don't strip :any from dependencies in single-arch

[apt.git] / test / integration / framework

diff --git a/test/integration/framework b/test/integration/framework
index f64b8482c10d1a92adf2b09379ef482e7a829209..4003d932cfffa8b25ff40a547d4fd42500799abf 100644 (file)
--- a/test/integration/framework
+++ b/test/integration/framework
@@ -88,11 +88,11 @@ msgdone() {
 runapt() {
        msgdebug "Executing: ${CCMD}$*${CDEBUG} "
        if [ -f ./aptconfig.conf ]; then
 runapt() {
        msgdebug "Executing: ${CCMD}$*${CDEBUG} "
        if [ -f ./aptconfig.conf ]; then

-               APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
-        elif [ -f ../aptconfig.conf ]; then
-                APT_CONFIG=../aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
+               MALLOC_PERTURB_=21 MALLOC_CHECK_=2 APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
+       elif [ -f ../aptconfig.conf ]; then
+               MALLOC_PERTURB_=21 MALLOC_CHECK_=2 APT_CONFIG=../aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*

        else
        else

-               LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
+               MALLOC_PERTURB_=21 MALLOC_CHECK_=2 LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*

        fi
 }
 aptconfig() { runapt apt-config $*; }
        fi
 }
 aptconfig() { runapt apt-config $*; }


@@ -131,13 +131,23 @@ exitwithstatus() {
         exit $((EXIT_CODE <= 255 ? EXIT_CODE : 255));
 }
 
         exit $((EXIT_CODE <= 255 ? EXIT_CODE : 255));
 }
 

+shellsetedetector() {
+       local exit_status=$?
+       if [ "$exit_status" != '0' ]; then
+               echo >&2 "${CERROR}E: Looks like the testcases ended prematurely with exitcode: ${exit_status}${CNORMAL}"
+               if [ "$EXIT_CODE" = '0' ]; then
+                       EXIT_CODE="$exit_status"
+               fi
+       fi
+}
+

 addtrap() {
        if [ "$1" = 'prefix' ]; then
                CURRENTTRAP="$2 $CURRENTTRAP"
        else
                CURRENTTRAP="$CURRENTTRAP $1"
        fi
 addtrap() {
        if [ "$1" = 'prefix' ]; then
                CURRENTTRAP="$2 $CURRENTTRAP"
        else
                CURRENTTRAP="$CURRENTTRAP $1"
        fi

-       trap "$CURRENTTRAP exitwithstatus;" 0 HUP INT QUIT ILL ABRT FPE SEGV PIPE TERM
+       trap "shellsetedetector; $CURRENTTRAP exitwithstatus;" 0 HUP INT QUIT ILL ABRT FPE SEGV PIPE TERM

 }
 
 setupenvironment() {
 }
 
 setupenvironment() {


@@ -177,13 +187,14 @@ setupenvironment() {
        echo "DPKG::options:: \"--root=${TMPWORKINGDIRECTORY}/rootdir\";" >> aptconfig.conf
        echo "DPKG::options:: \"--force-not-root\";" >> aptconfig.conf
        echo "DPKG::options:: \"--force-bad-path\";" >> aptconfig.conf
        echo "DPKG::options:: \"--root=${TMPWORKINGDIRECTORY}/rootdir\";" >> aptconfig.conf
        echo "DPKG::options:: \"--force-not-root\";" >> aptconfig.conf
        echo "DPKG::options:: \"--force-bad-path\";" >> aptconfig.conf

-       if ! $(which dpkg) --assert-multi-arch 2>&1 > /dev/null; then
+       if ! $(which dpkg) --assert-multi-arch >/dev/null 2>&1; then

                echo "DPKG::options:: \"--force-architecture\";" >> aptconfig.conf # Added to test multiarch before dpkg is ready for it…
        fi
        echo "DPKG::options:: \"--log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log\";" >> aptconfig.conf
        echo 'quiet::NoUpdate "true";' >> aptconfig.conf
        export LC_ALL=C
        export PATH="${PATH}:/usr/local/sbin:/usr/sbin:/sbin"
                echo "DPKG::options:: \"--force-architecture\";" >> aptconfig.conf # Added to test multiarch before dpkg is ready for it…
        fi
        echo "DPKG::options:: \"--log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log\";" >> aptconfig.conf
        echo 'quiet::NoUpdate "true";' >> aptconfig.conf
        export LC_ALL=C
        export PATH="${PATH}:/usr/local/sbin:/usr/sbin:/sbin"

+       configcompression '.' 'gz' #'bz2' 'lzma' 'xz'

        msgdone "info"
 }
 
        msgdone "info"
 }
 


@@ -225,12 +236,18 @@ configdpkg() {
                        echo -n > rootdir/var/lib/dpkg/status
                fi
        fi
                        echo -n > rootdir/var/lib/dpkg/status
                fi
        fi

-       if $(which dpkg) --assert-multi-arch 2>&1 > /dev/null; then
+       if $(which dpkg) --assert-multi-arch >/dev/null 2>&1; then

                local ARCHS="$(getarchitectures)"
                if echo "$ARCHS" | grep -E -q '[^ ]+ [^ ]+'; then
                        DPKGARCH="$(dpkg --print-architecture)"
                        for ARCH in ${ARCHS}; do
                local ARCHS="$(getarchitectures)"
                if echo "$ARCHS" | grep -E -q '[^ ]+ [^ ]+'; then
                        DPKGARCH="$(dpkg --print-architecture)"
                        for ARCH in ${ARCHS}; do

-                               if [ "${ARCH}" != "${DPKGARCH}" ]; then dpkg --add-architecture ${ARCH}; fi
+                               if [ "${ARCH}" != "${DPKGARCH}" ]; then
+                                       if ! dpkg --add-architecture ${ARCH}; then
+                                               # old-style used e.g. in Ubuntu-P – and as it seems travis
+                                               echo "DPKG::options:: \"--foreign-architecture\";" >> aptconfig.conf
+                                               echo "DPKG::options:: \"${ARCH}\";" >> aptconfig.conf
+                                       fi
+                               fi

                        done
                        if [ "0" = "$(dpkg -l dpkg 2> /dev/null | grep '^i' | wc -l)" ]; then
                                # dpkg doesn't really check the version as long as it is fully installed,
                        done
                        if [ "0" = "$(dpkg -l dpkg 2> /dev/null | grep '^i' | wc -l)" ]; then
                                # dpkg doesn't really check the version as long as it is fully installed,


@@ -241,6 +258,20 @@ configdpkg() {
        fi
 }
 
        fi
 }
 

+configcompression() {
+       while [ -n "$1" ]; do
+               case "$1" in
+               '.') echo ".\t.\tcat";;
+               'gz') echo "gzip\tgz\tgzip";;
+               'bz2') echo "bzip2\tbz2\tbzip2";;
+               'lzma') echo "lzma\tlzma\txz --format=lzma";;
+               'xz') echo "xz\txz\txz";;
+               *) echo "$1\t$1\t$1";;
+               esac
+               shift
+       done > ${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf
+}
+

 setupsimplenativepackage() {
        local NAME="$1"
        local ARCH="$2"
 setupsimplenativepackage() {
        local NAME="$1"
        local ARCH="$2"


@@ -411,6 +442,8 @@ buildaptarchive() {
 }
 
 createaptftparchiveconfig() {
 }
 
 createaptftparchiveconfig() {

+       local COMPRESSORS="$(cut -d'    ' -f 1 ${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf | tr '\n' ' ')"
+       COMPRESSORS="${COMPRESSORS%* }"

        local ARCHS="$(find pool/ -name '*.deb' | grep -oE '_[a-z0-9-]+\.deb$' | sort | uniq | sed -e '/^_all.deb$/ d' -e 's#^_\([a-z0-9-]*\)\.deb$#\1#' | tr '\n' ' ')"
        if [ -z "$ARCHS" ]; then
                # the pool is empty, so we will operate on faked packages - let us use the configured archs
        local ARCHS="$(find pool/ -name '*.deb' | grep -oE '_[a-z0-9-]+\.deb$' | sort | uniq | sed -e '/^_all.deb$/ d' -e 's#^_\([a-z0-9-]*\)\.deb$#\1#' | tr '\n' ' ')"
        if [ -z "$ARCHS" ]; then
                # the pool is empty, so we will operate on faked packages - let us use the configured archs


@@ -428,10 +461,10 @@ createaptftparchiveconfig() {
        echo -n '";
 };
 Default {
        echo -n '";
 };
 Default {

-       Packages::Compress ". gzip bzip2 lzma xz";
-       Sources::Compress ". gzip bzip2 lzma xz";
-       Contents::Compress ". gzip bzip2 lzma xz";
-       Translation::Compress ". gzip bzip2 lzma xz";
+       Packages::Compress "'"$COMPRESSORS"'";
+       Sources::Compress "'"$COMPRESSORS"'";
+       Contents::Compress "'"$COMPRESSORS"'";
+       Translation::Compress "'"$COMPRESSORS"'";

        LongDescription "false";
 };
 TreeDefault {
        LongDescription "false";
 };
 TreeDefault {


@@ -601,18 +634,27 @@ buildaptarchivefromfiles() {
        msginfo "Build APT archive for ${CCMD}$(basename $0)${CINFO} based on prebuild files…"
        find aptarchive -name 'Packages' -o -name 'Sources' | while read line; do
                msgninfo "\t${line} file… "
        msginfo "Build APT archive for ${CCMD}$(basename $0)${CINFO} based on prebuild files…"
        find aptarchive -name 'Packages' -o -name 'Sources' | while read line; do
                msgninfo "\t${line} file… "

-               cat ${line} | gzip > ${line}.gz
-               cat ${line} | bzip2 > ${line}.bz2
-               cat ${line} | xz --format=lzma > ${line}.lzma
-               cat ${line} | xz > ${line}.xz
-               if [ -n "$1" ]; then
-                       touch -d "$1" ${line}.gz ${line}.bz2 ${line}.lzma ${line}.xz
-               fi
+               compressfile "$line" "$1"

                msgdone "info"
        done
        generatereleasefiles "$@"
 }
 
                msgdone "info"
        done
        generatereleasefiles "$@"
 }
 

+compressfile() {
+       cat ${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf | while read compressor extension command; do
+               if [ "$compressor" = '.' ]; then
+                       if [ -n "$2" ]; then
+                               touch -d "$2" "$1"
+                       fi
+                       continue
+               fi
+               cat "$1" | $command > "${1}.${extension}"
+               if [ -n "$2" ]; then
+                       touch -d "$2" "${1}.${extension}"
+               fi
+       done
+}
+

 # can be overridden by testcases for their pleasure
 getcodenamefromsuite() { echo -n "$1"; }
 getreleaseversionfromsuite() { true; }
 # can be overridden by testcases for their pleasure
 getcodenamefromsuite() { echo -n "$1"; }
 getreleaseversionfromsuite() { true; }


@@ -851,7 +893,7 @@ testequalor2() {
        echo "$2" > $COMPAREFILE2
        shift 2
        msgtest "Test for equality OR of" "$*"
        echo "$2" > $COMPAREFILE2
        shift 2
        msgtest "Test for equality OR of" "$*"

-       $* 2>&1 1> $COMPAREAGAINST
+       $* >$COMPAREAGAINST 2>&1

        (checkdiff $COMPAREFILE1 $COMPAREAGAINST 1> /dev/null ||
                checkdiff $COMPAREFILE2 $COMPAREAGAINST 1> /dev/null) && msgpass ||
                ( echo "\n${CINFO}Diff against OR 1${CNORMAL}" "$(checkdiff $COMPAREFILE1 $COMPAREAGAINST)" \
        (checkdiff $COMPAREFILE1 $COMPAREAGAINST 1> /dev/null ||
                checkdiff $COMPAREFILE2 $COMPAREAGAINST 1> /dev/null) && msgpass ||
                ( echo "\n${CINFO}Diff against OR 1${CNORMAL}" "$(checkdiff $COMPAREFILE1 $COMPAREAGAINST)" \


@@ -928,6 +970,40 @@ testmarkedauto() {
        aptmark showauto 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
 }
 
        aptmark showauto 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
 }
 

+testsuccess() {
+       if [ "$1" = '--nomsg' ]; then
+               shift
+       else
+               msgtest 'Test for successful execution of' "$*"
+       fi
+       local OUTPUT=$(mktemp)
+       addtrap "rm $OUTPUT;"
+       if $@ >${OUTPUT} 2>&1; then
+               msgpass
+       else
+               echo
+               cat $OUTPUT
+               msgfail
+       fi
+}
+
+testfailure() {
+       if [ "$1" = '--nomsg' ]; then
+               shift
+       else
+               msgtest 'Test for failure in  execution of' "$*"
+       fi
+       local OUTPUT=$(mktemp)
+       addtrap "rm $OUTPUT;"
+       if $@ >${OUTPUT} 2>&1; then
+               echo
+               cat $OUTPUT
+               msgfail
+       else
+               msgpass
+       fi
+}
+

 pause() {
        echo "STOPPED execution. Press enter to continue"
        local IGNORE
 pause() {
        echo "STOPPED execution. Press enter to continue"
        local IGNORE