utils/wxPython/src/Makefile.pre.in

   1 # Universal Unix Makefile for Python extensions
   2 # =============================================
   3
   4 # Short Instructions
   5 # ------------------
   6
   7 # 1. Build and install Python (1.5 or newer).
   8 # 2. "make -f Makefile.pre.in boot"
   9 # 3. "make"
  10 # You should now have a shared library.
  11
  12 # Long Instructions
  13 # -----------------
  14
  15 # Build *and install* the basic Python 1.5 distribution.  See the
  16 # Python README for instructions.  (This version of Makefile.pre.in
  17 # only withs with Python 1.5, alpha 3 or newer.)
  18
  19 # Create a file Setup.in for your extension.  This file follows the
  20 # format of the Modules/Setup.in file; see the instructions there.
  21 # For a simple module called "spam" on file "spammodule.c", it can
  22 # contain a single line:
  23 #   spam spammodule.c
  24 # You can build as many modules as you want in the same directory --
  25 # just have a separate line for each of them in the Setup.in file.
  26
  27 # If you want to build your extension as a shared library, insert a
  28 # line containing just the string
  29 #   *shared*
  30 # at the top of your Setup.in file.
  31
  32 # Note that the build process copies Setup.in to Setup, and then works
  33 # with Setup.  It doesn't overwrite Setup when Setup.in is changed, so
  34 # while you're in the process of debugging your Setup.in file, you may
  35 # want to edit Setup instead, and copy it back to Setup.in later.
  36 # (All this is done so you can distribute your extension easily and
  37 # someone else can select the modules they actually want to build by
  38 # commenting out lines in the Setup file, without editing the
  39 # original.  Editing Setup is also used to specify nonstandard
  40 # locations for include or library files.)
  41
  42 # Copy this file (Misc/Makefile.pre.in) to the directory containing
  43 # your extension.
  44
  45 # Run "make -f Makefile.pre.in boot".  This creates Makefile
  46 # (producing Makefile.pre and sedscript as intermediate files) and
  47 # config.c, incorporating the values for sys.prefix, sys.exec_prefix
  48 # and sys.version from the installed Python binary.  For this to work,
  49 # the python binary must be on your path.  If this fails, try
  50 #   make -f Makefile.pre.in Makefile VERSION=1.5 installdir=<prefix>
  51 # where <prefix> is the prefix used to install Python for installdir
  52 # (and possibly similar for exec_installdir=<exec_prefix>).
  53
  54 # Note: "make boot" implies "make clobber" -- it assumes that when you
  55 # bootstrap you may have changed platforms so it removes all previous
  56 # output files.
  57
  58 # If you are building your extension as a shared library (your
  59 # Setup.in file starts with *shared*), run "make" or "make sharedmods"
  60 # to build the shared library files.  If you are building a statically
  61 # linked Python binary (the only solution of your platform doesn't
  62 # support shared libraries, and sometimes handy if you want to
  63 # distribute or install the resulting Python binary), run "make
  64 # python".
  65
  66 # Note: Each time you edit Makefile.pre.in or Setup, you must run
  67 # "make Makefile" before running "make".
  68
  69 # Hint: if you want to use VPATH, you can start in an empty
  70 # subdirectory and say (e.g.):
  71 #   make -f ../Makefile.pre.in boot srcdir=.. VPATH=..
  72
  73
  74 # === Bootstrap variables (edited through "make boot") ===
  75
  76 # The prefix used by "make inclinstall libainstall" of core python
  77 installdir=     /usr/local
  78
  79 # The exec_prefix used by the same
  80 exec_installdir=$(installdir)
  81
  82 # Source directory and VPATH in case you want to use VPATH.
  83 # (You will have to edit these two lines yourself -- there is no
  84 # automatic support as the Makefile is not generated by
  85 # config.status.)
  86 srcdir=         .
  87 VPATH=          .
  88
  89 # === Variables that you may want to customize (rarely) ===
  90
  91 # (Static) build target
  92 TARGET=         python
  93
  94 # Installed python binary (used only by boot target)
  95 PYTHON=         python
  96
  97 # Add more -I and -D options here
  98 CFLAGS=         $(OPT) -I$(INCLUDEPY) -I$(EXECINCLUDEPY) $(DEFS)
  99
 100 # These two variables can be set in Setup to merge extensions.
 101 # See example[23].
 102 BASELIB=
 103 BASESETUP=
 104
 105 # === Variables set by makesetup ===
 106
 107 MODOBJS=        _MODOBJS_
 108 MODLIBS=        _MODLIBS_
 109
 110 # === Definitions added by makesetup ===
 111
 112 # === Variables from configure (through sedscript) ===
 113
 114 VERSION=        @VERSION@
 115 CC=             @CC@
 116 LINKCC=         @LINKCC@
 117 SGI_ABI=        @SGI_ABI@
 118 OPT=            @OPT@
 119 LDFLAGS=        @LDFLAGS@
 120 LDLAST=         @LDLAST@
 121 DEFS=           @DEFS@
 122 LIBS=           @LIBS@
 123 LIBM=           @LIBM@
 124 LIBC=           @LIBC@
 125 RANLIB=         @RANLIB@
 126 MACHDEP=        @MACHDEP@
 127 SO=             @SO@
 128 LDSHARED=       @LDSHARED@
 129 CCSHARED=       @CCSHARED@
 130 LINKFORSHARED=  @LINKFORSHARED@
 131 #@SET_CCC@
 132
 133 # Install prefix for architecture-independent files
 134 prefix=         /usr/local
 135
 136 # Install prefix for architecture-dependent files
 137 exec_prefix=    $(prefix)
 138
 139 # === Fixed definitions ===
 140
 141 # Shell used by make (some versions default to the login shell, which is bad)
 142 SHELL=          /bin/sh
 143
 144 # Expanded directories
 145 BINDIR=         $(exec_installdir)/bin
 146 LIBDIR=         $(exec_prefix)/lib
 147 MANDIR=         $(installdir)/man
 148 INCLUDEDIR=     $(installdir)/include
 149 SCRIPTDIR=      $(prefix)/lib
 150
 151 # Detailed destination directories
 152 BINLIBDEST=     $(LIBDIR)/python$(VERSION)
 153 LIBDEST=        $(SCRIPTDIR)/python$(VERSION)
 154 INCLUDEPY=      $(INCLUDEDIR)/python$(VERSION)
 155 EXECINCLUDEPY=  $(exec_installdir)/include/python$(VERSION)
 156 LIBP=           $(exec_installdir)/lib/python$(VERSION)
 157 DESTSHARED=     $(BINLIBDEST)/site-packages
 158
 159 LIBPL=          $(LIBP)/config
 160
 161 PYTHONLIBS=     $(LIBPL)/libpython$(VERSION).a
 162
 163 MAKESETUP=      $(LIBPL)/makesetup
 164 MAKEFILE=       $(LIBPL)/Makefile
 165 CONFIGC=        $(LIBPL)/config.c
 166 CONFIGCIN=      $(LIBPL)/config.c.in
 167 SETUP=          $(LIBPL)/Setup
 168
 169 SYSLIBS=        $(LIBM) $(LIBC)
 170
 171 ADDOBJS=        $(LIBPL)/python.o config.o
 172
 173 # Portable install script (configure doesn't always guess right)
 174 INSTALL=        $(LIBPL)/install-sh -c
 175 # Shared libraries must be installed with executable mode on some systems;
 176 # rather than figuring out exactly which, we always give them executable mode.
 177 # Also, making them read-only seems to be a good idea...
 178 INSTALL_SHARED= ${INSTALL} -m 555
 179
 180 # === Fixed rules ===
 181
 182 # Default target.  This builds shared libraries only
 183 default:        sharedmods
 184
 185 # Build everything
 186 all:            static sharedmods
 187
 188 # Build shared libraries from our extension modules
 189 sharedmods:     $(SHAREDMODS)
 190
 191 # Build a static Python binary containing our extension modules
 192 static:         $(TARGET)
 193 $(TARGET):      $(ADDOBJS) lib.a $(PYTHONLIBS) Makefile $(BASELIB)
 194                 $(LINKCC) $(LDFLAGS) $(LINKFORSHARED) \
 195                  $(ADDOBJS) lib.a $(PYTHONLIBS) \
 196                  $(LINKPATH) $(BASELIB) $(MODLIBS) $(LIBS) $(SYSLIBS) \
 197                  -o $(TARGET) $(LDLAST)
 198
 199 #------------------------------------------------------------------------
 200 #------------------------------------------------------------------------
 201 # This is a defaul version of the install target for wxPython.  It just
 202 # redirects to wxInstall below...
 203
 204 install:        wxInstall
 205
 206 #install:       sharedmods
 207 #               if test ! -d $(DESTSHARED) ; then \
 208 #                       mkdir $(DESTSHARED) ; else true ; fi
 209 #               -for i in X $(SHAREDMODS); do \
 210 #                       if test $$i != X; \
 211 #                       then $(INSTALL_SHARED) $$i $(DESTSHARED)/$$i; \
 212 #                       fi; \
 213 #               done
 214
 215
 216 # Build the library containing our extension modules
 217 lib.a:          $(MODOBJS)
 218                 -rm -f lib.a
 219                 ar cr lib.a $(MODOBJS)
 220                 -$(RANLIB) lib.a
 221
 222 # This runs makesetup *twice* to use the BASESETUP definition from Setup
 223 config.c Makefile:      Makefile.pre Setup $(BASESETUP) $(MAKESETUP)
 224                 $(MAKESETUP) \
 225                  -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
 226                 $(MAKE) -f Makefile do-it-again
 227
 228 # Internal target to run makesetup for the second time
 229 do-it-again:
 230                 $(MAKESETUP) \
 231                  -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
 232
 233 # Make config.o from the config.c created by makesetup
 234 config.o:       config.c
 235                 $(CC) $(CFLAGS) -c config.c
 236
 237 # Setup is copied from Setup.in *only* if it doesn't yet exist
 238 Setup:
 239                 cp $(srcdir)/Setup.in Setup
 240
 241 # Make the intermediate Makefile.pre from Makefile.pre.in
 242 Makefile.pre: Makefile.pre.in sedscript
 243                 sed -f sedscript $(srcdir)/Makefile.pre.in >Makefile.pre
 244
 245 # Shortcuts to make the sed arguments on one line
 246 P=prefix
 247 E=exec_prefix
 248 H=Generated automatically from Makefile.pre.in by sedscript.
 249 L=LINKFORSHARED
 250
 251 # Make the sed script used to create Makefile.pre from Makefile.pre.in
 252 sedscript:      $(MAKEFILE)
 253         sed -n \
 254          -e '1s/.*/1i\\/p' \
 255          -e '2s%.*%# $H%p' \
 256          -e '/^VERSION=/s/^VERSION=[    ]*\(.*\)/s%@VERSION[@]%\1%/p' \
 257          -e '/^CC=/s/^CC=[      ]*\(.*\)/s%@CC[@]%\1%/p' \
 258          -e '/^CCC=/s/^CCC=[    ]*\(.*\)/s%#@SET_CCC[@]%CCC=\1%/p' \
 259          -e '/^LINKCC=/s/^LINKCC=[      ]*\(.*\)/s%@LINKCC[@]%\1%/p' \
 260          -e '/^OPT=/s/^OPT=[    ]*\(.*\)/s%@OPT[@]%\1%/p' \
 261          -e '/^LDFLAGS=/s/^LDFLAGS=[    ]*\(.*\)/s%@LDFLAGS[@]%\1%/p' \
 262          -e '/^DEFS=/s/^DEFS=[  ]*\(.*\)/s%@DEFS[@]%\1%/p' \
 263          -e '/^LIBS=/s/^LIBS=[  ]*\(.*\)/s%@LIBS[@]%\1%/p' \
 264          -e '/^LIBM=/s/^LIBM=[  ]*\(.*\)/s%@LIBM[@]%\1%/p' \
 265          -e '/^LIBC=/s/^LIBC=[  ]*\(.*\)/s%@LIBC[@]%\1%/p' \
 266          -e '/^RANLIB=/s/^RANLIB=[      ]*\(.*\)/s%@RANLIB[@]%\1%/p' \
 267          -e '/^MACHDEP=/s/^MACHDEP=[    ]*\(.*\)/s%@MACHDEP[@]%\1%/p' \
 268          -e '/^SO=/s/^SO=[      ]*\(.*\)/s%@SO[@]%\1%/p' \
 269          -e '/^LDSHARED=/s/^LDSHARED=[  ]*\(.*\)/s%@LDSHARED[@]%\1%/p' \
 270          -e '/^CCSHARED=/s/^CCSHARED=[  ]*\(.*\)/s%@CCSHARED[@]%\1%/p' \
 271          -e '/^$L=/s/^$L=[      ]*\(.*\)/s%@$L[@]%\1%/p' \
 272          -e '/^$P=/s/^$P=\(.*\)/s%^$P=.*%$P=\1%/p' \
 273          -e '/^$E=/s/^$E=\(.*\)/s%^$E=.*%$E=\1%/p' \
 274          $(MAKEFILE) >sedscript
 275         echo "/^#@SET_CCC@/d" >>sedscript
 276         echo "/^installdir=/s%=.*%=     $(installdir)%" >>sedscript
 277         echo "/^exec_installdir=/s%=.*%=$(exec_installdir)%" >>sedscript
 278         echo "/^srcdir=/s%=.*%=         $(srcdir)%" >>sedscript
 279         echo "/^VPATH=/s%=.*%=          $(VPATH)%" >>sedscript
 280         echo "/^LINKPATH=/s%=.*%=       $(LINKPATH)%" >>sedscript
 281         echo "/^BASELIB=/s%=.*%=        $(BASELIB)%" >>sedscript
 282         echo "/^BASESETUP=/s%=.*%=      $(BASESETUP)%" >>sedscript
 283
 284 # Bootstrap target
 285 boot:   clobber
 286         VERSION=`$(PYTHON) -c "import sys; print sys.version[:3]"`; \
 287         installdir=`$(PYTHON) -c "import sys; print sys.prefix"`; \
 288         exec_installdir=`$(PYTHON) -c "import sys; print sys.exec_prefix"`; \
 289         $(MAKE) -f $(srcdir)/Makefile.pre.in VPATH=$(VPATH) srcdir=$(srcdir) \
 290                 VERSION=$$VERSION \
 291                 installdir=$$installdir \
 292                 exec_installdir=$$exec_installdir \
 293                 Makefile
 294
 295 # Handy target to remove intermediate files and backups
 296 clean:
 297                 -rm -f *.o *~
 298
 299 # Handy target to remove everything that is easily regenerated
 300 clobber:        clean
 301                 -rm -f *.a tags TAGS config.c Makefile.pre $(TARGET) sedscript
 302                 -rm -f *.so *.sl so_locations
 303
 304
 305 # Handy target to remove everything you don't want to distribute
 306 distclean:      clobber
 307                 -rm -f Makefile Setup
 308
 309
 310
 311
 312 #------------------------------------------------------------------------
 313 #------------------------------------------------------------------------
 314 # Custom rules and dependencies added for wxPython
 315 #
 316
 317 SWIGFLAGS=-c++ -shadow -python -dnone -D__WXGTK__
 318
 319 ifndef FINAL
 320 PYEXT=pyc
 321 PYTHON=python
 322 else
 323 PYEXT=pyo
 324 PYTHON=python -O
 325 endif
 326
 327 PYMODULES = wxp.py       events.py    windows.py   misc.py      \
 328             gdi.py       mdi.py       controls.py  controls2.py \
 329             windows2.py  cmndlgs.py   __init__.py
 330
 331
 332
 333 # Implicit rules to run SWIG
 334 %.cpp : %.i
 335         swig $(SWIGFLAGS) -c -o $*.cpp $*.i
 336
 337 $(TARGETDIR)/%.py : %.py
 338         cp $< $@
 339
 340 $(TARGETDIR)/%.$(PYEXT) : %.py
 341         $(PYTHON) -c "import py_compile; py_compile.compile('$<', '$@')"
 342
 343 %.py : %.i
 344         swig $(SWIGFLAGS) -c -o $*.cpp $*.i
 345
 346
 347 # This one must leave out the -c flag so we define the whole rule
 348 wxp.cpp wxp.py : wxp.i my_typemaps.i _defs.i _extras.py
 349         swig $(SWIGFLAGS) -o wxp.cpp wxp.i
 350
 351
 352 # define some dependencies
 353 windows.cpp   windows.py   : windows.i    my_typemaps.i _defs.i
 354 windows2.cpp  windows2.py  : windows2.i   my_typemaps.i _defs.i
 355 events.cpp    events.py    : events.i     my_typemaps.i _defs.i
 356 misc.cpp      misc.py      : misc.i       my_typemaps.i _defs.i
 357 gdi.cpp       gdi.py       : gdi.i        my_typemaps.i _defs.i
 358 mdi.cpp       mdi.py       : mdi.i        my_typemaps.i _defs.i
 359 controls.cpp  controls.py  : controls.i   my_typemaps.i _defs.i
 360 controls2.cpp controls2.py : controls2.i  my_typemaps.i _defs.i
 361 cmndlgs.cpp   cmndlgs.py   : cmndlgs.i    my_typemaps.i _defs.i
 362
 363
 364
 365 wxInstall :     sharedmods $(PYMODULES)
 366         if test ! -d $(TARGETDIR) ; then \
 367                 mkdir $(TARGETDIR) ; else true ; fi
 368         -for i in $(SHAREDMODS); do \
 369                 $(INSTALL_SHARED) $$i $(TARGETDIR)/$$i; \
 370         done
 371         -for i in $(PYMODULES); do \
 372                 $(INSTALL) $$i $(TARGETDIR)/$$i; \
 373         done
 374         python $(LIBDEST)/compileall.py -l $(TARGETDIR)
 375         python -O $(LIBDEST)/compileall.py -l $(TARGETDIR)
 376
 377