-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:386
-msgid ""
-"List of compression types which are understood by the acquire methods. "
-"Files like <filename>Packages</filename> can be available in various "
-"compression formats. Per default the acquire methods can decompress "
-"<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
-"command> compressed files, with this setting more formats can be added on "
-"the fly or the used method can be changed. The syntax for this is: "
-"<placeholder type=\"synopsis\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:396
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order:: \"gz\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:399
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:392
-msgid ""
-"Also the <literal>Order</literal> subgroup can be used to define in which "
-"order the acquire system will try to download the compressed files. The "
-"acquire system will try the first and proceed with the next compression type "
-"in this list on error, so to prefer one over the other type simple add the "
-"preferred type at first - not already added default types will be added at "
-"run time to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
-"\"0\"/> can be used to prefer <command>gzip</command> compressed files over "
-"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</"
-"command> should be preferred over <command>gzip</command> and "
-"<command>bzip2</command> the configure setting should look like this "
-"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add "
-"<literal>bz2</literal> explicit to the list as it will be added automatic."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:403
-#, no-wrap
-msgid "Dir::Bin::bzip2 \"/bin/bzip2\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:401
-msgid ""
-"Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</"
-"replaceable></literal> will be checked: If this setting exists the method "
-"will only be used if this file exists, e.g. for the bzip2 method (the "
-"inbuilt) setting is <placeholder type=\"literallayout\" id=\"0\"/> Note also "
-"that list entries specified on the command line will be added at the end of "
-"the list specified in the configuration files, but before the default "
-"entries. To prefer a type in this case over the ones specified in in the "
-"configuration files you can set the option direct - not in list style. This "
-"will not override the defined list, it will only prefix the list with this "
-"type."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:408
-msgid ""
-"While it is possible to add an empty compression type to the order list, but "
-"APT in its current version doesn't understand it correctly and will display "
-"many warnings about not downloaded files - these warnings are most of the "
-"time false negatives. Future versions will maybe include a way to really "
-"prefer uncompressed files to support the usage of local mirrors."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:414
-msgid "Languages"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:415
-msgid ""
-"The Languages subsection controls which <filename>Translation</filename> "
-"files are downloaded and in which order APT tries to display the Description-"
-"Translations. APT will try to display the first available Description in the "
-"Language which is listed at first. Languages can be defined with their short "
-"or long Languagecodes. Note that not all archives provide "
-"<filename>Translation</filename> files for every Language - especially the "
-"long Languagecodes are rare, so please inform you which ones are available "
-"before you set here impossible values."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting>
-#: apt.conf.5.xml:431
-#, no-wrap
-msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:421
-msgid ""
-"The default list includes \"environment\" and \"en\". "
-"\"<literal>environment</literal>\" has a special meaning here: It will be "
-"replaced at runtime with the languagecodes extracted from the "
-"<literal>LC_MESSAGES</literal> environment variable. It will also ensure "
-"that these codes are not included twice in the list. If "
-"<literal>LC_MESSAGES</literal> is set to \"C\" only the "
-"<filename>Translation-en</filename> file (if available) will be used. To "
-"force apt to use no Translation file use the setting <literal>Acquire::"
-"Languages=none</literal>. \"<literal>none</literal>\" is another special "
-"meaning code which will stop the search for a fitting <filename>Translation</"
-"filename> file. This can be used by the system administrator to let APT "
-"know that it should download also this files without actually use them if "
-"the environment doesn't specify this languages. So the following example "
-"configuration will result in the order \"en, de\" in an english and in \"de, "
-"en\" in a german localization. Note that \"fr\" is downloaded, but not used "
-"if APT is not used in a french localization, in such an environment the "
-"order would be \"fr, de, en\". <placeholder type=\"programlisting\" id=\"0"
-"\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:228
-msgid ""
-"The <literal>Acquire</literal> group of options controls the download of "
-"packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:438
-msgid "Directories"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:440
-msgid ""
-"The <literal>Dir::State</literal> section has directories that pertain to "
-"local state information. <literal>lists</literal> is the directory to place "
-"downloaded package lists in and <literal>status</literal> is the name of the "
-"dpkg status file. <literal>preferences</literal> is the name of the APT "
-"preferences file. <literal>Dir::State</literal> contains the default "
-"directory to prefix on all sub items if they do not start with <filename>/</"
-"filename> or <filename>./</filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:447
-msgid ""
-"<literal>Dir::Cache</literal> contains locations pertaining to local cache "
-"information, such as the two package caches <literal>srcpkgcache</literal> "
-"and <literal>pkgcache</literal> as well as the location to place downloaded "
-"archives, <literal>Dir::Cache::archives</literal>. Generation of caches can "
-"be turned off by setting their names to be blank. This will slow down "
-"startup but save disk space. It is probably preferred to turn off the "
-"pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the "
-"default directory is contained in <literal>Dir::Cache</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:456
-msgid ""
-"<literal>Dir::Etc</literal> contains the location of configuration files, "
-"<literal>sourcelist</literal> gives the location of the sourcelist and "
-"<literal>main</literal> is the default configuration file (setting has no "
-"effect, unless it is done from the config file specified by "
-"<envar>APT_CONFIG</envar>)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:462
-msgid ""
-"The <literal>Dir::Parts</literal> setting reads in all the config fragments "
-"in lexical order from the directory specified. After this is done then the "
-"main config file is loaded."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:466
-msgid ""
-"Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::"
-"Bin::Methods</literal> specifies the location of the method handlers and "
-"<literal>gzip</literal>, <literal>bzip2</literal>, <literal>lzma</literal>, "
-"<literal>dpkg</literal>, <literal>apt-get</literal> <literal>dpkg-source</"
-"literal> <literal>dpkg-buildpackage</literal> and <literal>apt-cache</"
-"literal> specify the location of the respective programs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:474
-msgid ""
-"The configuration item <literal>RootDir</literal> has a special meaning. If "
-"set, all paths in <literal>Dir::</literal> will be relative to "
-"<literal>RootDir</literal>, <emphasis>even paths that are specified "
-"absolutely</emphasis>. So, for instance, if <literal>RootDir</literal> is "
-"set to <filename>/tmp/staging</filename> and <literal>Dir::State::status</"
-"literal> is set to <filename>/var/lib/dpkg/status</filename>, then the "
-"status file will be looked up in <filename>/tmp/staging/var/lib/dpkg/status</"
-"filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:487
-msgid "APT in DSelect"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:489
-msgid ""
-"When APT is used as a &dselect; method several configuration directives "
-"control the default behaviour. These are in the <literal>DSelect</literal> "
-"section."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:493
-msgid "Clean"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:494
-msgid ""
-"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto "
-"and never. always and prompt will remove all packages from the cache after "
-"upgrading, prompt (the default) does so conditionally. auto removes only "
-"those packages which are no longer downloadable (replaced with a new version "
-"for instance). pre-auto performs this action before downloading new "
-"packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:503
-msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the install phase."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:507
-msgid "Updateoptions"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:508
-msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the update phase."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:512
-msgid "PromptAfterUpdate"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:513
-msgid ""
-"If true the [U]pdate operation in &dselect; will always prompt to continue. "
-"The default is to prompt only on error."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:519
-msgid "How APT calls dpkg"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:520
-msgid ""
-"Several configuration directives control how APT invokes &dpkg;. These are "
-"in the <literal>DPkg</literal> section."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:525
-msgid ""
-"This is a list of options to pass to dpkg. The options must be specified "
-"using the list notation and each list item is passed as a single argument to "
-"&dpkg;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:530
-msgid "Pre-Invoke"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:530
-msgid "Post-Invoke"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:531
-msgid ""
-"This is a list of shell commands to run before/after invoking &dpkg;. Like "
-"<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
-"fail APT will abort."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:537
-msgid "Pre-Install-Pkgs"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:538
-msgid ""
-"This is a list of shell commands to run before invoking dpkg. Like "
-"<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
-"fail APT will abort. APT will pass to the commands on standard input the "
-"filenames of all .deb files it is going to install, one per line."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:544
-msgid ""
-"Version 2 of this protocol dumps more information, including the protocol "
-"version, the APT configuration space and the packages, files and versions "
-"being changed. Version 2 is enabled by setting <literal>DPkg::Tools::"
-"options::cmd::Version</literal> to 2. <literal>cmd</literal> is a command "
-"given to <literal>Pre-Install-Pkgs</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:551
-msgid "Run-Directory"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:552
-msgid ""
-"APT chdirs to this directory before invoking dpkg, the default is <filename>/"
-"</filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:556
-msgid "Build-options"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:557
-msgid ""
-"These options are passed to &dpkg-buildpackage; when compiling packages, the "
-"default is to disable signing and produce all binaries."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt.conf.5.xml:562
-msgid "dpkg trigger usage (and related options)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:563
-msgid ""
-"APT can call dpkg in a way so it can make aggressive use of triggers over "
-"multiply calls of dpkg. Without further options dpkg will use triggers only "
-"in between his own run. Activating these options can therefore decrease the "
-"time needed to perform the install / upgrade. Note that it is intended to "
-"activate these options per default in the future, but as it changes the way "
-"APT calling dpkg drastically it needs a lot more testing. <emphasis>These "
-"options are therefore currently experimental and should not be used in "
-"productive environments.</emphasis> Also it breaks the progress reporting so "
-"all frontends will currently stay around half (or more) of the time in the "
-"100% state while it actually configures all packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para><literallayout>
-#: apt.conf.5.xml:578
-#, no-wrap
-msgid ""
-"DPkg::NoTriggers \"true\";\n"
-"PackageManager::Configure \"smart\";\n"
-"DPkg::ConfigurePending \"true\";\n"
-"DPkg::TriggersPending \"true\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:572
-msgid ""
-"Note that it is not guaranteed that APT will support these options or that "
-"these options will not cause (big) trouble in the future. If you have "
-"understand the current risks and problems with these options, but are brave "
-"enough to help testing them create a new configuration file and test a "
-"combination of options. Please report any bugs, problems and improvements "
-"you encounter and make sure to note which options you have used in your "
-"reports. Asking dpkg for help could also be useful for debugging proposes, "
-"see e.g. <command>dpkg --audit</command>. A defensive option combination "
-"would be <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:584
-msgid "DPkg::NoTriggers"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:585
-msgid ""
-"Add the no triggers flag to all dpkg calls (except the ConfigurePending "
-"call). See &dpkg; if you are interested in what this actually means. In "
-"short: dpkg will not run the triggers when this flag is present unless it is "
-"explicitly called to do so in an extra call. Note that this option exists "
-"(undocumented) also in older apt versions with a slightly different meaning: "
-"Previously these option only append --no-triggers to the configure calls to "
-"dpkg - now apt will add these flag also to the unpack and remove calls."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:592
-msgid "PackageManager::Configure"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:593
-msgid ""
-"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
-"and \"<literal>no</literal>\". \"<literal>all</literal>\" is the default "
-"value and causes APT to configure all packages explicit. The "
-"\"<literal>smart</literal>\" way is it to configure only packages which need "
-"to be configured before another package can be unpacked (Pre-Depends) and "
-"let the rest configure by dpkg with a call generated by the next option. "
-"\"<literal>no</literal>\" on the other hand will not configure anything and "
-"totally rely on dpkg for configuration (which will at the moment fail if a "
-"Pre-Depends is encountered). Setting this option to another than the all "
-"value will implicitly activate also the next option per default as otherwise "
-"the system could end in an unconfigured status which could be unbootable!"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:603
-msgid "DPkg::ConfigurePending"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:604
-msgid ""
-"If this option is set apt will call <command>dpkg --configure --pending</"
-"command> to let dpkg handle all required configurations and triggers. This "
-"option is activated automatic per default if the previous option is not set "
-"to <literal>all</literal>, but deactivating could be useful if you want to "
-"run APT multiple times in a row - e.g. in an installer. In these sceneries "
-"you could deactivate this option in all but the last run."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:610
-msgid "DPkg::TriggersPending"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:611
-msgid ""
-"Useful for <literal>smart</literal> configuration as a package which has "
-"pending triggers is not considered as <literal>installed</literal> and dpkg "
-"treats them as <literal>unpacked</literal> currently which is a dealbreaker "
-"for Pre-Dependencies (see debbugs #526774). Note that this will process all "
-"triggers, not only the triggers needed to configure this package."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:616
-msgid "PackageManager::UnpackAll"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:617
-msgid ""
-"As the configuration can be deferred to be done at the end by dpkg it can be "
-"tried to order the unpack series only by critical needs, e.g. by Pre-"
-"Depends. Default is true and therefore the \"old\" method of ordering in "
-"various steps by everything. While both method were present in earlier APT "
-"versions the <literal>OrderCritical</literal> method was unused, so this "
-"method is very experimental and needs further improvements before becoming "
-"really useful."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><term>
-#: apt.conf.5.xml:624
-msgid "OrderList::Score::Immediate"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:632
-#, no-wrap
-msgid ""
-"OrderList::Score {\n"
-"\tDelete 500;\n"
-"\tEssential 200;\n"
-"\tImmediate 10;\n"
-"\tPreDepends 50;\n"
-"};"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:625
-msgid ""
-"Essential packages (and there dependencies) should be configured immediately "
-"after unpacking. It will be a good idea to do this quite early in the "
-"upgrade process as these these configure calls require currently also "
-"<literal>DPkg::TriggersPending</literal> which will run quite a few triggers "
-"(which maybe not needed). Essentials get per default a high score but the "
-"immediate flag is relatively low (a package which has a Pre-Depends is "
-"higher rated). These option and the others in the same group can be used to "
-"change the scoring. The following example shows the settings with there "
-"default values. <placeholder type=\"literallayout\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:645
-msgid "Periodic and Archives options"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:646
-msgid ""
-"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups "
-"of options configure behavior of apt periodic updates, which is done by "
-"<literal>/etc/cron.daily/apt</literal> script. See header of this script for "
-"the brief documentation of these options."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:654
-msgid "Debug options"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:656
-msgid ""
-"Enabling options in the <literal>Debug::</literal> section will cause "
-"debugging information to be sent to the standard error stream of the program "
-"utilizing the <literal>apt</literal> libraries, or enable special program "
-"modes that are primarily useful for debugging the behavior of <literal>apt</"
-"literal>. Most of these options are not interesting to a normal user, but a "
-"few may be:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:667
-msgid ""
-"<literal>Debug::pkgProblemResolver</literal> enables output about the "
-"decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</"
-"literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:675
-msgid ""
-"<literal>Debug::NoLocking</literal> disables all file locking. This can be "
-"used to run some operations (for instance, <literal>apt-get -s install</"
-"literal>) as a non-root user."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:684
-msgid ""
-"<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each "
-"time that <literal>apt</literal> invokes &dpkg;."
-msgstr ""
-
-#. TODO: provide a
-#. motivating example, except I haven't a clue why you'd want
-#. to do this.
-#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:692