calls its self */
if (List->IsFlag(Pkg,pkgOrderList::Configured)) continue;
- if (ConfigurePkgs == true && SmartConfigure(Pkg) == false) {
+ if (ConfigurePkgs == true && SmartConfigure(Pkg, 0) == false) {
if (ImmConfigureAll)
_error->Error(_("Could not perform immediate configuration on '%s'. "
"Please see man 5 apt.conf under APT::Immediate-Configure for details. (%d)"),Pkg.Name(),1);
a error will only be reported if ConfigureAll fails. This is why some of the
messages this function reports on failure (return false;) as just warnings
only shown when debuging*/
-bool pkgPackageManager::SmartConfigure(PkgIterator Pkg)
+bool pkgPackageManager::SmartConfigure(PkgIterator Pkg, int const Depth)
{
+ // If this is true, only check and correct and dependancies without the Loop flag
+ bool PkgLoop = List->IsFlag(Pkg,pkgOrderList::Loop);
+
if (Debug) {
VerIterator InstallVer = VerIterator(Cache,Cache[Pkg].InstallVer);
- clog << "SmartConfigure " << Pkg.Name() << " " << InstallVer.VerStr() << endl;
+ clog << OutputInDepth(Depth) << "SmartConfigure " << Pkg.Name() << " (" << InstallVer.VerStr() << ")";
+ if (PkgLoop)
+ clog << " (Only Correct Dependancies)";
+ clog << endl;
}
- // If this is true, only check and correct and dependancies without the Loop flag
- bool PkgLoop = List->IsFlag(Pkg,pkgOrderList::Loop);
-
VerIterator const instVer = Cache[Pkg].InstVerIter(Cache);
/* Because of the ordered list, most dependancies should be unpacked,
just hop between them if this is not checked */
List->Flag(Pkg,pkgOrderList::Loop);
// If SmartConfigure was succesfull, Bad is false, so break
- Bad = !SmartConfigure(DepPkg);
+ Bad = !SmartConfigure(DepPkg, Depth + 1);
List->RmFlag(Pkg,pkgOrderList::Loop);
if (!Bad) break;
} else if (List->IsFlag(DepPkg,pkgOrderList::Configured)) {
if (List->IsNow(DepPkg) && !List->IsFlag(DepPkg,pkgOrderList::Loop)) {
List->Flag(Pkg,pkgOrderList::Loop);
if (Debug)
- cout << " Unpacking " << DepPkg.Name() << " to avoid loop" << endl;
- SmartUnPack(DepPkg, true);
+ cout << OutputInDepth(Depth) << "Unpacking " << DepPkg.Name() << " to avoid loop" << endl;
+ SmartUnPack(DepPkg, true, Depth + 1);
List->RmFlag(Pkg,pkgOrderList::Loop);
}
}
Cache[P].InstallVer == 0 || (P.CurrentVer() == Cache[P].InstallVer &&
(Cache[Pkg].iFlags & pkgDepCache::ReInstall) != pkgDepCache::ReInstall))
continue;
- SmartConfigure(P);
+ SmartConfigure(P, (Depth +1));
}
// Sanity Check
unpacked, or when it has been unpacked, if Immediate==true it configures it. */
bool pkgPackageManager::SmartUnPack(PkgIterator Pkg)
{
- return SmartUnPack(Pkg, true);
+ return SmartUnPack(Pkg, true, 0);
}
-bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate)
+bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate, int const Depth)
{
+ bool PkgLoop = List->IsFlag(Pkg,pkgOrderList::Loop);
+
if (Debug) {
- clog << "SmartUnPack " << Pkg.Name();
+ clog << OutputInDepth(Depth) << "SmartUnPack " << Pkg.Name();
VerIterator InstallVer = VerIterator(Cache,Cache[Pkg].InstallVer);
if (Pkg.CurrentVer() == 0)
- cout << " (install version " << InstallVer.VerStr() << ")" << endl;
+ cout << " (install version " << InstallVer.VerStr() << ")";
else
- cout << " (replace version " << Pkg.CurrentVer().VerStr() << " with " << InstallVer.VerStr() << ")" << endl;
+ cout << " (replace version " << Pkg.CurrentVer().VerStr() << " with " << InstallVer.VerStr() << ")";
+ if (PkgLoop)
+ cout << " (Only Perform PreUnpack Checks)";
+ cout << endl;
}
// Check if it is already unpacked
if (Pkg.State() == pkgCache::PkgIterator::NeedsConfigure &&
Cache[Pkg].Keep() == true)
{
- cout << "SmartUnPack called on Package " << Pkg.Name() << " but its unpacked" << endl;
+ cout << OutputInDepth(Depth) << "SmartUnPack called on Package " << Pkg.Name() << " but its unpacked" << endl;
return false;
}
- bool PkgLoop = List->IsFlag(Pkg,pkgOrderList::Loop);
-
VerIterator const instVer = Cache[Pkg].InstVerIter(Cache);
/* PreUnpack Checks: This loop checks and attempts to rectify and problems that would prevent the package being unpacked.
while (End->Type == pkgCache::Dep::PreDepends)
{
if (Debug)
- clog << "PreDepends order for " << Pkg.Name() << std::endl;
+ clog << OutputInDepth(Depth) << "PreDepends order for " << Pkg.Name() << std::endl;
// Look for possible ok targets.
SPtrArray<Version *> VList = Start.AllTargets();
{
Bad = false;
if (Debug)
- clog << "Found ok package " << Pkg.Name() << endl;
+ clog << OutputInDepth(Depth) << "Found ok package " << Pkg.Name() << endl;
continue;
}
}
}
if (Debug)
- clog << "Trying to SmartConfigure " << Pkg.Name() << endl;
- Bad = !SmartConfigure(Pkg);
+ clog << OutputInDepth(Depth) << "Trying to SmartConfigure " << Pkg.Name() << endl;
+ Bad = !SmartConfigure(Pkg, Depth + 1);
}
/* If this or element did not match then continue on to the
// See if the current version is conflicting
if (ConflictPkg.CurrentVer() == Ver && List->IsNow(ConflictPkg))
{
- cout << Pkg.Name() << " conflicts with " << ConflictPkg.Name() << endl;
+ cout << OutputInDepth(Depth) << Pkg.Name() << " conflicts with " << ConflictPkg.Name() << endl;
/* If a loop is not present or has not yet been detected, attempt to unpack packages
to resolve this conflict. If there is a loop present, remove packages to resolve this conflict */
if (!List->IsFlag(ConflictPkg,pkgOrderList::Loop)) {
if (Cache[ConflictPkg].Keep() == 0 && Cache[ConflictPkg].InstallVer != 0) {
if (Debug)
- cout << "Unpacking " << ConflictPkg.Name() << " to prevent conflict" << endl;
+ cout << OutputInDepth(Depth) << OutputInDepth(Depth) << "Unpacking " << ConflictPkg.Name() << " to prevent conflict" << endl;
List->Flag(Pkg,pkgOrderList::Loop);
- SmartUnPack(ConflictPkg,false);
+ SmartUnPack(ConflictPkg,false, Depth + 1);
// Remove loop to allow it to be used later if needed
List->RmFlag(Pkg,pkgOrderList::Loop);
} else {
} else {
if (!List->IsFlag(ConflictPkg,pkgOrderList::Removed)) {
if (Debug)
- cout << "Because of conficts knot, removing " << ConflictPkg.Name() << " to conflict violation" << endl;
+ cout << OutputInDepth(Depth) << "Because of conficts knot, removing " << ConflictPkg.Name() << " to conflict violation" << endl;
if (EarlyRemove(ConflictPkg) == false)
return _error->Error("Internal Error, Could not early remove %s",ConflictPkg.Name());
}
List->Flag(Pkg,pkgOrderList::Loop);
// Found a break, so unpack the package
if (Debug)
- cout << " Unpacking " << BrokenPkg.Name() << " to avoid break" << endl;
+ cout << OutputInDepth(Depth) << " Unpacking " << BrokenPkg.Name() << " to avoid break" << endl;
- SmartUnPack(BrokenPkg, false);
+ SmartUnPack(BrokenPkg, false, Depth + 1);
List->RmFlag(Pkg,pkgOrderList::Loop);
}
// Check if a package needs to be removed
if (Cache[BrokenPkg].Delete() == true && !List->IsFlag(BrokenPkg,pkgOrderList::Configured)) {
if (Debug)
- cout << " Removing " << BrokenPkg.Name() << " to avoid break" << endl;
+ cout << OutputInDepth(Depth) << " Removing " << BrokenPkg.Name() << " to avoid break" << endl;
SmartRemove(BrokenPkg);
}
}
Cache[P].InstallVer == 0 || (P.CurrentVer() == Cache[P].InstallVer &&
(Cache[Pkg].iFlags & pkgDepCache::ReInstall) != pkgDepCache::ReInstall))
continue;
- SmartUnPack(P, false);
+ SmartUnPack(P, false, Depth + 1);
}
if(Install(Pkg,FileNames[Pkg->ID]) == false)
return false;
- if (Immediate == true && List->IsFlag(Pkg,pkgOrderList::Immediate) == true) {
-
+ if (Immediate == true) {
// Perform immedate configuration of the package.
- if (SmartConfigure(Pkg) == false)
+ if (SmartConfigure(Pkg, Depth + 1) == false)
_error->Warning(_("Could not perform immediate configuration on '%s'. "
"Please see man 5 apt.conf under APT::Immediate-Configure for details. (%d)"),Pkg.Name(),2);
}
if (List->IsNow(Pkg) == false)
{
if (!List->IsFlag(Pkg,pkgOrderList::Configured) && !NoImmConfigure) {
- if (SmartConfigure(Pkg) == false && Debug)
+ if (SmartConfigure(Pkg, 0) == false && Debug)
_error->Warning("Internal Error, Could not configure %s",Pkg.Name());
// FIXME: The above warning message might need changing
} else {
return Failed;
}
else
- if (SmartUnPack(Pkg) == false)
+ if (SmartUnPack(Pkg,List->IsFlag(Pkg,pkgOrderList::Immediate),0) == false)
return Failed;
DoneSomething = true;