+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+## by inline-source v2014-01-03.01
-# libtool (GNU libtool) 2.4.2
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-# --config show all configuration variables
-# --debug enable verbose shell tracing
-# -n, --dry-run display commands without modifying any files
-# --features display basic configuration information and exit
-# --mode=MODE use operation mode MODE
-# --preserve-dup-deps don't remove duplicate dependency libraries
-# --quiet, --silent don't print informational messages
-# --no-quiet, --no-silent
-# print informational messages (default)
-# --no-warn don't display warning messages
-# --tag=TAG use configuration variables from tag TAG
-# -v, --verbose print more informational messages than default
-# --no-verbose don't print the extra informational messages
-# --version print version information
-# -h, --help, --help-all print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-# clean remove files from the build directory
-# compile compile a source file into a libtool object
-# execute automatically set library path, then run a program
-# finish complete the installation of libtool libraries
-# install install libraries or executables
-# link create a library or an executable
-# uninstall remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE. When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-# host-triplet: $host
-# shell: $SHELL
-# compiler: $LTCC
-# compiler flags: $LTCFLAGS
-# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.4.2
-# automake: $automake_version
-# autoconf: $autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
PROGRAM=libtool
PACKAGE=libtool
-VERSION=2.4.2
-TIMESTAMP=""
-package_revision=1.3337
+VERSION=2.4.6
+package_revision=2.4.6
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
- lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ eval "if test set = \"\${$_G_var+set}\"; then
+ save_$_G_var=\$$_G_var
+ $_G_var=C
+ export $_G_var
+ _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+ _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
fi"
done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
-$lt_unset CDPATH
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp $nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+ _G_progs_list=$1
+ _G_check_func=$2
+ _G_PATH=${3-"$PATH"}
+
+ _G_path_prog_max=0
+ _G_path_prog_found=false
+ _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+ for _G_dir in $_G_PATH; do
+ IFS=$_G_save_IFS
+ test -z "$_G_dir" && _G_dir=.
+ for _G_prog_name in $_G_progs_list; do
+ for _exeext in '' .EXE; do
+ _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+ func_executable_p "$_G_path_prog" || continue
+ case `"$_G_path_prog" --version 2>&1` in
+ *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+ *) $_G_check_func $_G_path_prog
+ func_path_progs_result=$func_check_prog_result
+ ;;
+ esac
+ $_G_path_prog_found && break 3
+ done
+ done
+ done
+ IFS=$_G_save_IFS
+ test -z "$func_path_progs_result" && {
+ echo "no acceptable sed could be found in \$PATH" >&2
+ exit 1
+ }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+ _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for _G_i in 1 2 3 4 5 6 7; do
+ _G_sed_script=$_G_sed_script$nl$_G_sed_script
+ done
+ echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+ _G_sed_script=
+
+ func_check_prog_sed ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo '' >> conftest.nl
+ "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+ rm -f conftest.sed
+ SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+ func_check_prog_grep ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ _G_path_prog_max=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo 'GREP' >> conftest.nl
+ "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+ GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables. These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
: ${MAKE="make"}
: ${MKDIR="mkdir"}
: ${MV="mv -f"}
: ${RM="rm -f"}
: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-} # func_dirname may be replaced by extended shell implementation
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
- func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same. If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion. Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+ s/$_G_bs4/&\\
+/g
+ s/^$_G_bs2$_G_dollar/$_G_bs&/
+ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+ s/\n//g"
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
- esac
-} # func_stripname may be replaced by extended shell implementation
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
- s@/\./@/@g
- t dotsl
- s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-# value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
- # Start from root dir and reassemble the path.
- func_normal_abspath_result=
- func_normal_abspath_tpath=$1
- func_normal_abspath_altnamespace=
- case $func_normal_abspath_tpath in
- "")
- # Empty path, that just means $cwd.
- func_stripname '' '/' "`pwd`"
- func_normal_abspath_result=$func_stripname_result
- return
- ;;
- # The next three entries are used to spot a run of precisely
- # two leading slashes without using negated character classes;
- # we take advantage of case's first-match behaviour.
- ///*)
- # Unusual form of absolute path, do nothing.
- ;;
- //*)
- # Not necessarily an ordinary path; POSIX reserves leading '//'
- # and for example Cygwin uses it to access remote file shares
- # over CIFS/SMB, so we conserve a leading double slash if found.
- func_normal_abspath_altnamespace=/
- ;;
- /*)
- # Absolute path, do nothing.
- ;;
- *)
- # Relative path, prepend $cwd.
- func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
- ;;
- esac
- # Cancel out all the simple stuff to save iterations. We also want
- # the path to end with a slash for ease of parsing, so make sure
- # there is one (and only one) here.
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
- while :; do
- # Processed it all yet?
- if test "$func_normal_abspath_tpath" = / ; then
- # If we ascended to the root using ".." the result may be empty now.
- if test -z "$func_normal_abspath_result" ; then
- func_normal_abspath_result=/
- fi
- break
- fi
- func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcar"`
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcdr"`
- # Figure out what to do with it
- case $func_normal_abspath_tcomponent in
- "")
- # Trailing empty path component, ignore it.
- ;;
- ..)
- # Parent dir; strip last assembled component from result.
- func_dirname "$func_normal_abspath_result"
- func_normal_abspath_result=$func_dirname_result
- ;;
- *)
- # Actual path component, append it.
- func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
- ;;
- esac
- done
- # Restore leading double-slash if one was found on entry.
- func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-# value returned in "$func_relative_path_result"
-func_relative_path ()
-{
- func_relative_path_result=
- func_normal_abspath "$1"
- func_relative_path_tlibdir=$func_normal_abspath_result
- func_normal_abspath "$2"
- func_relative_path_tbindir=$func_normal_abspath_result
-
- # Ascend the tree starting from libdir
- while :; do
- # check if we have found a prefix of bindir
- case $func_relative_path_tbindir in
- $func_relative_path_tlibdir)
- # found an exact match
- func_relative_path_tcancelled=
- break
- ;;
- $func_relative_path_tlibdir*)
- # found a matching prefix
- func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
- func_relative_path_tcancelled=$func_stripname_result
- if test -z "$func_relative_path_result"; then
- func_relative_path_result=.
- fi
- break
- ;;
- *)
- func_dirname $func_relative_path_tlibdir
- func_relative_path_tlibdir=${func_dirname_result}
- if test "x$func_relative_path_tlibdir" = x ; then
- # Have to descend all the way to the root!
- func_relative_path_result=../$func_relative_path_result
- func_relative_path_tcancelled=$func_relative_path_tbindir
- break
- fi
- func_relative_path_result=../$func_relative_path_result
- ;;
- esac
- done
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
- # Now calculate path; take care to avoid doubling-up slashes.
- func_stripname '' '/' "$func_relative_path_result"
- func_relative_path_result=$func_stripname_result
- func_stripname '/' '/' "$func_relative_path_tcancelled"
- if test "x$func_stripname_result" != x ; then
- func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
- fi
+# By convention, finish your script with:
+#
+# exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
- # Normalisation. If bindir is libdir, return empty string,
- # else relative path ending with a slash; either way, target
- # file name can be directly appended.
- if test ! -z "$func_relative_path_result"; then
- func_stripname './' '' "$func_relative_path_result/"
- func_relative_path_result=$func_stripname_result
- fi
-}
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
-# Make sure we have an absolute path for reexecution:
+# Make sure we have an absolute progpath for reexecution:
case $progpath in
[\\/]*|[A-Za-z]:\\*) ;;
*[\\/]*)
- progdir=$func_dirname_result
+ progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
progdir=`cd "$progdir" && pwd`
- progpath="$progdir/$progname"
+ progpath=$progdir/$progname
;;
*)
- save_IFS="$IFS"
+ _G_IFS=$IFS
IFS=${PATH_SEPARATOR-:}
for progdir in $PATH; do
- IFS="$save_IFS"
+ IFS=$_G_IFS
test -x "$progdir/$progname" && break
done
- IFS="$save_IFS"
+ IFS=$_G_IFS
test -n "$progdir" || progdir=`pwd`
- progpath="$progdir/$progname"
+ progpath=$progdir/$progname
;;
esac
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes. A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
- s/$bs4/&\\
-/g
- s/^$bs2$dollar/$bs&/
- s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
- s/\n//g"
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
-# Standard options:
opt_dry_run=false
-opt_help=false
opt_quiet=false
opt_verbose=false
-opt_warning=:
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
-}
+# Categories 'all' and 'none' are always available. Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
- $opt_verbose && func_echo ${1+"$@"}
+# By default, display warnings according to 'opt_warning_types'. Set
+# 'warning_func' to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
- # A bug in bash halts the script if the last line of a function
- # fails when set -e is in force, so we need another command to
- # work around that:
- :
-}
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO "$*"
-}
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
-{
- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
- # bash bug again:
- :
-}
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
{
- func_error ${1+"$@"}
- exit $EXIT_FAILURE
-}
+ $debug_cmd
+
+ test -t 1 && {
+ # COLORTERM and USE_ANSI_COLORS environment variables take
+ # precedence, because most terminfo databases neglect to describe
+ # whether color sequences are supported.
+ test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+ if test 1 = "$USE_ANSI_COLORS"; then
+ # Standard ANSI escape sequences
+ tc_reset='\e[0m'
+ tc_bold='\e[1m'; tc_standout='\e[7m'
+ tc_red='\e[31m'; tc_green='\e[32m'
+ tc_blue='\e[34m'; tc_cyan='\e[36m'
+ else
+ # Otherwise trust the terminfo database after all.
+ test -n "`tput sgr0 2>/dev/null`" && {
+ tc_reset=`tput sgr0`
+ test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+ tc_standout=$tc_bold
+ test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+ test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+ test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+ test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+ test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+ }
+ fi
+ }
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
- func_error ${1+"$@"}
- func_fatal_error "$help"
+ require_term_colors=:
}
-help="Try \`$progname --help' for more information." ## default
-# func_grep expression filename
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+ # We should try to minimise forks, especially on Windows where they are
+ # unreasonably slow, so skip the feature probes when bash or zsh are
+ # being used:
+ if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+ : ${_G_HAVE_ARITH_OP="yes"}
+ : ${_G_HAVE_XSI_OPS="yes"}
+ # The += operator was introduced in bash 3.1
+ case $BASH_VERSION in
+ [12].* | 3.0 | 3.0*) ;;
+ *)
+ : ${_G_HAVE_PLUSEQ_OP="yes"}
+ ;;
+ esac
+ fi
+
+ # _G_HAVE_PLUSEQ_OP
+ # Can be empty, in which case the shell is probed, "yes" if += is
+ # useable or anything else if it does not work.
+ test -z "$_G_HAVE_PLUSEQ_OP" \
+ && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+ && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_append ()
+ {
+ $debug_cmd
+
+ eval "$1+=\$2"
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_append ()
+ {
+ $debug_cmd
+
+ eval "$1=\$$1\$2"
+ }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+ eval 'func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1+=\\ \$func_quote_for_eval_result"
+ }'
+else
+ func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1=\$$1\\ \$func_quote_for_eval_result"
+ }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE. For example:
+#
+# func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+ $debug_cmd
+
+ eval _G_current_value='`$ECHO $'$1'`'
+ _G_delim=`expr "$2" : '\(.\)'`
+
+ case $_G_delim$_G_current_value$_G_delim in
+ *"$2$_G_delim"*) ;;
+ *) func_append "$@" ;;
+ esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+ test -z "$_G_HAVE_ARITH_OP" \
+ && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+ && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+ eval 'func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=$(( $* ))
+ }'
+else
+ func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=`expr "$@"`
+ }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ # If this shell supports suffix pattern removal, then use it to avoid
+ # forking. Hide the definitions single quotes in case the shell chokes
+ # on unsupported syntax...
+ _b='func_basename_result=${1##*/}'
+ _d='case $1 in
+ */*) func_dirname_result=${1%/*}$2 ;;
+ * ) func_dirname_result=$3 ;;
+ esac'
+
+else
+ # ...otherwise fall back to using sed.
+ _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+ _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"`
+ if test "X$func_dirname_result" = "X$1"; then
+ func_dirname_result=$3
+ else
+ func_append func_dirname_result "$2"
+ fi'
+fi
+
+eval 'func_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+ $debug_cmd
+
+ '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+ '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+ $debug_cmd
+
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ _G_infix=$1; shift
+ _G_indent=$_G_infix
+ _G_prefix="$progname: $_G_infix: "
+ _G_message=$*
+
+ # Strip color escape sequences before counting printable length
+ for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+ do
+ test -n "$_G_tc" && {
+ _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+ _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+ }
+ done
+ _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes
+
+ func_echo_infix_1_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_infix_1_IFS
+ $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+ _G_prefix=$_G_indent
+ done
+ IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ $debug_cmd
+
+ func_error "$*"
+ exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
# Check whether EXPRESSION matches any line of FILENAME, without output.
func_grep ()
{
+ $debug_cmd
+
$GREP "$1" "$2" >/dev/null 2>&1
}
-# func_mkdir_p directory-path
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+ test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=${#1}
+ }'
+else
+ func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+ }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
# Make sure the entire path to DIRECTORY-PATH is available.
func_mkdir_p ()
{
- my_directory_path="$1"
- my_dir_list=
+ $debug_cmd
- if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+ _G_directory_path=$1
+ _G_dir_list=
- # Protect directory names starting with `-'
- case $my_directory_path in
- -*) my_directory_path="./$my_directory_path" ;;
+ if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+ # Protect directory names starting with '-'
+ case $_G_directory_path in
+ -*) _G_directory_path=./$_G_directory_path ;;
esac
# While some portion of DIR does not yet exist...
- while test ! -d "$my_directory_path"; do
+ while test ! -d "$_G_directory_path"; do
# ...make a list in topmost first order. Use a colon delimited
# list incase some portion of path contains whitespace.
- my_dir_list="$my_directory_path:$my_dir_list"
+ _G_dir_list=$_G_directory_path:$_G_dir_list
# If the last portion added has no slash in it, the list is done
- case $my_directory_path in */*) ;; *) break ;; esac
+ case $_G_directory_path in */*) ;; *) break ;; esac
# ...otherwise throw away the child directory and loop
- my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
done
- my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+ _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
- save_mkdir_p_IFS="$IFS"; IFS=':'
- for my_dir in $my_dir_list; do
- IFS="$save_mkdir_p_IFS"
- # mkdir can fail with a `File exist' error if two processes
+ func_mkdir_p_IFS=$IFS; IFS=:
+ for _G_dir in $_G_dir_list; do
+ IFS=$func_mkdir_p_IFS
+ # mkdir can fail with a 'File exist' error if two processes
# try to create one of the directories concurrently. Don't
# stop in that case!
- $MKDIR "$my_dir" 2>/dev/null || :
+ $MKDIR "$_G_dir" 2>/dev/null || :
done
- IFS="$save_mkdir_p_IFS"
+ IFS=$func_mkdir_p_IFS
# Bail out if we (or some other process) failed to create a directory.
- test -d "$my_directory_path" || \
- func_fatal_error "Failed to create \`$1'"
+ test -d "$_G_directory_path" || \
+ func_fatal_error "Failed to create '$1'"
fi
}
-# func_mktempdir [string]
+# func_mktempdir [BASENAME]
+# -------------------------
# Make a temporary directory that won't clash with other running
# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
+# given, BASENAME is the basename for that directory.
func_mktempdir ()
{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
+ $debug_cmd
+
+ _G_template=${TMPDIR-/tmp}/${1-$progname}
- if test "$opt_dry_run" = ":"; then
+ if test : = "$opt_dry_run"; then
# Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
+ _G_tmpdir=$_G_template-$$
else
# If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+ _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
- if test ! -d "$my_tmpdir"; then
+ if test ! -d "$_G_tmpdir"; then
# Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
+ _G_tmpdir=$_G_template-${RANDOM-0}$$
- save_mktempdir_umask=`umask`
+ func_mktempdir_umask=`umask`
umask 0077
- $MKDIR "$my_tmpdir"
- umask $save_mktempdir_umask
+ $MKDIR "$_G_tmpdir"
+ umask $func_mktempdir_umask
fi
# If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || \
- func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ test -d "$_G_tmpdir" || \
+ func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+ fi
+
+ $ECHO "$_G_tmpdir"
+}
+
+
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
+{
+ $debug_cmd
+
+ # These SED scripts presuppose an absolute path with a trailing slash.
+ _G_pathcar='s|^/\([^/]*\).*$|\1|'
+ _G_pathcdr='s|^/[^/]*||'
+ _G_removedotparts=':dotsl
+ s|/\./|/|g
+ t dotsl
+ s|/\.$|/|'
+ _G_collapseslashes='s|/\{1,\}|/|g'
+ _G_finalslash='s|/*$|/|'
+
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test / = "$func_normal_abspath_tpath"; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result"; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+ $debug_cmd
+
+ $opt_quiet || func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+ $debug_cmd
+
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=$func_dirname_result
+ if test -z "$func_relative_path_tlibdir"; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test -n "$func_stripname_result"; then
+ func_append func_relative_path_result "/$func_stripname_result"
+ fi
+
+ # Normalisation. If bindir is libdir, return '.' else relative path.
+ if test -n "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
fi
- $ECHO "$my_tmpdir"
+ test -n "$func_relative_path_result" || func_relative_path_result=.
+
+ :
+}
+
+
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+# i) func_quote_for_eval_result
+# double-quoted, suitable for a subsequent eval
+# ii) func_quote_for_eval_unquoted_result
+# has all characters that are still active within double
+# quotes backslashified.
+func_quote_for_eval ()
+{
+ $debug_cmd
+
+ func_quote_for_eval_unquoted_result=
+ func_quote_for_eval_result=
+ while test 0 -lt $#; do
+ case $1 in
+ *[\\\`\"\$]*)
+ _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+ *)
+ _G_unquoted_arg=$1 ;;
+ esac
+ if test -n "$func_quote_for_eval_unquoted_result"; then
+ func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+ else
+ func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+ fi
+
+ case $_G_unquoted_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and variable expansion
+ # for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ _G_quoted_arg=\"$_G_unquoted_arg\"
+ ;;
+ *)
+ _G_quoted_arg=$_G_unquoted_arg
+ ;;
+ esac
+
+ if test -n "$func_quote_for_eval_result"; then
+ func_append func_quote_for_eval_result " $_G_quoted_arg"
+ else
+ func_append func_quote_for_eval_result "$_G_quoted_arg"
+ fi
+ shift
+ done
+}
+
+
+# func_quote_for_expand ARG
+# -------------------------
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ $debug_cmd
+
+ case $1 in
+ *[\\\`\"]*)
+ _G_arg=`$ECHO "$1" | $SED \
+ -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ _G_arg=$1 ;;
+ esac
+
+ case $_G_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ _G_arg=\"$_G_arg\"
+ ;;
+ esac
+
+ func_quote_for_expand_result=$_G_arg
+}
+
+
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_stripname ()
+ {
+ $debug_cmd
+
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary variable first.
+ func_stripname_result=$3
+ func_stripname_result=${func_stripname_result#"$1"}
+ func_stripname_result=${func_stripname_result%"$2"}
+ }'
+else
+ func_stripname ()
+ {
+ $debug_cmd
+
+ case $2 in
+ .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+ *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+ esac
+ }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ $debug_cmd
+
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ func_quote_for_expand "$_G_cmd"
+ eval "func_notquiet $func_quote_for_expand_result"
+
+ $opt_dry_run || {
+ eval "$_G_cmd"
+ _G_status=$?
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
+ fi
+ }
+}
+
+
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ $debug_cmd
+
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ $opt_quiet || {
+ func_quote_for_expand "$_G_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ $opt_dry_run || {
+ eval "$_G_user_locale
+ $_G_cmd"
+ _G_status=$?
+ eval "$_G_safe_locale"
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
+ fi
+ }
+}
+
+
+# func_tr_sh
+# ----------
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ $debug_cmd
+
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $debug_cmd
+
+ $opt_verbose && func_echo "$*"
+
+ :
+}
+
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+ $debug_cmd
+
+ # CATEGORY must be in the warning_categories list!
+ case " $warning_categories " in
+ *" $1 "*) ;;
+ *) func_internal_error "invalid warning category '$1'" ;;
+ esac
+
+ _G_category=$1
+ shift
+
+ case " $opt_warning_types " in
+ *" $_G_category "*) $warning_func ${1+"$@"} ;;
+ esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+ $debug_cmd
+
+ printf '%s\n%s\n' "$1" "$2" \
+ | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false. Use it like this:
+#
+# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+ $debug_cmd
+
+ test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+# #!/bin/sh
+# . relative/path/to/funclib.sh
+# . relative/path/to/options-parser
+# scriptversion=1.0
+# func_options ${1+"$@"}
+# eval set dummy "$func_options_result"; shift
+# ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'. Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+ --debug enable verbose shell tracing
+ -W, --warnings=CATEGORY
+ report the warnings falling in CATEGORY [all]
+ -v, --verbose verbosely report processing
+ --version print version information and exit
+ -h, --help print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+ 'all' show all warnings
+ 'none' turn off all the warnings
+ 'error' warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code. A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+ $debug_cmd
+
+ func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not accept hook functions." ;;
+ esac
+
+ eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+ $debug_cmd
+
+ eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+ esac
+
+ eval _G_hook_fns=\$$1_hooks; shift
+
+ for _G_hook in $_G_hook_fns; do
+ eval $_G_hook '"$@"'
+
+ # store returned options list back into positional
+ # parameters for next 'cmd' execution.
+ eval _G_hook_result=\$${_G_hook}_result
+ eval set dummy "$_G_hook_result"; shift
+ done
+
+ func_quote_for_eval ${1+"$@"}
+ func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'. Like this:
+#
+# my_options_prep ()
+# {
+# $debug_cmd
+#
+# # Extend the existing usage message.
+# usage_message=$usage_message'
+# -s, --silent don'\''t print informational messages
+# '
+#
+# func_quote_for_eval ${1+"$@"}
+# my_options_prep_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_options_prep my_options_prep
+#
+#
+# my_silent_option ()
+# {
+# $debug_cmd
+#
+# # Note that for efficiency, we parse as many options as we can
+# # recognise in a loop before passing the remainder back to the
+# # caller on the first unrecognised argument we encounter.
+# while test $# -gt 0; do
+# opt=$1; shift
+# case $opt in
+# --silent|-s) opt_silent=: ;;
+# # Separate non-argument short options:
+# -s*) func_split_short_opt "$_G_opt"
+# set dummy "$func_split_short_opt_name" \
+# "-$func_split_short_opt_arg" ${1+"$@"}
+# shift
+# ;;
+# *) set dummy "$_G_opt" "$*"; shift; break ;;
+# esac
+# done
+#
+# func_quote_for_eval ${1+"$@"}
+# my_silent_option_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_parse_options my_silent_option
+#
+#
+# my_option_validation ()
+# {
+# $debug_cmd
+#
+# $opt_silent && $opt_verbose && func_fatal_help "\
+# '--silent' and '--verbose' options are mutually exclusive."
+#
+# func_quote_for_eval ${1+"$@"}
+# my_option_validation_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse. It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+ $debug_cmd
+
+ func_options_prep ${1+"$@"}
+ eval func_parse_options \
+ ${func_options_prep_result+"$func_options_prep_result"}
+ eval func_validate_options \
+ ${func_parse_options_result+"$func_parse_options_result"}
+
+ eval func_run_hooks func_options \
+ ${func_validate_options_result+"$func_validate_options_result"}
+
+ # save modified positional parameters for caller
+ func_options_result=$func_run_hooks_result
}
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters. If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
{
- case $1 in
- *[\\\`\"\$]*)
- func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
- *)
- func_quote_for_eval_unquoted_result="$1" ;;
- esac
+ $debug_cmd
- case $func_quote_for_eval_unquoted_result in
- # Double-quote args containing shell metacharacters to delay
- # word splitting, command substitution and and variable
- # expansion for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
- ;;
- *)
- func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
- esac
+ # Option defaults:
+ opt_verbose=false
+ opt_warning_types=
+
+ func_run_hooks func_options_prep ${1+"$@"}
+
+ # save modified positional parameters for caller
+ func_options_prep_result=$func_run_hooks_result
}
-# func_quote_for_expand arg
-# Aesthetically quote ARG to be evaled later; same as above,
-# but do not quote variable references.
-func_quote_for_expand ()
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
{
- case $1 in
- *[\\\`\"]*)
- my_arg=`$ECHO "$1" | $SED \
- -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
- *)
- my_arg="$1" ;;
- esac
+ $debug_cmd
- case $my_arg in
- # Double-quote args containing shell metacharacters to delay
- # word splitting and command substitution for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- my_arg="\"$my_arg\""
- ;;
- esac
+ func_parse_options_result=
- func_quote_for_expand_result="$my_arg"
-}
+ # this just eases exit handling
+ while test $# -gt 0; do
+ # Defer to hook functions for initial option parsing, so they
+ # get priority in the event of reusing an option name.
+ func_run_hooks func_parse_options ${1+"$@"}
+ # Adjust func_parse_options positional parameters to match
+ eval set dummy "$func_run_hooks_result"; shift
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.
-func_show_eval ()
-{
- my_cmd="$1"
- my_fail_exp="${2-:}"
+ # Break out of the loop if we already parsed every option.
+ test $# -gt 0 || break
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --debug|-x) debug_cmd='set -x'
+ func_echo "enabling shell trace mode"
+ $debug_cmd
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ set dummy --warnings none ${1+"$@"}
+ shift
+ ;;
- if ${opt_dry_run-false}; then :; else
- eval "$my_cmd"
- my_status=$?
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
- fi
+ --warnings|--warning|-W)
+ test $# = 0 && func_missing_arg $_G_opt && break
+ case " $warning_categories $1" in
+ *" $1 "*)
+ # trailing space prevents matching last $1 above
+ func_append_uniq opt_warning_types " $1"
+ ;;
+ *all)
+ opt_warning_types=$warning_categories
+ ;;
+ *none)
+ opt_warning_types=none
+ warning_func=:
+ ;;
+ *error)
+ opt_warning_types=$warning_categories
+ warning_func=func_fatal_error
+ ;;
+ *)
+ func_fatal_error \
+ "unsupported warning category: '$1'"
+ ;;
+ esac
+ shift
+ ;;
+
+ --verbose|-v) opt_verbose=: ;;
+ --version) func_version ;;
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+
+ # Separate optargs to long options (plugins may need this):
+ --*=*) func_split_equals "$_G_opt"
+ set dummy "$func_split_equals_lhs" \
+ "$func_split_equals_rhs" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate optargs to short options:
+ -W*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-v*|-x*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognised option: '$_G_opt'" ;;
+ *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ func_parse_options_result=$func_quote_for_eval_result
}
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it. Use the saved locale for evaluation.
-func_show_eval_locale ()
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
{
- my_cmd="$1"
- my_fail_exp="${2-:}"
+ $debug_cmd
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
+ # Display all warnings if -W was not given.
+ test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
- if ${opt_dry_run-false}; then :; else
- eval "$lt_user_locale
- $my_cmd"
- my_status=$?
- eval "$lt_safe_locale"
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
- fi
-}
+ func_run_hooks func_validate_options ${1+"$@"}
-# func_tr_sh
-# Turn $1 into a string suitable for a shell variable name.
-# Result is stored in $func_tr_sh_result. All characters
-# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-# if $1 begins with a digit, a '_' is prepended as well.
-func_tr_sh ()
-{
- case $1 in
- [0-9]* | *[!a-zA-Z0-9_]*)
- func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
- ;;
- * )
- func_tr_sh_result=$1
- ;;
- esac
+ # Bail if the options were screwed!
+ $exit_cmd $EXIT_FAILURE
+
+ # save modified positional parameters for caller
+ func_validate_options_result=$func_run_hooks_result
}
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
-{
- $opt_debug
- $SED -n '/(C)/!b go
- :more
- /\./!{
- N
- s/\n# / /
- b more
- }
- :go
- /^# '$PROGRAM' (GNU /,/# warranty; / {
- s/^# //
- s/^# *$//
- s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
- p
- }' < "$progpath"
- exit $?
-}
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
{
- $opt_debug
+ $debug_cmd
- $SED -n '/^# Usage:/,/^# *.*--help/ {
- s/^# //
- s/^# *$//
- s/\$progname/'$progname'/
- p
- }' < "$progpath"
- echo
- $ECHO "run \`$progname --help | more' for full usage"
- exit $?
+ eval \$ECHO \""Usage: $usage"\"
+ eval \$ECHO \""$fatal_help"\"
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
}
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
func_help ()
{
- $opt_debug
-
- $SED -n '/^# Usage:/,/# Report bugs to/ {
- :print
- s/^# //
- s/^# *$//
- s*\$progname*'$progname'*
- s*\$host*'"$host"'*
- s*\$SHELL*'"$SHELL"'*
- s*\$LTCC*'"$LTCC"'*
- s*\$LTCFLAGS*'"$LTCFLAGS"'*
- s*\$LD*'"$LD"'*
- s/\$with_gnu_ld/'"$with_gnu_ld"'/
- s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
- s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
- p
- d
- }
- /^# .* home page:/b print
- /^# General help using/b print
- ' < "$progpath"
- ret=$?
- if test -z "$1"; then
- exit $ret
- fi
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "$long_help_message"
+ exit 0
}
-# func_missing_arg argname
+
+# func_missing_arg ARGNAME
+# ------------------------
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
- $opt_debug
+ $debug_cmd
- func_error "missing argument for $1."
+ func_error "Missing argument for '$1'."
exit_cmd=exit
}
-# func_split_short_opt shortopt
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=${1%%=*}
+ func_split_equals_rhs=${1#*=}
+ test "x$func_split_equals_lhs" = "x$1" \
+ && func_split_equals_rhs=
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+ func_split_equals_rhs=
+ test "x$func_split_equals_lhs" = "x$1" \
+ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+ }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
# Set func_split_short_opt_name and func_split_short_opt_arg shell
# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+ func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+ }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
{
- my_sed_short_opt='1s/^\(..\).*$/\1/;q'
- my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+ $debug_cmd
- func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
- func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
+ func_usage_message
+ $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+ exit 0
+}
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
{
- my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
- my_sed_long_arg='1s/^--[^=]*=//'
+ $debug_cmd
- func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
- func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
+ eval \$ECHO \""Usage: $usage"\"
+ echo
+ $SED -n 's|^# ||
+ /^Written by/{
+ x;p;x
+ }
+ h
+ /^Written by/q' < "$progpath"
+ echo
+ eval \$ECHO \""$usage_message"\"
+}
-exit_cmd=:
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $debug_cmd
+ printf '%s\n' "$progname $scriptversion"
+ $SED -n '
+ /(C)/!b go
+ :more
+ /\./!{
+ N
+ s|\n# | |
+ b more
+ }
+ :go
+ /^# Written by /,/# warranty; / {
+ s|^# ||
+ s|^# *$||
+ s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+ p
+ }
+ /^# Written by / {
+ s|^# ||
+ p
+ }
+ /^warranty; /q' < "$progpath"
+ exit $?
+}
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
{
- eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
+ $debug_cmd
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
- func_quote_for_eval "${2}"
- eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
+ _G_message=$*
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
-# func_arith arithmetic-term...
-func_arith ()
+
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
{
- func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
+ $debug_cmd
+ $warning_func ${1+"$@"}
+}
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+ --config show all configuration variables
+ --debug enable verbose shell tracing
+ -n, --dry-run display commands without modifying any files
+ --features display basic configuration information and exit
+ --mode=MODE use operation mode MODE
+ --no-warnings equivalent to '-Wnone'
+ --preserve-dup-deps don't remove duplicate dependency libraries
+ --quiet, --silent don't print informational messages
+ --tag=TAG use configuration variables from tag TAG
+ -v, --verbose print more informational messages than default
+ --version print version information
+ -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all]
+ -h, --help, --help-all print short, long, or detailed help message
+"
-# func_lo2o object
-func_lo2o ()
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
{
- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+ clean remove files from the build directory
+ compile compile a source file into a libtool object
+ execute automatically set library path, then run a program
+ finish complete the installation of libtool libraries
+ install install libraries or executables
+ link create a library or an executable
+ uninstall remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE. When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+ host-triplet: $host
+ shell: $SHELL
+ compiler: $LTCC
+ compiler flags: $LTCFLAGS
+ linker: $LD (gnu? $with_gnu_ld)
+ version: $progname (GNU libtool) 2.4.6
+ automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+ autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+ exit 0
+}
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_lo2o ()
+ {
+ case $1 in
+ *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+ * ) func_lo2o_result=$1 ;;
+ esac
+ }'
+
+ # func_xform LIBOBJ-OR-SOURCE
+ # ---------------------------
+ # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+ # suffix to a '.lo' libtool-object suffix.
+ eval 'func_xform ()
+ {
+ func_xform_result=${1%.*}.lo
+ }'
+else
+ # ...otherwise fall back to using sed.
+ func_lo2o ()
+ {
+ func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+ }
+
+ func_xform ()
+ {
+ func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+ }
+fi
-# func_fatal_configuration arg...
+# func_fatal_configuration ARG...
+# -------------------------------
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
func_fatal_configuration ()
{
- func_error ${1+"$@"}
- func_error "See the $PACKAGE documentation for more information."
- func_fatal_error "Fatal configuration error."
+ func__fatal_error ${1+"$@"} \
+ "See the $PACKAGE documentation for more information." \
+ "Fatal configuration error."
}
# func_config
+# -----------
# Display the configuration for all the tags in this script.
func_config ()
{
exit $?
}
+
# func_features
+# -------------
# Display the features supported by this script.
func_features ()
{
echo "host: $host"
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
echo "enable shared libraries"
else
echo "disable shared libraries"
fi
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
echo "enable static libraries"
else
echo "disable static libraries"
exit $?
}
-# func_enable_tag tagname
+
+# func_enable_tag TAGNAME
+# -----------------------
# Verify that TAGNAME is valid, and either flag an error and exit, or
# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
# variable here.
func_enable_tag ()
{
- # Global variable:
- tagname="$1"
+ # Global variable:
+ tagname=$1
- re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
- re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
- sed_extractcf="/$re_begincf/,/$re_endcf/p"
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf=/$re_begincf/,/$re_endcf/p
- # Validate tagname.
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- func_fatal_error "invalid tag name: $tagname"
- ;;
- esac
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
- # Don't test for the "default" C tag, as we know it's
- # there but not specially marked.
- case $tagname in
- CC) ;;
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
*)
- if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
- taglist="$taglist $tagname"
-
- # Evaluate the configuration. Be careful to quote the path
- # and the sed script, to avoid splitting on whitespace, but
- # also don't use non-portable quotes within backquotes within
- # quotes we have to do it in 2 steps:
- extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
- eval "$extractedcf"
- else
- func_error "ignoring unknown tag $tagname"
- fi
- ;;
- esac
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
}
+
# func_check_version_match
+# ------------------------
# Ensure that we are using m4 macros, and libtool script from the same
# release of libtool.
func_check_version_match ()
{
- if test "$package_revision" != "$macro_revision"; then
- if test "$VERSION" != "$macro_version"; then
- if test -z "$macro_version"; then
- cat >&2 <<_LT_EOF
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from an older release.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
- else
- cat >&2 <<_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
- fi
- else
- cat >&2 <<_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
$progname: of $PACKAGE $VERSION and run autoconf again.
_LT_EOF
- fi
+ fi
- exit $EXIT_MISMATCH
- fi
+ exit $EXIT_MISMATCH
+ fi
}
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
- shift; set dummy --mode clean ${1+"$@"}; shift
- ;;
-compile|compil|compi|comp|com|co|c)
- shift; set dummy --mode compile ${1+"$@"}; shift
- ;;
-execute|execut|execu|exec|exe|ex|e)
- shift; set dummy --mode execute ${1+"$@"}; shift
- ;;
-finish|finis|fini|fin|fi|f)
- shift; set dummy --mode finish ${1+"$@"}; shift
- ;;
-install|instal|insta|inst|ins|in|i)
- shift; set dummy --mode install ${1+"$@"}; shift
- ;;
-link|lin|li|l)
- shift; set dummy --mode link ${1+"$@"}; shift
- ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
- shift; set dummy --mode uninstall ${1+"$@"}; shift
- ;;
-esac
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+ $debug_mode
+ # Option defaults:
+ opt_config=false
+ opt_dlopen=
+ opt_dry_run=false
+ opt_help=false
+ opt_mode=
+ opt_preserve_dup_deps=false
+ opt_quiet=false
+ nonopt=
+ preserve_args=
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+ esac
+
+ # Pass back the list of options.
+ func_quote_for_eval ${1+"$@"}
+ libtool_options_prep_result=$func_quote_for_eval_result
+}
+func_add_hook func_options_prep libtool_options_prep
-# Parse options once, thoroughly. This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
{
- # this just eases exit handling
- while test $# -gt 0; do
- opt="$1"
- shift
- case $opt in
- --debug|-x) opt_debug='set -x'
- func_echo "enabling shell trace mode"
- $opt_debug
- ;;
- --dry-run|--dryrun|-n)
- opt_dry_run=:
- ;;
- --config)
- opt_config=:
-func_config
- ;;
- --dlopen|-dlopen)
- optarg="$1"
- opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
- shift
- ;;
- --preserve-dup-deps)
- opt_preserve_dup_deps=:
- ;;
- --features)
- opt_features=:
-func_features
- ;;
- --finish)
- opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
- ;;
- --help)
- opt_help=:
- ;;
- --help-all)
- opt_help_all=:
-opt_help=': help-all'
- ;;
- --mode)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_mode="$optarg"
-case $optarg in
- # Valid mode arguments:
- clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
- # Catch anything else as an error
- *) func_error "invalid argument for $opt"
- exit_cmd=exit
- break
- ;;
-esac
- shift
- ;;
- --no-silent|--no-quiet)
- opt_silent=false
-func_append preserve_args " $opt"
- ;;
- --no-warning|--no-warn)
- opt_warning=false
-func_append preserve_args " $opt"
- ;;
- --no-verbose)
- opt_verbose=false
-func_append preserve_args " $opt"
- ;;
- --silent|--quiet)
- opt_silent=:
-func_append preserve_args " $opt"
- opt_verbose=false
- ;;
- --verbose|-v)
- opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
- ;;
- --tag)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
- shift
- ;;
-
- -\?|-h) func_usage ;;
- --help) func_help ;;
- --version) func_version ;;
-
- # Separate optargs to long options:
- --*=*)
- func_split_long_opt "$opt"
- set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
- shift
- ;;
-
- # Separate non-argument short options:
- -\?*|-h*|-n*|-v*)
- func_split_short_opt "$opt"
- set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
- shift
- ;;
-
- --) break ;;
- -*) func_fatal_help "unrecognized option \`$opt'" ;;
- *) set dummy "$opt" ${1+"$@"}; shift; break ;;
- esac
- done
+ $debug_cmd
- # Validate options:
+ # Perform our own loop to consume as many options as possible in
+ # each iteration.
+ while test $# -gt 0; do
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+
+ --config) func_config ;;
+
+ --dlopen|-dlopen)
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+ shift
+ ;;
+
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=: ;;
+
+ --features) func_features ;;
+
+ --finish) set dummy --mode finish ${1+"$@"}; shift ;;
+
+ --help) opt_help=: ;;
+
+ --help-all) opt_help=': help-all' ;;
+
+ --mode) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_mode=$1
+ case $1 in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $_G_opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+ shift
+ ;;
+
+ --no-silent|--no-quiet)
+ opt_quiet=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ opt_warning=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-verbose)
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --silent|--quiet)
+ opt_quiet=:
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --tag) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_tag=$1
+ func_append preserve_args " $_G_opt $1"
+ func_enable_tag "$1"
+ shift
+ ;;
+
+ --verbose|-v) opt_quiet=false
+ opt_verbose=:
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ # An option not handled by this hook function:
+ *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
- # save first non-option argument
- if test "$#" -gt 0; then
- nonopt="$opt"
- shift
- fi
- # preserve --debug
- test "$opt_debug" = : || func_append preserve_args " --debug"
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
- case $host in
- *cygwin* | *mingw* | *pw32* | *cegcc*)
- # don't eliminate duplications in $postdeps and $predeps
- opt_duplicate_compiler_generated_deps=:
- ;;
- *)
- opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
- ;;
- esac
- $opt_help || {
- # Sanity checks first:
- func_check_version_match
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- func_fatal_configuration "not configured to build any kind of library"
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+ # save first non-option argument
+ if test 0 -lt $#; then
+ nonopt=$1
+ shift
fi
- # Darwin sucks
- eval std_shrext=\"$shrext_cmds\"
+ # preserve --debug
+ test : = "$debug_cmd" || func_append preserve_args " --debug"
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
- func_error "unrecognized option \`-dlopen'"
- $ECHO "$help" 1>&2
- exit $EXIT_FAILURE
- fi
+ case $host in
+ # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+ # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+ *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$progname --help --mode=$opt_mode' for more information."
- }
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ test yes != "$build_libtool_libs" \
+ && test yes != "$build_old_libs" \
+ && func_fatal_configuration "not configured to build any kind of library"
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+ func_error "unrecognized option '-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ # Change the help message to a mode-specific one.
+ generic_help=$help
+ help="Try '$progname --help --mode=$opt_mode' for more information."
+ }
- # Bail if the options were screwed
- $exit_cmd $EXIT_FAILURE
+ # Pass back the unparsed argument list
+ func_quote_for_eval ${1+"$@"}
+ libtool_validate_options_result=$func_quote_for_eval_result
}
+func_add_hook func_validate_options libtool_validate_options
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
## ----------- ##
## Main. ##
## ----------- ##
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+ $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_lalib_p ()
{
test -f "$1" &&
- $SED -e 4q "$1" 2>/dev/null \
- | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+ $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function implements the same check as func_lalib_p without
# resorting to external programs. To this end, it redirects stdin and
# closes it afterwards, without saving the original file descriptor.
# As a safety measure, use it only where a negative result would be
-# fatal anyway. Works if `file' does not exist.
+# fatal anyway. Works if 'file' does not exist.
func_lalib_unsafe_p ()
{
lalib_p=no
for lalib_p_l in 1 2 3 4
do
read lalib_p_line
- case "$lalib_p_line" in
+ case $lalib_p_line in
\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
esac
done
exec 0<&5 5<&-
fi
- test "$lalib_p" = yes
+ test yes = "$lalib_p"
}
# func_ltwrapper_script_p file
# determined imposters.
func_ltwrapper_script_p ()
{
- func_lalib_p "$1"
+ test -f "$1" &&
+ $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_ltwrapper_executable_p file
{
func_dirname_and_basename "$1" "" "."
func_stripname '' '.exe' "$func_basename_result"
- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
}
# func_ltwrapper_p file
# FAIL_CMD may read-access the current command in variable CMD!
func_execute_cmds ()
{
- $opt_debug
+ $debug_cmd
+
save_ifs=$IFS; IFS='~'
for cmd in $1; do
- IFS=$save_ifs
+ IFS=$sp$nl
eval cmd=\"$cmd\"
+ IFS=$save_ifs
func_show_eval "$cmd" "${2-:}"
done
IFS=$save_ifs
# Note that it is not necessary on cygwin/mingw to append a dot to
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)! Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
+# 'FILE.' does not work on cygwin managed mounts.
func_source ()
{
- $opt_debug
+ $debug_cmd
+
case $1 in
*/* | *\\*) . "$1" ;;
*) . "./$1" ;;
# store the result into func_replace_sysroot_result.
func_replace_sysroot ()
{
- case "$lt_sysroot:$1" in
+ case $lt_sysroot:$1 in
?*:"$lt_sysroot"*)
func_stripname "$lt_sysroot" '' "$1"
- func_replace_sysroot_result="=$func_stripname_result"
+ func_replace_sysroot_result='='$func_stripname_result
;;
*)
# Including no sysroot.
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
- $opt_debug
+ $debug_cmd
+
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
for z in $available_tags; do
if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
# Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
# line option must be used.
if test -z "$tagname"; then
func_echo "unable to infer tagged configuration"
- func_fatal_error "specify a tag with \`--tag'"
+ func_fatal_error "specify a tag with '--tag'"
# else
# func_verbose "using $tagname tagged configuration"
fi
# but don't create it if we're doing a dry run.
func_write_libtool_object ()
{
- write_libobj=${1}
- if test "$build_libtool_libs" = yes; then
- write_lobj=\'${2}\'
+ write_libobj=$1
+ if test yes = "$build_libtool_libs"; then
+ write_lobj=\'$2\'
else
write_lobj=none
fi
- if test "$build_old_libs" = yes; then
- write_oldobj=\'${3}\'
+ if test yes = "$build_old_libs"; then
+ write_oldobj=\'$3\'
else
write_oldobj=none
fi
$opt_dry_run || {
cat >${write_libobj}T <<EOF
# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
non_pic_object=$write_oldobj
EOF
- $MV "${write_libobj}T" "${write_libobj}"
+ $MV "${write_libobj}T" "$write_libobj"
}
}
# be empty on error (or when ARG is empty)
func_convert_core_file_wine_to_w32 ()
{
- $opt_debug
- func_convert_core_file_wine_to_w32_result="$1"
+ $debug_cmd
+
+ func_convert_core_file_wine_to_w32_result=$1
if test -n "$1"; then
# Unfortunately, winepath does not exit with a non-zero error code, so we
# are forced to check the contents of stdout. On the other hand, if the
# *an error message* to stdout. So we must check for both error code of
# zero AND non-empty stdout, which explains the odd construction:
func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
- if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
- $SED -e "$lt_sed_naive_backslashify"`
+ $SED -e "$sed_naive_backslashify"`
else
func_convert_core_file_wine_to_w32_result=
fi
# are convertible, then the result may be empty.
func_convert_core_path_wine_to_w32 ()
{
- $opt_debug
+ $debug_cmd
+
# unfortunately, winepath doesn't convert paths, only file names
- func_convert_core_path_wine_to_w32_result=""
+ func_convert_core_path_wine_to_w32_result=
if test -n "$1"; then
oldIFS=$IFS
IFS=:
for func_convert_core_path_wine_to_w32_f in $1; do
IFS=$oldIFS
func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
- if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -n "$func_convert_core_file_wine_to_w32_result"; then
if test -z "$func_convert_core_path_wine_to_w32_result"; then
- func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
else
func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
fi
# environment variable; do not put it in $PATH.
func_cygpath ()
{
- $opt_debug
+ $debug_cmd
+
if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
if test "$?" -ne 0; then
fi
else
func_cygpath_result=
- func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
fi
}
#end: func_cygpath
# result in func_convert_core_msys_to_w32_result.
func_convert_core_msys_to_w32 ()
{
- $opt_debug
+ $debug_cmd
+
# awkward: cmd appends spaces to result
func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+ $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
}
#end: func_convert_core_msys_to_w32
# func_to_host_file_result to ARG1).
func_convert_file_check ()
{
- $opt_debug
- if test -z "$2" && test -n "$1" ; then
+ $debug_cmd
+
+ if test -z "$2" && test -n "$1"; then
func_error "Could not determine host file name corresponding to"
- func_error " \`$1'"
+ func_error " '$1'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback:
- func_to_host_file_result="$1"
+ func_to_host_file_result=$1
fi
}
# end func_convert_file_check
# func_to_host_file_result to a simplistic fallback value (see below).
func_convert_path_check ()
{
- $opt_debug
+ $debug_cmd
+
if test -z "$4" && test -n "$3"; then
func_error "Could not determine the host path corresponding to"
- func_error " \`$3'"
+ func_error " '$3'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback. This is a deliberately simplistic "conversion" and
# should not be "improved". See libtool.info.
func_to_host_path_result=`echo "$3" |
$SED -e "$lt_replace_pathsep_chars"`
else
- func_to_host_path_result="$3"
+ func_to_host_path_result=$3
fi
fi
}
# and appending REPL if ORIG matches BACKPAT.
func_convert_path_front_back_pathsep ()
{
- $opt_debug
+ $debug_cmd
+
case $4 in
- $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ $1 ) func_to_host_path_result=$3$func_to_host_path_result
;;
esac
case $4 in
##################################################
# $build to $host FILE NAME CONVERSION FUNCTIONS #
##################################################
-# invoked via `$to_host_file_cmd ARG'
+# invoked via '$to_host_file_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# Result will be available in $func_to_host_file_result.
# in func_to_host_file_result.
func_to_host_file ()
{
- $opt_debug
+ $debug_cmd
+
$to_host_file_cmd "$1"
}
# end func_to_host_file
# in (the comma separated) LAZY, no conversion takes place.
func_to_tool_file ()
{
- $opt_debug
+ $debug_cmd
+
case ,$2, in
*,"$to_tool_file_cmd",*)
func_to_tool_file_result=$1
# Copy ARG to func_to_host_file_result.
func_convert_file_noop ()
{
- func_to_host_file_result="$1"
+ func_to_host_file_result=$1
}
# end func_convert_file_noop
# func_to_host_file_result.
func_convert_file_msys_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result=$func_convert_core_msys_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# func_to_host_file_result.
func_convert_file_cygwin_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
# because $build is cygwin, we call "the" cygpath in $PATH; no need to use
# LT_CYGPATH in this case.
# and a working winepath. Returns result in func_to_host_file_result.
func_convert_file_nix_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_file_wine_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# Returns result in func_to_host_file_result.
func_convert_file_msys_to_cygwin ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
func_cygpath -u "$func_convert_core_msys_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
+ func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
# in func_to_host_file_result.
func_convert_file_nix_to_cygwin ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
# convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
func_convert_core_file_wine_to_w32 "$1"
func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
+ func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
#############################################
# $build to $host PATH CONVERSION FUNCTIONS #
#############################################
-# invoked via `$to_host_path_cmd ARG'
+# invoked via '$to_host_path_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# The result will be available in $func_to_host_path_result.
to_host_path_cmd=
func_init_to_host_path_cmd ()
{
- $opt_debug
+ $debug_cmd
+
if test -z "$to_host_path_cmd"; then
func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
- to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ to_host_path_cmd=func_convert_path_$func_stripname_result
fi
}
# in func_to_host_path_result.
func_to_host_path ()
{
- $opt_debug
+ $debug_cmd
+
func_init_to_host_path_cmd
$to_host_path_cmd "$1"
}
# Copy ARG to func_to_host_path_result.
func_convert_path_noop ()
{
- func_to_host_path_result="$1"
+ func_to_host_path_result=$1
}
# end func_convert_path_noop
# func_to_host_path_result.
func_convert_path_msys_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from ARG. MSYS
# behavior is inconsistent here; cygpath turns them into '.;' and ';.';
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result=$func_convert_core_msys_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
# func_to_host_file_result.
func_convert_path_cygwin_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
# a working winepath. Returns result in func_to_host_file_result.
func_convert_path_nix_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
# Returns result in func_to_host_file_result.
func_convert_path_msys_to_cygwin ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
+ func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
# func_to_host_file_result.
func_convert_path_nix_to_cygwin ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from
# ARG. msys behavior is inconsistent here, cygpath turns them
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
+ func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
# end func_convert_path_nix_to_cygwin
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+ $debug_cmd
+
+ func_dll_def_p_tmp=`$SED -n \
+ -e 's/^[ ]*//' \
+ -e '/^\(;.*\)*$/d' \
+ -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \
+ -e q \
+ "$1"`
+ test DEF = "$func_dll_def_p_tmp"
+}
+
+
# func_mode_compile arg...
func_mode_compile ()
{
- $opt_debug
+ $debug_cmd
+
# Get the compilation command and the source file.
base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ srcfile=$nonopt # always keep a non-empty value in "srcfile"
suppress_opt=yes
suppress_output=
arg_mode=normal
case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
- lastarg="$arg"
+ lastarg=$arg
arg_mode=normal
;;
target )
- libobj="$arg"
+ libobj=$arg
arg_mode=normal
continue
;;
case $arg in
-o)
test -n "$libobj" && \
- func_fatal_error "you cannot specify \`-o' more than once"
+ func_fatal_error "you cannot specify '-o' more than once"
arg_mode=target
continue
;;
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
lastarg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for arg in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_append_quoted lastarg "$arg"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$lastarg"
lastarg=$func_stripname_result
# Accept the current argument as the source file.
# The previous "srcfile" becomes the current argument.
#
- lastarg="$srcfile"
- srcfile="$arg"
+ lastarg=$srcfile
+ srcfile=$arg
;;
esac # case $arg
;;
func_fatal_error "you must specify an argument for -Xcompile"
;;
target)
- func_fatal_error "you must specify a target with \`-o'"
+ func_fatal_error "you must specify a target with '-o'"
;;
*)
# Get the name of the library object.
test -z "$libobj" && {
func_basename "$srcfile"
- libobj="$func_basename_result"
+ libobj=$func_basename_result
}
;;
esac
case $libobj in
*.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
*)
- func_fatal_error "cannot determine name of library object from \`$libobj'"
+ func_fatal_error "cannot determine name of library object from '$libobj'"
;;
esac
for arg in $later; do
case $arg in
-shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
+ test yes = "$build_libtool_libs" \
+ || func_fatal_configuration "cannot build a shared library"
build_old_libs=no
continue
;;
func_quote_for_eval "$libobj"
test "X$libobj" != "X$func_quote_for_eval_result" \
&& $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ && func_warning "libobj name '$libobj' may not contain shell special characters."
func_dirname_and_basename "$obj" "/" ""
- objname="$func_basename_result"
- xdir="$func_dirname_result"
- lobj=${xdir}$objdir/$objname
+ objname=$func_basename_result
+ xdir=$func_dirname_result
+ lobj=$xdir$objdir/$objname
test -z "$base_compile" && \
func_fatal_help "you must specify a compilation command"
# Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
removelist="$obj $lobj $libobj ${libobj}T"
else
removelist="$lobj $libobj ${libobj}T"
pic_mode=default
;;
esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
# non-PIC code in shared libraries is not supported
pic_mode=default
fi
# Calculate the filename of the output object if compiler does
# not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
+ if test no = "$compiler_c_o"; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+ lockfile=$output_obj.lock
else
output_obj=
need_locks=no
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
+ if test yes = "$need_locks"; then
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
sleep 2
done
- elif test "$need_locks" = warn; then
+ elif test warn = "$need_locks"; then
if test -f "$lockfile"; then
$ECHO "\
*** ERROR, $lockfile exists and contains:
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
qsrcfile=$func_quote_for_eval_result
# Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
# Without this assignment, base_compile gets emptied.
fbsd_hideous_sh_bug=$base_compile
- if test "$pic_mode" != no; then
+ if test no != "$pic_mode"; then
command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
func_show_eval_locale "$command" \
'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
- if test "$need_locks" = warn &&
+ if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
fi
# Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
+ if test yes = "$suppress_opt"; then
suppress_output=' >/dev/null 2>&1'
fi
fi
# Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
+ if test yes = "$build_old_libs"; then
+ if test yes != "$pic_mode"; then
# Don't build PIC code
command="$base_compile $qsrcfile$pie_flag"
else
command="$base_compile $qsrcfile $pic_flag"
fi
- if test "$compiler_c_o" = yes; then
+ if test yes = "$compiler_c_o"; then
func_append command " -o $obj"
fi
func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
- if test "$need_locks" = warn &&
+ if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
# Unlock the critical section if it was locked
- if test "$need_locks" != no; then
+ if test no != "$need_locks"; then
removelist=$lockfile
$RM "$lockfile"
fi
}
$opt_help || {
- test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+ test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
}
func_mode_help ()
Remove files from the build directory.
RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, object or program, all the files associated
-no-suppress do not suppress compiler output for multiple passes
-prefer-pic try to build PIC objects only
-prefer-non-pic try to build non-PIC objects only
- -shared do not build a \`.o' file suitable for static linking
- -static only build a \`.o' file suitable for static linking
+ -shared do not build a '.o' file suitable for static linking
+ -static only build a '.o' file suitable for static linking
-Wc,FLAG pass FLAG directly to the compiler
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
from the given SOURCEFILE.
The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
;;
execute)
-dlopen FILE add the directory containing FILE to the library path
-This mode sets the library path environment variable according to \`-dlopen'
+This mode sets the library path environment variable according to '-dlopen'
flags.
If any of the ARGS are libtool executable wrappers, then they are translated
Each LIBDIR is a directory that contains libtool libraries.
The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
+the '--dry-run' option if you just want to see what would be executed."
;;
install)
Install executables or libraries.
INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
+either the 'install' or 'cp' program.
The following components of INSTALL-COMMAND are treated specially:
-avoid-version do not add a version suffix if possible
-bindir BINDIR specify path to binaries directory (for systems where
libraries must be found in the PATH setting at runtime)
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
-no-install link a not-installable executable
-no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
+ -objectlist FILE use a list of object files found in FILE to specify objects
+ -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes)
-precious-files-regex REGEX
don't remove output files matching REGEX
-release RELEASE specify package release information
-Xlinker FLAG pass linker-specific FLAG directly to the linker
-XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
-All other options (arguments beginning with \`-') are ignored.
+All other options (arguments beginning with '-') are ignored.
-Every other argument is treated as a filename. Files ending in \`.la' are
+Every other argument is treated as a filename. Files ending in '.la' are
treated as uninstalled libtool libraries, other files are standard or library
object files.
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
required, except when creating a convenience library.
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
is created, otherwise an executable program is created."
;;
Remove libraries from an installation directory.
RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, all the files associated with it are deleted.
;;
*)
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode '$opt_mode'"
;;
esac
echo
- $ECHO "Try \`$progname --help' for more information about other modes."
+ $ECHO "Try '$progname --help' for more information about other modes."
}
# Now that we've collected a possible --mode arg, show help if necessary
if $opt_help; then
- if test "$opt_help" = :; then
+ if test : = "$opt_help"; then
func_mode_help
else
{
for opt_mode in compile link execute install finish uninstall clean; do
func_mode_help
done
- } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ } | $SED -n '1p; 2,$s/^Usage:/ or: /p'
{
func_help noexit
for opt_mode in compile link execute install finish uninstall clean; do
func_mode_help
done
} |
- sed '1d
+ $SED '1d
/^When reporting/,/^Report/{
H
d
# func_mode_execute arg...
func_mode_execute ()
{
- $opt_debug
+ $debug_cmd
+
# The first argument is the command name.
- cmd="$nonopt"
+ cmd=$nonopt
test -z "$cmd" && \
func_fatal_help "you must specify a COMMAND"
# Handle -dlopen flags immediately.
for file in $opt_dlopen; do
test -f "$file" \
- || func_fatal_help "\`$file' is not a file"
+ || func_fatal_help "'$file' is not a file"
dir=
case $file in
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$lib' is not a valid libtool archive"
+ || func_fatal_help "'$lib' is not a valid libtool archive"
# Read the libtool library.
dlname=
if test -z "$dlname"; then
# Warn if it was a shared library.
test -n "$library_names" && \
- func_warning "\`$file' was not linked with \`-export-dynamic'"
+ func_warning "'$file' was not linked with '-export-dynamic'"
continue
fi
func_dirname "$file" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
if test -f "$dir/$objdir/$dlname"; then
func_append dir "/$objdir"
else
if test ! -f "$dir/$dlname"; then
- func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
fi
fi
;;
*.lo)
# Just add the directory containing the .lo file.
func_dirname "$file" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
;;
*)
- func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
continue
;;
esac
# Get the absolute pathname.
absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
+ test -n "$absdir" && dir=$absdir
# Now add the directory to shlibpath_var.
if eval "test -z \"\$$shlibpath_var\""; then
# This variable tells wrapper scripts just to set shlibpath_var
# rather than running their programs.
- libtool_execute_magic="$magic"
+ libtool_execute_magic=$magic
# Check if any of the arguments is a wrapper script.
args=
if func_ltwrapper_script_p "$file"; then
func_source "$file"
# Transform arg to wrapped name.
- file="$progdir/$program"
+ file=$progdir/$program
elif func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
func_source "$func_ltwrapper_scriptname_result"
# Transform arg to wrapped name.
- file="$progdir/$program"
+ file=$progdir/$program
fi
;;
esac
func_append_quoted args "$file"
done
- if test "X$opt_dry_run" = Xfalse; then
+ if $opt_dry_run; then
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ else
if test -n "$shlibpath_var"; then
# Export the shlibpath_var.
eval "export $shlibpath_var"
done
# Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
- echo "export $shlibpath_var"
- fi
- $ECHO "$cmd$args"
- exit $EXIT_SUCCESS
+ exec_cmd=\$cmd$args
fi
}
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
# func_mode_finish arg...
func_mode_finish ()
{
- $opt_debug
+ $debug_cmd
+
libs=
libdirs=
admincmds=
if func_lalib_unsafe_p "$opt"; then
func_append libs " $opt"
else
- func_warning "\`$opt' is not a valid libtool archive"
+ func_warning "'$opt' is not a valid libtool archive"
fi
else
- func_fatal_error "invalid argument \`$opt'"
+ func_fatal_error "invalid argument '$opt'"
fi
done
# Remove sysroot references
if $opt_dry_run; then
for lib in $libs; do
- echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ echo "removing references to $lt_sysroot and '=' prefixes from $lib"
done
else
tmpdir=`func_mktempdir`
for lib in $libs; do
- sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
> $tmpdir/tmp-la
mv -f $tmpdir/tmp-la $lib
done
fi
# Exit here if they wanted silent mode.
- $opt_silent && exit $EXIT_SUCCESS
+ $opt_quiet && exit $EXIT_SUCCESS
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
echo "----------------------------------------------------------------------"
echo
echo "If you ever happen to want to link against installed libraries"
echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "specify the full pathname of the library, or use the '-LLIBDIR'"
echo "flag during linking and do at least one of the following:"
if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " - add LIBDIR to the '$shlibpath_var' environment variable"
echo " during execution"
fi
if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " - add LIBDIR to the '$runpath_var' environment variable"
echo " during linking"
fi
if test -n "$hardcode_libdir_flag_spec"; then
libdir=LIBDIR
eval flag=\"$hardcode_libdir_flag_spec\"
- $ECHO " - use the \`$flag' linker flag"
+ $ECHO " - use the '$flag' linker flag"
fi
if test -n "$admincmds"; then
$ECHO " - have your system administrator run these commands:$admincmds"
fi
if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
fi
echo
exit $EXIT_SUCCESS
}
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
# func_mode_install arg...
func_mode_install ()
{
- $opt_debug
+ $debug_cmd
+
# There may be an optional sh(1) argument at the beginning of
# install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
# Allow the use of GNU shtool's install command.
- case $nonopt in *shtool*) :;; *) false;; esac; then
+ case $nonopt in *shtool*) :;; *) false;; esac
+ then
# Aesthetically quote it.
func_quote_for_eval "$nonopt"
install_prog="$func_quote_for_eval_result "
opts=
prev=
install_type=
- isdir=no
+ isdir=false
stripme=
no_mode=:
for arg
fi
case $arg in
- -d) isdir=yes ;;
+ -d) isdir=: ;;
-f)
if $install_cp; then :; else
prev=$arg
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
- if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ if test X-m = "X$prev" && test -n "$install_override_mode"; then
arg2=$install_override_mode
no_mode=false
fi
func_fatal_help "you must specify an install program"
test -n "$prev" && \
- func_fatal_help "the \`$prev' option requires an argument"
+ func_fatal_help "the '$prev' option requires an argument"
if test -n "$install_override_mode" && $no_mode; then
if $install_cp; then :; else
dest=$func_stripname_result
# Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
+ test -d "$dest" && isdir=:
+ if $isdir; then
+ destdir=$dest
destname=
else
func_dirname_and_basename "$dest" "" "."
- destdir="$func_dirname_result"
- destname="$func_basename_result"
+ destdir=$func_dirname_result
+ destname=$func_basename_result
# Not a directory, so check to see that there is only one file specified.
set dummy $files; shift
test "$#" -gt 1 && \
- func_fatal_help "\`$dest' is not a directory"
+ func_fatal_help "'$dest' is not a directory"
fi
case $destdir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
case $file in
*.lo) ;;
*)
- func_fatal_help "\`$destdir' must be an absolute directory name"
+ func_fatal_help "'$destdir' must be an absolute directory name"
;;
esac
done
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
- libtool_install_magic="$magic"
+ libtool_install_magic=$magic
staticlibs=
future_libdirs=
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$file' is not a valid libtool archive"
+ || func_fatal_help "'$file' is not a valid libtool archive"
library_names=
old_library=
fi
func_dirname "$file" "/" ""
- dir="$func_dirname_result"
+ dir=$func_dirname_result
func_append dir "$objdir"
if test -n "$relink_command"; then
# are installed into $libdir/../bin (currently, that works fine)
# but it's something to keep an eye on.
test "$inst_prefix_dir" = "$destdir" && \
- func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+ func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
fi
- func_warning "relinking \`$file'"
+ func_warning "relinking '$file'"
func_show_eval "$relink_command" \
- 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
fi
# See the names of the shared library.
set dummy $library_names; shift
if test -n "$1"; then
- realname="$1"
+ realname=$1
shift
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
+ srcname=$realname
+ test -n "$relink_command" && srcname=${realname}T
# Install the shared library and build the symlinks.
func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
'exit $?'
- tstripme="$stripme"
+ tstripme=$stripme
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
case $realname in
*.dll.a)
- tstripme=""
+ tstripme=
+ ;;
+ esac
+ ;;
+ os2*)
+ case $realname in
+ *_dll.a)
+ tstripme=
;;
esac
;;
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
+ # Try 'ln -sf' first, because the 'ln' binary might depend on
# the symlink we replace! Solaris /bin/ln does not understand -f,
# so we also need to try rm && ln -s.
for linkname
fi
# Do each command in the postinstall commands.
- lib="$destdir/$realname"
+ lib=$destdir/$realname
func_execute_cmds "$postinstall_cmds" 'exit $?'
fi
# Install the pseudo-library for information purposes.
func_basename "$file"
- name="$func_basename_result"
- instname="$dir/$name"i
+ name=$func_basename_result
+ instname=$dir/${name}i
func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
# Maybe install the static library, too.
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
+ destfile=$destdir/$destname
else
func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
fi
# Deduce the name of the destination old-style object file.
staticdest=$func_lo2o_result
;;
*.$objext)
- staticdest="$destfile"
+ staticdest=$destfile
destfile=
;;
*)
- func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ func_fatal_help "cannot copy a libtool object to '$destfile'"
;;
esac
func_show_eval "$install_prog $file $destfile" 'exit $?'
# Install the old object if enabled.
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
# Deduce the name of the old-style object file.
func_lo2o "$file"
staticobj=$func_lo2o_result
*)
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
+ destfile=$destdir/$destname
else
func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
fi
# If the file is missing, and there is a .exe on the end, strip it
# because it is most likely a libtool script we actually want to
# install
- stripped_ext=""
+ stripped_ext=
case $file in
*.exe)
if test ! -f "$file"; then
func_stripname '' '.exe' "$file"
file=$func_stripname_result
- stripped_ext=".exe"
+ stripped_ext=.exe
fi
;;
esac
# Check the variables that should have been set.
test -z "$generated_by_libtool_version" && \
- func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+ func_fatal_error "invalid libtool wrapper script '$wrapper'"
- finalize=yes
+ finalize=:
for lib in $notinst_deplibs; do
# Check to see that each library is installed.
libdir=
if test -f "$lib"; then
func_source "$lib"
fi
- libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
if test -n "$libdir" && test ! -f "$libfile"; then
- func_warning "\`$lib' has not been installed in \`$libdir'"
- finalize=no
+ func_warning "'$lib' has not been installed in '$libdir'"
+ finalize=false
fi
done
func_source "$wrapper"
outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
+ if test no = "$fast_install" && test -n "$relink_command"; then
$opt_dry_run || {
- if test "$finalize" = yes; then
+ if $finalize; then
tmpdir=`func_mktempdir`
func_basename "$file$stripped_ext"
- file="$func_basename_result"
- outputname="$tmpdir/$file"
+ file=$func_basename_result
+ outputname=$tmpdir/$file
# Replace the output file specification.
relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
- $opt_silent || {
+ $opt_quiet || {
func_quote_for_expand "$relink_command"
eval "func_echo $func_quote_for_expand_result"
}
if eval "$relink_command"; then :
else
- func_error "error: relink \`$file' with the above command before installing it"
+ func_error "error: relink '$file' with the above command before installing it"
$opt_dry_run || ${RM}r "$tmpdir"
continue
fi
- file="$outputname"
+ file=$outputname
else
- func_warning "cannot relink \`$file'"
+ func_warning "cannot relink '$file'"
fi
}
else
for file in $staticlibs; do
func_basename "$file"
- name="$func_basename_result"
+ name=$func_basename_result
# Set up the ranlib parameters.
- oldlib="$destdir/$name"
+ oldlib=$destdir/$name
func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
tool_oldlib=$func_to_tool_file_result
done
test -n "$future_libdirs" && \
- func_warning "remember to run \`$progname --finish$future_libdirs'"
+ func_warning "remember to run '$progname --finish$future_libdirs'"
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
$opt_dry_run && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
else
exit $EXIT_SUCCESS
fi
}
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
# func_generate_dlsyms outputname originator pic_p
# a dlpreopen symbol table.
func_generate_dlsyms ()
{
- $opt_debug
- my_outputname="$1"
- my_originator="$2"
- my_pic_p="${3-no}"
- my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ $debug_cmd
+
+ my_outputname=$1
+ my_originator=$2
+ my_pic_p=${3-false}
+ my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
my_dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
if test -n "$NM" && test -n "$global_symbol_pipe"; then
- my_dlsyms="${my_outputname}S.c"
+ my_dlsyms=${my_outputname}S.c
else
func_error "not configured to extract global symbols from dlpreopened files"
fi
"") ;;
*.c)
# Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${my_outputname}.nm"
+ nlist=$output_objdir/$my_outputname.nm
func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
func_verbose "creating $output_objdir/$my_dlsyms"
$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
#ifdef __cplusplus
extern \"C\" {
#endif
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
#endif
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
# define LT_DLSYM_CONST const
#endif
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
/* External symbol declarations for the compiler. */\
"
- if test "$dlself" = yes; then
- func_verbose "generating symbol list for \`$output'"
+ if test yes = "$dlself"; then
+ func_verbose "generating symbol list for '$output'"
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
for progfile in $progfiles; do
func_to_tool_file "$progfile" func_convert_file_msys_to_w32
- func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
$opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
done
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
+ export_symbols=$output_objdir/$outputname.exp
$opt_dry_run || {
$RM $export_symbols
- eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
case $host in
*cygwin* | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
}
else
$opt_dry_run || {
- eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
case $host in
fi
for dlprefile in $dlprefiles; do
- func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_verbose "extracting global C symbols from '$dlprefile'"
func_basename "$dlprefile"
- name="$func_basename_result"
+ name=$func_basename_result
case $host in
*cygwin* | *mingw* | *cegcc* )
# if an import library, we need to obtain dlname
if func_win32_import_lib_p "$dlprefile"; then
func_tr_sh "$dlprefile"
eval "curr_lafile=\$libfile_$func_tr_sh_result"
- dlprefile_dlbasename=""
+ dlprefile_dlbasename=
if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
# Use subshell, to avoid clobbering current variable values
dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
- if test -n "$dlprefile_dlname" ; then
+ if test -n "$dlprefile_dlname"; then
func_basename "$dlprefile_dlname"
- dlprefile_dlbasename="$func_basename_result"
+ dlprefile_dlbasename=$func_basename_result
else
# no lafile. user explicitly requested -dlpreopen <import library>.
$sharedlib_from_linklib_cmd "$dlprefile"
fi
fi
$opt_dry_run || {
- if test -n "$dlprefile_dlbasename" ; then
+ if test -n "$dlprefile_dlbasename"; then
eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
else
func_warning "Could not compute DLL name from $name"
echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
fi
+ func_show_eval '$RM "${nlist}I"'
+ if test -n "$global_symbol_to_import"; then
+ eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+ fi
+
echo >> "$output_objdir/$my_dlsyms" "\
/* The mapping between symbol names and symbols. */
void *address;
} lt_dlsymlist;
extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+ LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+ for (; symbol->name; ++symbol)
+ {"
+ $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+ echo >> "$output_objdir/$my_dlsyms" "\
+ }
+}"
+ fi
+ echo >> "$output_objdir/$my_dlsyms" "\
LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
- { \"$my_originator\", (void *) 0 },"
+{ {\"$my_originator\", (void *) 0},"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {\"@INIT@\", (void *) <_syminit},"
+ fi
case $need_lib_prefix in
no)
*-*-hpux*)
pic_flag_for_symtable=" $pic_flag" ;;
*)
- if test "X$my_pic_p" != Xno; then
- pic_flag_for_symtable=" $pic_flag"
- fi
+ $my_pic_p && pic_flag_for_symtable=" $pic_flag"
;;
esac
;;
func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
# Clean up the generated files.
- func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
# Transform the symbol file into the correct name.
- symfileobj="$output_objdir/${my_outputname}S.$objext"
+ symfileobj=$output_objdir/${my_outputname}S.$objext
case $host in
*cygwin* | *mingw* | *cegcc* )
if test -f "$output_objdir/$my_outputname.def"; then
esac
;;
*)
- func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ func_fatal_error "unknown suffix for '$my_dlsyms'"
;;
esac
else
fi
}
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
# func_win32_libid arg
# return the library type of file 'arg'
#
# Despite the name, also deal with 64 bit binaries.
func_win32_libid ()
{
- $opt_debug
- win32_libid_type="unknown"
+ $debug_cmd
+
+ win32_libid_type=unknown
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
*ar\ archive\ import\ library*) # definitely import
# Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
$EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
- $SED -n -e '
+ case $nm_interface in
+ "MS dumpbin")
+ if func_cygming_ms_implib_p "$1" ||
+ func_cygming_gnu_implib_p "$1"
+ then
+ win32_nmres=import
+ else
+ win32_nmres=
+ fi
+ ;;
+ *)
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
1,100{
/ I /{
- s,.*,import,
+ s|.*|import|
p
q
}
}'`
+ ;;
+ esac
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib ()
{
- $opt_debug
+ $debug_cmd
+
sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
}
# specified import library.
func_cygming_dll_for_implib_fallback_core ()
{
- $opt_debug
+ $debug_cmd
+
match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
$OBJDUMP -s --section "$1" "$2" 2>/dev/null |
$SED '/^Contents of section '"$match_literal"':/{
/./p' |
# we now have a list, one entry per line, of the stringified
# contents of the appropriate section of all members of the
- # archive which possess that section. Heuristic: eliminate
- # all those which have a first or second character that is
+ # archive that possess that section. Heuristic: eliminate
+ # all those that have a first or second character that is
# a '.' (that is, objdump's representation of an unprintable
# character.) This should work for all archives with less than
# 0x302f exports -- but will fail for DLLs whose name actually
$SED -e '/^\./d;/^.\./d;q'
}
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
- test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
- test -n "$func_cygming_ms_implib_tmp"
-}
-
# func_cygming_dll_for_implib_fallback ARG
# Platform-specific function to extract the
# name of the DLL associated with the specified
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib_fallback ()
{
- $opt_debug
- if func_cygming_gnu_implib_p "$1" ; then
+ $debug_cmd
+
+ if func_cygming_gnu_implib_p "$1"; then
# binutils import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
- elif func_cygming_ms_implib_p "$1" ; then
+ elif func_cygming_ms_implib_p "$1"; then
# ms-generated import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
else
# unknown
- sharedlib_from_linklib_result=""
+ sharedlib_from_linklib_result=
fi
}
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
- $opt_debug
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
- if test "$lock_old_archive_extraction" = yes; then
+ $debug_cmd
+
+ f_ex_an_ar_dir=$1; shift
+ f_ex_an_ar_oldlib=$1
+ if test yes = "$lock_old_archive_extraction"; then
lockfile=$f_ex_an_ar_oldlib.lock
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
fi
func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
'stat=$?; rm -f "$lockfile"; exit $stat'
- if test "$lock_old_archive_extraction" = yes; then
+ if test yes = "$lock_old_archive_extraction"; then
$opt_dry_run || rm -f "$lockfile"
fi
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
- $opt_debug
- my_gentop="$1"; shift
+ $debug_cmd
+
+ my_gentop=$1; shift
my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
+ my_oldobjs=
+ my_xlib=
+ my_xabs=
+ my_xdir=
for my_xlib in $my_oldlibs; do
# Extract the objects.
case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
func_basename "$my_xlib"
- my_xlib="$func_basename_result"
+ my_xlib=$func_basename_result
my_xlib_u=$my_xlib
while :; do
case " $extracted_archives " in
esac
done
extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
+ my_xdir=$my_gentop/$my_xlib_u
func_mkdir_p "$my_xdir"
cd $my_xdir || exit $?
darwin_archive=$my_xabs
darwin_curdir=`pwd`
- darwin_base_archive=`basename "$darwin_archive"`
+ func_basename "$darwin_archive"
+ darwin_base_archive=$func_basename_result
darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
if test -n "$darwin_arches"; then
darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
darwin_arch=
func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ for darwin_arch in $darwin_arches; do
+ func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+ $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+ cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+ func_extract_an_archive "`pwd`" "$darwin_base_archive"
cd "$darwin_curdir"
- $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
done # $darwin_arches
## Okay now we've a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
done
- func_extract_archives_result="$my_oldobjs"
+ func_extract_archives_result=$my_oldobjs
}
#
# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
# variable will take. If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
+# will assume that the directory where it is stored is
# the $objdir directory. This is a cygwin/mingw-specific
# behavior.
func_emit_wrapper ()
#! $SHELL
# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
# Very basic option parsing. These options are (a) specific to
# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
+# /script/ and the wrapper /executable/ that is used only on
# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
+# (application programs are unlikely to have options that match
# this pattern).
#
# There are only two supported options: --lt-debug and
# Print the debug banner immediately:
if test -n \"\$lt_option_debug\"; then
- echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
fi
}
lt_dump_args_N=1;
for lt_arg
do
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
done
}
*-*-mingw | *-*-os2* | *-cegcc*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir/\$program\" \${1+\"\$@\"}
test -n \"\$absdir\" && thisdir=\"\$absdir\"
"
- if test "$fast_install" = yes; then
+ if test yes = "$fast_install"; then
$ECHO "\
program=lt-'$outputname'$exeext
progdir=\"\$thisdir/$objdir\"
if test ! -f \"\$progdir/\$program\" ||
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
file=\"\$\$-\$program\"
if test -n \"\$relink_command\"; then
if relink_command_output=\`eval \$relink_command 2>&1\`; then :
else
- $ECHO \"\$relink_command_output\" >&2
+ \$ECHO \"\$relink_command_output\" >&2
$RM \"\$progdir/\$file\"
exit 1
fi
fi
# Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
$ECHO "\
# Add our own library path to $shlibpath_var
$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
fi
else
# The program doesn't exist.
- \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
\$ECHO \"This script is just a wrapper for \$program.\" 1>&2
\$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
cat <<EOF
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+ Generated by $PROGRAM (GNU $PACKAGE) $VERSION
The $output program cannot be directly executed until all the libtool
libraries that it depends on are installed.
#include <fcntl.h>
#include <sys/stat.h>
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
+#if defined __MINGW32__
# ifdef __STRICT_ANSI__
int _putenv (const char *);
# endif
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
# ifdef __STRICT_ANSI__
char *realpath (const char *, char *);
int putenv (char *);
int setenv (const char *, const char *, int);
# endif
-/* #elif defined (other platforms) ... */
+/* #elif defined other_platform || defined ... */
#endif
/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
+#if defined _MSC_VER
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-# define _INTPTR_T_DEFINED
-# define intptr_t int
-# endif
-#elif defined(__MINGW32__)
+#elif defined __MINGW32__
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
# define HAVE_SETENV
# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
+/* #elif defined other platforms ... */
#endif
-#if defined(PATH_MAX)
+#if defined PATH_MAX
# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
+#elif defined MAXPATHLEN
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
# define PATH_SEPARATOR ':'
#endif
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+ defined __OS2__
# define HAVE_DOS_BASED_FILE_SYSTEM
# define FOPEN_WB "wb"
# ifndef DIR_SEPARATOR_2
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
+ if (stale) { free (stale); stale = 0; } \
} while (0)
-#if defined(LT_DEBUGWRAPPER)
+#if defined LT_DEBUGWRAPPER
static int lt_debug = 1;
#else
static int lt_debug = 0;
EOF
cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
const char * LIB_PATH_VARNAME = "$shlibpath_var";
EOF
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
func_to_host_path "$temp_rpath"
cat <<EOF
const char * LIB_PATH_VALUE = "$func_to_host_path_result";
EOF
fi
- if test "$fast_install" = yes; then
+ if test yes = "$fast_install"; then
cat <<EOF
const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
EOF
char *actual_cwrapper_name;
char *target_name;
char *lt_argv_zero;
- intptr_t rval = 127;
+ int rval = 127;
int i;
program_name = (char *) xstrdup (base_name (argv[0]));
- newargz = XMALLOC (char *, argc + 1);
+ newargz = XMALLOC (char *, (size_t) argc + 1);
/* very simple arg parsing; don't want to rely on getopt
* also, copy all non cwrapper options to newargz, except
newargc=0;
for (i = 1; i < argc; i++)
{
- if (strcmp (argv[i], dumpscript_opt) == 0)
+ if (STREQ (argv[i], dumpscript_opt))
{
EOF
- case "$host" in
+ case $host in
*mingw* | *cygwin* )
# make stdout use "unix" line endings
echo " setmode(1,_O_BINARY);"
lt_dump_script (stdout);
return 0;
}
- if (strcmp (argv[i], debug_opt) == 0)
+ if (STREQ (argv[i], debug_opt))
{
lt_debug = 1;
continue;
}
- if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ if (STREQ (argv[i], ltwrapper_option_prefix))
{
/* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
namespace, but it is not one of the ones we know about and
EOF
cat <<EOF
/* The GNU banner must be the first non-error debug message */
- lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
EOF
cat <<"EOF"
lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
cat <<"EOF"
/* execv doesn't actually work on mingw as expected on unix */
newargz = prepare_spawn (newargz);
- rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
if (rval == -1)
{
/* failed to start process */
{
const char *base;
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
/* Skip over the disk name in MSDOS pathnames. */
if (isalpha ((unsigned char) name[0]) && name[1] == ':')
name += 2;
const char *p_next;
/* static buffer for getcwd */
char tmp[LT_PATHMAX + 1];
- int tmp_len;
+ size_t tmp_len;
char *concat_name;
lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
return NULL;
/* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
{
concat_name = xstrdup (wrapper);
return concat_name;
XFREE (concat_name);
}
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
}
#endif
for (q = p; *q; q++)
if (IS_PATH_SEPARATOR (*q))
break;
- p_len = q - p;
+ p_len = (size_t) (q - p);
p_next = (*q == '\0' ? q : q + 1);
if (p_len == 0)
{
if (patlen <= len)
{
str += len - patlen;
- if (strcmp (str, pat) == 0)
+ if (STREQ (str, pat))
*str = '\0';
}
return str;
char *str = xstrdup (value);
setenv (name, str, 1);
#else
- int len = strlen (name) + 1 + strlen (value) + 1;
+ size_t len = strlen (name) + 1 + strlen (value) + 1;
char *str = XMALLOC (char, len);
sprintf (str, "%s=%s", name, value);
if (putenv (str) != EXIT_SUCCESS)
char *new_value;
if (orig_value && *orig_value)
{
- int orig_value_len = strlen (orig_value);
- int add_len = strlen (add);
+ size_t orig_value_len = strlen (orig_value);
+ size_t add_len = strlen (add);
new_value = XMALLOC (char, add_len + orig_value_len + 1);
if (to_end)
{
{
char *new_value = lt_extend_str (getenv (name), value, 0);
/* some systems can't cope with a ':'-terminated path #' */
- int len = strlen (new_value);
- while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ size_t len = strlen (new_value);
+ while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
{
- new_value[len-1] = '\0';
+ new_value[--len] = '\0';
}
lt_setenv (name, new_value);
XFREE (new_value);
# True if ARG is an import lib, as indicated by $file_magic_cmd
func_win32_import_lib_p ()
{
- $opt_debug
+ $debug_cmd
+
case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
*import*) : ;;
*) false ;;
esac
}
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+ $debug_cmd
+
+ case " $compile_command " in
+ *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+ suncc_use_cstd_abi=no
+ ;;
+ *)
+ suncc_use_cstd_abi=yes
+ ;;
+ esac
+}
+
# func_mode_link arg...
func_mode_link ()
{
- $opt_debug
+ $debug_cmd
+
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
+ # what system we are compiling for in order to pass an extra
# flag for every libtool invocation.
# allow_undefined=no
# FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
+ # to make a dll that has undefined symbols, in which case not
# even a static library is built. For now, we need to specify
# -no-undefined on the libtool link line when we can be certain
# that all symbols are satisfied, otherwise we get a static library.
module=no
no_install=no
objs=
+ os2dllname=
non_pic_objects=
precious_files_regex=
prefer_static_libs=no
- preload=no
+ preload=false
prev=
prevarg=
release=
vinfo=
vinfo_number=no
weak_libs=
- single_module="${wl}-single_module"
+ single_module=$wl-single_module
func_infer_tag $base_compile
# We need to know -static, to get the right output filenames.
do
case $arg in
-shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
+ test yes != "$build_libtool_libs" \
+ && func_fatal_configuration "cannot build a shared library"
build_old_libs=no
break
;;
-all-static | -static | -static-libtool-libs)
case $arg in
-all-static)
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
func_warning "complete static linking is impossible in this configuration"
fi
if test -n "$link_static_flag"; then
# Go through the arguments, transforming them on the way.
while test "$#" -gt 0; do
- arg="$1"
+ arg=$1
shift
func_quote_for_eval "$arg"
qarg=$func_quote_for_eval_unquoted_result
case $prev in
bindir)
- bindir="$arg"
+ bindir=$arg
prev=
continue
;;
dlfiles|dlprefiles)
- if test "$preload" = no; then
+ $preload || {
# Add the symbol object into the linking commands.
func_append compile_command " @SYMFILE@"
func_append finalize_command " @SYMFILE@"
- preload=yes
- fi
+ preload=:
+ }
case $arg in
*.la | *.lo) ;; # We handle these cases below.
force)
- if test "$dlself" = no; then
+ if test no = "$dlself"; then
dlself=needless
export_dynamic=yes
fi
continue
;;
self)
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
dlself=yes
else
dlself=needless
continue
;;
*)
- if test "$prev" = dlfiles; then
+ if test dlfiles = "$prev"; then
func_append dlfiles " $arg"
else
func_append dlprefiles " $arg"
esac
;;
expsyms)
- export_symbols="$arg"
+ export_symbols=$arg
test -f "$arg" \
- || func_fatal_error "symbol file \`$arg' does not exist"
+ || func_fatal_error "symbol file '$arg' does not exist"
prev=
continue
;;
expsyms_regex)
- export_symbols_regex="$arg"
+ export_symbols_regex=$arg
prev=
continue
;;
continue
;;
inst_prefix)
- inst_prefix_dir="$arg"
+ inst_prefix_dir=$arg
+ prev=
+ continue
+ ;;
+ mllvm)
+ # Clang does not use LLVM to link, so we can simply discard any
+ # '-mllvm $arg' options when doing the link step.
prev=
continue
;;
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
- if test "$pic_object" != none; then
+ if test none != "$pic_object"; then
# Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
+ pic_object=$xdir$pic_object
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
fi
# CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
# A PIC object.
func_append libobjs " $pic_object"
- arg="$pic_object"
+ arg=$pic_object
fi
# Non-PIC object.
- if test "$non_pic_object" != none; then
+ if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
+ non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
+ non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
- func_fatal_error "\`$arg' is not a valid libtool object"
+ func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
done
else
- func_fatal_error "link input file \`$arg' does not exist"
+ func_fatal_error "link input file '$arg' does not exist"
fi
arg=$save_arg
prev=
continue
;;
+ os2dllname)
+ os2dllname=$arg
+ prev=
+ continue
+ ;;
precious_regex)
- precious_files_regex="$arg"
+ precious_files_regex=$arg
prev=
continue
;;
release)
- release="-$arg"
+ release=-$arg
prev=
continue
;;
func_fatal_error "only absolute run-paths are allowed"
;;
esac
- if test "$prev" = rpath; then
+ if test rpath = "$prev"; then
case "$rpath " in
*" $arg "*) ;;
*) func_append rpath " $arg" ;;
continue
;;
shrext)
- shrext_cmds="$arg"
+ shrext_cmds=$arg
prev=
continue
;;
esac
fi # test -n "$prev"
- prevarg="$arg"
+ prevarg=$arg
case $arg in
-all-static)
-allow-undefined)
# FIXME: remove this flag sometime in the future.
- func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ func_fatal_error "'-allow-undefined' must not be used because it is the default"
;;
-avoid-version)
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
func_fatal_error "more than one -exported-symbols argument is not allowed"
fi
- if test "X$arg" = "X-export-symbols"; then
+ if test X-export-symbols = "X$arg"; then
prev=expsyms
else
prev=expsyms_regex
func_stripname "-L" '' "$arg"
if test -z "$func_stripname_result"; then
if test "$#" -gt 0; then
- func_fatal_error "require no space between \`-L' and \`$1'"
+ func_fatal_error "require no space between '-L' and '$1'"
else
- func_fatal_error "need path for \`-L' option"
+ func_fatal_error "need path for '-L' option"
fi
fi
func_resolve_sysroot "$func_stripname_result"
*)
absdir=`cd "$dir" && pwd`
test -z "$absdir" && \
- func_fatal_error "cannot determine absolute directory name of \`$dir'"
- dir="$absdir"
+ func_fatal_error "cannot determine absolute directory name of '$dir'"
+ dir=$absdir
;;
esac
case "$deplibs " in
;;
-l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ if test X-lc = "X$arg" || test X-lm = "X$arg"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
# These systems don't actually have a C or math library (as such)
;;
*-*-os2*)
# These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
# Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
;;
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
esac
- elif test "X$arg" = "X-lc_r"; then
+ elif test X-lc_r = "X$arg"; then
case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
continue
;;
+ -mllvm)
+ prev=mllvm
+ continue
+ ;;
+
-module)
module=yes
continue
;;
-multi_module)
- single_module="${wl}-multi_module"
+ single_module=$wl-multi_module
continue
;;
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
# The PATH hackery in wrapper scripts is required on Windows
# and Darwin in order for the loader to find any dlls it needs.
- func_warning "\`-no-install' is ignored for $host"
- func_warning "assuming \`-no-fast-install' instead"
+ func_warning "'-no-install' is ignored for $host"
+ func_warning "assuming '-no-fast-install' instead"
fast_install=no
;;
*) no_install=yes ;;
continue
;;
+ -os2dllname)
+ prev=os2dllname
+ continue
+ ;;
+
-o) prev=output ;;
-precious-files-regex)
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
arg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for flag in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_quote_for_eval "$flag"
func_append arg " $func_quote_for_eval_result"
func_append compiler_flags " $func_quote_for_eval_result"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
func_stripname '-Wl,' '' "$arg"
args=$func_stripname_result
arg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for flag in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_quote_for_eval "$flag"
func_append arg " $wl$func_quote_for_eval_result"
func_append compiler_flags " $wl$func_quote_for_eval_result"
func_append linker_flags " $func_quote_for_eval_result"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
# -msg_* for osf cc
-msg_*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
# Flags to be passed through unchanged, with rationale:
# -m*, -t[45]*, -txscale* architecture-specific flags for GCC
# -F/path path to uninstalled frameworks, gcc on darwin
# -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # -fstack-protector* stack protector flags for GCC
# @file GCC response files
# -tp=* Portland pgcc target processor selection
# --sysroot=* for sysroot support
- # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
# -stdlib=* select c++ std lib with clang
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
- -O*|-flto*|-fwhopr*|-fuse-linker-plugin|-stdlib=*)
+ -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
func_append compile_command " $arg"
func_append finalize_command " $arg"
func_append compiler_flags " $arg"
continue
;;
+ -Z*)
+ if test os2 = "`expr $host : '.*\(os2\)'`"; then
+ # OS/2 uses -Zxxx to specify OS/2-specific options
+ compiler_flags="$compiler_flags $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case $arg in
+ -Zlinker | -Zstack)
+ prev=xcompiler
+ ;;
+ esac
+ continue
+ else
+ # Otherwise treat like 'Some other compiler flag' below
+ func_quote_for_eval "$arg"
+ arg=$func_quote_for_eval_result
+ fi
+ ;;
+
# Some other compiler flag.
-* | +*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
*.$objext)
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
- if test "$pic_object" != none; then
+ test none = "$pic_object" || {
# Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
+ pic_object=$xdir$pic_object
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
fi
# CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
# A PIC object.
func_append libobjs " $pic_object"
- arg="$pic_object"
- fi
+ arg=$pic_object
+ }
# Non-PIC object.
- if test "$non_pic_object" != none; then
+ if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
+ non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
+ non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
- func_fatal_error "\`$arg' is not a valid libtool object"
+ func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
;;
# A libtool-controlled library.
func_resolve_sysroot "$arg"
- if test "$prev" = dlfiles; then
+ if test dlfiles = "$prev"; then
# This library was specified with -dlopen.
func_append dlfiles " $func_resolve_sysroot_result"
prev=
- elif test "$prev" = dlprefiles; then
+ elif test dlprefiles = "$prev"; then
# The library was specified with -dlpreopen.
func_append dlprefiles " $func_resolve_sysroot_result"
prev=
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
esac # arg
done # argument parsing loop
test -n "$prev" && \
- func_fatal_help "the \`$prevarg' option requires an argument"
+ func_fatal_help "the '$prevarg' option requires an argument"
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
eval arg=\"$export_dynamic_flag_spec\"
func_append compile_command " $arg"
func_append finalize_command " $arg"
oldlibs=
# calculate the name of the file, without its directory
func_basename "$output"
- outputname="$func_basename_result"
- libobjs_save="$libobjs"
+ outputname=$func_basename_result
+ libobjs_save=$libobjs
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
else
shlib_search_path=
fi
eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+ # Definition is injected by LT_CONFIG during libtool generation.
+ func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
func_dirname "$output" "/" ""
- output_objdir="$func_dirname_result$objdir"
+ output_objdir=$func_dirname_result$objdir
func_to_tool_file "$output_objdir/"
tool_output_objdir=$func_to_tool_file_result
# Create the object directory.
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
func_append libs " $deplib"
done
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
libs="$predeps $libs $compiler_lib_search_path $postdeps"
# Compute libraries that are listed more than once in $predeps
case $file in
*.la) ;;
*)
- func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
;;
esac
done
prog)
compile_deplibs=
finalize_deplibs=
- alldeplibs=no
+ alldeplibs=false
newdlfiles=
newdlprefiles=
passes="conv scan dlopen dlpreopen link"
for pass in $passes; do
# The preopen pass in lib mode reverses $deplibs; put it back here
# so that -L comes before libs that need it for instance...
- if test "$linkmode,$pass" = "lib,link"; then
+ if test lib,link = "$linkmode,$pass"; then
## FIXME: Find the place where the list is rebuilt in the wrong
## order, and fix it there properly
tmp_deplibs=
for deplib in $deplibs; do
tmp_deplibs="$deplib $tmp_deplibs"
done
- deplibs="$tmp_deplibs"
+ deplibs=$tmp_deplibs
fi
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass"; then
+ libs=$deplibs
deplibs=
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
+ dlopen) libs=$dlfiles ;;
+ dlpreopen) libs=$dlprefiles ;;
link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
esac
fi
- if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ if test lib,dlpreopen = "$linkmode,$pass"; then
# Collect and forward deplibs of preopened libtool libs
for lib in $dlprefiles; do
# Ignore non-libtool-libs
esac
done
done
- libs="$dlprefiles"
+ libs=$dlprefiles
fi
- if test "$pass" = dlopen; then
+ if test dlopen = "$pass"; then
# Collect dlpreopened libraries
- save_deplibs="$deplibs"
+ save_deplibs=$deplibs
deplibs=
fi
for deplib in $libs; do
lib=
- found=no
+ found=false
case $deplib in
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
|-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
func_append compiler_flags " $deplib"
- if test "$linkmode" = lib ; then
+ if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
continue
;;
-l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- func_warning "\`-l' is ignored for archives/objects"
+ if test lib != "$linkmode" && test prog != "$linkmode"; then
+ func_warning "'-l' is ignored for archives/objects"
continue
fi
func_stripname '-l' '' "$deplib"
name=$func_stripname_result
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
else
searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
for searchdir in $searchdirs; do
for search_ext in .la $std_shrext .so .a; do
# Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
+ lib=$searchdir/lib$name$search_ext
if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
+ if test .la = "$search_ext"; then
+ found=:
else
- found=no
+ found=false
fi
break 2
fi
done
done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
+ if $found; then
+ # deplib is a libtool library
# If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
# We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $deplib "*)
if func_lalib_p "$lib"; then
old_library=
func_source "$lib"
for l in $old_library $library_names; do
- ll="$l"
+ ll=$l
done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
+ if test "X$ll" = "X$old_library"; then # only static version available
+ found=false
func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
+ ladir=$func_dirname_result
lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
fi
continue
fi
*) ;;
esac
fi
+ else
+ # deplib doesn't seem to be a libtool library
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
fi
;; # -l
*.ltframework)
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- if test "$linkmode" = lib ; then
+ if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
case $linkmode in
lib)
deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
+ test conv = "$pass" && continue
newdependency_libs="$deplib $newdependency_libs"
func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
prog)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
- if test "$pass" = scan; then
+ if test scan = "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
*)
- func_warning "\`-L' is ignored for archives/objects"
+ func_warning "'-L' is ignored for archives/objects"
;;
esac # linkmode
continue
;; # -L
-R*)
- if test "$pass" = link; then
+ if test link = "$pass"; then
func_stripname '-R' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
dir=$func_resolve_sysroot_result
lib=$func_resolve_sysroot_result
;;
*.$libext)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
case " $dlpreconveniencelibs " in
*" $deplib "*) ;;
*)
- valid_a_lib=no
+ valid_a_lib=false
case $deplibs_check_method in
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
+ valid_a_lib=:
fi
;;
pass_all)
- valid_a_lib=yes
+ valid_a_lib=:
;;
esac
- if test "$valid_a_lib" != yes; then
+ if $valid_a_lib; then
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ else
echo
$ECHO "*** Warning: Trying to link with static lib archive $deplib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because the file extensions .$libext of this argument makes me believe"
echo "*** that it is just a static archive that I should not use here."
- else
- echo
- $ECHO "*** Warning: Linking the shared library $output against the"
- $ECHO "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
fi
;;
esac
continue
;;
prog)
- if test "$pass" != link; then
+ if test link != "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
esac # linkmode
;; # *.$libext
*.lo | *.$objext)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ elif test prog = "$linkmode"; then
+ if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
func_append newdlprefiles " $deplib"
continue
;;
%DEPLIBS%)
- alldeplibs=yes
+ alldeplibs=:
continue
;;
esac # case $deplib
- if test "$found" = yes || test -f "$lib"; then :
- else
- func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
- fi
+ $found || test -f "$lib" \
+ || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$lib" \
- || func_fatal_error "\`$lib' is not a valid libtool archive"
+ || func_fatal_error "'$lib' is not a valid libtool archive"
func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
+ ladir=$func_dirname_result
dlname=
dlopen=
done
fi
dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass" ||
+ { test prog != "$linkmode" && test lib != "$linkmode"; }; then
test -n "$dlopen" && func_append dlfiles " $dlopen"
test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
fi
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
# Only check for convenience libraries
deplibs="$lib $deplibs"
if test -z "$libdir"; then
if test -z "$old_library"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
+ func_fatal_error "cannot find name of link library for '$lib'"
fi
# It is a libtool convenience library, so add in its objects.
func_append convenience " $ladir/$objdir/$old_library"
func_append old_convenience " $ladir/$objdir/$old_library"
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- func_fatal_error "\`$lib' is not a convenience library"
+ elif test prog != "$linkmode" && test lib != "$linkmode"; then
+ func_fatal_error "'$lib' is not a convenience library"
fi
tmp_libs=
for deplib in $dependency_libs; do
deplibs="$deplib $deplibs"
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
# Get the name of the library we link against.
linklib=
if test -n "$old_library" &&
- { test "$prefer_static_libs" = yes ||
- test "$prefer_static_libs,$installed" = "built,no"; }; then
+ { test yes = "$prefer_static_libs" ||
+ test built,no = "$prefer_static_libs,$installed"; }; then
linklib=$old_library
else
for l in $old_library $library_names; do
- linklib="$l"
+ linklib=$l
done
fi
if test -z "$linklib"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
+ func_fatal_error "cannot find name of link library for '$lib'"
fi
# This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
- fi
+ if test dlopen = "$pass"; then
+ test -z "$libdir" \
+ && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
+ test yes != "$dlopen_support" ||
+ test no = "$build_libtool_libs"
+ then
# If there is no dlname, no dlopen support or we're linking
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
# We need an absolute path.
case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
*)
abs_ladir=`cd "$ladir" && pwd`
if test -z "$abs_ladir"; then
- func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "cannot determine absolute directory name of '$ladir'"
func_warning "passing it literally to the linker, although it might fail"
- abs_ladir="$ladir"
+ abs_ladir=$ladir
fi
;;
esac
func_basename "$lib"
- laname="$func_basename_result"
+ laname=$func_basename_result
# Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
+ if test yes = "$installed"; then
if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- func_warning "library \`$lib' was moved."
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
+ func_warning "library '$lib' was moved."
+ dir=$ladir
+ absdir=$abs_ladir
+ libdir=$abs_ladir
else
- dir="$lt_sysroot$libdir"
- absdir="$lt_sysroot$libdir"
+ dir=$lt_sysroot$libdir
+ absdir=$lt_sysroot$libdir
fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ test yes = "$hardcode_automatic" && avoidtemprpath=yes
else
if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
+ dir=$ladir
+ absdir=$abs_ladir
# Remove this search path later
func_append notinst_path " $abs_ladir"
else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
+ dir=$ladir/$objdir
+ absdir=$abs_ladir/$objdir
# Remove this search path later
func_append notinst_path " $abs_ladir"
fi
name=$func_stripname_result
# This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir" && test "$linkmode" = prog; then
- func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ if test dlpreopen = "$pass"; then
+ if test -z "$libdir" && test prog = "$linkmode"; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
fi
- case "$host" in
+ case $host in
# special handling for platforms with PE-DLLs.
*cygwin* | *mingw* | *cegcc* )
# Linker will automatically link against shared library if both
if test -z "$libdir"; then
# Link the convenience library
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
+ elif test prog,link = "$linkmode,$pass"; then
compile_deplibs="$dir/$old_library $compile_deplibs"
finalize_deplibs="$dir/$old_library $finalize_deplibs"
else
fi
- if test "$linkmode" = prog && test "$pass" != link; then
+ if test prog = "$linkmode" && test link != "$pass"; then
func_append newlib_search_path " $ladir"
deplibs="$lib $deplibs"
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
+ linkalldeplibs=false
+ if test no != "$link_all_deplibs" || test -z "$library_names" ||
+ test no = "$build_libtool_libs"; then
+ linkalldeplibs=:
fi
tmp_libs=
;;
esac
# Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
+ if $linkalldeplibs; then
deplibs="$deplib $deplibs"
else
# Need to hardcode shared library paths
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
continue
fi # $linkmode = prog...
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ { { test no = "$prefer_static_libs" ||
+ test built,yes = "$prefer_static_libs,$installed"; } ||
test -z "$old_library"; }; then
# We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
# Make sure the rpath contains only unique directories.
- case "$temp_rpath:" in
+ case $temp_rpath: in
*"$absdir:"*) ;;
*) func_append temp_rpath "$absdir:" ;;
esac
esac
fi # $linkmode,$pass = prog,link...
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
+ if $alldeplibs &&
+ { test pass_all = "$deplibs_check_method" ||
+ { test yes = "$build_libtool_libs" &&
test -n "$library_names"; }; }; then
# We only need to search for static libraries
continue
link_static=no # Whether the deplib will be linked statically
use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes; then
+ if test built = "$use_static_libs" && test yes = "$installed"; then
use_static_libs=no
fi
if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ { test no = "$use_static_libs" || test -z "$old_library"; }; then
case $host in
- *cygwin* | *mingw* | *cegcc*)
+ *cygwin* | *mingw* | *cegcc* | *os2*)
# No point in relinking DLLs because paths are not encoded
func_append notinst_deplibs " $lib"
need_relink=no
;;
*)
- if test "$installed" = no; then
+ if test no = "$installed"; then
func_append notinst_deplibs " $lib"
need_relink=yes
fi
# Warn about portability, can't link against -module's on some
# systems (darwin). Don't bleat about dlopened modules though!
- dlopenmodule=""
+ dlopenmodule=
for dlpremoduletest in $dlprefiles; do
if test "X$dlpremoduletest" = "X$lib"; then
- dlopenmodule="$dlpremoduletest"
+ dlopenmodule=$dlpremoduletest
break
fi
done
- if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
echo
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
$ECHO "*** Warning: Linking the executable $output against the loadable module"
else
$ECHO "*** Warning: Linking the shared library $output against the loadable module"
fi
$ECHO "*** $linklib is not portable!"
fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
+ if test lib = "$linkmode" &&
+ test yes = "$hardcode_into_libs"; then
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
# figure out the soname
set dummy $library_names
shift
- realname="$1"
+ realname=$1
shift
libname=`eval "\\$ECHO \"$libname_spec\""`
# use dlname if we got it. it's perfectly good, no?
if test -n "$dlname"; then
- soname="$dlname"
+ soname=$dlname
elif test -n "$soname_spec"; then
# bleh windows
case $host in
- *cygwin* | mingw* | *cegcc*)
+ *cygwin* | mingw* | *cegcc* | *os2*)
func_arith $current - $age
major=$func_arith_result
- versuffix="-$major"
+ versuffix=-$major
;;
esac
eval soname=\"$soname_spec\"
else
- soname="$realname"
+ soname=$realname
fi
# Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
+ soroot=$soname
func_basename "$soroot"
- soname="$func_basename_result"
+ soname=$func_basename_result
func_stripname 'lib' '.dll' "$soname"
newlib=libimp-$func_stripname_result.a
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
- func_verbose "extracting exported symbol list from \`$soname'"
+ func_verbose "extracting exported symbol list from '$soname'"
func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
fi
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
- func_verbose "generating import library for \`$soname'"
+ func_verbose "generating import library for '$soname'"
func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
fi
# make sure the library variables are pointing to the new library
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
- if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ if test prog = "$linkmode" || test relink != "$opt_mode"; then
add_shlibpath=
add_dir=
add=
lib_linked=yes
case $hardcode_action in
immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
+ if test no = "$hardcode_direct"; then
+ add=$dir/$linklib
case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+ *-*-sysv4*uw2*) add_dir=-L$dir ;;
*-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-unixware7*) add_dir=-L$dir ;;
*-*-darwin* )
- # if the lib is a (non-dlopened) module then we can not
+ # if the lib is a (non-dlopened) module then we cannot
# link against it, someone is ignoring the earlier warnings
if /usr/bin/file -L $add 2> /dev/null |
- $GREP ": [^:]* bundle" >/dev/null ; then
+ $GREP ": [^:]* bundle" >/dev/null; then
if test "X$dlopenmodule" != "X$lib"; then
$ECHO "*** Warning: lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
+ if test -z "$old_library"; then
echo
echo "*** And there doesn't seem to be a static archive available"
echo "*** The link will probably fail, sorry"
else
- add="$dir/$old_library"
+ add=$dir/$old_library
fi
elif test -n "$old_library"; then
- add="$dir/$old_library"
+ add=$dir/$old_library
fi
fi
esac
- elif test "$hardcode_minus_L" = no; then
+ elif test no = "$hardcode_minus_L"; then
case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
+ *-*-sunos*) add_shlibpath=$dir ;;
esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
+ add_dir=-L$dir
+ add=-l$name
+ elif test no = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
else
lib_linked=no
fi
;;
relink)
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$absdir"
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$dir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$absdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
;;
esac
fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
else
lib_linked=no
fi
*) lib_linked=no ;;
esac
- if test "$lib_linked" != yes; then
+ if test yes != "$lib_linked"; then
func_fatal_configuration "unsupported hardcode properties"
fi
*) func_append compile_shlibpath "$add_shlibpath:" ;;
esac
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
test -n "$add" && compile_deplibs="$add $compile_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes &&
- test "$hardcode_minus_L" != yes &&
- test "$hardcode_shlibpath_var" = yes; then
+ if test yes != "$hardcode_direct" &&
+ test yes != "$hardcode_minus_L" &&
+ test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
fi
fi
- if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ if test prog = "$linkmode" || test relink = "$opt_mode"; then
add_shlibpath=
add_dir=
add=
# Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$libdir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$libdir
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
+ add=-l$name
+ elif test yes = "$hardcode_automatic"; then
if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
+ test -f "$inst_prefix_dir$libdir/$linklib"; then
+ add=$inst_prefix_dir$libdir/$linklib
else
- add="$libdir/$linklib"
+ add=$libdir/$linklib
fi
else
# We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
+ add_dir=-L$libdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
;;
esac
fi
- add="-l$name"
+ add=-l$name
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
else
test -n "$add" && deplibs="$add $deplibs"
fi
fi
- elif test "$linkmode" = prog; then
+ elif test prog = "$linkmode"; then
# Here we assume that one of hardcode_direct or hardcode_minus_L
# is not unsupported. This is valid on all known static and
# shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
+ if test unsupported != "$hardcode_direct"; then
+ test -n "$old_library" && linklib=$old_library
compile_deplibs="$dir/$linklib $compile_deplibs"
finalize_deplibs="$dir/$linklib $finalize_deplibs"
else
compile_deplibs="-l$name -L$dir $compile_deplibs"
finalize_deplibs="-l$name -L$dir $finalize_deplibs"
fi
- elif test "$build_libtool_libs" = yes; then
+ elif test yes = "$build_libtool_libs"; then
# Not a shared library
- if test "$deplibs_check_method" != pass_all; then
+ if test pass_all != "$deplibs_check_method"; then
# We're trying link a shared library against a static one
# but the system doesn't support it.
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
echo
- $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ $ECHO "*** Warning: This system cannot link to static lib archive $lib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
+ if test yes = "$module"; then
echo "*** But as you try to build a module library, libtool will still create "
echo "*** a static module, that should work as long as the dlopening application"
echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
- if test "$build_old_libs" = no; then
+ if test no = "$build_old_libs"; then
build_libtool_libs=module
build_old_libs=yes
else
fi
fi # link shared/static library?
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
+ { test yes != "$hardcode_into_libs" ||
+ test yes = "$build_old_libs" ||
+ test yes = "$link_static"; }; then
# Extract -R from dependency_libs
temp_deplibs=
for libdir in $dependency_libs; do
*) func_append temp_deplibs " $libdir";;
esac
done
- dependency_libs="$temp_deplibs"
+ dependency_libs=$temp_deplibs
fi
func_append newlib_search_path " $absdir"
# Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
tmp_libs=
for deplib in $dependency_libs; do
func_resolve_sysroot "$func_stripname_result";;
*) func_resolve_sysroot "$deplib" ;;
esac
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $func_resolve_sysroot_result "*)
func_append specialdeplibs " $func_resolve_sysroot_result" ;;
func_append tmp_libs " $func_resolve_sysroot_result"
done
- if test "$link_all_deplibs" != no; then
+ if test no != "$link_all_deplibs"; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
path=
case $deplib in
- -L*) path="$deplib" ;;
+ -L*) path=$deplib ;;
*.la)
func_resolve_sysroot "$deplib"
deplib=$func_resolve_sysroot_result
dir=$func_dirname_result
# We need an absolute path.
case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
- func_warning "cannot determine absolute directory name of \`$dir'"
- absdir="$dir"
+ func_warning "cannot determine absolute directory name of '$dir'"
+ absdir=$dir
fi
;;
esac
case $host in
*-*-darwin*)
depdepl=
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
+ eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names"; then
+ for tmp in $deplibrary_names; do
depdepl=$tmp
done
- if test -f "$absdir/$objdir/$depdepl" ; then
- depdepl="$absdir/$objdir/$depdepl"
- darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -f "$absdir/$objdir/$depdepl"; then
+ depdepl=$absdir/$objdir/$depdepl
+ darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
if test -z "$darwin_install_name"; then
- darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
fi
- func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
- func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+ func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
path=
fi
fi
;;
*)
- path="-L$absdir/$objdir"
+ path=-L$absdir/$objdir
;;
esac
else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_fatal_error "'$deplib' is not a valid libtool archive"
test "$absdir" != "$libdir" && \
- func_warning "\`$deplib' seems to be moved"
+ func_warning "'$deplib' seems to be moved"
- path="-L$absdir"
+ path=-L$absdir
fi
;;
esac
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
- if test "$pass" = link; then
- if test "$linkmode" = "prog"; then
+ if test link = "$pass"; then
+ if test prog = "$linkmode"; then
compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
else
compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
fi
fi
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
+ dependency_libs=$newdependency_libs
+ if test dlpreopen = "$pass"; then
# Link the dlpreopened libraries before other libraries
for deplib in $save_deplibs; do
deplibs="$deplib $deplibs"
done
fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
+ if test dlopen != "$pass"; then
+ test conv = "$pass" || {
# Make sure lib_search_path contains only unique directories.
lib_search_path=
for dir in $newlib_search_path; do
esac
done
newlib_search_path=
- fi
+ }
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
+ if test prog,link = "$linkmode,$pass"; then
vars="compile_deplibs finalize_deplibs"
+ else
+ vars=deplibs
fi
for var in $vars dependency_libs; do
# Add libraries to $var in reverse order
eval $var=\"$tmp_libs\"
done # for var
fi
+
+ # Add Sun CC postdeps if required:
+ test CXX = "$tagname" && {
+ case $host_os in
+ linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C++ 5.9
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ func_cc_basename "$CC"
+ case $func_cc_basename_result in
+ CC* | sunCC*)
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ }
+
# Last step: remove runtime libs from dependency_libs
# (they stay in deplibs)
tmp_libs=
- for i in $dependency_libs ; do
+ for i in $dependency_libs; do
case " $predeps $postdeps $compiler_lib_search_path " in
*" $i "*)
- i=""
+ i=
;;
esac
- if test -n "$i" ; then
+ if test -n "$i"; then
func_append tmp_libs " $i"
fi
done
dependency_libs=$tmp_libs
done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
+ if test prog = "$linkmode"; then
+ dlfiles=$newdlfiles
fi
- if test "$linkmode" = prog || test "$linkmode" = lib; then
- dlprefiles="$newdlprefiles"
+ if test prog = "$linkmode" || test lib = "$linkmode"; then
+ dlprefiles=$newdlprefiles
fi
case $linkmode in
oldlib)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for archives"
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for archives"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ func_warning "'-l' and '-L' are ignored for archives" ;;
esac
test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for archives"
+ func_warning "'-rpath' is ignored for archives"
test -n "$xrpath" && \
- func_warning "\`-R' is ignored for archives"
+ func_warning "'-R' is ignored for archives"
test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for archives"
+ func_warning "'-version-info/-version-number' is ignored for archives"
test -n "$release" && \
- func_warning "\`-release' is ignored for archives"
+ func_warning "'-release' is ignored for archives"
test -n "$export_symbols$export_symbols_regex" && \
- func_warning "\`-export-symbols' is ignored for archives"
+ func_warning "'-export-symbols' is ignored for archives"
# Now set the variables for building old libraries.
build_libtool_libs=no
- oldlibs="$output"
+ oldlibs=$output
func_append objs "$old_deplibs"
;;
lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
+ # Make sure we only generate libraries of the form 'libNAME.la'.
case $outputname in
lib*)
func_stripname 'lib' '.la' "$outputname"
eval libname=\"$libname_spec\"
;;
*)
- test "$module" = no && \
- func_fatal_help "libtool library \`$output' must begin with \`lib'"
+ test no = "$module" \
+ && func_fatal_help "libtool library '$output' must begin with 'lib'"
- if test "$need_lib_prefix" != no; then
+ if test no != "$need_lib_prefix"; then
# Add the "lib" prefix for modules if required
func_stripname '' '.la' "$outputname"
name=$func_stripname_result
esac
if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ if test pass_all != "$deplibs_check_method"; then
+ func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
else
echo
$ECHO "*** Warning: Linking the shared library $output against the non-libtool"
fi
fi
- test "$dlself" != no && \
- func_warning "\`-dlopen self' is ignored for libtool libraries"
+ test no = "$dlself" \
+ || func_warning "'-dlopen self' is ignored for libtool libraries"
set dummy $rpath
shift
- test "$#" -gt 1 && \
- func_warning "ignoring multiple \`-rpath's for a libtool library"
+ test 1 -lt "$#" \
+ && func_warning "ignoring multiple '-rpath's for a libtool library"
- install_libdir="$1"
+ install_libdir=$1
oldlibs=
if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
# Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
+ # Some compilers have problems with a '.al' extension so
# convenience libraries should have the same extension an
# archive normally would.
oldlibs="$output_objdir/$libname.$libext $oldlibs"
fi
test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+ func_warning "'-version-info/-version-number' is ignored for convenience libraries"
test -n "$release" && \
- func_warning "\`-release' is ignored for convenience libraries"
+ func_warning "'-release' is ignored for convenience libraries"
else
# Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
+ save_ifs=$IFS; IFS=:
set dummy $vinfo 0 0 0
shift
- IFS="$save_ifs"
+ IFS=$save_ifs
test -n "$7" && \
- func_fatal_help "too many parameters to \`-version-info'"
+ func_fatal_help "too many parameters to '-version-info'"
# convert absolute version numbers to libtool ages
# this retains compatibility with .la files and attempts
case $vinfo_number in
yes)
- number_major="$1"
- number_minor="$2"
- number_revision="$3"
+ number_major=$1
+ number_minor=$2
+ number_revision=$3
#
# There are really only two kinds -- those that
# use the current revision as the major version
# and those that subtract age and use age as
# a minor version. But, then there is irix
- # which has an extra 1 added just for fun
+ # that has an extra 1 added just for fun
#
case $version_type in
# correct linux to gnu/linux during the next big refactor
- darwin|linux|osf|windows|none)
+ darwin|freebsd-elf|linux|osf|windows|none)
func_arith $number_major + $number_minor
current=$func_arith_result
- age="$number_minor"
- revision="$number_revision"
+ age=$number_minor
+ revision=$number_revision
;;
- freebsd-aout|freebsd-elf|qnx|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
+ freebsd-aout|qnx|sunos)
+ current=$number_major
+ revision=$number_minor
+ age=0
;;
irix|nonstopux)
func_arith $number_major + $number_minor
current=$func_arith_result
- age="$number_minor"
- revision="$number_minor"
+ age=$number_minor
+ revision=$number_minor
lt_irix_increment=no
;;
esac
;;
no)
- current="$1"
- revision="$2"
- age="$3"
+ current=$1
+ revision=$2
+ age=$3
;;
esac
case $current in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "CURRENT \`$current' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "CURRENT '$current' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $revision in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "REVISION \`$revision' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "REVISION '$revision' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $age in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "AGE \`$age' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "AGE '$age' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
if test "$age" -gt "$current"; then
- func_error "AGE \`$age' is greater than the current interface number \`$current'"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "AGE '$age' is greater than the current interface number '$current'"
+ func_fatal_error "'$vinfo' is not valid version information"
fi
# Calculate the version variables.
# verstring for coding it into the library header
func_arith $current - $age
major=.$func_arith_result
- versuffix="$major.$age.$revision"
+ versuffix=$major.$age.$revision
# Darwin ld doesn't like 0 for these options...
func_arith $current + 1
minor_current=$func_arith_result
- xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ # On Darwin other compilers
+ case $CC in
+ nagfor*)
+ verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+ ;;
+ *)
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+ esac
;;
freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
+ major=.$current
+ versuffix=.$current.$revision
;;
freebsd-elf)
- major=".$current"
- versuffix=".$current"
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=$major.$age.$revision
;;
irix | nonstopux)
- if test "X$lt_irix_increment" = "Xno"; then
+ if test no = "$lt_irix_increment"; then
func_arith $current - $age
else
func_arith $current - $age + 1
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
esac
- verstring="$verstring_prefix$major.$revision"
+ verstring=$verstring_prefix$major.$revision
# Add in all the interfaces that we are compatible with.
loop=$revision
- while test "$loop" -ne 0; do
+ while test 0 -ne "$loop"; do
func_arith $revision - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
- verstring="$verstring_prefix$major.$iface:$verstring"
+ verstring=$verstring_prefix$major.$iface:$verstring
done
- # Before this point, $major must not contain `.'.
+ # Before this point, $major must not contain '.'.
major=.$major
- versuffix="$major.$revision"
+ versuffix=$major.$revision
;;
linux) # correct to gnu/linux during the next big refactor
func_arith $current - $age
major=.$func_arith_result
- versuffix="$major.$age.$revision"
+ versuffix=$major.$age.$revision
;;
osf)
func_arith $current - $age
major=.$func_arith_result
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
+ versuffix=.$current.$age.$revision
+ verstring=$current.$age.$revision
# Add in all the interfaces that we are compatible with.
loop=$age
- while test "$loop" -ne 0; do
+ while test 0 -ne "$loop"; do
func_arith $current - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
- verstring="$verstring:${iface}.0"
+ verstring=$verstring:$iface.0
done
# Make executables depend on our current version.
- func_append verstring ":${current}.0"
+ func_append verstring ":$current.0"
;;
qnx)
- major=".$current"
- versuffix=".$current"
+ major=.$current
+ versuffix=.$current
+ ;;
+
+ sco)
+ major=.$current
+ versuffix=.$current
;;
sunos)
- major=".$current"
- versuffix=".$current.$revision"
+ major=.$current
+ versuffix=.$current.$revision
;;
windows)
# Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
+ # extension on DOS 8.3 file systems.
func_arith $current - $age
major=$func_arith_result
- versuffix="-$major"
+ versuffix=-$major
;;
*)
- func_fatal_configuration "unknown library version type \`$version_type'"
+ func_fatal_configuration "unknown library version type '$version_type'"
;;
esac
verstring=
;;
*)
- verstring="0.0"
+ verstring=0.0
;;
esac
- if test "$need_version" = no; then
+ if test no = "$need_version"; then
versuffix=
else
- versuffix=".0.0"
+ versuffix=.0.0
fi
fi
# Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
+ if test yes,no = "$avoid_version,$need_version"; then
major=
versuffix=
- verstring=""
+ verstring=
fi
# Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- func_warning "undefined symbols not allowed in $host shared libraries"
- build_libtool_libs=no
- build_old_libs=yes
+ if test yes = "$allow_undefined"; then
+ if test unsupported = "$allow_undefined_flag"; then
+ if test yes = "$build_old_libs"; then
+ func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+ build_libtool_libs=no
+ else
+ func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+ fi
fi
else
# Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
+ allow_undefined_flag=$no_undefined_flag
fi
fi
- func_generate_dlsyms "$libname" "$libname" "yes"
+ func_generate_dlsyms "$libname" "$libname" :
func_append libobjs " $symfileobj"
- test "X$libobjs" = "X " && libobjs=
+ test " " = "$libobjs" && libobjs=
- if test "$opt_mode" != relink; then
+ if test relink != "$opt_mode"; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
case $p in
*.$objext | *.gcno)
;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+ if test -n "$precious_files_regex"; then
if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
then
continue
fi
# Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
func_append oldlibs " $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
- oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
*) func_append finalize_rpath " $libdir" ;;
esac
done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
dependency_libs="$temp_xrpath $dependency_libs"
fi
fi
# Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
+ old_dlfiles=$dlfiles
dlfiles=
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
done
# Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
+ old_dlprefiles=$dlprefiles
dlprefiles=
for lib in $old_dlprefiles; do
case "$dlprefiles " in
esac
done
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
if test -n "$rpath"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
;;
*)
# Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
+ if test yes = "$build_libtool_need_lc"; then
func_append deplibs " -lc"
fi
;;
# I'm not sure if I'm treating the release correctly. I think
# release should show up in the -l (ie -lgmp5) so we don't want to
# add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
+ release=
+ versuffix=
+ major=
newdeplibs=
droppeddeps=no
case $deplibs_check_method in
-l*)
func_stripname -l '' "$i"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $i "*)
func_append newdeplibs " $i"
- i=""
+ i=
;;
esac
fi
- if test -n "$i" ; then
+ if test -n "$i"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
func_append newdeplibs " $i"
else
droppeddeps=yes
$opt_dry_run || $RM conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $i "*)
func_append newdeplibs " $i"
- i=""
+ i=
;;
esac
fi
- if test -n "$i" ; then
+ if test -n "$i"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
func_append newdeplibs " $i"
else
droppeddeps=yes
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
;;
esac
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
if test -n "$file_magic_glob"; then
libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
else
libnameglob=$libname
fi
- test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- if test "$want_nocaseglob" = yes; then
+ if test yes = "$want_nocaseglob"; then
shopt -s nocaseglob
potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
$nocaseglob
# We might still enter an endless loop, since a link
# loop can be closed while we follow links,
# but so what?
- potlib="$potent_lib"
+ potlib=$potent_lib
while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+ *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
$SED -e 10q |
$EGREP "$file_magic_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
break 2
fi
done
done
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
+ if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for file magic test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
;;
esac
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
+ potlib=$potent_lib # see symlink-check above in file_magic test
if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
$EGREP "$match_pattern_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
break 2
fi
done
done
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
+ if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
done # Gone through all deplibs.
;;
none | unknown | *)
- newdeplibs=""
+ newdeplibs=
tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ for i in $predeps $postdeps; do
# can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
done
fi
case $tmp_deplibs in
*[!\ \ ]*)
echo
- if test "X$deplibs_check_method" = "Xnone"; then
+ if test none = "$deplibs_check_method"; then
echo "*** Warning: inter-library dependencies are not supported in this platform."
else
echo "*** Warning: inter-library dependencies are not known to be supported."
;;
esac
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
+ if test yes = "$droppeddeps"; then
+ if test yes = "$module"; then
echo
echo "*** Warning: libtool could not satisfy all declared inter-library"
$ECHO "*** dependencies of module $libname. Therefore, libtool will create"
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
echo "*** automatically added whenever a program is linked with this library"
echo "*** or is declared to -dlopen it."
- if test "$allow_undefined" = no; then
+ if test no = "$allow_undefined"; then
echo
echo "*** Since this library must not contain undefined symbols,"
echo "*** because either the platform does not support them or"
echo "*** it was explicitly requested with -no-undefined,"
echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
*) func_append new_libs " $deplib" ;;
esac
done
- deplibs="$new_libs"
+ deplibs=$new_libs
# All the library-specific variables (install_libdir is set above).
library_names=
dlname=
# Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- # Remove ${wl} instances when linking with ld.
+ if test yes = "$build_libtool_libs"; then
+ # Remove $wl instances when linking with ld.
# FIXME: should test the right _cmds variable.
case $archive_cmds in
*\$LD\ *) wl= ;;
esac
- if test "$hardcode_into_libs" = yes; then
+ if test yes = "$hardcode_into_libs"; then
# Hardcode the library paths
hardcode_libdirs=
dep_rpath=
- rpath="$finalize_rpath"
- test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ rpath=$finalize_rpath
+ test relink = "$opt_mode" || rpath=$compile_rpath$rpath
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
func_replace_sysroot "$libdir"
libdir=$func_replace_sysroot_result
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
fi
if test -n "$runpath_var" && test -n "$perm_rpath"; then
test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
fi
- shlibpath="$finalize_shlibpath"
- test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ shlibpath=$finalize_shlibpath
+ test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
eval library_names=\"$library_names_spec\"
set dummy $library_names
shift
- realname="$1"
+ realname=$1
shift
if test -n "$soname_spec"; then
eval soname=\"$soname_spec\"
else
- soname="$realname"
+ soname=$realname
fi
if test -z "$dlname"; then
dlname=$soname
fi
- lib="$output_objdir/$realname"
+ lib=$output_objdir/$realname
linknames=
for link
do
delfiles=
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
- export_symbols="$output_objdir/$libname.uexp"
+ export_symbols=$output_objdir/$libname.uexp
func_append delfiles " $export_symbols"
fi
cygwin* | mingw* | cegcc*)
if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
# exporting using user supplied symfile
- if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ func_dll_def_p "$export_symbols" || {
# and it's NOT already a .def file. Must figure out
# which of the given symbols are data symbols and tag
# them as such. So, trigger use of export_symbols_cmds.
# export_symbols gets reassigned inside the "prepare
# the list of exported symbols" if statement, so the
# include_expsyms logic still works.
- orig_export_symbols="$export_symbols"
+ orig_export_symbols=$export_symbols
export_symbols=
always_export_symbols=yes
- fi
+ }
fi
;;
esac
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
+ if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd1 in $cmds; do
- IFS="$save_ifs"
+ IFS=$save_ifs
# Take the normal branch if the nm_file_list_spec branch
# doesn't work or if tool conversion is not needed.
case $nm_file_list_spec~$to_tool_file_cmd in
try_normal_branch=no
;;
esac
- if test "$try_normal_branch" = yes \
+ if test yes = "$try_normal_branch" \
&& { test "$len" -lt "$max_cmd_len" \
|| test "$max_cmd_len" -le -1; }
then
output_la=$func_basename_result
save_libobjs=$libobjs
save_output=$output
- output=${output_objdir}/${output_la}.nm
+ output=$output_objdir/$output_la.nm
func_to_tool_file "$output"
libobjs=$nm_file_list_spec$func_to_tool_file_result
func_append delfiles " $output"
break
fi
done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ IFS=$save_ifs
+ if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
fi
fi
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
- if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
+ # 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
;;
esac
done
- deplibs="$tmp_deplibs"
+ deplibs=$tmp_deplibs
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec" &&
- test "$compiler_needs_object" = yes &&
+ test yes = "$compiler_needs_object" &&
test -z "$libobjs"; then
# extract the archives, so we have objects to list.
# TODO: could optimize this to just extract one archive.
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
test "X$libobjs" = "X " && libobjs=
else
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
fi
fi
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
func_append linker_flags " $flag"
fi
# Make a backup of the uninstalled library when relinking
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
fi
# Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
+ if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
eval test_cmds=\"$module_expsym_cmds\"
cmds=$module_expsym_cmds
fi
fi
- if test "X$skipped_export" != "X:" &&
+ if test : != "$skipped_export" &&
func_len " $test_cmds" &&
len=$func_len_result &&
test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
last_robj=
k=1
- if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
- output=${output_objdir}/${output_la}.lnkscript
+ if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+ output=$output_objdir/$output_la.lnkscript
func_verbose "creating GNU ld script: $output"
echo 'INPUT (' > $output
for obj in $save_libobjs
func_append delfiles " $output"
func_to_tool_file "$output"
output=$func_to_tool_file_result
- elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
- output=${output_objdir}/${output_la}.lnk
+ elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+ output=$output_objdir/$output_la.lnk
func_verbose "creating linker input file list: $output"
: > $output
set x $save_libobjs
shift
firstobj=
- if test "$compiler_needs_object" = yes; then
+ if test yes = "$compiler_needs_object"; then
firstobj="$1 "
shift
fi
else
if test -n "$save_libobjs"; then
func_verbose "creating reloadable object files..."
- output=$output_objdir/$output_la-${k}.$objext
+ output=$output_objdir/$output_la-$k.$objext
eval test_cmds=\"$reload_cmds\"
func_len " $test_cmds"
len0=$func_len_result
func_len " $obj"
func_arith $len + $func_len_result
len=$func_arith_result
- if test "X$objlist" = X ||
+ if test -z "$objlist" ||
test "$len" -lt "$max_cmd_len"; then
func_append objlist " $obj"
else
# The command $test_cmds is almost too long, add a
# command to the queue.
- if test "$k" -eq 1 ; then
+ if test 1 -eq "$k"; then
# The first file doesn't have a previous command to add.
reload_objs=$objlist
eval concat_cmds=\"$reload_cmds\"
reload_objs="$objlist $last_robj"
eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
fi
- last_robj=$output_objdir/$output_la-${k}.$objext
+ last_robj=$output_objdir/$output_la-$k.$objext
func_arith $k + 1
k=$func_arith_result
- output=$output_objdir/$output_la-${k}.$objext
+ output=$output_objdir/$output_la-$k.$objext
objlist=" $obj"
func_len " $last_robj"
func_arith $len0 + $func_len_result
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
reload_objs="$objlist $last_robj"
- eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ eval concat_cmds=\"\$concat_cmds$reload_cmds\"
if test -n "$last_robj"; then
- eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
func_append delfiles " $output"
output=
fi
- if ${skipped_export-false}; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
+ ${skipped_export-false} && {
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
libobjs=$output
# Append the command to create the export file.
if test -n "$last_robj"; then
eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
- fi
+ }
test -n "$save_libobjs" &&
func_verbose "creating a temporary reloadable object file: $output"
# Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $opt_silent || {
+ IFS=$save_ifs
+ $opt_quiet || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
exit $lt_exit
}
done
- IFS="$save_ifs"
+ IFS=$save_ifs
if test -n "$export_symbols_regex" && ${skipped_export-false}; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
fi
fi
- if ${skipped_export-false}; then
+ ${skipped_export-false} && {
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
if test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
+ # 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
- fi
+ }
libobjs=$output
# Restore the value of output.
# value of $libobjs for piecewise linking.
# Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
+ if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
cmds=$module_expsym_cmds
else
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
test "X$libobjs" = "X " && libobjs=
fi
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd in $cmds; do
- IFS="$save_ifs"
+ IFS=$sp$nl
eval cmd=\"$cmd\"
- $opt_silent || {
+ IFS=$save_ifs
+ $opt_quiet || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
exit $lt_exit
}
done
- IFS="$save_ifs"
+ IFS=$save_ifs
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
if test -n "$convenience"; then
done
# If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
+ if test yes = "$module" || test yes = "$export_dynamic"; then
# On all known operating systems, these are identical.
- dlname="$soname"
+ dlname=$soname
fi
fi
;;
obj)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for objects"
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for objects"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ func_warning "'-l' and '-L' are ignored for objects" ;;
esac
test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for objects"
+ func_warning "'-rpath' is ignored for objects"
test -n "$xrpath" && \
- func_warning "\`-R' is ignored for objects"
+ func_warning "'-R' is ignored for objects"
test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for objects"
+ func_warning "'-version-info' is ignored for objects"
test -n "$release" && \
- func_warning "\`-release' is ignored for objects"
+ func_warning "'-release' is ignored for objects"
case $output in
*.lo)
test -n "$objs$old_deplibs" && \
- func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+ func_fatal_error "cannot build library object '$output' from non-libtool objects"
libobj=$output
func_lo2o "$libobj"
;;
*)
libobj=
- obj="$output"
+ obj=$output
;;
esac
# the extraction.
reload_conv_objs=
gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
- wl=
-
+ # if reload_cmds runs $LD directly, get rid of -Wl from
+ # whole_archive_flag_spec and hope we can get by with turning comma
+ # into space.
+ case $reload_cmds in
+ *\$LD[\ \$]*) wl= ;;
+ esac
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
else
- gentop="$output_objdir/${obj}x"
+ gentop=$output_objdir/${obj}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
fi
# If we're not building shared, we need to use non_pic_objs
- test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+ test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
# Create the old-style object.
- reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
- output="$obj"
+ output=$obj
func_execute_cmds "$reload_cmds" 'exit $?'
# Exit if we aren't doing a library object file.
exit $EXIT_SUCCESS
fi
- if test "$build_libtool_libs" != yes; then
+ test yes = "$build_libtool_libs" || {
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
# $show "echo timestamp > $libobj"
# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
exit $EXIT_SUCCESS
- fi
+ }
- if test -n "$pic_flag" || test "$pic_mode" != default; then
+ if test -n "$pic_flag" || test default != "$pic_mode"; then
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
+ output=$libobj
func_execute_cmds "$reload_cmds" 'exit $?'
fi
output=$func_stripname_result.exe;;
esac
test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for programs"
+ func_warning "'-version-info' is ignored for programs"
test -n "$release" && \
- func_warning "\`-release' is ignored for programs"
+ func_warning "'-release' is ignored for programs"
- test "$preload" = yes \
- && test "$dlopen_support" = unknown \
- && test "$dlopen_self" = unknown \
- && test "$dlopen_self_static" = unknown && \
- func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+ $preload \
+ && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+ && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
*-*-darwin*)
# Don't allow lazy linking, it breaks C++ global constructors
# But is supposedly fixed on 10.4 or later (yay!).
- if test "$tagname" = CXX ; then
+ if test CXX = "$tagname"; then
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[0123])
- func_append compile_command " ${wl}-bind_at_load"
- func_append finalize_command " ${wl}-bind_at_load"
+ func_append compile_command " $wl-bind_at_load"
+ func_append finalize_command " $wl-bind_at_load"
;;
esac
fi
*) func_append new_libs " $deplib" ;;
esac
done
- compile_deplibs="$new_libs"
+ compile_deplibs=$new_libs
func_append compile_command " $compile_deplibs"
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
fi
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
::) dllsearchpath=$libdir;;
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
- compile_rpath="$rpath"
+ compile_rpath=$rpath
rpath=
hardcode_libdirs=
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
- finalize_rpath="$rpath"
+ finalize_rpath=$rpath
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ if test -n "$libobjs" && test yes = "$build_old_libs"; then
# Transform all the library objects into standard objects.
compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
fi
- func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+ func_generate_dlsyms "$outputname" "@PROGRAM@" false
# template prelinking step
if test -n "$prelink_cmds"; then
func_execute_cmds "$prelink_cmds" 'exit $?'
fi
- wrappers_required=yes
+ wrappers_required=:
case $host in
*cegcc* | *mingw32ce*)
# Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
- wrappers_required=no
+ wrappers_required=false
;;
*cygwin* | *mingw* )
- if test "$build_libtool_libs" != yes; then
- wrappers_required=no
- fi
+ test yes = "$build_libtool_libs" || wrappers_required=false
;;
*)
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- wrappers_required=no
+ if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+ wrappers_required=false
fi
;;
esac
- if test "$wrappers_required" = no; then
+ $wrappers_required || {
# Replace the output file specification.
compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
+ link_command=$compile_command$compile_rpath
# We have no uninstalled library dependencies, so finalize right now.
exit_status=0
fi
# Delete the generated files.
- if test -f "$output_objdir/${outputname}S.${objext}"; then
- func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ if test -f "$output_objdir/${outputname}S.$objext"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
fi
exit $exit_status
- fi
+ }
if test -n "$compile_shlibpath$finalize_shlibpath"; then
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
fi
fi
- if test "$no_install" = yes; then
+ if test yes = "$no_install"; then
# We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
+ link_command=$compile_var$compile_command$compile_rpath
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
exit $EXIT_SUCCESS
fi
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
+ case $hardcode_action,$fast_install in
+ relink,*)
+ # Fast installation is not supported
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
- func_warning "this platform does not like uninstalled shared libraries"
- func_warning "\`$output' will be relinked during installation"
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "'$output' will be relinked during installation"
+ ;;
+ *,yes)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ ;;
+ *,no)
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
+ ;;
+ *,needless)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=
+ ;;
+ esac
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
func_dirname_and_basename "$output" "" "."
output_name=$func_basename_result
output_path=$func_dirname_result
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
+ cwrappersource=$output_path/$objdir/lt-$output_name.c
+ cwrapper=$output_path/$output_name.exe
$RM $cwrappersource $cwrapper
trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
$opt_dry_run || {
# note: this script will not be executed, so do not chmod.
- if test "x$build" = "x$host" ; then
+ if test "x$build" = "x$host"; then
$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
else
func_emit_wrapper no > $func_ltwrapper_scriptname_result
# See if we need to build an old-fashioned archive.
for oldlib in $oldlibs; do
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save $symfileobj"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
+ case $build_libtool_libs in
+ convenience)
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs=$convenience
build_libtool_libs=no
- else
+ ;;
+ module)
+ oldobjs=$libobjs_save
+ addlibs=$old_convenience
+ build_libtool_libs=no
+ ;;
+ *)
oldobjs="$old_deplibs $non_pic_objects"
- if test "$preload" = yes && test -f "$symfileobj"; then
- func_append oldobjs " $symfileobj"
- fi
- fi
- addlibs="$old_convenience"
- fi
+ $preload && test -f "$symfileobj" \
+ && func_append oldobjs " $symfileobj"
+ addlibs=$old_convenience
+ ;;
+ esac
if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $addlibs
fi
# Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
cmds=$old_archive_from_new_cmds
else
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
:
else
echo "copying selected object files to avoid basename conflicts..."
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
for obj in $save_oldobjs
do
func_basename "$obj"
- objbase="$func_basename_result"
+ objbase=$func_basename_result
case " $oldobjs " in
" ") oldobjs=$obj ;;
*[\ /]"$objbase "*)
else
# the above command should be used before it gets too long
oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
+ if test "$obj" = "$last_oldobj"; then
RANLIB=$save_RANLIB
fi
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
objlist=
len=$len0
fi
done
RANLIB=$save_RANLIB
oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
+ if test -z "$oldobjs"; then
eval cmds=\"\$concat_cmds\"
else
eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
case $output in
*.la)
old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
+ test yes = "$build_old_libs" && old_library=$libname.$libext
func_verbose "creating $output"
# Preserve any variables that may affect compiler behavior
fi
done
# Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
- if test "$hardcode_automatic" = yes ; then
+ if test yes = "$hardcode_automatic"; then
relink_command=
fi
# Only create the output if not a dry run.
$opt_dry_run || {
for installed in no yes; do
- if test "$installed" = yes; then
+ if test yes = "$installed"; then
if test -z "$install_libdir"; then
break
fi
- output="$output_objdir/$outputname"i
+ output=$output_objdir/${outputname}i
# Replace all uninstalled libtool libraries with the installed ones
newdependency_libs=
for deplib in $dependency_libs; do
case $deplib in
*.la)
func_basename "$deplib"
- name="$func_basename_result"
+ name=$func_basename_result
func_resolve_sysroot "$deplib"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_fatal_error "'$deplib' is not a valid libtool archive"
func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
;;
-L*)
*) func_append newdependency_libs " $deplib" ;;
esac
done
- dependency_libs="$newdependency_libs"
+ dependency_libs=$newdependency_libs
newdlfiles=
for lib in $dlfiles; do
case $lib in
*.la)
func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
;;
*) func_append newdlfiles " $lib" ;;
esac
done
- dlfiles="$newdlfiles"
+ dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
# didn't already link the preopened objects directly into
# the library:
func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
;;
esac
done
- dlprefiles="$newdlprefiles"
+ dlprefiles=$newdlprefiles
else
newdlfiles=
for lib in $dlfiles; do
case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlfiles " $abs"
done
- dlfiles="$newdlfiles"
+ dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlprefiles " $abs"
done
- dlprefiles="$newdlprefiles"
+ dlprefiles=$newdlprefiles
fi
$RM $output
# place dlname in correct position for cygwin
case $host,$output,$installed,$module,$dlname in
*cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
# If a -bindir argument was supplied, place the dll there.
- if test "x$bindir" != x ;
- then
+ if test -n "$bindir"; then
func_relative_path "$install_libdir" "$bindir"
- tdlname=$func_relative_path_result$dlname
+ tdlname=$func_relative_path_result/$dlname
else
# Otherwise fall back on heuristic.
tdlname=../bin/$dlname
esac
$ECHO > $output "\
# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
# The name of the static archive.
old_library='$old_library'
-# Linker flags that can not go in dependency_libs.
+# Linker flags that cannot go in dependency_libs.
inherited_linker_flags='$new_inherited_linker_flags'
# Libraries that this one depends upon.
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
+ if test no,yes = "$installed,$need_relink"; then
$ECHO >> $output "\
relink_command=\"$relink_command\""
fi
exit $EXIT_SUCCESS
}
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
- func_mode_link ${1+"$@"}
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+ func_mode_link ${1+"$@"}
+fi
# func_mode_uninstall arg...
func_mode_uninstall ()
{
- $opt_debug
- RM="$nonopt"
+ $debug_cmd
+
+ RM=$nonopt
files=
- rmforce=
+ rmforce=false
exit_status=0
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
- libtool_install_magic="$magic"
+ libtool_install_magic=$magic
for arg
do
case $arg in
- -f) func_append RM " $arg"; rmforce=yes ;;
+ -f) func_append RM " $arg"; rmforce=: ;;
-*) func_append RM " $arg" ;;
*) func_append files " $arg" ;;
esac
for file in $files; do
func_dirname "$file" "" "."
- dir="$func_dirname_result"
- if test "X$dir" = X.; then
- odir="$objdir"
+ dir=$func_dirname_result
+ if test . = "$dir"; then
+ odir=$objdir
else
- odir="$dir/$objdir"
+ odir=$dir/$objdir
fi
func_basename "$file"
- name="$func_basename_result"
- test "$opt_mode" = uninstall && odir="$dir"
+ name=$func_basename_result
+ test uninstall = "$opt_mode" && odir=$dir
# Remember odir for removal later, being careful to avoid duplicates
- if test "$opt_mode" = clean; then
+ if test clean = "$opt_mode"; then
case " $rmdirs " in
*" $odir "*) ;;
*) func_append rmdirs " $odir" ;;
elif test -d "$file"; then
exit_status=1
continue
- elif test "$rmforce" = yes; then
+ elif $rmforce; then
continue
fi
- rmfiles="$file"
+ rmfiles=$file
case $name in
*.la)
done
test -n "$old_library" && func_append rmfiles " $odir/$old_library"
- case "$opt_mode" in
+ case $opt_mode in
clean)
case " $library_names " in
*" $dlname "*) ;;
uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
- func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
fi
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
- func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
fi
# FIXME: should reinstall the best remaining shared library.
;;
func_source $dir/$name
# Add PIC object to the list of files to remove.
- if test -n "$pic_object" &&
- test "$pic_object" != none; then
+ if test -n "$pic_object" && test none != "$pic_object"; then
func_append rmfiles " $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" &&
- test "$non_pic_object" != none; then
+ if test -n "$non_pic_object" && test none != "$non_pic_object"; then
func_append rmfiles " $dir/$non_pic_object"
fi
fi
;;
*)
- if test "$opt_mode" = clean ; then
+ if test clean = "$opt_mode"; then
noexename=$name
case $file in
*.exe)
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
- func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+ if test yes = "$fast_install" && test -n "$relink_command"; then
func_append rmfiles " $odir/lt-$name"
fi
- if test "X$noexename" != "X$name" ; then
- func_append rmfiles " $odir/lt-${noexename}.c"
+ if test "X$noexename" != "X$name"; then
+ func_append rmfiles " $odir/lt-$noexename.c"
fi
fi
fi
func_show_eval "$RM $rmfiles" 'exit_status=1'
done
- # Try to remove the ${objdir}s in the directories where we deleted files
+ # Try to remove the $objdir's in the directories where we deleted files
for dir in $rmdirs; do
if test -d "$dir"; then
func_show_eval "rmdir $dir >/dev/null 2>&1"
exit $exit_status
}
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
- func_mode_uninstall ${1+"$@"}
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+ func_mode_uninstall ${1+"$@"}
+fi
test -z "$opt_mode" && {
- help="$generic_help"
+ help=$generic_help
func_fatal_help "you must specify a MODE"
}
test -z "$exec_cmd" && \
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode '$opt_mode'"
if test -n "$exec_cmd"; then
eval exec "$exec_cmd"
# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
+# where we disable both kinds of libraries. Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
# mode:shell-script
# sh-indentation:2
# End:
-# vi:sw=2
-
projects / cycript.git / blobdiff