-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:311
-msgid ""
-"<literal>CaInfo</literal> suboption specifies place of file that holds info "
-"about trusted certificates. <literal><host>::CaInfo</literal> is "
-"corresponding per-host option. <literal>Verify-Peer</literal> boolean "
-"suboption determines whether verify server's host certificate against "
-"trusted certificates or not. <literal><host>::Verify-Peer</literal> "
-"is corresponding per-host option. <literal>Verify-Host</literal> boolean "
-"suboption determines whether verify server's hostname or not. <literal><"
-"host>::Verify-Host</literal> is corresponding per-host option. "
-"<literal>SslCert</literal> determines what certificate to use for client "
-"authentication. <literal><host>::SslCert</literal> is corresponding "
-"per-host option. <literal>SslKey</literal> determines what private key to "
-"use for client authentication. <literal><host>::SslKey</literal> is "
-"corresponding per-host option. <literal>SslForceVersion</literal> overrides "
-"default SSL version to use. Can contain 'TLSv1' or 'SSLv3' string. "
-"<literal><host>::SslForceVersion</literal> is corresponding per-host "
-"option."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:329 sources.list.5.xml:150
-msgid "ftp"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:330
-msgid ""
-"FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard "
-"form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host "
-"proxies can also be specified by using the form <literal>ftp::Proxy::<"
-"host></literal> with the special keyword <literal>DIRECT</literal> "
-"meaning to use no proxies. If no one of the above settings is specified, "
-"<envar>ftp_proxy</envar> environment variable will be used. To use a ftp "
-"proxy you will have to set the <literal>ftp::ProxyLogin</literal> script in "
-"the configuration file. This entry specifies the commands to send to tell "
-"the proxy server what to connect to. Please see &configureindex; for an "
-"example of how to do this. The substitution variables available are <literal>"
-"$(PROXY_USER)</literal> <literal>$(PROXY_PASS)</literal> <literal>"
-"$(SITE_USER)</literal> <literal>$(SITE_PASS)</literal> <literal>$(SITE)</"
-"literal> and <literal>$(SITE_PORT)</literal> Each is taken from it's "
-"respective URI component."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:349
-msgid ""
-"Several settings are provided to control passive mode. Generally it is safe "
-"to leave passive mode on, it works in nearly every environment. However "
-"some situations require that passive mode be disabled and port mode ftp used "
-"instead. This can be done globally, for connections that go through a proxy "
-"or for a specific host (See the sample config file for examples)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:356
-msgid ""
-"It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</"
-"envar> environment variable to a http url - see the discussion of the http "
-"method above for syntax. You cannot set this in the configuration file and "
-"it is not recommended to use FTP over HTTP due to its low efficiency."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:361
-msgid ""
-"The setting <literal>ForceExtended</literal> controls the use of RFC2428 "
-"<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is "
-"false, which means these commands are only used if the control connection is "
-"IPv6. Setting this to true forces their use even on IPv4 connections. Note "
-"that most FTP servers do not support RFC2428."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:368 sources.list.5.xml:132
-msgid "cdrom"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:374
-#, no-wrap
-msgid "/cdrom/::Mount \"foo\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:369
-msgid ""
-"CDROM URIs; the only setting for CDROM URIs is the mount point, "
-"<literal>cdrom::Mount</literal> which must be the mount point for the CDROM "
-"drive as specified in <filename>/etc/fstab</filename>. It is possible to "
-"provide alternate mount and unmount commands if your mount point cannot be "
-"listed in the fstab (such as an SMB mount and old mount packages). The "
-"syntax is to put <placeholder type=\"literallayout\" id=\"0\"/> within the "
-"cdrom block. It is important to have the trailing slash. Unmount commands "
-"can be specified using UMount."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:379
-msgid "gpgv"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:380
-msgid ""
-"GPGV URIs; the only option for GPGV URIs is the option to pass additional "
-"parameters to gpgv. <literal>gpgv::Options</literal> Additional options "
-"passed to gpgv."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:385
-msgid "CompressionTypes"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:391
-#, no-wrap
-msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:386
-msgid ""
-"List of compression types which are understood by the acquire methods. "
-"Files like <filename>Packages</filename> can be available in various "
-"compression formats. Per default the acquire methods can decompress "
-"<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
-"command> compressed files, with this setting more formats can be added on "
-"the fly or the used method can be changed. The syntax for this is: "
-"<placeholder type=\"synopsis\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:396
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order:: \"gz\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:399
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:392
-msgid ""
-"Also the <literal>Order</literal> subgroup can be used to define in which "
-"order the acquire system will try to download the compressed files. The "
-"acquire system will try the first and proceed with the next compression type "
-"in this list on error, so to prefer one over the other type simple add the "
-"preferred type at first - not already added default types will be added at "
-"run time to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
-"\"0\"/> can be used to prefer <command>gzip</command> compressed files over "
-"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</"
-"command> should be preferred over <command>gzip</command> and "
-"<command>bzip2</command> the configure setting should look like this "
-"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add "
-"<literal>bz2</literal> explicit to the list as it will be added automatic."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:403
-#, no-wrap
-msgid "Dir::Bin::bzip2 \"/bin/bzip2\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:401
-msgid ""
-"Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</"
-"replaceable></literal> will be checked: If this setting exists the method "
-"will only be used if this file exists, e.g. for the bzip2 method (the "
-"inbuilt) setting is <placeholder type=\"literallayout\" id=\"0\"/> Note also "
-"that list entries specified on the command line will be added at the end of "
-"the list specified in the configuration files, but before the default "
-"entries. To prefer a type in this case over the ones specified in in the "
-"configuration files you can set the option direct - not in list style. This "
-"will not override the defined list, it will only prefix the list with this "
-"type."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:408
-msgid ""
-"While it is possible to add an empty compression type to the order list, but "
-"APT in its current version doesn't understand it correctly and will display "
-"many warnings about not downloaded files - these warnings are most of the "
-"time false negatives. Future versions will maybe include a way to really "
-"prefer uncompressed files to support the usage of local mirrors."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:414
-msgid "Languages"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:415
-msgid ""
-"The Languages subsection controls which <filename>Translation</filename> "
-"files are downloaded and in which order APT tries to display the Description-"
-"Translations. APT will try to display the first available Description in the "
-"Language which is listed at first. Languages can be defined with their short "
-"or long Languagecodes. Note that not all archives provide "
-"<filename>Translation</filename> files for every Language - especially the "
-"long Languagecodes are rare, so please inform you which ones are available "
-"before you set here impossible values."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting>
-#: apt.conf.5.xml:431
-#, no-wrap
-msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:421
-msgid ""
-"The default list includes \"environment\" and \"en\". "
-"\"<literal>environment</literal>\" has a special meaning here: It will be "
-"replaced at runtime with the languagecodes extracted from the "
-"<literal>LC_MESSAGES</literal> environment variable. It will also ensure "
-"that these codes are not included twice in the list. If "
-"<literal>LC_MESSAGES</literal> is set to \"C\" only the "
-"<filename>Translation-en</filename> file (if available) will be used. To "
-"force apt to use no Translation file use the setting <literal>Acquire::"
-"Languages=none</literal>. \"<literal>none</literal>\" is another special "
-"meaning code which will stop the search for a fitting <filename>Translation</"
-"filename> file. This can be used by the system administrator to let APT "
-"know that it should download also this files without actually use them if "
-"the environment doesn't specify this languages. So the following example "
-"configuration will result in the order \"en, de\" in an english and in \"de, "
-"en\" in a german localization. Note that \"fr\" is downloaded, but not used "
-"if APT is not used in a french localization, in such an environment the "
-"order would be \"fr, de, en\". <placeholder type=\"programlisting\" id=\"0"
-"\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:228
-msgid ""
-"The <literal>Acquire</literal> group of options controls the download of "
-"packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:438
-msgid "Directories"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:440
-msgid ""
-"The <literal>Dir::State</literal> section has directories that pertain to "
-"local state information. <literal>lists</literal> is the directory to place "
-"downloaded package lists in and <literal>status</literal> is the name of the "
-"dpkg status file. <literal>preferences</literal> is the name of the APT "
-"preferences file. <literal>Dir::State</literal> contains the default "
-"directory to prefix on all sub items if they do not start with <filename>/</"
-"filename> or <filename>./</filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:447
-msgid ""
-"<literal>Dir::Cache</literal> contains locations pertaining to local cache "
-"information, such as the two package caches <literal>srcpkgcache</literal> "
-"and <literal>pkgcache</literal> as well as the location to place downloaded "
-"archives, <literal>Dir::Cache::archives</literal>. Generation of caches can "
-"be turned off by setting their names to be blank. This will slow down "
-"startup but save disk space. It is probably preferred to turn off the "
-"pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the "
-"default directory is contained in <literal>Dir::Cache</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:456
-msgid ""
-"<literal>Dir::Etc</literal> contains the location of configuration files, "
-"<literal>sourcelist</literal> gives the location of the sourcelist and "
-"<literal>main</literal> is the default configuration file (setting has no "
-"effect, unless it is done from the config file specified by "
-"<envar>APT_CONFIG</envar>)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:462
-msgid ""
-"The <literal>Dir::Parts</literal> setting reads in all the config fragments "
-"in lexical order from the directory specified. After this is done then the "
-"main config file is loaded."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:466
-msgid ""
-"Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::"
-"Bin::Methods</literal> specifies the location of the method handlers and "
-"<literal>gzip</literal>, <literal>bzip2</literal>, <literal>lzma</literal>, "
-"<literal>dpkg</literal>, <literal>apt-get</literal> <literal>dpkg-source</"
-"literal> <literal>dpkg-buildpackage</literal> and <literal>apt-cache</"
-"literal> specify the location of the respective programs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:474
-msgid ""
-"The configuration item <literal>RootDir</literal> has a special meaning. If "
-"set, all paths in <literal>Dir::</literal> will be relative to "
-"<literal>RootDir</literal>, <emphasis>even paths that are specified "
-"absolutely</emphasis>. So, for instance, if <literal>RootDir</literal> is "
-"set to <filename>/tmp/staging</filename> and <literal>Dir::State::status</"
-"literal> is set to <filename>/var/lib/dpkg/status</filename>, then the "
-"status file will be looked up in <filename>/tmp/staging/var/lib/dpkg/status</"
-"filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:487
-msgid "APT in DSelect"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:489
-msgid ""
-"When APT is used as a &dselect; method several configuration directives "
-"control the default behaviour. These are in the <literal>DSelect</literal> "
-"section."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:493
-msgid "Clean"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:494
-msgid ""
-"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto "
-"and never. always and prompt will remove all packages from the cache after "
-"upgrading, prompt (the default) does so conditionally. auto removes only "
-"those packages which are no longer downloadable (replaced with a new version "
-"for instance). pre-auto performs this action before downloading new "
-"packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:503
-msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the install phase."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:507
-msgid "Updateoptions"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:508
-msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the update phase."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:512
-msgid "PromptAfterUpdate"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:513
-msgid ""
-"If true the [U]pdate operation in &dselect; will always prompt to continue. "
-"The default is to prompt only on error."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:519
-msgid "How APT calls dpkg"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:520
-msgid ""
-"Several configuration directives control how APT invokes &dpkg;. These are "
-"in the <literal>DPkg</literal> section."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:525
-msgid ""
-"This is a list of options to pass to dpkg. The options must be specified "
-"using the list notation and each list item is passed as a single argument to "
-"&dpkg;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:530
-msgid "Pre-Invoke"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:530
-msgid "Post-Invoke"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:531
-msgid ""
-"This is a list of shell commands to run before/after invoking &dpkg;. Like "
-"<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
-"fail APT will abort."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:537
-msgid "Pre-Install-Pkgs"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:538
-msgid ""
-"This is a list of shell commands to run before invoking dpkg. Like "
-"<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
-"fail APT will abort. APT will pass to the commands on standard input the "
-"filenames of all .deb files it is going to install, one per line."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:544
-msgid ""
-"Version 2 of this protocol dumps more information, including the protocol "
-"version, the APT configuration space and the packages, files and versions "
-"being changed. Version 2 is enabled by setting <literal>DPkg::Tools::"
-"options::cmd::Version</literal> to 2. <literal>cmd</literal> is a command "
-"given to <literal>Pre-Install-Pkgs</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:551
-msgid "Run-Directory"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:552
-msgid ""
-"APT chdirs to this directory before invoking dpkg, the default is <filename>/"
-"</filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:556
-msgid "Build-options"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:557
-msgid ""
-"These options are passed to &dpkg-buildpackage; when compiling packages, the "
-"default is to disable signing and produce all binaries."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt.conf.5.xml:562
-msgid "dpkg trigger usage (and related options)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:563
-msgid ""
-"APT can call dpkg in a way so it can make aggressive use of triggers over "
-"multiply calls of dpkg. Without further options dpkg will use triggers only "
-"in between his own run. Activating these options can therefore decrease the "
-"time needed to perform the install / upgrade. Note that it is intended to "
-"activate these options per default in the future, but as it changes the way "
-"APT calling dpkg drastically it needs a lot more testing. <emphasis>These "
-"options are therefore currently experimental and should not be used in "
-"productive environments.</emphasis> Also it breaks the progress reporting so "
-"all frontends will currently stay around half (or more) of the time in the "
-"100% state while it actually configures all packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><literallayout>
-#: apt.conf.5.xml:578
-#, no-wrap
-msgid ""
-"DPkg::NoTriggers \"true\";\n"
-"PackageManager::Configure \"smart\";\n"
-"DPkg::ConfigurePending \"true\";\n"
-"DPkg::TriggersPending \"true\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:572
-msgid ""
-"Note that it is not guaranteed that APT will support these options or that "
-"these options will not cause (big) trouble in the future. If you have "
-"understand the current risks and problems with these options, but are brave "
-"enough to help testing them create a new configuration file and test a "
-"combination of options. Please report any bugs, problems and improvements "
-"you encounter and make sure to note which options you have used in your "
-"reports. Asking dpkg for help could also be useful for debugging proposes, "
-"see e.g. <command>dpkg --audit</command>. A defensive option combination "
-"would be <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:584
-msgid "DPkg::NoTriggers"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:585
-msgid ""
-"Add the no triggers flag to all dpkg calls (except the ConfigurePending "
-"call). See &dpkg; if you are interested in what this actually means. In "
-"short: dpkg will not run the triggers when this flag is present unless it is "
-"explicitly called to do so in an extra call. Note that this option exists "
-"(undocumented) also in older apt versions with a slightly different meaning: "
-"Previously these option only append --no-triggers to the configure calls to "
-"dpkg - now apt will add these flag also to the unpack and remove calls."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:592
-msgid "PackageManager::Configure"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:593
-msgid ""
-"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
-"and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default "
-"value and causes APT to configure all packages explicit. The "
-"\"<literal>smart</literal>\" way is it to configure only packages which need "
-"to be configured before another package can be unpacked (Pre-Depends) and "
-"let the rest configure by dpkg with a call generated by the next option. "
-"\"<literal>no</literal>\" on the other hand will not configure anything and "
-"totally rely on dpkg for configuration (which will at the moment fail if a "
-"Pre-Depends is encountered). Setting this option to another than the all "
-"value will implicitly activate also the next option per default as otherwise "
-"the system could end in an unconfigured status which could be unbootable!"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:603
-msgid "DPkg::ConfigurePending"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:604
-msgid ""
-"If this option is set apt will call <command>dpkg --configure --pending</"
-"command> to let dpkg handle all required configurations and triggers. This "
-"option is activated automatic per default if the previous option is not set "
-"to <literal>all</literal>, but deactivating could be useful if you want to "
-"run APT multiple times in a row - e.g. in an installer. In these sceneries "
-"you could deactivate this option in all but the last run."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:610
-msgid "DPkg::TriggersPending"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:611
-msgid ""
-"Useful for <literal>smart</literal> configuration as a package which has "
-"pending triggers is not considered as <literal>installed</literal> and dpkg "
-"treats them as <literal>unpacked</literal> currently which is a dealbreaker "
-"for Pre-Dependencies (see debbugs #526774). Note that this will process all "
-"triggers, not only the triggers needed to configure this package."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:616
-msgid "PackageManager::UnpackAll"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:617
-msgid ""
-"As the configuration can be deferred to be done at the end by dpkg it can be "
-"tried to order the unpack series only by critical needs, e.g. by Pre-"
-"Depends. Default is true and therefore the \"old\" method of ordering in "
-"various steps by everything. While both method were present in earlier APT "
-"versions the <literal>OrderCritical</literal> method was unused, so this "
-"method is very experimental and needs further improvements before becoming "
-"really useful."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:624
-msgid "OrderList::Score::Immediate"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:632
-#, no-wrap
-msgid ""
-"OrderList::Score {\n"
-"\tDelete 500;\n"
-"\tEssential 200;\n"
-"\tImmediate 10;\n"
-"\tPreDepends 50;\n"
-"};"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:625
-msgid ""
-"Essential packages (and there dependencies) should be configured immediately "
-"after unpacking. It will be a good idea to do this quite early in the "
-"upgrade process as these these configure calls require currently also "
-"<literal>DPkg::TriggersPending</literal> which will run quite a few triggers "
-"(which maybe not needed). Essentials get per default a high score but the "
-"immediate flag is relatively low (a package which has a Pre-Depends is "
-"higher rated). These option and the others in the same group can be used to "
-"change the scoring. The following example shows the settings with there "
-"default values. <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:645
-msgid "Periodic and Archives options"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:646
-msgid ""
-"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups "
-"of options configure behavior of apt periodic updates, which is done by "
-"<literal>/etc/cron.daily/apt</literal> script. See header of this script for "
-"the brief documentation of these options."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:654
-msgid "Debug options"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:656
-msgid ""
-"Enabling options in the <literal>Debug::</literal> section will cause "
-"debugging information to be sent to the standard error stream of the program "
-"utilizing the <literal>apt</literal> libraries, or enable special program "
-"modes that are primarily useful for debugging the behavior of <literal>apt</"
-"literal>. Most of these options are not interesting to a normal user, but a "
-"few may be:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:667
-msgid ""
-"<literal>Debug::pkgProblemResolver</literal> enables output about the "
-"decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</"
-"literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:675
-msgid ""
-"<literal>Debug::NoLocking</literal> disables all file locking. This can be "
-"used to run some operations (for instance, <literal>apt-get -s install</"
-"literal>) as a non-root user."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:684
-msgid ""
-"<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each "
-"time that <literal>apt</literal> invokes &dpkg;."
-msgstr ""
-
-#. TODO: provide a
-#. motivating example, except I haven't a clue why you'd want
-#. to do this.
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:692
-msgid ""
-"<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data "
-"in CDROM IDs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:702
-msgid "A full list of debugging options to apt follows."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:707
-#, fuzzy
-msgid "<literal>Debug::Acquire::cdrom</literal>"
-msgstr "a linha <literal>Archive:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:711
-msgid ""
-"Print information related to accessing <literal>cdrom://</literal> sources."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:718
-#, fuzzy
-msgid "<literal>Debug::Acquire::ftp</literal>"
-msgstr "a linha <literal>Archive:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:722
-msgid "Print information related to downloading packages using FTP."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:729
-#, fuzzy
-msgid "<literal>Debug::Acquire::http</literal>"
-msgstr "a linha <literal>Archive:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:733
-msgid "Print information related to downloading packages using HTTP."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:740
-#, fuzzy
-msgid "<literal>Debug::Acquire::https</literal>"
-msgstr "a linha <literal>Archive:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:744
-msgid "Print information related to downloading packages using HTTPS."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:751
-#, fuzzy
-msgid "<literal>Debug::Acquire::gpgv</literal>"
-msgstr "a linha <literal>Archive:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:755
-msgid ""
-"Print information related to verifying cryptographic signatures using "
-"<literal>gpg</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:762
-#, fuzzy
-msgid "<literal>Debug::aptcdrom</literal>"
-msgstr "a linha <literal>Version:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:766
-msgid ""
-"Output information about the process of accessing collections of packages "
-"stored on CD-ROMs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:773
-#, fuzzy
-msgid "<literal>Debug::BuildDeps</literal>"
-msgstr "a linha <literal>Label:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:776
-msgid "Describes the process of resolving build-dependencies in &apt-get;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:783
-#, fuzzy
-msgid "<literal>Debug::Hashes</literal>"
-msgstr "a linha <literal>Label:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:786
-msgid ""
-"Output each cryptographic hash that is generated by the <literal>apt</"
-"literal> libraries."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:793
-#, fuzzy
-msgid "<literal>Debug::IdentCDROM</literal>"
-msgstr "a linha <literal>Label:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:796
-msgid ""
-"Do not include information from <literal>statfs</literal>, namely the number "
-"of used and free blocks on the CD-ROM filesystem, when generating an ID for "
-"a CD-ROM."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:804
-#, fuzzy
-msgid "<literal>Debug::NoLocking</literal>"
-msgstr "a linha <literal>Origin:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:807
-msgid ""
-"Disable all file locking. For instance, this will allow two instances of "
-"<quote><literal>apt-get update</literal></quote> to run at the same time."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:815
-#, fuzzy
-msgid "<literal>Debug::pkgAcquire</literal>"
-msgstr "a linha <literal>Archive:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:819
-msgid "Log when items are added to or removed from the global download queue."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:826
-#, fuzzy
-msgid "<literal>Debug::pkgAcquire::Auth</literal>"
-msgstr "a linha <literal>Archive:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:829
-msgid ""
-"Output status messages and errors related to verifying checksums and "
-"cryptographic signatures of downloaded files."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:836
-#, fuzzy
-msgid "<literal>Debug::pkgAcquire::Diffs</literal>"
-msgstr "a linha <literal>Archive:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:839
-msgid ""
-"Output information about downloading and applying package index list diffs, "
-"and errors relating to package index list diffs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:847
-#, fuzzy
-msgid "<literal>Debug::pkgAcquire::RRed</literal>"
-msgstr "a linha <literal>Archive:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:851
-msgid ""
-"Output information related to patching apt package lists when downloading "
-"index diffs instead of full indices."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:858
-#, fuzzy
-msgid "<literal>Debug::pkgAcquire::Worker</literal>"
-msgstr "a linha <literal>Archive:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:862
-msgid ""
-"Log all interactions with the sub-processes that actually perform downloads."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:869
-msgid "<literal>Debug::pkgAutoRemove</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:873
-msgid ""
-"Log events related to the automatically-installed status of packages and to "
-"the removal of unused packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:880
-msgid "<literal>Debug::pkgDepCache::AutoInstall</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:883
-msgid ""
-"Generate debug messages describing which packages are being automatically "
-"installed to resolve dependencies. This corresponds to the initial auto-"
-"install pass performed in, e.g., <literal>apt-get install</literal>, and not "
-"to the full <literal>apt</literal> dependency resolver; see <literal>Debug::"
-"pkgProblemResolver</literal> for that."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:894
-msgid "<literal>Debug::pkgDepCache::Marker</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:897
-msgid ""
-"Generate debug messages describing which package is marked as keep/install/"
-"remove while the ProblemResolver does his work. Each addition or deletion "
-"may trigger additional actions; they are shown indented two additional space "
-"under the original entry. The format for each line is <literal>MarkKeep</"
-"literal>, <literal>MarkDelete</literal> or <literal>MarkInstall</literal> "
-"followed by <literal>package-name <a.b.c -> d.e.f | x.y.z> (section)"
-"</literal> where <literal>a.b.c</literal> is the current version of the "
-"package, <literal>d.e.f</literal> is the version considered for installation "
-"and <literal>x.y.z</literal> is a newer version, but not considered for "
-"installation (because of a low pin score). The later two can be omitted if "
-"there is none or if it is the same version as the installed. "
-"<literal>section</literal> is the name of the section the package appears in."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:916
-#, fuzzy
-msgid "<literal>Debug::pkgInitConfig</literal>"
-msgstr "a linha <literal>Version:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:919
-msgid "Dump the default configuration to standard error on startup."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:926
-#, fuzzy
-msgid "<literal>Debug::pkgDPkgPM</literal>"
-msgstr "a linha <literal>Package:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:929
-msgid ""
-"When invoking &dpkg;, output the precise command line with which it is being "
-"invoked, with arguments separated by a single space character."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:937
-msgid "<literal>Debug::pkgDPkgProgressReporting</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:940
-msgid ""
-"Output all the data received from &dpkg; on the status file descriptor and "
-"any errors encountered while parsing it."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:947
-#, fuzzy
-msgid "<literal>Debug::pkgOrderList</literal>"
-msgstr "a linha <literal>Origin:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:951
-msgid ""
-"Generate a trace of the algorithm that decides the order in which "
-"<literal>apt</literal> should pass packages to &dpkg;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:959
-#, fuzzy
-msgid "<literal>Debug::pkgPackageManager</literal>"
-msgstr "a linha <literal>Package:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:963
-msgid ""
-"Output status messages tracing the steps performed when invoking &dpkg;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:970
-#, fuzzy
-msgid "<literal>Debug::pkgPolicy</literal>"
-msgstr "a linha <literal>Label:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:974
-msgid "Output the priority of each package list on startup."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:980
-msgid "<literal>Debug::pkgProblemResolver</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:984
-msgid ""
-"Trace the execution of the dependency resolver (this applies only to what "
-"happens when a complex dependency problem is encountered)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:992
-msgid "<literal>Debug::pkgProblemResolver::ShowScores</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:995
-msgid ""
-"Display a list of all installed packages with their calculated score used by "
-"the pkgProblemResolver. The description of the package is the same as "
-"described in <literal>Debug::pkgDepCache::Marker</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:1003
-#, fuzzy
-msgid "<literal>Debug::sourceList</literal>"
-msgstr "a linha <literal>Version:</literal>"
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1007
-msgid ""
-"Print information about the vendors read from <filename>/etc/apt/vendors."
-"list</filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1030
-msgid ""
-"&configureindex; is a configuration file showing example values for all "
-"possible options."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist>
-#: apt.conf.5.xml:1037
-msgid "&file-aptconf;"
-msgstr ""
-
-#. ? reading apt.conf
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1042
-#, fuzzy
-msgid "&apt-cache;, &apt-config;, &apt-preferences;."
-msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;"
-
-#. The last update date
-#. type: Content of: <refentry><refentryinfo>
-#: apt_preferences.5.xml:13
-msgid ""
-"&apt-author.team; &apt-email; &apt-product; <date>16 February 2010</date>"
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refname>
-#: apt_preferences.5.xml:21 apt_preferences.5.xml:28
-#, fuzzy
-msgid "apt_preferences"
-msgstr "apt_preferences"
-
-#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt_preferences.5.xml:29
-#, fuzzy
-msgid "Preference control file for APT"
-msgstr "Arquivo de controle de preferências para o APT"
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:34
-#, fuzzy
-msgid ""
-"The APT preferences file <filename>/etc/apt/preferences</filename> and the "
-"fragment files in the <filename>/etc/apt/preferences.d/</filename> folder "
-"can be used to control which versions of packages will be selected for "
-"installation."
-msgstr ""
-"O arquivo de preferências do APT <filename>/etc/apt/preferences</filename> "
-"pode ser usado para controlar quais versões de pacotes serão selecionadas "
-"para instalação."
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:39
-#, fuzzy
-msgid ""
-"Several versions of a package may be available for installation when the "
-"&sources-list; file contains references to more than one distribution (for "
-"example, <literal>stable</literal> and <literal>testing</literal>). APT "
-"assigns a priority to each version that is available. Subject to dependency "
-"constraints, <command>apt-get</command> selects the version with the highest "
-"priority for installation. The APT preferences file overrides the "
-"priorities that APT assigns to package versions by default, thus giving the "
-"user control over which one is selected for installation."
-msgstr ""
-"Diversas versões de um pacote podem estar disponíveis para instalação quando "
-"o arquivo &sources-list; contém referências para mais de uma distribuição "
-"(por exemplo, <literal>stable</literal> e <literal>testing</literal>). O APT "
-"atribui uma prioridade para cada versão que esteja disponível. Sujeito a "
-"obstáculos de dependências, o <command>apt-get</command> seleciona para "
-"instalação a versão com a maior prioridade. O arquivo de preferências do APT "
-"sobrepoe as prioridades que o APT atribui a cada versão de pacote por "
-"padrão, dando assim ao usuário controle sobre qual versão do pacote é "
-"selecionada para instalação."
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:49
-#, fuzzy
-msgid ""
-"Several instances of the same version of a package may be available when the "
-"&sources-list; file contains references to more than one source. In this "
-"case <command>apt-get</command> downloads the instance listed earliest in "
-"the &sources-list; file. The APT preferences file does not affect the "
-"choice of instance, only the choice of version."
-msgstr ""
-"Diversas instâncias da mesma versão de um pacote pode estar disponíveis "
-"quando o arquivo &sources-list; contém referências a mais de uma fonte. "
-"Nesse caso, o <command>apt-get</command> faz o download da instância listada "
-"antes no arquivo &sources-list; . O arquivo de preferências do APT não afeta "
-"a escolha da instância."
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:56
-msgid ""
-"Preferences are a strong power in the hands of a system administrator but "
-"they can become also their biggest nightmare if used without care! APT will "
-"not questioning the preferences so wrong settings will therefore lead to "
-"uninstallable packages or wrong decisions while upgrading packages. Even "
-"more problems will arise if multiply distribution releases are mixed without "
-"a good understanding of the following paragraphs. Packages included in a "
-"specific release aren't tested in and therefore doesn't always work as "
-"expected in older or newer releases or together with other packages from "
-"different releases. You have been warned."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:67
-msgid ""
-"Note that the files in the <filename>/etc/apt/preferences.d</filename> "
-"directory are parsed in alphanumeric ascending order and need to obey the "
-"following naming convention: The files have no or \"<literal>pref</literal>"
-"\" as filename extension and which only contain alphanumeric, hyphen (-), "
-"underscore (_) and period (.) characters - otherwise they will be silently "
-"ignored."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:74
-#, fuzzy
-msgid "APT's Default Priority Assignments"
-msgstr "Atribuições de Prioridade Padrão do APT"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:89
-#, fuzzy, no-wrap
-msgid "<command>apt-get install -t testing <replaceable>some-package</replaceable></command>\n"
-msgstr ""
-"<programlisting>\n"
-"<command>apt-get install -t testing <replaceable>algum-pacote</replaceable></command>\n"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:92
-#, fuzzy, no-wrap
-msgid "APT::Default-Release \"stable\";\n"
-msgstr ""
-"<programlisting>\n"
-"APT::Default-Release \"stable\";\n"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:76
-#, fuzzy
-msgid ""
-"If there is no preferences file or if there is no entry in the file that "
-"applies to a particular version then the priority assigned to that version "
-"is the priority of the distribution to which that version belongs. It is "
-"possible to single out a distribution, \"the target release\", which "
-"receives a higher priority than other distributions do by default. The "
-"target release can be set on the <command>apt-get</command> command line or "
-"in the APT configuration file <filename>/etc/apt/apt.conf</filename>. Note "
-"that this has precedence over any general priority you set in the <filename>/"
-"etc/apt/preferences</filename> file described later, but not over "
-"specifically pinned packages. For example, <placeholder type="
-"\"programlisting\" id=\"0\"/> <placeholder type=\"programlisting\" id=\"1\"/>"
-msgstr ""
-"Caso não exista um arquivo de preferências ou caso não exista uma entrada no "
-"arquivo que se aplique a uma instância em particular, a prioridade atribuída "
-"a essa instância é a prioridade da distribuição para a qual a instância "
-"pertence. É possível selecionar uma distribuição, conhecida como \"a versão "
-"alvo\" (the target release), que recebe uma prioridade maior do que as "
-"outras distribuições. A versão alvo pode ser definida na linha de comando do "
-"<command>apt-get</command> ou no arquivo de configuração do APT <filename>/"
-"etc/apt/apt.conf</filename>. Por exemplo,"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:101
-#, fuzzy
-msgid "priority 100"
-msgstr "prioridade 100"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:102
-#, fuzzy
-msgid "to the version that is already installed (if any)."
-msgstr "para a instância que já esteja instalada (caso exista)."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:106
-#, fuzzy
-msgid "priority 500"
-msgstr "prioridade 500"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:107
-#, fuzzy
-msgid ""
-"to the versions that are not installed and do not belong to the target "
-"release."
-msgstr ""
-"para as instâncias que não estã instaladas e que não pertencem a versão alvo."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:111
-#, fuzzy
-msgid "priority 990"
-msgstr "prioridade 990"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:112
-#, fuzzy
-msgid ""
-"to the versions that are not installed and belong to the target release."
-msgstr ""
-"para as instâncias que não estejam instaladas e pertençam a versão alvo."
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:96
-#, fuzzy
-msgid ""
-"If the target release has been specified then APT uses the following "
-"algorithm to set the priorities of the versions of a package. Assign: "
-"<placeholder type=\"variablelist\" id=\"0\"/>"
-msgstr ""
-"Caso uma versão alvo tenha sido especificada o APT usará o seguinte "
-"algoritmo para definir as prioridades das instâncias de um pacote. "
-"Atribuirá :"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:117
-#, fuzzy
-msgid ""
-"If the target release has not been specified then APT simply assigns "
-"priority 100 to all installed package versions and priority 500 to all "
-"uninstalled package versions."
-msgstr ""
-"Caso nenhuma versão alvo tenha sido especificada, o APT simplesmente irá "
-"atribuir a prioridade 100 para todas as instâncias de pacotes instaladas e a "
-"prioridade 500 para todas as instâncias de pacotes não instaladas."
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:121
-#, fuzzy
-msgid ""
-"APT then applies the following rules, listed in order of precedence, to "
-"determine which version of a package to install."
-msgstr ""
-"O APT aplica as regras a seguir, listadas em ordem de precedência, para "
-"determinar qual instância de um pacote instalar."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:124
-#, fuzzy
-msgid ""
-"Never downgrade unless the priority of an available version exceeds 1000. "
-"(\"Downgrading\" is installing a less recent version of a package in place "
-"of a more recent version. Note that none of APT's default priorities "
-"exceeds 1000; such high priorities can only be set in the preferences file. "
-"Note also that downgrading a package can be risky.)"
-msgstr ""
-"Nunca faz um downgrade a menos que a prioridade de uma instância disponível "
-"exceda 1000. (Fazer um \"downgrade\" é instalar uma versão menos recente de "
-"um pacote no lugar de uma versão mais recente. Note que nenhuma das "
-"prioridades padrão do APT excede 1000; prioridades altas como essa podem ser "
-"definidas somente no arquivo de preferências. Note também que fazer um "
-"\"downgrade\" pode ser arriscado.)"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:130
-#, fuzzy
-msgid "Install the highest priority version."
-msgstr "Instala a instância de prioridade mais alta."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:131
-#, fuzzy
-msgid ""
-"If two or more versions have the same priority, install the most recent one "
-"(that is, the one with the higher version number)."
-msgstr ""
-"Caso duas ou mais instâncias possuam a mesma prioridade, instala a instância "
-"mais recente (ou seja, aquela com o maior número de versão)."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:134
-#, fuzzy
-msgid ""
-"If two or more versions have the same priority and version number but either "
-"the packages differ in some of their metadata or the <literal>--reinstall</"
-"literal> option is given, install the uninstalled one."
-msgstr ""
-"Caso duas ou mais instâncias possuam a mesma prioridade e número de versão "
-"mas os pacotes sejam diferentes em alguns de seus metadados ou a opção "
-"<literal>--reinstall</literal> seja fornecida, instala aquela desinstalada."
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:140
-#, fuzzy
-msgid ""
-"In a typical situation, the installed version of a package (priority 100) "
-"is not as recent as one of the versions available from the sources listed in "
-"the &sources-list; file (priority 500 or 990). Then the package will be "
-"upgraded when <command>apt-get install <replaceable>some-package</"
-"replaceable></command> or <command>apt-get upgrade</command> is executed."
-msgstr ""
-"Em uma situação típica, a instância instalada de um pacote (prioridade 100) "
-"não é tão recente quanto uma das versões disponíveis nas fontes listadas no "
-"arquivo &sources-list; (prioridade 500 ou 990). Então o pacote será "
-"atualizado quando os comandos <command>apt-get install <replaceable>algum-"
-"pacote</replaceable></command> ou <command>apt-get dist-upgrade</command> "
-"forem executados."
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:147
-#, fuzzy
-msgid ""
-"More rarely, the installed version of a package is <emphasis>more</emphasis> "
-"recent than any of the other available versions. The package will not be "
-"downgraded when <command>apt-get install <replaceable>some-package</"
-"replaceable></command> or <command>apt-get upgrade</command> is executed."
-msgstr ""
-"Mais raramente, a versão instalada de um pacote é <emphasis>mais</emphasis> "
-"recente do que qualquer uma das outras versões disponíveis. O dowgrade do "
-"pacote não será feito quando os comandos <command>apt-get install "
-"<replaceable>algum-pacote</replaceable></command> ou <command>apt-get "
-"upgrade</command> forem executados."
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:152
-#, fuzzy
-msgid ""
-"Sometimes the installed version of a package is more recent than the version "
-"belonging to the target release, but not as recent as a version belonging to "
-"some other distribution. Such a package will indeed be upgraded when "
-"<command>apt-get install <replaceable>some-package</replaceable></command> "
-"or <command>apt-get upgrade</command> is executed, because at least "
-"<emphasis>one</emphasis> of the available versions has a higher priority "
-"than the installed version."
-msgstr ""
-"Algumas vezes a versão instalada de um pacote é mais recente que a versão "
-"que pertence a versão alvo, mas não tão recente quanto a versão que pertence "
-"a alguma outra distribuição. Um pacote como esse será na verdade atualizado "
-"quando os comandos <command>apt-get install <replaceable>algum-pacote</"
-"replaceable></command> ou <command>apt-get upgrade</command> forem "
-"executados, devido a pelo menos <emphasis>uma</emphasis> das versões "
-"disponíveis possuir uma prioridade maior do que a versão instalada."
-
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:161
-#, fuzzy
-msgid "The Effect of APT Preferences"
-msgstr "O Efeito das Preferências do APT"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:163
-#, fuzzy
-msgid ""
-"The APT preferences file allows the system administrator to control the "
-"assignment of priorities. The file consists of one or more multi-line "
-"records separated by blank lines. Records can have one of two forms, a "
-"specific form and a general form."
-msgstr ""
-"O arquivo de preferências do APT permite ao administrador do sistema "
-"personalizar prioridades. O arquivo consiste de um ou mais registros de "
-"múltiplas linhas separados por linhas em branco. Registros podem possuir uma "
-"das duas formas, uma forma específica e uma forma geral."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:169
-#, fuzzy
-msgid ""
-"The specific form assigns a priority (a \"Pin-Priority\") to one or more "
-"specified packages and specified version or version range. For example, the "
-"following record assigns a high priority to all versions of the "
-"<filename>perl</filename> package whose version number begins with "
-"\"<literal>5.8</literal>\". Multiple packages can be separated by spaces."
-msgstr ""
-"A forma específica atribui uma uma prioridade (uma \"Pin-Priority\") para um "
-"pacote e versão ou faixa de versão especificados. Por exemplo, o registro a "
-"seguir atribui uma prioridade alta para todas as versões do pacote "
-"<filename>perl</filename> os quais tenham seus números de versão iniciando "
-"com \"<literal>5.8</literal>\"."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:176
-#, fuzzy, no-wrap
-msgid ""
-"Package: perl\n"
-"Pin: version 5.8*\n"
-"Pin-Priority: 1001\n"
-msgstr ""
-"<programlisting>\n"
-"Package: perl\n"
-"Pin: version 5.8*\n"
-"Pin-Priority: 1001\n"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:182
-#, fuzzy
-msgid ""
-"The general form assigns a priority to all of the package versions in a "
-"given distribution (that is, to all the versions of packages that are listed "
-"in a certain <filename>Release</filename> file) or to all of the package "
-"versions coming from a particular Internet site, as identified by the site's "
-"fully qualified domain name."
-msgstr ""
-"O forma geral atribui uma prioridade para todas as versões de pacotes em uma "
-"dada distribuição (isto é, para toda as versões de pacotes que estejam em um "
-"certo arquivo <filename>Release</filename>) ou para todas as versões de "
-"pacotes que provenientes de um site Internet em particular, como "
-"identificado pelo nome de domínio totalmente qualificado do site Internet."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:188
-#, fuzzy
-msgid ""
-"This general-form entry in the APT preferences file applies only to groups "
-"of packages. For example, the following record assigns a high priority to "
-"all package versions available from the local site."
-msgstr ""
-"Essa entrada de forma geral no arquivo de preferências do APT aplica-se "
-"somente a grupos de pacotes. Por exemplo, o registro a seguir faz com que o "
-"APT atribua uma prioridade alta para todas as versões de pacotes disponíveis "
-"no site local."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:193
-#, fuzzy, no-wrap
-msgid ""
-"Package: *\n"
-"Pin: origin \"\"\n"
-"Pin-Priority: 999\n"
-msgstr ""
-"<programlisting>\n"
-"Package: *\n"
-"Pin: origin \"\"\n"
-"Pin-Priority: 999\n"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:198
-#, fuzzy
-msgid ""
-"A note of caution: the keyword used here is \"<literal>origin</literal>\". "
-"This should not be confused with the Origin of a distribution as specified "
-"in a <filename>Release</filename> file. What follows the \"Origin:\" tag in "
-"a <filename>Release</filename> file is not an Internet address but an author "
-"or vendor name, such as \"Debian\" or \"Ximian\"."
-msgstr ""
-"Uma nota de aviso : a palavra-chave usada aqui é \"<literal>origin</literal>"
-"\". Esta palavra não deve ser confundida com a origem (\"Origin:\") de uma "
-"distribuição como especificado em um arquivo <filename>Release</filename>. O "
-"que segue a tag \"Origin:\" em um arquivo <filename>Release</filename> não é "
-"um endereço de site Internet mas sim nome de autor ou distribuidor (vendor), "
-"como \"Debian\" ou \"Ximian\"."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:204
-#, fuzzy
-msgid ""
-"The following record assigns a low priority to all package versions "
-"belonging to any distribution whose Archive name is \"<literal>unstable</"
-"literal>\"."
-msgstr ""
-"O registro a seguir atribui uma prioridade baixa para todas as versões de "
-"pacote que pertençam a qualquer distribuição cujo nome do Repositório seja "
-"\"<literal>unstable</literal>\"."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:208
-#, fuzzy, no-wrap
-msgid ""
-"Package: *\n"
-"Pin: release a=unstable\n"
-"Pin-Priority: 50\n"
-msgstr ""
-"<programlisting>\n"
-"Package: *\n"
-"Pin: release a=unstable\n"
-"Pin-Priority: 50\n"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:213
-#, fuzzy
-msgid ""
-"The following record assigns a high priority to all package versions "
-"belonging to any distribution whose Codename is \"<literal>squeeze</literal>"
-"\"."
-msgstr ""
-"O registro a seguir atribui uma prioridade baixa para todas as versões de "
-"pacote que pertençam a qualquer distribuição cujo nome do Repositório seja "
-"\"<literal>unstable</literal>\"."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:217
-#, fuzzy, no-wrap
-msgid ""
-"Package: *\n"
-"Pin: release n=squeeze\n"
-"Pin-Priority: 900\n"
-msgstr ""
-"<programlisting>\n"
-"Package: *\n"
-"Pin: release a=unstable\n"
-"Pin-Priority: 50\n"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:222
-#, fuzzy
-msgid ""
-"The following record assigns a high priority to all package versions "
-"belonging to any release whose Archive name is \"<literal>stable</literal>\" "
-"and whose release Version number is \"<literal>3.0</literal>\"."
-msgstr ""
-"O registro a seguir atribui uma prioridade alta para todas as versões de "
-"pacotes que pertençam a qualquer versão cujo nome do Repositório seja "
-"\"<literal>stable</literal>\" e cujo número de versão seja \"<literal>3.0</"
-"literal>\"."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:227
-#, fuzzy, no-wrap
-msgid ""
-"Package: *\n"
-"Pin: release a=stable, v=3.0\n"
-"Pin-Priority: 500\n"
-msgstr ""
-"<programlisting>\n"
-"Package: *\n"
-"Pin: release a=unstable, v=3.0\n"
-"Pin-Priority: 50\n"
-
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:238
-#, fuzzy
-msgid "How APT Interprets Priorities"
-msgstr "Como o APT Interpreta Prioridades"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:246
-#, fuzzy
-msgid "P > 1000"
-msgstr "P > 1000"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:247
-#, fuzzy
-msgid ""
-"causes a version to be installed even if this constitutes a downgrade of the "
-"package"
-msgstr ""
-"faz com que uma instância seja instalada mesmo caso isso constitua um "
-"dowgrade do pacote"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:251
-#, fuzzy
-msgid "990 < P <=1000"
-msgstr "990 < P <=1000"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:252
-#, fuzzy
-msgid ""
-"causes a version to be installed even if it does not come from the target "
-"release, unless the installed version is more recent"
-msgstr ""
-"faz com que uma versão seja instalada mesmo caso a mesma não venha de uma "
-"versão alvo, a menos que a versão instalada seja mais recente"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:257
-#, fuzzy
-msgid "500 < P <=990"
-msgstr "500 < P <=990"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:258
-#, fuzzy
-msgid ""
-"causes a version to be installed unless there is a version available "
-"belonging to the target release or the installed version is more recent"
-msgstr ""
-"faz com que uma versão seja instalada a menos que exista uma versão "
-"disponível pertencente a versão alvo ou a versão instalada seja mais recente"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:263
-#, fuzzy
-msgid "100 < P <=500"
-msgstr "100 < P <=500"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:264
-#, fuzzy
-msgid ""
-"causes a version to be installed unless there is a version available "
-"belonging to some other distribution or the installed version is more recent"
-msgstr ""
-"faz com que uma versão seja instalada a menos que exista uma versão "
-"disponível pertencente a alguma outra distribuição ou a versão instalada "
-"seja mais recente"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:269
-#, fuzzy
-msgid "0 < P <=100"
-msgstr "0 <= P <=100"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:270
-#, fuzzy
-msgid ""
-"causes a version to be installed only if there is no installed version of "
-"the package"
-msgstr ""
-"faz com que uma versão seja instalada somente caso não exista uma versão "
-"instalada do pacote"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:274
-#, fuzzy
-msgid "P < 0"
-msgstr "P < 0"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:275
-#, fuzzy
-msgid "prevents the version from being installed"
-msgstr "impede a versão de ser instalada"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:241
-#, fuzzy
-msgid ""
-"Priorities (P) assigned in the APT preferences file must be positive or "
-"negative integers. They are interpreted as follows (roughly speaking): "
-"<placeholder type=\"variablelist\" id=\"0\"/>"
-msgstr ""
-"Prioridades (P) atribuídas no arquivo de preferências do APT devem ser "
-"números inteiros positivos ou negativos. Eles são interpretados como a "
-"seguir (a grosso modo):"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:280
-#, fuzzy
-msgid ""
-"If any specific-form records match an available package version then the "
-"first such record determines the priority of the package version. Failing "
-"that, if any general-form records match an available package version then "
-"the first such record determines the priority of the package version."
-msgstr ""
-"Caso um dos registro de forma específica descritos acima case (match) com "
-"uma versão disponível do pacote então o primeiro desses registros "
-"encontrados determinará a prioridade da versão do pacote. Na falha desse "
-"cenário, caso quaisquer registros de forma genérica casem (match) com uma "
-"versão do pacote disponível então o primeiro desses registros encontrado "
-"determinará a prioridade da versão do pacote."
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:286
-#, fuzzy
-msgid ""
-"For example, suppose the APT preferences file contains the three records "
-"presented earlier:"
-msgstr ""
-"Por exemplo, suponha que o arquivo de preferências do APT contenha os três "
-"registros apresentados anteriormente :"
-
-#. type: Content of: <refentry><refsect1><refsect2><programlisting>
-#: apt_preferences.5.xml:290
-#, fuzzy, no-wrap
-msgid ""
-"Package: perl\n"
-"Pin: version 5.8*\n"
-"Pin-Priority: 1001\n"
-"\n"
-"Package: *\n"
-"Pin: origin \"\"\n"
-"Pin-Priority: 999\n"
-"\n"
-"Package: *\n"
-"Pin: release unstable\n"
-"Pin-Priority: 50\n"
-msgstr ""
-"<programlisting>\n"
-"Package: perl\n"
-"Pin: version 5.8*\n"
-"Pin-Priority: 1001\n"
-"\n"
-"Package: *\n"
-"Pin: origin \"\"\n"
-"Pin-Priority: 999\n"
-"\n"
-"Package: *\n"
-"Pin: release unstable\n"
-"Pin-Priority: 50\n"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:303
-msgid "Then:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:305
-#, fuzzy
-msgid ""
-"The most recent available version of the <literal>perl</literal> package "
-"will be installed, so long as that version's version number begins with "
-"\"<literal>5.8</literal>\". If <emphasis>any</emphasis> 5.8* version of "
-"<literal>perl</literal> is available and the installed version is 5.9*, then "
-"<literal>perl</literal> will be downgraded."
-msgstr ""
-"A versão mais recente disponível do pacote <literal>perl</literal> será "
-"instalado, contanto que esse número de versão da versão inicie com "
-"\"<literal>5.8</literal>\". Caso <emphasis>qualquer</emphasis> versão 5.8* "
-"de <literal>perl</literal> esteja disponível e a versão instalada seja 5.9*, "
-"será feito um downgrade do <literal>perl</literal>."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:310
-#, fuzzy
-msgid ""
-"A version of any package other than <literal>perl</literal> that is "
-"available from the local system has priority over other versions, even "
-"versions belonging to the target release."
-msgstr ""
-"Uma versão de qualquer pacote diferente de <literal>perl</literal> que "
-"esteja disponível no sistema local possui prioridade sobre outras versões, "
-"mesmo versões pertencentes a versão alvo."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:314
-#, fuzzy
-msgid ""
-"A version of a package whose origin is not the local system but some other "
-"site listed in &sources-list; and which belongs to an <literal>unstable</"
-"literal> distribution is only installed if it is selected for installation "
-"and no version of the package is already installed."
-msgstr ""
-"Uma versão de um pacote cuja origem não seja o sistema local mas sim algum "
-"outro site listado no arquivo &sources-list; e que pertença a uma "
-"distribuição <literal>unstable</literal> é instalada somente caso a mesma "
-"seja selecionada para instalação e nenhuma versão do pacote já esteja "
-"instalada."
-
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:324
-#, fuzzy
-msgid "Determination of Package Version and Distribution Properties"
-msgstr "Determinação da Versão do Pacote e Propriedades da Distribuição"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:326
-#, fuzzy
-msgid ""
-"The locations listed in the &sources-list; file should provide "
-"<filename>Packages</filename> and <filename>Release</filename> files to "
-"describe the packages available at that location."
-msgstr ""
-"As localidades listadas em um arquivo &sources-list; devem fornecer arquivos "
-"<filename>Packages</filename> e <filename>Release</filename> para descrever "
-"os pacotes disponíveis nessas localidades."
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:338
-#, fuzzy
-msgid "the <literal>Package:</literal> line"
-msgstr "a linha <literal>Package:</literal>"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:339
-#, fuzzy
-msgid "gives the package name"
-msgstr "informa o nome do pacote"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:342 apt_preferences.5.xml:392
-#, fuzzy
-msgid "the <literal>Version:</literal> line"
-msgstr "a linha <literal>Version:</literal>"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:343
-#, fuzzy
-msgid "gives the version number for the named package"
-msgstr "informa o número de versão do pacote"
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:330
-#, fuzzy
-msgid ""
-"The <filename>Packages</filename> file is normally found in the directory "
-"<filename>.../dists/<replaceable>dist-name</replaceable>/"
-"<replaceable>component</replaceable>/<replaceable>arch</replaceable></"
-"filename>: for example, <filename>.../dists/stable/main/binary-i386/"
-"Packages</filename>. It consists of a series of multi-line records, one for "
-"each package available in that directory. Only two lines in each record are "
-"relevant for setting APT priorities: <placeholder type=\"variablelist\" id="
-"\"0\"/>"
-msgstr ""
-"O arquivo <filename>Packages</filename> é normalmente encontrado no "
-"diretório <filename>.../dists/<replaceable>nome-distribuição</replaceable>/"
-"<replaceable>componente</replaceable>/<replaceable>arquitetura</"
-"replaceable></filename> : por exemplo, <filename>.../dists/stable/main/"
-"binary-i386/Packages</filename>. O arquivo consiste de uma série de "
-"registros de múltiplas linhas, uma para cada pacote disponível no diretório. "
-"Somente duas linhas em cada registro são relevantes para definir prioridades "
-"do APT :"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:359
-#, fuzzy
-msgid "the <literal>Archive:</literal> or <literal>Suite:</literal> line"
-msgstr "a linha <literal>Archive:</literal>"
-
-#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:360
-#, fuzzy
projects / apt.git / blobdiff