src/redis-cli.c

   1 /* Redis CLI (command line interface)
   2  *
   3  * Copyright (c) 2009-2010, Salvatore Sanfilippo <antirez at gmail dot com>
   4  * All rights reserved.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *
   9  *   * Redistributions of source code must retain the above copyright notice,
  10  *     this list of conditions and the following disclaimer.
  11  *   * Redistributions in binary form must reproduce the above copyright
  12  *     notice, this list of conditions and the following disclaimer in the
  13  *     documentation and/or other materials provided with the distribution.
  14  *   * Neither the name of Redis nor the names of its contributors may be used
  15  *     to endorse or promote products derived from this software without
  16  *     specific prior written permission.
  17  *
  18  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  19  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  21  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  22  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  23  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  24  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  25  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  26  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  27  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  28  * POSSIBILITY OF SUCH DAMAGE.
  29  */
  30
  31 #include "fmacros.h"
  32 #include "version.h"
  33
  34 #include <stdio.h>
  35 #include <string.h>
  36 #include <stdlib.h>
  37 #include <unistd.h>
  38 #include <ctype.h>
  39 #include <errno.h>
  40 #include <sys/stat.h>
  41
  42 #include "anet.h"
  43 #include "sds.h"
  44 #include "adlist.h"
  45 #include "zmalloc.h"
  46 #include "linenoise.h"
  47
  48 #define REDIS_CMD_INLINE 1
  49 #define REDIS_CMD_BULK 2
  50 #define REDIS_CMD_MULTIBULK 4
  51
  52 #define REDIS_NOTUSED(V) ((void) V)
  53
  54 static struct config {
  55     char *hostip;
  56     int hostport;
  57     long repeat;
  58     int dbnum;
  59     int interactive;
  60     int shutdown;
  61     int monitor_mode;
  62     int pubsub_mode;
  63     int raw_output; /* output mode per command */
  64     int tty; /* flag for default output format */
  65     int stdinarg; /* get last arg from stdin. (-x option) */
  66     char mb_sep;
  67     char *auth;
  68     char *historyfile;
  69 } config;
  70
  71 static int cliReadReply(int fd);
  72 static void usage();
  73
  74 /* Connect to the client. If force is not zero the connection is performed
  75  * even if there is already a connected socket. */
  76 static int cliConnect(int force) {
  77     char err[ANET_ERR_LEN];
  78     static int fd = ANET_ERR;
  79
  80     if (fd == ANET_ERR || force) {
  81         if (force) close(fd);
  82         fd = anetTcpConnect(err,config.hostip,config.hostport);
  83         if (fd == ANET_ERR) {
  84             fprintf(stderr, "Could not connect to Redis at %s:%d: %s", config.hostip, config.hostport, err);
  85             return -1;
  86         }
  87         anetTcpNoDelay(NULL,fd);
  88     }
  89     return fd;
  90 }
  91
  92 static sds cliReadLine(int fd) {
  93     sds line = sdsempty();
  94
  95     while(1) {
  96         char c;
  97         ssize_t ret;
  98
  99         ret = read(fd,&c,1);
 100         if (ret <= 0) {
 101             sdsfree(line);
 102             return NULL;
 103         } else if ((ret == 0) || (c == '\n')) {
 104             break;
 105         } else {
 106             line = sdscatlen(line,&c,1);
 107         }
 108     }
 109     return sdstrim(line,"\r\n");
 110 }
 111
 112 static int cliReadSingleLineReply(int fd, int quiet) {
 113     sds reply = cliReadLine(fd);
 114
 115     if (reply == NULL) return 1;
 116     if (!quiet)
 117         printf("%s", reply);
 118     sdsfree(reply);
 119     return 0;
 120 }
 121
 122 static void printStringRepr(char *s, int len) {
 123     printf("\"");
 124     while(len--) {
 125         switch(*s) {
 126         case '\\':
 127         case '"':
 128             printf("\\%c",*s);
 129             break;
 130         case '\n': printf("\\n"); break;
 131         case '\r': printf("\\r"); break;
 132         case '\t': printf("\\t"); break;
 133         case '\a': printf("\\a"); break;
 134         case '\b': printf("\\b"); break;
 135         default:
 136             if (isprint(*s))
 137                 printf("%c",*s);
 138             else
 139                 printf("\\x%02x",(unsigned char)*s);
 140             break;
 141         }
 142         s++;
 143     }
 144     printf("\"");
 145 }
 146
 147 static int cliReadBulkReply(int fd) {
 148     sds replylen = cliReadLine(fd);
 149     char *reply, crlf[2];
 150     int bulklen;
 151
 152     if (replylen == NULL) return 1;
 153     bulklen = atoi(replylen);
 154     if (bulklen == -1) {
 155         sdsfree(replylen);
 156         printf("(nil)\n");
 157         return 0;
 158     }
 159     reply = zmalloc(bulklen);
 160     anetRead(fd,reply,bulklen);
 161     anetRead(fd,crlf,2);
 162     if (config.raw_output || !config.tty) {
 163         if (bulklen && fwrite(reply,bulklen,1,stdout) == 0) {
 164             zfree(reply);
 165             return 1;
 166         }
 167     } else {
 168         /* If you are producing output for the standard output we want
 169          * a more interesting output with quoted characters and so forth */
 170         printStringRepr(reply,bulklen);
 171     }
 172     zfree(reply);
 173     return 0;
 174 }
 175
 176 static int cliReadMultiBulkReply(int fd) {
 177     sds replylen = cliReadLine(fd);
 178     int elements, c = 1;
 179     int retval = 0;
 180
 181     if (replylen == NULL) return 1;
 182     elements = atoi(replylen);
 183     if (elements == -1) {
 184         sdsfree(replylen);
 185         printf("(nil)\n");
 186         return 0;
 187     }
 188     if (elements == 0) {
 189         printf("(empty list or set)\n");
 190     }
 191     while(elements--) {
 192         if (config.tty) printf("%d. ", c);
 193         if (cliReadReply(fd)) retval = 1;
 194         if (elements) printf("%c",config.mb_sep);
 195         c++;
 196     }
 197     return retval;
 198 }
 199
 200 static int cliReadReply(int fd) {
 201     char type;
 202     int nread;
 203
 204     if ((nread = anetRead(fd,&type,1)) <= 0) {
 205         if (config.shutdown) return 0;
 206         if (config.interactive &&
 207             (nread == 0 || (nread == -1 && errno == ECONNRESET)))
 208         {
 209             return ECONNRESET;
 210         } else {
 211             printf("I/O error while reading from socket: %s",strerror(errno));
 212             exit(1);
 213         }
 214     }
 215     switch(type) {
 216     case '-':
 217         if (config.tty) printf("(error) ");
 218         cliReadSingleLineReply(fd,0);
 219         return 1;
 220     case '+':
 221         return cliReadSingleLineReply(fd,0);
 222     case ':':
 223         if (config.tty) printf("(integer) ");
 224         return cliReadSingleLineReply(fd,0);
 225     case '$':
 226         return cliReadBulkReply(fd);
 227     case '*':
 228         return cliReadMultiBulkReply(fd);
 229     default:
 230         printf("protocol error, got '%c' as reply type byte", type);
 231         return 1;
 232     }
 233 }
 234
 235 static int selectDb(int fd) {
 236     int retval;
 237     sds cmd;
 238     char type;
 239
 240     if (config.dbnum == 0)
 241         return 0;
 242
 243     cmd = sdsempty();
 244     cmd = sdscatprintf(cmd,"SELECT %d\r\n",config.dbnum);
 245     anetWrite(fd,cmd,sdslen(cmd));
 246     anetRead(fd,&type,1);
 247     if (type <= 0 || type != '+') return 1;
 248     retval = cliReadSingleLineReply(fd,1);
 249     if (retval) {
 250         return retval;
 251     }
 252     return 0;
 253 }
 254
 255 static void showInteractiveHelp(void) {
 256     printf(
 257     "\n"
 258     "Welcome to redis-cli " REDIS_VERSION "!\n"
 259     "Just type any valid Redis command to see a pretty printed output.\n"
 260     "\n"
 261     "It is possible to quote strings, like in:\n"
 262     "  set \"my key\" \"some string \\xff\\n\"\n"
 263     "\n"
 264     "You can find a list of valid Redis commands at\n"
 265     "  http://code.google.com/p/redis/wiki/CommandReference\n"
 266     "\n"
 267     "Note: redis-cli supports line editing, use up/down arrows for history."
 268     "\n\n");
 269 }
 270
 271 static int cliSendCommand(int argc, char **argv, int repeat) {
 272     char *command = argv[0];
 273     int fd, j, retval = 0;
 274     sds cmd;
 275
 276     config.raw_output = !strcasecmp(command,"info");
 277     if (!strcasecmp(command,"help")) {
 278         showInteractiveHelp();
 279         return 0;
 280     }
 281     if (!strcasecmp(command,"shutdown")) config.shutdown = 1;
 282     if (!strcasecmp(command,"monitor")) config.monitor_mode = 1;
 283     if (!strcasecmp(command,"subscribe") ||
 284         !strcasecmp(command,"psubscribe")) config.pubsub_mode = 1;
 285     if ((fd = cliConnect(0)) == -1) return 1;
 286
 287     /* Select db number */
 288     retval = selectDb(fd);
 289     if (retval) {
 290         fprintf(stderr,"Error setting DB num\n");
 291         return 1;
 292     }
 293
 294     /* Build the command to send */
 295     cmd = sdscatprintf(sdsempty(),"*%d\r\n",argc);
 296     for (j = 0; j < argc; j++) {
 297         cmd = sdscatprintf(cmd,"$%lu\r\n",
 298             (unsigned long)sdslen(argv[j]));
 299         cmd = sdscatlen(cmd,argv[j],sdslen(argv[j]));
 300         cmd = sdscatlen(cmd,"\r\n",2);
 301     }
 302
 303     while(repeat--) {
 304         anetWrite(fd,cmd,sdslen(cmd));
 305         while (config.monitor_mode) {
 306             if (cliReadSingleLineReply(fd,0)) exit(1);
 307             printf("\n");
 308         }
 309
 310         if (config.pubsub_mode) {
 311             printf("Reading messages... (press Ctrl-c to quit)\n");
 312             while (1) {
 313                 cliReadReply(fd);
 314                 printf("\n\n");
 315             }
 316         }
 317
 318         retval = cliReadReply(fd);
 319         if (!config.raw_output && config.tty) printf("\n");
 320         if (retval) return retval;
 321     }
 322     return 0;
 323 }
 324
 325 static int parseOptions(int argc, char **argv) {
 326     int i;
 327
 328     for (i = 1; i < argc; i++) {
 329         int lastarg = i==argc-1;
 330
 331         if (!strcmp(argv[i],"-h") && !lastarg) {
 332             char *ip = zmalloc(32);
 333             if (anetResolve(NULL,argv[i+1],ip) == ANET_ERR) {
 334                 printf("Can't resolve %s\n", argv[i]);
 335                 exit(1);
 336             }
 337             config.hostip = ip;
 338             i++;
 339         } else if (!strcmp(argv[i],"-h") && lastarg) {
 340             usage();
 341         } else if (!strcmp(argv[i],"-x")) {
 342             config.stdinarg = 1;
 343         } else if (!strcmp(argv[i],"-p") && !lastarg) {
 344             config.hostport = atoi(argv[i+1]);
 345             i++;
 346         } else if (!strcmp(argv[i],"-r") && !lastarg) {
 347             config.repeat = strtoll(argv[i+1],NULL,10);
 348             i++;
 349         } else if (!strcmp(argv[i],"-n") && !lastarg) {
 350             config.dbnum = atoi(argv[i+1]);
 351             i++;
 352         } else if (!strcmp(argv[i],"-a") && !lastarg) {
 353             config.auth = argv[i+1];
 354             i++;
 355         } else if (!strcmp(argv[i],"-i")) {
 356             fprintf(stderr,
 357 "Starting interactive mode using -i is deprecated. Interactive mode is started\n"
 358 "by default when redis-cli is executed without a command to execute.\n"
 359             );
 360         } else if (!strcmp(argv[i],"-c")) {
 361             fprintf(stderr,
 362 "Reading last argument from standard input using -c is deprecated.\n"
 363 "When standard input is connected to a pipe or regular file, it is\n"
 364 "automatically used as last argument.\n"
 365             );
 366         } else if (!strcmp(argv[i],"-v")) {
 367             printf("redis-cli shipped with Redis verison %s\n", REDIS_VERSION);
 368             exit(0);
 369         } else {
 370             break;
 371         }
 372     }
 373     return i;
 374 }
 375
 376 static sds readArgFromStdin(void) {
 377     char buf[1024];
 378     sds arg = sdsempty();
 379
 380     while(1) {
 381         int nread = read(fileno(stdin),buf,1024);
 382
 383         if (nread == 0) break;
 384         else if (nread == -1) {
 385             perror("Reading from standard input");
 386             exit(1);
 387         }
 388         arg = sdscatlen(arg,buf,nread);
 389     }
 390     return arg;
 391 }
 392
 393 static void usage() {
 394     fprintf(stderr, "usage: redis-cli [-iv] [-h host] [-p port] [-a authpw] [-r repeat_times] [-n db_num] cmd arg1 arg2 arg3 ... argN\n");
 395     fprintf(stderr, "usage: echo \"argN\" | redis-cli -x [options] cmd arg1 arg2 ... arg(N-1)\n\n");
 396     fprintf(stderr, "example: cat /etc/passwd | redis-cli -x set my_passwd\n");
 397     fprintf(stderr, "example: redis-cli get my_passwd\n");
 398     fprintf(stderr, "example: redis-cli -r 100 lpush mylist x\n");
 399     fprintf(stderr, "\nRun in interactive mode: redis-cli -i or just don't pass any command\n");
 400     exit(1);
 401 }
 402
 403 /* Turn the plain C strings into Sds strings */
 404 static char **convertToSds(int count, char** args) {
 405   int j;
 406   char **sds = zmalloc(sizeof(char*)*count);
 407
 408   for(j = 0; j < count; j++)
 409     sds[j] = sdsnew(args[j]);
 410
 411   return sds;
 412 }
 413
 414 #define LINE_BUFLEN 4096
 415 static void repl() {
 416     int argc, j;
 417     char *line;
 418     sds *argv;
 419
 420     config.interactive = 1;
 421     while((line = linenoise("redis> ")) != NULL) {
 422         if (line[0] != '\0') {
 423             argv = sdssplitargs(line,&argc);
 424             linenoiseHistoryAdd(line);
 425             if (config.historyfile) linenoiseHistorySave(config.historyfile);
 426             if (argv == NULL) {
 427                 printf("Invalid argument(s)\n");
 428                 continue;
 429             } else if (argc > 0) {
 430                 if (strcasecmp(argv[0],"quit") == 0 ||
 431                     strcasecmp(argv[0],"exit") == 0)
 432                 {
 433                     exit(0);
 434                 } else {
 435                     int err;
 436
 437                     if ((err = cliSendCommand(argc, argv, 1)) != 0) {
 438                         if (err == ECONNRESET) {
 439                             printf("Reconnecting... ");
 440                             fflush(stdout);
 441                             if (cliConnect(1) == -1) exit(1);
 442                             printf("OK\n");
 443                             cliSendCommand(argc,argv,1);
 444                         }
 445                     }
 446                 }
 447             }
 448             /* Free the argument vector */
 449             for (j = 0; j < argc; j++)
 450                 sdsfree(argv[j]);
 451             zfree(argv);
 452         }
 453         /* linenoise() returns malloc-ed lines like readline() */
 454         free(line);
 455     }
 456     exit(0);
 457 }
 458
 459 static int noninteractive(int argc, char **argv) {
 460     int retval = 0;
 461     if (config.stdinarg) {
 462         argv = zrealloc(argv, (argc+1)*sizeof(char*));
 463         argv[argc] = readArgFromStdin();
 464         retval = cliSendCommand(argc+1, argv, config.repeat);
 465     } else {
 466         /* stdin is probably a tty, can be tested with S_ISCHR(s.st_mode) */
 467         retval = cliSendCommand(argc, argv, config.repeat);
 468     }
 469     return retval;
 470 }
 471
 472 int main(int argc, char **argv) {
 473     int firstarg;
 474
 475     config.hostip = "127.0.0.1";
 476     config.hostport = 6379;
 477     config.repeat = 1;
 478     config.dbnum = 0;
 479     config.interactive = 0;
 480     config.shutdown = 0;
 481     config.monitor_mode = 0;
 482     config.pubsub_mode = 0;
 483     config.raw_output = 0;
 484     config.stdinarg = 0;
 485     config.auth = NULL;
 486     config.historyfile = NULL;
 487     config.tty = isatty(fileno(stdout)) || (getenv("FAKETTY") != NULL);
 488     config.mb_sep = '\n';
 489
 490     if (getenv("HOME") != NULL) {
 491         config.historyfile = malloc(256);
 492         snprintf(config.historyfile,256,"%s/.rediscli_history",getenv("HOME"));
 493         linenoiseHistoryLoad(config.historyfile);
 494     }
 495
 496     firstarg = parseOptions(argc,argv);
 497     argc -= firstarg;
 498     argv += firstarg;
 499
 500     if (config.auth != NULL) {
 501         char *authargv[2];
 502         int dbnum = config.dbnum;
 503
 504         /* We need to save the real configured database number and set it to
 505          * zero here, otherwise cliSendCommand() will try to perform the
 506          * SELECT command before the authentication, and it will fail. */
 507         config.dbnum = 0;
 508         authargv[0] = "AUTH";
 509         authargv[1] = config.auth;
 510         cliSendCommand(2, convertToSds(2, authargv), 1);
 511         config.dbnum = dbnum; /* restore the right DB number */
 512     }
 513
 514     /* Start interactive mode when no command is provided */
 515     if (argc == 0) repl();
 516     /* Otherwise, we have some arguments to execute */
 517     return noninteractive(argc,convertToSds(argc,argv));
 518 }