wxPython/distrib/wxPythonFull.spec.in

   1 #----------------------------------------------------------------------
   2 # Name:        wxPython.spec
   3 # Purpose:     RPM Build and packaging instructions
   4 #
   5 # Author:      Robin Dunn
   6 #
   7 # RCS-ID:      $Id$
   8 # Copyright:   (c) 2004 by Total Control Software
   9 # Licence:     wxWindows license
  10 #----------------------------------------------------------------------
  11
  12
  13 # The following values can be set on the rpmbuild command line with
  14 # --define 'name VALUE'  If no value is set on the command line then
  15 # the default value set here will be used instead.
  16
  17
  18 # Which version of Python to build with.  Used to assemble python
  19 # binary name so use '2.3', '2.4', etc.
  20 %if %{?pyver:0}%{!?pyver:1}
  21 %define pyver 2.4
  22 %endif
  23
  24
  25 # Which wxWidgets port to build and use.  Current acceptable values
  26 # are 'gtk' and 'gtk2'.
  27 %if %{?port:0}%{!?port:1}
  28 %define port gtk2
  29 %endif
  30
  31
  32 # Build in unicode mode?  Can only be used if port is gtk2, acceptable
  33 # values are '0' and '1'
  34 %if %{?unicode:0}%{!?unicode:1}
  35 %define unicode 1
  36 %endif
  37
  38
  39 # Should the builtin image and etc. libs be used, or system libs?
  40 # Distro specific RPMs should probably set this to 0, generic ones
  41 # should use 1.
  42 # NOTE: I'm trying 0 for this next release to see if I can get rid of
  43 # this...
  44 %if %{?builtin_libs:0}%{!?builtin_libs:1}
  45 %define builtin_libs 0
  46 %endif
  47
  48
  49 # Should --enable-debug_flag be used in release builds?  Using it
  50 # defines __WXDEBUG__ and gives us runtime diagnostics that are turned
  51 # into Python exceptions.  (So turning it on is a very helpful thing
  52 # IMO and is recommended.)  The code is still compiled with
  53 # optimization flags and and without debug info and such when this
  54 # option is used, it simply turns on some extra code.
  55 %if %{?debug_flag:0}%{!?debug_flag:1}
  56 %define debug_flag 1
  57 %endif
  58
  59
  60 # Used to set the Release tag below.  I normally use it to define what
  61 # distro the RPM was built on and also include the version of Python
  62 # it was built with.
  63 %if %{?release:0}%{!?release:1}
  64 %define release 1_py%{pyver}
  65 %endif
  66
  67
  68 # This one is used to control whether the full 4 components of the
  69 # verseion number are used in the site-packages subdirectory name.  By
  70 # default only 2 or 3 components (depending on stable/unstable status)
  71 # are used.
  72 %if %{?fullver:0}%{!?fullver:1}
  73 %define fullver 0
  74 %endif
  75
  76
  77 # Whether to add --enable-mediactrl to the wxWidgets configure.  For
  78 # some older versions of gstreamer-0.8 it currently incorerctly allows
  79 # its use eventhough there is a compatibility problem that causes a
  80 # failed compile.
  81 %if %{?mediactrl:0}%{!?mediactrl:1}
  82 %define mediactrl 1
  83 %endif
  84
  85
  86 #----------------------------------------------------------------------
  87 # Other variables used below
  88
  89 %define pref       %{_prefix}
  90 %define python     /usr/bin/python%{pyver}
  91 %define tarname    @TARNAME@
  92 %define version    @VERSION@
  93 %define ver2       @VER2@
  94
  95 %define chartype   %(if [ "%{unicode}" = "1" ]; then echo unicode; else echo ansi; fi)
  96 %define gtktype    %(if [ "%{port}" = "gtk2" ]; then echo 2; fi)
  97 %define using_gtk1 %(if [ "%{port}" = "gtk" ]; then echo 1; else echo 0; fi)
  98
  99 %define wxprefbase %{pref}/lib/wxPython
 100 %define wxpref     %{wxprefbase}-%{version}-%{port}-%{chartype}
 101 %define pkgname    wxPython
 102
 103 # turn off the generation of debuginfo rpm  (RH9) ??
 104 %define debug_package %{nil}
 105
 106
 107 #----------------------------------------------------------------------
 108 # Package definition
 109 #----------------------------------------------------------------------
 110 Name:      %{pkgname}%{ver2}
 111 Summary:   Cross platform GUI toolkit for Python
 112 Version:   %{version}
 113 Release:   %{release}
 114 Source0:   %{tarname}-%{version}.tar.bz2
 115 License:   wx Library Licence, Version 3
 116 URL:       http://wxPython.org/
 117 Packager:  Robin Dunn <robin@alldunn.com>
 118 Group:     Development/Python
 119 BuildRoot: %{_tmppath}/%{pkgname}-buildroot
 120 Prefix:    %{pref}
 121
 122 %description
 123 Cross platform GUI toolkit for Python
 124
 125
 126
 127
 128 %package -n %{pkgname}%{ver2}-%{port}-%{chartype}
 129 Summary:   Cross platform GUI toolkit for Python
 130 Group:     Development/Python
 131 Requires:  %{pkgname}-common
 132 Obsoletes: wxPythonGTK%{gtktype}-py%{pyver}, wxPythonGTK%{gtktype}
 133 Provides:  wxPython
 134
 135
 136 %description -n %{pkgname}%{ver2}-%{port}-%{chartype}
 137 wxPython is a GUI toolkit for the Python programming language. It
 138 allows Python programmers to create programs with a robust, highly
 139 functional graphical user interface, simply and easily. It is
 140 implemented as a Python extension module (native code) that wraps the
 141 popular wxWidgets cross platform GUI library, which is written in C++.
 142
 143 wxPython is a cross-platform toolkit. The same program will usually
 144 run on multiple platforms without modification. Currently supported
 145 platforms are 32-bit Microsoft Windows, most Unix or unix-like
 146 systems, and Macintosh OS X.
 147
 148 This package contains the wxPython runtime files built for the
 149 wxWidgets %{port} port with %{chartype} character type.
 150
 151
 152
 153
 154
 155 %package -n %{pkgname}-common-%{port}-%{chartype}
 156 Summary: Common files for needed by all wxPython runtimes
 157 Group: Development/Python
 158 Provides: %{pkgname}-common
 159
 160 # They obsolete each other so any of them can be installed over another
 161 # without conflicts
 162 Obsoletes: %{pkgname}-common-gtk-ansi
 163 Obsoletes: %{pkgname}-common-gtk2-ansi
 164 Obsoletes: %{pkgname}-common-gtk2-unicode
 165
 166 %description -n %{pkgname}-common-%{port}-%{chartype}
 167 This package contains the common files needed by any version of the
 168 wxPython runtime.  This pacakge also installs a wx.pth file which will
 169 determine which of the installed runtimes is the default version of
 170 wxPython that is imported automatically with a bare "import wx".
 171
 172
 173
 174
 175
 176 %package -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 177 Summary: wxPython development files
 178 Group: Development/Libraries
 179 Requires: %{pkgname}%{ver2}-%{port}-%{chartype} = %{version}
 180
 181 %description -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 182 This packages contains the headers and etc. for building apps or
 183 Python extension modules that use the same wxWidgets shared libraries
 184 that wxPython uses.
 185
 186
 187
 188 #----------------------------------------------------------------------
 189 %prep
 190 %setup -q -n %{tarname}-%{version}
 191
 192
 193 #----------------------------------------------------------------------
 194 %build
 195
 196 WXDIR=`pwd`
 197
 198 # Configure and build wxWidgets
 199 mkdir bld
 200 cd bld
 201 ../configure \
 202 %if %{using_gtk1}
 203         --with-gtk=1 \
 204 %else
 205         --with-gtk=2 \
 206 %endif
 207         --prefix=%{wxpref} \
 208         --disable-monolithic \
 209         --disable-rpath \
 210         --with-opengl \
 211         --with-gnomeprint \
 212         --enable-geometry \
 213         --enable-graphics_ctx \
 214         --enable-optimise \
 215         --enable-sound  --with-sdl \
 216 %if %{mediactrl}
 217         --enable-mediactrl \
 218 %endif
 219         --enable-display \
 220 %if %{unicode}
 221         --enable-unicode \
 222 %else
 223         --disable-unicode \
 224 %endif
 225 %if %{debug_flag}
 226         --enable-debug_flag \
 227 %endif
 228         --disable-debugreport \
 229 %if %{builtin_libs}
 230         --with-libjpeg=builtin \
 231         --with-libpng=builtin \
 232         --with-libtiff=builtin \
 233         --with-zlib=builtin \
 234 %endif
 235
 236
 237 make
 238 make -C contrib/src/gizmos
 239 make -C contrib/src/stc
 240
 241
 242
 243 # Build wxPython
 244 cd $WXDIR/wxPython
 245 %{python} setup.py \
 246         WXPORT=%{port} \
 247         UNICODE=%{unicode} \
 248         EP_ADD_OPTS=1 \
 249         EP_FULL_VER=%{fullver} \
 250         NO_SCRIPTS=1 \
 251         WX_CONFIG="$WXDIR/bld/wx-config --no_rpath" \
 252         build_ext --rpath=%{wxpref}/lib \
 253         build
 254
 255
 256
 257 #----------------------------------------------------------------------
 258 %install
 259
 260 WXDIR=`pwd`
 261
 262 # Install wxGTK and contribs
 263 cd bld
 264 make prefix=$RPM_BUILD_ROOT%{wxpref} install
 265 make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install
 266 make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install
 267
 268
 269
 270 # Install wxPython for wxGTK
 271 cd $WXDIR/wxPython
 272 %{python} setup.py \
 273         WXPORT=%{port} \
 274         UNICODE=%{unicode} \
 275         EP_ADD_OPTS=1 \
 276         EP_FULL_VER=%{fullver} \
 277         NO_SCRIPTS=1 \
 278         WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref} --no_rpath" \
 279         build_ext --rpath=%{wxpref}/lib \
 280         install \
 281         --root=$RPM_BUILD_ROOT
 282
 283
 284 # remove the wx-config symlink, we'll redo it when installing the -devel package
 285 rm $RPM_BUILD_ROOT%{wxpref}/bin/wx-config
 286
 287 # make sure that debug info is stripped
 288 strip $RPM_BUILD_ROOT%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/wx/*.so
 289
 290
 291 # Since I want this RPM to be as generic as possible I won't let
 292 # distutils copy the scripts (NO_SCRIPTS=1 above) since it will mangle
 293 # the #! line to use the real python pathname.  Since some distros
 294 # install python 2.2 as python2 and others as python I can't let
 295 # distutils do that otherwise the dependencies will be fouled up.
 296 # Copy them manually instead, leaving the #!/usr/bin/env line intact.
 297 cd $WXDIR/wxPython
 298 mkdir -p $RPM_BUILD_ROOT%{pref}/bin
 299 for s in \
 300         helpviewer \
 301         img2png \
 302         img2py \
 303         img2xpm \
 304         pyalacarte \
 305         pyalamode \
 306         pycrust \
 307         pywrap \
 308         pyshell \
 309         pywxrc \
 310         xrced; do
 311     cp scripts/$s $RPM_BUILD_ROOT%{pref}/bin
 312 done
 313
 314
 315
 316 # install KDE & GNOME menu items
 317 mkdir -p $RPM_BUILD_ROOT%{_datadir}/applnk/Development
 318 mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications
 319 for d in distrib/*.desktop; do
 320         install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applnk/Development
 321         install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applications
 322 done
 323
 324 # install KDE icons
 325 mkdir -p $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/{16x16,32x32}/apps
 326 mkdir -p $RPM_BUILD_ROOT%{_datadir}/pixmaps
 327 install -m 644 wx/py/PyCrust_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/PyCrust.png
 328 install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/PyCrust.png
 329 install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/PyCrust.png
 330 install -m 644 wx/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/XRCed.png
 331 install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/XRCed.png
 332 install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/XRCed.png
 333
 334 # install Mandrake menu items
 335 mkdir -p $RPM_BUILD_ROOT%{_libdir}/menu
 336 cat > $RPM_BUILD_ROOT%{_libdir}/menu/%{pkgname} <<EOF
 337 ?package(%{pkgname}): \\
 338         command="%{_bindir}/pyshell" \\
 339         needs="X11" \\
 340         icon="PyCrust.png" \\
 341         section="Applications/Development/Tools" \\
 342         title="PyShell" \\
 343         longtitle="GUI Python Shell"
 344 ?package(%{pkgname}): \\
 345         command="%{_bindir}/pycrust" \\
 346         needs="X11" \\
 347         icon="PyCrust.png" \\
 348         section="Applications/Development/Tools" \\
 349         title="PyCrust" \\
 350         longtitle="GUI Python Shell with Filling"
 351 ?package(%{pkgname}): \\
 352         command="%{_bindir}/pyalamode" \\
 353         needs="X11" \\
 354         icon="PyCrust.png" \\
 355         section="Applications/Development/Tools" \\
 356         title="PyAlaMode" \\
 357         longtitle="GUI Python Shell with Filling and editor windows"
 358 ?package(%{pkgname}): \\
 359         command="%{_bindir}/xrced" \\
 360         needs="X11" \\
 361         icon="XRCed.png" \\
 362         section="Applications/Development/Tools" \\
 363         title="XRCed" \\
 364         longtitle="wxPython XRC resource editor"
 365 EOF
 366
 367
 368 #----------------------------------------------------------------------
 369
 370 %post -n %{pkgname}%{ver2}-%{port}-%{chartype}
 371 if [ ! -e %{wxprefbase} ]; then
 372         ln -s %{pkgname}-%{version}-%{port}-%{chartype}  %{wxprefbase}
 373 fi
 374
 375 %preun -n %{pkgname}%{ver2}-%{port}-%{chartype}
 376 if [ -L %{wxprefbase} ]; then
 377         if [ `readlink %{wxprefbase}` == %{pkgname}-%{version}-%{port}-%{chartype} ]; then
 378                 rm -f %{wxprefbase}
 379         fi
 380 fi
 381
 382
 383
 384
 385 %post -n %{pkgname}-common-%{port}-%{chartype}
 386 # This is done on Mandrake to update its menus:
 387 if [ -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
 388
 389 %postun -n %{pkgname}-common-%{port}-%{chartype}
 390 # This is done on Mandrake to update its menus:
 391 if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
 392
 393
 394
 395 %post -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 396 cd %{wxpref}/bin
 397 ln -s ../lib/wx/config/%{port}-%{chartype}*  wx-config
 398
 399 %preun -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 400 rm %{wxpref}/bin/wx-config
 401
 402
 403 #----------------------------------------------------------------------
 404 %clean
 405 [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
 406
 407
 408 #----------------------------------------------------------------------
 409
 410 %files -n %{pkgname}%{ver2}-%{port}-%{chartype}
 411 %defattr(-,root,root)
 412 %doc docs/preamble.txt docs/licence.txt docs/lgpl.txt docs/readme.txt docs/changes.txt
 413 %doc wxPython/docs/*
 414 %dir %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}
 415 %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/*
 416 %dir %{pref}/lib*/python%{pyver}/site-packages/wxaddons
 417 %{pref}/lib*/python%{pyver}/site-packages/wxaddons/*
 418 %dir %{wxpref}
 419 %dir %{wxpref}/lib
 420 %{wxpref}/lib/libwx_*
 421 %dir %{wxpref}/bin
 422 %{wxpref}/bin/wxrc*
 423 %{wxpref}/share
 424
 425
 426
 427 %files -n %{pkgname}-common-%{port}-%{chartype}
 428 %defattr(-,root,root)
 429 %{pref}/lib*/python%{pyver}/site-packages/wxversion.*
 430 %{pref}/lib*/python%{pyver}/site-packages/wx.pth
 431 %{_bindir}/*
 432 %{_datadir}/applnk/Development/*
 433 %{_datadir}/applications/*
 434 %{_datadir}/icons/hicolor/*/apps/*
 435 %{_datadir}/pixmaps/*
 436 %{_libdir}/menu/*
 437
 438
 439
 440
 441
 442 %files -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 443 %defattr(-,root,root)
 444 %{wxpref}/include
 445 %{wxpref}/lib/wx
 446 %dir %{wxpref}/bin
 447
 448
 449 #----------------------------------------------------------------------
 450 # end of file