all have the same name and are therefore out of interest for pkgnames.
-Caused by the paragraph "Dependencies involving Architecture: all packages"
-in the MultiArch spec we have a second major conceptional change
-which could even break existing applications, but we hope for the best…
-An Architecture: all package is internally split into pseudo packages
-for all MultiArch Architectures and additional a package with the
-architecture "all" with no dependencies which is a dependency of all
-these architecture depending packages. While the architecture depending
-packages are mainly used for dependency resolution (a package of arch A which
-depends on an arch all package assumes that the dependencies of this package
-are also from arch A. Packages also sometimes change from any to all or v.v.)
-the arch "all" package is used for scheduling download/installation of the
-underlying "real" package. Note that the architecture depending packages can
-be detected with Pseudo() while the "all" package reports exactly this arch
-as package architecture and as pseudo architecture of the versions of this pkg.
-Beware: All versions of a "real" architecture all package will be report "all"
-as their architecture if asked with Arch() regardless if they are the "all" or
-the architecture depending packages. If you want to know the architecture this
-pseudo package was created for call Arch(true). Also, while the spec say that
-arch:all packages are not allowed to have a MultiArch flag APT assigns a
-special value to them: MultiArch: all.
-
-
-As you might guess this arch:all handling has a few problems (but we think so
-far that the problems are minor compared to the problems we would have with
-other implementations.)
-APT doesn't know which pseudo packages of such an arch all package are
-"installed" (to satisfy dependencies), so APT will generate a Cache in which
-all these pseudo packages are installed (e.g. apt-cache policy will display
-them all as installed). Later in the DepCache step it will "remove"
-all pseudo packages whose dependencies are not satisfied.
-The expense is that if the package state is broken APT could come to the
-conclusion to "remove" too many pseudo packages, but in a stable environment
-APT should never end up in a broken system state…
-
-
Given all these internal changes it is quite interesting that the actual
implementation of MultiArch is trivial: Some implicit dependencies and a few
more provides are all changes needed to get it working. Especially noteworthy
is that it wasn't needed to change the resolver in any way and other parts only
-need to be told about ignoring pseudo packages or using GrpIterator instead of
-PkgIterator, so chances are good that libapt-applications will proceed to work
-without or at least only require minor changes, but your mileage may vary…
+need to be told about using GrpIterator instead of PkgIterator, so chances are
+good that libapt-applications will proceed to work without or at least only
+require minor changes, but your mileage may vary…
Known Issues and/or noteworthy stuff:
* The implementation is mostly untested, so it is very likely that APT will
eat your kids if you aren't as lucky as the author of these patches.
-* the (install)size of a pseudo package is always NULL - if you want to know
- the (install)size you need to get the info from the arch "all" package.
-* It is maybe confusing, but the arch "all" package does have the same versions
- and in general roughly the same information with one subtil difference:
- It doesn't have any dependency, regardless of the type. The pseudo packages
- depend on this package.
-* apt-cache policy foobar on installed architecture all package foobar will
- report all architecture depending packages as installed. Displaying here the
- correct information would require to build the complete DepCache…
-* [BUG] An installed package which changes the architecture from any to all
- (and v.v.) shows up in the NEW packages section instead of UPGRADE.
-* [TODO] Investigate the DepCache pseudo-package killer heuristic:
- e.g. add more safety guards…
-* [FIXME] a few corner cases/missing features marked as FIXME in the code
-
[0] https://wiki.ubuntu.com/MultiarchSpec
Describe(Pkg,cout,true,true);
Sim.MarkInstall(Pkg,false);
- if (strcmp(Pkg.Arch(),"all") == 0)
- {
- pkgCache::GrpIterator G = Pkg.Group();
- pkgCache::GrpIterator iG = iPkg.Group();
- for (pkgCache::PkgIterator P = G.FindPkg("any"); P.end() != true; P = G.NextPkg(P))
- {
- if (strcmp(P.Arch(), "all") == 0)
- continue;
- if (iG.FindPkg(P.Arch())->CurrentVer == 0)
- continue;
- Flags[P->ID] = 1;
- Sim.MarkInstall(P, false);
- }
- }
-
// Look for broken conflicts+predepends.
for (PkgIterator I = Sim.PkgBegin(); I.end() == false; I++)
{
Flags[Pkg->ID] = 2;
- if (strcmp(Pkg.Arch(),"all") == 0)
- {
- pkgCache::GrpIterator G = Pkg.Group();
- for (pkgCache::PkgIterator P = G.FindPkg("any"); P.end() != true; P = G.NextPkg(P))
- {
- if (strcmp(P.Arch(), "all") == 0)
- continue;
- if (Flags[P->ID] == 1)
- Flags[P->ID] = 2;
- }
- }
-
- if (Sim[Pkg].InstBroken() == true)
- {
- /* We don't call Configure for Pseudo packages and if the 'all' is already installed
- the simulation will think the pseudo package is not installed, so if something is
- broken we walk over the dependencies and search for not installed pseudo packages */
- for (pkgCache::DepIterator D = Sim[Pkg].InstVerIter(Sim).DependsList(); D.end() == false; D++)
- {
- if (Sim.IsImportantDep(D) == false ||
- (Sim[D] & pkgDepCache::DepInstall) != 0)
- continue;
- pkgCache::PkgIterator T = D.TargetPkg();
- if (T.end() == true || T->CurrentVer != 0 || Flags[T->ID] != 0)
- continue;
- pkgCache::PkgIterator A = T.Group().FindPkg("all");
- if (A.end() == true || A->VersionList == 0 || A->CurrentVer == 0 ||
- Cache.VS().CheckDep(A.CurVersion(), pkgCache::Dep::Equals, T.CandVersion()) == false)
- continue;
- Sim.MarkInstall(T, false);
- Flags[T->ID] = 2;
- }
- }
-
if (Sim[Pkg].InstBroken() == true)
{
cout << "Conf " << Pkg.FullName(false) << " broken" << endl;
Flags[Pkg->ID] = 3;
Sim.MarkDelete(Pkg);
- if (strcmp(Pkg.Arch(),"all") == 0)
- {
- pkgCache::GrpIterator G = Pkg.Group();
- pkgCache::GrpIterator iG = iPkg.Group();
- for (pkgCache::PkgIterator P = G.FindPkg("any"); P.end() != true; P = G.NextPkg(P))
- {
- if (strcmp(P.Arch(), "all") == 0)
- continue;
- if (iG.FindPkg(P.Arch())->CurrentVer == 0)
- continue;
- Flags[P->ID] = 3;
- Sim.MarkDelete(P);
- }
- }
-
if (Purge == true)
cout << "Purg ";
else
inline const char *VerStr() const {return S->VerStr == 0?0:Owner->StrP + S->VerStr;};
inline const char *Section() const {return S->Section == 0?0:Owner->StrP + S->Section;};
inline const char *Arch() const {
- if(S->MultiArch == pkgCache::Version::All)
- return "all";
return S->ParentPkg == 0?0:Owner->StrP + ParentPkg()->Arch;
};
- inline const char *Arch(bool const pseudo) const {
- if(pseudo == false)
- return Arch();
+ __deprecated inline const char *Arch(bool const pseudo) const {
return S->ParentPkg == 0?0:Owner->StrP + ParentPkg()->Arch;
};
inline PkgIterator ParentPkg() const {return PkgIterator(*Owner,Owner->PkgP + S->ParentPkg);};
string RelStr() const;
bool Automatic() const;
- bool Pseudo() const;
+ __deprecated bool Pseudo() const;
VerFileIterator NewestFile() const;
inline VerIterator(pkgCache &Owner,Version *Trg = 0) : Iterator<Version, VerIterator>(Owner, Trg) {
inline const char *VerStr() const { return (**this).VerStr(); };
inline const char *Section() const { return (**this).Section(); };
inline const char *Arch() const { return (**this).Arch(); };
- inline const char *Arch(bool const pseudo) const { return (**this).Arch(pseudo); };
+ __deprecated inline const char *Arch(bool const pseudo) const { return (**this).Arch(); };
inline pkgCache::PkgIterator ParentPkg() const { return (**this).ParentPkg(); };
inline pkgCache::DescIterator DescriptionList() const { return (**this).DescriptionList(); };
inline pkgCache::DescIterator TranslatedDescription() const { return (**this).TranslatedDescription(); };
inline const char *PriorityType() const { return (**this).PriorityType(); };
inline string RelStr() const { return (**this).RelStr(); };
inline bool Automatic() const { return (**this).Automatic(); };
- inline bool Pseudo() const { return (**this).Pseudo(); };
+ __deprecated inline bool Pseudo() const { return false; };
inline pkgCache::VerFileIterator NewestFile() const { return (**this).NewestFile(); };
};
/*}}}*/
/*}}}*/
// ListParser::Architecture - Return the package arch /*{{{*/
// ---------------------------------------------------------------------
-/* This will return the Architecture of the package this section describes
- Note that architecture "all" packages will get the architecture of the
- Packages file parsed here. */
+/* This will return the Architecture of the package this section describes */
string debListParser::Architecture() {
- string const Result = Section.FindS("Architecture");
- if (Result.empty() == true || Result == "all")
- {
- if (Arch.empty() == true)
- /* FIXME: this is a problem for installed arch all
- packages as we don't know from which arch this
- package was installed - and therefore which
- dependency this package resolves. */
- return _config->Find("APT::Architecture");
- else
- return Arch;
- }
- return Result;
+ std::string const Arch = Section.FindS("Architecture");
+ if (Arch.empty() == true)
+ return _config->Find("APT::Architecture");
+ return Arch;
}
/*}}}*/
// ListParser::ArchitectureAll /*{{{*/
Ver->Section = UniqFindTagWrite("Section");
// Parse multi-arch
- if (Section.FindS("Architecture") == "all")
- /* Arch all packages can't have a Multi-Arch field,
- but we need a special treatment for them nonetheless */
- Ver->MultiArch = pkgCache::Version::All;
- else
- {
- string const MultiArch = Section.FindS("Multi-Arch");
- if (MultiArch.empty() == true)
- Ver->MultiArch = pkgCache::Version::None;
- else if (MultiArch == "same")
- Ver->MultiArch = pkgCache::Version::Same;
- else if (MultiArch == "foreign")
- Ver->MultiArch = pkgCache::Version::Foreign;
- else if (MultiArch == "allowed")
- Ver->MultiArch = pkgCache::Version::Allowed;
- else
+ string const MultiArch = Section.FindS("Multi-Arch");
+ if (MultiArch.empty() == true)
+ Ver->MultiArch = pkgCache::Version::None;
+ else if (MultiArch == "same") {
+ // Parse multi-arch
+ if (Section.FindS("Architecture") == "all")
{
- _error->Warning("Unknown Multi-Arch type »%s« for package »%s«",
- MultiArch.c_str(), Section.FindS("Package").c_str());
+ /* Arch all packages can't be Multi-Arch: same */
+ _error->Warning("Architecture: all package '%s' can't be Multi-Arch: same",
+ Section.FindS("Package").c_str());
Ver->MultiArch = pkgCache::Version::None;
}
+ else
+ Ver->MultiArch = pkgCache::Version::Same;
+ }
+ else if (MultiArch == "foreign")
+ Ver->MultiArch = pkgCache::Version::Foreign;
+ else if (MultiArch == "allowed")
+ Ver->MultiArch = pkgCache::Version::Allowed;
+ else
+ {
+ _error->Warning("Unknown Multi-Arch type '%s' for package '%s'",
+ MultiArch.c_str(), Section.FindS("Package").c_str());
+ Ver->MultiArch = pkgCache::Version::None;
}
// Archive Size
Ver->Priority = pkgCache::State::Extra;
}
- if (Ver->MultiArch == pkgCache::Version::All)
- {
- /* We maintain a "pseudo" arch=all package for architecture all versions
- on which these versions can depend on. This pseudo package is many used
- for downloading/installing: The other pseudo-packages will degenerate
- to a NOP in the download/install step - this package will ensure that
- it is downloaded only one time and installed only one time -- even if
- the architecture bound versions coming in and out on regular basis. */
- if (strcmp(Ver.Arch(true),"all") == 0)
- return true;
- else if (MultiArchEnabled == true)
- {
- // our pseudo packages have no size to not confuse the fetcher
- Ver->Size = 0;
- Ver->InstalledSize = 0;
- }
- }
-
if (ParseDepends(Ver,"Depends",pkgCache::Dep::Depends) == false)
return false;
if (ParseDepends(Ver,"Pre-Depends",pkgCache::Dep::PreDepends) == false)
return true;
string Package;
- string const pkgArch = Ver.Arch(true);
+ string const pkgArch = Ver.Arch();
string Version;
unsigned int Op;
{
string Package;
string Version;
- string const Arch = Ver.Arch(true);
+ string const Arch = Ver.Arch();
unsigned int Op;
while (1)
if (Architecture == Arch)
return true;
- if (Architecture == "all")
+ if (Architecture == "all" && Arch == _config->Find("APT::Architecture"))
return true;
}
}
}
/*}}}*/
-// DepCache::RemovePseudoInstalledPkg - MultiArch helper for Update() /*{{{*/
-// ---------------------------------------------------------------------
-/* We "install" arch all packages for all archs if it is installed. Many
- of these will be broken. This method will look at these broken Pkg and
- "remove" it. */
-bool pkgDepCache::RemovePseudoInstalledPkg(PkgIterator &Pkg, std::set<unsigned long> &recheck) {
- if (unlikely(Pkg->CurrentVer == 0))
- return false;
-
- VerIterator V = Pkg.CurrentVer();
- if (V->MultiArch != Version::All)
- return false;
-
- // Never ever kill an "all" package - they have no dependency so they can't be broken
- if (strcmp(Pkg.Arch(),"all") == 0)
- return false;
-
- unsigned char const CurDepState = VersionState(V.DependsList(),DepInstall,DepInstMin,DepInstPolicy);
- if ((CurDepState & DepInstMin) == DepInstMin) {
- // okay, the package isn't broken, but is the package also required?
- // If it has no real dependencies, no installed rdepends and doesn't
- // provide something of value, we will kill it as not required.
- // These pseudopackages have otherwise interesting effects if they get
- // a new dependency in a newer version…
- for (pkgCache::DepIterator D = V.DependsList();
- D.end() != true; ++D)
- if (D.IsCritical() == true && D.ParentPkg()->Group != Pkg->Group)
- return false;
- for (DepIterator D = Pkg.RevDependsList(); D.end() != true; ++D)
- {
- if (D.IsCritical() == false)
- continue;
- PkgIterator const P = D.ParentPkg();
- if (P->Group == Pkg->Group)
- continue;
- if (P->CurrentVer != 0)
- return false;
- }
- for (PrvIterator Prv = V.ProvidesList(); Prv.end() != true; Prv++)
- for (DepIterator d = Prv.ParentPkg().RevDependsList();
- d.end() != true; ++d)
- {
- PkgIterator const P = d.ParentPkg();
- if (P->CurrentVer != 0 &&
- P->Group != Pkg->Group)
- return false;
- }
- }
-
- // Dependencies for this arch all package are not statisfied
- // so we installed it only for our convenience: get right of it now.
- RemoveSizes(Pkg);
- RemoveStates(Pkg);
-
- Pkg->CurrentVer = 0;
- PkgState[Pkg->ID].InstallVer = 0;
-
- AddStates(Pkg);
- Update(Pkg);
- AddSizes(Pkg);
-
- // After the remove previously satisfied pseudo pkg could be now
- // no longer satisfied, so we need to recheck the reverse dependencies
- for (DepIterator d = Pkg.RevDependsList(); d.end() != true; ++d)
- {
- PkgIterator const P = d.ParentPkg();
- if (P->CurrentVer != 0)
- recheck.insert(P.Index());
- }
-
- for (DepIterator d = V.DependsList(); d.end() != true; ++d)
- {
- PkgIterator const P = d.TargetPkg();
- for (PrvIterator Prv = P.ProvidesList(); Prv.end() != true; ++Prv)
- {
- PkgIterator const O = Prv.OwnerPkg();
- if (O->CurrentVer != 0)
- recheck.insert(O.Index());
- }
-
- if (P->CurrentVer != 0)
- recheck.insert(P.Index());
- }
-
- for (PrvIterator Prv = V.ProvidesList(); Prv.end() != true; Prv++)
- {
- for (DepIterator d = Prv.ParentPkg().RevDependsList();
- d.end() != true; ++d)
- {
- PkgIterator const P = d.ParentPkg();
- if (P->CurrentVer == 0)
- continue;
-
- recheck.insert(P.Index());
- }
- }
-
-
- return true;
-}
- /*}}}*/
// DepCache::Update - Figure out all the state information /*{{{*/
// ---------------------------------------------------------------------
/* This will figure out the state of all the packages and all the
iBrokenCount = 0;
iBadCount = 0;
- std::set<unsigned long> recheck;
-
// Perform the depends pass
int Done = 0;
- bool const checkMultiArch = APT::Configuration::getArchitectures().size() > 1;
- unsigned long killed = 0;
for (PkgIterator I = PkgBegin(); I.end() != true; I++,Done++)
{
if (Prog != 0 && Done%20 == 0)
AddSizes(I);
UpdateVerState(I);
AddStates(I);
-
- if (checkMultiArch != true || I->CurrentVer == 0)
- continue;
-
- VerIterator const V = I.CurrentVer();
- if (V->MultiArch != Version::All)
- continue;
-
- recheck.insert(I.Index());
- --Done; // no progress if we need to recheck the package
- }
-
- if (checkMultiArch == true) {
- /* FIXME: recheck breaks proper progress reporting as we don't know
- how many packages we need to recheck. To lower the effect
- a bit we increase with a kill, but we should do something more clever… */
- while(recheck.empty() == false)
- for (std::set<unsigned long>::const_iterator p = recheck.begin();
- p != recheck.end();) {
- if (Prog != 0 && Done%20 == 0)
- Prog->Progress(Done);
- PkgIterator P = PkgIterator(*Cache, Cache->PkgP + *p);
- if (RemovePseudoInstalledPkg(P, recheck) == true) {
- ++killed;
- ++Done;
- }
- recheck.erase(p++);
- }
-
- /* Okay, we have killed a great amount of pseudopackages -
- we have killed so many that we have now arch "all" packages
- without an installed pseudo package, but we NEED an installed
- pseudo package, so we will search now for a pseudo package
- we can install without breaking everything. */
- for (GrpIterator G = Cache->GrpBegin(); G.end() != true; ++G)
- {
- PkgIterator P = G.FindPkg("all");
- if (P.end() == true)
- continue;
- if (P->CurrentVer == 0)
- continue;
- bool installed = false;
- for (P = G.FindPkg("any"); P.end() != true; P = G.NextPkg(P))
- {
- if (strcmp(P.Arch(), "all") == 0)
- continue;
- if (P->CurrentVer == 0)
- continue;
- installed = true;
- break;
- }
- if (installed == false)
- recheck.insert(G.Index());
- }
-
- while (recheck.empty() != true)
- {
- std::set<unsigned long>::const_iterator g = recheck.begin();
- unsigned long const G = *g;
- recheck.erase(g);
- if (unlikely(ReInstallPseudoForGroup(G, recheck) == false))
- _error->Warning(_("Internal error, group '%s' has no installable pseudo package"), GrpIterator(*Cache, Cache->GrpP + G).Name());
- }
}
if (Prog != 0)
readStateFile(Prog);
}
/*}}}*/
-// DepCache::ReInstallPseudoForGroup - MultiArch helper for Update() /*{{{*/
-// ---------------------------------------------------------------------
-/* RemovePseudoInstalledPkg() is very successful. It even kills packages
- to an amount that no pseudo package is left, but we need a pseudo package
- for upgrading senarios so we need to reinstall one pseudopackage which
- doesn't break everything. Thankfully we can't have architecture depending
- negative dependencies so this problem is already eliminated */
-bool pkgDepCache::ReInstallPseudoForGroup(pkgCache::PkgIterator const &P, std::set<unsigned long> &recheck)
-{
- if (P->CurrentVer != 0)
- return true;
- // recursive call for packages which provide this package
- for (pkgCache::PrvIterator Prv = P.ProvidesList(); Prv.end() != true; ++Prv)
- ReInstallPseudoForGroup(Prv.OwnerPkg(), recheck);
- // check if we actually need to look at this group
- unsigned long const G = P->Group;
- std::set<unsigned long>::const_iterator Pi = recheck.find(G);
- if (Pi == recheck.end())
- return true;
- recheck.erase(Pi); // remove here, so we can't fall into an endless loop
- if (unlikely(ReInstallPseudoForGroup(G, recheck) == false))
- {
- recheck.insert(G);
- return false;
- }
- return true;
-}
-bool pkgDepCache::ReInstallPseudoForGroup(unsigned long const &G, std::set<unsigned long> &recheck)
-{
- std::vector<std::string> static const Archs = APT::Configuration::getArchitectures();
- pkgCache::GrpIterator Grp(*Cache, Cache->GrpP + G);
- if (unlikely(Grp.end() == true))
- return false;
- for (std::vector<std::string>::const_iterator a = Archs.begin();
- a != Archs.end(); ++a)
- {
- pkgCache::PkgIterator P = Grp.FindPkg(*a);
- if (P.end() == true)
- continue;
- pkgCache::VerIterator allV = Grp.FindPkg("all").CurrentVer();
- for (VerIterator V = P.VersionList(); V.end() != true; ++V)
- {
- // search for the same version as the all package
- if (allV->Hash != V->Hash || strcmp(allV.VerStr(),V.VerStr()) != 0)
- continue;
- unsigned char const CurDepState = VersionState(V.DependsList(),DepInstall,DepInstMin,DepInstPolicy);
- // If it is broken, try to install dependencies first before retry
- if ((CurDepState & DepInstMin) != DepInstMin)
- {
- for (pkgCache::DepIterator D = V.DependsList(); D.end() != true; ++D)
- {
- if (D->Type != pkgCache::Dep::PreDepends && D->Type != pkgCache::Dep::Depends)
- continue;
- ReInstallPseudoForGroup(D.TargetPkg(), recheck);
- }
- unsigned char const CurDepState = VersionState(V.DependsList(),DepInstall,DepInstMin,DepInstPolicy);
- // if package ist still broken… try another arch
- if ((CurDepState & DepInstMin) != DepInstMin)
- break;
- }
- // dependencies satisfied: reinstall the package
- RemoveSizes(P);
- RemoveStates(P);
- P->CurrentVer = V.Index();
- PkgState[P->ID].InstallVer = V;
- AddStates(P);
- Update(P);
- AddSizes(P);
- return true;
- }
- }
- return false;
-}
- /*}}}*/
// DepCache::Update - Update the deps list of a package /*{{{*/
// ---------------------------------------------------------------------
/* This is a helper for update that only does the dep portion of the scan.
Update(Pkg);
AddSizes(Pkg);
- // if we remove the pseudo package, we also need to remove the "real"
- if (Pkg->CurrentVer != 0 && Pkg.CurrentVer().Pseudo() == true)
- MarkDelete(Pkg.Group().FindPkg("all"), rPurge, Depth+1, FromUser);
- else if (rPurge == true && Pkg->CurrentVer == 0 &&
- Pkg->CurrentState != pkgCache::State::NotInstalled &&
- strcmp(Pkg.Arch(), "all") != 0)
- {
- PkgIterator const allPkg = Pkg.Group().FindPkg("all");
- if (allPkg.end() == false && allPkg->CurrentVer == 0 &&
- allPkg->CurrentState != pkgCache::State::NotInstalled)
- MarkDelete(allPkg, rPurge, Depth+1, FromUser);
- }
}
/*}}}*/
// DepCache::IsDeleteOk - check if it is ok to remove this package /*{{{*/
Update(Pkg);
AddSizes(Pkg);
- // always trigger the install of the all package for a pseudo package
- if (P.CandidateVerIter(*Cache).Pseudo() == true)
- MarkInstall(Pkg.Group().FindPkg("all"), AutoInst, Depth, FromUser, ForceImportantDeps);
-
if (AutoInst == false)
return;
AddStates(Pkg);
AddSizes(Pkg);
- if (unlikely(Pkg.CurrentVer().end() == true) || Pkg.CurrentVer().Pseudo() == false)
+ if (unlikely(Pkg.CurrentVer().end() == true))
return;
SetReInstall(Pkg.Group().FindPkg("all"), To);
/* */
void pkgDepCache::SetCandidateVersion(VerIterator TargetVer, bool const &Pseudo)
{
-
pkgCache::PkgIterator Pkg = TargetVer.ParentPkg();
StateCache &P = PkgState[Pkg->ID];
Update(Pkg);
AddSizes(Pkg);
- if (TargetVer.Pseudo() == false || Pseudo == false)
- return;
-
- // the version was pseudo: set all other pseudos also
- pkgCache::GrpIterator Grp = Pkg.Group();
- for (Pkg = Grp.FindPkg("any"); Pkg.end() == false; ++Pkg)
- {
- StateCache &P = PkgState[Pkg->ID];
- if (TargetVer.SimilarVer(P.CandidateVerIter(*this)) == true ||
- (P.CandidateVerIter(*this).Pseudo() == false &&
- strcmp(Pkg.Arch(), "all") != 0))
- continue;
-
- for (pkgCache::VerIterator Ver = Pkg.VersionList(); Ver.end() == false; ++Ver)
- {
- if (TargetVer.SimilarVer(Ver) == false)
- continue;
- SetCandidateVersion(Ver, false);
- break;
- }
- }
}
/*}}}*/
// DepCache::SetCandidateRelease - Change the candidate version /*{{{*/
if(ver.end() == true)
return;
- // If the version belongs to a Multi-Arch all package
- // we will mark all others in this Group with this version also
- if (ver->MultiArch == pkgCache::Version::All &&
- strcmp(ver.Arch(true), "all") == 0)
- {
- GrpIterator G = pkg.Group();
- const char* const VerStr = ver.VerStr();
- for (PkgIterator P = G.FindPkg("any");
- P.end() != true; P = G.NextPkg(P))
- {
- for (VerIterator V = P.VersionList();
- V.end() != true; ++V)
- {
- if (ver->Hash != V->Hash ||
- strcmp(VerStr, V.VerStr()) != 0)
- continue;
- MarkPackage(P, V, follow_recommends, follow_suggests);
- break;
- }
- }
- }
-
for(DepIterator d = ver.DependsList(); !d.end(); ++d)
{
if(d->Type == Dep::Depends ||
bool ForceImportantDeps = false);
void SetReInstall(PkgIterator const &Pkg,bool To);
+ // FIXME: Remove the unused boolean parameter on abi break
void SetCandidateVersion(VerIterator TargetVer, bool const &Pseudo = true);
bool SetCandidateRelease(pkgCache::VerIterator TargetVer,
std::string const &TargetRel);
private:
// Helper for Update(OpProgress) to remove pseudoinstalled arch all packages
- bool RemovePseudoInstalledPkg(PkgIterator &Pkg, std::set<unsigned long> &recheck);
- bool ReInstallPseudoForGroup(unsigned long const &Grp, std::set<unsigned long> &recheck);
- bool ReInstallPseudoForGroup(pkgCache::PkgIterator const &P, std::set<unsigned long> &recheck);
+ // FIXME: they are private so shouldn't affect abi, but just in case…
+ __deprecated bool RemovePseudoInstalledPkg(PkgIterator &Pkg, std::set<unsigned long> &recheck) { return true; };
+ __deprecated bool ReInstallPseudoForGroup(unsigned long const &Grp, std::set<unsigned long> &recheck) { return true; };
+ __deprecated bool ReInstallPseudoForGroup(pkgCache::PkgIterator const &P, std::set<unsigned long> &recheck) { return true; };
};
#endif
if (FileList[Pkg->ID].empty() == false)
return false;
- // Missing Pseudo packages are missing if the real package is missing
- if (pkgCache::VerIterator(Cache, Cache[Pkg].CandidateVer).Pseudo() == true)
- return IsMissing(Pkg.Group().FindPkg("all"));
-
return true;
}
/*}}}*/
if (List->IsNow(Pkg) == false)
continue;
- if (pkgCache::VerIterator(Cache, Cache[Pkg].CandidateVer).Pseudo() == true)
- continue;
-
new pkgAcqArchive(Owner,Sources,Recs,Cache[Pkg].InstVerIter(Cache),
FileNames[Pkg->ID]);
}
{
PkgIterator Pkg(Cache,*I);
- if (ConfigurePkgs == true &&
- pkgCache::VerIterator(Cache, Cache[Pkg].CandidateVer).Pseudo() == false &&
- Configure(Pkg) == false)
+ if (ConfigurePkgs == true && Configure(Pkg) == false)
return false;
List->Flag(Pkg,pkgOrderList::Configured,pkgOrderList::States);
{
PkgIterator Pkg(Cache,*I);
- if (ConfigurePkgs == true &&
- pkgCache::VerIterator(Cache, Cache[Pkg].CandidateVer).Pseudo() == false &&
- Configure(Pkg) == false)
+ if (ConfigurePkgs == true && Configure(Pkg) == false)
return false;
List->Flag(Pkg,pkgOrderList::Configured,pkgOrderList::States);
List->Flag(Pkg,pkgOrderList::Configured,pkgOrderList::States);
- if (pkgCache::VerIterator(Cache, Cache[Pkg].CandidateVer).Pseudo() == false)
- return Remove(Pkg,(Cache[Pkg].iFlags & pkgDepCache::Purge) == pkgDepCache::Purge);
- else
- return SmartRemove(Pkg.Group().FindPkg("all"));
+ return Remove(Pkg,(Cache[Pkg].iFlags & pkgDepCache::Purge) == pkgDepCache::Purge);
return true;
}
/*}}}*/
P.end() == false; P++)
CheckRConflicts(Pkg,P.ParentPkg().RevDependsList(),P.ProvideVersion());
- if (pkgCache::VerIterator(Cache, Cache[Pkg].CandidateVer).Pseudo() == false)
- {
- if(Install(Pkg,FileNames[Pkg->ID]) == false)
- return false;
- } else {
- // Pseudo packages will not be unpacked - instead we will do this
- // for the "real" package, but only once and if it is already
- // configured we don't need to unpack it again…
- PkgIterator const P = Pkg.Group().FindPkg("all");
- if (List->IsFlag(P,pkgOrderList::UnPacked) != true &&
- List->IsFlag(P,pkgOrderList::Configured) != true &&
- P.State() != pkgCache::PkgIterator::NeedsNothing) {
- if (SmartUnPack(P) == false)
- return false;
- }
- }
+ if(Install(Pkg,FileNames[Pkg->ID]) == false)
+ return false;
+
List->Flag(Pkg,pkgOrderList::UnPacked,pkgOrderList::States);
// Perform immedate configuration of the package.
return false;
}
/*}}}*/
-// VerIterator::Pseudo - Check if this version is a pseudo one /*{{{*/
-// ---------------------------------------------------------------------
-/* Sometimes you have the need to express dependencies with versions
- which doesn't really exist or exist multiply times for "different"
- packages. We need these versions for dependency resolution but they
- are a problem everytime we need to download/install something. */
-bool pkgCache::VerIterator::Pseudo() const
-{
- if (S->MultiArch == pkgCache::Version::All &&
- strcmp(Arch(true),"all") != 0)
- {
- GrpIterator const Grp = ParentPkg().Group();
- return (Grp->LastPackage != Grp->FirstPackage);
- }
- return false;
-}
+// VerIterator::Pseudo - deprecated no-op method /*{{{*/
+bool pkgCache::VerIterator::Pseudo() const { return false; }
/*}}}*/
// VerIterator::NewestFile - Return the newest file version relation /*{{{*/
// ---------------------------------------------------------------------
Foreign means that this version can fulfill dependencies even
if it is built for another architecture as the requester.
Same indicates that builds for different architectures can
- be co-installed on the system and All is the marker for a
- version with the Architecture: all. */
+ be co-installed on the system */
+ // FIXME: remove All on abi break
enum {None, All, Foreign, Same, Allowed} MultiArch;
/** \brief references all the PackageFile's that this version came from
if (PackageName.empty() == true)
return false;
- /* As we handle Arch all packages as architecture bounded
- we add all information to every (simulated) arch package */
- std::vector<string> genArch;
- if (List.ArchitectureAll() == true) {
- genArch = APT::Configuration::getArchitectures();
- if (genArch.size() != 1)
- genArch.push_back("all");
- } else
- genArch.push_back(List.Architecture());
-
- for (std::vector<string>::const_iterator arch = genArch.begin();
- arch != genArch.end(); ++arch)
- {
+ /* Treat Arch all packages as the same as the native arch. */
+ string Arch;
+ if (List.ArchitectureAll() == true)
+ Arch = _config->Find("APT::Architecture");
+ else
+ Arch = List.Architecture();
+
// Get a pointer to the package structure
pkgCache::PkgIterator Pkg;
Dynamic<pkgCache::PkgIterator> DynPkg(Pkg);
- if (NewPackage(Pkg, PackageName, *arch) == false)
+ if (NewPackage(Pkg, PackageName, Arch) == false)
return _error->Error(_("Error occurred while processing %s (NewPackage)"),PackageName.c_str());
Counter++;
if (Counter % 100 == 0 && Progress != 0)
if ((*LastDesc == 0 && _error->PendingError()) || NewFileDesc(Desc,List) == false)
return _error->Error(_("Error occurred while processing %s (NewFileDesc2)"),PackageName.c_str());
- }
}
FoundFileDeps |= List.HasFileDeps();
- MultiArch: same → Co-Installable if they have the same version
- Architecture: all → Need to be Co-Installable for internal reasons
- All others conflict with all other group members */
- bool const coInstall = ((V->MultiArch == pkgCache::Version::All && strcmp(Arch, "all") != 0) ||
- V->MultiArch == pkgCache::Version::Same);
- if (V->MultiArch == pkgCache::Version::All && allPkg.end() == true)
- allPkg = G.FindPkg("all");
+ bool const coInstall = (V->MultiArch == pkgCache::Version::Same);
for (vector<string>::const_iterator A = archs.begin(); A != archs.end(); ++A)
{
if (*A == Arch)
NewDepends(D, V, V.VerStr(),
pkgCache::Dep::NotEquals, pkgCache::Dep::DpkgBreaks,
OldDepLast);
- if (V->MultiArch == pkgCache::Version::All)
- {
- // Depend on ${self}:all which does depend on nothing
- NewDepends(allPkg, V, V.VerStr(),
- pkgCache::Dep::Equals, pkgCache::Dep::Depends,
- OldDepLast);
- }
} else {
// Conflicts: ${self}:other
- if (strcmp(Arch, "all") == 0) {
- NewDepends(D, V, V.VerStr(),
- pkgCache::Dep::NotEquals, pkgCache::Dep::Conflicts,
- OldDepLast);
- } else {
- NewDepends(D, V, "",
- pkgCache::Dep::NoOp, pkgCache::Dep::Conflicts,
- OldDepLast);
- }
+ NewDepends(D, V, "",
+ pkgCache::Dep::NoOp, pkgCache::Dep::Conflicts,
+ OldDepLast);
}
}
}
pkgCache &Cache = Owner->Cache;
// We do not add self referencing provides
- if (Ver.ParentPkg().Name() == PkgName && PkgArch == Ver.Arch(true))
+ if (Ver.ParentPkg().Name() == PkgName && PkgArch == Ver.Arch())
return true;
// Get a structure
{
/* Lets see if this version is the installed version */
bool instVer = (Pkg.CurrentVer() == Ver);
- if (Ver.Pseudo() == true && instVer == false)
- {
- pkgCache::PkgIterator const allPkg = Ver.ParentPkg().Group().FindPkg("all");
- if (allPkg->CurrentVer != 0 && allPkg.CurrentVer()->Hash == Ver->Hash &&
- strcmp(allPkg.CurVersion(), Ver.VerStr()) == 0)
- instVer = true;
- }
for (pkgCache::VerFileIterator VF = Ver.FileList(); VF.end() == false; VF++)
{
return true;
}
- string const myArch = _config->Find("APT::Architecture");
char const * const msgInstalled = _(" Installed: ");
char const * const msgCandidate = _(" Candidate: ");
short const InstalledLessCandidate =
// Print out detailed information for each package
APT::CacheSetHelper helper(true, GlobalError::NOTICE);
APT::PackageSet pkgset = APT::PackageSet::FromCommandLine(CacheFile, CmdL.FileList + 1, helper);
- for (APT::PackageSet::const_iterator I = pkgset.begin(); I != pkgset.end(); ++I)
+ for (APT::PackageSet::const_iterator Pkg = pkgset.begin(); Pkg != pkgset.end(); ++Pkg)
{
- pkgCache::PkgIterator Pkg = I.Group().FindPkg("any");
-
- for (; Pkg.end() != true; Pkg = I.Group().NextPkg(Pkg)) {
- if (strcmp(Pkg.Arch(),"all") == 0)
- continue;
-
cout << Pkg.FullName(true) << ":" << endl;
// Installed version
Indx->Describe(true).c_str());
}
}
- }
}
return true;
{
pkgCache::PkgIterator I(Cache,Cache.List[J]);
if (Cache[I].NewInstall() == true) {
- if (Cache[I].CandidateVerIter(Cache).Pseudo() == true)
- continue;
List += I.FullName(true) + " ";
VersionsList += string(Cache[I].CandVersion) + "\n";
}
pkgCache::PkgIterator I(Cache,Cache.List[J]);
if (Cache[I].Delete() == true)
{
- if (Cache[I].CandidateVerIter(Cache).Pseudo() == true)
- continue;
if ((Cache[I].iFlags & pkgDepCache::Purge) == pkgDepCache::Purge)
List += I.FullName(true) + "* ";
else
// Not interesting
if (Cache[I].Upgrade() == false || Cache[I].NewInstall() == true)
continue;
- if (Cache[I].CandidateVerIter(Cache).Pseudo() == true)
- continue;
List += I.FullName(true) + " ";
VersionsList += string(Cache[I].CurVersion) + " => " + Cache[I].CandVersion + "\n";
// Not interesting
if (Cache[I].Downgrade() == false || Cache[I].NewInstall() == true)
continue;
- if (Cache[I].CandidateVerIter(Cache).Pseudo() == true)
- continue;
List += I.FullName(true) + " ";
VersionsList += string(Cache[I].CurVersion) + " => " + Cache[I].CandVersion + "\n";
unsigned long ReInstall = 0;
for (pkgCache::PkgIterator I = Dep.PkgBegin(); I.end() == false; I++)
{
- if (pkgCache::VerIterator(Dep, Dep[I].CandidateVer).Pseudo() == true)
- continue;
-
if (Dep[I].NewInstall() == true)
Install++;
else
if ((*Cache)[I].Install() == false)
continue;
pkgCache::VerIterator Cand = Cache[I].CandidateVerIter(Cache);
- if (Cand.Pseudo() == true)
- continue;
if (verset[MOD_INSTALL].find(Cand) != verset[MOD_INSTALL].end())
continue;
(c++)"pkgDepCache::DefaultRootSetFunc::InRootSet(pkgCache::PkgIterator const&)@Base" 0.8.0
(c++)"pkgDepCache::DefaultRootSetFunc::~DefaultRootSetFunc()@Base" 0.8.0
(c++)"pkgDepCache::MarkFollowsSuggests()@Base" 0.8.0
- (c++)"pkgDepCache::SetCandidateVersion(pkgCache::VerIterator, bool const&)@Base" 0.8.0
+ (c++)"pkgDepCache::SetCandidateVersion(pkgCache::VerIterator)@Base" 0.8.0
(c++)"pkgDepCache::MarkFollowsRecommends()@Base" 0.8.0
(c++)"pkgDepCache::ReInstallPseudoForGroup(pkgCache::PkgIterator const&, std::set<unsigned long, std::less<unsigned long>, std::allocator<unsigned long> >&)@Base" 0.8.0
(c++)"pkgDepCache::ReInstallPseudoForGroup(unsigned long const&, std::set<unsigned long, std::less<unsigned long>, std::allocator<unsigned long> >&)@Base" 0.8.0
* apt-pkg/deb/dpkgpm.cc:
- make sure that for multiarch packages, we are passing the full
qualified package name to dpkg for removals. (Closes: #614298)
+ * Remove the "pseudopackage" handling of Architecture: all packages for
+ Multi-Arch; instead, Arch: all packages only satisfy dependencies for
+ the native arch, except where the Arch: all package is declared
+ Multi-Arch: foreign. (Closes: #613584)
- -- David Kalnischkies <kalnischkies@gmail.com> Mon, 07 Mar 2011 22:46:24 +0100
+ -- David Kalnischkies <kalnischkies@gmail.com> Tue, 08 Mar 2011 19:20:56 +0100
apt (0.8.11.5) unstable; urgency=low
The following NEW packages will be installed:
coolstuff
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
-Inst coolstuff (1.0 unstable [all])
-Conf coolstuff (1.0 unstable [all])' aptget install coolstuff extracoolstuff- -o Debug::pkgDepCache::Marker=1 -s
+Inst coolstuff (1.0 unstable [i386])
+Conf coolstuff (1.0 unstable [i386])' aptget install coolstuff extracoolstuff- -o Debug::pkgDepCache::Marker=1 -s
echo "$pkgbasefile
Pre-Depends: $1
" >> rootdir/var/lib/dpkg/status
- testequalor2 "Inst coolstuff (1-1 localhost [all])
-Conf coolstuff (1-1 localhost [all])
+ testequalor2 "Inst coolstuff (1-1 localhost [i386])
+Conf coolstuff (1-1 localhost [i386])
Inst gawk2 (1:3.1.7.dfsg-5 localhost [i386])
Conf gawk2 (1:3.1.7.dfsg-5 localhost [i386])
-Remv mawk [1.3.3-15]" "Inst coolstuff (1-1 localhost [all])
+Remv mawk [1.3.3-15]" "Inst coolstuff (1-1 localhost [i386])
Inst gawk2 (1:3.1.7.dfsg-5 localhost [i386])
-Conf coolstuff (1-1 localhost [all])
+Conf coolstuff (1-1 localhost [i386])
Conf gawk2 (1:3.1.7.dfsg-5 localhost [i386])
Remv mawk [1.3.3-15]" aptget install gawk2 mawk- -sqq -o PreDepends=$(echo "$1" | sed 's/ //g')
}
The following NEW packages will be installed:
apt
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
-Inst apt (0.8.8 localhost [all])
-Conf apt (0.8.8 localhost [all])' aptget install apt -s
+Inst apt (0.8.8 localhost [i386])
+Conf apt (0.8.8 localhost [i386])' aptget install apt -s
testequal 'Reading package lists...
Building dependency tree...
The following NEW packages will be installed:
apt+
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
-Inst apt+ (0.8.8 localhost [all])
-Conf apt+ (0.8.8 localhost [all])' aptget install apt+ -s
+Inst apt+ (0.8.8 localhost [i386])
+Conf apt+ (0.8.8 localhost [i386])' aptget install apt+ -s
testequal 'Reading package lists...
Building dependency tree...
The following NEW packages will be installed:
apt+
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
-Inst apt+ (0.8.8 localhost [all])
-Conf apt+ (0.8.8 localhost [all])' aptget install apt++ -s
+Inst apt+ (0.8.8 localhost [i386])
+Conf apt+ (0.8.8 localhost [i386])' aptget install apt++ -s
testequal 'Reading package lists...
Building dependency tree...
The following NEW packages will be installed:
apt+
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
-Inst apt+ (0.8.8 localhost [all])
-Conf apt+ (0.8.8 localhost [all])' aptget purge apt++ -s
+Inst apt+ (0.8.8 localhost [i386])
+Conf apt+ (0.8.8 localhost [i386])' aptget purge apt++ -s
Conf libc6:amd64 (1.0 stable [amd64])
Conf foobar:amd64 (1.0 stable [amd64])' aptget install foobar:amd64 -st stable
-# FIXME: libc6:i386 is installed, we are switching to libc6:all
testequal 'Reading package lists...
Building dependency tree...
Reading state information...
-The following extra packages will be installed:
- libc6
The following NEW packages will be installed:
- foobar libc6
-0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
-Inst libc6 (2.0 testing, testing [all])
+ foobar
+The following packages will be upgraded:
+ libc6
+1 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
+Inst libc6 [1.0] (2.0 testing [i386])
Inst foobar (1.0 stable [i386])
-Conf libc6 (2.0 testing, testing [all])
+Conf libc6 (2.0 testing [i386])
Conf foobar (1.0 stable [i386])' aptget install foobar/stable libc6 -st testing
-# FIXME: libc6:i386 is installed, we are switching to libc6:all
testequal 'Reading package lists...
Building dependency tree...
Reading state information...
-The following NEW packages will be installed:
+The following packages will be upgraded:
libc6
-0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
-Inst libc6 (2.0 testing, testing [all])
-Conf libc6 (2.0 testing, testing [all])' aptget upgrade -t testing -s
+1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+Inst libc6 [1.0] (2.0 testing [i386])
+Conf libc6 (2.0 testing [i386])' aptget upgrade -t testing -s
aptget upgrade -y -qq 2>&1 > /dev/null
testdpkginstalled libc6
The following NEW packages will be installed:
foobar
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
-Inst foobar (1.0 stable [i386]) []
+Inst foobar (1.0 stable [i386])
Conf foobar (1.0 stable [i386])' aptget install foobar/stable -st testing
testequal 'Reading package lists...
Building dependency tree...
Reading state information...
+The following extra packages will be installed:
+ libc6:amd64
+The following packages will be REMOVED:
+ libc6
The following NEW packages will be installed:
- foobar:amd64
-0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
+ foobar:amd64 libc6:amd64
+0 upgraded, 2 newly installed, 1 to remove and 0 not upgraded.
+Remv libc6 [2.0]
+Inst libc6:amd64 (1.0 stable [amd64])
Inst foobar:amd64 (1.0 stable [amd64])
+Conf libc6:amd64 (1.0 stable [amd64])
Conf foobar:amd64 (1.0 stable [amd64])' aptget install foobar:amd64/stable -st testing
-# FIXME: the display is a strange (its a downgrade), but the handling itself correct
testequal "Reading package lists...
Building dependency tree...
Reading state information...
Selected version '1.0' (stable [i386]) for 'libc6'
-The following packages will be REMOVED:
+The following packages will be DOWNGRADED:
libc6
-The following NEW packages will be installed:
- libc6
-0 upgraded, 1 newly installed, 2 to remove and 0 not upgraded.
-Remv libc6 [2.0]
-Inst libc6 (1.0 stable [i386])
+0 upgraded, 0 newly installed, 1 downgraded, 0 to remove and 0 not upgraded.
+Inst libc6 [2.0] (1.0 stable [i386])
Conf libc6 (1.0 stable [i386])" aptget install libc6/stable -s -q=0
# FIXME: We should test installing libc6-same:amd64 here, but dpkg doesn't allow it currently
-# FIXME: upgrade any to all as above
testequal 'Reading package lists...
Building dependency tree...
Reading state information...
-The following NEW packages will be installed:
+The following packages will be upgraded:
libc6-same
-0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
-Inst libc6-same (2.0 testing, testing [all])
-Conf libc6-same (2.0 testing, testing [all])' aptget upgrade -t testing -s
+1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+Inst libc6-same [1.0] (2.0 testing [i386])
+Conf libc6-same (2.0 testing [i386])' aptget upgrade -t testing -s
aptget upgrade -y -qq 2>&1 > /dev/null
testdpkginstalled libc6-same
-# FIXME: the display is a strange (its a downgrade), but the handling itself correct
testequal "Reading package lists...
Building dependency tree...
Reading state information...
Selected version '1.0' (stable [i386]) for 'libc6-same'
-The following packages will be REMOVED:
+The following packages will be DOWNGRADED:
libc6-same
-The following NEW packages will be installed:
- libc6-same
-0 upgraded, 1 newly installed, 2 to remove and 0 not upgraded.
-Remv libc6-same [2.0]
-Inst libc6-same (1.0 stable [i386])
+0 upgraded, 0 newly installed, 1 downgraded, 0 to remove and 0 not upgraded.
+Inst libc6-same [2.0] (1.0 stable [i386])
Conf libc6-same (1.0 stable [i386])" aptget install libc6-same/stable -s -q=0
testequal 'Reading package lists...
The following NEW packages will be installed:
foobar-same
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
-Inst foobar-same (1.0 stable [i386]) []
+Inst foobar-same (1.0 stable [i386])
Conf foobar-same (1.0 stable [i386])' aptget install foobar-same/stable -st testing
testequal 'Reading package lists...
Building dependency tree...
Reading state information...
+The following extra packages will be installed:
+ libc6-same:amd64
+The following packages will be REMOVED:
+ libc6-same
The following NEW packages will be installed:
- foobar-same:amd64
-0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
+ foobar-same:amd64 libc6-same:amd64
+0 upgraded, 2 newly installed, 1 to remove and 0 not upgraded.
+Remv libc6-same [2.0]
+Inst libc6-same:amd64 (1.0 stable [amd64])
Inst foobar-same:amd64 (1.0 stable [amd64])
+Conf libc6-same:amd64 (1.0 stable [amd64])
Conf foobar-same:amd64 (1.0 stable [amd64])' aptget install foobar-same:amd64/stable -st testing
testequal "Reading package lists...
Building dependency tree...
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-utils' because of 'amarok'
The following extra packages will be installed:
amarok-common (2.3.2-2+exp)
testequal "Reading package lists...
Building dependency tree...
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-null'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok-null'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok-null'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-utils' because of 'amarok-null'
The following extra packages will be installed:
amarok-common (2.3.2-2+exp)
testequal "Reading package lists...
Building dependency tree...
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-utils' because of 'amarok'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-null'
The following extra packages will be installed:
Selected version '2.3.2-2+exp' (experimental2 [i386]) for 'amarok-less'
Selected version '5:4.6.0+exp' (experimental [i386]) for 'phonon-backend-xine' because of 'amarok-less'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-higher'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok-higher'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok-higher'
Selected version '5:4.6.0+exp' (experimental [i386]) for 'phonon-backend-xine' because of 'amarok-higher'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-utils' because of 'amarok-higher'
The following extra packages will be installed:
testequal "Reading package lists...
Building dependency tree...
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-null2'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok-null2'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok-null2'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-utils' because of 'amarok-null2'
The following extra packages will be installed:
amarok-common (2.3.2-2+exp)
testequal "Reading package lists...
Building dependency tree...
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-xine'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok-xine'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok-xine'
Selected version '5:4.6.0+exp' (experimental [i386]) for 'phonon-backend-xine' because of 'amarok-xine'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-utils' because of 'amarok-xine'
The following extra packages will be installed:
testequal "Reading package lists...
Building dependency tree...
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-xine2'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok-xine2'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok-xine2'
Selected version '5:4.20.0+exp' (experimental [i386]) for 'phonon-backend-null' because of 'amarok-xine2'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-utils' because of 'amarok-xine2'
The following extra packages will be installed:
testequal "Reading package lists...
Building dependency tree...
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-xine3'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok-xine3'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok-xine3'
Selected version '5:4.6.0+exp' (experimental [i386]) for 'phonon-backend-xine3' because of 'amarok-xine3'
-Selected version '2.0' (experimental [all]) for 'intermediatepkg' because of 'phonon-backend-xine3'
+Selected version '2.0' (experimental [i386]) for 'intermediatepkg' because of 'phonon-backend-xine3'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-utils' because of 'amarok-xine3'
The following extra packages will be installed:
amarok-common (2.3.2-2+exp)
testequal "Reading package lists...
Building dependency tree...
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-xine4'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok-xine4'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok-xine4'
Selected version '5:4.20.0+exp' (experimental [i386]) for 'phonon-backend-null' because of 'amarok-xine4'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-utils' because of 'amarok-xine4'
The following extra packages will be installed:
testequal "Reading package lists...
Building dependency tree...
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-broken'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok-broken'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok-broken'
Selected version '5:4.20.0+exp' (experimental [i386]) for 'phonon-backend-null' because of 'amarok-broken'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-utils' because of 'amarok-broken'
The following extra packages will be installed:
testequal "Reading package lists...
Building dependency tree...
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-recommends'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok-recommends'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok-recommends'
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-utils' because of 'amarok-recommends'
The following extra packages will be installed:
amarok-common (2.3.2-2+exp)
testequal "Reading package lists...
Building dependency tree...
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-recommends'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok-recommends'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok-recommends'
The following extra packages will be installed:
amarok-common (2.3.2-2+exp)
Recommended packages:
testequal "Reading package lists...
Building dependency tree...
Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-recommends2'
-Selected version '2.3.2-2+exp' (experimental [all]) for 'amarok-common' because of 'amarok-recommends2'
+Selected version '2.3.2-2+exp' (experimental [i386]) for 'amarok-common' because of 'amarok-recommends2'
The following extra packages will be installed:
amarok-common (2.3.2-2+exp)
libc6 (2.11.2-7+sid)
# if one depends doesn't work, we don't need to look deeper…
testequal "Reading package lists...
Building dependency tree...
-Selected version '1.0' (experimental [all]) for 'uninstallablepkg'
+Selected version '1.0' (experimental [i386]) for 'uninstallablepkg'
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
projects / apt.git / commitdiff
