wxDialog change (Show() completely rewritten, modal dialogs handling changed)

[wxWidgets.git] / include / wx / msw / setup0.h

/////////////////////////////////////////////////////////////////////////////
// Name:        wx/msw/setup.h
// Purpose:     Configuration for the library
// Author:      Julian Smart
// Modified by:
// Created:     01/02/97
// RCS-ID:      $Id$
// Copyright:   (c) Julian Smart
// Licence:     wxWindows licence
/////////////////////////////////////////////////////////////////////////////

#ifndef _WX_SETUP_H_
#define _WX_SETUP_H_

// ----------------------------------------------------------------------------
// global settings
// ----------------------------------------------------------------------------

// define this to 0 when building wxBase library
#define wxUSE_GUI            1

// ----------------------------------------------------------------------------
// compatibility settings
// ----------------------------------------------------------------------------

// This setting determines the compatibility with 1.68 API:
// Level 0: no backward compatibility, all new features
// Level 1: some extra methods are defined for compatibility.
//
// Default is 0.
//
// Recommended setting: 0 (in fact the compatibility code is now very minimal
// so there is little advantage to setting it to 1.
#define WXWIN_COMPATIBILITY  0

// in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap,
// but this is very dangerous because you can mistakenly pass an icon instead
// of a bitmap to a function taking "const wxBitmap&" - which will *not* work
// because an icon is not a valid bitmap
//
// Starting from 2.1.12, you have the choice under this backwards compatible
// behaviour (your code will still compile, but probably won't behave as
// expected!) and not deriving wxIcon class from wxBitmap, but providing a
// conversion ctor wxBitmap(const wxIcon&) instead.
//
// Recommended setting: 0
#define wxICON_IS_BITMAP    0

// ----------------------------------------------------------------------------
// non GUI features selection
// ----------------------------------------------------------------------------

// Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
// integer which is implemented in terms of native 64 bit integers if any or
// uses emulation otherwise.
//
// This class is required by wxDateTime and so you should enable it if you want
// to use wxDateTime. For most modern platforms, it will use the native 64 bit
// integers in which case (almost) all of its functions are inline and it
// almost does not take any space, so there should be no reason to switch it
// off.
//
// Recommended setting: 1
#define wxUSE_LONGLONG      1

// Set wxUSE_TIMEDATE to 1 to compile the wxDateTime and related classes which
// allow to manipulate dates, times and time intervals. wxDateTime replaces the
// old wxTime and wxDate classes which are still provided for backwards
// compatibility (and implemented in terms of wxDateTime).
//
// Note that this class is relatively new and is still officially in alpha
// stage because some features are not yet (fully) implemented. It is already
// quite useful though and should only be disabled if you are aiming at
// absolutely minimal version of the library.
//
// Requires: wxUSE_LONGLONG
//
// Recommended setting: 1
#define wxUSE_TIMEDATE      1

// Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
// which allow the application to store its settings in the persistent
// storage. Setting this to 1 will also enable on-demand creation of the
// global config object in wxApp.
//
// See also wxUSE_CONFIG_NATIVE below.
//
// Recommended setting: 1
#define wxUSE_CONFIG           1

// If wxUSE_CONFIG is 1, you may choose to use either the native config
// classes under Windows (using .INI files under Win16 and the registry under
// Win32) or the portable text file format used by the config classes under
// Unix.
//
// Default is 1 to use native classes. Note that you may still use
// wxFileConfig even if you set this to 1 - just the config object created by
// default for the applications needs will be a wxRegConfig or wxIniConfig and
// not wxFileConfig.
//
// Recommended setting: 1
#define wxUSE_CONFIG_NATIVE   1

// If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
// to connect/disconnect from the network and be notified whenever the dial-up
// network connection is established/terminated.
//
// Default is 1.
//
// Recommended setting: 1
#define wxUSE_DIALUP_MANAGER   1

// ----------------------------------------------------------------------------
// Optional controls
// ----------------------------------------------------------------------------

// wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
// classes at all. Otherwise, use the native toolbar class unless
// wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
// supports some features which might not be supported by the native wxToolBar
// class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1.
//
// Default is 1 for all settings.
//
// Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for
// wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility).
#define wxUSE_TOOLBAR 1
#define wxUSE_TOOLBAR_NATIVE 1
#define wxUSE_TOOLBAR_SIMPLE 1

// wxNotebook is a control with several "tabs" located on one of its sides. It
// may be used ot logically organise the data presented to the user instead of
// putting everything in one huge dialog. It replaces wxTabControl and related
// classes of wxWin 1.6x.
//
// Default is 1.
//
// Recommended setting: 1
#define wxUSE_NOTEBOOK 1

// The corresponding controls will be compiled in if wxUSE_<CONTROL> is set to
// 1 and not compiled into the library otherwise.
//
// Default is 1 for everything.
//
// Recommended setting: 1 (library might fail to compile for some combinations
// of disabled controls) 
#define wxUSE_COMBOBOX     1
#define wxUSE_CHOICE       1
#define wxUSE_RADIOBTN     1
#define wxUSE_RADIOBOX     1
#define wxUSE_SCROLLBAR    1
#define wxUSE_CHECKBOX     1
#define wxUSE_LISTBOX      1
#define wxUSE_SPINBTN      1
#define wxUSE_SPINCTRL     1
#define wxUSE_STATLINE     1
#define wxUSE_CHECKLISTBOX 1
#define wxUSE_CHOICE       1
#define wxUSE_CARET        1
#define wxUSE_SLIDER       1

// ----------------------------------------------------------------------------
// Metafiles support
// ----------------------------------------------------------------------------

// Windows supports the graphics format known as metafile which is, though not
// portable, is widely used under Windows and so is supported by wxWin (under
// Windows only, of course). Win16 (Win3.1) used the so-called "Window
// MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
// Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
// default, WMFs will be used under Win16 and EMFs under Win32. This may be
// changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
// wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
// in any metafile related classes at all.
//
// Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
//
// Recommended setting: default or 0 for everything for portable programs.
#define wxUSE_METAFILE              1
#define wxUSE_ENH_METAFILE          1
#define wxUSE_WIN_METAFILES_ALWAYS  0

// ----------------------------------------------------------------------------
// Postscript support settings
// ----------------------------------------------------------------------------

#define wxUSE_POSTSCRIPT  0
                                // 0 for no PostScript device context
#define wxUSE_AFM_FOR_POSTSCRIPT 0
                                // 1 to use font metric files in GetTextExtent
#define wxUSE_IPC         1
                                // 0 for no interprocess comms
// Note: wxHELP uses IPC under X so these are interdependent!
#define wxUSE_HELP        1
                                // 0 for no help facility
#define wxUSE_RESOURCES   1
                                // 0 for no wxGetResource/wxWriteResource
#define wxUSE_CONSTRAINTS 1
                                // 0 for no window layout constraint system

#define wxUSE_CLIPBOARD   1
                                // 0 for no clipboard functions

#define wxUSE_SPLINES     1
                                // 0 for no splines

#define wxUSE_DRAG_AND_DROP 1
                                // 0 for no drag and drop

#define wxUSE_BUTTONBAR    1
                                // Define 1 to use buttonbar classes (enhanced toolbar
                                // for MS Windows)
#define wxUSE_GAUGE        1
                                // Define 1 to use Microsoft's gauge (Windows)
                                // or Bull's gauge (Motif) library (both in contrib).
#define wxUSE_NEW_GRID     1
                                // Define 1 to use the new wxGrid class
                                // (still under development, define 0 to
                                //  use existing wxGrid class)
#define wxUSE_XPM_IN_MSW   1
                                // Define 1 to support the XPM package in wxBitmap.
#define wxUSE_IMAGE_LOADING_IN_MSW        1
                                // Use dynamic DIB loading/saving code in utils/dib under MSW.
#define wxUSE_RESOURCE_LOADING_IN_MSW     1
                                // Use dynamic icon/cursor loading/saving code
                                // under MSW.
#define wxUSE_WX_RESOURCES        1
                                // Use .wxr resource mechanism (requires PrologIO library)

#define wxUSE_STARTUP_TIPS        1
                                // support for startup tips (wxShowTip &c)

#define wxUSE_DOC_VIEW_ARCHITECTURE 1
                                // Set to 0 to disable document/view architecture
#define wxUSE_MDI_ARCHITECTURE    1
                                // Set to 0 to disable MDI document/view architecture
#define wxUSE_PRINTING_ARCHITECTURE  1
                                // Set to 0 to disable print/preview architecture code
#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
                                // Set to 0 to disable PostScript print/preview architecture code
                                // under Windows (just use Windows printing).
#define wxUSE_DYNAMIC_CLASSES     1
                                // If 1, enables provision of run-time type information.
                                // NOW MANDATORY: don't change.
#define wxUSE_MEMORY_TRACING      1
                                // If 1, enables debugging versions of wxObject::new and
                                // wxObject::delete *IF* __WXDEBUG__ is also defined.
                                // WARNING: this code may not work with all architectures, especially
                                // if alignment is an issue.
#define wxUSE_DEBUG_CONTEXT       1
                                // If 1, enables wxDebugContext, for
                                // writing error messages to file, etc.
                                // If __WXDEBUG__ is not defined, will still use
                                // normal memory operators.
                                // It's recommended to set this to 1,
                                // since you may well need to output
                                // an error log in a production
                                // version (or non-debugging beta)
#define wxUSE_GLOBAL_MEMORY_OPERATORS 1
                                // In debug mode, cause new and delete to be redefined globally.
                                // If this causes problems (e.g. link errors), set this to 0.

#define wxUSE_DEBUG_NEW_ALWAYS 1
                                // In debug mode, causes new to be defined to
                                // be WXDEBUG_NEW (see object.h).
                                // If this causes problems (e.g. link errors), set this to 0.
                                // You may need to set this to 0 if using templates (at least
                                // for VC++).

#define REMOVE_UNUSED_ARG   1
                                // Set this to 0 if your compiler can't cope
                                // with omission of prototype parameters.

#define wxUSE_ODBC          0
                                // Define 1 to use ODBC classes

#define wxODBC_FWD_ONLY_CURSORS  1
                                // For backward compatibility reasons, this parameter now only
                                // controls the default scrolling method used by cursors.  This
                                // default behavior can be overriden by setting the second param
                                // of wxDB::GetDbConnection() to indicate whether the connection
                                // (and any wxTable()s that use the connection) should support
                                // forward only scrolling of cursors, or both forward and backward
                                // Support for backward scrolling cursors is dependent on the 
                                // data source as well as the ODBC driver being used.

#ifndef __MWERKS__
#define wxUSE_IOSTREAMH     1
#else
#define wxUSE_IOSTREAMH     1
#endif
                                // VC++ 4.2 and above allows <iostream> and <iostream.h>
                                // but you can't mix them. Set to 1 for <iostream.h>,
                                // 0 for <iostream>

#define wxUSE_STREAMS       1
                                // If enabled (1), compiles wxWindows streams classes

#define wxUSE_STD_IOSTREAM  0
                                // Use standard C++ streams if 1. If 0, use wxWin
                                // streams implementation.

#define wxUSE_WXCONFIG      1
                                // if enabled, compiles built-in OS independent wxConfig
                                // class and it's file (any platform) and registry (Win)
                                // based implementations
#define wxUSE_THREADS       1
                                // support for multithreaded applications: if
                                // 1, compile in thread classes (thread.h)
                                // and make the library thread safe
#define wxUSE_ZLIB          1
                                // Use zlib for compression in streams and PNG code
#define wxUSE_LIBPNG        1
                                // Use PNG bitmap/image code
#define wxUSE_LIBJPEG       1
                                // Use JPEG bitmap/image code
#define wxUSE_LIBTIFF       0
                                // Use TIFF bitmap/image code
#define wxUSE_GIF           1
                                // Use GIF bitmap/image code
#define wxUSE_PNM           1
                                // Use PNM bitmap/image code
#define wxUSE_PCX           1
                                // Use PCX bitmap/image code
#define wxUSE_SERIAL        0
                                // Use serialization (requires utils/serialize)
#define wxUSE_DYNLIB_CLASS  0
                                // Compile in wxLibrary class for run-time
                                // DLL loading and function calling
#define wxUSE_TOOLTIPS      1
                                // Define to use wxToolTip class and
                                // wxWindow::SetToolTip() method
#define wxUSE_SOCKETS       1
                                // Set to 1 to use socket classes
#define wxUSE_HTML          1
                                // Set to 1 to use wxHTML sub-library
#define wxUSE_FS_ZIP        1
#define wxUSE_FS_INET       1   // Set to 1 to enable virtual file systems

#define wxUSE_BUSYINFO      1
                                // wxBusyInfo displays window with message
                                // when app is busy. Works in same way as
                                // wxBusyCursor
#define wxUSE_ZIPSTREAM     1
                                // input stream for reading from zip archives

/*
 * Finer detail
 *
 */

#define wxUSE_APPLE_IEEE          1
                                // if enabled, the float codec written by Apple
                                // will be used to write, in a portable way,
                                // float on the disk

// use wxFile class - required by i18n code, wxConfig and others - recommended
#define wxUSE_FILE                1

// use wxTextFile class: requires wxFile, required by wxConfig
#define wxUSE_TEXTFILE            1

// i18n support: _() macro, wxLocale class. Requires wxFile
#define wxUSE_INTL                1

// wxLogXXX functions - highly recommended
#define wxUSE_LOG                 1

// wxValidator class
#define wxUSE_VALIDATORS 1

// wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
#define wxUSE_ACCEL 1

// wxSashWindow class
#define wxUSE_SASH 1

// text entry dialog and wxGetTextFromUser function
#define wxUSE_TEXTDLG 1

// wxStatusBar class
#define wxUSE_STATUSBAR 1

// progress dialog class for lengthy operations
#define wxUSE_PROGRESSDLG 1

// wxDirDlg class for getting a directory name from user
#define wxUSE_DIRDLG 1

/*
 * MS Windows/Windows NT
 *
 */

#define wxUSE_OLE           1
                                // drag-and-drop, clipboard, OLE Automation

#if defined(__WIN95__)
#define wxUSE_CTL3D                      0
#else
#define wxUSE_CTL3D                      1
                                // Define 1 to use Microsoft CTL3D library.
                                // See note above about using FAFA and CTL3D.
#endif

// can we use RICHEDIT control?
#if defined(__WIN95__) && !defined(__TWIN32__) && !defined(__GNUWIN32_OLD__)
#define wxUSE_RICHEDIT 1
#else
#define wxUSE_RICHEDIT 0
#endif

#define wxUSE_COMMON_DIALOGS         1
                                // On rare occasions (e.g. using DJGPP) may want
                                // to omit common dialogs
                                // (e.g. file selector, printer dialog).
                                // Switching this off also switches off
                                // the printing architecture and interactive
                                // wxPrinterDC.
#define wxUSE_ITSY_BITSY             1
                                // Define 1 to use Microsoft's ItsyBitsy
                                // small title bar library, for wxMiniFrame
#define wxUSE_BITMAP_MESSAGE         1
                                // Define 1 to use bitmap messages.
#define wxUSE_PORTABLE_FONTS_IN_MSW  0
                                // Define 1 to use new portable font scheme in Windows
                                // (used by default under X)
#define wxFONT_SIZE_COMPATIBILITY    0
                                // Define 1 for font size to be backward compatible
                                // to 1.63 and earlier. 1.64 and later define point
                                // sizes to be compatible with Windows.
#define wxUSE_GENERIC_DIALOGS_IN_MSW 1
                                // Define 1 to use generic dialogs in Windows, even though
                                // they duplicate native common dialog (e.g. wxColourDialog)
#define wxUSE_PENWINDOWS 0
                                // Set to 1 to use PenWindows

#define wxUSE_OWNER_DRAWN             1
                                // Owner-drawn menus and listboxes

#define wxUSE_NATIVE_STATUSBAR        1
                                // Set to 0 to use cross-platform wxStatusBar

/*
 * Any platform
 *
 */

#define wxUSE_TYPEDEFS               0
                                // Use typedefs not classes for wxPoint
                                // and others, to reduce overhead and avoid
                                // MS C7 memory bug. Bounds checker
                                // complains about deallocating
                                // arrays of wxPoints if wxPoint is a class.

#if defined(__MINGW32__) && ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95)))
#ifndef wxUSE_NORLANDER_HEADERS
#   define wxUSE_NORLANDER_HEADERS 1
#endif
#endif

#if (!defined(WIN32) && !defined(__WIN32__)) || (defined(__GNUWIN32__) && !defined(wxUSE_NORLANDER_HEADERS))
// Can't use OLE drag and drop in Windows 3.1 because we don't know how
// to implement UUIDs
// GnuWin32 doesn't have appropriate headers for e.g. IUnknown.
#undef wxUSE_DRAG_AND_DROP
#define wxUSE_DRAG_AND_DROP 0
#endif

// Only WIN32 supports wxStatusBar95
#if !defined(__WIN32__) && wxUSE_NATIVE_STATUSBAR
#undef  wxUSE_NATIVE_STATUSBAR
#define wxUSE_NATIVE_STATUSBAR 0
#endif

// Salford C++ doesn't like some of the memory operator definitions
#ifdef __SALFORDC__
#undef  wxUSE_MEMORY_TRACING
#define wxUSE_MEMORY_TRACING      0

#undef wxUSE_GLOBAL_MEMORY_OPERATORS
#define wxUSE_GLOBAL_MEMORY_OPERATORS 0

#undef wxUSE_DEBUG_NEW_ALWAYS
#define wxUSE_DEBUG_NEW_ALWAYS 0

#undef wxUSE_THREADS
#define wxUSE_THREADS 0

#undef wxUSE_OWNER_DRAWN
#define wxUSE_OWNER_DRAWN 0
#endif

#ifdef __TWIN32__

#undef wxUSE_THREADS
#define wxUSE_THREADS 0

#undef wxUSE_ODBC
#define wxUSE_ODBC 0

#endif

// BC++/Win16 can't cope with the amount of data in resource.cpp
#if defined(__WIN16__) && defined(__BORLANDC__)
#undef wxUSE_WX_RESOURCES
#define wxUSE_WX_RESOURCES        0

#undef wxUSE_ODBC
#define wxUSE_ODBC                0
#endif

#if defined(__WXMSW__) && defined(__WATCOMC__)
#undef wxUSE_LIBJPEG
#define wxUSE_LIBJPEG 0
#endif

#if defined(__WXMSW__) && !defined(__WIN32__)

#undef wxUSE_SOCKETS
#define wxUSE_SOCKETS 0

#undef wxUSE_THREADS
#define wxUSE_THREADS 0

#undef wxUSE_TOOLTIPS
#define wxUSE_TOOLTIPS 0

#undef wxUSE_SPINCTRL
#define wxUSE_SPINCTRL 0

#undef wxUSE_SPINBTN
#define wxUSE_SPINBTN 0

#undef wxUSE_LIBPNG
#define wxUSE_LIBPNG 0

#undef wxUSE_LIBJPEG
#define wxUSE_LIBJPEG 0

#undef wxUSE_GIF
#define wxUSE_GIF 0

#undef wxUSE_PNM
#define wxUSE_PNM 0

#undef wxUSE_PCX
#define wxUSE_PCX 0

#endif

#endif
    // _WX_SETUP_H_