4 * Copyright (C) 1994-1996, Thomas G. Lane.
5 * This file is part of the Independent JPEG Group's software.
6 * For conditions of distribution and use, see the accompanying README file.
8 * This file contains code for merged upsampling/color conversion.
10 * This file combines functions from jdsample.c and jdcolor.c;
11 * read those files first to understand what's going on.
13 * When the chroma components are to be upsampled by simple replication
14 * (ie, box filtering), we can save some work in color conversion by
15 * calculating all the output pixels corresponding to a pair of chroma
16 * samples at one time. In the conversion equations
18 * G = Y + K2 * Cb + K3 * Cr
20 * only the Y term varies among the group of pixels corresponding to a pair
21 * of chroma samples, so the rest of the terms can be calculated just once.
22 * At typical sampling ratios, this eliminates half or three-quarters of the
23 * multiplications needed for color conversion.
25 * This file currently provides implementations for the following cases:
26 * YCbCr => RGB color conversion only.
27 * Sampling ratios of 2h1v or 2h2v.
28 * No scaling needed at upsample time.
29 * Corner-aligned (non-CCIR601) sampling alignment.
30 * Other special cases could be added, but in most applications these are
31 * the only common cases. (For uncommon cases we fall back on the more
32 * general code in jdsample.c and jdcolor.c.)
35 #define JPEG_INTERNALS
39 #ifdef UPSAMPLE_MERGING_SUPPORTED
42 /* Private subobject */
45 struct jpeg_upsampler pub
; /* public fields */
47 /* Pointer to routine to do actual upsampling/conversion of one row group */
48 JMETHOD(void, upmethod
, (j_decompress_ptr cinfo
,
49 JSAMPIMAGE input_buf
, JDIMENSION in_row_group_ctr
,
50 JSAMPARRAY output_buf
));
52 /* Private state for YCC->RGB conversion */
53 int * Cr_r_tab
; /* => table for Cr to R conversion */
54 int * Cb_b_tab
; /* => table for Cb to B conversion */
55 JPEG_INT32
* Cr_g_tab
; /* => table for Cr to G conversion */
56 JPEG_INT32
* Cb_g_tab
; /* => table for Cb to G conversion */
58 /* For 2:1 vertical sampling, we produce two output rows at a time.
59 * We need a "spare" row buffer to hold the second output row if the
60 * application provides just a one-row buffer; we also use the spare
61 * to discard the dummy last row if the image height is odd.
64 wxjpeg_boolean spare_full
; /* T if spare buffer is occupied */
66 JDIMENSION out_row_width
; /* samples per output row */
67 JDIMENSION rows_to_go
; /* counts rows remaining in image */
70 typedef my_upsampler
* my_upsample_ptr
;
72 #define SCALEBITS 16 /* speediest right-shift on some machines */
73 #define ONE_HALF ((JPEG_INT32) 1 << (SCALEBITS-1))
74 #define FIX(x) ((JPEG_INT32) ((x) * (1L<<SCALEBITS) + 0.5))
78 * Initialize tables for YCC->RGB colorspace conversion.
79 * This is taken directly from jdcolor.c; see that file for more info.
83 build_ycc_rgb_table (j_decompress_ptr cinfo
)
85 my_upsample_ptr upsample
= (my_upsample_ptr
) cinfo
->upsample
;
90 upsample
->Cr_r_tab
= (int *)
91 (*cinfo
->mem
->alloc_small
) ((j_common_ptr
) cinfo
, JPOOL_IMAGE
,
92 (MAXJSAMPLE
+1) * SIZEOF(int));
93 upsample
->Cb_b_tab
= (int *)
94 (*cinfo
->mem
->alloc_small
) ((j_common_ptr
) cinfo
, JPOOL_IMAGE
,
95 (MAXJSAMPLE
+1) * SIZEOF(int));
96 upsample
->Cr_g_tab
= (JPEG_INT32
*)
97 (*cinfo
->mem
->alloc_small
) ((j_common_ptr
) cinfo
, JPOOL_IMAGE
,
98 (MAXJSAMPLE
+1) * SIZEOF(JPEG_INT32
));
99 upsample
->Cb_g_tab
= (JPEG_INT32
*)
100 (*cinfo
->mem
->alloc_small
) ((j_common_ptr
) cinfo
, JPOOL_IMAGE
,
101 (MAXJSAMPLE
+1) * SIZEOF(JPEG_INT32
));
103 for (i
= 0, x
= -CENTERJSAMPLE
; i
<= MAXJSAMPLE
; i
++, x
++) {
104 /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
105 /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
106 /* Cr=>R value is nearest int to 1.40200 * x */
107 upsample
->Cr_r_tab
[i
] = (int)
108 RIGHT_SHIFT(FIX(1.40200) * x
+ ONE_HALF
, SCALEBITS
);
109 /* Cb=>B value is nearest int to 1.77200 * x */
110 upsample
->Cb_b_tab
[i
] = (int)
111 RIGHT_SHIFT(FIX(1.77200) * x
+ ONE_HALF
, SCALEBITS
);
112 /* Cr=>G value is scaled-up -0.71414 * x */
113 upsample
->Cr_g_tab
[i
] = (- FIX(0.71414)) * x
;
114 /* Cb=>G value is scaled-up -0.34414 * x */
115 /* We also add in ONE_HALF so that need not do it in inner loop */
116 upsample
->Cb_g_tab
[i
] = (- FIX(0.34414)) * x
+ ONE_HALF
;
122 * Initialize for an upsampling pass.
126 start_pass_merged_upsample (j_decompress_ptr cinfo
)
128 my_upsample_ptr upsample
= (my_upsample_ptr
) cinfo
->upsample
;
130 /* Mark the spare buffer empty */
131 upsample
->spare_full
= FALSE
;
132 /* Initialize total-height counter for detecting bottom of image */
133 upsample
->rows_to_go
= cinfo
->output_height
;
138 * Control routine to do upsampling (and color conversion).
140 * The control routine just handles the row buffering considerations.
144 merged_2v_upsample (j_decompress_ptr cinfo
,
145 JSAMPIMAGE input_buf
, JDIMENSION
*in_row_group_ctr
,
146 JDIMENSION in_row_groups_avail
,
147 JSAMPARRAY output_buf
, JDIMENSION
*out_row_ctr
,
148 JDIMENSION out_rows_avail
)
149 /* 2:1 vertical sampling case: may need a spare row. */
151 my_upsample_ptr upsample
= (my_upsample_ptr
) cinfo
->upsample
;
152 JSAMPROW work_ptrs
[2];
153 JDIMENSION num_rows
; /* number of rows returned to caller */
155 if (upsample
->spare_full
) {
156 /* If we have a spare row saved from a previous cycle, just return it. */
157 jcopy_sample_rows(& upsample
->spare_row
, 0, output_buf
+ *out_row_ctr
, 0,
158 1, upsample
->out_row_width
);
160 upsample
->spare_full
= FALSE
;
162 /* Figure number of rows to return to caller. */
164 /* Not more than the distance to the end of the image. */
165 if (num_rows
> upsample
->rows_to_go
)
166 num_rows
= upsample
->rows_to_go
;
167 /* And not more than what the client can accept: */
168 out_rows_avail
-= *out_row_ctr
;
169 if (num_rows
> out_rows_avail
)
170 num_rows
= out_rows_avail
;
171 /* Create output pointer array for upsampler. */
172 work_ptrs
[0] = output_buf
[*out_row_ctr
];
174 work_ptrs
[1] = output_buf
[*out_row_ctr
+ 1];
176 work_ptrs
[1] = upsample
->spare_row
;
177 upsample
->spare_full
= TRUE
;
179 /* Now do the upsampling. */
180 (*upsample
->upmethod
) (cinfo
, input_buf
, *in_row_group_ctr
, work_ptrs
);
184 *out_row_ctr
+= num_rows
;
185 upsample
->rows_to_go
-= num_rows
;
186 /* When the buffer is emptied, declare this input row group consumed */
187 if (! upsample
->spare_full
)
188 (*in_row_group_ctr
)++;
193 merged_1v_upsample (j_decompress_ptr cinfo
,
194 JSAMPIMAGE input_buf
, JDIMENSION
*in_row_group_ctr
,
195 JDIMENSION in_row_groups_avail
,
196 JSAMPARRAY output_buf
, JDIMENSION
*out_row_ctr
,
197 JDIMENSION out_rows_avail
)
198 /* 1:1 vertical sampling case: much easier, never need a spare row. */
200 my_upsample_ptr upsample
= (my_upsample_ptr
) cinfo
->upsample
;
202 /* Just do the upsampling. */
203 (*upsample
->upmethod
) (cinfo
, input_buf
, *in_row_group_ctr
,
204 output_buf
+ *out_row_ctr
);
207 (*in_row_group_ctr
)++;
212 * These are the routines invoked by the control routines to do
213 * the actual upsampling/conversion. One row group is processed per call.
215 * Note: since we may be writing directly into application-supplied buffers,
216 * we have to be honest about the output width; we can't assume the buffer
217 * has been rounded up to an even width.
222 * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical.
226 h2v1_merged_upsample (j_decompress_ptr cinfo
,
227 JSAMPIMAGE input_buf
, JDIMENSION in_row_group_ctr
,
228 JSAMPARRAY output_buf
)
230 my_upsample_ptr upsample
= (my_upsample_ptr
) cinfo
->upsample
;
231 register int y
, cred
, cgreen
, cblue
;
233 register JSAMPROW outptr
;
234 JSAMPROW inptr0
, inptr1
, inptr2
;
236 /* copy these pointers into registers if possible */
237 register JSAMPLE
* range_limit
= cinfo
->sample_range_limit
;
238 int * Crrtab
= upsample
->Cr_r_tab
;
239 int * Cbbtab
= upsample
->Cb_b_tab
;
240 JPEG_INT32
* Crgtab
= upsample
->Cr_g_tab
;
241 JPEG_INT32
* Cbgtab
= upsample
->Cb_g_tab
;
244 inptr0
= input_buf
[0][in_row_group_ctr
];
245 inptr1
= input_buf
[1][in_row_group_ctr
];
246 inptr2
= input_buf
[2][in_row_group_ctr
];
247 outptr
= output_buf
[0];
248 /* Loop for each pair of output pixels */
249 for (col
= cinfo
->output_width
>> 1; col
> 0; col
--) {
250 /* Do the chroma part of the calculation */
251 cb
= GETJSAMPLE(*inptr1
++);
252 cr
= GETJSAMPLE(*inptr2
++);
254 cgreen
= (int) RIGHT_SHIFT(Cbgtab
[cb
] + Crgtab
[cr
], SCALEBITS
);
256 /* Fetch 2 Y values and emit 2 pixels */
257 y
= GETJSAMPLE(*inptr0
++);
258 outptr
[RGB_RED
] = range_limit
[y
+ cred
];
259 outptr
[RGB_GREEN
] = range_limit
[y
+ cgreen
];
260 outptr
[RGB_BLUE
] = range_limit
[y
+ cblue
];
261 outptr
+= RGB_PIXELSIZE
;
262 y
= GETJSAMPLE(*inptr0
++);
263 outptr
[RGB_RED
] = range_limit
[y
+ cred
];
264 outptr
[RGB_GREEN
] = range_limit
[y
+ cgreen
];
265 outptr
[RGB_BLUE
] = range_limit
[y
+ cblue
];
266 outptr
+= RGB_PIXELSIZE
;
268 /* If image width is odd, do the last output column separately */
269 if (cinfo
->output_width
& 1) {
270 cb
= GETJSAMPLE(*inptr1
);
271 cr
= GETJSAMPLE(*inptr2
);
273 cgreen
= (int) RIGHT_SHIFT(Cbgtab
[cb
] + Crgtab
[cr
], SCALEBITS
);
275 y
= GETJSAMPLE(*inptr0
);
276 outptr
[RGB_RED
] = range_limit
[y
+ cred
];
277 outptr
[RGB_GREEN
] = range_limit
[y
+ cgreen
];
278 outptr
[RGB_BLUE
] = range_limit
[y
+ cblue
];
283 * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical.
287 h2v2_merged_upsample (j_decompress_ptr cinfo
,
288 JSAMPIMAGE input_buf
, JDIMENSION in_row_group_ctr
,
289 JSAMPARRAY output_buf
)
291 my_upsample_ptr upsample
= (my_upsample_ptr
) cinfo
->upsample
;
292 register int y
, cred
, cgreen
, cblue
;
294 register JSAMPROW outptr0
, outptr1
;
295 JSAMPROW inptr00
, inptr01
, inptr1
, inptr2
;
297 /* copy these pointers into registers if possible */
298 register JSAMPLE
* range_limit
= cinfo
->sample_range_limit
;
299 int * Crrtab
= upsample
->Cr_r_tab
;
300 int * Cbbtab
= upsample
->Cb_b_tab
;
301 JPEG_INT32
* Crgtab
= upsample
->Cr_g_tab
;
302 JPEG_INT32
* Cbgtab
= upsample
->Cb_g_tab
;
305 inptr00
= input_buf
[0][in_row_group_ctr
*2];
306 inptr01
= input_buf
[0][in_row_group_ctr
*2 + 1];
307 inptr1
= input_buf
[1][in_row_group_ctr
];
308 inptr2
= input_buf
[2][in_row_group_ctr
];
309 outptr0
= output_buf
[0];
310 outptr1
= output_buf
[1];
311 /* Loop for each group of output pixels */
312 for (col
= cinfo
->output_width
>> 1; col
> 0; col
--) {
313 /* Do the chroma part of the calculation */
314 cb
= GETJSAMPLE(*inptr1
++);
315 cr
= GETJSAMPLE(*inptr2
++);
317 cgreen
= (int) RIGHT_SHIFT(Cbgtab
[cb
] + Crgtab
[cr
], SCALEBITS
);
319 /* Fetch 4 Y values and emit 4 pixels */
320 y
= GETJSAMPLE(*inptr00
++);
321 outptr0
[RGB_RED
] = range_limit
[y
+ cred
];
322 outptr0
[RGB_GREEN
] = range_limit
[y
+ cgreen
];
323 outptr0
[RGB_BLUE
] = range_limit
[y
+ cblue
];
324 outptr0
+= RGB_PIXELSIZE
;
325 y
= GETJSAMPLE(*inptr00
++);
326 outptr0
[RGB_RED
] = range_limit
[y
+ cred
];
327 outptr0
[RGB_GREEN
] = range_limit
[y
+ cgreen
];
328 outptr0
[RGB_BLUE
] = range_limit
[y
+ cblue
];
329 outptr0
+= RGB_PIXELSIZE
;
330 y
= GETJSAMPLE(*inptr01
++);
331 outptr1
[RGB_RED
] = range_limit
[y
+ cred
];
332 outptr1
[RGB_GREEN
] = range_limit
[y
+ cgreen
];
333 outptr1
[RGB_BLUE
] = range_limit
[y
+ cblue
];
334 outptr1
+= RGB_PIXELSIZE
;
335 y
= GETJSAMPLE(*inptr01
++);
336 outptr1
[RGB_RED
] = range_limit
[y
+ cred
];
337 outptr1
[RGB_GREEN
] = range_limit
[y
+ cgreen
];
338 outptr1
[RGB_BLUE
] = range_limit
[y
+ cblue
];
339 outptr1
+= RGB_PIXELSIZE
;
341 /* If image width is odd, do the last output column separately */
342 if (cinfo
->output_width
& 1) {
343 cb
= GETJSAMPLE(*inptr1
);
344 cr
= GETJSAMPLE(*inptr2
);
346 cgreen
= (int) RIGHT_SHIFT(Cbgtab
[cb
] + Crgtab
[cr
], SCALEBITS
);
348 y
= GETJSAMPLE(*inptr00
);
349 outptr0
[RGB_RED
] = range_limit
[y
+ cred
];
350 outptr0
[RGB_GREEN
] = range_limit
[y
+ cgreen
];
351 outptr0
[RGB_BLUE
] = range_limit
[y
+ cblue
];
352 y
= GETJSAMPLE(*inptr01
);
353 outptr1
[RGB_RED
] = range_limit
[y
+ cred
];
354 outptr1
[RGB_GREEN
] = range_limit
[y
+ cgreen
];
355 outptr1
[RGB_BLUE
] = range_limit
[y
+ cblue
];
361 * Module initialization routine for merged upsampling/color conversion.
363 * NB: this is called under the conditions determined by use_merged_upsample()
364 * in jdmaster.c. That routine MUST correspond to the actual capabilities
365 * of this module; no safety checks are made here.
369 jinit_merged_upsampler (j_decompress_ptr cinfo
)
371 my_upsample_ptr upsample
;
373 upsample
= (my_upsample_ptr
)
374 (*cinfo
->mem
->alloc_small
) ((j_common_ptr
) cinfo
, JPOOL_IMAGE
,
375 SIZEOF(my_upsampler
));
376 cinfo
->upsample
= (struct jpeg_upsampler
*) upsample
;
377 upsample
->pub
.start_pass
= start_pass_merged_upsample
;
378 upsample
->pub
.need_context_rows
= FALSE
;
380 upsample
->out_row_width
= cinfo
->output_width
* cinfo
->out_color_components
;
382 if (cinfo
->max_v_samp_factor
== 2) {
383 upsample
->pub
.upsample
= merged_2v_upsample
;
384 upsample
->upmethod
= h2v2_merged_upsample
;
385 /* Allocate a spare row buffer */
386 upsample
->spare_row
= (JSAMPROW
)
387 (*cinfo
->mem
->alloc_large
) ((j_common_ptr
) cinfo
, JPOOL_IMAGE
,
388 (size_t) (upsample
->out_row_width
* SIZEOF(JSAMPLE
)));
390 upsample
->pub
.upsample
= merged_1v_upsample
;
391 upsample
->upmethod
= h2v1_merged_upsample
;
392 /* No spare row needed */
393 upsample
->spare_row
= NULL
;
396 build_ycc_rgb_table(cinfo
);
399 #endif /* UPSAMPLE_MERGING_SUPPORTED */