]>
git.saurik.com Git - wxWidgets.git/blob - include/wx/osx/setup0.h
1 /////////////////////////////////////////////////////////////////////////////
2 // Name: wx/osx/setup.h
3 // Purpose: Configuration for the library
4 // Author: Stefan Csomor
5 // Modified by: Stefan Csomor
7 // Copyright: (c) Stefan Csomor
8 // Licence: wxWindows licence
9 /////////////////////////////////////////////////////////////////////////////
15 /* --- start common options --- */
16 // ----------------------------------------------------------------------------
18 // ----------------------------------------------------------------------------
20 // define this to 0 when building wxBase library - this can also be done from
21 // makefile/project file overriding the value here
26 // ----------------------------------------------------------------------------
27 // compatibility settings
28 // ----------------------------------------------------------------------------
30 // This setting determines the compatibility with 2.6 API: set it to 0 to
31 // flag all cases of using deprecated functions.
33 // Default is 1 but please try building your code with 0 as the default will
34 // change to 0 in the next version and the deprecated functions will disappear
35 // in the version after it completely.
37 // Recommended setting: 0 (please update your code)
38 #define WXWIN_COMPATIBILITY_2_6 0
40 // This setting determines the compatibility with 2.8 API: set it to 0 to
41 // flag all cases of using deprecated functions.
43 // Default is 1 but please try building your code with 0 as the default will
44 // change to 0 in the next version and the deprecated functions will disappear
45 // in the version after it completely.
47 // Recommended setting: 0 (please update your code)
48 #define WXWIN_COMPATIBILITY_2_8 1
50 // MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when
51 // default system font is used for wxWindow::GetCharWidth/Height() instead of
56 // Recommended setting: 0
57 #define wxDIALOG_UNIT_COMPATIBILITY 0
59 // ----------------------------------------------------------------------------
61 // ----------------------------------------------------------------------------
63 // wxDEBUG_LEVEL will be defined as 1 in wx/debug.h so normally there is no
64 // need to define it here. You may do it for two reasons: either completely
65 // disable/compile out the asserts in release version (then do it inside #ifdef
66 // NDEBUG) or, on the contrary, enable more asserts, including the usually
67 // disabled ones, in the debug build (then do it inside #ifndef NDEBUG)
70 // #define wxDEBUG_LEVEL 0
72 // #define wxDEBUG_LEVEL 2
75 // wxHandleFatalExceptions() may be used to catch the program faults at run
76 // time and, instead of terminating the program with a usual GPF message box,
77 // call the user-defined wxApp::OnFatalException() function. If you set
78 // wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
80 // This setting is for Win32 only and can only be enabled if your compiler
81 // supports Win32 structured exception handling (currently only VC++ does)
85 // Recommended setting: 1 if your compiler supports it.
86 #define wxUSE_ON_FATAL_EXCEPTION 1
88 // Set this to 1 to be able to generate a human-readable (unlike
89 // machine-readable minidump created by wxCrashReport::Generate()) stack back
90 // trace when your program crashes using wxStackWalker
92 // Default is 1 if supported by the compiler.
94 // Recommended setting: 1, set to 0 if your programs never crash
95 #define wxUSE_STACKWALKER 1
97 // Set this to 1 to compile in wxDebugReport class which allows you to create
98 // and optionally upload to your web site a debug report consisting of back
99 // trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
101 // Default is 1 if supported by the compiler.
103 // Recommended setting: 1, it is compiled into a separate library so there
104 // is no overhead if you don't use it
105 #define wxUSE_DEBUGREPORT 1
107 // Generic comment about debugging settings: they are very useful if you don't
108 // use any other memory leak detection tools such as Purify/BoundsChecker, but
109 // are probably redundant otherwise. Also, Visual C++ CRT has the same features
110 // as wxWidgets memory debugging subsystem built in since version 5.0 and you
111 // may prefer to use it instead of built in memory debugging code because it is
112 // faster and more fool proof.
114 // Using VC++ CRT memory debugging is enabled by default in debug build (_DEBUG
115 // is defined) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
116 // and if __NO_VC_CRTDBG__ is not defined.
118 // The rest of the options in this section are obsolete and not supported,
119 // enable them at your own risk.
121 // If 1, enables wxDebugContext, for writing error messages to file, etc. If
122 // __WXDEBUG__ is not defined, will still use the normal memory operators.
126 // Recommended setting: 0
127 #define wxUSE_DEBUG_CONTEXT 0
129 // If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
130 // __WXDEBUG__ is also defined.
132 // WARNING: this code may not work with all architectures, especially if
133 // alignment is an issue. This switch is currently ignored for mingw / cygwin
137 // Recommended setting: 1 if you are not using a memory debugging tool, else 0
138 #define wxUSE_MEMORY_TRACING 0
140 // In debug mode, cause new and delete to be redefined globally.
141 // If this causes problems (e.g. link errors which is a common problem
142 // especially if you use another library which also redefines the global new
143 // and delete), set this to 0.
144 // This switch is currently ignored for mingw / cygwin
148 // Recommended setting: 0
149 #define wxUSE_GLOBAL_MEMORY_OPERATORS 0
151 // In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
152 // this causes problems (e.g. link errors), set this to 0. You may need to set
153 // this to 0 if using templates (at least for VC++). This switch is currently
154 // ignored for MinGW/Cygwin.
158 // Recommended setting: 0
159 #define wxUSE_DEBUG_NEW_ALWAYS 0
162 // ----------------------------------------------------------------------------
164 // ----------------------------------------------------------------------------
166 // These settings are obsolete: the library is always built in Unicode mode
167 // now, only set wxUSE_UNICODE to 0 to compile legacy code in ANSI mode if
168 // absolutely necessary -- updating it is strongly recommended as the ANSI mode
169 // will disappear completely in future wxWidgets releases.
170 #ifndef wxUSE_UNICODE
171 #define wxUSE_UNICODE 1
174 // wxUSE_WCHAR_T is required by wxWidgets now, don't change.
175 #define wxUSE_WCHAR_T 1
177 // ----------------------------------------------------------------------------
179 // ----------------------------------------------------------------------------
181 // Compile library in exception-safe mode? If set to 1, the library will try to
182 // behave correctly in presence of exceptions (even though it still will not
183 // use the exceptions itself) and notify the user code about any unhandled
184 // exceptions. If set to 0, propagation of the exceptions through the library
185 // code will lead to undefined behaviour -- but the code itself will be
186 // slightly smaller and faster.
188 // Note that like wxUSE_THREADS this option is automatically set to 0 if
189 // wxNO_EXCEPTIONS is defined.
193 // Recommended setting: depends on whether you intend to use C++ exceptions
194 // in your own code (1 if you do, 0 if you don't)
195 #define wxUSE_EXCEPTIONS 1
197 // Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
201 // Recommended setting: 0 (this is still work in progress...)
202 #define wxUSE_EXTENDED_RTTI 0
204 // Support for message/error logging. This includes wxLogXXX() functions and
205 // wxLog and derived classes. Don't set this to 0 unless you really know what
210 // Recommended setting: 1 (always)
213 // Recommended setting: 1
214 #define wxUSE_LOGWINDOW 1
216 // Recommended setting: 1
217 #define wxUSE_LOGGUI 1
219 // Recommended setting: 1
220 #define wxUSE_LOG_DIALOG 1
222 // Support for command line parsing using wxCmdLineParser class.
226 // Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
227 #define wxUSE_CMDLINE_PARSER 1
229 // Support for multithreaded applications: if 1, compile in thread classes
230 // (thread.h) and make the library a bit more thread safe. Although thread
231 // support is quite stable by now, you may still consider recompiling the
232 // library without it if you have no use for it - this will result in a
233 // somewhat smaller and faster operation.
235 // Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset
236 // to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
237 // build/msw/config.* file this value will have no effect.
241 // Recommended setting: 0 unless you do plan to develop MT applications
242 #define wxUSE_THREADS 1
244 // If enabled, compiles wxWidgets streams classes
246 // wx stream classes are used for image IO, process IO redirection, network
247 // protocols implementation and much more and so disabling this results in a
248 // lot of other functionality being lost.
252 // Recommended setting: 1 as setting it to 0 disables many other things
253 #define wxUSE_STREAMS 1
255 // Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
256 // Note that if the system's implementation does not support positional
257 // parameters, setting this to 1 forces the use of the wxWidgets implementation
258 // of wxVsnprintf. The standard vsnprintf() supports positional parameters on
259 // many Unix systems but usually doesn't under Windows.
261 // Positional parameters are very useful when translating a program since using
262 // them in formatting strings allow translators to correctly reorder the
263 // translated sentences.
267 // Recommended setting: 1 if you want to support multiple languages
268 #define wxUSE_PRINTF_POS_PARAMS 1
270 // Enable the use of compiler-specific thread local storage keyword, if any.
271 // This is used for wxTLS_XXX() macros implementation and normally should use
272 // the compiler-provided support as it's simpler and more efficient, but must
273 // not use it if wxWidgets is used in a dynamically loaded Win32 (i.e. using
274 // LoadLibrary()/GetProcAddress()) as this triggers a bug in compiler TLS
275 // support that results in crashes when any TLS variables are used. So if you
276 // are building a Win32 DLL using wxWidgets that can be loaded dynamically, set
279 // Default is 1, but set to 0 if the scenario above is applicable.
280 #define wxUSE_COMPILER_TLS 1
282 // ----------------------------------------------------------------------------
283 // Interoperability with the standard library.
284 // ----------------------------------------------------------------------------
286 // Set wxUSE_STL to 1 to enable maximal interoperability with the standard
287 // library, even at the cost of backwards compatibility.
291 // Recommended setting: 0 as the options below already provide a relatively
292 // good level of interoperability and changing this option arguably isn't worth
293 // diverging from the official builds of the library.
296 // This is not a real option but is used as the default value for
297 // wxUSE_STD_IOSTREAM, wxUSE_STD_STRING and wxUSE_STD_CONTAINERS.
299 // Currently the Digital Mars and Watcom compilers come without standard C++
300 // library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
301 // them (e.g. from STLPort).
303 // VC++ 5.0 does include standard C++ library headers, however they produce
304 // many warnings that can't be turned off when compiled at warning level 4.
305 #if defined(__DMC__) || defined(__WATCOMC__) \
306 || (defined(_MSC_VER) && _MSC_VER < 1200)
307 #define wxUSE_STD_DEFAULT 0
309 #define wxUSE_STD_DEFAULT 1
312 // Use standard C++ containers to implement wxVector<>, wxStack<>, wxDList<>
313 // and wxHashXXX<> classes. If disabled, wxWidgets own (mostly compatible but
314 // usually more limited) implementations are used which allows to avoid the
315 // dependency on the C++ run-time library.
317 // Notice that the compilers mentioned in wxUSE_STD_DEFAULT comment above don't
318 // support using standard containers and that VC6 needs non-default options for
319 // such build to avoid getting "fatal error C1076: compiler limit : internal
320 // heap limit reached; use /Zm to specify a higher limit" in its own standard
321 // headers, so you need to ensure you do increase the heap size before enabling
322 // this option for this compiler.
324 // Default is 0 for compatibility reasons.
326 // Recommended setting: 1 unless compatibility with the official wxWidgets
327 // build and/or the existing code is a concern.
328 #define wxUSE_STD_CONTAINERS 0
330 // Use standard C++ streams if 1 instead of wx streams in some places. If
331 // disabled, wx streams are used everywhere and wxWidgets doesn't depend on the
332 // standard streams library.
334 // Notice that enabling this does not replace wx streams with std streams
335 // everywhere, in a lot of places wx streams are used no matter what.
337 // Default is 1 if compiler supports it.
339 // Recommended setting: 1 if you use the standard streams anyhow and so
340 // dependency on the standard streams library is not a
342 #define wxUSE_STD_IOSTREAM wxUSE_STD_DEFAULT
344 // Enable minimal interoperability with the standard C++ string class if 1.
345 // "Minimal" means that wxString can be constructed from std::string or
346 // std::wstring but can't be implicitly converted to them. You need to enable
347 // the option below for the latter.
349 // Default is 1 for most compilers.
351 // Recommended setting: 1 unless you want to ensure your program doesn't use
352 // the standard C++ library at all.
353 #define wxUSE_STD_STRING wxUSE_STD_DEFAULT
355 // Make wxString as much interchangeable with std::[w]string as possible, in
356 // particular allow implicit conversion of wxString to either of these classes.
357 // This comes at a price (or a benefit, depending on your point of view) of not
358 // allowing implicit conversion to "const char *" and "const wchar_t *".
360 // Because a lot of existing code relies on these conversions, this option is
361 // disabled by default but can be enabled for your build if you don't care
362 // about compatibility.
364 // Default is 0 if wxUSE_STL has its default value or 1 if it is enabled.
366 // Recommended setting: 0 to remain compatible with the official builds of
368 #define wxUSE_STD_STRING_CONV_IN_WXSTRING wxUSE_STL
370 // VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
371 // them. Set this option to 1 to use <iostream.h>, 0 to use <iostream>.
373 // Note that newer compilers (including VC++ 7.1 and later) don't support
374 // wxUSE_IOSTREAMH == 1 and so <iostream> will be used anyhow.
378 // Recommended setting: 0, only set to 1 if you use a really old compiler
379 #define wxUSE_IOSTREAMH 0
382 // ----------------------------------------------------------------------------
383 // non GUI features selection
384 // ----------------------------------------------------------------------------
386 // Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
387 // integer which is implemented in terms of native 64 bit integers if any or
388 // uses emulation otherwise.
390 // This class is required by wxDateTime and so you should enable it if you want
391 // to use wxDateTime. For most modern platforms, it will use the native 64 bit
392 // integers in which case (almost) all of its functions are inline and it
393 // almost does not take any space, so there should be no reason to switch it
396 // Recommended setting: 1
397 #define wxUSE_LONGLONG 1
399 // Set wxUSE_BASE64 to 1, to compile in Base64 support. This is required for
400 // storing binary data in wxConfig on most platforms.
404 // Recommended setting: 1 (but can be safely disabled if you don't use it)
405 #define wxUSE_BASE64 1
407 // Set this to 1 to be able to use wxEventLoop even in console applications
408 // (i.e. using base library only, without GUI). This is mostly useful for
409 // processing socket events but is also necessary to use timers in console
414 // Recommended setting: 1 (but can be safely disabled if you don't use it)
415 #define wxUSE_CONSOLE_EVENTLOOP 1
417 // Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
418 // POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
422 // Recommended setting: 1 (wxFile is highly recommended as it is required by
423 // i18n code, wxFileConfig and others)
425 #define wxUSE_FFILE 1
427 // Use wxFSVolume class providing access to the configured/active mount points
431 // Recommended setting: 1 (but may be safely disabled if you don't use it)
432 #define wxUSE_FSVOLUME 1
434 // Use wxStandardPaths class which allows to retrieve some standard locations
435 // in the file system
439 // Recommended setting: 1 (may be disabled to save space, but not much)
440 #define wxUSE_STDPATHS 1
442 // use wxTextBuffer class: required by wxTextFile
443 #define wxUSE_TEXTBUFFER 1
445 // use wxTextFile class: requires wxFile and wxTextBuffer, required by
447 #define wxUSE_TEXTFILE 1
449 // i18n support: _() macro, wxLocale class. Requires wxTextFile.
452 // Provide wxFoo_l() functions similar to standard foo() functions but taking
453 // an extra locale parameter.
455 // Notice that this is fully implemented only for the systems providing POSIX
456 // xlocale support or Microsoft Visual C++ >= 8 (which provides proprietary
457 // almost-equivalent of xlocale functions), otherwise wxFoo_l() functions will
458 // only work for the current user locale and "C" locale. You can use
459 // wxHAS_XLOCALE_SUPPORT to test whether the full support is available.
463 // Recommended setting: 1 but may be disabled if you are writing programs
464 // running only in C locale anyhow
465 #define wxUSE_XLOCALE 1
467 // Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
468 // allow to manipulate dates, times and time intervals. wxDateTime replaces the
469 // old wxTime and wxDate classes which are still provided for backwards
470 // compatibility (and implemented in terms of wxDateTime).
472 // Note that this class is relatively new and is still officially in alpha
473 // stage because some features are not yet (fully) implemented. It is already
474 // quite useful though and should only be disabled if you are aiming at
475 // absolutely minimal version of the library.
477 // Requires: wxUSE_LONGLONG
481 // Recommended setting: 1
482 #define wxUSE_DATETIME 1
484 // Set wxUSE_TIMER to 1 to compile wxTimer class
488 // Recommended setting: 1
489 #define wxUSE_TIMER 1
491 // Use wxStopWatch clas.
495 // Recommended setting: 1 (needed by wxSocket)
496 #define wxUSE_STOPWATCH 1
498 // Set wxUSE_FSWATCHER to 1 if you want to enable wxFileSystemWatcher
502 // Recommended setting: 1
503 #define wxUSE_FSWATCHER 1
505 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
506 // which allow the application to store its settings in the persistent
507 // storage. Setting this to 1 will also enable on-demand creation of the
508 // global config object in wxApp.
510 // See also wxUSE_CONFIG_NATIVE below.
512 // Recommended setting: 1
513 #define wxUSE_CONFIG 1
515 // If wxUSE_CONFIG is 1, you may choose to use either the native config
516 // classes under Windows (using .INI files under Win16 and the registry under
517 // Win32) or the portable text file format used by the config classes under
520 // Default is 1 to use native classes. Note that you may still use
521 // wxFileConfig even if you set this to 1 - just the config object created by
522 // default for the applications needs will be a wxRegConfig or wxIniConfig and
525 // Recommended setting: 1
526 #define wxUSE_CONFIG_NATIVE 1
528 // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
529 // to connect/disconnect from the network and be notified whenever the dial-up
530 // network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
534 // Recommended setting: 1
535 #define wxUSE_DIALUP_MANAGER 1
537 // Compile in classes for run-time DLL loading and function calling.
538 // Required by wxUSE_DIALUP_MANAGER.
540 // This setting is for Win32 only
544 // Recommended setting: 1
545 #define wxUSE_DYNLIB_CLASS 1
547 // experimental, don't use for now
548 #define wxUSE_DYNAMIC_LOADER 1
550 // Set to 1 to use socket classes
551 #define wxUSE_SOCKETS 1
553 // Set to 1 to use ipv6 socket classes (requires wxUSE_SOCKETS)
555 // Notice that currently setting this option under Windows will result in
556 // programs which can only run on recent OS versions (with ws2_32.dll
557 // installed) which is why it is disabled by default.
561 // Recommended setting: 1 if you need IPv6 support
564 // Set to 1 to enable virtual file systems (required by wxHTML)
565 #define wxUSE_FILESYSTEM 1
567 // Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
568 #define wxUSE_FS_ZIP 1
570 // Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM)
571 #define wxUSE_FS_ARCHIVE 1
573 // Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
574 #define wxUSE_FS_INET 1
576 // wxArchive classes for accessing archives such as zip and tar
577 #define wxUSE_ARCHIVE_STREAMS 1
579 // Set to 1 to compile wxZipInput/OutputStream classes.
580 #define wxUSE_ZIPSTREAM 1
582 // Set to 1 to compile wxTarInput/OutputStream classes.
583 #define wxUSE_TARSTREAM 1
585 // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
589 // If enabled, the code written by Apple will be used to write, in a portable
590 // way, float on the disk. See extended.c for the license which is different
591 // from wxWidgets one.
595 // Recommended setting: 1 unless you don't like the license terms (unlikely)
596 #define wxUSE_APPLE_IEEE 1
598 // Joystick support class
599 #define wxUSE_JOYSTICK 1
601 // wxFontEnumerator class
602 #define wxUSE_FONTENUM 1
604 // wxFontMapper class
605 #define wxUSE_FONTMAP 1
607 // wxMimeTypesManager class
608 #define wxUSE_MIMETYPE 1
610 // wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP
611 // or wxURL you need to set this to 1.
615 // Recommended setting: 1
616 #define wxUSE_PROTOCOL 1
618 // The settings for the individual URL schemes
619 #define wxUSE_PROTOCOL_FILE 1
620 #define wxUSE_PROTOCOL_FTP 1
621 #define wxUSE_PROTOCOL_HTTP 1
623 // Define this to use wxURL class.
626 // Define this to use native platform url and protocol support.
627 // Currently valid only for MS-Windows.
628 // Note: if you set this to 1, you can open ftp/http/gopher sites
629 // and obtain a valid input stream for these sites
630 // even when you set wxUSE_PROTOCOL_FTP/HTTP to 0.
631 // Doing so reduces the code size.
633 // This code is experimental and subject to change.
634 #define wxUSE_URL_NATIVE 0
636 // Support for wxVariant class used in several places throughout the library,
637 // notably in wxDataViewCtrl API.
641 // Recommended setting: 1 unless you want to reduce the library size as much as
642 // possible in which case setting this to 0 can gain up to 100KB.
643 #define wxUSE_VARIANT 1
645 // Support for wxAny class, the successor for wxVariant.
649 // Recommended setting: 1 unless you want to reduce the library size by a small amount,
650 // or your compiler cannot for some reason cope with complexity of templates used.
653 // Support for regular expression matching via wxRegEx class: enable this to
654 // use POSIX regular expressions in your code. You need to compile regex
655 // library from src/regex to use it under Windows.
659 // Recommended setting: 1 if your compiler supports it, if it doesn't please
660 // contribute us a makefile for src/regex for it
661 #define wxUSE_REGEX 1
663 // wxSystemOptions class
664 #define wxUSE_SYSTEM_OPTIONS 1
667 #define wxUSE_SOUND 1
673 // Recommended setting: 1
674 #define wxUSE_MEDIACTRL 1
676 // Use wxWidget's XRC XML-based resource system. Recommended.
680 // Recommended setting: 1 (requires wxUSE_XML)
683 // XML parsing classes. Note that their API will change in the future, so
684 // using wxXmlDocument and wxXmlNode in your app is not recommended.
686 // Default is the same as wxUSE_XRC, i.e. 1 by default.
688 // Recommended setting: 1 (required by XRC)
689 #define wxUSE_XML wxUSE_XRC
691 // Use wxWidget's AUI docking system
695 // Recommended setting: 1
698 // Use wxWidget's Ribbon classes for interfaces
702 // Recommended setting: 1
703 #define wxUSE_RIBBON 1
705 // Use wxPropertyGrid.
709 // Recommended setting: 1
710 #define wxUSE_PROPGRID 1
712 // Use wxStyledTextCtrl, a wxWidgets implementation of Scintilla.
716 // Recommended setting: 1
719 // Use wxWidget's web viewing classes
723 // Recommended setting: 1
724 #define wxUSE_WEBVIEW 1
726 // Use the IE wxWebView backend
728 // Default is 1 on MSW
730 // Recommended setting: 1
732 #define wxUSE_WEBVIEW_IE 1
734 #define wxUSE_WEBVIEW_IE 0
737 // Use the WebKit wxWebView backend
739 // Default is 1 on GTK and OSX
741 // Recommended setting: 1
742 #if defined(__WXGTK__) || defined(__WXOSX__)
743 #define wxUSE_WEBVIEW_WEBKIT 1
745 #define wxUSE_WEBVIEW_WEBKIT 0
748 // Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
749 // 2D drawing API. (Still somewhat experimental)
751 // Please note that on Windows gdiplus.dll is loaded dynamically which means
752 // that nothing special needs to be done as long as you don't use
753 // wxGraphicsContext at all or only use it on XP and later systems but you
754 // still do need to distribute it yourself for an application using
755 // wxGraphicsContext to be runnable on pre-XP systems.
757 // Default is 1 except if you're using a non-Microsoft compiler under Windows
758 // as only MSVC7+ is known to ship with gdiplus.h. For other compilers (e.g.
759 // mingw32) you may need to install the headers (and just the headers)
760 // yourself. If you do, change the setting below manually.
762 // Recommended setting: 1 if supported by the compilation environment
764 // notice that we can't use wxCHECK_VISUALC_VERSION() here as this file is
765 // included from wx/platform.h before wxCHECK_VISUALC_VERSION() is defined
767 # if _MSC_VER >= 1310
768 // MSVC7.1+ comes with new enough Platform SDK, enable
769 // wxGraphicsContext support for it
770 # define wxUSE_GRAPHICS_CONTEXT 1
772 // MSVC 6 didn't include GDI+ headers so disable by default, enable it
773 // here if you use MSVC 6 with a newer SDK
774 # define wxUSE_GRAPHICS_CONTEXT 0
777 // Disable support for other Windows compilers, enable it if your compiler
778 // comes with new enough SDK or you installed the headers manually.
780 // Notice that this will be set by configure under non-Windows platforms
781 // anyhow so the value there is not important.
782 # define wxUSE_GRAPHICS_CONTEXT 0
785 // Enable wxGraphicsContext implementation using Cairo library.
787 // This is not needed under Windows and detected automatically by configure
788 // under other systems, however you may set this to 1 manually if you installed
789 // Cairo under Windows yourself and prefer to use it instead the native GDI+
794 // Recommended setting: 0
795 #define wxUSE_CAIRO 0
798 // ----------------------------------------------------------------------------
799 // Individual GUI controls
800 // ----------------------------------------------------------------------------
802 // You must set wxUSE_CONTROLS to 1 if you are using any controls at all
803 // (without it, wxControl class is not compiled)
807 // Recommended setting: 1 (don't change except for very special programs)
808 #define wxUSE_CONTROLS 1
810 // Support markup in control labels, i.e. provide wxControl::SetLabelMarkup().
811 // Currently markup is supported only by a few controls and only some ports but
812 // their number will increase with time.
816 // Recommended setting: 1 (may be set to 0 if you want to save on code size)
817 #define wxUSE_MARKUP 1
819 // wxPopupWindow class is a top level transient window. It is currently used
820 // to implement wxTipWindow
824 // Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
825 #define wxUSE_POPUPWIN 1
827 // wxTipWindow allows to implement the custom tooltips, it is used by the
828 // context help classes. Requires wxUSE_POPUPWIN.
832 // Recommended setting: 1 (may be set to 0)
833 #define wxUSE_TIPWINDOW 1
835 // Each of the settings below corresponds to one wxWidgets control. They are
836 // all switched on by default but may be disabled if you are sure that your
837 // program (including any standard dialogs it can show!) doesn't need them and
838 // if you desperately want to save some space. If you use any of these you must
839 // set wxUSE_CONTROLS as well.
843 // Recommended setting: 1
844 #define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl
845 #define wxUSE_BANNERWINDOW 1 // wxBannerWindow
846 #define wxUSE_BUTTON 1 // wxButton
847 #define wxUSE_BMPBUTTON 1 // wxBitmapButton
848 #define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
849 #define wxUSE_CHECKBOX 1 // wxCheckBox
850 #define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
851 #define wxUSE_CHOICE 1 // wxChoice
852 #define wxUSE_COLLPANE 1 // wxCollapsiblePane
853 #define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl
854 #define wxUSE_COMBOBOX 1 // wxComboBox
855 #define wxUSE_COMMANDLINKBUTTON 1 // wxCommandLinkButton
856 #define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
857 #define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
858 #define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl
859 #define wxUSE_EDITABLELISTBOX 1 // wxEditableListBox
860 #define wxUSE_FILECTRL 1 // wxFileCtrl
861 #define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl
862 #define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl
863 #define wxUSE_GAUGE 1 // wxGauge
864 #define wxUSE_HEADERCTRL 1 // wxHeaderCtrl
865 #define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl
866 #define wxUSE_LISTBOX 1 // wxListBox
867 #define wxUSE_LISTCTRL 1 // wxListCtrl
868 #define wxUSE_RADIOBOX 1 // wxRadioBox
869 #define wxUSE_RADIOBTN 1 // wxRadioButton
870 #define wxUSE_RICHMSGDLG 1 // wxRichMessageDialog
871 #define wxUSE_SCROLLBAR 1 // wxScrollBar
872 #define wxUSE_SEARCHCTRL 1 // wxSearchCtrl
873 #define wxUSE_SLIDER 1 // wxSlider
874 #define wxUSE_SPINBTN 1 // wxSpinButton
875 #define wxUSE_SPINCTRL 1 // wxSpinCtrl
876 #define wxUSE_STATBOX 1 // wxStaticBox
877 #define wxUSE_STATLINE 1 // wxStaticLine
878 #define wxUSE_STATTEXT 1 // wxStaticText
879 #define wxUSE_STATBMP 1 // wxStaticBitmap
880 #define wxUSE_TEXTCTRL 1 // wxTextCtrl
881 #define wxUSE_TIMEPICKCTRL 1 // wxTimePickerCtrl
882 #define wxUSE_TOGGLEBTN 1 // requires wxButton
883 #define wxUSE_TREECTRL 1 // wxTreeCtrl
884 #define wxUSE_TREELISTCTRL 1 // wxTreeListCtrl
886 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
887 // below either wxStatusBar95 or a generic wxStatusBar will be used.
891 // Recommended setting: 1
892 #define wxUSE_STATUSBAR 1
894 // Two status bar implementations are available under Win32: the generic one
895 // or the wrapper around native control. For native look and feel the native
896 // version should be used.
898 // Default is 1 for the platforms where native status bar is supported.
900 // Recommended setting: 1 (there is no advantage in using the generic one)
901 #define wxUSE_NATIVE_STATUSBAR 1
903 // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
904 // classes at all. Otherwise, use the native toolbar class unless
905 // wxUSE_TOOLBAR_NATIVE is 0.
907 // Default is 1 for all settings.
909 // Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE.
910 #define wxUSE_TOOLBAR 1
911 #define wxUSE_TOOLBAR_NATIVE 1
913 // wxNotebook is a control with several "tabs" located on one of its sides. It
914 // may be used to logically organise the data presented to the user instead of
915 // putting everything in one huge dialog. It replaces wxTabControl and related
916 // classes of wxWin 1.6x.
920 // Recommended setting: 1
921 #define wxUSE_NOTEBOOK 1
923 // wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
928 // Recommended setting: 1
929 #define wxUSE_LISTBOOK 1
931 // wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
936 // Recommended setting: 1
937 #define wxUSE_CHOICEBOOK 1
939 // wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
944 // Recommended setting: 1
945 #define wxUSE_TREEBOOK 1
947 // wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
952 // Recommended setting: 1
953 #define wxUSE_TOOLBOOK 1
955 // wxTaskBarIcon is a small notification icon shown in the system toolbar or
960 // Recommended setting: 1 (but can be set to 0 if you don't need it)
961 #define wxUSE_TASKBARICON 1
965 // Default is 1, set to 0 to cut down compilation time and binaries size if you
968 // Recommended setting: 1
972 // wxMiniFrame class: a frame with narrow title bar
976 // Recommended setting: 1 (it doesn't cost almost anything)
977 #define wxUSE_MINIFRAME 1
979 // wxComboCtrl and related classes: combobox with custom popup window and
980 // not necessarily a listbox.
984 // Recommended setting: 1 but can be safely set to 0 except for wxUniv where it
985 // it used by wxComboBox
986 #define wxUSE_COMBOCTRL 1
988 // wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox
993 // Recommended setting: 1 but can be safely set to 0, except where it is
994 // needed as a base class for generic wxBitmapComboBox.
995 #define wxUSE_ODCOMBOBOX 1
997 // wxBitmapComboBox is a combobox that can have images in front of text items.
1001 // Recommended setting: 1 but can be safely set to 0
1002 #define wxUSE_BITMAPCOMBOBOX 1
1004 // wxRearrangeCtrl is a wxCheckListBox with two buttons allowing to move items
1005 // up and down in it. It is also used as part of wxRearrangeDialog.
1009 // Recommended setting: 1 but can be safely set to 0 (currently used only by
1011 #define wxUSE_REARRANGECTRL 1
1013 // ----------------------------------------------------------------------------
1014 // Miscellaneous GUI stuff
1015 // ----------------------------------------------------------------------------
1017 // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
1018 #define wxUSE_ACCEL 1
1020 // Use the standard art provider. The icons returned by this provider are
1021 // embedded into the library as XPMs so disabling it reduces the library size
1022 // somewhat but this should only be done if you use your own custom art
1023 // provider returning the icons or never use any icons not provided by the
1024 // native art provider (which might not be implemented at all for some
1025 // platforms) or by the Tango icons provider (if it's not itself disabled
1030 // Recommended setting: 1 unless you use your own custom art provider.
1031 #define wxUSE_ARTPROVIDER_STD 1
1033 // Use art provider providing Tango icons: this art provider has higher quality
1034 // icons than the default ones using smaller size XPM icons without
1035 // transparency but the embedded PNG icons add to the library size.
1037 // Default is 1 under non-GTK ports. Under wxGTK the native art provider using
1038 // the GTK+ stock icons replaces it so it is normally not necessary.
1040 // Recommended setting: 1 but can be turned off to reduce the library size.
1041 #define wxUSE_ARTPROVIDER_TANGO 1
1043 // Hotkey support (currently Windows only)
1044 #define wxUSE_HOTKEY 1
1046 // Use wxCaret: a class implementing a "cursor" in a text control (called caret
1051 // Recommended setting: 1 (can be safely set to 0, not used by the library)
1052 #define wxUSE_CARET 1
1054 // Use wxDisplay class: it allows enumerating all displays on a system and
1055 // their geometries as well as finding the display on which the given point or
1060 // Recommended setting: 1 if you need it, can be safely set to 0 otherwise
1061 #define wxUSE_DISPLAY 1
1063 // Miscellaneous geometry code: needed for Canvas library
1064 #define wxUSE_GEOMETRY 1
1066 // Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
1071 // Recommended setting: 1 (set it to 0 if you don't use any of the controls
1072 // enumerated above, then this class is mostly useless too)
1073 #define wxUSE_IMAGLIST 1
1075 // Use wxInfoBar class.
1079 // Recommended setting: 1 (but can be disabled without problems as nothing
1081 #define wxUSE_INFOBAR 1
1083 // Use wxMenu, wxMenuBar, wxMenuItem.
1087 // Recommended setting: 1 (can't be disabled under MSW)
1088 #define wxUSE_MENUS 1
1090 // Use wxNotificationMessage.
1092 // wxNotificationMessage allows to show non-intrusive messages to the user
1093 // using balloons, banners, popups or whatever is the appropriate method for
1094 // the current platform.
1098 // Recommended setting: 1
1099 #define wxUSE_NOTIFICATION_MESSAGE 1
1101 // wxPreferencesEditor provides a common API for different ways of presenting
1102 // the standard "Preferences" or "Properties" dialog under different platforms
1103 // (e.g. some use modal dialogs, some use modeless ones; some apply the changes
1104 // immediately while others require an explicit "Apply" button).
1108 // Recommended setting: 1 (but can be safely disabled if you don't use it)
1109 #define wxUSE_PREFERENCES_EDITOR 1
1111 // wxRichToolTip is a customizable tooltip class which has more functionality
1112 // than the stock (but native, unlike this class) wxToolTip.
1116 // Recommended setting: 1 (but can be safely set to 0 if you don't need it)
1117 #define wxUSE_RICHTOOLTIP 1
1119 // Use wxSashWindow class.
1123 // Recommended setting: 1
1124 #define wxUSE_SASH 1
1126 // Use wxSplitterWindow class.
1130 // Recommended setting: 1
1131 #define wxUSE_SPLITTER 1
1133 // Use wxToolTip and wxWindow::Set/GetToolTip() methods.
1137 // Recommended setting: 1
1138 #define wxUSE_TOOLTIPS 1
1140 // wxValidator class and related methods
1141 #define wxUSE_VALIDATORS 1
1143 // Use reference counted ID management: this means that wxWidgets will track
1144 // the automatically allocated ids (those used when you use wxID_ANY when
1145 // creating a window, menu or toolbar item &c) instead of just supposing that
1146 // the program never runs out of them. This is mostly useful only under wxMSW
1147 // where the total ids range is limited to SHRT_MIN..SHRT_MAX and where
1148 // long-running programs can run into problems with ids reuse without this. On
1149 // the other platforms, where the ids have the full int range, this shouldn't
1152 #define wxUSE_AUTOID_MANAGEMENT 1
1154 #define wxUSE_AUTOID_MANAGEMENT 0
1157 // ----------------------------------------------------------------------------
1159 // ----------------------------------------------------------------------------
1161 // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
1162 // file selector, printer dialog). Switching this off also switches off the
1163 // printing architecture and interactive wxPrinterDC.
1167 // Recommended setting: 1 (unless it really doesn't work)
1168 #define wxUSE_COMMON_DIALOGS 1
1170 // wxBusyInfo displays window with message when app is busy. Works in same way
1172 #define wxUSE_BUSYINFO 1
1174 // Use single/multiple choice dialogs.
1178 // Recommended setting: 1 (used in the library itself)
1179 #define wxUSE_CHOICEDLG 1
1181 // Use colour picker dialog
1185 // Recommended setting: 1
1186 #define wxUSE_COLOURDLG 1
1188 // wxDirDlg class for getting a directory name from user
1189 #define wxUSE_DIRDLG 1
1191 // TODO: setting to choose the generic or native one
1193 // Use file open/save dialogs.
1197 // Recommended setting: 1 (used in many places in the library itself)
1198 #define wxUSE_FILEDLG 1
1200 // Use find/replace dialogs.
1204 // Recommended setting: 1 (but may be safely set to 0)
1205 #define wxUSE_FINDREPLDLG 1
1207 // Use font picker dialog
1211 // Recommended setting: 1 (used in the library itself)
1212 #define wxUSE_FONTDLG 1
1214 // Use wxMessageDialog and wxMessageBox.
1218 // Recommended setting: 1 (used in the library itself)
1219 #define wxUSE_MSGDLG 1
1221 // progress dialog class for lengthy operations
1222 #define wxUSE_PROGRESSDLG 1
1224 // support for startup tips (wxShowTip &c)
1225 #define wxUSE_STARTUP_TIPS 1
1227 // text entry dialog and wxGetTextFromUser function
1228 #define wxUSE_TEXTDLG 1
1230 // number entry dialog
1231 #define wxUSE_NUMBERDLG 1
1233 // splash screen class
1234 #define wxUSE_SPLASH 1
1237 #define wxUSE_WIZARDDLG 1
1239 // Compile in wxAboutBox() function showing the standard "About" dialog.
1243 // Recommended setting: 1 but can be set to 0 to save some space if you don't
1244 // use this function
1245 #define wxUSE_ABOUTDLG 1
1247 // wxFileHistory class
1251 // Recommended setting: 1
1252 #define wxUSE_FILE_HISTORY 1
1254 // ----------------------------------------------------------------------------
1255 // Metafiles support
1256 // ----------------------------------------------------------------------------
1258 // Windows supports the graphics format known as metafile which is, though not
1259 // portable, is widely used under Windows and so is supported by wxWin (under
1260 // Windows only, of course). Win16 (Win3.1) used the so-called "Window
1261 // MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
1262 // Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
1263 // default, WMFs will be used under Win16 and EMFs under Win32. This may be
1264 // changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
1265 // wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
1266 // in any metafile related classes at all.
1268 // Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
1270 // Recommended setting: default or 0 for everything for portable programs.
1271 #define wxUSE_METAFILE 1
1272 #define wxUSE_ENH_METAFILE 1
1273 #define wxUSE_WIN_METAFILES_ALWAYS 0
1275 // ----------------------------------------------------------------------------
1276 // Big GUI components
1277 // ----------------------------------------------------------------------------
1279 // Set to 0 to disable MDI support.
1281 // Requires wxUSE_NOTEBOOK under platforms other than MSW.
1285 // Recommended setting: 1, can be safely set to 0.
1288 // Set to 0 to disable document/view architecture
1289 #define wxUSE_DOC_VIEW_ARCHITECTURE 1
1291 // Set to 0 to disable MDI document/view architecture
1293 // Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
1294 #define wxUSE_MDI_ARCHITECTURE 1
1296 // Set to 0 to disable print/preview architecture code
1297 #define wxUSE_PRINTING_ARCHITECTURE 1
1299 // wxHTML sublibrary allows to display HTML in wxWindow programs and much,
1304 // Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
1306 #define wxUSE_HTML 1
1308 // Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
1309 // headers and libraries to be able to compile the library with wxUSE_GLCANVAS
1310 // set to 1 and, under Windows, also to add opengl32.lib and glu32.lib to the
1311 // list of libraries used to link your application (although this is done
1312 // implicitly for Microsoft Visual C++ users).
1314 // Default is 1 unless the compiler is known to ship without the necessary
1315 // headers (Digital Mars) or the platform doesn't support OpenGL (Windows CE).
1317 // Recommended setting: 1 if you intend to use OpenGL, can be safely set to 0
1319 #define wxUSE_GLCANVAS 1
1321 // wxRichTextCtrl allows editing of styled text.
1325 // Recommended setting: 1, set to 0 if you want compile a
1327 #define wxUSE_RICHTEXT 1
1329 // ----------------------------------------------------------------------------
1331 // ----------------------------------------------------------------------------
1333 // Use wxClipboard class for clipboard copy/paste.
1337 // Recommended setting: 1
1338 #define wxUSE_CLIPBOARD 1
1340 // Use wxDataObject and related classes. Needed for clipboard and OLE drag and
1345 // Recommended setting: 1
1346 #define wxUSE_DATAOBJ 1
1348 // Use wxDropTarget and wxDropSource classes for drag and drop (this is
1349 // different from "built in" drag and drop in wxTreeCtrl which is always
1350 // available). Requires wxUSE_DATAOBJ.
1354 // Recommended setting: 1
1355 #define wxUSE_DRAG_AND_DROP 1
1357 // Use wxAccessible for enhanced and customisable accessibility.
1358 // Depends on wxUSE_OLE.
1362 // Recommended setting (at present): 0
1363 #define wxUSE_ACCESSIBILITY 0
1365 // ----------------------------------------------------------------------------
1366 // miscellaneous settings
1367 // ----------------------------------------------------------------------------
1369 // wxSingleInstanceChecker class allows to verify at startup if another program
1370 // instance is running.
1374 // Recommended setting: 1 (the class is tiny, disabling it won't save much
1376 #define wxUSE_SNGLINST_CHECKER 1
1378 #define wxUSE_DRAGIMAGE 1
1381 // 0 for no interprocess comms
1382 #define wxUSE_HELP 1
1383 // 0 for no help facility
1385 // Should we use MS HTML help for wxHelpController? If disabled, neither
1386 // wxCHMHelpController nor wxBestHelpController are available.
1388 // Default is 1 under MSW, 0 is always used for the other platforms.
1390 // Recommended setting: 1, only set to 0 if you have trouble compiling
1391 // wxCHMHelpController (could be a problem with really ancient compilers)
1392 #define wxUSE_MS_HTML_HELP 1
1395 // Use wxHTML-based help controller?
1396 #define wxUSE_WXHTML_HELP 1
1398 #define wxUSE_CONSTRAINTS 1
1399 // 0 for no window layout constraint system
1401 #define wxUSE_SPLINES 1
1404 #define wxUSE_MOUSEWHEEL 1
1405 // Include mouse wheel support
1407 // Compile wxUIActionSimulator class?
1408 #define wxUSE_UIACTIONSIMULATOR 1
1410 // ----------------------------------------------------------------------------
1411 // wxDC classes for various output formats
1412 // ----------------------------------------------------------------------------
1414 // Set to 1 for PostScript device context.
1415 #define wxUSE_POSTSCRIPT 0
1417 // Set to 1 to use font metric files in GetTextExtent
1418 #define wxUSE_AFM_FOR_POSTSCRIPT 1
1420 // Set to 1 to compile in support for wxSVGFileDC, a wxDC subclass which allows
1421 // to create files in SVG (Scalable Vector Graphics) format.
1424 // Should wxDC provide SetTransformMatrix() and related methods?
1426 // Default is 1 but can be set to 0 if this functionality is not used. Notice
1427 // that currently only wxMSW supports this so setting this to 0 doesn't change
1428 // much for non-MSW platforms (although it will still save a few bytes
1431 // Recommended setting: 1.
1432 #define wxUSE_DC_TRANSFORM_MATRIX 1
1434 // ----------------------------------------------------------------------------
1435 // image format support
1436 // ----------------------------------------------------------------------------
1438 // wxImage supports many different image formats which can be configured at
1439 // compile-time. BMP is always supported, others are optional and can be safely
1440 // disabled if you don't plan to use images in such format sometimes saving
1441 // substantial amount of code in the final library.
1443 // Some formats require an extra library which is included in wxWin sources
1444 // which is mentioned if it is the case.
1446 // Set to 1 for wxImage support (recommended).
1447 #define wxUSE_IMAGE 1
1449 // Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
1450 #define wxUSE_LIBPNG 1
1452 // Set to 1 for JPEG format support (requires libjpeg)
1453 #define wxUSE_LIBJPEG 1
1455 // Set to 1 for TIFF format support (requires libtiff)
1456 #define wxUSE_LIBTIFF 1
1458 // Set to 1 for TGA format support (loading only)
1461 // Set to 1 for GIF format support
1464 // Set to 1 for PNM format support
1467 // Set to 1 for PCX format support
1470 // Set to 1 for IFF format support (Amiga format)
1473 // Set to 1 for XPM format support
1476 // Set to 1 for MS Icons and Cursors format support
1477 #define wxUSE_ICO_CUR 1
1479 // Set to 1 to compile in wxPalette class
1480 #define wxUSE_PALETTE 1
1482 // ----------------------------------------------------------------------------
1483 // wxUniversal-only options
1484 // ----------------------------------------------------------------------------
1486 // Set to 1 to enable compilation of all themes, this is the default
1487 #define wxUSE_ALL_THEMES 1
1489 // Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES
1490 // is unset, if it is set these options are not used; notice that metal theme
1492 #define wxUSE_THEME_GTK 0
1493 #define wxUSE_THEME_METAL 0
1494 #define wxUSE_THEME_MONO 0
1495 #define wxUSE_THEME_WIN32 0
1498 /* --- end common options --- */
1500 // ----------------------------------------------------------------------------
1501 // Unix-specific options settings
1502 // ----------------------------------------------------------------------------
1504 // use wxSelectDispatcher class
1505 #define wxUSE_SELECT_DISPATCHER 1
1507 // use wxEpollDispatcher class (Linux only)
1508 #define wxUSE_EPOLL_DISPATCHER 0
1511 Use GStreamer for Unix.
1513 Default is 0 as this requires a lot of dependencies which might not be
1516 Recommended setting: 1 (wxMediaCtrl won't work by default without it).
1518 #define wxUSE_GSTREAMER 0
1520 // ----------------------------------------------------------------------------
1521 // Mac-specific settings
1522 // ----------------------------------------------------------------------------
1524 #undef wxUSE_GRAPHICS_CONTEXT
1525 #define wxUSE_GRAPHICS_CONTEXT 1
1528 // things not implemented under Mac
1530 #undef wxUSE_STACKWALKER
1531 #define wxUSE_STACKWALKER 0
1533 // wxWebKit is a wrapper for Apple's WebKit framework, use it if you want to
1534 // embed the Safari browser control
1535 // 0 by default because of Jaguar compatibility problems
1536 #define wxUSE_WEBKIT 1
1539 // Set to 0 for no libmspack
1540 #define wxUSE_LIBMSPACK 0
1542 // native toolbar does support embedding controls, but not complex panels, please test
1543 #define wxOSX_USE_NATIVE_TOOLBAR 1
1545 // make sure we have the proper dispatcher for the console event loop
1546 #define wxUSE_SELECT_DISPATCHER 1
1547 #define wxUSE_EPOLL_DISPATCHER 0