makefiles:: recreate
Makefiles:: recreate
recreate::
- @src/gtk/setup/general/createall
+ @install/unix/setup/general/createall
# the following ones define what needs to be done to distribute the
# library and its components
# define __WXGTK__
# elif defined(__MOTIF__)
# define __WXMOTIF__
+# elif defined(__QT__)
+# define __WXQT__
# else
# error No __WXxxx__ define set! Please define __WXGTK__,__WXMSW__ or __WXMOTIF__.
# endif
#if defined(__WXMSW__)
#include "wx/msw/setup.h"
-#elif defined(__WXMOTIF__)
-#include "wx/xt/setup.h"
-#elif defined(__WXGTK__)
-#include "wx/gtk/setup.h"
+#else
+#include "wx/../../install/unix/setup/setup.h"
#endif
#endif
--- /dev/null
+* General
+----------
+
+The Unix variants of wxWindows use GNU configure. If you have problems
+with your make use GNU make instead.
+
+* GUI libraries
+-----------------------
+
+wxWindows requires a GUI toolkit to be installed. Does that make
+sense? So far only the GTK is supported, but we hope to provide
+the choice between GTK, Qt, Motif/Lesstif in the not so distant
+future.
+
+You can get the newest version of the GTK from the GTK homepage
+at
+ http://www.gtk.org
+
+The newest versin of Qt can be downloaded for free from the Trolltec's
+site at
+ http://www.troll.no
+
+Lesstif can be downloaded from their site
+at
+ http://www.lesstif.org
+
+If you want to develop using Motif, you need to buy it, unless it comes
+with your operating system such as all commercial Unices, as well as
+RedHat's, SuSe's and probably other's Linux Motif editions.
+
+* Additional libraries
+-----------------------
+
+There will be a few more features of wxWindows, which will
+require further libraries (on some platforms). These
+features will be optional. I hope to teach configure
+to check that out automatically.
+
+Thread support:
+
+ Requires pthreads under Linux with glibc 2. pthreads are
+ always present on such systems, so just compile, unless
+ you have RedHat 5.0, which has a broken combination of
+ glibc 2 and X. In this case, you have to run configure
+ with "--without-threads".
+
+ Requires PCthreads under Linux with libc 5. If you
+ haven't installed pcthreads, there will be no thread
+ support in wxWindows, but the library will compile.
+
+ Requires Posix threads on commercial Unix system,
+ which are always present. Just compile.
+
+ Requires SGI threads on IRIX, which are always present.
+ Just compile.
+
+Python scripting language support:
+
+ Requires Python. Soon to come.
+
+* Other things to do
+-----------------------------
+
+wxGTK and wxMotif/wxLesstif require the built-in
+ImLib/GdkImlib to be configured. For that purpose
+copy the two files from /misc/imlib to your
+home directory. You may also edit imrc by hand as
+you like. The palette file is required when using
+wxWindows in 256-colour mode.
+
+If you want to use wxWindows's ODBC support, you'll have
+to create a .odbc.ini file. The readme file in
+~/src/iodbc tells you what to do.
+
+
+* Create your configuration
+-----------------------------
+
+This must be done in /install/unix
+
+Usage:
+ ./configure options
+
+If you want to use system's C and C++ compiler,
+set environment variables CC and CCC as
+
+ % setenv CC cc
+ % setenv CCC CC
+ % ./configure options
+
+to see all the options please use:
+
+ ./configure --help
+
+The basic philosophy is that if you want to use different
+configurations, like a debug and a release version,
+or use the same source tree on different systems,
+you have only to change the environment variable OSTYPE.
+(Sadly this variable is not set by default on some systems
+in some shells - on SGI's for example). So you will have to
+set it there. This variable HAS to be set before starting
+configure, so that it knows which system it tries to
+configure for.
+
+Configure will complain if the system variable OSTYPE has
+not been defined. And Make in some circumstances as well...
+
+* General options
+-------------------
+
+Obviously, you have to choose a toolkit. You must do this by
+running configure with either of
+
+ --with-gtk Use the GIMP ToolKit (GTK)
+
+ --with-qt Use Qt from TrollTec
+
+ --with-motif Use either Motif or Lesstif
+ Configure will look for both.
+
+The following options handle the kind of library you want to build.
+
+ --with-shared Create shared libraries.
+
+ --without-optimise Do not optimise the code.
+
+ --with-profile Add profiling info to the
+ object files. Currently
+ broken.
+
+ --with-mem_tracing Add built-in memory tracing.
+
+ --with-debug_info Add debug info to object
+ files.
+
+ --with-debug_flag Define __DEBUG__ and __WXDEBUG__ when
+ compiling.
+
+* Feature Options
+-------------------
+
+When using the Windows version of wxWindows, it is possible
+to edit the file /include/wx/msw/setup.h in order to enable
+or disable some features of wxWindows so that the resulting
+binaries get smaller.
+
+As I don't yet care for binary size and target mainly at
+producing a shared library, wxWindows's configure system auto-
+matically enables all features, as long as they are already
+implemented.
+
+* Compiling
+-------------
+
+The following must be done in the base directory (e.g. ~/wxGTK
+or ~/wxWin)
+
+First you have to create all makefiles in all subdirectories:
+
+ make Makefiles
+
+Dependencies are generated automatically using
+
+ make depend
+
+for some reason, this doesn't seem to work.
+
+Now the makefiles are created you can compile everything is as simple
+as typing:
+
+ make
+
+make yourself some coffee, as it will try to compile
+ALL the files in this distribution.
+
+if you want to be more selective:
+
+ make src will build only the base libraries
+ make utils will build the utils
+ make samples will build the samples
+ make other will build the other samples
+ make user will build the files in the directory other
+
+Depending on the configuration of some files, the libraries
+and binaries will be placed in different directories.
+The "global" binaries and libraries will be placed in:
+
+ bin/$(OSTYPE) and
+ lib/$(OSTYPE) respectively
+
+"local" binaries and libraries will be placed in:
+
+ (basedir of that application)/$(OSTYPE).
+
+This is also the place where all the object-files will go.
+
+If you want to conserve disk space by removing unnecessary
+object-files:
+
+ make clean_obj
+
+will do the work for you.
+
+* Creating a new Project
+--------------------------
+
+I propose to put all contributed programs in the directory
+"~/wxWin/user", with a directory of its own.
+
+This directory then should include the following files:
+
+Makefile (You can copy this one from any application in samples
+ probably you will not need to edit this one. There is
+ only one case where you might be interested in changing
+ this file, but about that see later.)
+Makefile.in (This is the base application-Makefile template, from
+ which the actual Makefile for each system is created.
+ More about this later)
+
+put ALL your source code along with all the other stuff you need for
+your application in this directory (subdirectories are welcome).
+
+** Something about Makefiles
+------------------------------
+
+On general principle it should only contain ONE line, which is as follows:
+
+ include ../../src/unix/setup/general/makeapp
+
+this will include all the necessary definitions for creating the applications
+
+the only case where you might want to add another line is the following:
+this version of configure also supports creation of source archives of the
+application for easy distribution and updates to newer version of wxWindows.
+ For this purpose all files in the application-directory will be put into
+a gziped tar-file in the full notation user/<your application>/*
+if you want to include some other files that you want "more visible", like
+a README.<yourApp> or a shell script for easy
+compilation/installation/distribution, then you have to add a variable
+
+ DISTRIBUTE_ADDITIONAL=<your files>
+
+to the Makefile.
+So it would look like this:
+
+ DISTRIBUTE_ADDITIONAL=README.TheApp
+ include ../../src/unix/setup/general/makeapp
+
+As we have already talked about distribution the command to create a
+distribution is:
+
+ make distrib
+
+NOTE: If you are in the base directory of wxWindows it will create
+distribution packages for wxWindows as well as for all packages in the
+user directory.
+ So if you want to create only packages for the files in user,
+then go to the directory other and type:
+
+ make distrib
+
+or if you only want one application to be created then
+enter the specific directory and type there:
+make distrib
+
+All the distribution files will be put in the directory
+distrib at the base of the wxWindows-tree (where also configure
+and template.mak can be found).
+
+** Something about Makefile.in
+--------------------------------
+
+As you have already seen with Makefile, configure makes a lot of use
+if the include statement in make to keep the Makefiles as simple as
+possible.
+
+So basically there are only variables to define and then a include command.
+Exception to this rule is if you have special rules for some stuff...
+These rules should go AFTER the include statement!!!
+
+so the general header looks like this:
+
+ # wxWindows base directory
+ WXBASEDIR=@WXBASEDIR@
+ # set the OS type for compilation
+ OS=@OS@
+ # compile a library only
+ RULE=bin
+
+and the general footer will look like this:
+
+ # include the definitions now
+ include ../../../template.mak
+
+the key variable is RULE, which defines what make should create
+in this directory.
+
+here are some examples:
+
+ RULE description
+ ===========================================================================
+ bin creates a local binary (for a global binary prefix bin with g)
+ additional variables needed:
+ BIN_TARGET this gives the name of your application
+ BIN_OBJ this gives the object files needed to
+ link the application
+ optional variables are:
+ BIN_SRC this gives the list of c/c++ files for
+ which dependencies will be checked.
+ (This can be achieved with: make depend)
+ BIN_LINK this gives commands for additional
+ libraries needed to link the application
+ ---------------------------------------------------------------------------
+ bin2 creates two local binaries (for global binaries prefix bin2 with g)
+ in addition to the variables specified above you MUST also
+ provide the same variables with BIN2_ instead of BIN_
+ ---------------------------------------------------------------------------
+ lib creates a local library (for a global binary prefix bin with g)
+ additional variables needed:
+ LIB_TARGET this gives the name of your library
+ LIB_OBJ this gives the object files needed for
+ the library to be build.
+ optional variables are:
+ LIB_SRC this gives the list of c/c++ files for
+ which dependencies will be checked.
+ libbin and libgbin are also possible and will need in addition
+ the variables from bin
+ ---------------------------------------------------------------------------
+ gslib is similar to lib, but it creates a shared library if the system
+ supports it.
+ additional variables needed:
+ LIB_MAJOR major number of the shared library
+ LIB_MINOR minor number of the shared library
+ ---------------------------------------------------------------------------
+ other additional variables:
+
+ ADD_COMPILE define additional includes/defines that
+ are needed to compile the object files
+ (if you need to reference some directory
+ utils - like wxGrid -, then please
+ reference them with the variables defined
+ in template.mak - e.g.: $(SRCDIR),$(UTILS),
+ $(SAMPLES),$(OTHERS))
+
+ NEEDED_DEFINES lists all the defines that HAVE to be set in
+ /include/wx/setup.h to compile correctly.
+
+ SRC_DIR lists all directories that are needed to
+ compile. (i.e: lists all the directories,
+ where there are source-files.) But it is
+ also needed to clean an object and for
+ machines, for which make does not support
+ VPATH
+
+currently there are the following compiling rules provided:
+object files are created for the following file extensions:
+.c .cc .cpp
+
+Please have a closer look at the Makefiles in this distribution.
+
+* Platforms configure is working with
+---------------------------------------
+
+Please report build succes on any machine. Especially non-
+Linux operating systems (which I don't have).
+
+Original author of the autoconf system for wxxt-1.66 and for this INSTALL
+file:
+
+ Martin Sperl sperl@dsn.ast.univie.ac.at
+
+Ported to wxGTK 0.1:
+
+ Wolfram Gloger wmglo@dent.med.uni-muenchen.de
+
+Thanks alot to both of them.
+
+In the hope that it will be useful,
+
+ Robert Roebling roebling@sun2.ruf.uni-freiburg.de
+
+
--- /dev/null
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 93, 94, 95, 1996 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# The master version of this file is at the FSF in /home/gd/gnu/lib.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit system type (host/target name).
+#
+# Only a few systems have been added to this list; please add others
+# (but try to keep the structure clean).
+#
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 8/24/94.)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ alpha:OSF1:[VX]*:*)
+ # After 1.2, OSF1 uses "V1.3" for uname -r.
+ # After 4.x, OSF1 uses "X4.x" for uname -r.
+ echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VX]//'`
+ exit 0 ;;
+ alpha:OSF1:*:*)
+ # 1.2 uses "1.2" for uname -r.
+ echo alpha-dec-osf${UNAME_RELEASE}
+ exit 0 ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit 0 ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-cbm-sysv4
+ exit 0;;
+ amiga:NetBSD:*:*)
+ echo m68k-cbm-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit 0;;
+ Pyramid*:OSx*:*:*)
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit 0 ;;
+ sun4*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ i86pc:SunOS:5.*:*)
+ echo i386-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit 0 ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:NetBSD:*:*)
+ echo m68k-atari-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sun3*:NetBSD:*:*)
+ echo m68k-sun-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:NetBSD:*:*)
+ echo m68k-apple-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ mips:*:4*:UMIPS)
+ echo mips-mips-riscos4sysv
+ exit 0 ;;
+ mips:*:5*:RISCos)
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit 0 ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit 0 ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit 0 ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit 0 ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88100 ] ; then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
+ -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit 0 ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit 0 ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit 0 ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit 0 ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i[34]86:AIX:*:*)
+ echo i386-ibm-aix
+ exit 0 ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ sed 's/^ //' << EOF >dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
+ echo rs6000-ibm-aix3.2.5
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit 0 ;;
+ *:AIX:*:4)
+ if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=4.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit 0 ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit 0 ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit 0 ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit 0 ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit 0 ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit 0 ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit 0 ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit 0 ;;
+ 9000/[3478]??:HP-UX:*:*)
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/7?? | 9000/8?[679] ) HP_ARCH=hppa1.1 ;;
+ 9000/8?? ) HP_ARCH=hppa1.0 ;;
+ esac
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit 0 ;;
+ 3050*:HI-UX:*:*)
+ sed 's/^ //' << EOF >dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
+ echo unknown-hitachi-hiuxwe2
+ exit 0 ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit 0 ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit 0 ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit 0 ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit 0 ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit 0 ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ CRAY*X-MP:*:*:*)
+ echo xmp-cray-unicos
+ exit 0 ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE}
+ exit 0 ;;
+ CRAY*C90:*:*:*)
+ echo c90-cray-unicos${UNAME_RELEASE}
+ exit 0 ;;
+ CRAY-2:*:*:*)
+ echo cray2-cray-unicos
+ exit 0 ;;
+ hp3[0-9][05]:NetBSD:*:*)
+ echo m68k-hp-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ i[34]86:BSD/386:*:* | *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ *:FreeBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit 0 ;;
+ *:NetBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ exit 0 ;;
+ i*:CYGWIN*:*)
+ echo i386-unknown-cygwin32
+ exit 0 ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin32
+ exit 0 ;;
+ *:GNU:*:*)
+ echo `echo ${UNAME_MACHINE}|sed -e 's,/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit 0 ;;
+ *:Linux:*:*)
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us.
+ ld_help_string=`ld --help 2>&1`
+ if echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf_i[345]86"; then
+ echo "${UNAME_MACHINE}-unknown-linux" ; exit 0
+ elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i[345]86linux"; then
+ echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0
+ elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i[345]86coff"; then
+ echo "${UNAME_MACHINE}-unknown-linuxcoff" ; exit 0
+ elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68kelf"; then
+ echo "${UNAME_MACHINE}-unknown-linux" ; exit 0
+ elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68klinux"; then
+ echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0
+ elif test "${UNAME_MACHINE}" = "alpha" ; then
+ echo alpha-unknown-linux ; exit 0
+ else
+ # Either a pre-BFD a.out linker (linuxoldld) or one that does not give us
+ # useful --help. Gcc wants to distinguish between linuxoldld and linuxaout.
+ test ! -d /usr/lib/ldscripts/. \
+ && echo "${UNAME_MACHINE}-unknown-linuxoldld" && exit 0
+ # Determine whether the default compiler is a.out or elf
+ cat >dummy.c <<EOF
+main(argc, argv)
+int argc;
+char *argv[];
+{
+#ifdef __ELF__
+ printf ("%s-unknown-linux\n", argv[1]);
+#else
+ printf ("%s-unknown-linuxaout\n", argv[1]);
+#endif
+ return 0;
+}
+EOF
+ ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
+ fi ;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+ i[34]86:DYNIX/ptx:4*:*)
+ echo i386-sequent-sysv4
+ exit 0 ;;
+ i[34]86:*:4.*:* | i[34]86:SYSTEM_V:4.*:*)
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
+ else
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ i[34]86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-unknown-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ echo ${UNAME_MACHINE}-unknown-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-unknown-sysv32
+ fi
+ exit 0 ;;
+ Intel:Mach:3*:*)
+ echo i386-unknown-mach3
+ exit 0 ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit 0 ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit 0 ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit 0 ;;
+ M680[234]0:*:R3V[567]*:*)
+ test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+ 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0)
+ uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4.3 && exit 0 ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4 && exit 0 ;;
+ m680[234]0:LynxOS:2.[23]*:*)
+ echo m68k-lynx-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit 0 ;;
+ i[34]86:LynxOS:2.[23]*:*)
+ echo i386-lynx-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ TSUNAMI:LynxOS:2.[23]*:*)
+ echo sparc-lynx-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ rs6000:LynxOS:2.[23]*:*)
+ echo rs6000-lynx-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit 0 ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit 0 ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit 0 ;;
+ R3000:*System_V*:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+cat >dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ printf ("%s-next-nextstep%s\n", __ARCHITECTURE__, version==2 ? "2" : "3");
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-unknown-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+ printf ("vax-dec-bsd\n"); exit (0);
+#else
+ printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
+rm -f dummy.c dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ c34*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ c38*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ c4*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ esac
+fi
+
+#echo '(Unable to guess system type)' 1>&2
+
+exit 1
--- /dev/null
+#! /bin/sh
+# Configuration validation subroutine script, version 1.1.
+# Copyright (C) 1991, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+if [ x$1 = x ]
+then
+ echo Configuration name missing. 1>&2
+ echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
+ echo "or $0 ALIAS" 1>&2
+ echo where ALIAS is a recognized configuration type. 1>&2
+ exit 1
+fi
+
+# First pass through any local machine types.
+case $1 in
+ *local*)
+ echo $1
+ exit 0
+ ;;
+ *)
+ ;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ linux-gnu*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple)
+ os=
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco5)
+ os=sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ tahoe | i860 | m68k | m68000 | m88k | ns32k | arm \
+ | arme[lb] | pyramid \
+ | tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \
+ | alpha | we32k | ns16k | clipper | i370 | sh \
+ | powerpc | powerpcle | 1750a | dsp16xx | mips64 | mipsel \
+ | pdp11 | mips64el | mips64orion | mips64orionel \
+ | sparc | sparclet | sparclite | sparc64)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i[3456]86)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ vax-* | tahoe-* | i[3456]86-* | i860-* | m68k-* | m68000-* | m88k-* \
+ | sparc-* | ns32k-* | fx80-* | arm-* | c[123]* \
+ | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* | power-* \
+ | none-* | 580-* | cray2-* | h8300-* | i960-* | xmp-* | ymp-* \
+ | hppa-* | hppa1.0-* | hppa1.1-* | alpha-* | we32k-* | cydra-* | ns16k-* \
+ | pn-* | np1-* | xps100-* | clipper-* | orion-* | sparclite-* \
+ | pdp11-* | sh-* | powerpc-* | powerpcle-* | sparc64-* | mips64-* | mipsel-* \
+ | mips64el-* | mips64orion-* | mips64orionel-* | f301-*)
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-cbm
+ ;;
+ amigados)
+ basic_machine=m68k-cbm
+ os=-amigados
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-cbm
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ cray2)
+ basic_machine=cray2-cray
+ os=-unicos
+ ;;
+ [ctj]90-cray)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i[3456]86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i[3456]86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i[3456]86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i[3456]86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pentium | p5)
+ basic_machine=i586-intel
+ ;;
+ pentiumpro | p6)
+ basic_machine=i686-intel
+ ;;
+ pentium-* | p5-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ k5)
+ # We don't have specific support for AMD's K5 yet, so just call it a Pentium
+ basic_machine=i586-amd
+ ;;
+ nexen)
+ # We don't have specific support for Nexgen yet, so just call it a Pentium
+ basic_machine=i586-nexgen
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=rs6000-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ xmp)
+ basic_machine=xmp-cray
+ os=-unicos
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ mips)
+ basic_machine=mips-mips
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sparc)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -unixware* | svr4*)
+ os=-sysv4
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+ | -amigados* | -msdos* | -newsos* | -unicos* | -aof* | -aos* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -linux-gnu* | -uxpv*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigados
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f301-fujitsu)
+ os=-uxpv
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -aix*)
+ vendor=ibm
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -vxsim* | -vxworks*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
--- /dev/null
+dnl ////////////////////////////////////////////////////////////////////////
+dnl
+dnl Top-level configure.in for wxWindows by Robert Roebling, Wolfram Gloger
+dnl and Martin Sperl.
+dnl
+dnl This script is under the wxWindows licence.
+dnl
+dnl ////////////////////////////////////////////////////////////////////////
+
+dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
+dnl
+AC_DEFUN(AM_PATH_GTK,
+[dnl
+dnl Get the cflags and libraries from the gtk-config script
+dnl
+AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)],
+ gtk_config_prefix="$withval", gtk_config_prefix="")
+AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
+ gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
+
+ if test x$gtk_config_exec_prefix != x ; then
+ gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
+ fi
+ fi
+ if test x$gtk_config_prefix != x ; then
+ gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
+ if test x${GTK_CONFIG+set} != xset ; then
+ GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
+ fi
+ fi
+
+ AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
+ min_gtk_version=ifelse([$1], ,0.99.7,$1)
+ AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
+ no_gtk=""
+ if test "$GTK_CONFIG" != "no" ; then
+ GTK_CFLAGS=`$GTK_CONFIG --cflags`
+ GTK_LIBS=`$GTK_CONFIG --libs`
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$LIBS $GTK_LIBS"
+dnl
+dnl Now check if the installed GTK is sufficiently new. (Also sanity
+dnl checks the results of gtk-config to some extent
+dnl
+ AC_TRY_RUN([
+#include <gtk/gtk.h>
+#include <stdio.h>
+
+int
+main ()
+{
+ int major, minor, micro;
+
+ if (sscanf("$min_gtk_version", "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_gtk_version");
+ exit(1);
+ }
+
+ return !((gtk_major_version > major) ||
+ ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
+ ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)));
+}
+],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ else
+ no_gtk=yes
+ fi
+ if test "x$no_gtk" = x ; then
+ AC_MSG_RESULT(yes)
+ ifelse([$2], , :, [$2])
+ else
+ AC_MSG_RESULT(no)
+ GTK_CFLAGS=""
+ GTK_LIBS=""
+ ifelse([$3], , :, [$3])
+ fi
+ AC_SUBST(GTK_CFLAGS)
+ AC_SUBST(GTK_LIBS)
+])
+
+dnl ------------------------------------------------------------------------
+dnl custom macros
+dnl ------------------------------------------------------------------------
+
+AC_DEFUN(AC_OVERRIDES_PREPARE,
+[
+rm -f ${OSTYPE}.system.cache.tmp
+touch ${OSTYPE}.system.cache.tmp
+touch ${OSTYPE}.system.cache
+])
+
+AC_DEFUN(AC_OVERRIDES_DONE,
+[
+mv ${OSTYPE}.system.cache.tmp ${OSTYPE}.system.cache
+])
+
+dnl package,message,helpmessage,variable
+AC_DEFUN(AC_OVERRIDES,
+[
+AC_MSG_CHECKING("for $2")
+AC_ARG_WITH($1,$3,
+[if test "x$with_$1" = xyes; then
+ ac_cv_use_$1='$4="1"'
+else
+ ac_cv_use_$1='$4="0"'
+fi],
+[
+ LINE=`grep "$4" ${OSTYPE}.system.cache`
+ if test "x$LINE" != x ; then
+ eval "DEFAULT_$LINE"
+ fi
+ ac_cv_use_$1='$4='$DEFAULT_$4
+])
+eval "$ac_cv_use_$1"
+echo $ac_cv_use_$1 >> ${OSTYPE}.system.cache.tmp
+if test "$$4" = 1; then
+ AC_MSG_RESULT(yes)
+else
+ AC_MSG_RESULT(no)
+fi
+])
+
+dnl package,message,helpmessage,variable
+AC_DEFUN(AC_OVERRIDES_OLD,
+[
+AC_MSG_CHECKING("for $2")
+AC_CACHE_VAL(ac_cv_use_$1,
+[
+AC_ARG_WITH($1,$3,
+[if test "x$with_$1" = xyes; then
+ ac_cv_use_$1='$4="1"'
+else
+ ac_cv_use_$1='$4="0"'
+fi],[ac_cv_use_$1='$4=$DEFAULT_$4'])
+])
+eval "$ac_cv_use_$1"
+
+if test "$$4" = 1; then
+ AC_MSG_RESULT(yes)
+else
+ AC_MSG_RESULT(no)
+fi
+])
+
+AC_DEFUN(AC_PATH_FIND_INCLUDES,
+[
+ac_find_includes=
+for ac_dir in $1;
+ do
+ if test -f "$ac_dir/$2"; then
+ ac_find_includes=$ac_dir
+ break
+ fi
+ done
+])
+
+AC_DEFUN(AC_PATH_FIND_LIBRARIES,
+[
+ac_find_libraries=
+for ac_dir in $1;
+ do
+ for ac_extension in a so sl; do
+ if test -f "$ac_dir/lib$2.$ac_extension"; then
+ ac_find_libraries=$ac_dir
+ break 2
+ fi
+ done
+ done
+])
+
+dnl Path to include, allready defined
+AC_DEFUN(AC_INCLUDE_PATH_EXIST,
+[
+ ac_path_to_include=$1
+ echo "$2" | grep "\-I$1" > /dev/null
+ result=$?
+ if test $result = 0; then
+ ac_path_to_include=""
+ else
+ ac_path_to_include="-I$1"
+ fi
+])
+
+dnl Path to link, allready defined
+AC_DEFUN(AC_LINK_PATH_EXIST,
+[
+ echo "$2" | grep "\-L$1" > /dev/null
+ result=$?
+ if test $result = 0; then
+ ac_path_to_link=""
+ else
+ ac_path_to_link="-L$1"
+ fi
+])
+
+dnl ------------------------------------------------------------------------
+dnl Process this file with autoconf to produce a configure script.
+dnl ------------------------------------------------------------------------
+
+AC_INIT(configure.in)
+
+dnl ------------------------------------------------------------------------
+dnl Check platform
+dnl ------------------------------------------------------------------------
+
+OS="${OSTYPE}"
+
+if test "x$OS" = "x"; then
+ UNAME=`uname`
+ AC_MSG_ERROR("The system variable OS has not been set"
+ "please set is everytime befor compiling on this system"
+ "A good example for this system would be:"
+ "setenv OSTYPE $UNAME for csh as a SHELL"
+ "EXPORT OSTYPE=$UNAME for sh as SHELL"
+ "please set this and restart again."
+ )
+fi
+
+dnl ------------------------------------------------------------------------
+dnl Set base directory
+dnl ------------------------------------------------------------------------
+
+cd ../..
+WXBASEDIR=`pwd`
+cd install/unix
+AC_SUBST(WXBASEDIR)
+
+dnl ------------------------------------------------------------------------
+dnl search path for includes and libraries
+dnl ------------------------------------------------------------------------
+
+SEARCH_INCLUDE="\
+ /usr/Motif1.2/include \
+ \
+ /usr/X11R6/include \
+ /usr/X11R5/include \
+ /usr/X11R4/include \
+ \
+ /usr/include/X11R6 \
+ /usr/include/X11R5 \
+ /usr/include/X11R4 \
+ \
+ /usr/local/X11R6/include \
+ /usr/local/X11R5/include \
+ /usr/local/X11R4/include \
+ \
+ /usr/local/include/X11R6 \
+ /usr/local/include/X11R5 \
+ /usr/local/include/X11R4 \
+ \
+ /usr/X11/include \
+ /usr/include/X11 \
+ /usr/local/X11/include \
+ /usr/local/include/X11 \
+ \
+ /usr/X386/include \
+ /usr/x386/include \
+ /usr/XFree86/include/X11 \
+ \
+ /usr/include \
+ /usr/local/include \
+ /usr/local/include/gtk \
+ /usr/unsupported/include \
+ /usr/athena/include \
+ /usr/local/x11r5/include \
+ /usr/lpp/Xamples/include \
+ \
+ /usr/openwin/include \
+ /usr/openwin/share/include \
+ "
+
+SEARCH_LIB="`echo "$SEARCH_INCLUDE" | sed s/include/lib/g` \
+ "
+
+dnl ------------------------------------------------------------------------
+dnl standard checks
+dnl ------------------------------------------------------------------------
+
+dnl ###################
+dnl # checks programs #
+dnl ###################
+
+dnl C-compiler checks
+dnl =================
+dnl use what compiler
+AC_PROG_CC
+dnl defines CC with the compiler to use
+dnl defines GCC with yes if using gcc
+dnl defines GCC empty if not using gcc
+dnl defines CFLAGS
+
+CFLAGS=`echo "$CFLAGS" | sed 's/-g//g'`
+
+dnl does compiler support -c and -o simultaniously
+AC_PROG_CC_C_O
+dnl defines NO_MINUS_C_MINUS_O if compiler does not accept
+dnl both switches simultaniously
+dnl what is the c-preprocessor
+AC_PROG_CPP
+dnl defines CPP with the c-preprocessor
+dnl is -traditional needed for correct compilations
+AC_PROG_GCC_TRADITIONAL
+dnl adds -traditional for gcc if needed
+
+AC_LANG_SAVE
+
+dnl C++-compiler checks
+dnl ===================
+dnl use what compiler
+AC_PROG_CXX
+dnl defines CXX with the compiler to use
+dnl defines GXX with yes if using gxx
+dnl defines GXX empty if not using gxx
+dnl defines CXXFLAGS
+dnl what is the C++-preprocessor
+AC_PROG_CXXCPP
+dnl defines CXXCPP with the C++-preprocessor
+
+CXXFLAGS=`echo "$CXXFLAGS" | sed 's/-g//g'`
+
+AC_LANG_RESTORE
+
+dnl ranlib command
+dnl ==============
+AC_PROG_RANLIB
+dnl defines RANLIB with the appropriate command
+
+dnl ar command
+dnl ==========
+AC_CHECK_PROG(AR, ar, ar, ar)
+dnl defines AR with the appropriate command
+
+dnl install checks
+dnl ==============
+AC_PROG_INSTALL
+dnl defines INSTALL with the appropriate command
+
+dnl does ln -s works
+dnl ================
+AC_PROG_LN_S
+dnl defines LN_S with the appropriate command
+
+dnl awk command
+dnl ===========
+AC_PROG_AWK
+dnl defines AWK with the appropriate command
+
+dnl ###############
+dnl # make checks #
+dnl ###############
+dnl check if VPATH works
+AC_MSG_CHECKING("make for VPATH support")
+dnl create Makefile
+cat - << EOF > confMake
+check : file
+ cp \$? \$@
+ cp \$? final_file
+EOF
+
+if test ! -d sub ; then
+ mkdir sub
+fi
+echo dummy > sub/file
+${MAKE-make} -f confMake VPATH=sub 2> config.log > /dev/null
+RESULT=$?
+rm -f sub/file check final_file config.log confMake
+rmdir sub
+if test "$RESULT" = 0; then
+ AC_MSG_RESULT(yes)
+else
+ AC_MSG_RESULT(no)
+ AC_MSG_ERROR(
+You need a make-utility that is able to use the variable
+VPATH correctly.
+If your version of make does not support VPATH correctly,
+please install GNU-make (possibly as gmake), and start
+configure with the following command:
+export MAKE=gmake; ./configure for sh-type shells
+setenv MAKE gmake; ./configure for csh-type shells
+Also please do remember to use gmake in this case every time
+you are trying to compile.
+)
+fi
+
+dnl ####################
+dnl # checks libraries #
+dnl ####################
+
+dnl find the X11 include and library files
+AC_PATH_XTRA
+dnl defines x_includes and x_libraries
+
+dnl #######################
+dnl # checks header files #
+dnl #######################
+AC_HEADER_DIRENT
+dnl defines DIR
+dnl defines MACRO HAVE_DIRENT_H if dirent.h exists
+dnl defines MACRO HAVE_SYS_NDIR_H if sys/ndir.h exists
+dnl defines MACRO HAVE_SYS_DIR_H if sys/dir.h exists
+dnl defines MACRO HAVE_NDIR_H if ndir.h exists
+AC_HEADER_STDC
+dnl defines STDC_HEADERS if ANSI-C header
+AC_HEADER_SYS_WAIT
+dnl defines HAVE_SYS_WAIT_H if sys/wait.h exist and is POSIX.1
+AC_CHECK_HEADER(fcntl.h)
+dnl defines HAVE_FCNTL_H
+AC_CHECK_HEADER(limits.h)
+dnl defines HAVE_LIMITS_h
+AC_CHECK_HEADER(sys/file.h)
+dnl defines HAVE_SYS_FILE_H
+AC_CHECK_HEADER(sys/time.h)
+dnl defines HAVE_SYS_TIME_H
+AC_CHECK_HEADER(unistd.h)
+dnl defines HAVE_UNISTD_H
+dnl As it needs Linux 2.1.x for the moment: check whether the file exists (GL).
+AC_CHECK_HEADER(linux/joystick.h)
+GTK_JOYSTICK=""
+if test "$ac_cv_header_linux_joystick_h" = "yes"; then
+ GTK_JOYSTICK="gtk/joystick.cpp"
+fi
+AC_SUBST(GTK_JOYSTICK)
+
+dnl ###################
+dnl # checks typedefs #
+dnl ###################
+AC_TYPE_GETGROUPS
+dnl defines GETGROUPS_T
+AC_TYPE_MODE_T
+dnl defines mode_t if not already defined
+AC_TYPE_OFF_T
+dnl defines off_t if not already defined
+AC_TYPE_PID_T
+dnl defines pid_t if not already defined
+AC_TYPE_SIGNAL
+dnl defines RETSIGTYPE for the correct return type of signal
+AC_TYPE_SIZE_T
+dnl defines size_t if not already defined
+AC_TYPE_UID_T
+dnl defines uid_t and gid_t if not already defined
+
+dnl #####################
+dnl # checks structures #
+dnl #####################
+
+AC_HEADER_STAT
+dnl defines STAT_MACROS_BROKEN if S_ISDIR and S_ISREG
+dnl do not work properly
+AC_HEADER_TIME
+dnl defines TIME_WITH_SYS_TIME if time.h and sys/time.h can
+dnl both be included
+AC_STRUCT_ST_BLKSIZE
+dnl defines HAVE_ST_BLKSIZE if struct stat contains st_blksize
+AC_STRUCT_ST_BLOCKS
+dnl defines HAVE_ST_BLOCKS if struct stat contains st_blocks
+AC_STRUCT_ST_RDEV
+dnl defines HAVE_ST_RDEV if struct stat contains st_rdev
+AC_STRUCT_TM
+dnl defines TM_IN_SYS_TIME if struct tm is not in time.h
+AC_STRUCT_TIMEZONE
+dnl defines HAVE_ST_BLKSIZE if struct tm contains tm_zone
+dnl otherwise
+dnl defines HAVE_TZNAME if external array tzname is found
+
+dnl ###################################
+dnl # checks compiler characteristics #
+dnl ###################################
+dnl AC_C_CROSS
+
+AC_C_CONST
+dnl defines const to be empty if c-compiler does not support const fully
+AC_C_INLINE
+dnl defines inline to a sensible value for the c-compiler
+AC_C_CHAR_UNSIGNED
+dnl defines __CHAR_UNSIGNED__ if char is unsigned
+AC_C_LONG_DOUBLE
+dnl defines HAVE_LONGDOUBLE if compiler supports long double
+
+AC_C_BIGENDIAN
+dnl defines WORDS_BIGENDIAN if system is big endian
+
+AC_CHECK_SIZEOF(int *)
+AC_CHECK_SIZEOF(int)
+AC_CHECK_SIZEOF(long)
+dnl defines the size of certain types of variables in SIZEOF_???
+
+dnl ############################
+dnl # checks library functions #
+dnl ############################
+
+dnl ##########################
+dnl # checks system services #
+dnl ##########################
+
+
+AC_SYS_LONG_FILE_NAMES
+dnl defines HAVE_LONG_FILENAMES if filenames longer then
+dnl 14 chars are supported
+
+dnl AC_SYS_RESTARTABLE_SYSCALLS
+dnl defines HAVE_RESTARTABLE_SYSCALLS if the system restarts a
+dnl system call that is interrupted
+dnl by a signal
+
+dnl #################
+dnl # checks PARSER #
+dnl #################
+
+dnl YACC checks
+dnl ===========
+AC_PROG_YACC
+dnl defines YACC with the appropriate command
+
+dnl LEX checks
+dnl ==========
+AC_PROG_LEX
+dnl defines LEX with the appropriate command
+dnl defines LEXLIB with the appropriate library
+dnl what type is yytext
+AC_DECL_YYTEXT
+dnl defines YYTEXT_POINTER if yytext is char*
+dnl defines LEX_OUTPUT_ROOT as to the base of the
+dnl filename output by the lexer
+
+dnl ------------------------------------------------------------------------
+dnl main includes
+dnl ------------------------------------------------------------------------
+
+CHECK_INCLUDE="-I/usr/include $X_CFLAGS"
+CHECK_LIB="-L/lib -L/usr/lib $X_LIBS"
+
+dnl ------------------------------------------------------------------------
+dnl host system
+dnl ------------------------------------------------------------------------
+
+AC_CANONICAL_HOST
+canonical=$host
+configuration=$host_alias
+
+dnl ------------------------------------------------------------------------
+dnl system settings
+dnl ------------------------------------------------------------------------
+
+USE_UNIX=1
+
+
+USE_LINUX=
+USE_SGI=
+USE_HPUX=
+USE_SYSV=
+USE_SVR4=
+USE_AIX=
+USE_SUN=
+USE_SOLARIS=
+USE_SUNOS=
+USE_ALPHA=
+USE_OSF=
+USE_BSD=
+USE_FREEBSD=
+USE_VMS=
+USE_ULTRIX=
+USE_DATA_GENERAL=
+
+case "${canonical}" in
+ *-hp-hpux* )
+ USE_HPUX=1
+ AC_DEFINE(__HPUX__)
+ ;;
+ *-*-linux* )
+ USE_LINUX=1
+ AC_DEFINE(__LINUX__)
+ ;;
+ *-*-irix5* | *-*-irix6* )
+ USE_SGI=1
+ USE_SVR4=1
+ AC_DEFINE(__SGI__)
+ AC_DEFINE(__SVR4__)
+ ;;
+ *-*-solaris2* )
+ USE_SUN=1
+ USE_SOLARIS=1
+ USE_SVR4=1
+ AC_DEFINE(__SUN__)
+ AC_DEFINE(__SOLARIS__)
+ AC_DEFINE(__SVR4__)
+ ;;
+ *-*-sunos4* )
+ USE_SUN=1
+ USE_SUNOS=1
+ USE_BSD=1
+ AC_DEFINE(__SUN__)
+ AC_DEFINE(__SUNOS__)
+ AC_DEFINE(__BSD__)
+ ;;
+ *-*-freebsd* | *-*-netbsd*)
+ USE_BSD=1
+ USE_FREEBSD=1
+ AC_DEFINE(__FREEBSD__)
+ AC_DEFINE(__BSD__)
+ ;;
+ *-*-osf* )
+ USE_ALPHA=1
+ USE_OSF=1
+ AC_DEFINE(__ALPHA__)
+ AC_DEFINE(__OSF__)
+ ;;
+ *-*-dgux5* )
+ USE_ALPHA=1
+ USE_SVR4=1
+ AC_DEFINE(__ALPHA__)
+ AC_DEFINE(__SVR4__)
+ ;;
+ *-*-sysv5* )
+ USE_SYSV=1
+ USE_SVR4=1
+ AC_DEFINE(__SYSV__)
+ AC_DEFINE(__SVR4__)
+ ;;
+ *-*-aix* )
+ USE_AIX=1
+ USE_SYSV=1
+ USE_SVR4=1
+ AC_DEFINE(__AIX__)
+ AC_DEFINE(__SYSV__)
+ AC_DEFINE(__SVR4__)
+ ;;
+ *)
+ AC_MSG_ERROR(I don't know your system type.)
+esac
+
+dnl ------------------------------------------------------------------------
+dnl defaults for command options
+dnl ------------------------------------------------------------------------
+
+AC_OVERRIDES_PREPARE
+
+DEFAULT_USE_GTK=0
+DEFAULT_USE_QT=0
+DEFAULT_USE_MOTIF=0
+
+DEFAULT_USE_SHARED=0
+DEFAULT_USE_OPTIMISE=1
+DEFAULT_USE_PROFILE=0
+DEFAULT_USE_DEBUG_FLAG=0
+DEFAULT_USE_DEBUG_INFO=0
+DEFAULT_USE_MEM_TRACING=0
+
+DEFAULT_USE_ZLIB=1
+DEFAULT_USE_GDK_IMLIB=1
+DEFAULT_USE_LIBPNG=1
+DEFAULT_USE_ODBC=1
+
+DEFAULT_USE_APPLE_IEEE=1
+DEFAULT_USE_STORABLE_CLASSES=1
+DEFAULT_USE_AUTOTRANS=1
+DEFAULT_USE_AFM_FOR_POSTSCRIPT=1
+DEFAULT_WX_NORMALIZED_PS_FONTS=1
+
+DEFAULT_USE_IOSTREAMH=1
+
+DEFAULT_USE_OPENGL=0
+
+DEFAULT_USE_WXCONFIG=1
+DEFAULT_USE_POSTSCRIPT=1
+DEFAULT_USE_IPC=1
+DEFAULT_USE_RESOURCES=1
+DEFAULT_USE_TIMEDATE=1
+DEFAULT_USE_FRACTION=1
+DEFAULT_USE_CONSTRAINTS=1
+DEFAULT_USE_TOOLBAR=1
+DEFAULT_USE_GAUGE=1
+DEFAULT_USE_SCROLLBAR=1
+DEFAULT_USE_DOC_VIEW_ARCHITECTURE=1
+DEFAULT_USE_PRINTING_ARCHITECTURE=1
+
+DEFAULT_USE_METAFILE=0
+DEFAULT_USE_HELP=0
+DEFAULT_USE_CLIPBOARD=0
+DEFAULT_USE_VLBOX=0
+DEFAULT_USE_WXGRAPH=0
+DEFAULT_USE_WXTREE=0
+DEFAULT_USE_ENHANCED_DIALOG=0
+
+DEFAULT_USE_FORM=0
+DEFAULT_USE_PROLOGIO=1
+DEFAULT_USE_RPC=0
+DEFAULT_USE_WX_RESOURCES=1
+
+dnl ----------------------------------------------------------------
+dnl toolkit options
+dnl ----------------------------------------------------------------
+
+AC_OVERRIDES(gtk,gtk,
+**--with-gtk use GTK,
+USE_GTK)
+
+AC_OVERRIDES(qt,qt,
+**--with-qt use Qt,
+USE_QT)
+
+AC_OVERRIDES(motif,motif,
+**--with-motif use Motif/Lesstif,
+USE_MOTIF)
+
+dnl ----------------------------------------------------------------
+dnl compile options
+dnl ----------------------------------------------------------------
+
+AC_OVERRIDES(shared,shared,
+**--with-shared create shared libraries,
+USE_SHARED)
+
+AC_OVERRIDES(optimise,optimise,
+**--with-optimise create optimised code,
+USE_OPTIMISE)
+
+AC_OVERRIDES(debug_flag,debug_flag,
+**--with-debug_flag create code with WXDEBUG define set to 1,
+USE_DEBUG_FLAG)
+
+AC_OVERRIDES(debug_info,debug_info,
+**--with-debug_info create code with debuging information included,
+USE_DEBUG_INFO)
+
+AC_OVERRIDES(mem_tracing,mem_tracing,
+**--with-mem_traing create code with memory tracing,
+USE_MEM_TRACING)
+
+AC_OVERRIDES(profile,profile,
+**--with-profile create code with profiling information included,
+USE_PROFILE)
+
+dnl ----------------------------------------------------------------
+dnl user options for libraries (no choice yet)
+dnl ----------------------------------------------------------------
+
+AC_OVERRIDES(zlib,zlib,
+**--with-zlib use zlib (LZW comression),
+USE_ZLIB)
+
+AC_OVERRIDES(gdk_imlib,gdk_imlib,
+**--with-gdk_imlib use Raster's gdk_imlib (Image library),
+USE_GDK_IMLIB)
+
+AC_OVERRIDES(libpng,libpng,
+**--with-libpng use libpng (PNG image format),
+USE_LIBPNG)
+
+AC_OVERRIDES(odbc,odbc,
+**--with-odbc use iODBC,
+USE_ODBC)
+
+AC_OVERRIDES(opengl,opengl,
+**--with-opengl use opengl (OpenGL or Mesa),
+USE_OPENGL)
+
+dnl ----------------------------------------------------------------
+dnl user options for code features (no choice yet)
+dnl ----------------------------------------------------------------
+
+AC_OVERRIDES(apple_ieee, apple_ieee,
+**--with_apple_ieee use the Apple IEEE codec,
+USE_APPLE_IEEE)
+
+AC_OVERRIDES(storable,storable,
+**--with-storable use storable classes,
+USE_STORABLE_CLASSES)
+
+AC_OVERRIDES(autotrans,autotrans,
+**--with-autotrans use gettext automatic translation,
+USE_AUTOTRANS)
+
+AC_OVERRIDES(afmfonts,afmfonts,
+**--with-afmfonts use Adobe Font Metric Font table,
+USE_AFM_FOR_POSTSCRIPT)
+
+AC_OVERRIDES(normalized, normalized,
+**--with-PS-normalized use normalized PS fonts,
+WX_NORMALIZED_PS_FONTS)
+
+AC_OVERRIDES(rpc,RPC,
+**--with-rpc use RPC,
+USE_RPC)
+
+AC_OVERRIDES(wxresources,wxresources,
+**--with-wxresources use wxresources,
+USE_WX_RESOURCES)
+
+AC_OVERRIDES(prologio,prologio,
+**--with-prologio use prologio,
+USE_PROLOGIO)
+
+AC_OVERRIDES(postscript, postscript,
+**--with-postscript use postscript-device-context,
+USE_POSTSCRIPT)
+
+AC_OVERRIDES(wxconfig, wxconfig,
+**--with-wxconfig use wxconfig,
+USE_WXCONFIG)
+
+AC_OVERRIDES(metafile, metafile,
+**--with-metafile use metafile,
+USE_METAFILE)
+
+AC_OVERRIDES(form,form,
+**--with-form use form,
+USE_FORM)
+
+AC_OVERRIDES(help,help,
+**--with-help use help,
+USE_HELP)
+
+AC_OVERRIDES(ipc,IPC,
+**--with-ipc use ipc,
+USE_IPC)
+
+AC_OVERRIDES(enhanceddialog,enhanced dialog,
+**--with-enhanceddialog use enhanced dialog,
+USE_ENHANCED_DIALOG)
+
+AC_OVERRIDES(resources,resources,
+**--with-resources use resources,
+USE_RESOURCES)
+
+AC_OVERRIDES(clipboard,clipboard,
+**--with-clipboard use clipboard,
+USE_CLIPBOARD)
+
+AC_OVERRIDES(timedate, timedate,
+**--with-timedate use timedate,
+USE_TIMEDATE)
+
+AC_OVERRIDES(fraction,fraction,
+**--with-fraction use fraction,
+USE_FRACTION)
+
+AC_OVERRIDES(constraints,constrains,
+**--with-constraints use constraints,
+USE_CONSTRAINTS)
+
+AC_OVERRIDES(toolbar,toolbar,
+**--with-toolbar use toolbar,
+USE_TOOLBAR)
+
+AC_OVERRIDES(gauge,gauge,
+**--with-gauge use gauge,
+USE_GAUGE)
+
+AC_OVERRIDES(vllist,vllist,
+**--with-vlbox use virtual list box,
+USE_VLBOX)
+
+AC_OVERRIDES(scrollbar,scrollbar,
+**--with-scrollbar use scrollbar,
+USE_SCROLLBAR)
+
+AC_OVERRIDES(docview,docview,
+**--with-docview use document view architecture,
+USE_DOC_VIEW_ARCHITECTURE)
+
+AC_OVERRIDES(printarch,printarch,
+**--with-printarch use printing architecture,
+USE_PRINTING_ARCHITECTURE)
+
+AC_OVERRIDES(typetree,typetree,
+**--with-typetree use typetree,
+USE_TYPETREE)
+
+AC_OVERRIDES(wxgraph,wxgraph,
+**--with-wxgraph use wxgraph,
+USE_WXGRAPH)
+
+AC_OVERRIDES(wxtree,wxtree,
+**--with-wxtree use wxtree,
+USE_WXTREE)
+
+dnl AC_OVERRIDES(package,message,helpmessage,variable)
+
+dnl ----------------------------------------------------------------
+dnl Unix, obviously
+dnl ----------------------------------------------------------------
+
+if test "$USE_UNIX" = 1 ; then
+ AC_DEFINE(__UNIX__)
+fi
+
+dnl ----------------------------------------------------------------
+dnl search for toolkit (widget sets)
+dnl ----------------------------------------------------------------
+
+TOOLKIT=
+TOOLKIT_DEF=
+
+GUI_TK_INCLUDE=
+GUI_TK_LIBRARY=
+GUI_TK_LINK=
+
+MAKEINCLUDE=
+
+if test "$USE_GTK" = 1; then
+ AM_PATH_GTK(0.99.7, [
+ GUI_TK_INCLUDE="$GTK_CFLAGS"
+ GUI_TK_LIBRARY="$GTK_LIBS"
+ ], AC_MSG_ERROR(Are gtk-config and the GTK in path and up-to-date?))
+ AC_DEFINE(__WXGTK__)
+ TOOLKIT=GTK
+ TOOLKIT_DEF=__WXGTK__
+ MAKEINCLUDE=../gtk.inc
+fi
+
+if test "$USE_QT" = 1; then
+ AC_MSG_CHECKING(for Qt includes)
+ AC_PATH_FIND_INCLUDES($SEARCH_INCLUDE,qt.h)
+ if test "$ac_find_includes" != "" ; then
+ AC_MSG_RESULT(found $ac_find_includes)
+ AC_MSG_CHECKING(for Qt library)
+ AC_PATH_FIND_LIBRARIES($SEARCH_LIB,Qt)
+ if test "$ac_find_libraries" != "" ; then
+ AC_INCLUDE_PATH_EXIST($ac_find_includes,$CHECK_INCLUDE)
+ AC_LINK_PATH_EXIST($ac_find_libraries,$CHECK_LIB)
+ CHECK_LINK="$CHECK_INCLUDE $ac_path_to_link"
+ CHECK_INCLUDE="$CHECK_INCLUDE $ac_path_to_include"
+ AC_MSG_RESULT(found Qt at $ac_find_libraries)
+ else
+ AC_MSG_ERROR(no)
+ fi
+ else
+ AC_MSG_ERROR(no)
+ fi
+ GUI_TK_LINK=-lXext -lX11 -lqt -lm
+ AC_DEFINE(__WXQT__)
+ TOOLKIT=QT
+ TOOLKIT_DEF=__WXQT__
+ MAKEINCLUDE=../qt.inc
+fi
+
+if test "$USE_MOTIF" = 1; then
+ AC_MSG_CHECKING(for Motif/Lesstif includes)
+ AC_PATH_FIND_INCLUDES($SEARCH_INCLUDE,qt.h)
+ if test "$ac_find_includes" != "" ; then
+ AC_MSG_RESULT(found $ac_find_includes)
+ AC_MSG_CHECKING(for Motif/Lesstif library)
+ AC_PATH_FIND_LIBRARIES($SEARCH_LIB,Xm)
+ if test "$ac_find_libraries" != "" ; then
+ AC_INCLUDE_PATH_EXIST($ac_find_includes,$CHECK_INCLUDE)
+ AC_LINK_PATH_EXIST($ac_find_libraries,$CHECK_LIB)
+ CHECK_LINK="$CHECK_INCLUDE $ac_path_to_link"
+ CHECK_INCLUDE="$CHECK_INCLUDE $ac_path_to_include"
+ AC_MSG_RESULT(found Motif/Lesstif at $ac_find_libraries)
+ else
+ AC_MSG_ERROR(no)
+ fi
+ else
+ AC_MSG_ERROR(no)
+ fi
+ GUI_TK_LINK=-lXext -lX11 -lXm -lm
+ AC_DEFINE(__WXMOTIF__)
+ TOOLKIT=MOTIF
+ TOOLKIT_DEF=__WXMOTIF__
+ MAKEINCLUDE=../motif.inc
+fi
+
+if test "$TOOLKIT" = ""; then
+ AC_MSG_ERROR(You must specify a toolkit: --with-gtk --with-qt --with-motif)
+fi
+
+AC_SUBST(GUI_TK_INCLUDE)
+AC_SUBST(GUI_TK_LIBRARY)
+AC_SUBST(GUI_TK_LINK)
+
+AC_SUBST(TOOLKIT)
+AC_SUBST(TOOLKIT_DEF)
+
+AC_SUBST(MAKEINCLUDE)
+
+dnl ----------------------------------------------------------------
+dnl register changes for Makefiles (via substit) and setup.h
+dnl ----------------------------------------------------------------
+
+ZLIB=NONE
+if test "$USE_ZLIB" = 1 ; then
+ ZLIB="ZLIB"
+fi
+
+GDK_IMLIB=NONE
+if test "$USE_GDK_IMLIB" = 1 ; then
+ GDK_IMLIB="GDK_IMLIB"
+fi
+
+LIBPNG=NONE
+if test "$USE_LIBPNG" = 1 ; then
+ LIBPNG="LIBPNG"
+fi
+
+ODBC=NONE
+if test "$USE_ODBC" = 1 ; then
+ ODBC="ODBC"
+fi
+
+APPLE_IEEE=NONE
+if test "$USE_APPLE_IEEE" = 1 ; then
+ APPLE_IEEE="APPLE_IEEE"
+ AC_DEFINE_UNQUOTED(USE_APPLE_IEEE,$USE_APPLE_IEEE)
+fi
+
+STORABLE=NONE
+if test "$USE_STORABLE_CLASSES" = 1 ; then
+ STORABLE="STORABLE"
+ AC_DEFINE_UNQUOTED(USE_STORABLE_CLASSES,$USE_STORABLE_CLASSES)
+fi
+
+AUTOTRANS=NONE
+if test "$USE_AUTOTRANS" = 1 ; then
+ AUTOTRANS="AUTOTRANS"
+ AC_DEFINE_UNQUOTED(USE_AUTOTRANS,$USE_AUTOTRANS)
+fi
+
+WXDEBUG=
+if test "$USE_DEBUG_INFO" = 1 ; then
+ WXDEBUG="-g -O0"
+fi
+AC_SUBST(WXDEBUG)
+
+if test "$USE_DEBUG_FLAG" = 1 ; then
+ AC_DEFINE_UNQUOTED(WXDEBUG,$USE_DEBUG_FLAG)
+ WXDEBUG_DEFINE="-D__WXDEBUG__"
+ AC_SUBST(WXDEBUG_DEFINE)
+fi
+
+if test "$USE_MEM_TRACING" = 1 ; then
+ AC_DEFINE_UNQUOTED(USE_MEMORY_TRACING,$USE_MEM_TRACING)
+ dnl AC_DEFINE_UNQUOTED(USE_GLOBAL_MEMORY_OPERATORS,$USE_MEM_TRACING)
+fi
+
+PROFILE=
+if test "$USE_PROFILE" = 1 ; then
+ PROFILE="-pg"
+fi
+AC_SUBST(PROFILE)
+
+CXXFLAGS=`echo "${CXXFLAGS}" | sed "s/\-O.//g" `
+CFLAGS=`echo "${CFLAGS}" | sed "s/\-O.//g" `
+if test "$USE_OPTIMISE" = 0 ; then
+ OPTIMISE=
+else
+ if test "$GCC" = yes ; then
+ OPTIMISE="-O2"
+ case "${canonical}" in
+ i586-*-*|i686-*-* )
+ OPTIMISE="${OPTIMISE} "
+ ;;
+ esac
+ else
+ OPTIMISE="-O"
+ fi
+fi
+AC_SUBST(OPTIMISE)
+
+USE_IOSTREAMH=$DEFAULT_USE_IOSTREAMH
+AC_DEFINE_UNQUOTED(USE_IOSTREAMH,$USE_IOSTREAMH)
+
+RPC=NONE
+if test "$USE_RPC" = 1 ; then
+ RPC="RPC"
+ AC_DEFINE_UNQUOTED(USE_RPC,$USE_RPC)
+fi
+AC_SUBST(RPC)
+
+WXRESOURCES=NONE
+if test "$USE_WX_RESOURCES" = 1 ; then
+ WXRESOURCES="WXRESOURCES"
+ AC_DEFINE_UNQUOTED(USE_WX_RESOURCES,$USE_WX_RESOURCES)
+fi
+AC_SUBST(WXRESOURCES)
+
+PROLOGIO=NONE
+PROLOGIOSRC=NONE
+if test "$USE_PROLOGIO" = 1 ; then
+ PROLOGIO="PROLOGIO"
+ PROLOGIOSRC="PROLOGIOSRC"
+ AC_DEFINE_UNQUOTED(USE_PROLOGIO)
+fi
+AC_SUBST(PROLOGIO)
+AC_SUBST(PROLOGIOSRC)
+
+POSTSCRIPTDC=NONE
+if test "$USE_POSTSCRIPT" = 1 ; then
+ POSTSCRIPTDC="POSTSCRIPTDC"
+ AC_DEFINE_UNQUOTED(USE_POSTSCRIPT)
+fi
+AC_SUBST(POSTSCRIPTDC)
+
+if test "$USE_WXCONFIG" = 1 ; then
+ AC_DEFINE_UNQUOTED(USE_WXCONFIG,$USE_WXCONFIG)
+fi
+
+METAFILE=NONE
+if test "$USE_METAFILE" = 1 ; then
+ METAFILE="METAFILE"
+ AC_DEFINE_UNQUOTED(USE_METAFILE,$USE_METAFILE)
+fi
+AC_SUBST(METAFILE)
+
+FORM=NONE
+if test "$USE_FORM" = 1 ; then
+ FORM="FORM"
+ AC_DEFINE_UNQUOTED(USE_FORM,$USE_FORM)
+fi
+AC_SUBST(FORM)
+
+HELP=NONE
+if test "$USE_HELP" = 1 ; then
+ HELP="HELP"
+ AC_DEFINE_UNQUOTED(USE_HELP,$USE_HELP)
+fi
+AC_SUBST(HELP)
+
+IPC=NONE
+if test "$USE_IPC" = 1 ; then
+ IPC="IPC"
+ AC_DEFINE_UNQUOTED(USE_IPC)
+fi
+AC_SUBST(IPC)
+
+ENHDIALOGBOX=NONE
+if test "$USE_ENHANCED_DIALOG" = 1 ; then
+ ENHDIALOGBOX="ENHDIALOGBOX"
+ AC_DEFINE_UNQUOTED(USE_ENHANCED_DIALOG,$USE_ENHANCED_DIALOG)
+fi
+AC_SUBST(ENHDIALOGBOX)
+
+XRESOURCES=NONE
+if test "$USE_RESOURCES" = 1 ; then
+ XRESOURCES="XRESOURCES"
+ AC_DEFINE_UNQUOTED(USE_RESOURCES,$USE_RESOURCES)
+fi
+AC_SUBST(XRESOURCES)
+
+CLIPBOARD=NONE
+if test "$USE_CLIPBOARD" = 1 ; then
+ CLIPBOARD="CLIPBOARD"
+ AC_DEFINE_UNQUOTED(USE_CLIPBOARD,$USE_CLIPBOARD)
+fi
+AC_SUBST(CLIPBOARD)
+
+CONSTRAINTS=NONE
+if test "$USE_CONSTRAINTS" = 1 ; then
+ CONSTRAINTS="CONSTRAINTS"
+ AC_DEFINE_UNQUOTED(USE_CONSTRAINTS,$USE_CONSTRAINTS)
+fi
+AC_SUBST(CONSTRAINTS)
+
+TIMEDATE=NONE
+if test "$USE_TIMEDATE" = 1 ; then
+ TIMEDATE="TIMEDATE"
+ AC_DEFINE_UNQUOTED(USE_TIMEDATE,$USE_TIMEDATE)
+fi
+AC_SUBST(TIMEDATE)
+
+FRACTION=NONE
+if test "$USE_FRACTION" = 1 ; then
+ FRACTION="FRACTION"
+ AC_DEFINE_UNQUOTED(USE_FRACTION,$USE_FRACTION)
+fi
+AC_SUBST(FRACTION)
+
+TOOLBAR=NONE
+if test "$USE_TOOLBAR" = 1 ; then
+ TOOLBAR="TOOLBAR"
+ AC_DEFINE_UNQUOTED(USE_TOOLBAR,$USE_TOOLBAR)
+ AC_DEFINE_UNQUOTED(USE_XT_TOOLBAR,$USE_XT_TOOLBAR)
+fi
+AC_SUBST(TOOLBAR)
+
+GAUGE=NONE
+if test "$USE_GAUGE" = 1 ; then
+ GAUGE="GAUGE"
+ AC_SUBST(GAUGE)
+ AC_DEFINE_UNQUOTED(USE_GAUGE,$USE_GAUGE)
+fi
+
+VIRLISTBOX=NONE
+if test "$USE_VLBOX" = 1 ; then
+ VIRTLISTBOX="VIRLISTBOX"
+ AC_DEFINE_UNQUOTED(USE_VIRLISTBOX,$USE_VIRLISTBOX)
+fi
+AC_SUBST(VIRLISTBOX)
+
+SCROLLBAR=NONE
+if test "$USE_SCROLLBAR" = 1 ; then
+ SCROLLBAR="SCROLLBAR"
+ AC_DEFINE_UNQUOTED(USE_SCROLLBAR,$USE_SCROLLBAR)
+fi
+AC_SUBST(SCROLLBAR)
+
+DOCVIEW=NONE
+if test "$USE_DOC_VIEW_ARCHITECTURE" = 1 ; then
+ DOCVIEW="DOCVIEW"
+ AC_DEFINE_UNQUOTED(USE_DOC_VIEW_ARCHITECTURE,$USE_DOC_VIEW_ARCHITECTURE)
+fi
+AC_SUBST(DOCVIEW)
+
+PRINTPREVIEW=NONE
+if test "$USE_PRINTING_ARCHITECTURE" = 1 ; then
+ PRINTPREVIEW="PRINTPREVIEW"
+ AC_DEFINE_UNQUOTED(USE_PRINTING_ARCHITECTURE,$USE_PRINTING_ARCHITECTURE)
+fi
+AC_SUBST(PRINTPREVIEW)
+
+TYPETREE=NONE
+if test "$USE_TYPETREE" = 1 ; then
+ TYPETREE="TYPETREE"
+ AC_DEFINE_UNQUOTED(USE_TYPETREE,$USE_TYPETREE)
+fi
+AC_SUBST(TYPETREE)
+
+WXGRAPH=NONE
+if test "$USE_WXGRAPH" = 1 ; then
+ WXGRAPH="WXGRAPH"
+ AC_DEFINE_UNQUOTED(USE_WXGRAPH,$USE_WXGRAPH)
+fi
+AC_SUBST(WXGRAPH)
+
+WXTREE=NONE
+if test "$USE_WXTREE" = 1 ; then
+ WXTREE="WXTREE"
+ AC_DEFINE_UNQUOTED(USE_WXTREE,$USE_WXTREE)
+fi
+AC_SUBST(WXTREE)
+
+GLCANVAS=NONE
+if test "$USE_OPENGL" = 1 ; then
+ GLCANVAS="GLCANVAS"
+fi
+
+AC_DEFINE_UNQUOTED(USE_AFM_FOR_POSTSCRIPT,$USE_AFM_FOR_POSTSCRIPT)
+
+AC_DEFINE_UNQUOTED(WX_NORMALIZED_PS_FONTS,$WX_NORMALIZED_PS_FONTS)
+
+dnl ----------------------------------------------------------------
+dnl select dynamic loader (used by iODBC to load drivers)
+dnl ----------------------------------------------------------------
+
+DL_LIBRARY=-ldl
+
+AC_SUBST(DL_LIBRARY)
+
+dnl ----------------------------------------------------------------
+dnl thread support
+dnl ----------------------------------------------------------------
+
+USE_THREADS=1
+THREADS_LINK=""
+UNIX_THREAD=""
+
+AC_ARG_WITH(threads,
+[ --without-threads Force disabling threads ],
+[USE_THREADS="$withval"])
+
+if test "$USE_THREADS" = "1"; then
+ UNIX_THREAD="gtk/threadno.cpp"
+
+ dnl For glibc 2 users who have the old libc 5 too
+
+ AC_CHECK_LIB(pthread-0.7, pthread_create, [
+ UNIX_THREAD="gtk/threadpsx.cpp"
+ THREADS_LINK="-lpthread-0.7"
+ AC_DEFINE(USE_THREADS)
+ ],[
+ AC_CHECK_LIB(pthread, pthread_create, [
+ UNIX_THREAD="gtk/threadpsx.cpp"
+ THREADS_LINK="-lpthread"
+ AC_DEFINE(USE_THREADS)
+ ])
+ ])
+ AC_CHECK_LIB(pthreads, pthread_create, [
+ UNIX_THREAD="gtk/threadpsx.cpp"
+ THREADS_LINK="-lpthreads"
+ AC_DEFINE(USE_THREADS)
+ ])
+ AC_CHECK_HEADER(sys/prctl.h, [
+ UNIX_THREAD="gtk/threadsgi.cpp"
+ AC_DEFINE(USE_THREADS)
+ ])
+fi
+
+AC_SUBST(UNIX_THREAD)
+AC_SUBST(THREADS_LINK)
+
+dnl defines UNIX_THREAD it contains the source file to use for threads. (GL)
+dnl defines THREADS_LINK it contains the thread library to link with. (GL)
+dnl defines USE_THREADS if thread support is activated. (GL)
+
+dnl ----------------------------------------------------------------
+dnl search for opengl
+dnl ----------------------------------------------------------------
+
+OPENGL_INCLUDE=
+OPENGL_LIBRARY=
+OPENGL_LINK=
+
+if test "$USE_OPENGL" = 1; then
+ dnl checking OPENGL includes
+ AC_MSG_CHECKING(for OpenGL includes)
+ AC_PATH_FIND_INCLUDES($SEARCH_INCLUDE,GL/gl.h)
+ if test "$ac_find_includes" != "" ; then
+ OPENGL_INCLUDE="-I$ac_find_includes"
+ AC_MSG_RESULT(found $ac_find_includes)
+ dnl checking OPENGL libraries
+ AC_MSG_CHECKING(for OpenGL library)
+ AC_PATH_FIND_LIBRARIES($SEARCH_LIB,GL)
+ if test "$ac_find_libraries" != "" ; then
+ AC_INCLUDE_PATH_EXIST($ac_find_includes,$CHECK_INCLUDE)
+ AC_LINK_PATH_EXIST($ac_find_libraries,$CHECK_LIB)
+ CHECK_LINK="$CHECK_INCLUDE $ac_path_to_link"
+ CHECK_INCLUDE="$CHECK_INCLUDE $ac_path_to_include"
+ OPENGL_LIBRARY="$ac_path_to_link"
+ OPENGL_INCLUDE="$ac_path_to_include"
+ OPENGL_LINK="-lGL"
+ AC_MSG_RESULT(found OpenGL at $ac_find_libraries)
+ else
+ AC_PATH_FIND_LIBRARIES($SEARCH_LIB,MesaGL)
+ if test "$ac_find_libraries" != "" ; then
+ AC_INCLUDE_PATH_EXIST($ac_find_includes,$CHECK_INCLUDE)
+ AC_LINK_PATH_EXIST($ac_find_libraries,$CHECK_LIB)
+ CHECK_LINK="$CHECK_INCLUDE $ac_path_to_link"
+ CHECK_INCLUDE="$CHECK_INCLUDE $ac_path_to_include"
+ OPENGL_LIBRARY="$ac_path_to_link"
+ OPENGL_INCLUDE="$ac_path_to_include"
+ OPENGL_LINK="-lMesaGL"
+ AC_MSG_RESULT(found MESA at $ac_find_libraries)
+ else
+ AC_MSG_ERROR(no)
+ fi
+ fi
+ else
+ AC_MSG_ERROR(no)
+ fi
+fi
+
+dnl ----------------------------------------------------------------
+dnl search for gdk_imlib
+dnl ----------------------------------------------------------------
+dnl
+dnl GDK_IMLIB_INCLUDE=
+dnl GDK_IMLIB_LIBRARY=
+dnl GDK_IMLIB_LINK=
+dnl
+ if test "$USE_GDK_IMLIB" = 1; then
+dnl AC_MSG_CHECKING(for gdk_imlib includes)
+dnl AC_PATH_FIND_INCLUDES($SEARCH_INCLUDE,gdk_imlib.h)
+dnl if test "$ac_find_includes" != "" ; then
+dnl dnl GDK_IMLIB_INCLUDE="-I$ac_find_includes"
+dnl AC_MSG_RESULT(found $ac_find_includes)
+dnl AC_MSG_CHECKING(for gdk_imlib library)
+dnl AC_PATH_FIND_LIBRARIES($SEARCH_LIB,gdk_imlib)
+dnl if test "$ac_find_libraries" != "" ; then
+dnl AC_INCLUDE_PATH_EXIST($ac_find_includes,$CHECK_INCLUDE)
+dnl AC_LINK_PATH_EXIST($ac_find_libraries,$CHECK_LIB)
+dnl CHECK_LINK="$CHECK_INCLUDE $ac_path_to_link"
+dnl CHECK_INCLUDE="$CHECK_INCLUDE $ac_path_to_include"
+dnl GDK_IMLIB_LIBRARY="$ac_path_to_link"
+dnl GDK_IMLIB_INCLUDE="$ac_path_to_include"
+dnl GDK_IMLIB_LINK="-lgdk_imlib"
+dnl AC_MSG_RESULT(found gdk_imlib at $ac_find_libraries)
+dnl else
+dnl AC_MSG_ERROR(no)
+dnl fi
+dnl else
+dnl AC_MSG_ERROR(no)
+dnl fi
+ AC_DEFINE_UNQUOTED(USE_GDK_IMLIB,$USE_GDK_IMLIB)
+ fi
+dnl AC_SUBST(GDK_IMLIB_INCLUDE)
+dnl AC_SUBST(GDK_IMLIB_LIBRARY)
+dnl AC_SUBST(GDK_IMLIB_LINK)
+
+dnl ----------------------------------------------------------------
+dnl search for zlib
+dnl ----------------------------------------------------------------
+dnl
+dnl ZLIB_INCLUDE=
+dnl ZLIB_LINK=
+dnl
+ if test "$USE_ZLIB" = 1; then
+dnl AC_MSG_CHECKING(for zlib includes)
+dnl AC_PATH_FIND_INCLUDES($SEARCH_INCLUDE,zlib.h)
+dnl if test "$ac_find_includes" != "" ; then
+dnl AC_MSG_RESULT(found $ac_find_includes)
+dnl AC_MSG_CHECKING(for zlib library)
+dnl AC_PATH_FIND_LIBRARIES($SEARCH_LIB,z)
+dnl if test "$ac_find_libraries" != "" ; then
+dnl AC_INCLUDE_PATH_EXIST($ac_find_includes,$CHECK_INCLUDE)
+dnl AC_LINK_PATH_EXIST($ac_find_libraries,$CHECK_LIB)
+dnl CHECK_LINK="$CHECK_INCLUDE $ac_path_to_link"
+dnl CHECK_INCLUDE="$CHECK_INCLUDE $ac_path_to_include"
+dnl ZLIB_INCLUDE="$ac_path_to_include"
+dnl ZLIB_LINK="-lz"
+dnl AC_MSG_RESULT(found zlib at $ac_find_libraries)
+dnl else
+dnl AC_MSG_ERROR(no)
+dnl fi
+dnl else
+dnl AC_MSG_ERROR(no)
+dnl fi
+ AC_DEFINE_UNQUOTED(USE_ZLIB,$USE_ZLIB)
+ fi
+dnl AC_SUBST(ZLIB_INCLUDE)
+dnl AC_SUBST(ZLIB_LIBRARY)
+dnl AC_SUBST(ZLIB_LINK)
+
+dnl ----------------------------------------------------------------
+dnl search for libpng
+dnl ----------------------------------------------------------------
+dnl
+dnl LIBPNG_INCLUDE=
+dnl LIBPNG_LIBRARY=
+dnl LIBPNG_LINK=
+dnl
+ if test "$USE_LIBPNG" = 1; then
+dnl AC_MSG_CHECKING(for libpng includes)
+dnl AC_PATH_FIND_INCLUDES($SEARCH_INCLUDE,png.h)
+dnl if test "$ac_find_includes" != "" ; then
+dnl AC_MSG_RESULT(found $ac_find_includes)
+dnl AC_MSG_CHECKING(for libpng library)
+dnl AC_PATH_FIND_LIBRARIES($SEARCH_LIB,png)
+dnl if test "$ac_find_libraries" != "" ; then
+dnl AC_INCLUDE_PATH_EXIST($ac_find_includes,$CHECK_INCLUDE)
+dnl AC_LINK_PATH_EXIST($ac_find_libraries,$CHECK_LIB)
+dnl CHECK_LINK="$CHECK_INCLUDE $ac_path_to_link"
+dnl CHECK_INCLUDE="$CHECK_INCLUDE $ac_path_to_include"
+dnl LIBPNG_LIBRARY="$ac_path_to_link"
+dnl LIBPNG_INCLUDE="$ac_path_to_include"
+dnl LIBPNG_LINK="-lpng"
+dnl AC_MSG_RESULT(found libpng at $ac_find_libraries)
+dnl else
+dnl AC_MSG_RESULT(no)
+dnl fi
+dnl else
+dnl AC_MSG_ERROR(no)
+dnl fi
+ AC_DEFINE_UNQUOTED(USE_LIBPNG,$USE_LIBPNG)
+ fi
+dnl AC_SUBST(LIBPNG_INCLUDE)
+dnl AC_SUBST(LIBPNG_LIBRARY)
+dnl AC_SUBST(LIBPNG_LINK)
+
+dnl ----------------------------------------------------------------
+dnl search for iODBC
+dnl ----------------------------------------------------------------
+dnl
+ if test "$USE_ODBC" = 1; then
+ AC_DEFINE_UNQUOTED(USE_ODBC,$USE_ODBC)
+ fi
+
+dnl ----------------------------------------------------------------
+dnl search for Python
+dnl ----------------------------------------------------------------
+
+dnl ----------------------------------------------------------------
+dnl left-over
+dnl ----------------------------------------------------------------
+
+USE_GLX=$USE_OPENGL
+if test "$USE_OPENGL" != 1; then
+ OPENGL_LIBRARIES=
+ OPENGL_INCLUDE=
+ OPENGL_LINK=
+ GLCANVAS=NONE
+fi
+
+AC_DEFINE_UNQUOTED(USE_GLX,$USE_GLX)
+AC_SUBST(OPENGL_INCLUDE)
+AC_SUBST(OPENGL_LIBRARY)
+AC_SUBST(OPENGL_LINK)
+AC_SUBST(GLCANVAS)
+
+dnl ------------------------------------------------------------------------
+dnl compiler options for shared libs
+dnl ------------------------------------------------------------------------
+
+PICFLAGS=
+CREATE_SHARED=
+case "${canonical}" in
+
+ *-hp-hpux* )
+ if test "${CC}" != "gcc" ; then
+ CXXFLAGS="${CXXFLAGS} +a1 -z -Aa -D_HPUX_SOURCE"
+ CFLAGS="${CFLAGS} -z -D_HPUX_SOURCE"
+ PICFLAGS="+z"
+ else
+ PICFLAGS="-fPIC"
+ fi
+ LDFLAGS="-Wl,+s"
+ CREATE_SHARED=sharedHpux
+ ;;
+
+ *-*-linux* )
+ PICFLAGS=-fPIC
+ CREATE_SHARED=sharedLinux
+ ;;
+
+ *-*-irix5* | *-*-irix6* )
+ # PICFLAGS can remain empty, as pic is the default
+ LDFLAGS="-Wl,+s"
+ CREATE_SHARED=sharedIrix
+ AC_DEFINE(SVR4)
+ ;;
+
+ *-*-solaris2* )
+ if test "${CC}" != "gcc" ; then
+ PICFLAGS="-KPIC"
+ else
+ PICFLAGS="-fPIC"
+ fi
+ CREATE_SHARED=sharedSolaris2
+ AC_DEFINE(SVR4)
+ ;;
+
+ *-*-sunos4* )
+ if test "${CC}" != "gcc" ; then
+ PICFLAGS="-PIC"
+ else
+ PICFLAGS="-fPIC"
+ fi
+ LDFLAGS="-Wl,+s"
+ CREATE_SHARED=sharedSunos4
+ AC_DEFINE(BSD)
+ ;;
+
+ *-*-freebsd* | *-*-netbsd*)
+ PICFLAGS=-fPIC
+ CREATE_SHARED=sharedBsd
+ AC_DEFINE(BSD)
+ ;;
+
+ *-*-osf* )
+ PICFLAGS="-fPIC"
+ CREATE_SHARED=sharedOSF
+ ;;
+
+ *-*-dgux5* )
+ if test "${CC}" != "gcc" ; then
+ PICFLAGS="-K PIC"
+ else
+ PICFLAGS="-fPIC"
+ fi
+ CREATE_SHARED=sharedDgux
+ AC_DEFINE(SVR4)
+ ;;
+
+ *-*-sysv5* )
+ if test "${CC}" != "gcc" ; then
+ PICFLAGS="-K PIC"
+ else
+ PICFLAGS="-fPIC"
+ fi
+ CREATE_SHARED=sharedSysV
+ AC_DEFINE(SVR4)
+ ;;
+
+ *-*-aix* )
+ if test "${CC}" != "gcc" ; then
+ PICFLAGS="-bM\:SRE"
+ else
+ PICFLAGS="-fPIC"
+ fi
+ CREATE_SHARED=sharedAIX
+ AC_DEFINE(SYSV)
+ ;;
+
+ *)
+ CREATE_SHARED=
+ PICFLAGS=
+esac
+
+if test "x$GCC" = xyes; then
+ CFLAGS="${CFLAGS} -Wall"
+fi
+
+if test "x$GXX" = xyes; then
+ CXXFLAGS="${CXXFLAGS} -Wall"
+fi
+
+if test "$USE_SHARED" != 1; then
+ CREATE_SHARED=
+ PICFLAGS=
+fi
+
+AC_SUBST(OS)
+AC_SUBST(PICFLAGS)
+AC_SUBST(CREATE_SHARED)
+
+dnl ------------------------------------------------------------------------
+dnl finish and clean-up
+dnl ------------------------------------------------------------------------
+
+dnl add OS to list of configured
+echo $OS >> system.list
+echo $OS >> ../../system.list
+
+AC_CONFIG_HEADER(./setup/setup.h:./setup/setup.hin)
+AC_OUTPUT(./setup/substit,)
+
+AC_OVERRIDES_DONE
--- /dev/null
+#! /bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission. M.I.T. makes no representations about the
+# suitability of this software for any purpose. It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd="$cpprog"
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd="$stripprog"
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ *) if [ x"$src" = x ]
+ then
+ src=$1
+ else
+ # this colon is to work around a 386BSD /bin/sh bug
+ :
+ dst=$1
+ fi
+ shift
+ continue;;
+ esac
+done
+
+if [ x"$src" = x ]
+then
+ echo "install: no input file specified"
+ exit 1
+else
+ true
+fi
+
+if [ x"$dir_arg" != x ]; then
+ dst=$src
+ src=""
+
+ if [ -d $dst ]; then
+ instcmd=:
+ else
+ instcmd=mkdir
+ fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+ if [ -f $src -o -d $src ]
+ then
+ true
+ else
+ echo "install: $src does not exist"
+ exit 1
+ fi
+
+ if [ x"$dst" = x ]
+ then
+ echo "install: no destination specified"
+ exit 1
+ else
+ true
+ fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+ if [ -d $dst ]
+ then
+ dst="$dst"/`basename $src`
+ else
+ true
+ fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+# this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+ pathcomp="${pathcomp}${1}"
+ shift
+
+ if [ ! -d "${pathcomp}" ] ;
+ then
+ $mkdirprog "${pathcomp}"
+ else
+ true
+ fi
+
+ pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+ $doit $instcmd $dst &&
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+ if [ x"$transformarg" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ dstfile=`basename $dst $transformbasename |
+ sed $transformarg`$transformbasename
+ fi
+
+# don't allow the sed command to completely eliminate the filename
+
+ if [ x"$dstfile" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ true
+ fi
+
+# Make a temp file name in the proper directory.
+
+ dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+ $doit $instcmd $src $dsttmp &&
+
+ trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing. If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+ $doit $rmcmd -f $dstdir/$dstfile &&
+ $doit $mvcmd $dsttmp $dstdir/$dstfile
+
+fi &&
+
+
+exit 0
--- /dev/null
+#! /bin/sh
+
+OS=$OSTYPE
+
+if test "x$OS" = x; then
+ echo "please set the environment variable OSTYPE "
+ echo "to a value appropriate for your system."
+ echo "to do so type: setenv OSTYPE `uname` for the csh, tcsh"
+ echo " export OSTYPE=`uname` for other shells"
+ exit 1
+fi
+
+TMP_CONT=`ls src`
+SRC_DIR=src
+for each in $TMP_CONT; do
+ if test -d src/$each ; then
+ SRC_DIR="$SRC_DIR src/$each"
+ fi
+done
+
+TMP_CONT=`ls samples`
+SAMPLES_DIR=
+for each in $TMP_CONT; do
+ if test -d samples/$each ; then
+ SAMPLES_DIR="$SAMPLES_DIR samples/$each"
+ fi
+done
+
+TMP_CONT=`ls utils`
+UTILS_DIR=
+for each in $TMP_CONT; do
+ if test -d utils/$each ; then
+ UTILS_DIR="$UTILS_DIR utils/$each"
+ fi
+done
+
+TMP_CONT=`ls user`
+USER_DIR=
+for each in $TMP_CONT; do
+ if test -d user/$each ; then
+ USER_DIR="$USER_DIR user/$each"
+ fi
+done
+
+ALL_DIR="$SRC_DIR $SAMPLES_DIR $UTILS_DIR $USER_DIR"
+
+echo Creating for: $OS
+
+# create defaults
+if test ! -d install/unix/setup/$OS; then
+ mkdir install/unix/setup/$OS
+fi
+
+SUBSTFILE=install/unix/setup/$OS/substit
+
+# the substit file first
+if test -f install/unix/setup/substit ; then
+ cat install/unix/setup/substit | sed "s/*/@/g" > $SUBSTFILE;
+ rm -f install/unix/setup/substit
+fi
+# now the template file
+cat install/unix/setup/maketmpl.in | sed -f $SUBSTFILE > install/unix/setup/$OS/maketmpl
+
+# now the config header file
+#if test -f setup/wx_setup.h ; then
+# cat setup/wx_setup.h > setup/$OS/wx_setup.h;
+# rm -f setup/wx_setup.h
+#fi
+
+# create lib and bin directory
+if test ! -d lib; then
+ mkdir lib
+fi
+if test ! -d lib/$OS; then
+ mkdir lib/$OS
+fi
+if test ! -d bin; then
+ mkdir bin
+fi
+if test ! -d bin/$OS; then
+ mkdir bin/$OS
+fi
+
+# create makefiles
+for each in $ALL_DIR; do
+ DIR=$each/$OS
+ # create Makefile in directory
+ if test -r $each/Makefile.in ; then
+ # create directory
+ if test ! -d $DIR; then
+ echo "Creating Directory: $DIR..."
+ mkdir $DIR
+ fi
+ echo "Creating: $DIR/Makefile..."
+ cat $each/Makefile.in | sed -f $SUBSTFILE > $DIR/Makefile
+ (cd $DIR; make subdirs > /dev/null;)
+ fi
+done
--- /dev/null
+#! /bin/sh
+#
+# Written by Martin Sperl
+# (sperl@dsn.ast.univie.ac.at)
+#
+
+
+if test $# -lt 3 ; then
+ cat <<EOF
+Usage: `basename $0` <basedir> <SOURCE-FILES> <DESTINATION-FILS>
+ copies all files from the source-tar-files to the common
+ destination-tar-file with basedir as a common base directory.
+EOF
+ exit 0
+fi
+
+BaseDir="$1"
+shift
+
+Sourcefiles="$1"
+
+while test "$#" != 2 ; do
+ shift
+ Sourcefiles="$Sourcefiles $1"
+done
+
+shift
+Final=$1
+
+Destination=/tmp/join$$.tar
+
+touch $Destination
+
+curdir=`pwd`
+
+mkdir tmp$$
+mkdir tmp$$/$BaseDir
+
+#uncompress all files
+cd tmp$$/$BaseDir
+for each in $Sourcefiles ; do
+ ( \
+ if test `basename $each gz` != `basename $each` ; then \
+ gzip -dc ../../$each;\
+ else \
+ cat ../../$each;\
+ fi; \
+ ) | tar xf -
+done
+cd ..
+#now tar everything
+tar -cf $Destination *
+
+cd ..
+
+rm -fr tmp$$
+
+# goto old directory
+cd $curdir
+
+if test `basename $Final gz` != `basename $Final` ; then
+ gzip -c $Destination > $Final
+else
+ cat $Destination > $Final
+fi
+
+rm -f $Destination
--- /dev/null
+SHELL=/bin/sh
+
+OS=$(OSTYPE)
+
+all::
+ -@if test "x$(OS)" = x; then \
+ echo "please set the environment variable OSTYPE ";\
+ echo "to a value appropriate for your system.";\
+ echo "to do so type: setenv OSTYPE `uname` for the csh, tcsh";\
+ echo " export OSTYPE=`uname` for other shells";\
+ else \
+ if test -f Makefile.in ; then \
+ if test -f $(OS)/Makefile ; then \
+ NEEDED=`(cd $(OS); ${MAKE} checkneeds;) | grep "needed to compile" `;\
+ if test "x$$NEEDED" = x; then \
+ (cd $(OS); ${MAKE} $@); \
+ else \
+ (cd $(OS); ${MAKE} checkneeds); \
+ fi ; \
+ else \
+ echo "Did you configure your system?";\
+ fi; \
+ fi; \
+ fi;
+
+distrib::
+ @if test ! -d ../../distrib ; then mkdir ../../distrib; fi;
+ @if test ! -f ../../system.list ; then \
+ echo "dummy" > ../../system.list;\
+ fi
+ @(curr=`pwd`; direc=`basename $$curr`;\
+ basedir=`dirname $$curr`;\
+ basedirname=`basename $$basedir`;\
+ if test ! -d ../../distrib/$$basedirname ; then \
+ mkdir ../../distrib/$$basedirname;\
+ fi;\
+ if test -d doc; then (cd doc; make clean;); fi;\
+ (cd ..; \
+ echo creating $$direc.tar from the current directory;\
+ files="`\
+ find $$direc -type f \
+ | fgrep -vf ../system.list \
+ | grep -v "~" \
+ | grep -v "#" \
+ ` $(DISTRIBUTE_ADDITIONAL)";\
+ tar -cf /tmp/$$direc.tar $$files;\
+ echo compressing $$direc.tar to $$direc.tgz;\
+ gzip -c /tmp/$$direc.tar > ../distrib/$$basedirname/$$direc.tgz;\
+ rm /tmp/$$direc.tar;\
+ )\
+ )
+
+.DEFAULT:
+ -@if test "x$(OS)" = x; then \
+ echo "please set the environment variable OSTYPE ";\
+ echo "to a value appropriate for your system.";\
+ echo "to do so type: setenv OSTYPE `uname` for the csh, tcsh";\
+ echo " export OSTYPE=`uname` for other shells";\
+ else \
+ if test -f Makefile.in ; then \
+ if test -f $(OS)/Makefile ; then \
+ NEEDED=`(cd $(OS); ${MAKE} checkneeds) | grep "needed to compile" `;\
+ if test "x$$NEEDED" = x; then \
+ (cd $(OS); ${MAKE} $@); \
+ else \
+ (cd $(OS); ${MAKE} checkneeds); \
+ fi ; \
+ else \
+ echo "Did you configure your system?";\
+ fi \
+ fi \
+ fi
+
--- /dev/null
+SHELL=/bin/sh
+
+DIRS=`find . -print | sed "s|\./||g" | grep -v "/" | grep -v "\." `
+
+all:
+ @for i in $(DIRS) xxx; do \
+ if test -r $$i/Makefile ; then \
+ echo "entering directory $$i building $@";\
+ (cd $$i ; ${MAKE} $@); \
+ fi; \
+ done
+
+.DEFAULT:
+ @for i in $(DIRS) xxx; do \
+ if test -r $$i/Makefile ; then \
+ echo "entering directory $$i building $@";\
+ (cd $$i ; ${MAKE} $@); \
+ fi; \
+ done
--- /dev/null
+SHELL=/bin/sh
+
+FILE_BASE=$(TEX_BASE:.tex=)
+
+BMP_FILES=$(XPM_FILES:.xpm=.bmp)
+EPS_FILES=$(XPM_FILES:.xpm=.eps)
+GIF_FILES=$(XPM_FILES:.xpm=.gif)
+
+HTML_BUTTONS=back.gif forward.gif contents.gif up.gif
+
+all:: doc
+
+clean::
+ @ for each in $(DIRS) . ; do \
+ ( cd $$each; \
+ rm -f *.bmp *.eps *.gif *.aux *.dvi *.log \
+ *.ps *.toc *~ *.idx *.hlp *.html \
+ *.rtf *.ref *.xlp *.con *.win *.fts \
+ *.hpj *.HLP; \
+ ); done
+
+doc:: doc_ps doc_html doc_xlp doc_winhelp doc_rtf
+
+#############################################
+
+doc_ps:: $(FILE_BASE).ps
+
+$(FILE_BASE).ps: $(FILE_BASE).dvi
+ dvips $(FILE_BASE).dvi -o$@
+
+#############################################
+
+doc_dvi:: $(FILE_BASE).dvi
+
+$(FILE_BASE).dvi: $(FILE_BASE).tex $(TEX_ADDITIONAL) $(EPS_FILES)
+ latex $(FILE_BASE).tex
+ latex $(FILE_BASE).tex
+
+#############################################
+
+doc_xlp:: $(FILE_BASE).xlp
+
+$(FILE_BASE).xlp: $(FILE_BASE).tex $(TEX_ADDITIONAL)
+ ../../../bin/$(OSTYPE)/tex2rtf $(FILE_BASE).tex $(FILE_BASE).xlp -twice -xlp
+
+#############################################
+
+doc_html:: $(FILE_BASE)_contents.html $(FILE_BASE).html
+
+$(FILE_BASE).html:
+ @ln -s $(FILE_BASE)_contents.html $@
+
+$(FILE_BASE)_contents.html: $(FILE_BASE).tex $(TEX_ADDITIONAL) $(GIF_FILES) $(HTML_BUTTONS)
+ ../../../bin/$(OSTYPE)/tex2rtf $(FILE_BASE).tex $(FILE_BASE) -twice -html
+
+#############################################
+
+doc_rtf:: $(FILE_BASE).rtf
+
+$(FILE_BASE).rtf: $(FILE_BASE).tex $(TEX_ADDITIONAL) $(BMP_FILES)
+ ../../../bin/$(OSTYPE)/tex2rtf $(FILE_BASE).tex $(FILE_BASE).rtf -twice -rtf
+
+#############################################
+
+doc_winhelp:: $(FILE_BASE).win
+
+$(FILE_BASE).win: $(FILE_BASE).tex $(TEX_ADDITIONAL) $(BMP_FILES)
+ ../../../bin/$(OSTYPE)/tex2rtf $(FILE_BASE).tex $(FILE_BASE).win -twice -winhelp
+ @echo final conversion still needs to be done by MSWin
+
+#############################################
+
+subst::
+ @if test "x$(OLD)" = x; then \
+ echo "OLD not defined!"; exit -1; \
+ fi
+ @if test "x$(NEW)" = x; then \
+ echo "NEW not defined!"; exit -1; \
+ fi
+ @for each in $(TEX_BASE) $(TEX_ADITIONAL) ; do \
+ cat $$each | sed "s/$(OLD)/$(NEW)/g" > /tmp/subst; \
+ rm $$each; cp /tmp/subst $$each; rm /tmp/subst; \
+ done
+
+#############################################
+
+.SUFFIXES:
+.SUFFIXES: .eps .xpm
+.SUFFIXES: .bmp .xpm
+.SUFFIXES: .gif .xpm
+
+.xpm.eps :
+ @$(RM) -f $@
+ xpmtoppm $< | ppmtogif | giftopnm | pnmtops -rle -center -noturn -scale 0.5 - > $@
+
+.xpm.bmp :
+ @$(RM) -f $@
+ xpmtoppm $< | ppmtobmp -windows - > $@
+
+.xpm.gif :
+ @$(RM) -f $@
+ xpmtoppm $< | ppmtogif -interlace - > $@
--- /dev/null
+#! /bin/sh
+grep $@
+exit 0
--- /dev/null
+#! /bin/sh
+
+for each in $@ ; do
+ LINE=`grep " $each " ../$OSTYPE/wx_setup.h | grep "#define" | grep 1`
+ if test "x$LINE" = x ; then
+ echo "$each needed to compile";
+ exit 1;
+ fi
+done
+
--- /dev/null
+# Makefile for Autoconf.
+# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+#### Start of system configuration section. ####
+
+GLOBAL_LIB_DIR = $(WXBASEDIR)/lib/$(OS)
+GLOBAL_BIN_DIR = $(WXBASEDIR)/bin/$(OS)
+
+# define toolkit to use
+TOOLKIT_DEF = -D@TOOLKIT_DEF@
+
+# general compiler stuff
+OPTIMISE = @OPTIMISE@
+PROFILE = @PROFILE@
+DEBUG = @WXDEBUG@ @WXDEBUG_DEFINE@
+
+# c-compiler stuff
+CC = @CC@
+CFLAGS = @CFLAGS@ $(OPTIMISE) $(PROFILE) $(DEBUG)
+CPP = @CPP@
+
+# c++-compiler stuff
+CXX = @CXX@
+CXXFLAGS = @CXXFLAGS@ $(OPTIMISE) $(PROFILE) $(DEBUG)
+CXXCPP = @CXXCPP@
+
+# shared compile stuff
+PICFLAGS = @PICFLAGS@
+CREATE_SHARED = @CREATE_SHARED@
+
+# other stuff
+RM = rm -f
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+YACC = @YACC@
+RANLIB = @RANLIB@
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+AWK = @AWK@
+LN_S = @LN_S@
+CJPEG_PROG =
+CONVERT_PATH = /usr/bin/X11
+CONVERT_PROG = /usr/bin/X11/convert
+DJPEG_PROG =
+GIFTOPNM_PROG =
+NETPBM_PATH =
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+# Directory in which to install scripts.
+#bindir = @bindir@
+
+# Directory in which to install library files.
+datadir = @datadir@
+acdatadir = $(datadir)/autoconf
+
+# Directory in which to install documentation info files.
+infodir = @infodir@
+
+X_CFLAGS = @X_CFLAGS@
+X_LIBS = @X_LIBS@
+X_EXTRA_LIBS = @X_EXTRA_LIBS@
+X_PRE_LIBS = @X_PRE_LIBS@
+
+GUI_TK_INCLUDE = @GUI_TK_INCLUDE@
+GUI_TK_LIBRARY = @GUI_TK_LIBRARY@
+GUI_TK_LINK = @GUI_TK_LINK@
+
+OPENGL_INCLUDE = @OPENGL_INCLUDE@
+OPENGL_LIBRARY = @OPENGL_LIBRARY@
+OPENGL_LINK = @OPENGL_LINK@
+
+THREADS_LINK = @THREADS_LINK@
+
+# INCLUDES
+WX_INCLUDES = \
+$(TOOLKIT_DEF) \
+-I. \
+-I.. \
+-I$(WXBASEDIR)/include \
+-I$(WXBASEDIR)/src/zlib \
+$(GUI_TK_INCLUDE) \
+$(OPENGL_INCLUDE) \
+$(X_CFLAGS)
+
+# -I$(WXBASEDIR)/src/png \
+# -I$(WXBASEDIR)/src/zlib \
+# -I$(WXBASEDIR)/src/gdk_imlib \
+
+WX_LIBS = -L$(GLOBAL_LIB_DIR) -lwx_gtk
+
+OPENGL_LIBS = $(OPENGL_LIBRARY) $(OPENGL_LINK)
+
+GUI_TK_LIBS = $(GUI_TK_LIBRARY) $(GUI_TK_LINK) -ldl
+
+LINK = $(CXX) -o $@
+LINK_LIBS= \
+ $(WX_LIBS) \
+ $(GUI_TK_LIBS) \
+ $(X_EXTRA_LIBS) \
+ $(X_PRE_LIBS) \
+ $(THREADS_LINK)
+
+# Don't include $(OPENGL_LIBS) in LINK_LIBS; they
+# can be conveniently added to BIN_LINK in Makefile.in.
+
+#### End of system configuration section. ####
--- /dev/null
+# all that is to do
+all:: checkneeds binary
+clean:: clean_binary clean_obj
+
+# now include definite rules
+BIN_BASE_DIR=.
+
+# include rules to create library
+include $(RULES_GENERIC)/bin1
+# include rules to create objects
+include $(RULES_GENERIC)/obj
+# include rule to check for defines needed
+include $(RULES_GENERIC)/needed
--- /dev/null
+# all that is to do
+all:: checkneeds binary
+clean:: clean_binary clean_obj
+
+# now include definite rules
+BIN_BASE_DIR=.
+
+# include rules to create library
+include $(RULES_GENERIC)/bin2
+# include rules to create objects
+include $(RULES_GENERIC)/obj
+# include rule to check for defines needed
+include $(RULES_GENERIC)/needed
+
--- /dev/null
+SHELL=/bin/sh
+
+FILE_BASE=$(TEX_BASE:.tex=)
+
+BMP_FILES=$(XPM_FILES:.xpm=.bmp)
+EPS_FILES=$(XPM_FILES:.xpm=.eps)
+GIF_FILES=$(XPM_FILES:.xpm=.gif)
+
+TEX2RTF=$(WXBASEDIR)/bin/$(OSTYPE)/tex2rtf
+
+HTML_BUTTONS=back.gif forward.gif contents.gif up.gif
+
+all:: doc
+
+clean::
+ @ for each in $(DIRS) . ; do \
+ ( cd $$each; \
+ rm -f *.bmp *.eps *.gif *.aux *.dvi *.log \
+ *.ps *.toc *~ *.idx *.hlp *.html \
+ *.rtf *.ref *.xlp *.con *.win *.fts \
+ *.hpj *.HLP; \
+ ); done
+
+doc:: doc_ps doc_html doc_xlp doc_winhelp doc_rtf
+
+#############################################
+
+doc_ps:: $(FILE_BASE).ps
+
+$(FILE_BASE).ps: $(FILE_BASE).dvi
+ dvips $(FILE_BASE).dvi -o$@
+
+#############################################
+
+doc_dvi:: $(FILE_BASE).dvi
+
+$(FILE_BASE).dvi: $(FILE_BASE).tex $(TEX_ADDITIONAL) $(EPS_FILES)
+ latex $(FILE_BASE).tex
+ latex $(FILE_BASE).tex
+
+#############################################
+
+doc_xlp:: $(FILE_BASE).xlp
+
+$(FILE_BASE).xlp: $(FILE_BASE).tex $(TEX_ADDITIONAL)
+ $(TEX2RTF) $(FILE_BASE).tex $(FILE_BASE).xlp -twice -xlp
+
+#############################################
+
+doc_html:: $(FILE_BASE)_contents.html $(FILE_BASE).html
+
+$(FILE_BASE).html:
+ @ln -s $(FILE_BASE)_contents.html $@
+
+$(FILE_BASE)_contents.html: $(FILE_BASE).tex $(TEX_ADDITIONAL) $(GIF_FILES) $(HTML_BUTTONS)
+ $(TEX2RTF) $(FILE_BASE).tex $(FILE_BASE) -twice -html
+
+#############################################
+
+doc_rtf:: $(FILE_BASE).rtf
+
+$(FILE_BASE).rtf: $(FILE_BASE).tex $(TEX_ADDITIONAL) $(BMP_FILES)
+ $(TEX2RTF) $(FILE_BASE).tex $(FILE_BASE).rtf -twice -rtf
+
+#############################################
+
+doc_winhelp:: $(FILE_BASE).win
+
+$(FILE_BASE).win: $(FILE_BASE).tex $(TEX_ADDITIONAL) $(BMP_FILES)
+ ../../../bin/$(OSTYPE)/tex2rtf $(FILE_BASE).tex $(FILE_BASE).win -twice -winhelp
+ @echo final conversion still needs to be done by MSWin
+
+#############################################
+
+.SUFFIXES:
+.SUFFIXES: .eps .xpm
+.SUFFIXES: .bmp .xpm
+.SUFFIXES: .gif .xpm
+
+.xpm.eps :
+ @$(RM) -f $@
+ xpmtoppm $< | ppmtogif | giftopnm | pnmtops -rle -center -noturn -scale 0.5 - > $@
+
+.xpm.bmp :
+ @$(RM) -f $@
+ xpmtoppm $< | ppmtobmp -windows - > $@
+
+.xpm.gif :
+ @$(RM) -f $@
+ xpmtoppm $< | ppmtogif -interlace - > $@
--- /dev/null
+# all that is to do
+all:: checkneeds binary
+clean:: clean_binary clean_obj
+
+# now include definite rules
+BIN_BASE_DIR=$(GLOBAL_BIN_DIR)
+
+# include rules to create library
+include $(RULES_GENERIC)/bin1
+# include rules to create objects
+include $(RULES_GENERIC)/obj
+# include rule to check for defines needed
+include $(RULES_GENERIC)/needed
+
--- /dev/null
+# all that is to do
+all:: checkneeds binary
+clean:: clean_binary clean_obj
+
+# now include definite rules
+BIN_BASE_DIR=$(GLOBAL_BIN_DIR)
+
+# include rules to create library
+include $(RULES_GENERIC)/bin2
+# include rules to create objects
+include $(RULES_GENERIC)/mkobj
+# include rule to check for defines needed
+include $(RULES_GENERIC)/needed
+
--- /dev/null
+binary:: binary1
+
+depend_binary:: depend_binary1
+
+clean_binary:: clean_binary1
+
+include $(RULES_GENERIC)/bin1gen
+
--- /dev/null
+# create binary
+
+binary1:: $(BIN_BASE_DIR)/$(BIN_TARGET)
+
+$(BIN_BASE_DIR)/$(BIN_TARGET): $(BIN_OBJ)
+ @$(RM) -f $@
+ $(LINK) $(BIN_OBJ) -L. $(BIN_LINK) $(LINK_LIBS)
+
+# defining dependencies
+
+depend_binary1::
+
+# cleaning all files
+
+clean_binary1::
+ @$(RM) -f $(BIN_BASE_DIR)/$(BIN_TARGET)
--- /dev/null
+binary:: binary1 binary2
+
+depend_binary:: depend_binary1 depend_binary2
+
+clean_binary:: clean_binary1 clean_binary2
+
+include $(RULES_GENERIC)/bin1gen
+include $(RULES_GENERIC)/bin2gen
+
--- /dev/null
+# create binary
+
+binary2:: $(BIN_BASE_DIR)/$(BIN2_TARGET)
+
+$(BIN_BASE_DIR)/$(BIN2_TARGET): $(BIN2_OBJ)
+ @$(RM) -f $@
+ $(LINK) $(BIN2_OBJ) -L. $(BIN2_LINK) $(LINK_LIBS)
+
+# defining dependencies
+
+depend_binary2::
+
+# cleaning all files
+
+clean_binary2::
+ @$(RM) -f $(BIN_BASE_DIR)/$(BIN2_TARGET)
--- /dev/null
+depend::
+ @echo "$(CXX) -MM \
+ $(WX_INCLUDES) \
+ $(ADD_COMPILE) \
+ $(LIB_SRC) $(BIN_SRC) $(BIN2_SRC)"
+ @(cd .. ;\
+ $(CXX) -MM \
+ $(WX_INCLUDES) \
+ $(ADD_COMPILE) \
+ $(LIB_SRC) $(BIN_SRC) $(BIN2_SRC)\
+ ) > .depend
+ @cp Makefile Makefile.bak
+ @cat Makefile.bak | awk 'BEGIN { found=0;} { if ( $$0 == "# DO NOT DELETE") {found=1} ; { if ( found==0 ) { print $$0; } } }' > Makefile1
+ @echo "# DO NOT DELETE" >> Makefile1
+ @cat .depend >> Makefile1
+ @mv Makefile1 Makefile
+ @rm .depend
+
--- /dev/null
+# creates subdirectories for object-files in case they are needed...
+
+subdirs::
+ @if test "x$(SRC_DIR)" != x ; then \
+ echo -n "Creating necessary subdirs: "; \
+ for each in $(SRC_DIR) xxx; do \
+ if test "x$$each" != xxxx; then \
+ echo -n "$$each "; \
+ if test ! -d $$each ; then \
+ mkdir $$each ; \
+ fi; \
+ fi; \
+ done; \
+ echo "";\
+ fi
--- /dev/null
+# create library
+
+library:: $(LIB_BASE_DIR)/lib$(LIB_TARGET).a
+
+$(LIB_BASE_DIR)/lib$(LIB_TARGET).a: $(LIB_OBJ)
+ @$(RM) -f $@
+ $(AR) rv $@ $(LIB_OBJ)
+
+# defining dependencies
+
+depend_library::
+
+# cleaning all files
+
+clean_library::
+ @$(RM) -f $(LIB_BASE_DIR)/lib$(LIB_TARGET).a
+
--- /dev/null
+#SHELL=/bin/sh
+MYGREP=$(WXBASEDIR)/setup/general/mygrep
+checkneeds::
+ @if test "x$(NEEDED_DEFINES)" != x ; then \
+ RESULT=0 ; \
+ for each in $(NEEDED_DEFINES) xxx; do \
+ if test "$$each" != xxx ; then \
+ LINE=`cat $(SETUP_DIR)/wx_setup.h \
+ | sed "s/ /,/g" \
+ | $(MYGREP) ",$$each," \
+ | $(MYGREP) "#define" \
+ | $(MYGREP) "1" ` ; \
+ if test "x$$LINE" = x ; then \
+ (TMPVAR=`pwd`;\
+ TMPVAR=`dirname $$TMPVAR`;\
+ echo "$$each needed to compile "`basename $$TMPVAR`"...";\
+ );\
+ RESULT=1 ; \
+ fi; \
+ fi; \
+ done ;\
+ exit $$RESULT; \
+ fi
+
--- /dev/null
+.SUFFIXES:
+.SUFFIXES: .o .c
+.SUFFIXES: .o .cc
+.SUFFIXES: .o .cpp
+
+VPATH= ..
+
+.c.o :
+ @$(RM) -f $@
+ $(CC) -c -o $@ $(CFLAGS) -I.. $(WX_INCLUDES) $(ADD_COMPILE) $(WX_DEFINES) $<
+
+.cc.o :
+ @$(RM) -f $@
+ $(CXX) -c -o $@ $(CXXFLAGS) -I.. $(WX_INCLUDES) $(ADD_COMPILE) $(WX_DEFINES) $<
+
+.cpp.o :
+ @$(RM) -f $@
+ $(CXX) -c -o $@ $(CXXFLAGS) -I.. $(WX_INCLUDES) $(ADD_COMPILE) $(WX_DEFINES) $<
+
+clean_obj::
+ @$(RM) *.o *.osh
+ @if test "x$(SRC_DIR)" != x ; then \
+ for each in $(SRC_DIR) xxx; do \
+ if test -d $$each ; then \
+ $(RM) $$each/*.o $$each/*.osh ; \
+ fi; \
+ done; \
+ fi;
+
+include $(RULES_GENERIC)/depend
--- /dev/null
+# create library
+
+library:: $(LIB_BASE_DIR)/lib$(LIB_TARGET).a
+
+$(LIB_BASE_DIR)/lib$(LIB_TARGET).a: $(LIB_OBJ)
+ @$(RM) -f $@ $(LIB_BASE_DIR)/lib$(LIB_TARGET).so $(LIB_BASE_DIR)/lib$(LIB_TARGET).so.*
+ @if test "x$(CREATE_SHARED)" != x; then\
+ echo "$(SHARE_DIR)/$(CREATE_SHARED) $(CC) $(LIB_BASE_DIR)/lib$(LIB_TARGET).so $(LIB_MAJOR) $(LIB_MINOR) $(LIB_OBJ)"; \
+ $(SHARE_DIR)/$(CREATE_SHARED) $(CC) $(LIB_BASE_DIR)/lib$(LIB_TARGET).so $(LIB_MAJOR) $(LIB_MINOR) $(LIB_OBJ); \
+ fi
+ $(AR) rv $@ $(LIB_OBJ)
+
+# defining dependencies
+
+depend_library::
+
+# cleaning all files
+
+clean_library::
+ @$(RM) -f $(LIB_BASE_DIR)/lib$(LIB_TARGET).a $(LIB_BASE_DIR)/lib$(LIB_TARGET).so.* $(LIB_BASE_DIR)/lib$(LIB_TARGET).so
+
--- /dev/null
+.SUFFIXES:
+.SUFFIXES: .o .c
+.SUFFIXES: .o .cc
+.SUFFIXES: .o .cpp
+
+VPATH= ..
+
+.c.o :
+ @$(RM) -f $@ $@sh
+ @if test "x$(PICFLAGS)" != x; then \
+ echo "$(CC) -c -o $@sh $(PICFLAGS) $(CFLAGS) -I.. $(WX_INCLUDES) $(ADD_COMPILE) $(WX_DEFINES) $<";\
+ $(CC) -c -o $@sh $(PICFLAGS) $(CFLAGS) -I.. $(WX_INCLUDES) $(ADD_COMPILE) $(WX_DEFINES) $<;\
+ fi
+ $(CC) -c -o $@ $(CFLAGS) -I.. $(WX_INCLUDES) $(ADD_COMPILE) $(WX_DEFINES) $<
+
+.cc.o :
+ @$(RM) -f $@ $@sh
+ @if test "x$(PICFLAGS)" != x; then \
+ echo "$(CXX) -c -o $@sh $(PICFLAGS) $(CXXFLAGS) -I.. $(WX_INCLUDES) $(ADD_COMPILE) $(WX_DEFINES) $<";\
+ $(CXX) -c -o $@sh $(PICFLAGS) $(CXXFLAGS) -I.. $(WX_INCLUDES) $(ADD_COMPILE) $(WX_DEFINES) $<;\
+ fi
+ $(CXX) -c -o $@ $(CXXFLAGS) -I.. $(WX_INCLUDES) $(ADD_COMPILE) $(WX_DEFINES) $<
+
+.cpp.o :
+ @$(RM) -f $@ $@sh
+ @if test "x$(PICFLAGS)" != x; then \
+ echo "$(CXX) -c -o $@sh $(PICFLAGS) $(CXXFLAGS) -I.. $(WX_INCLUDES) $(ADD_COMPILE) $(WX_DEFINES) $<";\
+ $(CXX) -c -o $@sh $(PICFLAGS) $(CXXFLAGS) -I.. $(WX_INCLUDES) $(ADD_COMPILE) $(WX_DEFINES) $<;\
+ fi
+ $(CXX) -c -o $@ $(CXXFLAGS) -I.. $(WX_INCLUDES) $(ADD_COMPILE) $(WX_DEFINES) $<
+
+clean_obj::
+ @$(RM) *.o *.osh
+ @if test "x$(SRC_DIR)" != x ; then \
+ for each in $(SRC_DIR) xxx; do \
+ if test -d $$each ; then \
+ $(RM) $$each/*.o $$each/*.osh ; \
+ fi; \
+ done; \
+ fi;
+
+include $(RULES_GENERIC)/depend
--- /dev/null
+# all that is to do
+all:: checkneeds library
+clean:: clean_library clean_obj
+
+# now include definite rules
+LIB_BASE_DIR=$(GLOBAL_LIB_DIR)
+
+# include rules to create library
+include $(RULES_GENERIC)/lib
+# include rules to create objects
+include $(RULES_GENERIC)/obj
+# include rule to check for defines needed
+include $(RULES_GENERIC)/needed
+
+
--- /dev/null
+# all that is to do
+all:: checkneeds library binary
+clean:: clean_library clean_obj clean_binary
+
+# now include definite rules
+LIB_BASE_DIR=$(GLOBAL_LIB_DIR)
+BIN_BASE_DIR=.
+
+# include rules to create library
+include $(RULES_GENERIC)/lib
+# include rules to create binary
+include $(RULES_GENERIC)/bin1
+# include rules to create objects
+include $(RULES_GENERIC)/obj
+# include rule to check for defines needed
+include $(RULES_GENERIC)/needed
+
--- /dev/null
+# all that is to do
+all:: checkneeds library binary
+depend:: depend_library depend_binary
+clean:: clean_library clean_obj clean_binary
+
+# now include definite rules
+LIB_BASE_DIR=$(GLOBAL_LIB_DIR)
+BIN_BASE_DIR=$(GLOBAL_BIN_DIR)
+
+# include rules to create library
+include $(RULES_GENERIC)/lib
+# include rules to create binary
+include $(RULES_GENERIC)/mkbin1
+# include rules to create objects
+include $(RULES_GENERIC)/obj
+# include rule to check for defines needed
+include $(RULES_GENERIC)/needed
+
--- /dev/null
+# all that is to do
+all:: checkneeds library
+clean:: clean_library clean_obj
+
+# now include definite rules
+LIB_BASE_DIR=$(GLOBAL_LIB_DIR)
+
+# include rules to create shared library
+include $(RULES_GENERIC)/slib
+# include rules to create shared objects
+include $(RULES_GENERIC)/sobj
+# include rule to check for defines needed
+include $(RULES_GENERIC)/needed
+
+
--- /dev/null
+# all that is to do
+all:: checkneeds library
+clean:: clean_library clean_obj
+
+# now include definite rules
+LIB_BASE_DIR=.
+
+# include rules to create library
+include $(RULES_GENERIC)/lib
+# include rules to create objects
+include $(RULES_GENERIC)/obj
+# include rule to check for defines needed
+include $(RULES_GENERIC)/needed
+
--- /dev/null
+# all that is to do
+all:: checkneeds library binary
+clean:: clean_library clean_obj clean_binary
+
+# now include definite rules
+LIB_BASE_DIR=.
+BIN_BASE_DIR=.
+
+# include rules to create library
+include $(RULES_GENERIC)/lib
+# include rules to create binary
+include $(RULES_GENERIC)/bin1
+# include rules to create objects
+include $(RULES_GENERIC)/obj
+# include rule to check for defines needed
+include $(RULES_GENERIC)/needed
+
--- /dev/null
+# all that is to do
+all:: checkneeds library binary
+clean:: clean_library clean_obj clean_binary
+
+# now include definite rules
+LIB_BASE_DIR=.
+BIN_BASE_DIR=$(GLOBAL_BIN_DIR)
+
+# include rules to create library
+include $(RULES_GENERIC)/lib
+# include rules to create binary
+include $(RULES_GENERIC)/mkbin1
+# include rules to create objects
+include $(RULES_GENERIC)/obj
+# include rule to check for defines needed
+include $(RULES_GENERIC)/needed
+
--- /dev/null
+/* wx_setup.h
+ This file is in the public domain.
+
+ Descriptive text for the C preprocessor macros that
+ the distributed Autoconf macros can define.
+ No software package will use all of them; autoheader copies the ones
+ your configure.in uses into your configuration header file templates.
+
+ The entries are in sort -df order: alphabetical, case insensitive,
+ ignoring punctuation (such as underscores). Although this order
+ can split up related entries, it makes it easier to check whether
+ a given entry is in the file.
+
+ Leave the following blank line there!! Autoheader needs it. */
+\f
+#ifndef __GTKSETUPH__
+#define __GTKSETUPH__
+
+#ifdef __GNUG__
+#pragma interface
+#endif
+
+/* define the system to compile */
+#undef __WXGTK__
+#undef __UNIX__
+#undef __LINUX__
+#undef __SGI__
+#undef __HPUX__
+#undef __SYSV__
+#undef __SVR4__
+#undef __AIX__
+#undef __SUN__
+#undef __SOLARIS__
+#undef __SUNOS__
+#undef __ALPHA__
+#undef __OSF__
+#undef __BSD__
+#undef __FREEBSD__
+#undef __VMS__
+#undef __ULTRIX__
+#undef __DATA_GENERAL__
+
+/*
+ * Use zlib
+ */
+#undef USE_ZLIB
+/*
+ * Use gdk_imlib
+ */
+#undef USE_GDK_IMLIB
+/*
+ * Use libpng
+ */
+#undef USE_LIBPNG
+/*
+ * Use iODBC
+ */
+#undef USE_ODBC
+/*
+ * Use Threads
+ */
+#undef USE_THREADS
+/*
+ * Use storable classes
+ */
+#undef USE_STORABLE_CLASSES
+/*
+ * Use automatic translation via gettext() in wxTString
+ */
+#undef USE_AUTOTRANS
+/*
+ * Use font metric files in GetTextExtent for wxPostScriptDC
+ * Use consistent PostScript fonts for AFM and printing (!)
+ */
+#undef USE_AFM_FOR_POSTSCRIPT
+#undef WX_NORMALIZED_PS_FONTS
+/*
+ * Use clipboard
+ */
+#undef USE_CLIPBOARD
+/*
+ * Use wxWindows layout constraint system
+ */
+#undef USE_CONSTRAINTS
+/*
+ * Use the document/view architecture
+ */
+#undef USE_DOC_VIEW_ARCHITECTURE
+/*
+ * Use enhanced dialog
+ */
+#undef USE_ENHANCED_DIALOG
+/*
+ * Use Form panel item placement
+ */
+#undef USE_FORM
+/*
+ * Use fraction class
+ */
+#undef USE_FRACTION
+/*
+ * Use gauge item
+ */
+#undef USE_GAUGE
+/*
+ * Implement a GLCanvas class as an interface to OpenGL, using the GLX
+ * extension to the X11 protocol. You can use the (free) Mesa library
+ * if you don't have a 'real' OpenGL.
+ */
+#undef USE_GLX
+/*
+ * Use wxWindows help facility (needs USE_IPC 1)
+ */
+#undef USE_HELP
+/*
+ * Use iostream.h rather than iostream
+ */
+#undef USE_IOSTREAMH
+/*
+ * Use Interprocess communication
+ */
+#undef USE_IPC
+/*
+ * Use Metafile and Metafile device context
+ */
+#undef USE_METAFILE
+/*
+ * Use PostScript device context
+ */
+#undef USE_POSTSCRIPT
+/*
+ * Use wxConfig system
+ */
+#undef USE_WXCONFIG
+/*
+ * Use the print/preview architecture
+ */
+#undef USE_PRINTING_ARCHITECTURE
+/*
+ * Use Prolog IO
+ */
+#undef USE_PROLOGIO
+/*
+ * Use Remote Procedure Call (Needs USE_IPC and USE_PROLOGIO)
+ */
+#undef USE_RPC
+/*
+ * Use wxGetResource & wxWriteResource (change .Xdefaults)
+ */
+#undef USE_RESOURCES
+/*
+ * Use scrollbar item
+ */
+#undef USE_SCROLLBAR
+/*
+ * Use time and date classes
+ */
+#undef USE_TIMEDATE
+/*
+ * Use toolbar, use Xt port toolbar (3D look)
+ */
+#undef USE_TOOLBAR
+#undef USE_XT_TOOLBAR
+/*
+ * Enables old type checking mechanism (wxSubType)
+ */
+#undef USE_TYPETREE
+/*
+ * Use virtual list box item
+ */
+#undef USE_VLBOX
+/*
+ * Use wxWindows resource loading (.wxr-files) (Needs USE_PROLOGIO 1)
+ */
+#undef USE_WX_RESOURCES
+/*
+ * Use wxGraph
+ */
+#undef USE_WXGRAPH
+/*
+ * Use wxTree
+ */
+/*
+ * Use Apple Ieee-double converter
+ */
+#undef USE_APPLE_IEEE
+
+/********************** DO NOT CHANGE BELOW THIS POINT **********************/
+
+/**************************** WXDEBUGGING FEATURES ****************************/
+
+/* Compatibility with 1.66 API.
+ Level 0: no backward compatibility, all new features
+ Level 1: wxDC, OnSize (etc.) compatibility, but
+ some new features such as event tables */
+#define WXWIN_COMPATIBILITY 1
+/*
+ * Enables debugging: memory tracing, assert, etc., contains debug level
+ */
+#undef WXDEBUG
+/*
+ * Enables debugging version of wxObject::new and wxObject::delete (IF WXDEBUG)
+ * WARNING: this code may not work with all architectures, especially
+ * if alignment is an issue.
+ */
+#undef USE_MEMORY_TRACING
+/*
+ * Enable debugging version of global memory operators new and delete
+ * Disable it, If this causes problems (e.g. link errors)
+ */
+#undef USE_GLOBAL_MEMORY_OPERATORS
+/*
+ * If WXDEBUG && USE_MEMORY_TRACING && USE_GLOBAL_MEMORY_OPERATORS
+ * used to debug the memory allocation of wxWindows Xt port code
+ */
+#define USE_INTERNAL_MEMORY_TRACING 0
+/*
+ * Matthews garbage collection (used for MrEd?)
+ */
+#define WXGARBAGE_COLLECTION_ON 0
+
+/**************************** COMPILER FEATURES *****************************/
+
+/*
+ * Disable this if your compiler can't cope
+ * with omission of prototype parameters.
+ */
+#define REMOVE_UNUSED_ARG 1
+/*
+ * The const keyword is being introduced more in wxWindows.
+ * You can use this setting to maintain backward compatibility.
+ * If 0: will use const wherever possible.
+ * If 1: will use const only where necessary
+ * for precompiled headers to work.
+ * If 2: will be totally backward compatible, but precompiled
+ * headers may not work and program size will be larger.
+ */
+#define CONST_COMPATIBILITY 0
+
+/************************ WINDOWS 3.1 COMPATIBILITY *************************/
+
+/*
+ * Normalize X drawing code to behave exactly as MSW.
+ */
+#define WX_STANDARD_GRAPHICS 0
+
+/******************* other stuff **********************************/
+/*
+ * Support image loading for wxBitmap (wxImage is needed for this)
+ */
+#define USE_IMAGE_LOADING 0
+#define WXIMAGE_INCLUDE "../../utils/image/src/wx_image.h"
+/*
+ * Use splines
+ */
+#define USE_SPLINES 1
+
+/*
+ * USE_DYNAMIC_CLASSES is TRUE for the Xt port
+ */
+#define USE_DYNAMIC_CLASSES 1
+/*
+ * USE_EXTENDED_STATICS is FALSE for the Xt port
+*/
+#define USE_EXTENDED_STATICS 0
+
+/*************************** IMAKEFILE EVALUATIOS ***************************/
+
+#if USE_XPM
+ #define USE_XPM_IN_X 1
+#else
+ #define USE_XPM_IN_X 0
+#endif
+#if USE_IMAGE_LOADING
+ #define USE_IMAGE_LOADING_IN_X 1
+#else
+ #define USE_IMAGE_LOADING_IN_X 0
+#endif
+
+/* here comes the system-specific stuff */
+
+/* acconfig.h
+ This file is in the public domain.
+
+ Descriptive text for the C preprocessor macros that
+ the distributed Autoconf macros can define.
+ No software package will use all of them; autoheader copies the ones
+ your configure.in uses into your configuration header file templates.
+
+ The entries are in sort -df order: alphabetical, case insensitive,
+ ignoring punctuation (such as underscores). Although this order
+ can split up related entries, it makes it easier to check whether
+ a given entry is in the file. */
+
+/* Define if on AIX 3.
+ System headers sometimes define this.
+ We just want to avoid a redefinition error message. */
+#ifndef _ALL_SOURCE
+#undef _ALL_SOURCE
+#endif
+
+/* Define if using alloca.c. */
+#undef C_ALLOCA
+
+/* Define if type char is unsigned and you are not using gcc. */
+#ifndef __CHAR_UNSIGNED__
+#undef __CHAR_UNSIGNED__
+#endif
+
+/* Define if the closedir function returns void instead of int. */
+#undef CLOSEDIR_VOID
+
+/* Define to empty if the keyword does not work. */
+#undef const
+
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+ This function is required for alloca.c support on those systems. */
+#undef CRAY_STACKSEG_END
+
+/* Define for DGUX with <sys/dg_sys_info.h>. */
+#undef DGUX
+
+/* Define if you have <dirent.h>. */
+#undef DIRENT
+
+/* Define to the type of elements in the array set by `getgroups'.
+ Usually this is either `int' or `gid_t'. */
+#undef GETGROUPS_T
+
+/* Define if the `getloadavg' function needs to be run setuid or setgid. */
+#undef GETLOADAVG_PRIVILEGED
+
+/* Define if the `getpgrp' function takes no argument. */
+#undef GETPGRP_VOID
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef gid_t
+
+/* Define if you have alloca, as a function or macro. */
+#undef HAVE_ALLOCA
+
+/* Define if you have <alloca.h> and it should be used (not on Ultrix). */
+#undef HAVE_ALLOCA_H
+
+/* Define if you don't have vprintf but do have _doprnt. */
+#undef HAVE_DOPRNT
+
+/* Define if your system has its own `getloadavg' function. */
+#undef HAVE_GETLOADAVG
+
+/* Define if you have the getmntent function. */
+#undef HAVE_GETMNTENT
+
+/* Define if the `long double' type works. */
+#undef HAVE_LONG_DOUBLE
+
+/* Define if you support file names longer than 14 characters. */
+#undef HAVE_LONG_FILE_NAMES
+
+/* Define if you have a working `mmap' system call. */
+#undef HAVE_MMAP
+
+/* Define if system calls automatically restart after interruption
+ by a signal. */
+#undef HAVE_RESTARTABLE_SYSCALLS
+
+/* Define if your struct stat has st_blksize. */
+#undef HAVE_ST_BLKSIZE
+
+/* Define if your struct stat has st_blocks. */
+#undef HAVE_ST_BLOCKS
+
+/* Define if you have the strcoll function and it is properly defined. */
+#undef HAVE_STRCOLL
+
+/* Define if your struct stat has st_rdev. */
+#undef HAVE_ST_RDEV
+
+/* Define if you have the strftime function. */
+#undef HAVE_STRFTIME
+
+/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define if your struct tm has tm_zone. */
+#undef HAVE_TM_ZONE
+
+/* Define if you don't have tm_zone but do have the external array
+ tzname. */
+#undef HAVE_TZNAME
+
+/* Define if you have <unistd.h>. */
+#undef HAVE_UNISTD_H
+
+/* Define if utime(file, NULL) sets file's timestamp to the present. */
+#undef HAVE_UTIME_NULL
+
+/* Define if you have <vfork.h>. */
+#undef HAVE_VFORK_H
+
+/* Define if you have the vprintf function. */
+#undef HAVE_VPRINTF
+
+/* Define if you have the wait3 system call. */
+#undef HAVE_WAIT3
+
+/* Define as __inline if that's what the C compiler calls it. */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define if major, minor, and makedev are declared in <mkdev.h>. */
+#undef MAJOR_IN_MKDEV
+
+/* Define if major, minor, and makedev are declared in <sysmacros.h>. */
+#undef MAJOR_IN_SYSMACROS
+
+/* Define if on MINIX. */
+#undef _MINIX
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef mode_t
+
+/* Define if you don't have <dirent.h>, but have <ndir.h>. */
+#undef NDIR
+
+/* Define if you have <memory.h>, and <string.h> doesn't declare the
+ mem* functions. */
+#undef NEED_MEMORY_H
+
+/* Define if your struct nlist has an n_un member. */
+#undef NLIST_NAME_UNION
+
+/* Define if you have <nlist.h>. */
+#undef NLIST_STRUCT
+
+/* Define if your C compiler doesn't accept -c and -o together. */
+#undef NO_MINUS_C_MINUS_O
+
+/* Define to `long' if <sys/types.h> doesn't define. */
+#undef off_t
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef pid_t
+
+/* Define if the system does not provide POSIX.1 features except
+ with this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define if you need to in order for stat and other things to work. */
+#undef _POSIX_SOURCE
+
+/* Define as the return type of signal handlers (int or void). */
+#undef RETSIGTYPE
+
+/* Define if the setvbuf function takes the buffering type as its second
+ argument and the buffer pointer as the third, as on System V
+ before release 3. */
+#undef SETVBUF_REVERSED
+
+/* Define SIZESOF for some Objects */
+#undef SIZEOF_INT
+#undef SIZEOF_INT_P
+#undef SIZEOF_LONG
+
+/* Define to `unsigned' if <sys/types.h> doesn't define. */
+#undef size_t
+
+/* If using the C implementation of alloca, define if you know the
+ direction of stack growth for your system; otherwise it will be
+ automatically deduced at run-time.
+ STACK_DIRECTION > 0 => grows toward higher addresses
+ STACK_DIRECTION < 0 => grows toward lower addresses
+ STACK_DIRECTION = 0 => direction of growth unknown
+ */
+#undef STACK_DIRECTION
+
+/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly. */
+#undef STAT_MACROS_BROKEN
+
+/* Define if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define on System V Release 4. */
+#undef SVR4
+
+/* Define on BSD */
+#undef BSD
+
+/* Define on System V */
+#undef SYSV
+
+/* Define if you don't have <dirent.h>, but have <sys/dir.h>. */
+#undef SYSDIR
+
+/* Define if you don't have <dirent.h>, but have <sys/ndir.h>. */
+#undef SYSNDIR
+
+/* Define if `sys_siglist' is declared by <signal.h>. */
+#undef SYS_SIGLIST_DECLARED
+
+/* Define if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Define if your <sys/time.h> declares struct tm. */
+#undef TM_IN_SYS_TIME
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef uid_t
+
+/* Define for Encore UMAX. */
+#undef UMAX
+
+/* Define for Encore UMAX 4.3 that has <inq_status/cpustats.h>
+ instead of <sys/cpustats.h>. */
+#undef UMAX4_3
+
+/* Define if you do not have <strings.h>, index, bzero, etc.. */
+#undef USG
+
+/* Define if the system is System V Release 4 */
+#undef SVR4
+
+/* Define vfork as fork if vfork does not work. */
+#undef vfork
+
+/* Define if the closedir function returns void instead of int. */
+#undef VOID_CLOSEDIR
+
+/* Define if your processor stores words with the most significant
+ byte first (like Motorola and SPARC, unlike Intel and VAX). */
+#undef WORDS_BIGENDIAN
+
+/* Define if lex declares yytext as a char * by default, not a char[]. */
+#undef YYTEXT_POINTER
+
+#endif /* __GTKSETUPH__ */
+
+\f
+/* Leave that blank line there!! Autoheader needs it.
+ If you're adding to this file, keep in mind:
+ The entries are in sort -df order: alphabetical, case insensitive,
+ ignoring punctuation (such as underscores). */
--- /dev/null
+#! /bin/sh
+
+COMPILER=$1
+LIBRARY_BASE=$2
+LIBRARY_MAJOR=$3
+LIBRARY_MINOR=$4
+shift 3
+LIBRARY_OBJS=
+while (test $# -ne 1) do
+ shift;
+ LIBRARY_OBJS="$LIBRARY_OBJS $1sh";
+done
+
+LIBRARY_BASE=`echo $LIBRARY_BASE | sed 's/.so/.sa/'`
+LIBRARY_NAME=`basename $LIBRARY_BASE`
+LIBRARY_FILE=$LIBRARY_BASE
+
+echo "Creating shared library: $LIBRARY_FILE"
+
+ar cr $LIBRARY_FILE~ $LIBRARY_OBJS
+nm $LIBRARY_OBJS | awk '/ [BD] /{print $$3}' | sort | uniq > ${LIBRARY_FILE}.syms
+ld -o shr.o $LIBRARY_FILE~ -lX11 -lXt -lc -lm -H512 -T512 -bE:${LIBRARY_FILE}.syms -bM:SRE
+rm -f $LIBRARY_FILE~
+ar ruv $LIBRARY_FILE shr.o
+chmod a+x $LIBRARY_FILE
+
--- /dev/null
+#! /bin/sh
+
+#LIBRARY_BASE=`echo $1 | sed 's/.a/.so/'`
+COMPILER=$1
+LIBRARY_BASE=$2
+LIBRARY_MAJOR=$3
+LIBRARY_MINOR=$4
+shift 3
+LIBRARY_OBJS=
+while (test $# -ne 1) do
+ shift;
+ LIBRARY_OBJS="$LIBRARY_OBJS $1sh";
+done
+
+LIBRARY_NAME=`basename $LIBRARY_BASE`
+LIBRARY_FILE=$LIBRARY_BASE.$LIBRARY_MAJOR.$LIBRARY_MINOR
+
+echo "Creating shared library: $LIBRARY_FILE"
+
+if test "x$COMPILER" = xgcc ; then
+ gcc -shared -o $LIBRARY_FILE $LIBRARY_OBJS
+else
+ CC -Bshareable -Bforcearchive -o $LIBRARY_FILE $LIBRARY_OBJS
+fi
+chmod a+x $LIBRARY_FILE
+rm -f $LIBRARY_BASE.$LIBRARY_MAJOR
+ln -s $LIBRARY_NAME.$LIBRARY_MAJOR.$LIBRARY_MINOR $LIBRARY_BASE.$LIBRARY_MAJOR
+rm -f $LIBRARY_BASE
+ln -s $LIBRARY_NAME.$LIBRARY_MAJOR $LIBRARY_BASE
+
+
+
+
--- /dev/null
+#! /bin/sh
+
+COMPILER=$1
+LIBRARY_BASE=$2
+LIBRARY_MAJOR=$3
+LIBRARY_MINOR=$4
+shift 3
+LIBRARY_OBJS=
+while (test $# -ne 1) do
+ shift;
+ LIBRARY_OBJS="$LIBRARY_OBJS $1sh";
+done
+
+LIBRARY_BASE=`echo $LIBRARY_BASE | sed 's/.so/.sl/'`
+LIBRARY_NAME=`basename $LIBRARY_BASE`
+LIBRARY_FILE=$LIBRARY_BASE
+
+echo "Creating shared library: $LIBRARY_FILE"
+
+if test "x$COMPILER" = xgcc ; then
+ gcc -shared -h $LIBRARY_NAME -o $LIBRARY_FILE $LIBRARY_OBJS
+else
+ CC -G -h $LIBRARY_NAME -o $LIBRARY_FILE $LIBRARY_OBJS
+fi
+chmod a+x $LIBRARY_FILE
+
+
+
+
--- /dev/null
+#! /bin/sh
+
+COMPILER=$1
+LIBRARY_BASE=$2
+LIBRARY_MAJOR=$3
+LIBRARY_MINOR=$4
+shift 3
+LIBRARY_OBJS=
+while (test $# -ne 1) do
+ shift;
+ LIBRARY_OBJS="$LIBRARY_OBJS $1sh";
+done
+
+LIBRARY_BASE=`echo $LIBRARY_BASE | sed 's/.so/.sl/'`
+LIBRARY_NAME=`basename $LIBRARY_BASE`
+LIBRARY_FILE=$LIBRARY_BASE
+
+echo "Creating shared library: $LIBRARY_FILE"
+
+if test "x$COMPILER" = xgcc ; then
+ gcc -shared -o $LIBRARY_FILE $LIBRARY_OBJS
+else
+ CC -Wl,+s -o $LIBRARY_FILE $LIBRARY_OBJS
+fi
+chmod a+x $LIBRARY_FILE
+
+
+
+
--- /dev/null
+#! /bin/sh
+# on Irix, position independent code is the default
+
+#LIBRARY_BASE=`echo $1 | sed 's/.a/.so/'`
+COMPILER=$1
+LIBRARY_BASE=$2
+LIBRARY_MAJOR=$3
+LIBRARY_MINOR=$4
+shift 3
+LIBRARY_OBJS=
+while (test $# -ne 1) do
+ shift;
+ LIBRARY_OBJS="$LIBRARY_OBJS $1";
+done
+
+LIBRARY_NAME=`basename $LIBRARY_BASE`
+LIBRARY_FILE=$LIBRARY_BASE.$LIBRARY_MAJOR.$LIBRARY_MINOR
+
+echo "Creating shared library: $LIBRARY_FILE"
+
+if test ! -f /tmp/so_locations; then
+ if test -f /usr/lib/so_locations; then
+ cp /usr/lib/so_locations /tmp
+ else
+ touch /tmp/so_locations
+ fi
+fi
+chmod u+w /tmp/so_locations
+
+if test "x$COMPILER" = xgcc ; then
+ gcc -shared -Wl,-update_registry,/tmp/so_locations \
+ -Wl,-soname,$LIBRARY_NAME.$LIBRARY_MAJOR -o $LIBRARY_FILE $LIBRARY_OBJS
+else
+ CC -shared -update_registry /tmp/so_locations \
+ -soname $LIBRARY_NAME.$LIBRARY_MAJOR -o $LIBRARY_FILE $LIBRARY_OBJS
+fi
+chmod a+x $LIBRARY_FILE
+rm -f $LIBRARY_BASE.$LIBRARY_MAJOR
+ln -s $LIBRARY_NAME.$LIBRARY_MAJOR.$LIBRARY_MINOR $LIBRARY_BASE.$LIBRARY_MAJOR
+rm -f $LIBRARY_BASE
+ln -s $LIBRARY_NAME.$LIBRARY_MAJOR $LIBRARY_BASE
+
+
+
+
--- /dev/null
+#! /bin/sh
+
+#LIBRARY_BASE=`echo $1 | sed 's/.a/.so/'`
+COMPILER=$1
+LIBRARY_BASE=$2
+LIBRARY_MAJOR=$3
+LIBRARY_MINOR=$4
+shift 3
+LIBRARY_OBJS=
+while (test $# -ne 1) do
+ shift;
+ LIBRARY_OBJS="$LIBRARY_OBJS $1sh";
+done
+
+LIBRARY_NAME=`basename $LIBRARY_BASE`
+LIBRARY_FILE=$LIBRARY_BASE.$LIBRARY_MAJOR.$LIBRARY_MINOR
+
+echo "Creating shared library: $LIBRARY_FILE"
+
+case $COMPILER in gcc*|*gcc)
+ $COMPILER -shared -Wl,-soname,$LIBRARY_NAME.$LIBRARY_MAJOR -o $LIBRARY_FILE $LIBRARY_OBJS
+ ;;
+*)
+ $COMPILER -shared -soname $LIBRARY_NAME.$LIBRARY_MAJOR -o $LIBRARY_FILE $LIBRARY_OBJS
+esac
+chmod a+x $LIBRARY_FILE
+rm -f $LIBRARY_BASE.$LIBRARY_MAJOR
+ln -s $LIBRARY_NAME.$LIBRARY_MAJOR.$LIBRARY_MINOR $LIBRARY_BASE.$LIBRARY_MAJOR
+rm -f $LIBRARY_BASE
+ln -s $LIBRARY_NAME.$LIBRARY_MAJOR $LIBRARY_BASE
+
+
+
+
--- /dev/null
+#! /bin/sh
+
+#LIBRARY_BASE=`echo $1 | sed 's/.a/.so/'`
+COMPILER=$1
+LIBRARY_BASE=$2
+LIBRARY_MAJOR=$3
+LIBRARY_MINOR=$4
+shift 3
+LIBRARY_OBJS=
+while (test $# -ne 1) do
+ shift;
+ LIBRARY_OBJS="$LIBRARY_OBJS $1sh";
+done
+
+LIBRARY_NAME=`basename $LIBRARY_BASE`
+LIBRARY_FILE=$LIBRARY_BASE.$LIBRARY_MAJOR.$LIBRARY_MINOR
+
+echo "Creating shared library: $LIBRARY_FILE"
+
+if test "x$COMPILER" = xgcc ; then
+ gcc -shared -Wl,-soname,$LIBRARY_NAME -o $LIBRARY_FILE $LIBRARY_OBJS
+else
+ $COMPILER -shared -soname $LIBRARY_NAME -o $LIBRARY_FILE $LIBRARY_OBJS
+fi
+chmod a+x $LIBRARY_FILE
+rm -f $LIBRARY_BASE.$LIBRARY_MAJOR
+ln -s $LIBRARY_NAME.$LIBRARY_MAJOR.$LIBRARY_MINOR $LIBRARY_BASE.$LIBRARY_MAJOR
+rm -f $LIBRARY_BASE
+ln -s $LIBRARY_NAME.$LIBRARY_MAJOR $LIBRARY_BASE
+
+
+
+
--- /dev/null
+#! /bin/sh
+
+#LIBRARY_BASE=`echo $1 | sed 's/.a/.so/'`
+COMPILER=$1
+LIBRARY_BASE=$2
+LIBRARY_MAJOR=$3
+LIBRARY_MINOR=$4
+shift 3
+LIBRARY_OBJS=
+while (test $# -ne 1) do
+ shift;
+ LIBRARY_OBJS="$LIBRARY_OBJS $1sh";
+done
+
+LIBRARY_NAME=`basename $LIBRARY_BASE`
+LIBRARY_FILE=$LIBRARY_BASE.$LIBRARY_MAJOR.$LIBRARY_MINOR
+
+echo "Creating shared library: $LIBRARY_FILE"
+
+if test "x$COMPILER" = xgcc ; then
+ gcc -shared -h $LIBRARY_NAME -o $LIBRARY_FILE $LIBRARY_OBJS
+else
+ CC -G -h $LIBRARY_NAME -o $LIBRARY_FILE $LIBRARY_OBJS
+fi
+chmod a+x $LIBRARY_FILE
+rm -f $LIBRARY_BASE.$LIBRARY_MAJOR
+ln -s $LIBRARY_NAME.$LIBRARY_MAJOR.$LIBRARY_MINOR $LIBRARY_BASE.$LIBRARY_MAJOR
+rm -f $LIBRARY_BASE
+ln -s $LIBRARY_NAME.$LIBRARY_MAJOR $LIBRARY_BASE
+
+
+
+
--- /dev/null
+#! /bin/sh
+
+#LIBRARY_BASE=`echo $1 | sed 's/.a/.so/'`
+COMPILER=$1
+LIBRARY_BASE=$2
+LIBRARY_MAJOR=$3
+LIBRARY_MINOR=$4
+shift 3
+LIBRARY_OBJS=
+while (test $# -ne 1) do
+ shift;
+ LIBRARY_OBJS="$LIBRARY_OBJS $1sh";
+done
+
+LIBRARY_NAME=`basename $LIBRARY_BASE`
+LIBRARY_FILE=$LIBRARY_BASE.$LIBRARY_MAJOR.$LIBRARY_MINOR
+
+echo "Creating shared library: $LIBRARY_FILE"
+
+if test "x$COMPILER" = xgcc ; then
+ gcc -shared -o $LIBRARY_FILE $LIBRARY_OBJS
+else
+ CC -assert pure-text -o $LIBRARY_FILE $LIBRARY_OBJS
+fi
+chmod a+x $LIBRARY_FILE
+rm -f $LIBRARY_BASE.$LIBRARY_MAJOR
+ln -s $LIBRARY_NAME.$LIBRARY_MAJOR.$LIBRARY_MINOR $LIBRARY_BASE.$LIBRARY_MAJOR
+rm -f $LIBRARY_BASE
+ln -s $LIBRARY_NAME.$LIBRARY_MAJOR $LIBRARY_BASE
+
+
+
+
--- /dev/null
+#! /bin/sh
+
+COMPILER=$1
+LIBRARY_BASE=$2
+LIBRARY_MAJOR=$3
+LIBRARY_MINOR=$4
+shift 3
+LIBRARY_OBJS=
+while (test $# -ne 1) do
+ shift;
+ LIBRARY_OBJS="$LIBRARY_OBJS $1sh";
+done
+
+LIBRARY_BASE=`echo $LIBRARY_BASE | sed 's/.so/.sl/'`
+LIBRARY_NAME=`basename $LIBRARY_BASE`
+LIBRARY_FILE=$LIBRARY_BASE
+
+echo "Creating shared library: $LIBRARY_FILE"
+
+if test "x$COMPILER" = xgcc ; then
+ gcc -shared -h $LIBRARY_NAME -o $LIBRARY_FILE $LIBRARY_OBJS
+else
+ CC -G -h $LIBRARY_NAME -o $LIBRARY_FILE $LIBRARY_OBJS
+fi
+chmod a+x $LIBRARY_FILE
+
+
+
+
--- /dev/null
+s|*OS*|@OS@|g
+s|*MAKEINCLUDE*|@MAKEINCLUDE@|g
+s|*WXBASEDIR*|@WXBASEDIR@|g
+s|*PROFILE*|@PROFILE@|g
+s|*WXDEBUG*|@WXDEBUG@|g
+s|*WXDEBUG_DEFINE*|@WXDEBUG_DEFINE@|g
+s|*__WXDEBUG__*|@WXDEBUG@|g
+s|*OPTIMISE*|@OPTIMISE@|g
+s|*CC*|@CC@|g
+s|*CFLAGS*|@CFLAGS@|g
+s|*CPP*|@CPP@|g
+s|*CXX*|@CXX@|g
+s|*CXXFLAGS*|@CXXFLAGS@|g
+s|*CXXCPP*|@CXXCPP@|g
+s|*PICFLAGS*|@PICFLAGS@|g
+s|*CREATE_SHARED*|@CREATE_SHARED@|g
+s|*LEX*|@LEX@|g
+s|*LEXLIB*|@LEXLIB@|g
+s|*YACC*|@YACC@|g
+s|*RANLIB*|@RANLIB@|g
+s|*INSTALL*|@INSTALL@|g
+s|*INSTALL_PROGRAM*|@INSTALL_PROGRAM@|g
+s|*INSTALL_DATA*|@INSTALL_DATA@|g
+s|*AWK*|@AWK@|g
+s|*LN_S*|@LN_S@|g
+s|*prefix*|@prefix@|g
+s|*exec_prefix*|@exec_prefix@|g
+s|*bindir*|@bindir@|g
+s|*datadir*|@datadir@|g
+s|*infodir*|@infodir@|g
+s|*X_CFLAGS*|@X_CFLAGS@|g
+s|*X_LIBS*|@X_LIBS@|g
+s|*X_EXTRA_LIBS*|@X_EXTRA_LIBS@|g
+s|*X_PRE_LIBS*|@X_PRE_LIBS@|g
+s|*GUI_TK_INCLUDE*|@GUI_TK_INCLUDE@|g
+s|*GUI_TK_LIBRARY*|@GUI_TK_LIBRARY@|g
+s|*GUI_TK_LINK*|@GUI_TK_LINK@|g
+s|*DL_LIBRARY*|@DL_LIBRARY@|g
+s|*OPENGL_INCLUDE*|@OPENGL_INCLUDE@|g
+s|*OPENGL_LIBRARY*|@OPENGL_LIBRARY@|g
+s|*OPENGL_LINK*|@OPENGL_LINK@|g
+s|*TOOLKIT*|@TOOLKIT@|g
+s|*TOOLKIT_DEF*|@TOOLKIT_DEF@|g
+s|*THREADS*|@THREADS@|g
+s|*THREADS_LINK*|@THREADS_LINK@|g
+s|*WXSTRING*|@WXSTRING@|g
+s|*TYPETREE*|@TYPETREE@|g
+s|*METAFILE*|@METAFILE@|g
+s|*POSTSCRIPTDC*|@POSTSCRIPTDC@|g
+s|*WXGRAPH*|@WXGRAPH@|g
+s|*WXTREE*|@WXTREE@|g
+s|*DOCVIEW*|@DOCVIEW@|g
+s|*FORM*|@FORM@|g
+s|*PRINTPREVIEW*|@PRINTPREVIEW@|g
+s|*IPC*|@IPC@|g
+s|*HELP*|@HELP@|g
+s|*CLIPBOARD*|@CLIPBOARD@|g
+s|*TIMEDATE*|@TIMEDATE@|g
+s|*FRACTION*|@FRACTION@|g
+s|*PROLOGIO*|@PROLOGIO@|g
+s|*PROLOGIOSRC*|@PROLOGIOSRC@|g
+s|*ENHDIALOGBOX*|@ENHDIALOGBOX@|g
+s|*GAUGE*|@GAUGE@|g
+s|*GLCANVAS*|@GLCANVAS@|g
+s|*LAYOUT*|@LAYOUT@|g
+s|*WXRESOURCES*|@WXRESOURCES@|g
+s|*XRESOURCES*|@XRESOURCES@|g
+s|*SCROLLBAR*|@SCROLLBAR@|g
+s|*STATICITEMS*|@STATICITEMS@|g
+s|*TOOLBAR*|@TOOLBAR@|g
+s|*CONSTRAINTS*|@CONSTRAINTS@|g
+s|*RPC*|@RPC@|g
+s|*VIRLISTBOX*|@VIRLISTBOX@|g
+s|*GTK_JOYSTICK*|@GTK_JOYSTICK@|g
+s|*UNIX_THREAD*|@UNIX_THREAD@|g
#
-# wxGTK main source makefile
+# wxWindows/Unix main source makefile
#
# Copyright 1998, Markus Holzhem and Robert Roebling
#
-# wxGTK base directory
+# wxWindows base directory
WXBASEDIR=@WXBASEDIR@
# set the OS type for compilation
# define common stuff
-# needed for unactivated
-NONE =
+# include gtk.inc, qt.inc or motif.inc here
+include @MAKEINCLUDE@
-# define library name
-LIB_TARGET=wx_gtk
-LIB_MAJOR=1
-LIB_MINOR=90
+LIB_CPP_ALL_SRC=$(LIB_CPP_SRC) @GTK_JOYSTICK@ @UNIX_THREAD@
-# define library sources
-
-LIB_CPP_SRC=\
-\
- common/cmndata.cpp \
- common/config.cpp \
- common/date.cpp \
- common/docmdi.cpp \
- common/docview.cpp \
- common/dynarray.cpp \
- common/event.cpp \
- common/file.cpp \
- common/fileconf.cpp \
- common/filefn.cpp \
- common/gdicmn.cpp \
- common/hash.cpp \
- common/helpbase.cpp \
- common/intl.cpp \
- common/ipcbase.cpp \
- common/layout.cpp \
- common/list.cpp \
- common/log.cpp \
- common/matrix.cpp \
- common/memory.cpp \
- common/module.cpp \
- common/object.cpp \
- common/odbc.cpp \
- common/postscrp.cpp \
- common/prntbase.cpp \
- common/string.cpp \
- common/textfile.cpp \
- common/time.cpp \
- common/timercmn.cpp \
- common/utilscmn.cpp \
- common/wincmn.cpp \
- common/framecmn.cpp \
- common/stream.cpp \
- common/datstrm.cpp \
- common/fstream.cpp \
- common/mstream.cpp \
- common/zstream.cpp \
- common/objstrm.cpp \
- common/framecmn.cpp \
- common/wincmn.cpp \
-\
- gtk/app.cpp \
- gtk/bitmap.cpp \
- gtk/brush.cpp \
- gtk/button.cpp \
- gtk/checkbox.cpp \
- gtk/choice.cpp \
- gtk/colour.cpp \
- gtk/control.cpp \
- gtk/combobox.cpp \
- gtk/cursor.cpp \
- gtk/data.cpp \
- gtk/dc.cpp \
- gtk/dcclient.cpp \
- gtk/dcmemory.cpp \
- gtk/dcscreen.cpp \
- gtk/dnd.cpp \
- gtk/dialog.cpp \
- gtk/filedlg.cpp \
- gtk/font.cpp \
- gtk/frame.cpp \
- gtk/gauge.cpp \
- gtk/gdiobj.cpp \
- gtk/icon.cpp \
- gtk/listbox.cpp \
- gtk/mdi.cpp \
- gtk/menu.cpp \
- gtk/notebook.cpp \
- gtk/palette.cpp \
- gtk/pen.cpp \
- gtk/radiobox.cpp \
- gtk/radiobut.cpp \
- gtk/region.cpp \
- gtk/scrolbar.cpp \
- gtk/settings.cpp \
- gtk/slider.cpp \
- gtk/statbox.cpp \
- gtk/stattext.cpp \
- gtk/tbargtk.cpp \
- gtk/textctrl.cpp \
- gtk/timer.cpp \
- gtk/utilsgtk.cpp \
- gtk/utilsres.cpp \
- gtk/window.cpp \
- @GTK_JOYSTICK@ \
- @UNIX_THREAD@ \
-\
- generic/choicdgg.cpp \
- generic/colrdlgg.cpp \
- generic/fontdlgg.cpp \
- generic/gridg.cpp \
- generic/imaglist.cpp \
- generic/listctrl.cpp \
- generic/msgdlgg.cpp \
- generic/panelg.cpp \
- generic/printps.cpp \
- generic/prntdlgg.cpp \
- generic/scrolwin.cpp \
- generic/splitter.cpp \
- generic/statusbr.cpp \
- generic/tabg.cpp \
- generic/textdlgg.cpp \
- generic/treectrl.cpp
-
-# common/dynlib.cpp Disabled until I write support for DLL on all platforms
-
-LIB_C_SRC=\
- common/extended.c \
-\
- gtk/win_gtk.c \
-\
- png/png.c \
- png/pngset.c \
- png/pngget.c \
- png/pngrutil.c \
- png/pngtrans.c \
- png/pngwutil.c \
- png/pngread.c \
- png/pngrio.c \
- png/pngwio.c \
- png/pngwrite.c \
- png/pngrtran.c \
- png/pngwtran.c \
- png/pngmem.c \
- png/pngerror.c \
- png/pngpread.c \
-\
- zlib/adler32.c \
- zlib/compress.c \
- zlib/crc32.c \
- zlib/gzio.c \
- zlib/uncompr.c \
- zlib/deflate.c \
- zlib/trees.c \
- zlib/zutil.c \
- zlib/inflate.c \
- zlib/infblock.c \
- zlib/inftrees.c \
- zlib/infcodes.c \
- zlib/infutil.c \
- zlib/inffast.c \
-\
- gdk_imlib/cache.c \
- gdk_imlib/colors.c \
- gdk_imlib/globals.c \
- gdk_imlib/load.c \
- gdk_imlib/misc.c \
- gdk_imlib/rend.c \
- gdk_imlib/save.c \
- gdk_imlib/utils.c \
-\
- iodbc/dlf.c \
- iodbc/dlproc.c \
- iodbc/herr.c \
- iodbc/henv.c \
- iodbc/hdbc.c \
- iodbc/hstmt.c \
- iodbc/connect.c \
- iodbc/prepare.c \
- iodbc/result.c \
- iodbc/execute.c \
- iodbc/fetch.c \
- iodbc/info.c \
- iodbc/catalog.c \
- iodbc/misc.c \
- iodbc/itrace.c
-
#define library objects
LIB_OBJ=\
- $(LIB_CPP_SRC:.cpp=.o) \
+ $(LIB_CPP_ALL_SRC:.cpp=.o) \
$(LIB_C_SRC:.c=.o)
all::
clean::
$(RM) -rf gtk
+ $(RM) -rf qt
+ $(RM) -rf motif
$(RM) -rf common
$(RM) -rf generic
$(RM) -rf png
--- /dev/null
+# needed for unactivated
+NONE =
+
+# define library name
+LIB_TARGET=wx_gtk
+LIB_MAJOR=1
+LIB_MINOR=91
+
+# define library sources
+
+LIB_CPP_SRC=\
+\
+ common/cmndata.cpp \
+ common/config.cpp \
+ common/date.cpp \
+ common/docmdi.cpp \
+ common/docview.cpp \
+ common/dynarray.cpp \
+ common/event.cpp \
+ common/file.cpp \
+ common/fileconf.cpp \
+ common/filefn.cpp \
+ common/gdicmn.cpp \
+ common/hash.cpp \
+ common/helpbase.cpp \
+ common/intl.cpp \
+ common/ipcbase.cpp \
+ common/layout.cpp \
+ common/list.cpp \
+ common/log.cpp \
+ common/matrix.cpp \
+ common/memory.cpp \
+ common/module.cpp \
+ common/object.cpp \
+ common/odbc.cpp \
+ common/postscrp.cpp \
+ common/prntbase.cpp \
+ common/string.cpp \
+ common/textfile.cpp \
+ common/time.cpp \
+ common/timercmn.cpp \
+ common/utilscmn.cpp \
+ common/wincmn.cpp \
+ common/framecmn.cpp \
+ common/stream.cpp \
+ common/datstrm.cpp \
+ common/fstream.cpp \
+ common/mstream.cpp \
+ common/zstream.cpp \
+ common/objstrm.cpp \
+ common/framecmn.cpp \
+ common/wincmn.cpp \
+\
+ gtk/app.cpp \
+ gtk/bitmap.cpp \
+ gtk/brush.cpp \
+ gtk/button.cpp \
+ gtk/checkbox.cpp \
+ gtk/choice.cpp \
+ gtk/colour.cpp \
+ gtk/control.cpp \
+ gtk/combobox.cpp \
+ gtk/cursor.cpp \
+ gtk/data.cpp \
+ gtk/dc.cpp \
+ gtk/dcclient.cpp \
+ gtk/dcmemory.cpp \
+ gtk/dcscreen.cpp \
+ gtk/dnd.cpp \
+ gtk/dialog.cpp \
+ gtk/filedlg.cpp \
+ gtk/font.cpp \
+ gtk/frame.cpp \
+ gtk/gauge.cpp \
+ gtk/gdiobj.cpp \
+ gtk/icon.cpp \
+ gtk/listbox.cpp \
+ gtk/mdi.cpp \
+ gtk/menu.cpp \
+ gtk/notebook.cpp \
+ gtk/palette.cpp \
+ gtk/pen.cpp \
+ gtk/radiobox.cpp \
+ gtk/radiobut.cpp \
+ gtk/region.cpp \
+ gtk/scrolbar.cpp \
+ gtk/settings.cpp \
+ gtk/slider.cpp \
+ gtk/statbox.cpp \
+ gtk/stattext.cpp \
+ gtk/tbargtk.cpp \
+ gtk/textctrl.cpp \
+ gtk/timer.cpp \
+ gtk/utilsgtk.cpp \
+ gtk/utilsres.cpp \
+ gtk/window.cpp \
+\
+ generic/choicdgg.cpp \
+ generic/colrdlgg.cpp \
+ generic/fontdlgg.cpp \
+ generic/gridg.cpp \
+ generic/imaglist.cpp \
+ generic/listctrl.cpp \
+ generic/msgdlgg.cpp \
+ generic/panelg.cpp \
+ generic/printps.cpp \
+ generic/prntdlgg.cpp \
+ generic/scrolwin.cpp \
+ generic/splitter.cpp \
+ generic/statusbr.cpp \
+ generic/tabg.cpp \
+ generic/textdlgg.cpp \
+ generic/treectrl.cpp
+
+# common/dynlib.cpp Disabled until I write support for DLL on all platforms
+
+LIB_C_SRC=\
+ common/extended.c \
+\
+ gtk/win_gtk.c \
+\
+ png/png.c \
+ png/pngset.c \
+ png/pngget.c \
+ png/pngrutil.c \
+ png/pngtrans.c \
+ png/pngwutil.c \
+ png/pngread.c \
+ png/pngrio.c \
+ png/pngwio.c \
+ png/pngwrite.c \
+ png/pngrtran.c \
+ png/pngwtran.c \
+ png/pngmem.c \
+ png/pngerror.c \
+ png/pngpread.c \
+\
+ zlib/adler32.c \
+ zlib/compress.c \
+ zlib/crc32.c \
+ zlib/gzio.c \
+ zlib/uncompr.c \
+ zlib/deflate.c \
+ zlib/trees.c \
+ zlib/zutil.c \
+ zlib/inflate.c \
+ zlib/infblock.c \
+ zlib/inftrees.c \
+ zlib/infcodes.c \
+ zlib/infutil.c \
+ zlib/inffast.c \
+\
+ gdk_imlib/cache.c \
+ gdk_imlib/colors.c \
+ gdk_imlib/globals.c \
+ gdk_imlib/load.c \
+ gdk_imlib/misc.c \
+ gdk_imlib/rend.c \
+ gdk_imlib/save.c \
+ gdk_imlib/utils.c \
+\
+ iodbc/dlf.c \
+ iodbc/dlproc.c \
+ iodbc/herr.c \
+ iodbc/henv.c \
+ iodbc/hdbc.c \
+ iodbc/hstmt.c \
+ iodbc/connect.c \
+ iodbc/prepare.c \
+ iodbc/result.c \
+ iodbc/execute.c \
+ iodbc/fetch.c \
+ iodbc/info.c \
+ iodbc/catalog.c \
+ iodbc/misc.c \
+ iodbc/itrace.c
mkdir gtk
fi
+# create "/qt" if not present
+if test ! -d gtk; then
+ mkdir gtk
+fi
+
+# create "/motif" if not present
+if test ! -d gtk; then
+ mkdir gtk
+fi
+
# create "/common" if not present
if test ! -d common; then
mkdir common
--- /dev/null
+# needed for unactivated
+NONE =
+
+# define library name
+LIB_TARGET=wx_motif
+LIB_MAJOR=0
+LIB_MINOR=1
+
+# define library sources
+
+LIB_CPP_SRC=\
+\
+
+LIB_C_SRC=\
+\
+ png/png.c \
+ png/pngset.c \
+ png/pngget.c \
+ png/pngrutil.c \
+ png/pngtrans.c \
+ png/pngwutil.c \
+ png/pngread.c \
+ png/pngrio.c \
+ png/pngwio.c \
+ png/pngwrite.c \
+ png/pngrtran.c \
+ png/pngwtran.c \
+ png/pngmem.c \
+ png/pngerror.c \
+ png/pngpread.c \
+\
+ zlib/adler32.c \
+ zlib/compress.c \
+ zlib/crc32.c \
+ zlib/gzio.c \
+ zlib/uncompr.c \
+ zlib/deflate.c \
+ zlib/trees.c \
+ zlib/zutil.c \
+ zlib/inflate.c \
+ zlib/infblock.c \
+ zlib/inftrees.c \
+ zlib/infcodes.c \
+ zlib/infutil.c \
+ zlib/inffast.c \
+\
+ iodbc/dlf.c \
+ iodbc/dlproc.c \
+ iodbc/herr.c \
+ iodbc/henv.c \
+ iodbc/hdbc.c \
+ iodbc/hstmt.c \
+ iodbc/connect.c \
+ iodbc/prepare.c \
+ iodbc/result.c \
+ iodbc/execute.c \
+ iodbc/fetch.c \
+ iodbc/info.c \
+ iodbc/catalog.c \
+ iodbc/misc.c \
+ iodbc/itrace.c
--- /dev/null
+# needed for unactivated
+NONE =
+
+# define library name
+LIB_TARGET=wx_qt
+LIB_MAJOR=0
+LIB_MINOR=1
+
+# define library sources
+
+LIB_CPP_SRC=\
+\
+
+LIB_C_SRC=\
+\
+ png/png.c \
+ png/pngset.c \
+ png/pngget.c \
+ png/pngrutil.c \
+ png/pngtrans.c \
+ png/pngwutil.c \
+ png/pngread.c \
+ png/pngrio.c \
+ png/pngwio.c \
+ png/pngwrite.c \
+ png/pngrtran.c \
+ png/pngwtran.c \
+ png/pngmem.c \
+ png/pngerror.c \
+ png/pngpread.c \
+\
+ zlib/adler32.c \
+ zlib/compress.c \
+ zlib/crc32.c \
+ zlib/gzio.c \
+ zlib/uncompr.c \
+ zlib/deflate.c \
+ zlib/trees.c \
+ zlib/zutil.c \
+ zlib/inflate.c \
+ zlib/infblock.c \
+ zlib/inftrees.c \
+ zlib/infcodes.c \
+ zlib/infutil.c \
+ zlib/inffast.c \
+\
+ iodbc/dlf.c \
+ iodbc/dlproc.c \
+ iodbc/herr.c \
+ iodbc/henv.c \
+ iodbc/hdbc.c \
+ iodbc/hstmt.c \
+ iodbc/connect.c \
+ iodbc/prepare.c \
+ iodbc/result.c \
+ iodbc/execute.c \
+ iodbc/fetch.c \
+ iodbc/info.c \
+ iodbc/catalog.c \
+ iodbc/misc.c \
+ iodbc/itrace.c
projects / wxWidgets.git / commitdiff
