if ( !m_logicalFunctionSupported )
return;
- bool fill = m_brush.GetStyle() != wxTRANSPARENT;
-
wxGraphicsPath path = m_graphicContext->CreatePath();
m_graphicContext->PushState();
- m_graphicContext->Translate(x+w/2,y+h/2);
+ m_graphicContext->Translate(x+w/2.0,y+h/2.0);
wxDouble factor = ((wxDouble) w) / h;
m_graphicContext->Scale( factor , 1.0);
- if ( fill && (sa!=ea) )
- path.MoveToPoint(0,0);
+
// since these angles (ea,sa) are measured counter-clockwise, we invert them to
// get clockwise angles
- path.AddArc( 0, 0, h/2 , DegToRad(-sa) , DegToRad(-ea), sa > ea );
- if ( fill && (sa!=ea) )
- path.AddLineToPoint(0,0);
+ path.AddArc( 0, 0, h/2.0 , DegToRad(-sa) , DegToRad(-ea), sa > ea );
m_graphicContext->DrawPath( path );
m_graphicContext->PopState();
}
if (w == 0 || h == 0)
return;
+ if ( m_graphicContext->ShouldOffset() )
+ {
+ // if we are offsetting the entire rectangle is moved 0.5, so the
+ // border line gets off by 1
+ w -= 1;
+ h -= 1;
+ }
m_graphicContext->DrawRoundedRectangle( x,y,w,h,radius);
}
if ( !m_logicalFunctionSupported )
return;
+ if ( m_graphicContext->ShouldOffset() )
+ {
+ // if we are offsetting the entire rectangle is moved 0.5, so the
+ // border line gets off by 1
+ w -= 1;
+ h -= 1;
+ }
m_graphicContext->DrawEllipse(x,y,w,h);
}
#endif
#include "wx/graphics.h"
+#include "wx/rawbmp.h"
#if wxUSE_GRAPHICS_CONTEXT
void wxCairoPathData::AddPath( const wxGraphicsPathData* path )
{
- // TODO
+ cairo_path_t* p = (cairo_path_t*)path->GetNativePath();
+ cairo_append_path(m_pathContext, p);
+ UnGetNativePath(p);
}
void wxCairoPathData::CloseSubpath()
}
-void wxCairoContext::Clip( const wxRegion & WXUNUSED(region) )
+void wxCairoContext::Clip( const wxRegion& region )
{
-// TODO
+ // Create a path with all the rectangles in the region
+ wxGraphicsPath path = GetRenderer()->CreatePath();
+ wxRegionIterator ri(region);
+ while (ri)
+ {
+ path.AddRectangle(ri.GetX(), ri.GetY(), ri.GetW(), ri.GetH());
+ ri++;
+ }
+
+ // Put it in the context
+ cairo_path_t* cp = (cairo_path_t*) path.GetNativePath() ;
+ cairo_append_path(m_context, cp);
+
+ // clip to that path
+ cairo_clip(m_context);
+ path.UnGetNativePath(cp);
}
void wxCairoContext::Clip( wxDouble x, wxDouble y, wxDouble w, wxDouble h )
{
-// TODO
+ // Create a path with this rectangle
+ wxGraphicsPath path = GetRenderer()->CreatePath();
+ path.AddRectangle(x,y,w,h);
+
+ // Put it in the context
+ cairo_path_t* cp = (cairo_path_t*) path.GetNativePath() ;
+ cairo_append_path(m_context, cp);
+
+ // clip to that path
+ cairo_clip(m_context);
+ path.UnGetNativePath(cp);
}
void wxCairoContext::ResetClip()
{
-// TODO
+ cairo_reset_clip(m_context);
}
void wxCairoContext::DrawBitmap( const wxBitmap &bmp, wxDouble x, wxDouble y, wxDouble w, wxDouble h )
{
- /*
- Bitmap* image = Bitmap::FromHBITMAP((HBITMAP)bmp.GetHBITMAP(),(HPALETTE)bmp.GetPalette()->GetHPALETTE());
- m_context->DrawImage(image,(REAL) x,(REAL) y,(REAL) w,(REAL) h) ;
- delete image ;
- */
+ wxCHECK_RET( bmp.IsOk(), wxT("Invalid bitmap in wxCairoContext::DrawBitmap"));
+
+ cairo_surface_t* surface;
+ int bw = bmp.GetWidth();
+ int bh = bmp.GetHeight();
+ wxBitmap bmpSource = bmp; // we need a non-const instance
+ unsigned char* buffer = new unsigned char[bw*bh*4];
+ wxUint32* data = (wxUint32*)buffer;
+
+ // Create a surface object and copy the bitmap pixel data to it. if the
+ // image has alpha (or a mask represented as alpha) then we'll use a
+ // different format and iterator than if it doesn't...
+ if (bmpSource.HasAlpha() || bmpSource.GetMask())
+ {
+ surface = cairo_image_surface_create_for_data(
+ buffer, CAIRO_FORMAT_ARGB32, bw, bh, bw*4);
+ wxAlphaPixelData pixData(bmpSource, wxPoint(0,0), wxSize(bw, bh));
+ wxCHECK_RET( pixData, wxT("Failed to gain raw access to bitmap data."));
+
+ wxAlphaPixelData::Iterator p(pixData);
+ for (int y=0; y<bh; y++)
+ {
+ wxAlphaPixelData::Iterator rowStart = p;
+ for (int x=0; x<bw; x++)
+ {
+ // Each pixel in CAIRO_FORMAT_ARGB32 is a 32-bit quantity,
+ // with alpha in the upper 8 bits, then red, then green, then
+ // blue. The 32-bit quantities are stored native-endian.
+ // Pre-multiplied alpha is used.
+ unsigned char alpha = p.Alpha();
+ if (alpha == 0)
+ *data = 0;
+ else
+ *data = ( alpha << 24
+ | (p.Red() * alpha/255) << 16
+ | (p.Green() * alpha/255) << 8
+ | (p.Blue() * alpha/255) );
+ ++data;
+ ++p;
+ }
+ p = rowStart;
+ p.OffsetY(pixData, 1);
+ }
+ }
+ else // no alpha
+ {
+ surface = cairo_image_surface_create_for_data(
+ buffer, CAIRO_FORMAT_RGB24, bw, bh, bw*4);
+ wxNativePixelData pixData(bmpSource, wxPoint(0,0), wxSize(bw, bh));
+ wxCHECK_RET( pixData, wxT("Failed to gain raw access to bitmap data."));
+
+ wxNativePixelData::Iterator p(pixData);
+ for (int y=0; y<bh; y++)
+ {
+ wxNativePixelData::Iterator rowStart = p;
+ for (int x=0; x<bw; x++)
+ {
+ // Each pixel in CAIRO_FORMAT_RGB24 is a 32-bit quantity, with
+ // the upper 8 bits unused. Red, Green, and Blue are stored in
+ // the remaining 24 bits in that order. The 32-bit quantities
+ // are stored native-endian.
+ *data = ( p.Red() << 16 | p.Green() << 8 | p.Blue() );
+ ++data;
+ ++p;
+ }
+ p = rowStart;
+ p.OffsetY(pixData, 1);
+ }
+ }
+
+
+ PushState();
+
+ // In case we're scaling the image by using a width and height different
+ // than the bitmap's size create a pattern transformation on the surface and
+ // draw the transformed pattern.
+ cairo_pattern_t* pattern = cairo_pattern_create_for_surface(surface);
+ wxDouble scaleX = w / bw;
+ wxDouble scaleY = h / bh;
+ cairo_scale(m_context, scaleX, scaleY);
+
+ // prepare to draw the image
+ cairo_translate(m_context, x, y);
+ cairo_set_source(m_context, pattern);
+ // use the original size here since the context is scaled already...
+ cairo_rectangle(m_context, 0, 0, bw, bh);
+ // fill the rectangle using the pattern
+ cairo_fill(m_context);
+
+ // clean up
+ cairo_pattern_destroy(pattern);
+ cairo_surface_destroy(surface);
+ delete [] buffer;
+ PopState();
}
void wxCairoContext::DrawIcon( const wxIcon &icon, wxDouble x, wxDouble y, wxDouble w, wxDouble h )
{
- /*
- Bitmap* image = Bitmap::FromHICON((HICON)icon.GetHICON());
- m_context->DrawImage(image,(REAL) x,(REAL) y,(REAL) w,(REAL) h) ;
- delete image ;
- */
+ // An icon is a bitmap on wxGTK, so do this the easy way. When we want to
+ // start using the Cairo backend on other platforms then we may need to
+ // fiddle with this...
+ DrawBitmap(icon, x, y, w, h);
}
void wxCairoContext::DrawText( const wxString &str, wxDouble x, wxDouble y )
{
- if ( m_font.IsNull() || str.IsEmpty())
- return ;
- cairo_move_to(m_context,x,y);
- const wxWX2MBbuf buf(str.mb_str(wxConvUTF8));
+ if ( m_font.IsNull() || str.empty())
+ return;
+
((wxCairoFontData*)m_font.GetRefData())->Apply(this);
+
+ // Cairo's x,y for drawing text is at the baseline, so we need to adjust
+ // the position we move to by the ascent.
+ cairo_font_extents_t fe;
+ cairo_font_extents(m_context, &fe);
+ cairo_move_to(m_context, x, y+fe.ascent);
+
+ const wxWX2MBbuf buf(str.mb_str(wxConvUTF8));
cairo_show_text(m_context,buf);
}
void wxCairoContext::GetTextExtent( const wxString &str, wxDouble *width, wxDouble *height,
wxDouble *descent, wxDouble *externalLeading ) const
{
- // TODO
+ if ( m_font.IsNull() || str.empty())
+ return;
+
+ ((wxCairoFontData*)m_font.GetRefData())->Apply((wxCairoContext*)this);
+
+ if (width)
+ {
+ const wxWX2MBbuf buf(str.mb_str(wxConvUTF8));
+ cairo_text_extents_t te;
+ cairo_text_extents(m_context, buf, &te);
+ *width = te.width;
+ }
+
+ if (height || descent || externalLeading)
+ {
+ cairo_font_extents_t fe;
+ cairo_font_extents(m_context, &fe);
+
+ if (height)
+ *height = fe.height;
+ if ( descent )
+ *descent = fe.descent;
+ if ( externalLeading )
+ *externalLeading = wxMax(0, fe.height - (fe.ascent + fe.descent));
+ }
}
void wxCairoContext::GetPartialTextExtents(const wxString& text, wxArrayDouble& widths) const
projects / wxWidgets.git / commitdiff
