]> git.saurik.com Git - wxWidgets.git/blob - include/wx/univ/setup0.h
no real changes, just add some comments
[wxWidgets.git] / include / wx / univ / setup0.h
1 /////////////////////////////////////////////////////////////////////////////
2 // Name: wx/univ/setup.h
3 // Purpose: Configuration for the universal build of the library
4 // Author: Julian Smart
5 // Created: 01/02/97
6 // RCS-ID: $Id$
7 // Copyright: (c) Julian Smart
8 // Licence: wxWindows licence
9 /////////////////////////////////////////////////////////////////////////////
10
11 #ifndef _WX_SETUP_H_
12 #define _WX_SETUP_H_
13
14 /* --- start common options --- */
15 // ----------------------------------------------------------------------------
16 // global settings
17 // ----------------------------------------------------------------------------
18
19 // define this to 0 when building wxBase library - this can also be done from
20 // makefile/project file overriding the value here
21 #ifndef wxUSE_GUI
22 #define wxUSE_GUI 1
23 #endif // wxUSE_GUI
24
25 // ----------------------------------------------------------------------------
26 // compatibility settings
27 // ----------------------------------------------------------------------------
28
29 // This setting determines the compatibility with 2.6 API: set it to 0 to
30 // flag all cases of using deprecated functions.
31 //
32 // Default is 1 but please try building your code with 0 as the default will
33 // change to 0 in the next version and the deprecated functions will disappear
34 // in the version after it completely.
35 //
36 // Recommended setting: 0 (please update your code)
37 #define WXWIN_COMPATIBILITY_2_6 0
38
39 // This setting determines the compatibility with 2.8 API: set it to 0 to
40 // flag all cases of using deprecated functions.
41 //
42 // Default is 1 but please try building your code with 0 as the default will
43 // change to 0 in the next version and the deprecated functions will disappear
44 // in the version after it completely.
45 //
46 // Recommended setting: 0 (please update your code)
47 #define WXWIN_COMPATIBILITY_2_8 1
48
49 // Use the 2.8-compatible events and Connect(): this is set to 0 by default as
50 // the new events bring significant benefits in compile-time safety and
51 // flexibility but can be disabled to somewhat reduce the compilation time and,
52 // especially, to still allow building if the compiler template support is too
53 // bad to compile the new code.
54 //
55 // Default is 0 for all compilers except VC6 currently.
56 //
57 // Recommended setting: 0 (please upgrade your compiler instead of changing it)
58 #define wxEVENTS_COMPATIBILITY_2_8 0
59
60 // MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when
61 // default system font is used for wxWindow::GetCharWidth/Height() instead of
62 // the current font.
63 //
64 // Default is 0
65 //
66 // Recommended setting: 0
67 #define wxDIALOG_UNIT_COMPATIBILITY 0
68
69 // ----------------------------------------------------------------------------
70 // debugging settings
71 // ----------------------------------------------------------------------------
72
73 // Generic comment about debugging settings: they are very useful if you don't
74 // use any other memory leak detection tools such as Purify/BoundsChecker, but
75 // are probably redundant otherwise. Also, Visual C++ CRT has the same features
76 // as wxWidgets memory debugging subsystem built in since version 5.0 and you
77 // may prefer to use it instead of built in memory debugging code because it is
78 // faster and more fool proof.
79 //
80 // Using VC++ CRT memory debugging is enabled by default in debug mode
81 // (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
82 // and if __NO_VC_CRTDBG__ is not defined.
83
84 // If 1, enables wxDebugContext, for writing error messages to file, etc. If
85 // __WXDEBUG__ is not defined, will still use the normal memory operators.
86 //
87 // Default is 0
88 //
89 // Recommended setting: 0
90 #define wxUSE_DEBUG_CONTEXT 0
91
92 // If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
93 // __WXDEBUG__ is also defined.
94 //
95 // WARNING: this code may not work with all architectures, especially if
96 // alignment is an issue. This switch is currently ignored for mingw / cygwin
97 //
98 // Default is 0
99 //
100 // Recommended setting: 1 if you are not using a memory debugging tool, else 0
101 #define wxUSE_MEMORY_TRACING 0
102
103 // In debug mode, cause new and delete to be redefined globally.
104 // If this causes problems (e.g. link errors which is a common problem
105 // especially if you use another library which also redefines the global new
106 // and delete), set this to 0.
107 // This switch is currently ignored for mingw / cygwin
108 //
109 // Default is 0
110 //
111 // Recommended setting: 0
112 #define wxUSE_GLOBAL_MEMORY_OPERATORS 0
113
114 // In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
115 // this causes problems (e.g. link errors), set this to 0. You may need to set
116 // this to 0 if using templates (at least for VC++). This switch is currently
117 // ignored for mingw / cygwin / CodeWarrior
118 //
119 // Default is 0
120 //
121 // Recommended setting: 0
122 #define wxUSE_DEBUG_NEW_ALWAYS 0
123
124 // wxHandleFatalExceptions() may be used to catch the program faults at run
125 // time and, instead of terminating the program with a usual GPF message box,
126 // call the user-defined wxApp::OnFatalException() function. If you set
127 // wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
128 //
129 // This setting is for Win32 only and can only be enabled if your compiler
130 // supports Win32 structured exception handling (currently only VC++ does)
131 //
132 // Default is 1
133 //
134 // Recommended setting: 1 if your compiler supports it.
135 #define wxUSE_ON_FATAL_EXCEPTION 1
136
137 // Set this to 1 to be able to generate a human-readable (unlike
138 // machine-readable minidump created by wxCrashReport::Generate()) stack back
139 // trace when your program crashes using wxStackWalker
140 //
141 // Default is 1 if supported by the compiler.
142 //
143 // Recommended setting: 1, set to 0 if your programs never crash
144 #define wxUSE_STACKWALKER 1
145
146 // Set this to 1 to compile in wxDebugReport class which allows you to create
147 // and optionally upload to your web site a debug report consisting of back
148 // trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
149 //
150 // Default is 1 if supported by the compiler.
151 //
152 // Recommended setting: 1, it is compiled into a separate library so there
153 // is no overhead if you don't use it
154 #define wxUSE_DEBUGREPORT 1
155
156 // ----------------------------------------------------------------------------
157 // Unicode support
158 // ----------------------------------------------------------------------------
159
160 // These settings are obsolete: the library is always built in Unicode mode
161 // now, only set wxUSE_UNICODE to 0 to compile legacy code in ANSI mode if
162 // absolutely necessary -- updating it is strongly recommended as the ANSI mode
163 // will disappear completely in future wxWidgets releases.
164 #ifndef wxUSE_UNICODE
165 #define wxUSE_UNICODE 1
166 #endif
167
168 // wxUSE_WCHAR_T is required by wxWidgets now, don't change.
169 #define wxUSE_WCHAR_T 1
170
171 // ----------------------------------------------------------------------------
172 // global features
173 // ----------------------------------------------------------------------------
174
175 // Compile library in exception-safe mode? If set to 1, the library will try to
176 // behave correctly in presence of exceptions (even though it still will not
177 // use the exceptions itself) and notify the user code about any unhandled
178 // exceptions. If set to 0, propagation of the exceptions through the library
179 // code will lead to undefined behaviour -- but the code itself will be
180 // slightly smaller and faster.
181 //
182 // Note that like wxUSE_THREADS this option is automatically set to 0 if
183 // wxNO_EXCEPTIONS is defined.
184 //
185 // Default is 1
186 //
187 // Recommended setting: depends on whether you intend to use C++ exceptions
188 // in your own code (1 if you do, 0 if you don't)
189 #define wxUSE_EXCEPTIONS 1
190
191 // Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
192 //
193 // Default is 0
194 //
195 // Recommended setting: 0 (this is still work in progress...)
196 #define wxUSE_EXTENDED_RTTI 0
197
198 // Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
199 // std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
200 // and for wxHashMap to be implemented with templates.
201 //
202 // Default is 0
203 //
204 // Recommended setting: YMMV
205 #define wxUSE_STL 0
206
207 // Support for message/error logging. This includes wxLogXXX() functions and
208 // wxLog and derived classes. Don't set this to 0 unless you really know what
209 // you are doing.
210 //
211 // Default is 1
212 //
213 // Recommended setting: 1 (always)
214 #define wxUSE_LOG 1
215
216 // Recommended setting: 1
217 #define wxUSE_LOGWINDOW 1
218
219 // Recommended setting: 1
220 #define wxUSE_LOGGUI 1
221
222 // Recommended setting: 1
223 #define wxUSE_LOG_DIALOG 1
224
225 // Support for command line parsing using wxCmdLineParser class.
226 //
227 // Default is 1
228 //
229 // Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
230 #define wxUSE_CMDLINE_PARSER 1
231
232 // Support for multithreaded applications: if 1, compile in thread classes
233 // (thread.h) and make the library a bit more thread safe. Although thread
234 // support is quite stable by now, you may still consider recompiling the
235 // library without it if you have no use for it - this will result in a
236 // somewhat smaller and faster operation.
237 //
238 // Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset
239 // to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
240 // build/msw/config.* file this value will have no effect.
241 //
242 // Default is 1
243 //
244 // Recommended setting: 0 unless you do plan to develop MT applications
245 #define wxUSE_THREADS 1
246
247 // If enabled, compiles wxWidgets streams classes
248 //
249 // wx stream classes are used for image IO, process IO redirection, network
250 // protocols implementation and much more and so disabling this results in a
251 // lot of other functionality being lost.
252 //
253 // Default is 1
254 //
255 // Recommended setting: 1 as setting it to 0 disables many other things
256 #define wxUSE_STREAMS 1
257
258 // This is not a real option but is used as the default value for
259 // wxUSE_STD_IOSTREAM and wxUSE_STD_STRING.
260 //
261 // Currently the Digital Mars and Watcom compilers come without standard C++
262 // library headers by default, wxUSE_STD_STRING can be set to 1 if you do have
263 // them (e.g. from STLPort).
264 //
265 // VC++ 5.0 does include standard C++ library headers, however they produce
266 // many warnings that can't be turned off when compiled at warning level 4.
267 #if defined(__DMC__) || defined(__WATCOMC__) \
268 || (defined(_MSC_VER) && _MSC_VER < 1200)
269 #define wxUSE_STD_DEFAULT 0
270 #else
271 #define wxUSE_STD_DEFAULT 1
272 #endif
273
274 // Use standard C++ streams if 1 instead of wx streams in some places. If
275 // disabled (default), wx streams are used everywhere and wxWidgets doesn't
276 // depend on the standard streams library.
277 //
278 // Notice that enabling this does not replace wx streams with std streams
279 // everywhere, in a lot of places wx streams are used no matter what.
280 //
281 // Default is 0
282 //
283 // Recommended setting: 1 if you use the standard streams anyhow and so
284 // dependency on the standard streams library is not a
285 // problem
286 #define wxUSE_STD_IOSTREAM wxUSE_STD_DEFAULT
287
288 // Enable conversion to standard C++ string if 1.
289 //
290 // Default is 1 for most compilers.
291 //
292 // Recommended setting: 1 unless you want to ensure your program doesn't use
293 // the standard C++ library at all.
294 #define wxUSE_STD_STRING wxUSE_STD_DEFAULT
295
296 // Support for positional parameters (e.g. %1$d, %2$s ...) in wxVsnprintf.
297 // Note that if the system's implementation does not support positional
298 // parameters, setting this to 1 forces the use of the wxWidgets implementation
299 // of wxVsnprintf. The standard vsnprintf() supports positional parameters on
300 // many Unix systems but usually doesn't under Windows.
301 //
302 // Positional parameters are very useful when translating a program since using
303 // them in formatting strings allow translators to correctly reorder the
304 // translated sentences.
305 //
306 // Default is 1
307 //
308 // Recommended setting: 1 if you want to support multiple languages
309 #define wxUSE_PRINTF_POS_PARAMS 1
310
311 // ----------------------------------------------------------------------------
312 // non GUI features selection
313 // ----------------------------------------------------------------------------
314
315 // Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
316 // integer which is implemented in terms of native 64 bit integers if any or
317 // uses emulation otherwise.
318 //
319 // This class is required by wxDateTime and so you should enable it if you want
320 // to use wxDateTime. For most modern platforms, it will use the native 64 bit
321 // integers in which case (almost) all of its functions are inline and it
322 // almost does not take any space, so there should be no reason to switch it
323 // off.
324 //
325 // Recommended setting: 1
326 #define wxUSE_LONGLONG 1
327
328 // Set wxUSE_BASE64 to 1, to compile in Base64 support. This is required for
329 // storing binary data in wxConfig on most platforms.
330 //
331 // Default is 1.
332 //
333 // Recommended setting: 1 (but can be safely disabled if you don't use it)
334 #define wxUSE_BASE64 1
335
336 // Set this to 1 to be able to use wxEventLoop even in console applications
337 // (i.e. using base library only, without GUI). This is mostly useful for
338 // processing socket events but is also necessary to use timers in console
339 // applications
340 //
341 // Default is 1.
342 //
343 // Recommended setting: 1 (but can be safely disabled if you don't use it)
344 #define wxUSE_CONSOLE_EVENTLOOP 1
345
346 // Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
347 // POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
348 //
349 // Default is 1
350 //
351 // Recommended setting: 1 (wxFile is highly recommended as it is required by
352 // i18n code, wxFileConfig and others)
353 #define wxUSE_FILE 1
354 #define wxUSE_FFILE 1
355
356 // Use wxFSVolume class providing access to the configured/active mount points
357 //
358 // Default is 1
359 //
360 // Recommended setting: 1 (but may be safely disabled if you don't use it)
361 #define wxUSE_FSVOLUME 1
362
363 // Use wxStandardPaths class which allows to retrieve some standard locations
364 // in the file system
365 //
366 // Default is 1
367 //
368 // Recommended setting: 1 (may be disabled to save space, but not much)
369 #define wxUSE_STDPATHS 1
370
371 // use wxTextBuffer class: required by wxTextFile
372 #define wxUSE_TEXTBUFFER 1
373
374 // use wxTextFile class: requires wxFile and wxTextBuffer, required by
375 // wxFileConfig
376 #define wxUSE_TEXTFILE 1
377
378 // i18n support: _() macro, wxLocale class. Requires wxTextFile.
379 #define wxUSE_INTL 1
380
381 // Provide wxFoo_l() functions similar to standard foo() functions but taking
382 // an extra locale parameter.
383 //
384 // Notice that this is fully implemented only for the systems providing POSIX
385 // xlocale support or Microsoft Visual C++ >= 8 (which provides proprietary
386 // almost-equivalent of xlocale functions), otherwise wxFoo_l() functions will
387 // only work for the current user locale and "C" locale. You can use
388 // wxHAS_XLOCALE_SUPPORT to test whether the full support is available.
389 //
390 // Default is 1
391 //
392 // Recommended setting: 1 but may be disabled if you are writing programs
393 // running only in C locale anyhow
394 #define wxUSE_XLOCALE 1
395
396 // Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
397 // allow to manipulate dates, times and time intervals. wxDateTime replaces the
398 // old wxTime and wxDate classes which are still provided for backwards
399 // compatibility (and implemented in terms of wxDateTime).
400 //
401 // Note that this class is relatively new and is still officially in alpha
402 // stage because some features are not yet (fully) implemented. It is already
403 // quite useful though and should only be disabled if you are aiming at
404 // absolutely minimal version of the library.
405 //
406 // Requires: wxUSE_LONGLONG
407 //
408 // Default is 1
409 //
410 // Recommended setting: 1
411 #define wxUSE_DATETIME 1
412
413 // Set wxUSE_TIMER to 1 to compile wxTimer class
414 //
415 // Default is 1
416 //
417 // Recommended setting: 1
418 #define wxUSE_TIMER 1
419
420 // Use wxStopWatch clas.
421 //
422 // Default is 1
423 //
424 // Recommended setting: 1 (needed by wxSocket)
425 #define wxUSE_STOPWATCH 1
426
427 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
428 // which allow the application to store its settings in the persistent
429 // storage. Setting this to 1 will also enable on-demand creation of the
430 // global config object in wxApp.
431 //
432 // See also wxUSE_CONFIG_NATIVE below.
433 //
434 // Recommended setting: 1
435 #define wxUSE_CONFIG 1
436
437 // If wxUSE_CONFIG is 1, you may choose to use either the native config
438 // classes under Windows (using .INI files under Win16 and the registry under
439 // Win32) or the portable text file format used by the config classes under
440 // Unix.
441 //
442 // Default is 1 to use native classes. Note that you may still use
443 // wxFileConfig even if you set this to 1 - just the config object created by
444 // default for the applications needs will be a wxRegConfig or wxIniConfig and
445 // not wxFileConfig.
446 //
447 // Recommended setting: 1
448 #define wxUSE_CONFIG_NATIVE 1
449
450 // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
451 // to connect/disconnect from the network and be notified whenever the dial-up
452 // network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
453 //
454 // Default is 1.
455 //
456 // Recommended setting: 1
457 #define wxUSE_DIALUP_MANAGER 1
458
459 // Compile in classes for run-time DLL loading and function calling.
460 // Required by wxUSE_DIALUP_MANAGER.
461 //
462 // This setting is for Win32 only
463 //
464 // Default is 1.
465 //
466 // Recommended setting: 1
467 #define wxUSE_DYNLIB_CLASS 1
468
469 // experimental, don't use for now
470 #define wxUSE_DYNAMIC_LOADER 1
471
472 // Set to 1 to use socket classes
473 #define wxUSE_SOCKETS 1
474
475 // Set to 1 to use ipv6 socket classes (requires wxUSE_SOCKETS)
476 //
477 // Notice that currently setting this option under Windows will result in
478 // programs which can only run on recent OS versions (with ws2_32.dll
479 // installed) which is why it is disabled by default.
480 //
481 // Default is 1.
482 //
483 // Recommended setting: 1 if you need IPv6 support
484 #define wxUSE_IPV6 0
485
486 // Set to 1 to enable virtual file systems (required by wxHTML)
487 #define wxUSE_FILESYSTEM 1
488
489 // Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
490 #define wxUSE_FS_ZIP 1
491
492 // Set to 1 to enable virtual archive filesystem (requires wxUSE_FILESYSTEM)
493 #define wxUSE_FS_ARCHIVE 1
494
495 // Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
496 #define wxUSE_FS_INET 1
497
498 // wxArchive classes for accessing archives such as zip and tar
499 #define wxUSE_ARCHIVE_STREAMS 1
500
501 // Set to 1 to compile wxZipInput/OutputStream classes.
502 #define wxUSE_ZIPSTREAM 1
503
504 // Set to 1 to compile wxTarInput/OutputStream classes.
505 #define wxUSE_TARSTREAM 1
506
507 // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
508 // wxUSE_LIBPNG
509 #define wxUSE_ZLIB 1
510
511 // If enabled, the code written by Apple will be used to write, in a portable
512 // way, float on the disk. See extended.c for the license which is different
513 // from wxWidgets one.
514 //
515 // Default is 1.
516 //
517 // Recommended setting: 1 unless you don't like the license terms (unlikely)
518 #define wxUSE_APPLE_IEEE 1
519
520 // Joystick support class
521 #define wxUSE_JOYSTICK 1
522
523 // wxFontEnumerator class
524 #define wxUSE_FONTENUM 1
525
526 // wxFontMapper class
527 #define wxUSE_FONTMAP 1
528
529 // wxMimeTypesManager class
530 #define wxUSE_MIMETYPE 1
531
532 // wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP
533 // or wxURL you need to set this to 1.
534 //
535 // Default is 1.
536 //
537 // Recommended setting: 1
538 #define wxUSE_PROTOCOL 1
539
540 // The settings for the individual URL schemes
541 #define wxUSE_PROTOCOL_FILE 1
542 #define wxUSE_PROTOCOL_FTP 1
543 #define wxUSE_PROTOCOL_HTTP 1
544
545 // Define this to use wxURL class.
546 #define wxUSE_URL 1
547
548 // Define this to use native platform url and protocol support.
549 // Currently valid only for MS-Windows.
550 // Note: if you set this to 1, you can open ftp/http/gopher sites
551 // and obtain a valid input stream for these sites
552 // even when you set wxUSE_PROTOCOL_FTP/HTTP to 0.
553 // Doing so reduces the code size.
554 //
555 // This code is experimental and subject to change.
556 #define wxUSE_URL_NATIVE 0
557
558 // Support for wxVariant class used in several places throughout the library,
559 // notably in wxDataViewCtrl API.
560 //
561 // Default is 1.
562 //
563 // Recommended setting: 1 unless you want to reduce the library size as much as
564 // possible in which case setting this to 0 can gain up to 100KB.
565 #define wxUSE_VARIANT 1
566
567 // Support for regular expression matching via wxRegEx class: enable this to
568 // use POSIX regular expressions in your code. You need to compile regex
569 // library from src/regex to use it under Windows.
570 //
571 // Default is 0
572 //
573 // Recommended setting: 1 if your compiler supports it, if it doesn't please
574 // contribute us a makefile for src/regex for it
575 #define wxUSE_REGEX 1
576
577 // wxSystemOptions class
578 #define wxUSE_SYSTEM_OPTIONS 1
579
580 // wxSound class
581 #define wxUSE_SOUND 1
582
583 // Use wxMediaCtrl
584 //
585 // Default is 1.
586 //
587 // Recommended setting: 1
588 #define wxUSE_MEDIACTRL 1
589
590 // Use GStreamer for Unix.
591 //
592 // Default is 0 as this requires a lot of dependencies which might not be
593 // available.
594 //
595 // Recommended setting: 1 (wxMediaCtrl won't work by default without it)
596 #define wxUSE_GSTREAMER 0
597
598 // Use wxWidget's XRC XML-based resource system. Recommended.
599 //
600 // Default is 1
601 //
602 // Recommended setting: 1 (requires wxUSE_XML)
603 #define wxUSE_XRC 1
604
605 // XML parsing classes. Note that their API will change in the future, so
606 // using wxXmlDocument and wxXmlNode in your app is not recommended.
607 //
608 // Default is the same as wxUSE_XRC, i.e. 1 by default.
609 //
610 // Recommended setting: 1 (required by XRC)
611 #define wxUSE_XML wxUSE_XRC
612
613 // Use wxWidget's AUI docking system
614 //
615 // Default is 1
616 //
617 // Recommended setting: 1
618 #define wxUSE_AUI 1
619
620 // Use wxPropertyGrid.
621 //
622 // Default is 1
623 //
624 // Recommended setting: 1
625 #define wxUSE_PROPGRID 1
626
627 // Use wxStyledTextCtrl, a wxWidgets implementation of Scintilla.
628 //
629 // Default is 1
630 //
631 // Recommended setting: 1
632 #define wxUSE_STC 1
633
634
635 // Enable the new wxGraphicsPath and wxGraphicsContext classes for an advanced
636 // 2D drawing API. (Still somewhat experimental)
637 //
638 // Please note that on Windows you will need to link with gdiplus.lib (use
639 // USE_GDIPLUS=1 for makefile builds) and distribute gdiplus.dll with your
640 // application if you want it to be runnable on pre-XP systems.
641 //
642 // Default is 0
643 //
644 // Recommended setting: 1
645 #ifndef wxUSE_GRAPHICS_CONTEXT
646 #define wxUSE_GRAPHICS_CONTEXT 0
647 #endif
648
649 // ----------------------------------------------------------------------------
650 // Individual GUI controls
651 // ----------------------------------------------------------------------------
652
653 // You must set wxUSE_CONTROLS to 1 if you are using any controls at all
654 // (without it, wxControl class is not compiled)
655 //
656 // Default is 1
657 //
658 // Recommended setting: 1 (don't change except for very special programs)
659 #define wxUSE_CONTROLS 1
660
661 // wxPopupWindow class is a top level transient window. It is currently used
662 // to implement wxTipWindow
663 //
664 // Default is 1
665 //
666 // Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
667 #define wxUSE_POPUPWIN 1
668
669 // wxTipWindow allows to implement the custom tooltips, it is used by the
670 // context help classes. Requires wxUSE_POPUPWIN.
671 //
672 // Default is 1
673 //
674 // Recommended setting: 1 (may be set to 0)
675 #define wxUSE_TIPWINDOW 1
676
677 // Each of the settings below corresponds to one wxWidgets control. They are
678 // all switched on by default but may be disabled if you are sure that your
679 // program (including any standard dialogs it can show!) doesn't need them and
680 // if you desperately want to save some space. If you use any of these you must
681 // set wxUSE_CONTROLS as well.
682 //
683 // Default is 1
684 //
685 // Recommended setting: 1
686 #define wxUSE_ANIMATIONCTRL 1 // wxAnimationCtrl
687 #define wxUSE_BUTTON 1 // wxButton
688 #define wxUSE_BMPBUTTON 1 // wxBitmapButton
689 #define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
690 #define wxUSE_CHECKBOX 1 // wxCheckBox
691 #define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
692 #define wxUSE_CHOICE 1 // wxChoice
693 #define wxUSE_COLLPANE 1 // wxCollapsiblePane
694 #define wxUSE_COLOURPICKERCTRL 1 // wxColourPickerCtrl
695 #define wxUSE_COMBOBOX 1 // wxComboBox
696 #define wxUSE_DATAVIEWCTRL 1 // wxDataViewCtrl
697 #define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
698 #define wxUSE_DIRPICKERCTRL 1 // wxDirPickerCtrl
699 #define wxUSE_EDITABLELISTBOX 1 // wxEditableListBox
700 #define wxUSE_FILECTRL 1 // wxFileCtrl
701 #define wxUSE_FILEPICKERCTRL 1 // wxFilePickerCtrl
702 #define wxUSE_FONTPICKERCTRL 1 // wxFontPickerCtrl
703 #define wxUSE_GAUGE 1 // wxGauge
704 #define wxUSE_HEADERCTRL 1 // wxHeaderCtrl
705 #define wxUSE_HYPERLINKCTRL 1 // wxHyperlinkCtrl
706 #define wxUSE_LISTBOX 1 // wxListBox
707 #define wxUSE_LISTCTRL 1 // wxListCtrl
708 #define wxUSE_RADIOBOX 1 // wxRadioBox
709 #define wxUSE_RADIOBTN 1 // wxRadioButton
710 #define wxUSE_SCROLLBAR 1 // wxScrollBar
711 #define wxUSE_SEARCHCTRL 1 // wxSearchCtrl
712 #define wxUSE_SLIDER 1 // wxSlider
713 #define wxUSE_SPINBTN 1 // wxSpinButton
714 #define wxUSE_SPINCTRL 1 // wxSpinCtrl
715 #define wxUSE_STATBOX 1 // wxStaticBox
716 #define wxUSE_STATLINE 1 // wxStaticLine
717 #define wxUSE_STATTEXT 1 // wxStaticText
718 #define wxUSE_STATBMP 1 // wxStaticBitmap
719 #define wxUSE_TEXTCTRL 1 // wxTextCtrl
720 #define wxUSE_TOGGLEBTN 1 // requires wxButton
721 #define wxUSE_TREECTRL 1 // wxTreeCtrl
722
723 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
724 // below either wxStatusBar95 or a generic wxStatusBar will be used.
725 //
726 // Default is 1
727 //
728 // Recommended setting: 1
729 #define wxUSE_STATUSBAR 1
730
731 // Two status bar implementations are available under Win32: the generic one
732 // or the wrapper around native control. For native look and feel the native
733 // version should be used.
734 //
735 // Default is 1 for the platforms where native status bar is supported.
736 //
737 // Recommended setting: 1 (there is no advantage in using the generic one)
738 #define wxUSE_NATIVE_STATUSBAR 1
739
740 // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
741 // classes at all. Otherwise, use the native toolbar class unless
742 // wxUSE_TOOLBAR_NATIVE is 0.
743 //
744 // Default is 1 for all settings.
745 //
746 // Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE.
747 #define wxUSE_TOOLBAR 1
748 #define wxUSE_TOOLBAR_NATIVE 1
749
750 // wxNotebook is a control with several "tabs" located on one of its sides. It
751 // may be used to logically organise the data presented to the user instead of
752 // putting everything in one huge dialog. It replaces wxTabControl and related
753 // classes of wxWin 1.6x.
754 //
755 // Default is 1.
756 //
757 // Recommended setting: 1
758 #define wxUSE_NOTEBOOK 1
759
760 // wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
761 // the tabs
762 //
763 // Default is 1.
764 //
765 // Recommended setting: 1
766 #define wxUSE_LISTBOOK 1
767
768 // wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
769 // the tabs
770 //
771 // Default is 1.
772 //
773 // Recommended setting: 1
774 #define wxUSE_CHOICEBOOK 1
775
776 // wxTreebook control is similar to wxNotebook but uses wxTreeCtrl instead of
777 // the tabs
778 //
779 // Default is 1.
780 //
781 // Recommended setting: 1
782 #define wxUSE_TREEBOOK 1
783
784 // wxToolbook control is similar to wxNotebook but uses wxToolBar instead of
785 // tabs
786 //
787 // Default is 1.
788 //
789 // Recommended setting: 1
790 #define wxUSE_TOOLBOOK 1
791
792 // wxTaskBarIcon is a small notification icon shown in the system toolbar or
793 // dock.
794 //
795 // Default is 1.
796 //
797 // Recommended setting: 1 (but can be set to 0 if you don't need it)
798 #define wxUSE_TASKBARICON 1
799
800 // wxGrid class
801 //
802 // Default is 1, set to 0 to cut down compilation time and binaries size if you
803 // don't use it.
804 //
805 // Recommended setting: 1
806 //
807 #define wxUSE_GRID 1
808
809 // wxMiniFrame class: a frame with narrow title bar
810 //
811 // Default is 1.
812 //
813 // Recommended setting: 1 (it doesn't cost almost anything)
814 #define wxUSE_MINIFRAME 1
815
816 // wxComboCtrl and related classes: combobox with custom popup window and
817 // not necessarily a listbox.
818 //
819 // Default is 1.
820 //
821 // Recommended setting: 1 but can be safely set to 0 except for wxUniv where it
822 // it used by wxComboBox
823 #define wxUSE_COMBOCTRL 1
824
825 // wxOwnerDrawnComboBox is a custom combobox allowing to paint the combobox
826 // items.
827 //
828 // Default is 1.
829 //
830 // Recommended setting: 1 but can be safely set to 0, except where it is
831 // needed as a base class for generic wxBitmapComboBox.
832 #define wxUSE_ODCOMBOBOX 1
833
834 // wxBitmapComboBox is a combobox that can have images in front of text items.
835 //
836 // Default is 1.
837 //
838 // Recommended setting: 1 but can be safely set to 0
839 #define wxUSE_BITMAPCOMBOBOX 1
840
841 // wxRearrangeCtrl is a wxCheckListBox with two buttons allowing to move items
842 // up and down in it. It is also used as part of wxRearrangeDialog.
843 //
844 // Default is 1.
845 //
846 // Recommended setting: 1 but can be safely set to 0 (currently used only by
847 // wxHeaderCtrl)
848 #define wxUSE_REARRANGECTRL 1
849
850 // ----------------------------------------------------------------------------
851 // Miscellaneous GUI stuff
852 // ----------------------------------------------------------------------------
853
854 // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
855 #define wxUSE_ACCEL 1
856
857 // Hotkey support (currently Windows only)
858 #define wxUSE_HOTKEY 1
859
860 // Use wxCaret: a class implementing a "cursor" in a text control (called caret
861 // under Windows).
862 //
863 // Default is 1.
864 //
865 // Recommended setting: 1 (can be safely set to 0, not used by the library)
866 #define wxUSE_CARET 1
867
868 // Use wxDisplay class: it allows enumerating all displays on a system and
869 // their geometries as well as finding the display on which the given point or
870 // window lies.
871 //
872 // Default is 1.
873 //
874 // Recommended setting: 1 if you need it, can be safely set to 0 otherwise
875 #define wxUSE_DISPLAY 1
876
877 // Miscellaneous geometry code: needed for Canvas library
878 #define wxUSE_GEOMETRY 1
879
880 // Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
881 // wxListCtrl.
882 //
883 // Default is 1.
884 //
885 // Recommended setting: 1 (set it to 0 if you don't use any of the controls
886 // enumerated above, then this class is mostly useless too)
887 #define wxUSE_IMAGLIST 1
888
889 // Use wxMenu, wxMenuBar, wxMenuItem.
890 //
891 // Default is 1.
892 //
893 // Recommended setting: 1 (can't be disabled under MSW)
894 #define wxUSE_MENUS 1
895
896 // Use wxNotificationMessage.
897 //
898 // wxNotificationMessage allows to show non-intrusive messages to the user
899 // using balloons, banners, popups or whatever is the appropriate method for
900 // the current platform.
901 //
902 // Default is 1.
903 //
904 // Recommended setting: 1
905 #define wxUSE_NOTIFICATION_MESSAGE 1
906
907 // Use wxSashWindow class.
908 //
909 // Default is 1.
910 //
911 // Recommended setting: 1
912 #define wxUSE_SASH 1
913
914 // Use wxSplitterWindow class.
915 //
916 // Default is 1.
917 //
918 // Recommended setting: 1
919 #define wxUSE_SPLITTER 1
920
921 // Use wxToolTip and wxWindow::Set/GetToolTip() methods.
922 //
923 // Default is 1.
924 //
925 // Recommended setting: 1
926 #define wxUSE_TOOLTIPS 1
927
928 // wxValidator class and related methods
929 #define wxUSE_VALIDATORS 1
930
931 // Use reference counted ID management: this means that wxWidgets will track
932 // the automatically allocated ids (those used when you use wxID_ANY when
933 // creating a window, menu or toolbar item &c) instead of just supposing that
934 // the program never runs out of them. This is mostly useful only under wxMSW
935 // where the total ids range is limited to SHRT_MIN..SHRT_MAX and where
936 // long-running programs can run into problems with ids reuse without this. On
937 // the other platforms, where the ids have the full int range, this shouldn't
938 // be necessary.
939 #ifdef __WXMSW__
940 #define wxUSE_AUTOID_MANAGEMENT 1
941 #else
942 #define wxUSE_AUTOID_MANAGEMENT 0
943 #endif
944
945 // ----------------------------------------------------------------------------
946 // common dialogs
947 // ----------------------------------------------------------------------------
948
949 // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
950 // file selector, printer dialog). Switching this off also switches off the
951 // printing architecture and interactive wxPrinterDC.
952 //
953 // Default is 1
954 //
955 // Recommended setting: 1 (unless it really doesn't work)
956 #define wxUSE_COMMON_DIALOGS 1
957
958 // wxBusyInfo displays window with message when app is busy. Works in same way
959 // as wxBusyCursor
960 #define wxUSE_BUSYINFO 1
961
962 // Use single/multiple choice dialogs.
963 //
964 // Default is 1
965 //
966 // Recommended setting: 1 (used in the library itself)
967 #define wxUSE_CHOICEDLG 1
968
969 // Use colour picker dialog
970 //
971 // Default is 1
972 //
973 // Recommended setting: 1
974 #define wxUSE_COLOURDLG 1
975
976 // wxDirDlg class for getting a directory name from user
977 #define wxUSE_DIRDLG 1
978
979 // TODO: setting to choose the generic or native one
980
981 // Use file open/save dialogs.
982 //
983 // Default is 1
984 //
985 // Recommended setting: 1 (used in many places in the library itself)
986 #define wxUSE_FILEDLG 1
987
988 // Use find/replace dialogs.
989 //
990 // Default is 1
991 //
992 // Recommended setting: 1 (but may be safely set to 0)
993 #define wxUSE_FINDREPLDLG 1
994
995 // Use font picker dialog
996 //
997 // Default is 1
998 //
999 // Recommended setting: 1 (used in the library itself)
1000 #define wxUSE_FONTDLG 1
1001
1002 // Use wxMessageDialog and wxMessageBox.
1003 //
1004 // Default is 1
1005 //
1006 // Recommended setting: 1 (used in the library itself)
1007 #define wxUSE_MSGDLG 1
1008
1009 // progress dialog class for lengthy operations
1010 #define wxUSE_PROGRESSDLG 1
1011
1012 // support for startup tips (wxShowTip &c)
1013 #define wxUSE_STARTUP_TIPS 1
1014
1015 // text entry dialog and wxGetTextFromUser function
1016 #define wxUSE_TEXTDLG 1
1017
1018 // number entry dialog
1019 #define wxUSE_NUMBERDLG 1
1020
1021 // splash screen class
1022 #define wxUSE_SPLASH 1
1023
1024 // wizards
1025 #define wxUSE_WIZARDDLG 1
1026
1027 // Compile in wxAboutBox() function showing the standard "About" dialog.
1028 //
1029 // Default is 1
1030 //
1031 // Recommended setting: 1 but can be set to 0 to save some space if you don't
1032 // use this function
1033 #define wxUSE_ABOUTDLG 1
1034
1035 // ----------------------------------------------------------------------------
1036 // Metafiles support
1037 // ----------------------------------------------------------------------------
1038
1039 // Windows supports the graphics format known as metafile which is, though not
1040 // portable, is widely used under Windows and so is supported by wxWin (under
1041 // Windows only, of course). Win16 (Win3.1) used the so-called "Window
1042 // MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
1043 // Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
1044 // default, WMFs will be used under Win16 and EMFs under Win32. This may be
1045 // changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
1046 // wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
1047 // in any metafile related classes at all.
1048 //
1049 // Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
1050 //
1051 // Recommended setting: default or 0 for everything for portable programs.
1052 #define wxUSE_METAFILE 1
1053 #define wxUSE_ENH_METAFILE 1
1054 #define wxUSE_WIN_METAFILES_ALWAYS 0
1055
1056 // ----------------------------------------------------------------------------
1057 // Big GUI components
1058 // ----------------------------------------------------------------------------
1059
1060 // Set to 0 to disable MDI support.
1061 //
1062 // Requires wxUSE_NOTEBOOK under platforms other than MSW.
1063 //
1064 // Default is 1.
1065 //
1066 // Recommended setting: 1, can be safely set to 0.
1067 #define wxUSE_MDI 1
1068
1069 // Set to 0 to disable document/view architecture
1070 #define wxUSE_DOC_VIEW_ARCHITECTURE 1
1071
1072 // Set to 0 to disable MDI document/view architecture
1073 //
1074 // Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
1075 #define wxUSE_MDI_ARCHITECTURE 1
1076
1077 // Set to 0 to disable print/preview architecture code
1078 #define wxUSE_PRINTING_ARCHITECTURE 1
1079
1080 // wxHTML sublibrary allows to display HTML in wxWindow programs and much,
1081 // much more.
1082 //
1083 // Default is 1.
1084 //
1085 // Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
1086 // smaller library.
1087 #define wxUSE_HTML 1
1088
1089 // Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
1090 // headers and libraries to be able to compile the library with wxUSE_GLCANVAS
1091 // set to 1. Note that for some compilers (notably Microsoft Visual C++) you
1092 // will need to manually add opengl32.lib and glu32.lib to the list of
1093 // libraries linked with your program if you use OpenGL.
1094 //
1095 // Default is 0.
1096 //
1097 // Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
1098 #define wxUSE_GLCANVAS 0
1099
1100 // wxRichTextCtrl allows editing of styled text.
1101 //
1102 // Default is 1.
1103 //
1104 // Recommended setting: 1, set to 0 if you want compile a
1105 // smaller library.
1106 #define wxUSE_RICHTEXT 1
1107
1108 // ----------------------------------------------------------------------------
1109 // Data transfer
1110 // ----------------------------------------------------------------------------
1111
1112 // Use wxClipboard class for clipboard copy/paste.
1113 //
1114 // Default is 1.
1115 //
1116 // Recommended setting: 1
1117 #define wxUSE_CLIPBOARD 1
1118
1119 // Use wxDataObject and related classes. Needed for clipboard and OLE drag and
1120 // drop
1121 //
1122 // Default is 1.
1123 //
1124 // Recommended setting: 1
1125 #define wxUSE_DATAOBJ 1
1126
1127 // Use wxDropTarget and wxDropSource classes for drag and drop (this is
1128 // different from "built in" drag and drop in wxTreeCtrl which is always
1129 // available). Requires wxUSE_DATAOBJ.
1130 //
1131 // Default is 1.
1132 //
1133 // Recommended setting: 1
1134 #define wxUSE_DRAG_AND_DROP 1
1135
1136 // Use wxAccessible for enhanced and customisable accessibility.
1137 // Depends on wxUSE_OLE.
1138 //
1139 // Default is 0.
1140 //
1141 // Recommended setting (at present): 0
1142 #define wxUSE_ACCESSIBILITY 0
1143
1144 // ----------------------------------------------------------------------------
1145 // miscellaneous settings
1146 // ----------------------------------------------------------------------------
1147
1148 // wxSingleInstanceChecker class allows to verify at startup if another program
1149 // instance is running.
1150 //
1151 // Default is 1
1152 //
1153 // Recommended setting: 1 (the class is tiny, disabling it won't save much
1154 // space)
1155 #define wxUSE_SNGLINST_CHECKER 1
1156
1157 #define wxUSE_DRAGIMAGE 1
1158
1159 #define wxUSE_IPC 1
1160 // 0 for no interprocess comms
1161 #define wxUSE_HELP 1
1162 // 0 for no help facility
1163
1164 // Should we use MS HTML help for wxHelpController? If disabled, neither
1165 // wxCHMHelpController nor wxBestHelpController are available.
1166 //
1167 // Default is 1 under MSW, 0 is always used for the other platforms.
1168 //
1169 // Recommended setting: 1, only set to 0 if you have trouble compiling
1170 // wxCHMHelpController (could be a problem with really ancient compilers)
1171 #define wxUSE_MS_HTML_HELP 1
1172
1173
1174 // Use wxHTML-based help controller?
1175 #define wxUSE_WXHTML_HELP 1
1176
1177 #define wxUSE_CONSTRAINTS 1
1178 // 0 for no window layout constraint system
1179
1180 #define wxUSE_SPLINES 1
1181 // 0 for no splines
1182
1183 #define wxUSE_MOUSEWHEEL 1
1184 // Include mouse wheel support
1185
1186 // ----------------------------------------------------------------------------
1187 // wxDC classes for various output formats
1188 // ----------------------------------------------------------------------------
1189
1190 // Set to 1 for PostScript device context.
1191 #define wxUSE_POSTSCRIPT 0
1192
1193 // Set to 1 to use font metric files in GetTextExtent
1194 #define wxUSE_AFM_FOR_POSTSCRIPT 1
1195
1196 // Set to 1 to compile in support for wxSVGFileDC, a wxDC subclass which allows
1197 // to create files in SVG (Scalable Vector Graphics) format.
1198 #define wxUSE_SVG 1
1199
1200 // ----------------------------------------------------------------------------
1201 // other compiler (mis)features
1202 // ----------------------------------------------------------------------------
1203
1204 // Set this to 0 if your compiler can't cope with omission of prototype
1205 // parameters.
1206 //
1207 // Default is 1.
1208 //
1209 // Recommended setting: 1 (should never need to set this to 0)
1210 #define REMOVE_UNUSED_ARG 1
1211
1212 // VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
1213 // them. Set this option to 1 to use <iostream.h>, 0 to use <iostream>.
1214 //
1215 // Note that newer compilers (including VC++ 7.1 and later) don't support
1216 // wxUSE_IOSTREAMH == 1 and so <iostream> will be used anyhow.
1217 //
1218 // Default is 0.
1219 //
1220 // Recommended setting: 0, only set to 1 if you use a really old compiler
1221 #define wxUSE_IOSTREAMH 0
1222
1223 // ----------------------------------------------------------------------------
1224 // image format support
1225 // ----------------------------------------------------------------------------
1226
1227 // wxImage supports many different image formats which can be configured at
1228 // compile-time. BMP is always supported, others are optional and can be safely
1229 // disabled if you don't plan to use images in such format sometimes saving
1230 // substantial amount of code in the final library.
1231 //
1232 // Some formats require an extra library which is included in wxWin sources
1233 // which is mentioned if it is the case.
1234
1235 // Set to 1 for wxImage support (recommended).
1236 #define wxUSE_IMAGE 1
1237
1238 // Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
1239 #define wxUSE_LIBPNG 1
1240
1241 // Set to 1 for JPEG format support (requires libjpeg)
1242 #define wxUSE_LIBJPEG 1
1243
1244 // Set to 1 for TIFF format support (requires libtiff)
1245 #define wxUSE_LIBTIFF 1
1246
1247 // Set to 1 for TGA format support (loading only)
1248 #define wxUSE_TGA 1
1249
1250 // Set to 1 for GIF format support
1251 #define wxUSE_GIF 1
1252
1253 // Set to 1 for PNM format support
1254 #define wxUSE_PNM 1
1255
1256 // Set to 1 for PCX format support
1257 #define wxUSE_PCX 1
1258
1259 // Set to 1 for IFF format support (Amiga format)
1260 #define wxUSE_IFF 0
1261
1262 // Set to 1 for XPM format support
1263 #define wxUSE_XPM 1
1264
1265 // Set to 1 for MS Icons and Cursors format support
1266 #define wxUSE_ICO_CUR 1
1267
1268 // Set to 1 to compile in wxPalette class
1269 #define wxUSE_PALETTE 1
1270
1271 // ----------------------------------------------------------------------------
1272 // wxUniversal-only options
1273 // ----------------------------------------------------------------------------
1274
1275 // Set to 1 to enable compilation of all themes, this is the default
1276 #define wxUSE_ALL_THEMES 1
1277
1278 // Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES
1279 // is unset, if it is set these options are not used; notice that metal theme
1280 // uses Win32 one
1281 #define wxUSE_THEME_GTK 0
1282 #define wxUSE_THEME_METAL 0
1283 #define wxUSE_THEME_MONO 0
1284 #define wxUSE_THEME_WIN32 0
1285
1286
1287 /* --- end common options --- */
1288
1289 /* --- start MSW options --- */
1290 // ----------------------------------------------------------------------------
1291 // Windows-only settings
1292 // ----------------------------------------------------------------------------
1293
1294 // Set wxUSE_UNICODE_MSLU to 1 if you're compiling wxWidgets in Unicode mode
1295 // and want to run your programs under Windows 9x and not only NT/2000/XP.
1296 // This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
1297 // http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
1298 // that you will have to modify the makefiles to include unicows.lib import
1299 // library as the first library (see installation instructions in install.txt
1300 // to learn how to do it when building the library or samples).
1301 //
1302 // If your compiler doesn't have unicows.lib, you can get a version of it at
1303 // http://libunicows.sourceforge.net
1304 //
1305 // Default is 0
1306 //
1307 // Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
1308 #ifndef wxUSE_UNICODE_MSLU
1309 #define wxUSE_UNICODE_MSLU 0
1310 #endif
1311
1312 // Set this to 1 if you want to use wxWidgets and MFC in the same program. This
1313 // will override some other settings (see below)
1314 //
1315 // Default is 0.
1316 //
1317 // Recommended setting: 0 unless you really have to use MFC
1318 #define wxUSE_MFC 0
1319
1320 // Set this to 1 for generic OLE support: this is required for drag-and-drop,
1321 // clipboard, OLE Automation. Only set it to 0 if your compiler is very old and
1322 // can't compile/doesn't have the OLE headers.
1323 //
1324 // Default is 1.
1325 //
1326 // Recommended setting: 1
1327 #define wxUSE_OLE 1
1328
1329 // Set this to 1 to enable wxAutomationObject class.
1330 //
1331 // Default is 1.
1332 //
1333 // Recommended setting: 1 if you need to control other applications via OLE
1334 // Automation, can be safely set to 0 otherwise
1335 #define wxUSE_OLE_AUTOMATION 1
1336
1337 // Set this to 1 to enable wxActiveXContainer class allowing to embed OLE
1338 // controls in wx.
1339 //
1340 // Default is 1.
1341 //
1342 // Recommended setting: 1, required by wxMediaCtrl
1343 #define wxUSE_ACTIVEX 1
1344
1345 // wxDC cacheing implementation
1346 #define wxUSE_DC_CACHEING 1
1347
1348 // Set this to 1 to enable wxDIB class used internally for manipulating
1349 // wxBitmap data.
1350 //
1351 // Default is 1, set it to 0 only if you don't use wxImage neither
1352 //
1353 // Recommended setting: 1 (without it conversion to/from wxImage won't work)
1354 #define wxUSE_WXDIB 1
1355
1356 // Set to 0 to disable PostScript print/preview architecture code under Windows
1357 // (just use Windows printing).
1358 #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
1359
1360 // Set this to 1 to compile in wxRegKey class.
1361 //
1362 // Default is 1
1363 //
1364 // Recommended setting: 1, this is used internally by wx in a few places
1365 #define wxUSE_REGKEY 1
1366
1367 // Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
1368 // which allows to put more than ~32Kb of text in it even under Win9x (NT
1369 // doesn't have such limitation).
1370 //
1371 // Default is 1 for compilers which support it
1372 //
1373 // Recommended setting: 1, only set it to 0 if your compiler doesn't have
1374 // or can't compile <richedit.h>
1375 #define wxUSE_RICHEDIT 1
1376
1377 // Set this to 1 to use extra features of richedit v2 and later controls
1378 //
1379 // Default is 1 for compilers which support it
1380 //
1381 // Recommended setting: 1
1382 #define wxUSE_RICHEDIT2 1
1383
1384 // Set this to 1 to enable support for the owner-drawn menu and listboxes. This
1385 // is required by wxUSE_CHECKLISTBOX.
1386 //
1387 // Default is 1.
1388 //
1389 // Recommended setting: 1, set to 0 for a small library size reduction
1390 #define wxUSE_OWNER_DRAWN 1
1391
1392 // Set this to 1 to enable MSW-specific wxTaskBarIcon::ShowBalloon() method. It
1393 // is required by native wxNotificationMessage implementation.
1394 //
1395 // Default is 1 but disabled in wx/msw/chkconf.h if SDK is too old to contain
1396 // the necessary declarations.
1397 //
1398 // Recommended setting: 1, set to 0 for a tiny library size reduction
1399 #define wxUSE_TASKBARICON_BALLOONS 1
1400
1401 // Set to 1 to compile MS Windows XP theme engine support
1402 #define wxUSE_UXTHEME 1
1403
1404 // Set to 1 to use InkEdit control (Tablet PC), if available
1405 #define wxUSE_INKEDIT 0
1406
1407 // Set to 1 to enable .INI files based wxConfig implementation (wxIniConfig)
1408 //
1409 // Default is 0.
1410 //
1411 // Recommended setting: 0, nobody uses .INI files any more
1412 #define wxUSE_INICONF 0
1413
1414 // ----------------------------------------------------------------------------
1415 // Generic versions of native controls
1416 // ----------------------------------------------------------------------------
1417
1418 // Set this to 1 to be able to use wxDatePickerCtrlGeneric in addition to the
1419 // native wxDatePickerCtrl
1420 //
1421 // Default is 0.
1422 //
1423 // Recommended setting: 0, this is mainly used for testing
1424 #define wxUSE_DATEPICKCTRL_GENERIC 0
1425
1426 // ----------------------------------------------------------------------------
1427 // Crash debugging helpers
1428 // ----------------------------------------------------------------------------
1429
1430 // Set this to 1 to be able to use wxCrashReport::Generate() to create mini
1431 // dumps of your program when it crashes (or at any other moment)
1432 //
1433 // Default is 1 if supported by the compiler (VC++ and recent BC++ only).
1434 //
1435 // Recommended setting: 1, set to 0 if your programs never crash
1436 #define wxUSE_CRASHREPORT 1
1437 /* --- end MSW options --- */
1438
1439 /* --- start wxUniv options --- */
1440 // ----------------------------------------------------------------------------
1441 // wxUniversal-only options
1442 // ----------------------------------------------------------------------------
1443
1444 // Set to 1 to enable compilation of all themes, this is the default
1445 #define wxUSE_ALL_THEMES 1
1446
1447 // Set to 1 to enable the compilation of individual theme if wxUSE_ALL_THEMES
1448 // is unset, if it is set these options are not used; notice that metal theme
1449 // uses Win32 one
1450 #define wxUSE_THEME_GTK 0
1451 #define wxUSE_THEME_METAL 0
1452 #define wxUSE_THEME_MONO 0
1453 #define wxUSE_THEME_WIN32 0
1454 /* --- end wxUniv options --- */
1455
1456 #endif // _WX_SETUP_H_
1457