Added "metal" theme.

[wxWidgets.git] / docs / motif / install.txt

diff --git a/docs/motif/install.txt b/docs/motif/install.txt
index f1269cfc7c1e3e8aaa76b33d4eeabea35e77e3b5..2cbb7cb91d12978911eae1ff4e9a9ae46f294d44 100644 (file)
--- a/docs/motif/install.txt
+++ b/docs/motif/install.txt
@@ -1,4 +1,4 @@
-wxWindows 2.1 for Motif installation
+wxWindows 2.3 for Motif installation

 ------------------------------------
 
 IMPORTANT NOTE:
 ------------------------------------
 
 IMPORTANT NOTE:


@@ -11,7 +11,7 @@ IMPORTANT NOTE:
   
   When sending bug reports tell us what version of wxWindows you are 
   using (including the beta) and what compiler on what system. One 
   
   When sending bug reports tell us what version of wxWindows you are 
   using (including the beta) and what compiler on what system. One 

-  example: wxMotif 2.1 beta 6, egcs 1.1.1, Redhat 5.0
+  example: wxMotif 2.3.0, egcs 1.1.1, Redhat 5.0

 
 First steps
 -----------
 
 First steps
 -----------


@@ -19,30 +19,25 @@ First steps
 - Prerequisites: Motif 1.2 or above, or Lesstif
   (not yet tested). Motif 2.0 and above may also be suitable.
 
 - Prerequisites: Motif 1.2 or above, or Lesstif
   (not yet tested). Motif 2.0 and above may also be suitable.
 

-- Download the appropriate .tgz archive, or alternatively the files
-  wx2_x_y_gen.zip and wx2_x_y_mot.zip. Download documentation in a
-  preferred format, such as wx2_x_y_htm.zip or wx2_x_y_pdf.zip.
+- Download wxMotif-x.y.z.tgz, where x.y.z is the version number.
+  Download documentation in a preferred format, such as
+  wxWindows-HTML.zip or wxWindows-PDF.zip.

 
 - Make a directory such as ~/wx and unarchive the files into this
 
 - Make a directory such as ~/wx and unarchive the files into this

-  directory. If using the zip archives, use the -a option if available
-  to convert the ASCII files to Unix format. Don't worry about files being
-  overwritten: they should be identical anyway.
-
-  (See http://www.cdrom.com/pub/infozip/ if you don't have zip/unzip
-  already installed. Zip isn't the same as gzip!)
+  directory.

 
 - It is recommended that you install bison and flex; using yacc
   and lex may require tweaking of the makefiles. You also need
   libXpm (see comments in the Notes section below) if you want to have
   XPM support in wxWindows (recommended).
 
 
 - It is recommended that you install bison and flex; using yacc
   and lex may require tweaking of the makefiles. You also need
   libXpm (see comments in the Notes section below) if you want to have
   XPM support in wxWindows (recommended).
 

-- You now have the option of using the configure-based system, or the simple
-  makefile system.
+- You can now use configure to build wxWindows and the samples.

 
   Using configure is the recommended way to build the library. If it doesn't
   work for you for whatever reason, please report it (together with detailed
   information about your platform and the (relevant part of) contents of
 
   Using configure is the recommended way to build the library. If it doesn't
   work for you for whatever reason, please report it (together with detailed
   information about your platform and the (relevant part of) contents of

-  config.log file) to wxwin-developers@wx.dent.med.uni-muenchen.de.
+  config.log file) to wx-dev@lists.wxwindows.org.
+

 
 COMPILING USING CONFIGURE
 =========================
 
 COMPILING USING CONFIGURE
 =========================


@@ -180,6 +175,49 @@ exit
 NB: DO NOT COMPILE WXGTK WITH GCC AND THREADS, SINCE ALL PROGRAMS WILL
 CRASH UPON START-UP! Just always use egcs and be happy.
 
 NB: DO NOT COMPILE WXGTK WITH GCC AND THREADS, SINCE ALL PROGRAMS WILL
 CRASH UPON START-UP! Just always use egcs and be happy.
 

+* Building wxGTK on OS/2
+--------------------------
+
+Please send comments and question about the OS/2 installation
+to Andrea Venturoli <a.ventu@flashnet.it> and patches to
+the wxWindows mailing list.
+
+You'll need OS/2 Warp (4.00FP#6), X-Free86/2 (3.3.3 or newer), 
+Lesstif (0.89.1 or newer), emx (0.9d fix 1), flex (2.5.4),
+yacc (1.8), unix like shell, e.g. korn shell (5.2.13),
+Autoconf (2.13),  GNU file utilities (3.6),
+GNU text utilities (1.3), GNU shell utilites (1.12), m4 (1.4), 
+sed (2.05), grep (2.0), Awk (3.0.3), GNU Make (3.76.1).
+
+Open an OS/2 prompt and switch to the directory above.
+First set some global environment variables we need:
+
+SET CXXFLAGS=-Zmtd -D__ST_MT_ERRNO__
+SET CFLAGS=-Zmtd -D__ST_MT_ERRNO__
+SET OSTYPE=OS2X              
+SET COMSPEC=sh
+
+Notice you can choose whatever you want, if you don't like OS2X.
+
+Now, run autoconf in the main directory and in the samples, demos
+and utils subdirectory. This will generate the OS/2 specific
+versions of the configure scripts. Now run
+    configure --with-motif
+as described above.
+
+To verify Lesstif installation, configure will try to compile a
+sample program that requires X headers/libraries to be either
+available via C_INCLUDE_PATH and LIBRARY_PATH or you need to
+explicitly set CFLAGS prior to running configure.
+
+If you have pthreads library installed, it will be autodetected
+and the library will be compiled with thread-support.
+
+Note that configure assumes your flex will generate files named
+"lexyy.c", not "lex.yy.c". If you have a version which does
+generate "lex.yy.c", you need to manually change the generated
+makefile.
+

 * Building wxMotif on SGI
 --------------------------
 
 * Building wxMotif on SGI
 --------------------------
 


@@ -205,10 +243,10 @@ Usage:
        ./configure options
 
 If you want to use system's C and C++ compiler,
        ./configure options
 
 If you want to use system's C and C++ compiler,

-set environment variables CC and CCC as
+set environment variables CXX and CC as

 
        % setenv CC cc
 
        % setenv CC cc

-       % setenv CCC CC
+       % setenv CXX CC

        % ./configure options
 
 to see all the options please use:
        % ./configure options
 
 to see all the options please use:


@@ -315,7 +353,7 @@ are
        
        --without-libjpeg       Disables JPEG image format code.
        
        
        --without-libjpeg       Disables JPEG image format code.
        

-       --without-odbc          Disables ODBC code.
+{      --without-odbc          Disables ODBC code. Not yet. }

        
         --disable-resources     Disables the use of *.wxr type
                                resources.
        
         --disable-resources     Disables the use of *.wxr type
                                resources.


@@ -394,13 +432,13 @@ g++ myfoo.cpp `wx-config --libs` `wx-config --cflags` -o myfoo
 Using this way, a make file for the minimal sample would look
 like this
 
 Using this way, a make file for the minimal sample would look
 like this
 

-CC = g++
+CXX = g++

 
 minimal: minimal.o
 
 minimal: minimal.o

-    $(CC) -o minimal minimal.o `wx-config --libs` 
+    $(CXX) -o minimal minimal.o `wx-config --libs` 

 
 minimal.o: minimal.cpp mondrian.xpm
 
 minimal.o: minimal.cpp mondrian.xpm

-    $(CC) `wx-config --cflags` -c minimal.cpp -o minimal.o
+    $(CXX) `wx-config --cflags` -c minimal.cpp -o minimal.o

 
 clean: 
        rm -f *.o minimal
 
 clean: 
        rm -f *.o minimal


@@ -440,51 +478,9 @@ and configure before you can type make.
   This script will build wxMotif using shared libraries. If you want to build
   a static wxWindows library, use --disable-shared.
 
   This script will build wxMotif using shared libraries. If you want to build
   a static wxWindows library, use --disable-shared.
 

-COMPILING USING MAKEFILES
-=========================
-
-- Copy the file include/wx/motif/setup0.h to include/wx/motif/setup.h and
-  edit it if you wish to enable/disable some library features
-
-- Choose a .env file from src/makeenvs that matches your
-  environment, and copy it to src/make.env. These are the
-  settings read by wxWindows for Motif makefiles.
-
-- Edit src/make.env to change options according to your local
-  environment. In particular, change WXDIR to where wxWindows is
-  found on your system, or set the WXWIN environment variable
-  before compilation, e.g.:
-
-    export WXWIN=/home/jacs/wx2
-
-  Please feel free to contribute settings files for your environment.
-
-- Change directory to src/motif and type:
-
-    make -f makefile.unx motif
-
-  This should make the library libwx_motif.a in the lib
-  directory. Note that this makefile system does not build shared
-  libraries, only static ones (that is, the wxWindows library will be
-  linked statically; to see remaining dependencies on shared libraries,
-  type e.g. ldd minimal_motif).
-
-- Make a sample, such as the minimal sample:
-
-    cd samples/minimal
-    make -f makefile.unx motif
-
-  and run the resulting minimal_motif binary.
-

 Troubleshooting
 ---------------
 
 Troubleshooting
 ---------------
 

-- If you have trouble compiling the file y_tab.c, or have strange
-  linking errors, check whether you're using a C or C++ compiler for this file.
-  You should specify a C compiler in the CCLEX variable in src/make.env.
-  You could also try using bison and flex instead of yacc and
-  lex.
-

 - Solaris compilation with gcc: if the compiler has problems with the variable argument
   functions, try putting the gcc fixinclude file paths early in the include
   path.
 - Solaris compilation with gcc: if the compiler has problems with the variable argument
   functions, try putting the gcc fixinclude file paths early in the include
   path.


@@ -501,15 +497,6 @@ Troubleshooting
   possible temporary workaround (comment out the final
   XtDestroyWidget from ~wxWindow in window.cpp).
 
   possible temporary workaround (comment out the final
   XtDestroyWidget from ~wxWindow in window.cpp).
 

-- If you use flex and bison instead of yacc and lex, you may need
-  to change the relevant part of src/motif/makefile.unx to read:
-
-  ../common/y_tab.c: ../common/parser.y
-     $(YACC) ../common/parser.y
-     mv ../common/parser.tab.c ../common/y_tab.c
-
-  (the 'mv' command needs to be changed)
-

 - Some compilers, such as Sun C++, may give a lot of warnings about
   virtual functions being hidden. Please ignore these, it's correct C++ syntax.
   If you find any incorrect instances, though, such as a
 - Some compilers, such as Sun C++, may give a lot of warnings about
   virtual functions being hidden. Please ignore these, it's correct C++ syntax.
   If you find any incorrect instances, though, such as a


@@ -527,41 +514,13 @@ Other Notes
   and --with-debug_info to --without-debug_info in the makewxmotif
   script).
 
   and --with-debug_info to --without-debug_info in the makewxmotif
   script).
 

-- Some classes can be switched off in include/wx/motif/setup.h,
-  if you are having trouble with a particular file. However,
-  I'd prefer you to fix the problem and send the fix to me :-) or at
-  least let me know about it.
-
-- Thread support is switched off by default in setup.h (wxUSE_THREADS)
-  because standard Unices often do not have the necessary thread library
-  installed. Please see ../docs/gtk/install.txt for more details on this.
-  The systems for which thread support is known to work are Linux with libc6
-  (a.k.a. glibc2), Solaris 2.5 and 2.6 (provided that X libraries are thread
-  safe) and, to some extent, FreeBSD 2.8 and 3.1 (any feedback on thread
-  support under FreeBSD as well as the systems not mentioned here would be
-  appreciated).
-
-- If you run into problems with a missing X11/Xpm.h header, you
-  need to install the XPM package. It can be obtained from:
-
-  ftp://ftp.x.org/contrib/libraries/xpm-3.4k.tar.gz
-  http://sunfreeware.com
-
-  You may need to modify make.env to add -I and -L options pointing to where Xpm
-  is installed and possibly change bitmap.cpp to
-  include <xpm.h> instead of <X11/xpm.h>
-
-  Alternatively, edit include/wx/motif/setup.h, set wxUSE_XPM
-  to 0, and recompile. You will not be able to load any XPMs,
-  though (currently the only supported colour bitmap format).
-

 Bug reports
 -----------
 
 Please send bug reports with a description of your environment,
 compiler and the error message(s) to the wxwin-developers mailing list at:
 
 Bug reports
 -----------
 
 Please send bug reports with a description of your environment,
 compiler and the error message(s) to the wxwin-developers mailing list at:
 

-    wxwin-developers@wx.dent.med.uni-muenchen.de
+    wx-dev@lists.wxwindows.org

 
 Julian Smart, Robert Roebling and Vadim Zeitlin, November 1999.
 
 
 Julian Smart, Robert Roebling and Vadim Zeitlin, November 1999.