wxPython/distrib/wxPythonFull.spec.in

   1 #----------------------------------------------------------------------
   2 # Name:        wxPython.spec
   3 # Purpose:     RPM Build and packaging instructions
   4 #
   5 # Author:      Robin Dunn
   6 #
   7 # RCS-ID:      $Id$
   8 # Copyright:   (c) 2004 by Total Control Software
   9 # Licence:     wxWindows license
  10 #----------------------------------------------------------------------
  11
  12
  13 # The following values can be set on the rpmbuild command line with
  14 # --define 'name VALUE'  If no value is set on the command line then
  15 # the default value set here will be used instead.
  16
  17
  18 # Which version of Python to build with.  Used to assemble python
  19 # binary name so use '2.3', '2.4', etc.
  20 %if %{?pyver:0}%{!?pyver:1}
  21 %define pyver 2.4
  22 %endif
  23
  24
  25 # Which wxWidgets port to build and use.  Current acceptable values
  26 # are 'gtk' and 'gtk2'.
  27 %if %{?port:0}%{!?port:1}
  28 %define port gtk2
  29 %endif
  30
  31
  32 # Build in unicode mode?  Can only be used if port is gtk2, acceptable
  33 # values are '0' and '1'
  34 %if %{?unicode:0}%{!?unicode:1}
  35 %define unicode 1
  36 %endif
  37
  38
  39 # Should the builtin image and etc. libs be used, or system libs?
  40 # Distro specific RPMs should probably set this to 0, generic ones
  41 # should use 1.
  42 # NOTE: I'm trying 0 for this next release to see if I can get rid of
  43 # this...
  44 %if %{?builtin_libs:0}%{!?builtin_libs:1}
  45 %define builtin_libs 0
  46 %endif
  47
  48
  49 # Should --enable-debug_flag be used in release builds?  Using it
  50 # defines __WXDEBUG__ and gives us runtime diagnostics that are turned
  51 # into Python exceptions.  (So turning it on is a very helpful thing
  52 # IMO and is recommended.)  The code is still compiled with
  53 # optimization flags and and without debug info and such when this
  54 # option is used, it simply turns on some extra code.
  55 %if %{?debug_flag:0}%{!?debug_flag:1}
  56 %define debug_flag 1
  57 %endif
  58
  59
  60 # Used to set the Release tag below.  I normally use it to define what
  61 # distro the RPM was built on and also include the version of Python
  62 # it was built with.
  63 %if %{?release:0}%{!?release:1}
  64 %define release 1_py%{pyver}
  65 %endif
  66
  67
  68 # This one is used to control whether the full 4 components of the
  69 # verseion number are used in the site-packages subdirectory name.  By
  70 # default only 2 or 3 components (depending on stable/unstable status)
  71 # are used.
  72 %if %{?fullver:0}%{!?fullver:1}
  73 %define fullver 0
  74 %endif
  75
  76
  77 # Whether to add --enable-mediactrl to the wxWidgets configure.  For
  78 # some older versions of gstreamer-0.8 it currently incorerctly allows
  79 # its use eventhough there is a compatibility problem that causes a
  80 # failed compile.
  81 %if %{?mediactrl:0}%{!?mediactrl:1}
  82 %define mediactrl 0
  83 %endif
  84
  85
  86 #----------------------------------------------------------------------
  87 # Other variables used below
  88
  89 %define pref       %{_prefix}
  90 %define python     /usr/bin/python%{pyver}
  91 %define tarname    @TARNAME@
  92 %define version    @VERSION@
  93 %define ver2       @VER2@
  94
  95 %define chartype   %(if [ "%{unicode}" = "1" ]; then echo unicode; else echo ansi; fi)
  96 %define gtktype    %(if [ "%{port}" = "gtk2" ]; then echo 2; fi)
  97 %define using_gtk1 %(if [ "%{port}" = "gtk" ]; then echo 1; else echo 0; fi)
  98
  99 %define wxprefbase %{pref}/lib/wxPython
 100 %define wxpref     %{wxprefbase}-%{version}-%{port}-%{chartype}
 101 %define pkgname    wxPython
 102
 103 # turn off the generation of debuginfo rpm  (RH9) ??
 104 %define debug_package %{nil}
 105
 106
 107 #----------------------------------------------------------------------
 108 # Package definition
 109 #----------------------------------------------------------------------
 110 Name:      %{pkgname}%{ver2}
 111 Summary:   Cross platform GUI toolkit for Python
 112 Version:   %{version}
 113 Release:   %{release}
 114 Source0:   %{tarname}-%{version}.tar.bz2
 115 License:   wx Library Licence, Version 3
 116 URL:       http://wxPython.org/
 117 Packager:  Robin Dunn <robin@alldunn.com>
 118 Group:     Development/Python
 119 BuildRoot: %{_tmppath}/%{pkgname}-buildroot
 120 Prefix:    %{pref}
 121
 122 %description
 123 Cross platform GUI toolkit for Python
 124
 125
 126
 127
 128 %package -n %{pkgname}%{ver2}-%{port}-%{chartype}
 129 Summary:   Cross platform GUI toolkit for Python
 130 Group:     Development/Python
 131 Requires:  %{pkgname}-common
 132 Obsoletes: wxPythonGTK%{gtktype}-py%{pyver}, wxPythonGTK%{gtktype}
 133 Provides:  wxPython
 134
 135
 136 %description -n %{pkgname}%{ver2}-%{port}-%{chartype}
 137 wxPython is a GUI toolkit for the Python programming language. It
 138 allows Python programmers to create programs with a robust, highly
 139 functional graphical user interface, simply and easily. It is
 140 implemented as a Python extension module (native code) that wraps the
 141 popular wxWidgets cross platform GUI library, which is written in C++.
 142
 143 wxPython is a cross-platform toolkit. The same program will usually
 144 run on multiple platforms without modification. Currently supported
 145 platforms are 32-bit Microsoft Windows, most Unix or unix-like
 146 systems, and Macintosh OS X.
 147
 148 This package contains the wxPython runtime files built for the
 149 wxWidgets %{port} port with %{chartype} character type.
 150
 151
 152
 153
 154
 155 %package -n %{pkgname}-common-%{port}-%{chartype}
 156 Summary: Common files for needed by all wxPython runtimes
 157 Group: Development/Python
 158 Provides: %{pkgname}-common
 159
 160 # They obsolete each other so any of them can be installed over another
 161 # without conflicts
 162 Obsoletes: %{pkgname}-common-gtk-ansi
 163 Obsoletes: %{pkgname}-common-gtk2-ansi
 164 Obsoletes: %{pkgname}-common-gtk2-unicode
 165
 166 %description -n %{pkgname}-common-%{port}-%{chartype}
 167 This package contains the common files needed by any version of the
 168 wxPython runtime.  This pacakge also installs a wx.pth file which will
 169 determine which of the installed runtimes is the default version of
 170 wxPython that is imported automatically with a bare "import wx".
 171
 172
 173
 174
 175
 176 %package -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 177 Summary: wxPython development files
 178 Group: Development/Libraries
 179 Requires: %{pkgname}%{ver2}-%{port}-%{chartype} = %{version}
 180
 181 %description -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 182 This packages contains the headers and etc. for building apps or
 183 Python extension modules that use the same wxWidgets shared libraries
 184 that wxPython uses.
 185
 186
 187
 188 #----------------------------------------------------------------------
 189 %prep
 190 %setup -q -n %{tarname}-%{version}
 191
 192
 193 #----------------------------------------------------------------------
 194 %build
 195
 196 WXDIR=`pwd`
 197
 198 # Configure and build wxWidgets
 199 mkdir bld
 200 cd bld
 201 ../configure \
 202 %if %{using_gtk1}
 203         --with-gtk=1 \
 204 %else
 205         --with-gtk=2 \
 206 %endif
 207         --prefix=%{wxpref} \
 208         --enable-monolithic \
 209         --disable-rpath \
 210         --with-opengl \
 211         --with-gnomeprint \
 212         --enable-geometry \
 213         --enable-optimise \
 214         --enable-sound  --with-sdl \
 215 %if %{mediactrl}
 216         --enable-mediactrl \
 217 %endif
 218         --enable-display \
 219 %if %{unicode}
 220         --enable-unicode \
 221 %else
 222         --disable-unicode \
 223 %endif
 224 %if %{debug_flag}
 225         --enable-debug_flag \
 226 %endif
 227         --disable-debugreport \
 228 %if %{builtin_libs}
 229         --with-libjpeg=builtin \
 230         --with-libpng=builtin \
 231         --with-libtiff=builtin \
 232         --with-zlib=builtin \
 233 %endif
 234
 235
 236 make
 237 make -C contrib/src/animate
 238 make -C contrib/src/gizmos
 239 make -C contrib/src/stc
 240
 241
 242
 243 # Build wxPython
 244 cd $WXDIR/wxPython
 245 %{python} setup.py \
 246         WXPORT=%{port} \
 247         UNICODE=%{unicode} \
 248         EP_ADD_OPTS=1 \
 249         EP_FULL_VER=%{fullver} \
 250         NO_SCRIPTS=1 \
 251         WX_CONFIG="$WXDIR/bld/wx-config --no_rpath" \
 252         build_ext --rpath=%{wxpref}/lib \
 253         build
 254
 255
 256
 257 #----------------------------------------------------------------------
 258 %install
 259
 260 WXDIR=`pwd`
 261
 262 # Install wxGTK and contribs
 263 cd bld
 264 make prefix=$RPM_BUILD_ROOT%{wxpref} install
 265 make -C contrib/src/animate prefix=$RPM_BUILD_ROOT%{wxpref} install
 266 make -C contrib/src/gizmos prefix=$RPM_BUILD_ROOT%{wxpref} install
 267 make -C contrib/src/stc prefix=$RPM_BUILD_ROOT%{wxpref} install
 268
 269
 270
 271 # Install wxPython for wxGTK
 272 cd $WXDIR/wxPython
 273 %{python} setup.py \
 274         WXPORT=%{port} \
 275         UNICODE=%{unicode} \
 276         EP_ADD_OPTS=1 \
 277         EP_FULL_VER=%{fullver} \
 278         NO_SCRIPTS=1 \
 279         WX_CONFIG="$RPM_BUILD_ROOT%{wxpref}/bin/wx-config --prefix=$RPM_BUILD_ROOT%{wxpref} --no_rpath" \
 280         build_ext --rpath=%{wxpref}/lib \
 281         install \
 282         --root=$RPM_BUILD_ROOT
 283
 284
 285 # remove the wx-config symlink, we'll redo it when installing the -devel package
 286 rm $RPM_BUILD_ROOT%{wxpref}/bin/wx-config
 287
 288 # make sure that debug info is stripped
 289 strip $RPM_BUILD_ROOT%{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/wx/*.so
 290
 291
 292 # Since I want this RPM to be as generic as possible I won't let
 293 # distutils copy the scripts (NO_SCRIPTS=1 above) since it will mangle
 294 # the #! line to use the real python pathname.  Since some distros
 295 # install python 2.2 as python2 and others as python I can't let
 296 # distutils do that otherwise the dependencies will be fouled up.
 297 # Copy them manually instead, leaving the #!/usr/bin/env line intact.
 298 cd $WXDIR/wxPython
 299 mkdir -p $RPM_BUILD_ROOT%{pref}/bin
 300 for s in \
 301         helpviewer \
 302         img2png \
 303         img2py \
 304         img2xpm \
 305         pyalacarte \
 306         pyalamode \
 307         pycrust \
 308         pywrap \
 309         pyshell \
 310         pywxrc \
 311         xrced; do
 312     cp scripts/$s $RPM_BUILD_ROOT%{pref}/bin
 313 done
 314
 315
 316
 317 # install KDE & GNOME menu items
 318 mkdir -p $RPM_BUILD_ROOT%{_datadir}/applnk/Development
 319 mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications
 320 for d in distrib/*.desktop; do
 321         install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applnk/Development
 322         install -m 644 $d $RPM_BUILD_ROOT%{_datadir}/applications
 323 done
 324
 325 # install KDE icons
 326 mkdir -p $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/{16x16,32x32}/apps
 327 mkdir -p $RPM_BUILD_ROOT%{_datadir}/pixmaps
 328 install -m 644 wx/py/PyCrust_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/PyCrust.png
 329 install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/PyCrust.png
 330 install -m 644 wx/py/PyCrust_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/PyCrust.png
 331 install -m 644 wx/tools/XRCed/XRCed_16.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/16x16/apps/XRCed.png
 332 install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/icons/hicolor/32x32/apps/XRCed.png
 333 install -m 644 wx/tools/XRCed/XRCed_32.png $RPM_BUILD_ROOT%{_datadir}/pixmaps/XRCed.png
 334
 335 # install Mandrake menu items
 336 mkdir -p $RPM_BUILD_ROOT%{_libdir}/menu
 337 cat > $RPM_BUILD_ROOT%{_libdir}/menu/%{pkgname} <<EOF
 338 ?package(%{pkgname}): \\
 339         command="%{_bindir}/pyshell" \\
 340         needs="X11" \\
 341         icon="PyCrust.png" \\
 342         section="Applications/Development/Tools" \\
 343         title="PyShell" \\
 344         longtitle="GUI Python Shell"
 345 ?package(%{pkgname}): \\
 346         command="%{_bindir}/pycrust" \\
 347         needs="X11" \\
 348         icon="PyCrust.png" \\
 349         section="Applications/Development/Tools" \\
 350         title="PyCrust" \\
 351         longtitle="GUI Python Shell with Filling"
 352 ?package(%{pkgname}): \\
 353         command="%{_bindir}/pyalamode" \\
 354         needs="X11" \\
 355         icon="PyCrust.png" \\
 356         section="Applications/Development/Tools" \\
 357         title="PyAlaMode" \\
 358         longtitle="GUI Python Shell with Filling and editor windows"
 359 ?package(%{pkgname}): \\
 360         command="%{_bindir}/xrced" \\
 361         needs="X11" \\
 362         icon="XRCed.png" \\
 363         section="Applications/Development/Tools" \\
 364         title="XRCed" \\
 365         longtitle="wxPython XRC resource editor"
 366 EOF
 367
 368
 369 #----------------------------------------------------------------------
 370
 371 %post -n %{pkgname}%{ver2}-%{port}-%{chartype}
 372 if [ ! -e %{wxprefbase} ]; then
 373         ln -s %{pkgname}-%{version}-%{port}-%{chartype}  %{wxprefbase}
 374 fi
 375
 376 %preun -n %{pkgname}%{ver2}-%{port}-%{chartype}
 377 if [ -L %{wxprefbase} ]; then
 378         if [ `readlink %{wxprefbase}` == %{pkgname}-%{version}-%{port}-%{chartype} ]; then
 379                 rm -f %{wxprefbase}
 380         fi
 381 fi
 382
 383
 384
 385
 386 %post -n %{pkgname}-common-%{port}-%{chartype}
 387 # This is done on Mandrake to update its menus:
 388 if [ -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
 389
 390 %postun -n %{pkgname}-common-%{port}-%{chartype}
 391 # This is done on Mandrake to update its menus:
 392 if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
 393
 394
 395
 396 %post -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 397 cd %{wxpref}/bin
 398 ln -s ../lib/wx/config/%{port}-%{chartype}*  wx-config
 399
 400 %preun -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 401 rm %{wxpref}/bin/wx-config
 402
 403
 404 #----------------------------------------------------------------------
 405 %clean
 406 [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf $RPM_BUILD_ROOT
 407
 408
 409 #----------------------------------------------------------------------
 410
 411 %files -n %{pkgname}%{ver2}-%{port}-%{chartype}
 412 %defattr(-,root,root)
 413 %doc docs/preamble.txt docs/licence.txt docs/lgpl.txt docs/readme.txt docs/changes.txt
 414 %doc wxPython/docs/*
 415 %dir %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}
 416 %{pref}/lib*/python%{pyver}/site-packages/wx-%{ver2}*-%{port}-%{chartype}/*
 417 %dir %{wxpref}
 418 %dir %{wxpref}/lib
 419 %{wxpref}/lib/libwx_gtk*
 420 %{wxpref}/share
 421
 422
 423
 424 %files -n %{pkgname}-common-%{port}-%{chartype}
 425 %defattr(-,root,root)
 426 %{pref}/lib*/python%{pyver}/site-packages/wxversion.*
 427 %{pref}/lib*/python%{pyver}/site-packages/wx.pth
 428 %{_bindir}/*
 429 %{_datadir}/applnk/Development/*
 430 %{_datadir}/applications/*
 431 %{_datadir}/icons/hicolor/*/apps/*
 432 %{_datadir}/pixmaps/*
 433 %{_libdir}/menu/*
 434
 435
 436
 437
 438
 439 %files -n %{pkgname}%{ver2}-devel-%{port}-%{chartype}
 440 %defattr(-,root,root)
 441 %{wxpref}/include
 442 %{wxpref}/lib/wx
 443 %dir %{wxpref}/bin
 444
 445
 446 #----------------------------------------------------------------------
 447 # end of file