+++ /dev/null
-SUBDIRS = html lseditor glcanvas
-
-all:
- -for i in $(SUBDIRS); do \
- if test ! -r $$i/Makefile ; then \
- make -C $$i -f Makefile.pre.in boot ; \
- fi ; \
- make -C $$i; \
- done
-
-# Generic target for i.e. install, clean, distclean...
-%:
- -for i in $(SUBDIRS); do \
- if test ! -r $$i/Makefile ; then \
- make -C $$i -f Makefile.pre.in boot ; \
- fi ; \
- make -C $$i $@; \
- done
-
-
-
-
+++ /dev/null
-# Universal Unix Makefile for Python extensions
-# =============================================
-
-# Short Instructions
-# ------------------
-
-# 1. Build and install Python (1.5 or newer).
-# 2. "make -f Makefile.pre.in boot"
-# 3. "make"
-# You should now have a shared library.
-
-# Long Instructions
-# -----------------
-
-# Build *and install* the basic Python 1.5 distribution. See the
-# Python README for instructions. (This version of Makefile.pre.in
-# only withs with Python 1.5, alpha 3 or newer.)
-
-# Create a file Setup.in for your extension. This file follows the
-# format of the Modules/Setup.in file; see the instructions there.
-# For a simple module called "spam" on file "spammodule.c", it can
-# contain a single line:
-# spam spammodule.c
-# You can build as many modules as you want in the same directory --
-# just have a separate line for each of them in the Setup.in file.
-
-# If you want to build your extension as a shared library, insert a
-# line containing just the string
-# *shared*
-# at the top of your Setup.in file.
-
-# Note that the build process copies Setup.in to Setup, and then works
-# with Setup. It doesn't overwrite Setup when Setup.in is changed, so
-# while you're in the process of debugging your Setup.in file, you may
-# want to edit Setup instead, and copy it back to Setup.in later.
-# (All this is done so you can distribute your extension easily and
-# someone else can select the modules they actually want to build by
-# commenting out lines in the Setup file, without editing the
-# original. Editing Setup is also used to specify nonstandard
-# locations for include or library files.)
-
-# Copy this file (Misc/Makefile.pre.in) to the directory containing
-# your extension.
-
-# Run "make -f Makefile.pre.in boot". This creates Makefile
-# (producing Makefile.pre and sedscript as intermediate files) and
-# config.c, incorporating the values for sys.prefix, sys.exec_prefix
-# and sys.version from the installed Python binary. For this to work,
-# the python binary must be on your path. If this fails, try
-# make -f Makefile.pre.in Makefile VERSION=1.5 installdir=<prefix>
-# where <prefix> is the prefix used to install Python for installdir
-# (and possibly similar for exec_installdir=<exec_prefix>).
-
-# Note: "make boot" implies "make clobber" -- it assumes that when you
-# bootstrap you may have changed platforms so it removes all previous
-# output files.
-
-# If you are building your extension as a shared library (your
-# Setup.in file starts with *shared*), run "make" or "make sharedmods"
-# to build the shared library files. If you are building a statically
-# linked Python binary (the only solution of your platform doesn't
-# support shared libraries, and sometimes handy if you want to
-# distribute or install the resulting Python binary), run "make
-# python".
-
-# Note: Each time you edit Makefile.pre.in or Setup, you must run
-# "make Makefile" before running "make".
-
-# Hint: if you want to use VPATH, you can start in an empty
-# subdirectory and say (e.g.):
-# make -f ../Makefile.pre.in boot srcdir=.. VPATH=..
-
-
-# === Bootstrap variables (edited through "make boot") ===
-
-# The prefix used by "make inclinstall libainstall" of core python
-installdir= /usr/local
-
-# The exec_prefix used by the same
-exec_installdir=$(installdir)
-
-# Source directory and VPATH in case you want to use VPATH.
-# (You will have to edit these two lines yourself -- there is no
-# automatic support as the Makefile is not generated by
-# config.status.)
-srcdir= .
-VPATH= .
-
-# === Variables that you may want to customize (rarely) ===
-
-# (Static) build target
-TARGET= python
-
-# Installed python binary (used only by boot target)
-PYTHON= python
-
-# Add more -I and -D options here
-CFLAGS= $(OPT) -I$(INCLUDEPY) -I$(EXECINCLUDEPY) $(DEFS)
-
-# These two variables can be set in Setup to merge extensions.
-# See example[23].
-BASELIB=
-BASESETUP=
-
-# === Variables set by makesetup ===
-
-MODOBJS= _MODOBJS_
-MODLIBS= _MODLIBS_
-
-# === Definitions added by makesetup ===
-
-# === Variables from configure (through sedscript) ===
-
-VERSION= @VERSION@
-CC= @CC@
-LINKCC= @LINKCC@
-SGI_ABI= @SGI_ABI@
-OPT= @OPT@
-LDFLAGS= @LDFLAGS@
-LDLAST= @LDLAST@
-DEFS= @DEFS@
-LIBS= @LIBS@
-LIBM= @LIBM@
-LIBC= @LIBC@
-RANLIB= @RANLIB@
-MACHDEP= @MACHDEP@
-SO= @SO@
-LDSHARED= @LDSHARED@
-CCSHARED= @CCSHARED@
-LINKFORSHARED= @LINKFORSHARED@
-#@SET_CCC@
-
-# Install prefix for architecture-independent files
-prefix= /usr/local
-
-# Install prefix for architecture-dependent files
-exec_prefix= $(prefix)
-
-# === Fixed definitions ===
-
-# Shell used by make (some versions default to the login shell, which is bad)
-SHELL= /bin/sh
-
-# Expanded directories
-BINDIR= $(exec_installdir)/bin
-LIBDIR= $(exec_prefix)/lib
-MANDIR= $(installdir)/man
-INCLUDEDIR= $(installdir)/include
-SCRIPTDIR= $(prefix)/lib
-
-# Detailed destination directories
-BINLIBDEST= $(LIBDIR)/python$(VERSION)
-LIBDEST= $(SCRIPTDIR)/python$(VERSION)
-INCLUDEPY= $(INCLUDEDIR)/python$(VERSION)
-EXECINCLUDEPY= $(exec_installdir)/include/python$(VERSION)
-LIBP= $(exec_installdir)/lib/python$(VERSION)
-DESTSHARED= $(BINLIBDEST)/site-packages
-
-LIBPL= $(LIBP)/config
-
-PYTHONLIBS= $(LIBPL)/libpython$(VERSION).a
-
-MAKESETUP= $(LIBPL)/makesetup
-MAKEFILE= $(LIBPL)/Makefile
-CONFIGC= $(LIBPL)/config.c
-CONFIGCIN= $(LIBPL)/config.c.in
-SETUP= $(LIBPL)/Setup
-
-SYSLIBS= $(LIBM) $(LIBC)
-
-ADDOBJS= $(LIBPL)/python.o config.o
-
-# Portable install script (configure doesn't always guess right)
-INSTALL= $(LIBPL)/install-sh -c
-# Shared libraries must be installed with executable mode on some systems;
-# rather than figuring out exactly which, we always give them executable mode.
-# Also, making them read-only seems to be a good idea...
-INSTALL_SHARED= ${INSTALL} -m 555
-
-#---------------------------------------------------
-# Possibly change some definintions for C++
-ifdef MY_LDSHARED
-LDSHARED=$(MY_LDSHARED)
-endif
-ifdef MY_LINKCC
-LINKCC=$(MY_LINKCC)
-endif
-
-
-# === Fixed rules ===
-
-# Default target. This builds shared libraries only
-default: sharedmods
-
-# Build everything
-all: static sharedmods
-
-# Build shared libraries from our extension modules
-sharedmods: $(SHAREDMODS)
-
-# Build a static Python binary containing our extension modules
-static: $(TARGET)
-$(TARGET): $(ADDOBJS) lib.a $(PYTHONLIBS) Makefile $(BASELIB)
- $(LINKCC) $(LDFLAGS) $(LINKFORSHARED) \
- $(ADDOBJS) lib.a $(PYTHONLIBS) \
- $(LINKPATH) $(BASELIB) $(MODLIBS) $(LIBS) $(SYSLIBS) \
- -o $(TARGET) $(LDLAST)
-
-#------------------------------------------------------------------------
-#------------------------------------------------------------------------
-# This is a default version of the install target for wxPython. It just
-# redirects to wxInstall below...
-
-install: wxInstall
-
-#install: sharedmods
-# if test ! -d $(DESTSHARED) ; then \
-# mkdir $(DESTSHARED) ; else true ; fi
-# -for i in X $(SHAREDMODS); do \
-# if test $$i != X; \
-# then $(INSTALL_SHARED) $$i $(DESTSHARED)/$$i; \
-# fi; \
-# done
-
-
-# Build the library containing our extension modules
-lib.a: $(MODOBJS)
- -rm -f lib.a
- ar cr lib.a $(MODOBJS)
- -$(RANLIB) lib.a
-
-# This runs makesetup *twice* to use the BASESETUP definition from Setup
-config.c Makefile: Makefile.pre Setup $(BASESETUP) $(MAKESETUP)
- $(MAKESETUP) \
- -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
- $(MAKE) -f Makefile do-it-again
-
-# Internal target to run makesetup for the second time
-do-it-again:
- $(MAKESETUP) \
- -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
-
-# Make config.o from the config.c created by makesetup
-config.o: config.c
- $(CC) $(CFLAGS) -c config.c
-
-# Setup is copied from Setup.in *only* if it doesn't yet exist
-Setup:
- cp Setup.in Setup
-
-# Make the intermediate Makefile.pre from Makefile.pre.in
-Makefile.pre: Makefile.pre.in sedscript
- sed -f sedscript Makefile.pre.in >Makefile.pre
-
-# Shortcuts to make the sed arguments on one line
-P=prefix
-E=exec_prefix
-H=Generated automatically from Makefile.pre.in by sedscript.
-L=LINKFORSHARED
-
-# Make the sed script used to create Makefile.pre from Makefile.pre.in
-sedscript: $(MAKEFILE)
- sed -n \
- -e '1s/.*/1i\\/p' \
- -e '2s%.*%# $H%p' \
- -e '/^VERSION=/s/^VERSION=[ ]*\(.*\)/s%@VERSION[@]%\1%/p' \
- -e '/^CC=/s/^CC=[ ]*\(.*\)/s%@CC[@]%\1%/p' \
- -e '/^CCC=/s/^CCC=[ ]*\(.*\)/s%#@SET_CCC[@]%CCC=\1%/p' \
- -e '/^LINKCC=/s/^LINKCC=[ ]*\(.*\)/s%@LINKCC[@]%\1%/p' \
- -e '/^OPT=/s/^OPT=[ ]*\(.*\)/s%@OPT[@]%\1%/p' \
- -e '/^LDFLAGS=/s/^LDFLAGS=[ ]*\(.*\)/s%@LDFLAGS[@]%\1%/p' \
- -e '/^DEFS=/s/^DEFS=[ ]*\(.*\)/s%@DEFS[@]%\1%/p' \
- -e '/^LIBS=/s/^LIBS=[ ]*\(.*\)/s%@LIBS[@]%\1%/p' \
- -e '/^LIBM=/s/^LIBM=[ ]*\(.*\)/s%@LIBM[@]%\1%/p' \
- -e '/^LIBC=/s/^LIBC=[ ]*\(.*\)/s%@LIBC[@]%\1%/p' \
- -e '/^RANLIB=/s/^RANLIB=[ ]*\(.*\)/s%@RANLIB[@]%\1%/p' \
- -e '/^MACHDEP=/s/^MACHDEP=[ ]*\(.*\)/s%@MACHDEP[@]%\1%/p' \
- -e '/^SO=/s/^SO=[ ]*\(.*\)/s%@SO[@]%\1%/p' \
- -e '/^LDSHARED=/s/^LDSHARED=[ ]*\(.*\)/s%@LDSHARED[@]%\1%/p' \
- -e '/^CCSHARED=/s/^CCSHARED=[ ]*\(.*\)/s%@CCSHARED[@]%\1%/p' \
- -e '/^$L=/s/^$L=[ ]*\(.*\)/s%@$L[@]%\1%/p' \
- -e '/^$P=/s/^$P=\(.*\)/s%^$P=.*%$P=\1%/p' \
- -e '/^$E=/s/^$E=\(.*\)/s%^$E=.*%$E=\1%/p' \
- $(MAKEFILE) >sedscript
- echo "/^#@SET_CCC@/d" >>sedscript
- echo "/^installdir=/s%=.*%= $(installdir)%" >>sedscript
- echo "/^exec_installdir=/s%=.*%=$(exec_installdir)%" >>sedscript
- echo "/^srcdir=/s%=.*%= $(srcdir)%" >>sedscript
- echo "/^VPATH=/s%=.*%= $(VPATH)%" >>sedscript
- echo "/^LINKPATH=/s%=.*%= $(LINKPATH)%" >>sedscript
- echo "/^BASELIB=/s%=.*%= $(BASELIB)%" >>sedscript
- echo "/^BASESETUP=/s%=.*%= $(BASESETUP)%" >>sedscript
-
-# Bootstrap target
-boot: clobber
- VERSION=`$(PYTHON) -c "import sys; print sys.version[:3]"`; \
- installdir=`$(PYTHON) -c "import sys; print sys.prefix"`; \
- exec_installdir=`$(PYTHON) -c "import sys; print sys.exec_prefix"`; \
- $(MAKE) -f Makefile.pre.in VPATH=$(VPATH) srcdir=$(srcdir) \
- VERSION=$$VERSION \
- installdir=$$installdir \
- exec_installdir=$$exec_installdir \
- Makefile
-
-# Handy target to remove intermediate files and backups
-clean:
- -rm -f *.o *~
-
-# Handy target to remove everything that is easily regenerated
-clobber: clean
- -rm -f *.a tags TAGS config.c Makefile.pre $(TARGET) sedscript
- -rm -f *.so *.sl so_locations
-
-
-# Handy target to remove everything you don't want to distribute
-distclean: clobber
- -rm -f Makefile Setup
-
-
-
-
-#------------------------------------------------------------------------
-#------------------------------------------------------------------------
-# Custom rules and dependencies added for wxPython
-#
-
-WXP_VERSION=2.1b2
-
-# WXP_SRCDIR=../wxPython/src
-
-SWIGFLAGS=-c++ -shadow -python -dnone -I$(WXP_SRCDIR) -D__WXGTK__ $(SEPARATE)
-
-
-# Implicit rules to run SWIG
-$(GENCODEDIR)/%.cpp : %.i
- swig $(SWIGFLAGS) -c -o $@ $<
-
-$(GENCODEDIR)/%.py : %.i
- swig $(SWIGFLAGS) -c -o $@ $<
-$(GENCODEDIR)/%.py : %.i
- swig $(SWIGFLAGS) -c -o $(GENCODEDIR)/tmp_wrap.cpp $<
- rm $(GENCODEDIR)/tmp_wrap.cpp
-
-
-wxInstall : sharedmods $(PYMODULES)
- if test ! -d $(TARGETDIR) ; then \
- mkdir $(TARGETDIR) ; else true ; fi
- if [ "$(SHAREDMODS)" != "" ]; then \
- chmod 755 $(SHAREDMODS); \
- cp $(SHAREDMODS) $(TARGETDIR); fi
- -for i in $(PYMODULES); do \
- cp $$i $(TARGETDIR); \
- done
- if [ "$(TARGETDIR)" != ".." ]; then \
- python $(LIBDEST)/compileall.py $(TARGETDIR); \
- python -O $(LIBDEST)/compileall.py $(TARGETDIR); \
- else \
- python $(LIBDEST)/compileall.py -l $(TARGETDIR); \
- python -O $(LIBDEST)/compileall.py -l $(TARGETDIR);\
- fi
-
-$(GENCODEDIR)/_glcanvas.cpp:
- -cp $(WXWIN)/utils/glcanvas/$(GENCODEDIR)/glcanvas.cpp $@
- -cp $(WXWIN)/utils/glcanvas/$(GENCODEDIR)/glcanvas.h $(GENCODEDIR)/glcanvas.h
-
+++ /dev/null
-## This file gives the details of what is needed to build this extension
-## module so the Makefile can be created.
-
-## If you have not done "make install" for wxWindows then see Setup.in.linux
-## for a more verbose version of this file.
-
-*shared*
-
-CCC=c++
-WXWIN=../../../..
-GENCODEDIR=gtk
-# srcdir=$(GENCODEDIR)
-WX_CONFIG_CFLAGS=`wx-config --cflags`
-WX_CONFIG_LIBS=`wx-config --libs`
-
-
-## Depending on how your Python was built, you may have to set this
-## value to use the C++ driver to link with instead of the default
-## C driver. For example:
-MY_LDSHARED=$(CCC) -shared
-
-## Same as above, but for statically linking Python and wxPython together,
-## in other words, if you comment out the *shared* above. If this is the
-## case then you should ensure that the main() function is Python's, not
-## wxWindows'. You can rebuild $(WXWIN)/src/gtk/app.cpp with NOMAIN defined
-## to force this...
-MY_LINKCC=$(CCC)
-
-#--------------------------------------------------------------------
-#
-# Below follow settings that may be specific for a wxPython module
-#
-#--------------------------------------------------------------------
-
-## Pick one of these, or set your own. This is where the wxPython module
-## should be installed. It should be a subdirectory named wxPython.
-#TARGETDIR=../..
-TARGETDIR=$(BINLIBDEST)/site-packages/wxPython
-
-# The location of the wxPython source dir
-WXP_SRCDIR=../../src
-
-# These defines are usually best left alone
-C_DEFINES = -DSWIG_GLOBAL -DWXP_USE_THREAD -DSEPARATE
-C_FLAGS = -I. -I$(WXP_SRCDIR) $(WX_CONFIG_CFLAGS)
-# Add a couple of GL libraries
-C_LIBS = -lwxPyHelpers -lMesaGL -lMesaGLU $(WX_CONFIG_LIBS)
-
-PYMODULES = $(GENCODEDIR)/glcanvas.py
-
-glcanvasc $(GENCODEDIR)/glcanvas.cpp $(GENCODEDIR)/_glcanvas.cpp \
- $(C_DEFINES) $(C_FLAGS) -Xlinker $(C_LIBS)
+++ /dev/null
-
-#----------------------------------------------------------------------
-
-TARGET = glcanvasc
-
-OBJECTS = glcanvas.obj
-
-PYMODULES = $(TARGETDIR)\html.py $(TARGETDIR)\htmlhelper.py
-
-SOURCES = $(GENCODEDIR)\html.cpp
-
-
-#----------------------------------------------------------------------
-
-!include ..\makeinc.vc
-
-# override this
-EXTRAINC = $(EXTRAINC) -I$(WXDIR)\utils\glcanvas\win
-GLLIBS=$(WXDIR)\lib\glcanvas.lib glu32.lib opengl32.lib
-
-#----------------------------------------------------------------------
-
-default: $(TARGETDIR)\$(TARGET).pyd pycfiles
-
-all: $(TARGET)
-
-$(GENCODEDIR)/glcanvas.cpp : glcanvas.i
-
-#----------------------------------------------------------------------
-
-$(TARGETDIR)\$(TARGET).pyd : $(DUMMYOBJ) $(WXLIB) $(OBJECTS) # $(TARGET).res
- $(link) @<<
-/out:$@ /dll
-$(LFLAGS) /def:$(TARGET).def /implib:./$(TARGET).lib
-$(DUMMYOBJ) $(OBJECTS)
-$(LIBS) $(GLLIBS)
-<<
-
-#----------------------------------------------------------------------
-
+++ /dev/null
-# Universal Unix Makefile for Python extensions
-# =============================================
-
-# Short Instructions
-# ------------------
-
-# 1. Build and install Python (1.5 or newer).
-# 2. "make -f Makefile.pre.in boot"
-# 3. "make"
-# You should now have a shared library.
-
-# Long Instructions
-# -----------------
-
-# Build *and install* the basic Python 1.5 distribution. See the
-# Python README for instructions. (This version of Makefile.pre.in
-# only withs with Python 1.5, alpha 3 or newer.)
-
-# Create a file Setup.in for your extension. This file follows the
-# format of the Modules/Setup.in file; see the instructions there.
-# For a simple module called "spam" on file "spammodule.c", it can
-# contain a single line:
-# spam spammodule.c
-# You can build as many modules as you want in the same directory --
-# just have a separate line for each of them in the Setup.in file.
-
-# If you want to build your extension as a shared library, insert a
-# line containing just the string
-# *shared*
-# at the top of your Setup.in file.
-
-# Note that the build process copies Setup.in to Setup, and then works
-# with Setup. It doesn't overwrite Setup when Setup.in is changed, so
-# while you're in the process of debugging your Setup.in file, you may
-# want to edit Setup instead, and copy it back to Setup.in later.
-# (All this is done so you can distribute your extension easily and
-# someone else can select the modules they actually want to build by
-# commenting out lines in the Setup file, without editing the
-# original. Editing Setup is also used to specify nonstandard
-# locations for include or library files.)
-
-# Copy this file (Misc/Makefile.pre.in) to the directory containing
-# your extension.
-
-# Run "make -f Makefile.pre.in boot". This creates Makefile
-# (producing Makefile.pre and sedscript as intermediate files) and
-# config.c, incorporating the values for sys.prefix, sys.exec_prefix
-# and sys.version from the installed Python binary. For this to work,
-# the python binary must be on your path. If this fails, try
-# make -f Makefile.pre.in Makefile VERSION=1.5 installdir=<prefix>
-# where <prefix> is the prefix used to install Python for installdir
-# (and possibly similar for exec_installdir=<exec_prefix>).
-
-# Note: "make boot" implies "make clobber" -- it assumes that when you
-# bootstrap you may have changed platforms so it removes all previous
-# output files.
-
-# If you are building your extension as a shared library (your
-# Setup.in file starts with *shared*), run "make" or "make sharedmods"
-# to build the shared library files. If you are building a statically
-# linked Python binary (the only solution of your platform doesn't
-# support shared libraries, and sometimes handy if you want to
-# distribute or install the resulting Python binary), run "make
-# python".
-
-# Note: Each time you edit Makefile.pre.in or Setup, you must run
-# "make Makefile" before running "make".
-
-# Hint: if you want to use VPATH, you can start in an empty
-# subdirectory and say (e.g.):
-# make -f ../Makefile.pre.in boot srcdir=.. VPATH=..
-
-
-# === Bootstrap variables (edited through "make boot") ===
-
-# The prefix used by "make inclinstall libainstall" of core python
-installdir= /usr/local
-
-# The exec_prefix used by the same
-exec_installdir=$(installdir)
-
-# Source directory and VPATH in case you want to use VPATH.
-# (You will have to edit these two lines yourself -- there is no
-# automatic support as the Makefile is not generated by
-# config.status.)
-srcdir= .
-VPATH= .
-
-# === Variables that you may want to customize (rarely) ===
-
-# (Static) build target
-TARGET= python
-
-# Installed python binary (used only by boot target)
-PYTHON= python
-
-# Add more -I and -D options here
-CFLAGS= $(OPT) -I$(INCLUDEPY) -I$(EXECINCLUDEPY) $(DEFS)
-
-# These two variables can be set in Setup to merge extensions.
-# See example[23].
-BASELIB=
-BASESETUP=
-
-# === Variables set by makesetup ===
-
-MODOBJS= _MODOBJS_
-MODLIBS= _MODLIBS_
-
-# === Definitions added by makesetup ===
-
-# === Variables from configure (through sedscript) ===
-
-VERSION= @VERSION@
-CC= @CC@
-LINKCC= @LINKCC@
-SGI_ABI= @SGI_ABI@
-OPT= @OPT@
-LDFLAGS= @LDFLAGS@
-LDLAST= @LDLAST@
-DEFS= @DEFS@
-LIBS= @LIBS@
-LIBM= @LIBM@
-LIBC= @LIBC@
-RANLIB= @RANLIB@
-MACHDEP= @MACHDEP@
-SO= @SO@
-LDSHARED= @LDSHARED@
-CCSHARED= @CCSHARED@
-LINKFORSHARED= @LINKFORSHARED@
-#@SET_CCC@
-
-# Install prefix for architecture-independent files
-prefix= /usr/local
-
-# Install prefix for architecture-dependent files
-exec_prefix= $(prefix)
-
-# === Fixed definitions ===
-
-# Shell used by make (some versions default to the login shell, which is bad)
-SHELL= /bin/sh
-
-# Expanded directories
-BINDIR= $(exec_installdir)/bin
-LIBDIR= $(exec_prefix)/lib
-MANDIR= $(installdir)/man
-INCLUDEDIR= $(installdir)/include
-SCRIPTDIR= $(prefix)/lib
-
-# Detailed destination directories
-BINLIBDEST= $(LIBDIR)/python$(VERSION)
-LIBDEST= $(SCRIPTDIR)/python$(VERSION)
-INCLUDEPY= $(INCLUDEDIR)/python$(VERSION)
-EXECINCLUDEPY= $(exec_installdir)/include/python$(VERSION)
-LIBP= $(exec_installdir)/lib/python$(VERSION)
-DESTSHARED= $(BINLIBDEST)/site-packages
-
-LIBPL= $(LIBP)/config
-
-PYTHONLIBS= $(LIBPL)/libpython$(VERSION).a
-
-MAKESETUP= $(LIBPL)/makesetup
-MAKEFILE= $(LIBPL)/Makefile
-CONFIGC= $(LIBPL)/config.c
-CONFIGCIN= $(LIBPL)/config.c.in
-SETUP= $(LIBPL)/Setup
-
-SYSLIBS= $(LIBM) $(LIBC)
-
-ADDOBJS= $(LIBPL)/python.o config.o
-
-# Portable install script (configure doesn't always guess right)
-INSTALL= $(LIBPL)/install-sh -c
-# Shared libraries must be installed with executable mode on some systems;
-# rather than figuring out exactly which, we always give them executable mode.
-# Also, making them read-only seems to be a good idea...
-INSTALL_SHARED= ${INSTALL} -m 555
-
-#---------------------------------------------------
-# Possibly change some definintions for C++
-ifdef MY_LDSHARED
-LDSHARED=$(MY_LDSHARED)
-endif
-ifdef MY_LINKCC
-LINKCC=$(MY_LINKCC)
-endif
-
-
-# === Fixed rules ===
-
-# Default target. This builds shared libraries only
-default: sharedmods
-
-# Build everything
-all: static sharedmods
-
-# Build shared libraries from our extension modules
-sharedmods: $(SHAREDMODS)
-
-# Build a static Python binary containing our extension modules
-static: $(TARGET)
-$(TARGET): $(ADDOBJS) lib.a $(PYTHONLIBS) Makefile $(BASELIB)
- $(LINKCC) $(LDFLAGS) $(LINKFORSHARED) \
- $(ADDOBJS) lib.a $(PYTHONLIBS) \
- $(LINKPATH) $(BASELIB) $(MODLIBS) $(LIBS) $(SYSLIBS) \
- -o $(TARGET) $(LDLAST)
-
-#------------------------------------------------------------------------
-#------------------------------------------------------------------------
-# This is a default version of the install target for wxPython. It just
-# redirects to wxInstall below...
-
-install: wxInstall
-
-#install: sharedmods
-# if test ! -d $(DESTSHARED) ; then \
-# mkdir $(DESTSHARED) ; else true ; fi
-# -for i in X $(SHAREDMODS); do \
-# if test $$i != X; \
-# then $(INSTALL_SHARED) $$i $(DESTSHARED)/$$i; \
-# fi; \
-# done
-
-
-# Build the library containing our extension modules
-lib.a: $(MODOBJS)
- -rm -f lib.a
- ar cr lib.a $(MODOBJS)
- -$(RANLIB) lib.a
-
-# This runs makesetup *twice* to use the BASESETUP definition from Setup
-config.c Makefile: Makefile.pre Setup $(BASESETUP) $(MAKESETUP)
- $(MAKESETUP) \
- -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
- $(MAKE) -f Makefile do-it-again
-
-# Internal target to run makesetup for the second time
-do-it-again:
- $(MAKESETUP) \
- -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
-
-# Make config.o from the config.c created by makesetup
-config.o: config.c
- $(CC) $(CFLAGS) -c config.c
-
-# Setup is copied from Setup.in *only* if it doesn't yet exist
-Setup:
- cp Setup.in Setup
-
-# Make the intermediate Makefile.pre from Makefile.pre.in
-Makefile.pre: Makefile.pre.in sedscript
- sed -f sedscript Makefile.pre.in >Makefile.pre
-
-# Shortcuts to make the sed arguments on one line
-P=prefix
-E=exec_prefix
-H=Generated automatically from Makefile.pre.in by sedscript.
-L=LINKFORSHARED
-
-# Make the sed script used to create Makefile.pre from Makefile.pre.in
-sedscript: $(MAKEFILE)
- sed -n \
- -e '1s/.*/1i\\/p' \
- -e '2s%.*%# $H%p' \
- -e '/^VERSION=/s/^VERSION=[ ]*\(.*\)/s%@VERSION[@]%\1%/p' \
- -e '/^CC=/s/^CC=[ ]*\(.*\)/s%@CC[@]%\1%/p' \
- -e '/^CCC=/s/^CCC=[ ]*\(.*\)/s%#@SET_CCC[@]%CCC=\1%/p' \
- -e '/^LINKCC=/s/^LINKCC=[ ]*\(.*\)/s%@LINKCC[@]%\1%/p' \
- -e '/^OPT=/s/^OPT=[ ]*\(.*\)/s%@OPT[@]%\1%/p' \
- -e '/^LDFLAGS=/s/^LDFLAGS=[ ]*\(.*\)/s%@LDFLAGS[@]%\1%/p' \
- -e '/^DEFS=/s/^DEFS=[ ]*\(.*\)/s%@DEFS[@]%\1%/p' \
- -e '/^LIBS=/s/^LIBS=[ ]*\(.*\)/s%@LIBS[@]%\1%/p' \
- -e '/^LIBM=/s/^LIBM=[ ]*\(.*\)/s%@LIBM[@]%\1%/p' \
- -e '/^LIBC=/s/^LIBC=[ ]*\(.*\)/s%@LIBC[@]%\1%/p' \
- -e '/^RANLIB=/s/^RANLIB=[ ]*\(.*\)/s%@RANLIB[@]%\1%/p' \
- -e '/^MACHDEP=/s/^MACHDEP=[ ]*\(.*\)/s%@MACHDEP[@]%\1%/p' \
- -e '/^SO=/s/^SO=[ ]*\(.*\)/s%@SO[@]%\1%/p' \
- -e '/^LDSHARED=/s/^LDSHARED=[ ]*\(.*\)/s%@LDSHARED[@]%\1%/p' \
- -e '/^CCSHARED=/s/^CCSHARED=[ ]*\(.*\)/s%@CCSHARED[@]%\1%/p' \
- -e '/^$L=/s/^$L=[ ]*\(.*\)/s%@$L[@]%\1%/p' \
- -e '/^$P=/s/^$P=\(.*\)/s%^$P=.*%$P=\1%/p' \
- -e '/^$E=/s/^$E=\(.*\)/s%^$E=.*%$E=\1%/p' \
- $(MAKEFILE) >sedscript
- echo "/^#@SET_CCC@/d" >>sedscript
- echo "/^installdir=/s%=.*%= $(installdir)%" >>sedscript
- echo "/^exec_installdir=/s%=.*%=$(exec_installdir)%" >>sedscript
- echo "/^srcdir=/s%=.*%= $(srcdir)%" >>sedscript
- echo "/^VPATH=/s%=.*%= $(VPATH)%" >>sedscript
- echo "/^LINKPATH=/s%=.*%= $(LINKPATH)%" >>sedscript
- echo "/^BASELIB=/s%=.*%= $(BASELIB)%" >>sedscript
- echo "/^BASESETUP=/s%=.*%= $(BASESETUP)%" >>sedscript
-
-# Bootstrap target
-boot: clobber
- VERSION=`$(PYTHON) -c "import sys; print sys.version[:3]"`; \
- installdir=`$(PYTHON) -c "import sys; print sys.prefix"`; \
- exec_installdir=`$(PYTHON) -c "import sys; print sys.exec_prefix"`; \
- $(MAKE) -f Makefile.pre.in VPATH=$(VPATH) srcdir=$(srcdir) \
- VERSION=$$VERSION \
- installdir=$$installdir \
- exec_installdir=$$exec_installdir \
- Makefile
-
-# Handy target to remove intermediate files and backups
-clean:
- -rm -f *.o *~
-
-# Handy target to remove everything that is easily regenerated
-clobber: clean
- -rm -f *.a tags TAGS config.c Makefile.pre $(TARGET) sedscript
- -rm -f *.so *.sl so_locations
-
-
-# Handy target to remove everything you don't want to distribute
-distclean: clobber
- -rm -f Makefile Setup
-
-
-
-
-#------------------------------------------------------------------------
-#------------------------------------------------------------------------
-# Custom rules and dependencies added for wxPython
-#
-
-WXP_VERSION=2.1b2
-
-# WXP_SRCDIR=../wxPython/src
-
-SWIGFLAGS=-c++ -shadow -python -dnone -I$(WXP_SRCDIR) -D__WXGTK__ $(SEPARATE)
-
-
-# Implicit rules to run SWIG
-$(GENCODEDIR)/%.cpp : %.i
- swig $(SWIGFLAGS) -c -o $@ $<
-
-$(GENCODEDIR)/%.py : %.i
- swig $(SWIGFLAGS) -c -o $@ $<
-$(GENCODEDIR)/%.py : %.i
- swig $(SWIGFLAGS) -c -o $(GENCODEDIR)/tmp_wrap.cpp $<
- rm $(GENCODEDIR)/tmp_wrap.cpp
-
-
-wxInstall : sharedmods $(PYMODULES)
- if test ! -d $(TARGETDIR) ; then \
- mkdir $(TARGETDIR) ; else true ; fi
- if [ "$(SHAREDMODS)" != "" ]; then \
- chmod 755 $(SHAREDMODS); \
- cp $(SHAREDMODS) $(TARGETDIR); fi
- -for i in $(PYMODULES); do \
- cp $$i $(TARGETDIR); \
- done
- if [ "$(TARGETDIR)" != ".." ]; then \
- python $(LIBDEST)/compileall.py $(TARGETDIR); \
- python -O $(LIBDEST)/compileall.py $(TARGETDIR); \
- else \
- python $(LIBDEST)/compileall.py -l $(TARGETDIR); \
- python -O $(LIBDEST)/compileall.py -l $(TARGETDIR);\
- fi
-
-
-
+++ /dev/null
-## This file gives the details of what is needed to build this extension
-## module so the Makefile can be created.
-
-## If you have not done "make install" for wxWindows then see Setup.in.linux
-## for a more verbose version of this file.
-
-*shared*
-
-CCC=c++
-WXWIN=../../..
-GENCODEDIR=gtk
-# srcdir=$(GENCODEDIR)
-WX_CONFIG_CFLAGS=`wx-config --cflags`
-WX_CONFIG_LIBS=`wx-config --libs`
-
-
-## Depending on how your Python was built, you may have to set this
-## value to use the C++ driver to link with instead of the default
-## C driver. For example:
-MY_LDSHARED=$(CCC) -shared
-
-## Same as above, but for statically linking Python and wxPython together,
-## in other words, if you comment out the *shared* above. If this is the
-## case then you should ensure that the main() function is Python's, not
-## wxWindows'. You can rebuild $(WXWIN)/src/gtk/app.cpp with NOMAIN defined
-## to force this...
-MY_LINKCC=$(CCC)
-
-
-## Pick one of these, or set your own. This is where the wxPython module
-## should be installed. It should be a subdirectory named wxPython.
-#TARGETDIR=..
-TARGETDIR=$(BINLIBDEST)/site-packages/wxPython
-
-# The location of the wxPython source dir
-WXP_SRCDIR=../../src
-
-C_DEFINES = -DSWIG_GLOBAL -DWXP_USE_THREAD -DSEPARATE
-C_FLAGS = -I. -I$(WXP_SRCDIR) $(WX_CONFIG_CFLAGS)
-C_LIBS = -lwxPyHelpers $(WX_CONFIG_LIBS)
-
-PYMODULES = $(GENCODEDIR)/html.py htmlhelper.py
-
-htmlc $(GENCODEDIR)/html.cpp \
- $(C_DEFINES) $(C_FLAGS) -Xlinker $(C_LIBS)
+++ /dev/null
-
-#----------------------------------------------------------------------
-
-TARGET = htmlc
-
-OBJECTS = html.obj
-
-PYMODULES = $(TARGETDIR)\html.py $(TARGETDIR)\htmlhelper.py
-
-SOURCES = $(GENCODEDIR)\html.cpp
-
-
-#----------------------------------------------------------------------
-
-!include ..\makeinc.vc
-
-#----------------------------------------------------------------------
-
-default: $(TARGETDIR)\$(TARGET).pyd pycfiles
-
-all: $(TARGET)
-
-# for generating the html.cpp file
-$(GENCODEDIR)/html.cpp : html.i
-
-#----------------------------------------------------------------------
-
-$(TARGETDIR)\$(TARGET).pyd : $(DUMMYOBJ) $(WXLIB) $(OBJECTS) # $(TARGET).res
- $(link) @<<
-/out:$@ /dll
-$(LFLAGS) /def:$(TARGET).def /implib:./$(TARGET).lib
-$(DUMMYOBJ) $(OBJECTS)
-$(LIBS)
-<<
-
-
-#----------------------------------------------------------------------
-
+++ /dev/null
-# Universal Unix Makefile for Python extensions
-# =============================================
-
-# Short Instructions
-# ------------------
-
-# 1. Build and install Python (1.5 or newer).
-# 2. "make -f Makefile.pre.in boot"
-# 3. "make"
-# You should now have a shared library.
-
-# Long Instructions
-# -----------------
-
-# Build *and install* the basic Python 1.5 distribution. See the
-# Python README for instructions. (This version of Makefile.pre.in
-# only withs with Python 1.5, alpha 3 or newer.)
-
-# Create a file Setup.in for your extension. This file follows the
-# format of the Modules/Setup.in file; see the instructions there.
-# For a simple module called "spam" on file "spammodule.c", it can
-# contain a single line:
-# spam spammodule.c
-# You can build as many modules as you want in the same directory --
-# just have a separate line for each of them in the Setup.in file.
-
-# If you want to build your extension as a shared library, insert a
-# line containing just the string
-# *shared*
-# at the top of your Setup.in file.
-
-# Note that the build process copies Setup.in to Setup, and then works
-# with Setup. It doesn't overwrite Setup when Setup.in is changed, so
-# while you're in the process of debugging your Setup.in file, you may
-# want to edit Setup instead, and copy it back to Setup.in later.
-# (All this is done so you can distribute your extension easily and
-# someone else can select the modules they actually want to build by
-# commenting out lines in the Setup file, without editing the
-# original. Editing Setup is also used to specify nonstandard
-# locations for include or library files.)
-
-# Copy this file (Misc/Makefile.pre.in) to the directory containing
-# your extension.
-
-# Run "make -f Makefile.pre.in boot". This creates Makefile
-# (producing Makefile.pre and sedscript as intermediate files) and
-# config.c, incorporating the values for sys.prefix, sys.exec_prefix
-# and sys.version from the installed Python binary. For this to work,
-# the python binary must be on your path. If this fails, try
-# make -f Makefile.pre.in Makefile VERSION=1.5 installdir=<prefix>
-# where <prefix> is the prefix used to install Python for installdir
-# (and possibly similar for exec_installdir=<exec_prefix>).
-
-# Note: "make boot" implies "make clobber" -- it assumes that when you
-# bootstrap you may have changed platforms so it removes all previous
-# output files.
-
-# If you are building your extension as a shared library (your
-# Setup.in file starts with *shared*), run "make" or "make sharedmods"
-# to build the shared library files. If you are building a statically
-# linked Python binary (the only solution of your platform doesn't
-# support shared libraries, and sometimes handy if you want to
-# distribute or install the resulting Python binary), run "make
-# python".
-
-# Note: Each time you edit Makefile.pre.in or Setup, you must run
-# "make Makefile" before running "make".
-
-# Hint: if you want to use VPATH, you can start in an empty
-# subdirectory and say (e.g.):
-# make -f ../Makefile.pre.in boot srcdir=.. VPATH=..
-
-
-# === Bootstrap variables (edited through "make boot") ===
-
-# The prefix used by "make inclinstall libainstall" of core python
-installdir= /usr/local
-
-# The exec_prefix used by the same
-exec_installdir=$(installdir)
-
-# Source directory and VPATH in case you want to use VPATH.
-# (You will have to edit these two lines yourself -- there is no
-# automatic support as the Makefile is not generated by
-# config.status.)
-srcdir= .
-VPATH= .
-
-# === Variables that you may want to customize (rarely) ===
-
-# (Static) build target
-TARGET= python
-
-# Installed python binary (used only by boot target)
-PYTHON= python
-
-# Add more -I and -D options here
-CFLAGS= $(OPT) -I$(INCLUDEPY) -I$(EXECINCLUDEPY) $(DEFS)
-
-# These two variables can be set in Setup to merge extensions.
-# See example[23].
-BASELIB=
-BASESETUP=
-
-# === Variables set by makesetup ===
-
-MODOBJS= _MODOBJS_
-MODLIBS= _MODLIBS_
-
-# === Definitions added by makesetup ===
-
-# === Variables from configure (through sedscript) ===
-
-VERSION= @VERSION@
-CC= @CC@
-LINKCC= @LINKCC@
-SGI_ABI= @SGI_ABI@
-OPT= @OPT@
-LDFLAGS= @LDFLAGS@
-LDLAST= @LDLAST@
-DEFS= @DEFS@
-LIBS= @LIBS@
-LIBM= @LIBM@
-LIBC= @LIBC@
-RANLIB= @RANLIB@
-MACHDEP= @MACHDEP@
-SO= @SO@
-LDSHARED= @LDSHARED@
-CCSHARED= @CCSHARED@
-LINKFORSHARED= @LINKFORSHARED@
-#@SET_CCC@
-
-# Install prefix for architecture-independent files
-prefix= /usr/local
-
-# Install prefix for architecture-dependent files
-exec_prefix= $(prefix)
-
-# === Fixed definitions ===
-
-# Shell used by make (some versions default to the login shell, which is bad)
-SHELL= /bin/sh
-
-# Expanded directories
-BINDIR= $(exec_installdir)/bin
-LIBDIR= $(exec_prefix)/lib
-MANDIR= $(installdir)/man
-INCLUDEDIR= $(installdir)/include
-SCRIPTDIR= $(prefix)/lib
-
-# Detailed destination directories
-BINLIBDEST= $(LIBDIR)/python$(VERSION)
-LIBDEST= $(SCRIPTDIR)/python$(VERSION)
-INCLUDEPY= $(INCLUDEDIR)/python$(VERSION)
-EXECINCLUDEPY= $(exec_installdir)/include/python$(VERSION)
-LIBP= $(exec_installdir)/lib/python$(VERSION)
-DESTSHARED= $(BINLIBDEST)/site-packages
-
-LIBPL= $(LIBP)/config
-
-PYTHONLIBS= $(LIBPL)/libpython$(VERSION).a
-
-MAKESETUP= $(LIBPL)/makesetup
-MAKEFILE= $(LIBPL)/Makefile
-CONFIGC= $(LIBPL)/config.c
-CONFIGCIN= $(LIBPL)/config.c.in
-SETUP= $(LIBPL)/Setup
-
-SYSLIBS= $(LIBM) $(LIBC)
-
-ADDOBJS= $(LIBPL)/python.o config.o
-
-# Portable install script (configure doesn't always guess right)
-INSTALL= $(LIBPL)/install-sh -c
-# Shared libraries must be installed with executable mode on some systems;
-# rather than figuring out exactly which, we always give them executable mode.
-# Also, making them read-only seems to be a good idea...
-INSTALL_SHARED= ${INSTALL} -m 555
-
-#---------------------------------------------------
-# Possibly change some definintions for C++
-ifdef MY_LDSHARED
-LDSHARED=$(MY_LDSHARED)
-endif
-ifdef MY_LINKCC
-LINKCC=$(MY_LINKCC)
-endif
-
-
-# === Fixed rules ===
-
-# Default target. This builds shared libraries only
-default: sharedmods
-
-# Build everything
-all: static sharedmods
-
-# Build shared libraries from our extension modules
-sharedmods: $(SHAREDMODS)
-
-# Build a static Python binary containing our extension modules
-static: $(TARGET)
-$(TARGET): $(ADDOBJS) lib.a $(PYTHONLIBS) Makefile $(BASELIB)
- $(LINKCC) $(LDFLAGS) $(LINKFORSHARED) \
- $(ADDOBJS) lib.a $(PYTHONLIBS) \
- $(LINKPATH) $(BASELIB) $(MODLIBS) $(LIBS) $(SYSLIBS) \
- -o $(TARGET) $(LDLAST)
-
-#------------------------------------------------------------------------
-#------------------------------------------------------------------------
-# This is a default version of the install target for wxPython. It just
-# redirects to wxInstall below...
-
-install: wxInstall
-
-#install: sharedmods
-# if test ! -d $(DESTSHARED) ; then \
-# mkdir $(DESTSHARED) ; else true ; fi
-# -for i in X $(SHAREDMODS); do \
-# if test $$i != X; \
-# then $(INSTALL_SHARED) $$i $(DESTSHARED)/$$i; \
-# fi; \
-# done
-
-
-# Build the library containing our extension modules
-lib.a: $(MODOBJS)
- -rm -f lib.a
- ar cr lib.a $(MODOBJS)
- -$(RANLIB) lib.a
-
-# This runs makesetup *twice* to use the BASESETUP definition from Setup
-config.c Makefile: Makefile.pre Setup $(BASESETUP) $(MAKESETUP)
- $(MAKESETUP) \
- -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
- $(MAKE) -f Makefile do-it-again
-
-# Internal target to run makesetup for the second time
-do-it-again:
- $(MAKESETUP) \
- -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
-
-# Make config.o from the config.c created by makesetup
-config.o: config.c
- $(CC) $(CFLAGS) -c config.c
-
-# Setup is copied from Setup.in *only* if it doesn't yet exist
-Setup:
- cp Setup.in Setup
-
-# Make the intermediate Makefile.pre from Makefile.pre.in
-Makefile.pre: Makefile.pre.in sedscript
- sed -f sedscript Makefile.pre.in >Makefile.pre
-
-# Shortcuts to make the sed arguments on one line
-P=prefix
-E=exec_prefix
-H=Generated automatically from Makefile.pre.in by sedscript.
-L=LINKFORSHARED
-
-# Make the sed script used to create Makefile.pre from Makefile.pre.in
-sedscript: $(MAKEFILE)
- sed -n \
- -e '1s/.*/1i\\/p' \
- -e '2s%.*%# $H%p' \
- -e '/^VERSION=/s/^VERSION=[ ]*\(.*\)/s%@VERSION[@]%\1%/p' \
- -e '/^CC=/s/^CC=[ ]*\(.*\)/s%@CC[@]%\1%/p' \
- -e '/^CCC=/s/^CCC=[ ]*\(.*\)/s%#@SET_CCC[@]%CCC=\1%/p' \
- -e '/^LINKCC=/s/^LINKCC=[ ]*\(.*\)/s%@LINKCC[@]%\1%/p' \
- -e '/^OPT=/s/^OPT=[ ]*\(.*\)/s%@OPT[@]%\1%/p' \
- -e '/^LDFLAGS=/s/^LDFLAGS=[ ]*\(.*\)/s%@LDFLAGS[@]%\1%/p' \
- -e '/^DEFS=/s/^DEFS=[ ]*\(.*\)/s%@DEFS[@]%\1%/p' \
- -e '/^LIBS=/s/^LIBS=[ ]*\(.*\)/s%@LIBS[@]%\1%/p' \
- -e '/^LIBM=/s/^LIBM=[ ]*\(.*\)/s%@LIBM[@]%\1%/p' \
- -e '/^LIBC=/s/^LIBC=[ ]*\(.*\)/s%@LIBC[@]%\1%/p' \
- -e '/^RANLIB=/s/^RANLIB=[ ]*\(.*\)/s%@RANLIB[@]%\1%/p' \
- -e '/^MACHDEP=/s/^MACHDEP=[ ]*\(.*\)/s%@MACHDEP[@]%\1%/p' \
- -e '/^SO=/s/^SO=[ ]*\(.*\)/s%@SO[@]%\1%/p' \
- -e '/^LDSHARED=/s/^LDSHARED=[ ]*\(.*\)/s%@LDSHARED[@]%\1%/p' \
- -e '/^CCSHARED=/s/^CCSHARED=[ ]*\(.*\)/s%@CCSHARED[@]%\1%/p' \
- -e '/^$L=/s/^$L=[ ]*\(.*\)/s%@$L[@]%\1%/p' \
- -e '/^$P=/s/^$P=\(.*\)/s%^$P=.*%$P=\1%/p' \
- -e '/^$E=/s/^$E=\(.*\)/s%^$E=.*%$E=\1%/p' \
- $(MAKEFILE) >sedscript
- echo "/^#@SET_CCC@/d" >>sedscript
- echo "/^installdir=/s%=.*%= $(installdir)%" >>sedscript
- echo "/^exec_installdir=/s%=.*%=$(exec_installdir)%" >>sedscript
- echo "/^srcdir=/s%=.*%= $(srcdir)%" >>sedscript
- echo "/^VPATH=/s%=.*%= $(VPATH)%" >>sedscript
- echo "/^LINKPATH=/s%=.*%= $(LINKPATH)%" >>sedscript
- echo "/^BASELIB=/s%=.*%= $(BASELIB)%" >>sedscript
- echo "/^BASESETUP=/s%=.*%= $(BASESETUP)%" >>sedscript
-
-# Bootstrap target
-boot: clobber
- VERSION=`$(PYTHON) -c "import sys; print sys.version[:3]"`; \
- installdir=`$(PYTHON) -c "import sys; print sys.prefix"`; \
- exec_installdir=`$(PYTHON) -c "import sys; print sys.exec_prefix"`; \
- $(MAKE) -f Makefile.pre.in VPATH=$(VPATH) srcdir=$(srcdir) \
- VERSION=$$VERSION \
- installdir=$$installdir \
- exec_installdir=$$exec_installdir \
- Makefile
-
-# Handy target to remove intermediate files and backups
-clean:
- -rm -f *.o *~
-
-# Handy target to remove everything that is easily regenerated
-clobber: clean
- -rm -f *.a tags TAGS config.c Makefile.pre $(TARGET) sedscript
- -rm -f *.so *.sl so_locations
-
-
-# Handy target to remove everything you don't want to distribute
-distclean: clobber
- -rm -f Makefile Setup
-
-
-
-
-#------------------------------------------------------------------------
-#------------------------------------------------------------------------
-# Custom rules and dependencies added for wxPython
-#
-
-WXP_VERSION=2.1b2
-
-# WXP_SRCDIR=../wxPython/src
-
-SWIGFLAGS=-c++ -shadow -python -dnone -I$(WXP_SRCDIR) -D__WXGTK__ $(SEPARATE)
-
-
-# Implicit rules to run SWIG
-$(GENCODEDIR)/%.cpp : %.i
- swig $(SWIGFLAGS) -c -o $@ $<
-
-$(GENCODEDIR)/%.py : %.i
- swig $(SWIGFLAGS) -c -o $@ $<
-$(GENCODEDIR)/%.py : %.i
- swig $(SWIGFLAGS) -c -o $(GENCODEDIR)/tmp_wrap.cpp $<
- rm $(GENCODEDIR)/tmp_wrap.cpp
-
-
-wxInstall : sharedmods $(PYMODULES)
- if test ! -d $(TARGETDIR) ; then \
- mkdir $(TARGETDIR) ; else true ; fi
- if [ "$(SHAREDMODS)" != "" ]; then \
- chmod 755 $(SHAREDMODS); \
- cp $(SHAREDMODS) $(TARGETDIR); fi
- -for i in $(PYMODULES); do \
- cp $$i $(TARGETDIR); \
- done
- if [ "$(TARGETDIR)" != ".." ]; then \
- python $(LIBDEST)/compileall.py $(TARGETDIR); \
- python -O $(LIBDEST)/compileall.py $(TARGETDIR); \
- else \
- python $(LIBDEST)/compileall.py -l $(TARGETDIR); \
- python -O $(LIBDEST)/compileall.py -l $(TARGETDIR);\
- fi
-
-
-
+++ /dev/null
-## This file gives the details of what is needed to build this extension
-## module so the Makefile can be created.
-
-## If you have not done "make install" for wxWindows then see Setup.in.linux
-## for a more verbose version of this file.
-
-*shared*
-
-CCC=c++
-WXWIN=../../..
-GENCODEDIR=gtk
-# srcdir=$(GENCODEDIR)
-WX_CONFIG_CFLAGS=`wx-config --cflags`
-WX_CONFIG_LIBS=`wx-config --libs`
-
-
-## Depending on how your Python was built, you may have to set this
-## value to use the C++ driver to link with instead of the default
-## C driver. For example:
-MY_LDSHARED=$(CCC) -shared
-
-## Same as above, but for statically linking Python and wxPython together,
-## in other words, if you comment out the *shared* above. If this is the
-## case then you should ensure that the main() function is Python's, not
-## wxWindows'. You can rebuild $(WXWIN)/src/gtk/app.cpp with NOMAIN defined
-## to force this...
-MY_LINKCC=$(CCC)
-
-
-## Pick one of these, or set your own. This is where the wxPython module
-## should be installed. It should be a subdirectory named wxPython.
-#TARGETDIR=..
-TARGETDIR=$(BINLIBDEST)/site-packages/wxPython
-
-# The location of the wxPython source dir
-WXP_SRCDIR=../../src
-
-## define SEPARATE so that the individual modules 'know' at compile time
-## they're not going to be part of a big wxcmodule.so
-C_DEFINES = -DSWIG_GLOBAL -DWXP_USE_THREAD -DSEPARATE
-C_FLAGS = -I. -I$(WXP_SRCDIR) $(WX_CONFIG_CFLAGS)
-C_LIBS = -lwxPyHelpers $(WX_CONFIG_LIBS)
-
-PYMODULES = $(GENCODEDIR)/lseditor.py
-
-lseditorc $(GENCODEDIR)/lseditor.cpp finddlg.cpp lseditorpl.cpp markup.cpp \
- plugin.cpp sourcepainter.cpp tdefs.cpp \
- $(C_DEFINES) $(C_FLAGS) -Xlinker $(C_LIBS)
-
+++ /dev/null
-
-#----------------------------------------------------------------------
-
-TARGET = lseditorc
-
-OBJECTS = lseditor.obj finddlg.obj lseditorpl.obj markup.obj \
- plugin.obj sourcepainter.obj tdefs.objhtml.obj
-
-PYMODULES = $(TARGETDIR)\lseditor.py
-
-SOURCES = $(GENCODEDIR)/lseditor.cpp finddlg.cpp lseditorpl.cpp markup.cpp \
- plugin.cpp sourcepainter.cpp tdefs.cpp
-
-
-#----------------------------------------------------------------------
-
-!include ..\makeinc.vc
-# undo overrideflags /GX- ...
-OVERRIDEFLAGS=$(OTHERCFLAGS)
-
-#----------------------------------------------------------------------
-
-default: $(TARGETDIR)\$(TARGET).pyd pycfiles
-
-all: $(TARGET)
-
-# for generating the html.cpp file
-$(GENCODEDIR)/lseditor.cpp : lseditor.i
-
-#----------------------------------------------------------------------
-
-$(TARGETDIR)\$(TARGET).pyd : $(DUMMYOBJ) $(WXLIB) $(OBJECTS) # $(TARGET).res
- $(link) @<<
-/out:$@ /dll
-$(LFLAGS) /def:$(TARGET).def /implib:./$(TARGET).lib
-$(DUMMYOBJ) $(OBJECTS)
-$(LIBS)
-<<
-
-
-#----------------------------------------------------------------------
-
+++ /dev/null
-all:
- cd html
- nmake -f makefile.vc
- cd ..\lseditor
- nmake -f makefile.vc
- cd ..\glcanvas
- nmake -f makefile.vc
- cd ..
-
-
-clean:
- cd html
- nmake -f makefile.vc clean
- cd ..\lseditor
- nmake -f makefile.vc clean
- cd ..\glcanvas
- nmake -f makefile.vc clean
- cd ..
+++ /dev/null
-# -*- makefile -*-
-#----------------------------------------------------------------------------
-# Name: makefile.nt
-# Purpose: Win32, VC++ 5/6 makefile for wxPython
-#
-# Author: Robin Dunn
-#
-# Created: 3/27/97
-# RCS-ID: $Id$
-# Copyright: (c) 1998 by Total Control Software
-# Licence: wxWindows license
-#----------------------------------------------------------------------------
-VERSION=2.1b2
-
-# Set WXDIR to the root wxWindows directory for your system
-WXDIR = $(WXWIN)
-
-# Set this to the root of the Python installation
-PYTHONDIR=\progra~1\Python
-
-# Set this to 1 for a non-debug, optimised compile
-FINAL=1
-
-# Set this to where you want the stuff installed at. It should
-# be a directory contained in a PYTHONPATH directory, and should be
-# named wxPython
-TARGETDIR=$(PYTHONDIR)\wxPython
-
-# Set this to 1 for make to pre-compile the Python modules, 0 to
-# just copy the sources and let Python compile them the first
-# time they are imported.
-COMPILEPY=0
-
-# If your wxWindows is built as a DLL, set this to 1. Using 0 or unset
-# means that wxWindows will be staticaly linked with wxPython.
-WXUSINGDLL=1
-
-# If you want to compile in code to aquire/release the Python
-# Interpreter Lock at the appropriate places
-WXP_USE_THREAD=1
-
-
-#----------------------------------------------------------------------
-
-!if "$(WXP_USE_THREAD)" == "1"
-THREAD=-DWXP_USE_THREAD=1
-!endif
-
-#----------------------------------------------------------------------
-
-NOPCH=1
-THISDIR=$(WXDIR)\utils\wxPython\modules
-WXPSRCDIR=$(WXDIR)\utils\wxPython\src
-
-EXTRALIBS=$(PYTHONDIR)\libs\python15.lib $(WXPSRCDIR)\wxc.lib
-#EXTRALIBS=$(PYTHONDIR)\PCbuild\python15_d.lib -D_DEBUG
-EXTRAINC=-I$(PYTHONDIR)\include -I$(WXPSRCDIR) -I.
-EXTRAFLAGS=/Fpwxp.pch /YXhelpers.h -DSWIG_GLOBAL -DHAVE_CONFIG_H $(THREAD)
-OVERRIDEFLAGS=/GX- $(OTHERCFLAGS)
-
-
-SWIGFLAGS=-c++ -shadow -python -dnone -D__WXMSW__ -I$(WXPSRCDIR)
-GENCODEDIR=msw
-
-
-!include $(WXDIR)\src\makevc.env
-
-#----------------------------------------------------------------------
-
-!if "$(FINAL)" == "1"
-DEBUGLFLAGS = /DEBUG /INCREMENTAL:YES
-!else
-DEBUGLFLAGS = /INCREMENTAL:NO
-!endif
-
-LFLAGS= $(DEBUGLFLAGS) /DLL /subsystem:windows,3.50 /machine:I386 /nologo
-
-#----------------------------------------------------------------------
-
-def: default
-
-
-showflags:
- @echo $(CPPFLAGS)
-
-# implicit rule for compiling .cpp and .c files
-{}.cpp{}.obj:
- $(cc) @<<
-$(CPPFLAGS) /c /Tp $<
-<<
-
-{$(GENCODEDIR)}.cpp{}.obj:
- $(cc) @<<
-$(CPPFLAGS) /c /Tp $<
-<<
-
-{}.c{}.obj:
- $(cc) @<<
-$(CPPFLAGS) /c $<
-<<
-
-
-#------------------------------------------------------------------------
-
-.SUFFIXES : .i .py
-
-# Implicit rules to run SWIG
-{}.i{$(GENCODEDIR)}.cpp:
- swig $(SWIGFLAGS) -c -o $@ $<
-
-{}.i{$(GENCODEDIR)}.py:
- swig $(SWIGFLAGS) -c -o $(GENCODEDIR)\tmp_wrap.cpp $<
- -erase $(GENCODEDIR)\tmp_wrap.cpp
-
-
-{$(GENCODEDIR)}.py{$(TARGETDIR)}.py:
- copy $< $@
-
-{}.py{$(TARGETDIR)}.py:
- copy $< $@
-
-#{}.py{$(TARGETDIR)}.$(PYEXT):
-# $(PYTHON) -c "import py_compile; py_compile.compile('$<', '$@')"
-
-clean:
- -erase *.obj
- -erase *.exe
- -erase *.res
- -erase *.map
- -erase *.sbr
- -erase *.pdb
- -erase *.pch
- -erase $(TARGET).exp
- -erase $(TARGET).lib
-# -erase $(TARGETDIR)\$(TARGET).*
-
-dist:
- cd ..\..
- wxPython\distrib\zipit.bat $(VERSION)
-
-pycfiles : $(PYMODULES)
-!if "$(COMPILEPY)" == "1"
- $(PYTHONDIR)\python $(PYTHONDIR)\Lib\compileall.py -l $(TARGETDIR)
- $(PYTHONDIR)\python -O $(PYTHONDIR)\Lib\compileall.py -l $(TARGETDIR)
-!endif
-
-$(TARGET).res : $(TARGET).rc $(WXDIR)\include\wx\msw\wx.rc
- $(rc) -r /i$(WXDIR)\include -fo$@ $(TARGET).rc
-
-sources : $(SOURCES)
-
-#----------------------------------------------------------------------
+++ /dev/null
-# Universal Unix Makefile for Python extensions
-# =============================================
-
-# Short Instructions
-# ------------------
-
-# 1. Build and install Python (1.5 or newer).
-# 2. "make -f Makefile.pre.in boot"
-# 3. "make"
-# You should now have a shared library.
-
-# Long Instructions
-# -----------------
-
-# Build *and install* the basic Python 1.5 distribution. See the
-# Python README for instructions. (This version of Makefile.pre.in
-# only withs with Python 1.5, alpha 3 or newer.)
-
-# Create a file Setup.in for your extension. This file follows the
-# format of the Modules/Setup.in file; see the instructions there.
-# For a simple module called "spam" on file "spammodule.c", it can
-# contain a single line:
-# spam spammodule.c
-# You can build as many modules as you want in the same directory --
-# just have a separate line for each of them in the Setup.in file.
-
-# If you want to build your extension as a shared library, insert a
-# line containing just the string
-# *shared*
-# at the top of your Setup.in file.
-
-# Note that the build process copies Setup.in to Setup, and then works
-# with Setup. It doesn't overwrite Setup when Setup.in is changed, so
-# while you're in the process of debugging your Setup.in file, you may
-# want to edit Setup instead, and copy it back to Setup.in later.
-# (All this is done so you can distribute your extension easily and
-# someone else can select the modules they actually want to build by
-# commenting out lines in the Setup file, without editing the
-# original. Editing Setup is also used to specify nonstandard
-# locations for include or library files.)
-
-# Copy this file (Misc/Makefile.pre.in) to the directory containing
-# your extension.
-
-# Run "make -f Makefile.pre.in boot". This creates Makefile
-# (producing Makefile.pre and sedscript as intermediate files) and
-# config.c, incorporating the values for sys.prefix, sys.exec_prefix
-# and sys.version from the installed Python binary. For this to work,
-# the python binary must be on your path. If this fails, try
-# make -f Makefile.pre.in Makefile VERSION=1.5 installdir=<prefix>
-# where <prefix> is the prefix used to install Python for installdir
-# (and possibly similar for exec_installdir=<exec_prefix>).
-
-# Note: "make boot" implies "make clobber" -- it assumes that when you
-# bootstrap you may have changed platforms so it removes all previous
-# output files.
-
-# If you are building your extension as a shared library (your
-# Setup.in file starts with *shared*), run "make" or "make sharedmods"
-# to build the shared library files. If you are building a statically
-# linked Python binary (the only solution of your platform doesn't
-# support shared libraries, and sometimes handy if you want to
-# distribute or install the resulting Python binary), run "make
-# python".
-
-# Note: Each time you edit Makefile.pre.in or Setup, you must run
-# "make Makefile" before running "make".
-
-# Hint: if you want to use VPATH, you can start in an empty
-# subdirectory and say (e.g.):
-# make -f ../Makefile.pre.in boot srcdir=.. VPATH=..
-
-
-# === Bootstrap variables (edited through "make boot") ===
-
-# The prefix used by "make inclinstall libainstall" of core python
-installdir= /usr/local
-
-# The exec_prefix used by the same
-exec_installdir=$(installdir)
-
-# Source directory and VPATH in case you want to use VPATH.
-# (You will have to edit these two lines yourself -- there is no
-# automatic support as the Makefile is not generated by
-# config.status.)
-srcdir= .
-VPATH= .
-
-# === Variables that you may want to customize (rarely) ===
-
-# (Static) build target
-TARGET= python
-
-# Installed python binary (used only by boot target)
-PYTHON= python
-
-# Add more -I and -D options here
-CFLAGS= $(OPT) -I$(INCLUDEPY) -I$(EXECINCLUDEPY) $(DEFS)
-
-# These two variables can be set in Setup to merge extensions.
-# See example[23].
-BASELIB=
-BASESETUP=
-
-# === Variables set by makesetup ===
-
-MODOBJS= _MODOBJS_
-MODLIBS= _MODLIBS_
-
-# === Definitions added by makesetup ===
-
-# === Variables from configure (through sedscript) ===
-
-VERSION= @VERSION@
-CC= @CC@
-LINKCC= @LINKCC@
-SGI_ABI= @SGI_ABI@
-OPT= @OPT@
-LDFLAGS= @LDFLAGS@
-LDLAST= @LDLAST@
-DEFS= @DEFS@
-LIBS= @LIBS@
-LIBM= @LIBM@
-LIBC= @LIBC@
-RANLIB= @RANLIB@
-MACHDEP= @MACHDEP@
-SO= @SO@
-LDSHARED= @LDSHARED@
-CCSHARED= @CCSHARED@
-LINKFORSHARED= @LINKFORSHARED@
-#@SET_CCC@
-
-# Install prefix for architecture-independent files
-prefix= /usr/local
-
-# Install prefix for architecture-dependent files
-exec_prefix= $(prefix)
-
-# === Fixed definitions ===
-
-# Shell used by make (some versions default to the login shell, which is bad)
-SHELL= /bin/sh
-
-# Expanded directories
-BINDIR= $(exec_installdir)/bin
-LIBDIR= $(exec_prefix)/lib
-MANDIR= $(installdir)/man
-INCLUDEDIR= $(installdir)/include
-SCRIPTDIR= $(prefix)/lib
-
-# Detailed destination directories
-BINLIBDEST= $(LIBDIR)/python$(VERSION)
-LIBDEST= $(SCRIPTDIR)/python$(VERSION)
-INCLUDEPY= $(INCLUDEDIR)/python$(VERSION)
-EXECINCLUDEPY= $(exec_installdir)/include/python$(VERSION)
-LIBP= $(exec_installdir)/lib/python$(VERSION)
-DESTSHARED= $(BINLIBDEST)/site-packages
-
-LIBPL= $(LIBP)/config
-
-PYTHONLIBS= $(LIBPL)/libpython$(VERSION).a
-
-MAKESETUP= $(LIBPL)/makesetup
-MAKEFILE= $(LIBPL)/Makefile
-CONFIGC= $(LIBPL)/config.c
-CONFIGCIN= $(LIBPL)/config.c.in
-SETUP= $(LIBPL)/Setup
-
-SYSLIBS= $(LIBM) $(LIBC)
-
-ADDOBJS= $(LIBPL)/python.o config.o
-
-# Portable install script (configure doesn't always guess right)
-INSTALL= $(LIBPL)/install-sh -c
-# Shared libraries must be installed with executable mode on some systems;
-# rather than figuring out exactly which, we always give them executable mode.
-# Also, making them read-only seems to be a good idea...
-INSTALL_SHARED= ${INSTALL} -m 555
-
-#---------------------------------------------------
-# Possibly change some definintions for C++
-ifdef MY_LDSHARED
-LDSHARED=$(MY_LDSHARED)
-endif
-ifdef MY_LINKCC
-LINKCC=$(MY_LINKCC)
-endif
-
-
-# === Fixed rules ===
-
-# Default target. This builds shared libraries only
-default: sharedmods
-
-# Build everything
-all: static sharedmods
-
-# Build shared libraries from our extension modules
-sharedmods: $(SHAREDMODS)
-
-# Build a static Python binary containing our extension modules
-static: $(TARGET)
-$(TARGET): $(ADDOBJS) lib.a $(PYTHONLIBS) Makefile $(BASELIB)
- $(LINKCC) $(LDFLAGS) $(LINKFORSHARED) \
- $(ADDOBJS) lib.a $(PYTHONLIBS) \
- $(LINKPATH) $(BASELIB) $(MODLIBS) $(LIBS) $(SYSLIBS) \
- -o $(TARGET) $(LDLAST)
-
-#------------------------------------------------------------------------
-#------------------------------------------------------------------------
-# This is a default version of the install target for wxPython. It just
-# redirects to wxInstall below...
-
-install: wxInstall
-
-#install: sharedmods
-# if test ! -d $(DESTSHARED) ; then \
-# mkdir $(DESTSHARED) ; else true ; fi
-# -for i in X $(SHAREDMODS); do \
-# if test $$i != X; \
-# then $(INSTALL_SHARED) $$i $(DESTSHARED)/$$i; \
-# fi; \
-# done
-
-
-# Build the library containing our extension modules
-lib.a: $(MODOBJS)
- -rm -f lib.a
- ar cr lib.a $(MODOBJS)
- -$(RANLIB) lib.a
-
-# This runs makesetup *twice* to use the BASESETUP definition from Setup
-config.c Makefile: Makefile.pre Setup $(BASESETUP) $(MAKESETUP)
- $(MAKESETUP) \
- -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
- $(MAKE) -f Makefile do-it-again
-
-# Internal target to run makesetup for the second time
-do-it-again:
- $(MAKESETUP) \
- -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
-
-# Make config.o from the config.c created by makesetup
-config.o: config.c
- $(CC) $(CFLAGS) -c config.c
-
-# Setup is copied from Setup.in *only* if it doesn't yet exist
-Setup:
- cp Setup.in Setup
-
-# Make the intermediate Makefile.pre from Makefile.pre.in
-Makefile.pre: Makefile.pre.in sedscript
- sed -f sedscript Makefile.pre.in >Makefile.pre
-
-# Shortcuts to make the sed arguments on one line
-P=prefix
-E=exec_prefix
-H=Generated automatically from Makefile.pre.in by sedscript.
-L=LINKFORSHARED
-
-# Make the sed script used to create Makefile.pre from Makefile.pre.in
-sedscript: $(MAKEFILE)
- sed -n \
- -e '1s/.*/1i\\/p' \
- -e '2s%.*%# $H%p' \
- -e '/^VERSION=/s/^VERSION=[ ]*\(.*\)/s%@VERSION[@]%\1%/p' \
- -e '/^CC=/s/^CC=[ ]*\(.*\)/s%@CC[@]%\1%/p' \
- -e '/^CCC=/s/^CCC=[ ]*\(.*\)/s%#@SET_CCC[@]%CCC=\1%/p' \
- -e '/^LINKCC=/s/^LINKCC=[ ]*\(.*\)/s%@LINKCC[@]%\1%/p' \
- -e '/^OPT=/s/^OPT=[ ]*\(.*\)/s%@OPT[@]%\1%/p' \
- -e '/^LDFLAGS=/s/^LDFLAGS=[ ]*\(.*\)/s%@LDFLAGS[@]%\1%/p' \
- -e '/^DEFS=/s/^DEFS=[ ]*\(.*\)/s%@DEFS[@]%\1%/p' \
- -e '/^LIBS=/s/^LIBS=[ ]*\(.*\)/s%@LIBS[@]%\1%/p' \
- -e '/^LIBM=/s/^LIBM=[ ]*\(.*\)/s%@LIBM[@]%\1%/p' \
- -e '/^LIBC=/s/^LIBC=[ ]*\(.*\)/s%@LIBC[@]%\1%/p' \
- -e '/^RANLIB=/s/^RANLIB=[ ]*\(.*\)/s%@RANLIB[@]%\1%/p' \
- -e '/^MACHDEP=/s/^MACHDEP=[ ]*\(.*\)/s%@MACHDEP[@]%\1%/p' \
- -e '/^SO=/s/^SO=[ ]*\(.*\)/s%@SO[@]%\1%/p' \
- -e '/^LDSHARED=/s/^LDSHARED=[ ]*\(.*\)/s%@LDSHARED[@]%\1%/p' \
- -e '/^CCSHARED=/s/^CCSHARED=[ ]*\(.*\)/s%@CCSHARED[@]%\1%/p' \
- -e '/^$L=/s/^$L=[ ]*\(.*\)/s%@$L[@]%\1%/p' \
- -e '/^$P=/s/^$P=\(.*\)/s%^$P=.*%$P=\1%/p' \
- -e '/^$E=/s/^$E=\(.*\)/s%^$E=.*%$E=\1%/p' \
- $(MAKEFILE) >sedscript
- echo "/^#@SET_CCC@/d" >>sedscript
- echo "/^installdir=/s%=.*%= $(installdir)%" >>sedscript
- echo "/^exec_installdir=/s%=.*%=$(exec_installdir)%" >>sedscript
- echo "/^srcdir=/s%=.*%= $(srcdir)%" >>sedscript
- echo "/^VPATH=/s%=.*%= $(VPATH)%" >>sedscript
- echo "/^LINKPATH=/s%=.*%= $(LINKPATH)%" >>sedscript
- echo "/^BASELIB=/s%=.*%= $(BASELIB)%" >>sedscript
- echo "/^BASESETUP=/s%=.*%= $(BASESETUP)%" >>sedscript
-
-# Bootstrap target
-boot: clobber
- VERSION=`$(PYTHON) -c "import sys; print sys.version[:3]"`; \
- installdir=`$(PYTHON) -c "import sys; print sys.prefix"`; \
- exec_installdir=`$(PYTHON) -c "import sys; print sys.exec_prefix"`; \
- $(MAKE) -f Makefile.pre.in VPATH=$(VPATH) srcdir=$(srcdir) \
- VERSION=$$VERSION \
- installdir=$$installdir \
- exec_installdir=$$exec_installdir \
- Makefile
-
-# Handy target to remove intermediate files and backups
-clean:
- -rm -f *.o *~
-
-# Handy target to remove everything that is easily regenerated
-clobber: clean
- -rm -f *.a tags TAGS config.c Makefile.pre $(TARGET) sedscript
- -rm -f *.so *.sl so_locations
-
-
-# Handy target to remove everything you don't want to distribute
-distclean: clobber
- -rm -f Makefile Setup
-
-
-
-
-#------------------------------------------------------------------------
-#------------------------------------------------------------------------
-# Custom rules and dependencies added for wxPython
-#
-
-WXP_VERSION=2.1b2
-
-# WXP_SRCDIR=../wxPython/src
-
-SWIGFLAGS=-c++ -shadow -python -dnone -I$(WXP_SRCDIR) -D__WXGTK__ $(SEPARATE)
-
-
-# Implicit rules to run SWIG
-$(GENCODEDIR)/%.cpp : %.i
- swig $(SWIGFLAGS) -c -o $@ $<
-
-$(GENCODEDIR)/%.py : %.i
- swig $(SWIGFLAGS) -c -o $@ $<
-$(GENCODEDIR)/%.py : %.i
- swig $(SWIGFLAGS) -c -o $(GENCODEDIR)/tmp_wrap.cpp $<
- rm $(GENCODEDIR)/tmp_wrap.cpp
-
-
-wxInstall : sharedmods $(PYMODULES)
- if test ! -d $(TARGETDIR) ; then \
- mkdir $(TARGETDIR) ; else true ; fi
- if [ "$(SHAREDMODS)" != "" ]; then \
- chmod 755 $(SHAREDMODS); \
- cp $(SHAREDMODS) $(TARGETDIR); fi
- -for i in $(PYMODULES); do \
- cp $$i $(TARGETDIR); \
- done
- if [ "$(TARGETDIR)" != ".." ]; then \
- python $(LIBDEST)/compileall.py $(TARGETDIR); \
- python -O $(LIBDEST)/compileall.py $(TARGETDIR); \
- else \
- python $(LIBDEST)/compileall.py -l $(TARGETDIR); \
- python -O $(LIBDEST)/compileall.py -l $(TARGETDIR);\
- fi
-
-
-
+++ /dev/null
-## This file gives the details of what is needed to build this extension
-## module so the Makefile can be created.
-
-## If you have not done "make install" for wxWindows then see Setup.in.linux
-## for a more verbose version of this file.
-
-*shared*
-
-CCC=c++
-WXWIN=../../..
-GENCODEDIR=gtk
-# srcdir=$(GENCODEDIR)
-WX_CONFIG_CFLAGS=`wx-config --cflags`
-WX_CONFIG_LIBS=`wx-config --libs`
-
-
-## Depending on how your Python was built, you may have to set this
-## value to use the C++ driver to link with instead of the default
-## C driver. For example:
-MY_LDSHARED=$(CCC) -shared
-
-## Same as above, but for statically linking Python and wxPython together,
-## in other words, if you comment out the *shared* above. If this is the
-## case then you should ensure that the main() function is Python's, not
-## wxWindows'. You can rebuild $(WXWIN)/src/gtk/app.cpp with NOMAIN defined
-## to force this...
-MY_LINKCC=$(CCC)
-
-#--------------------------------------------------------------------
-#
-# Below follow settings that may be specific for a wxPython module
-#
-#--------------------------------------------------------------------
-
-## Pick one of these, or set your own. This is where the wxPython module
-## should be installed. It should be a subdirectory named wxPython.
-#TARGETDIR=../..
-TARGETDIR=$(BINLIBDEST)/site-packages/wxPython
-
-# The location of the wxPython source dir
-WXP_SRCDIR=../../src
-
-# These defines are usually best left alone
-C_DEFINES = -DSWIG_GLOBAL -DWXP_USE_THREAD -DSEPARATE
-C_FLAGS = -I. -I$(WXP_SRCDIR) $(WX_CONFIG_CFLAGS)
-C_LIBS = -lwxPyHelpers $(WX_CONFIG_LIBS)
-
-PYMODULES = $(GENCODEDIR)/sample.py
-
-samplec $(GENCODEDIR)/sample.cpp mywidget.cpp \
- $(C_DEFINES) $(C_FLAGS) -Xlinker $(C_LIBS)
+++ /dev/null
-
-#----------------------------------------------------------------------
-
-TARGET = samplec
-
-OBJECTS = sample.obj mywidget.obj
-
-PYMODULES = $(TARGETDIR)\sample.py
-
-SOURCES = $(GENCODEDIR)\sample.cpp mywidget.cpp
-
-
-#----------------------------------------------------------------------
-
-!include ..\makeinc.vc
-
-#----------------------------------------------------------------------
-
-default: $(TARGETDIR)\$(TARGET).pyd pycfiles
-
-all: $(TARGET)
-
-# dependency to automatically generate swig files
-$(GENCODEDIR)/sample.cpp : sample.i
-
-#----------------------------------------------------------------------
-
-$(TARGETDIR)\$(TARGET).pyd : $(DUMMYOBJ) $(WXLIB) $(OBJECTS) # $(TARGET).res
- $(link) @<<
-/out:$@ /dll
-$(LFLAGS) /def:$(TARGET).def /implib:./$(TARGET).lib
-$(DUMMYOBJ) $(OBJECTS)
-$(LIBS)
-<<
-
-
-#----------------------------------------------------------------------
-
+++ /dev/null
-# -*- makefile -*-
-# Universal Unix Makefile for Python extensions
-# =============================================
-
-# Short Instructions
-# ------------------
-
-# 1. Build and install Python (1.5 or newer).
-# 2. "make -f Makefile.pre.in boot"
-# 3. "make"
-# You should now have a shared library.
-
-# Long Instructions
-# -----------------
-
-# Build *and install* the basic Python 1.5 distribution. See the
-# Python README for instructions. (This version of Makefile.pre.in
-# only withs with Python 1.5, alpha 3 or newer.)
-
-# Create a file Setup.in for your extension. This file follows the
-# format of the Modules/Setup.in file; see the instructions there.
-# For a simple module called "spam" on file "spammodule.c", it can
-# contain a single line:
-# spam spammodule.c
-# You can build as many modules as you want in the same directory --
-# just have a separate line for each of them in the Setup.in file.
-
-# If you want to build your extension as a shared library, insert a
-# line containing just the string
-# *shared*
-# at the top of your Setup.in file.
-
-# Note that the build process copies Setup.in to Setup, and then works
-# with Setup. It doesn't overwrite Setup when Setup.in is changed, so
-# while you're in the process of debugging your Setup.in file, you may
-# want to edit Setup instead, and copy it back to Setup.in later.
-# (All this is done so you can distribute your extension easily and
-# someone else can select the modules they actually want to build by
-# commenting out lines in the Setup file, without editing the
-# original. Editing Setup is also used to specify nonstandard
-# locations for include or library files.)
-
-# Copy this file (Misc/Makefile.pre.in) to the directory containing
-# your extension.
-
-# Run "make -f Makefile.pre.in boot". This creates Makefile
-# (producing Makefile.pre and sedscript as intermediate files) and
-# config.c, incorporating the values for sys.prefix, sys.exec_prefix
-# and sys.version from the installed Python binary. For this to work,
-# the python binary must be on your path. If this fails, try
-# make -f Makefile.pre.in Makefile VERSION=1.5 installdir=<prefix>
-# where <prefix> is the prefix used to install Python for installdir
-# (and possibly similar for exec_installdir=<exec_prefix>).
-
-# Note: "make boot" implies "make clobber" -- it assumes that when you
-# bootstrap you may have changed platforms so it removes all previous
-# output files.
-
-# If you are building your extension as a shared library (your
-# Setup.in file starts with *shared*), run "make" or "make sharedmods"
-# to build the shared library files. If you are building a statically
-# linked Python binary (the only solution of your platform doesn't
-# support shared libraries, and sometimes handy if you want to
-# distribute or install the resulting Python binary), run "make
-# python".
-
-# Note: Each time you edit Makefile.pre.in or Setup, you must run
-# "make Makefile" before running "make".
-
-# Hint: if you want to use VPATH, you can start in an empty
-# subdirectory and say (e.g.):
-# make -f ../Makefile.pre.in boot srcdir=.. VPATH=..
-
-
-# === Bootstrap variables (edited through "make boot") ===
-
-# The prefix used by "make inclinstall libainstall" of core python
-installdir= /usr/local
-
-# The exec_prefix used by the same
-exec_installdir=$(installdir)
-
-# Source directory and VPATH in case you want to use VPATH.
-# (You will have to edit these two lines yourself -- there is no
-# automatic support as the Makefile is not generated by
-# config.status.)
-srcdir= .
-VPATH= .
-
-# === Variables that you may want to customize (rarely) ===
-
-# (Static) build target
-TARGET= python
-
-# Installed python binary (used only by boot target)
-PYTHON= python
-
-# Add more -I and -D options here
-CFLAGS= $(OPT) -I$(INCLUDEPY) -I$(EXECINCLUDEPY) $(DEFS)
-
-# These two variables can be set in Setup to merge extensions.
-# See example[23].
-BASELIB=
-BASESETUP=
-
-# === Variables set by makesetup ===
-
-MODOBJS= _MODOBJS_
-MODLIBS= _MODLIBS_
-
-# === Definitions added by makesetup ===
-
-# === Variables from configure (through sedscript) ===
-
-VERSION= @VERSION@
-CC= @CC@
-LINKCC= @LINKCC@
-SGI_ABI= @SGI_ABI@
-OPT= @OPT@
-LDFLAGS= @LDFLAGS@
-LDLAST= @LDLAST@
-DEFS= @DEFS@
-LIBS= @LIBS@
-LIBM= @LIBM@
-LIBC= @LIBC@
-RANLIB= @RANLIB@
-MACHDEP= @MACHDEP@
-SO= @SO@
-LDSHARED= @LDSHARED@
-CCSHARED= @CCSHARED@
-LINKFORSHARED= @LINKFORSHARED@
-#@SET_CCC@
-
-# Install prefix for architecture-independent files
-prefix= /usr/local
-
-# Install prefix for architecture-dependent files
-exec_prefix= $(prefix)
-
-# === Fixed definitions ===
-
-# Shell used by make (some versions default to the login shell, which is bad)
-SHELL= /bin/sh
-
-# Expanded directories
-BINDIR= $(exec_installdir)/bin
-LIBDIR= $(exec_prefix)/lib
-MANDIR= $(installdir)/man
-INCLUDEDIR= $(installdir)/include
-SCRIPTDIR= $(prefix)/lib
-
-# Detailed destination directories
-BINLIBDEST= $(LIBDIR)/python$(VERSION)
-LIBDEST= $(SCRIPTDIR)/python$(VERSION)
-INCLUDEPY= $(INCLUDEDIR)/python$(VERSION)
-EXECINCLUDEPY= $(exec_installdir)/include/python$(VERSION)
-LIBP= $(exec_installdir)/lib/python$(VERSION)
-DESTSHARED= $(BINLIBDEST)/site-packages
-
-LIBPL= $(LIBP)/config
-
-PYTHONLIBS= $(LIBPL)/libpython$(VERSION).a
-
-MAKESETUP= $(LIBPL)/makesetup
-MAKEFILE= $(LIBPL)/Makefile
-CONFIGC= $(LIBPL)/config.c
-CONFIGCIN= $(LIBPL)/config.c.in
-SETUP= $(LIBPL)/Setup
-
-SYSLIBS= $(LIBM) $(LIBC)
-
-ADDOBJS= $(LIBPL)/python.o config.o
-
-# Portable install script (configure doesn't always guess right)
-INSTALL= $(LIBPL)/install-sh -c
-# Shared libraries must be installed with executable mode on some systems;
-# rather than figuring out exactly which, we always give them executable mode.
-# Also, making them read-only seems to be a good idea...
-INSTALL_SHARED= ${INSTALL} -m 555
-
-#---------------------------------------------------
-# Possibly change some definintions for C++
-ifdef MY_LDSHARED
-LDSHARED=$(MY_LDSHARED)
-endif
-ifdef MY_LINKCC
-LINKCC=$(MY_LINKCC)
-endif
-
-
-# === Fixed rules ===
-
-# Default target. This builds shared libraries only
-default: $(HELPERLIB) sharedmods
-
-# Build everything
-all: static sharedmods
-
-# Build shared libraries from our extension modules
-sharedmods: $(SHAREDMODS)
-
-# Build a static Python binary containing our extension modules
-static: $(TARGET)
-$(TARGET): $(ADDOBJS) lib.a $(PYTHONLIBS) Makefile $(BASELIB)
- $(LINKCC) $(LDFLAGS) $(LINKFORSHARED) \
- $(ADDOBJS) lib.a $(PYTHONLIBS) \
- $(LINKPATH) $(BASELIB) $(MODLIBS) $(LIBS) $(SYSLIBS) \
- -o $(TARGET) $(LDLAST)
-
-#------------------------------------------------------------------------
-#------------------------------------------------------------------------
-# This is a default version of the install target for wxPython. It just
-# redirects to wxInstall below...
-
-install: wxInstall
-
-#install: sharedmods
-# if test ! -d $(DESTSHARED) ; then \
-# mkdir $(DESTSHARED) ; else true ; fi
-# -for i in X $(SHAREDMODS); do \
-# if test $$i != X; \
-# then $(INSTALL_SHARED) $$i $(DESTSHARED)/$$i; \
-# fi; \
-# done
-
-
-# Build the library containing our extension modules
-lib.a: $(MODOBJS)
- -rm -f lib.a
- ar cr lib.a $(MODOBJS)
- -$(RANLIB) lib.a
-
-# This runs makesetup *twice* to use the BASESETUP definition from Setup
-config.c Makefile: Makefile.pre Setup $(BASESETUP) $(MAKESETUP)
- $(MAKESETUP) \
- -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
- $(MAKE) -f Makefile do-it-again
-
-# Internal target to run makesetup for the second time
-do-it-again:
- $(MAKESETUP) \
- -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
-
-# Make config.o from the config.c created by makesetup
-config.o: config.c
- $(CC) $(CFLAGS) -c config.c
-
-# Setup is copied from Setup.in *only* if it doesn't yet exist
-Setup:
- cp Setup.in Setup
-
-# Make the intermediate Makefile.pre from Makefile.pre.in
-Makefile.pre: Makefile.pre.in sedscript
- sed -f sedscript Makefile.pre.in >Makefile.pre
-
-# Shortcuts to make the sed arguments on one line
-P=prefix
-E=exec_prefix
-H=Generated automatically from Makefile.pre.in by sedscript.
-L=LINKFORSHARED
-
-# Make the sed script used to create Makefile.pre from Makefile.pre.in
-sedscript: $(MAKEFILE)
- sed -n \
- -e '1s/.*/1i\\/p' \
- -e '2s%.*%# $H%p' \
- -e '/^VERSION=/s/^VERSION=[ ]*\(.*\)/s%@VERSION[@]%\1%/p' \
- -e '/^CC=/s/^CC=[ ]*\(.*\)/s%@CC[@]%\1%/p' \
- -e '/^CCC=/s/^CCC=[ ]*\(.*\)/s%#@SET_CCC[@]%CCC=\1%/p' \
- -e '/^LINKCC=/s/^LINKCC=[ ]*\(.*\)/s%@LINKCC[@]%\1%/p' \
- -e '/^OPT=/s/^OPT=[ ]*\(.*\)/s%@OPT[@]%\1%/p' \
- -e '/^LDFLAGS=/s/^LDFLAGS=[ ]*\(.*\)/s%@LDFLAGS[@]%\1%/p' \
- -e '/^DEFS=/s/^DEFS=[ ]*\(.*\)/s%@DEFS[@]%\1%/p' \
- -e '/^LIBS=/s/^LIBS=[ ]*\(.*\)/s%@LIBS[@]%\1%/p' \
- -e '/^LIBM=/s/^LIBM=[ ]*\(.*\)/s%@LIBM[@]%\1%/p' \
- -e '/^LIBC=/s/^LIBC=[ ]*\(.*\)/s%@LIBC[@]%\1%/p' \
- -e '/^RANLIB=/s/^RANLIB=[ ]*\(.*\)/s%@RANLIB[@]%\1%/p' \
- -e '/^MACHDEP=/s/^MACHDEP=[ ]*\(.*\)/s%@MACHDEP[@]%\1%/p' \
- -e '/^SO=/s/^SO=[ ]*\(.*\)/s%@SO[@]%\1%/p' \
- -e '/^LDSHARED=/s/^LDSHARED=[ ]*\(.*\)/s%@LDSHARED[@]%\1%/p' \
- -e '/^CCSHARED=/s/^CCSHARED=[ ]*\(.*\)/s%@CCSHARED[@]%\1%/p' \
- -e '/^$L=/s/^$L=[ ]*\(.*\)/s%@$L[@]%\1%/p' \
- -e '/^$P=/s/^$P=\(.*\)/s%^$P=.*%$P=\1%/p' \
- -e '/^$E=/s/^$E=\(.*\)/s%^$E=.*%$E=\1%/p' \
- $(MAKEFILE) >sedscript
- echo "/^#@SET_CCC@/d" >>sedscript
- echo "/^installdir=/s%=.*%= $(installdir)%" >>sedscript
- echo "/^exec_installdir=/s%=.*%=$(exec_installdir)%" >>sedscript
- echo "/^srcdir=/s%=.*%= $(srcdir)%" >>sedscript
- echo "/^VPATH=/s%=.*%= $(VPATH)%" >>sedscript
- echo "/^LINKPATH=/s%=.*%= $(LINKPATH)%" >>sedscript
- echo "/^BASELIB=/s%=.*%= $(BASELIB)%" >>sedscript
- echo "/^BASESETUP=/s%=.*%= $(BASESETUP)%" >>sedscript
-
-# Bootstrap target
-boot: clobber
- VERSION=`$(PYTHON) -c "import sys; print sys.version[:3]"`; \
- installdir=`$(PYTHON) -c "import sys; print sys.prefix"`; \
- exec_installdir=`$(PYTHON) -c "import sys; print sys.exec_prefix"`; \
- $(MAKE) -f Makefile.pre.in VPATH=$(VPATH) srcdir=$(srcdir) \
- VERSION=$$VERSION \
- installdir=$$installdir \
- exec_installdir=$$exec_installdir \
- Makefile
-
-# Handy target to remove intermediate files and backups
-clean:
- -rm -f *.o *~
-
-# Handy target to remove everything that is easily regenerated
-clobber: clean
- -rm -f *.a tags TAGS config.c Makefile.pre $(TARGET) sedscript
- -rm -f *.so *.sl so_locations
-
-
-# Handy target to remove everything you don't want to distribute
-distclean: clobber
- -rm -f Makefile Setup
-
-
-
-
-#------------------------------------------------------------------------
-#------------------------------------------------------------------------
-# Custom rules and dependencies added for wxPython
-#
-
-WXP_VERSION=2.1b2
-
-SWIGFLAGS=-c++ -shadow -python -dnone -D__WXGTK__ $(SEPARATE)
-
-
-PYMODULES = $(GENCODEDIR)/wx.py $(GENCODEDIR)/events.py \
- $(GENCODEDIR)/windows.py $(GENCODEDIR)/misc.py \
- $(GENCODEDIR)/gdi.py $(GENCODEDIR)/mdi.py \
- $(GENCODEDIR)/controls.py $(GENCODEDIR)/controls2.py \
- $(GENCODEDIR)/windows2.py $(GENCODEDIR)/cmndlgs.py \
- $(GENCODEDIR)/stattool.py $(GENCODEDIR)/frames.py \
- $(GENCODEDIR)/windows3.py __init__.py \
- $(GENCODEDIR)/utils.py $(GENCODEDIR)/image.py \
- $(GENCODEDIR)/printfw.py $(GENCODEDIR)/misc2.py \
- $(GENCODEDIR)/glcanvas.py
-
-
-# Implicit rules to run SWIG
-$(GENCODEDIR)/%.cpp : %.i
- swig $(SWIGFLAGS) -c -o $@ $<
-
-$(GENCODEDIR)/%.py : %.i
- swig $(SWIGFLAGS) -c -o $(GENCODEDIR)/tmp_wrap.cpp $<
- rm $(GENCODEDIR)/tmp_wrap.cpp
-
-# This one must leave out the -c flag so we define the whole rule
-#$(GENCODEDIR)/wx.cpp $(GENCODEDIR)/wx.py : wx.i my_typemaps.i _defs.i _extras.py
-# swig $(SWIGFLAGS) -o $(GENCODEDIR)/wx.cpp wx.i
-
-
-# define some dependencies
-$(GENCODEDIR)/wx.cpp $(GENCODEDIR)/wx.py : wx.i my_typemaps.i _defs.i _extras.py
-$(GENCODEDIR)/windows.cpp $(GENCODEDIR)/windows.py : windows.i my_typemaps.i _defs.i
-$(GENCODEDIR)/windows2.cpp $(GENCODEDIR)/windows2.py : windows2.i my_typemaps.i _defs.i
-$(GENCODEDIR)/windows3.cpp $(GENCODEDIR)/windows3.py : windows3.i my_typemaps.i _defs.i
-$(GENCODEDIR)/events.cpp $(GENCODEDIR)/events.py : events.i my_typemaps.i _defs.i
-$(GENCODEDIR)/misc.cpp $(GENCODEDIR)/misc.py : misc.i my_typemaps.i _defs.i
-$(GENCODEDIR)/misc2.cpp $(GENCODEDIR)/misc2.py : misc2.i my_typemaps.i _defs.i
-$(GENCODEDIR)/gdi.cpp $(GENCODEDIR)/gdi.py : gdi.i my_typemaps.i _defs.i
-$(GENCODEDIR)/mdi.cpp $(GENCODEDIR)/mdi.py : mdi.i my_typemaps.i _defs.i
-$(GENCODEDIR)/controls.cpp $(GENCODEDIR)/controls.py : controls.i my_typemaps.i _defs.i
-$(GENCODEDIR)/controls2.cpp $(GENCODEDIR)/controls2.py : controls2.i my_typemaps.i _defs.i
-$(GENCODEDIR)/cmndlgs.cpp $(GENCODEDIR)/cmndlgs.py : cmndlgs.i my_typemaps.i _defs.i
-$(GENCODEDIR)/frames.cpp $(GENCODEDIR)/frames.py : frames.i my_typemaps.i _defs.i
-$(GENCODEDIR)/stattool.cpp $(GENCODEDIR)/stattool.py : stattool.i my_typemaps.i _defs.i
-$(GENCODEDIR)/image.cpp $(GENCODEDIR)/image.py : image.i my_typemaps.i _defs.i
-$(GENCODEDIR)/utils.cpp $(GENCODEDIR)/utils.py : utils.i my_typemaps.i _defs.i
-$(GENCODEDIR)/printfw.cpp $(GENCODEDIR)/printfw.py : printfw.i my_typemaps.i _defs.i
-$(GENCODEDIR)/glcanvas.cpp $(GENCODEDIR)/glcanvas.py : glcanvas.i my_typemaps.i _defs.i
-
-$(GENCODEDIR)/helpers.cpp:
- ln -s `pwd`/helpers.cpp $@
-
-$(GENCODEDIR)/libpy.c:
- ln -s `pwd`/libpy.c $@
-
-$(GENCODEDIR)/_glcanvas.cpp:
- -cp $(WXWIN)/utils/glcanvas/$(GENCODEDIR)/glcanvas.cpp $@
- -cp $(WXWIN)/utils/glcanvas/$(GENCODEDIR)/glcanvas.h ./glcanvas.h
-
-
-wxInstall : $(HELPERLIB) sharedmods $(PYMODULES)
- if test ! -d $(TARGETDIR) ; then \
- mkdir $(TARGETDIR) ; else true ; fi
- if [ "$(SHAREDMODS)" != "" ]; then \
- chmod 755 $(SHAREDMODS); \
- cp $(SHAREDMODS) $(TARGETDIR); fi
- -for i in $(PYMODULES); do \
- cp $$i $(TARGETDIR); \
- done
- if [ "$(TARGETDIR)" != ".." ]; then \
- mkdir $(TARGETDIR)/lib; \
- mkdir $(TARGETDIR)/lib/sizers; \
- mkdir $(TARGETDIR)/demo; \
- mkdir $(TARGETDIR)/demo/bitmaps; \
- cp ../lib/*.py $(TARGETDIR)/lib; \
- cp ../lib/sizers/*.py $(TARGETDIR)/lib/sizers; \
- cp ../demo/*.py $(TARGETDIR)/demo; \
- cp ../lib/*.txt $(TARGETDIR)/lib; \
- cp ../lib/sizers/*.txt $(TARGETDIR)/lib/sizers; \
- cp ../demo/*.txt $(TARGETDIR)/demo; \
- cp ../demo/bitmaps/[a-z]* $(TARGETDIR)/demo/bitmaps; \
- fi
- if [ "$(TARGETDIR)" != ".." ]; then \
- python $(LIBDEST)/compileall.py $(TARGETDIR); \
- python -O $(LIBDEST)/compileall.py $(TARGETDIR); \
- else \
- python $(LIBDEST)/compileall.py -l $(TARGETDIR); \
- python -O $(LIBDEST)/compileall.py -l $(TARGETDIR);\
- fi
-ifdef HELPERLIB
- cp lib$(WXPYLIB)$(SO) $(WXPYLIBDIR)
- @echo ---------------------------------------------------------
- @echo You may have to run ldconfig, or set an environment
- @echo variable in order for $(WXPYLIBDIR)/lib$(WXPYLIB)$(SO)
- @echo to be found at runtime. See your man pages for ld.so or
- @echo equivalent.
- @echo ---------------------------------------------------------
-endif
-
-ifdef HELPERLIB
-helpers.o: $(srcdir)/helpers.cpp; $(CCC) $(CCSHARED) $(C_DEFINES) $(C_FLAGS) $(CFLAGS) -c $(srcdir)/helpers.cpp
-libpy.o: $(srcdir)/libpy.c; $(CC) $(CCSHARED) $(C_DEFINES) $(C_FLAGS) $(CFLAGS) -c $(srcdir)/libpy.c
-
-$(HELPERLIB) : helpers.o libpy.o
- $(LDSHARED) helpers.o libpy.o $(C_DEFINES) $(C_FLAGS) -Xlinker $(WX_CONFIG_LIBS) -o $@
-endif
-
-
-lib : libwxPython.a
-
-libwxPython.a : lib.a
- cp $< $@
-
-dist: tgz rpm
-
-tgz:
- cd ../..; wxPython/distrib/maketgz $(WXP_VERSION)
-
-rpm:
- cd ../distrib; ./makerpm $(WXP_VERSION)
-
-
-
-
+++ /dev/null
-# -*- makefile -*-
-## This file gives the details of what is needed to build this extension
-## module so the Makefile can be created.
-
-## If you have not done "make install" for wxWindows then see Setup.in.linux
-## for a more verbose version of this file.
-
-*shared*
-
-CCC=c++
-WXWIN=../../..
-GENCODEDIR=gtk
-srcdir=$(GENCODEDIR)
-WX_CONFIG_CFLAGS=`wx-config --cflags`
-WX_CONFIG_LIBS=`wx-config --libs`
-
-
-
-## Depending on how your Python was built, you may have to set this
-## value to use the C++ driver to link with instead of the default
-## C driver. For example:
-MY_LDSHARED=$(CCC) -shared
-
-## Same as above, but for statically linking Python and wxPython together,
-## in other words, if you comment out the *shared* above. If this is the
-## case then you should ensure that the main() function is Python's, not
-## wxWindows'. You can rebuild $(WXWIN)/src/gtk/app.cpp with NOMAIN defined
-## to force this...
-MY_LINKCC=$(CCC)
-
-
-## Pick one of these, or set your own. This is where the wxPython module
-## should be installed. It should be a subdirectory named wxPython.
-#TARGETDIR=..
-TARGETDIR=$(BINLIBDEST)/site-packages/wxPython
-
-
-##----------------------------------------------------------------------
-## To build wxPython as separate extension modules, uncomment and use
-## these variable definitions and Setup rules.
-##
-WXPYLIB = wxPyHelpers
-WXPYLIBDIR = /usr/local/lib
-HELPERLIB = lib$(WXPYLIB)$(SO)
-C_DEFINES = -DSWIG_GLOBAL -DWXP_USE_THREAD -DSEPARATE
-C_FLAGS = -I. $(WX_CONFIG_CFLAGS)
-C_LIBS = -L. -l$(WXPYLIB) $(WX_CONFIG_LIBS)
-
-wxc wx.cpp windows.cpp events.cpp misc.cpp misc2.cpp gdi.cpp \
- mdi.cpp controls.cpp controls2.cpp windows2.cpp cmndlgs.cpp \
- frames.cpp stattool.cpp windows3.cpp image.cpp printfw.cpp \
- $(C_DEFINES) $(C_FLAGS) -Xlinker $(C_LIBS)
-
-utilsc utils.cpp \
- $(C_DEFINES) $(C_FLAGS) -Xlinker $(C_LIBS)
-
-glcanvasc _glcanvas.cpp glcanvas.cpp -DWITH_GLCANVAS -lMesaGL -lMesaGLU \
- $(C_DEFINES) $(C_FLAGS) -Xlinker $(C_LIBS)
-
-
-##----------------------------------------------------------------------
-## To build wxPython as one big extension module, comment out the above
-## rules and definitions, and then uncomment this single Setup rule.
-##
-#wxc helpers.cpp libpy.c libptr.c \
-# wx.cpp windows.cpp events.cpp misc.cpp misc2.cpp gdi.cpp \
-# mdi.cpp controls.cpp controls2.cpp windows2.cpp cmndlgs.cpp \
-# frames.cpp stattool.cpp windows3.cpp image.cpp printfw.cpp \
-# utils.cpp \
-# ## comment out the next line to disable wxGLCanvas
-# _glcanvas.cpp glcanvas.cpp -DWITH_GLCANVAS -lGL -lGLU \
-# -I. $(WX_CONFIG_CFLAGS) -I/usr/local/lib/glib/include \
-# -DSWIG_GLOBAL -DWXP_USE_THREAD $(SEPARATE) -Xlinker $(WX_CONFIG_LIBS)
-
+++ /dev/null
-# This file gives the details of what is needed to build this extension
-# module so the Makefile can be created.
-
-###
-### This file should be created by configure. Currently it is tweaked by hand.
-###
-
-*shared*
-
-CCC=c++
-WXWIN=../../..
-GENCODEDIR=gtk
-srcdir=$(GENCODEDIR)
-
-# Depending on how your Python was built, you may have to set this
-# value to use the C++ driver to link with instead of the default
-# C driver. For example:
-MY_LDSHARED=$(CCC) -shared
-
-# Same as above, but for statically linking Python and wxPython together,
-# in other words, if you comment out the *shared* above. If this is the
-# case then you should ensure that the main() function is Python's, not
-# wxWindows'. You can rebuild $(WXWIN)/src/gtk/app.cpp with NOMAIN defined
-# to force this...
-MY_LINKCC=$(CCC)
-
-
-## Pick one of these, or set your own. This is where the
-## wxPython module should be installed. It should be a
-## subdirectory named wxPython.
-TARGETDIR=..
-#TARGETDIR=$(BINLIBDEST)/site-packages/wxPython
-
-SEPARATE=-DSEPARATE
-
-wxc wx.cpp helpers.cpp windows.cpp events.cpp misc.cpp gdi.cpp \
- mdi.cpp controls.cpp controls2.cpp windows2.cpp cmndlgs.cpp \
- frames.cpp stattool.cpp windows3.cpp \
- # CFLAGS
- -I. -I$(WXWIN)/include -I/usr/lib/glib/include -I$(WXWIN)/src \
- -I/usr/X11R6/include -DSWIG_GLOBAL -D__WXGTK__ \
- -DWXP_WITH_THREAD $(SEPARATE) \
- #-D__WXDEBUG__ \
- # LFLAGS
- -L$(WXWIN)/lib/Linux -L/usr/X11R6/lib \
- -lwx_gtk2 -lgtk -lgdk -lglib -lXext -lX11
-
-utilsc utils.cpp \
- # CFLAGS
- -I. -I$(WXWIN)/include -I/usr/lib/glib/include -I$(WXWIN)/src \
- -I/usr/X11R6/include -DSWIG_GLOBAL -D__WXGTK__ \
- -DWXP_WITH_THREAD $(SEPARATE) \
- #-D__WXDEBUG__ \
- # LFLAGS
- -L$(WXWIN)/lib/Linux -L/usr/X11R6/lib \
- -lwx_gtk2 -lgtk -lgdk -lglib -lXext -lX11
+++ /dev/null
-# This file gives the details of what is needed to build this extension
-# module so the Makefile can be created.
-
-###
-### This file should be created by configure. Currently it is tweaked by hand.
-###
-
-#*shared*
-
-CCC=c++
-WXWIN=../../..
-GENCODEDIR=gtk
-srcdir=$(GENCODEDIR)
-
-# Depending on how your Python was built, you may have to set this
-# value to use the C++ driver to link with instead of the default
-# C driver. For example:
-#MY_LDSHARED=$(CCC) -shared
-
-# Same as above, but for statically linking Python and wxPython together,
-# in other words, if you comment out the *shared* above. If this is the
-# case then you should ensure that the main() function is Python's, not
-# wxWindows'. You can rebuild $(WXWIN)/src/gtk/app.cpp with NOMAIN defined
-# to force this...
-MY_LINKCC=$(CCC)
-
-
-## Pick one of these, or set your own. This is where the
-## wxPython module should be installed. It should be a
-## subdirectory named wxPython.
-TARGETDIR=..
-#TARGETDIR=$(BINLIBDEST)/site-packages/wxPython
-
-
-wxc wx.cpp helpers.cpp windows.cpp events.cpp misc.cpp gdi.cpp \
- mdi.cpp controls.cpp controls2.cpp windows2.cpp cmndlgs.cpp \
- frames.cpp stattool.cpp utils.cpp windows3.cpp \
- # CFLAGS
- -I. -I$(WXWIN)/include -I/usr/local/lib/glib/include -I$(WXWIN)/src \
- -I/usr/X/include -DSWIG_GLOBAL -D__WXGTK__ \
- #-D__WXDEBUG__ \
- # LFLAGS
- -L$(WXWIN)/lib/solaris2.6 -L/usr/X/lib \
- -L/usr/local/lib/gcc-lib/sparc-sun-solaris2.6/2.8.1 \
- -lwx_gtk2 -lgtk -lgdk -lglib -lXext -lX11 -lstdc++ -lgcc
+++ /dev/null
-# -*- makefile -*-
-#----------------------------------------------------------------------------
-# Name: makefile.nt
-# Purpose: Win32, VC++ 5/6 makefile for wxPython
-#
-# Author: Robin Dunn
-#
-# Created: 3/27/97
-# RCS-ID: $Id$
-# Copyright: (c) 1998 by Total Control Software
-# Licence: wxWindows license
-#----------------------------------------------------------------------------
-VERSION=2.1b3
-
-# Set WXDIR to the root wxWindows directory for your system
-WXDIR = $(WXWIN)
-
-# Set this to the root of the Python installation
-PYTHONDIR=e:\Tools\Python15
-
-# Set this to 1 for a non-debug, optimised compile
-FINAL=0
-
-# Set this to where you want the stuff installed at. It should
-# be a directory contained in a PYTHONPATH directory, and should be
-# named wxPython
-TARGETDIR=..
-
-# Set this to 1 for make to pre-compile the Python modules, 0 to
-# just copy the sources and let Python compile them the first
-# time they are imported.
-COMPILEPY=0
-
-# If your wxWindows is built as a DLL, set this to 1. Using 0 or unset
-# means that wxWindows will be staticaly linked with wxPython.
-WXUSINGDLL=1
-
-# If you want to compile in code to aquire/release the Python
-# Interpreter Lock at the appropriate places
-WXP_USE_THREAD=1
-
-
-# Set this if you want to build the wxGLCanvas
-WITH_GLCANVAS=1
-
-# (experimental)
-SEPARATE=1
-
-#----------------------------------------------------------------------
-
-!if "$(WXP_USE_THREAD)" == "1"
-THREAD=-DWXP_USE_THREAD=1
-!endif
-
-#----------------------------------------------------------------------
-
-NOPCH=1
-THISDIR=$(WXDIR)\utils\wxPython
-
-
-EXTRALIBS=$(PYTHONDIR)\libs\python15.lib $(GLLIBS)
-#EXTRALIBS=$(PYTHONDIR)\PCbuild\python15_d.lib -D_DEBUG
-EXTRAINC=-I$(PYTHONDIR)\include -I. -I$(WXDIR)\utils\glcanvas\win
-EXTRAFLAGS=/Fpwxp.pch /YXhelpers.h -DSWIG_GLOBAL -DHAVE_CONFIG_H $(THREAD)
-OVERRIDEFLAGS=/GX- $(OTHERCFLAGS)
-
-
-!if "$(WITH_GLCANVAS)" == "1"
-GLLIBS=$(WXDIR)\lib\glcanvas.lib glu32.lib opengl32.lib
-OTHERSWIGFLAGS=-DWITH_GLCANVAS
-OTHERCFLAGS=-DWITH_GLCANVAS
-!endif
-
-SWIGFLAGS=-c++ -shadow -python -dnone -D__WXMSW__ $(OTHERSWIGFLAGS)
-GENCODEDIR=msw
-
-
-!include $(WXDIR)\src\makevc.env
-
-#----------------------------------------------------------------------
-
-TARGET = wxc
-
-OBJECTS = helpers.obj libpy.obj \
- wx.obj windows.obj events.obj \
- misc.obj gdi.obj mdi.obj controls.obj \
- controls2.obj windows2.obj cmndlgs.obj stattool.obj \
- frames.obj windows3.obj image.obj printfw.obj \
- misc2.obj \
-!if "$(SEPARATE)" == "0"
- utils.obj \
-!if "$(WITH_GLCANVAS)" == "1"
- glcanvas.obj
-!endif
-!else
-
-OTHERCFLAGS=$(OTHERCFLAGS) -DSEPARATE=1
-OTHERSWIGFLAGS=$(OTHERSWIGFLAGS) -DSEPARATE
-TARGET2 = utilsc
-OBJECTS2 = utils.obj
-target2=$(TARGETDIR)\$(TARGET2).pyd
-
-TARGET3 = glcanvasc
-OBJECTS3 = glcanvas.obj
-target3=$(TARGETDIR)\$(TARGET3).pyd
-
-#TARGET4 = oglcc
-#OBJECTS4 = ogl.obj
-#target4=$(TARGETDIR)\$(TARGET4).pyd
-!endif
-
-PYMODULES = $(TARGETDIR)\wx.py $(TARGETDIR)\events.py \
- $(TARGETDIR)\windows.py $(TARGETDIR)\misc.py \
- $(TARGETDIR)\gdi.py $(TARGETDIR)\mdi.py \
- $(TARGETDIR)\controls.py $(TARGETDIR)\controls2.py \
- $(TARGETDIR)\windows2.py $(TARGETDIR)\cmndlgs.py \
- $(TARGETDIR)\stattool.py $(TARGETDIR)\frames.py \
- $(TARGETDIR)\windows3.py $(TARGETDIR)\__init__.py \
- $(TARGETDIR)\utils.py $(TARGETDIR)\image.py \
- $(TARGETDIR)\printfw.py $(TARGETDIR)\misc2.py \
-!if "$(WITH_GLCANVAS)" == "1"
- $(TARGETDIR)\glcanvas.py
-!endif
-
-#----------------------------------------------------------------------
-
-!if "$(FINAL)" == "0"
-DEBUGLFLAGS = /DEBUG /INCREMENTAL:YES
-!else
-DEBUGLFLAGS = /INCREMENTAL:NO
-!endif
-
-LFLAGS= $(DEBUGLFLAGS) /DLL /subsystem:windows,3.50 /machine:I386 /nologo
-
-#----------------------------------------------------------------------
-
-default: $(TARGETDIR)\$(TARGET).pyd $(target2) $(target3) pycfiles
-
-all: wx $(TARGET) $(TARGET2) $(TARGET3)
-
-wx:
- cd $(WXDIR)\src\msw
- nmake -f makefile.nt FINAL=$(FINAL)
- cd $(THISDIR)
-
-wxclean:
- cd $(WXDIR)\src\msw
- nmake -f makefile.nt clean
- cd $(THISDIR)
-
-
-pycfiles : $(PYMODULES)
-!if "$(COMPILEPY)" == "1"
- $(PYTHONDIR)\python $(PYTHONDIR)\Lib\compileall.py -l $(TARGETDIR)
- $(PYTHONDIR)\python -O $(PYTHONDIR)\Lib\compileall.py -l $(TARGETDIR)
-!endif
-
-#----------------------------------------------------------------------
-
-$(TARGETDIR)\$(TARGET).pyd : $(DUMMYOBJ) $(WXLIB) $(OBJECTS) $(TARGET).res
- $(link) @<<
-/out:$@ /dll
-$(LFLAGS) /def:$(TARGET).def /implib:./$(TARGET).lib
-$(DUMMYOBJ) $(OBJECTS) $(TARGET).res
-$(LIBS)
-<<
-
-$(TARGETDIR)\$(TARGET2).pyd : $(DUMMYOBJ) $(WXLIB) $(OBJECTS2)
- $(link) @<<
-/out:$@ /dll
-$(LFLAGS) /def:$(TARGET2).def /implib:./$(TARGET2).lib
-$(DUMMYOBJ) $(OBJECTS2)
-$(LIBS) wxc.lib
-<<
-
-$(TARGETDIR)\$(TARGET3).pyd : $(DUMMYOBJ) $(WXLIB) $(OBJECTS3)
- $(link) @<<
-/out:$@ /dll
-$(LFLAGS) /def:$(TARGET3).def /implib:./$(TARGET3).lib
-$(DUMMYOBJ) $(OBJECTS3)
-$(LIBS) $(WXDIR)\lib\glcanvas.lib glu32.lib opengl32.lib wxc.lib
-<<
-
-
-#$(TARGETDIR)\$(TARGET4).pyd : $(DUMMYOBJ) $(WXLIB) $(OBJECTS4)
-# $(link) @<<
-#/out:$@ /dll
-#$(LFLAGS) /def:$(TARGET4).def /implib:./$(TARGET4).lib
-#$(DUMMYOBJ) $(OBJECTS4)
-#$(LIBS) wxc.lib $(WXDIR)\lib\ogl$(LIBEXT).lib
-#<<
-
-
-$(TARGET).res : $(TARGET).rc $(WXDIR)\include\wx\msw\wx.rc
- $(rc) -r /i$(WXDIR)\include -fo$@ $(TARGET).rc
-
-
-
-# implicit rule for compiling .cpp and .c files
-{}.cpp{}.obj:
- $(cc) @<<
-$(CPPFLAGS) /c /Tp $<
-<<
-
-{$(GENCODEDIR)}.cpp{}.obj:
- $(cc) @<<
-$(CPPFLAGS) /c /Tp $<
-<<
-
-{}.c{}.obj:
- $(cc) @<<
-$(CPPFLAGS) /c $<
-<<
-
-
-clean:
- -erase *.obj
- -erase *.exe
- -erase *.res
- -erase *.map
- -erase *.sbr
- -erase *.pdb
- -erase *.pch
- -erase $(TARGET).exp
- -erase $(TARGET).lib
- -erase $(TARGETDIR)\$(TARGET).*
-!if "$(SEPARATE)" != "0"
- -erase $(TARGET2).exp
- -erase $(TARGET2).lib
- -erase $(TARGETDIR)\$(TARGET2).*
- -erase $(TARGET3).exp
- -erase $(TARGET3).lib
- -erase $(TARGETDIR)\$(TARGET3).*
-# -erase $(TARGET4).exp
-# -erase $(TARGET4).lib
-# -erase $(TARGETDIR)\$(TARGET4).*
-!endif
- -erase $(TARGETDIR)\$(TARGET).pyd
- -erase $(TARGETDIR)\*.py
- -erase $(TARGETDIR)\*.pyc
- -erase $(TARGETDIR)\*.pyo
-
-
-showflags:
- @echo $(CPPFLAGS)
-
-#------------------------------------------------------------------------
-
-.SUFFIXES : .i .py
-
-# Implicit rules to run SWIG
-{}.i{$(GENCODEDIR)}.cpp:
- swig $(SWIGFLAGS) -c -o $@ $<
-
-{}.i{$(GENCODEDIR)}.py:
- swig $(SWIGFLAGS) -c -o $@ $<
-
-
-{$(GENCODEDIR)}.py{$(TARGETDIR)}.py:
- copy $< $@
-
-{}.py{$(TARGETDIR)}.py:
- copy $< $@
-
-#{}.py{$(TARGETDIR)}.$(PYEXT):
-# $(PYTHON) -c "import py_compile; py_compile.compile('$<', '$@')"
-
-
-
-
-
-# Define some dependencies. These MUST use forward slashes so SWIG
-# will write the shadow file to the right directory.
-$(GENCODEDIR)/wx.cpp $(GENCODEDIR)/wx.py : wx.i my_typemaps.i _defs.i
-$(GENCODEDIR)/windows.cpp $(GENCODEDIR)/windows.py : windows.i my_typemaps.i _defs.i
-$(GENCODEDIR)/windows2.cpp $(GENCODEDIR)/windows2.py : windows2.i my_typemaps.i _defs.i
-$(GENCODEDIR)/windows3.cpp $(GENCODEDIR)/windows3.py : windows3.i my_typemaps.i _defs.i
-$(GENCODEDIR)/events.cpp $(GENCODEDIR)/events.py : events.i my_typemaps.i _defs.i
-$(GENCODEDIR)/misc.cpp $(GENCODEDIR)/misc.py : misc.i my_typemaps.i _defs.i
-$(GENCODEDIR)/misc2.cpp $(GENCODEDIR)/misc2.py : misc2.i my_typemaps.i _defs.i
-$(GENCODEDIR)/gdi.cpp $(GENCODEDIR)/gdi.py : gdi.i my_typemaps.i _defs.i
-$(GENCODEDIR)/mdi.cpp $(GENCODEDIR)/mdi.py : mdi.i my_typemaps.i _defs.i
-$(GENCODEDIR)/controls.cpp $(GENCODEDIR)/controls.py : controls.i my_typemaps.i _defs.i
-$(GENCODEDIR)/controls2.cpp $(GENCODEDIR)/controls2.py : controls2.i my_typemaps.i _defs.i
-$(GENCODEDIR)/cmndlgs.cpp $(GENCODEDIR)/cmndlgs.py : cmndlgs.i my_typemaps.i _defs.i
-$(GENCODEDIR)/stattool.cpp $(GENCODEDIR)/stattool.py : stattool.i my_typemaps.i _defs.i
-$(GENCODEDIR)/frames.cpp $(GENCODEDIR)/frames.py : frames.i my_typemaps.i _defs.i
-$(GENCODEDIR)/image.cpp $(GENCODEDIR)/image.py : image.i my_typemaps.i _defs.i
-$(GENCODEDIR)/printfw.cpp $(GENCODEDIR)/printfw.py : printfw.i my_typemaps.i _defs.i
-
-$(GENCODEDIR)/utils.cpp $(GENCODEDIR)/utils.py : utils.i my_typemaps.i _defs.i
-$(GENCODEDIR)/glcanvas.cpp $(GENCODEDIR)/glcanvas.py : glcanvas.i my_typemaps.i _defs.i
-#$(GENCODEDIR)/ogl.cpp $(GENCODEDIR)/ogl.py : ogl.i my_typemaps.i _defs.i
-
-
-
-$(TARGETDIR)\wx.py : $(GENCODEDIR)\wx.py
-$(TARGETDIR)\windows.py : $(GENCODEDIR)\windows.py
-$(TARGETDIR)\windows2.py : $(GENCODEDIR)\windows2.py
-$(TARGETDIR)\windows3.py : $(GENCODEDIR)\windows3.py
-$(TARGETDIR)\events.py : $(GENCODEDIR)\events.py
-$(TARGETDIR)\misc.py : $(GENCODEDIR)\misc.py
-$(TARGETDIR)\misc2.py : $(GENCODEDIR)\misc2.py
-$(TARGETDIR)\gdi.py : $(GENCODEDIR)\gdi.py
-$(TARGETDIR)\mdi.py : $(GENCODEDIR)\mdi.py
-$(TARGETDIR)\controls.py : $(GENCODEDIR)\controls.py
-$(TARGETDIR)\controls2.py : $(GENCODEDIR)\controls2.py
-$(TARGETDIR)\cmndlgs.py : $(GENCODEDIR)\cmndlgs.py
-$(TARGETDIR)\frames.py : $(GENCODEDIR)\frames.py
-$(TARGETDIR)\stattool.py : $(GENCODEDIR)\stattool.py
-$(TARGETDIR)\__init__.py : __init__.py
-$(TARGETDIR)\utils.py : $(GENCODEDIR)\utils.py
-$(TARGETDIR)\image.py : $(GENCODEDIR)\image.py
-$(TARGETDIR)\printfw.py : $(GENCODEDIR)\printfw.py
-#$(TARGETDIR)\ogl.py : $(GENCODEDIR)\ogl.py
-
-!if "$(WITH_GLCANVAS)" == "1"
-$(TARGETDIR)\glcanvas.py : $(GENCODEDIR)\glcanvas.py
-!endif
-
-
-SOURCES = $(GENCODEDIR)/wx.cpp $(GENCODEDIR)/wx.py \
- $(GENCODEDIR)/windows.cpp $(GENCODEDIR)/windows.py \
- $(GENCODEDIR)/windows2.cpp $(GENCODEDIR)/windows2.py \
- $(GENCODEDIR)/windows3.cpp $(GENCODEDIR)/windows3.py \
- $(GENCODEDIR)/events.cpp $(GENCODEDIR)/events.py \
- $(GENCODEDIR)/misc.cpp $(GENCODEDIR)/misc.py \
- $(GENCODEDIR)/misc2.cpp $(GENCODEDIR)/misc2.py \
- $(GENCODEDIR)/gdi.cpp $(GENCODEDIR)/gdi.py \
- $(GENCODEDIR)/mdi.cpp $(GENCODEDIR)/mdi.py \
- $(GENCODEDIR)/controls.cpp $(GENCODEDIR)/controls.py \
- $(GENCODEDIR)/controls2.cpp $(GENCODEDIR)/controls2.py\
- $(GENCODEDIR)/cmndlgs.cpp $(GENCODEDIR)/cmndlgs.py \
- $(GENCODEDIR)/stattool.cpp $(GENCODEDIR)/stattool.py \
- $(GENCODEDIR)/frames.cpp $(GENCODEDIR)/frames.py \
- $(GENCODEDIR)/utils.cpp $(GENCODEDIR)/utils.py \
- $(GENCODEDIR)/image.cpp $(GENCODEDIR)/image.py \
- $(GENCODEDIR)/printfw.cpp $(GENCODEDIR)/printfw.py \
-!if "$(WITH_GLCANVAS)" == "1"
- $(GENCODEDIR)/glcanvas.cpp $(GENCODEDIR)/glcanvas.py \
-!endif
-
-
-sources : $(SOURCES)
-
-
-dist:
- cd ..\..
- wxPython\distrib\zipit.bat $(VERSION)
-
-#------------------------------------------------------------------------
-#
-
-
projects / wxWidgets.git / commitdiff
