[wxWidgets.git] / wxPython / wxSWIG / Makefile.in

#######################################################################
# $Header$
# Simplified Wrapper and Interface Generator (SWIG)
#
# Makefile for version 1.1
# Dave Beazley
# January 7, 1997
#
# This makefile is now mostly constructed by ./configure.
#
# $Log$
# Revision 1.1  2002/04/29 19:56:47  RD
# Since I have made several changes to SWIG over the years to accomodate
# special cases and other things in wxPython, and since I plan on making
# several more, I've decided to put the SWIG sources in wxPython's CVS
# instead of relying on maintaining patches.  This effectivly becomes a
# fork of an obsolete version of SWIG, :-( but since SWIG 1.3 still
# doesn't have some things I rely on in 1.1, not to mention that my
# custom patches would all have to be redone, I felt that this is the
# easier road to take.
#
# Revision 1.3  1999/08/17 03:31:30  beazley
# Minor cleanup. Removed Perl4
#
# Revision 1.2  1999/02/28 02:44:43  beazley
# Initial cleanup
#
# Revision 1.1.1.1  1999/02/28 02:00:49  beazley
# Swig1.1
#
# Revision 1.1  1996/08/12 01:55:02  dmb
# Initial revision
#
#######################################################################

srcdir = @srcdir@
VPATH = @srcdir@

#
# Set the prefix below to indicate where you want SWIG to install its
# files.   Normally this is /usr/local
#

prefix     = @prefix@
exec_prefix= @exec_prefix@

# Location of the SWIG library.  Is normally put in /usr/local/lib/swig_lib
# The SWIG library contains configuration files and library modules
# so you should install it someplace where it can be easily accessed.

SWIG_LIB = $(prefix)/lib/swig_lib

# Change these prefixes to set where you would like the
# SWIG binary file (swig) and C library (libswig.a) installed.
# Usually you don't need to change these unless you are
# installing SWIG into a CPU dependent directory such as /usr/local/bin/cpu-type/bin
#

BIN_DIR        = $(exec_prefix)/bin
LIB_DIR        = $(exec_prefix)/lib

# Other installation locations.   Shouldn't need to change these unless you want

INCLUDE_DIR    = $(prefix)/include
MAN_DIR        = $(prefix)/man/man1

SHELL  = /bin/sh

# --with-PACKAGE options for configure script.
WITH=

#
#
#
# Rules for creation of a .o file from .cxx

all:		wxswig
		@echo "Compilation complete."

wxswig: 	Makefiles
		@echo "Making the SWIG Parser..."
		@cd SWIG; $(MAKE)
		@echo "Make Modules..."
		@cd Modules; $(MAKE)

Makefiles:	config.status
		@cd SWIG; echo "making Makefile in subdirectory SWIG"; $(MAKE) Makefile
		@cd Modules; echo "making Makefile in subdirectory Modules"; $(MAKE) Makefile

Makefile:	Makefile.in config.status
		CONFIG_FILES=Makefile $(SHELL) config.status

config.status:	$(srcdir)/configure
		if test -f config.status; \
		then $(SHELL) config.status --recheck; \
		     $(SHELL) config.status; \
		else $(SHELL) $(srcdir)/configure $(WITH); \
		fi

.PRECIOUS:	config.status swig

clean:
	rm -f *.o *.so libswig.a swig *~ core
	@cd SWIG; $(MAKE) clean
	@cd Modules; $(MAKE) clean
	@cd Runtime; $(MAKE) clean

nuke: 	clean
	@cd SWIG; $(MAKE) nuke
	@cd Modules; $(MAKE) nuke
	@cd Examples; $(MAKE) nuke
	@cd Tests; $(MAKE) clean
	@cd Runtime; $(MAKE) clean
	rm -f Makefile Makefile.template config.*

doc:	swig
	@echo "Building Documentation for SWIG library..."
	./swig -Iswig_lib -d ./Doc/swiglib ./swig_lib/autodoc.i
	@rm -f swig_lib/autodoc_wrap*


runtime: swig
	@cd Runtime; $(MAKE)

test::
	cd Tests; $(MAKE) parser; $(MAKE) doc; $(MAKE) huge;
	@echo "See test.log for errors"
	@echo "type 'make testclean' to cleanup."

testbuild::
	cd Tests; $(MAKE) build

testall::
	cd Tests; $(MAKE) all; $(MAKE) clean

# Only do this before releasing a distribution

testclean::
	cd Tests; $(MAKE) clean;


## # Install the SWIG program
##
## INSTALL        = ./install-sh -c
## INSTALL_DATA   = ${INSTALL} -m 644
## INSTALL_PROGRAM= ${INSTALL} -m 755
##
## install: install-main install-lib install-runtime
## 	@echo "Installation complete"
##
## install-runtime:
## 	@cd Runtime; $(MAKE) install
##
## smallinstall: install-main
##
## install-main:
## 	@for i in $(LIB_DIR) $(INCLUDE_DIR) $(BIN_DIR) $(prefix)/man $(MAN_DIR); \
## 	do \
## 	  if [ ! -d $$i ] ; then \
## 	         mkdir $$i; \
##                  echo "Making directory $$i"; \
##                  chmod 755 $$i;\
##                  else true; \
##              fi; \
##             done;
## 	@echo "Installing $(BIN_DIR)/swig"
## 	@$(INSTALL_PROGRAM) swig $(BIN_DIR)/swig
## 	@echo "Installing $(LIB_DIR)/libswig.a..."
## 	@$(INSTALL_DATA) libswig.a $(LIB_DIR)/libswig.a
## 	@echo "Installing $(INCLUDE_DIR)/swig.h..."
## 	@$(INSTALL_DATA) Include/swig.h $(INCLUDE_DIR)/swig.h
## 	@echo "Installing $(INCLUDE_DIR)/swigver.h..."
## 	@$(INSTALL_DATA) Include/swigver.h $(INCLUDE_DIR)/swigver.h
## 	@echo "Installing $(MAN_DIR)/swig.1..."
## 	@$(INSTALL_DATA) swig.1 $(MAN_DIR)/swig.1
## install-lib:
## 	@for i in $(SWIG_LIB) ; \
## 	do \
## 	  if [ ! -d $$i ] ; then \
## 	         mkdir $$i; \
##                  echo "Making directory $$i"; \
##                  chmod 755 $$i;\
##                  else true; \
##              fi; \
##             done;
## 	@echo "Installing the SWIG library"
## #	cd $(SWIG_LIB); rm -rf *
## 	@for i in $(SWIG_LIB)/tcl $(SWIG_LIB)/perl5 $(SWIG_LIB)/python $(SWIG_LIB)/guile $(SWIG_LIB)/config ; \
## 	do \
## 	  if [ ! -d $$i ] ; then \
## 	         mkdir $$i; \
##                  echo "Making directory $$i"; \
##                  chmod 755 $$i;\
##                  else true; \
##              fi; \
##             done;
## 	@cd swig_lib; for i in *.i *.swg; \
## 	    do \
## 	    echo "Installing swig_lib/$$i"; \
##             ../$(INSTALL_DATA) $$i $(SWIG_LIB)/$$i; \
## 	    done;
## 	@cd swig_lib/tcl; for i in *.i *.swg Makefile; \
## 	    do \
## 	    echo "Installing swig_lib/tcl/$$i"; \
##             ../../$(INSTALL_DATA) $$i $(SWIG_LIB)/tcl/$$i; \
## 	    done;
## 	@cd swig_lib/perl5; for i in *.i *.swg Makefile Makefile.pl; \
## 	    do \
## 	    echo "Installing swig_lib/perl5/$$i"; \
##             ../../$(INSTALL_DATA) $$i $(SWIG_LIB)/perl5/$$i; \
## 	    done;
## 	@cd swig_lib/python; for i in *.i *.swg Makefile; \
## 	    do \
## 	    echo "Installing swig_lib/python/$$i"; \
##             ../../$(INSTALL_DATA) $$i $(SWIG_LIB)/python/$$i; \
## 	    done;
## 	@cd swig_lib/guile; for i in *.i *.swg; \
## 	    do \
## 	    echo "Installing swig_lib/guile/$$i"; \
##             ../../$(INSTALL_DATA) $$i $(SWIG_LIB)/guile/$$i; \
## 	    done;
## 	@cd swig_lib/config; for i in *.swg; \
## 	    do \
## 	    echo "Installing swig_lib/config/$$i"; \
##             ../../$(INSTALL_DATA) $$i $(SWIG_LIB)/config/$$i; \
## 	    done;
## 	@echo "Installing Makefile"
## 	$(INSTALL_DATA) Makefile.template $(SWIG_LIB)/Makefile
Commit	Line	Data
c90f71dd RD	1	#######################################################################
	2	# $Header$
	3	# Simplified Wrapper and Interface Generator (SWIG)
	4	#
	5	# Makefile for version 1.1
	6	# Dave Beazley
	7	# January 7, 1997
	8	#
	9	# This makefile is now mostly constructed by ./configure.
	10	#
	11	# $Log$
	12	# Revision 1.1 2002/04/29 19:56:47 RD
	13	# Since I have made several changes to SWIG over the years to accomodate
	14	# special cases and other things in wxPython, and since I plan on making
	15	# several more, I've decided to put the SWIG sources in wxPython's CVS
	16	# instead of relying on maintaining patches. This effectivly becomes a
	17	# fork of an obsolete version of SWIG, :-( but since SWIG 1.3 still
	18	# doesn't have some things I rely on in 1.1, not to mention that my
	19	# custom patches would all have to be redone, I felt that this is the
	20	# easier road to take.
	21	#
	22	# Revision 1.3 1999/08/17 03:31:30 beazley
	23	# Minor cleanup. Removed Perl4
	24	#
	25	# Revision 1.2 1999/02/28 02:44:43 beazley
	26	# Initial cleanup
	27	#
	28	# Revision 1.1.1.1 1999/02/28 02:00:49 beazley
	29	# Swig1.1
	30	#
	31	# Revision 1.1 1996/08/12 01:55:02 dmb
	32	# Initial revision
	33	#
	34	#######################################################################
	35
	36	srcdir = @srcdir@
	37	VPATH = @srcdir@
	38
	39	#
	40	# Set the prefix below to indicate where you want SWIG to install its
	41	# files. Normally this is /usr/local
	42	#
	43
	44	prefix = @prefix@
	45	exec_prefix= @exec_prefix@
	46
	47	# Location of the SWIG library. Is normally put in /usr/local/lib/swig_lib
	48	# The SWIG library contains configuration files and library modules
	49	# so you should install it someplace where it can be easily accessed.
	50
	51	SWIG_LIB = $(prefix)/lib/swig_lib
	52
	53	# Change these prefixes to set where you would like the
	54	# SWIG binary file (swig) and C library (libswig.a) installed.
	55	# Usually you don't need to change these unless you are
	56	# installing SWIG into a CPU dependent directory such as /usr/local/bin/cpu-type/bin
	57	#
	58
	59	BIN_DIR = $(exec_prefix)/bin
	60	LIB_DIR = $(exec_prefix)/lib
	61
	62	# Other installation locations. Shouldn't need to change these unless you want
	63
	64	INCLUDE_DIR = $(prefix)/include
65	MAN_DIR = $(prefix)/man/man1
66
67	SHELL = /bin/sh
68
69	# --with-PACKAGE options for configure script.
70	WITH=
71
72	#
73	#
74	#
75	# Rules for creation of a .o file from .cxx
76
77	all: wxswig
78	@echo "Compilation complete."
79
80	wxswig: Makefiles
81	@echo "Making the SWIG Parser..."
82	@cd SWIG; $(MAKE)
83	@echo "Make Modules..."
84	@cd Modules; $(MAKE)
85
86	Makefiles: config.status
87	@cd SWIG; echo "making Makefile in subdirectory SWIG"; $(MAKE) Makefile
88	@cd Modules; echo "making Makefile in subdirectory Modules"; $(MAKE) Makefile
89
90	Makefile: Makefile.in config.status
91	CONFIG_FILES=Makefile $(SHELL) config.status
92
93	config.status: $(srcdir)/configure
94	if test -f config.status; \
95	then $(SHELL) config.status --recheck; \
96	$(SHELL) config.status; \
97	else $(SHELL) $(srcdir)/configure $(WITH); \
98	fi
99
100	.PRECIOUS: config.status swig
101
102	clean:
103	rm -f .o .so libswig.a swig *~ core
104	@cd SWIG; $(MAKE) clean
105	@cd Modules; $(MAKE) clean
106	@cd Runtime; $(MAKE) clean
107
108	nuke: clean
109	@cd SWIG; $(MAKE) nuke
110	@cd Modules; $(MAKE) nuke
111	@cd Examples; $(MAKE) nuke
112	@cd Tests; $(MAKE) clean
113	@cd Runtime; $(MAKE) clean
114	rm -f Makefile Makefile.template config.*
115
116	doc: swig
117	@echo "Building Documentation for SWIG library..."
118	./swig -Iswig_lib -d ./Doc/swiglib ./swig_lib/autodoc.i
119	@rm -f swig_lib/autodoc_wrap*
120
121
122	runtime: swig
123	@cd Runtime; $(MAKE)
124
125	test::
126	cd Tests; $(MAKE) parser; $(MAKE) doc; $(MAKE) huge;
127	@echo "See test.log for errors"
128	@echo "type 'make testclean' to cleanup."
129
130	testbuild::
131	cd Tests; $(MAKE) build
132
133	testall::
134	cd Tests; $(MAKE) all; $(MAKE) clean
135
136	# Only do this before releasing a distribution
137
138	testclean::
139	cd Tests; $(MAKE) clean;
140
141
142	## # Install the SWIG program
143	##
144	## INSTALL = ./install-sh -c
145	## INSTALL_DATA = ${INSTALL} -m 644
146	## INSTALL_PROGRAM= ${INSTALL} -m 755
147	##
148	## install: install-main install-lib install-runtime
149	## @echo "Installation complete"
150	##
151	## install-runtime:
152	## @cd Runtime; $(MAKE) install
153	##
154	## smallinstall: install-main
155	##
156	## install-main:
157	## @for i in $(LIB_DIR) $(INCLUDE_DIR) $(BIN_DIR) $(prefix)/man $(MAN_DIR); \
158	## do \
159	## if [ ! -d $$i ] ; then \
160	## mkdir $$i; \
161	## echo "Making directory $$i"; \
162	## chmod 755 $$i;\
163	## else true; \
164	## fi; \
165	## done;
166	## @echo "Installing $(BIN_DIR)/swig"
167	## @$(INSTALL_PROGRAM) swig $(BIN_DIR)/swig
168	## @echo "Installing $(LIB_DIR)/libswig.a..."
169	## @$(INSTALL_DATA) libswig.a $(LIB_DIR)/libswig.a
170	## @echo "Installing $(INCLUDE_DIR)/swig.h..."
171	## @$(INSTALL_DATA) Include/swig.h $(INCLUDE_DIR)/swig.h
172	## @echo "Installing $(INCLUDE_DIR)/swigver.h..."
173	## @$(INSTALL_DATA) Include/swigver.h $(INCLUDE_DIR)/swigver.h
174	## @echo "Installing $(MAN_DIR)/swig.1..."
175	## @$(INSTALL_DATA) swig.1 $(MAN_DIR)/swig.1
176	## install-lib:
177	## @for i in $(SWIG_LIB) ; \
178	## do \
179	## if [ ! -d $$i ] ; then \
180	## mkdir $$i; \
181	## echo "Making directory $$i"; \
182	## chmod 755 $$i;\
183	## else true; \
184	## fi; \
185	## done;
186	## @echo "Installing the SWIG library"
187	## # cd $(SWIG_LIB); rm -rf *
188	## @for i in $(SWIG_LIB)/tcl $(SWIG_LIB)/perl5 $(SWIG_LIB)/python $(SWIG_LIB)/guile $(SWIG_LIB)/config ; \
189	## do \
190	## if [ ! -d $$i ] ; then \
191	## mkdir $$i; \
192	## echo "Making directory $$i"; \
193	## chmod 755 $$i;\
194	## else true; \
195	## fi; \
196	## done;
197	## @cd swig_lib; for i in .i .swg; \
198	## do \
199	## echo "Installing swig_lib/$$i"; \
200	## ../$(INSTALL_DATA) $$i $(SWIG_LIB)/$$i; \
201	## done;
202	## @cd swig_lib/tcl; for i in .i .swg Makefile; \
203	## do \
204	## echo "Installing swig_lib/tcl/$$i"; \
205	## ../../$(INSTALL_DATA) $$i $(SWIG_LIB)/tcl/$$i; \
206	## done;
207	## @cd swig_lib/perl5; for i in .i .swg Makefile Makefile.pl; \
208	## do \
209	## echo "Installing swig_lib/perl5/$$i"; \
210	## ../../$(INSTALL_DATA) $$i $(SWIG_LIB)/perl5/$$i; \
211	## done;
212	## @cd swig_lib/python; for i in .i .swg Makefile; \
213	## do \
214	## echo "Installing swig_lib/python/$$i"; \
215	## ../../$(INSTALL_DATA) $$i $(SWIG_LIB)/python/$$i; \
216	## done;
217	## @cd swig_lib/guile; for i in .i .swg; \
218	## do \
219	## echo "Installing swig_lib/guile/$$i"; \
220	## ../../$(INSTALL_DATA) $$i $(SWIG_LIB)/guile/$$i; \
221	## done;
222	## @cd swig_lib/config; for i in *.swg; \
223	## do \
224	## echo "Installing swig_lib/config/$$i"; \
225	## ../../$(INSTALL_DATA) $$i $(SWIG_LIB)/config/$$i; \
226	## done;
227	## @echo "Installing Makefile"
228	## $(INSTALL_DATA) Makefile.template $(SWIG_LIB)/Makefile
229
230
231