1 /////////////////////////////////////////////////////////////////////////////
3 // Purpose: Generic wxPostScriptDC implementation
4 // Author: Julian Smart, Robert Roebling, Markus Holzhem
8 // Copyright: (c) Julian Smart
9 // Licence: wxWindows licence
10 /////////////////////////////////////////////////////////////////////////////
12 #if defined(__GNUG__) && !defined(NO_GCC_PRAGMA)
13 #pragma implementation "dcpsg.h"
16 #include "wx/wxprec.h"
25 #if wxUSE_PRINTING_ARCHITECTURE
31 #include "wx/dcmemory.h"
37 #include "wx/generic/dcpsg.h"
38 #include "wx/prntbase.h"
40 #include "wx/filefn.h"
41 #if WXWIN_COMPATIBILITY_2_2
42 #include "wx/window.h"
43 #include "wx/printdlg.h"
68 //-----------------------------------------------------------------------------
69 // start and end of document/page
70 //-----------------------------------------------------------------------------
72 static const char *wxPostScriptHeaderConicTo
= "\
76 /conic_cntrl_y exch def\n\
77 /conic_cntrl_x exch def\n\
81 /p1_x p0_x conic_cntrl_x p0_x sub 2 3 div mul add def\n\
82 /p1_y p0_y conic_cntrl_y p0_y sub 2 3 div mul add def\n\
83 /p2_x p1_x to_x p0_x sub 1 3 div mul add def\n\
84 /p2_y p1_y to_y p0_y sub 1 3 div mul add def\n\
85 p1_x p1_y p2_x p2_y to_x to_y curveto\n\
89 static const char *wxPostScriptHeaderEllipse
= "\
90 /ellipsedict 8 dict def\n\
91 ellipsedict /mtrx matrix put\n\
95 /startangle exch def\n\
100 /savematrix mtrx currentmatrix def\n\
103 0 0 1 startangle endangle arc\n\
104 savematrix setmatrix\n\
109 static const char *wxPostScriptHeaderEllipticArc
= "\
110 /ellipticarcdict 8 dict def\n\
111 ellipticarcdict /mtrx matrix put\n\
113 { ellipticarcdict begin\n\
115 /endangle exch def\n\
116 /startangle exch def\n\
121 /savematrix mtrx currentmatrix def\n\
124 do_fill { 0 0 moveto } if\n\
125 0 0 1 startangle endangle arc\n\
126 savematrix setmatrix\n\
127 do_fill { fill }{ stroke } ifelse\n\
131 static const char *wxPostScriptHeaderSpline
= "\
132 /DrawSplineSection {\n\
139 /xa x1 x2 x1 sub 0.666667 mul add def\n\
140 /ya y1 y2 y1 sub 0.666667 mul add def\n\
141 /xb x3 x2 x3 sub 0.666667 mul add def\n\
142 /yb y3 y2 y3 sub 0.666667 mul add def\n\
144 xa ya xb yb x3 y3 curveto\n\
148 static const char *wxPostScriptHeaderColourImage
= "\
149 % define 'colorimage' if it isn't defined\n\
150 % ('colortogray' and 'mergeprocs' come from xwd2ps\n\
152 /colorimage where % do we know about 'colorimage'?\n\
153 { pop } % yes: pop off the 'dict' returned\n\
154 { % no: define one\n\
155 /colortogray { % define an RGB->I function\n\
156 /rgbdata exch store % call input 'rgbdata'\n\
157 rgbdata length 3 idiv\n\
158 /npixls exch store\n\
160 0 1 npixls 1 sub {\n\
162 rgbdata rgbindx get 20 mul % Red\n\
163 rgbdata rgbindx 1 add get 32 mul % Green\n\
164 rgbdata rgbindx 2 add get 12 mul % Blue\n\
165 add add 64 idiv % I = .5G + .31R + .18B\n\
167 /rgbindx rgbindx 3 add store\n\
169 grays 0 npixls getinterval\n\
172 % Utility procedure for colorimage operator.\n\
173 % This procedure takes two procedures off the\n\
174 % stack and merges them into a single procedure.\n\
176 /mergeprocs { % def\n\
195 /colorimage { % def\n\
196 pop pop % remove 'false 3' operands\n\
197 {colortogray} mergeprocs\n\
200 } ifelse % end of 'false' case\n\
205 static char wxPostScriptHeaderReencodeISO1
[] =
207 "dup dup findfont dup length dict begin\n"
208 "{ 1 index /FID ne { def }{ pop pop } ifelse } forall\n"
209 "/Encoding ISOLatin1Encoding def\n"
210 "currentdict end definefont\n"
212 "/ISOLatin1Encoding [\n"
213 "/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef\n"
214 "/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef\n"
215 "/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef\n"
216 "/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef\n"
217 "/space/exclam/quotedbl/numbersign/dollar/percent/ampersand/quoteright\n"
218 "/parenleft/parenright/asterisk/plus/comma/minus/period/slash\n"
219 "/zero/one/two/three/four/five/six/seven/eight/nine/colon/semicolon\n"
220 "/less/equal/greater/question/at/A/B/C/D/E/F/G/H/I/J/K/L/M/N\n"
221 "/O/P/Q/R/S/T/U/V/W/X/Y/Z/bracketleft/backslash/bracketright\n"
222 "/asciicircum/underscore/quoteleft/a/b/c/d/e/f/g/h/i/j/k/l/m\n"
223 "/n/o/p/q/r/s/t/u/v/w/x/y/z/braceleft/bar/braceright/asciitilde\n"
224 "/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef\n"
225 "/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef/.notdef\n"
226 "/.notdef/dotlessi/grave/acute/circumflex/tilde/macron/breve\n"
227 "/dotaccent/dieresis/.notdef/ring/cedilla/.notdef/hungarumlaut\n";
229 static char wxPostScriptHeaderReencodeISO2
[] =
230 "/ogonek/caron/space/exclamdown/cent/sterling/currency/yen/brokenbar\n"
231 "/section/dieresis/copyright/ordfeminine/guillemotleft/logicalnot\n"
232 "/hyphen/registered/macron/degree/plusminus/twosuperior/threesuperior\n"
233 "/acute/mu/paragraph/periodcentered/cedilla/onesuperior/ordmasculine\n"
234 "/guillemotright/onequarter/onehalf/threequarters/questiondown\n"
235 "/Agrave/Aacute/Acircumflex/Atilde/Adieresis/Aring/AE/Ccedilla\n"
236 "/Egrave/Eacute/Ecircumflex/Edieresis/Igrave/Iacute/Icircumflex\n"
237 "/Idieresis/Eth/Ntilde/Ograve/Oacute/Ocircumflex/Otilde/Odieresis\n"
238 "/multiply/Oslash/Ugrave/Uacute/Ucircumflex/Udieresis/Yacute\n"
239 "/Thorn/germandbls/agrave/aacute/acircumflex/atilde/adieresis\n"
240 "/aring/ae/ccedilla/egrave/eacute/ecircumflex/edieresis/igrave\n"
241 "/iacute/icircumflex/idieresis/eth/ntilde/ograve/oacute/ocircumflex\n"
242 "/otilde/odieresis/divide/oslash/ugrave/uacute/ucircumflex/udieresis\n"
243 "/yacute/thorn/ydieresis\n"
247 //-------------------------------------------------------------------------------
249 //-------------------------------------------------------------------------------
251 IMPLEMENT_DYNAMIC_CLASS(wxPostScriptDC
, wxDC
)
253 float wxPostScriptDC::ms_PSScaleFactor
= 1.0;
255 void wxPostScriptDC::SetResolution(int ppi
)
257 ms_PSScaleFactor
= (float)ppi
/ 72.0;
260 int wxPostScriptDC::GetResolution()
262 return (int)(ms_PSScaleFactor
* 72.0);
265 //-------------------------------------------------------------------------------
267 wxPostScriptDC::wxPostScriptDC ()
269 m_pstream
= (FILE*) NULL
;
279 m_underlinePosition
= 0.0;
280 m_underlineThickness
= 0.0;
282 m_signX
= 1; // default x-axis left to right
283 m_signY
= -1; // default y-axis bottom up -> top down
286 wxPostScriptDC::wxPostScriptDC (const wxPrintData
& printData
)
288 m_pstream
= (FILE*) NULL
;
298 m_underlinePosition
= 0.0;
299 m_underlineThickness
= 0.0;
301 m_signX
= 1; // default x-axis left to right
302 m_signY
= -1; // default y-axis bottom up -> top down
304 m_printData
= printData
;
309 wxPostScriptDC::~wxPostScriptDC ()
314 m_pstream
= (FILE*) NULL
;
318 #if WXWIN_COMPATIBILITY_2_2
319 bool wxPostScriptDC::Create( const wxString
&output
, bool interactive
, wxWindow
*parent
)
322 data
.SetFilename( output
);
323 data
.SetPrintMode( wxPRINT_MODE_FILE
);
327 wxPrintDialogData
ddata( data
);
328 wxPrintDialog
dialog( parent
, &data
);
329 dialog
.GetPrintDialogData().SetSetupDialog(TRUE
);
330 if (dialog
.ShowModal() != wxID_OK
)
335 data
= dialog
.GetPrintDialogData().GetPrintData();
343 bool wxPostScriptDC::Ok() const
348 void wxPostScriptDC::DoSetClippingRegion (wxCoord x
, wxCoord y
, wxCoord w
, wxCoord h
)
350 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
352 if (m_clipping
) DestroyClippingRegion();
354 wxDC::DoSetClippingRegion(x
, y
, w
, h
);
358 PsPrintf( wxT("gsave\n newpath\n")
359 wxT("%d %d moveto\n")
360 wxT("%d %d lineto\n")
361 wxT("%d %d lineto\n")
362 wxT("%d %d lineto\n")
363 wxT("closepath clip newpath\n"),
364 LogicalToDeviceX(x
), LogicalToDeviceY(y
),
365 LogicalToDeviceX(x
+w
), LogicalToDeviceY(y
),
366 LogicalToDeviceX(x
+w
), LogicalToDeviceY(y
+h
),
367 LogicalToDeviceX(x
), LogicalToDeviceY(y
+h
) );
371 void wxPostScriptDC::DestroyClippingRegion()
373 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
378 PsPrint( "grestore\n" );
381 wxDC::DestroyClippingRegion();
384 void wxPostScriptDC::Clear()
386 // This should fail silently to avoid unnecessary
388 // wxFAIL_MSG( wxT("wxPostScriptDC::Clear not implemented.") );
391 bool wxPostScriptDC::DoFloodFill (wxCoord
WXUNUSED(x
), wxCoord
WXUNUSED(y
), const wxColour
&WXUNUSED(col
), int WXUNUSED(style
))
393 wxFAIL_MSG( wxT("wxPostScriptDC::FloodFill not implemented.") );
397 bool wxPostScriptDC::DoGetPixel (wxCoord
WXUNUSED(x
), wxCoord
WXUNUSED(y
), wxColour
* WXUNUSED(col
)) const
399 wxFAIL_MSG( wxT("wxPostScriptDC::GetPixel not implemented.") );
403 void wxPostScriptDC::DoCrossHair (wxCoord
WXUNUSED(x
), wxCoord
WXUNUSED(y
))
405 wxFAIL_MSG( wxT("wxPostScriptDC::CrossHair not implemented.") );
408 void wxPostScriptDC::DoDrawLine (wxCoord x1
, wxCoord y1
, wxCoord x2
, wxCoord y2
)
410 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
412 if (m_pen
.GetStyle() == wxTRANSPARENT
) return;
416 PsPrintf( wxT("newpath\n")
417 wxT("%d %d moveto\n")
418 wxT("%d %d lineto\n")
420 LogicalToDeviceX(x1
), LogicalToDeviceY(y1
),
421 LogicalToDeviceX(x2
), LogicalToDeviceY (y2
) );
423 CalcBoundingBox( x1
, y1
);
424 CalcBoundingBox( x2
, y2
);
427 #define RAD2DEG 57.29577951308
429 void wxPostScriptDC::DoDrawArc (wxCoord x1
, wxCoord y1
, wxCoord x2
, wxCoord y2
, wxCoord xc
, wxCoord yc
)
431 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
433 wxCoord dx
= x1
- xc
;
434 wxCoord dy
= y1
- yc
;
435 wxCoord radius
= (wxCoord
) sqrt( (double)(dx
*dx
+dy
*dy
) );
436 double alpha1
, alpha2
;
438 if (x1
== x2
&& y1
== y2
)
443 else if (radius
== 0.0)
445 alpha1
= alpha2
= 0.0;
449 alpha1
= (x1
- xc
== 0) ?
450 (y1
- yc
< 0) ? 90.0 : -90.0 :
451 -atan2(double(y1
-yc
), double(x1
-xc
)) * RAD2DEG
;
452 alpha2
= (x2
- xc
== 0) ?
453 (y2
- yc
< 0) ? 90.0 : -90.0 :
454 -atan2(double(y2
-yc
), double(x2
-xc
)) * RAD2DEG
;
456 while (alpha1
<= 0) alpha1
+= 360;
457 while (alpha2
<= 0) alpha2
+= 360; // adjust angles to be between
458 while (alpha1
> 360) alpha1
-= 360; // 0 and 360 degree
459 while (alpha2
> 360) alpha2
-= 360;
461 if (m_brush
.GetStyle() != wxTRANSPARENT
)
465 PsPrintf( wxT("newpath\n")
466 wxT("%d %d %d %d %d %d ellipse\n")
467 wxT("%d %d lineto\n")
470 LogicalToDeviceX(xc
), LogicalToDeviceY(yc
), LogicalToDeviceXRel(radius
), LogicalToDeviceYRel(radius
), (wxCoord
)alpha1
, (wxCoord
) alpha2
,
471 LogicalToDeviceX(xc
), LogicalToDeviceY(yc
) );
473 CalcBoundingBox( xc
-radius
, yc
-radius
);
474 CalcBoundingBox( xc
+radius
, yc
+radius
);
477 if (m_pen
.GetStyle() != wxTRANSPARENT
)
481 PsPrintf( wxT("newpath\n")
482 wxT("%d %d %d %d %d %d ellipse\n")
483 wxT("%d %d lineto\n")
486 LogicalToDeviceX(xc
), LogicalToDeviceY(yc
), LogicalToDeviceXRel(radius
), LogicalToDeviceYRel(radius
), (wxCoord
)alpha1
, (wxCoord
) alpha2
,
487 LogicalToDeviceX(xc
), LogicalToDeviceY(yc
) );
489 CalcBoundingBox( xc
-radius
, yc
-radius
);
490 CalcBoundingBox( xc
+radius
, yc
+radius
);
494 void wxPostScriptDC::DoDrawEllipticArc(wxCoord x
,wxCoord y
,wxCoord w
,wxCoord h
,double sa
,double ea
)
496 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
498 if (sa
>=360 || sa
<=-360) sa
=sa
-int(sa
/360)*360;
499 if (ea
>=360 || ea
<=-360) ea
=ea
-int(ea
/360)*360;
505 DrawEllipse(x
,y
,w
,h
);
509 if (m_brush
.GetStyle () != wxTRANSPARENT
)
513 PsPrintf( wxT("newpath\n")
514 wxT("%d %d %d %d %d %d true ellipticarc\n"),
515 LogicalToDeviceX(x
+w
/2), LogicalToDeviceY(y
+h
/2),
516 LogicalToDeviceXRel(w
/2), LogicalToDeviceYRel(h
/2),
517 (wxCoord
)sa
, (wxCoord
)ea
);
519 CalcBoundingBox( x
,y
);
520 CalcBoundingBox( x
+w
, y
+h
);
523 if (m_pen
.GetStyle () != wxTRANSPARENT
)
527 PsPrintf( wxT("newpath\n")
528 wxT("%d %d %d %d %d %d false ellipticarc\n"),
529 LogicalToDeviceX(x
+w
/2), LogicalToDeviceY(y
+h
/2),
530 LogicalToDeviceXRel(w
/2), LogicalToDeviceYRel(h
/2),
531 (wxCoord
)sa
, (wxCoord
)ea
);
533 CalcBoundingBox( x
,y
);
534 CalcBoundingBox( x
+w
, y
+h
);
538 void wxPostScriptDC::DoDrawPoint (wxCoord x
, wxCoord y
)
540 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
542 if (m_pen
.GetStyle() == wxTRANSPARENT
) return;
546 PsPrintf( wxT("newpath\n")
547 wxT("%d %d moveto\n")
548 wxT("%d %d lineto\n")
550 LogicalToDeviceX(x
), LogicalToDeviceY(y
),
551 LogicalToDeviceX(x
+1), LogicalToDeviceY(y
) );
553 CalcBoundingBox( x
, y
);
556 void wxPostScriptDC::DoDrawPolygon (int n
, wxPoint points
[], wxCoord xoffset
, wxCoord yoffset
, int fillStyle
)
558 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
562 if (m_brush
.GetStyle () != wxTRANSPARENT
)
566 PsPrint( "newpath\n" );
568 wxCoord xx
= LogicalToDeviceX(points
[0].x
+ xoffset
);
569 wxCoord yy
= LogicalToDeviceY(points
[0].y
+ yoffset
);
571 PsPrintf( wxT("%d %d moveto\n"), xx
, yy
);
573 CalcBoundingBox( points
[0].x
+ xoffset
, points
[0].y
+ yoffset
);
575 for (int i
= 1; i
< n
; i
++)
577 xx
= LogicalToDeviceX(points
[i
].x
+ xoffset
);
578 yy
= LogicalToDeviceY(points
[i
].y
+ yoffset
);
580 PsPrintf( wxT("%d %d lineto\n"), xx
, yy
);
582 CalcBoundingBox( points
[i
].x
+ xoffset
, points
[i
].y
+ yoffset
);
585 PsPrint( (fillStyle
== wxODDEVEN_RULE
? "eofill\n" : "fill\n") );
588 if (m_pen
.GetStyle () != wxTRANSPARENT
)
592 PsPrint( "newpath\n" );
594 wxCoord xx
= LogicalToDeviceX(points
[0].x
+ xoffset
);
595 wxCoord yy
= LogicalToDeviceY(points
[0].y
+ yoffset
);
597 PsPrintf( wxT("%d %d moveto\n"), xx
, yy
);
599 CalcBoundingBox( points
[0].x
+ xoffset
, points
[0].y
+ yoffset
);
601 for (int i
= 1; i
< n
; i
++)
603 xx
= LogicalToDeviceX(points
[i
].x
+ xoffset
);
604 yy
= LogicalToDeviceY(points
[i
].y
+ yoffset
);
606 PsPrintf( wxT("%d %d lineto\n"), xx
, yy
);
608 CalcBoundingBox( points
[i
].x
+ xoffset
, points
[i
].y
+ yoffset
);
611 PsPrint( "closepath\n" );
612 PsPrint( "stroke\n" );
616 void wxPostScriptDC::DoDrawPolyPolygon (int n
, int start
[], wxPoint points
[], wxCoord xoffset
, wxCoord yoffset
, int fillStyle
)
618 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
622 if (m_brush
.GetStyle () != wxTRANSPARENT
)
626 PsPrint( "newpath\n" );
629 for (int i
= 0; i
< n
; ofs
+= start
[i
++])
631 wxCoord xx
= LogicalToDeviceX(points
[ofs
].x
+ xoffset
);
632 wxCoord yy
= LogicalToDeviceY(points
[ofs
].y
+ yoffset
);
634 PsPrintf( wxT("%d %d moveto\n"), xx
, yy
);
636 CalcBoundingBox( points
[ofs
].x
+ xoffset
, points
[ofs
].y
+ yoffset
);
638 for (int j
= 1; j
< start
[i
]; j
++)
640 xx
= LogicalToDeviceX(points
[ofs
+j
].x
+ xoffset
);
641 yy
= LogicalToDeviceY(points
[ofs
+j
].y
+ yoffset
);
643 PsPrintf( wxT("%d %d lineto\n"), xx
, yy
);
645 CalcBoundingBox( points
[ofs
+j
].x
+ xoffset
, points
[ofs
+j
].y
+ yoffset
);
648 PsPrint( (fillStyle
== wxODDEVEN_RULE
? "eofill\n" : "fill\n") );
651 if (m_pen
.GetStyle () != wxTRANSPARENT
)
655 PsPrint( "newpath\n" );
658 for (int i
= 0; i
< n
; ofs
+= start
[i
++])
660 wxCoord xx
= LogicalToDeviceX(points
[ofs
].x
+ xoffset
);
661 wxCoord yy
= LogicalToDeviceY(points
[ofs
].y
+ yoffset
);
663 PsPrintf( wxT("%d %d moveto\n"), xx
, yy
);
665 CalcBoundingBox( points
[ofs
].x
+ xoffset
, points
[ofs
].y
+ yoffset
);
667 for (int j
= 1; j
< start
[i
]; j
++)
669 xx
= LogicalToDeviceX(points
[ofs
+j
].x
+ xoffset
);
670 yy
= LogicalToDeviceY(points
[ofs
+j
].y
+ yoffset
);
672 PsPrintf( wxT("%d %d lineto\n"), xx
, yy
);
674 CalcBoundingBox( points
[ofs
+j
].x
+ xoffset
, points
[ofs
+j
].y
+ yoffset
);
677 PsPrint( "closepath\n" );
678 PsPrint( "stroke\n" );
682 void wxPostScriptDC::DoDrawLines (int n
, wxPoint points
[], wxCoord xoffset
, wxCoord yoffset
)
684 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
686 if (m_pen
.GetStyle() == wxTRANSPARENT
) return;
693 for ( i
=0; i
<n
; i
++ )
695 CalcBoundingBox( LogicalToDeviceX(points
[i
].x
+xoffset
), LogicalToDeviceY(points
[i
].y
+yoffset
));
698 PsPrintf( wxT("newpath\n")
699 wxT("%d %d moveto\n"),
700 LogicalToDeviceX(points
[0].x
+xoffset
),
701 LogicalToDeviceY(points
[0].y
+yoffset
) );
703 for (i
= 1; i
< n
; i
++)
705 PsPrintf( wxT("%d %d lineto\n"),
706 LogicalToDeviceX(points
[i
].x
+xoffset
),
707 LogicalToDeviceY(points
[i
].y
+yoffset
) );
710 PsPrint( "stroke\n" );
713 void wxPostScriptDC::DoDrawRectangle (wxCoord x
, wxCoord y
, wxCoord width
, wxCoord height
)
715 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
717 if (m_brush
.GetStyle () != wxTRANSPARENT
)
721 PsPrintf( wxT("newpath\n")
722 wxT("%d %d moveto\n")
723 wxT("%d %d lineto\n")
724 wxT("%d %d lineto\n")
725 wxT("%d %d lineto\n")
728 LogicalToDeviceX(x
), LogicalToDeviceY(y
),
729 LogicalToDeviceX(x
+ width
), LogicalToDeviceY(y
),
730 LogicalToDeviceX(x
+ width
), LogicalToDeviceY(y
+ height
),
731 LogicalToDeviceX(x
), LogicalToDeviceY(y
+ height
) );
733 CalcBoundingBox( x
, y
);
734 CalcBoundingBox( x
+ width
, y
+ height
);
737 if (m_pen
.GetStyle () != wxTRANSPARENT
)
741 PsPrintf( wxT("newpath\n")
742 wxT("%d %d moveto\n")
743 wxT("%d %d lineto\n")
744 wxT("%d %d lineto\n")
745 wxT("%d %d lineto\n")
748 LogicalToDeviceX(x
), LogicalToDeviceY(y
),
749 LogicalToDeviceX(x
+ width
), LogicalToDeviceY(y
),
750 LogicalToDeviceX(x
+ width
), LogicalToDeviceY(y
+ height
),
751 LogicalToDeviceX(x
), LogicalToDeviceY(y
+ height
) );
753 CalcBoundingBox( x
, y
);
754 CalcBoundingBox( x
+ width
, y
+ height
);
758 void wxPostScriptDC::DoDrawRoundedRectangle (wxCoord x
, wxCoord y
, wxCoord width
, wxCoord height
, double radius
)
760 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
764 // Now, a negative radius is interpreted to mean
765 // 'the proportion of the smallest X or Y dimension'
766 double smallest
= width
< height
? width
: height
;
767 radius
= (-radius
* smallest
);
770 wxCoord rad
= (wxCoord
) radius
;
772 if (m_brush
.GetStyle () != wxTRANSPARENT
)
776 /* Draw rectangle anticlockwise */
777 PsPrintf( wxT("newpath\n")
778 wxT("%d %d %d 90 180 arc\n")
779 wxT("%d %d moveto\n")
780 wxT("%d %d %d 180 270 arc\n")
781 wxT("%d %d lineto\n")
782 wxT("%d %d %d 270 0 arc\n")
783 wxT("%d %d lineto\n")
784 wxT("%d %d %d 0 90 arc\n")
785 wxT("%d %d lineto\n")
788 LogicalToDeviceX(x
+ rad
), LogicalToDeviceY(y
+ rad
), LogicalToDeviceXRel(rad
),
789 LogicalToDeviceX(x
), LogicalToDeviceY(y
+ rad
),
790 LogicalToDeviceX(x
+ rad
), LogicalToDeviceY(y
+ height
- rad
), LogicalToDeviceXRel(rad
),
791 LogicalToDeviceX(x
+ width
- rad
), LogicalToDeviceY(y
+ height
),
792 LogicalToDeviceX(x
+ width
- rad
), LogicalToDeviceY(y
+ height
- rad
), LogicalToDeviceXRel(rad
),
793 LogicalToDeviceX(x
+ width
), LogicalToDeviceY(y
+ rad
),
794 LogicalToDeviceX(x
+ width
- rad
), LogicalToDeviceY(y
+ rad
), LogicalToDeviceXRel(rad
),
795 LogicalToDeviceX(x
+ rad
), LogicalToDeviceY(y
) );
797 CalcBoundingBox( x
, y
);
798 CalcBoundingBox( x
+ width
, y
+ height
);
801 if (m_pen
.GetStyle () != wxTRANSPARENT
)
805 /* Draw rectangle anticlockwise */
806 PsPrintf( wxT("newpath\n")
807 wxT("%d %d %d 90 180 arc\n")
808 wxT("%d %d moveto\n")
809 wxT("%d %d %d 180 270 arc\n")
810 wxT("%d %d lineto\n")
811 wxT("%d %d %d 270 0 arc\n")
812 wxT("%d %d lineto\n")
813 wxT("%d %d %d 0 90 arc\n")
814 wxT("%d %d lineto\n")
817 LogicalToDeviceX(x
+ rad
), LogicalToDeviceY(y
+ rad
), LogicalToDeviceXRel(rad
),
818 LogicalToDeviceX(x
), LogicalToDeviceY(y
+ rad
),
819 LogicalToDeviceX(x
+ rad
), LogicalToDeviceY(y
+ height
- rad
), LogicalToDeviceXRel(rad
),
820 LogicalToDeviceX(x
+ width
- rad
), LogicalToDeviceY(y
+ height
),
821 LogicalToDeviceX(x
+ width
- rad
), LogicalToDeviceY(y
+ height
- rad
), LogicalToDeviceXRel(rad
),
822 LogicalToDeviceX(x
+ width
), LogicalToDeviceY(y
+ rad
),
823 LogicalToDeviceX(x
+ width
- rad
), LogicalToDeviceY(y
+ rad
), LogicalToDeviceXRel(rad
),
824 LogicalToDeviceX(x
+ rad
), LogicalToDeviceY(y
) );
826 CalcBoundingBox( x
, y
);
827 CalcBoundingBox( x
+ width
, y
+ height
);
831 void wxPostScriptDC::DoDrawEllipse (wxCoord x
, wxCoord y
, wxCoord width
, wxCoord height
)
833 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
835 if (m_brush
.GetStyle () != wxTRANSPARENT
)
839 PsPrintf( wxT("newpath\n")
840 wxT("%d %d %d %d 0 360 ellipse\n")
842 LogicalToDeviceX(x
+ width
/ 2), LogicalToDeviceY(y
+ height
/ 2),
843 LogicalToDeviceXRel(width
/ 2), LogicalToDeviceYRel(height
/ 2) );
845 CalcBoundingBox( x
- width
, y
- height
);
846 CalcBoundingBox( x
+ width
, y
+ height
);
849 if (m_pen
.GetStyle () != wxTRANSPARENT
)
853 PsPrintf( wxT("newpath\n")
854 wxT("%d %d %d %d 0 360 ellipse\n")
856 LogicalToDeviceX(x
+ width
/ 2), LogicalToDeviceY(y
+ height
/ 2),
857 LogicalToDeviceXRel(width
/ 2), LogicalToDeviceYRel(height
/ 2) );
859 CalcBoundingBox( x
- width
, y
- height
);
860 CalcBoundingBox( x
+ width
, y
+ height
);
864 void wxPostScriptDC::DoDrawIcon( const wxIcon
& icon
, wxCoord x
, wxCoord y
)
866 DrawBitmap( icon
, x
, y
, TRUE
);
869 /* this has to be char, not wxChar */
870 static char hexArray
[] = "0123456789ABCDEF";
872 void wxPostScriptDC::DoDrawBitmap( const wxBitmap
& bitmap
, wxCoord x
, wxCoord y
, bool WXUNUSED(useMask
) )
874 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
876 if (!bitmap
.Ok()) return;
878 wxImage image
= bitmap
.ConvertToImage();
880 if (!image
.Ok()) return;
882 wxCoord w
= image
.GetWidth();
883 wxCoord h
= image
.GetHeight();
885 wxCoord ww
= LogicalToDeviceXRel(image
.GetWidth());
886 wxCoord hh
= LogicalToDeviceYRel(image
.GetHeight());
888 wxCoord xx
= LogicalToDeviceX(x
);
889 wxCoord yy
= LogicalToDeviceY(y
+ bitmap
.GetHeight());
891 PsPrintf( wxT("/origstate save def\n")
892 wxT("20 dict begin\n")
893 wxT("/pix %d string def\n")
894 wxT("/grays %d string def\n")
895 wxT("/npixels 0 def\n")
896 wxT("/rgbindx 0 def\n")
897 wxT("%d %d translate\n")
900 wxT("[%d 0 0 %d 0 %d]\n")
901 wxT("{currentfile pix readhexstring pop}\n")
902 wxT("false 3 colorimage\n"),
903 w
, w
, xx
, yy
, ww
, hh
, w
, h
, w
, -h
, h
);
905 unsigned char* data
= image
.GetData();
907 /* buffer = line = width*rgb(3)*hexa(2)+'\n'(1)+null(1) */
908 char* buffer
= new char[ w
*6+2 ];
909 int firstDigit
, secondDigit
;
912 for (int j
= 0; j
< h
; j
++)
914 char* bufferindex
= buffer
;
917 for (int i
= 0; i
< w
*3; i
++)
919 firstDigit
= (int)(*data
/16.0);
920 secondDigit
= (int)(*data
- (firstDigit
*16.0));
921 *(bufferindex
++) = hexArray
[firstDigit
];
922 *(bufferindex
++) = hexArray
[secondDigit
];
926 *(bufferindex
++) = '\n';
932 PsPrint( "origstate restore\n" );
935 void wxPostScriptDC::SetFont( const wxFont
& font
)
937 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
939 if (!font
.Ok()) return;
945 int Style
= m_font
.GetStyle();
946 int Weight
= m_font
.GetWeight();
949 switch (m_font
.GetFamily())
954 if (Style
== wxITALIC
)
956 if (Weight
== wxBOLD
)
957 name
= "/Courier-BoldOblique";
959 name
= "/Courier-Oblique";
963 if (Weight
== wxBOLD
)
964 name
= "/Courier-Bold";
972 if (Style
== wxITALIC
)
974 if (Weight
== wxBOLD
)
975 name
= "/Times-BoldItalic";
977 name
= "/Times-Italic";
981 if (Weight
== wxBOLD
)
982 name
= "/Times-Bold";
984 name
= "/Times-Roman";
990 name
= "/ZapfChancery-MediumItalic";
996 if (Style
== wxITALIC
)
998 if (Weight
== wxBOLD
)
999 name
= "/Helvetica-BoldOblique";
1001 name
= "/Helvetica-Oblique";
1005 if (Weight
== wxBOLD
)
1006 name
= "/Helvetica-Bold";
1008 name
= "/Helvetica";
1015 PsPrint( " reencodeISO def\n" );
1017 PsPrint( " findfont\n" );
1020 sprintf( buffer
, "%f scalefont setfont\n", LogicalToDeviceYRel(m_font
.GetPointSize() * 1000) / 1000.0F
);
1021 // this is a hack - we must scale font size (in pts) according to m_scaleY but
1022 // LogicalToDeviceYRel works with wxCoord type (int or longint). Se we first convert font size
1023 // to 1/1000th of pt and then back.
1024 for (int i
= 0; i
< 100; i
++)
1025 if (buffer
[i
] == ',') buffer
[i
] = '.';
1027 #endif // !wxUSE_PANGO
1030 void wxPostScriptDC::SetPen( const wxPen
& pen
)
1032 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
1034 if (!pen
.Ok()) return;
1036 int oldStyle
= m_pen
.GetStyle();
1041 sprintf( buffer
, "%f setlinewidth\n", LogicalToDeviceXRel(1000 * m_pen
.GetWidth()) / 1000.0f
);
1042 for (int i
= 0; i
< 100; i
++)
1043 if (buffer
[i
] == ',') buffer
[i
] = '.';
1047 Line style - WRONG: 2nd arg is OFFSET
1049 Here, I'm afraid you do not conceive meaning of parameters of 'setdash'
1050 operator correctly. You should look-up this in the Red Book: the 2nd parame-
1051 ter is not number of values in the array of the first one, but an offset
1052 into this description of the pattern. I mean a real *offset* not index
1053 into array. I.e. If the command is [3 4] 1 setdash is used, then there
1054 will be first black line *2* units wxCoord, then space 4 units, then the
1055 pattern of *3* units black, 4 units space will be repeated.
1058 static const char *dotted
= "[2 5] 2";
1059 static const char *short_dashed
= "[4 4] 2";
1060 static const char *wxCoord_dashed
= "[4 8] 2";
1061 static const char *dotted_dashed
= "[6 6 2 6] 4";
1065 switch (m_pen
.GetStyle())
1067 case wxDOT
: psdash
= dotted
; break;
1068 case wxSHORT_DASH
: psdash
= short_dashed
; break;
1069 case wxLONG_DASH
: psdash
= wxCoord_dashed
; break;
1070 case wxDOT_DASH
: psdash
= dotted_dashed
; break;
1073 default: psdash
= "[] 0"; break;
1076 if ( (oldStyle
!= m_pen
.GetStyle()) )
1079 PsPrint( " setdash\n" );
1083 unsigned char red
= m_pen
.GetColour().Red();
1084 unsigned char blue
= m_pen
.GetColour().Blue();
1085 unsigned char green
= m_pen
.GetColour().Green();
1089 // Anything not white is black
1090 if (! (red
== (unsigned char) 255 &&
1091 blue
== (unsigned char) 255 &&
1092 green
== (unsigned char) 255) )
1094 red
= (unsigned char) 0;
1095 green
= (unsigned char) 0;
1096 blue
= (unsigned char) 0;
1101 if (!(red
== m_currentRed
&& green
== m_currentGreen
&& blue
== m_currentBlue
))
1103 double redPS
= (double)(red
) / 255.0;
1104 double bluePS
= (double)(blue
) / 255.0;
1105 double greenPS
= (double)(green
) / 255.0;
1109 "%.8f %.8f %.8f setrgbcolor\n",
1110 redPS
, greenPS
, bluePS
);
1111 for (int i
= 0; i
< 100; i
++)
1112 if (buffer
[i
] == ',') buffer
[i
] = '.';
1117 m_currentBlue
= blue
;
1118 m_currentGreen
= green
;
1122 void wxPostScriptDC::SetBrush( const wxBrush
& brush
)
1124 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
1126 if (!brush
.Ok()) return;
1131 unsigned char red
= m_brush
.GetColour().Red();
1132 unsigned char blue
= m_brush
.GetColour().Blue();
1133 unsigned char green
= m_brush
.GetColour().Green();
1137 // Anything not white is black
1138 if (! (red
== (unsigned char) 255 &&
1139 blue
== (unsigned char) 255 &&
1140 green
== (unsigned char) 255) )
1142 red
= (unsigned char) 0;
1143 green
= (unsigned char) 0;
1144 blue
= (unsigned char) 0;
1149 if (!(red
== m_currentRed
&& green
== m_currentGreen
&& blue
== m_currentBlue
))
1151 double redPS
= (double)(red
) / 255.0;
1152 double bluePS
= (double)(blue
) / 255.0;
1153 double greenPS
= (double)(green
) / 255.0;
1157 "%.8f %.8f %.8f setrgbcolor\n",
1158 redPS
, greenPS
, bluePS
);
1159 for (int i
= 0; i
< 100; i
++)
1160 if (buffer
[i
] == ',') buffer
[i
] = '.';
1165 m_currentBlue
= blue
;
1166 m_currentGreen
= green
;
1172 #define PANGO_ENABLE_ENGINE
1175 #include "wx/gtk/private.h"
1176 #include "gtk/gtk.h"
1178 #include "wx/x11/private.h"
1181 #include "wx/fontutil.h"
1182 #include <pango/pangoft2.h>
1183 #include <freetype/ftglyph.h>
1185 #ifndef FT_Outline_Decompose
1186 FT_EXPORT( FT_Error
) FT_Outline_Decompose(
1187 FT_Outline
* outline
,
1188 const FT_Outline_Funcs
* interface
,
1192 typedef struct _OutlineInfo OutlineInfo
;
1193 struct _OutlineInfo
{
1194 wxPostScriptDC
* caller
;
1197 static int paps_move_to( FT_Vector
* to
, void *user_data
)
1199 OutlineInfo
*outline_info
= (OutlineInfo
*)user_data
;
1200 outline_info
->caller
->PsPrintf( wxT("%d %d moveto\n"), (int)to
->x
, (int)to
->y
);
1204 static int paps_line_to( FT_Vector
* to
, void *user_data
)
1206 OutlineInfo
*outline_info
= (OutlineInfo
*)user_data
;
1207 outline_info
->caller
->PsPrintf( wxT("%d %d lineto\n"), (int)to
->x
, (int)to
->y
);
1211 static int paps_conic_to( FT_Vector
* control
, FT_Vector
* to
, void *user_data
)
1213 OutlineInfo
*outline_info
= (OutlineInfo
*)user_data
;
1214 outline_info
->caller
->PsPrintf( wxT("%d %d %d %d conicto\n"),
1223 paps_cubic_to( FT_Vector
* control1
, FT_Vector
* control2
,
1224 FT_Vector
* to
, void *user_data
)
1226 OutlineInfo
*outline_info
= (OutlineInfo
*)user_data
;
1227 outline_info
->caller
->PsPrintf(wxT("%d %d %d %d %d %d curveto\n"),
1237 void draw_bezier_outline(wxPostScriptDC
* caller
,
1239 FT_UInt glyph_index
,
1245 FT_Int load_flags
= FT_LOAD_NO_BITMAP
;
1248 FT_Outline_Funcs outlinefunc
=
1256 OutlineInfo outline_info
;
1257 outline_info
.caller
= caller
;
1259 caller
->PsPrint("gsave\n");
1260 caller
->PsPrintf( wxT("%d %d translate\n"), pos_x
, pos_y
);
1262 // We have to replace the "," from the German
1263 // locale with the Englich "." for PostScript
1265 sprintf(buf
, "%.8f %.8f scale\n", scale_x
, scale_y
);
1266 for (size_t i
= 0; i
< strlen(buf
); i
++)
1267 if (buf
[i
] == ',') buf
[i
] = '.';
1268 caller
->PsPrint(buf
);
1270 FT_Load_Glyph(face
, glyph_index
, load_flags
);
1271 FT_Get_Glyph (face
->glyph
, &glyph
);
1272 FT_Outline_Decompose (&(((FT_OutlineGlyph
)glyph
)->outline
),
1273 &outlinefunc
, &outline_info
);
1274 caller
->PsPrint("closepath fill grestore\n");
1276 FT_Done_Glyph (glyph
);
1281 void wxPostScriptDC::DoDrawText( const wxString
& text
, wxCoord x
, wxCoord y
)
1283 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
1285 if (m_textForegroundColour
.Ok())
1287 unsigned char red
= m_textForegroundColour
.Red();
1288 unsigned char blue
= m_textForegroundColour
.Blue();
1289 unsigned char green
= m_textForegroundColour
.Green();
1293 // Anything not white is black
1294 if (! (red
== (unsigned char) 255 &&
1295 blue
== (unsigned char) 255 &&
1296 green
== (unsigned char) 255))
1298 red
= (unsigned char) 0;
1299 green
= (unsigned char) 0;
1300 blue
= (unsigned char) 0;
1304 // maybe setgray here ?
1305 if (!(red
== m_currentRed
&& green
== m_currentGreen
&& blue
== m_currentBlue
))
1307 double redPS
= (double)(red
) / 255.0;
1308 double bluePS
= (double)(blue
) / 255.0;
1309 double greenPS
= (double)(green
) / 255.0;
1313 "%.8f %.8f %.8f setrgbcolor\n",
1314 redPS
, greenPS
, bluePS
);
1315 for (size_t i
= 0; i
< strlen(buffer
); i
++)
1316 if (buffer
[i
] == ',') buffer
[i
] = '.';
1320 m_currentBlue
= blue
;
1321 m_currentGreen
= green
;
1327 int pango_dpi
= 600;
1328 PangoContext
*context
= pango_ft2_get_context ( pango_dpi
, pango_dpi
);
1330 double scale
= (double)pango_dpi
/ (double)ps_dpi
;
1331 scale
/= m_userScaleY
;
1333 pango_context_set_language (context
, pango_language_from_string ("en_US"));
1334 pango_context_set_base_dir (context
, PANGO_DIRECTION_LTR
);
1336 pango_context_set_font_description (context
, m_font
.GetNativeFontInfo()->description
);
1338 PangoLayout
*layout
= pango_layout_new (context
);
1340 wxCharBuffer buffer
= wxConvUTF8
.cWC2MB( text
);
1342 wxCharBuffer buffer
= wxConvUTF8
.cWC2MB( wxConvLocal
.cWX2WC( text
) );
1344 pango_layout_set_text( layout
, (const char*) buffer
, strlen(buffer
) );
1346 PsPrintf( wxT("%%%% %s\n"), text
.c_str() );
1348 PangoRectangle rect
;
1349 pango_layout_get_extents(layout
, NULL
, &rect
);
1351 int xx
= LogicalToDeviceX( x
);
1352 int yy
= LogicalToDeviceY( y
);
1354 int xxx
= xx
* PANGO_SCALE
;
1355 int yyy
= yy
* PANGO_SCALE
- (int)(rect
.height
* 0.66 / scale
); // Move down by estimated baseline. HACK.
1357 #define ps_kludge_factor 2.8
1359 // Loop over lines in layout
1360 int num_lines
= pango_layout_get_line_count( layout
);
1361 for (int i
= 0; i
< num_lines
; i
++)
1363 PangoLayoutLine
*line
= pango_layout_get_line( layout
, i
);
1365 // width of glyphs already printed
1368 // Loop over runs in line
1369 GSList
*runs_list
= line
->runs
;
1372 PangoLayoutRun
*run
= (PangoLayoutRun
*) runs_list
->data
;
1373 PangoItem
*item
= run
->item
;
1374 PangoGlyphString
*glyphs
= run
->glyphs
;
1375 PangoAnalysis
*analysis
= &item
->analysis
;
1376 PangoFont
*font
= analysis
->font
;
1377 FT_Face ft_face
= pango_ft2_font_get_face(font
);
1379 int num_glyphs
= glyphs
->num_glyphs
;
1380 for (int glyph_idx
= 0; glyph_idx
< num_glyphs
; glyph_idx
++)
1382 PangoGlyphGeometry geometry
= glyphs
->glyphs
[glyph_idx
].geometry
;
1383 int pos_x
= xxx
+ (int)((double)(all_width
+geometry
.x_offset
) / scale
);
1384 int pos_y
= yyy
+ (int)((double)geometry
.y_offset
/ scale
);
1385 all_width
+= geometry
.width
;
1387 draw_bezier_outline( this, ft_face
,
1388 (FT_UInt
)(glyphs
->glyphs
[glyph_idx
].glyph
),
1389 pos_x
/ PANGO_SCALE
,
1390 pos_y
/ PANGO_SCALE
,
1391 1.0/(ps_kludge_factor
* scale
* 26.6),
1392 1.0/(ps_kludge_factor
* scale
* 26.6) );
1394 runs_list
= runs_list
->next
;
1398 g_object_unref( G_OBJECT( layout
) );
1399 g_object_unref( G_OBJECT( context
) );
1400 #else // !wxUSE_PANGO
1401 wxCoord text_w
, text_h
, text_descent
;
1403 GetTextExtent(text
, &text_w
, &text_h
, &text_descent
);
1405 // VZ: this seems to be unnecessary, so taking it out for now, if it
1406 // doesn't create any problems, remove this comment entirely
1407 //SetFont( m_font );
1410 int size
= m_font
.GetPointSize();
1412 // wxCoord by = y + (wxCoord)floor( double(size) * 2.0 / 3.0 ); // approximate baseline
1413 // commented by V. Slavik and replaced by accurate version
1414 // - note that there is still rounding error in text_descent!
1415 wxCoord by
= y
+ size
- text_descent
; // baseline
1417 PsPrintf( wxT("%d %d moveto\n"), LogicalToDeviceX(x
), LogicalToDeviceY(by
) );
1420 const wxWX2MBbuf textbuf
= text
.mb_str();
1421 size_t len
= strlen(textbuf
);
1423 for (i
= 0; i
< len
; i
++)
1425 int c
= (unsigned char) textbuf
[i
];
1426 if (c
== ')' || c
== '(' || c
== '\\')
1428 /* Cope with special characters */
1432 else if ( c
>= 128 )
1434 /* Cope with character codes > 127 */
1435 PsPrintf( wxT("\\%o"), c
);
1443 PsPrint( ") show\n" );
1445 if (m_font
.GetUnderlined())
1447 wxCoord uy
= (wxCoord
)(y
+ size
- m_underlinePosition
);
1457 LogicalToDeviceX(x
), LogicalToDeviceY(uy
),
1458 m_underlineThickness
,
1459 LogicalToDeviceX(x
+ text_w
), LogicalToDeviceY(uy
) );
1460 for (i
= 0; i
< 100; i
++)
1461 if (buffer
[i
] == ',') buffer
[i
] = '.';
1465 CalcBoundingBox( x
, y
);
1466 CalcBoundingBox( x
+ size
* text
.Length() * 2/3 , y
);
1467 #endif // wxUSE_PANGO/!wxUSE_PANGO
1470 void wxPostScriptDC::DoDrawRotatedText( const wxString
& text
, wxCoord x
, wxCoord y
, double angle
)
1474 DoDrawText(text
, x
, y
);
1478 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
1482 if (m_textForegroundColour
.Ok())
1484 unsigned char red
= m_textForegroundColour
.Red();
1485 unsigned char blue
= m_textForegroundColour
.Blue();
1486 unsigned char green
= m_textForegroundColour
.Green();
1490 // Anything not white is black
1491 if (! (red
== (unsigned char) 255 &&
1492 blue
== (unsigned char) 255 &&
1493 green
== (unsigned char) 255))
1495 red
= (unsigned char) 0;
1496 green
= (unsigned char) 0;
1497 blue
= (unsigned char) 0;
1501 // maybe setgray here ?
1502 if (!(red
== m_currentRed
&& green
== m_currentGreen
&& blue
== m_currentBlue
))
1504 double redPS
= (double)(red
) / 255.0;
1505 double bluePS
= (double)(blue
) / 255.0;
1506 double greenPS
= (double)(green
) / 255.0;
1510 "%.8f %.8f %.8f setrgbcolor\n",
1511 redPS
, greenPS
, bluePS
);
1512 for (int i
= 0; i
< 100; i
++)
1513 if (buffer
[i
] == ',') buffer
[i
] = '.';
1517 m_currentBlue
= blue
;
1518 m_currentGreen
= green
;
1522 int size
= m_font
.GetPointSize();
1524 PsPrintf( wxT("%d %d moveto\n"),
1525 LogicalToDeviceX(x
), LogicalToDeviceY(y
));
1528 sprintf(buffer
, "%.8f rotate\n", angle
);
1530 for (i
= 0; i
< 100; i
++)
1532 if (buffer
[i
] == ',') buffer
[i
] = '.';
1537 const wxWX2MBbuf textbuf
= text
.mb_str();
1538 size_t len
= strlen(textbuf
);
1539 for (i
= 0; i
< len
; i
++)
1541 int c
= (unsigned char) textbuf
[i
];
1542 if (c
== ')' || c
== '(' || c
== '\\')
1544 /* Cope with special characters */
1548 else if ( c
>= 128 )
1550 /* Cope with character codes > 127 */
1551 PsPrintf( wxT("\\%o"), c
);
1559 PsPrint( ") show\n" );
1561 sprintf( buffer
, "%.8f rotate\n", -angle
);
1562 for (i
= 0; i
< 100; i
++)
1564 if (buffer
[i
] == ',') buffer
[i
] = '.';
1568 if (m_font
.GetUnderlined())
1570 wxCoord uy
= (wxCoord
)(y
+ size
- m_underlinePosition
);
1573 GetTextExtent(text
, &w
, &h
);
1582 LogicalToDeviceX(x
), LogicalToDeviceY(uy
),
1583 m_underlineThickness
,
1584 LogicalToDeviceX(x
+ w
), LogicalToDeviceY(uy
) );
1585 for (i
= 0; i
< 100; i
++)
1587 if (buffer
[i
] == ',') buffer
[i
] = '.';
1592 CalcBoundingBox( x
, y
);
1593 CalcBoundingBox( x
+ size
* text
.Length() * 2/3 , y
);
1596 void wxPostScriptDC::SetBackground (const wxBrush
& brush
)
1598 m_backgroundBrush
= brush
;
1601 void wxPostScriptDC::SetLogicalFunction (int WXUNUSED(function
))
1603 wxFAIL_MSG( wxT("wxPostScriptDC::SetLogicalFunction not implemented.") );
1606 void wxPostScriptDC::DoDrawSpline( wxList
*points
)
1608 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
1612 // a and b are not used
1614 double c
, d
, x1
, y1
, x2
, y2
, x3
, y3
;
1617 wxList::compatibility_iterator node
= points
->GetFirst();
1618 p
= (wxPoint
*)node
->GetData();
1622 node
= node
->GetNext();
1623 p
= (wxPoint
*)node
->GetData();
1630 (double)(x1
+ c
) / 2;
1635 (double)(y1
+ d
) / 2;
1637 PsPrintf( wxT("newpath\n")
1638 wxT("%d %d moveto\n")
1639 wxT("%d %d lineto\n"),
1640 LogicalToDeviceX((wxCoord
)x1
), LogicalToDeviceY((wxCoord
)y1
),
1641 LogicalToDeviceX((wxCoord
)x3
), LogicalToDeviceY((wxCoord
)y3
) );
1643 CalcBoundingBox( (wxCoord
)x1
, (wxCoord
)y1
);
1644 CalcBoundingBox( (wxCoord
)x3
, (wxCoord
)y3
);
1646 node
= node
->GetNext();
1649 q
= (wxPoint
*)node
->GetData();
1657 x3
= (double)(x2
+ c
) / 2;
1658 y3
= (double)(y2
+ d
) / 2;
1660 PsPrintf( wxT("%d %d %d %d %d %d DrawSplineSection\n"),
1661 LogicalToDeviceX((wxCoord
)x1
), LogicalToDeviceY((wxCoord
)y1
),
1662 LogicalToDeviceX((wxCoord
)x2
), LogicalToDeviceY((wxCoord
)y2
),
1663 LogicalToDeviceX((wxCoord
)x3
), LogicalToDeviceY((wxCoord
)y3
) );
1665 CalcBoundingBox( (wxCoord
)x1
, (wxCoord
)y1
);
1666 CalcBoundingBox( (wxCoord
)x3
, (wxCoord
)y3
);
1668 node
= node
->GetNext();
1672 At this point, (x2,y2) and (c,d) are the position of the
1673 next-to-last and last point respectively, in the point list
1676 PsPrintf( wxT("%d %d lineto\n")
1678 LogicalToDeviceX((wxCoord
)c
), LogicalToDeviceY((wxCoord
)d
) );
1681 wxCoord
wxPostScriptDC::GetCharWidth() const
1683 // Chris Breeze: reasonable approximation using wxMODERN/Courier
1684 return (wxCoord
) (GetCharHeight() * 72.0 / 120.0);
1688 void wxPostScriptDC::SetAxisOrientation( bool xLeftRight
, bool yBottomUp
)
1690 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
1692 m_signX
= (xLeftRight
? 1 : -1);
1693 m_signY
= (yBottomUp
? 1 : -1);
1695 // FIXME there is no such function in MSW nor in OS2/PM
1696 #if !defined(__WXMSW__) && !defined(__WXPM__)
1697 ComputeScaleAndOrigin();
1701 void wxPostScriptDC::SetDeviceOrigin( wxCoord x
, wxCoord y
)
1703 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
1709 wxDC::SetDeviceOrigin( x
, h
-y
);
1712 void wxPostScriptDC::DoGetSize(int* width
, int* height
) const
1714 wxPaperSize id
= m_printData
.GetPaperId();
1716 wxPrintPaperType
*paper
= wxThePrintPaperDatabase
->FindPaperType(id
);
1718 if (!paper
) paper
= wxThePrintPaperDatabase
->FindPaperType(wxPAPER_A4
);
1724 w
= paper
->GetSizeDeviceUnits().x
;
1725 h
= paper
->GetSizeDeviceUnits().y
;
1728 if (m_printData
.GetOrientation() == wxLANDSCAPE
)
1735 if (width
) *width
= (int)(w
* ms_PSScaleFactor
);
1736 if (height
) *height
= (int)(h
* ms_PSScaleFactor
);
1739 void wxPostScriptDC::DoGetSizeMM(int *width
, int *height
) const
1741 wxPaperSize id
= m_printData
.GetPaperId();
1743 wxPrintPaperType
*paper
= wxThePrintPaperDatabase
->FindPaperType(id
);
1745 if (!paper
) paper
= wxThePrintPaperDatabase
->FindPaperType(wxPAPER_A4
);
1751 w
= paper
->GetWidth() / 10;
1752 h
= paper
->GetHeight() / 10;
1755 if (m_printData
.GetOrientation() == wxLANDSCAPE
)
1762 if (width
) *width
= w
;
1763 if (height
) *height
= h
;
1766 // Resolution in pixels per logical inch
1767 wxSize
wxPostScriptDC::GetPPI(void) const
1769 return wxSize((int)(72 * ms_PSScaleFactor
),
1770 (int)(72 * ms_PSScaleFactor
));
1774 bool wxPostScriptDC::StartDoc( const wxString
& message
)
1776 wxCHECK_MSG( m_ok
, FALSE
, wxT("invalid postscript dc") );
1778 if ( m_printData
.GetPrintMode() == wxPRINT_MODE_FILE
)
1780 if (m_printData
.GetFilename() == wxT(""))
1782 wxString filename
= wxGetTempFileName( wxT("ps") );
1783 m_printData
.SetFilename(filename
);
1786 // FIXME: use fn_str() here under Unicode?
1787 m_pstream
= wxFopen( m_printData
.GetFilename().c_str(), wxT("w+") );
1791 wxLogError( _("Cannot open file for PostScript printing!"));
1800 PsPrint( "%!PS-Adobe-2.0\n" );
1801 PsPrintf( wxT("%%%%Title: %s\n"), m_title
.c_str() );
1802 PsPrint( "%%Creator: wxWindows PostScript renderer\n" );
1803 PsPrintf( wxT("%%%%CreationDate: %s\n"), wxNow().c_str() );
1804 if (m_printData
.GetOrientation() == wxLANDSCAPE
)
1805 PsPrint( "%%Orientation: Landscape\n" );
1807 PsPrint( "%%Orientation: Portrait\n" );
1809 // PsPrintf( wxT("%%%%Pages: %d\n"), (wxPageNumber - 1) );
1811 const wxChar
*paper
;
1812 switch (m_printData
.GetPaperId())
1814 case wxPAPER_LETTER
: paper
= wxT("Letter"); break; // Letter: paper ""; 8 1/2 by 11 inches
1815 case wxPAPER_LEGAL
: paper
= wxT("Legal"); break; // Legal, 8 1/2 by 14 inches
1816 case wxPAPER_A4
: paper
= wxT("A4"); break; // A4 Sheet, 210 by 297 millimeters
1817 case wxPAPER_TABLOID
: paper
= wxT("Tabloid"); break; // Tabloid, 11 by 17 inches
1818 case wxPAPER_LEDGER
: paper
= wxT("Ledger"); break; // Ledger, 17 by 11 inches
1819 case wxPAPER_STATEMENT
: paper
= wxT("Statement"); break; // Statement, 5 1/2 by 8 1/2 inches
1820 case wxPAPER_EXECUTIVE
: paper
= wxT("Executive"); break; // Executive, 7 1/4 by 10 1/2 inches
1821 case wxPAPER_A3
: paper
= wxT("A3"); break; // A3 sheet, 297 by 420 millimeters
1822 case wxPAPER_A5
: paper
= wxT("A5"); break; // A5 sheet, 148 by 210 millimeters
1823 case wxPAPER_B4
: paper
= wxT("B4"); break; // B4 sheet, 250 by 354 millimeters
1824 case wxPAPER_B5
: paper
= wxT("B5"); break; // B5 sheet, 182-by-257-millimeter paper
1825 case wxPAPER_FOLIO
: paper
= wxT("Folio"); break; // Folio, 8-1/2-by-13-inch paper
1826 case wxPAPER_QUARTO
: paper
= wxT("Quaro"); break; // Quarto, 215-by-275-millimeter paper
1827 case wxPAPER_10X14
: paper
= wxT("10x14"); break; // 10-by-14-inch sheet
1828 default: paper
= wxT("A4");
1830 PsPrintf( wxT("%%%%DocumentPaperSizes: %s\n"), paper
);
1831 PsPrint( "%%EndComments\n\n" );
1833 PsPrint( "%%BeginProlog\n" );
1834 PsPrint( wxPostScriptHeaderConicTo
);
1835 PsPrint( wxPostScriptHeaderEllipse
);
1836 PsPrint( wxPostScriptHeaderEllipticArc
);
1837 PsPrint( wxPostScriptHeaderColourImage
);
1840 PsPrint( wxPostScriptHeaderReencodeISO1
);
1841 PsPrint( wxPostScriptHeaderReencodeISO2
);
1843 if (wxPostScriptHeaderSpline
)
1844 PsPrint( wxPostScriptHeaderSpline
);
1845 PsPrint( "%%EndProlog\n" );
1847 SetBrush( *wxBLACK_BRUSH
);
1848 SetPen( *wxBLACK_PEN
);
1849 SetBackground( *wxWHITE_BRUSH
);
1850 SetTextForeground( *wxBLACK
);
1852 // set origin according to paper size
1853 SetDeviceOrigin( 0,0 );
1860 void wxPostScriptDC::EndDoc ()
1862 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
1867 PsPrint( "grestore\n" );
1871 fclose( m_pstream
);
1872 m_pstream
= (FILE *) NULL
;
1876 // THE FOLLOWING HAS BEEN CONTRIBUTED BY Andy Fyfe <andy@hyperparallel.com>
1877 wxCoord wx_printer_translate_x
, wx_printer_translate_y
;
1878 double wx_printer_scale_x
, wx_printer_scale_y
;
1880 wx_printer_translate_x
= (wxCoord
)m_printData
.GetPrinterTranslateX();
1881 wx_printer_translate_y
= (wxCoord
)m_printData
.GetPrinterTranslateY();
1883 wx_printer_scale_x
= m_printData
.GetPrinterScaleX();
1884 wx_printer_scale_y
= m_printData
.GetPrinterScaleY();
1886 // Compute the bounding box. Note that it is in the default user
1887 // coordinate system, thus we have to convert the values.
1888 wxCoord minX
= (wxCoord
) LogicalToDeviceX(m_minX
);
1889 wxCoord minY
= (wxCoord
) LogicalToDeviceY(m_minY
);
1890 wxCoord maxX
= (wxCoord
) LogicalToDeviceX(m_maxX
);
1891 wxCoord maxY
= (wxCoord
) LogicalToDeviceY(m_maxY
);
1893 // LOG2DEV may have changed the minimum to maximum vice versa
1894 if ( minX
> maxX
) { wxCoord tmp
= minX
; minX
= maxX
; maxX
= tmp
; }
1895 if ( minY
> maxY
) { wxCoord tmp
= minY
; minY
= maxY
; maxY
= tmp
; }
1897 // account for used scaling (boundingbox is before scaling in ps-file)
1898 double scale_x
= m_printData
.GetPrinterScaleX() / ms_PSScaleFactor
;
1899 double scale_y
= m_printData
.GetPrinterScaleY() / ms_PSScaleFactor
;
1901 wxCoord llx
, lly
, urx
, ury
;
1902 llx
= (wxCoord
) ((minX
+wx_printer_translate_x
)*scale_x
);
1903 lly
= (wxCoord
) ((minY
+wx_printer_translate_y
)*scale_y
);
1904 urx
= (wxCoord
) ((maxX
+wx_printer_translate_x
)*scale_x
);
1905 ury
= (wxCoord
) ((maxY
+wx_printer_translate_y
)*scale_y
);
1906 // (end of bounding box computation)
1909 // If we're landscape, our sense of "x" and "y" is reversed.
1910 if (m_printData
.GetOrientation() == wxLANDSCAPE
)
1913 tmp
= llx
; llx
= lly
; lly
= tmp
;
1914 tmp
= urx
; urx
= ury
; ury
= tmp
;
1916 // We need either the two lines that follow, or we need to subtract
1917 // min_x from real_translate_y, which is commented out below.
1918 llx
= llx
- (wxCoord
)(m_minX
*wx_printer_scale_y
);
1919 urx
= urx
- (wxCoord
)(m_minX
*wx_printer_scale_y
);
1922 // The Adobe specifications call for integers; we round as to make
1923 // the bounding larger.
1924 PsPrintf( wxT("%%%%BoundingBox: %d %d %d %d\n"),
1925 (wxCoord
)floor((double)llx
), (wxCoord
)floor((double)lly
),
1926 (wxCoord
)ceil((double)urx
), (wxCoord
)ceil((double)ury
) );
1928 // To check the correctness of the bounding box, postscript commands
1929 // to draw a box corresponding to the bounding box are generated below.
1930 // But since we typically don't want to print such a box, the postscript
1931 // commands are generated within comments. These lines appear before any
1932 // adjustment of scale, rotation, or translation, and hence are in the
1933 // default user coordinates.
1934 PsPrint( "% newpath\n" );
1935 PsPrintf( wxT("%% %d %d moveto\n"), llx
, lly
);
1936 PsPrintf( wxT("%% %d %d lineto\n"), urx
, lly
);
1937 PsPrintf( wxT("%% %d %d lineto\n"), urx
, ury
);
1938 PsPrintf( wxT("%% %d %d lineto closepath stroke\n"), llx
, ury
);
1941 #if defined(__X__) || defined(__WXGTK__)
1942 if (m_ok
&& (m_printData
.GetPrintMode() == wxPRINT_MODE_PRINTER
))
1945 command
+= m_printData
.GetPrinterCommand();
1946 command
+= wxT(" ");
1947 command
+= m_printData
.GetPrinterOptions();
1948 command
+= wxT(" ");
1949 command
+= m_printData
.GetFilename();
1951 wxExecute( command
, TRUE
);
1952 wxRemoveFile( m_printData
.GetFilename() );
1957 void wxPostScriptDC::StartPage()
1959 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
1961 PsPrintf( wxT("%%%%Page: %d\n"), wxPageNumber
++ );
1963 // What is this one supposed to do? RR.
1964 // *m_pstream << "matrix currentmatrix\n";
1966 // Added by Chris Breeze
1968 // Each page starts with an "initgraphics" which resets the
1969 // transformation and so we need to reset the origin
1970 // (and rotate the page for landscape printing)
1973 wxCoord translate_x
, translate_y
;
1974 double scale_x
, scale_y
;
1976 translate_x
= (wxCoord
)m_printData
.GetPrinterTranslateX();
1977 translate_y
= (wxCoord
)m_printData
.GetPrinterTranslateY();
1979 scale_x
= m_printData
.GetPrinterScaleX();
1980 scale_y
= m_printData
.GetPrinterScaleY();
1982 if (m_printData
.GetOrientation() == wxLANDSCAPE
)
1985 GetSize( (int*) NULL
, &h
);
1987 PsPrint( "90 rotate\n" );
1988 // I copied this one from a PostScript tutorial, but to no avail. RR.
1989 // PsPrint( "90 rotate llx neg ury nef translate\n" );
1993 sprintf( buffer
, "%.8f %.8f scale\n", scale_x
/ ms_PSScaleFactor
,
1994 scale_y
/ ms_PSScaleFactor
);
1995 for (int i
= 0; i
< 100; i
++)
1996 if (buffer
[i
] == ',') buffer
[i
] = '.';
1999 PsPrintf( wxT("%d %d translate\n"), translate_x
, translate_y
);
2002 void wxPostScriptDC::EndPage ()
2004 wxCHECK_RET( m_ok
, wxT("invalid postscript dc") );
2006 PsPrint( "showpage\n" );
2009 bool wxPostScriptDC::DoBlit( wxCoord xdest
, wxCoord ydest
,
2010 wxCoord fwidth
, wxCoord fheight
,
2012 wxCoord xsrc
, wxCoord ysrc
,
2013 int rop
, bool WXUNUSED(useMask
), wxCoord
WXUNUSED(xsrcMask
), wxCoord
WXUNUSED(ysrcMask
) )
2015 wxCHECK_MSG( m_ok
, FALSE
, wxT("invalid postscript dc") );
2017 wxCHECK_MSG( source
, FALSE
, wxT("invalid source dc") );
2019 /* blit into a bitmap */
2020 wxBitmap
bitmap( (int)fwidth
, (int)fheight
);
2022 memDC
.SelectObject(bitmap
);
2023 memDC
.Blit(0, 0, fwidth
, fheight
, source
, xsrc
, ysrc
, rop
); /* TODO: Blit transparently? */
2024 memDC
.SelectObject(wxNullBitmap
);
2026 /* draw bitmap. scaling and positioning is done there */
2027 DrawBitmap( bitmap
, xdest
, ydest
);
2032 wxCoord
wxPostScriptDC::GetCharHeight() const
2035 return m_font
.GetPointSize();
2040 void wxPostScriptDC::DoGetTextExtent(const wxString
& string
,
2041 wxCoord
*x
, wxCoord
*y
,
2042 wxCoord
*descent
, wxCoord
*externalLeading
,
2043 wxFont
*theFont
) const
2045 wxFont
*fontToUse
= theFont
;
2047 if (!fontToUse
) fontToUse
= (wxFont
*) &m_font
;
2049 wxCHECK_RET( fontToUse
, wxT("GetTextExtent: no font defined") );
2051 if (string
.IsEmpty())
2055 if (descent
) (*descent
) = 0;
2056 if (externalLeading
) (*externalLeading
) = 0;
2061 int wx_dpi
= GetResolution();
2062 int pango_dpi
= 600;
2063 PangoContext
*context
= pango_ft2_get_context ( pango_dpi
, pango_dpi
);
2065 double scale
= pango_dpi
/ wx_dpi
;
2066 scale
/= m_userScaleY
;
2068 pango_context_set_language (context
, pango_language_from_string ("en_US"));
2069 pango_context_set_base_dir (context
, PANGO_DIRECTION_LTR
);
2071 PangoLayout
*layout
= pango_layout_new (context
);
2073 PangoFontDescription
*desc
= fontToUse
->GetNativeFontInfo()->description
;
2074 pango_layout_set_font_description(layout
, desc
);
2076 const wxCharBuffer data
= wxConvUTF8
.cWC2MB( string
);
2078 const wxWCharBuffer wdata
= wxConvLocal
.cMB2WC( string
);
2079 const wxCharBuffer data
= wxConvUTF8
.cWC2MB( wdata
);
2081 pango_layout_set_text(layout
, (const char*) data
, strlen( (const char*) data
));
2082 PangoLayoutLine
*line
= (PangoLayoutLine
*)pango_layout_get_lines(layout
)->data
;
2084 PangoRectangle rect
;
2085 pango_layout_line_get_extents(line
, NULL
, &rect
);
2087 if (x
) (*x
) = (wxCoord
) ( rect
.width
/ PANGO_SCALE
/ scale
);
2088 if (y
) (*y
) = (wxCoord
) ( rect
.height
/ PANGO_SCALE
/ scale
);
2091 // Do something about metrics here
2094 if (externalLeading
) (*externalLeading
) = 0; // ??
2096 g_object_unref( G_OBJECT( layout
) );
2100 const wxWX2MBbuf strbuf
= string
.mb_str();
2102 #if !wxUSE_AFM_FOR_POSTSCRIPT
2103 /* Provide a VERY rough estimate (avoid using it).
2104 * Produces accurate results for mono-spaced font
2105 * such as Courier (aka wxMODERN) */
2110 height
= fontToUse
->GetPointSize();
2113 *x
= strlen (strbuf
) * height
* 72 / 120;
2115 *y
= (wxCoord
) (height
* 1.32); /* allow for descender */
2116 if (descent
) *descent
= 0;
2117 if (externalLeading
) *externalLeading
= 0;
2120 /* method for calculating string widths in postscript:
2121 / read in the AFM (adobe font metrics) file for the
2122 / actual font, parse it and extract the character widths
2123 / and also the descender. this may be improved, but for now
2124 / it works well. the AFM file is only read in if the
2125 / font is changed. this may be chached in the future.
2126 / calls to GetTextExtent with the font unchanged are rather
2129 / for each font and style used there is an AFM file necessary.
2130 / currently i have only files for the roman font family.
2131 / I try to get files for the other ones!
2133 / CAVE: the size of the string is currently always calculated
2134 / in 'points' (1/72 of an inch). this should later on be
2135 / changed to depend on the mapping mode.
2136 / CAVE: the path to the AFM files must be set before calling this
2137 / function. this is usually done by a call like the following:
2138 / wxSetAFMPath("d:\\wxw161\\afm\\");
2142 / wxPostScriptDC dc(NULL, TRUE);
2144 / wxSetAFMPath("d:\\wxw161\\afm\\");
2145 / dc.StartDoc("Test");
2148 / dc.SetFont(new wxFont(10, wxROMAN, wxNORMAL, wxNORMAL));
2149 / dc.GetTextExtent("Hallo",&w,&h);
2154 / by steve (stefan.hammes@urz.uni-heidelberg.de)
2156 / updated: 14.05.95 */
2158 /* these static vars are for storing the state between calls */
2159 static int lastFamily
= INT_MIN
;
2160 static int lastSize
= INT_MIN
;
2161 static int lastStyle
= INT_MIN
;
2162 static int lastWeight
= INT_MIN
;
2163 static int lastDescender
= INT_MIN
;
2164 static int lastWidths
[256]; /* widths of the characters */
2166 double UnderlinePosition
= 0.0;
2167 double UnderlineThickness
= 0.0;
2169 // Get actual parameters
2170 int Family
= fontToUse
->GetFamily();
2171 int Size
= fontToUse
->GetPointSize();
2172 int Style
= fontToUse
->GetStyle();
2173 int Weight
= fontToUse
->GetWeight();
2175 // If we have another font, read the font-metrics
2176 if (Family
!=lastFamily
|| Size
!=lastSize
|| Style
!=lastStyle
|| Weight
!=lastWeight
)
2178 // Store actual values
2179 lastFamily
= Family
;
2182 lastWeight
= Weight
;
2191 if ((Style
== wxITALIC
) && (Weight
== wxBOLD
)) name
= wxT("CourBoO.afm");
2192 else if ((Style
!= wxITALIC
) && (Weight
== wxBOLD
)) name
= wxT("CourBo.afm");
2193 else if ((Style
== wxITALIC
) && (Weight
!= wxBOLD
)) name
= wxT("CourO.afm");
2194 else name
= wxT("Cour.afm");
2199 if ((Style
== wxITALIC
) && (Weight
== wxBOLD
)) name
= wxT("TimesBoO.afm");
2200 else if ((Style
!= wxITALIC
) && (Weight
== wxBOLD
)) name
= wxT("TimesBo.afm");
2201 else if ((Style
== wxITALIC
) && (Weight
!= wxBOLD
)) name
= wxT("TimesO.afm");
2202 else name
= wxT("TimesRo.afm");
2207 name
= wxT("Zapf.afm");
2213 if ((Style
== wxITALIC
) && (Weight
== wxBOLD
)) name
= wxT("HelvBoO.afm");
2214 else if ((Style
!= wxITALIC
) && (Weight
== wxBOLD
)) name
= wxT("HelvBo.afm");
2215 else if ((Style
== wxITALIC
) && (Weight
!= wxBOLD
)) name
= wxT("HelvO.afm");
2216 else name
= wxT("Helv.afm");
2221 FILE *afmFile
= NULL
;
2223 // Get the directory of the AFM files
2225 if (!m_printData
.GetFontMetricPath().IsEmpty())
2227 afmName
= m_printData
.GetFontMetricPath();
2228 afmName
<< wxFILE_SEP_PATH
<< name
;
2229 afmFile
= wxFopen(afmName
,wxT("r"));
2232 #if defined(__UNIX__) && !defined(__VMS__)
2235 afmName
= wxGetDataDir();
2236 afmName
<< wxFILE_SEP_PATH
2237 #if defined(__LINUX__) || defined(__FREEBSD__)
2238 << wxT("gs_afm") << wxFILE_SEP_PATH
2240 << wxT("afm") << wxFILE_SEP_PATH
2243 afmFile
= wxFopen(afmName
,wxT("r"));
2247 /* 2. open and process the file
2248 / a short explanation of the AFM format:
2249 / we have for each character a line, which gives its size
2252 / C 63 ; WX 444 ; N question ; B 49 -14 395 676 ;
2254 / that means, we have a character with ascii code 63, and width
2255 / (444/1000 * fontSize) points.
2256 / the other data is ignored for now!
2258 / when the font has changed, we read in the right AFM file and store the
2259 / character widths in an array, which is processed below (see point 3.). */
2262 wxLogDebug( wxT("GetTextExtent: can't open AFM file '%s'"), afmName
.c_str() );
2263 wxLogDebug( wxT(" using approximate values"));
2264 for (int i
=0; i
<256; i
++) lastWidths
[i
] = 500; /* an approximate value */
2265 lastDescender
= -150; /* dito. */
2269 /* init the widths array */
2270 for(int i
=0; i
<256; i
++) lastWidths
[i
] = INT_MIN
;
2271 /* some variables for holding parts of a line */
2272 char cString
[10],semiString
[10],WXString
[10],descString
[20];
2273 char upString
[30], utString
[30], encString
[50];
2276 /* read in the file and parse it */
2277 while(fgets(line
,sizeof(line
),afmFile
)!=NULL
)
2279 /* A.) check for descender definition */
2280 if (strncmp(line
,"Descender",9)==0)
2282 if ((sscanf(line
,"%s%d",descString
,&lastDescender
)!=2) ||
2283 (strcmp(descString
,"Descender")!=0))
2285 wxLogDebug( wxT("AFM-file '%s': line '%s' has error (bad descender)"), afmName
.c_str(),line
);
2288 /* JC 1.) check for UnderlinePosition */
2289 else if(strncmp(line
,"UnderlinePosition",17)==0)
2291 if ((sscanf(line
,"%s%lf",upString
,&UnderlinePosition
)!=2) ||
2292 (strcmp(upString
,"UnderlinePosition")!=0))
2294 wxLogDebug( wxT("AFM-file '%s': line '%s' has error (bad UnderlinePosition)"), afmName
.c_str(), line
);
2297 /* JC 2.) check for UnderlineThickness */
2298 else if(strncmp(line
,"UnderlineThickness",18)==0)
2300 if ((sscanf(line
,"%s%lf",utString
,&UnderlineThickness
)!=2) ||
2301 (strcmp(utString
,"UnderlineThickness")!=0))
2303 wxLogDebug( wxT("AFM-file '%s': line '%s' has error (bad UnderlineThickness)"), afmName
.c_str(), line
);
2306 /* JC 3.) check for EncodingScheme */
2307 else if(strncmp(line
,"EncodingScheme",14)==0)
2309 if ((sscanf(line
,"%s%s",utString
,encString
)!=2) ||
2310 (strcmp(utString
,"EncodingScheme")!=0))
2312 wxLogDebug( wxT("AFM-file '%s': line '%s' has error (bad EncodingScheme)"), afmName
.c_str(), line
);
2314 else if (strncmp(encString
, "AdobeStandardEncoding", 21))
2316 wxLogDebug( wxT("AFM-file '%s': line '%s' has error (unsupported EncodingScheme %s)"),
2317 afmName
.c_str(),line
, encString
);
2320 /* B.) check for char-width */
2321 else if(strncmp(line
,"C ",2)==0)
2323 if (sscanf(line
,"%s%d%s%s%d",cString
,&ascii
,semiString
,WXString
,&cWidth
)!=5)
2325 wxLogDebug(wxT("AFM-file '%s': line '%s' has an error (bad character width)"),afmName
.c_str(),line
);
2327 if(strcmp(cString
,"C")!=0 || strcmp(semiString
,";")!=0 || strcmp(WXString
,"WX")!=0)
2329 wxLogDebug(wxT("AFM-file '%s': line '%s' has a format error"),afmName
.c_str(),line
);
2331 /* printf(" char '%c'=%d has width '%d'\n",ascii,ascii,cWidth); */
2332 if (ascii
>=0 && ascii
<256)
2334 lastWidths
[ascii
] = cWidth
; /* store width */
2338 /* MATTHEW: this happens a lot; don't print an error */
2339 /* wxLogDebug("AFM-file '%s': ASCII value %d out of range",afmName.c_str(),ascii); */
2342 /* C.) ignore other entries. */
2346 /* hack to compute correct values for german 'Umlaute'
2347 / the correct way would be to map the character names
2348 / like 'adieresis' to corresp. positions of ISOEnc and read
2349 / these values from AFM files, too. Maybe later ... */
2351 // NB: casts to int are needed to suppress gcc 3.3 warnings
2352 lastWidths
[196] = lastWidths
[(int)'A']; // Ä
2353 lastWidths
[228] = lastWidths
[(int)'a']; // ä
2354 lastWidths
[214] = lastWidths
[(int)'O']; // Ö
2355 lastWidths
[246] = lastWidths
[(int)'o']; // ö
2356 lastWidths
[220] = lastWidths
[(int)'U']; // Ü
2357 lastWidths
[252] = lastWidths
[(int)'u']; // ü
2358 lastWidths
[223] = lastWidths
[(int)251]; // ß
2360 /* JC: calculate UnderlineThickness/UnderlinePosition */
2362 // VS: dirty, but is there any better solution?
2364 pt
= (double*) &m_underlinePosition
;
2365 *pt
= LogicalToDeviceYRel((wxCoord
)(UnderlinePosition
* fontToUse
->GetPointSize())) / 1000.0f
;
2366 pt
= (double*) &m_underlineThickness
;
2367 *pt
= LogicalToDeviceYRel((wxCoord
)(UnderlineThickness
* fontToUse
->GetPointSize())) / 1000.0f
;
2372 /* 3. now the font metrics are read in, calc size this
2373 / is done by adding the widths of the characters in the
2374 / string. they are given in 1/1000 of the size! */
2377 wxCoord height
=Size
; /* by default */
2379 for(p
=(unsigned char *)wxMBSTRINGCAST strbuf
; *p
; p
++)
2381 if(lastWidths
[*p
]== INT_MIN
)
2383 wxLogDebug(wxT("GetTextExtent: undefined width for character '%c' (%d)"), *p
,*p
);
2384 sum
+= lastWidths
[(unsigned char)' ']; /* assume space */
2388 sum
+= lastWidths
[*p
];
2392 double widthSum
= sum
;
2394 widthSum
/= 1000.0F
;
2396 /* add descender to height (it is usually a negative value) */
2397 //if (lastDescender != INT_MIN)
2399 // height += (wxCoord)(((-lastDescender)/1000.0F) * Size); /* MATTHEW: forgot scale */
2401 // - commented by V. Slavik - height already contains descender in it
2402 // (judging from few experiments)
2404 /* return size values */
2406 *x
= (wxCoord
)widthSum
;
2410 /* return other parameters */
2413 if(lastDescender
!=INT_MIN
)
2415 *descent
= (wxCoord
)(((-lastDescender
)/1000.0F
) * Size
); /* MATTHEW: forgot scale */
2423 /* currently no idea how to calculate this! */
2424 if (externalLeading
) *externalLeading
= 0;
2432 // print postscript datas via required method (file, stream)
2433 void wxPostScriptDC::PsPrintf( const wxChar
* fmt
, ... )
2436 va_start(argptr
, fmt
);
2438 PsPrint( wxString::FormatV( fmt
, argptr
).c_str() );
2441 void wxPostScriptDC::PsPrint( const char* psdata
)
2443 switch( m_printData
.GetPrintMode() )
2446 // append to output stream
2447 case wxPRINT_MODE_STREAM
:
2449 wxOutputStream
* outputstream
= m_printData
.GetOutputStream();
2450 wxCHECK_RET( outputstream
, wxT("invalid outputstream") );
2451 outputstream
->Write( psdata
, strlen( psdata
) );
2454 #endif // wxUSE_STREAMS
2456 // save data into file
2458 wxCHECK_RET( m_pstream
, wxT("invalid postscript dc") );
2459 fwrite( psdata
, 1, strlen( psdata
), m_pstream
);
2463 void wxPostScriptDC::PsPrint( int ch
)
2465 switch( m_printData
.GetPrintMode() )
2468 // append to output stream
2469 case wxPRINT_MODE_STREAM
:
2471 wxOutputStream
* outputstream
= m_printData
.GetOutputStream();
2472 wxCHECK_RET( outputstream
, wxT("invalid outputstream") );
2473 outputstream
->PutC( ch
);
2476 #endif // wxUSE_STREAMS
2478 // save data into file
2480 wxCHECK_RET( m_pstream
, wxT("invalid postscript dc") );
2481 fputc( ch
, m_pstream
);
2485 #if WXWIN_COMPATIBILITY_2_2
2486 WXDLLEXPORT wxPrintSetupData
*wxThePrintSetupData
= 0;
2488 void wxInitializePrintSetupData(bool init
)
2492 // gets initialized in the constructor
2493 wxThePrintSetupData
= new wxPrintSetupData
;
2497 delete wxThePrintSetupData
;
2499 wxThePrintSetupData
= (wxPrintSetupData
*) NULL
;
2503 // A module to allow initialization/cleanup of PostScript-related
2504 // things without calling these functions from app.cpp.
2506 class WXDLLEXPORT wxPostScriptModule
: public wxModule
2508 DECLARE_DYNAMIC_CLASS(wxPostScriptModule
)
2510 wxPostScriptModule() {}
2515 IMPLEMENT_DYNAMIC_CLASS(wxPostScriptModule
, wxModule
)
2517 bool wxPostScriptModule::OnInit()
2519 wxInitializePrintSetupData();
2524 void wxPostScriptModule::OnExit()
2526 wxInitializePrintSetupData(FALSE
);
2529 // WXWIN_COMPATIBILITY_2_2
2535 // wxUSE_PRINTING_ARCHITECTURE