docs/mgl/install.txt

   1 wxWindows 2.3 for MGL installation
   2 ------------------------------------
   3
   4 IMPORTANT NOTE:
   5
   6   If you experience problems installing, please re-read these
   7   instructions and other related files (todo.txt, bugs.txt and
   8   osname.txt for your platform if it exists) carefully before
   9   mailing wxwin-users or the author. Preferably, try to fix the
  10   problem first and then send a patch to the author.
  11
  12   When sending bug reports tell us what version of wxWindows you are
  13   using (including the beta) and what compiler on what system. One
  14   example: wxMGL 2.3.3, gcc 2.95.3, Redhat 7.0
  15
  16 First steps
  17 -----------
  18
  19 - Download SciTech MGL library (version 5.0) from http://www.scitechsoft.com.
  20   The downloads page is here:
  21   http://www.scitechsoft.com/products/embedded/wx_mgl_home.html
  22   (You needed a version newer than Beta 5! Preferably the one from SciTech
  23   Perforce repository.)
  24   Install it according to provided instructions. In particular, make sure that
  25   MGL_ROOT and NUCLEUS_PATH environment variables are set before attempting to
  26   build wxMGL.
  27
  28 - Download wxMGL-x.y.z.tgz, where x.y.z is the version number.
  29   Download documentation in a preferred format, such as
  30   wxWindows-HTML.zip or wxWindows-PDF.zip.
  31
  32 - Make a directory such as ~/wx and unarchive the files into this
  33   directory.
  34
  35 - It is recommended that you install bison and flex; using yacc
  36   and lex may require tweaking of the makefiles.
  37
  38 - You can now use configure or makefiles to build wxWindows and the samples.
  39   In case of problems, please use GNU make.
  40
  41
  42 COMPILING
  43 =========
  44
  45 Following systems are supported by wxMGL so far:
  46  - Unix (Linux etc.)
  47  - MS-DOS (DJGPP and Watcom compilers)
  48
  49
  50 * Compiling using configure
  51 ----------------------------
  52
  53 These instructions apply to installation on a Unix system (such as Linux). Please
  54 see bellow for information on using configure on non-Unix platforms.
  55
  56 If you compile wxWindows on Linux for the first time and don't like to read
  57 install instructions just do (in the base dir):
  58
  59 > ./configure --with-mgl
  60 > make
  61 > su <type root password>
  62 > make install
  63 > ldconfig
  64 > exit
  65
  66 Afterwards you can continue with
  67
  68 > make
  69 > su <type root password>
  70 > make install
  71 > ldconfig
  72 > exit
  73
  74 If you want to remove wxWindows on Unix you can do this:
  75
  76 > su <type root password>
  77 > make uninstall
  78 > ldconfig
  79 > exit
  80
  81 You can set many options to configure. Type
  82
  83 > ./configure --help
  84
  85 and you will get a list of supported options.
  86
  87
  88 * Using wxMGL library built with configure
  89 -------------------------------------------
  90
  91 'make install' will install wx-config script that can (and should) be used
  92 to get compiler flags that are needed to build your program. wx-config --cxxflags
  93 will output necessary C++ compiler flags and wx-config --libs will list all
  94 needed libraries. See an example of wxWindows application makefile:
  95
  96 minimal: minimal.o
  97         $(CC) -o minimal minimal.o `wx-config --libs`
  98
  99 minimal.o: minimal.cpp mondrian.xpm
 100         $(CC) `wx-config --cxxflags` -c minimal.cpp -o minimal.o
 101
 102
 103 * Using configure to build MS-DOS version
 104 ------------------------------------------
 105
 106 Even though configure is a Unix script, you can use it to build MS-DOS version
 107 of the wxMGL library. There are two possible ways to achieve this: you can
 108 either cross-compile from Unix or compile natively. Either way you will needed
 109 the DJGPP port of GCC compiler freely available from http://www.djgpp.org. You will
 110 also need DJGPP version of SciTech MGL (this must be built using native tools).
 111
 112 Cross-compilation is very easy. It works like ordinary compilation with configure,
 113 you only have to specify the target:
 114
 115 > ./configure --with-mgl --build=i586-linux --host=i586-pc-msdosdjgpp
 116 > make
 117
 118 If you want to build wxMGL natively using DJGPP compiler, you will have to install
 119 a couple of Unix utilities. The easiest way to get them is to install the Cygwin
 120 package (available from RedHat, see http://freshmeat.net/search/?q=cygwin for exact
 121 URL). Cygwin contains win32 compiler, so make sure you did *not* install it! Once
 122 you have Cygwin utilities and DJGPP compiler in your PATH, run bash.exe and type
 123
 124 > ./configure --with-mgl
 125 > make
 126
 127 in wxWindows top directory. You can build wxMGL in MS-DOS with configure, sorry.
 128
 129
 130 * Building wxMGL for MS-DOS using Watcom C/C++
 131 -----------------------------------------------
 132
 133 You will need Watcom C/C++ compiler version 11 or newer (Watcom is going to be
 134 OpenSourced by SciTech, check out http://www.openwatcom.org).
 135
 136 1. Edit $(WXDIR)\include\wx\univ\setup.h to suit your needs (in same way as you
 137    do when compiling wxMSW).
 138
 139 2. Go to $(WXDIR)\src\mgl and run
 140    > wmake -f makefile.wat all
 141
 142 3. You can compile the samples by typing 'wmake -f makefile.mgl all' in sample
 143    directory if this file is available. If it is not, copy makefile.wat to
 144    makefile.mgl and replace the line that says
 145
 146        !include $(WXDIR)\src\makeprog.wat
 147
 148    with
 149
 150        !include $(WXDIR)\src\mgl\makeprog.wat
 151
 152
 153 Bug reports
 154 -----------
 155
 156 Please send bug reports with a description of your environment,
 157 compiler and the error message(s) to the wxwin-developers mailing list at:
 158
 159     wx-dev@lists.wxwindows.org
 160
 161 Vaclav Slavik, Julian Smart, Robert Roebling and Vadim Zeitlin, February 2002.