misc/imlib/imrc

   1 ################################
   2 #    Config file for Imlib     #
   3 ################################
   4
   5 # The file that contains palette entries for a global palette for all Imlib
   6 # based programs.
   7 # options: full path to palette file
   8 PaletteFile                       ~/im_palette.pal
   9 # This defines if when the display is greater than 8 bit, that it still remaps
  10 # the images to the palette defined, rather than using "perfect" rendering
  11 # options: yes/no
  12 PaletteOverride                   no
  13 # If remapping to the palette, whether to use Floyd-Steinberg dithering. Saying
  14 # yes will slow things down though.
  15 # options: yes/no
  16 Dither                            yes
  17 # when remapping to the palette, saying fast will reduce accuracy, but improve
  18 # speed quite considerably
  19 # options: fast/slow
  20 Remap                             fast
  21 # This turns on dithering for 15/16 bpp. This makes smooth gradients look much
  22 # smoother - in fact almost perfect. You will find it nigh impossible to tell
  23 # the difference between 15/16bpp dithered and 24bpp. Unless you have extra
  24 # CPU to burn, its not recommended, unless you are a image quality freak, and
  25 # you insist on maximum quality in 15/16bpp. It does slow things down. It
  26 # would be best to leave it off and let the applications themselves allow
  27 # you to select it for certain purposes only.
  28 HighQuality                       off
  29 # This option if specified off will force MIT-SHM off, otherwise will allow
  30 # Imlib to work it out itself.
  31 Mit-Shm                           on
  32 # This will turn shared pixmaps on or off (off forces off, on lets imlib
  33 # work it out). This is yet another speedup. leave it on unless it doesn't
  34 # work.. then turn it off.
  35 SharedPixmaps                     off
  36 # This speeds up rendering considerably, but may not work on your hardware
  37 # due to it bypassing a few layers and byte-twiddling the rendered image data
  38 # manually, and due to endianess, bit-ordering or RGB ordering it may screw up
  39 # and not work, so try it.. if things work great!, if not, wait until a
  40 # renderer for your situation is written, or write one yourself and donate
  41 # it. It's easy to do, just look at rend.c
  42 FastRender                        on
  43 # This is in fact a workaround due to Solaris's shared memory theories.
  44 # This specifies the maximum size of a shared memory chunk in bytes. If an
  45 # image is larger that this in bytes for the video mode you're in, imlib will
  46 # not use MIT-SHM. if you comment this out, imlib will use as much memory as
  47 # necessary to render the image.
  48 # Shm_Max_Size                      1000000
  49 # This turns Image loading (24) bit caching on or off. HIGHLY suggested to be
  50 # turned ON!
  51 Image_Cache                       on
  52 # Image cache size in bytes.  As with any cache, the more, the better.  If you
  53 # load the same image more than once. Imlib will used a previously loaded
  54 # copy, and if its freed, the Image_Cache_Size amount of bytes of image data
  55 # are kept even after being freed, in case the same image is loaded again soon
  56 # afterwards. Neat eh?
  57 Image_Cache_Size                  4000000
  58 # This turns the pixmap caching system on or off.  If on, only well-behaved
  59 # programs that conform to the specs for using Imlib will exhibit the
  60 # behavior as expected. It is suggested to leave this on, as it will boost
  61 # performance considerably, speed-wise and memory-wise. The reason apps need
  62 # to be well-behaved is so that they don't go drawing on, and XFreePixmap'ing
  63 # these pixmaps themselves, because this will trample all over the cache
  64 # and give very horrid effects, or even make the apps crash with segfaults or
  65 # Xlib errors.
  66 Pixmap_Cache                      on
  67 # Pixmap cache is in **-> BITS <-**... the end result is APPROXIMATELY
  68 # 10000000 bits of pixmap make your Xserver grow by 1Mb of RAM (VERY rough).
  69 # As with any cache, the more, the better. The more you have, the less likely
  70 # it is that you will get cache misses and so performance on scaling the same
  71 # image to commonly used sizes (ie if 3 or 4 sizes of the same image are used)
  72 # will be lightning fast, in fact in some tests I did, in 16bpp up to 38 times
  73 # as fast, and in 8bpp (with dithering on) up to 105 times faster!!! (these
  74 # are nominal figures obtained on my machine. these are MAXIMUM speedup
  75 # results.  Results may vary on other machines and according to the way
  76 # programs are written and use Imlib)
  77 Pixmap_Cache_Size                 40000000
  78 # This FORCES Imlib to use the hexadecimal visual id stated here if it is
  79 # defined in the imrc. This bypasses Imlib's routines that hunt for the best
  80 # visual. You can obtain a list of visual ID's using the xdpyinfo command.
  81 # You should only need this if Imlib doesn't pick the correct visual or you
  82 # have strange hardware/Xserver combinations.
  83 #ForceVisualID                   22
  84 # This allows Imlib to fall back on Imagemagick and/or NETPBM
  85 # utilities if it can't load the file.
  86 Fallback                         on
  87 # Default Gamma, Brightness and Contrast stuff....
  88 Gamma                            1.0
  89 Brightness                       1.0
  90 Contrast                         1.0
  91 Red_Gamma                        1.0
  92 Red_Brightness                   1.0
  93 Red_Contrast                     1.0
  94 Green_Gamma                      1.0
  95 Green_Brightness                 1.0
  96 Green_Contrast                   1.0
  97 Blue_Gamma                       1.0
  98 Blue_Brightness                  1.0
  99 Blue_Contrast                    1.0