]>
git.saurik.com Git - wxWidgets.git/blob - include/wx/msw/wince/setup.h
1 /////////////////////////////////////////////////////////////////////////////
2 // Name: wx/msw/setup.h
3 // Purpose: Configuration for the library
4 // Author: Julian Smart
8 // Copyright: (c) Julian Smart
9 // Licence: wxWindows licence
10 /////////////////////////////////////////////////////////////////////////////
15 // ----------------------------------------------------------------------------
17 // ----------------------------------------------------------------------------
19 // define this to 0 when building wxBase library - this can also be done from
20 // makefile/project file overriding the value here
25 // ----------------------------------------------------------------------------
26 // compatibility settings
27 // ----------------------------------------------------------------------------
29 // This setting determines the compatibility with 1.68 API:
30 // Level 0: no backward compatibility, all new features
31 // Level 1: some extra methods are defined for compatibility.
35 // Recommended setting: 0 (in fact the compatibility code is now very minimal
36 // so there is little advantage to setting it to 1.
37 #define WXWIN_COMPATIBILITY 0
39 // This setting determines the compatibility with 2.0 API: set it to 1 to
44 // Recommended setting: 0 (please update your code instead!)
45 #define WXWIN_COMPATIBILITY_2 0
47 // This setting determines the compatibility with 2.2 API: set it to 1 to
48 // enable it but please consider updating your code instead.
52 // Recommended setting: 0 (please update your code)
53 #define WXWIN_COMPATIBILITY_2_2 1
55 // This setting determines the compatibility with 2.4 API: set it to 0 to
56 // flag all cases of using deprecated functions.
58 // Default is 1 but please try building your code with 0 as the default will
59 // change to 0 in the next version and the deprecated functions will disappear
60 // in the version after it completely.
62 // Recommended setting: 0 (please update your code)
63 #define WXWIN_COMPATIBILITY_2_4 1
65 // Define as 1 for font size to be backward compatible to 1.63 and earlier.
66 // 1.64 and later define point sizes to be compatible with Windows.
70 // Recommended setting: 0
71 #define wxFONT_SIZE_COMPATIBILITY 0
73 // Set to 0 for accurate dialog units, else 1 to be as per 2.1.16 and before.
74 // If migrating between versions, your dialogs may seem to shrink.
78 // Recommended setting: 0 (the new calculations are more correct!)
79 #define wxDIALOG_UNIT_COMPATIBILITY 1
81 // ----------------------------------------------------------------------------
83 // ----------------------------------------------------------------------------
85 // Generic comment about debugging settings: they are very useful if you don't
86 // use any other memory leak detection tools such as Purify/BoundsChecker, but
87 // are probably redundant otherwise. Also, Visual C++ CRT has the same features
88 // as wxWindows memory debugging subsystem built in since version 5.0 and you
89 // may prefer to use it instead of built in memory debugging code because it is
90 // faster and more fool proof.
92 // Using VC++ CRT memory debugging is enabled by default in debug mode
93 // (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
94 // and if __NO_VC_CRTDBG__ is not defined.
96 // If 1, enables wxDebugContext, for writing error messages to file, etc. If
97 // __WXDEBUG__ is not defined, will still use the normal memory operators.
101 // Recommended setting: 0
102 #define wxUSE_DEBUG_CONTEXT 0
104 // If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
105 // __WXDEBUG__ is also defined.
107 // WARNING: this code may not work with all architectures, especially if
108 // alignment is an issue. This switch is currently ignored for mingw / cygwin
112 // Recommended setting: 1 if you are not using a memory debugging tool, else 0
113 #define wxUSE_MEMORY_TRACING 0
115 // In debug mode, cause new and delete to be redefined globally.
116 // If this causes problems (e.g. link errors which is a common problem
117 // especially if you use another library which also redefines the global new
118 // and delete), set this to 0.
119 // This switch is currently ignored for mingw / cygwin
123 // Recommended setting: 0
124 #define wxUSE_GLOBAL_MEMORY_OPERATORS 0
126 // In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
127 // this causes problems (e.g. link errors), set this to 0. You may need to set
128 // this to 0 if using templates (at least for VC++). This switch is currently
129 // ignored for mingw / cygwin / CodeWarrior
133 // Recommended setting: 0
134 #define wxUSE_DEBUG_NEW_ALWAYS 0
136 // wxHandleFatalExceptions() may be used to catch the program faults at run
137 // time and, instead of terminating the program with a usual GPF message box,
138 // call the user-defined wxApp::OnFatalException() function. If you set
139 // wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
141 // This setting is for Win32 only and can only be enabled if your compiler
142 // supports Win32 structured exception handling (currently only VC++ does)
146 // Recommended setting: 1 if your compiler supports it.
148 #define wxUSE_ON_FATAL_EXCEPTION 1
150 #define wxUSE_ON_FATAL_EXCEPTION 0
153 // ----------------------------------------------------------------------------
155 // ----------------------------------------------------------------------------
157 // Set wxUSE_UNICODE to 1 to compile wxWindows in Unicode mode: wxChar will be
158 // defined as wchar_t, wxString will use Unicode internally. If you set this
159 // to 1, you must use wxT() macro for all literal strings in the program.
161 // Unicode is currently only fully supported under Windows NT/2000/XP
162 // (Windows 9x doesn't support it and the programs compiled in Unicode mode
163 // will not run under 9x -- but see wxUSE_UNICODE_MSLU below).
167 // Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
168 #ifndef wxUSE_UNICODE
169 #define wxUSE_UNICODE 0
172 // Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWindows in Unicode mode
173 // and be able to run compiled apps under Windows 9x as well as NT/2000/XP.
174 // This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
175 // http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note that
176 // you will have to modify the makefiles to include unicows.lib import library
177 // as the first library (if you use MSVC, you can run the makefile with "nmake
178 // MSLU=1 UNICODE=1" command).
180 // If your compiler doesn't have unicows.lib, you can get a version of it at
181 // http://libunicows.sourceforge.net
185 // Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
186 #define wxUSE_UNICODE_MSLU 0
188 // Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
189 // compiling the program in Unicode mode. More precisely, it will be possible
190 // to construct wxString from a wide (Unicode) string and convert any wxString
195 // Recommended setting: 1
196 #define wxUSE_WCHAR_T 1
198 // ----------------------------------------------------------------------------
200 // ----------------------------------------------------------------------------
202 // Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
203 // std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
204 // and for wxHashMap to be implemented with templates.
208 // Recommended setting: YMMV
211 // Support for message/error logging. This includes wxLogXXX() functions and
212 // wxLog and derived classes. Don't set this to 0 unless you really know what
217 // Recommended setting: 1 (always)
220 // Recommended setting: 1
221 #define wxUSE_LOGWINDOW 1
223 // Recommended setting: 1
224 #define wxUSE_LOGGUI 1
226 // Recommended setting: 1
227 #define wxUSE_LOG_DIALOG 1
229 // Support for command line parsing using wxCmdLineParser class.
233 // Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
234 #define wxUSE_CMDLINE_PARSER 1
236 // Support for multithreaded applications: if 1, compile in thread classes
237 // (thread.h) and make the library a bit more thread safe. Although thread
238 // support is quite stable by now, you may still consider recompiling the
239 // library without it if you have no use for it - this will result in a
240 // somewhat smaller and faster operation.
242 // This is ignored under Win16, threads are only supported under Win32.
246 // Recommended setting: 0 unless you do plan to develop MT applications
247 #define wxUSE_THREADS 1
249 // If enabled (1), compiles wxWindows streams classes
250 #define wxUSE_STREAMS 1
252 // Use standard C++ streams if 1. If 0, use wxWin streams implementation.
253 #define wxUSE_STD_IOSTREAM 0
255 // ----------------------------------------------------------------------------
256 // non GUI features selection
257 // ----------------------------------------------------------------------------
259 // Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
260 // integer which is implemented in terms of native 64 bit integers if any or
261 // uses emulation otherwise.
263 // This class is required by wxDateTime and so you should enable it if you want
264 // to use wxDateTime. For most modern platforms, it will use the native 64 bit
265 // integers in which case (almost) all of its functions are inline and it
266 // almost does not take any space, so there should be no reason to switch it
269 // Recommended setting: 1
270 #define wxUSE_LONGLONG 1
272 // Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
273 // POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
277 // Recommended setting: 1 (wxFile is highly recommended as it is required by
278 // i18n code, wxFileConfig and others)
280 #define wxUSE_FFILE 1
282 // Use wxFSVolume class providing access to the configured/active mount points
286 // Recommended setting: 1 (but may be safely disabled if you don't use it)
287 #define wxUSE_FSVOLUME 1
289 // use wxTextBuffer class: required by wxTextFile
290 #define wxUSE_TEXTBUFFER 1
292 // use wxTextFile class: requires wxFile and wxTextBuffer, required by
294 #define wxUSE_TEXTFILE 1
296 // i18n support: _() macro, wxLocale class. Requires wxTextFile.
299 // Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
300 // allow to manipulate dates, times and time intervals. wxDateTime replaces the
301 // old wxTime and wxDate classes which are still provided for backwards
302 // compatibility (and implemented in terms of wxDateTime).
304 // Note that this class is relatively new and is still officially in alpha
305 // stage because some features are not yet (fully) implemented. It is already
306 // quite useful though and should only be disabled if you are aiming at
307 // absolutely minimal version of the library.
309 // Requires: wxUSE_LONGLONG
313 // Recommended setting: 1
314 #define wxUSE_DATETIME 1
316 // Set wxUSE_TIMER to 1 to compile wxTimer class
320 // Recommended setting: 1
321 #define wxUSE_TIMER 1
323 // Use wxStopWatch clas.
327 // Recommended setting: 1 (needed by wxSocket)
328 #define wxUSE_STOPWATCH 1
330 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
331 // which allow the application to store its settings in the persistent
332 // storage. Setting this to 1 will also enable on-demand creation of the
333 // global config object in wxApp.
335 // See also wxUSE_CONFIG_NATIVE below.
337 // Recommended setting: 1
338 #define wxUSE_CONFIG 1
340 // If wxUSE_CONFIG is 1, you may choose to use either the native config
341 // classes under Windows (using .INI files under Win16 and the registry under
342 // Win32) or the portable text file format used by the config classes under
345 // Default is 1 to use native classes. Note that you may still use
346 // wxFileConfig even if you set this to 1 - just the config object created by
347 // default for the applications needs will be a wxRegConfig or wxIniConfig and
350 // Recommended setting: 1
351 #define wxUSE_CONFIG_NATIVE 1
354 // Recommended setting: 1
355 #define wxUSE_FILECONFIG 0
357 // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
358 // to connect/disconnect from the network and be notified whenever the dial-up
359 // network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
363 // Recommended setting: 1
364 #define wxUSE_DIALUP_MANAGER 0
366 // Compile in classes for run-time DLL loading and function calling.
367 // Required by wxUSE_DIALUP_MANAGER.
369 // This setting is for Win32 only
373 // Recommended setting: 1
374 #define wxUSE_DYNLIB_CLASS 1
376 // experimental, don't use for now
377 #define wxUSE_DYNAMIC_LOADER 0
379 // Set to 1 to use socket classes
380 #define wxUSE_SOCKETS 0
382 // Set to 1 to enable virtual file systems (required by wxHTML)
383 #define wxUSE_FILESYSTEM 0
385 // Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
386 #define wxUSE_FS_ZIP 0
388 // Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
389 #define wxUSE_FS_INET 0
391 // Set to 1 to compile wxZipInput/OutputStream classes.
392 #define wxUSE_ZIPSTREAM 0
394 // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
398 // If enabled, the code written by Apple will be used to write, in a portable
399 // way, float on the disk. See extended.c for the license which is different
400 // from wxWindows one.
404 // Recommended setting: 1 unless you don't like the license terms (unlikely)
405 #define wxUSE_APPLE_IEEE 1
407 // Joystick support class
408 #define wxUSE_JOYSTICK 1
410 // wxFontMapper class
411 #define wxUSE_FONTMAP 1
413 // wxMimeTypesManager class
414 #define wxUSE_MIMETYPE 1
416 // wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP
417 // or wxURL you need to set this to 1.
421 // Recommended setting: 1
422 #define wxUSE_PROTOCOL 0
424 // The settings for the individual URL schemes
425 #define wxUSE_PROTOCOL_FILE 1
426 #define wxUSE_PROTOCOL_FTP 1
427 #define wxUSE_PROTOCOL_HTTP 1
429 // Define this to use wxURL class.
432 // Support for regular expression matching via wxRegEx class: enable this to
433 // use POSIX regular expressions in your code. You need to compile regex
434 // library from src/regex to use it under Windows.
438 // Recommended setting: 1 if your compiler supports it, if it doesn't please
439 // contribute us a makefile for src/regex for it
440 #define wxUSE_REGEX 0
442 // wxSystemOptions class
443 #define wxUSE_SYSTEM_OPTIONS 1
448 // ----------------------------------------------------------------------------
449 // Individual GUI controls
450 // ----------------------------------------------------------------------------
452 // You must set wxUSE_CONTROLS to 1 if you are using any controls at all
453 // (without it, wxControl class is not compiled)
457 // Recommended setting: 1 (don't change except for very special programs)
458 #define wxUSE_CONTROLS 1
460 // wxPopupWindow class is a top level transient window. It is currently used
461 // to implement wxTipWindow
465 // Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
466 #define wxUSE_POPUPWIN 1
468 // wxTipWindow allows to implement the custom tooltips, it is used by the
469 // context help classes. Requires wxUSE_POPUPWIN.
473 // Recommended setting: 1 (may be set to 0)
474 #define wxUSE_TIPWINDOW 1
476 // Each of the settings below corresponds to one wxWindows control. They are
477 // all switched on by default but may be disabled if you are sure that your
478 // program (including any standard dialogs it can show!) doesn't need them and
479 // if you desperately want to save some space. If you use any of these you must
480 // set wxUSE_CONTROLS as well.
484 // Recommended setting: 1
485 #define wxUSE_BUTTON 1 // wxButton
486 #define wxUSE_BMPBUTTON 1 // wxBitmapButton
487 #define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
488 #define wxUSE_CHECKBOX 1 // wxCheckBox
489 #define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
490 #define wxUSE_CHOICE 1 // wxChoice
491 #define wxUSE_COMBOBOX 1 // wxComboBox
492 #define wxUSE_GAUGE 1 // wxGauge
493 #define wxUSE_LISTBOX 1 // wxListBox
494 #define wxUSE_LISTCTRL 1 // wxListCtrl
495 #define wxUSE_RADIOBOX 1 // wxRadioBox
496 #define wxUSE_RADIOBTN 1 // wxRadioButton
497 #define wxUSE_SCROLLBAR 1 // wxScrollBar
498 #define wxUSE_SLIDER 1 // wxSlider
499 #define wxUSE_SPINBTN 1 // wxSpinButton
500 #define wxUSE_SPINCTRL 1 // wxSpinCtrl
501 #define wxUSE_STATBOX 1 // wxStaticBox
502 #define wxUSE_STATLINE 1 // wxStaticLine
503 #define wxUSE_STATTEXT 1 // wxStaticText
504 #define wxUSE_STATBMP 1 // wxStaticBitmap
505 #define wxUSE_TEXTCTRL 1 // wxTextCtrl
506 #define wxUSE_TOGGLEBTN 1 // requires wxButton
507 #define wxUSE_TREECTRL 1 // wxTreeCtrl
509 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
510 // below either wxStatusBar95 or a generic wxStatusBar will be used.
514 // Recommended setting: 1
515 #define wxUSE_STATUSBAR 1
517 // Two status bar implementations are available under Win32: the generic one
518 // or the wrapper around native control. For native look and feel the native
519 // version should be used.
523 // Recommended setting: 1 (there is no advantage in using the generic one)
524 #define wxUSE_NATIVE_STATUSBAR 1
526 // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
527 // classes at all. Otherwise, use the native toolbar class unless
528 // wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which
529 // supports some features which might not be supported by the native wxToolBar
530 // class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1.
532 // Default is 1 for all settings.
534 // Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for
535 // wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility).
536 #define wxUSE_TOOLBAR 1
537 #define wxUSE_TOOLBAR_NATIVE 1
538 #define wxUSE_TOOLBAR_SIMPLE 1
540 // this setting is obsolete, value is ignored
541 #define wxUSE_BUTTONBAR 1
543 // wxNotebook is a control with several "tabs" located on one of its sides. It
544 // may be used ot logically organise the data presented to the user instead of
545 // putting everything in one huge dialog. It replaces wxTabControl and related
546 // classes of wxWin 1.6x.
550 // Recommended setting: 1
551 #define wxUSE_NOTEBOOK 1
553 // wxTabDialog is a generic version of wxNotebook but it is incompatible with
554 // the new class. It shouldn't be used in new code.
558 // Recommended setting: 0 (use wxNotebook)
559 #define wxUSE_TAB_DIALOG 0
563 // Default is 1 for both options.
565 // Recommended setting: 1
569 // ----------------------------------------------------------------------------
570 // Miscellaneous GUI stuff
571 // ----------------------------------------------------------------------------
573 // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
574 #define wxUSE_ACCEL 1
576 // Hotkey support (currently Windows only)
577 #define wxUSE_HOTKEY 1
579 // Use wxCaret: a class implementing a "cursor" in a text control (called caret
584 // Recommended setting: 1 (can be safely set to 0, not used by the library)
585 #define wxUSE_CARET 1
587 // Use wxDisplay class: it allows enumerating all displays on a system and
588 // working with them.
590 // Default is 0 because it isn't yet implemented on all platforms
592 // Recommended setting: 1 if you need it, can be safely set to 0 otherwise
593 #define wxUSE_DISPLAY 0
595 // Miscellaneous geometry code: needed for Canvas library
596 #define wxUSE_GEOMETRY 1
598 // Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
603 // Recommended setting: 1 (set it to 0 if you don't use any of the controls
604 // enumerated above, then this class is mostly useless too)
605 #define wxUSE_IMAGLIST 1
607 // Use wxMenu, wxMenuBar, wxMenuItem.
611 // Recommended setting: 1 (can't be disabled under MSW)
612 #define wxUSE_MENUS 1
614 // Use wxSashWindow class.
618 // Recommended setting: 1
621 // Use wxSplitterWindow class.
625 // Recommended setting: 1
626 #define wxUSE_SPLITTER 1
628 // Use wxToolTip and wxWindow::Set/GetToolTip() methods.
632 // Recommended setting: 1
633 #define wxUSE_TOOLTIPS 0
635 // wxValidator class and related methods
636 #define wxUSE_VALIDATORS 1
638 // wxDC cacheing implementation
639 #define wxUSE_DC_CACHEING 1
641 // Set this to 1 to enable the use of DIB's for wxBitmap to support
642 // bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only.
643 #define wxUSE_DIB_FOR_BITMAP 0
645 // ----------------------------------------------------------------------------
647 // ----------------------------------------------------------------------------
649 // Define 1 to use generic dialogs in Windows, even though they duplicate
650 // native common dialog (e.g. wxColourDialog). This is mainly useful for
655 // Recommended setting: 0
656 #define wxUSE_GENERIC_DIALOGS_IN_MSW 0
658 // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
659 // file selector, printer dialog). Switching this off also switches off the
660 // printing architecture and interactive wxPrinterDC.
664 // Recommended setting: 1 (unless it really doesn't work)
665 #define wxUSE_COMMON_DIALOGS 0
667 // wxBusyInfo displays window with message when app is busy. Works in same way
669 #define wxUSE_BUSYINFO 1
671 // Use single/multiple choice dialogs.
675 // Recommended setting: 1 (used in the library itself)
676 #define wxUSE_CHOICEDLG 1
678 // Use colour picker dialog
682 // Recommended setting: 1
683 #define wxUSE_COLOURDLG 1
685 // wxDirDlg class for getting a directory name from user
686 #define wxUSE_DIRDLG 1
688 // TODO: setting to choose the generic or native one
690 // Use file open/save dialogs.
694 // Recommended setting: 1 (used in many places in the library itself)
695 #define wxUSE_FILEDLG 1
697 // Use find/replace dialogs.
701 // Recommended setting: 1 (but may be safely set to 0)
702 #define wxUSE_FINDREPLDLG 1
704 // Use font picker dialog
708 // Recommended setting: 1 (used in the library itself)
709 #define wxUSE_FONTDLG 1
711 // Use wxMessageDialog and wxMessageBox.
715 // Recommended setting: 1 (used in the library itself)
716 #define wxUSE_MSGDLG 1
718 // progress dialog class for lengthy operations
719 #define wxUSE_PROGRESSDLG 1
721 // support for startup tips (wxShowTip &c)
722 #define wxUSE_STARTUP_TIPS 1
724 // text entry dialog and wxGetTextFromUser function
725 #define wxUSE_TEXTDLG 1
727 // number entry dialog
728 #define wxUSE_NUMBERDLG 1
730 // splash screen class
731 #define wxUSE_SPLASH 1
734 #define wxUSE_WIZARDDLG 1
736 // ----------------------------------------------------------------------------
738 // ----------------------------------------------------------------------------
740 // Windows supports the graphics format known as metafile which is, though not
741 // portable, is widely used under Windows and so is supported by wxWin (under
742 // Windows only, of course). Win16 (Win3.1) used the so-called "Window
743 // MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
744 // Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
745 // default, WMFs will be used under Win16 and EMFs under Win32. This may be
746 // changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
747 // wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
748 // in any metafile related classes at all.
750 // Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
752 // Recommended setting: default or 0 for everything for portable programs.
753 #define wxUSE_METAFILE 1
754 #define wxUSE_ENH_METAFILE 1
755 #define wxUSE_WIN_METAFILES_ALWAYS 0
757 // ----------------------------------------------------------------------------
758 // Big GUI components
759 // ----------------------------------------------------------------------------
761 // Set to 0 to disable document/view architecture
762 #define wxUSE_DOC_VIEW_ARCHITECTURE 1
764 // Set to 0 to disable MDI document/view architecture
765 #define wxUSE_MDI_ARCHITECTURE 1
767 // Set to 0 to disable print/preview architecture code
768 #define wxUSE_PRINTING_ARCHITECTURE 0
770 // wxHTML sublibrary allows to display HTML in wxWindow programs and much,
775 // Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
779 // Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
780 // headers and libraries to be able to compile the library with wxUSE_GLCANVAS
781 // set to 1. Note that for some compilers (notably Microsoft Visual C++) you
782 // will need to manually add opengl32.lib and glu32.lib to the list of
783 // libraries linked with your program if you use OpenGL.
787 // Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
788 #define wxUSE_GLCANVAS 0
790 // ----------------------------------------------------------------------------
792 // ----------------------------------------------------------------------------
794 // Use wxClipboard class for clipboard copy/paste.
798 // Recommended setting: 1
799 #define wxUSE_CLIPBOARD 1
801 // Use wxDataObject and related classes. Needed for clipboard and OLE drag and
806 // Recommended setting: 1
807 #define wxUSE_DATAOBJ 1
809 // Use wxDropTarget and wxDropSource classes for drag and drop (this is
810 // different from "built in" drag and drop in wxTreeCtrl which is always
811 // available). Requires wxUSE_DATAOBJ.
815 // Recommended setting: 1
816 #define wxUSE_DRAG_AND_DROP 1
818 // Use wxAccessible for enhanced and customisable accessibility.
819 // Depends on wxUSE_OLE.
823 // Recommended setting (at present): 0
824 #define wxUSE_ACCESSIBILITY 0
826 // ----------------------------------------------------------------------------
827 // miscellaneous settings
828 // ----------------------------------------------------------------------------
830 // wxSingleInstanceChecker class allows to verify at startup if another program
831 // instance is running (it is only available under Win32)
835 // Recommended setting: 1 (the class is tiny, disabling it won't save much
837 #define wxUSE_SNGLINST_CHECKER 1
839 #define wxUSE_DRAGIMAGE 1
842 // 0 for no interprocess comms
844 // 0 for no help facility
845 #define wxUSE_MS_HTML_HELP 0
846 // 0 for no MS HTML Help
848 // Use wxHTML-based help controller?
849 #define wxUSE_WXHTML_HELP 0
851 #define wxUSE_RESOURCES 0
852 // 0 for no wxGetResource/wxWriteResource
853 #define wxUSE_CONSTRAINTS 1
854 // 0 for no window layout constraint system
856 #define wxUSE_SPLINES 1
859 #define wxUSE_MOUSEWHEEL 1
860 // Include mouse wheel support
862 // ----------------------------------------------------------------------------
863 // postscript support settings
864 // ----------------------------------------------------------------------------
866 // Set to 1 for PostScript device context.
867 #define wxUSE_POSTSCRIPT 0
869 // Set to 1 to use font metric files in GetTextExtent
870 #define wxUSE_AFM_FOR_POSTSCRIPT 0
872 // Set to 0 to disable PostScript print/preview architecture code under Windows
873 // (just use Windows printing).
874 #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 0
876 // ----------------------------------------------------------------------------
878 // ----------------------------------------------------------------------------
880 // Define 1 to use ODBC classes
883 // For backward compatibility reasons, this parameter now only controls the
884 // default scrolling method used by cursors. This default behavior can be
885 // overriden by setting the second param of wxDB::wxDbGetConnection() or
886 // wxDb() constructor to indicate whether the connection (and any wxDbTable()s
887 // that use the connection) should support forward only scrolling of cursors,
888 // or both forward and backward support for backward scrolling cursors is
889 // dependent on the data source as well as the ODBC driver being used.
890 #define wxODBC_FWD_ONLY_CURSORS 1
892 // Default is 0. Set to 1 to use the deprecated classes, enum types, function,
893 // member variables. With a setting of 1, full backward compatability with the
894 // 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
895 // as future development will be done only on the non-deprecated
896 // functions/classes/member variables/etc.
897 #define wxODBC_BACKWARD_COMPATABILITY 0
899 // ----------------------------------------------------------------------------
900 // other compiler (mis)features
901 // ----------------------------------------------------------------------------
903 // Set this to 0 if your compiler can't cope with omission of prototype
908 // Recommended setting: 1 (should never need to set this to 0)
909 #define REMOVE_UNUSED_ARG 1
911 // VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
912 // them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1
913 // and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be
918 // Recommended setting: whatever your compiler likes more
919 #define wxUSE_IOSTREAMH 1
921 // ----------------------------------------------------------------------------
922 // image format support
923 // ----------------------------------------------------------------------------
925 // wxImage supports many different image formats which can be configured at
926 // compile-time. BMP is always supported, others are optional and can be safely
927 // disabled if you don't plan to use images in such format sometimes saving
928 // substantial amount of code in the final library.
930 // Some formats require an extra library which is included in wxWin sources
931 // which is mentioned if it is the case.
933 // Set to 1 for wxImage support (recommended).
934 #define wxUSE_IMAGE 1
936 // Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
937 #define wxUSE_LIBPNG 0
939 // Set to 1 for JPEG format support (requires libjpeg)
940 #define wxUSE_LIBJPEG 0
942 // Set to 1 for TIFF format support (requires libtiff)
943 #define wxUSE_LIBTIFF 0
945 // Set to 1 for GIF format support
948 // Set to 1 for PNM format support
951 // Set to 1 for PCX format support
954 // Set to 1 for IFF format support (Amiga format)
957 // Set to 1 for XPM format support
960 // Set to 1 for MS Icons and Cursors format support
961 #define wxUSE_ICO_CUR 0
963 // Set to 1 to compile in wxPalette class
964 #define wxUSE_PALETTE 1
966 // ----------------------------------------------------------------------------
967 // Windows-only settings
968 // ----------------------------------------------------------------------------
970 // Set this to 1 if you want to use wxWindows and MFC in the same program. This
971 // will override some other settings (see below)
975 // Recommended setting: 0 unless you really have to use MFC
978 // Set this to 1 for generic OLE support: this is required for drag-and-drop,
979 // clipboard, OLE Automation. Only set it to 0 if your compiler is very old and
980 // can't compile/doesn't have the OLE headers.
984 // Recommended setting: 1
987 // Set this to 1 to use Microsoft CTL3D library for "3D-look" under Win16 or NT
988 // 3.x. This setting is ignored under Win9x and NT 4.0+.
990 // Default is 0 for (most) Win32 (systems), 1 for Win16
992 // Recommended setting: same as default
993 #if defined(__WIN95__)
994 #define wxUSE_CTL3D 0
996 #define wxUSE_CTL3D 1
999 // Define as 1 to use Microsoft's ItsyBitsy small title bar library, for
1000 // wxMiniFrame. This setting is only used for Win3.1; Win9x and NT use native
1001 // miniframes support instead.
1003 // Default is 0 for (most) Win32 (systems), 1 for Win16
1005 // Recommended setting: same as default
1006 #if defined(__WIN95__)
1007 #define wxUSE_ITSY_BITSY 0
1009 #define wxUSE_ITSY_BITSY 1
1012 // Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
1013 // which allows to put more than ~32Kb of text in it even under Win9x (NT
1014 // doesn't have such limitation).
1016 // Default is 1 for compilers which support it
1018 // Recommended setting: 1, only set it to 0 if your compiler doesn't have
1019 // or can't compile <richedit.h>
1020 #if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__)
1021 #define wxUSE_RICHEDIT 1
1023 // TODO: This should be ifdef'ed for any compilers that don't support
1024 // RichEdit 2.0 but do have RichEdit 1.0...
1025 #define wxUSE_RICHEDIT2 1
1028 #define wxUSE_RICHEDIT 0
1029 #define wxUSE_RICHEDIT2 0
1032 // Set this to 1 to enable support for the owner-drawn menu and listboxes. This
1033 // is required by wxUSE_CHECKLISTBOX.
1037 // Recommended setting: 1, set to 0 for a small library size reduction
1038 #define wxUSE_OWNER_DRAWN 1
1040 // Set to 1 to compile MS Windows XP theme engine support
1041 #define wxUSE_UXTHEME 0
1043 // Set to 1 to auto-adapt to MS Windows XP themes where possible
1044 // (notably, wxNotebook pages)
1045 #define wxUSE_UXTHEME_AUTO 0
1047 // ----------------------------------------------------------------------------
1048 // obsolete settings
1049 // ----------------------------------------------------------------------------
1051 // NB: all settings in this section are obsolete and should not be used/changed
1052 // at all, they will disappear
1054 // Set to 1 to use PenWindows
1055 #define wxUSE_PENWINDOWS 0
1057 // Define 1 to use bitmap messages.
1058 #define wxUSE_BITMAP_MESSAGE 1
1060 // If 1, enables provision of run-time type information.
1061 // NOW MANDATORY: don't change.
1062 #define wxUSE_DYNAMIC_CLASSES 1