docs/latex/wx/strmzlib.tex

   1 % -----------------------------------------------------------------------------
   2 % wxZlibInputStream
   3 % -----------------------------------------------------------------------------
   4 \section{\class{wxZlibInputStream}}\label{wxzlibinputstream}
   5
   6 This filter stream decompresses a stream that is in zlib or gzip format.
   7 Note that reading the gzip format requires zlib version 1.2.1 or greater,
   8 (the builtin version does support gzips).
   9
  10 The stream is not seekable, \helpref{SeekI()}{wxinputstreamseeki} returns
  11  {\it wxInvalidOffset}. Also \helpref{GetSize()}{wxstreambasegetsize} is
  12 not supported, it always returns $0$.
  13
  14 \wxheading{Derived from}
  15
  16 \helpref{wxFilterInputStream}{wxfilterinputstream}
  17
  18 \wxheading{Include files}
  19
  20 <wx/zstream.h>
  21
  22 \wxheading{See also}
  23
  24 \helpref{wxInputStream}{wxinputstream},
  25  \helpref{wxZlibOutputStream}{wxzliboutputstream}.
  26
  27 \latexignore{\rtfignore{\wxheading{Members}}}
  28
  29 \membersection{wxZlibInputStream::wxZlibInputStream}
  30
  31 \func{}{wxZlibInputStream}{\param{wxInputStream\&}{ stream}, \param{int}{ flags = wxZLIB\_AUTO}}
  32
  33 The {\it flags} wxZLIB\_ZLIB and wxZLIB\_GZIP specify whether the input data
  34 is in zlib or gzip format. If wxZLIB\_AUTO is used, then zlib will
  35 autodetect the stream type, this is the default.
  36
  37 If {\it flags} is wxZLIB\_NO\_HEADER, then the data is assumed to be a raw
  38 deflate stream without either zlib or gzip headers. This is a lower level
  39 mode, which is not usually used directly. It can be used to read a raw
  40 deflate stream embedded in a higher level protocol.
  41
  42 %if WXWIN_COMPATIBILITY_2_4
  43 This version is not by default compatible with the output produced by
  44 the version of {\it wxZlibOutputStream} in wxWidgets 2.4.x. However,
  45 there is a compatibilty mode, which is switched on by passing
  46 wxZLIB\_24COMPATIBLE for flags. Note that in when operating in compatibilty
  47 mode error checking is very much reduced.
  48 %endif
  49
  50 The following symbols can be use for the flags:
  51
  52 \begin{verbatim}
  53 // Flags
  54 enum {
  55 #if WXWIN_COMPATIBILITY_2_4
  56     wxZLIB_24COMPATIBLE = 4, // read v2.4.x data without error
  57 #endif
  58     wxZLIB_NO_HEADER = 0,    // raw deflate stream, no header or checksum
  59     wxZLIB_ZLIB = 1,         // zlib header and checksum
  60     wxZLIB_GZIP = 2,         // gzip header and checksum, requires zlib 1.2.1+
  61     wxZLIB_AUTO = 3          // autodetect header zlib or gzip
  62 };
  63 \end{verbatim}
  64
  65 \membersection{wxZlibInputStream::CanHandleGZip}\label{wxzlibinputstreamcanhandlegzip}
  66
  67 \func{static bool}{CanHandleGZip}{\void}
  68
  69 Returns true if zlib library in use can handle gzip compressed data.
  70
  71 % -----------------------------------------------------------------------------
  72 % wxZlibOutputStream
  73 % -----------------------------------------------------------------------------
  74 \section{\class{wxZlibOutputStream}}\label{wxzliboutputstream}
  75
  76 This stream compresses all data written to it. The compressed output can be
  77 in zlib or gzip format.
  78 Note that writing the gzip format requires zlib version 1.2.1 or greater
  79 (the builtin version does support gzips).
  80
  81 The stream is not seekable, \helpref{SeekO()}{wxoutputstreamseeko} returns
  82  {\it wxInvalidOffset}.
  83
  84 \wxheading{Derived from}
  85
  86 \helpref{wxFilterOutputStream}{wxfilteroutputstream}
  87
  88 \wxheading{Include files}
  89
  90 <wx/zstream.h>
  91
  92 \wxheading{See also}
  93
  94 \helpref{wxOutputStream}{wxoutputstream},
  95  \helpref{wxZlibInputStream}{wxzlibinputstream}
  96
  97
  98 \latexignore{\rtfignore{\wxheading{Members}}}
  99
 100 \membersection{wxZlibOutputStream::wxZlibOutputStream}
 101
 102 \func{}{wxZlibOutputStream}{\param{wxOutputStream\&}{ stream}, \param{int}{ level = -1}, \param{int}{ flags = wxZLIB\_ZLIB}}
 103
 104 Creates a new write-only compressed stream. {\it level} means level of
 105 compression. It is number between 0 and 9 (including these values) where
 106 0 means no compression and 9 best but slowest compression. -1 is default
 107 value (currently equivalent to 6).
 108
 109 The {\it flags} wxZLIB\_ZLIB and wxZLIB\_GZIP specify whether the output data
 110 will be in zlib or gzip format. wxZLIB\_ZLIB is the default.
 111
 112 If {\it flags} is wxZLIB\_NO\_HEADER, then a raw deflate stream is output
 113 without either zlib or gzip headers. This is a lower level
 114 mode, which is not usually used directly. It can be used to embed a raw
 115 deflate stream in a higher level protocol.
 116
 117 The following symbols can be use for the compression level and flags:
 118
 119 \begin{verbatim}
 120 // Compression level
 121 enum {
 122     wxZ_DEFAULT_COMPRESSION = -1,
 123     wxZ_NO_COMPRESSION = 0,
 124     wxZ_BEST_SPEED = 1,
 125     wxZ_BEST_COMPRESSION = 9
 126 };
 127
 128 // Flags
 129 enum {
 130     wxZLIB_NO_HEADER = 0,   // raw deflate stream, no header or checksum
 131     wxZLIB_ZLIB = 1,        // zlib header and checksum
 132     wxZLIB_GZIP = 2         // gzip header and checksum, requires zlib 1.2.1+
 133 };
 134 \end{verbatim}
 135
 136 \membersection{wxZlibOutputStream::CanHandleGZip}\label{wxoutputstreamcanhandlegzip}
 137
 138 \func{static bool}{CanHandleGZip}{\void}
 139
 140 Returns true if zlib library in use can handle gzip compressed data.
 141