utils/Install/sfxzip/match.c

   1 /*---------------------------------------------------------------------------
   2
   3   match.c
   4
   5   The match() routine recursively compares a string to a "pattern" (regular
   6   expression), returning TRUE if a match is found or FALSE if not.  This
   7   version is specifically for use with unzip.c:  as did the previous match()
   8   routines from SEA and J. Kercheval, it leaves the case (upper, lower, or
   9   mixed) of the string alone, but converts any uppercase characters in the
  10   pattern to lowercase if indicated by the global var pInfo->lcflag (which
  11   is to say, string is assumed to have been converted to lowercase already,
  12   if such was necessary).
  13
  14   GRR:  reversed order of text, pattern in matche() (now same as match());
  15         added ignore_case/ic flags, Case() macro.
  16
  17   PaulK:  replaced matche() with recmatch() from Zip, modified to have an
  18           ignore_case argument; replaced test frame with simpler one.
  19
  20   ---------------------------------------------------------------------------
  21
  22   Copyright on recmatch() from Zip's util.c (although recmatch() was almost
  23   certainly written by Mark Adler...ask me how I can tell :-) ):
  24
  25      Copyright (C) 1990-1992 Mark Adler, Richard B. Wales, Jean-loup Gailly,
  26      Kai Uwe Rommel and Igor Mandrichenko.
  27
  28      Permission is granted to any individual or institution to use, copy,
  29      or redistribute this software so long as all of the original files are
  30      included unmodified, that it is not sold for profit, and that this copy-
  31      right notice is retained.
  32
  33   ---------------------------------------------------------------------------
  34
  35   Match the pattern (wildcard) against the string (fixed):
  36
  37      match(string, pattern, ignore_case);
  38
  39   returns TRUE if string matches pattern, FALSE otherwise.  In the pattern:
  40
  41      `*' matches any sequence of characters (zero or more)
  42      `?' matches any single character
  43      [SET] matches any character in the specified set,
  44      [!SET] or [^SET] matches any character not in the specified set.
  45
  46   A set is composed of characters or ranges; a range looks like ``character
  47   hyphen character'' (as in 0-9 or A-Z).  [0-9a-zA-Z_] is the minimal set of
  48   characters allowed in the [..] pattern construct.  Other characters are
  49   allowed (i.e., 8-bit characters) if your system will support them.
  50
  51   To suppress the special syntactic significance of any of ``[]*?!^-\'', in-
  52   side or outside a [..] construct, and match the character exactly, precede
  53   it with a ``\'' (backslash).
  54
  55   Note that "*.*" and "*." are treated specially under MS-DOS if DOSWILD is
  56   defined.  See the DOSWILD section below for an explanation.  Note also
  57   that with VMSWILD defined, '%' is used instead of '?', and sets (ranges)
  58   are delimited by () instead of [].
  59
  60   ---------------------------------------------------------------------------*/
  61
  62
  63
  64 /* define ToLower() in here (for Unix, define ToLower to be macro (using
  65  * isupper()); otherwise just use tolower() */
  66 #define UNZIP_INTERNAL
  67 #include "unzip.h"
  68
  69 #if 0  /* this is not useful until it matches Amiga names insensitively */
  70 #ifdef AMIGA        /* some other platforms might also want to use this */
  71 #  define ANSI_CHARSET       /* MOVE INTO UNZIP.H EVENTUALLY */
  72 #endif
  73 #endif /* 0 */
  74
  75 #ifdef ANSI_CHARSET
  76 #  ifdef ToLower
  77 #    undef ToLower
  78 #  endif
  79    /* uppercase letters are values 41 thru 5A, C0 thru D6, and D8 thru DE */
  80 #  define IsUpper(c) (c>=0xC0 ? c<=0xDE && c!=0xD7 : c>=0x41 && c<=0x5A)
  81 #  define ToLower(c) (IsUpper((uch) c) ? (unsigned) c | 0x20 : (unsigned) c)
  82 #endif
  83 #define Case(x)  (ic? ToLower(x) : (x))
  84
  85 #ifdef VMSWILD
  86 #  define WILDCHAR   '%'
  87 #  define BEG_RANGE  '('
  88 #  define END_RANGE  ')'
  89 #else
  90 #  define WILDCHAR   '?'
  91 #  define BEG_RANGE  '['
  92 #  define END_RANGE  ']'
  93 #endif
  94
  95 #if 0                /* GRR:  add this to unzip.h someday... */
  96 #if !(defined(MSDOS) && defined(DOSWILD))
  97 #define match(s,p,ic)   (recmatch((ZCONST uch *)p,(ZCONST uch *)s,ic) == 1)
  98 int recmatch OF((ZCONST uch *pattern, ZCONST uch *string, int ignore_case));
  99 #endif
 100 #endif /* 0 */
 101 static int recmatch OF((ZCONST uch *pattern, ZCONST uch *string,
 102                         int ignore_case));
 103
 104
 105
 106 /* match() is a shell to recmatch() to return only Boolean values. */
 107
 108 int match(string, pattern, ignore_case)
 109     ZCONST char *string, *pattern;
 110     int ignore_case;
 111 {
 112 #if (defined(MSDOS) && defined(DOSWILD))
 113     char *dospattern;
 114     int j = strlen(pattern);
 115
 116 /*---------------------------------------------------------------------------
 117     Optional MS-DOS preprocessing section:  compare last three chars of the
 118     wildcard to "*.*" and translate to "*" if found; else compare the last
 119     two characters to "*." and, if found, scan the non-wild string for dots.
 120     If in the latter case a dot is found, return failure; else translate the
 121     "*." to "*".  In either case, continue with the normal (Unix-like) match
 122     procedure after translation.  (If not enough memory, default to normal
 123     match.)  This causes "a*.*" and "a*." to behave as MS-DOS users expect.
 124   ---------------------------------------------------------------------------*/
 125
 126     if ((dospattern = (char *)malloc(j+1)) != NULL) {
 127         strcpy(dospattern, pattern);
 128         if (!strcmp(dospattern+j-3, "*.*")) {
 129             dospattern[j-2] = '\0';                    /* nuke the ".*" */
 130         } else if (!strcmp(dospattern+j-2, "*.")) {
 131             char *p = strchr(string, '.');
 132
 133             if (p) {   /* found a dot:  match fails */
 134                 free(dospattern);
 135                 return 0;
 136             }
 137             dospattern[j-1] = '\0';                    /* nuke the end "." */
 138         }
 139         j = recmatch((uch *)dospattern, (uch *)string, ignore_case);
 140         free(dospattern);
 141         return j == 1;
 142     } else
 143 #endif /* MSDOS && DOSWILD */
 144     return recmatch((uch *)pattern, (uch *)string, ignore_case) == 1;
 145 }
 146
 147
 148
 149 static int recmatch(p, s, ic)
 150     ZCONST uch *p;        /* sh pattern to match */
 151     ZCONST uch *s;        /* string to which to match it */
 152     int ic;               /* true for case insensitivity */
 153 /* Recursively compare the sh pattern p with the string s and return 1 if
 154  * they match, and 0 or 2 if they don't or if there is a syntax error in the
 155  * pattern.  This routine recurses on itself no more deeply than the number
 156  * of characters in the pattern. */
 157 {
 158     unsigned int c;       /* pattern char or start of range in [-] loop */
 159
 160     /* Get first character, the pattern for new recmatch calls follows */
 161     c = *p++;
 162
 163     /* If that was the end of the pattern, match if string empty too */
 164     if (c == 0)
 165         return *s == 0;
 166
 167     /* '?' (or '%') matches any character (but not an empty string) */
 168     if (c == WILDCHAR)
 169         return *s ? recmatch(p, s + 1, ic) : 0;
 170
 171     /* '*' matches any number of characters, including zero */
 172 #ifdef AMIGA
 173     if (c == '#' && *p == '?')     /* "#?" is Amiga-ese for "*" */
 174         c = '*', p++;
 175 #endif /* AMIGA */
 176     if (c == '*') {
 177         if (*p == 0)
 178             return 1;
 179         for (; *s; s++)
 180             if ((c = recmatch(p, s, ic)) != 0)
 181                 return (int)c;
 182         return 2;       /* 2 means give up--match will return false */
 183     }
 184
 185     /* Parse and process the list of characters and ranges in brackets */
 186     if (c == BEG_RANGE) {
 187         int e;          /* flag true if next char to be taken literally */
 188         ZCONST uch *q;  /* pointer to end of [-] group */
 189         int r;          /* flag true to match anything but the range */
 190
 191         if (*s == 0)                           /* need a character to match */
 192             return 0;
 193         p += (r = (*p == '!' || *p == '^'));   /* see if reverse */
 194         for (q = p, e = 0; *q; q++)            /* find closing bracket */
 195             if (e)
 196                 e = 0;
 197             else
 198                 if (*q == '\\')      /* GRR:  change to ^ for MS-DOS, OS/2? */
 199                     e = 1;
 200                 else if (*q == END_RANGE)
 201                     break;
 202         if (*q != END_RANGE)         /* nothing matches if bad syntax */
 203             return 0;
 204         for (c = 0, e = *p == '-'; p < q; p++) {  /* go through the list */
 205             if (e == 0 && *p == '\\')             /* set escape flag if \ */
 206                 e = 1;
 207             else if (e == 0 && *p == '-')         /* set start of range if - */
 208                 c = *(p-1);
 209             else {
 210                 unsigned int cc = Case(*s);
 211
 212                 if (*(p+1) != '-')
 213                     for (c = c ? c : *p; c <= *p; c++)  /* compare range */
 214                         if ((unsigned)Case(c) == cc)  /* typecast for MSC bug */
 215                             return r ? 0 : recmatch(q + 1, s + 1, ic);
 216                 c = e = 0;   /* clear range, escape flags */
 217             }
 218         }
 219         return r ? recmatch(q + 1, s + 1, ic) : 0;  /* bracket match failed */
 220     }
 221
 222     /* if escape ('\'), just compare next character */
 223     if (c == '\\' && (c = *p++) == 0)     /* if \ at end, then syntax error */
 224         return 0;
 225
 226     /* just a character--compare it */
 227 #ifdef QDOS
 228     return QMatch(Case((uch)c), Case(*s)) ? recmatch(p, ++s, ic) : 0;
 229 #else
 230     return Case((uch)c) == Case(*s) ? recmatch(p, ++s, ic) : 0;
 231 #endif
 232
 233 } /* end function recmatch() */
 234
 235
 236
 237
 238
 239 int iswild(p)        /* originally only used for stat()-bug workaround in */
 240     ZCONST char *p;  /*  VAX C, Turbo/Borland C, Watcom C, Atari MiNT libs; */
 241 {                    /*  now used in process_zipfiles() as well */
 242     for (; *p; ++p)
 243         if (*p == '\\' && *(p+1))
 244             ++p;
 245 #ifdef VMS
 246         else if (*p == '%' || *p == '*')
 247 #else /* !VMS */
 248 #ifdef AMIGA
 249         else if (*p == '?' || *p == '*' || (*p=='#' && p[1]=='?') || *p == '[')
 250 #else /* !AMIGA */
 251         else if (*p == '?' || *p == '*' || *p == '[')
 252 #endif /* ?AMIGA */
 253 #endif /* ?VMS */
 254 #ifdef QDOS
 255             return (int)p;
 256 #else
 257             return TRUE;
 258 #endif
 259
 260     return FALSE;
 261
 262 } /* end function iswild() */
 263
 264
 265
 266
 267
 268 #ifdef TEST_MATCH
 269
 270 #define put(s) {fputs(s,stdout); fflush(stdout);}
 271
 272 void main()
 273 {
 274     char pat[256], str[256];
 275
 276     for (;;) {
 277         put("Pattern (return to exit): ");
 278         gets(pat);
 279         if (!pat[0])
 280             break;
 281         for (;;) {
 282             put("String (return for new pattern): ");
 283             gets(str);
 284             if (!str[0])
 285                 break;
 286             pipeit("Case sensitive: %s  insensitive: %s\n",
 287               match(str, pat, 0) ? "YES" : "NO",
 288               match(str, pat, 1) ? "YES" : "NO");
 289         }
 290     }
 291     EXIT(0);
 292 }
 293
 294 #endif /* TEST_MATCH */