]> git.saurik.com Git - wxWidgets.git/blob - include/wx/msw/setup0.h
Permission for flood-fill code clarified
[wxWidgets.git] / include / wx / msw / setup0.h
1 /////////////////////////////////////////////////////////////////////////////
2 // Name: wx/msw/setup.h
3 // Purpose: Configuration for the library
4 // Author: Julian Smart
5 // Modified by:
6 // Created: 01/02/97
7 // RCS-ID: $Id$
8 // Copyright: (c) Julian Smart
9 // Licence: wxWindows licence
10 /////////////////////////////////////////////////////////////////////////////
11
12 #ifndef _WX_SETUP_H_
13 #define _WX_SETUP_H_
14
15 /* --- start common options --- */
16
17 // ----------------------------------------------------------------------------
18 // global settings
19 // ----------------------------------------------------------------------------
20
21 // define this to 0 when building wxBase library - this can also be done from
22 // makefile/project file overriding the value here
23 #ifndef wxUSE_GUI
24 #define wxUSE_GUI 1
25 #endif // wxUSE_GUI
26
27 // ----------------------------------------------------------------------------
28 // compatibility settings
29 // ----------------------------------------------------------------------------
30
31 // This setting determines the compatibility with 2.2 API: set it to 1 to
32 // enable it but please consider updating your code instead.
33 //
34 // Default is 0
35 //
36 // Recommended setting: 0 (please update your code)
37 #define WXWIN_COMPATIBILITY_2_2 0
38
39 // This setting determines the compatibility with 2.4 API: set it to 0 to
40 // flag all cases of using deprecated functions.
41 //
42 // Default is 1 but please try building your code with 0 as the default will
43 // change to 0 in the next version and the deprecated functions will disappear
44 // in the version after it completely.
45 //
46 // Recommended setting: 0 (please update your code)
47 #define WXWIN_COMPATIBILITY_2_4 1
48
49 // MSW-only: Set to 0 for accurate dialog units, else 1 for old behaviour when
50 // default system font is used for wxWindow::GetCharWidth/Height() instead of
51 // the current font.
52 //
53 // Default is 0
54 //
55 // Recommended setting: 0
56 #define wxDIALOG_UNIT_COMPATIBILITY 0
57
58 // ----------------------------------------------------------------------------
59 // debugging settings
60 // ----------------------------------------------------------------------------
61
62 // Generic comment about debugging settings: they are very useful if you don't
63 // use any other memory leak detection tools such as Purify/BoundsChecker, but
64 // are probably redundant otherwise. Also, Visual C++ CRT has the same features
65 // as wxWidgets memory debugging subsystem built in since version 5.0 and you
66 // may prefer to use it instead of built in memory debugging code because it is
67 // faster and more fool proof.
68 //
69 // Using VC++ CRT memory debugging is enabled by default in debug mode
70 // (__WXDEBUG__) if wxUSE_GLOBAL_MEMORY_OPERATORS is *not* enabled (i.e. is 0)
71 // and if __NO_VC_CRTDBG__ is not defined.
72
73 // If 1, enables wxDebugContext, for writing error messages to file, etc. If
74 // __WXDEBUG__ is not defined, will still use the normal memory operators.
75 //
76 // Default is 0
77 //
78 // Recommended setting: 0
79 #define wxUSE_DEBUG_CONTEXT 0
80
81 // If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
82 // __WXDEBUG__ is also defined.
83 //
84 // WARNING: this code may not work with all architectures, especially if
85 // alignment is an issue. This switch is currently ignored for mingw / cygwin
86 //
87 // Default is 0
88 //
89 // Recommended setting: 1 if you are not using a memory debugging tool, else 0
90 #define wxUSE_MEMORY_TRACING 0
91
92 // In debug mode, cause new and delete to be redefined globally.
93 // If this causes problems (e.g. link errors which is a common problem
94 // especially if you use another library which also redefines the global new
95 // and delete), set this to 0.
96 // This switch is currently ignored for mingw / cygwin
97 //
98 // Default is 0
99 //
100 // Recommended setting: 0
101 #define wxUSE_GLOBAL_MEMORY_OPERATORS 0
102
103 // In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
104 // this causes problems (e.g. link errors), set this to 0. You may need to set
105 // this to 0 if using templates (at least for VC++). This switch is currently
106 // ignored for mingw / cygwin / CodeWarrior
107 //
108 // Default is 0
109 //
110 // Recommended setting: 0
111 #define wxUSE_DEBUG_NEW_ALWAYS 0
112
113 // wxHandleFatalExceptions() may be used to catch the program faults at run
114 // time and, instead of terminating the program with a usual GPF message box,
115 // call the user-defined wxApp::OnFatalException() function. If you set
116 // wxUSE_ON_FATAL_EXCEPTION to 0, wxHandleFatalExceptions() will not work.
117 //
118 // This setting is for Win32 only and can only be enabled if your compiler
119 // supports Win32 structured exception handling (currently only VC++ does)
120 //
121 // Default is 1
122 //
123 // Recommended setting: 1 if your compiler supports it.
124 #define wxUSE_ON_FATAL_EXCEPTION 1
125
126 // Set this to 1 to be able to generate a human-readable (unlike
127 // machine-readable minidump created by wxCrashReport::Generate()) stack back
128 // trace when your program crashes using wxStackWalker
129 //
130 // Default is 1 if supported by the compiler.
131 //
132 // Recommended setting: 1, set to 0 if your programs never crash
133 #define wxUSE_STACKWALKER 1
134
135 // Set this to 1 to compile in wxDebugReport class which allows you to create
136 // and optionally upload to your web site a debug report consisting of back
137 // trace of the crash (if wxUSE_STACKWALKER == 1) and other information.
138 //
139 // Default is 1 if supported by the compiler.
140 //
141 // Recommended setting: 1, it is compiled into a separate library so there
142 // is no overhead if you don't use it
143 #define wxUSE_DEBUGREPORT 1
144
145 // ----------------------------------------------------------------------------
146 // Unicode support
147 // ----------------------------------------------------------------------------
148
149 // Set wxUSE_UNICODE to 1 to compile wxWidgets in Unicode mode: wxChar will be
150 // defined as wchar_t, wxString will use Unicode internally. If you set this
151 // to 1, you must use wxT() macro for all literal strings in the program.
152 //
153 // Unicode is currently only fully supported under Windows NT/2000/XP
154 // (Windows 9x doesn't support it and the programs compiled in Unicode mode
155 // will not run under 9x -- but see wxUSE_UNICODE_MSLU below).
156 //
157 // Default is 0
158 //
159 // Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
160 #ifndef wxUSE_UNICODE
161 #define wxUSE_UNICODE 0
162 #endif
163
164 // Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode
165 // and be able to run compiled apps under Windows 9x as well as NT/2000/XP.
166 // This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
167 // http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
168 // that you will have to modify the makefiles to include unicows.lib import
169 // library as the first library (see installation instructions in install.txt
170 // to learn how to do it when building the library or samples).
171 //
172 // If your compiler doesn't have unicows.lib, you can get a version of it at
173 // http://libunicows.sourceforge.net
174 //
175 // Default is 0
176 //
177 // Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
178 #define wxUSE_UNICODE_MSLU 0
179
180 // Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
181 // compiling the program in Unicode mode. More precisely, it will be possible
182 // to construct wxString from a wide (Unicode) string and convert any wxString
183 // to Unicode.
184 //
185 // Default is 1
186 //
187 // Recommended setting: 1
188 #define wxUSE_WCHAR_T 1
189
190 // ----------------------------------------------------------------------------
191 // global features
192 // ----------------------------------------------------------------------------
193
194 // Compile library in exception-safe mode? If set to 1, the library will try to
195 // behave correctly in presence of exceptions (even though it still will not
196 // use the exceptions itself) and notify the user code about any unhandled
197 // exceptions. If set to 0, propagation of the exceptions through the library
198 // code will lead to undefined behaviour -- but the code itself will be
199 // slightly smaller and faster.
200 //
201 // Note that like wxUSE_THREADS this option is automatically set to 0 if
202 // wxNO_EXCEPTIONS is defined.
203 //
204 // Default is 1
205 //
206 // Recommended setting: depends on whether you intend to use C++ exceptions
207 // in your own code (1 if you do, 0 if you don't)
208 #define wxUSE_EXCEPTIONS 1
209
210 // Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
211 //
212 // Default is 0
213 //
214 // Recommended setting: 0 (this is still work in progress...)
215 #define wxUSE_EXTENDED_RTTI 0
216
217 // Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
218 // std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
219 // and for wxHashMap to be implemented with templates.
220 //
221 // Default is 0
222 //
223 // Recommended setting: YMMV
224 #define wxUSE_STL 0
225
226 // Support for message/error logging. This includes wxLogXXX() functions and
227 // wxLog and derived classes. Don't set this to 0 unless you really know what
228 // you are doing.
229 //
230 // Default is 1
231 //
232 // Recommended setting: 1 (always)
233 #define wxUSE_LOG 1
234
235 // Recommended setting: 1
236 #define wxUSE_LOGWINDOW 1
237
238 // Recommended setting: 1
239 #define wxUSE_LOGGUI 1
240
241 // Recommended setting: 1
242 #define wxUSE_LOG_DIALOG 1
243
244 // Support for command line parsing using wxCmdLineParser class.
245 //
246 // Default is 1
247 //
248 // Recommended setting: 1 (can be set to 0 if you don't use the cmd line)
249 #define wxUSE_CMDLINE_PARSER 1
250
251 // Support for multithreaded applications: if 1, compile in thread classes
252 // (thread.h) and make the library a bit more thread safe. Although thread
253 // support is quite stable by now, you may still consider recompiling the
254 // library without it if you have no use for it - this will result in a
255 // somewhat smaller and faster operation.
256 //
257 // Notice that if wxNO_THREADS is defined, wxUSE_THREADS is automatically reset
258 // to 0 in wx/chkconf.h, so, for example, if you set USE_THREADS to 0 in
259 // build/msw/config.* file this value will have no effect.
260 //
261 // Default is 1
262 //
263 // Recommended setting: 0 unless you do plan to develop MT applications
264 #define wxUSE_THREADS 1
265
266 // If enabled (1), compiles wxWidgets streams classes
267 #define wxUSE_STREAMS 1
268
269 // Use standard C++ streams if 1. If 0, use wxWin streams implementation only.
270 #define wxUSE_STD_IOSTREAM 0
271
272 // Enable conversion to standard C++ string if 1.
273 #define wxUSE_STD_STRING 0
274
275 // ----------------------------------------------------------------------------
276 // non GUI features selection
277 // ----------------------------------------------------------------------------
278
279 // Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit
280 // integer which is implemented in terms of native 64 bit integers if any or
281 // uses emulation otherwise.
282 //
283 // This class is required by wxDateTime and so you should enable it if you want
284 // to use wxDateTime. For most modern platforms, it will use the native 64 bit
285 // integers in which case (almost) all of its functions are inline and it
286 // almost does not take any space, so there should be no reason to switch it
287 // off.
288 //
289 // Recommended setting: 1
290 #define wxUSE_LONGLONG 1
291
292 // Set wxUSE_(F)FILE to 1 to compile wx(F)File classes. wxFile uses low level
293 // POSIX functions for file access, wxFFile uses ANSI C stdio.h functions.
294 //
295 // Default is 1
296 //
297 // Recommended setting: 1 (wxFile is highly recommended as it is required by
298 // i18n code, wxFileConfig and others)
299 #define wxUSE_FILE 1
300 #define wxUSE_FFILE 1
301
302 // Use wxFSVolume class providing access to the configured/active mount points
303 //
304 // Default is 1
305 //
306 // Recommended setting: 1 (but may be safely disabled if you don't use it)
307 #define wxUSE_FSVOLUME 1
308
309 // Use wxStandardPaths class which allows to retrieve some standard locations
310 // in the file system
311 //
312 // Default is 1
313 //
314 // Recommended setting: 1 (may be disabled to save space, but not much)
315 #define wxUSE_STDPATHS 1
316
317 // use wxTextBuffer class: required by wxTextFile
318 #define wxUSE_TEXTBUFFER 1
319
320 // use wxTextFile class: requires wxFile and wxTextBuffer, required by
321 // wxFileConfig
322 #define wxUSE_TEXTFILE 1
323
324 // i18n support: _() macro, wxLocale class. Requires wxTextFile.
325 #define wxUSE_INTL 1
326
327 // Set wxUSE_DATETIME to 1 to compile the wxDateTime and related classes which
328 // allow to manipulate dates, times and time intervals. wxDateTime replaces the
329 // old wxTime and wxDate classes which are still provided for backwards
330 // compatibility (and implemented in terms of wxDateTime).
331 //
332 // Note that this class is relatively new and is still officially in alpha
333 // stage because some features are not yet (fully) implemented. It is already
334 // quite useful though and should only be disabled if you are aiming at
335 // absolutely minimal version of the library.
336 //
337 // Requires: wxUSE_LONGLONG
338 //
339 // Default is 1
340 //
341 // Recommended setting: 1
342 #define wxUSE_DATETIME 1
343
344 // Set wxUSE_TIMER to 1 to compile wxTimer class
345 //
346 // Default is 1
347 //
348 // Recommended setting: 1
349 #define wxUSE_TIMER 1
350
351 // Use wxStopWatch clas.
352 //
353 // Default is 1
354 //
355 // Recommended setting: 1 (needed by wxSocket)
356 #define wxUSE_STOPWATCH 1
357
358 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes
359 // which allow the application to store its settings in the persistent
360 // storage. Setting this to 1 will also enable on-demand creation of the
361 // global config object in wxApp.
362 //
363 // See also wxUSE_CONFIG_NATIVE below.
364 //
365 // Recommended setting: 1
366 #define wxUSE_CONFIG 1
367
368 // If wxUSE_CONFIG is 1, you may choose to use either the native config
369 // classes under Windows (using .INI files under Win16 and the registry under
370 // Win32) or the portable text file format used by the config classes under
371 // Unix.
372 //
373 // Default is 1 to use native classes. Note that you may still use
374 // wxFileConfig even if you set this to 1 - just the config object created by
375 // default for the applications needs will be a wxRegConfig or wxIniConfig and
376 // not wxFileConfig.
377 //
378 // Recommended setting: 1
379 #define wxUSE_CONFIG_NATIVE 1
380
381 // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows
382 // to connect/disconnect from the network and be notified whenever the dial-up
383 // network connection is established/terminated. Requires wxUSE_DYNAMIC_LOADER.
384 //
385 // Default is 1.
386 //
387 // Recommended setting: 1
388 #define wxUSE_DIALUP_MANAGER 1
389
390 // Compile in classes for run-time DLL loading and function calling.
391 // Required by wxUSE_DIALUP_MANAGER.
392 //
393 // This setting is for Win32 only
394 //
395 // Default is 1.
396 //
397 // Recommended setting: 1
398 #define wxUSE_DYNLIB_CLASS 1
399
400 // experimental, don't use for now
401 #define wxUSE_DYNAMIC_LOADER 1
402
403 // Set to 1 to use socket classes
404 #define wxUSE_SOCKETS 1
405
406 // Set to 1 to enable virtual file systems (required by wxHTML)
407 #define wxUSE_FILESYSTEM 1
408
409 // Set to 1 to enable virtual ZIP filesystem (requires wxUSE_FILESYSTEM)
410 #define wxUSE_FS_ZIP 1
411
412 // Set to 1 to enable virtual Internet filesystem (requires wxUSE_FILESYSTEM)
413 #define wxUSE_FS_INET 1
414
415 // wxArchive classes for accessing archives such as zip and tar
416 #define wxUSE_ARCHIVE_STREAMS 1
417
418 // Set to 1 to compile wxZipInput/OutputStream classes.
419 #define wxUSE_ZIPSTREAM 1
420
421 // Set to 1 to compile wxZlibInput/OutputStream classes. Also required by
422 // wxUSE_LIBPNG
423 #define wxUSE_ZLIB 1
424
425 // If enabled, the code written by Apple will be used to write, in a portable
426 // way, float on the disk. See extended.c for the license which is different
427 // from wxWidgets one.
428 //
429 // Default is 1.
430 //
431 // Recommended setting: 1 unless you don't like the license terms (unlikely)
432 #define wxUSE_APPLE_IEEE 1
433
434 // Joystick support class
435 #define wxUSE_JOYSTICK 1
436
437 // wxFontMapper class
438 #define wxUSE_FONTMAP 1
439
440 // wxMimeTypesManager class
441 #define wxUSE_MIMETYPE 1
442
443 // wxProtocol and related classes: if you want to use either of wxFTP, wxHTTP
444 // or wxURL you need to set this to 1.
445 //
446 // Default is 1.
447 //
448 // Recommended setting: 1
449 #define wxUSE_PROTOCOL 1
450
451 // The settings for the individual URL schemes
452 #define wxUSE_PROTOCOL_FILE 1
453 #define wxUSE_PROTOCOL_FTP 1
454 #define wxUSE_PROTOCOL_HTTP 1
455
456 // Define this to use wxURL class.
457 #define wxUSE_URL 1
458
459 // Define this to use native platform url and protocol support.
460 // Currently valid only for MS-Windows.
461 // Note: if you set this to 1, you can open ftp/http/gopher sites
462 // and obtain a valid input stream for these sites
463 // even when you set wxUSE_PROTOCOL_FTP/HTTP to 0.
464 // Doing so reduces the code size.
465 //
466 // This code is experimental and subject to change.
467 #define wxUSE_URL_NATIVE 0
468
469 // Support for regular expression matching via wxRegEx class: enable this to
470 // use POSIX regular expressions in your code. You need to compile regex
471 // library from src/regex to use it under Windows.
472 //
473 // Default is 0
474 //
475 // Recommended setting: 1 if your compiler supports it, if it doesn't please
476 // contribute us a makefile for src/regex for it
477 #define wxUSE_REGEX 1
478
479 // wxSystemOptions class
480 #define wxUSE_SYSTEM_OPTIONS 1
481
482 // wxSound class
483 #define wxUSE_SOUND 1
484
485 // Use wxMediaCtrl
486 //
487 // Default is 1.
488 //
489 // Recommended setting: 1
490 #define wxUSE_MEDIACTRL 1
491
492 // Use QuickTime
493 //
494 // Default is 0
495 //
496 // Recommended setting: 1 if you have the QT SDK installed and you need it, else 0
497 #define wxUSE_QUICKTIME 0
498
499 // Use DirectShow (requires linkage to strmiids.lib)
500 //
501 // Default is 0
502 //
503 // Recommended setting: 1 if the DirectX 7 SDK is installed (highly recommended), else 0
504 #define wxUSE_DIRECTSHOW 0
505
506 // Use GStreamer for Unix (req a lot of dependancies)
507 //
508 // Default is 0
509 //
510 // Recommended setting: 1 (wxMediaCtrl won't work by default without it)
511 #define wxUSE_GSTREAMER 0
512
513 // Use wxWidget's XRC XML-based resource system. Recommended.
514 //
515 // Default is 1
516 //
517 // Recommended setting: 1 (requires wxUSE_XML)
518 #define wxUSE_XRC 1
519
520 // XML parsing classes. Note that their API will change in the future, so
521 // using wxXmlDocument and wxXmlNode in your app is not recommended.
522 //
523 // Default is 1
524 //
525 // Recommended setting: 1 (required by XRC)
526 #if wxUSE_XRC
527 # define wxUSE_XML 1
528 #else
529 # define wxUSE_XML 0
530 #endif
531
532 // ----------------------------------------------------------------------------
533 // Individual GUI controls
534 // ----------------------------------------------------------------------------
535
536 // You must set wxUSE_CONTROLS to 1 if you are using any controls at all
537 // (without it, wxControl class is not compiled)
538 //
539 // Default is 1
540 //
541 // Recommended setting: 1 (don't change except for very special programs)
542 #define wxUSE_CONTROLS 1
543
544 // wxPopupWindow class is a top level transient window. It is currently used
545 // to implement wxTipWindow
546 //
547 // Default is 1
548 //
549 // Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
550 #define wxUSE_POPUPWIN 1
551
552 // wxTipWindow allows to implement the custom tooltips, it is used by the
553 // context help classes. Requires wxUSE_POPUPWIN.
554 //
555 // Default is 1
556 //
557 // Recommended setting: 1 (may be set to 0)
558 #define wxUSE_TIPWINDOW 1
559
560 // Each of the settings below corresponds to one wxWidgets control. They are
561 // all switched on by default but may be disabled if you are sure that your
562 // program (including any standard dialogs it can show!) doesn't need them and
563 // if you desperately want to save some space. If you use any of these you must
564 // set wxUSE_CONTROLS as well.
565 //
566 // Default is 1
567 //
568 // Recommended setting: 1
569 #define wxUSE_BUTTON 1 // wxButton
570 #define wxUSE_BMPBUTTON 1 // wxBitmapButton
571 #define wxUSE_CALENDARCTRL 1 // wxCalendarCtrl
572 #define wxUSE_CHECKBOX 1 // wxCheckBox
573 #define wxUSE_CHECKLISTBOX 1 // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
574 #define wxUSE_CHOICE 1 // wxChoice
575 #define wxUSE_COMBOBOX 1 // wxComboBox
576 #define wxUSE_DATEPICKCTRL 1 // wxDatePickerCtrl
577 #define wxUSE_GAUGE 1 // wxGauge
578 #define wxUSE_LISTBOX 1 // wxListBox
579 #define wxUSE_LISTCTRL 1 // wxListCtrl
580 #define wxUSE_RADIOBOX 1 // wxRadioBox
581 #define wxUSE_RADIOBTN 1 // wxRadioButton
582 #define wxUSE_SCROLLBAR 1 // wxScrollBar
583 #define wxUSE_SLIDER 1 // wxSlider
584 #define wxUSE_SPINBTN 1 // wxSpinButton
585 #define wxUSE_SPINCTRL 1 // wxSpinCtrl
586 #define wxUSE_STATBOX 1 // wxStaticBox
587 #define wxUSE_STATLINE 1 // wxStaticLine
588 #define wxUSE_STATTEXT 1 // wxStaticText
589 #define wxUSE_STATBMP 1 // wxStaticBitmap
590 #define wxUSE_TEXTCTRL 1 // wxTextCtrl
591 #define wxUSE_TOGGLEBTN 1 // requires wxButton
592 #define wxUSE_TREECTRL 1 // wxTreeCtrl
593
594 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
595 // below either wxStatusBar95 or a generic wxStatusBar will be used.
596 //
597 // Default is 1
598 //
599 // Recommended setting: 1
600 #define wxUSE_STATUSBAR 1
601
602 // Two status bar implementations are available under Win32: the generic one
603 // or the wrapper around native control. For native look and feel the native
604 // version should be used.
605 //
606 // Default is 1 for the platforms where native status bar is supported.
607 //
608 // Recommended setting: 1 (there is no advantage in using the generic one)
609 #define wxUSE_NATIVE_STATUSBAR 1
610
611 // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
612 // classes at all. Otherwise, use the native toolbar class unless
613 // wxUSE_TOOLBAR_NATIVE is 0.
614 //
615 // Default is 1 for all settings.
616 //
617 // Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE.
618 #define wxUSE_TOOLBAR 1
619 #define wxUSE_TOOLBAR_NATIVE 1
620
621 // wxNotebook is a control with several "tabs" located on one of its sides. It
622 // may be used to logically organise the data presented to the user instead of
623 // putting everything in one huge dialog. It replaces wxTabControl and related
624 // classes of wxWin 1.6x.
625 //
626 // Default is 1.
627 //
628 // Recommended setting: 1
629 #define wxUSE_NOTEBOOK 1
630
631 // wxListbook control is similar to wxNotebook but uses wxListCtrl instead of
632 // the tabs
633 //
634 // Default is 1.
635 //
636 // Recommended setting: 1
637 #define wxUSE_LISTBOOK 1
638
639 // wxChoicebook control is similar to wxNotebook but uses wxChoice instead of
640 // the tabs
641 //
642 // Default is 1.
643 //
644 // Recommended setting: 1
645 #define wxUSE_CHOICEBOOK 1
646
647 // wxTabDialog is a generic version of wxNotebook but it is incompatible with
648 // the new class. It shouldn't be used in new code.
649 //
650 // Default is 0.
651 //
652 // Recommended setting: 0 (use wxNotebook)
653 #define wxUSE_TAB_DIALOG 0
654
655 // wxGrid class
656 //
657 // Default is 1, set to 0 to cut down compilation time and binaries size if you
658 // don't use it.
659 //
660 // Recommended setting: 1
661 //
662 #define wxUSE_GRID 1
663
664 // wxMiniFrame class: a frame with narrow title bar
665 //
666 // Default is 1.
667 //
668 // Recommended setting: 1 (it doesn't cost almost anything)
669 #define wxUSE_MINIFRAME 1
670
671 // ----------------------------------------------------------------------------
672 // Miscellaneous GUI stuff
673 // ----------------------------------------------------------------------------
674
675 // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
676 #define wxUSE_ACCEL 1
677
678 // Hotkey support (currently Windows only)
679 #define wxUSE_HOTKEY 1
680
681 // Use wxCaret: a class implementing a "cursor" in a text control (called caret
682 // under Windows).
683 //
684 // Default is 1.
685 //
686 // Recommended setting: 1 (can be safely set to 0, not used by the library)
687 #define wxUSE_CARET 1
688
689 // Use wxDisplay class: it allows enumerating all displays on a system and
690 // working with them.
691 //
692 // Default is 0 because it isn't yet implemented on all platforms
693 //
694 // Recommended setting: 1 if you need it, can be safely set to 0 otherwise
695 #define wxUSE_DISPLAY 0
696
697 // Miscellaneous geometry code: needed for Canvas library
698 #define wxUSE_GEOMETRY 1
699
700 // Use wxImageList. This class is needed by wxNotebook, wxTreeCtrl and
701 // wxListCtrl.
702 //
703 // Default is 1.
704 //
705 // Recommended setting: 1 (set it to 0 if you don't use any of the controls
706 // enumerated above, then this class is mostly useless too)
707 #define wxUSE_IMAGLIST 1
708
709 // Use wxMenu, wxMenuBar, wxMenuItem.
710 //
711 // Default is 1.
712 //
713 // Recommended setting: 1 (can't be disabled under MSW)
714 #define wxUSE_MENUS 1
715
716 // Use wxSashWindow class.
717 //
718 // Default is 1.
719 //
720 // Recommended setting: 1
721 #define wxUSE_SASH 1
722
723 // Use wxSplitterWindow class.
724 //
725 // Default is 1.
726 //
727 // Recommended setting: 1
728 #define wxUSE_SPLITTER 1
729
730 // Use wxToolTip and wxWindow::Set/GetToolTip() methods.
731 //
732 // Default is 1.
733 //
734 // Recommended setting: 1
735 #define wxUSE_TOOLTIPS 1
736
737 // wxValidator class and related methods
738 #define wxUSE_VALIDATORS 1
739
740 // ----------------------------------------------------------------------------
741 // common dialogs
742 // ----------------------------------------------------------------------------
743
744 // On rare occasions (e.g. using DJGPP) may want to omit common dialogs (e.g.
745 // file selector, printer dialog). Switching this off also switches off the
746 // printing architecture and interactive wxPrinterDC.
747 //
748 // Default is 1
749 //
750 // Recommended setting: 1 (unless it really doesn't work)
751 #define wxUSE_COMMON_DIALOGS 1
752
753 // wxBusyInfo displays window with message when app is busy. Works in same way
754 // as wxBusyCursor
755 #define wxUSE_BUSYINFO 1
756
757 // Use single/multiple choice dialogs.
758 //
759 // Default is 1
760 //
761 // Recommended setting: 1 (used in the library itself)
762 #define wxUSE_CHOICEDLG 1
763
764 // Use colour picker dialog
765 //
766 // Default is 1
767 //
768 // Recommended setting: 1
769 #define wxUSE_COLOURDLG 1
770
771 // wxDirDlg class for getting a directory name from user
772 #define wxUSE_DIRDLG 1
773
774 // TODO: setting to choose the generic or native one
775
776 // Use file open/save dialogs.
777 //
778 // Default is 1
779 //
780 // Recommended setting: 1 (used in many places in the library itself)
781 #define wxUSE_FILEDLG 1
782
783 // Use find/replace dialogs.
784 //
785 // Default is 1
786 //
787 // Recommended setting: 1 (but may be safely set to 0)
788 #define wxUSE_FINDREPLDLG 1
789
790 // Use font picker dialog
791 //
792 // Default is 1
793 //
794 // Recommended setting: 1 (used in the library itself)
795 #define wxUSE_FONTDLG 1
796
797 // Use wxMessageDialog and wxMessageBox.
798 //
799 // Default is 1
800 //
801 // Recommended setting: 1 (used in the library itself)
802 #define wxUSE_MSGDLG 1
803
804 // progress dialog class for lengthy operations
805 #define wxUSE_PROGRESSDLG 1
806
807 // support for startup tips (wxShowTip &c)
808 #define wxUSE_STARTUP_TIPS 1
809
810 // text entry dialog and wxGetTextFromUser function
811 #define wxUSE_TEXTDLG 1
812
813 // number entry dialog
814 #define wxUSE_NUMBERDLG 1
815
816 // splash screen class
817 #define wxUSE_SPLASH 1
818
819 // wizards
820 #define wxUSE_WIZARDDLG 1
821
822 // ----------------------------------------------------------------------------
823 // Metafiles support
824 // ----------------------------------------------------------------------------
825
826 // Windows supports the graphics format known as metafile which is, though not
827 // portable, is widely used under Windows and so is supported by wxWin (under
828 // Windows only, of course). Win16 (Win3.1) used the so-called "Window
829 // MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in
830 // Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by
831 // default, WMFs will be used under Win16 and EMFs under Win32. This may be
832 // changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting
833 // wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile
834 // in any metafile related classes at all.
835 //
836 // Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS.
837 //
838 // Recommended setting: default or 0 for everything for portable programs.
839 #define wxUSE_METAFILE 1
840 #define wxUSE_ENH_METAFILE 1
841 #define wxUSE_WIN_METAFILES_ALWAYS 0
842
843 // ----------------------------------------------------------------------------
844 // Big GUI components
845 // ----------------------------------------------------------------------------
846
847 // Set to 0 to disable MDI support.
848 //
849 // Requires wxUSE_NOTEBOOK under platforms other than MSW.
850 //
851 // Default is 1.
852 //
853 // Recommended setting: 1, can be safely set to 0.
854 #define wxUSE_MDI 1
855
856 // Set to 0 to disable document/view architecture
857 #define wxUSE_DOC_VIEW_ARCHITECTURE 1
858
859 // Set to 0 to disable MDI document/view architecture
860 //
861 // Requires wxUSE_MDI && wxUSE_DOC_VIEW_ARCHITECTURE
862 #define wxUSE_MDI_ARCHITECTURE 1
863
864 // Set to 0 to disable print/preview architecture code
865 #define wxUSE_PRINTING_ARCHITECTURE 1
866
867 // wxHTML sublibrary allows to display HTML in wxWindow programs and much,
868 // much more.
869 //
870 // Default is 1.
871 //
872 // Recommended setting: 1 (wxHTML is great!), set to 0 if you want compile a
873 // smaller library.
874 #define wxUSE_HTML 1
875
876 // Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
877 // headers and libraries to be able to compile the library with wxUSE_GLCANVAS
878 // set to 1. Note that for some compilers (notably Microsoft Visual C++) you
879 // will need to manually add opengl32.lib and glu32.lib to the list of
880 // libraries linked with your program if you use OpenGL.
881 //
882 // Default is 0.
883 //
884 // Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
885 #define wxUSE_GLCANVAS 0
886
887 // ----------------------------------------------------------------------------
888 // Data transfer
889 // ----------------------------------------------------------------------------
890
891 // Use wxClipboard class for clipboard copy/paste.
892 //
893 // Default is 1.
894 //
895 // Recommended setting: 1
896 #define wxUSE_CLIPBOARD 1
897
898 // Use wxDataObject and related classes. Needed for clipboard and OLE drag and
899 // drop
900 //
901 // Default is 1.
902 //
903 // Recommended setting: 1
904 #define wxUSE_DATAOBJ 1
905
906 // Use wxDropTarget and wxDropSource classes for drag and drop (this is
907 // different from "built in" drag and drop in wxTreeCtrl which is always
908 // available). Requires wxUSE_DATAOBJ.
909 //
910 // Default is 1.
911 //
912 // Recommended setting: 1
913 #define wxUSE_DRAG_AND_DROP 1
914
915 // Use wxAccessible for enhanced and customisable accessibility.
916 // Depends on wxUSE_OLE.
917 //
918 // Default is 0.
919 //
920 // Recommended setting (at present): 0
921 #define wxUSE_ACCESSIBILITY 0
922
923 // ----------------------------------------------------------------------------
924 // miscellaneous settings
925 // ----------------------------------------------------------------------------
926
927 // wxSingleInstanceChecker class allows to verify at startup if another program
928 // instance is running (it is only available under Win32)
929 //
930 // Default is 1
931 //
932 // Recommended setting: 1 (the class is tiny, disabling it won't save much
933 // space)
934 #define wxUSE_SNGLINST_CHECKER 1
935
936 #define wxUSE_DRAGIMAGE 1
937
938 #define wxUSE_IPC 1
939 // 0 for no interprocess comms
940 #define wxUSE_HELP 1
941 // 0 for no help facility
942 #define wxUSE_MS_HTML_HELP 1
943 // 0 for no MS HTML Help
944
945 // Use wxHTML-based help controller?
946 #define wxUSE_WXHTML_HELP 1
947
948 #define wxUSE_RESOURCES 0
949 // 0 for no wxGetResource/wxWriteResource
950 #define wxUSE_CONSTRAINTS 1
951 // 0 for no window layout constraint system
952
953 #define wxUSE_SPLINES 1
954 // 0 for no splines
955
956 #define wxUSE_MOUSEWHEEL 1
957 // Include mouse wheel support
958
959 // ----------------------------------------------------------------------------
960 // postscript support settings
961 // ----------------------------------------------------------------------------
962
963 // Set to 1 for PostScript device context.
964 #define wxUSE_POSTSCRIPT 0
965
966 // Set to 1 to use font metric files in GetTextExtent
967 #define wxUSE_AFM_FOR_POSTSCRIPT 1
968
969 // ----------------------------------------------------------------------------
970 // database classes
971 // ----------------------------------------------------------------------------
972
973 // Define 1 to use ODBC classes
974 #define wxUSE_ODBC 0
975
976 // For backward compatibility reasons, this parameter now only controls the
977 // default scrolling method used by cursors. This default behavior can be
978 // overriden by setting the second param of wxDB::wxDbGetConnection() or
979 // wxDb() constructor to indicate whether the connection (and any wxDbTable()s
980 // that use the connection) should support forward only scrolling of cursors,
981 // or both forward and backward support for backward scrolling cursors is
982 // dependent on the data source as well as the ODBC driver being used.
983 #define wxODBC_FWD_ONLY_CURSORS 1
984
985 // Default is 0. Set to 1 to use the deprecated classes, enum types, function,
986 // member variables. With a setting of 1, full backward compatability with the
987 // 2.0.x release is possible. It is STRONGLY recommended that this be set to 0,
988 // as future development will be done only on the non-deprecated
989 // functions/classes/member variables/etc.
990 #define wxODBC_BACKWARD_COMPATABILITY 0
991
992 // ----------------------------------------------------------------------------
993 // other compiler (mis)features
994 // ----------------------------------------------------------------------------
995
996 // Set this to 0 if your compiler can't cope with omission of prototype
997 // parameters.
998 //
999 // Default is 1.
1000 //
1001 // Recommended setting: 1 (should never need to set this to 0)
1002 #define REMOVE_UNUSED_ARG 1
1003
1004 // VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
1005 // them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1
1006 // and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be
1007 // used anyhow.
1008 //
1009 // Default is 1.
1010 //
1011 // Recommended setting: whatever your compiler likes more
1012 #define wxUSE_IOSTREAMH 1
1013
1014 // ----------------------------------------------------------------------------
1015 // image format support
1016 // ----------------------------------------------------------------------------
1017
1018 // wxImage supports many different image formats which can be configured at
1019 // compile-time. BMP is always supported, others are optional and can be safely
1020 // disabled if you don't plan to use images in such format sometimes saving
1021 // substantial amount of code in the final library.
1022 //
1023 // Some formats require an extra library which is included in wxWin sources
1024 // which is mentioned if it is the case.
1025
1026 // Set to 1 for wxImage support (recommended).
1027 #define wxUSE_IMAGE 1
1028
1029 // Set to 1 for PNG format support (requires libpng). Also requires wxUSE_ZLIB.
1030 #define wxUSE_LIBPNG 1
1031
1032 // Set to 1 for JPEG format support (requires libjpeg)
1033 #define wxUSE_LIBJPEG 1
1034
1035 // Set to 1 for TIFF format support (requires libtiff)
1036 #define wxUSE_LIBTIFF 1
1037
1038 // Set to 1 for GIF format support
1039 #define wxUSE_GIF 1
1040
1041 // Set to 1 for PNM format support
1042 #define wxUSE_PNM 1
1043
1044 // Set to 1 for PCX format support
1045 #define wxUSE_PCX 1
1046
1047 // Set to 1 for IFF format support (Amiga format)
1048 #define wxUSE_IFF 0
1049
1050 // Set to 1 for XPM format support
1051 #define wxUSE_XPM 1
1052
1053 // Set to 1 for MS Icons and Cursors format support
1054 #define wxUSE_ICO_CUR 1
1055
1056 // Set to 1 to compile in wxPalette class
1057 #define wxUSE_PALETTE 1
1058
1059 /* --- end common options --- */
1060
1061 // ----------------------------------------------------------------------------
1062 // Windows-only settings
1063 // ----------------------------------------------------------------------------
1064
1065 // Set this to 1 if you want to use wxWidgets and MFC in the same program. This
1066 // will override some other settings (see below)
1067 //
1068 // Default is 0.
1069 //
1070 // Recommended setting: 0 unless you really have to use MFC
1071 #define wxUSE_MFC 0
1072
1073 // Set this to 1 for generic OLE support: this is required for drag-and-drop,
1074 // clipboard, OLE Automation. Only set it to 0 if your compiler is very old and
1075 // can't compile/doesn't have the OLE headers.
1076 //
1077 // Default is 1.
1078 //
1079 // Recommended setting: 1
1080 #define wxUSE_OLE 1
1081
1082 // wxDC cacheing implementation
1083 #define wxUSE_DC_CACHEING 1
1084
1085 // Set this to 1 to enable the use of DIB's for wxBitmap to support
1086 // bitmaps > 16MB on Win95/98/Me. Set to 0 to use DDB's only.
1087 #define wxUSE_DIB_FOR_BITMAP 0
1088
1089 // Set this to 1 to enable wxDIB
1090 #define wxUSE_WXDIB 1
1091
1092 // Set to 0 to disable PostScript print/preview architecture code under Windows
1093 // (just use Windows printing).
1094 #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
1095
1096 // Define as 1 to use Microsoft's ItsyBitsy small title bar library, for
1097 // wxMiniFrame. This setting is only used for Win3.1; Win9x and NT use native
1098 // miniframes support instead.
1099 //
1100 // Default is 0 for (most) Win32 (systems), 1 for Win16
1101 //
1102 #define wxUSE_ITSY_BITSY 0
1103
1104 // Set this to 1 to use RICHEDIT controls for wxTextCtrl with style wxTE_RICH
1105 // which allows to put more than ~32Kb of text in it even under Win9x (NT
1106 // doesn't have such limitation).
1107 //
1108 // Default is 1 for compilers which support it
1109 //
1110 // Recommended setting: 1, only set it to 0 if your compiler doesn't have
1111 // or can't compile <richedit.h>
1112 #if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__)
1113 #define wxUSE_RICHEDIT 1
1114
1115 // TODO: This should be ifdef'ed for any compilers that don't support
1116 // RichEdit 2.0 but do have RichEdit 1.0...
1117 #define wxUSE_RICHEDIT2 1
1118
1119 #else
1120 #define wxUSE_RICHEDIT 0
1121 #define wxUSE_RICHEDIT2 0
1122 #endif
1123
1124 // Set this to 1 to enable support for the owner-drawn menu and listboxes. This
1125 // is required by wxUSE_CHECKLISTBOX.
1126 //
1127 // Default is 1.
1128 //
1129 // Recommended setting: 1, set to 0 for a small library size reduction
1130 #define wxUSE_OWNER_DRAWN 1
1131
1132 // Set to 1 to compile MS Windows XP theme engine support
1133 #define wxUSE_UXTHEME 1
1134
1135 // Set to 1 to auto-adapt to MS Windows XP themes where possible
1136 // (notably, wxNotebook pages)
1137 #define wxUSE_UXTHEME_AUTO 1
1138
1139 // ----------------------------------------------------------------------------
1140 // Generic versions of native controls
1141 // ----------------------------------------------------------------------------
1142
1143 // Set this to 1 to be able to use wxDatePickerCtrlGeneric in addition to the
1144 // native wxDatePickerCtrl
1145 //
1146 // Default is 0.
1147 //
1148 // Recommended setting: 0, this is mainly used for testing
1149 #define wxUSE_DATEPICKCTRL_GENERIC 0
1150
1151 // ----------------------------------------------------------------------------
1152 // Crash debugging helpers
1153 // ----------------------------------------------------------------------------
1154
1155 // Set this to 1 to be able to use wxCrashReport::Generate() to create mini
1156 // dumps of your program when it crashes (or at any other moment)
1157 //
1158 // Default is 1 if supported by the compiler (VC++ and recent BC++ only).
1159 //
1160 // Recommended setting: 1, set to 0 if your programs never crash
1161 #define wxUSE_CRASHREPORT 1
1162
1163 // ----------------------------------------------------------------------------
1164 // obsolete settings
1165 // ----------------------------------------------------------------------------
1166
1167 // NB: all settings in this section are obsolete and should not be used/changed
1168 // at all, they will disappear
1169
1170 // Set to 1 to use PenWindows
1171 #define wxUSE_PENWINDOWS 0
1172
1173 // Define 1 to use bitmap messages.
1174 #define wxUSE_BITMAP_MESSAGE 1
1175
1176 #endif // _WX_SETUP_H_
1177