default reduction as the action on a lookahead
token for which there is a conflict.  The correct action in this case is to
split the parse instead.

To adjust which states have default reductions enabled, use the
@code{%define lr.default-reduction} directive.

@deffn {Directive} {%define lr.default-reduction} @var{where}
Specify the kind of states that are permitted to contain default reductions.
The accepted values of @var{where} are:
@itemize
@item @code{most} (default for LALR and IELR)
@item @code{consistent}
@item @code{accepting} (default for canonical LR)
@end itemize

(The ability to specify where default reductions are permitted is
experimental.  More user feedback will help to stabilize it.)
@end deffn

@node LAC
@subsection LAC
@findex %define parse.lac
@cindex LAC
@cindex lookahead correction

Canonical LR, IELR, and LALR can suffer from a couple of problems upon
encountering a syntax error.  First, the parser might perform additional
parser stack reductions before discovering the syntax error.  Such
reductions can perform user semantic actions that are unexpected because
they are based on an invalid token, and they cause error recovery to begin
in a different syntactic context than the one in which the invalid token was
encountered.  Second, when verbose error messages are enabled (@pxref{Error
Reporting}), the expected token list in the syntax error message can both
contain invalid tokens and omit valid tokens.

The culprits for the above problems are @code{%nonassoc}, default reductions
in inconsistent states (@pxref{Default Reductions}), and parser state
merging.  Because IELR and LALR merge parser states, they suffer the most.
Canonical LR can suffer only if @code{%nonassoc} is used or if default
reductions are enabled for inconsistent states.

LAC (Lookahead Correction) is a new mechanism within the parsing algorithm
that solves these problems for canonical LR, IELR, and LALR without
sacrificing @code{%nonassoc}, default reductions, or state merging.  You can
enable LAC with the @code{%define parse.lac} directive.

@deffn {Directive} {%define parse.lac} @var{value}
Enable LAC to improve syntax error handling.
@itemize
@item @code{none} (default)
@item @code{full}
@end itemize
(This feature is experimental.  More user feedback will help to stabilize
it.  Moreover, it is currently only available for deterministic parsers in
C.)
@end deffn

Conceptually, the LAC mechanism is straight-forward.  Whenever the parser
fetches a new token from the scanner so that it can determine the next
parser action, it immediately suspends normal parsing and performs an
exploratory parse using a temporary copy of the normal parser state stack.
During this exploratory parse, the parser does not perform user semantic
actions.  If the exploratory parse reaches a shift action, normal parsing
then resumes on the normal parser stacks.  If the exploratory parse reaches
an error instead, the parser reports a syntax error.  If verbose syntax
error messages are enabled, the parser must then discover the list of
expected tokens, so it performs a separate exploratory parse for each token
in the grammar.

There is one subtlety about the use of LAC.  That is, when in a consistent
parser state with a default reduction, the parser will not attempt to fetch
a token from the scanner because no lookahead is needed to determine the
next parser action.  Thus, whether default reductions are enabled in
consistent states (@pxref{Default Reductions}) affects how soon the parser
detects a syntax error: immediately when it @emph{reaches} an erroneous
token or when it eventually @emph{needs} that token as a lookahead to
determine the next parser action.  The latter behavior is probably more
intuitive, so Bison currently provides no way to achieve the former behavior
while default reductions are enabled in consistent states.

Thus, when LAC is in use, for some fixed decision of whether to enable
default reductions in consistent states, canonical LR and IELR behave almost
exactly the same for both syntactically acceptable and syntactically
unacceptable input.  While LALR still does not support the full
language-recognition power of canonical LR and IELR, LAC at least enables
LALR's syntax error handling to correctly reflect LALR's
language-recognition power.

There are a few caveats to consider when using LAC:

@itemize
@item Infinite parsing loops.

IELR plus LAC does have one shortcoming relative to canonical LR.  Some
parsers generated by Bison can loop infinitely.  LAC does not fix infinite
parsing loops that occur between encountering a syntax error and detecting
it, but enabling canonical LR or disabling default reductions sometimes
does.

@item Verbose error message limitations.

Because of internationalization considerations, Bison-generated parsers
limit the size of the expected token list they are willing to report in a
verbose syntax error message.  If the number of expected tokens exceeds that
limit, the list is simply dropped from the message.  Enabling LAC can
increase the size of the list and thus cause the parser to drop it.  Of
course, dropping the list is better than reporting an incorrect list.

@item Performance.

Because LAC requires many parse actions to be performed twice, it can have a
performance penalty.  However, not all parse actions must be performed
twice.  Specifically, during a series of default reductions in consistent
states and shift actions, the parser never has to initiate an exploratory
parse.  Moreover, the most time-consuming tasks in a parse are often the
file I/O, the lexical analysis performed by the scanner, and the user's
semantic actions, but none of these are performed during the exploratory
parse.  Finally, the base of the temporary stack used during an exploratory
parse is a pointer into the normal parser state stack so that the stack is
never physically copied.  In our experience, the performance penalty of LAC
has proved insignificant for practical grammars.
@end itemize

While the LAC algorithm shares techniques that have been recognized in the
parser community for years, for the publication that introduces LAC,
@pxref{Bibliography,,Denny 2010 May}.

@node Unreachable States
@subsection Unreachable States
@findex %define lr.keep-unreachable-state
@cindex unreachable states

If there exists no sequence of transitions from the parser's start state to
some state @var{s}, then Bison considers @var{s} to be an @dfn{unreachable
state}.  A state can become unreachable during conflict resolution if Bison
disables a shift action leading to it from a predecessor state.

By default, Bison removes unreachable states from the parser after conflict
resolution because they are useless in the generated parser.  However,
keeping unreachable states is sometimes useful when trying to understand the
relationship between the parser and the grammar.

@deffn {Directive} {%define lr.keep-unreachable-state} @var{value}
Request that Bison allow unreachable states to remain in the parser tables.
@var{value} must be a Boolean.  The default is @code{false}.
@end deffn

There are a few caveats to consider:

@itemize @bullet
@item Missing or extraneous warnings.

Unreachable states may contain conflicts and may use rules not used in any
other state.  Thus, keeping unreachable states may induce warnings that are
irrelevant to your parser's behavior, and it may eliminate warnings that are
relevant.  Of course, the change in warnings may actually be relevant to a
parser table analysis that wants to keep unreachable states, so this
behavior will likely remain in future Bison releases.

@item Other useless states.

While Bison is able to remove unreachable states, it is not guaranteed to
remove other kinds of useless states.  Specifically, when Bison disables
reduce actions during conflict resolution, some goto actions may become
useless, and thus some additional states may become useless.  If Bison were
to compute which goto actions were useless and then disable those actions,
it could identify such states as unreachable and then remove those states.
However, Bison does not compute which goto actions are useless.
@end itemize

@node Generalized LR Parsing
@section Generalized LR (GLR) Parsing
@cindex GLR parsing
@cindex generalized LR (GLR) parsing
@cindex ambiguous grammars
@cindex nondeterministic parsing

Bison produces @emph{deterministic} parsers that choose uniquely
when to reduce and which reduction to apply
based on a summary of the preceding input and on one extra token of lookahead.
As a result, normal Bison handles a proper subset of the family of
context-free languages.
Ambiguous grammars, since they have strings with more than one possible
sequence of reductions cannot have deterministic parsers in this sense.
The same is true of languages that require more than one symbol of
lookahead, since the parser lacks the information necessary to make a
decision at the point it must be made in a shift-reduce parser.
Finally, as previously mentioned (@pxref{Mysterious Conflicts}),
there are languages where Bison's default choice of how to
summarize the input seen so far loses necessary information.

When you use the @samp{%glr-parser} declaration in your grammar file,
Bison generates a parser that uses a different algorithm, called
Generalized LR (or GLR).  A Bison GLR
parser uses the same basic
algorithm for parsing as an ordinary Bison parser, but behaves
differently in cases where there is a shift-reduce conflict that has not
been resolved by precedence rules (@pxref{Precedence}) or a
reduce-reduce conflict.  When a GLR parser encounters such a
situation, it
effectively @emph{splits} into a several parsers, one for each possible
shift or reduction.  These parsers then proceed as usual, consuming
tokens in lock-step.  Some of the stacks may encounter other conflicts
and split further, with the result that instead of a sequence of states,
a Bison GLR parsing stack is what is in effect a tree of states.

In effect, each stack represents a guess as to what the proper parse
is.  Additional input may indicate that a guess was wrong, in which case
the appropriate stack silently disappears.  Otherwise, the semantics
actions generated in each stack are saved, rather than being executed
immediately.  When a stack disappears, its saved semantic actions never
get executed.  When a reduction causes two stacks to become equivalent,
their sets of semantic actions are both saved with the state that
results from the reduction.  We say that two stacks are equivalent
when they both represent the same sequence of states,
and each pair of corresponding states represents a
grammar symbol that produces the same segment of the input token
stream.

Whenever the parser makes a transition from having multiple
states to having one, it reverts to the normal deterministic parsing
algorithm, after resolving and executing the saved-up actions.
At this transition, some of the states on the stack will have semantic
values that are sets (actually multisets) of possible actions.  The
parser tries to pick one of the actions by first finding one whose rule
has the highest dynamic precedence, as set by the @samp{%dprec}
declaration.  Otherwise, if the alternative actions are not ordered by
precedence, but there the same merging function is declared for both
rules by the @samp{%merge} declaration,
Bison resolves and evaluates both and then calls the merge function on
the result.  Otherwise, it reports an ambiguity.

It is possible to use a data structure for the GLR parsing tree that
permits the processing of any LR(1) grammar in linear time (in the
size of the input), any unambiguous (not necessarily
LR(1)) grammar in
quadratic worst-case time, and any general (possibly ambiguous)
context-free grammar in cubic worst-case time.  However, Bison currently
uses a simpler data structure that requires time proportional to the
length of the input times the maximum number of stacks required for any
prefix of the input.  Thus, really ambiguous or nondeterministic
grammars can require exponential time and space to process.  Such badly
behaving examples, however, are not generally of practical interest.
Usually, nondeterminism in a grammar is local---the parser is ``in
doubt'' only for a few tokens at a time.  Therefore, the current data
structure should generally be adequate.  On LR(1) portions of a
grammar, in particular, it is only slightly slower than with the
deterministic LR(1) Bison parser.

For a more detailed exposition of GLR parsers, @pxref{Bibliography,,Scott
2000}.

@node Memory Management
@section Memory Management, and How to Avoid Memory Exhaustion
@cindex memory exhaustion
@cindex memory management
@cindex stack overflow
@cindex parser stack overflow
@cindex overflow of parser stack

The Bison parser stack can run out of memory if too many tokens are shifted and
not reduced.  When this happens, the parser function @code{yyparse}
calls @code{yyerror} and then returns 2.

Because Bison parsers have growing stacks, hitting the upper limit
usually results from using a right recursion instead of a left
recursion, see @ref{Recursion, ,Recursive Rules}.

@vindex YYMAXDEPTH
By defining the macro @code{YYMAXDEPTH}, you can control how deep the
parser stack can become before memory is exhausted.  Define the
macro with a value that is an integer.  This value is the maximum number
of tokens that can be shifted (and not reduced) before overflow.

The stack space allowed is not necessarily allocated.  If you specify a
large value for @code{YYMAXDEPTH}, the parser normally allocates a small
stack at first, and then makes it bigger by stages as needed.  This
increasing allocation happens automatically and silently.  Therefore,
you do not need to make @code{YYMAXDEPTH} painfully small merely to save
space for ordinary inputs that do not need much stack.

However, do not allow @code{YYMAXDEPTH} to be a value so large that
arithmetic overflow could occur when calculating the size of the stack
space.  Also, do not allow @code{YYMAXDEPTH} to be less than
@code{YYINITDEPTH}.

@cindex default stack limit
The default value of @code{YYMAXDEPTH}, if you do not define it, is
10000.

@vindex YYINITDEPTH
You can control how much stack is allocated initially by defining the
macro @code{YYINITDEPTH} to a positive integer.  For the deterministic
parser in C, this value must be a compile-time constant
unless you are assuming C99 or some other target language or compiler
that allows variable-length arrays.  The default is 200.

Do not allow @code{YYINITDEPTH} to be greater than @code{YYMAXDEPTH}.

You can generate a deterministic parser containing C++ user code from
the default (C) skeleton, as well as from the C++ skeleton
(@pxref{C++ Parsers}).  However, if you do use the default skeleton
and want to allow the parsing stack to grow,
be careful not to use semantic types or location types that require
non-trivial copy constructors.
The C skeleton bypasses these constructors when copying data to
new, larger stacks.

@node Error Recovery
@chapter Error Recovery
@cindex error recovery
@cindex recovery from errors

It is not usually acceptable to have a program terminate on a syntax
error.  For example, a compiler should recover sufficiently to parse the
rest of the input file and check it for errors; a calculator should accept
another expression.

In a simple interactive command parser where each input is one line, it may
be sufficient to allow @code{yyparse} to return 1 on error and have the
caller ignore the rest of the input line when that happens (and then call
@code{yyparse} again).  But this is inadequate for a compiler, because it
forgets all the syntactic context leading up to the error.  A syntax error
deep within a function in the compiler input should not cause the compiler
to treat the following line like the beginning of a source file.

@findex error
You can define how to recover from a syntax error by writing rules to
recognize the special token @code{error}.  This is a terminal symbol that
is always defined (you need not declare it) and reserved for error
handling.  The Bison parser generates an @code{error} token whenever a
syntax error happens; if you have provided a rule to recognize this token
in the current context, the parse can continue.

For example:

@example
stmts:
  %empty
| stmts '\n'
| stmts exp '\n'
| stmts error '\n'
@end example

The fourth rule in this example says that an error followed by a newline
makes a valid addition to any @code{stmts}.

What happens if a syntax error occurs in the middle of an @code{exp}?  The
error recovery rule, interpreted strictly, applies to the precise sequence
of a @code{stmts}, an @code{error} and a newline.  If an error occurs in
the middle of an @code{exp}, there will probably be some additional tokens
and subexpressions on the stack after the last @code{stmts}, and there
will be tokens to read before the next newline.  So the rule is not
applicable in the ordinary way.

But Bison can force the situation to fit the rule, by discarding part of
the semantic context and part of the input.  First it discards states
and objects from the stack until it gets back to a state in which the
@code{error} token is acceptable.  (This means that the subexpressions
already parsed are discarded, back to the last complete @code{stmts}.)
At this point the @code{error} token can be shifted.  Then, if the old
lookahead token is not acceptable to be shifted next, the parser reads
tokens and discards them until it finds a token which is acceptable.  In
this example, Bison reads and discards input until the next newline so
that the fourth rule can apply.  Note that discarded symbols are
possible sources of memory leaks, see @ref{Destructor Decl, , Freeing
Discarded Symbols}, for a means to reclaim this memory.

The choice of error rules in the grammar is a choice of strategies for
error recovery.  A simple and useful strategy is simply to skip the rest of
the current input line or current statement if an error is detected:

@example
stmt: error ';'  /* On error, skip until ';' is read.  */
@end example

It is also useful to recover to the matching close-delimiter of an
opening-delimiter that has already been parsed.  Otherwise the
close-delimiter will probably appear to be unmatched, and generate another,
spurious error message:

@example
primary:
  '(' expr ')'
| '(' error ')'
@dots{}
;
@end example

Error recovery strategies are necessarily guesses.  When they guess wrong,
one syntax error often leads to another.  In the above example, the error
recovery rule guesses that an error is due to bad input within one
@code{stmt}.  Suppose that instead a spurious semicolon is inserted in the
middle of a valid @code{stmt}.  After the error recovery rule recovers
from the first error, another syntax error will be found straightaway,
since the text following the spurious semicolon is also an invalid
@code{stmt}.

To prevent an outpouring of error messages, the parser will output no error
message for another syntax error that happens shortly after the first; only
after three consecutive input tokens have been successfully shifted will
error messages resume.

Note that rules which accept the @code{error} token may have actions, just
as any other rules can.

@findex yyerrok
You can make error messages resume immediately by using the macro
@code{yyerrok} in an action.  If you do this in the error rule's action, no
error messages will be suppressed.  This macro requires no arguments;
@samp{yyerrok;} is a valid C statement.

@findex yyclearin
The previous lookahead token is reanalyzed immediately after an error.  If
this is unacceptable, then the macro @code{yyclearin} may be used to clear
this token.  Write the statement @samp{yyclearin;} in the error rule's
action.
@xref{Action Features, ,Special Features for Use in Actions}.

For example, suppose that on a syntax error, an error handling routine is
called that advances the input stream to some point where parsing should
once again commence.  The next symbol returned by the lexical scanner is
probably correct.  The previous lookahead token ought to be discarded
with @samp{yyclearin;}.

@vindex YYRECOVERING
The expression @code{YYRECOVERING ()} yields 1 when the parser
is recovering from a syntax error, and 0 otherwise.
Syntax error diagnostics are suppressed while recovering from a syntax
error.

@node Context Dependency
@chapter Handling Context Dependencies

The Bison paradigm is to parse tokens first, then group them into larger
syntactic units.  In many languages, the meaning of a token is affected by
its context.  Although this violates the Bison paradigm, certain techniques
(known as @dfn{kludges}) may enable you to write Bison parsers for such
languages.

@menu
* Semantic Tokens::   Token parsing can depend on the semantic context.
* Lexical Tie-ins::   Token parsing can depend on the syntactic context.
* Tie-in Recovery::   Lexical tie-ins have implications for how
                        error recovery rules must be written.
@end menu

(Actually, ``kludge'' means any technique that gets its job done but is
neither clean nor robust.)

@node Semantic Tokens
@section Semantic Info in Token Types

The C language has a context dependency: the way an identifier is used
depends on what its current meaning is.  For example, consider this:

@example
foo (x);
@end example

This looks like a function call statement, but if @code{foo} is a typedef
name, then this is actually a declaration of @code{x}.  How can a Bison
parser for C decide how to parse this input?

The method used in GNU C is to have two different token types,
@code{IDENTIFIER} and @code{TYPENAME}.  When @code{yylex} finds an
identifier, it looks up the current declaration of the identifier in order
to decide which token type to return: @code{TYPENAME} if the identifier is
declared as a typedef, @code{IDENTIFIER} otherwise.

The grammar rules can then express the context dependency by the choice of
token type to recognize.  @code{IDENTIFIER} is accepted as an expression,
but @code{TYPENAME} is not.  @code{TYPENAME} can start a declaration, but
@code{IDENTIFIER} cannot.  In contexts where the meaning of the identifier
is @emph{not} significant, such as in declarations that can shadow a
typedef name, either @code{TYPENAME} or @code{IDENTIFIER} is
accepted---there is one rule for each of the two token types.

This technique is simple to use if the decision of which kinds of
identifiers to allow is made at a place close to where the identifier is
parsed.  But in C this is not always so: C allows a declaration to
redeclare a typedef name provided an explicit type has been specified
earlier:

@example
typedef int foo, bar;
int baz (void)
@group
@{
  static bar (bar);      /* @r{redeclare @code{bar} as static variable} */
  extern foo foo (foo);  /* @r{redeclare @code{foo} as function} */
  return foo (bar);
@}
@end group
@end example

Unfortunately, the name being declared is separated from the declaration
construct itself by a complicated syntactic structure---the ``declarator''.

As a result, part of the Bison parser for C needs to be duplicated, with
all the nonterminal names changed: once for parsing a declaration in
which a typedef name can be redefined, and once for parsing a
declaration in which that can't be done.  Here is a part of the
duplication, with actions omitted for brevity:

@example
@group
initdcl:
  declarator maybeasm '=' init
| declarator maybeasm
;
@end group

@group
notype_initdcl:
  notype_declarator maybeasm '=' init
| notype_declarator maybeasm
;
@end group
@end example

@noindent
Here @code{initdcl} can redeclare a typedef name, but @code{notype_initdcl}
cannot.  The distinction between @code{declarator} and
@code{notype_declarator} is the same sort of thing.

There is some similarity between this technique and a lexical tie-in
(described next), in that information which alters the lexical analysis is
changed during parsing by other parts of the program.  The difference is
here the information is global, and is used for other purposes in the
program.  A true lexical tie-in has a special-purpose flag controlled by
the syntactic context.

@node Lexical Tie-ins
@section Lexical Tie-ins
@cindex lexical tie-in

One way to handle context-dependency is the @dfn{lexical tie-in}: a flag
which is set by Bison actions, whose purpose is to alter the way tokens are
parsed.

For example, suppose we have a language vaguely like C, but with a special
construct @samp{hex (@var{hex-expr})}.  After the keyword @code{hex} comes
an expression in parentheses in which all integers are hexadecimal.  In
particular, the token @samp{a1b} must be treated as an integer rather than
as an identifier if it appears in that context.  Here is how you can do it:

@example
@group
%@{
  int hexflag;
  int yylex (void);
  void yyerror (char const *);
%@}
%%
@dots{}
@end group
@group
expr:
  IDENTIFIER
| constant
| HEX '('        @{ hexflag = 1; @}
    expr ')'     @{ hexflag = 0; $$ = $4; @}
| expr '+' expr  @{ $$ = make_sum ($1, $3); @}
@dots{}
;
@end group

@group
constant:
  INTEGER
| STRING
;
@end group
@end example

@noindent
Here we assume that @code{yylex} looks at the value of @code{hexflag}; when
it is nonzero, all integers are parsed in hexadecimal, and tokens starting
with letters are parsed as integers if possible.

The declaration of @code{hexflag} shown in the prologue of the grammar
file is needed to make it accessible to the actions (@pxref{Prologue,
,The Prologue}).  You must also write the code in @code{yylex} to obey
the flag.

@node Tie-in Recovery
@section Lexical Tie-ins and Error Recovery

Lexical tie-ins make strict demands on any error recovery rules you have.
@xref{Error Recovery}.

The reason for this is that the purpose of an error recovery rule is to
abort the parsing of one construct and resume in some larger construct.
For example, in C-like languages, a typical error recovery rule is to skip
tokens until the next semicolon, and then start a new statement, like this:

@example
stmt:
  expr ';'
| IF '(' expr ')' stmt @{ @dots{} @}
@dots{}
| error ';'  @{ hexflag = 0; @}
;
@end example

If there is a syntax error in the middle of a @samp{hex (@var{expr})}
construct, this error rule will apply, and then the action for the
completed @samp{hex (@var{expr})} will never run.  So @code{hexflag} would
remain set for the entire rest of the input, or until the next @code{hex}
keyword, causing identifiers to be misinterpreted as integers.

To avoid this problem the error recovery rule itself clears @code{hexflag}.

There may also be an error recovery rule that works within expressions.
For example, there could be a rule which applies within parentheses
and skips to the close-parenthesis:

@example
@group
expr:
  @dots{}
| '(' expr ')'   @{ $$ = $2; @}
| '(' error ')'
@dots{}
@end group
@end example

If this rule acts within the @code{hex} construct, it is not going to abort
that construct (since it applies to an inner level of parentheses within
the construct).  Therefore, it should not clear the flag: the rest of
the @code{hex} construct should be parsed with the flag still in effect.

What if there is an error recovery rule which might abort out of the
@code{hex} construct or might not, depending on circumstances?  There is no
way you can write the action to determine whether a @code{hex} construct is
being aborted or not.  So if you are using a lexical tie-in, you had better
make sure your error recovery rules are not of this kind.  Each rule must
be such that you can be sure that it always will, or always won't, have to
clear the flag.

@c ================================================== Debugging Your Parser

@node Debugging
@chapter Debugging Your Parser

Developing a parser can be a challenge, especially if you don't understand
the algorithm (@pxref{Algorithm, ,The Bison Parser Algorithm}).  This
chapter explains how understand and debug a parser.

The first sections focus on the static part of the parser: its structure.
They explain how to generate and read the detailed description of the
automaton.  There are several formats available:
@itemize @minus
@item
as text, see @ref{Understanding, , Understanding Your Parser};

@item
as a graph, see @ref{Graphviz,, Visualizing Your Parser};

@item
or as a markup report that can be turned, for instance, into HTML, see
@ref{Xml,, Visualizing your parser in multiple formats}.
@end itemize

The last section focuses on the dynamic part of the parser: how to enable
and understand the parser run-time traces (@pxref{Tracing, ,Tracing Your
Parser}).

@menu
* Understanding::     Understanding the structure of your parser.
* Graphviz::          Getting a visual representation of the parser.
* Xml::               Getting a markup representation of the parser.
* Tracing::           Tracing the execution of your parser.
@end menu

@node Understanding
@section Understanding Your Parser

As documented elsewhere (@pxref{Algorithm, ,The Bison Parser Algorithm})
Bison parsers are @dfn{shift/reduce automata}.  In some cases (much more
frequent than one would hope), looking at this automaton is required to
tune or simply fix a parser.

The textual file is generated when the options @option{--report} or
@option{--verbose} are specified, see @ref{Invocation, , Invoking
Bison}.  Its name is made by removing @samp{.tab.c} or @samp{.c} from
the parser implementation file name, and adding @samp{.output}
instead.  Therefore, if the grammar file is @file{foo.y}, then the
parser implementation file is called @file{foo.tab.c} by default.  As
a consequence, the verbose output file is called @file{foo.output}.

The following grammar file, @file{calc.y}, will be used in the sequel:

@example
%token NUM STR
@group
%left '+' '-'
%left '*'
@end group
%%
@group
exp:
  exp '+' exp
| exp '-' exp
| exp '*' exp
| exp '/' exp
| NUM
;
@end group
useless: STR;
%%
@end example

@command{bison} reports:

@example
calc.y: warning: 1 nonterminal useless in grammar
calc.y: warning: 1 rule useless in grammar
calc.y:12.1-7: warning: nonterminal useless in grammar: useless
calc.y:12.10-12: warning: rule useless in grammar: useless: STR
calc.y: conflicts: 7 shift/reduce
@end example

When given @option{--report=state}, in addition to @file{calc.tab.c}, it
creates a file @file{calc.output} with contents detailed below.  The
order of the output and the exact presentation might vary, but the
interpretation is the same.

@noindent
@cindex token, useless
@cindex useless token
@cindex nonterminal, useless
@cindex useless nonterminal
@cindex rule, useless
@cindex useless rule
The first section reports useless tokens, nonterminals and rules.  Useless
nonterminals and rules are removed in order to produce a smaller parser, but
useless tokens are preserved, since they might be used by the scanner (note
the difference between ``useless'' and ``unused'' below):

@example
Nonterminals useless in grammar
   useless

Terminals unused in grammar
   STR

Rules useless in grammar
    6 useless: STR
@end example

@noindent
The next section lists states that still have conflicts.

@example
State 8 conflicts: 1 shift/reduce
State 9 conflicts: 1 shift/reduce
State 10 conflicts: 1 shift/reduce
State 11 conflicts: 4 shift/reduce
@end example

@noindent
Then Bison reproduces the exact grammar it used:

@example
Grammar

    0 $accept: exp $end

    1 exp: exp '+' exp
    2    | exp '-' exp
    3    | exp '*' exp
    4    | exp '/' exp
    5    | NUM
@end example

@noindent
and reports the uses of the symbols:

@example
@group
Terminals, with rules where they appear

$end (0) 0
'*' (42) 3
'+' (43) 1
'-' (45) 2
'/' (47) 4
error (256)
NUM (258) 5
STR (259)
@end group

@group
Nonterminals, with rules where they appear

$accept (9)
    on left: 0
exp (10)
    on left: 1 2 3 4 5, on right: 0 1 2 3 4
@end group
@end example

@noindent
@cindex item
@cindex pointed rule
@cindex rule, pointed
Bison then proceeds onto the automaton itself, describing each state
with its set of @dfn{items}, also known as @dfn{pointed rules}.  Each
item is a production rule together with a point (@samp{.}) marking
the location of the input cursor.

@example
State 0

    0 $accept: . exp $end

    NUM  shift, and go to state 1

    exp  go to state 2
@end example

This reads as follows: ``state 0 corresponds to being at the very
beginning of the parsing, in the initial rule, right before the start
symbol (here, @code{exp}).  When the parser returns to this state right
after having reduced a rule that produced an @code{exp}, the control
flow jumps to state 2.  If there is no such transition on a nonterminal
symbol, and the lookahead is a @code{NUM}, then this token is shifted onto
the parse stack, and the control flow jumps to state 1.  Any other
lookahead triggers a syntax error.''

@cindex core, item set
@cindex item set core
@cindex kernel, item set
@cindex item set core
Even though the only active rule in state 0 seems to be rule 0, the
report lists @code{NUM} as a lookahead token because @code{NUM} can be
at the beginning of any rule deriving an @code{exp}.  By default Bison
reports the so-called @dfn{core} or @dfn{kernel} of the item set, but if
you want to see more detail you can invoke @command{bison} with
@option{--report=itemset} to list the derived items as well:

@example
State 0

    0 $accept: . exp $end
    1 exp: . exp '+' exp
    2    | . exp '-' exp
    3    | . exp '*' exp
    4    | . exp '/' exp
    5    | . NUM

    NUM  shift, and go to state 1

    exp  go to state 2
@end example

@noindent
In the state 1@dots{}

@example
State 1

    5 exp: NUM .

    $default  reduce using rule 5 (exp)
@end example

@noindent
the rule 5, @samp{exp: NUM;}, is completed.  Whatever the lookahead token
(@samp{$default}), the parser will reduce it.  If it was coming from
State 0, then, after this reduction it will return to state 0, and will
jump to state 2 (@samp{exp: go to state 2}).

@example
State 2

    0 $accept: exp . $end
    1 exp: exp . '+' exp
    2    | exp . '-' exp
    3    | exp . '*' exp
    4    | exp . '/' exp

    $end  shift, and go to state 3
    '+'   shift, and go to state 4
    '-'   shift, and go to state 5
    '*'   shift, and go to state 6
    '/'   shift, and go to state 7
@end example

@noindent
In state 2, the automaton can only shift a symbol.  For instance,
because of the item @samp{exp: exp . '+' exp}, if the lookahead is
@samp{+} it is shifted onto the parse stack, and the automaton
jumps to state 4, corresponding to the item @samp{exp: exp '+' . exp}.
Since there is no default action, any lookahead not listed triggers a syntax
error.

@cindex accepting state
The state 3 is named the @dfn{final state}, or the @dfn{accepting
state}:

@example
State 3

    0 $accept: exp $end .

    $default  accept
@end example

@noindent
the initial rule is completed (the start symbol and the end-of-input were
read), the parsing exits successfully.

The interpretation of states 4 to 7 is straightforward, and is left to
the reader.

@example
State 4

    1 exp: exp '+' . exp

    NUM  shift, and go to state 1

    exp  go to state 8


State 5

    2 exp: exp '-' . exp

    NUM  shift, and go to state 1

    exp  go to state 9


State 6

    3 exp: exp '*' . exp

    NUM  shift, and go to state 1

    exp  go to state 10


State 7

    4 exp: exp '/' . exp

    NUM  shift, and go to state 1

    exp  go to state 11
@end example

As was announced in beginning of the report, @samp{State 8 conflicts:
1 shift/reduce}:

@example
State 8

    1 exp: exp . '+' exp
    1    | exp '+' exp .
    2    | exp . '-' exp
    3    | exp . '*' exp
    4    | exp . '/' exp

    '*'  shift, and go to state 6
    '/'  shift, and go to state 7

    '/'       [reduce using rule 1 (exp)]
    $default  reduce using rule 1 (exp)
@end example

Indeed, there are two actions associated to the lookahead @samp{/}:
either shifting (and going to state 7), or reducing rule 1.  The
conflict means that either the grammar is ambiguous, or the parser lacks
information to make the right decision.  Indeed the grammar is
ambiguous, as, since we did not specify the precedence of @samp{/}, the
sentence @samp{NUM + NUM / NUM} can be parsed as @samp{NUM + (NUM /
NUM)}, which corresponds to shifting @samp{/}, or as @samp{(NUM + NUM) /
NUM}, which corresponds to reducing rule 1.

Because in deterministic parsing a single decision can be made, Bison
arbitrarily chose to disable the reduction, see @ref{Shift/Reduce, ,
Shift/Reduce Conflicts}.  Discarded actions are reported between
square brackets.

Note that all the previous states had a single possible action: either
shifting the next token and going to the corresponding state, or
reducing a single rule.  In the other cases, i.e., when shifting
@emph{and} reducing is possible or when @emph{several} reductions are
possible, the lookahead is required to select the action.  State 8 is
one such state: if the lookahead is @samp{*} or @samp{/} then the action
is shifting, otherwise the action is reducing rule 1.  In other words,
the first two items, corresponding to rule 1, are not eligible when the
lookahead token is @samp{*}, since we specified that @samp{*} has higher
precedence than @samp{+}.  More generally, some items are eligible only
with some set of possible lookahead tokens.  When run with
@option{--report=lookahead}, Bison specifies these lookahead tokens:

@example
State 8

    1 exp: exp . '+' exp
    1    | exp '+' exp .  [$end, '+', '-', '/']
    2    | exp . '-' exp
    3    | exp . '*' exp
    4    | exp . '/' exp

    '*'  shift, and go to state 6
    '/'  shift, and go to state 7

    '/'       [reduce using rule 1 (exp)]
    $default  reduce using rule 1 (exp)
@end example

Note however that while @samp{NUM + NUM / NUM} is ambiguous (which results in
the conflicts on @samp{/}), @samp{NUM + NUM * NUM} is not: the conflict was
solved thanks to associativity and precedence directives.  If invoked with
@option{--report=solved}, Bison includes information about the solved
conflicts in the report:

@example
Conflict between rule 1 and token '+' resolved as reduce (%left '+').
Conflict between rule 1 and token '-' resolved as reduce (%left '-').
Conflict between rule 1 and token '*' resolved as shift ('+' < '*').
@end example


The remaining states are similar:

@example
@group
State 9

    1 exp: exp . '+' exp
    2    | exp . '-' exp
    2    | exp '-' exp .
    3    | exp . '*' exp
    4    | exp . '/' exp

    '*'  shift, and go to state 6
    '/'  shift, and go to state 7

    '/'       [reduce using rule 2 (exp)]
    $default  reduce using rule 2 (exp)
@end group

@group
State 10

    1 exp: exp . '+' exp
    2    | exp . '-' exp
    3    | exp . '*' exp
    3    | exp '*' exp .
    4    | exp . '/' exp

    '/'  shift, and go to state 7

    '/'       [reduce using rule 3 (exp)]
    $default  reduce using rule 3 (exp)
@end group

@group
State 11

    1 exp: exp . '+' exp
    2    | exp . '-' exp
    3    | exp . '*' exp
    4    | exp . '/' exp
    4    | exp '/' exp .

    '+'  shift, and go to state 4
    '-'  shift, and go to state 5
    '*'  shift, and go to state 6
    '/'  shift, and go to state 7

    '+'       [reduce using rule 4 (exp)]
    '-'       [reduce using rule 4 (exp)]
    '*'       [reduce using rule 4 (exp)]
    '/'       [reduce using rule 4 (exp)]
    $default  reduce using rule 4 (exp)
@end group
@end example

@noindent
Observe that state 11 contains conflicts not only due to the lack of
precedence of @samp{/} with respect to @samp{+}, @samp{-}, and @samp{*}, but
also because the associativity of @samp{/} is not specified.

Bison may also produce an HTML version of this output, via an XML file and
XSLT processing (@pxref{Xml,,Visualizing your parser in multiple formats}).

@c ================================================= Graphical Representation

@node Graphviz
@section Visualizing Your Parser
@cindex dot

As another means to gain better understanding of the shift/reduce
automaton corresponding to the Bison parser, a DOT file can be generated. Note
that debugging a real grammar with this is tedious at best, and impractical
most of the times, because the generated files are huge (the generation of
a PDF or PNG file from it will take very long, and more often than not it will
fail due to memory exhaustion). This option was rather designed for beginners,
to help them understand LR parsers.

This file is generated when the @option{--graph} option is specified
(@pxref{Invocation, , Invoking Bison}).  Its name is made by removing
@samp{.tab.c} or @samp{.c} from the parser implementation file name, and
adding @samp{.dot} instead.  If the grammar file is @file{foo.y}, the
Graphviz output file is called @file{foo.dot}.  A DOT file may also be
produced via an XML file and XSLT processing (@pxref{Xml,,Visualizing your
parser in multiple formats}).


The following grammar file, @file{rr.y}, will be used in the sequel:

@example
%%
@group
exp: a ";" | b ".";
a: "0";
b: "0";
@end group
@end example

The graphical output
@ifnotinfo
(see @ref{fig:graph})
@end ifnotinfo
is very similar to the textual one, and as such it is easier understood by
making direct comparisons between them.  @xref{Debugging, , Debugging Your
Parser}, for a detailled analysis of the textual report.

@ifnotinfo
@float Figure,fig:graph
@image{figs/example, 430pt}
@caption{A graphical rendering of the parser.}
@end float
@end ifnotinfo

@subheading Graphical Representation of States

The items (pointed rules) for each state are grouped together in graph nodes.
Their numbering is the same as in the verbose file. See the following points,
about transitions, for examples

When invoked with @option{--report=lookaheads}, the lookahead tokens, when
needed, are shown next to the relevant rule between square brackets as a
comma separated list. This is the case in the figure for the representation of
reductions, below.

@sp 1

The transitions are represented as directed edges between the current and
the target states.

@subheading Graphical Representation of Shifts

Shifts are shown as solid arrows, labelled with the lookahead token for that
shift. The following describes a reduction in the @file{rr.output} file:

@example
@group
State 3

    1 exp: a . ";"

    ";"  shift, and go to state 6
@end group
@end example

A Graphviz rendering of this portion of the graph could be:

@center @image{figs/example-shift, 100pt}

@subheading Graphical Representation of Reductions

Reductions are shown as solid arrows, leading to a diamond-shaped node
bearing the number of the reduction rule. The arrow is labelled with the
appropriate comma separated lookahead tokens. If the reduction is the default
action for the given state, there is no such label.

This is how reductions are represented in the verbose file @file{rr.output}:
@example
State 1

    3 a: "0" .  [";"]
    4 b: "0" .  ["."]

    "."       reduce using rule 4 (b)
    $default  reduce using rule 3 (a)
@end example

A Graphviz rendering of this portion of the graph could be:

@center @image{figs/example-reduce, 120pt}

When unresolved conflicts are present, because in deterministic parsing
a single decision can be made, Bison can arbitrarily choose to disable a
reduction, see @ref{Shift/Reduce, , Shift/Reduce Conflicts}.  Discarded actions
are distinguished by a red filling color on these nodes, just like how they are
reported between square brackets in the verbose file.

The reduction corresponding to the rule number 0 is the acceptation
state. It is shown as a blue diamond, labelled ``Acc''.

@subheading Graphical representation of go tos

The @samp{go to} jump transitions are represented as dotted lines bearing
the name of the rule being jumped to.

@c ================================================= XML

@node Xml
@section Visualizing your parser in multiple formats
@cindex xml

Bison supports two major report formats: textual output
(@pxref{Understanding, ,Understanding Your Parser}) when invoked
with option @option{--verbose}, and DOT
(@pxref{Graphviz,, Visualizing Your Parser}) when invoked with
option @option{--graph}. However,
another alternative is to output an XML file that may then be, with
@command{xsltproc}, rendered as either a raw text format equivalent to the
verbose file, or as an HTML version of the same file, with clickable
transitions, or even as a DOT. The @file{.output} and DOT files obtained via
XSLT have no difference whatsoever with those obtained by invoking
@command{bison} with options @option{--verbose} or @option{--graph}.

The XML file is generated when the options @option{-x} or
@option{--xml[=FILE]} are specified, see @ref{Invocation,,Invoking Bison}.
If not specified, its name is made by removing @samp{.tab.c} or @samp{.c}
from the parser implementation file name, and adding @samp{.xml} instead.
For instance, if the grammar file is @file{foo.y}, the default XML output
file is @file{foo.xml}.

Bison ships with a @file{data/xslt} directory, containing XSL Transformation
files to apply to the XML file. Their names are non-ambiguous:

@table @file
@item xml2dot.xsl
Used to output a copy of the DOT visualization of the automaton.
@item xml2text.xsl
Used to output a copy of the @samp{.output} file.
@item xml2xhtml.xsl
Used to output an xhtml enhancement of the @samp{.output} file.
@end table

Sample usage (requires @command{xsltproc}):
@example
$ bison -x gr.y
@group
$ bison --print-datadir
/usr/local/share/bison
@end group
$ xsltproc /usr/local/share/bison/xslt/xml2xhtml.xsl gr.xml >gr.html
@end example

@c ================================================= Tracing

@node Tracing
@section Tracing Your Parser
@findex yydebug
@cindex debugging
@cindex tracing the parser

When a Bison grammar compiles properly but parses ``incorrectly'', the
@code{yydebug} parser-trace feature helps figuring out why.

@menu
* Enabling Traces::    Activating run-time trace support
* Mfcalc Traces::      Extending @code{mfcalc} to support traces
* The YYPRINT Macro::  Obsolete interface for semantic value reports
@end menu

@node Enabling Traces
@subsection  Enabling Traces
There are several means to enable compilation of trace facilities:

@table @asis
@item the macro @code{YYDEBUG}
@findex YYDEBUG
Define the macro @code{YYDEBUG} to a nonzero value when you compile the
parser.  This is compliant with POSIX Yacc.  You could use
@samp{-DYYDEBUG=1} as a compiler option or you could put @samp{#define
YYDEBUG 1} in the prologue of the grammar file (@pxref{Prologue, , The
Prologue}).

If the @code{%define} variable @code{api.prefix} is used (@pxref{Multiple
Parsers, ,Multiple Parsers in the Same Program}), for instance @samp{%define
api.prefix x}, then if @code{CDEBUG} is defined, its value controls the
tracing feature (enabled if and only if nonzero); otherwise tracing is
enabled if and only if @code{YYDEBUG} is nonzero.

@item the option @option{-t} (POSIX Yacc compliant)
@itemx the option @option{--debug} (Bison extension)
Use the @samp{-t} option when you run Bison (@pxref{Invocation, ,Invoking
Bison}).  With @samp{%define api.prefix c}, it defines @code{CDEBUG} to 1,
otherwise it defines @code{YYDEBUG} to 1.

@item the directive @samp{%debug}
@findex %debug
Add the @code{%debug} directive (@pxref{Decl Summary, ,Bison Declaration
Summary}).  This Bison extension is maintained for backward
compatibility with previous versions of Bison.

@item the variable @samp{parse.trace}
@findex %define parse.trace
Add the @samp{%define parse.trace} directive (@pxref{%define
Summary,,parse.trace}), or pass the @option{-Dparse.trace} option
(@pxref{Bison Options}).  This is a Bison extension, which is especially
useful for languages that don't use a preprocessor.  Unless POSIX and Yacc
portability matter to you, this is the preferred solution.
@end table

We suggest that you always enable the trace option so that debugging is
always possible.

@findex YYFPRINTF
The trace facility outputs messages with macro calls of the form
@code{YYFPRINTF (stderr, @var{format}, @var{args})} where
@var{format} and @var{args} are the usual @code{printf} format and variadic
arguments.  If you define @code{YYDEBUG} to a nonzero value but do not
define @code{YYFPRINTF}, @code{<stdio.h>} is automatically included
and @code{YYFPRINTF} is defined to @code{fprintf}.

Once you have compiled the program with trace facilities, the way to
request a trace is to store a nonzero value in the variable @code{yydebug}.
You can do this by making the C code do it (in @code{main}, perhaps), or
you can alter the value with a C debugger.

Each step taken by the parser when @code{yydebug} is nonzero produces a
line or two of trace information, written on @code{stderr}.  The trace
messages tell you these things:

@itemize @bullet
@item
Each time the parser calls @code{yylex}, what kind of token was read.

@item
Each time a token is shifted, the depth and complete contents of the
state stack (@pxref{Parser States}).

@item
Each time a rule is reduced, which rule it is, and the complete contents
of the state stack afterward.
@end itemize

To make sense of this information, it helps to refer to the automaton
description file (@pxref{Understanding, ,Understanding Your Parser}).
This file shows the meaning of each state in terms of
positions in various rules, and also what each state will do with each
possible input token.  As you read the successive trace messages, you
can see that the parser is functioning according to its specification in
the listing file.  Eventually you will arrive at the place where
something undesirable happens, and you will see which parts of the
grammar are to blame.

The parser implementation file is a C/C++/Java program and you can use
debuggers on it, but it's not easy to interpret what it is doing.  The
parser function is a finite-state machine interpreter, and aside from
the actions it executes the same code over and over.  Only the values
of variables show where in the grammar it is working.

@node Mfcalc Traces
@subsection Enabling Debug Traces for @code{mfcalc}

The debugging information normally gives the token type of each token read,
but not its semantic value.  The @code{%printer} directive allows specify
how semantic values are reported, see @ref{Printer Decl, , Printing
Semantic Values}.  For backward compatibility, Yacc like C parsers may also
use the @code{YYPRINT} (@pxref{The YYPRINT Macro, , The @code{YYPRINT}
Macro}), but its use is discouraged.

As a demonstration of @code{%printer}, consider the multi-function
calculator, @code{mfcalc} (@pxref{Multi-function Calc}).  To enable run-time
traces, and semantic value reports, insert the following directives in its
prologue:

@comment file: mfcalc.y: 2
@example
/* Generate the parser description file.  */
%verbose
/* Enable run-time traces (yydebug).  */
%define parse.trace

/* Formatting semantic values.  */
%printer @{ fprintf (yyoutput, "%s", $$->name); @} VAR;
%printer @{ fprintf (yyoutput, "%s()", $$->name); @} FNCT;
%printer @{ fprintf (yyoutput, "%g", $$); @} <double>;
@end example

The @code{%define} directive instructs Bison to generate run-time trace
support.  Then, activation of these traces is controlled at run-time by the
@code{yydebug} variable, which is disabled by default.  Because these traces
will refer to the ``states'' of the parser, it is helpful to ask for the
creation of a description of that parser; this is the purpose of (admittedly
ill-named) @code{%verbose} directive.

The set of @code{%printer} directives demonstrates how to format the
semantic value in the traces.  Note that the specification can be done
either on the symbol type (e.g., @code{VAR} or @code{FNCT}), or on the type
tag: since @code{<double>} is the type for both @code{NUM} and @code{exp},
this printer will be used for them.

Here is a sample of the information provided by run-time traces.  The traces
are sent onto standard error.

@example
$ @kbd{echo 'sin(1-1)' | ./mfcalc -p}
Starting parse
Entering state 0
Reducing stack by rule 1 (line 34):
-> $$ = nterm input ()
Stack now 0
Entering state 1
@end example

@noindent
This first batch shows a specific feature of this grammar: the first rule
(which is in line 34 of @file{mfcalc.y} can be reduced without even having
to look for the first token.  The resulting left-hand symbol (@code{$$}) is
a valueless (@samp{()}) @code{input} non terminal (@code{nterm}).

Then the parser calls the scanner.
@example
Reading a token: Next token is token FNCT (sin())
Shifting token FNCT (sin())
Entering state 6
@end example

@noindent
That token (@code{token}) is a function (@code{FNCT}) whose value is
@samp{sin} as formatted per our @code{%printer} specification: @samp{sin()}.
The parser stores (@code{Shifting}) that token, and others, until it can do
something about it.

@example
Reading a token: Next token is token '(' ()
Shifting token '(' ()
Entering state 14
Reading a token: Next token is token NUM (1.000000)
Shifting token NUM (1.000000)
Entering state 4
Reducing stack by rule 6 (line 44):
   $1 = token NUM (1.000000)
-> $$ = nterm exp (1.000000)
Stack now 0 1 6 14
Entering state 24
@end example

@noindent
The previous reduction demonstrates the @code{%printer} directive for
@code{<double>}: both the token @code{NUM} and the resulting nonterminal
@code{exp} have @samp{1} as value.

@example
Reading a token: Next token is token '-' ()
Shifting token '-' ()
Entering state 17
Reading a token: Next token is token NUM (1.000000)
Shifting token NUM (1.000000)
Entering state 4
Reducing stack by rule 6 (line 44):
   $1 = token NUM (1.000000)
-> $$ = nterm exp (1.000000)
Stack now 0 1 6 14 24 17
Entering state 26
Reading a token: Next token is token ')' ()
Reducing stack by rule 11 (line 49):
   $1 = nterm exp (1.000000)
   $2 = token '-' ()
   $3 = nterm exp (1.000000)
-> $$ = nterm exp (0.000000)
Stack now 0 1 6 14
Entering state 24
@end example

@noindent
The rule for the subtraction was just reduced.  The parser is about to
discover the end of the call to @code{sin}.

@example
Next token is token ')' ()
Shifting token ')' ()
Entering state 31
Reducing stack by rule 9 (line 47):
   $1 = token FNCT (sin())
   $2 = token '(' ()
   $3 = nterm exp (0.000000)
   $4 = token ')' ()
-> $$ = nterm exp (0.000000)
Stack now 0 1
Entering state 11
@end example

@noindent
Finally, the end-of-line allow the parser to complete the computation, and
display its result.

@example
Reading a token: Next token is token '\n' ()
Shifting token '\n' ()
Entering state 22
Reducing stack by rule 4 (line 40):
   $1 = nterm exp (0.000000)
   $2 = token '\n' ()
@result{} 0
-> $$ = nterm line ()
Stack now 0 1
Entering state 10
Reducing stack by rule 2 (line 35):
   $1 = nterm input ()
   $2 = nterm line ()
-> $$ = nterm input ()
Stack now 0
Entering state 1
@end example

The parser has returned into state 1, in which it is waiting for the next
expression to evaluate, or for the end-of-file token, which causes the
completion of the parsing.

@example
Reading a token: Now at end of input.
Shifting token $end ()
Entering state 2
Stack now 0 1 2
Cleanup: popping token $end ()
Cleanup: popping nterm input ()
@end example


@node The YYPRINT Macro
@subsection The @code{YYPRINT} Macro

@findex YYPRINT
Before @code{%printer} support, semantic values could be displayed using the
@code{YYPRINT} macro, which works only for terminal symbols and only with
the @file{yacc.c} skeleton.

@deffn {Macro} YYPRINT (@var{stream}, @var{token}, @var{value});
@findex YYPRINT
If you define @code{YYPRINT}, it should take three arguments.  The parser
will pass a standard I/O stream, the numeric code for the token type, and
the token value (from @code{yylval}).

For @file{yacc.c} only.  Obsoleted by @code{%printer}.
@end deffn

Here is an example of @code{YYPRINT} suitable for the multi-function
calculator (@pxref{Mfcalc Declarations, ,Declarations for @code{mfcalc}}):

@example
%@{
  static void print_token_value (FILE *, int, YYSTYPE);
  #define YYPRINT(File, Type, Value)            \
    print_token_value (File, Type, Value)
%@}

@dots{} %% @dots{} %% @dots{}

static void
print_token_value (FILE *file, int type, YYSTYPE value)
@{
  if (type == VAR)
    fprintf (file, "%s", value.tptr->name);
  else if (type == NUM)
    fprintf (file, "%d", value.val);
@}
@end example

@c ================================================= Invoking Bison

@node Invocation
@chapter Invoking Bison
@cindex invoking Bison
@cindex Bison invocation
@cindex options for invoking Bison

The usual way to invoke Bison is as follows:

@example
bison @var{infile}
@end example

Here @var{infile} is the grammar file name, which usually ends in
@samp{.y}.  The parser implementation file's name is made by replacing
the @samp{.y} with @samp{.tab.c} and removing any leading directory.
Thus, the @samp{bison foo.y} file name yields @file{foo.tab.c}, and
the @samp{bison hack/foo.y} file name yields @file{foo.tab.c}.  It's
also possible, in case you are writing C++ code instead of C in your
grammar file, to name it @file{foo.ypp} or @file{foo.y++}.  Then, the
output files will take an extension like the given one as input
(respectively @file{foo.tab.cpp} and @file{foo.tab.c++}).  This
feature takes effect with all options that manipulate file names like
@samp{-o} or @samp{-d}.

For example :

@example
bison -d @var{infile.yxx}
@end example
@noindent
will produce @file{infile.tab.cxx} and @file{infile.tab.hxx}, and

@example
bison -d -o @var{output.c++} @var{infile.y}
@end example
@noindent
will produce @file{output.c++} and @file{outfile.h++}.

For compatibility with POSIX, the standard Bison
distribution also contains a shell script called @command{yacc} that
invokes Bison with the @option{-y} option.

@menu
* Bison Options::     All the options described in detail,
                        in alphabetical order by short options.
* Option Cross Key::  Alphabetical list of long options.
* Yacc Library::      Yacc-compatible @code{yylex} and @code{main}.
@end menu

@node Bison Options
@section Bison Options

Bison supports both traditional single-letter options and mnemonic long
option names.  Long option names are indicated with @samp{--} instead of
@samp{-}.  Abbreviations for option names are allowed as long as they
are unique.  When a long option takes an argument, like
@samp{--file-prefix}, connect the option name and the argument with
@samp{=}.

Here is a list of options that can be used with Bison, alphabetized by
short option.  It is followed by a cross key alphabetized by long
option.

@c Please, keep this ordered as in 'bison --help'.
@noindent
Operations modes:
@table @option
@item -h
@itemx --help
Print a summary of the command-line options to Bison and exit.

@item -V
@itemx --version
Print the version number of Bison and exit.

@item --print-localedir
Print the name of the directory containing locale-dependent data.

@item --print-datadir
Print the name of the directory containing skeletons and XSLT.

@item -y
@itemx --yacc
Act more like the traditional Yacc command.  This can cause different
diagnostics to be generated, and may change behavior in other minor
ways.  Most importantly, imitate Yacc's output file name conventions,
so that the parser implementation file is called @file{y.tab.c}, and
the other outputs are called @file{y.output} and @file{y.tab.h}.
Also, if generating a deterministic parser in C, generate
@code{#define} statements in addition to an @code{enum} to associate
token numbers with token names.  Thus, the following shell script can
substitute for Yacc, and the Bison distribution contains such a script
for compatibility with POSIX:

@example
#! /bin/sh
bison -y "$@@"
@end example

The @option{-y}/@option{--yacc} option is intended for use with
traditional Yacc grammars.  If your grammar uses a Bison extension
like @samp{%glr-parser}, Bison might not be Yacc-compatible even if
this option is specified.

@item -W [@var{category}]
@itemx --warnings[=@var{category}]
Output warnings falling in @var{category}.  @var{category} can be one
of:
@table @code
@item midrule-values
Warn about mid-rule values that are set but not used within any of the actions
of the parent rule.
For example, warn about unused @code{$2} in:

@example
exp: '1' @{ $$ = 1; @} '+' exp @{ $$ = $1 + $4; @};
@end example

Also warn about mid-rule values that are used but not set.
For example, warn about unset @code{$$} in the mid-rule action in:

@example
exp: '1' @{ $1 = 1; @} '+' exp @{ $$ = $2 + $4; @};
@end example

These warnings are not enabled by default since they sometimes prove to
be false alarms in existing grammars employing the Yacc constructs
@code{$0} or @code{$-@var{n}} (where @var{n} is some positive integer).

@item yacc
Incompatibilities with POSIX Yacc.

@item conflicts-sr
@itemx conflicts-rr
S/R and R/R conflicts.  These warnings are enabled by default.  However, if
the @code{%expect} or @code{%expect-rr} directive is specified, an
unexpected number of conflicts is an error, and an expected number of
conflicts is not reported, so @option{-W} and @option{--warning} then have
no effect on the conflict report.

@item deprecated
Deprecated constructs whose support will be removed in future versions of
Bison.

@item empty-rule
Empty rules without @code{%empty}.  @xref{Empty Rules}.  Disabled by
default, but enabled by uses of @code{%empty}, unless
@option{-Wno-empty-rule} was specified.

@item precedence
Useless precedence and associativity directives.  Disabled by default.

Consider for instance the following grammar:

@example
@group
%nonassoc "="
%left "+"
%left "*"
%precedence "("
@end group
%%
@group
stmt:
  exp
| "var" "=" exp
;
@end group

@group
exp:
  exp "+" exp
| exp "*" "num"
| "(" exp ")"
| "num"
;
@end group
@end example

Bison reports:

@c cannot leave the location and the [-Wprecedence] for lack of
@c width in PDF.
@example
@group
warning: useless precedence and associativity for "="
 %nonassoc "="
           ^^^
@end group
@group
warning: useless associativity for "*", use %precedence
 %left "*"
       ^^^
@end group
@group
warning: useless precedence for "("
 %precedence "("
             ^^^
@end group
@end example

One would get the exact same parser with the following directives instead:

@example
@group
%left "+"
%precedence "*"
@end group
@end example

@item other
All warnings not categorized above.  These warnings are enabled by default.

This category is provided merely for the sake of completeness.  Future
releases of Bison may move warnings from this category to new, more specific
categories.

@item all
All the warnings except @code{yacc}.

@item none
Turn off all the warnings.

@item error
See @option{-Werror}, below.
@end table

A category can be turned off by prefixing its name with @samp{no-}.  For
instance, @option{-Wno-yacc} will hide the warnings about
POSIX Yacc incompatibilities.

@item -Werror[=@var{category}]
@itemx -Wno-error[=@var{category}]
Enable warnings falling in @var{category}, and treat them as errors.  If no
@var{category} is given, it defaults to making all enabled warnings into errors.

@var{category} is the same as for @option{--warnings}, with the exception that
it may not be prefixed with @samp{no-} (see above).

Prefixed with @samp{no}, it deactivates the error treatment for this
@var{category}. However, the warning itself won't be disabled, or enabled, by
this option.

Note that the precedence of the @samp{=} and @samp{,} operators is such that
the following commands are @emph{not} equivalent, as the first will not treat
S/R conflicts as errors.

@example
$ bison -Werror=yacc,conflicts-sr input.y
$ bison -Werror=yacc,error=conflicts-sr input.y
@end example

@item -f [@var{feature}]
@itemx --feature[=@var{feature}]
Activate miscellaneous @var{feature}. @var{feature} can be one of:
@table @code
@item caret
@itemx diagnostics-show-caret
Show caret errors, in a manner similar to GCC's
@option{-fdiagnostics-show-caret}, or Clang's @option{-fcaret-diagnotics}. The
location provided with the message is used to quote the corresponding line of
the source file, underlining the important part of it with carets (^). Here is
an example, using the following file @file{in.y}:

@example
%type <ival> exp
%%
exp: exp '+' exp @{ $exp = $1 + $2; @};
@end example

When invoked with @option{-fcaret} (or nothing), Bison will report:

@example
@group
in.y:3.20-23: error: ambiguous reference: '$exp'
 exp: exp '+' exp @{ $exp = $1 + $2; @};
                    ^^^^
@end group
@group
in.y:3.1-3:       refers to: $exp at $$
 exp: exp '+' exp @{ $exp = $1 + $2; @};
 ^^^
@end group
@group
in.y:3.6-8:       refers to: $exp at $1
 exp: exp '+' exp @{ $exp = $1 + $2; @};
      ^^^
@end group
@group
in.y:3.14-16:     refers to: $exp at $3
 exp: exp '+' exp @{ $exp = $1 + $2; @};
              ^^^
@end group
@group
in.y:3.32-33: error: $2 of 'exp' has no declared type
 exp: exp '+' exp @{ $exp = $1 + $2; @};
                                ^^
@end group
@end example

Whereas, when invoked with @option{-fno-caret}, Bison will only report:

@example
@group
in.y:3.20-23: error: ambiguous reference: ‘$exp’
in.y:3.1-3:       refers to: $exp at $$
in.y:3.6-8:       refers to: $exp at $1
in.y:3.14-16:     refers to: $exp at $3
in.y:3.32-33: error: $2 of ‘exp’ has no declared type
@end group
@end example

This option is activated by default.

@end table
@end table

@noindent
Tuning the parser:

@table @option
@item -t
@itemx --debug
In the parser implementation file, define the macro @code{YYDEBUG} to
1 if it is not already defined, so that the debugging facilities are
compiled.  @xref{Tracing, ,Tracing Your Parser}.

@item -D @var{name}[=@var{value}]
@itemx --define=@var{name}[=@var{value}]
@itemx -F @var{name}[=@var{value}]
@itemx --force-define=@var{name}[=@var{value}]
Each of these is equivalent to @samp{%define @var{name} "@var{value}"}
(@pxref{%define Summary}) except that Bison processes multiple
definitions for the same @var{name} as follows:

@itemize
@item
Bison quietly ignores all command-line definitions for @var{name} except
the last.
@item
If that command-line definition is specified by a @code{-D} or
@code{--define}, Bison reports an error for any @code{%define}
definition for @var{name}.
@item
If that command-line definition is specified by a @code{-F} or
@code{--force-define} instead, Bison quietly ignores all @code{%define}
definitions for @var{name}.
@item
Otherwise, Bison reports an error if there are multiple @code{%define}
definitions for @var{name}.
@end itemize

You should avoid using @code{-F} and @code{--force-define} in your
make files unless you are confident that it is safe to quietly ignore
any conflicting @code{%define} that may be added to the grammar file.

@item -L @var{language}
@itemx --language=@var{language}
Specify the programming language for the generated parser, as if
@code{%language} was specified (@pxref{Decl Summary, , Bison Declaration
Summary}).  Currently supported languages include C, C++, and Java.
@var{language} is case-insensitive.

@item --locations
Pretend that @code{%locations} was specified.  @xref{Decl Summary}.

@item -p @var{prefix}
@itemx --name-prefix=@var{prefix}
Pretend that @code{%name-prefix "@var{prefix}"} was specified (@pxref{Decl
Summary}).  Obsoleted by @code{-Dapi.prefix=@var{prefix}}.  @xref{Multiple
Parsers, ,Multiple Parsers in the Same Program}.

@item -l
@itemx --no-lines
Don't put any @code{#line} preprocessor commands in the parser
implementation file.  Ordinarily Bison puts them in the parser
implementation file so that the C compiler and debuggers will
associate errors with your source file, the grammar file.  This option
causes them to associate errors with the parser implementation file,
treating it as an independent source file in its own right.

@item -S @var{file}
@itemx --skeleton=@var{file}
Specify the skeleton to use, similar to @code{%skeleton}
(@pxref{Decl Summary, , Bison Declaration Summary}).

@c You probably don't need this option unless you are developing Bison.
@c You should use @option{--language} if you want to specify the skeleton for a
@c different language, because it is clearer and because it will always
@c choose the correct skeleton for non-deterministic or push parsers.

If @var{file} does not contain a @code{/}, @var{file} is the name of a skeleton
file in the Bison installation directory.
If it does, @var{file} is an absolute file name or a file name relative to the
current working directory.
This is similar to how most shells resolve commands.

@item -k
@itemx --token-table
Pretend that @code{%token-table} was specified.  @xref{Decl Summary}.
@end table

@noindent
Adjust the output:

@table @option
@item --defines[=@var{file}]
Pretend that @code{%defines} was specified, i.e., write an extra output
file containing macro definitions for the token type names defined in
the grammar, as well as a few other declarations.  @xref{Decl Summary}.

@item -d
This is the same as @code{--defines} except @code{-d} does not accept a
@var{file} argument since POSIX Yacc requires that @code{-d} can be bundled
with other short options.

@item -b @var{file-prefix}
@itemx --file-prefix=@var{prefix}
Pretend that @code{%file-prefix} was specified, i.e., specify prefix to use
for all Bison output file names.  @xref{Decl Summary}.

@item -r @var{things}
@itemx --report=@var{things}
Write an extra output file containing verbose description of the comma
separated list of @var{things} among:

@table @code
@item state
Description of the grammar, conflicts (resolved and unresolved), and
parser's automaton.

@item itemset
Implies @code{state} and augments the description of the automaton with
the full set of items for each state, instead of its core only.

@item lookahead
Implies @code{state} and augments the description of the automaton with
each rule's lookahead set.

@item solved
Implies @code{state}.  Explain how conflicts were solved thanks to
precedence and associativity directives.

@item all
Enable all the items.

@item none
Do not generate the report.
@end table

@item --report-file=@var{file}
Specify the @var{file} for the verbose description.

@item -v
@itemx --verbose
Pretend that @code{%verbose} was specified, i.e., write an extra output
file containing verbose descriptions of the grammar and
parser.  @xref{Decl Summary}.

@item -o @var{file}
@itemx --output=@var{file}
Specify the @var{file} for the parser implementation file.

The other output files' names are constructed from @var{file} as
described under the @samp{-v} and @samp{-d} options.

@item -g [@var{file}]
@itemx --graph[=@var{file}]
Output a graphical representation of the parser's
automaton computed by Bison, in @uref{http://www.graphviz.org/, Graphviz}
@uref{http://www.graphviz.org/doc/info/lang.html, DOT} format.
@code{@var{file}} is optional.
If omitted and the grammar file is @file{foo.y}, the output file will be
@file{foo.dot}.

@item -x [@var{file}]
@itemx --xml[=@var{file}]
Output an XML report of the parser's automaton computed by Bison.
@code{@var{file}} is optional.
If omitted and the grammar file is @file{foo.y}, the output file will be
@file{foo.xml}.
(The current XML schema is experimental and may evolve.
More user feedback will help to stabilize it.)
@end table

@node Option Cross Key
@section Option Cross Key

Here is a list of options, alphabetized by long option, to help you find
the corresponding short option and directive.

@multitable {@option{--force-define=@var{name}[=@var{value}]}} {@option{-F @var{name}[=@var{value}]}} {@code{%nondeterministic-parser}}
@headitem Long Option @tab Short Option @tab Bison Directive
@include cross-options.texi
@end multitable

@node Yacc Library
@section Yacc Library

The Yacc library contains default implementations of the
@code{yyerror} and @code{main} functions.  These default
implementations are normally not useful, but POSIX requires
them.  To use the Yacc library, link your program with the
@option{-ly} option.  Note that Bison's implementation of the Yacc
library is distributed under the terms of the GNU General
Public License (@pxref{Copying}).

If you use the Yacc library's @code{yyerror} function, you should
declare @code{yyerror} as follows:

@example
int yyerror (char const *);
@end example

Bison ignores the @code{int} value returned by this @code{yyerror}.
If you use the Yacc library's @code{main} function, your
@code{yyparse} function should have the following type signature:

@example
int yyparse (void);
@end example

@c ================================================= C++ Bison

@node Other Languages
@chapter Parsers Written In Other Languages

@menu
* C++ Parsers::                 The interface to generate C++ parser classes
* Java Parsers::                The interface to generate Java parser classes
@end menu

@node C++ Parsers
@section C++ Parsers

@menu
* C++ Bison Interface::         Asking for C++ parser generation
* C++ Semantic Values::         %union vs. C++
* C++ Location Values::         The position and location classes
* C++ Parser Interface::        Instantiating and running the parser
* C++ Scanner Interface::       Exchanges between yylex and parse
* A Complete C++ Example::      Demonstrating their use
@end menu

@node C++ Bison Interface
@subsection C++ Bison Interface
@c - %skeleton "lalr1.cc"
@c - Always pure
@c - initial action

The C++ deterministic parser is selected using the skeleton directive,
@samp{%skeleton "lalr1.cc"}, or the synonymous command-line option
@option{--skeleton=lalr1.cc}.
@xref{Decl Summary}.

When run, @command{bison} will create several entities in the @samp{yy}
namespace.
@findex %define api.namespace
Use the @samp{%define api.namespace} directive to change the namespace name,
see @ref{%define Summary,,api.namespace}.  The various classes are generated
in the following files:

@table @file
@item position.hh
@itemx location.hh
The definition of the classes @code{position} and @code{location}, used for
location tracking when enabled.  These files are not generated if the
@code{%define} variable @code{api.location.type} is defined.  @xref{C++
Location Values}.

@item stack.hh
An auxiliary class @code{stack} used by the parser.

@item @var{file}.hh
@itemx @var{file}.cc
(Assuming the extension of the grammar file was @samp{.yy}.)  The
declaration and implementation of the C++ parser class.  The basename
and extension of these two files follow the same rules as with regular C
parsers (@pxref{Invocation}).

The header is @emph{mandatory}; you must either pass
@option{-d}/@option{--defines} to @command{bison}, or use the
@samp{%defines} directive.
@end table

All these files are documented using Doxygen; run @command{doxygen}
for a complete and accurate documentation.

@node C++ Semantic Values
@subsection C++ Semantic Values
@c - No objects in unions
@c - YYSTYPE
@c - Printer and destructor

Bison supports two different means to handle semantic values in C++.  One is
alike the C interface, and relies on unions (@pxref{C++ Unions}).  As C++
practitioners know, unions are inconvenient in C++, therefore another
approach is provided, based on variants (@pxref{C++ Variants}).

@menu
* C++ Unions::             Semantic values cannot be objects
* C++ Variants::           Using objects as semantic values
@end menu

@node C++ Unions
@subsubsection C++ Unions

The @code{%union} directive works as for C, see @ref{Union Decl, ,The
Union Declaration}.  In particular it produces a genuine
@code{union}, which have a few specific features in C++.
@itemize @minus
@item
The type @code{YYSTYPE} is defined but its use is discouraged: rather
you should refer to the parser's encapsulated type
@code{yy::parser::semantic_type}.
@item
Non POD (Plain Old Data) types cannot be used.  C++ forbids any
instance of classes with constructors in unions: only @emph{pointers}
to such objects are allowed.
@end itemize

Because objects have to be stored via pointers, memory is not
reclaimed automatically: using the @code{%destructor} directive is the
only means to avoid leaks.  @xref{Destructor Decl, , Freeing Discarded
Symbols}.

@node C++ Variants
@subsubsection C++ Variants

Bison provides a @emph{variant} based implementation of semantic values for
C++.  This alleviates all the limitations reported in the previous section,
and in particular, object types can be used without pointers.

To enable variant-based semantic values, set @code{%define} variable
@code{variant} (@pxref{%define Summary,, variant}).  Once this defined,
@code{%union} is ignored, and instead of using the name of the fields of the
@code{%union} to ``type'' the symbols, use genuine types.

For instance, instead of

@example
%union
@{
  int ival;
  std::string* sval;
@}
%token <ival> NUMBER;
%token <sval> STRING;
@end example

@noindent
write

@example
%token <int> NUMBER;
%token <std::string> STRING;
@end example

@code{STRING} is no longer a pointer, which should fairly simplify the user
actions in the grammar and in the scanner (in particular the memory
management).

Since C++ features destructors, and since it is customary to specialize
@code{operator<<} to support uniform printing of values, variants also
typically simplify Bison printers and destructors.

Variants are stricter than unions.  When based on unions, you may play any
dirty game with @code{yylval}, say storing an @code{int}, reading a
@code{char*}, and then storing a @code{double} in it.  This is no longer
possible with variants: they must be initialized, then assigned to, and
eventually, destroyed.

@deftypemethod {semantic_type} {T&} build<T> ()
Initialize, but leave empty.  Returns the address where the actual value may
be stored.  Requires that the variant was not initialized yet.
@end deftypemethod

@deftypemethod {semantic_type} {T&} build<T> (const T& @var{t})
Initialize, and copy-construct from @var{t}.
@end deftypemethod


@strong{Warning}: We do not use Boost.Variant, for two reasons.  First, it
appeared unacceptable to require Boost on the user's machine (i.e., the
machine on which the generated parser will be compiled, not the machine on
which @command{bison} was run).  Second, for each possible semantic value,
Boost.Variant not only stores the value, but also a tag specifying its
type.  But the parser already ``knows'' the type of the semantic value, so
that would be duplicating the information.

Therefore we developed light-weight variants whose type tag is external (so
they are really like @code{unions} for C++ actually).  But our code is much
less mature that Boost.Variant.  So there is a number of limitations in
(the current implementation of) variants:
@itemize
@item
Alignment must be enforced: values should be aligned in memory according to
the most demanding type.  Computing the smallest alignment possible requires
meta-programming techniques that are not currently implemented in Bison, and
therefore, since, as far as we know, @code{double} is the most demanding
type on all platforms, alignments are enforced for @code{double} whatever
types are actually used.  This may waste space in some cases.

@item
There might be portability issues we are not aware of.
@end itemize

As far as we know, these limitations @emph{can} be alleviated.  All it takes
is some time and/or some talented C++ hacker willing to contribute to Bison.

@node C++ Location Values
@subsection C++ Location Values
@c - %locations
@c - class Position
@c - class Location
@c - %define filename_type "const symbol::Symbol"

When the directive @code{%locations} is used, the C++ parser supports
location tracking, see @ref{Tracking Locations}.

By default, two auxiliary classes define a @code{position}, a single point
in a file, and a @code{location}, a range composed of a pair of
@code{position}s (possibly spanning several files).  But if the
@code{%define} variable @code{api.location.type} is defined, then these
classes will not be generated, and the user defined type will be used.

@tindex uint
In this section @code{uint} is an abbreviation for @code{unsigned int}: in
genuine code only the latter is used.

@menu
* C++ position::         One point in the source file
* C++ location::         Two points in the source file
* User Defined Location Type::  Required interface for locations
@end menu

@node C++ position
@subsubsection C++ @code{position}

@deftypeop {Constructor} {position} {} position (std::string* @var{file} = 0, uint @var{line} = 1, uint @var{col} = 1)
Create a @code{position} denoting a given point.  Note that @code{file} is
not reclaimed when the @code{position} is destroyed: memory managed must be
handled elsewhere.
@end deftypeop

@deftypemethod {position} {void} initialize (std::string* @var{file} = 0, uint @var{line} = 1, uint @var{col} = 1)
Reset the position to the given values.
@end deftypemethod

@deftypeivar {position} {std::string*} file
The name of the file.  It will always be handled as a pointer, the
parser will never duplicate nor deallocate it.  As an experimental
feature you may change it to @samp{@var{type}*} using @samp{%define
filename_type "@var{type}"}.
@end deftypeivar

@deftypeivar {position} {uint} line
The line, starting at 1.
@end deftypeivar

@deftypemethod {position} {uint} lines (int @var{height} = 1)
Advance by @var{height} lines, resetting the column number.
@end deftypemethod

@deftypeivar {position} {uint} column
The column, starting at 1.
@end deftypeivar

@deftypemethod {position} {uint} columns (int @var{width} = 1)
Advance by @var{width} columns, without changing the line number.
@end deftypemethod

@deftypemethod {position} {position&} operator+= (int @var{width})
@deftypemethodx {position} {position} operator+ (int @var{width})
@deftypemethodx {position} {position&} operator-= (int @var{width})
@deftypemethodx {position} {position} operator- (int @var{width})
Various forms of syntactic sugar for @code{columns}.
@end deftypemethod

@deftypemethod {position} {bool} operator== (const position& @var{that})
@deftypemethodx {position} {bool} operator!= (const position& @var{that})
Whether @code{*this} and @code{that} denote equal/different positions.
@end deftypemethod

@deftypefun {std::ostream&} operator<< (std::ostream& @var{o}, const position& @var{p})
Report @var{p} on @var{o} like this:
@samp{@var{file}:@var{line}.@var{column}}, or
@samp{@var{line}.@var{column}} if @var{file} is null.
@end deftypefun

@node C++ location
@subsubsection C++ @code{location}

@deftypeop {Constructor} {location} {} location (const position& @var{begin}, const position& @var{end})
Create a @code{Location} from the endpoints of the range.
@end deftypeop

@deftypeop {Constructor} {location} {} location (const position& @var{pos} = position())
@deftypeopx {Constructor} {location} {} location (std::string* @var{file}, uint @var{line}, uint @var{col})
Create a @code{Location} denoting an empty range located at a given point.
@end deftypeop

@deftypemethod {location} {void} initialize (std::string* @var{file} = 0, uint @var{line} = 1, uint @var{col} = 1)
Reset the location to an empty range at the given values.
@end deftypemethod

@deftypeivar {location} {position} begin
@deftypeivarx {location} {position} end
The first, inclusive, position of the range, and the first beyond.
@end deftypeivar

@deftypemethod {location} {uint} columns (int @var{width} = 1)
@deftypemethodx {location} {uint} lines (int @var{height} = 1)
Advance the @code{end} position.
@end deftypemethod

@deftypemethod {location} {location} operator+ (const location& @var{end})
@deftypemethodx {location} {location} operator+ (int @var{width})
@deftypemethodx {location} {location} operator+= (int @var{width})
Various forms of syntactic sugar.
@end deftypemethod

@deftypemethod {location} {void} step ()
Move @code{begin} onto @code{end}.
@end deftypemethod

@deftypemethod {location} {bool} operator== (const location& @var{that})
@deftypemethodx {location} {bool} operator!= (const location& @var{that})
Whether @code{*this} and @code{that} denote equal/different ranges of
positions.
@end deftypemethod

@deftypefun {std::ostream&} operator<< (std::ostream& @var{o}, const location& @var{p})
Report @var{p} on @var{o}, taking care of special cases such as: no
@code{filename} defined, or equal filename/line or column.
@end deftypefun

@node User Defined Location Type
@subsubsection User Defined Location Type
@findex %define api.location.type

Instead of using the built-in types you may use the @code{%define} variable
@code{api.location.type} to specify your own type:

@example
%define api.location.type @var{LocationType}
@end example

The requirements over your @var{LocationType} are:
@itemize
@item
it must be copyable;

@item
in order to compute the (default) value of @code{@@$} in a reduction, the
parser basically runs
@example
@@$.begin = @@$1.begin;
@@$.end   = @@$@var{N}.end; // The location of last right-hand side symbol.
@end example
@noindent
so there must be copyable @code{begin} and @code{end} members;

@item
alternatively you may redefine the computation of the default location, in
which case these members are not required (@pxref{Location Default Action});

@item
if traces are enabled, then there must exist an @samp{std::ostream&
  operator<< (std::ostream& o, const @var{LocationType}& s)} function.
@end itemize

@sp 1

In programs with several C++ parsers, you may also use the @code{%define}
variable @code{api.location.type} to share a common set of built-in
definitions for @code{position} and @code{location}.  For instance, one
parser @file{master/parser.yy} might use:

@example
%defines
%locations
%define namespace "master::"
@end example

@noindent
to generate the @file{master/position.hh} and @file{master/location.hh}
files, reused by other parsers as follows:

@example
%define api.location.type "master::location"
%code requires @{ #include <master/location.hh> @}
@end example

@node C++ Parser Interface
@subsection C++ Parser Interface
@c - define parser_class_name
@c - Ctor
@c - parse, error, set_debug_level, debug_level, set_debug_stream,
@c   debug_stream.
@c - Reporting errors

The output files @file{@var{output}.hh} and @file{@var{output}.cc}
declare and define the parser class in the namespace @code{yy}.  The
class name defaults to @code{parser}, but may be changed using
@samp{%define parser_class_name "@var{name}"}.  The interface of
this class is detailed below.  It can be extended using the
@code{%parse-param} feature: its semantics is slightly changed since
it describes an additional member of the parser class, and an
additional argument for its constructor.

@defcv {Type} {parser} {semantic_type}
@defcvx {Type} {parser} {location_type}
The types for semantic values and locations (if enabled).
@end defcv

@defcv {Type} {parser} {token}
A structure that contains (only) the @code{yytokentype} enumeration, which
defines the tokens.  To refer to the token @code{FOO},
use @code{yy::parser::token::FOO}.  The scanner can use
@samp{typedef yy::parser::token token;} to ``import'' the token enumeration
(@pxref{Calc++ Scanner}).
@end defcv

@defcv {Type} {parser} {syntax_error}
This class derives from @code{std::runtime_error}.  Throw instances of it
from the scanner or from the user actions to raise parse errors.  This is
equivalent with first
invoking @code{error} to report the location and message of the syntax
error, and then to invoke @code{YYERROR} to enter the error-recovery mode.
But contrary to @code{YYERROR} which can only be invoked from user actions
(i.e., written in the action itself), the exception can be thrown from
function invoked from the user action.
@end defcv

@deftypemethod {parser} {} parser (@var{type1} @var{arg1}, ...)
Build a new parser object.  There are no arguments by default, unless
@samp{%parse-param @{@var{type1} @var{arg1}@}} was used.
@end deftypemethod

@deftypemethod {syntax_error} {} syntax_error (const location_type& @var{l}, const std::string& @var{m})
@deftypemethodx {syntax_error} {} syntax_error (const std::string& @var{m})
Instantiate a syntax-error exception.
@end deftypemethod

@deftypemethod {parser} {int} parse ()
Run the syntactic analysis, and return 0 on success, 1 otherwise.

@cindex exceptions
The whole function is wrapped in a @code{try}/@code{catch} block, so that
when an exception is thrown, the @code{%destructor}s are called to release
the lookahead symbol, and the symbols pushed on the stack.
@end deftypemethod

@deftypemethod {parser} {std::ostream&} debug_stream ()
@deftypemethodx {parser} {void} set_debug_stream (std::ostream& @var{o})
Get or set the stream used for tracing the parsing.  It defaults to
@code{std::cerr}.
@end deftypemethod

@deftypemethod {parser} {debug_level_type} debug_level ()
@deftypemethodx {parser} {void} set_debug_level (debug_level @var{l})
Get or set the tracing level.  Currently its value is either 0, no trace,
or nonzero, full tracing.
@end deftypemethod

@deftypemethod {parser} {void} error (const location_type& @var{l}, const std::string& @var{m})
@deftypemethodx {parser} {void} error (const std::string& @var{m})
The definition for this member function must be supplied by the user:
the parser uses it to report a parser error occurring at @var{l},
described by @var{m}.  If location tracking is not enabled, the second
signature is used.
@end deftypemethod


@node C++ Scanner Interface
@subsection C++ Scanner Interface
@c - prefix for yylex.
@c - Pure interface to yylex
@c - %lex-param

The parser invokes the scanner by calling @code{yylex}.  Contrary to C
parsers, C++ parsers are always pure: there is no point in using the
@samp{%define api.pure} directive.  The actual interface with @code{yylex}
depends whether you use unions, or variants.

@menu
* Split Symbols::         Passing symbols as two/three components
* Complete Symbols::      Making symbols a whole
@end menu

@node Split Symbols
@subsubsection Split Symbols

The interface is as follows.

@deftypemethod {parser} {int} yylex (semantic_type* @var{yylval}, location_type* @var{yylloc}, @var{type1} @var{arg1}, ...)
@deftypemethodx {parser} {int} yylex (semantic_type* @var{yylval}, @var{type1} @var{arg1}, ...)
Return the next token.  Its type is the return value, its semantic value and
location (if enabled) being @var{yylval} and @var{yylloc}.  Invocations of
@samp{%lex-param @{@var{type1} @var{arg1}@}} yield additional arguments.
@end deftypemethod

Note that when using variants, the interface for @code{yylex} is the same,
but @code{yylval} is handled differently.

Regular union-based code in Lex scanner typically look like:

@example
[0-9]+   @{
           yylval.ival = text_to_int (yytext);
           return yy::parser::INTEGER;
         @}
[a-z]+   @{
           yylval.sval = new std::string (yytext);
           return yy::parser::IDENTIFIER;
         @}
@end example

Using variants, @code{yylval} is already constructed, but it is not
initialized.  So the code would look like:

@example
[0-9]+   @{
           yylval.build<int>() = text_to_int (yytext);
           return yy::parser::INTEGER;
         @}
[a-z]+   @{
           yylval.build<std::string> = yytext;
           return yy::parser::IDENTIFIER;
         @}
@end example

@noindent
or

@example
[0-9]+   @{
           yylval.build(text_to_int (yytext));
           return yy::parser::INTEGER;
         @}
[a-z]+   @{
           yylval.build(yytext);
           return yy::parser::IDENTIFIER;
         @}
@end example


@node Complete Symbols
@subsubsection Complete Symbols

If you specified both @code{%define api.value.type variant} and
@code{%define api.token.constructor},
the @code{parser} class also defines the class @code{parser::symbol_type}
which defines a @emph{complete} symbol, aggregating its type (i.e., the
traditional value returned by @code{yylex}), its semantic value (i.e., the
value passed in @code{yylval}, and possibly its location (@code{yylloc}).

@deftypemethod {symbol_type} {} symbol_type (token_type @var{type},  const semantic_type& @var{value}, const location_type& @var{location})
Build a complete terminal symbol which token type is @var{type}, and which
semantic value is @var{value}.  If location tracking is enabled, also pass
the @var{location}.
@end deftypemethod

This interface is low-level and should not be used for two reasons.  First,
it is inconvenient, as you still have to build the semantic value, which is
a variant, and second, because consistency is not enforced: as with unions,
it is still possible to give an integer as semantic value for a string.

So for each token type, Bison generates named constructors as follows.

@deftypemethod {symbol_type} {} make_@var{token} (const @var{value_type}& @var{value}, const location_type& @var{location})
@deftypemethodx {symbol_type} {} make_@var{token} (const location_type& @var{location})
Build a complete terminal symbol for the token type @var{token} (not
including the @code{api.token.prefix}) whose possible semantic value is
@var{value} of adequate @var{value_type}.  If location tracking is enabled,
also pass the @var{location}.
@end deftypemethod

For instance, given the following declarations:

@example
%define api.token.prefix "TOK_"
%token <std::string> IDENTIFIER;
%token <int> INTEGER;
%token COLON;
@end example

@noindent
Bison generates the following functions:

@example
symbol_type make_IDENTIFIER(const std::string& v,
                            const location_type& l);
symbol_type make_INTEGER(const int& v,
                         const location_type& loc);
symbol_type make_COLON(const location_type& loc);
@end example

@noindent
which should be used in a Lex-scanner as follows.

@example
[0-9]+   return yy::parser::make_INTEGER(text_to_int (yytext), loc);
[a-z]+   return yy::parser::make_IDENTIFIER(yytext, loc);
":"      return yy::parser::make_COLON(loc);
@end example

Tokens that do not have an identifier are not accessible: you cannot simply
use characters such as @code{':'}, they must be declared with @code{%token}.

@node A Complete C++ Example
@subsection A Complete C++ Example

This section demonstrates the use of a C++ parser with a simple but
complete example.  This example should be available on your system,
ready to compile, in the directory @dfn{.../bison/examples/calc++}.  It
focuses on the use of Bison, therefore the design of the various C++
classes is very naive: no accessors, no encapsulation of members etc.
We will use a Lex scanner, and more precisely, a Flex scanner, to
demonstrate the various interactions.  A hand-written scanner is
actually easier to interface with.

@menu
* Calc++ --- C++ Calculator::   The specifications
* Calc++ Parsing Driver::       An active parsing context
* Calc++ Parser::               A parser class
* Calc++ Scanner::              A pure C++ Flex scanner
* Calc++ Top Level::            Conducting the band
@end menu

@node Calc++ --- C++ Calculator
@subsubsection Calc++ --- C++ Calculator

Of course the grammar is dedicated to arithmetics, a single
expression, possibly preceded by variable assignments.  An
environment containing possibly predefined variables such as
@code{one} and @code{two}, is exchanged with the parser.  An example
of valid input follows.

@example
three := 3
seven := one + two * three
seven * seven
@end example

@node Calc++ Parsing Driver
@subsubsection Calc++ Parsing Driver
@c - An env
@c - A place to store error messages
@c - A place for the result

To support a pure interface with the parser (and the scanner) the
technique of the ``parsing context'' is convenient: a structure
containing all the data to exchange.  Since, in addition to simply
launch the parsing, there are several auxiliary tasks to execute (open
the file for parsing, instantiate the parser etc.), we recommend
transforming the simple parsing context structure into a fully blown
@dfn{parsing driver} class.

The declaration of this driver class, @file{calc++-driver.hh}, is as
follows.  The first part includes the CPP guard and imports the
required standard library components, and the declaration of the parser
class.

@comment file: calc++-driver.hh
@example
#ifndef CALCXX_DRIVER_HH
# define CALCXX_DRIVER_HH
# include <string>
# include <map>
# include "calc++-parser.hh"
@end example


@noindent
Then comes the declaration of the scanning function.  Flex expects
the signature of @code{yylex} to be defined in the macro
@code{YY_DECL}, and the C++ parser expects it to be declared.  We can
factor both as follows.

@comment file: calc++-driver.hh
@example
// Tell Flex the lexer's prototype ...
# define YY_DECL \
  yy::calcxx_parser::symbol_type yylex (calcxx_driver& driver)
// ... and declare it for the parser's sake.
YY_DECL;
@end example

@noindent
The @code{calcxx_driver} class is then declared with its most obvious
members.

@comment file: calc++-driver.hh
@example
// Conducting the whole scanning and parsing of Calc++.
class calcxx_driver
@{
public:
  calcxx_driver ();
  virtual ~calcxx_driver ();

  std::map<std::string, int> variables;

  int result;
@end example

@noindent
To encapsulate the coordination with the Flex scanner, it is useful to have
member functions to open and close the scanning phase.

@comment file: calc++-driver.hh
@example
  // Handling the scanner.
  void scan_begin ();
  void scan_end ();
  bool trace_scanning;
@end example

@noindent
Similarly for the parser itself.

@comment file: calc++-driver.hh
@example
  // Run the parser on file F.
  // Return 0 on success.
  int parse (const std::string& f);
  // The name of the file being parsed.
  // Used later to pass the file name to the location tracker.
  std::string file;
  // Whether parser traces should be generated.
  bool trace_parsing;
@end example

@noindent
To demonstrate pure handling of parse errors, instead of simply
dumping them on the standard error output, we will pass them to the
compiler driver using the following two member functions.  Finally, we
close the class declaration and CPP guard.

@comment file: calc++-driver.hh
@example
  // Error handling.
  void error (const yy::location& l, const std::string& m);
  void error (const std::string& m);
@};
#endif // ! CALCXX_DRIVER_HH
@end example

The implementation of the driver is straightforward.  The @code{parse}
member function deserves some attention.  The @code{error} functions
are simple stubs, they should actually register the located error
messages and set error state.

@comment file: calc++-driver.cc
@example
#include "calc++-driver.hh"
#include "calc++-parser.hh"

calcxx_driver::calcxx_driver ()
  : trace_scanning (false), trace_parsing (false)
@{
  variables["one"] = 1;
  variables["two"] = 2;
@}

calcxx_driver::~calcxx_driver ()
@{
@}

int
calcxx_driver::parse (const std::string &f)
@{
  file = f;
  scan_begin ();
  yy::calcxx_parser parser (*this);
  parser.set_debug_level (trace_parsing);
  int res = parser.parse ();
  scan_end ();
  return res;
@}

void
calcxx_driver::error (const yy::location& l, const std::string& m)
@{
  std::cerr << l << ": " << m << std::endl;
@}

void
calcxx_driver::error (const std::string& m)
@{
  std::cerr << m << std::endl;
@}
@end example

@node Calc++ Parser
@subsubsection Calc++ Parser

The grammar file @file{calc++-parser.yy} starts by asking for the C++
deterministic parser skeleton, the creation of the parser header file,
and specifies the name of the parser class.  Because the C++ skeleton
changed several times, it is safer to require the version you designed
the grammar for.

@comment file: calc++-parser.yy
@example
%skeleton "lalr1.cc" /* -*- C++ -*- */
%require "@value{VERSION}"
%defines
%define parser_class_name "calcxx_parser"
@end example

@noindent
@findex %define api.token.constructor
@findex %define api.value.type variant
This example will use genuine C++ objects as semantic values, therefore, we
require the variant-based interface.  To make sure we properly use it, we
enable assertions.  To fully benefit from type-safety and more natural
definition of ``symbol'', we enable @code{api.token.constructor}.

@comment file: calc++-parser.yy
@example
%define api.token.constructor
%define api.value.type variant
%define parse.assert
@end example

@noindent
@findex %code requires
Then come the declarations/inclusions needed by the semantic values.
Because the parser uses the parsing driver and reciprocally, both would like
to include the header of the other, which is, of course, insane.  This
mutual dependency will be broken using forward declarations.  Because the
driver's header needs detailed knowledge about the parser class (in
particular its inner types), it is the parser's header which will use a
forward declaration of the driver.  @xref{%code Summary}.

@comment file: calc++-parser.yy
@example
%code requires
@{
# include <string>
class calcxx_driver;
@}
@end example

@noindent
The driver is passed by reference to the parser and to the scanner.
This provides a simple but effective pure interface, not relying on
global variables.

@comment file: calc++-parser.yy
@example
// The parsing context.
%param @{ calcxx_driver& driver @}
@end example

@noindent
Then we request location tracking, and initialize the
first location's file name.  Afterward new locations are computed
relatively to the previous locations: the file name will be
propagated.

@comment file: calc++-parser.yy
@example
%locations
%initial-action
@{
  // Initialize the initial location.
  @@$.begin.filename = @@$.end.filename = &driver.file;
@};
@end example

@noindent
Use the following two directives to enable parser tracing and verbose error
messages.  However, verbose error messages can contain incorrect information
(@pxref{LAC}).

@comment file: calc++-parser.yy
@example
%define parse.trace
%define parse.error verbose
@end example

@noindent
@findex %code
The code between @samp{%code @{} and @samp{@}} is output in the
@file{*.cc} file; it needs detailed knowledge about the driver.

@comment file: calc++-parser.yy
@example
%code
@{
# include "calc++-driver.hh"
@}
@end example


@noindent
The token numbered as 0 corresponds to end of file; the following line
allows for nicer error messages referring to ``end of file'' instead of
``$end''.  Similarly user friendly names are provided for each symbol.  To
avoid name clashes in the generated files (@pxref{Calc++ Scanner}), prefix
tokens with @code{TOK_} (@pxref{%define Summary,,api.token.prefix}).

@comment file: calc++-parser.yy
@example
%define api.token.prefix "TOK_"
%token
  END  0  "end of file"
  ASSIGN  ":="
  MINUS   "-"
  PLUS    "+"
  STAR    "*"
  SLASH   "/"
  LPAREN  "("
  RPAREN  ")"
;
@end example

@noindent
Since we use variant-based semantic values, @code{%union} is not used, and
both @code{%type} and @code{%token} expect genuine types, as opposed to type
tags.

@comment file: calc++-parser.yy
@example
%token <std::string> IDENTIFIER "identifier"
%token <int> NUMBER "number"
%type  <int> exp
@end example

@noindent
No @code{%destructor} is needed to enable memory deallocation during error
recovery; the memory, for strings for instance, will be reclaimed by the
regular destructors.  All the values are printed using their
@code{operator<<} (@pxref{Printer Decl, , Printing Semantic Values}).

@comment file: calc++-parser.yy
@example
%printer @{ yyoutput << $$; @} <*>;
@end example

@noindent
The grammar itself is straightforward (@pxref{Location Tracking Calc, ,
Location Tracking Calculator: @code{ltcalc}}).

@comment file: calc++-parser.yy
@example
%%
%start unit;
unit: assignments exp  @{ driver.result = $2; @};

assignments:
  %empty                 @{@}
| assignments assignment @{@};

assignment:
  "identifier" ":=" exp @{ driver.variables[$1] = $3; @};

%left "+" "-";
%left "*" "/";
exp:
  exp "+" exp   @{ $$ = $1 + $3; @}
| exp "-" exp   @{ $$ = $1 - $3; @}
| exp "*" exp   @{ $$ = $1 * $3; @}
| exp "/" exp   @{ $$ = $1 / $3; @}
| "(" exp ")"   @{ std::swap ($$, $2); @}
| "identifier"  @{ $$ = driver.variables[$1]; @}
| "number"      @{ std::swap ($$, $1); @};
%%
@end example

@noindent
Finally the @code{error} member function registers the errors to the
driver.

@comment file: calc++-parser.yy
@example
void
yy::calcxx_parser::error (const location_type& l,
                          const std::string& m)
@{
  driver.error (l, m);
@}
@end example

@node Calc++ Scanner
@subsubsection Calc++ Scanner

The Flex scanner first includes the driver declaration, then the
parser's to get the set of defined tokens.

@comment file: calc++-scanner.ll
@example
%@{ /* -*- C++ -*- */
# include <cerrno>
# include <climits>
# include <cstdlib>
# include <string>
# include "calc++-driver.hh"
# include "calc++-parser.hh"

// Work around an incompatibility in flex (at least versions
// 2.5.31 through 2.5.33): it generates code that does
// not conform to C89.  See Debian bug 333231
// <http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=333231>.
# undef yywrap
# define yywrap() 1

// The location of the current token.
static yy::location loc;
%@}
@end example

@noindent
Because there is no @code{#include}-like feature we don't need
@code{yywrap}, we don't need @code{unput} either, and we parse an
actual file, this is not an interactive session with the user.
Finally, we enable scanner tracing.

@comment file: calc++-scanner.ll
@example
%option noyywrap nounput batch debug noinput
@end example

@noindent
Abbreviations allow for more readable rules.

@comment file: calc++-scanner.ll
@example
id    [a-zA-Z][a-zA-Z_0-9]*
int   [0-9]+
blank [ \t]
@end example

@noindent
The following paragraph suffices to track locations accurately.  Each
time @code{yylex} is invoked, the begin position is moved onto the end
position.  Then when a pattern is matched, its width is added to the end
column.  When matching ends of lines, the end
cursor is adjusted, and each time blanks are matched, the begin cursor
is moved onto the end cursor to effectively ignore the blanks
preceding tokens.  Comments would be treated equally.

@comment file: calc++-scanner.ll
@example
@group
%@{
  // Code run each time a pattern is matched.
  # define YY_USER_ACTION  loc.columns (yyleng);
%@}
@end group
%%
@group
%@{
  // Code run each time yylex is called.
  loc.step ();
%@}
@end group
@{blank@}+   loc.step ();
[\n]+      loc.lines (yyleng); loc.step ();
@end example

@noindent
The rules are simple.  The driver is used to report errors.

@comment file: calc++-scanner.ll
@example
"-"      return yy::calcxx_parser::make_MINUS(loc);
"+"      return yy::calcxx_parser::make_PLUS(loc);
"*"      return yy::calcxx_parser::make_STAR(loc);
"/"      return yy::calcxx_parser::make_SLASH(loc);
"("      return yy::calcxx_parser::make_LPAREN(loc);
")"      return yy::calcxx_parser::make_RPAREN(loc);
":="     return yy::calcxx_parser::make_ASSIGN(loc);

@group
@{int@}      @{
  errno = 0;
  long n = strtol (yytext, NULL, 10);
  if (! (INT_MIN <= n && n <= INT_MAX && errno != ERANGE))
    driver.error (loc, "integer is out of range");
  return yy::calcxx_parser::make_NUMBER(n, loc);
@}
@end group
@{id@}       return yy::calcxx_parser::make_IDENTIFIER(yytext, loc);
.          driver.error (loc, "invalid character");
<<EOF>>    return yy::calcxx_parser::make_END(loc);
%%
@end example

@noindent
Finally, because the scanner-related driver's member-functions depend
on the scanner's data, it is simpler to implement them in this file.

@comment file: calc++-scanner.ll
@example
@group
void
calcxx_driver::scan_begin ()
@{
  yy_flex_debug = trace_scanning;
  if (file.empty () || file == "-")
    yyin = stdin;
  else if (!(yyin = fopen (file.c_str (), "r")))
    @{
      error ("cannot open " + file + ": " + strerror(errno));
      exit (EXIT_FAILURE);
    @}
@}
@end group

@group
void
calcxx_driver::scan_end ()
@{
  fclose (yyin);
@}
@end group
@end example

@node Calc++ Top Level
@subsubsection Calc++ Top Level

The top level file, @file{calc++.cc}, poses no problem.

@comment file: calc++.cc
@example
#include <iostream>
#include "calc++-driver.hh"

@group
int
main (int argc, char *argv[])
@{
  int res = 0;
  calcxx_driver driver;
  for (int i = 1; i < argc; ++i)
    if (argv[i] == std::string ("-p"))
      driver.trace_parsing = true;
    else if (argv[i] == std::string ("-s"))
      driver.trace_scanning = true;
    else if (!driver.parse (argv[i]))
      std::cout << driver.result << std::endl;
    else
      res = 1;
  return res;
@}
@end group
@end example

@node Java Parsers
@section Java Parsers

@menu
* Java Bison Interface::        Asking for Java parser generation
* Java Semantic Values::        %type and %token vs. Java
* Java Location Values::        The position and location classes
* Java Parser Interface::       Instantiating and running the parser
* Java Scanner Interface::      Specifying the scanner for the parser
* Java Action Features::        Special features for use in actions
* Java Differences::            Differences between C/C++ and Java Grammars
* Java Declarations Summary::   List of Bison declarations used with Java
@end menu

@node Java Bison Interface
@subsection Java Bison Interface
@c - %language "Java"

(The current Java interface is experimental and may evolve.
More user feedback will help to stabilize it.)

The Java parser skeletons are selected using the @code{%language "Java"}
directive or the @option{-L java}/@option{--language=java} option.

@c FIXME: Documented bug.
When generating a Java parser, @code{bison @var{basename}.y} will
create a single Java source file named @file{@var{basename}.java}
containing the parser implementation.  Using a grammar file without a
@file{.y} suffix is currently broken.  The basename of the parser
implementation file can be changed by the @code{%file-prefix}
directive or the @option{-p}/@option{--name-prefix} option.  The
entire parser implementation file name can be changed by the
@code{%output} directive or the @option{-o}/@option{--output} option.
The parser implementation file contains a single class for the parser.

You can create documentation for generated parsers using Javadoc.

Contrary to C parsers, Java parsers do not use global variables; the
state of the parser is always local to an instance of the parser class.
Therefore, all Java parsers are ``pure'', and the @code{%pure-parser}
and @code{%define api.pure} directives do nothing when used in Java.

Push parsers are currently unsupported in Java and @code{%define
api.push-pull} have no effect.

GLR parsers are currently unsupported in Java.  Do not use the
@code{glr-parser} directive.

No header file can be generated for Java parsers.  Do not use the
@code{%defines} directive or the @option{-d}/@option{--defines} options.

@c FIXME: Possible code change.
Currently, support for tracing is always compiled
in.  Thus the @samp{%define parse.trace} and @samp{%token-table}
directives and the
@option{-t}/@option{--debug} and @option{-k}/@option{--token-table}
options have no effect.  This may change in the future to eliminate
unused code in the generated parser, so use @samp{%define parse.trace}
explicitly
if needed.  Also, in the future the
@code{%token-table} directive might enable a public interface to
access the token names and codes.

Getting a ``code too large'' error from the Java compiler means the code
hit the 64KB bytecode per method limitation of the Java class file.
Try reducing the amount of code in actions and static initializers;
otherwise, report a bug so that the parser skeleton will be improved.


@node Java Semantic Values
@subsection Java Semantic Values
@c - No %union, specify type in %type/%token.
@c - YYSTYPE
@c - Printer and destructor

There is no @code{%union} directive in Java parsers.  Instead, the
semantic values' types (class names) should be specified in the
@code{%type} or @code{%token} directive:

@example
%type <Expression> expr assignment_expr term factor
%type <Integer> number
@end example

By default, the semantic stack is declared to have @code{Object} members,
which means that the class types you specify can be of any class.
To improve the type safety of the parser, you can declare the common
superclass of all the semantic values using the @samp{%define api.value.type}
directive.  For example, after the following declaration:

@example
%define api.value.type "ASTNode"
@end example

@noindent
any @code{%type} or @code{%token} specifying a semantic type which
is not a subclass of ASTNode, will cause a compile-time error.

@c FIXME: Documented bug.
Types used in the directives may be qualified with a package name.
Primitive data types are accepted for Java version 1.5 or later.  Note
that in this case the autoboxing feature of Java 1.5 will be used.
Generic types may not be used; this is due to a limitation in the
implementation of Bison, and may change in future releases.

Java parsers do not support @code{%destructor}, since the language
adopts garbage collection.  The parser will try to hold references
to semantic values for as little time as needed.

Java parsers do not support @code{%printer}, as @code{toString()}
can be used to print the semantic values.  This however may change
(in a backwards-compatible way) in future versions of Bison.


@node Java Location Values
@subsection Java Location Values
@c - %locations
@c - class Position
@c - class Location

When the directive @code{%locations} is used, the Java parser supports
location tracking, see @ref{Tracking Locations}.  An auxiliary user-defined
class defines a @dfn{position}, a single point in a file; Bison itself
defines a class representing a @dfn{location}, a range composed of a pair of
positions (possibly spanning several files).  The location class is an inner
class of the parser; the name is @code{Location} by default, and may also be
renamed using @code{%define api.location.type "@var{class-name}"}.

The location class treats the position as a completely opaque value.
By default, the class name is @code{Position}, but this can be changed
with @code{%define api.position.type "@var{class-name}"}.  This class must
be supplied by the user.


@deftypeivar {Location} {Position} begin
@deftypeivarx {Location} {Position} end
The first, inclusive, position of the range, and the first beyond.
@end deftypeivar

@deftypeop {Constructor} {Location} {} Location (Position @var{loc})
Create a @code{Location} denoting an empty range located at a given point.
@end deftypeop

@deftypeop {Constructor} {Location} {} Location (Position @var{begin}, Position @var{end})
Create a @code{Location} from the endpoints of the range.
@end deftypeop

@deftypemethod {Location} {String} toString ()
Prints the range represented by the location.  For this to work
properly, the position class should override the @code{equals} and
@code{toString} methods appropriately.
@end deftypemethod


@node Java Parser Interface
@subsection Java Parser Interface
@c - define parser_class_name
@c - Ctor
@c - parse, error, set_debug_level, debug_level, set_debug_stream,
@c   debug_stream.
@c - Reporting errors

The name of the generated parser class defaults to @code{YYParser}.  The
@code{YY} prefix may be changed using the @code{%name-prefix} directive
or the @option{-p}/@option{--name-prefix} option.  Alternatively, use
@samp{%define parser_class_name "@var{name}"} to give a custom name to
the class.  The interface of this class is detailed below.

By default, the parser class has package visibility.  A declaration
@samp{%define public} will change to public visibility.  Remember that,
according to the Java language specification, the name of the @file{.java}
file should match the name of the class in this case.  Similarly, you can
use @code{abstract}, @code{final} and @code{strictfp} with the
@code{%define} declaration to add other modifiers to the parser class.
A single @samp{%define annotations "@var{annotations}"} directive can
be used to add any number of annotations to the parser class.

The Java package name of the parser class can be specified using the
@samp{%define package} directive.  The superclass and the implemented
interfaces of the parser class can be specified with the @code{%define
extends} and @samp{%define implements} directives.

The parser class defines an inner class, @code{Location}, that is used
for location tracking (see @ref{Java Location Values}), and a inner
interface, @code{Lexer} (see @ref{Java Scanner Interface}).  Other than
these inner class/interface, and the members described in the interface
below, all the other members and fields are preceded with a @code{yy} or
@code{YY} prefix to avoid clashes with user code.

The parser class can be extended using the @code{%parse-param}
directive. Each occurrence of the directive will add a @code{protected
final} field to the parser class, and an argument to its constructor,
which initialize them automatically.

@deftypeop {Constructor} {YYParser} {} YYParser (@var{lex_param}, @dots{}, @var{parse_param}, @dots{})
Build a new parser object with embedded @code{%code lexer}.  There are
no parameters, unless @code{%param}s and/or @code{%parse-param}s and/or
@code{%lex-param}s are used.

Use @code{%code init} for code added to the start of the constructor
body. This is especially useful to initialize superclasses. Use
@samp{%define init_throws} to specify any uncaught exceptions.
@end deftypeop

@deftypeop {Constructor} {YYParser} {} YYParser (Lexer @var{lexer}, @var{parse_param}, @dots{})
Build a new parser object using the specified scanner.  There are no
additional parameters unless @code{%param}s and/or @code{%parse-param}s are
used.

If the scanner is defined by @code{%code lexer}, this constructor is
declared @code{protected} and is called automatically with a scanner
created with the correct @code{%param}s and/or @code{%lex-param}s.

Use @code{%code init} for code added to the start of the constructor
body. This is especially useful to initialize superclasses. Use
@samp{%define init_throws} to specify any uncaught exceptions.
@end deftypeop

@deftypemethod {YYParser} {boolean} parse ()
Run the syntactic analysis, and return @code{true} on success,
@code{false} otherwise.
@end deftypemethod

@deftypemethod {YYParser} {boolean} getErrorVerbose ()
@deftypemethodx {YYParser} {void} setErrorVerbose (boolean @var{verbose})
Get or set the option to produce verbose error messages.  These are only
available with @samp{%define parse.error verbose}, which also turns on
verbose error messages.
@end deftypemethod

@deftypemethod {YYParser} {void} yyerror (String @var{msg})
@deftypemethodx {YYParser} {void} yyerror (Position @var{pos}, String @var{msg})
@deftypemethodx {YYParser} {void} yyerror (Location @var{loc}, String @var{msg})
Print an error message using the @code{yyerror} method of the scanner
instance in use. The @code{Location} and @code{Position} parameters are
available only if location tracking is active.
@end deftypemethod

@deftypemethod {YYParser} {boolean} recovering ()
During the syntactic analysis, return @code{true} if recovering
from a syntax error.
@xref{Error Recovery}.
@end deftypemethod

@deftypemethod {YYParser} {java.io.PrintStream} getDebugStream ()
@deftypemethodx {YYParser} {void} setDebugStream (java.io.printStream @var{o})
Get or set the stream used for tracing the parsing.  It defaults to
@code{System.err}.
@end deftypemethod

@deftypemethod {YYParser} {int} getDebugLevel ()
@deftypemethodx {YYParser} {void} setDebugLevel (int @var{l})
Get or set the tracing level.  Currently its value is either 0, no trace,
or nonzero, full tracing.
@end deftypemethod

@deftypecv {Constant} {YYParser} {String} {bisonVersion}
@deftypecvx {Constant} {YYParser} {String} {bisonSkeleton}
Identify the Bison version and skeleton used to generate this parser.
@end deftypecv


@node Java Scanner Interface
@subsection Java Scanner Interface
@c - %code lexer
@c - %lex-param
@c - Lexer interface

There are two possible ways to interface a Bison-generated Java parser
with a scanner: the scanner may be defined by @code{%code lexer}, or
defined elsewhere.  In either case, the scanner has to implement the
@code{Lexer} inner interface of the parser class.  This interface also
contain constants for all user-defined token names and the predefined
@code{EOF} token.

In the first case, the body of the scanner class is placed in
@code{%code lexer} blocks.  If you want to pass parameters from the
parser constructor to the scanner constructor, specify them with
@code{%lex-param}; they are passed before @code{%parse-param}s to the
constructor.

In the second case, the scanner has to implement the @code{Lexer} interface,
which is defined within the parser class (e.g., @code{YYParser.Lexer}).
The constructor of the parser object will then accept an object
implementing the interface; @code{%lex-param} is not used in this
case.

In both cases, the scanner has to implement the following methods.

@deftypemethod {Lexer} {void} yyerror (Location @var{loc}, String @var{msg})
This method is defined by the user to emit an error message.  The first
parameter is omitted if location tracking is not active.  Its type can be
changed using @code{%define api.location.type "@var{class-name}".}
@end deftypemethod

@deftypemethod {Lexer} {int} yylex ()
Return the next token.  Its type is the return value, its semantic
value and location are saved and returned by the their methods in the
interface.

Use @samp{%define lex_throws} to specify any uncaught exceptions.
Default is @code{java.io.IOException}.
@end deftypemethod

@deftypemethod {Lexer} {Position} getStartPos ()
@deftypemethodx {Lexer} {Position} getEndPos ()
Return respectively the first position of the last token that
@code{yylex} returned, and the first position beyond it.  These
methods are not needed unless location tracking is active.

The return type can be changed using @code{%define api.position.type
"@var{class-name}".}
@end deftypemethod

@deftypemethod {Lexer} {Object} getLVal ()
Return the semantic value of the last token that yylex returned.

The return type can be changed using @samp{%define api.value.type
"@var{class-name}".}
@end deftypemethod


@node Java Action Features
@subsection Special Features for Use in Java Actions

The following special constructs can be uses in Java actions.
Other analogous C action features are currently unavailable for Java.

Use @samp{%define throws} to specify any uncaught exceptions from parser
actions, and initial actions specified by @code{%initial-action}.

@defvar $@var{n}
The semantic value for the @var{n}th component of the current rule.
This may not be assigned to.
@xref{Java Semantic Values}.
@end defvar

@defvar $<@var{typealt}>@var{n}
Like @code{$@var{n}} but specifies a alternative type @var{typealt}.
@xref{Java Semantic Values}.
@end defvar

@defvar $$
The semantic value for the grouping made by the current rule.  As a
value, this is in the base type (@code{Object} or as specified by
@samp{%define api.value.type}) as in not cast to the declared subtype because
casts are not allowed on the left-hand side of Java assignments.
Use an explicit Java cast if the correct subtype is needed.
@xref{Java Semantic Values}.
@end defvar

@defvar $<@var{typealt}>$
Same as @code{$$} since Java always allow assigning to the base type.
Perhaps we should use this and @code{$<>$} for the value and @code{$$}
for setting the value but there is currently no easy way to distinguish
these constructs.
@xref{Java Semantic Values}.
@end defvar

@defvar @@@var{n}
The location information of the @var{n}th component of the current rule.
This may not be assigned to.
@xref{Java Location Values}.
@end defvar

@defvar @@$
The location information of the grouping made by the current rule.
@xref{Java Location Values}.
@end defvar

@deftypefn {Statement} return YYABORT @code{;}
Return immediately from the parser, indicating failure.
@xref{Java Parser Interface}.
@end deftypefn

@deftypefn {Statement} return YYACCEPT @code{;}
Return immediately from the parser, indicating success.
@xref{Java Parser Interface}.
@end deftypefn

@deftypefn {Statement} {return} YYERROR @code{;}
Start error recovery (without printing an error message).
@xref{Error Recovery}.
@end deftypefn

@deftypefn {Function} {boolean} recovering ()
Return whether error recovery is being done. In this state, the parser
reads token until it reaches a known state, and then restarts normal
operation.
@xref{Error Recovery}.
@end deftypefn

@deftypefn  {Function} {void} yyerror (String @var{msg})
@deftypefnx {Function} {void} yyerror (Position @var{loc}, String @var{msg})
@deftypefnx {Function} {void} yyerror (Location @var{loc}, String @var{msg})
Print an error message using the @code{yyerror} method of the scanner
instance in use. The @code{Location} and @code{Position} parameters are
available only if location tracking is active.
@end deftypefn


@node Java Differences
@subsection Differences between C/C++ and Java Grammars

The different structure of the Java language forces several differences
between C/C++ grammars, and grammars designed for Java parsers.  This
section summarizes these differences.

@itemize
@item
Java lacks a preprocessor, so the @code{YYERROR}, @code{YYACCEPT},
@code{YYABORT} symbols (@pxref{Table of Symbols}) cannot obviously be
macros.  Instead, they should be preceded by @code{return} when they
appear in an action.  The actual definition of these symbols is
opaque to the Bison grammar, and it might change in the future.  The
only meaningful operation that you can do, is to return them.
@xref{Java Action Features}.

Note that of these three symbols, only @code{YYACCEPT} and
@code{YYABORT} will cause a return from the @code{yyparse}
method@footnote{Java parsers include the actions in a separate
method than @code{yyparse} in order to have an intuitive syntax that
corresponds to these C macros.}.

@item
Java lacks unions, so @code{%union} has no effect.  Instead, semantic
values have a common base type: @code{Object} or as specified by
@samp{%define api.value.type}.  Angle brackets on @code{%token}, @code{type},
@code{$@var{n}} and @code{$$} specify subtypes rather than fields of
an union.  The type of @code{$$}, even with angle brackets, is the base
type since Java casts are not allow on the left-hand side of assignments.
Also, @code{$@var{n}} and @code{@@@var{n}} are not allowed on the
left-hand side of assignments. @xref{Java Semantic Values}, and
@ref{Java Action Features}.

@item
The prologue declarations have a different meaning than in C/C++ code.
@table @asis
@item @code{%code imports}
blocks are placed at the beginning of the Java source code.  They may
include copyright notices.  For a @code{package} declarations, it is
suggested to use @samp{%define package} instead.

@item unqualified @code{%code}
blocks are placed inside the parser class.

@item @code{%code lexer}
blocks, if specified, should include the implementation of the
scanner.  If there is no such block, the scanner can be any class
that implements the appropriate interface (@pxref{Java Scanner
Interface}).
@end table

Other @code{%code} blocks are not supported in Java parsers.
In particular, @code{%@{ @dots{} %@}} blocks should not be used
and may give an error in future versions of Bison.

The epilogue has the same meaning as in C/C++ code and it can
be used to define other classes used by the parser @emph{outside}
the parser class.
@end itemize


@node Java Declarations Summary
@subsection Java Declarations Summary

This summary only include declarations specific to Java or have special
meaning when used in a Java parser.

@deffn {Directive} {%language "Java"}
Generate a Java class for the parser.
@end deffn

@deffn {Directive} %lex-param @{@var{type} @var{name}@}
A parameter for the lexer class defined by @code{%code lexer}
@emph{only}, added as parameters to the lexer constructor and the parser
constructor that @emph{creates} a lexer.  Default is none.
@xref{Java Scanner Interface}.
@end deffn

@deffn {Directive} %name-prefix "@var{prefix}"
The prefix of the parser class name @code{@var{prefix}Parser} if
@samp{%define parser_class_name} is not used.  Default is @code{YY}.
@xref{Java Bison Interface}.
@end deffn

@deffn {Directive} %parse-param @{@var{type} @var{name}@}
A parameter for the parser class added as parameters to constructor(s)
and as fields initialized by the constructor(s).  Default is none.
@xref{Java Parser Interface}.
@end deffn

@deffn {Directive} %token <@var{type}> @var{token} @dots{}
Declare tokens.  Note that the angle brackets enclose a Java @emph{type}.
@xref{Java Semantic Values}.
@end deffn

@deffn {Directive} %type <@var{type}> @var{nonterminal} @dots{}
Declare the type of nonterminals.  Note that the angle brackets enclose
a Java @emph{type}.
@xref{Java Semantic Values}.
@end deffn

@deffn {Directive} %code @{ @var{code} @dots{} @}
Code appended to the inside of the parser class.
@xref{Java Differences}.
@end deffn

@deffn {Directive} {%code imports} @{ @var{code} @dots{} @}
Code inserted just after the @code{package} declaration.
@xref{Java Differences}.
@end deffn

@deffn {Directive} {%code init} @{ @var{code} @dots{} @}
Code inserted at the beginning of the parser constructor body.
@xref{Java Parser Interface}.
@end deffn

@deffn {Directive} {%code lexer} @{ @var{code} @dots{} @}
Code added to the body of a inner lexer class within the parser class.
@xref{Java Scanner Interface}.
@end deffn

@deffn {Directive} %% @var{code} @dots{}
Code (after the second @code{%%}) appended to the end of the file,
@emph{outside} the parser class.
@xref{Java Differences}.
@end deffn

@deffn {Directive} %@{ @var{code} @dots{} %@}
Not supported.  Use @code{%code imports} instead.
@xref{Java Differences}.
@end deffn

@deffn {Directive} {%define abstract}
Whether the parser class is declared @code{abstract}.  Default is false.
@xref{Java Bison Interface}.
@end deffn

@deffn {Directive} {%define annotations} "@var{annotations}"
The Java annotations for the parser class.  Default is none.
@xref{Java Bison Interface}.
@end deffn

@deffn {Directive} {%define extends} "@var{superclass}"
The superclass of the parser class.  Default is none.
@xref{Java Bison Interface}.
@end deffn

@deffn {Directive} {%define final}
Whether the parser class is declared @code{final}.  Default is false.
@xref{Java Bison Interface}.
@end deffn

@deffn {Directive} {%define implements} "@var{interfaces}"
The implemented interfaces of the parser class, a comma-separated list.
Default is none.
@xref{Java Bison Interface}.
@end deffn

@deffn {Directive} {%define init_throws} "@var{exceptions}"
The exceptions thrown by @code{%code init} from the parser class
constructor.  Default is none.
@xref{Java Parser Interface}.
@end deffn

@deffn {Directive} {%define lex_throws} "@var{exceptions}"
The exceptions thrown by the @code{yylex} method of the lexer, a
comma-separated list.  Default is @code{java.io.IOException}.
@xref{Java Scanner Interface}.
@end deffn

@deffn {Directive} {%define api.location.type} "@var{class}"
The name of the class used for locations (a range between two
positions).  This class is generated as an inner class of the parser
class by @command{bison}.  Default is @code{Location}.
Formerly named @code{location_type}.
@xref{Java Location Values}.
@end deffn

@deffn {Directive} {%define package} "@var{package}"
The package to put the parser class in.  Default is none.
@xref{Java Bison Interface}.
@end deffn

@deffn {Directive} {%define parser_class_name} "@var{name}"
The name of the parser class.  Default is @code{YYParser} or
@code{@var{name-prefix}Parser}.
@xref{Java Bison Interface}.
@end deffn

@deffn {Directive} {%define api.position.type} "@var{class}"
The name of the class used for positions. This class must be supplied by
the user.  Default is @code{Position}.
Formerly named @code{position_type}.
@xref{Java Location Values}.
@end deffn

@deffn {Directive} {%define public}
Whether the parser class is declared @code{public}.  Default is false.
@xref{Java Bison Interface}.
@end deffn

@deffn {Directive} {%define api.value.type} "@var{class}"
The base type of semantic values.  Default is @code{Object}.
@xref{Java Semantic Values}.
@end deffn

@deffn {Directive} {%define strictfp}
Whether the parser class is declared @code{strictfp}.  Default is false.
@xref{Java Bison Interface}.
@end deffn

@deffn {Directive} {%define throws} "@var{exceptions}"
The exceptions thrown by user-supplied parser actions and
@code{%initial-action}, a comma-separated list.  Default is none.
@xref{Java Parser Interface}.
@end deffn


@c ================================================= FAQ

@node FAQ
@chapter Frequently Asked Questions
@cindex frequently asked questions
@cindex questions

Several questions about Bison come up occasionally.  Here some of them
are addressed.

@menu
* Memory Exhausted::            Breaking the Stack Limits
* How Can I Reset the Parser::  @code{yyparse} Keeps some State
* Strings are Destroyed::       @code{yylval} Loses Track of Strings
* Implementing Gotos/Loops::    Control Flow in the Calculator
* Multiple start-symbols::      Factoring closely related grammars
* Secure?  Conform?::           Is Bison POSIX safe?
* I can't build Bison::         Troubleshooting
* Where can I find help?::      Troubleshouting
* Bug Reports::                 Troublereporting
* More Languages::              Parsers in C++, Java, and so on
* Beta Testing::                Experimenting development versions
* Mailing Lists::               Meeting other Bison users
@end menu

@node Memory Exhausted
@section Memory Exhausted

@quotation
My parser returns with error with a @samp{memory exhausted}
message.  What can I do?
@end quotation

This question is already addressed elsewhere, see @ref{Recursion, ,Recursive
Rules}.

@node How Can I Reset the Parser
@section How Can I Reset the Parser

The following phenomenon has several symptoms, resulting in the
following typical questions:

@quotation
I invoke @code{yyparse} several times, and on correct input it works
properly; but when a parse error is found, all the other calls fail
too.  How can I reset the error flag of @code{yyparse}?
@end quotation

@noindent
or

@quotation
My parser includes support for an @samp{#include}-like feature, in
which case I run @code{yyparse} from @code{yyparse}.  This fails
although I did specify @samp{%define api.pure full}.
@end quotation

These problems typically come not from Bison itself, but from
Lex-generated scanners.  Because these scanners use large buffers for
speed, they might not notice a change of input file.  As a
demonstration, consider the following source file,
@file{first-line.l}:

@example
@group
%@{
#include <stdio.h>
#include <stdlib.h>
%@}
@end group
%%
.*\n    ECHO; return 1;
%%
@group
int
yyparse (char const *file)
@{
  yyin = fopen (file, "r");
  if (!yyin)
    @{
      perror ("fopen");
      exit (EXIT_FAILURE);
    @}
@end group
@group
  /* One token only.  */
  yylex ();
  if (fclose (yyin) != 0)
    @{
      perror ("fclose");
      exit (EXIT_FAILURE);
    @}
  return 0;
@}
@end group

@group
int
main (void)
@{
  yyparse ("input");
  yyparse ("input");
  return 0;
@}
@end group
@end example

@noindent
If the file @file{input} contains

@example
input:1: Hello,
input:2: World!
@end example

@noindent
then instead of getting the first line twice, you get:

@example
$ @kbd{flex -ofirst-line.c first-line.l}
$ @kbd{gcc  -ofirst-line   first-line.c -ll}
$ @kbd{./first-line}
input:1: Hello,
input:2: World!
@end example

Therefore, whenever you change @code{yyin}, you must tell the
Lex-generated scanner to discard its current buffer and switch to the
new one.  This depends upon your implementation of Lex; see its
documentation for more.  For Flex, it suffices to call
@samp{YY_FLUSH_BUFFER} after each change to @code{yyin}.  If your
Flex-generated scanner needs to read from several input streams to
handle features like include files, you might consider using Flex
functions like @samp{yy_switch_to_buffer} that manipulate multiple
input buffers.

If your Flex-generated scanner uses start conditions (@pxref{Start
conditions, , Start conditions, flex, The Flex Manual}), you might
also want to reset the scanner's state, i.e., go back to the initial
start condition, through a call to @samp{BEGIN (0)}.

@node Strings are Destroyed
@section Strings are Destroyed

@quotation
My parser seems to destroy old strings, or maybe it loses track of
them.  Instead of reporting @samp{"foo", "bar"}, it reports
@samp{"bar", "bar"}, or even @samp{"foo\nbar", "bar"}.
@end quotation

This error is probably the single most frequent ``bug report'' sent to
Bison lists, but is only concerned with a misunderstanding of the role
of the scanner.  Consider the following Lex code:

@example
@group
%@{
#include <stdio.h>
char *yylval = NULL;
%@}
@end group
@group
%%
.*    yylval = yytext; return 1;
\n    /* IGNORE */
%%
@end group
@group
int
main ()
@{
  /* Similar to using $1, $2 in a Bison action.  */
  char *fst = (yylex (), yylval);
  char *snd = (yylex (), yylval);
  printf ("\"%s\", \"%s\"\n", fst, snd);
  return 0;
@}
@end group
@end example

If you compile and run this code, you get:

@example
$ @kbd{flex -osplit-lines.c split-lines.l}
$ @kbd{gcc  -osplit-lines   split-lines.c -ll}
$ @kbd{printf 'one\ntwo\n' | ./split-lines}
"one
two", "two"
@end example

@noindent
this is because @code{yytext} is a buffer provided for @emph{reading}
in the action, but if you want to keep it, you have to duplicate it
(e.g., using @code{strdup}).  Note that the output may depend on how
your implementation of Lex handles @code{yytext}.  For instance, when
given the Lex compatibility option @option{-l} (which triggers the
option @samp{%array}) Flex generates a different behavior:

@example
$ @kbd{flex -l -osplit-lines.c split-lines.l}
$ @kbd{gcc     -osplit-lines   split-lines.c -ll}
$ @kbd{printf 'one\ntwo\n' | ./split-lines}
"two", "two"
@end example


@node Implementing Gotos/Loops
@section Implementing Gotos/Loops

@quotation
My simple calculator supports variables, assignments, and functions,
but how can I implement gotos, or loops?
@end quotation

Although very pedagogical, the examples included in the document blur
the distinction to make between the parser---whose job is to recover
the structure of a text and to transmit it to subsequent modules of
the program---and the processing (such as the execution) of this
structure.  This works well with so called straight line programs,
i.e., precisely those that have a straightforward execution model:
execute simple instructions one after the others.

@cindex abstract syntax tree
@cindex AST
If you want a richer model, you will probably need to use the parser
to construct a tree that does represent the structure it has
recovered; this tree is usually called the @dfn{abstract syntax tree},
or @dfn{AST} for short.  Then, walking through this tree,
traversing it in various ways, will enable treatments such as its
execution or its translation, which will result in an interpreter or a
compiler.

This topic is way beyond the scope of this manual, and the reader is
invited to consult the dedicated literature.


@node Multiple start-symbols
@section Multiple start-symbols

@quotation
I have several closely related grammars, and I would like to share their
implementations.  In fact, I could use a single grammar but with
multiple entry points.
@end quotation

Bison does not support multiple start-symbols, but there is a very
simple means to simulate them.  If @code{foo} and @code{bar} are the two
pseudo start-symbols, then introduce two new tokens, say
@code{START_FOO} and @code{START_BAR}, and use them as switches from the
real start-symbol:

@example
%token START_FOO START_BAR;
%start start;
start:
  START_FOO foo
| START_BAR bar;
@end example

These tokens prevents the introduction of new conflicts.  As far as the
parser goes, that is all that is needed.

Now the difficult part is ensuring that the scanner will send these
tokens first.  If your scanner is hand-written, that should be
straightforward.  If your scanner is generated by Lex, them there is
simple means to do it: recall that anything between @samp{%@{ ... %@}}
after the first @code{%%} is copied verbatim in the top of the generated
@code{yylex} function.  Make sure a variable @code{start_token} is
available in the scanner (e.g., a global variable or using
@code{%lex-param} etc.), and use the following:

@example
  /* @r{Prologue.}  */
%%
%@{
  if (start_token)
    @{
      int t = start_token;
      start_token = 0;
      return t;
    @}
%@}
  /* @r{The rules.}  */
@end example


@node Secure?  Conform?
@section Secure?  Conform?

@quotation
Is Bison secure?  Does it conform to POSIX?
@end quotation

If you're looking for a guarantee or certification, we don't provide it.
However, Bison is intended to be a reliable program that conforms to the
POSIX specification for Yacc.  If you run into problems,
please send us a bug report.

@node I can't build Bison
@section I can't build Bison

@quotation
I can't build Bison because @command{make} complains that
@code{msgfmt} is not found.
What should I do?
@end quotation

Like most GNU packages with internationalization support, that feature
is turned on by default.  If you have problems building in the @file{po}
subdirectory, it indicates that your system's internationalization
support is lacking.  You can re-configure Bison with
@option{--disable-nls} to turn off this support, or you can install GNU
gettext from @url{ftp://ftp.gnu.org/gnu/gettext/} and re-configure
Bison.  See the file @file{ABOUT-NLS} for more information.


@node Where can I find help?
@section Where can I find help?

@quotation
I'm having trouble using Bison.  Where can I find help?
@end quotation

First, read this fine manual.  Beyond that, you can send mail to
@email{help-bison@@gnu.org}.  This mailing list is intended to be
populated with people who are willing to answer questions about using
and installing Bison.  Please keep in mind that (most of) the people on
the list have aspects of their lives which are not related to Bison (!),
so you may not receive an answer to your question right away.  This can
be frustrating, but please try not to honk them off; remember that any
help they provide is purely voluntary and out of the kindness of their
hearts.

@node Bug Reports
@section Bug Reports

@quotation
I found a bug.  What should I include in the bug report?
@end quotation

Before you send a bug report, make sure you are using the latest
version.  Check @url{ftp://ftp.gnu.org/pub/gnu/bison/} or one of its
mirrors.  Be sure to include the version number in your bug report.  If
the bug is present in the latest version but not in a previous version,
try to determine the most recent version which did not contain the bug.

If the bug is parser-related, you should include the smallest grammar
you can which demonstrates the bug.  The grammar file should also be
complete (i.e., I should be able to run it through Bison without having
to edit or add anything).  The smaller and simpler the grammar, the
easier it will be to fix the bug.

Include information about your compilation environment, including your
operating system's name and version and your compiler's name and
version.  If you have trouble compiling, you should also include a
transcript of the build session, starting with the invocation of
`configure'.  Depending on the nature of the bug, you may be asked to
send additional files as well (such as @file{config.h} or @file{config.cache}).

Patches are most welcome, but not required.  That is, do not hesitate to
send a bug report just because you cannot provide a fix.

Send bug reports to @email{bug-bison@@gnu.org}.

@node More Languages
@section More Languages

@quotation
Will Bison ever have C++ and Java support?  How about @var{insert your
favorite language here}?
@end quotation

C++ and Java support is there now, and is documented.  We'd love to add other
languages; contributions are welcome.

@node Beta Testing
@section Beta Testing

@quotation
What is involved in being a beta tester?
@end quotation

It's not terribly involved.  Basically, you would download a test
release, compile it, and use it to build and run a parser or two.  After
that, you would submit either a bug report or a message saying that
everything is okay.  It is important to report successes as well as
failures because test releases eventually become mainstream releases,
but only if they are adequately tested.  If no one tests, development is
essentially halted.

Beta testers are particularly needed for operating systems to which the
developers do not have easy access.  They currently have easy access to
recent GNU/Linux and Solaris versions.  Reports about other operating
systems are especially welcome.

@node Mailing Lists
@section Mailing Lists

@quotation
How do I join the help-bison and bug-bison mailing lists?
@end quotation

See @url{http://lists.gnu.org/}.

@c ================================================= Table of Symbols

@node Table of Symbols
@appendix Bison Symbols
@cindex Bison symbols, table of
@cindex symbols in Bison, table of

@deffn {Variable} @@$
In an action, the location of the left-hand side of the rule.
@xref{Tracking Locations}.
@end deffn

@deffn {Variable} @@@var{n}
@deffnx {Symbol} @@@var{n}
In an action, the location of the @var{n}-th symbol of the right-hand side
of the rule.  @xref{Tracking Locations}.

In a grammar, the Bison-generated nonterminal symbol for a mid-rule action
with a semantical value.  @xref{Mid-Rule Action Translation}.
@end deffn

@deffn {Variable} @@@var{name}
@deffnx {Variable} @@[@var{name}]
In an action, the location of a symbol addressed by @var{name}.
@xref{Tracking Locations}.
@end deffn

@deffn {Symbol} $@@@var{n}
In a grammar, the Bison-generated nonterminal symbol for a mid-rule action
with no semantical value.  @xref{Mid-Rule Action Translation}.
@end deffn

@deffn {Variable} $$
In an action, the semantic value of the left-hand side of the rule.
@xref{Actions}.
@end deffn

@deffn {Variable} $@var{n}
In an action, the semantic value of the @var{n}-th symbol of the
right-hand side of the rule.  @xref{Actions}.
@end deffn

@deffn {Variable} $@var{name}
@deffnx {Variable} $[@var{name}]
In an action, the semantic value of a symbol addressed by @var{name}.
@xref{Actions}.
@end deffn

@deffn {Delimiter} %%
Delimiter used to separate the grammar rule section from the
Bison declarations section or the epilogue.
@xref{Grammar Layout, ,The Overall Layout of a Bison Grammar}.
@end deffn

@c Don't insert spaces, or check the DVI output.
@deffn {Delimiter} %@{@var{code}%@}
All code listed between @samp{%@{} and @samp{%@}} is copied verbatim
to the parser implementation file.  Such code forms the prologue of
the grammar file.  @xref{Grammar Outline, ,Outline of a Bison
Grammar}.
@end deffn

@deffn {Directive} %?@{@var{expression}@}
Predicate actions.  This is a type of action clause that may appear in
rules. The expression is evaluated, and if false, causes a syntax error.  In
GLR parsers during nondeterministic operation,
this silently causes an alternative parse to die.  During deterministic
operation, it is the same as the effect of YYERROR.
@xref{Semantic Predicates}.

This feature is experimental.
More user feedback will help to determine whether it should become a permanent
feature.
@end deffn

@deffn {Construct} /* @dots{} */
@deffnx {Construct} // @dots{}
Comments, as in C/C++.
@end deffn

@deffn {Delimiter} :
Separates a rule's result from its components.  @xref{Rules, ,Syntax of
Grammar Rules}.
@end deffn

@deffn {Delimiter} ;
Terminates a rule.  @xref{Rules, ,Syntax of Grammar Rules}.
@end deffn

@deffn {Delimiter} |
Separates alternate rules for the same result nonterminal.
@xref{Rules, ,Syntax of Grammar Rules}.
@end deffn

@deffn {Directive} <*>
Used to define a default tagged @code{%destructor} or default tagged
@code{%printer}.

This feature is experimental.
More user feedback will help to determine whether it should become a permanent
feature.

@xref{Destructor Decl, , Freeing Discarded Symbols}.
@end deffn

@deffn {Directive} <>
Used to define a default tagless @code{%destructor} or default tagless
@code{%printer}.

This feature is experimental.
More user feedback will help to determine whether it should become a permanent
feature.

@xref{Destructor Decl, , Freeing Discarded Symbols}.
@end deffn

@deffn {Symbol} $accept
The predefined nonterminal whose only rule is @samp{$accept: @var{start}
$end}, where @var{start} is the start symbol.  @xref{Start Decl, , The
Start-Symbol}.  It cannot be used in the grammar.
@end deffn

@deffn {Directive} %code @{@var{code}@}
@deffnx {Directive} %code @var{qualifier} @{@var{code}@}
Insert @var{code} verbatim into the output parser source at the
default location or at the location specified by @var{qualifier}.
@xref{%code Summary}.
@end deffn

@deffn {Directive} %debug
Equip the parser for debugging.  @xref{Decl Summary}.
@end deffn

@ifset defaultprec
@deffn {Directive} %default-prec
Assign a precedence to rules that lack an explicit @samp{%prec}
modifier.  @xref{Contextual Precedence, ,Context-Dependent
Precedence}.
@end deffn
@end ifset

@deffn {Directive} %define @var{variable}
@deffnx {Directive} %define @var{variable} @var{value}
@deffnx {Directive} %define @var{variable} "@var{value}"
Define a variable to adjust Bison's behavior.  @xref{%define Summary}.
@end deffn

@deffn {Directive} %defines
Bison declaration to create a parser header file, which is usually
meant for the scanner.  @xref{Decl Summary}.
@end deffn

@deffn {Directive} %defines @var{defines-file}
Same as above, but save in the file @var{defines-file}.
@xref{Decl Summary}.
@end deffn

@deffn {Directive} %destructor
Specify how the parser should reclaim the memory associated to
discarded symbols.  @xref{Destructor Decl, , Freeing Discarded Symbols}.
@end deffn

@deffn {Directive} %dprec
Bison declaration to assign a precedence to a rule that is used at parse
time to resolve reduce/reduce conflicts.  @xref{GLR Parsers, ,Writing
GLR Parsers}.
@end deffn

@deffn {Directive} %empty
Bison declaration to declare make explicit that a rule has an empty
right-hand side.  @xref{Empty Rules}.
@end deffn

@deffn {Symbol} $end
The predefined token marking the end of the token stream.  It cannot be
used in the grammar.
@end deffn

@deffn {Symbol} error
A token name reserved for error recovery.  This token may be used in
grammar rules so as to allow the Bison parser to recognize an error in
the grammar without halting the process.  In effect, a sentence
containing an error may be recognized as valid.  On a syntax error, the
token @code{error} becomes the current lookahead token.  Actions
corresponding to @code{error} are then executed, and the lookahead
token is reset to the token that originally caused the violation.
@xref{Error Recovery}.
@end deffn

@deffn {Directive} %error-verbose
An obsolete directive standing for @samp{%define parse.error verbose}
(@pxref{Error Reporting, ,The Error Reporting Function @code{yyerror}}).
@end deffn

@deffn {Directive} %file-prefix "@var{prefix}"
Bison declaration to set the prefix of the output files.  @xref{Decl
Summary}.
@end deffn

@deffn {Directive} %glr-parser
Bison declaration to produce a GLR parser.  @xref{GLR
Parsers, ,Writing GLR Parsers}.
@end deffn

@deffn {Directive} %initial-action
Run user code before parsing.  @xref{Initial Action Decl, , Performing Actions before Parsing}.
@end deffn

@deffn {Directive} %language
Specify the programming language for the generated parser.
@xref{Decl Summary}.
@end deffn

@deffn {Directive} %left
Bison declaration to assign precedence and left associativity to token(s).
@xref{Precedence Decl, ,Operator Precedence}.
@end deffn

@deffn {Directive} %lex-param @{@var{argument-declaration}@} @dots{}
Bison declaration to specifying additional arguments that
@code{yylex} should accept.  @xref{Pure Calling,, Calling Conventions
for Pure Parsers}.
@end deffn

@deffn {Directive} %merge
Bison declaration to assign a merging function to a rule.  If there is a
reduce/reduce conflict with a rule having the same merging function, the
function is applied to the two semantic values to get a single result.
@xref{GLR Parsers, ,Writing GLR Parsers}.
@end deffn

@deffn {Directive} %name-prefix "@var{prefix}"
Obsoleted by the @code{%define} variable @code{api.prefix} (@pxref{Multiple
Parsers, ,Multiple Parsers in the Same Program}).

Rename the external symbols (variables and functions) used in the parser so
that they start with @var{prefix} instead of @samp{yy}.  Contrary to
@code{api.prefix}, do no rename types and macros.

The precise list of symbols renamed in C parsers is @code{yyparse},
@code{yylex}, @code{yyerror}, @code{yynerrs}, @code{yylval}, @code{yychar},
@code{yydebug}, and (if locations are used) @code{yylloc}.  If you use a
push parser, @code{yypush_parse}, @code{yypull_parse}, @code{yypstate},
@code{yypstate_new} and @code{yypstate_delete} will also be renamed.  For
example, if you use @samp{%name-prefix "c_"}, the names become
@code{c_parse}, @code{c_lex}, and so on.  For C++ parsers, see the
@code{%define namespace} documentation in this section.
@end deffn


@ifset defaultprec
@deffn {Directive} %no-default-prec
Do not assign a precedence to rules that lack an explicit @samp{%prec}
modifier.  @xref{Contextual Precedence, ,Context-Dependent
Precedence}.
@end deffn
@end ifset

@deffn {Directive} %no-lines
Bison declaration to avoid generating @code{#line} directives in the
parser implementation file.  @xref{Decl Summary}.
@end deffn

@deffn {Directive} %nonassoc
Bison declaration to assign precedence and nonassociativity to token(s).
@xref{Precedence Decl, ,Operator Precedence}.
@end deffn

@deffn {Directive} %output "@var{file}"
Bison declaration to set the name of the parser implementation file.
@xref{Decl Summary}.
@end deffn

@deffn {Directive} %param @{@var{argument-declaration}@} @dots{}
Bison declaration to specify additional arguments that both
@code{yylex} and @code{yyparse} should accept.  @xref{Parser Function,, The
Parser Function @code{yyparse}}.
@end deffn

@deffn {Directive} %parse-param @{@var{argument-declaration}@} @dots{}
Bison declaration to specify additional arguments that @code{yyparse}
should accept.  @xref{Parser Function,, The Parser Function @code{yyparse}}.
@end deffn

@deffn {Directive} %prec
Bison declaration to assign a precedence to a specific rule.
@xref{Contextual Precedence, ,Context-Dependent Precedence}.
@end deffn

@deffn {Directive} %precedence
Bison declaration to assign precedence to token(s), but no associativity
@xref{Precedence Decl, ,Operator Precedence}.
@end deffn

@deffn {Directive} %pure-parser
Deprecated version of @samp{%define api.pure} (@pxref{%define
Summary,,api.pure}), for which Bison is more careful to warn about
unreasonable usage.
@end deffn

@deffn {Directive} %require "@var{version}"
Require version @var{version} or higher of Bison.  @xref{Require Decl, ,
Require a Version of Bison}.
@end deffn

@deffn {Directive} %right
Bison declaration to assign precedence and right associativity to token(s).
@xref{Precedence Decl, ,Operator Precedence}.
@end deffn

@deffn {Directive} %skeleton
Specify the skeleton to use; usually for development.
@xref{Decl Summary}.
@end deffn

@deffn {Directive} %start
Bison declaration to specify the start symbol.  @xref{Start Decl, ,The
Start-Symbol}.
@end deffn

@deffn {Directive} %token
Bison declaration to declare token(s) without specifying precedence.
@xref{Token Decl, ,Token Type Names}.
@end deffn

@deffn {Directive} %token-table
Bison declaration to include a token name table in the parser
implementation file.  @xref{Decl Summary}.
@end deffn

@deffn {Directive} %type
Bison declaration to declare nonterminals.  @xref{Type Decl,
,Nonterminal Symbols}.
@end deffn

@deffn {Symbol} $undefined
The predefined token onto which all undefined values returned by
@code{yylex} are mapped.  It cannot be used in the grammar, rather, use
@code{error}.
@end deffn

@deffn {Directive} %union
Bison declaration to specify several possible data types for semantic
values.  @xref{Union Decl, ,The Union Declaration}.
@end deffn

@deffn {Macro} YYABORT
Macro to pretend that an unrecoverable syntax error has occurred, by
making @code{yyparse} return 1 immediately.  The error reporting
function @code{yyerror} is not called.  @xref{Parser Function, ,The
Parser Function @code{yyparse}}.

For Java parsers, this functionality is invoked using @code{return YYABORT;}
instead.
@end deffn

@deffn {Macro} YYACCEPT
Macro to pretend that a complete utterance of the language has been
read, by making @code{yyparse} return 0 immediately.
@xref{Parser Function, ,The Parser Function @code{yyparse}}.

For Java parsers, this functionality is invoked using @code{return YYACCEPT;}
instead.
@end deffn

@deffn {Macro} YYBACKUP
Macro to discard a value from the parser stack and fake a lookahead
token.  @xref{Action Features, ,Special Features for Use in Actions}.
@end deffn

@deffn {Variable} yychar
External integer variable that contains the integer value of the
lookahead token.  (In a pure parser, it is a local variable within
@code{yyparse}.)  Error-recovery rule actions may examine this variable.
@xref{Action Features, ,Special Features for Use in Actions}.
@end deffn

@deffn {Variable} yyclearin
Macro used in error-recovery rule actions.  It clears the previous
lookahead token.  @xref{Error Recovery}.
@end deffn

@deffn {Macro} YYDEBUG
Macro to define to equip the parser with tracing code.  @xref{Tracing,
,Tracing Your Parser}.
@end deffn

@deffn {Variable} yydebug
External integer variable set to zero by default.  If @code{yydebug}
is given a nonzero value, the parser will output information on input
symbols and parser action.  @xref{Tracing, ,Tracing Your Parser}.
@end deffn

@deffn {Macro} yyerrok
Macro to cause parser to recover immediately to its normal mode
after a syntax error.  @xref{Error Recovery}.
@end deffn

@deffn {Macro} YYERROR
Cause an immediate syntax error.  This statement initiates error
recovery just as if the parser itself had detected an error; however, it
does not call @code{yyerror}, and does not print any message.  If you
want to print an error message, call @code{yyerror} explicitly before
the @samp{YYERROR;} statement.  @xref{Error Recovery}.

For Java parsers, this functionality is invoked using @code{return YYERROR;}
instead.
@end deffn

@deffn {Function} yyerror
User-supplied function to be called by @code{yyparse} on error.
@xref{Error Reporting, ,The Error Reporting Function @code{yyerror}}.
@end deffn

@deffn {Macro} YYERROR_VERBOSE
An obsolete macro used in the @file{yacc.c} skeleton, that you define
with @code{#define} in the prologue to request verbose, specific error
message strings when @code{yyerror} is called.  It doesn't matter what
definition you use for @code{YYERROR_VERBOSE}, just whether you define
it.  Using @samp{%define parse.error verbose} is preferred
(@pxref{Error Reporting, ,The Error Reporting Function @code{yyerror}}).
@end deffn

@deffn {Macro} YYFPRINTF
Macro used to output run-time traces.
@xref{Enabling Traces}.
@end deffn

@deffn {Macro} YYINITDEPTH
Macro for specifying the initial size of the parser stack.
@xref{Memory Management}.
@end deffn

@deffn {Function} yylex
User-supplied lexical analyzer function, called with no arguments to get
the next token.  @xref{Lexical, ,The Lexical Analyzer Function
@code{yylex}}.
@end deffn

@deffn {Variable} yylloc
External variable in which @code{yylex} should place the line and column
numbers associated with a token.  (In a pure parser, it is a local
variable within @code{yyparse}, and its address is passed to
@code{yylex}.)
You can ignore this variable if you don't use the @samp{@@} feature in the
grammar actions.
@xref{Token Locations, ,Textual Locations of Tokens}.
In semantic actions, it stores the location of the lookahead token.
@xref{Actions and Locations, ,Actions and Locations}.
@end deffn

@deffn {Type} YYLTYPE
Data type of @code{yylloc}; by default, a structure with four
members.  @xref{Location Type, , Data Types of Locations}.
@end deffn

@deffn {Variable} yylval
External variable in which @code{yylex} should place the semantic
value associated with a token.  (In a pure parser, it is a local
variable within @code{yyparse}, and its address is passed to
@code{yylex}.)
@xref{Token Values, ,Semantic Values of Tokens}.
In semantic actions, it stores the semantic value of the lookahead token.
@xref{Actions, ,Actions}.
@end deffn

@deffn {Macro} YYMAXDEPTH
Macro for specifying the maximum size of the parser stack.  @xref{Memory
Management}.
@end deffn

@deffn {Variable} yynerrs
Global variable which Bison increments each time it reports a syntax error.
(In a pure parser, it is a local variable within @code{yyparse}. In a
pure push parser, it is a member of @code{yypstate}.)
@xref{Error Reporting, ,The Error Reporting Function @code{yyerror}}.
@end deffn

@deffn {Function} yyparse
The parser function produced by Bison; call this function to start
parsing.  @xref{Parser Function, ,The Parser Function @code{yyparse}}.
@end deffn

@deffn {Macro} YYPRINT
Macro used to output token semantic values.  For @file{yacc.c} only.
Obsoleted by @code{%printer}.
@xref{The YYPRINT Macro, , The @code{YYPRINT} Macro}.
@end deffn

@deffn {Function} yypstate_delete
The function to delete a parser instance, produced by Bison in push mode;
call this function to delete the memory associated with a parser.
@xref{Parser Delete Function, ,The Parser Delete Function
@code{yypstate_delete}}.
(The current push parsing interface is experimental and may evolve.
More user feedback will help to stabilize it.)
@end deffn

@deffn {Function} yypstate_new
The function to create a parser instance, produced by Bison in push mode;
call this function to create a new parser.
@xref{Parser Create Function, ,The Parser Create Function
@code{yypstate_new}}.
(The current push parsing interface is experimental and may evolve.
More user feedback will help to stabilize it.)
@end deffn

@deffn {Function} yypull_parse
The parser function produced by Bison in push mode; call this function to
parse the rest of the input stream.
@xref{Pull Parser Function, ,The Pull Parser Function
@code{yypull_parse}}.
(The current push parsing interface is experimental and may evolve.
More user feedback will help to stabilize it.)
@end deffn

@deffn {Function} yypush_parse
The parser function produced by Bison in push mode; call this function to
parse a single token.  @xref{Push Parser Function, ,The Push Parser Function
@code{yypush_parse}}.
(The current push parsing interface is experimental and may evolve.
More user feedback will help to stabilize it.)
@end deffn

@deffn {Macro} YYRECOVERING
The expression @code{YYRECOVERING ()} yields 1 when the parser
is recovering from a syntax error, and 0 otherwise.
@xref{Action Features, ,Special Features for Use in Actions}.
@end deffn

@deffn {Macro} YYSTACK_USE_ALLOCA
Macro used to control the use of @code{alloca} when the
deterministic parser in C needs to extend its stacks.  If defined to 0,
the parser will use @code{malloc} to extend its stacks.  If defined to
1, the parser will use @code{alloca}.  Values other than 0 and 1 are
reserved for future Bison extensions.  If not defined,
@code{YYSTACK_USE_ALLOCA} defaults to 0.

In the all-too-common case where your code may run on a host with a
limited stack and with unreliable stack-overflow checking, you should
set @code{YYMAXDEPTH} to a value that cannot possibly result in
unchecked stack overflow on any of your target hosts when
@code{alloca} is called.  You can inspect the code that Bison
generates in order to determine the proper numeric values.  This will
require some expertise in low-level implementation details.
@end deffn

@deffn {Type} YYSTYPE
Deprecated in favor of the @code{%define} variable @code{api.value.type}.
Data type of semantic values; @code{int} by default.
@xref{Value Type, ,Data Types of Semantic Values}.
@end deffn

@node Glossary
@appendix Glossary
@cindex glossary

@table @asis
@item Accepting state
A state whose only action is the accept action.
The accepting state is thus a consistent state.
@xref{Understanding, ,Understanding Your Parser}.

@item Backus-Naur Form (BNF; also called ``Backus Normal Form'')
Formal method of specifying context-free grammars originally proposed
by John Backus, and slightly improved by Peter Naur in his 1960-01-02
committee document contributing to what became the Algol 60 report.
@xref{Language and Grammar, ,Languages and Context-Free Grammars}.

@item Consistent state
A state containing only one possible action.  @xref{Default Reductions}.

@item Context-free grammars
Grammars specified as rules that can be applied regardless of context.
Thus, if there is a rule which says that an integer can be used as an
expression, integers are allowed @emph{anywhere} an expression is
permitted.  @xref{Language and Grammar, ,Languages and Context-Free
Grammars}.

@item Default reduction
The reduction that a parser should perform if the current parser state
contains no other action for the lookahead token.  In permitted parser
states, Bison declares the reduction with the largest lookahead set to be
the default reduction and removes that lookahead set.  @xref{Default
Reductions}.

@item Defaulted state
A consistent state with a default reduction.  @xref{Default Reductions}.

@item Dynamic allocation
Allocation of memory that occurs during execution, rather than at
compile time or on entry to a function.

@item Empty string
Analogous to the empty set in set theory, the empty string is a
character string of length zero.

@item Finite-state stack machine
A ``machine'' that has discrete states in which it is said to exist at
each instant in time.  As input to the machine is processed, the
machine moves from state to state as specified by the logic of the
machine.  In the case of the parser, the input is the language being
parsed, and the states correspond to various stages in the grammar
rules.  @xref{Algorithm, ,The Bison Parser Algorithm}.

@item Generalized LR (GLR)
A parsing algorithm that can handle all context-free grammars, including those
that are not LR(1).  It resolves situations that Bison's
deterministic parsing
algorithm cannot by effectively splitting off multiple parsers, trying all
possible parsers, and discarding those that fail in the light of additional
right context.  @xref{Generalized LR Parsing, ,Generalized
LR Parsing}.

@item Grouping
A language construct that is (in general) grammatically divisible;
for example, `expression' or `declaration' in C@.
@xref{Language and Grammar, ,Languages and Context-Free Grammars}.

@item IELR(1) (Inadequacy Elimination LR(1))
A minimal LR(1) parser table construction algorithm.  That is, given any
context-free grammar, IELR(1) generates parser tables with the full
language-recognition power of canonical LR(1) but with nearly the same
number of parser states as LALR(1).  This reduction in parser states is
often an order of magnitude.  More importantly, because canonical LR(1)'s
extra parser states may contain duplicate conflicts in the case of non-LR(1)
grammars, the number of conflicts for IELR(1) is often an order of magnitude
less as well.  This can significantly reduce the complexity of developing a
grammar.  @xref{LR Table Construction}.

@item Infix operator
An arithmetic operator that is placed between the operands on which it
performs some operation.

@item Input stream
A continuous flow of data between devices or programs.

@item LAC (Lookahead Correction)
A parsing mechanism that fixes the problem of delayed syntax error
detection, which is caused by LR state merging, default reductions, and the
use of @code{%nonassoc}.  Delayed syntax error detection results in
unexpected semantic actions, initiation of error recovery in the wrong
syntactic context, and an incorrect list of expected tokens in a verbose
syntax error message.  @xref{LAC}.

@item Language construct
One of the typical usage schemas of the language.  For example, one of
the constructs of the C language is the @code{if} statement.
@xref{Language and Grammar, ,Languages and Context-Free Grammars}.

@item Left associativity
Operators having left associativity are analyzed from left to right:
@samp{a+b+c} first computes @samp{a+b} and then combines with
@samp{c}.  @xref{Precedence, ,Operator Precedence}.

@item Left recursion
A rule whose result symbol is also its first component symbol; for
example, @samp{expseq1 : expseq1 ',' exp;}.  @xref{Recursion, ,Recursive
Rules}.

@item Left-to-right parsing
Parsing a sentence of a language by analyzing it token by token from
left to right.  @xref{Algorithm, ,The Bison Parser Algorithm}.

@item Lexical analyzer (scanner)
A function that reads an input stream and returns tokens one by one.
@xref{Lexical, ,The Lexical Analyzer Function @code{yylex}}.

@item Lexical tie-in
A flag, set by actions in the grammar rules, which alters the way
tokens are parsed.  @xref{Lexical Tie-ins}.

@item Literal string token
A token which consists of two or more fixed characters.  @xref{Symbols}.

@item Lookahead token
A token already read but not yet shifted.  @xref{Lookahead, ,Lookahead
Tokens}.

@item LALR(1)
The class of context-free grammars that Bison (like most other parser
generators) can handle by default; a subset of LR(1).
@xref{Mysterious Conflicts}.

@item LR(1)
The class of context-free grammars in which at most one token of
lookahead is needed to disambiguate the parsing of any piece of input.

@item Nonterminal symbol
A grammar symbol standing for a grammatical construct that can
be expressed through rules in terms of smaller constructs; in other
words, a construct that is not a token.  @xref{Symbols}.

@item Parser
A function that recognizes valid sentences of a language by analyzing
the syntax structure of a set of tokens passed to it from a lexical
analyzer.

@item Postfix operator
An arithmetic operator that is placed after the operands upon which it
performs some operation.

@item Reduction
Replacing a string of nonterminals and/or terminals with a single
nonterminal, according to a grammar rule.  @xref{Algorithm, ,The Bison
Parser Algorithm}.

@item Reentrant
A reentrant subprogram is a subprogram which can be in invoked any
number of times in parallel, without interference between the various
invocations.  @xref{Pure Decl, ,A Pure (Reentrant) Parser}.

@item Reverse polish notation
A language in which all operators are postfix operators.

@item Right recursion
A rule whose result symbol is also its last component symbol; for
example, @samp{expseq1: exp ',' expseq1;}.  @xref{Recursion, ,Recursive
Rules}.

@item Semantics
In computer languages, the semantics are specified by the actions
taken for each instance of the language, i.e., the meaning of
each statement.  @xref{Semantics, ,Defining Language Semantics}.

@item Shift
A parser is said to shift when it makes the choice of analyzing
further input from the stream rather than reducing immediately some
already-recognized rule.  @xref{Algorithm, ,The Bison Parser Algorithm}.

@item Single-character literal
A single character that is recognized and interpreted as is.
@xref{Grammar in Bison, ,From Formal Rules to Bison Input}.

@item Start symbol
The nonterminal symbol that stands for a complete valid utterance in
the language being parsed.  The start symbol is usually listed as the
first nonterminal symbol in a language specification.
@xref{Start Decl, ,The Start-Symbol}.

@item Symbol table
A data structure where symbol names and associated data are stored
during parsing to allow for recognition and use of existing
information in repeated uses of a symbol.  @xref{Multi-function Calc}.

@item Syntax error
An error encountered during parsing of an input stream due to invalid
syntax.  @xref{Error Recovery}.

@item Token
A basic, grammatically indivisible unit of a language.  The symbol
that describes a token in the grammar is a terminal symbol.
The input of the Bison parser is a stream of tokens which comes from
the lexical analyzer.  @xref{Symbols}.

@item Terminal symbol
A grammar symbol that has no rules in the grammar and therefore is
grammatically indivisible.  The piece of text it represents is a token.
@xref{Language and Grammar, ,Languages and Context-Free Grammars}.

@item Unreachable state
A parser state to which there does not exist a sequence of transitions from
the parser's start state.  A state can become unreachable during conflict
resolution.  @xref{Unreachable States}.
@end table

@node Copying This Manual
@appendix Copying This Manual
@include fdl.texi

@node Bibliography
@unnumbered Bibliography

@table @asis
@item [Denny 2008]
Joel E. Denny and Brian A. Malloy, IELR(1): Practical LR(1) Parser Tables
for Non-LR(1) Grammars with Conflict Resolution, in @cite{Proceedings of the
2008 ACM Symposium on Applied Computing} (SAC'08), ACM, New York, NY, USA,
pp.@: 240--245.  @uref{http://dx.doi.org/10.1145/1363686.1363747}

@item [Denny 2010 May]
Joel E. Denny, PSLR(1): Pseudo-Scannerless Minimal LR(1) for the
Deterministic Parsing of Composite Languages, Ph.D. Dissertation, Clemson
University, Clemson, SC, USA (May 2010).
@uref{http://proquest.umi.com/pqdlink?did=2041473591&Fmt=7&clientId=79356&RQT=309&VName=PQD}

@item [Denny 2010 November]
Joel E. Denny and Brian A. Malloy, The IELR(1) Algorithm for Generating
Minimal LR(1) Parser Tables for Non-LR(1) Grammars with Conflict Resolution,
in @cite{Science of Computer Programming}, Vol.@: 75, Issue 11 (November
2010), pp.@: 943--979.  @uref{http://dx.doi.org/10.1016/j.scico.2009.08.001}

@item [DeRemer 1982]
Frank DeRemer and Thomas Pennello, Efficient Computation of LALR(1)
Look-Ahead Sets, in @cite{ACM Transactions on Programming Languages and
Systems}, Vol.@: 4, No.@: 4 (October 1982), pp.@:
615--649. @uref{http://dx.doi.org/10.1145/69622.357187}

@item [Knuth 1965]
Donald E. Knuth, On the Translation of Languages from Left to Right, in
@cite{Information and Control}, Vol.@: 8, Issue 6 (December 1965), pp.@:
607--639. @uref{http://dx.doi.org/10.1016/S0019-9958(65)90426-2}

@item [Scott 2000]
Elizabeth Scott, Adrian Johnstone, and Shamsa Sadaf Hussain,
@cite{Tomita-Style Generalised LR Parsers}, Royal Holloway, University of
London, Department of Computer Science, TR-00-12 (December 2000).
@uref{http://www.cs.rhul.ac.uk/research/languages/publications/tomita_style_1.ps}
@end table

@node Index of Terms
@unnumbered Index of Terms

@printindex cp

@bye

@c LocalWords: texinfo setfilename settitle setchapternewpage finalout texi FSF
@c LocalWords: ifinfo smallbook shorttitlepage titlepage GPL FIXME iftex FSF's
@c LocalWords: akim fn cp syncodeindex vr tp synindex dircategory direntry Naur
@c LocalWords: ifset vskip pt filll insertcopying sp ISBN Etienne Suvasa Multi
@c LocalWords: ifnottex yyparse detailmenu GLR RPN Calc var Decls Rpcalc multi
@c LocalWords: rpcalc Lexer Expr ltcalc mfcalc yylex defaultprec Donnelly Gotos
@c LocalWords: yyerror pxref LR yylval cindex dfn LALR samp gpl BNF xref yypush
@c LocalWords: const int paren ifnotinfo AC noindent emph expr stmt findex lr
@c LocalWords: glr YYSTYPE TYPENAME prog dprec printf decl init stmtMerge POSIX
@c LocalWords: pre STDC GNUC endif yy YY alloca lf stddef stdlib YYDEBUG yypull
@c LocalWords: NUM exp subsubsection kbd Ctrl ctype EOF getchar isdigit nonfree
@c LocalWords: ungetc stdin scanf sc calc ulator ls lm cc NEG prec yyerrok rr
@c LocalWords: longjmp fprintf stderr yylloc YYLTYPE cos ln Stallman Destructor
@c LocalWords: symrec val tptr FNCT fnctptr func struct sym enum IEC syntaxes
@c LocalWords: fnct putsym getsym fname arith fncts atan ptr malloc sizeof Lex
@c LocalWords: strlen strcpy fctn strcmp isalpha symbuf realloc isalnum DOTDOT
@c LocalWords: ptypes itype YYPRINT trigraphs yytname expseq vindex dtype Unary
@c LocalWords: Rhs YYRHSLOC LE nonassoc op deffn typeless yynerrs nonterminal
@c LocalWords: yychar yydebug msg YYNTOKENS YYNNTS YYNRULES YYNSTATES reentrant
@c LocalWords: cparse clex deftypefun NE defmac YYACCEPT YYABORT param yypstate
@c LocalWords: strncmp intval tindex lvalp locp llocp typealt YYBACKUP subrange
@c LocalWords: YYEMPTY YYEOF YYRECOVERING yyclearin GE def UMINUS maybeword loc
@c LocalWords: Johnstone Shamsa Sadaf Hussain Tomita TR uref YYMAXDEPTH inline
@c LocalWords: YYINITDEPTH stmts ref initdcl maybeasm notype Lookahead yyoutput
@c LocalWords: hexflag STR exdent itemset asis DYYDEBUG YYFPRINTF args Autoconf
@c LocalWords: infile ypp yxx outfile itemx tex leaderfill Troubleshouting sqrt
@c LocalWords: hbox hss hfill tt ly yyin fopen fclose ofirst gcc ll lookahead
@c LocalWords: nbar yytext fst snd osplit ntwo strdup AST Troublereporting th
@c LocalWords: YYSTACK DVI fdl printindex IELR nondeterministic nonterminals ps
@c LocalWords: subexpressions declarator nondeferred config libintl postfix LAC
@c LocalWords: preprocessor nonpositive unary nonnumeric typedef extern rhs sr
@c LocalWords: yytokentype destructor multicharacter nonnull EBCDIC nterm LR's
@c LocalWords: lvalue nonnegative XNUM CHR chr TAGLESS tagless stdout api TOK
@c LocalWords: destructors Reentrancy nonreentrant subgrammar nonassociative Ph
@c LocalWords: deffnx namespace xml goto lalr ielr runtime lex yacc yyps env
@c LocalWords: yystate variadic Unshift NLS gettext po UTF Automake LOCALEDIR
@c LocalWords: YYENABLE bindtextdomain Makefile DEFS CPPFLAGS DBISON DeRemer
@c LocalWords: autoreconf Pennello multisets nondeterminism Generalised baz ACM
@c LocalWords: redeclare automata Dparse localedir datadir XSLT midrule Wno
@c LocalWords: Graphviz multitable headitem hh basename Doxygen fno filename
@c LocalWords: doxygen ival sval deftypemethod deallocate pos deftypemethodx
@c LocalWords: Ctor defcv defcvx arg accessors arithmetics CPP ifndef CALCXX
@c LocalWords: lexer's calcxx bool LPAREN RPAREN deallocation cerrno climits
@c LocalWords: cstdlib Debian undef yywrap unput noyywrap nounput zA yyleng
@c LocalWords: errno strtol ERANGE str strerror iostream argc argv Javadoc PSLR
@c LocalWords: bytecode initializers superclass stype ASTNode autoboxing nls
@c LocalWords: toString deftypeivar deftypeivarx deftypeop YYParser strictfp
@c LocalWords: superclasses boolean getErrorVerbose setErrorVerbose deftypecv
@c LocalWords: getDebugStream setDebugStream getDebugLevel setDebugLevel url
@c LocalWords: bisonVersion deftypecvx bisonSkeleton getStartPos getEndPos uint
@c LocalWords: getLVal defvar deftypefn deftypefnx gotos msgfmt Corbett LALR's
@c LocalWords: subdirectory Solaris nonassociativity perror schemas Malloy ints
@c LocalWords: Scannerless ispell american ChangeLog smallexample CSTYPE CLTYPE
@c LocalWords: clval CDEBUG cdebug deftypeopx yyterminate LocationType
@c LocalWords: parsers parser's
@c LocalWords: associativity subclasses precedences unresolvable runnable
@c LocalWords: allocators subunit initializations unreferenced untyped
@c LocalWords: errorVerbose subtype subtypes

@c Local Variables:
@c ispell-dictionary: "american"
@c fill-column: 76
@c End: