<?xml version="1.0" encoding="utf-8" standalone="no"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-
-<!ENTITY % aptent SYSTEM "apt.ent">
-%aptent;
-
-<!ENTITY % aptverbatiment SYSTEM "apt-verbatim.ent">
-%aptverbatiment;
-
+<!ENTITY % aptent SYSTEM "apt.ent"> %aptent;
+<!ENTITY % aptverbatiment SYSTEM "apt-verbatim.ent"> %aptverbatiment;
+<!ENTITY % aptvendor SYSTEM "apt-vendor.ent"> %aptvendor;
]>
<refentry>
</para></listitem>
</varlistentry>
+ <varlistentry><term><option>Build-Profiles</option></term>
+ <listitem><para>
+ List of all build profiles enabled for build-dependency resolution,
+ without the "<literal>profile.</literal>" namespace prefix.
+ By default this list is empty. The <envar>DEB_BUILD_PROFILES</envar>
+ as used by &dpkg-buildpackage; overrides the list notation.
+ </para></listitem>
+ </varlistentry>
+
<varlistentry><term><option>Default-Release</option></term>
<listitem><para>Default release to install packages from if more than one
version is available. Contains release name, codename or release version. Examples: 'stable', 'testing',
<literal>Valid-Until</literal> header, but if they don't or a
stricter value is desired the <literal>Max-ValidTime</literal>
option below can be used.
+ The <option>Check-Valid-Until</option> option of &sources-list; entries should be
+ preferred to disable the check selectively instead of using this global override.
</para></listitem>
</varlistentry>
the earlier date of the two is used as the expiration date.
The default value is <literal>0</literal> which stands for "valid forever".
Archive specific settings can be made by appending the label of the archive
- to the option name.
+ to the option name. Preferably, the same can be achieved for specific
+ &sources-list; entries by using the <option>Valid-Until-Max</option> option there.
</para></listitem>
</varlistentry>
frequently updated archive with a <literal>Valid-Until</literal> header
instead of completely disabling the expiration date checking.
Archive specific settings can and should be used by appending the label of
- the archive to the option name.
+ the archive to the option name. Preferably, the same can be achieved for specific
+ &sources-list; entries by using the <option>Valid-Until-Min</option> option there.
</para></listitem>
</varlistentry>
<para>The setting <literal>Acquire::http::Pipeline-Depth</literal> can be used to
enable HTTP pipelining (RFC 2616 section 8.1.2.2) which can be beneficial e.g. on
high-latency connections. It specifies how many requests are sent in a pipeline.
- Previous APT versions had a default of 10 for this setting, but the default value
- is now 0 (= disabled) to avoid problems with the ever-growing amount of webservers
- and proxies which choose to not conform to the HTTP/1.1 specification.</para>
+ APT tries to detect and workaround misbehaving webservers and proxies at runtime, but
+ if you know that yours does not conform to the HTTP/1.1 specification pipelining can
+ be disabled by setting the value to 0. It is enabled by default with the value 10.</para>
<para><literal>Acquire::http::AllowRedirect</literal> controls whether APT will follow
redirects, which is enabled by default.</para>
<para><literal>Acquire::http::User-Agent</literal> can be used to set a different
User-Agent for the http download method as some proxies allow access for clients
only if the client uses a known identifier.</para>
+
+ <para><literal>Acquire::http::Proxy-Auto-Detect</literal> can be used to
+ specify an external command to discover the http proxy to use. Apt expects
+ the command to output the proxy on stdout in the style
+ <literal>http://proxy:port/</literal>. This will override the
+ generic <literal>Acquire::http::Proxy</literal> but not any specific
+ host proxy configuration set via
+ <literal>Acquire::http::Proxy::$HOST</literal>.
+
+ See the &squid-deb-proxy-client; package for an example implementation that
+ uses avahi. This option takes precedence over the legacy option name
+ <literal>ProxyAutoDetect</literal>.
+ </para>
+
</listitem>
</varlistentry>
</para></listitem>
</varlistentry>
+ <varlistentry><term><option>MaxReleaseFileSize</option></term>
+ <listitem><para>
+ The maximum file size of Release/Release.gpg/InRelease files.
+ The default is 10MB.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry><term><option>AllowInsecureRepositories</option></term>
+ <listitem><para>
+ Allow the update operation to load data files from
+ a repository without a trusted signature. If enabled this
+ option no data files will be loaded and the update
+ operation fails with a error for this source. The default
+ is false for backward compatibility. This will be changed
+ in the future.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry><term><option>AllowDowngradeToInsecureRepositories</option></term>
+ <listitem><para>
+ Allow that a repository that was previously gpg signed to become
+ unsigned durign a update operation. When there is no valid signature
+ of a perviously trusted repository apt will refuse the update. This
+ option can be used to override this protection. You almost certainly
+ never want to enable this. The default is false.
+
+ Note that apt will still consider packages from this source
+ untrusted and warn about them if you try to install
+ them.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry><term><option>Changelogs::URI</option> scope</term>
+ <listitem><para>
+ Acquiring changelogs can only be done if an URI is known from where to get them.
+ Preferable the Release file indicates this in a 'Changelogs' field. If this isn't
+ available the Label/Origin field of the Release file is used to check if a
+ <literal>Acquire::Changelogs::URI::Label::<replaceable>LABEL</replaceable></literal> or
+ <literal>Acquire::Changelogs::URI::Origin::<replaceable>ORIGIN</replaceable></literal> option
+ exists and if so this value is taken. The value in the Release file can be overridden
+ with <literal>Acquire::Changelogs::URI::Override::Label::<replaceable>LABEL</replaceable></literal>
+ or <literal>Acquire::Changelogs::URI::Override::Origin::<replaceable>ORIGIN</replaceable></literal>.
+
+ The value should be a normal URI to a text file, expect that package specific data is
+ replaced with the placeholder <literal>CHANGEPATH</literal>. The
+ value for it is: 1. if the package is from a component (e.g. <literal>main</literal>)
+ this is the first part otherwise it is omitted, 2. the first letter of source package name,
+ expect if the source package name starts with '<literal>lib</literal>' in which case it will
+ be the first four letters. 3. The complete source package name. 4. the complete name again and
+ 5. the source version.
+ The first (if present), second, third and fourth part are separated by a slash ('<literal>/</literal>')
+ and between the fourth and fifth part is an underscore ('<literal>_</literal>').
+
+ The special value '<literal>no</literal>' is available for this option indicating that
+ this source can't be used to acquire changelog files from. Another source will be tried
+ if available in this case.
+ </para></listitem>
+ </varlistentry>
+
</variablelist>
</refsect1>
information, such as the two package caches <literal>srcpkgcache</literal> and
<literal>pkgcache</literal> as well as the location to place downloaded archives,
<literal>Dir::Cache::archives</literal>. Generation of caches can be turned off
- by setting their names to the empty string. This will slow down startup but
- save disk space. It is probably preferable to turn off the pkgcache rather
- than the srcpkgcache. Like <literal>Dir::State</literal> the default
- directory is contained in <literal>Dir::Cache</literal></para>
+ by setting <literal>pkgcache</literal> or <literal>srcpkgcache</literal> to
+ <literal>""</literal>. This will slow down startup but save disk space. It
+ is probably preferable to turn off the pkgcache rather than the srcpkgcache.
+ Like <literal>Dir::State</literal> the default directory is contained in
+ <literal>Dir::Cache</literal></para>
<para><literal>Dir::Etc</literal> contains the location of configuration files,
<literal>sourcelist</literal> gives the location of the sourcelist and
<para>
The configuration item <literal>RootDir</literal> has a special
- meaning. If set, all paths in <literal>Dir::</literal> will be
+ meaning. If set, all paths will be
relative to <literal>RootDir</literal>, <emphasis>even paths that
are specified absolutely</emphasis>. So, for instance, if
<literal>RootDir</literal> is set to
<filename>/var/lib/dpkg/status</filename>, then the status file
will be looked up in
<filename>/tmp/staging/var/lib/dpkg/status</filename>.
+ If you want to prefix only relative paths, set <literal>Dir</literal> instead.
</para>
<para>
install to the commands, one per line on the requested file descriptor, defaulting
to standard input.</para>
- <para>Version 2 of this protocol dumps more information, including the
- protocol version, the APT configuration space and the packages, files
- and versions being changed. Version 3 adds the architecture and <literal>MultiArch</literal>
- flag to each version being dumped.</para>
+ <para>Version 2 of this protocol sends more information through the requested
+ file descriptor: a line with the text <literal>VERSION 2</literal>,
+ the APT configuration space, and a list of package actions with filename
+ and version information.</para>
+
+ <para>Each configuration directive line has the form
+ <literal>key=value</literal>. Special characters (equal signs, newlines,
+ nonprintable characters, quotation marks, and percent signs in
+ <literal>key</literal> and newlines, nonprintable characters, and percent
+ signs in <literal>value</literal>) are %-encoded. Lists are represented
+ by multiple <literal>key::=value</literal> lines with the same key. The
+ configuration section ends with a blank line.</para>
+
+ <para>Package action lines consist of five fields in Version 2: old version, direction
+ of version change (< for upgrades, > for downgrades, = for no
+ change), new version, action. The version fields are "-" for no version
+ at all (for example when installing a package for the first time; no
+ version is treated as earlier than any real version, so that is an
+ upgrade, indicated as <literal>- < 1.23.4</literal>). The action field
+ is "**CONFIGURE**" if the package is being configured, "**REMOVE**" if it
+ is being removed, or the filename of a .deb file if it is being
+ unpacked.</para>
+
+ <para>In Version 3 after each version field follows the architecture
+ of this version, which is "-" if there is no version, and a field showing
+ the MultiArch type "same", foreign", "allowed" or "none". Note that "none"
+ is an incorrect typename which is just kept to remain compatible, it
+ should be read as "no" and users are encouraged to support both.</para>
<para>The version of the protocol to be used for the command
<literal><replaceable>cmd</replaceable></literal> can be chosen by setting
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><option>Debug::RunScripts</option></term>
+ <listitem>
+ <para>
+ Display the external commands that are called by apt hooks.
+ This includes e.g. the config options
+ <literal>DPkg::{Pre,Post}-Invoke</literal> or
+ <literal>APT::Update::{Pre,Post}-Invoke</literal>.
+ </para>
+ </listitem>
+ </varlistentry>
+
<!-- 2009/07/11 Currently used nowhere. The corresponding code
is commented.
<varlistentry>
projects / apt.git / blobdiff