if (List->IsNow(Pkg) == false)
continue;
- if (pkgCache::VerIterator(Cache, Cache[Pkg].CandidateVer).Pseudo() == true)
- continue;
-
new pkgAcqArchive(Owner,Sources,Recs,Cache[Pkg].InstVerIter(Cache),
FileNames[Pkg->ID]);
}
{
PkgIterator Pkg(Cache,*I);
- if (ConfigurePkgs == true &&
- pkgCache::VerIterator(Cache, Cache[Pkg].CandidateVer).Pseudo() == false &&
- Configure(Pkg) == false)
+ if (ConfigurePkgs == true && VerifyConfigure(Pkg) == false)
return false;
List->Flag(Pkg,pkgOrderList::Configured,pkgOrderList::States);
{
PkgIterator Pkg(Cache,*I);
- if (ConfigurePkgs == true &&
- pkgCache::VerIterator(Cache, Cache[Pkg].CandidateVer).Pseudo() == false &&
- Configure(Pkg) == false)
+ if (ConfigurePkgs == true && VerifyConfigure(Pkg) == false)
return false;
List->Flag(Pkg,pkgOrderList::Configured,pkgOrderList::States);
}
+ if (Cache[Pkg].InstVerIter(Cache)->MultiArch == pkgCache::Version::Same)
+ for (PkgIterator P = Pkg.Group().PackageList();
+ P.end() == false; P = Pkg.Group().NextPkg(P))
+ {
+ if (Pkg == P || List->IsFlag(P,pkgOrderList::Configured) == true ||
+ Cache[P].InstallVer == 0 || (P.CurrentVer() == Cache[P].InstallVer &&
+ (Cache[Pkg].iFlags & pkgDepCache::ReInstall) != pkgDepCache::ReInstall))
+ continue;
+ SmartConfigure(P);
+ }
+
// Sanity Check
if (List->IsFlag(Pkg,pkgOrderList::Configured) == false)
- return _error->Error(_("Could not perform immediate configuration on '%s'."
+ return _error->Error(_("Could not perform immediate configuration on '%s'. "
"Please see man 5 apt.conf under APT::Immediate-Configure for details. (%d)"),Pkg.Name(),1);
return true;
+}
+
+// PM::VerifyConfigure - Check configuration of dependancies /*{{{*/
+// ---------------------------------------------------------------------
+/* This routine checks that all a packages dependancies have been
+ configured, before it is going to be configured. If this gives a warning
+ on a virtual package, it means that the package thats providing it is not
+ configured*/
+bool pkgPackageManager::VerifyConfigure(PkgIterator Pkg, pkgOrderList &OList)
+{
+ // If this is true at the end, then the package should not be configured
+ bool error=true;
+ // This holds the the OR status of the previous dependancy
+ bool previousOr=false;
+
+ // First iterate through the dependancies of Pkg
+ for (DepIterator D = Cache[Pkg].InstVerIter(Cache).DependsList(); D.end() == false; D++)
+ {
+
+ /* If the dependancy is of type Depends or PreDepends, we need to check it, but only if it is going to be
+ configured at some point */
+ if (D->Type == pkgCache::Dep::Depends || D->Type == pkgCache::Dep::PreDepends) {
+
+ /* If the previous package and this package are OR dependancies, and the previous package satisfied the dependancy
+ then skip this dependancy as it is not relevent, this will repeat for the next package if the situation is the
+ same */
+ if (previousOr && !error) { // As error has not been reset, this refers to the previous dependancy
+ previousOr = (D->CompareOp & pkgCache::Dep::Or) == pkgCache::Dep::Or;
+ continue;
+ }
+
+ // Reset error
+ error = true;
+
+ // Check thorugh all possible versions of this dependancy (D)
+ SPtrArray<Version *> VList = D.AllTargets();
+ for (Version **I = VList; *I != 0; I++)
+ {
+ VerIterator DepVer(Cache,*I);
+ PkgIterator DepPkg = DepVer.ParentPkg();
+ VerIterator DepInstallVer(Cache,Cache[DepPkg].InstallVer);
+
+ if (DepPkg.CurrentVer() == DepVer && !List->IsFlag(DepPkg,pkgOrderList::UnPacked)) {
+ clog << "Version " << DepPkg.CurrentVer() << " is installed on the system, satifying this dependancy" << endl;
+ error=false;
+ break;
+ }
+
+ if (Cache[DepPkg].InstallVer == DepVer &&
+ (List->IsFlag(DepPkg,pkgOrderList::Configured) || OList.IsFlag(DepPkg,pkgOrderList::InList))) {
+ clog << "Version " << DepInstallVer.VerStr() << " is going to be installed on the system, satifying this dependancy" << endl;
+ error=false;
+ break;
+ }
+ }
+
+ /* Only worry here if this package is a OR with the next, as even though this package does not satisfy the OR
+ the next one might */
+ if (error && !((D->CompareOp & pkgCache::Dep::Or) == pkgCache::Dep::Or)) {
+ _error->Error("Package %s should not be configured because package %s is not configured",Pkg.Name(),D.TargetPkg().Name());
+ return false;
+ /* If the previous package is a OR but not this package, but there is still an error then fail as it will not
+ be satisfied */
+ } else if (error && previousOr && !((D->CompareOp & pkgCache::Dep::Or) == pkgCache::Dep::Or)) {
+ _error->Error("Package %s should not be configured because package %s (or any alternatives) are not configured",Pkg.Name(),D.TargetPkg().Name());
+ return false;
+ }
+
+ previousOr = (D->CompareOp & pkgCache::Dep::Or) == pkgCache::Dep::Or;
+ } else {
+ previousOr=false;
+ }
+ }
+ return true;
+}
+
+// PM::VerifyAndConfigure - Check configuration of dependancies /*{{{*/
+// ---------------------------------------------------------------------
+/* This routine verifies if a package can be configured and if so
+ configures it */
+bool pkgPackageManager::VerifyAndConfigure(PkgIterator Pkg, pkgOrderList &OList)
+{
+ if (VerifyConfigure(Pkg, OList))
+ return Configure(Pkg);
+ else
+ return false;
+
}
/*}}}*/
// PM::DepAdd - Add all dependents to the oder list /*{{{*/
return true;
if (List->IsFlag(Pkg,pkgOrderList::UnPacked) == false)
return false;
+
+ if (Debug)
+ std::clog << OutputInDepth(Depth) << "DepAdd: " << Pkg.Name() << std::endl;
// Put the package on the list
OList.push_back(Pkg);
if (Bad == true)
{
+ if (Debug)
+ std::clog << OutputInDepth(Depth) << "DepAdd FAILS on: " << Pkg.Name() << std::endl;
OList.Flag(Pkg,0,pkgOrderList::Added);
OList.pop_back();
Depth--;
List->Flag(Pkg,pkgOrderList::Configured,pkgOrderList::States);
- if (pkgCache::VerIterator(Cache, Cache[Pkg].CandidateVer).Pseudo() == false)
- return Remove(Pkg,(Cache[Pkg].iFlags & pkgDepCache::Purge) == pkgDepCache::Purge);
+ return Remove(Pkg,(Cache[Pkg].iFlags & pkgDepCache::Purge) == pkgDepCache::Purge);
return true;
}
/*}}}*/
// ---------------------------------------------------------------------
/* This performs the task of handling pre-depends. */
bool pkgPackageManager::SmartUnPack(PkgIterator Pkg)
+{
+ return SmartUnPack(Pkg, true);
+}
+bool pkgPackageManager::SmartUnPack(PkgIterator Pkg, bool const Immediate)
{
// Check if it is already unpacked
if (Pkg.State() == pkgCache::PkgIterator::NeedsConfigure &&
Cache[Pkg].Keep() == true)
{
List->Flag(Pkg,pkgOrderList::UnPacked,pkgOrderList::States);
- if (List->IsFlag(Pkg,pkgOrderList::Immediate) == true)
+ if (Immediate == true &&
+ List->IsFlag(Pkg,pkgOrderList::Immediate) == true)
if (SmartConfigure(Pkg) == false)
- return _error->Error(_("Could not perform immediate configuration on already unpacked '%s'."
+ return _error->Error(_("Could not perform immediate configuration on already unpacked '%s'. "
"Please see man 5 apt.conf under APT::Immediate-Configure for details."),Pkg.Name());
return true;
}
+ VerIterator const instVer = Cache[Pkg].InstVerIter(Cache);
+
/* See if this packages install version has any predependencies
that are not met by 'now' packages. */
- for (DepIterator D = Cache[Pkg].InstVerIter(Cache).DependsList();
+ for (DepIterator D = instVer.DependsList();
D.end() == false; )
{
// Compute a single dependency element (glob or)
// Check for reverse conflicts.
if (CheckRConflicts(Pkg,Pkg.RevDependsList(),
- Cache[Pkg].InstVerIter(Cache).VerStr()) == false)
+ instVer.VerStr()) == false)
return false;
- for (PrvIterator P = Cache[Pkg].InstVerIter(Cache).ProvidesList();
+ for (PrvIterator P = instVer.ProvidesList();
P.end() == false; P++)
CheckRConflicts(Pkg,P.ParentPkg().RevDependsList(),P.ProvideVersion());
-
- if (pkgCache::VerIterator(Cache, Cache[Pkg].CandidateVer).Pseudo() == false &&
- Install(Pkg,FileNames[Pkg->ID]) == false)
- return false;
-
+
List->Flag(Pkg,pkgOrderList::UnPacked,pkgOrderList::States);
-
+
+ if (instVer->MultiArch == pkgCache::Version::Same)
+ for (PkgIterator P = Pkg.Group().PackageList();
+ P.end() == false; P = Pkg.Group().NextPkg(P))
+ {
+ if (Pkg == P || List->IsFlag(P,pkgOrderList::UnPacked) == true ||
+ Cache[P].InstallVer == 0 || (P.CurrentVer() == Cache[P].InstallVer &&
+ (Cache[Pkg].iFlags & pkgDepCache::ReInstall) != pkgDepCache::ReInstall))
+ continue;
+ SmartUnPack(P, false);
+ }
+
+ if(Install(Pkg,FileNames[Pkg->ID]) == false)
+ return false;
+
// Perform immedate configuration of the package.
- if (List->IsFlag(Pkg,pkgOrderList::Immediate) == true)
+ if (Immediate == true &&
+ List->IsFlag(Pkg,pkgOrderList::Immediate) == true)
if (SmartConfigure(Pkg) == false)
- return _error->Error(_("Could not perform immediate configuration on '%s'."
+ return _error->Error(_("Could not perform immediate configuration on '%s'. "
"Please see man 5 apt.conf under APT::Immediate-Configure for details. (%d)"),Pkg.Name(),2);
return true;
projects / apt.git / blobdiff