]> git.saurik.com Git - wxWidgets.git/blob - docs/latex/wx/keyevent.tex
added/documented wxApp::FilterEvent
[wxWidgets.git] / docs / latex / wx / keyevent.tex
1 \section{\class{wxKeyEvent}}\label{wxkeyevent}
2
3 This event class contains information about keypress (character) events.
4
5 Notice that there are three different kinds of keyboard events in wxWindows:
6 key down and up events and char events. The difference between the first two
7 is clear - the first corresponds to a key press and the second to a key
8 release - otherwise they are identical. Just note that if the key is
9 maintained in a pressed state you will typically get a lot of (automatically
10 generated) down events but only one up so it is wrong to assume that there is
11 one up event corresponding to each down one.
12
13 Both key events provide untranslated key codes while the char event carries
14 the translated one. The untranslated code for alphanumeric keys is always
15 an upper case value. For the other keys it is one of {\tt WXK\_XXX} values
16 from the \helpref{keycodes table}{keycodes}. The translated key is, in
17 general, the character the user expects to appear as the result of the key
18 combination when typing the text into a text entry zone, for example.
19
20 If the key up event is caught and the event handler does not call
21 event.Skip() then the coresponding char event will not happen. This
22 is by design and enables the programs that handle both types of events
23 to be a bit simpler.
24
25 A few examples to clarify this (all assume that {\sc Caps Lock} is unpressed
26 and the standard US keyboard): when the {\tt 'A'} key is pressed, the key down
27 event key code is equal to {\tt ASCII A} $== 65$. But the char event key code
28 is {\tt ASCII a} $== 97$. On the other hand, if you press both {\sc Shift} and
29 {\tt 'A'} keys simultaneously , the key code in key down event will still be
30 just {\tt 'A'} while the char event key code parameter will now be {\tt 'A'}
31 as well.
32
33 Although in this simple case it is clear that the correct key code could be
34 found in the key down event handler by checking the value returned by
35 \helpref{ShiftDown()}{wxkeyeventshiftdown}, in general you should use
36 {\tt EVT\_CHAR} for this as for non alphanumeric keys the translation is
37 keyboard-layout dependent and can only be done properly by the system itself.
38
39 Another kind of translation is done when the control key is pressed: for
40 example, for {\sc Ctrl-A} key press the key down event still carries the
41 same key code {\tt 'a'} as usual but the char event will have key code of
42 $1$, the ASCII value of this key combination.
43
44 You may discover how the other keys on your system behave interactively by
45 running the \helpref{text}{sampletext} wxWindows sample and pressing some keys
46 in any of the text controls shown in it.
47
48 {\bf Note for Windows programmers:} The key and char events in wxWindows are
49 similar to but slightly different from Windows {\tt WM\_KEYDOWN} and
50 {\tt WM\_CHAR} events. In particular, Alt-x combination will generate a char
51 event in wxWindows (unless it is used as an acclerator).
52
53 {\bf Tip:} be sure to call {\tt event.Skip()} for events that you don't process in
54 key event function, otherwise menu shortcuts may cease to work under Windows.
55
56 \wxheading{Derived from}
57
58 \helpref{wxEvent}{wxevent}
59
60 \wxheading{Include files}
61
62 <wx/event.h>
63
64 \wxheading{Event table macros}
65
66 To process a key event, use these event handler macros to direct input to member
67 functions that take a wxKeyEvent argument.
68
69 \twocolwidtha{7cm}
70 \begin{twocollist}\itemsep=0pt
71 \twocolitem{{\bf EVT\_KEY\_DOWN(func)}}{Process a wxEVT\_KEY\_DOWN event (any key has been pressed).}
72 \twocolitem{{\bf EVT\_KEY\_UP(func)}}{Process a wxEVT\_KEY\_UP event (any key has been released).}
73 \twocolitem{{\bf EVT\_CHAR(func)}}{Process a wxEVT\_CHAR event.}
74 %\twocolitem{{\bf EVT\_CHAR\_HOOK(func)}}{Process a wxEVT\_CHAR\_HOOK event.}
75 \end{twocollist}%
76
77
78 \latexignore{\rtfignore{\wxheading{Members}}}
79
80 \membersection{wxKeyEvent::m\_altDown}
81
82 \member{bool}{m\_altDown}
83
84 TRUE if the Alt key is pressed down.
85
86 \membersection{wxKeyEvent::m\_controlDown}
87
88 \member{bool}{m\_controlDown}
89
90 TRUE if control is pressed down.
91
92 \membersection{wxKeyEvent::m\_keyCode}
93
94 \member{long}{m\_keyCode}
95
96 Virtual keycode. See \helpref{Keycodes}{keycodes} for a list of identifiers.
97
98 \membersection{wxKeyEvent::m\_metaDown}
99
100 \member{bool}{m\_metaDown}
101
102 TRUE if the Meta key is pressed down.
103
104 \membersection{wxKeyEvent::m\_shiftDown}
105
106 \member{bool}{m\_shiftDown}
107
108 TRUE if shift is pressed down.
109
110 \membersection{wxKeyEvent::m\_x}
111
112 \member{int}{m\_x}
113
114 X position of the event.
115
116 \membersection{wxKeyEvent::m\_y}
117
118 \member{int}{m\_y}
119
120 Y position of the event.
121
122 \membersection{wxKeyEvent::wxKeyEvent}
123
124 \func{}{wxKeyEvent}{\param{WXTYPE}{ keyEventType}}
125
126 Constructor. Currently, the only valid event types are wxEVT\_CHAR and wxEVT\_CHAR\_HOOK.
127
128 \membersection{wxKeyEvent::AltDown}
129
130 \constfunc{bool}{AltDown}{\void}
131
132 Returns TRUE if the Alt key was down at the time of the key event.
133
134 \membersection{wxKeyEvent::ControlDown}
135
136 \constfunc{bool}{ControlDown}{\void}
137
138 Returns TRUE if the control key was down at the time of the key event.
139
140 \membersection{wxKeyEvent::GetKeyCode}
141
142 \constfunc{int}{GetKeyCode}{\void}
143
144 Returns the virtual key code. ASCII events return normal ASCII values,
145 while non-ASCII events return values such as {\bf WXK\_LEFT} for the
146 left cursor key. See \helpref{Keycodes}{keycodes} for a full list of the virtual key codes.
147
148 \membersection{wxKeyEvent::GetRawKeyCode}
149
150 \constfunc{wxUint32}{GetRawKeyCode}{\void}
151
152 Returns the raw key code for this event. This is a platform-dependent scan code
153 which should only be used in advanced applications.
154
155 {\bf NB:} Currently the raw key codes are not supported by all ports, use
156 {\tt\#ifdef wxHAS\_RAW\_KEY\_CODES} to determine if this feature is available.
157
158 \membersection{wxKeyEvent::GetRawKeyFlags}
159
160 \constfunc{wxUint32}{GetRawKeyFlags}{\void}
161
162 Returns the low level key flags for this event. The flags are
163 platform-dependent and should only be used in advanced applications.
164
165 {\bf NB:} Currently the raw key flags are not supported by all ports, use
166 {\tt \#ifdef wxHAS\_RAW\_KEY\_CODES} to determine if this feature is available.
167
168 \membersection{wxKeyEvent::GetX}
169
170 \constfunc{long}{GetX}{\void}
171
172 Returns the X position of the event.
173
174 \membersection{wxKeyEvent::GetY}
175
176 \constfunc{long}{GetY}{\void}
177
178 Returns the Y position of the event.
179
180 \membersection{wxKeyEvent::MetaDown}
181
182 \constfunc{bool}{MetaDown}{\void}
183
184 Returns TRUE if the Meta key was down at the time of the key event.
185
186 \membersection{wxKeyEvent::GetPosition}
187
188 \constfunc{wxPoint}{GetPosition}{\void}
189
190 \constfunc{void}{GetPosition}{\param{long *}{x}, \param{long *}{y}}
191
192 Obtains the position at which the key was pressed.
193
194 \membersection{wxKeyEvent::HasModifiers}
195
196 \constfunc{bool}{HasModifiers}{\void}
197
198 Returns TRUE if either {\sc Ctrl} or {\sc Alt} keys was down
199 at the time of the key event. Note that this function does not take into
200 account neither {\sc Shift} nor {\sc Meta} key states (the reason for ignoring
201 the latter is that it is common for {\sc NumLock} key to be configured as
202 {\sc Meta} under X but the key presses even while {\sc NumLock} is on should
203 be still processed normally).
204
205 \membersection{wxKeyEvent::ShiftDown}\label{wxkeyeventshiftdown}
206
207 \constfunc{bool}{ShiftDown}{\void}
208
209 Returns TRUE if the shift key was down at the time of the key event.
210