--- /dev/null
+\documentstyle[a4,11pt,makeidx,verbatim,texhelp,fancyheadings,palatino]{report}
+% JACS: doesn't make it through Tex2RTF, sorry. I will put it into texhelp.sty
+% since Tex2RTF doesn't parse it.
+% BTW, style MUST be report for it to work for Tex2RTF.
+%KB:
+%\addtolength{\textwidth}{1in}
+%\addtolength{\oddsidemargin}{-0.5in}
+%\addtolength{\topmargin}{-0.5in}
+%\addtolength{\textheight}{1in}
+%\sloppy
+%end of my changes
+\newcommand{\indexit}[1]{#1\index{#1}}%
+\newcommand{\pipe}[0]{$\|$\ }%
+\definecolour{black}{0}{0}{0}%
+\definecolour{cyan}{0}{255}{255}%
+\definecolour{green}{0}{255}{0}%
+\definecolour{magenta}{255}{0}{255}%
+\definecolour{red}{255}{0}{0}%
+\definecolour{blue}{0}{0}{200}%
+\definecolour{yellow}{255}{255}{0}%
+\definecolour{white}{255}{255}{255}%
+%
+\input psbox.tex
+% Remove this for processing with dvi2ps instead of dvips
+%\special{!/@scaleunit 1 def}
+\parskip=10pt
+\parindent=0pt
+\title{Multiplatform application development with wxWindows}
+\winhelponly{\author{by Julian Smart et al
+%\winhelponly{\\$$\image{1cm;0cm}{wxwin.wmf}$$}
+}}
+\winhelpignore{\author{Julian Smart, Robert Roebling, Vadim Zeitlin,
+Robin Dunn, et al}
+\date{August 13th 2000}
+}
+\makeindex
+\begin{document}
+\maketitle
+\pagestyle{fancyplain}
+\bibliographystyle{plain}
+\setheader{{\it CONTENTS}}{}{}{}{}{{\it CONTENTS}}
+\setfooter{\thepage}{}{}{}{}{\thepage}%
+\pagenumbering{roman}
+\tableofcontents
+
+\input chap\_intro.tex % Chapter 01: Introduction, advocacy, etc.
+\input chap\_install.tex % Chapter 02: Installing wxWindows (and what tools to use)
+\input chap\_cpp.tex % Chapter 03: C++ and wxWindows. Summarises the sorts of constructs used/not used, plus wxString class, some conventions. Vadim suggests putting it in 1st chapter but I think it deserves a chapter of its own.
+\input chap\_getstart.tex % Chapter 04: Getting started: Hello World. Introduces app class, frames, menus, status bar, message box
+\input chap\_basic\_events.tex % Chapter 05: Basic event handling
+\input chap\_frames.tex % Chapter 06: Frames and menubars. The components of a frame, menubars.
+\input chap\_toolbars.tex % Chapter 07: Toolbars and status bars
+\input chap\_basic\_controls.tex % Chapter 08: Basic controls
+\input chap\_common\_dialogs.tex % Chapter 09: Common dialogs
+\input chap\_custom\_dialogs.tex % Chapter 10: Custom dialogs and resources (XML + WXR)
+\input chap\_drawing.tex % Chapter 11: Drawing on device contexts
+\input chap\_input.tex % Chapter 12: Handling input (mouse, keyboard, joystick)
+\input chap\_sizers.tex % Chapter 14: Sizers
+\input chap\_images.tex % Chapter 15: Images and bitmaps
+\input chap\_clipboard\_dnd.tex % Chapter 16: Clipboard and drag and drop
+\input chap\_advanced\_controls.tex % Chapter 17: Advanced controls (list,tree,notebook,splitter,wxWizard,wxCalCtrl...)
+\input chap\_docview.tex % Chapter 18: Document/view classes
+\input chap\_scrolling.tex % Chapter 19: Scrolling
+\input chap\_mdi.tex % Chapter 20: MDI
+\input chap\_printing.tex % Chapter 21: Printing
+\input chap\_help.tex % Chapter 22: Providing help in your applications
+\input chap\_strings.tex % Chapter 23: Strings and internationalization
+\input chap\_data\_classes.tex % Chapter 24: Collection and container classes
+\input chap\_memory.tex % Chapter 25: Memory management and debugging (including wxLog)
+\input chap\_runtime.tex % Chapter 26: Run-time class information
+\input chap\_advanced\_events.tex % Chapter 27: Advanced event handling (user-defined events, ...)
+\input chap\_comms.tex % Chapter 28: Communication classes, including wxSocket
+\input chap\_database.tex % Chapter 29: Database classes
+\input chap\_file\_stream.tex % Chapter 30: File and stream classes
+\input chap\_config.tex % Chapter 31: Configuration classes
+\input chap\_time.tex % Chapter 32: Time, timers and idle processing
+\input chap\_multithreading.tex % Chapter 33: Writing multithreading applications
+\input chap\_perfecting.tex % Chapter 34: Perfecting your UI (Adapting to system settings, accelerators, ...)
+\input chap\_platform.tex % Chapter 35: Platform-specific programming (metafiles, OLE automation, taskbar, ...)
+\input chap\_wxhtml.tex % Chapter 36: Using wxHTML
+\input chap\_wxpython.tex % Chapter 37: Using wxPython
+\input chap\_wxbase.tex % Chapter 38: wxBase?
+\input chap\_comparison.tex % Appendix: Comparison with other toolkits: MFC, Qt etc.
+
+\bibliography{refs}
+\addcontentsline{toc}{chapter}{Bibliography}
+\setheader{{\it REFERENCES}}{}{}{}{}{{\it REFERENCES}}%
+\setfooter{\thepage}{}{}{}{}{\thepage}%
+
+\newpage
+% Note: In RTF, the \printindex must come before the
+% change of header/footer, since the \printindex inserts
+% the RTF \sect command which divides one chapter from
+% the next.
+\rtfonly{\printindex
+\addcontentsline{toc}{chapter}{Index}
+\setheader{{\it INDEX}}{}{}{}{}{{\it INDEX}}%
+\setfooter{\thepage}{}{}{}{}{\thepage}
+}
+% In Latex, it must be this way around (I think)
+\latexonly{\addcontentsline{toc}{chapter}{Index}
+\setheader{{\it INDEX}}{}{}{}{}{{\it INDEX}}%
+\setfooter{\thepage}{}{}{}{}{\thepage}
+\printindex
+}
+
+\end{document}
--- /dev/null
+% LaTeX style file
+% Name: texhelp.sty
+% Author: Julian Smart
+%
+% Purpose
+% -------
+% Style file to enable the simultaneous preparation of printed LaTeX and on-line
+% hypertext manuals.
+% Use in conjunction with Tex2RTF (see Tex2RTF documentation).
+%
+% Note that if a non-ASCII character starts a newline and there should be a space
+% between the last word on the previous line and the first word on this line,
+% you need to use \rtfsp to generate a space in Windows Help. \rtfsp is ignored
+% in all other formats.
+%
+% Julian Smart
+% Artificial Intelligence Applications Institute
+%
+%
+% ============== C++/CLIPS Documentation Facilities ==============
+%
+% Each class definition should be typeset with e.g.
+%
+% \section{\class{Name}: Parent}
+%
+% followed by a description of the class.
+% Each member should follow:
+%
+% \membersection{wxName::Member}
+%
+% with a description of what this member does.
+% Then, one (or more if overloaded) member (function) in detail:
+%
+% \func{return type}{name}{args}
+% or
+% \member{type}{name}
+%
+% where args is a list of \param{type}{name}, ...
+
+% Function, e.g.
+% e.g. to typeset
+%
+% void DoIt(char *string);
+%
+% write:
+%
+% \func{void}{DoIt}{\param{char *}{string}}
+%
+
+\newcommand{\func}[3]{\hangafter=1\noindent\hangindent=10mm
+{{\it #1} {\bf #2}\index{#2}}(#3)}
+
+% For function/type definition where the name is a pointer,
+% e.g. to typeset
+%
+% typedef void (*wxFunction)(wxObject&)
+%
+% write:
+%
+% \pfunc{typedef void}{wxFunction}{param{wxObject&}}
+
+\newcommand{\pfunc}[3]{\hangafter=1\noindent\hangindent=10mm
+{{\it #1} ({\bf *#2})\index{#2}}(#3)}
+
+% Use an ordinary \section command for class name definitions.
+
+% This is used for a member, such as wxBitmap: GetDepth
+\newcommand{\membersection}[1]{\subsection*{#1}\index{#1}}
+
+% CLIPS function
+\newcommand{\clipsfunc}[3]{\hangafter=1\noindent\hangindent=10mm
+{{\bf #1} ({\bf #2}\index{#2}}#3)}
+
+\newcommand{\clipssection}[1]{\chapter{#1}}
+
+% This is used for a CLIPS function name
+\newcommand{\functionsection}[1]{\subsection*{#1}}
+
+% Member: a type and a name
+\newcommand{\member}[2]{{\bf #1 \it #2}}
+
+% C++ Parameter: a type and a name (no intervening space)
+\newcommand{\param}[2]{{\it #1}{\bf #2}}
+
+% CLIPS Parameter: a type and a name (one intervening space)
+\newcommand{\cparam}[2]{{\bf #1} {\it #2}}
+
+% Class: puts in index
+\newcommand{\class}[1]{#1\index{#1}}
+
+%\newcommand{\docparam}[2]{\parskip=0pt {\it #1}\par\parskip=10pt\begin{indented}{1cm}{#2}\end{indented}}
+
+% Void type
+\newcommand{\void}{{\it void}}
+
+% Typeset destructor
+\newcommand{\destruct}[1]{{$\sim$}#1}
+
+% Typeset insert/extract operators
+\newcommand{\cinsert}{$<<$}
+\newcommand{\cextract}{$>>$}
+
+% pythonnote: A note about the wxpython interface.
+%\newcommand{\pythonnote}[1]{{\bf wxPython note: }#1}
+\newcommand{\pythonnote}[1]{{}}
+
+% =================== Hypertext facilities ===================
+%
+% To insert hyperlinks (or references, in Latex), \label the sections
+% or membersections \label{ref-label} immediately after the section, on the same line,
+% and use \helpref{text-to-show}{ref-label} to make a reference.
+%
+
+% Type text with section reference
+\newcommand{\helpref}[2]{{\it #1} (p.\ \pageref{#2}) }
+
+% Type text with URL in verbatim mode
+\newcommand{\urlref}[2]{#1 (\verb$#2$)}
+
+% Don't typeset section number in LaTeX
+\newcommand{\helprefn}[2]{{\it #1}}
+
+% Like helpref, but popup text in WinHelp instead of hyperlinked
+\newcommand{\popref}[2]{{\it #1}}
+
+% Like footnote, but popup text.
+\newcommand{\footnotepopup}[2]{{\it #1}\footnote{#2}}
+
+% =================== On-line help specific macros ===================
+%
+
+% Global document font size/family, help only.
+\newcommand{\helpfontsize}[1]{}
+\newcommand{\helpfontfamily}[1]{}
+
+% Ignore in all on-line help
+\newcommand{\helpignore}[1]{#1}
+% Only print in all on-line help
+\newcommand{\helponly}[1]{}
+
+% Ignore in LaTeX
+\newcommand{\latexignore}[1]{}
+% Only print in LaTeX
+\newcommand{\latexonly}[1]{#1}
+
+% Ignore in linear RTF
+\newcommand{\rtfignore}[1]{#1}
+% Only print in linear RTF
+\newcommand{\rtfonly}[1]{}
+
+% Ignore in WinHelp RTF
+\newcommand{\winhelpignore}[1]{#1}
+% Only print in WinHelp RTF
+\newcommand{\winhelponly}[1]{}
+
+% Ignore in wxHelp
+\newcommand{\xlpignore}[1]{#1}
+% Only print in wxHelp
+\newcommand{\xlponly}[1]{}
+
+% Ignore in HTML
+\newcommand{\htmlignore}[1]{#1}
+% Only print in HTML
+\newcommand{\htmlonly}[1]{}
+
+% Input a file only for help system (binder thickness is not a limitation
+% in help systems!)
+\newcommand{\helpinput}[1]{}
+
+\newcommand{\rtfsp}{ } % Force a space in RTF, ignore in Latex
+
+% =================== Miscellaneous macros ===================
+%
+% Headings consistent with generated ones
+\newcommand{\myheading}[1]{\vspace*{25pt}
+\begin{flushleft}
+{\LARGE \bf #1}
+\end{flushleft}
+\vskip 20pt
+}
+
+% Heading with entry in contents page.
+\newcommand{\chapterheading}[1]{\myheading{#1}
+\addcontentsline{toc}{chapter}{#1}}
+
+\newcommand{\sectionheading}[1]{\myheading{#1}
+\addcontentsline{toc}{section}{#1}}
+
+% Glossary environment
+\newenvironment{helpglossary}{\newpage\chapterheading{Glossary}\begin{description}}{\end{description}}
+
+% Glossary entry
+\newcommand{\gloss}[1]{\item[#1]\index{#1}}
+
+% Image: EPS in Latex, BMP or MF (whatever's available) in RTF. Requires psbox.
+\newcommand{\image}[2]{\psboxto(#1){#2}}
+
+% Image, left aligned (HTML)
+\newcommand{\imager}[2]{\psboxto(#1){#2}}
+
+% Image, right aligned (HTML)
+\newcommand{\imagel}[2]{\psboxto(#1){#2}}
+
+% Imagemap: principally for HTML only. In Latex,
+% acts like \image.
+\newcommand{\imagemap}[3]{\psboxto(#1){#2}}
+
+% Headers and footers
+% \setheader{EvenPageLeft}{EvenPageCentre}{EvenPageRight}
+% {OddPageLeft}{OddPageCentre}{OddPageRight}
+\newcommand{\setheader}[6]{
+\lhead[\fancyplain{}{#1}]{\fancyplain{}{#4}}
+\chead[\fancyplain{}{#2}]{\fancyplain{}{#5}}
+\rhead[\fancyplain{}{#3}]{\fancyplain{}{#6}}
+}
+
+% \setfooter{EvenPageLeft}{EvenPageCentre}{EvenPageRight}
+% {OddPageLeft}{OddPageCentre}{OddPageRight}
+\newcommand{\setfooter}[6]{
+\lfoot[\fancyplain{#1}{#1}]{\fancyplain{#4}{#4}}
+\cfoot[\fancyplain{#2}{#2}]{\fancyplain{#5}{#5}}
+\rfoot[\fancyplain{#3}{#3}]{\fancyplain{#6}{#6}}
+}
+
+% Needed for telling RTF where margin paragraph should go
+% in mirrored margins mode.
+\newcommand{\marginpareven}[1]{\hspace*{0pt}\marginpar{#1}}
+\newcommand{\marginparodd}[1]{\hspace*{0pt}\marginpar{#1}}
+
+% Environment for two-column table popular in WinHelp and manuals.
+\newcommand{\twocolwidtha}[1]{\def\twocolwidthaval{#1}}
+\newcommand{\twocolwidthb}[1]{\def\twocolwidthbval{#1}}
+\newcommand{\twocolspacing}[1]{\def\twocolspacingval{#1}}
+
+\twocolwidtha{3cm}
+\twocolwidthb{8.5cm}
+\twocolspacing{2}
+
+\newcommand{\twocolitem}[2]{#1 & #2\\}
+\newcommand{\twocolitemruled}[2]{#1 & #2\\\hline}
+
+\newenvironment{twocollist}{\renewcommand{\arraystretch}{\twocolspacingval}\begin{tabular}{lp{\twocolwidthbval}}}%
+{\end{tabular}\renewcommand{\arraystretch}{1}}
+
+% Specifying table rows for RTF compatibility
+\newcommand{\row}[1]{#1\\}
+
+% Use for the last ruled row for correct RTF generation.
+\newcommand{\ruledrow}[1]{#1\\\hline}
+
+% Indentation environment. Arg1 is left margin size
+\newenvironment{indented}[1]{\begin{list}{}{\leftmargin=#1}\item[]}%
+{\end{list}}
+
+% Framed box of text, normal formatting.
+\newcommand{\normalbox}[1]{\fbox{\vbox{#1}}}
+% Double-framed box of text.
+\newcommand{\normalboxd}[1]{\fbox{\fbox{\vbox{#1}}}}
+
+% WITHDRAWN -- can't do in RTF, easily.
+% Framed box of text, horizontally centred. Ragged right within box.
+% \newcommand{\centeredbox}[2]{\begin{center}\fbox{\parbox{#1}{\raggedright#2}}\end{center}}
+% Double-framed box of text, horizontally centred. Ragged right within box.
+% \newcommand{\centeredboxd}[2]{\begin{center}\fbox{\fbox{\parbox{#1}{\raggedright#2}}}\end{center}}
+
+% toocomplex environment: simply prints the argument in LaTeX,
+% comes out verbatim in all generated formats.
+\newenvironment{toocomplex}{}{}
+
+% Colour: dummy commands since LaTeX doesn't support colour.
+% \definecolour{name}{red}{blue}{green}
+% \fcol{name}{text} ; Foreground
+% \bcol{name}{text} ; Background
+\newcommand{\definecolour}[4]{}
+\newcommand{\definecolor}[4]{}
+\newcommand{\fcol}[2]{#2}
+\newcommand{\bcol}[2]{#2}
+\newcommand{\sethotspotcolour}[1]{}
+\newcommand{\sethotspotunderline}[1]{}
+\newcommand{\settransparency}[1]{}
+\newcommand{\backslashraw}[0]{}
+\newcommand{\lbraceraw}[0]{}
+\newcommand{\rbraceraw}[0]{}
+\newcommand{\registered}[0]{(r)}
+\newcommand{\background}[1]{}
+\newcommand{\textcolour}[1]{}
+\newcommand{\overview}[2]{See \helpref{#1}{#2}.}
+\newcommand{\docparam}[2]{{\it #1}\begin{list}{}{\leftmargin=1cm}\item[]
+#2%
+\end{list}}
+\newcommand{\wxheading}[1]{{\bf #1}}
+\newcommand{\const}[0]{{\bf const}}
+\newcommand{\constfunc}[3]{{\bf #1} {\bf #2}(#3) {\bf const}\index{#2}}
+\newcommand{\windowstyle}[1]{{\bf #1}\index{#1}}
+
+\addtolength{\textwidth}{1in}
+\addtolength{\oddsidemargin}{-0.5in}
+\addtolength{\topmargin}{-0.5in}
+\addtolength{\textheight}{1in}
+\sloppy
+
projects / wxWidgets.git / commitdiff
