wxwin.m4

   1 dnl ---------------------------------------------------------------------------
   2 dnl Author:          wxWidgets development team,
   3 dnl                  Francesco Montorsi,
   4 dnl                  Bob McCown (Mac-testing)
   5 dnl Creation date:   24/11/2001
   6 dnl RCS-ID:          $Id$
   7 dnl ---------------------------------------------------------------------------
   8
   9 dnl ===========================================================================
  10 dnl Table of Contents of this macro file:
  11 dnl -------------------------------------
  12 dnl
  13 dnl SECTION A: wxWidgets main macros
  14 dnl  - WX_CONFIG_OPTIONS
  15 dnl  - WX_CONFIG_CHECK
  16 dnl  - WXRC_CHECK
  17 dnl  - WX_STANDARD_OPTIONS
  18 dnl  - WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
  19 dnl  - WX_DETECT_STANDARD_OPTION_VALUES
  20 dnl
  21 dnl SECTION B: wxWidgets-related utilities
  22 dnl  - WX_LIKE_LIBNAME
  23 dnl  - WX_ARG_ENABLE_YESNOAUTO
  24 dnl  - WX_ARG_WITH_YESNOAUTO
  25 dnl
  26 dnl SECTION C: messages to the user
  27 dnl  - WX_STANDARD_OPTIONS_SUMMARY_MSG
  28 dnl  - WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN
  29 dnl  - WX_STANDARD_OPTIONS_SUMMARY_MSG_END
  30 dnl  - WX_BOOLOPT_SUMMARY
  31 dnl
  32 dnl The special "WX_DEBUG_CONFIGURE" variable can be set to 1 to enable extra
  33 dnl debug output on stdout from these macros.
  34 dnl ===========================================================================
  35
  36
  37 dnl ---------------------------------------------------------------------------
  38 dnl Macros for wxWidgets detection. Typically used in configure.in as:
  39 dnl
  40 dnl     AC_ARG_ENABLE(...)
  41 dnl     AC_ARG_WITH(...)
  42 dnl        ...
  43 dnl     WX_CONFIG_OPTIONS
  44 dnl        ...
  45 dnl        ...
  46 dnl     WX_CONFIG_CHECK([2.6.0], [wxWin=1])
  47 dnl     if test "$wxWin" != 1; then
  48 dnl        AC_MSG_ERROR([
  49 dnl                wxWidgets must be installed on your system
  50 dnl                but wx-config script couldn't be found.
  51 dnl
  52 dnl                Please check that wx-config is in path, the directory
  53 dnl                where wxWidgets libraries are installed (returned by
  54 dnl                'wx-config --libs' command) is in LD_LIBRARY_PATH or
  55 dnl                equivalent variable and wxWidgets version is 2.3.4 or above.
  56 dnl        ])
  57 dnl     fi
  58 dnl     CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
  59 dnl     CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY"
  60 dnl     CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
  61 dnl
  62 dnl     LIBS="$LIBS $WX_LIBS"
  63 dnl
  64 dnl If you want to support standard --enable-debug/unicode/shared options, you
  65 dnl may do the following:
  66 dnl
  67 dnl     ...
  68 dnl     AC_CANONICAL_SYSTEM
  69 dnl
  70 dnl     # define configure options
  71 dnl     WX_CONFIG_OPTIONS
  72 dnl     WX_STANDARD_OPTIONS([debug,unicode,shared,toolkit,wxshared])
  73 dnl
  74 dnl     # basic configure checks
  75 dnl     ...
  76 dnl
  77 dnl     # we want to always have DEBUG==WX_DEBUG and UNICODE==WX_UNICODE
  78 dnl     WX_DEBUG=$DEBUG
  79 dnl     WX_UNICODE=$UNICODE
  80 dnl
  81 dnl     WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
  82 dnl     WX_CONFIG_CHECK([2.8.0], [wxWin=1],,[html,core,net,base],[$WXCONFIG_FLAGS])
  83 dnl     WX_DETECT_STANDARD_OPTION_VALUES
  84 dnl
  85 dnl     # write the output files
  86 dnl     AC_CONFIG_FILES([Makefile ...])
  87 dnl     AC_OUTPUT
  88 dnl
  89 dnl     # optional: just to show a message to the user
  90 dnl     WX_STANDARD_OPTIONS_SUMMARY_MSG
  91 dnl
  92 dnl ---------------------------------------------------------------------------
  93
  94
  95 dnl ---------------------------------------------------------------------------
  96 dnl WX_CONFIG_OPTIONS
  97 dnl
  98 dnl adds support for --wx-prefix, --wx-exec-prefix, --with-wxdir and
  99 dnl --wx-config command line options
 100 dnl ---------------------------------------------------------------------------
 101
 102 AC_DEFUN([WX_CONFIG_OPTIONS],
 103 [
 104     AC_ARG_WITH(wxdir,
 105                 [  --with-wxdir=PATH       Use uninstalled version of wxWidgets in PATH],
 106                 [ wx_config_name="$withval/wx-config"
 107                   wx_config_args="--inplace"])
 108     AC_ARG_WITH(wx-config,
 109                 [  --with-wx-config=CONFIG wx-config script to use (optional)],
 110                 wx_config_name="$withval" )
 111     AC_ARG_WITH(wx-prefix,
 112                 [  --with-wx-prefix=PREFIX Prefix where wxWidgets is installed (optional)],
 113                 wx_config_prefix="$withval", wx_config_prefix="")
 114     AC_ARG_WITH(wx-exec-prefix,
 115                 [  --with-wx-exec-prefix=PREFIX
 116                           Exec prefix where wxWidgets is installed (optional)],
 117                 wx_config_exec_prefix="$withval", wx_config_exec_prefix="")
 118 ])
 119
 120 dnl Helper macro for checking if wx version is at least $1.$2.$3, set's
 121 dnl wx_ver_ok=yes if it is:
 122 AC_DEFUN([_WX_PRIVATE_CHECK_VERSION],
 123 [
 124     wx_ver_ok=""
 125     if test "x$WX_VERSION" != x ; then
 126       if test $wx_config_major_version -gt $1; then
 127         wx_ver_ok=yes
 128       else
 129         if test $wx_config_major_version -eq $1; then
 130            if test $wx_config_minor_version -gt $2; then
 131               wx_ver_ok=yes
 132            else
 133               if test $wx_config_minor_version -eq $2; then
 134                  if test $wx_config_micro_version -ge $3; then
 135                     wx_ver_ok=yes
 136                  fi
 137               fi
 138            fi
 139         fi
 140       fi
 141     fi
 142 ])
 143
 144 dnl ---------------------------------------------------------------------------
 145 dnl WX_CONFIG_CHECK(VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND
 146 dnl                  [, WX-LIBS [, ADDITIONAL-WX-CONFIG-FLAGS]]]])
 147 dnl
 148 dnl Test for wxWidgets, and define WX_C*FLAGS, WX_LIBS and WX_LIBS_STATIC
 149 dnl (the latter is for static linking against wxWidgets). Set WX_CONFIG_NAME
 150 dnl environment variable to override the default name of the wx-config script
 151 dnl to use. Set WX_CONFIG_PATH to specify the full path to wx-config - in this
 152 dnl case the macro won't even waste time on tests for its existence.
 153 dnl
 154 dnl Optional WX-LIBS argument contains comma- or space-separated list of
 155 dnl wxWidgets libraries to link against. If it is not specified then WX_LIBS
 156 dnl and WX_LIBS_STATIC will contain flags to link with all of the core
 157 dnl wxWidgets libraries.
 158 dnl
 159 dnl Optional ADDITIONAL-WX-CONFIG-FLAGS argument is appended to wx-config
 160 dnl invocation command in present. It can be used to fine-tune lookup of
 161 dnl best wxWidgets build available.
 162 dnl
 163 dnl Example use:
 164 dnl   WX_CONFIG_CHECK([2.6.0], [wxWin=1], [wxWin=0], [html,core,net]
 165 dnl                    [--unicode --debug])
 166 dnl ---------------------------------------------------------------------------
 167
 168 dnl
 169 dnl Get the cflags and libraries from the wx-config script
 170 dnl
 171 AC_DEFUN([WX_CONFIG_CHECK],
 172 [
 173   dnl do we have wx-config name: it can be wx-config or wxd-config or ...
 174   if test x${WX_CONFIG_NAME+set} != xset ; then
 175      WX_CONFIG_NAME=wx-config
 176   fi
 177
 178   if test "x$wx_config_name" != x ; then
 179      WX_CONFIG_NAME="$wx_config_name"
 180   fi
 181
 182   dnl deal with optional prefixes
 183   if test x$wx_config_exec_prefix != x ; then
 184      wx_config_args="$wx_config_args --exec-prefix=$wx_config_exec_prefix"
 185      WX_LOOKUP_PATH="$wx_config_exec_prefix/bin"
 186   fi
 187   if test x$wx_config_prefix != x ; then
 188      wx_config_args="$wx_config_args --prefix=$wx_config_prefix"
 189      WX_LOOKUP_PATH="$WX_LOOKUP_PATH:$wx_config_prefix/bin"
 190   fi
 191   if test "$cross_compiling" = "yes"; then
 192      wx_config_args="$wx_config_args --host=$host_alias"
 193   fi
 194
 195   dnl don't search the PATH if WX_CONFIG_NAME is absolute filename
 196   if test -x "$WX_CONFIG_NAME" ; then
 197      AC_MSG_CHECKING(for wx-config)
 198      WX_CONFIG_PATH="$WX_CONFIG_NAME"
 199      AC_MSG_RESULT($WX_CONFIG_PATH)
 200   else
 201      AC_PATH_PROG(WX_CONFIG_PATH, $WX_CONFIG_NAME, no, "$WX_LOOKUP_PATH:$PATH")
 202   fi
 203
 204   if test "$WX_CONFIG_PATH" != "no" ; then
 205     WX_VERSION=""
 206
 207     min_wx_version=ifelse([$1], ,2.2.1,$1)
 208     if test -z "$5" ; then
 209       AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version])
 210     else
 211       AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version ($5)])
 212     fi
 213
 214     dnl don't add the libraries ($4) to this variable as this would result in
 215     dnl an error when it's used with --version below
 216     WX_CONFIG_WITH_ARGS="$WX_CONFIG_PATH $wx_config_args $5"
 217
 218     WX_VERSION=`$WX_CONFIG_WITH_ARGS --version 2>/dev/null`
 219     wx_config_major_version=`echo $WX_VERSION | \
 220            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
 221     wx_config_minor_version=`echo $WX_VERSION | \
 222            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
 223     wx_config_micro_version=`echo $WX_VERSION | \
 224            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
 225
 226     wx_requested_major_version=`echo $min_wx_version | \
 227            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
 228     wx_requested_minor_version=`echo $min_wx_version | \
 229            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
 230     wx_requested_micro_version=`echo $min_wx_version | \
 231            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
 232
 233     _WX_PRIVATE_CHECK_VERSION([$wx_requested_major_version],
 234                               [$wx_requested_minor_version],
 235                               [$wx_requested_micro_version])
 236
 237     if test -n "$wx_ver_ok"; then
 238       AC_MSG_RESULT(yes (version $WX_VERSION))
 239       WX_LIBS=`$WX_CONFIG_WITH_ARGS --libs $4`
 240
 241       dnl is this even still appropriate?  --static is a real option now
 242       dnl and WX_CONFIG_WITH_ARGS is likely to contain it if that is
 243       dnl what the user actually wants, making this redundant at best.
 244       dnl For now keep it in case anyone actually used it in the past.
 245       AC_MSG_CHECKING([for wxWidgets static library])
 246       WX_LIBS_STATIC=`$WX_CONFIG_WITH_ARGS --static --libs $4 2>/dev/null`
 247       if test "x$WX_LIBS_STATIC" = "x"; then
 248         AC_MSG_RESULT(no)
 249       else
 250         AC_MSG_RESULT(yes)
 251       fi
 252
 253       dnl starting with version 2.2.6 wx-config has --cppflags argument
 254       wx_has_cppflags=""
 255       if test $wx_config_major_version -gt 2; then
 256         wx_has_cppflags=yes
 257       else
 258         if test $wx_config_major_version -eq 2; then
 259            if test $wx_config_minor_version -gt 2; then
 260               wx_has_cppflags=yes
 261            else
 262               if test $wx_config_minor_version -eq 2; then
 263                  if test $wx_config_micro_version -ge 6; then
 264                     wx_has_cppflags=yes
 265                  fi
 266               fi
 267            fi
 268         fi
 269       fi
 270
 271       dnl starting with version 2.7.0 wx-config has --rescomp option
 272       wx_has_rescomp=""
 273       if test $wx_config_major_version -gt 2; then
 274         wx_has_rescomp=yes
 275       else
 276         if test $wx_config_major_version -eq 2; then
 277            if test $wx_config_minor_version -ge 7; then
 278               wx_has_rescomp=yes
 279            fi
 280         fi
 281       fi
 282       if test "x$wx_has_rescomp" = x ; then
 283          dnl cannot give any useful info for resource compiler
 284          WX_RESCOMP=
 285       else
 286          WX_RESCOMP=`$WX_CONFIG_WITH_ARGS --rescomp`
 287       fi
 288
 289       if test "x$wx_has_cppflags" = x ; then
 290          dnl no choice but to define all flags like CFLAGS
 291          WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4`
 292          WX_CPPFLAGS=$WX_CFLAGS
 293          WX_CXXFLAGS=$WX_CFLAGS
 294
 295          WX_CFLAGS_ONLY=$WX_CFLAGS
 296          WX_CXXFLAGS_ONLY=$WX_CFLAGS
 297       else
 298          dnl we have CPPFLAGS included in CFLAGS included in CXXFLAGS
 299          WX_CPPFLAGS=`$WX_CONFIG_WITH_ARGS --cppflags $4`
 300          WX_CXXFLAGS=`$WX_CONFIG_WITH_ARGS --cxxflags $4`
 301          WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4`
 302
 303          WX_CFLAGS_ONLY=`echo $WX_CFLAGS | sed "s@^$WX_CPPFLAGS *@@"`
 304          WX_CXXFLAGS_ONLY=`echo $WX_CXXFLAGS | sed "s@^$WX_CFLAGS *@@"`
 305       fi
 306
 307       ifelse([$2], , :, [$2])
 308
 309     else
 310
 311        if test "x$WX_VERSION" = x; then
 312           dnl no wx-config at all
 313           AC_MSG_RESULT(no)
 314        else
 315           AC_MSG_RESULT(no (version $WX_VERSION is not new enough))
 316        fi
 317
 318        WX_CFLAGS=""
 319        WX_CPPFLAGS=""
 320        WX_CXXFLAGS=""
 321        WX_LIBS=""
 322        WX_LIBS_STATIC=""
 323        WX_RESCOMP=""
 324
 325        if test ! -z "$5"; then
 326
 327           wx_error_message="
 328     The configuration you asked for $PACKAGE_NAME requires a wxWidgets
 329     build with the following settings:
 330         $5
 331     but such build is not available.
 332
 333     To see the wxWidgets builds available on this system, please use
 334     'wx-config --list' command. To use the default build, returned by
 335     'wx-config --selected-config', use the options with their 'auto'
 336     default values."
 337
 338        fi
 339
 340        wx_error_message="
 341     The requested wxWidgets build couldn't be found.
 342     $wx_error_message
 343
 344     If you still get this error, then check that 'wx-config' is
 345     in path, the directory where wxWidgets libraries are installed
 346     (returned by 'wx-config --libs' command) is in LD_LIBRARY_PATH
 347     or equivalent variable and wxWidgets version is $1 or above."
 348
 349        ifelse([$3], , AC_MSG_ERROR([$wx_error_message]), [$3])
 350
 351     fi
 352   else
 353
 354     WX_CFLAGS=""
 355     WX_CPPFLAGS=""
 356     WX_CXXFLAGS=""
 357     WX_LIBS=""
 358     WX_LIBS_STATIC=""
 359     WX_RESCOMP=""
 360
 361     ifelse([$3], , :, [$3])
 362
 363   fi
 364
 365   AC_SUBST(WX_CPPFLAGS)
 366   AC_SUBST(WX_CFLAGS)
 367   AC_SUBST(WX_CXXFLAGS)
 368   AC_SUBST(WX_CFLAGS_ONLY)
 369   AC_SUBST(WX_CXXFLAGS_ONLY)
 370   AC_SUBST(WX_LIBS)
 371   AC_SUBST(WX_LIBS_STATIC)
 372   AC_SUBST(WX_VERSION)
 373   AC_SUBST(WX_RESCOMP)
 374
 375   dnl need to export also WX_VERSION_MINOR and WX_VERSION_MAJOR symbols
 376   dnl to support wxpresets bakefiles (we export also WX_VERSION_MICRO for completeness):
 377   WX_VERSION_MAJOR="$wx_config_major_version"
 378   WX_VERSION_MINOR="$wx_config_minor_version"
 379   WX_VERSION_MICRO="$wx_config_micro_version"
 380   AC_SUBST(WX_VERSION_MAJOR)
 381   AC_SUBST(WX_VERSION_MINOR)
 382   AC_SUBST(WX_VERSION_MICRO)
 383 ])
 384
 385 dnl ---------------------------------------------------------------------------
 386 dnl Get information on the wxrc program for making C++, Python and xrs
 387 dnl resource files.
 388 dnl
 389 dnl     AC_ARG_ENABLE(...)
 390 dnl     AC_ARG_WITH(...)
 391 dnl        ...
 392 dnl     WX_CONFIG_OPTIONS
 393 dnl        ...
 394 dnl     WX_CONFIG_CHECK(2.6.0, wxWin=1)
 395 dnl     if test "$wxWin" != 1; then
 396 dnl        AC_MSG_ERROR([
 397 dnl                wxWidgets must be installed on your system
 398 dnl                but wx-config script couldn't be found.
 399 dnl
 400 dnl                Please check that wx-config is in path, the directory
 401 dnl                where wxWidgets libraries are installed (returned by
 402 dnl                'wx-config --libs' command) is in LD_LIBRARY_PATH or
 403 dnl                equivalent variable and wxWidgets version is 2.6.0 or above.
 404 dnl        ])
 405 dnl     fi
 406 dnl
 407 dnl     WXRC_CHECK([HAVE_WXRC=1], [HAVE_WXRC=0])
 408 dnl     if test "x$HAVE_WXRC" != x1; then
 409 dnl         AC_MSG_ERROR([
 410 dnl                The wxrc program was not installed or not found.
 411 dnl
 412 dnl                Please check the wxWidgets installation.
 413 dnl         ])
 414 dnl     fi
 415 dnl
 416 dnl     CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS"
 417 dnl     CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY"
 418 dnl     CFLAGS="$CFLAGS $WX_CFLAGS_ONLY"
 419 dnl
 420 dnl     LDFLAGS="$LDFLAGS $WX_LIBS"
 421 dnl ---------------------------------------------------------------------------
 422
 423 dnl ---------------------------------------------------------------------------
 424 dnl WXRC_CHECK([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
 425 dnl
 426 dnl Test for wxWidgets' wxrc program for creating either C++, Python or XRS
 427 dnl resources.  The variable WXRC will be set and substituted in the configure
 428 dnl script and Makefiles.
 429 dnl
 430 dnl Example use:
 431 dnl   WXRC_CHECK([wxrc=1], [wxrc=0])
 432 dnl ---------------------------------------------------------------------------
 433
 434 dnl
 435 dnl wxrc program from the wx-config script
 436 dnl
 437 AC_DEFUN([WXRC_CHECK],
 438 [
 439   AC_ARG_VAR([WXRC], [Path to wxWidget's wxrc resource compiler])
 440
 441   if test "x$WX_CONFIG_NAME" = x; then
 442     AC_MSG_ERROR([The wxrc tests must run after wxWidgets test.])
 443   else
 444
 445     AC_MSG_CHECKING([for wxrc])
 446
 447     if test "x$WXRC" = x ; then
 448       dnl wx-config --utility is a new addition to wxWidgets:
 449       _WX_PRIVATE_CHECK_VERSION(2,5,3)
 450       if test -n "$wx_ver_ok"; then
 451         WXRC=`$WX_CONFIG_WITH_ARGS --utility=wxrc`
 452       fi
 453     fi
 454
 455     if test "x$WXRC" = x ; then
 456       AC_MSG_RESULT([not found])
 457       ifelse([$2], , :, [$2])
 458     else
 459       AC_MSG_RESULT([$WXRC])
 460       ifelse([$1], , :, [$1])
 461     fi
 462
 463     AC_SUBST(WXRC)
 464   fi
 465 ])
 466
 467 dnl ---------------------------------------------------------------------------
 468 dnl WX_LIKE_LIBNAME([output-var] [prefix], [name])
 469 dnl
 470 dnl Sets the "output-var" variable to the name of a library named with same
 471 dnl wxWidgets rule.
 472 dnl E.g. for output-var=='lib', name=='test', prefix='mine', sets
 473 dnl      the $lib variable to:
 474 dnl          'mine_gtk2ud_test-2.8'
 475 dnl      if WX_PORT=gtk2, WX_UNICODE=1, WX_DEBUG=1 and WX_RELEASE=28
 476 dnl ---------------------------------------------------------------------------
 477 AC_DEFUN([WX_LIKE_LIBNAME],
 478     [
 479         wx_temp="$2""_""$WX_PORT"
 480
 481         dnl add the [u][d] string
 482         if test "$WX_UNICODE" = "1"; then
 483             wx_temp="$wx_temp""u"
 484         fi
 485         if test "$WX_DEBUG" = "1"; then
 486             wx_temp="$wx_temp""d"
 487         fi
 488
 489         dnl complete the name of the lib
 490         wx_temp="$wx_temp""_""$3""-$WX_VERSION_MAJOR.$WX_VERSION_MINOR"
 491
 492         dnl save it in the user's variable
 493         $1=$wx_temp
 494     ])
 495
 496 dnl ---------------------------------------------------------------------------
 497 dnl WX_ARG_ENABLE_YESNOAUTO/WX_ARG_WITH_YESNOAUTO
 498 dnl
 499 dnl Two little custom macros which define the ENABLE/WITH configure arguments.
 500 dnl Macro arguments:
 501 dnl $1 = the name of the --enable / --with  feature
 502 dnl $2 = the name of the variable associated
 503 dnl $3 = the description of that feature
 504 dnl $4 = the default value for that feature
 505 dnl $5 = additional action to do in case option is given with "yes" value
 506 dnl ---------------------------------------------------------------------------
 507 AC_DEFUN([WX_ARG_ENABLE_YESNOAUTO],
 508          [AC_ARG_ENABLE($1,
 509             AC_HELP_STRING([--enable-$1], [$3 (default is $4)]),
 510             [], [enableval="$4"])
 511
 512             dnl Show a message to the user about this option
 513             AC_MSG_CHECKING([for the --enable-$1 option])
 514             if test "$enableval" = "yes" ; then
 515                 AC_MSG_RESULT([yes])
 516                 $2=1
 517                 $5
 518             elif test "$enableval" = "no" ; then
 519                 AC_MSG_RESULT([no])
 520                 $2=0
 521             elif test "$enableval" = "auto" ; then
 522                 AC_MSG_RESULT([will be automatically detected])
 523                 $2="auto"
 524             else
 525                 AC_MSG_ERROR([
 526     Unrecognized option value (allowed values: yes, no, auto)
 527                 ])
 528             fi
 529          ])
 530
 531 AC_DEFUN([WX_ARG_WITH_YESNOAUTO],
 532          [AC_ARG_WITH($1,
 533             AC_HELP_STRING([--with-$1], [$3 (default is $4)]),
 534             [], [withval="$4"])
 535
 536             dnl Show a message to the user about this option
 537             AC_MSG_CHECKING([for the --with-$1 option])
 538             if test "$withval" = "yes" ; then
 539                 AC_MSG_RESULT([yes])
 540                 $2=1
 541                 $5
 542             dnl NB: by default we don't allow --with-$1=no option
 543             dnl     since it does not make much sense !
 544             elif test "$6" = "1" -a "$withval" = "no" ; then
 545                 AC_MSG_RESULT([no])
 546                 $2=0
 547             elif test "$withval" = "auto" ; then
 548                 AC_MSG_RESULT([will be automatically detected])
 549                 $2="auto"
 550             else
 551                 AC_MSG_ERROR([
 552     Unrecognized option value (allowed values: yes, auto)
 553                 ])
 554             fi
 555          ])
 556
 557
 558 dnl ---------------------------------------------------------------------------
 559 dnl WX_STANDARD_OPTIONS([options-to-add])
 560 dnl
 561 dnl Adds to the configure script one or more of the following options:
 562 dnl   --enable-[debug|unicode|shared|wxshared|wxdebug]
 563 dnl   --with-[gtk|msw|motif|x11|mac|mgl|dfb]
 564 dnl   --with-wxversion
 565 dnl Then checks for their presence and eventually set the DEBUG, UNICODE, SHARED,
 566 dnl PORT, WX_SHARED, WX_DEBUG, variables to one of the "yes", "no", "auto" values.
 567 dnl
 568 dnl Note that e.g. UNICODE != WX_UNICODE; the first is the value of the
 569 dnl --enable-unicode option (in boolean format) while the second indicates
 570 dnl if wxWidgets was built in Unicode mode (and still is in boolean format).
 571 dnl ---------------------------------------------------------------------------
 572 AC_DEFUN([WX_STANDARD_OPTIONS],
 573         [
 574
 575         dnl the following lines will expand to WX_ARG_ENABLE_YESNOAUTO calls if and only if
 576         dnl the $1 argument contains respectively the debug,unicode or shared options.
 577
 578         dnl be careful here not to set debug flag if only "wxdebug" was specified
 579         ifelse(regexp([$1], [\bdebug]), [-1],,
 580                [WX_ARG_ENABLE_YESNOAUTO([debug], [DEBUG], [Build in debug mode], [auto])])
 581
 582         ifelse(index([$1], [unicode]), [-1],,
 583                [WX_ARG_ENABLE_YESNOAUTO([unicode], [UNICODE], [Build in Unicode mode], [auto])])
 584
 585         ifelse(regexp([$1], [\bshared]), [-1],,
 586                [WX_ARG_ENABLE_YESNOAUTO([shared], [SHARED], [Build as shared library], [auto])])
 587
 588         dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-toolkit since it's an option
 589         dnl which must be able to accept the auto|gtk1|gtk2|msw|... values
 590         ifelse(index([$1], [toolkit]), [-1],,
 591                [
 592                 AC_ARG_WITH([toolkit],
 593                             AC_HELP_STRING([--with-toolkit],
 594                                            [Build against a specific wxWidgets toolkit (default is auto)]),
 595                             [], [withval="auto"])
 596
 597                 dnl Show a message to the user about this option
 598                 AC_MSG_CHECKING([for the --with-toolkit option])
 599                 if test "$withval" = "auto" ; then
 600                     AC_MSG_RESULT([will be automatically detected])
 601                     TOOLKIT="auto"
 602                 else
 603                     TOOLKIT="$withval"
 604
 605                     dnl PORT must be one of the allowed values
 606                     if test "$TOOLKIT" != "gtk1" -a "$TOOLKIT" != "gtk2" -a \
 607                             "$TOOLKIT" != "msw" -a "$TOOLKIT" != "motif" -a \
 608                             "$TOOLKIT" != "x11" -a "$TOOLKIT" != "mac" -a \
 609                             "$TOOLKIT" != "mgl" -a "$TOOLKIT" != "dfb" ; then
 610                         AC_MSG_ERROR([
 611     Unrecognized option value (allowed values: auto, gtk1, gtk2, msw, motif, x11, mac, mgl, dfb)
 612                         ])
 613                     fi
 614
 615                     AC_MSG_RESULT([$TOOLKIT])
 616                 fi
 617                ])
 618
 619         dnl ****** IMPORTANT *******
 620         dnl   Unlike for the UNICODE setting, you can build your program in
 621         dnl   shared mode against a static build of wxWidgets. Thus we have the
 622         dnl   following option which allows these mixtures. E.g.
 623         dnl
 624         dnl      ./configure --disable-shared --with-wxshared
 625         dnl
 626         dnl   will build your library in static mode against the first available
 627         dnl   shared build of wxWidgets.
 628         dnl
 629         dnl   Note that's not possible to do the viceversa:
 630         dnl
 631         dnl      ./configure --enable-shared --without-wxshared
 632         dnl
 633         dnl   Doing so you would try to build your library in shared mode against a static
 634         dnl   build of wxWidgets. This is not possible (you would mix PIC and non PIC code) !
 635         dnl   A check for this combination of options is in WX_DETECT_STANDARD_OPTION_VALUES
 636         dnl   (where we know what 'auto' should be expanded to).
 637         dnl
 638         dnl   If you try to build something in ANSI mode against a UNICODE build
 639         dnl   of wxWidgets or in RELEASE mode against a DEBUG build of wxWidgets,
 640         dnl   then at best you'll get ton of linking errors !
 641         dnl ************************
 642
 643         ifelse(index([$1], [wxshared]), [-1],,
 644                [
 645                 WX_ARG_WITH_YESNOAUTO(
 646                     [wxshared], [WX_SHARED],
 647                     [Force building against a shared build of wxWidgets, even if --disable-shared is given],
 648                     [auto], [], [1])
 649                ])
 650
 651         dnl Just like for SHARED and WX_SHARED it may happen that some adventurous
 652         dnl peoples will want to mix a wxWidgets release build with a debug build of
 653         dnl his app/lib. So, we have both DEBUG and WX_DEBUG variables.
 654         ifelse(index([$1], [wxdebug]), [-1],,
 655                [
 656                 WX_ARG_WITH_YESNOAUTO(
 657                     [wxdebug], [WX_DEBUG],
 658                     [Force building against a debug build of wxWidgets, even if --disable-debug is given],
 659                     [auto], [], [1])
 660                ])
 661
 662         dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-wxversion since it's an option
 663         dnl which accepts the "auto|2.6|2.7|2.8|2.9|3.0" etc etc values
 664         ifelse(index([$1], [wxversion]), [-1],,
 665                [
 666                 AC_ARG_WITH([wxversion],
 667                             AC_HELP_STRING([--with-wxversion],
 668                                            [Build against a specific version of wxWidgets (default is auto)]),
 669                             [], [withval="auto"])
 670
 671                 dnl Show a message to the user about this option
 672                 AC_MSG_CHECKING([for the --with-wxversion option])
 673                 if test "$withval" = "auto" ; then
 674                     AC_MSG_RESULT([will be automatically detected])
 675                     WX_RELEASE="auto"
 676                 else
 677
 678                     wx_requested_major_version=`echo $withval | \
 679                         sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\1/'`
 680                     wx_requested_minor_version=`echo $withval | \
 681                         sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\2/'`
 682
 683                     dnl both vars above must be exactly 1 digit
 684                     if test "${#wx_requested_major_version}" != "1" -o \
 685                             "${#wx_requested_minor_version}" != "1" ; then
 686                         AC_MSG_ERROR([
 687     Unrecognized option value (allowed values: auto, 2.6, 2.7, 2.8, 2.9, 3.0)
 688                         ])
 689                     fi
 690
 691                     WX_RELEASE="$wx_requested_major_version"".""$wx_requested_minor_version"
 692                     AC_MSG_RESULT([$WX_RELEASE])
 693                 fi
 694                ])
 695
 696         if test "$WX_DEBUG_CONFIGURE" = "1"; then
 697             echo "[[dbg]] DEBUG: $DEBUG, WX_DEBUG: $WX_DEBUG"
 698             echo "[[dbg]] UNICODE: $UNICODE, WX_UNICODE: $WX_UNICODE"
 699             echo "[[dbg]] SHARED: $SHARED, WX_SHARED: $WX_SHARED"
 700             echo "[[dbg]] TOOLKIT: $TOOLKIT, WX_TOOLKIT: $WX_TOOLKIT"
 701             echo "[[dbg]] VERSION: $VERSION, WX_RELEASE: $WX_RELEASE"
 702         fi
 703     ])
 704
 705
 706 dnl ---------------------------------------------------------------------------
 707 dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS
 708 dnl
 709 dnl Sets the WXCONFIG_FLAGS string using the SHARED,DEBUG,UNICODE variable values
 710 dnl which are different from "auto".
 711 dnl Thus this macro needs to be called only once all options have been set.
 712 dnl ---------------------------------------------------------------------------
 713 AC_DEFUN([WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS],
 714         [
 715         if test "$WX_SHARED" = "1" ; then
 716             WXCONFIG_FLAGS="--static=no "
 717         elif test "$WX_SHARED" = "0" ; then
 718             WXCONFIG_FLAGS="--static=yes "
 719         fi
 720
 721         if test "$WX_DEBUG" = "1" ; then
 722             WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=yes "
 723         elif test "$WX_DEBUG" = "0" ; then
 724             WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=no "
 725         fi
 726
 727         dnl The user should have set WX_UNICODE=UNICODE
 728         if test "$WX_UNICODE" = "1" ; then
 729             WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=yes "
 730         elif test "$WX_UNICODE" = "0" ; then
 731             WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=no "
 732         fi
 733
 734         if test "$TOOLKIT" != "auto" ; then
 735             WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--toolkit=$TOOLKIT "
 736         fi
 737
 738         if test "$WX_RELEASE" != "auto" ; then
 739             WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--version=$WX_RELEASE "
 740         fi
 741
 742         dnl strip out the last space of the string
 743         WXCONFIG_FLAGS=${WXCONFIG_FLAGS% }
 744
 745         if test "$WX_DEBUG_CONFIGURE" = "1"; then
 746             echo "[[dbg]] WXCONFIG_FLAGS: $WXCONFIG_FLAGS"
 747         fi
 748     ])
 749
 750
 751 dnl ---------------------------------------------------------------------------
 752 dnl _WX_SELECTEDCONFIG_CHECKFOR([RESULTVAR], [STRING], [MSG]
 753 dnl                             [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
 754 dnl
 755 dnl Outputs the given MSG. Then searches the given STRING in the wxWidgets
 756 dnl additional CPP flags and put the result of the search in WX_$RESULTVAR
 757 dnl also adding the "yes" or "no" message result to MSG.
 758 dnl ---------------------------------------------------------------------------
 759 AC_DEFUN([_WX_SELECTEDCONFIG_CHECKFOR],
 760         [
 761         if test "$$1" = "auto" ; then
 762
 763             dnl The user does not have particular preferences for this option;
 764             dnl so we will detect the wxWidgets relative build setting and use it
 765             AC_MSG_CHECKING([$3])
 766
 767             dnl set WX_$1 variable to 1 if the $WX_SELECTEDCONFIG contains the $2
 768             dnl string or to 0 otherwise.
 769             dnl NOTE: 'expr match STRING REGEXP' cannot be used since on Mac it
 770             dnl       doesn't work; we use 'expr STRING : REGEXP' instead
 771             WX_$1=$(expr "$WX_SELECTEDCONFIG" : ".*$2.*")
 772
 773             if test "$WX_$1" != "0"; then
 774                 WX_$1=1
 775                 AC_MSG_RESULT([yes])
 776                 ifelse([$4], , :, [$4])
 777             else
 778                 WX_$1=0
 779                 AC_MSG_RESULT([no])
 780                 ifelse([$5], , :, [$5])
 781             fi
 782         else
 783
 784             dnl Use the setting given by the user
 785             WX_$1=$$1
 786         fi
 787     ])
 788
 789 dnl ---------------------------------------------------------------------------
 790 dnl WX_DETECT_STANDARD_OPTION_VALUES
 791 dnl
 792 dnl Detects the values of the following variables:
 793 dnl 1) WX_RELEASE
 794 dnl 2) WX_UNICODE
 795 dnl 3) WX_DEBUG
 796 dnl 4) WX_SHARED    (and also WX_STATIC)
 797 dnl 5) WX_PORT
 798 dnl from the previously selected wxWidgets build; this macro in fact must be
 799 dnl called *after* calling the WX_CONFIG_CHECK macro.
 800 dnl
 801 dnl Note that the WX_VERSION_MAJOR, WX_VERSION_MINOR symbols are already set
 802 dnl by WX_CONFIG_CHECK macro
 803 dnl ---------------------------------------------------------------------------
 804 AC_DEFUN([WX_DETECT_STANDARD_OPTION_VALUES],
 805         [
 806         dnl IMPORTANT: WX_VERSION contains all three major.minor.micro digits,
 807         dnl            while WX_RELEASE only the major.minor ones.
 808         WX_RELEASE="$WX_VERSION_MAJOR""$WX_VERSION_MINOR"
 809         if test $WX_RELEASE -lt 26 ; then
 810
 811             AC_MSG_ERROR([
 812     Cannot detect the wxWidgets configuration for the selected wxWidgets build
 813     since its version is $WX_VERSION < 2.6.0; please install a newer
 814     version of wxWidgets.
 815                          ])
 816         fi
 817
 818         dnl The wx-config we are using understands the "--selected_config"
 819         dnl option which returns an easy-parseable string !
 820         WX_SELECTEDCONFIG=$($WX_CONFIG_WITH_ARGS --selected_config)
 821
 822         if test "$WX_DEBUG_CONFIGURE" = "1"; then
 823             echo "[[dbg]] Using wx-config --selected-config"
 824             echo "[[dbg]] WX_SELECTEDCONFIG: $WX_SELECTEDCONFIG"
 825         fi
 826
 827
 828         dnl we could test directly for WX_SHARED with a line like:
 829         dnl    _WX_SELECTEDCONFIG_CHECKFOR([SHARED], [shared],
 830         dnl                                [if wxWidgets was built in SHARED mode])
 831         dnl but wx-config --selected-config DOES NOT outputs the 'shared'
 832         dnl word when wx was built in shared mode; it rather outputs the
 833         dnl 'static' word when built in static mode.
 834         if test $WX_SHARED = "1"; then
 835             STATIC=0
 836         elif test $WX_SHARED = "0"; then
 837             STATIC=1
 838         elif test $WX_SHARED = "auto"; then
 839             STATIC="auto"
 840         fi
 841
 842         dnl Now set the WX_UNICODE, WX_DEBUG, WX_STATIC variables
 843         _WX_SELECTEDCONFIG_CHECKFOR([UNICODE], [unicode],
 844                                     [if wxWidgets was built with UNICODE enabled])
 845         _WX_SELECTEDCONFIG_CHECKFOR([DEBUG], [debug],
 846                                     [if wxWidgets was built in DEBUG mode])
 847         _WX_SELECTEDCONFIG_CHECKFOR([STATIC], [static],
 848                                     [if wxWidgets was built in STATIC mode])
 849
 850         dnl init WX_SHARED from WX_STATIC
 851         if test "$WX_STATIC" != "0"; then
 852             WX_SHARED=0
 853         else
 854             WX_SHARED=1
 855         fi
 856
 857         AC_SUBST(WX_UNICODE)
 858         AC_SUBST(WX_DEBUG)
 859         AC_SUBST(WX_SHARED)
 860
 861         dnl detect the WX_PORT to use
 862         if test "$TOOLKIT" = "auto" ; then
 863
 864             dnl The user does not have particular preferences for this option;
 865             dnl so we will detect the wxWidgets relative build setting and use it
 866             AC_MSG_CHECKING([which wxWidgets toolkit was selected])
 867
 868             WX_GTKPORT1=$(expr "$WX_SELECTEDCONFIG" : ".*gtk1.*")
 869             WX_GTKPORT2=$(expr "$WX_SELECTEDCONFIG" : ".*gtk2.*")
 870             WX_MSWPORT=$(expr "$WX_SELECTEDCONFIG" : ".*msw.*")
 871             WX_MOTIFPORT=$(expr "$WX_SELECTEDCONFIG" : ".*motif.*")
 872             WX_OSXCOCOAPORT=$(expr "$WX_SELECTEDCONFIG" : ".*osx_cocoa.*")
 873             WX_OSXCARBONPORT=$(expr "$WX_SELECTEDCONFIG" : ".*osx_carbon.*")
 874             WX_X11PORT=$(expr "$WX_SELECTEDCONFIG" : ".*x11.*")
 875             WX_MGLPORT=$(expr "$WX_SELECTEDCONFIG" : ".*mgl.*")
 876             WX_DFBPORT=$(expr "$WX_SELECTEDCONFIG" : ".*dfb.*")
 877
 878             WX_PORT="unknown"
 879             if test "$WX_GTKPORT1" != "0"; then WX_PORT="gtk1"; fi
 880             if test "$WX_GTKPORT2" != "0"; then WX_PORT="gtk2"; fi
 881             if test "$WX_MSWPORT" != "0"; then WX_PORT="msw"; fi
 882             if test "$WX_MOTIFPORT" != "0"; then WX_PORT="motif"; fi
 883             if test "$WX_OSXCOCOAPORT" != "0"; then WX_PORT="osx_cocoa"; fi
 884             if test "$WX_OSXCARBONPORT" != "0"; then WX_PORT="osx_carbon"; fi
 885             if test "$WX_X11PORT" != "0"; then WX_PORT="x11"; fi
 886             if test "$WX_MGLPORT" != "0"; then WX_PORT="mgl"; fi
 887             if test "$WX_DFBPORT" != "0"; then WX_PORT="dfb"; fi
 888
 889             dnl NOTE: backward-compatible check for wx2.8; in wx2.9 the mac
 890             dnl       ports are called 'osx_cocoa' and 'osx_carbon' (see above)
 891             WX_MACPORT=$(expr "$WX_SELECTEDCONFIG" : ".*mac.*")
 892             if test "$WX_MACPORT" != "0"; then WX_PORT="mac"; fi
 893
 894             dnl check at least one of the WX_*PORT has been set !
 895
 896             if test "$WX_PORT" = "unknown" ; then
 897                 AC_MSG_ERROR([
 898         Cannot detect the currently installed wxWidgets port !
 899         Please check your 'wx-config --cxxflags'...
 900                             ])
 901             fi
 902
 903             AC_MSG_RESULT([$WX_PORT])
 904         else
 905
 906             dnl Use the setting given by the user
 907             if test -z "$TOOLKIT" ; then
 908                 WX_PORT=$TOOLKIT
 909             else
 910                 dnl try with PORT
 911                 WX_PORT=$PORT
 912             fi
 913         fi
 914
 915         AC_SUBST(WX_PORT)
 916
 917         if test "$WX_DEBUG_CONFIGURE" = "1"; then
 918             echo "[[dbg]] Values of all WX_* options after final detection:"
 919             echo "[[dbg]] WX_DEBUG: $WX_DEBUG"
 920             echo "[[dbg]] WX_UNICODE: $WX_UNICODE"
 921             echo "[[dbg]] WX_SHARED: $WX_SHARED"
 922             echo "[[dbg]] WX_RELEASE: $WX_RELEASE"
 923             echo "[[dbg]] WX_PORT: $WX_PORT"
 924         fi
 925
 926         dnl Avoid problem described in the WX_STANDARD_OPTIONS which happens when
 927         dnl the user gives the options:
 928         dnl      ./configure --enable-shared --without-wxshared
 929         dnl or just do
 930         dnl      ./configure --enable-shared
 931         dnl but there is only a static build of wxWidgets available.
 932         if test "$WX_SHARED" = "0" -a "$SHARED" = "1"; then
 933             AC_MSG_ERROR([
 934     Cannot build shared library against a static build of wxWidgets !
 935     This error happens because the wxWidgets build which was selected
 936     has been detected as static while you asked to build $PACKAGE_NAME
 937     as shared library and this is not possible.
 938     Use the '--disable-shared' option to build $PACKAGE_NAME
 939     as static library or '--with-wxshared' to use wxWidgets as shared library.
 940                          ])
 941         fi
 942
 943         dnl now we can finally update the DEBUG,UNICODE,SHARED options
 944         dnl to their final values if they were set to 'auto'
 945         if test "$DEBUG" = "auto"; then
 946             DEBUG=$WX_DEBUG
 947         fi
 948         if test "$UNICODE" = "auto"; then
 949             UNICODE=$WX_UNICODE
 950         fi
 951         if test "$SHARED" = "auto"; then
 952             SHARED=$WX_SHARED
 953         fi
 954         if test "$TOOLKIT" = "auto"; then
 955             TOOLKIT=$WX_PORT
 956         fi
 957
 958         dnl in case the user needs a BUILD=debug/release var...
 959         if test "$DEBUG" = "1"; then
 960             BUILD="debug"
 961         elif test "$DEBUG" = "0" -o "$DEBUG" = ""; then
 962             BUILD="release"
 963         fi
 964
 965         dnl respect the DEBUG variable adding the optimize/debug flags
 966         dnl NOTE: the CXXFLAGS are merged together with the CPPFLAGS so we
 967         dnl       don't need to set them, too
 968         if test "$DEBUG" = "1"; then
 969             CXXFLAGS="$CXXFLAGS -g -O0"
 970             CFLAGS="$CFLAGS -g -O0"
 971         else
 972             CXXFLAGS="$CXXFLAGS -O2"
 973             CFLAGS="$CFLAGS -O2"
 974         fi
 975     ])
 976
 977 dnl ---------------------------------------------------------------------------
 978 dnl WX_BOOLOPT_SUMMARY([name of the boolean variable to show summary for],
 979 dnl                   [what to print when var is 1],
 980 dnl                   [what to print when var is 0])
 981 dnl
 982 dnl Prints $2 when variable $1 == 1 and prints $3 when variable $1 == 0.
 983 dnl This macro mainly exists just to make configure.ac scripts more readable.
 984 dnl
 985 dnl NOTE: you need to use the [" my message"] syntax for 2nd and 3rd arguments
 986 dnl       if you want that m4 avoid to throw away the spaces prefixed to the
 987 dnl       argument value.
 988 dnl ---------------------------------------------------------------------------
 989 AC_DEFUN([WX_BOOLOPT_SUMMARY],
 990         [
 991         if test "x$$1" = "x1" ; then
 992             echo $2
 993         elif test "x$$1" = "x0" ; then
 994             echo $3
 995         else
 996             echo "$1 is $$1"
 997         fi
 998     ])
 999
1000 dnl ---------------------------------------------------------------------------
1001 dnl WX_STANDARD_OPTIONS_SUMMARY_MSG
1002 dnl
1003 dnl Shows a summary message to the user about the WX_* variable contents.
1004 dnl This macro is used typically at the end of the configure script.
1005 dnl ---------------------------------------------------------------------------
1006 AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG],
1007         [
1008         echo
1009         echo "  The wxWidgets build which will be used by $PACKAGE_NAME $PACKAGE_VERSION"
1010         echo "  has the following settings:"
1011         WX_BOOLOPT_SUMMARY([WX_DEBUG],   ["  - DEBUG build"],  ["  - RELEASE build"])
1012         WX_BOOLOPT_SUMMARY([WX_UNICODE], ["  - UNICODE mode"], ["  - ANSI mode"])
1013         WX_BOOLOPT_SUMMARY([WX_SHARED],  ["  - SHARED mode"],  ["  - STATIC mode"])
1014         echo "  - VERSION: $WX_VERSION"
1015         echo "  - PORT: $WX_PORT"
1016     ])
1017
1018
1019 dnl ---------------------------------------------------------------------------
1020 dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN, WX_STANDARD_OPTIONS_SUMMARY_MSG_END
1021 dnl
1022 dnl Like WX_STANDARD_OPTIONS_SUMMARY_MSG macro but these two macros also gives info
1023 dnl about the configuration of the package which used the wxpresets.
1024 dnl
1025 dnl Typical usage:
1026 dnl    WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN
1027 dnl    echo "   - Package setting 1: $SETTING1"
1028 dnl    echo "   - Package setting 2: $SETTING1"
1029 dnl    ...
1030 dnl    WX_STANDARD_OPTIONS_SUMMARY_MSG_END
1031 dnl
1032 dnl ---------------------------------------------------------------------------
1033 AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN],
1034         [
1035         echo
1036         echo " ----------------------------------------------------------------"
1037         echo "  Configuration for $PACKAGE_NAME $PACKAGE_VERSION successfully completed."
1038         echo "  Summary of main configuration settings for $PACKAGE_NAME:"
1039         WX_BOOLOPT_SUMMARY([DEBUG], ["  - DEBUG build"], ["  - RELEASE build"])
1040         WX_BOOLOPT_SUMMARY([UNICODE], ["  - UNICODE mode"], ["  - ANSI mode"])
1041         WX_BOOLOPT_SUMMARY([SHARED], ["  - SHARED mode"], ["  - STATIC mode"])
1042     ])
1043
1044 AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_END],
1045         [
1046         WX_STANDARD_OPTIONS_SUMMARY_MSG
1047         echo
1048         echo "  Now, just run make."
1049         echo " ----------------------------------------------------------------"
1050         echo
1051     ])
1052
1053
1054 dnl ---------------------------------------------------------------------------
1055 dnl Deprecated macro wrappers
1056 dnl ---------------------------------------------------------------------------
1057
1058 AC_DEFUN([AM_OPTIONS_WXCONFIG], [WX_CONFIG_OPTIONS])
1059 AC_DEFUN([AM_PATH_WXCONFIG], [
1060     WX_CONFIG_CHECK([$1],[$2],[$3],[$4],[$5])
1061 ])
1062
1063