docs/osx/install.txt

   1 wxWidgets for Mac OS X installation
   2 -----------------------------------
   3
   4 wxWidgets can be compiled using Apple's Carbon or Cocoa libraries.
   5 Carbon is the older library, and Cocoa is the more modern library.
   6
   7 In wxWidgets 2.9.x, Cocoa is the recommended library.  While Carbon is still
   8 supported by Apple, little new work is being done in Carbon.
   9
  10 Most Mac OS X developers should start by downloading and installing Xcode
  11 from http://developer.apple.com.  It is a free IDE from Apple that provides
  12 all of the tools you need for working with wxWidgets.
  13
  14 After Xcode is installed, download either wxWidgets-{version}.tar.gz or
  15 wxMac-{version}.tar.gz and then double-click on it to unpack it to create
  16 a wxWidgets directory.
  17
  18 Next use Terminal (under Applications, Utilities, Terminal) to access a command
  19 prompt.  Use cd to change directories to your wxWidgets directory and execute
  20 one of the following sets of commands from the wxWidgets directory
  21
  22 ---------
  23
  24 # Build the library for Cocoa (wxWidgets 2.9.0 and later)
  25 mkdir build-cocoa-debug
  26 cd build-cocoa-debug
  27 ../configure --enable-unicode --enable-debug --disable-shared --with-osx_cocoa
  28 make;cd ..
  29 # Build the samples and demos
  30 cd build-cocoa-debug/samples; make;cd ../..
  31 cd build-cocoa-debug/demos;   make;cd ../..
  32
  33 ---------
  34
  35 # Build the library for Carbon
  36 mkdir build-carbon-debug
  37 cd build-carbon-debug
  38 ../configure --enable-unicode --enable-debug --disable-shared
  39 make;cd ..
  40 # Build the samples and demos
  41 cd build-carbon-debug/samples;make;cd ../..
  42 cd build-carbon-debug/demos;  make;cd ../..
  43
  44 ---------
  45
  46 After the compilation completes, use Finder to run the samples and demos
  47   Go to build-carbon-debug/samples to experiment with the Carbon samples.
  48   Go to build-carbon-debug/demos to experiment with the Carbon demos.
  49   Go to build-cocoa-debug/samples to experiment with the Cocoa samples.
  50   Go to biuld-cocoa-debug/demos to experiment with the Cocoa demos.
  51 Double-click on the executables which have an icon showing three small squares.
  52 The source code for the samples is in wxWidgets/samples
  53 The source code for the demos is in wxWidgets/demos
  54
  55 ---------
  56
  57 More information about building on Mac OS X is available in the wxWiki.
  58 Here are two useful links
  59   http://wiki.wxwidgets.org/Guides_%26_Tutorials
  60   http://wiki.wxwidgets.org/Development:_wxMac
  61
  62 ---------
  63
  64 More advanced topics are covered below.
  65
  66 ---------
  67
  68 If you want to install the library into the system directories you'll need
  69 to do this as root.  The accepted way of running commands as root is to
  70 use the built-in sudo mechanism.  First of all, you must be using an
  71 account marked as a "Computer Administrator".  Then
  72
  73 6) sudo make install
  74 7) type <YOUR OWN PASSWORD>
  75
  76 Note that while using this method is okay for development, it is not
  77 recommended that you require endusers to install wxWidgets into their
  78 system directories in order to use your program.  One way to avoid this
  79 is to configure wxWidgets with --disable-shared.  Another way to avoid
  80 it is to make a framework for wxWidgets.  Making frameworks is beyond
  81 the scope of this document.
  82
  83 Note:
  84 We recommend you configure a static library instead:
  85
  86 4) ../configure --disable-shared
  87
  88 or activate OpenGL:
  89
  90 4) ../configure --with-opengl
  91
  92 Note:
  93 It is rarely desirable to install non-Apple software into system directories.
  94 By configuring the library with --disable-shared and using the full path
  95 to wx-config with the --in-place option you can avoid installing the library.
  96
  97
  98 Apple Developer Tools: Xcode
  99 ----------------------------
 100
 101 You can use the project in src/wxWindows.xcodeproj to build wxWidgets,
 102 and there is a sample project supplied with the minimal sample.
 103
 104 Notice that the command line build above builds not just the library itself but
 105 also wxrc tool which doesn't have its own Xcode project. If you need this tool,
 106 the simplest possibility is to build it from the command line after installing
 107 the libraries using commands like this:
 108
 109 $ cd utils/wxrc
 110 $ g++ -o wxrc wxrc.cpp `wx-config --cxxflags --libs base,xml`
 111
 112 Creating universal binaries
 113 ---------------------------
 114
 115 The Xcode projects for the wxWidgets library and minimal project are set up
 116 to create universal binaries.
 117
 118 If using the Apple command line tools, pass --enable-universal_binary when
 119 configuring wxWidgets. If you use wx-config --libs to link your application,
 120 he necessary linker flags will be added. When compiling your own files,
 121 you need to add -arch ppc -arch i386 to your CFLAGS.
 122
 123 As an alternative to using --enable-universal_binary, you can build for
 124 each architecture separately and then use the lipo tool to glue the
 125 binaries together. Assuming building on a PPC system:
 126
 127 1. First build in the usual way to get the PPC library.
 128
 129 2. Then, build for Intel, in a different folder. This time use:
 130
 131 export CFLAGS="-g -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386"
 132 export LDFLAGS="-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk"
 133
 134 ./configure --disable-dependency-tracking --enable-static=yes --enable-shared=no \
 135   --target=i386-apple-darwin8 --host=powerpc-apple-darwin8 --build=i386-apple-darwin8
 136
 137 You will need to reverse the powerpc and i386 parameters everywhere to build PPC on an Intel
 138 machine.
 139
 140 3. Use lipo to glue the binaries together.
 141
 142 See also:
 143 http://developer.apple.com/technotes/tn2005/tn2137.html
 144
 145