docs/latex/wx/tlog.tex

   1 \section{wxLog classes overview}\label{wxlogoverview}
   2
   3 Classes: \helpref{wxLog}{wxlog},\\
   4 \helpref{wxLogStderr}{wxlogstderr},\\
   5 \helpref{wxLogStream}{wxlogstream},\\
   6 \helpref{wxLogTextCtrl}{wxlogtextctrl},\\
   7 \helpref{wxLogWindow}{wxlogwindow},\\
   8 \helpref{wxLogGui}{wxloggui},\\
   9 \helpref{wxLogNull}{wxlognull},\\
  10 \helpref{wxLogChain}{wxlogchain},\\
  11 \helpref{wxLogPassThrough}{wxlogpassthrough},\\
  12 \helpref{wxStreamToTextRedirector}{wxstreamtotextredirector}
  13
  14 This is a general overview of logging classes provided by wxWidgets. The word
  15 logging here has a broad sense, including all of the program output, not only
  16 non interactive messages. The logging facilities included in wxWidgets provide
  17 the base {\it wxLog} class which defines the standard interface for a {\it log
  18 target} as well as several standard implementations of it and a family of
  19 functions to use with them.
  20
  21 First of all, no knowledge of {\it wxLog} classes is needed to use them. For
  22 this, you should only know about {\it wxLogXXX()} functions. All of them have
  23 the same syntax as {\it printf()} or {\it vprintf()} , i.e. they take the
  24 format string as the first argument and respectively a variable number of
  25 arguments or a variable argument list pointer. Here are all of them:
  26
  27 \begin{itemize}\itemsep=0pt
  28 \item{\bf wxLogFatalError} which is like {\it wxLogError}, but also
  29 terminates the program with the exit code $3$ (using {\it abort()} standard
  30 function). Unlike for all the other logging functions, this function can't be
  31 overridden by a log target.
  32 \item{\bf wxLogError} is the function to use for error messages, i.e. the
  33 messages that must be shown to the user. The default processing is to pop up a
  34 message box to inform the user about it.
  35 \item{\bf wxLogWarning} for warnings - they are also normally shown to the
  36 user, but don't interrupt the program work.
  37 \item{\bf wxLogMessage} is for all normal, informational messages. They also
  38 appear in a message box by default (but it can be changed, see below).
  39 \item{\bf wxLogVerbose} is for verbose output. Normally, it is suppressed, but
  40 might be activated if the user wishes to know more details about the program
  41 progress (another, but possibly confusing name for the same function is {\bf
  42 wxLogInfo}).
  43 \item{\bf wxLogStatus} is for status messages - they will go into the status
  44 bar of the active or specified (as the first argument) \helpref{wxFrame}{wxframe} if it has one.
  45 \item{\bf wxLogSysError} is mostly used by wxWidgets itself, but might be
  46 handy for logging errors after system call (API function) failure. It logs the
  47 specified message text as well as the last system error
  48 code ({\it errno} or {\it ::GetLastError()} depending on the platform) and
  49 the corresponding error message. The second form of this function takes the
  50 error code explicitly as the first argument.
  51 \item{\bf wxLogDebug} is {\bf the} right function for debug output. It only
  52 does anything at all in the debug mode (when the preprocessor symbol
  53 \_\_WXDEBUG\_\_ is defined) and expands to nothing in release mode (otherwise).
  54 {\bf Tip:} under Windows, you must either run the program under debugger or
  55 use a 3rd party program such as \urlref{DbgView}{http://www.sysinternals.com}
  56 to actually see the debug output.
  57 \item{\bf wxLogTrace} as {\bf wxLogDebug} only does something in debug
  58 build. The reason for making it a separate function from it is that usually
  59 there are a lot of trace messages, so it might make sense to separate them
  60 from other debug messages which would be flooded in them. Moreover, the second
  61 version of this function takes a trace mask as the first argument which allows
  62 to further restrict the amount of messages generated.
  63 \end{itemize}
  64
  65 The usage of these functions should be fairly straightforward, however it may
  66 be asked why not use the other logging facilities, such as C standard stdio
  67 functions or C++ streams. The short answer is that they're all very good
  68 generic mechanisms, but are not really adapted for wxWidgets, while the log
  69 classes are. Some of advantages in using wxWidgets log functions are:
  70
  71 \begin{itemize}\itemsep=0pt
  72 \item{\bf Portability} It is a common practice to use {\it printf()}
  73 statements or cout/cerr C++ streams for writing out some (debug or otherwise)
  74 information.
  75 Although it works just fine under Unix, these messages go strictly nowhere
  76 under Windows where the stdout of GUI programs is not assigned to anything.
  77 Thus, you might view {\it wxLogMessage()} as a simple substitute for {\it
  78 printf()}.
  79
  80 You can also redirect the {\it wxLogXXX} calls to {\it cout} by just writing:
  81 {\small
  82 \begin{verbatim}
  83   wxLog *logger=new wxLogStream(&cout);
  84   wxLog::SetActiveTarget(logger);
  85 \end{verbatim}
  86 }
  87
  88 Finally, there is also a possibility to redirect the output sent to {\it cout}
  89 to a \helpref{wxTextCtrl}{wxtextctrl} by using the
  90 \helpref{wxStreamToTextRedirector}{wxstreamtotextredirector} class.
  91 \item{\bf Flexibility} The output of wxLog functions can be redirected or
  92 suppressed entirely based on their importance, which is either impossible or
  93 difficult to do with traditional methods. For example, only error messages, or
  94 only error messages and warnings might be logged, filtering out all
  95 informational messages.
  96 \item{\bf Completeness} Usually, an error message should be presented to the user
  97 when some operation fails. Let's take a quite simple but common case of a file
  98 error: suppose that you're writing your data file on disk and there is not
  99 enough space. The actual error might have been detected inside wxWidgets code
 100 (say, in {\it wxFile::Write}), so the calling function doesn't really know the
 101 exact reason of the failure, it only knows that the data file couldn't be
 102 written to the disk. However, as wxWidgets uses {\it wxLogError()} in this
 103 situation, the exact error code (and the corresponding error message) will be
 104 given to the user together with "high level" message about data file writing
 105 error.
 106 \end{itemize}
 107
 108 After having enumerated all the functions which are normally used to log the
 109 messages, and why would you want to use them we now describe how all this
 110 works.
 111
 112 wxWidgets has the notion of a {\it log target}: it is just a class deriving
 113 from \helpref{wxLog}{wxlog}. As such, it implements the virtual functions of
 114 the base class which are called when a message is logged. Only one log target
 115 is {\it active} at any moment, this is the one used by {\it wxLogXXX()}
 116 functions. The normal usage of a log object (i.e. object of a class derived
 117 from wxLog) is to install it as the active target with a call to {\it
 118 SetActiveTarget()} and it will be used automatically by all subsequent calls
 119 to {\it wxLogXXX()} functions.
 120
 121 To create a new log target class you only need to derive it from wxLog and
 122 implement one (or both) of {\it DoLog()} and {\it DoLogString()} in it. The
 123 second one is enough if you're happy with the standard wxLog message
 124 formatting (prepending "Error:" or "Warning:", timestamping \&c) but just want
 125 to send the messages somewhere else. The first one may be overridden to do
 126 whatever you want but you have to distinguish between the different message
 127 types yourself.
 128
 129 There are some predefined classes deriving from wxLog and which might be
 130 helpful to see how you can create a new log target class and, of course, may
 131 also be used without any change. There are:
 132
 133 \begin{itemize}\itemsep=0pt
 134 \item{\bf wxLogStderr} This class logs messages to a {\it FILE *}, using
 135 stderr by default as its name suggests.
 136 \item{\bf wxLogStream} This class has the same functionality as wxLogStderr,
 137 but uses {\it ostream} and cerr instead of {\it FILE *} and stderr.
 138 \item{\bf wxLogGui} This is the standard log target for wxWidgets
 139 applications (it is used by default if you don't do anything) and provides the
 140 most reasonable handling of all types of messages for given platform.
 141 \item{\bf wxLogWindow} This log target provides a "log console" which
 142 collects all messages generated by the application and also passes them to the
 143 previous active log target. The log window frame has a menu allowing user to
 144 clear the log, close it completely or save all messages to file.
 145 \item{\bf wxLogNull} The last log class is quite particular: it doesn't do
 146 anything. The objects of this class may be instantiated to (temporarily)
 147 suppress output of {\it wxLogXXX()} functions. As an example, trying to open a
 148 non-existing file will usually provoke an error message, but if for some
 149 reasons it is unwanted, just use this construction:
 150
 151 {\small%
 152 \begin{verbatim}
 153   wxFile file;
 154
 155   // wxFile.Open() normally complains if file can't be opened, we don't want it
 156   {
 157     wxLogNull logNo;
 158     if ( !file.Open("bar") )
 159       ... process error ourselves ...
 160   } // ~wxLogNull called, old log sink restored
 161
 162   wxLogMessage("..."); // ok
 163 \end{verbatim}
 164 }%
 165 \end{itemize}
 166
 167 The log targets can also be combined: for example you may wish to redirect the
 168 messages somewhere else (for example, to a log file) but also process them as
 169 normally. For this the \helpref{wxLogChain}{wxlogchain} and
 170 \helpref{wxLogPassThrough}{wxlogpassthrough} can be used.
 171