]>
git.saurik.com Git - wxWidgets.git/blob - src/zlib/infblock.c
   1 /* infblock.c -- interpret and process block types to last block 
   2  * Copyright (C) 1995-2002 Mark Adler 
   3  * For conditions of distribution and use, see copyright notice in zlib.h 
  12 struct inflate_codes_state 
{int dummy
;}; /* for buggy compilers */ 
  14 /* simplify the use of the inflate_huft type with some defines */ 
  15 #define exop word.what.Exop 
  16 #define bits word.what.Bits 
  18 /* Table for deflate from PKZIP's appnote.txt. */ 
  19 local 
const uInt border
[] = { /* Order of the bit length code lengths */ 
  20         16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; 
  23    Notes beyond the 1.93a appnote.txt: 
  25    1. Distance pointers never point before the beginning of the output 
  27    2. Distance pointers can point back across blocks, up to 32k away. 
  28    3. There is an implied maximum of 7 bits for the bit length table and 
  29       15 bits for the actual data. 
  30    4. If only one code exists, then it is encoded using one bit.  (Zero 
  31       would be more efficient, but perhaps a little confusing.)  If two 
  32       codes exist, they are coded using one bit each (0 and 1). 
  33    5. There is no way of sending zero distance codes--a dummy must be 
  34       sent if there are none.  (History: a pre 2.0 version of PKZIP would 
  35       store blocks with no distance codes, but this was discovered to be 
  36       too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow 
  37       zero distance codes, which is sent as one code of zero bits in 
  39    6. There are up to 286 literal/length codes.  Code 256 represents the 
  40       end-of-block.  Note however that the static length tree defines 
  41       288 codes just to fill out the Huffman codes.  Codes 286 and 287 
  42       cannot be used though, since there is no length base or extra bits 
  43       defined for them.  Similarily, there are up to 30 distance codes. 
  44       However, static trees define 32 codes (all 5 bits) to fill out the 
  45       Huffman codes, but the last two had better not show up in the data. 
  46    7. Unzip can check dynamic Huffman blocks for complete code sets. 
  47       The exception is that a single code would not be complete (see #4). 
  48    8. The five bits following the block type is really the number of 
  49       literal codes sent minus 257. 
  50    9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits 
  51       (1+6+6).  Therefore, to output three times the length, you output 
  52       three codes (1+1+1), whereas to output four times the same length, 
  53       you only need two codes (1+3).  Hmm. 
  54   10. In the tree reconstruction algorithm, Code = Code + Increment 
  55       only if BitLength(i) is not zero.  (Pretty obvious.) 
  56   11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19) 
  57   12. Note: length code 284 can represent 227-258, but length code 285 
  58       really is 258.  The last length deserves its own, short code 
  59       since it gets used a lot in very redundant files.  The length 
  60       258 is special since 258 - 3 (the min match length) is 255. 
  61   13. The literal/length and distance code bit lengths are read as a 
  62       single stream of lengths.  It is possible (and advantageous) for 
  63       a repeat code (16, 17, or 18) to go across the boundary between 
  64       the two sets of lengths. 
  68 #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ 
  69 void inflate_blocks_reset(inflate_blocks_statef
* s
, z_streamp z
, uLongf
* c
) 
  71 void inflate_blocks_reset(s
, z
, c
) 
  72 inflate_blocks_statef 
*s
; 
  79   if (s
->mode 
== BTREE 
|| s
->mode 
== DTREE
) 
  80     ZFREE(z
, s
->sub
.trees
.blens
); 
  82     inflate_codes_free(s
->sub
.decode
.codes
, z
); 
  86   s
->read 
= s
->write 
= s
->window
; 
  87   if (s
->checkfn 
!= Z_NULL
) 
  88     z
->adler 
= s
->check 
= (*s
->checkfn
)(0L, (const Bytef 
*)Z_NULL
, 0); 
  89   Tracev((stderr
, "inflate:   blocks reset\n")); 
  92 #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ 
  93 inflate_blocks_statef 
*inflate_blocks_new(z_streamp z
, check_func c
, uInt w
) 
  95 inflate_blocks_statef 
*inflate_blocks_new(z
, c
, w
) 
 101   inflate_blocks_statef 
*s
; 
 103   if ((s 
= (inflate_blocks_statef 
*)ZALLOC
 
 104        (z
,1,sizeof(struct inflate_blocks_state
))) == Z_NULL
) 
 107        (inflate_huft 
*)ZALLOC(z
, sizeof(inflate_huft
), MANY
)) == Z_NULL
) 
 112   if ((s
->window 
= (Bytef 
*)ZALLOC(z
, 1, w
)) == Z_NULL
) 
 118   s
->end 
= s
->window 
+ w
; 
 121   Tracev((stderr
, "inflate:   blocks allocated\n")); 
 122   inflate_blocks_reset(s
, z
, Z_NULL
); 
 126 #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ 
 127 int inflate_blocks(inflate_blocks_statef
* s
, z_streamp z
, int r
) 
 129 int inflate_blocks(s
, z
, r
) 
 130 inflate_blocks_statef 
*s
; 
 135   uInt t
;               /* temporary storage */ 
 136   uLong b
;              /* bit buffer */ 
 137   uInt k
;               /* bits in bit buffer */ 
 138   Bytef 
*p
;             /* input data pointer */ 
 139   uInt n
;               /* bytes available there */ 
 140   Bytef 
*q
;             /* output window write pointer */ 
 141   uInt m
;               /* bytes to end of window or read pointer */ 
 143   /* copy input/output information to locals (UPDATE macro restores) */ 
 146   /* process input based on current state */ 
 147   while (1) switch (s
->mode
) 
 156           Tracev((stderr
, "inflate:     stored block%s\n", 
 157                  s
->last 
? " (last)" : "")); 
 159           t 
= k 
& 7;                    /* go to byte boundary */ 
 161           s
->mode 
= LENS
;               /* get length of stored block */ 
 164           Tracev((stderr
, "inflate:     fixed codes block%s\n", 
 165                  s
->last 
? " (last)" : "")); 
 168             inflate_huft 
*tl
, *td
; 
 170             inflate_trees_fixed(&bl
, &bd
, &tl
, &td
, z
); 
 171             s
->sub
.decode
.codes 
= inflate_codes_new(bl
, bd
, tl
, td
, z
); 
 172             if (s
->sub
.decode
.codes 
== Z_NULL
) 
 181         case 2:                         /* dynamic */ 
 182           Tracev((stderr
, "inflate:     dynamic codes block%s\n", 
 183                  s
->last 
? " (last)" : "")); 
 187         case 3:                         /* illegal */ 
 190           z
->msg 
= (char*)"invalid block type"; 
 197       if ((((~b
) >> 16) & 0xffff) != (b 
& 0xffff)) 
 200         z
->msg 
= (char*)"invalid stored block lengths"; 
 204       s
->sub
.left 
= (uInt
)b 
& 0xffff; 
 205       b 
= k 
= 0;                      /* dump bits */ 
 206       Tracev((stderr
, "inflate:       stored length %u\n", s
->sub
.left
)); 
 207       s
->mode 
= s
->sub
.left 
? STORED 
: (s
->last 
? DRY 
: TYPE
); 
 219       if ((s
->sub
.left 
-= t
) != 0) 
 221       Tracev((stderr
, "inflate:       stored end, %lu total out\n", 
 222               z
->total_out 
+ (q 
>= s
->read 
? q 
- s
->read 
: 
 223               (s
->end 
- s
->read
) + (q 
- s
->window
)))); 
 224       s
->mode 
= s
->last 
? DRY 
: TYPE
; 
 228       s
->sub
.trees
.table 
= t 
= (uInt
)b 
& 0x3fff; 
 229 #ifndef PKZIP_BUG_WORKAROUND 
 230       if ((t 
& 0x1f) > 29 || ((t 
>> 5) & 0x1f) > 29) 
 233         z
->msg 
= (char*)"too many length or distance symbols"; 
 238       t 
= 258 + (t 
& 0x1f) + ((t 
>> 5) & 0x1f); 
 239       if ((s
->sub
.trees
.blens 
= (uIntf
*)ZALLOC(z
, t
, sizeof(uInt
))) == Z_NULL
) 
 245       s
->sub
.trees
.index 
= 0; 
 246       Tracev((stderr
, "inflate:       table sizes ok\n")); 
 249       while (s
->sub
.trees
.index 
< 4 + (s
->sub
.trees
.table 
>> 10)) 
 252         s
->sub
.trees
.blens
[border
[s
->sub
.trees
.index
++]] = (uInt
)b 
& 7; 
 255       while (s
->sub
.trees
.index 
< 19) 
 256         s
->sub
.trees
.blens
[border
[s
->sub
.trees
.index
++]] = 0; 
 258       t 
= inflate_trees_bits(s
->sub
.trees
.blens
, &s
->sub
.trees
.bb
, 
 259                              &s
->sub
.trees
.tb
, s
->hufts
, z
); 
 263         if (r 
== Z_DATA_ERROR
) 
 265           ZFREE(z
, s
->sub
.trees
.blens
); 
 270       s
->sub
.trees
.index 
= 0; 
 271       Tracev((stderr
, "inflate:       bits tree ok\n")); 
 274       while (t 
= s
->sub
.trees
.table
, 
 275              s
->sub
.trees
.index 
< 258 + (t 
& 0x1f) + ((t 
>> 5) & 0x1f)) 
 282         h 
= s
->sub
.trees
.tb 
+ ((uInt
)b 
& inflate_mask
[t
]); 
 288           s
->sub
.trees
.blens
[s
->sub
.trees
.index
++] = c
; 
 290         else /* c == 16..18 */ 
 292           i 
= c 
== 18 ? 7 : c 
- 14; 
 293           j 
= c 
== 18 ? 11 : 3; 
 296           j 
+= (uInt
)b 
& inflate_mask
[i
]; 
 298           i 
= s
->sub
.trees
.index
; 
 299           t 
= s
->sub
.trees
.table
; 
 300           if (i 
+ j 
> 258 + (t 
& 0x1f) + ((t 
>> 5) & 0x1f) || 
 303             ZFREE(z
, s
->sub
.trees
.blens
); 
 305             z
->msg 
= (char*)"invalid bit length repeat"; 
 309           c 
= c 
== 16 ? s
->sub
.trees
.blens
[i 
- 1] : 0; 
 311             s
->sub
.trees
.blens
[i
++] = c
; 
 313           s
->sub
.trees
.index 
= i
; 
 316       s
->sub
.trees
.tb 
= Z_NULL
; 
 319         inflate_huft 
*tl
, *td
; 
 320         inflate_codes_statef 
*c
; 
 322         bl 
= 9;         /* must be <= 9 for lookahead assumptions */ 
 323         bd 
= 6;         /* must be <= 9 for lookahead assumptions */ 
 324         t 
= s
->sub
.trees
.table
; 
 325         t 
= inflate_trees_dynamic(257 + (t 
& 0x1f), 1 + ((t 
>> 5) & 0x1f), 
 326                                   s
->sub
.trees
.blens
, &bl
, &bd
, &tl
, &td
, 
 330           if (t 
== (uInt
)Z_DATA_ERROR
) 
 332             ZFREE(z
, s
->sub
.trees
.blens
); 
 338         Tracev((stderr
, "inflate:       trees ok\n")); 
 339         if ((c 
= inflate_codes_new(bl
, bd
, tl
, td
, z
)) == Z_NULL
) 
 344         s
->sub
.decode
.codes 
= c
; 
 346       ZFREE(z
, s
->sub
.trees
.blens
); 
 350       if ((r 
= inflate_codes(s
, z
, r
)) != Z_STREAM_END
) 
 351         return inflate_flush(s
, z
, r
); 
 353       inflate_codes_free(s
->sub
.decode
.codes
, z
); 
 355       Tracev((stderr
, "inflate:       codes end, %lu total out\n", 
 356               z
->total_out 
+ (q 
>= s
->read 
? q 
- s
->read 
: 
 357               (s
->end 
- s
->read
) + (q 
- s
->window
)))); 
 366       if (s
->read 
!= s
->write
) 
 381 #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ 
 382 int inflate_blocks_free(inflate_blocks_statef
* s
, z_streamp z
) 
 384 int inflate_blocks_free(s
, z
) 
 385 inflate_blocks_statef 
*s
; 
 389   inflate_blocks_reset(s
, z
, Z_NULL
); 
 393   Tracev((stderr
, "inflate:   blocks freed\n")); 
 397 #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ 
 398 void inflate_set_dictionary(inflate_blocks_statef
* s
, const Bytef
* d
, uInt n
) 
 400 void inflate_set_dictionary(s
, d
, n
) 
 401 inflate_blocks_statef 
*s
; 
 406   zmemcpy(s
->window
, d
, n
); 
 407   s
->read 
= s
->write 
= s
->window 
+ n
; 
 410 /* Returns true if inflate is currently at the end of a block generated 
 411  * by Z_SYNC_FLUSH or Z_FULL_FLUSH. 
 412  * IN assertion: s != Z_NULL 
 414 #if defined(__VISAGECPP__) /* Visualage can't handle this antiquated interface */ 
 415 int inflate_blocks_sync_point(inflate_blocks_statef
* s
) 
 417 int inflate_blocks_sync_point(s
) 
 418 inflate_blocks_statef 
*s
; 
 421   return s
->mode 
== LENS
;