]> git.saurik.com Git - wxWidgets.git/commitdiff
refactor wxLog documentation moving verbose parts to the wxLog overview and grouping...
authorFrancesco Montorsi <f18m_cpp217828@yahoo.it>
Sun, 25 Jul 2010 11:53:54 +0000 (11:53 +0000)
committerFrancesco Montorsi <f18m_cpp217828@yahoo.it>
Sun, 25 Jul 2010 11:53:54 +0000 (11:53 +0000)
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65103 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775

docs/doxygen/overviews/log.h
interface/wx/log.h

index fc474a41ca7900a3bc0dbc612b802718595fe0ba..7acc7e4a7e41f0de6d8c9c5e7be5f41cce44c970 100644 (file)
 
 @page overview_log wxLog Classes Overview
 
-Classes:
-@li wxLog
-@li wxLogStderr
-@li wxLogStream
-@li wxLogTextCtrl
-@li wxLogWindow
-@li wxLogGui
-@li wxLogNull
-@li wxLogBuffer
-@li wxLogChain
-@li wxLogInterposer
-@li wxLogInterposerTemp
-@li wxStreamToTextRedirector
+Classes: wxLog, wxLogStderr, wxLogStream, wxLogTextCtrl, wxLogWindow, wxLogGui, wxLogNull, wxLogBuffer, 
+         wxLogChain, wxLogInterposer, wxLogInterposerTemp, wxStreamToTextRedirector
 
+Table of contents:
 @li @ref overview_log_introduction
+@li @ref overview_log_enable
 @li @ref overview_log_targets
+@li @ref overview_log_mt 
 @li @ref overview_log_customize
-
+@li @ref overview_log_tracemasks
+@li @ref overview_log_timestamps
 <hr>
 
 
@@ -41,43 +34,42 @@ as well as several standard implementations of it and a family of functions to
 use with them.
 
 First of all, no knowledge of wxLog classes is needed to use them. For this,
-you should only know about @e wxLogXXX() functions. All of them have the same
-syntax as @e printf() or @e vprintf() , i.e. they take the format string as the
-first argument and respectively a variable number of arguments or a variable
-argument list pointer. Here are all of them:
+you should only know about @ref group_funcmacro_log "wxLogXXX() functions". 
+All of them have the same syntax as @e printf() or @e vprintf() , i.e. they 
+take the format string as the first argument and respectively a variable number 
+of arguments or a variable argument list pointer. Here are all of them:
 
-@li wxLogFatalError which is like wxLogError, but also terminates the program
+@li wxLogFatalError() which is like wxLogError(), but also terminates the program
     with the exit code 3 (using @e abort() standard function). Unlike for all
     the other logging functions, this function can't be overridden by a log
     target.
-@li wxLogError is the function to use for error messages, i.e. the messages
+@li wxLogError() is the function to use for error messages, i.e. the messages
     that must be shown to the user. The default processing is to pop up a
     message box to inform the user about it.
-@li wxLogWarning for warnings. They are also normally shown to the user, but
+@li wxLogWarning() for warnings. They are also normally shown to the user, but
     don't interrupt the program work.
-@li wxLogMessage is for all normal, informational messages. They also appear in
+@li wxLogMessage() is for all normal, informational messages. They also appear in
     a message box by default (but it can be changed, see below).
-@li wxLogVerbose is for verbose output. Normally, it is suppressed, but might
+@li wxLogVerbose() is for verbose output. Normally, it is suppressed, but might
     be activated if the user wishes to know more details about the program
     progress (another, but possibly confusing name for the same function is
     wxLogInfo).
-@li wxLogStatus is for status messages. They will go into the status bar of the
+@li wxLogStatus() is for status messages. They will go into the status bar of the
     active or specified (as the first argument) wxFrame if it has one.
-@li wxLogSysError is mostly used by wxWidgets itself, but might be handy for
+@li wxLogSysError() is mostly used by wxWidgets itself, but might be handy for
     logging errors after system call (API function) failure. It logs the
     specified message text as well as the last system error code (@e errno or
-    ::GetLastError() depending on the platform) and the corresponding error
+    Windows' @e GetLastError() depending on the platform) and the corresponding error
     message. The second form of this function takes the error code explicitly
     as the first argument.
-@li wxLogDebug is @b the right function for debug output. It only does anything
-    at all in the debug mode (when the preprocessor symbol __WXDEBUG__ is
+@li wxLogDebug() is @b the right function for debug output. It only does anything
+    at all in the debug mode (when the preprocessor symbol @c __WXDEBUG__ is
     defined) and expands to nothing in release mode (otherwise).
-
-    @b Tip: under Windows, you must either run the program under debugger or
+    Note that under Windows, you must either run the program under debugger or
     use a 3rd party program such as DebugView
     (http://www.microsoft.com/technet/sysinternals/Miscellaneous/DebugView.mspx)
     to actually see the debug output.
-@li wxLogTrace as wxLogDebug only does something in debug build. The reason for
+@li wxLogTrace() as wxLogDebug() only does something in debug build. The reason for
     making it a separate function from it is that usually there are a lot of
     trace messages, so it might make sense to separate them from other debug
     messages which would be flooded in them. Moreover, the second version of
@@ -177,10 +169,10 @@ works.
 wxWidgets has the notion of a <em>log target</em>: it is just a class deriving
 from wxLog. As such, it implements the virtual functions of the base class
 which are called when a message is logged. Only one log target is @e active at
-any moment, this is the one used by @e wxLogXXX() functions. The normal usage
-of a log object (i.e. object of a class derived from wxLog) is to install it as
-the active target with a call to @e SetActiveTarget() and it will be used
-automatically by all subsequent calls to @e wxLogXXX() functions.
+any moment, this is the one used by @ref group_funcmacro_log "wxLogXXX() functions". 
+The normal usage of a log object (i.e. object of a class derived from wxLog) is 
+to install it as the active target with a call to @e SetActiveTarget() and it will be used
+automatically by all subsequent calls to @ref group_funcmacro_log "wxLogXXX() functions".
 
 To create a new log target class you only need to derive it from wxLog and
 override one or several of wxLog::DoLogRecord(), wxLog::DoLogTextAtLevel() and
@@ -237,6 +229,25 @@ normally. For this the wxLogChain, wxLogInterposer, and wxLogInterposerTemp can
 be used.
 
 
+@section overview_log_mt Logging in Multi-Threaded Applications
+
+Starting with wxWidgets 2.9.1, logging functions can be safely called from any
+thread. Messages logged from threads other than the main one will be buffered
+until wxLog::Flush() is called in the main thread (which usually happens during
+idle time, i.e. after processing all pending events) and will be really output
+only then. Notice that the default GUI logger already only output the messages
+when it is flushed, so by default messages from the other threads will be shown
+more or less at the same moment as usual. However if you define a custom log
+target, messages may be logged out of order, e.g. messages from the main thread
+with later timestamp may appear before messages with earlier timestamp logged
+from other threads. wxLog does however guarantee that messages logged by each
+thread will appear in order in which they were logged.
+
+Also notice that wxLog::EnableLogging() and wxLogNull class which uses it only
+affect the current thread, i.e. logging messages may still be generated by the
+other threads after a call to @c EnableLogging(false).
+
+
 @section overview_log_customize Logging Customization
 
 To completely change the logging behaviour you may define a custom log target.
@@ -247,7 +258,7 @@ boxes.
 
 To use your custom log target you may either call wxLog::SetActiveTarget() with
 your custom log object or create a wxAppTraits-derived class and override
-CreateLogTarget() virtual method in it and also override wxApp::CreateTraits()
+wxAppTraits::CreateLogTarget() virtual method in it and also override wxApp::CreateTraits()
 to return an instance of your custom traits object. Notice that in the latter
 case you should be prepared for logging messages early during the program
 startup and also during program shutdown so you shouldn't rely on existence of
@@ -255,27 +266,80 @@ the main application window, for example. You can however safely assume that
 GUI is (already/still) available when your log target as used as wxWidgets
 automatically switches to using wxLogStderr if it isn't.
 
-The dialog sample illustrates this approach by defining a custom log target
+There are several methods which may be overridden in the derived class to
+customize log messages handling: wxLog::DoLogRecord(), wxLog::DoLogTextAtLevel() 
+and wxLog::DoLogText().
+
+The last method is the simplest one: you should override it if you simply
+want to redirect the log output elsewhere, without taking into account the
+level of the message. If you do want to handle messages of different levels
+differently, then you should override wxLog::DoLogTextAtLevel().
+
+Finally, if more control over the output format is needed, then the first
+function must be overridden as it allows to construct custom messages
+depending on the log level or even do completely different things depending
+on the message severity (for example, throw away all messages except
+warnings and errors, show warnings on the screen and forward the error
+messages to the user's (or programmer's) cell phone -- maybe depending on
+whether the timestamp tells us if it is day or night in the current time
+zone).
+
+The @e dialog sample illustrates this approach by defining a custom log target
 customizing the dialog used by wxLogGui for the single messages.
 
 
-@section overview_log_mt Logging in Multi-Threaded Applications
+@section overview_log_tracemasks Using trace masks
 
-Starting with wxWidgets 2.9.1, logging functions can be safely called from any
-thread. Messages logged from threads other than the main one will be buffered
-until wxLog::Flush() is called in the main thread (which usually happens during
-idle time, i.e. after processing all pending events) and will be really output
-only then. Notice that the default GUI logger already only output the messages
-when it is flushed, so by default messages from the other threads will be shown
-more or less at the same moment as usual. However if you define a custom log
-target, messages may be logged out of order, e.g. messages from the main thread
-with later timestamp may appear before messages with earlier timestamp logged
-from other threads. wxLog does however guarantee that messages logged by each
-thread will appear in order in which they were logged.
+Notice that the use of log trace masks is hardly necessary any longer in
+current wxWidgets version as the same effect can be achieved by using
+different log components for different log statements of any level. Please
+see @ref overview_log_enable for more information about the log components.
 
-Also notice that wxLog::EnableLogging() and wxLogNull class which uses it only
-affect the current thread, i.e. logging messages may still be generated by the
-other threads after a call to @c EnableLogging(false).
+The functions below allow some limited customization of wxLog behaviour
+without writing a new log target class (which, aside from being a matter of
+several minutes, allows you to do anything you want).
+The verbose messages are the trace messages which are not disabled in the
+release mode and are generated by wxLogVerbose().
+They are not normally shown to the user because they present little interest,
+but may be activated, for example, in order to help the user find some program
+problem.
+
+As for the (real) trace messages, their handling depends on the currently
+enabled trace masks: if wxLog::AddTraceMask() was called for the mask of the given
+message, it will be logged, otherwise nothing happens.
+
+For example,
+@code
+wxLogTrace( wxTRACE_OleCalls, "IFoo::Bar() called" );
+@endcode
+
+will log the message if it was preceded by:
+
+@code
+wxLog::AddTraceMask( wxTRACE_OleCalls);
+@endcode
+
+The standard trace masks are given in wxLogTrace() documentation.
+
+
+@section overview_log_timestamps Timestamps
+
+The wxLog::LogRecord() function automatically prepends a time stamp
+to all the messages. The format of the time stamp may be changed: it can be
+any string with % specifications fully described in the documentation of the
+standard @e strftime() function. For example, the default format is
+@c "[%d/%b/%y %H:%M:%S] " which gives something like @c "[17/Sep/98 22:10:16] "
+(without quotes) for the current date. 
+
+Setting an empty string as the time format or calling the shortcut wxLog::DisableTimestamp(), 
+disables timestamping of the messages completely.
+
+@note
+Timestamping is disabled for Visual C++ users in debug builds by
+default because otherwise it would be impossible to directly go to the line
+from which the log message was generated by simply clicking in the debugger
+window on the corresponding error message. If you wish to enable it, please
+use SetTimestamp() explicitly.
 
 */
 
index c8004415b276ca3e76a3fce5436de1a9dee38590..3be28347e7ac5ce4b7f0ecb00922de400e460b77 100644 (file)
@@ -1,6 +1,6 @@
 /////////////////////////////////////////////////////////////////////////////
 // Name:        log.h
-// Purpose:     interface of wxLogWindow
+// Purpose:     interface of wxLog* classes
 // Author:      wxWidgets team
 // RCS-ID:      $Id$
 // Licence:     wxWindows licence
@@ -96,9 +96,11 @@ public:
             @true to show the frame initially (default), otherwise
             Show() must be called later.
         @param passToOld
-            @true to process the log messages normally in addition to
-            logging them in the log frame (default), @false to only log them in the
-            log frame.
+            @true to process the log messages normally in addition to logging them 
+            in the log frame (default), @false to only log them in the log frame.
+            Note that if no targets were set using wxLog::SetActiveTarget() then 
+            wxLogWindow simply becomes the active one and messages won't be passed
+            to other targets.
     */
     wxLogWindow(wxWindow* pParent, const wxString& szTitle, bool show = true,
                 bool passToOld = true);
@@ -584,145 +586,32 @@ public:
 /**
     @class wxLog
 
-    wxLog class defines the interface for the @e log targets used by wxWidgets
+    wxLog class defines the interface for the <em>log targets</em> used by wxWidgets
     logging functions as explained in the @ref overview_log.
+    
     The only situations when you need to directly use this class is when you want
     to derive your own log target because the existing ones don't satisfy your
-    needs. Another case is if you wish to customize the behaviour of the standard
-    logging classes (all of which respect the wxLog settings): for example, set
-    which trace messages are logged and which are not or change (or even remove
-    completely) the timestamp on the messages.
+    needs.
 
-    Otherwise, it is completely hidden behind the @e wxLogXXX() functions and
-    you may not even know about its existence.
+    Otherwise, it is completely hidden behind the @ref group_funcmacro_log "wxLogXXX() functions" 
+    and you may not even know about its existence.
 
     @note For console-mode applications, the default target is wxLogStderr, so
           that all @e wxLogXXX() functions print on @c stderr when @c wxUSE_GUI = 0.
 
-
-    @section log_derivingyours Deriving your own log target
-
-    There are several methods which may be overridden in the derived class to
-    customize log messages handling: DoLogRecord(), DoLogTextAtLevel() and
-    DoLogText().
-
-    The last method is the simplest one: you should override it if you simply
-    want to redirect the log output elsewhere, without taking into account the
-    level of the message. If you do want to handle messages of different levels
-    differently, then you should override DoLogTextAtLevel().
-
-    Finally, if more control over the output format is needed, then the first
-    function must be overridden as it allows to construct custom messages
-    depending on the log level or even do completely different things depending
-    on the message severity (for example, throw away all messages except
-    warnings and errors, show warnings on the screen and forward the error
-    messages to the user's (or programmer's) cell phone -- maybe depending on
-    whether the timestamp tells us if it is day or night in the current time
-    zone).
-
-    There also functions to support message buffering. Why are they needed?
-    Some of wxLog implementations, most notably the standard wxLogGui class,
-    buffer the messages (for example, to avoid showing the user a zillion of modal
-    message boxes one after another -- which would be really annoying).
-
-    Flush() shows them all and clears the buffer contents.
-    This function doesn't do anything if the buffer is already empty.
-
-    @see FlushActive()
-
-
-    @section log_tracemasks Using trace masks
-
-    Notice that the use of log trace masks is hardly necessary any longer in
-    current wxWidgets version as the same effect can be achieved by using
-    different log components for different log statements of any level. Please
-    see @ref overview_log_enable for more information about the log components.
-
-    The functions below allow some limited customization of wxLog behaviour
-    without writing a new log target class (which, aside from being a matter of
-    several minutes, allows you to do anything you want).
-    The verbose messages are the trace messages which are not disabled in the
-    release mode and are generated by wxLogVerbose().
-    They are not normally shown to the user because they present little interest,
-    but may be activated, for example, in order to help the user find some program
-    problem.
-
-    As for the (real) trace messages, their handling depends on the currently
-    enabled trace masks: if AddTraceMask() was called for the mask of the given
-    message, it will be logged, otherwise nothing happens.
-
-    For example,
-    @code
-    wxLogTrace( wxTRACE_OleCalls, "IFoo::Bar() called" );
-    @endcode
-
-    will log the message if it was preceded by:
-
-    @code
-    wxLog::AddTraceMask( wxTRACE_OleCalls);
-    @endcode
-
-    The standard trace masks are given in wxLogTrace() documentation.
-
-    Finally, the @e wxLog::DoLog() function automatically prepends a time stamp
-    to all the messages. The format of the time stamp may be changed: it can be
-    any string with % specifications fully described in the documentation of the
-    standard @e strftime() function. For example, the default format is
-    "[%d/%b/%y %H:%M:%S] " which gives something like "[17/Sep/98 22:10:16] "
-    (without quotes) for the current date. Setting an empty string as the time
-    format or calling the shortcut wxLog::DisableTimestamp(), disables timestamping
-    of the messages completely.
-
-    See also
-    @li AddTraceMask()
-    @li RemoveTraceMask()
-    @li ClearTraceMasks()
-    @li GetTraceMasks()
-    @li IsAllowedTraceMask()
-    @li SetVerbose()
-    @li GetVerbose()
-    @li SetTimestamp()
-    @li GetTimestamp()
-    @li SetTraceMask()
-    @li GetTraceMask()
-    @li SetRepetitionCounting()
-    @li GetRepetitionCounting()
-
-    @note
-    Timestamping is disabled for Visual C++ users in debug builds by
-    default because otherwise it would be impossible to directly go to the line
-    from which the log message was generated by simply clicking in the debugger
-    window on the corresponding error message. If you wish to enable it, please
-    use SetTimestamp() explicitly.
-
-
-    @section log_target Manipulating the log target
-
-    The functions in this section work with and manipulate the active log
-    target.
-
-    Get/Set methods are used to install/query the current active target and,
-    finally, DontCreateOnDemand() disables the automatic creation of a standard
-    log target if none actually exists. It is only useful when the application
-    is terminating and shouldn't be used in other situations because it may
-    easily lead to a loss of messages.
-
-    See also:
-    @li GetActiveTarget()
-    @li SetActiveTarget()
-    @li DontCreateOnDemand()
-    @li Suspend()
-    @li Resume()
-
-
     @library{wxcore}
     @category{logging}
 
-    @see @ref overview_log
+    @see @ref overview_log, @ref group_funcmacro_log "wxLogXXX() functions" 
 */
 class wxLog
 {
 public:
+    /**
+        @name Trace mask functions
+    */
+    //@{
+    
     /**
         Add the @a mask to the list of allowed masks for wxLogTrace().
 
@@ -738,48 +627,47 @@ public:
     static void ClearTraceMasks();
 
     /**
-        Instructs wxLog to not create new log targets on the fly if there is none
-        currently. (Almost) for internal use only: it is supposed to be called by the
-        application shutdown code.
+        Returns the currently allowed list of string trace masks.
 
-        Note that this function also calls ClearTraceMasks().
+        @see AddTraceMask().
     */
-    static void DontCreateOnDemand();
+    static const wxArrayString& GetTraceMasks();
 
     /**
-        Globally enable or disable logging.
+        Returns @true if the @a mask is one of allowed masks for wxLogTrace().
 
-        Calling this function with @false argument disables all log messages
-        for the current thread.
+        See also: AddTraceMask(), RemoveTraceMask()
+    */
+    static bool IsAllowedTraceMask(const wxString& mask);
 
-        @see wxLogNull, IsEnabled()
+    /**
+        Remove the @a mask from the list of allowed masks for
+        wxLogTrace().
 
-        @return
-            The old state, i.e. @true if logging was previously enabled and
-            @false if it was disabled.
-     */
-    static bool EnableLogging(bool enable = true);
+        @see AddTraceMask()
+    */
+    static void RemoveTraceMask(const wxString& mask);
+    
+    //@}
 
-    /**
-        Shows all the messages currently in buffer and clears it.
 
-        If the buffer is already empty, nothing happens.
 
-        If you override this method in a derived class, call the base class
-        version first, before doing anything else.
+    /**
+        @name Log target functions
     */
-    virtual void Flush();
-
+    //@{
+    
     /**
-        Flushes the current log target if any, does nothing if there is none.
+        Instructs wxLog to not create new log targets on the fly if there is none
+        currently (see GetActiveTarget()). 
+        
+        (Almost) for internal use only: it is supposed to be called by the
+        application shutdown code (where you don't want the log target to be
+        automatically created anymore).
 
-        When this method is called from the main thread context, it also
-        flushes any previously buffered messages logged by the other threads.
-        When it is called from the other threads it simply calls Flush() on the
-        currently active log target, so it mostly makes sense to do this if a
-        thread has its own logger set with SetThreadActiveTarget().
+        Note that this function also calls ClearTraceMasks().
     */
-    static void FlushActive();
+    static void DontCreateOnDemand();
 
     /**
         Returns the pointer to the active log target (may be @NULL).
@@ -799,57 +687,95 @@ public:
     static wxLog* GetActiveTarget();
 
     /**
-        Returns the current log level limit.
+        Sets the specified log target as the active one.
 
-        All messages at levels strictly greater than the value returned by this
-        function are not logged at all.
+        Returns the pointer to the previous active log target (may be @NULL).
+        To suppress logging use a new instance of wxLogNull not @NULL.  If the
+        active log target is set to @NULL a new default log target will be
+        created when logging occurs.
 
-        @see SetLogLevel(), IsLevelEnabled()
+        @see SetThreadActiveTarget()
     */
-    static wxLogLevel GetLogLevel();
+    static wxLog* SetActiveTarget(wxLog* logtarget);
 
     /**
-        Returns whether the repetition counting mode is enabled.
-    */
-    static bool GetRepetitionCounting();
+        Sets a thread-specific log target.
 
-    /**
-        Returns the current timestamp format string.
-    */
-    static const wxString& GetTimestamp();
+        The log target passed to this function will be used for all messages
+        logged by the current thread using the usual wxLog functions. This
+        shouldn't be called from the main thread which never uses a thread-
+        specific log target but can be used for the other threads to handle
+        thread logging completely separately; instead of buffering thread log
+        messages in the main thread logger.
 
-    /**
-        @deprecated
-        Returns the current trace mask, see Customization() section for details.
-    */
-    static wxTraceMask GetTraceMask();
+        Notice that unlike for SetActiveTarget(), wxWidgets does not destroy
+        the thread-specific log targets when the thread terminates so doing
+        this is your responsibility.
+
+        This method is only available if @c wxUSE_THREADS is 1, i.e. wxWidgets
+        was compiled with threads support.
+
+        @param logger
+            The new thread-specific log target, possibly @NULL.
+        @return
+            The previous thread-specific log target, initially @NULL.
 
+        @since 2.9.1
+     */
+    static wxLog *SetThreadActiveTarget(wxLog *logger);
+    
     /**
-        Returns the currently allowed list of string trace masks.
+        Flushes the current log target if any, does nothing if there is none.
 
-        @see AddTraceMask().
+        When this method is called from the main thread context, it also
+        flushes any previously buffered messages logged by the other threads.
+        When it is called from the other threads it simply calls Flush() on the
+        currently active log target, so it mostly makes sense to do this if a
+        thread has its own logger set with SetThreadActiveTarget().
     */
-    static const wxArrayString& GetTraceMasks();
-
+    static void FlushActive();
+    
     /**
-        Returns whether the verbose mode is currently active.
+        Resumes logging previously suspended by a call to Suspend().
+        All messages logged in the meanwhile will be flushed soon.
     */
-    static bool GetVerbose();
+    static void Resume();
 
     /**
-        Returns @true if the @a mask is one of allowed masks for wxLogTrace().
+        Suspends the logging until Resume() is called.
 
-        See also: AddTraceMask(), RemoveTraceMask()
+        Note that the latter must be called the same number of times as the former
+        to undo it, i.e. if you call Suspend() twice you must call Resume() twice as well.
+
+        Note that suspending the logging means that the log sink won't be be flushed
+        periodically, it doesn't have any effect if the current log target does the
+        logging immediately without waiting for Flush() to be called (the standard
+        GUI log target only shows the log dialog when it is flushed, so Suspend()
+        works as expected with it).
+
+        @see Resume(), wxLogNull
     */
-    static bool IsAllowedTraceMask(const wxString& mask);
+    static void Suspend();
+    
+    //@}
+    
+
 
     /**
-        Returns true if logging is enabled at all now.
+        @name Log level functions
+    */
+    //@{
+    
+    /**
+        Returns the current log level limit.
 
-        @see IsLevelEnabled(), EnableLogging()
-     */
-    static bool IsEnabled();
+        All messages at levels strictly greater than the value returned by this
+        function are not logged at all.
 
+        @see SetLogLevel(), IsLevelEnabled()
+    */
+    static wxLogLevel GetLogLevel();
+    
     /**
         Returns true if logging at this level is enabled for the current thread.
 
@@ -863,32 +789,6 @@ public:
      */
     static bool IsLevelEnabled(wxLogLevel level, wxString component);
 
-    /**
-        Remove the @a mask from the list of allowed masks for
-        wxLogTrace().
-
-        @see AddTraceMask()
-    */
-    static void RemoveTraceMask(const wxString& mask);
-
-    /**
-        Resumes logging previously suspended by a call to Suspend().
-        All messages logged in the meanwhile will be flushed soon.
-    */
-    static void Resume();
-
-    /**
-        Sets the specified log target as the active one.
-
-        Returns the pointer to the previous active log target (may be @NULL).
-        To suppress logging use a new instance of wxLogNull not @NULL.  If the
-        active log target is set to @NULL a new default log target will be
-        created when logging occurs.
-
-        @see SetThreadActiveTarget()
-    */
-    static wxLog* SetActiveTarget(wxLog* logtarget);
-
     /**
         Sets the log level for the given component.
 
@@ -918,39 +818,53 @@ public:
         @see SetComponentLevel()
     */
     static void SetLogLevel(wxLogLevel logLevel);
+    
+    //@}
+
+
 
     /**
-        Enables logging mode in which a log message is logged once, and in case exactly
-        the same message successively repeats one or more times, only the number of
-        repetitions is logged.
+        @name Enable/disable features functions
     */
-    static void SetRepetitionCounting(bool repetCounting = true);
-
+    //@{
+    
     /**
-        Sets a thread-specific log target.
-
-        The log target passed to this function will be used for all messages
-        logged by the current thread using the usual wxLog functions. This
-        shouldn't be called from the main thread which never uses a thread-
-        specific log target but can be used for the other threads to handle
-        thread logging completely separately; instead of buffering thread log
-        messages in the main thread logger.
+        Globally enable or disable logging.
 
-        Notice that unlike for SetActiveTarget(), wxWidgets does not destroy
-        the thread-specific log targets when the thread terminates so doing
-        this is your responsibility.
+        Calling this function with @false argument disables all log messages
+        for the current thread.
 
-        This method is only available if @c wxUSE_THREADS is 1, i.e. wxWidgets
-        was compiled with threads support.
+        @see wxLogNull, IsEnabled()
 
-        @param logger
-            The new thread-specific log target, possibly @NULL.
         @return
-            The previous thread-specific log target, initially @NULL.
+            The old state, i.e. @true if logging was previously enabled and
+            @false if it was disabled.
+     */
+    static bool EnableLogging(bool enable = true);
 
-        @since 2.9.1
+    /**
+        Returns true if logging is enabled at all now.
+
+        @see IsLevelEnabled(), EnableLogging()
      */
-    static wxLog *SetThreadActiveTarget(wxLog *logger);
+    static bool IsEnabled();
+    
+    /**
+        Returns whether the repetition counting mode is enabled.
+    */
+    static bool GetRepetitionCounting();
+
+    /**
+        Enables logging mode in which a log message is logged once, and in case exactly
+        the same message successively repeats one or more times, only the number of
+        repetitions is logged.
+    */
+    static void SetRepetitionCounting(bool repetCounting = true);
+    
+    /**
+        Returns the current timestamp format string.
+    */
+    static const wxString& GetTimestamp();
 
     /**
         Sets the timestamp format prepended by the default log targets to all
@@ -966,35 +880,39 @@ public:
         @since 2.9.0
     */
     static void DisableTimestamp();
-
+    
     /**
-        @deprecated
-        Sets the trace mask, see @ref log_tracemasks section for details.
+        Returns whether the verbose mode is currently active.
     */
-    static void SetTraceMask(wxTraceMask mask);
+    static bool GetVerbose();
 
     /**
         Activates or deactivates verbose mode in which the verbose messages are
         logged as the normal ones instead of being silently dropped.
+        
+        The verbose messages are the trace messages which are not disabled in the
+        release mode and are generated by wxLogVerbose().
+        
+        @see @ref overview_log
     */
     static void SetVerbose(bool verbose = true);
+    
+    //@}
+    
+    
 
     /**
-        Suspends the logging until Resume() is called.
-
-        Note that the latter must be called the same number of times as the former
-        to undo it, i.e. if you call Suspend() twice you must call Resume() twice as well.
-
-        Note that suspending the logging means that the log sink won't be be flushed
-        periodically, it doesn't have any effect if the current log target does the
-        logging immediately without waiting for Flush() to be called (the standard
-        GUI log target only shows the log dialog when it is flushed, so Suspend()
-        works as expected with it).
+        Some of wxLog implementations, most notably the standard wxLogGui class,
+        buffer the messages (for example, to avoid showing the user a zillion of modal
+        message boxes one after another -- which would be really annoying).
+        This function shows them all and clears the buffer contents.
+        If the buffer is already empty, nothing happens.
 
-        @see Resume(), wxLogNull
+        If you override this method in a derived class, call the base class
+        version first, before doing anything else.
     */
-    static void Suspend();
-
+    virtual void Flush();
+    
     /**
         Log the given record.