GSocket:

[wxWidgets.git] / include / wx / mac / setup.h

/////////////////////////////////////////////////////////////////////////////
// Name:        setup.h
// Purpose:     Configuration for the library
// Author:      AUTHOR
// Modified by:
// Created:     ??/??/98
// RCS-ID:      $Id$
// Copyright:   (c) AUTHOR
// Licence:     wxWindows licence
/////////////////////////////////////////////////////////////////////////////

#ifndef _WX_SETUP_H_
#define _WX_SETUP_H_

// ----------------------------------------------------------------------------
// global settings
// ----------------------------------------------------------------------------

// define this to 0 when building wxBase library
#define wxUSE_GUI            1
 
// ----------------------------------------------------------------------------
// compatibility settings
// ----------------------------------------------------------------------------

// This setting determines the compatibility with 1.68 API:
// Level 0: no backward compatibility, all new features
// Level 1: some extra methods are defined for compatibility.
//
// Default is 0.
//
// Recommended setting: 0 (in fact the compatibility code is now very minimal
// so there is little advantage to setting it to 1.
#define WXWIN_COMPATIBILITY  0

#define WORDS_BIGENDIAN 1

// ----------------------------------------------------------------------------
// non GUI features selection
// ----------------------------------------------------------------------------

// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
// integer which is implemented in terms of native 64 bit integers if any or
// uses emulation otherwise.
//
// This class is required by wxDateTime and so you should enable it if you want
// to use wxDateTime. For most modern platforms, it will use the native 64 bit
// integers in which case (almost) all of its functions are inline and it
// almost does not take any space, so there should be no reason to switch it
// off.
//
// Recommended setting: 1
#define wxUSE_LONGLONG      1


// Set wxUSE_TIMEDATE to 1 to compile the wxDateTime and related classes which
// allow to manipulate dates, times and time intervals. wxDateTime replaces the
// old wxTime and wxDate classes which are still provided for backwards
// compatibility (and implemented in terms of wxDateTime).
//
// Note that this class is relatively new and is still officially in alpha
// stage because some features are not yet (fully) implemented. It is already
// quite useful though and should only be disabled if you are aiming at
// absolutely minimal version of the library.
//
// Requires: wxUSE_LONGLONG
//
// Recommended setting: 1
#define wxUSE_TIMEDATE      1

// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
// which allow the application to store its settings in the persistent
// storage. Setting this to 1 will also enable on-demand creation of the
// global config object in wxApp.
//
// See also wxUSE_CONFIG_NATIVE below.
//
// Recommended setting: 1
#define wxUSE_CONFIG           1

// ----------------------------------------------------------------------------
// Optional controls
// ----------------------------------------------------------------------------

// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
// classes at all. Otherwise, use the native toolbar class unless
// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
// supports some features which might not be supported by the native wxToolBar
// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1.
//
// Default is 1 for all settings.
//
// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for
// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility).
#define wxUSE_TOOLBAR 1
#define wxUSE_TOOLBAR_NATIVE 1
#define wxUSE_TOOLBAR_SIMPLE 0

// wxNotebook is a control with several "tabs" located on one of its sides. It
// may be used ot logically organise the data presented to the user instead of
// putting everything in one huge dialog. It replaces wxTabControl and related
// classes of wxWin 1.6x.
//
// Default is 1.
//
// Recommended setting: 1
#define wxUSE_NOTEBOOK 1


// The corresponding controls will be compiled in if wxUSE_<CONTROL> is set to
// 1 and not compiled into the library otherwise.
//
// Default is 1 for everything.
//
// Recommended setting: 1 (library might fail to compile for some combinations
// of disabled controls) 
#define wxUSE_COMBOBOX     1
#define wxUSE_CHOICE       1
#define wxUSE_RADIOBTN     1
#define wxUSE_RADIOBOX     1
#define wxUSE_SCROLLBAR    1
#define wxUSE_CHECKBOX     1
#define wxUSE_LISTBOX      1
#define wxUSE_SPINBTN      1
#define wxUSE_SPINCTRL     1
#define wxUSE_STATLINE     1
#define wxUSE_CHECKLISTBOX 1
#define wxUSE_CHOICE       1
#define wxUSE_CARET        1
#define wxUSE_SLIDER       1

// ----------------------------------------------------------------------------
// Postscript support settings
// ----------------------------------------------------------------------------


#define wxUSE_POSTSCRIPT  0
                                // 0 for no PostScript device context
#define wxUSE_AFM_FOR_POSTSCRIPT 0
                                // 1 to use font metric files in GetTextExtent
#define wxUSE_METAFILE    1
                                // 0 for no Metafile and metafile device context
#define wxUSE_IPC         0
                                // 0 for no interprocess comms
#define wxUSE_HELP        0
                                // 0 for no help facility
#define wxUSE_RESOURCES   1
                                // 0 for no wxGetResource/wxWriteResource
#define wxUSE_CONSTRAINTS       1
                                // Use constraints mechanism
#define wxUSE_TIMEDATE    1
                                // 0 for no wxTime/wxDate classes

#define wxUSE_CLIPBOARD   1
                                // 0 for no clipboard functions

#define wxUSE_SPLINES     1
                                    // 0 for no splines

#define wxUSE_DRAG_AND_DROP 0
                                // 0 for no drag and drop

#define wxUSE_TOOLBAR       1
                                    // Define 1 to use toolbar classes
#define wxUSE_BUTTONBAR     1
                                    // Define 1 to use buttonbar classes (enhanced toolbar
                                    // for MS Windows)
#define wxUSE_GAUGE         1
                                    // Define 1 to use Microsoft's gauge (Windows)
                                    // or Bull's gauge (Motif) library (both in contrib).
#define wxUSE_COMBOBOX      1
                                    // Define 1 to use COMBOXBOX control (Windows)
                                    // or FWW's ComboBox widget (Motif).
#define wxUSE_CHOICE      1
                                    // Define 1 to use CHOICE

#define wxUSE_RADIOBUTTON   1
                                    // Define 1 to use radio button control
#define wxUSE_RADIOBTN   1
                                    // Unfortunately someone introduced this one, too

#define wxUSE_SCROLLBAR   1
                                    // Define 1 to compile contributed wxScrollBar class

#define wxUSE_CHECKBOX 1
                                    // Define 1 to compile checkbox

#define wxUSE_LISTBOX 1
                                    // Define 1 to compile listbox

#define wxUSE_SPINBTN 1
                                    // Define 1 to compile spin button

// use wxStaticLine class (separator line in the dialog)?
#define wxUSE_STATLINE 1

#define wxUSE_CHECKLISTBOX 1
                                    // Define 1 to compile check listbox

#define wxUSE_CHOICE 1
                                    // Define 1 to compile choice

#define wxUSE_CARET       1
                                    // Define 1 to use wxCaret class
#define wxUSE_XPM_IN_MSW  1
                                    // Define 1 to support the XPM package in wxBitmap.
#define wxUSE_IMAGE_LOADING_IN_MSW        1
                                  // Use dynamic DIB loading/saving code in utils/dib under MSW.
#define wxUSE_RESOURCE_LOADING_IN_MSW     1
                                  // Use dynamic icon/cursor loading/saving code
                                  // under MSW.
#define wxUSE_WX_RESOURCES        1
                                  // Use .wxr resource mechanism (requires PrologIO library)

// support for startup tips (wxShowTip &c)
#define wxUSE_STARTUP_TIPS       1

// BC++/Win16 can't cope with the amount of data in resource.cpp
#if defined(__WIN16__) && defined(__BORLANDC__)
#undef wxUSE_WX_RESOURCES
#define wxUSE_WX_RESOURCES        0
#endif

#define wxUSE_DOC_VIEW_ARCHITECTURE 1
                                  // Set to 0 to disable document/view architecture
#define wxUSE_MDI_ARCHITECTURE  1
                                  // Set to 0 to disable MDI document/view architecture
#define wxUSE_PRINTING_ARCHITECTURE  1
                                    // Set to 0 to disable print/preview architecture code
#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
                                    // Set to 0 to disable PostScript print/preview architecture code
                                    // under Windows (just use Windows printing).
#define wxUSE_DYNAMIC_CLASSES     1
                                  // If 1, enables provision of run-time type information.
                                  // NOW MANDATORY: don't change.
#define wxUSE_MEMORY_TRACING      1
                                  // If 1, enables debugging versions of wxObject::new and
                                  // wxObject::delete *IF* __WXDEBUG__ is also defined.
                                  // WARNING: this code may not work with all architectures, especially
                                  // if alignment is an issue.
#define wxUSE_DEBUG_CONTEXT       1
                                  // If 1, enables wxDebugContext, for
                                  // writing error messages to file, etc. 
                                  // If __WXDEBUG__ is not defined, will still use
                                  // normal memory operators.
                                  // It's recommended to set this to 1,
                                  // since you may well need to output
                                  // an error log in a production
                                  // version (or non-debugging beta)
#define wxUSE_GLOBAL_MEMORY_OPERATORS 0
                                  // In debug mode, cause new and delete to be redefined globally.
                                  // If this causes problems (e.g. link errors), set this to 0.

#define wxUSE_DEBUG_NEW_ALWAYS 1
                                  // In debug mode, causes new to be defined to
                                  // be WXDEBUG_NEW (see object.h).
                                  // If this causes problems (e.g. link errors), set this to 0.
                                  // You may need to set this to 0 if using templates (at least
                                  // for VC++).

#define REMOVE_UNUSED_ARG 1
                                  // Set this to 0 if your compiler can't cope
                                  // with omission of prototype parameters.

#define wxUSE_ODBC                   1
                                    // Define 1 to use ODBC classes


#define wxODBC_FWD_ONLY_CURSORS   1
                                  // Some databases/ODBC drivers only allow forward scrolling cursors.
                                  // Unless you specifically want to use backward scrolling
                                  // cursors, and you know that all of the databases/ODBC drivers
                                  // that you will use these odbc classes with allow backward 
                                  // scrolling cursors, this setting should remain set to 1
                                  // for maximum database/driver compatibilty



#ifndef __MWERKS__
#define wxUSE_IOSTREAMH     0
#else
#define wxUSE_IOSTREAMH     1
#endif
                                  // VC++ 4.2 and above allows <iostream> and <iostream.h>
                                  // but you can't mix them. Set to 1 for <iostream.h>,
                                  // 0 for <iostream>

#define wxUSE_STREAMS       1
                                  // If enabled (1), compiles wxWindows streams classes

#define wxUSE_STD_IOSTREAM  1
                                  // Use standard C++ streams if 1. If 0, use wxWin
                                  // streams implementation.

#define wxUSE_WXCONFIG      1
                                  // if enabled, compiles built-in OS independent wxConfig
                                  // class and it's file (any platform) and registry (Win)
                                  // based implementations
#define wxUSE_THREADS       0
                                  // support for multithreaded applications: if
                                  // 1, compile in thread classes (thread.h)
                                  // and make the library thread safe
#define wxUSE_ZLIB          1
                                  // Use zlib for compression in streams and PNG code
#define wxUSE_LIBPNG        1
                                  // Use PNG bitmap code
#define wxUSE_LIBJPEG       0
                                  // Use JPEG bitmap code
#define wxUSE_SERIAL        0
                                  // Use serialization (requires utils/serialize)
#define wxUSE_DYNLIB_CLASS  0
                                  // Compile in wxLibrary class for run-time
                                  // DLL loading and function calling
#define wxUSE_TOOLTIPS      1
                                  // Define to use wxToolTip class and
                                  // wxWindow::SetToolTip() method
#define wxUSE_SOCKETS       0 // 0
                                  // Set to 1 to use socket classes
#define wxUSE_HTML          1 // 0
                                  // Set to 1 to use wxHTML sub-library
#define wxUSE_FS_ZIP        1 // 0
#define wxUSE_FS_INET       1 // 0     // Set to 1 to enable virtual file systems

#define wxUSE_BUSYINFO      1 // 0
                                  // wxBusyInfo displays window with message
                                  // when app is busy. Works in same way as
                                  // wxBusyCursor
#define wxUSE_ZIPSTREAM     1 // 0
                                  // input stream for reading from zip archives

/*
 * Finer detail
 *
 */

#define wxUSE_APPLE_IEEE          1
                                // if enabled, the float codec written by Apple
                                // will be used to write, in a portable way,
                                // float on the disk

// use wxFile class - required by i18n code, wxConfig and others - recommended
#define wxUSE_FILE                1

// use wxTextFile class: requires wxFile, required by wxConfig
#define wxUSE_TEXTFILE            1

// i18n support: _() macro, wxLocale class. Requires wxFile
#define wxUSE_INTL                1

// wxLogXXX functions - highly recommended
#define wxUSE_LOG                   1

// wxValidator class
#define wxUSE_VALIDATORS 1

// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
#define wxUSE_ACCEL 1

// wxSashWindow class
#define wxUSE_SASH 1

// text entry dialog and wxGetTextFromUser function
#define wxUSE_TEXTDLG 1

// wxToolBar class
#define wxUSE_TOOLBAR 1

// wxStatusBar class
#define wxUSE_STATUSBAR 1

// progress dialog class for lengthy operations
#define wxUSE_PROGRESSDLG 1

// wxDirDlg class for getting a directory name from user
#define wxUSE_DIRDLG 1

/*
 * MS Windows/Windows NT
 *
 */

#define wxUSE_OLE           1
                                // drag-and-drop, clipboard, OLE Automation

#if defined(__WIN95__)
#define wxUSE_CTL3D                      0
#else
#define wxUSE_CTL3D                      1
                                    // Define 1 to use Microsoft CTL3D library.
                                    // See note above about using FAFA and CTL3D.
#endif

#define wxUSE_COMMON_DIALOGS         1
                                    // On rare occasions (e.g. using DJGPP) may want
                                    // to omit common dialogs
                                    // (e.g. file selector, printer dialog).
                                    // Switching this off also switches off
                                    // the printing architecture and interactive
                                    // wxPrinterDC.
#define wxUSE_ITSY_BITSY             1
                                    // Define 1 to use Microsoft's ItsyBitsy
                                    // small title bar library, for wxMiniFrame
#define wxUSE_BITMAP_MESSAGE         1
                                    // Define 1 to use bitmap messages.
#define wxUSE_PORTABLE_FONTS_IN_MSW  0
                                    // Define 1 to use new portable font scheme in Windows
                                    // (used by default under X)
#define wxFONT_SIZE_COMPATIBILITY    0
                                    // Define 1 for font size to be backward compatible
                                    // to 1.63 and earlier. 1.64 and later define point
                                    // sizes to be compatible with Windows.
#define wxUSE_GENERIC_DIALOGS_IN_MSW 1
                                    // Define 1 to use generic dialogs in Windows, even though
                                    // they duplicate native common dialog (e.g. wxColourDialog)
#define wxUSE_PENWINDOWS 0
                                    // Set to 1 to use PenWindows

#define wxUSE_OWNER_DRAWN             0
                                    // Owner-drawn menus and listboxes

#define wxUSE_NATIVE_STATUSBAR        1
                                    // Set to 0 to use cross-platform wxStatusBar
#define wxUSE_DBWIN32                 1
                                    // Use Andrew Tucker's OutputDebugString implementation
                                    // (required on Win95 only). See utils.cpp.

/*
 * Any platform
 *
 */

#define wxUSE_TYPEDEFS               1
                                    // Use typedefs not classes for wxPoint
                                    // and others, to reduce overhead and avoid
                                    // MS C7 memory bug. Bounds checker
                                    // complains about deallocating
                                    // arrays of wxPoints if wxPoint is a class.


#endif
    // _WX_SETUP_H_