wxPython/distrib/wxPythonFull.spec.in

   1 #----------------------------------------------------------------------
   2 # Name:        wxPython.spec
   3 # Purpose:     RPM Build and packaging instructions
   4 #
   5 # Author:      Robin Dunn
   6 #
   7 # RCS-ID:      $Id$
   8 # Copyright:   (c) 2004 by Total Control Software
   9 # Licence:     wxWindows license
  10 #----------------------------------------------------------------------
  11
  12
  13 # The following values can be set on the rpmbuild command line with
  14 # --define 'name VALUE'  If no value is set on the command line then
  15 # the default value set here will be used instead.
  16
  17
  18 # Which version of Python to build with.  Used to assemble python
  19 # binary name so use '2.2', '2.3', etc.
  20 %if %{?pyver:0}%{!?pyver:1}
  21 %define pyver 2.3
  22 %endif
  23
  24
  25 # Which wxWidgets port to build and use.  Current acceptable values
  26 # are 'gtk' and 'gtk2'.
  27 %if %{?port:0}%{!?port:1}
  28 %define port gtk2
  29 %endif
  30
  31
  32 # Build in unicode mode?  Can only be used if port is gtk2, acceptable
  33 # values are '0' and '1'
  34 %if %{?unicode:0}%{!?unicode:1}
  35 %define unicode 1
  36 %endif
  37
  38
  39 # Should the builtin image and etc. libs be used, or system libs?
  40 # Distro specific RPMs should probably set this to 0, generic ones
  41 # should use 1.
  42 # NOTE: I'm trying 0 for this next release to see if I can get rid of
  43 # this...
  44 %if %{?builtin_libs:0}%{!?builtin_libs:1}
  45 %define builtin_libs 0
  46 %endif
  47
  48
  49 # Should --enable-debug_flag be used in release builds?  Using it
  50 # defines __WXDEBUG__ and gives us runtime diagnostics that are turned
  51 # into Python exceptions.  (So turning it on is a very helpful thing
  52 # IMO and is recommended.)  The code is still compiled with
  53 # optimization flags and and without debug info and such when this
  54 # option is used, it simply turns on some extra code.
  55 %if %{?debug_flag:0}%{!?debug_flag:1}
  56 %define debug_flag 1
  57 %endif
  58
  59
  60 # Used to set the Release tag below.  I normally use it to define what
  61 # distro the RPM was build on and also include the version of Python
  62 # it was built with.
  63 %if %{?release:0}%{!?release:1}
  64 %define release 1_py%{pyver}
  65 %endif
  66
  67
  68
  69 #----------------------------------------------------------------------
  70 # Other variables used below
  71
  72 %define pref       %{_prefix}
  73 %define python     /usr/bin/python%{pyver}
  74 %define tarname    @TARNAME@
  75 %define version    @VERSION@
  76 %define ver2       @VER2@
  77
  78 %define chartype   %(if [ "%{unicode}" = "1" ]; then echo unicode; else echo ansi; fi)
  79 %define gtktype    %(if [ "%{port}" = "gtk2" ]; then echo 2; fi)
  80 %define using_gtk1 %(if [ "%{port}" = "gtk" ]; then echo 1; else echo 0; fi)
  81
  82 %define wxprefbase %{pref}/lib/wxPython
  83 %define wxpref     %{wxprefbase}-%{version}-%{port}-%{chartype}
  84 %define pkgname    wxPython
  85
  86 # turn off the generation of debuginfo rpm  (RH9) ??
  87 %define debug_package %{nil}
  88
  89
  90 #----------------------------------------------------------------------
  91 # Package definition
  92 #----------------------------------------------------------------------
  93 Name:      %{pkgname}%{ver2}
  94 Summary:   Cross platform GUI toolkit for Python
  95 Version:   %{version}
  96 Release:   %{release}
  97 Source0:   %{tarname}-%{version}.tar.gz
  98 License:   wx Library Licence, Version 3
  99 URL:       http://wxPython.org/
 100 Packager:  Robin Dunn <robin@alldunn.com>
 101 Group:     Development/Python
 102 BuildRoot: %{_tmppath}/%{pkgname}-buildroot
 103 Prefix:    %{pref}
 104
 105 %description
 106 Cross platform GUI toolkit for Python
 107
 108
 109
 110
 111 %package -n %{pkgname}%{ver2}-%{port}-%{chartype}
 112 Summary:   Cross platform GUI toolkit for Python
 113 Group:     Development/Python
 114 Requires:  %{pkgname}-common
 115 Obsoletes: wxPythonGTK%{gtktype}-py%{pyver}
 116 Provides:  wxPython
 117
 118
 119 %description -n %{pkgname}%{ver2}-%{port}-%{chartype}
 120 wxPython is a GUI toolkit for the Python programming language. It
 121  allows Python programmers to create programs with a robust, highly
 122 functional graphical user interface, simply and easily. It is
 123 implemented as a Python extension module (native code) that wraps the
 124 popular wxWidgets cross platform GUI library, which is written in C++.
 125
 126 wxPython is a cross-platform toolkit. The same program will usually
 127 run on multiple platforms without modification. Currently supported
 128 platforms are 32-bit Microsoft Windows, most Unix or unix-like
 129 systems, and Macintosh OS X.
 130
 131 This package contains the wxPython runtime files built for the
 132 wxWidgets %{port} port with %{chartype} character type.
 133
 134
 135
 136
 137
 138 %package -n %{pkgname}-common-%{port}-%{chartype}
 139 Summary: Common files for needed by all wxPython runtimes
 140 Group: Development/Python
 141 Provides: %{pkgname}-common
 142
 143 # They obsolete each other so any of them can be installed over another
 144 # without conflicts
 145 Obsoletes: %{pkgname}-common-gtk-ansi
 146 Obsoletes: %{pkgname}-common-gtk2-ansi
 147 Obsoletes: %{pkgname}-common-gtk2-unicode
 148
 149 %description -n %{pkgname}-common-%{port}-%{chartype}
 150 This package contains the common files needed by any version of the
 151 wxPython runtime.  This pacakge also installs a wx.pth file which will
 152 determine which of the installed runtimes is the default version of
 153 wxPython that is imported automatically with a bare "import wx".
 154
 155
 156
 157
 158
 159 %package -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 160 Summary: wxPython development files
 161 Group: Development/Libraries
 162 Requires: %{pkgname}%{ver2}-%{port}-%{chartype} = %{version}
 163
 164 %description -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 165 This packages contains the headers and etc. for building apps or
 166 Python extension modules that use the same wxWidgets shared libraries
 167 that wxPython uses.
 168
 169
 170
 171 #----------------------------------------------------------------------
 172 %prep
 173 %setup -q -n %{tarname}-%{version}
 174
 175
 176 #----------------------------------------------------------------------
 177 %build
 178
 179 WXDIR=`pwd`
 180
 181 # Configure and build wxWidgets
 182 mkdir bld
 183 cd bld
 184 ../configure \
 185 %if %{using_gtk1}
 186         --with-gtk=1 \
 187 %else
 188         --with-gtk=2 \
 189 %endif
 190         --prefix=%{wxpref} \
 191         --enable-monolithic \
 192         --disable-rpath \
 193         --with-opengl \
 194         --enable-geometry \
 195         --enable-optimise \
 196         --enable-sound  --with-sdl \
 197         --enable-display \
 198 %if %{unicode}
 199         --enable-unicode \
 200 %else
 201         --disable-unicode \
 202 %endif
 203 %if %{debug_flag}
 204         --enable-debug_flag \
 205 %endif
 206         --disable-debugreport \
 207 %if %{builtin_libs}
 208         --with-libjpeg=builtin \
 209         --with-libpng=builtin \
 210         --with-libtiff=builtin \
 211         --with-zlib=builtin \
 212 %endif
 213
 214
 215 make
 216 make -C contrib/src/animate
 217 make -C contrib/src/gizmos
 218 make -C contrib/src/stc
 219
 220
 221
 222 # Build wxPython
 223 cd $WXDIR/wxPython
 224 %{python} setup.py \
 225         WXPORT=%{port} \
 226         UNICODE=%{unicode} \
 227         EP_ADD_OPTS=1 \
 228         NO_SCRIPTS=1 \
 229         WX_CONFIG="$WXDIR/bld/wx-config --no_rpath" \
 230         build_ext --rpath=%{wxpref}/lib \
 231         build
 232
 233
 234
 235 #----------------------------------------------------------------------
 236 %install
 237
 238 WXDIR=`pwd`
 239
 240 # Install wxGTK and contribs
 241 cd bld
 242 make prefix=$RPM_BUILD_ROOT%{wxpref} install
 243 make -C contrib/src/animate prefix=$RPM_BUILD_ROOT%{wxpref} install
 244 make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install
 245 make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install
 246
 247
 248
 249 # Install wxPython for wxGTK
 250 cd $WXDIR/wxPython
 251 %{python} setup.py \
 252         WXPORT=%{port} \
 253         UNICODE=%{unicode} \
 254         EP_ADD_OPTS=1 \
 255         NO_SCRIPTS=1 \
 256         WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref} --no_rpath" \
 257         build_ext --rpath=%{wxpref}/lib \
 258         install \
 259         --root=$RPM_BUILD_ROOT
 260
 261
 262 # remove the wx-config symlink, we'll redo it when installing the -devel package
 263 rm $RPM_BUILD_ROOT%{wxpref}/bin/wx-config
 264
 265 # make sure that debug info is stripped
 266 strip $RPM_BUILD_ROOT%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/wx/*.so
 267
 268
 269 # Since I want this RPM to be as generic as possible I won't let
 270 # distutils copy the scripts (NO_SCRIPTS=1 above) since it will mangle
 271 # the #! line to use the real python pathname.  Since some distros
 272 # install python 2.2 as python2 and others as python I can't let
 273 # distutils do that otherwise the dependencies will be fouled up.
 274 # Copy them manually instead, leaving the #!/usr/bin/env line intact.
 275 cd $WXDIR/wxPython
 276 mkdir -p $RPM_BUILD_ROOT%{pref}/bin
 277 for s in \
 278         helpviewer \
 279         img2png \
 280         img2py \
 281         img2xpm \
 282         pyalacarte \
 283         pyalamode \
 284         pycrust \
 285         pywrap \
 286         pyshell \
 287         pywxrc \
 288         xrced; do
 289     cp scripts/$s $RPM_BUILD_ROOT%{pref}/bin
 290 done
 291
 292
 293
 294 # install KDE & GNOME menu items
 295 mkdir -p $RPM_BUILD_ROOT%{_datadir}/applnk/Development
 296 mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications
 297 for d in distrib/*.desktop; do
 298         install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applnk/Development
 299         install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applications
 300 done
 301
 302 # install KDE icons
 303 mkdir -p $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/{16x16,32x32}/apps
 304 mkdir -p $RPM_BUILD_ROOT%{_datadir}/pixmaps
 305 install -m 644 wx/py/PyCrust_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/PyCrust.png
 306 install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/PyCrust.png
 307 install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/PyCrust.png
 308 install -m 644 wx/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/XRCed.png
 309 install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/XRCed.png
 310 install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/XRCed.png
 311
 312 # install Mandrake menu items
 313 mkdir -p $RPM_BUILD_ROOT%{_libdir}/menu
 314 cat > $RPM_BUILD_ROOT%{_libdir}/menu/%{pkgname} <<EOF
 315 ?package(%{pkgname}): \\
 316         command="%{_bindir}/pyshell" \\
 317         needs="X11" \\
 318         icon="PyCrust.png" \\
 319         section="Applications/Development/Tools" \\
 320         title="PyShell" \\
 321         longtitle="GUI Python Shell"
 322 ?package(%{pkgname}): \\
 323         command="%{_bindir}/pycrust" \\
 324         needs="X11" \\
 325         icon="PyCrust.png" \\
 326         section="Applications/Development/Tools" \\
 327         title="PyCrust" \\
 328         longtitle="GUI Python Shell with Filling"
 329 ?package(%{pkgname}): \\
 330         command="%{_bindir}/pyalamode" \\
 331         needs="X11" \\
 332         icon="PyCrust.png" \\
 333         section="Applications/Development/Tools" \\
 334         title="PyAlaMode" \\
 335         longtitle="GUI Python Shell with Filling and editor windows"
 336 ?package(%{pkgname}): \\
 337         command="%{_bindir}/xrced" \\
 338         needs="X11" \\
 339         icon="XRCed.png" \\
 340         section="Applications/Development/Tools" \\
 341         title="XRCed" \\
 342         longtitle="wxPython XRC resource editor"
 343 EOF
 344
 345
 346 #----------------------------------------------------------------------
 347
 348 %post -n %{pkgname}%{ver2}-%{port}-%{chartype}
 349 if [ ! -e %{wxprefbase} ]; then
 350         ln -s %{pkgname}-%{version}-%{port}-%{chartype}  %{wxprefbase}
 351 fi
 352
 353 %preun -n %{pkgname}%{ver2}-%{port}-%{chartype}
 354 if [ -L %{wxprefbase} ]; then
 355         if [ `readlink %{wxprefbase}` == %{pkgname}-%{version}-%{port}-%{chartype} ]; then
 356                 rm -f %{wxprefbase}
 357         fi
 358 fi
 359
 360
 361
 362
 363 %post -n %{pkgname}-common-%{port}-%{chartype}
 364 # This is done on Mandrake to update its menus:
 365 if [ -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
 366
 367 %postun -n %{pkgname}-common-%{port}-%{chartype}
 368 # This is done on Mandrake to update its menus:
 369 if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
 370
 371
 372
 373 %post -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 374 cd %{wxpref}/bin
 375 ln -s ../lib/wx/config/%{port}-%{chartype}*  wx-config
 376
 377 %preun -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 378 rm %{wxpref}/bin/wx-config
 379
 380
 381 #----------------------------------------------------------------------
 382 %clean
 383 [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
 384
 385
 386 #----------------------------------------------------------------------
 387
 388 %files -n %{pkgname}%{ver2}-%{port}-%{chartype}
 389 %defattr(-,root,root)
 390 %doc docs/preamble.txt docs/licence.txt docs/lgpl.txt docs/readme.txt docs/changes.txt
 391 %doc wxPython/docs/*
 392 %dir %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}
 393 %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/*
 394 %dir %{wxpref}
 395 %dir %{wxpref}/lib
 396 %{wxpref}/lib/libwx_gtk*
 397 %{wxpref}/share
 398
 399
 400
 401 %files -n %{pkgname}-common-%{port}-%{chartype}
 402 %defattr(-,root,root)
 403 %{pref}/lib*/python%{pyver}/site-packages/wxversion.*
 404 %{pref}/lib*/python%{pyver}/site-packages/wx.pth
 405 %{_bindir}/*
 406 %{_datadir}/applnk/Development/*
 407 %{_datadir}/applications/*
 408 %{_datadir}/icons/hicolor/*/apps/*
 409 %{_datadir}/pixmaps/*
 410 %{_libdir}/menu/*
 411
 412
 413
 414
 415
 416 %files -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 417 %defattr(-,root,root)
 418 %{wxpref}/include
 419 %{wxpref}/lib/wx
 420 %dir %{wxpref}/bin
 421
 422
 423 #----------------------------------------------------------------------
 424 # end of file