Undo the link creation in builddir. contrib is still going to be

here for a while so there isn't much paydirt in working around the
problems on platforms with limited filesystems at this stage.

git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@29341 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775

diff --git a/configure b/configure
index afafcc195a9f8e30969da41aea3230b384081d0e..f066eab024f15752aae70f1ff0eecfa339554361 100755 (executable)
--- a/configure
+++ b/configure
@@ -40908,10 +40908,6 @@ fi
                    "
 
 
-          ac_config_links="$ac_config_links include/wx-$WX_RELEASE$WX_FLAVOUR:include"
-
-          ac_config_links="$ac_config_links contrib/include"
-
 
 
 if test "$wxUSE_GUI" = "yes"; then
@@ -41495,9 +41491,6 @@ $config_files
 Configuration headers:
 $config_headers
 
-Configuration links:
-$config_links
-
 Configuration commands:
 $config_commands
 
@@ -41625,8 +41618,6 @@ do
   "version-script" ) CONFIG_FILES="$CONFIG_FILES version-script" ;;
   "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
   "$mk" ) CONFIG_FILES="$CONFIG_FILES $mk" ;;
-  "include/wx-$WX_RELEASE$WX_FLAVOUR" ) CONFIG_LINKS="$CONFIG_LINKS include/wx-$WX_RELEASE$WX_FLAVOUR:include" ;;
-  "contrib/include" ) CONFIG_LINKS="$CONFIG_LINKS contrib/include" ;;
   "wx-config" ) CONFIG_COMMANDS="$CONFIG_COMMANDS wx-config" ;;
   "lib/wx/include/${TOOLCHAIN_FULLNAME}/wx/setup.h" ) CONFIG_HEADERS="$CONFIG_HEADERS lib/wx/include/${TOOLCHAIN_FULLNAME}/wx/setup.h:setup.h.in" ;;
   *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
@@ -41642,7 +41633,6 @@ done
 if $ac_need_defaults; then
   test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
   test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-  test "${CONFIG_LINKS+set}" = set || CONFIG_LINKS=$config_links
   test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
 fi
 
@@ -42477,144 +42467,6 @@ done
 _ACEOF
 cat >>$CONFIG_STATUS <<\_ACEOF
 
-#
-# CONFIG_LINKS section.
-#
-
-for ac_file in : $CONFIG_LINKS; do test "x$ac_file" = x: && continue
-  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-
-  { echo "$as_me:$LINENO: linking $srcdir/$ac_source to $ac_dest" >&5
-echo "$as_me: linking $srcdir/$ac_source to $ac_dest" >&6;}
-
-  if test ! -r $srcdir/$ac_source; then
-    { { echo "$as_me:$LINENO: error: $srcdir/$ac_source: file not found" >&5
-echo "$as_me: error: $srcdir/$ac_source: file not found" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  rm -f $ac_dest
-
-  # Make relative symlinks.
-  ac_dest_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$ac_dest" : 'X\(//\)[^/]' \| \
-        X"$ac_dest" : 'X\(//\)$' \| \
-        X"$ac_dest" : 'X\(/\)' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-         /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-         /^X\(\/\/\)$/{ s//\1/; q; }
-         /^X\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dest_dir"
-  else
-    as_dir="$ac_dest_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$as_dir" : 'X\(//\)[^/]' \| \
-        X"$as_dir" : 'X\(//\)$' \| \
-        X"$as_dir" : 'X\(/\)' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-         /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-         /^X\(\/\/\)$/{ s//\1/; q; }
-         /^X\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dest_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dest_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dest_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dest_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dest_dir";;
-*)
-  case "$ac_dest_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dest_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dest_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-
-  case $srcdir in
-  [\\/$]* | ?:[\\/]* ) ac_rel_source=$srcdir/$ac_source ;;
-      *) ac_rel_source=$ac_top_builddir$srcdir/$ac_source ;;
-  esac
-
-  # Try a symlink, then a hard link, then a copy.
-  ln -s $ac_rel_source $ac_dest 2>/dev/null ||
-    ln $srcdir/$ac_source $ac_dest 2>/dev/null ||
-    cp -p $srcdir/$ac_source $ac_dest ||
-    { { echo "$as_me:$LINENO: error: cannot link or copy $srcdir/$ac_source to $ac_dest" >&5
-echo "$as_me: error: cannot link or copy $srcdir/$ac_source to $ac_dest" >&2;}
-   { (exit 1); exit 1; }; }
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
 #
 # CONFIG_COMMANDS section.
 #

diff --git a/configure.in b/configure.in
index 1e2634bdcfa6f349bc5fa50841ddc502f04bbf85..bda2ce3cfa19a7623cfb68bf1056beb1f7f0ecd3 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -6139,8 +6139,12 @@ AC_CONFIG_COMMANDS([ wx-config
                      LN_S="${LN_S}"
                    ])
 
-AC_CONFIG_LINKS([ include/wx-$WX_RELEASE$WX_FLAVOUR:include ])
-AC_CONFIG_LINKS([ contrib/include ])
+dnl This would give us us build dir that in every significant way
+dnl resembles an installed wx in prefix=$builddir.  It is troublesome
+dnl though in this form because AC_CONFIG_LINKS will fail for directories
+dnl on platforms that do not have symlinks.
+dnl AC_CONFIG_LINKS([ include/wx-$WX_RELEASE$WX_FLAVOUR:include ])
+dnl AC_CONFIG_LINKS([ contrib/include ])
 
 
 dnl Configure samples, contrib etc. directories, but only if they are present:

diff --git a/wx-config-inplace.in b/wx-config-inplace.in
index 54d6772a78b4d972a1f818c9d06e7635a8486a67..28969c3eb55ed2469c30226466d000d6155140a3 100644 (file)
--- a/wx-config-inplace.in
+++ b/wx-config-inplace.in
@@ -14,13 +14,18 @@
 # local tree by default and then source the real wx-config if it all still
 # looks sane.
 
-this_prefix=$( cd "@abs_top_builddir@" 2> /dev/null && pwd )
+check_dirname()
+{
+    if [ ! -d "$1" ]; then
+        printf "\n  *** Error: Directory '$1'\n"    1>&2
+        printf "             no longer exists.\n\n" 1>&2
+        exit 1
+    fi
+    ( cd $1 && pwd )
+}
 
-if [ -z "$this_prefix" ]; then
-    printf "\n  *** Error: Directory '@abs_top_builddir@'\n" 1>&2
-    printf "             no longer exists.\n\n"              1>&2
-    exit 1
-fi
+this_prefix=$(check_dirname "@abs_top_srcdir@")         || exit
+this_exec_prefix=$(check_dirname "@abs_top_builddir@")  || exit
 
-. "$this_prefix/lib/wx/config/@TOOLCHAIN_FULLNAME@"
+. "$this_exec_prefix/lib/wx/config/@TOOLCHAIN_FULLNAME@"
 

diff --git a/wx-config.in b/wx-config.in
index e7e0fb13fd7fb578134221c6185a047e86c33efb..b1d19c82095c31b5f8d740d29b967eb09dd6185a 100755 (executable)
--- a/wx-config.in
+++ b/wx-config.in
@@ -311,7 +311,7 @@ get_mask()
 
 # Determine the base directories we require.
 prefix=${input_option_prefix-${this_prefix:-@prefix@}}
-exec_prefix=${input_option_exec_prefix-${input_option_prefix-@exec_prefix@}}
+exec_prefix=${input_option_exec_prefix-${input_option_prefix-${this_exec_prefix:-@exec_prefix@}}}
 wxconfdir="@libdir@/wx/config"
 
 installed_configs=$( cd "$wxconfdir" 2> /dev/null && ls | grep -v "^inplace-" )
@@ -708,7 +708,7 @@ fi
 # tree prefix to provide the correct output for using this
 # uninstalled wx build.  Or put more simply:
 prefix=${this_prefix-$prefix}
-exec_prefix=${this_prefix-$exec_prefix}
+exec_prefix=${this_exec_prefix-$exec_prefix}
 
 includedir="@includedir@"
 libdir="@libdir@"
@@ -883,9 +883,14 @@ fi
 
 [ -n "$this_linkage"   ] || _static_cppflags="@TOOLCHAIN_DLL_DEFS@"
 [ "$using_gui" = "yes" ] || _gui_cppflags="-DwxUSE_GUI=0"
-[ -z "$this_prefix"    ] || _intree_cppflags="-I${prefix}/contrib/include"
 
-_cppflags=$(echo "-I${libdir}/wx/include/@TOOLCHAIN_FULLNAME@ -I${includedir}/wx-@WX_RELEASE@@WX_FLAVOUR@" $_intree_cppflags "@WXDEBUG_DEFINE@" "@TOOLCHAIN_DEFS@" $_static_cppflags $_gui_cppflags "@WXCONFIG_INCLUDE@" "@WX_LARGEFILE_FLAGS@" "@GCC_PRAGMA_FLAGS@")  
+if [ -n "$this_prefix" ]; then
+    _include_cppflags="-I${includedir} -I${prefix}/contrib/include"
+else
+    _include_cppflags="-I${includedir}/wx-@WX_RELEASE@@WX_FLAVOUR@"
+fi
+
+_cppflags=$(echo "-I${libdir}/wx/include/@TOOLCHAIN_FULLNAME@" $_include_cppflags "@WXDEBUG_DEFINE@" "@TOOLCHAIN_DEFS@" $_static_cppflags $_gui_cppflags "@WXCONFIG_INCLUDE@" "@WX_LARGEFILE_FLAGS@" "@GCC_PRAGMA_FLAGS@")  
 
 # now without further ado, we can answer these too.
 [ -z "$output_option_cppflags" ] || echo $_cppflags