#, fuzzy
msgid ""
msgstr ""
-"Project-Id-Version: apt-doc 0.9.8.1\n"
+"Project-Id-Version: apt-doc 1.0.4~20140610\n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2013-06-13 13:46+0300\n"
+"POT-Creation-Date: 2014-06-10 15:59+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
msgstr ""
#. type: Content of: <refentry><refmeta><manvolnum>
-#: apt-get.8.xml:26 apt-cache.8.xml:26 apt-key.8.xml:25 apt-mark.8.xml:26 apt-secure.8.xml:25 apt-cdrom.8.xml:25 apt-config.8.xml:26
+#: apt.8.xml:25 apt-get.8.xml:28 apt-cache.8.xml:28 apt-key.8.xml:27 apt-mark.8.xml:28 apt-secure.8.xml:27 apt-cdrom.8.xml:27 apt-config.8.xml:28
msgid "8"
msgstr ""
#. type: Content of: <refentry><refmeta><refmiscinfo>
-#: apt-get.8.xml:27 apt-cache.8.xml:27 apt-key.8.xml:26 apt-mark.8.xml:27 apt-secure.8.xml:26 apt-cdrom.8.xml:26 apt-config.8.xml:27 apt.conf.5.xml:32 apt_preferences.5.xml:26 sources.list.5.xml:27 apt-extracttemplates.1.xml:27 apt-sortpkgs.1.xml:27 apt-ftparchive.1.xml:27
+#: apt.8.xml:26 apt-get.8.xml:29 apt-cache.8.xml:29 apt-key.8.xml:28 apt-mark.8.xml:29 apt-secure.8.xml:28 apt-cdrom.8.xml:28 apt-config.8.xml:29 apt.conf.5.xml:34 apt_preferences.5.xml:28 sources.list.5.xml:29 apt-extracttemplates.1.xml:29 apt-sortpkgs.1.xml:29 apt-ftparchive.1.xml:29
msgid "APT"
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-get.8.xml:33
-msgid "APT package handling utility -- command-line interface"
+#: apt.8.xml:32
+msgid "command-line interface"
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-get.8.xml:38 apt-cache.8.xml:38 apt-key.8.xml:37 apt-mark.8.xml:38 apt-secure.8.xml:50 apt-cdrom.8.xml:37 apt-config.8.xml:38 apt.conf.5.xml:41 apt_preferences.5.xml:36 sources.list.5.xml:36 apt-extracttemplates.1.xml:38 apt-sortpkgs.1.xml:38 apt-ftparchive.1.xml:38
+#: apt.8.xml:37 apt-get.8.xml:40 apt-cache.8.xml:40 apt-key.8.xml:39 apt-mark.8.xml:40 apt-secure.8.xml:52 apt-cdrom.8.xml:39 apt-config.8.xml:40 apt.conf.5.xml:43 apt_preferences.5.xml:38 sources.list.5.xml:38 apt-extracttemplates.1.xml:40 apt-sortpkgs.1.xml:40 apt-ftparchive.1.xml:40
msgid "Description"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-get.8.xml:39
+#: apt.8.xml:38
+msgid ""
+"<command>apt</command> (Advanced Package Tool) is the command-line tool for "
+"handling packages. It provides a commandline interface for the package "
+"management of the system. See also &apt-get; and &apt-cache; for more "
+"low-level command options."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml:47
+msgid ""
+"<literal>list</literal> is used to display a list of packages. It supports "
+"shell pattern for matching package names and the following options: "
+"<option>--installed</option>, <option>--upgradable</option>, "
+"<option>--all-versions</option> are supported."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml:58
+msgid ""
+"<literal>search</literal> searches for the given term(s) and display "
+"matching packages."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml:64
+msgid ""
+"<literal>show</literal> shows the package information for the given "
+"package(s)."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml:71
+msgid ""
+"<literal>install</literal> is followed by one or more package names desired "
+"for installation or upgrading."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml:75 apt-get.8.xml:118
+msgid ""
+"A specific version of a package can be selected for installation by "
+"following the package name with an equals and the version of the package to "
+"select. This will cause that version to be located and selected for "
+"install. Alternatively a specific distribution can be selected by following "
+"the package name with a slash and the version of the distribution or the "
+"Archive name (stable, testing, unstable)."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml:85 apt-get.8.xml:153
+msgid ""
+"<literal>remove</literal> is identical to <literal>install</literal> except "
+"that packages are removed instead of installed. Note that removing a package "
+"leaves its configuration files on the system. If a plus sign is appended to "
+"the package name (with no intervening space), the identified package will be "
+"installed instead of removed."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml:93
+msgid ""
+"<literal>edit-sources</literal> lets you edit your sources.list file and "
+"provides basic sanity checks."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml:99
+msgid ""
+"<literal>update</literal> is used to resynchronize the package index files "
+"from their sources."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml:105
+msgid ""
+"<literal>upgrade</literal> is used to install the newest versions of all "
+"packages currently installed on the system from the sources enumerated in "
+"<filename>/etc/apt/sources.list</filename>. New package will be installed, "
+"but existing package will never removed."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.8.xml:114
+msgid ""
+"<literal>full-upgrade</literal> performs the function of upgrade but may "
+"also remove installed packages if that is required in order to resolve a "
+"package conflict."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt.8.xml:124 apt-get.8.xml:257 apt-cache.8.xml:250 apt-mark.8.xml:110 apt-config.8.xml:86 apt-extracttemplates.1.xml:54 apt-sortpkgs.1.xml:50 apt-ftparchive.1.xml:506
+msgid "options"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt.8.xml:134
+msgid "Script usage"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.8.xml:136
+msgid ""
+"The &apt; commandline is designed as a end-user tool and it may change the "
+"output between versions. While it tries to not break backward compatibility "
+"there is no guarantee for it either. All features of &apt; are available in "
+"&apt-cache; and &apt-get; via APT options. Please prefer using these "
+"commands in your scripts."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt.8.xml:144
+msgid "Differences to &apt-get;"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.8.xml:145
+msgid ""
+"The <command>apt</command> command is meant to be pleasant for end users and "
+"does not need to be backward compatible like &apt-get;. Therefore some "
+"options are different:"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: apt.8.xml:151
+msgid "The option <literal>DPkg::Progress-Fancy</literal> is enabled."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: apt.8.xml:155
+msgid "The option <literal>APT::Color</literal> is enabled."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: apt.8.xml:159
+msgid ""
+"A new <literal>list</literal> command is available similar to <literal>dpkg "
+"--list</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: apt.8.xml:164
+msgid ""
+"The option <literal>upgrade</literal> has <literal>--with-new-pkgs</literal> "
+"enabled by default."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt.8.xml:174 apt-get.8.xml:558 apt-cache.8.xml:352 apt-key.8.xml:197 apt-mark.8.xml:133 apt-secure.8.xml:193 apt-cdrom.8.xml:154 apt-config.8.xml:111 apt.conf.5.xml:1227 apt_preferences.5.xml:707 sources.list.5.xml:280 apt-extracttemplates.1.xml:72 apt-sortpkgs.1.xml:65 apt-ftparchive.1.xml:609
+msgid "See Also"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.8.xml:175
+msgid ""
+"&apt-get;, &apt-cache;, &sources-list;, &apt-conf;, &apt-config;, The APT "
+"User's guide in &guidesdir;, &apt-preferences;, the APT Howto."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt.8.xml:180 apt-get.8.xml:564 apt-cache.8.xml:357 apt-mark.8.xml:137 apt-cdrom.8.xml:159 apt-config.8.xml:116 apt-extracttemplates.1.xml:76 apt-sortpkgs.1.xml:69 apt-ftparchive.1.xml:613
+msgid "Diagnostics"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt.8.xml:181
+msgid ""
+"<command>apt</command> returns zero on normal operation, decimal 100 on "
+"error."
+msgstr ""
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-get.8.xml:35
+msgid "APT package handling utility -- command-line interface"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-get.8.xml:41
msgid ""
"<command>apt-get</command> is the command-line tool for handling packages, "
"and may be considered the user's \"back-end\" to other tools using the APT "
-"library. Several \"front-end\" interfaces exist, such as &dselect;, "
-"&aptitude;, &synaptic; and &wajig;."
+"library. Several \"front-end\" interfaces exist, such as &aptitude;, "
+"&synaptic; and &wajig;."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-get.8.xml:44 apt-cache.8.xml:44 apt-cdrom.8.xml:51 apt-config.8.xml:44 apt-ftparchive.1.xml:54
+#: apt-get.8.xml:46 apt-cache.8.xml:46 apt-cdrom.8.xml:53 apt-config.8.xml:46 apt-ftparchive.1.xml:56
msgid ""
"Unless the <option>-h</option>, or <option>--help</option> option is given, "
"one of the commands below must be present."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:49
+#: apt-get.8.xml:51
msgid ""
"<literal>update</literal> is used to resynchronize the package index files "
"from their sources. The indexes of available packages are fetched from the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:61
+#: apt-get.8.xml:63
msgid ""
"<literal>upgrade</literal> is used to install the newest versions of all "
"packages currently installed on the system from the sources enumerated in "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:74
+#: apt-get.8.xml:76
msgid ""
"<literal>dist-upgrade</literal> in addition to performing the function of "
"<literal>upgrade</literal>, also intelligently handles changing dependencies "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:87
+#: apt-get.8.xml:89
msgid ""
"<literal>dselect-upgrade</literal> is used in conjunction with the "
"traditional Debian packaging front-end, "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:98
+#: apt-get.8.xml:100
msgid ""
"<literal>install</literal> is followed by one or more packages desired for "
"installation or upgrading. Each package is a package name, not a fully "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:116
-msgid ""
-"A specific version of a package can be selected for installation by "
-"following the package name with an equals and the version of the package to "
-"select. This will cause that version to be located and selected for "
-"install. Alternatively a specific distribution can be selected by following "
-"the package name with a slash and the version of the distribution or the "
-"Archive name (stable, testing, unstable)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:123
+#: apt-get.8.xml:125
msgid ""
"Both of the version selection mechanisms can downgrade packages and must be "
"used with care."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:126
+#: apt-get.8.xml:128
msgid ""
"This is also the target to use if you want to upgrade one or more "
"already-installed packages without upgrading every package you have on your "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:137
+#: apt-get.8.xml:139
msgid ""
"Finally, the &apt-preferences; mechanism allows you to create an alternative "
"installation policy for individual packages."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:141
+#: apt-get.8.xml:143
msgid ""
"If no package matches the given expression and the expression contains one "
"of '.', '?' or '*' then it is assumed to be a POSIX regular expression, and "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:151
-msgid ""
-"<literal>remove</literal> is identical to <literal>install</literal> except "
-"that packages are removed instead of installed. Note that removing a package "
-"leaves its configuration files on the system. If a plus sign is appended to "
-"the package name (with no intervening space), the identified package will be "
-"installed instead of removed."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:159
+#: apt-get.8.xml:161
msgid ""
"<literal>purge</literal> is identical to <literal>remove</literal> except "
"that packages are removed and purged (any configuration files are deleted "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:164
+#: apt-get.8.xml:166
msgid ""
"<literal>source</literal> causes <command>apt-get</command> to fetch source "
"packages. APT will examine the available packages to decide which source "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:172
+#: apt-get.8.xml:174
msgid ""
"Source packages are tracked separately from binary packages via "
"<literal>deb-src</literal> lines in the &sources-list; file. This means that "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:178
+#: apt-get.8.xml:180
msgid ""
"If the <option>--compile</option> option is specified then the package will "
"be compiled to a binary .deb using <command>dpkg-buildpackage</command> for "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:185
+#: apt-get.8.xml:187
msgid ""
"A specific source version can be retrieved by postfixing the source name "
"with an equals and then the version to fetch, similar to the mechanism used "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:191
+#: apt-get.8.xml:193
msgid ""
"Note that source packages are not installed and tracked in the "
"<command>dpkg</command> database like binary packages; they are simply "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:197
+#: apt-get.8.xml:199
msgid ""
"<literal>build-dep</literal> causes apt-get to install/remove packages in an "
"attempt to satisfy the build dependencies for a source package. By default "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:204
+#: apt-get.8.xml:206
msgid ""
"<literal>check</literal> is a diagnostic tool; it updates the package cache "
"and checks for broken dependencies."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:209
+#: apt-get.8.xml:211
msgid ""
"<literal>download</literal> will download the given binary package into the "
"current directory."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:215
+#: apt-get.8.xml:217
msgid ""
"<literal>clean</literal> clears out the local repository of retrieved "
"package files. It removes everything but the lock file from "
"<filename>&cachedir;/archives/</filename> and "
-"<filename>&cachedir;/archives/partial/</filename>. When APT is used as a "
-"&dselect; method, <literal>clean</literal> is run automatically. Those who "
-"do not use dselect will likely want to run <literal>apt-get clean</literal> "
-"from time to time to free up disk space."
+"<filename>&cachedir;/archives/partial/</filename>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:225
+#: apt-get.8.xml:224
msgid ""
"Like <literal>clean</literal>, <literal>autoclean</literal> clears out the "
"local repository of retrieved package files. The difference is that it only "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:235
+#: apt-get.8.xml:234
msgid ""
"<literal>autoremove</literal> is used to remove packages that were "
"automatically installed to satisfy dependencies for other packages and are "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:240
+#: apt-get.8.xml:239
msgid ""
"<literal>changelog</literal> downloads a package changelog and displays it "
"through <command>sensible-pager</command>. The server name and base "
"<option>install</option> command."
msgstr ""
-#. type: Content of: <refentry><refsect1><title>
-#: apt-get.8.xml:258 apt-cache.8.xml:248 apt-mark.8.xml:108 apt-config.8.xml:84 apt-extracttemplates.1.xml:52 apt-sortpkgs.1.xml:48 apt-ftparchive.1.xml:504
-msgid "options"
-msgstr ""
-
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:263
+#: apt-get.8.xml:262
msgid ""
"Do not consider recommended packages as a dependency for installing. "
"Configuration Item: <literal>APT::Install-Recommends</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:268
+#: apt-get.8.xml:267
msgid ""
"Consider suggested packages as a dependency for installing. Configuration "
"Item: <literal>APT::Install-Suggests</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:273
+#: apt-get.8.xml:272
msgid ""
"Download only; package files are only retrieved, not unpacked or installed. "
"Configuration Item: <literal>APT::Get::Download-Only</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:278
+#: apt-get.8.xml:277
msgid ""
"Fix; attempt to correct a system with broken dependencies in place. This "
"option, when used with install/remove, can omit any packages to permit APT "
"running APT for the first time; APT itself does not allow broken package "
"dependencies to exist on a system. It is possible that a system's dependency "
"structure can be so corrupt as to require manual intervention (which usually "
-"means using &dselect; or <command>dpkg --remove</command> to eliminate some "
-"of the offending packages). Use of this option together with "
-"<option>-m</option> may produce an error in some situations. Configuration "
-"Item: <literal>APT::Get::Fix-Broken</literal>."
+"means using <command>dpkg --remove</command> to eliminate some of the "
+"offending packages). Use of this option together with <option>-m</option> "
+"may produce an error in some situations. Configuration Item: "
+"<literal>APT::Get::Fix-Broken</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:293
+#: apt-get.8.xml:292
msgid ""
"Ignore missing packages; if packages cannot be retrieved or fail the "
"integrity check after retrieval (corrupted package files), hold back those "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:304
+#: apt-get.8.xml:303
msgid ""
"Disables downloading of packages. This is best used with "
"<option>--ignore-missing</option> to force APT to use only the .debs it has "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:311
+#: apt-get.8.xml:310
msgid ""
"Quiet; produces output suitable for logging, omitting progress indicators. "
"More q's will produce more quiet up to a maximum of 2. You can also use "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:326
+#: apt-get.8.xml:325
msgid ""
"No action; perform a simulation of events that would occur but do not "
"actually change the system. Configuration Item: "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:330
+#: apt-get.8.xml:329
msgid ""
"Simulated runs performed as a user will automatically deactivate locking "
"(<literal>Debug::NoLocking</literal>), and if the option "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:338
+#: apt-get.8.xml:337
msgid ""
"Simulated runs print out a series of lines, each representing a "
"<command>dpkg</command> operation: configure (<literal>Conf</literal>), "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:346
+#: apt-get.8.xml:345
msgid ""
"Automatic yes to prompts; assume \"yes\" as answer to all prompts and run "
"non-interactively. If an undesirable situation, such as changing a held "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:354
+#: apt-get.8.xml:353
msgid ""
"Automatic \"no\" to all prompts. Configuration Item: "
"<literal>APT::Get::Assume-No</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:359
+#: apt-get.8.xml:358
msgid ""
"Show upgraded packages; print out a list of all packages that are to be "
"upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:365
+#: apt-get.8.xml:364
msgid ""
"Show full versions for upgraded and installed packages. Configuration Item: "
"<literal>APT::Get::Show-Versions</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:371
+#: apt-get.8.xml:370
msgid ""
"This option controls the architecture packages are built for by "
"<command>apt-get source --compile</command> and how cross-builddependencies "
"are satisfied. By default is it not set which means that the host "
"architecture is the same as the build architecture (which is defined by "
"<literal>APT::Architecture</literal>). Configuration Item: "
-"<literal>APT::Get::Host-Architecture</literal>"
+"<literal>APT::Get::Host-Architecture</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:381
+#: apt-get.8.xml:380
+msgid ""
+"This option controls the activated build profiles for which a source package "
+"is built by <command>apt-get source --compile</command> and how build "
+"dependencies are satisfied. By default no build profile is active. More "
+"than one build profile can be activated at a time by concatenating them with "
+"a comma. Configuration Item: <literal>APT::Build-Profiles</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml:391
msgid ""
"Compile source packages after downloading them. Configuration Item: "
"<literal>APT::Get::Compile</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:386
+#: apt-get.8.xml:396
msgid ""
"Ignore package holds; this causes <command>apt-get</command> to ignore a "
"hold placed on a package. This may be useful in conjunction with "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:393
+#: apt-get.8.xml:403
+msgid ""
+"Allow installing new packages when used in conjunction with "
+"<literal>upgrade</literal>. This is useful if the update of a installed "
+"package requires new dependencies to be installed. Instead of holding the "
+"package back <literal>upgrade</literal> will upgrade the package and install "
+"the new dependencies. Note that <literal>upgrade</literal> with this option "
+"will never remove packages, only allow adding new ones. Configuration Item: "
+"<literal>APT::Get::Upgrade-Allow-New</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml:415
msgid ""
"Do not upgrade packages; when used in conjunction with "
"<literal>install</literal>, <literal>no-upgrade</literal> will prevent "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:400
+#: apt-get.8.xml:422
msgid ""
"Do not install new packages; when used in conjunction with "
"<literal>install</literal>, <literal>only-upgrade</literal> will install "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:408
+#: apt-get.8.xml:430
msgid ""
"Force yes; this is a dangerous option that will cause apt to continue "
"without prompting if it is doing something potentially harmful. It should "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:416
+#: apt-get.8.xml:438
msgid ""
"Instead of fetching the files to install their URIs are printed. Each URI "
"will have the path, the destination file name, the size and the expected MD5 "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:427
+#: apt-get.8.xml:449
msgid ""
"Use purge instead of remove for anything that would be removed. An asterisk "
"(\"*\") will be displayed next to packages which are scheduled to be "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:435
+#: apt-get.8.xml:457
msgid ""
"Re-install packages that are already installed and at the newest version. "
"Configuration Item: <literal>APT::Get::ReInstall</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:440
+#: apt-get.8.xml:462
msgid ""
"This option is on by default; use <literal>--no-list-cleanup</literal> to "
"turn it off. When it is on, <command>apt-get</command> will automatically "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:450
+#: apt-get.8.xml:472
msgid ""
"This option controls the default input to the policy engine; it creates a "
"default pin at priority 990 using the specified release string. This "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:465
+#: apt-get.8.xml:487
msgid ""
"Only perform operations that are 'trivial'. Logically this can be considered "
"related to <option>--assume-yes</option>; where "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:472
+#: apt-get.8.xml:494
msgid ""
"If any packages are to be removed apt-get immediately aborts without "
"prompting. Configuration Item: <literal>APT::Get::Remove</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:478
+#: apt-get.8.xml:500
msgid ""
"If the command is either <literal>install</literal> or "
"<literal>remove</literal>, then this option acts like running the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:485
+#: apt-get.8.xml:507
msgid ""
"Only has meaning for the <literal>source</literal> and "
"<literal>build-dep</literal> commands. Indicates that the given source "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:496
+#: apt-get.8.xml:518
msgid ""
"Download only the diff, dsc, or tar file of a source archive. Configuration "
"Item: <literal>APT::Get::Diff-Only</literal>, "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:502
+#: apt-get.8.xml:524
msgid ""
"Only process architecture-dependent build-dependencies. Configuration Item: "
"<literal>APT::Get::Arch-Only</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:507
+#: apt-get.8.xml:529
msgid ""
"Ignore if packages can't be authenticated and don't prompt about it. This "
"is useful for tools like pbuilder. Configuration Item: "
"<literal>APT::Get::AllowUnauthenticated</literal>."
msgstr ""
-#. type: Content of: <refentry><refsect1><title>
-#: apt-get.8.xml:518 apt-cache.8.xml:343 apt-key.8.xml:174 apt-mark.8.xml:125 apt.conf.5.xml:1167 apt_preferences.5.xml:698
-msgid "Files"
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml:535
+msgid ""
+"Show user friendly progress information in the terminal window when packages "
+"are installed, upgraded or removed. For a machine parsable version of this "
+"data see README.progress-reporting in the apt doc directory. Configuration "
+"Item: <literal>Dpkg::Progress</literal> and "
+"<literal>Dpkg::Progress-Fancy</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-get.8.xml:528 apt-cache.8.xml:350 apt-key.8.xml:195 apt-mark.8.xml:131 apt-secure.8.xml:191 apt-cdrom.8.xml:144 apt-config.8.xml:109 apt.conf.5.xml:1173 apt_preferences.5.xml:705 sources.list.5.xml:252 apt-extracttemplates.1.xml:70 apt-sortpkgs.1.xml:63 apt-ftparchive.1.xml:607
-msgid "See Also"
+#: apt-get.8.xml:548 apt-cache.8.xml:345 apt-key.8.xml:176 apt-mark.8.xml:127 apt.conf.5.xml:1221 apt_preferences.5.xml:700
+msgid "Files"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-get.8.xml:529
+#: apt-get.8.xml:559
msgid ""
-"&apt-cache;, &apt-cdrom;, &dpkg;, &dselect;, &sources-list;, &apt-conf;, "
-"&apt-config;, &apt-secure;, The APT User's guide in &guidesdir;, "
-"&apt-preferences;, the APT Howto."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt-get.8.xml:534 apt-cache.8.xml:355 apt-mark.8.xml:135 apt-cdrom.8.xml:149 apt-config.8.xml:114 apt-extracttemplates.1.xml:74 apt-sortpkgs.1.xml:67 apt-ftparchive.1.xml:611
-msgid "Diagnostics"
+"&apt-cache;, &apt-cdrom;, &dpkg;, &sources-list;, &apt-conf;, &apt-config;, "
+"&apt-secure;, The APT User's guide in &guidesdir;, &apt-preferences;, the "
+"APT Howto."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-get.8.xml:535
+#: apt-get.8.xml:565
msgid ""
"<command>apt-get</command> returns zero on normal operation, decimal 100 on "
"error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-cache.8.xml:33
+#: apt-cache.8.xml:35
msgid "query the APT cache"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-cache.8.xml:39
+#: apt-cache.8.xml:41
msgid ""
"<command>apt-cache</command> performs a variety of operations on APT's "
"package cache. <command>apt-cache</command> does not manipulate the state of "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:49
+#: apt-cache.8.xml:51
msgid ""
"<literal>gencaches</literal> creates APT's package cache. This is done "
"implicitly by all commands needing this cache if it is missing or outdated."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term><option><replaceable>
-#: apt-cache.8.xml:53 apt-cache.8.xml:142 apt-cache.8.xml:163 apt-cache.8.xml:185 apt-cache.8.xml:190 apt-cache.8.xml:206 apt-cache.8.xml:224 apt-cache.8.xml:236
+#: apt-cache.8.xml:55 apt-cache.8.xml:144 apt-cache.8.xml:165 apt-cache.8.xml:187 apt-cache.8.xml:192 apt-cache.8.xml:208 apt-cache.8.xml:226 apt-cache.8.xml:238
msgid "&synopsis-pkg;"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:54
+#: apt-cache.8.xml:56
msgid ""
"<literal>showpkg</literal> displays information about the packages listed on "
"the command line. Remaining arguments are package names. The available "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><informalexample><programlisting>
-#: apt-cache.8.xml:66
+#: apt-cache.8.xml:68
#, no-wrap
msgid ""
"Package: libreadline2\n"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:78
+#: apt-cache.8.xml:80
msgid ""
"Thus it may be seen that libreadline2, version 2.1-12, depends on libc5 and "
"ncurses3.0 which must be installed for libreadline2 to work. In turn, "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:87
+#: apt-cache.8.xml:89
msgid ""
"<literal>stats</literal> displays some statistics about the cache. No "
"further arguments are expected. Statistics reported are:"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:90
+#: apt-cache.8.xml:92
msgid ""
"<literal>Total package names</literal> is the number of package names found "
"in the cache."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:94
+#: apt-cache.8.xml:96
msgid ""
"<literal>Normal packages</literal> is the number of regular, ordinary "
"package names; these are packages that bear a one-to-one correspondence "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:100
+#: apt-cache.8.xml:102
msgid ""
"<literal>Pure virtual packages</literal> is the number of packages that "
"exist only as a virtual package name; that is, packages only \"provide\" the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:108
+#: apt-cache.8.xml:110
msgid ""
"<literal>Single virtual packages</literal> is the number of packages with "
"only one package providing a particular virtual package. For example, in the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:114
+#: apt-cache.8.xml:116
msgid ""
"<literal>Mixed virtual packages</literal> is the number of packages that "
"either provide a particular virtual package or have the virtual package name "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:121
+#: apt-cache.8.xml:123
msgid ""
"<literal>Missing</literal> is the number of package names that were "
"referenced in a dependency but were not provided by any package. Missing "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:128
+#: apt-cache.8.xml:130
msgid ""
"<literal>Total distinct</literal> versions is the number of package versions "
"found in the cache; this value is therefore at least equal to the number of "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><itemizedlist><listitem><para>
-#: apt-cache.8.xml:135
+#: apt-cache.8.xml:137
msgid ""
"<literal>Total dependencies</literal> is the number of dependency "
"relationships claimed by all of the packages in the cache."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:143
+#: apt-cache.8.xml:145
msgid ""
"<literal>showsrc</literal> displays all the source package records that "
"match the given package names. All versions are shown, as well as all "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:149
+#: apt-cache.8.xml:151
msgid ""
"<literal>dump</literal> shows a short listing of every package in the "
"cache. It is primarily for debugging."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:154
+#: apt-cache.8.xml:156
msgid ""
"<literal>dumpavail</literal> prints out an available list to stdout. This is "
"suitable for use with &dpkg; and is used by the &dselect; method."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:159
+#: apt-cache.8.xml:161
msgid ""
"<literal>unmet</literal> displays a summary of all unmet dependencies in the "
"package cache."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:164
+#: apt-cache.8.xml:166
msgid ""
"<literal>show</literal> performs a function similar to <command>dpkg "
"--print-avail</command>; it displays the package records for the named "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term><option><replaceable>
-#: apt-cache.8.xml:169
+#: apt-cache.8.xml:171
msgid "&synopsis-regex;"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:170
+#: apt-cache.8.xml:172
msgid ""
"<literal>search</literal> performs a full text search on all available "
"package lists for the POSIX regex pattern given, see ®ex;. It searches "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:181
+#: apt-cache.8.xml:183
msgid ""
"Separate arguments can be used to specify multiple search patterns that are "
"and'ed together."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:186
+#: apt-cache.8.xml:188
msgid ""
"<literal>depends</literal> shows a listing of each dependency a package has "
"and all the possible other packages that can fulfill that dependency."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:191
+#: apt-cache.8.xml:193
msgid ""
"<literal>rdepends</literal> shows a listing of each reverse dependency a "
"package has."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-cache.8.xml:195
+#: apt-cache.8.xml:197
msgid "<optional><replaceable>&synopsis-prefix;</replaceable></optional>"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:196
+#: apt-cache.8.xml:198
msgid ""
"This command prints the name of each package APT knows. The optional "
"argument is a prefix match to filter the name list. The output is suitable "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:201
+#: apt-cache.8.xml:203
msgid ""
"Note that a package which APT knows of is not necessarily available to "
"download, installable or installed, e.g. virtual packages are also listed in "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:207
+#: apt-cache.8.xml:209
msgid ""
"<literal>dotty</literal> takes a list of packages on the command line and "
"generates output suitable for use by dotty from the <ulink "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:216
+#: apt-cache.8.xml:218
msgid ""
"The resulting nodes will have several shapes; normal packages are boxes, "
"pure virtual packages are triangles, mixed virtual packages are diamonds, "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:221
+#: apt-cache.8.xml:223
msgid "Caution, dotty cannot graph larger sets of packages."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:225
+#: apt-cache.8.xml:227
msgid ""
"The same as <literal>dotty</literal>, only for xvcg from the <ulink "
"url=\"http://rw4.cs.uni-sb.de/users/sander/html/gsvcg1.html\">VCG "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-cache.8.xml:229
+#: apt-cache.8.xml:231
msgid "<optional><replaceable>&synopsis-pkg;</replaceable>…</optional>"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:230
+#: apt-cache.8.xml:232
msgid ""
"<literal>policy</literal> is meant to help debug issues relating to the "
"preferences file. With no arguments it will print out the priorities of each "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:237
+#: apt-cache.8.xml:239
msgid ""
"<literal>apt-cache</literal>'s <literal>madison</literal> command attempts "
"to mimic the output format and a subset of the functionality of the Debian "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:253
+#: apt-cache.8.xml:255
msgid ""
"Select the file to store the package cache. The package cache is the primary "
"cache used by all operations. Configuration Item: "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:259
+#: apt-cache.8.xml:261
msgid ""
"Select the file to store the source cache. The source is used only by "
"<literal>gencaches</literal> and it stores a parsed version of the package "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:267
+#: apt-cache.8.xml:269
msgid ""
"Quiet; produces output suitable for logging, omitting progress indicators. "
"More q's will produce more quietness up to a maximum of 2. You can also use "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:274
+#: apt-cache.8.xml:276
msgid ""
"Print only important dependencies; for use with <literal>unmet</literal> and "
"<literal>depends</literal>. Causes only Depends and Pre-Depends relations to "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:288
+#: apt-cache.8.xml:290
msgid ""
"Per default the <literal>depends</literal> and <literal>rdepends</literal> "
"print all dependencies. This can be tweaked with these flags which will omit "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:295
+#: apt-cache.8.xml:297
msgid ""
"Print full package records when searching. Configuration Item: "
"<literal>APT::Cache::ShowFull</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:300
+#: apt-cache.8.xml:302
msgid ""
"Print full records for all available versions. This is the default; to turn "
"it off, use <option>--no-all-versions</option>. If "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:309
+#: apt-cache.8.xml:311
msgid ""
"Perform automatic package cache regeneration, rather than use the cache as "
"it is. This is the default; to turn it off, use "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:315
+#: apt-cache.8.xml:317
msgid ""
"Only search on the package names, not the long descriptions. Configuration "
"Item: <literal>APT::Cache::NamesOnly</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:320
+#: apt-cache.8.xml:322
msgid ""
"Make <literal>pkgnames</literal> print all names, including virtual packages "
"and missing dependencies. Configuration Item: "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:326
+#: apt-cache.8.xml:328
msgid ""
"Make <literal>depends</literal> and <literal>rdepends</literal> recursive so "
"that all packages mentioned are printed once. Configuration Item: "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cache.8.xml:333
+#: apt-cache.8.xml:335
msgid ""
"Limit the output of <literal>depends</literal> and "
"<literal>rdepends</literal> to packages which are currently installed. "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-cache.8.xml:351
+#: apt-cache.8.xml:353
msgid "&apt-conf;, &sources-list;, &apt-get;"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-cache.8.xml:356
+#: apt-cache.8.xml:358
msgid ""
"<command>apt-cache</command> returns zero on normal operation, decimal 100 "
"on error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-key.8.xml:32
+#: apt-key.8.xml:34
msgid "APT key management utility"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-key.8.xml:39
+#: apt-key.8.xml:41
msgid ""
"<command>apt-key</command> is used to manage the list of keys used by apt to "
"authenticate packages. Packages which have been authenticated using these "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-key.8.xml:45
+#: apt-key.8.xml:47
msgid "Commands"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:50
+#: apt-key.8.xml:52
msgid ""
"Add a new key to the list of trusted keys. The key is read from the "
"filename given with the parameter &synopsis-param-filename; or if the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:63
+#: apt-key.8.xml:65
msgid "Remove a key from the list of trusted keys."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:74
+#: apt-key.8.xml:76
msgid "Output the key &synopsis-param-keyid; to standard output."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:85
+#: apt-key.8.xml:87
msgid "Output all trusted keys to standard output."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:96
+#: apt-key.8.xml:98
msgid "List trusted keys."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:107
+#: apt-key.8.xml:109
msgid "List fingerprints of trusted keys."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:118
+#: apt-key.8.xml:120
msgid ""
"Pass advanced options to gpg. With adv --recv-key you can download the "
"public key."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:130
+#: apt-key.8.xml:132
msgid ""
"Update the local keyring with the archive keyring and remove from the local "
"keyring the archive keys which are no longer valid. The archive keyring is "
"shipped in the <literal>archive-keyring</literal> package of your "
-"distribution, e.g. the <literal>debian-archive-keyring</literal> package in "
-"Debian."
+"distribution, e.g. the &keyring-package; package in &keyring-distro;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:144
+#: apt-key.8.xml:146
msgid ""
"Perform an update working similarly to the <command>update</command> command "
"above, but get the archive keyring from a URI instead and validate it "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-key.8.xml:160 apt-cdrom.8.xml:80
+#: apt-key.8.xml:162 apt-cdrom.8.xml:82
msgid "Options"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-key.8.xml:161
+#: apt-key.8.xml:163
msgid ""
"Note that options need to be defined before the commands described in the "
"previous section."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:164
+#: apt-key.8.xml:166
msgid ""
"With this option it is possible to specify a particular keyring file the "
"command should operate on. The default is that a command is executed on the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml:179
+#: apt-key.8.xml:181
msgid "<filename>/etc/apt/trustdb.gpg</filename>"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:180
+#: apt-key.8.xml:182
msgid "Local trust database of archive keys."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml:183
-msgid "<filename>/usr/share/keyrings/debian-archive-keyring.gpg</filename>"
+#: apt-key.8.xml:185
+msgid "&keyring-filename;"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:184
-msgid "Keyring of Debian archive trusted keys."
+#: apt-key.8.xml:186
+msgid "Keyring of &keyring-distro; archive trusted keys."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-key.8.xml:187
-msgid "<filename>/usr/share/keyrings/debian-archive-removed-keys.gpg</filename>"
+#: apt-key.8.xml:189
+msgid "&keyring-removed-filename;"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-key.8.xml:188
-msgid "Keyring of Debian archive removed trusted keys."
+#: apt-key.8.xml:190
+msgid "Keyring of &keyring-distro; archive removed trusted keys."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-key.8.xml:197
+#: apt-key.8.xml:199
msgid "&apt-get;, &apt-secure;"
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-mark.8.xml:33
+#: apt-mark.8.xml:35
msgid "mark/unmark a package as being automatically-installed"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-mark.8.xml:39
+#: apt-mark.8.xml:41
msgid ""
"<command>apt-mark</command> will change whether a package has been marked as "
"being automatically installed."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-mark.8.xml:43
+#: apt-mark.8.xml:45
msgid ""
"When you request that a package is installed, and as a result other packages "
"are installed to satisfy its dependencies, the dependencies are marked as "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:52
+#: apt-mark.8.xml:54
msgid ""
"<literal>auto</literal> is used to mark a package as being automatically "
"installed, which will cause the package to be removed when no more manually "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:60
+#: apt-mark.8.xml:62
msgid ""
"<literal>manual</literal> is used to mark a package as being manually "
"installed, which will prevent the package from being automatically removed "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:68
+#: apt-mark.8.xml:70
msgid ""
"<literal>hold</literal> is used to mark a package as held back, which will "
"prevent the package from being automatically installed, upgraded or "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:78
+#: apt-mark.8.xml:80
msgid ""
"<literal>unhold</literal> is used to cancel a previously set hold on a "
"package to allow all actions again."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:84
+#: apt-mark.8.xml:86
msgid ""
"<literal>showauto</literal> is used to print a list of automatically "
"installed packages with each package on a new line. All automatically "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:92
+#: apt-mark.8.xml:94
msgid ""
"<literal>showmanual</literal> can be used in the same way as "
"<literal>showauto</literal> except that it will print a list of manually "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:99
+#: apt-mark.8.xml:101
msgid ""
"<literal>showhold</literal> is used to print a list of packages on hold in "
"the same way as for the other show commands."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-mark.8.xml:115
+#: apt-mark.8.xml:117
msgid ""
"Read/Write package stats from the filename given with the parameter "
"&synopsis-param-filename; instead of from the default location, which is "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-mark.8.xml:136
+#: apt-mark.8.xml:138
msgid ""
"<command>apt-mark</command> returns zero on normal operation, non-zero on "
"error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-secure.8.xml:47
+#: apt-secure.8.xml:49
msgid "Archive authentication support for APT"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:52
+#: apt-secure.8.xml:54
msgid ""
"Starting with version 0.6, <command>apt</command> contains code that does "
"signature checking of the Release file for all archives. This ensures that "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:60
+#: apt-secure.8.xml:62
msgid ""
"If a package comes from a archive without a signature, or with a signature "
"that apt does not have a key for, that package is considered untrusted, and "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:69
+#: apt-secure.8.xml:71
msgid ""
"The package frontends &apt-get;, &aptitude; and &synaptic; support this new "
"authentication feature."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:74
+#: apt-secure.8.xml:76
msgid "Trusted archives"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:77
+#: apt-secure.8.xml:79
msgid ""
"The chain of trust from an apt archive to the end user is made up of several "
"steps. <command>apt-secure</command> is the last step in this chain; "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:85
+#: apt-secure.8.xml:87
msgid ""
"apt-secure does not review signatures at a package level. If you require "
"tools to do this you should look at <command>debsig-verify</command> and "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:92
+#: apt-secure.8.xml:94
msgid ""
"The chain of trust in Debian starts when a maintainer uploads a new package "
"or a new version of a package to the Debian archive. In order to become "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:102
+#: apt-secure.8.xml:104
msgid ""
"Once the uploaded package is verified and included in the archive, the "
"maintainer signature is stripped off, and checksums of the package are "
"computed and put in the Packages file. The checksums of all of the Packages "
"files are then computed and put into the Release file. The Release file is "
-"then signed by the archive key for this Debian release, and distributed "
-"alongside the packages and the Packages files on Debian mirrors. The keys "
-"are in the Debian archive keyring available in the "
-"<package>debian-archive-keyring</package> package."
+"then signed by the archive key for this &keyring-distro; release, and "
+"distributed alongside the packages and the Packages files on "
+"&keyring-distro; mirrors. The keys are in the &keyring-distro; archive "
+"keyring available in the &keyring-package; package."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:113
+#: apt-secure.8.xml:115
msgid ""
"End users can check the signature of the Release file, extract a checksum of "
"a package from it and compare it with the checksum of the package they "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:118
+#: apt-secure.8.xml:120
msgid ""
"Notice that this is distinct from checking signatures on a per package "
"basis. It is designed to prevent two possible attacks:"
msgstr ""
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:123
+#: apt-secure.8.xml:125
msgid ""
"<literal>Network \"man in the middle\" attacks</literal>. Without signature "
"checking, malicious agents can introduce themselves into the package "
msgstr ""
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:131
+#: apt-secure.8.xml:133
msgid ""
"<literal>Mirror network compromise</literal>. Without signature checking, a "
"malicious agent can compromise a mirror host and modify the files in it to "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:138
+#: apt-secure.8.xml:140
msgid ""
"However, it does not defend against a compromise of the Debian master server "
"itself (which signs the packages) or against a compromise of the key used to "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:144
+#: apt-secure.8.xml:146
msgid "User configuration"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:146
+#: apt-secure.8.xml:148
msgid ""
"<command>apt-key</command> is the program that manages the list of keys used "
"by apt. It can be used to add or remove keys, although an installation of "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:153
+#: apt-secure.8.xml:155
msgid ""
"In order to add a new key you need to first download it (you should make "
"sure you are using a trusted communication channel when retrieving it), add "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:162
+#: apt-secure.8.xml:164
msgid "Archive configuration"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:164
+#: apt-secure.8.xml:166
msgid ""
"If you want to provide archive signatures in an archive under your "
"maintenance you have to:"
msgstr ""
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:169
+#: apt-secure.8.xml:171
msgid ""
"<emphasis>Create a toplevel Release file</emphasis>, if it does not exist "
"already. You can do this by running <command>apt-ftparchive "
msgstr ""
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:174
+#: apt-secure.8.xml:176
msgid ""
"<emphasis>Sign it</emphasis>. You can do this by running <command>gpg "
"--clearsign -o InRelease Release</command> and <command>gpg -abs -o "
msgstr ""
#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:178
+#: apt-secure.8.xml:180
msgid ""
"<emphasis>Publish the key fingerprint</emphasis>, that way your users will "
"know what key they need to import in order to authenticate the files in the "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:185
+#: apt-secure.8.xml:187
msgid ""
"Whenever the contents of the archive change (new packages are added or "
"removed) the archive maintainer has to follow the first two steps outlined "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:193
+#: apt-secure.8.xml:195
msgid ""
"&apt-conf;, &apt-get;, &sources-list;, &apt-key;, &apt-ftparchive;, "
"&debsign; &debsig-verify;, &gpg;"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:197
+#: apt-secure.8.xml:199
msgid ""
"For more background information you might want to review the <ulink "
"url=\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:210
+#: apt-secure.8.xml:212
msgid "Manpage Authors"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:212
+#: apt-secure.8.xml:214
msgid ""
"This man-page is based on the work of Javier Fernández-Sanguino Peña, Isaac "
"Jones, Colin Walters, Florian Weimer and Michael Vogt."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-cdrom.8.xml:32
+#: apt-cdrom.8.xml:34
msgid "APT CD-ROM management utility"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-cdrom.8.xml:38
+#: apt-cdrom.8.xml:40
msgid ""
"<command>apt-cdrom</command> is used to add a new CD-ROM to APT's list of "
"available sources. <command>apt-cdrom</command> takes care of determining "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-cdrom.8.xml:45
+#: apt-cdrom.8.xml:47
msgid ""
"It is necessary to use <command>apt-cdrom</command> to add CDs to the APT "
"system; it cannot be done by hand. Furthermore each disc in a multi-CD set "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:56
+#: apt-cdrom.8.xml:58
msgid ""
"<literal>add</literal> is used to add a new disc to the source list. It will "
"unmount the CD-ROM device, prompt for a disc to be inserted and then proceed "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:64
+#: apt-cdrom.8.xml:66
msgid ""
"APT uses a CD-ROM ID to track which disc is currently in the drive and "
"maintains a database of these IDs in "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:72
+#: apt-cdrom.8.xml:74
msgid ""
"A debugging tool to report the identity of the current disc as well as the "
"stored file name"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:85
+#: apt-cdrom.8.xml:87
+msgid ""
+"Do not try to auto-detect the CD-ROM path. Usually combined with the "
+"<option>--cdrom</option> option. Configuration Item: "
+"<literal>Acquire::cdrom::AutoDetect</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-cdrom.8.xml:95
msgid ""
"Mount point; specify the location to mount the CD-ROM. This mount point must "
"be listed in <filename>/etc/fstab</filename> and properly configured. "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:94
+#: apt-cdrom.8.xml:104
msgid ""
"Rename a disc; change the label of a disc or override the disc's given "
"label. This option will cause <command>apt-cdrom</command> to prompt for a "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:103
+#: apt-cdrom.8.xml:113
msgid ""
"No mounting; prevent <command>apt-cdrom</command> from mounting and "
"unmounting the mount point. Configuration Item: "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:111
+#: apt-cdrom.8.xml:121
msgid ""
"Fast Copy; Assume the package files are valid and do not check every "
"package. This option should be used only if <command>apt-cdrom</command> has "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:121
+#: apt-cdrom.8.xml:131
msgid ""
"Thorough Package Scan; This option may be needed with some old Debian "
"1.1/1.2 discs that have Package files in strange places. It takes much "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-cdrom.8.xml:132
+#: apt-cdrom.8.xml:142
msgid ""
"No Changes; Do not change the &sources-list; file and do not write index "
"files. Everything is still checked however. Configuration Item: "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-cdrom.8.xml:145
+#: apt-cdrom.8.xml:155
msgid "&apt-conf;, &apt-get;, &sources-list;"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-cdrom.8.xml:150
+#: apt-cdrom.8.xml:160
msgid ""
"<command>apt-cdrom</command> returns zero on normal operation, decimal 100 "
"on error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-config.8.xml:33
+#: apt-config.8.xml:35
msgid "APT Configuration Query program"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-config.8.xml:39
+#: apt-config.8.xml:41
msgid ""
"<command>apt-config</command> is an internal program used by various "
"portions of the APT suite to provide consistent configurability. It accesses "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-config.8.xml:51
+#: apt-config.8.xml:53
msgid ""
"shell is used to access the configuration information from a shell "
"script. It is given pairs of arguments, the first being a shell variable and "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><informalexample><programlisting>
-#: apt-config.8.xml:59
+#: apt-config.8.xml:61
#, no-wrap
msgid ""
"OPTS=\"-f\"\n"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-config.8.xml:64
+#: apt-config.8.xml:66
msgid ""
"This will set the shell environment variable $OPTS to the value of "
"MyApp::options with a default of <option>-f</option>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-config.8.xml:68
+#: apt-config.8.xml:70
msgid ""
"The configuration item may be postfixed with a /[fdbi]. f returns file "
"names, d returns directories, b returns true or false and i returns an "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-config.8.xml:77
+#: apt-config.8.xml:79
msgid "Just show the contents of the configuration space."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-config.8.xml:90
+#: apt-config.8.xml:92
msgid ""
"Include options which have an empty value. This is the default, so use "
"--no-empty to remove them from the output."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term><option><replaceable>
-#: apt-config.8.xml:95
+#: apt-config.8.xml:97
msgid "%f "%v";%n"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-config.8.xml:96
+#: apt-config.8.xml:98
msgid ""
"Defines the output of each config option. %t will be replaced with "
"its individual name, %f with its full hierarchical name and %v "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-config.8.xml:110 apt-extracttemplates.1.xml:71 apt-sortpkgs.1.xml:64 apt-ftparchive.1.xml:608
+#: apt-config.8.xml:112 apt-extracttemplates.1.xml:73 apt-sortpkgs.1.xml:66 apt-ftparchive.1.xml:610
msgid "&apt-conf;"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-config.8.xml:115
+#: apt-config.8.xml:117
msgid ""
"<command>apt-config</command> returns zero on normal operation, decimal 100 "
"on error."
msgstr ""
#. type: Content of: <refentry><refentryinfo><author><contrib>
-#: apt.conf.5.xml:20
+#: apt.conf.5.xml:22
msgid "Initial documentation of Debug::*."
msgstr ""
#. type: Content of: <refentry><refentryinfo><author><email>
-#: apt.conf.5.xml:21
+#: apt.conf.5.xml:23
msgid "dburrows@debian.org"
msgstr ""
#. type: Content of: <refentry><refmeta><manvolnum>
-#: apt.conf.5.xml:31 apt_preferences.5.xml:25 sources.list.5.xml:26
+#: apt.conf.5.xml:33 apt_preferences.5.xml:27 sources.list.5.xml:28
msgid "5"
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt.conf.5.xml:38
+#: apt.conf.5.xml:40
msgid "Configuration file for APT"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:42
+#: apt.conf.5.xml:44
msgid ""
"<filename>/etc/apt/apt.conf</filename> is the main configuration file shared "
"by all the tools in the APT suite of tools, though it is by no means the "
msgstr ""
#. type: Content of: <refentry><refsect1><orderedlist><para>
-#: apt.conf.5.xml:48
+#: apt.conf.5.xml:50
msgid ""
"When an APT tool starts up it will read the configuration files in the "
"following order:"
msgstr ""
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:50
+#: apt.conf.5.xml:52
msgid ""
"the file specified by the <envar>APT_CONFIG</envar> environment variable (if "
"any)"
msgstr ""
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:52
+#: apt.conf.5.xml:54
msgid ""
"all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending "
"order which have either no or \"<literal>conf</literal>\" as filename "
msgstr ""
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:59
+#: apt.conf.5.xml:61
msgid "the main configuration file specified by <literal>Dir::Etc::main</literal>"
msgstr ""
#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:61
+#: apt.conf.5.xml:63
msgid ""
"the command line options are applied to override the configuration "
"directives or to load even more configuration files."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:65
+#: apt.conf.5.xml:67
msgid "Syntax"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:66
+#: apt.conf.5.xml:68
msgid ""
"The configuration file is organized in a tree with options organized into "
"functional groups. Option specification is given with a double colon "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:72
+#: apt.conf.5.xml:74
msgid ""
"Syntactically the configuration language is modeled after what the ISC tools "
"such as bind and dhcp use. Lines starting with <literal>//</literal> are "
msgstr ""
#. type: Content of: <refentry><refsect1><informalexample><programlisting>
-#: apt.conf.5.xml:85
+#: apt.conf.5.xml:87
#, no-wrap
msgid ""
"APT {\n"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:93
+#: apt.conf.5.xml:95
msgid ""
"with newlines placed to make it more readable. Lists can be created by "
"opening a scope and including a single string enclosed in quotes followed by "
msgstr ""
#. type: Content of: <refentry><refsect1><informalexample><programlisting>
-#: apt.conf.5.xml:98
+#: apt.conf.5.xml:100
#, no-wrap
msgid "DPkg::Pre-Install-Pkgs {\"/usr/sbin/dpkg-preconfigure --apt\";};\n"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:101
+#: apt.conf.5.xml:103
msgid ""
"In general the sample configuration file &configureindex; is a good guide "
"for how it should look."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:104
+#: apt.conf.5.xml:106
msgid ""
"Case is not significant in names of configuration items, so in the previous "
"example you could use <literal>dpkg::pre-install-pkgs</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:107
+#: apt.conf.5.xml:109
msgid ""
"Names for the configuration items are optional if a list is defined as can "
"be seen in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. If "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:112
+#: apt.conf.5.xml:114
msgid ""
"Two special commands are defined: <literal>#include</literal> (which is "
"deprecated and not supported by alternative implementations) and "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:122
+#: apt.conf.5.xml:124
msgid ""
"The <literal>#clear</literal> command is the only way to delete a list or a "
"complete scope. Reopening a scope (or using the syntax described below with "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:130
+#: apt.conf.5.xml:132
msgid ""
"All of the APT tools take an -o option which allows an arbitrary "
"configuration directive to be specified on the command line. The syntax is a "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:138
+#: apt.conf.5.xml:140
msgid ""
"Note that appending items to a list using <literal>::</literal> only works "
"for one item per line, and that you should not use it in combination with "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:153
+#: apt.conf.5.xml:155
msgid "The APT Group"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:154
+#: apt.conf.5.xml:156
msgid ""
"This group of options controls general APT behavior as well as holding the "
"options for all of the tools."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:159
+#: apt.conf.5.xml:161
msgid ""
"System Architecture; sets the architecture to use when fetching files and "
"parsing package lists. The internal default is the architecture apt was "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:166
+#: apt.conf.5.xml:168
msgid ""
"All Architectures the system supports. For instance, CPUs implementing the "
"<literal>amd64</literal> (also called <literal>x86-64</literal>) "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:179
+#: apt.conf.5.xml:182
+msgid ""
+"List of all build profiles enabled for build-dependency resolution, without "
+"the \"<literal>profile.</literal>\" namespace prefix. By default this list "
+"is empty. The <envar>DEB_BUILD_PROFILES</envar> as used by "
+"&dpkg-buildpackage; overrides the list notation."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:190
msgid ""
"Default release to install packages from if more than one version is "
"available. Contains release name, codename or release version. Examples: "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:185
+#: apt.conf.5.xml:196
msgid ""
"Ignore held packages; this global option causes the problem resolver to "
"ignore held packages in its decision making."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:190
+#: apt.conf.5.xml:201
msgid ""
"Defaults to on. When turned on the autoclean feature will remove any "
"packages which can no longer be downloaded from the cache. If turned off "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:198
+#: apt.conf.5.xml:209
msgid ""
"Defaults to on, which will cause APT to install essential and important "
"packages as soon as possible in an install/upgrade operation, in order to "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:210
+#: apt.conf.5.xml:221
msgid ""
"The immediate configuration marker is also applied in the potentially "
"problematic case of circular dependencies, since a dependency with the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:223
+#: apt.conf.5.xml:234
msgid ""
"Before a big operation like <literal>dist-upgrade</literal> is run with this "
"option disabled you should try to explicitly <literal>install</literal> the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:234
+#: apt.conf.5.xml:245
msgid ""
"Never enable this option unless you <emphasis>really</emphasis> know what "
"you are doing. It permits APT to temporarily remove an essential package to "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:246
+#: apt.conf.5.xml:257
msgid ""
"APT uses since version 0.7.26 a resizable memory mapped cache file to store "
"the available information. <literal>Cache-Start</literal> acts as a hint of "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:262
+#: apt.conf.5.xml:273
msgid "Defines which packages are considered essential build dependencies."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:266
+#: apt.conf.5.xml:277
msgid ""
"The Get subsection controls the &apt-get; tool; please see its documentation "
"for more information about the options here."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:271
+#: apt.conf.5.xml:282
msgid ""
"The Cache subsection controls the &apt-cache; tool; please see its "
"documentation for more information about the options here."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:276
+#: apt.conf.5.xml:287
msgid ""
"The CDROM subsection controls the &apt-cdrom; tool; please see its "
"documentation for more information about the options here."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:282
+#: apt.conf.5.xml:293
msgid "The Acquire Group"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:283
+#: apt.conf.5.xml:294
msgid ""
"The <literal>Acquire</literal> group of options controls the download of "
"packages as well as the various \"acquire methods\" responsible for the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:290
+#: apt.conf.5.xml:301
msgid ""
"Security related option defaulting to true, as giving a Release file's "
"validation an expiration date prevents replay attacks over a long timescale, "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:303
+#: apt.conf.5.xml:314
msgid ""
"Maximum time (in seconds) after its creation (as indicated by the "
"<literal>Date</literal> header) that the <filename>Release</filename> file "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:315
+#: apt.conf.5.xml:326
msgid ""
"Minimum time (in seconds) after its creation (as indicated by the "
"<literal>Date</literal> header) that the <filename>Release</filename> file "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:327
+#: apt.conf.5.xml:338
msgid ""
"Try to download deltas called <literal>PDiffs</literal> for indexes (like "
"<filename>Packages</filename> files) instead of downloading whole ones. True "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:330
+#: apt.conf.5.xml:341
msgid ""
"Two sub-options to limit the use of PDiffs are also available: "
"<literal>FileLimit</literal> can be used to specify a maximum number of "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:340
+#: apt.conf.5.xml:351
msgid ""
"Queuing mode; <literal>Queue-Mode</literal> can be one of "
"<literal>host</literal> or <literal>access</literal> which determines how "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:348
+#: apt.conf.5.xml:359
msgid ""
"Number of retries to perform. If this is non-zero APT will retry failed "
"files the given number of times."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:353
+#: apt.conf.5.xml:364
msgid ""
"Use symlinks for source archives. If set to true then source archives will "
"be symlinked when possible instead of copying. True is the default."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:358
+#: apt.conf.5.xml:369
msgid ""
"<literal>http::Proxy</literal> sets the default proxy to use for HTTP "
"URIs. It is in the standard form of "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:366
+#: apt.conf.5.xml:377
msgid ""
"Three settings are provided for cache control with HTTP/1.1 compliant proxy "
"caches. <literal>No-Cache</literal> tells the proxy not to use its cached "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:376 apt.conf.5.xml:448
+#: apt.conf.5.xml:387 apt.conf.5.xml:475
msgid ""
"The option <literal>timeout</literal> sets the timeout timer used by the "
"method; this value applies to the connection as well as the data timeout."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:379
+#: apt.conf.5.xml:390
msgid ""
"The setting <literal>Acquire::http::Pipeline-Depth</literal> can be used to "
"enable HTTP pipelining (RFC 2616 section 8.1.2.2) which can be beneficial "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:386
+#: apt.conf.5.xml:397
msgid ""
"<literal>Acquire::http::AllowRedirect</literal> controls whether APT will "
"follow redirects, which is enabled by default."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:389
+#: apt.conf.5.xml:400
msgid ""
"The used bandwidth can be limited with "
"<literal>Acquire::http::Dl-Limit</literal> which accepts integer values in "
-"kilobytes. The default value is 0 which deactivates the limit and tries to "
-"use all available bandwidth (note that this option implicitly disables "
-"downloading from multiple servers at the same time.)"
+"kilobytes per second. The default value is 0 which deactivates the limit and "
+"tries to use all available bandwidth. Note that this option implicitly "
+"disables downloading from multiple servers at the same time."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:394
+#: apt.conf.5.xml:407
msgid ""
"<literal>Acquire::http::User-Agent</literal> can be used to set a different "
"User-Agent for the http download method as some proxies allow access for "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:402
+#: apt.conf.5.xml:411
+msgid ""
+"<literal>Acquire::http::Proxy-Auto-Detect</literal> can be used to specify "
+"an external command to discover the http proxy to use. Apt expects the "
+"command to output the proxy on stdout in the style "
+"<literal>http://proxy:port/</literal>. This will override the generic "
+"<literal>Acquire::http::Proxy</literal> but not any specific host proxy "
+"configuration set via <literal>Acquire::http::Proxy::$HOST</literal>. See "
+"the &squid-deb-proxy-client; package for an example implementation that uses "
+"avahi. This option takes precedence over the legacy option name "
+"<literal>ProxyAutoDetect</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:429
msgid ""
"The <literal>Cache-control</literal>, <literal>Timeout</literal>, "
"<literal>AllowRedirect</literal>, <literal>Dl-Limit</literal> and "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:410
+#: apt.conf.5.xml:437
msgid ""
"<literal>CaInfo</literal> suboption specifies place of file that holds info "
"about trusted certificates. <literal><host>::CaInfo</literal> is the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:431
+#: apt.conf.5.xml:458
msgid ""
"<literal>ftp::Proxy</literal> sets the default proxy to use for FTP URIs. "
"It is in the standard form of "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:451
+#: apt.conf.5.xml:478
msgid ""
"Several settings are provided to control passive mode. Generally it is safe "
"to leave passive mode on; it works in nearly every environment. However, "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:458
+#: apt.conf.5.xml:485
msgid ""
"It is possible to proxy FTP over HTTP by setting the "
"<envar>ftp_proxy</envar> environment variable to an HTTP URL - see the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:463
+#: apt.conf.5.xml:490
msgid ""
"The setting <literal>ForceExtended</literal> controls the use of RFC2428 "
"<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:477
+#: apt.conf.5.xml:504
#, no-wrap
msgid "/cdrom/::Mount \"foo\";"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:472
+#: apt.conf.5.xml:499
msgid ""
"For URIs using the <literal>cdrom</literal> method, the only configurable "
"option is the mount point, <literal>cdrom::Mount</literal>, which must be "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:485
+#: apt.conf.5.xml:512
msgid ""
"For GPGV URIs the only configurable option is "
"<literal>gpgv::Options</literal>, which passes additional parameters to "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:496
+#: apt.conf.5.xml:523
#, no-wrap
msgid ""
"Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:491
+#: apt.conf.5.xml:518
msgid ""
"List of compression types which are understood by the acquire methods. "
"Files like <filename>Packages</filename> can be available in various "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:501
+#: apt.conf.5.xml:528
#, no-wrap
msgid "Acquire::CompressionTypes::Order:: \"gz\";"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:504
+#: apt.conf.5.xml:531
#, no-wrap
msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:497
+#: apt.conf.5.xml:524
msgid ""
"Also, the <literal>Order</literal> subgroup can be used to define in which "
"order the acquire system will try to download the compressed files. The "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:511
+#: apt.conf.5.xml:538
#, no-wrap
msgid "Dir::Bin::bzip2 \"/bin/bzip2\";"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:506
+#: apt.conf.5.xml:533
msgid ""
"Note that the "
"<literal>Dir::Bin::<replaceable>Methodname</replaceable></literal> will be "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:516
+#: apt.conf.5.xml:543
msgid ""
"The special type <literal>uncompressed</literal> can be used to give "
"uncompressed files a preference, but note that most archives don't provide "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:523
+#: apt.conf.5.xml:550
msgid ""
"When downloading <literal>gzip</literal> compressed indexes (Packages, "
"Sources, or Translations), keep them gzip compressed locally instead of "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:531
+#: apt.conf.5.xml:558
msgid ""
"The Languages subsection controls which <filename>Translation</filename> "
"files are downloaded and in which order APT tries to display the "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><programlisting>
-#: apt.conf.5.xml:548
+#: apt.conf.5.xml:575
#, no-wrap
msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:536
+#: apt.conf.5.xml:563
msgid ""
"The default list includes \"environment\" and "
"\"en\". \"<literal>environment</literal>\" has a special meaning here: it "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:549
+#: apt.conf.5.xml:576
msgid ""
"Note: To prevent problems resulting from APT being executed in different "
"environments (e.g. by different users or by other programs) all Translation "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:558
+#: apt.conf.5.xml:585
msgid "When downloading, force to use only the IPv4 protocol."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:564
+#: apt.conf.5.xml:591
msgid "When downloading, force to use only the IPv6 protocol."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:571
+#: apt.conf.5.xml:598
msgid "Directories"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:573
+#: apt.conf.5.xml:600
msgid ""
"The <literal>Dir::State</literal> section has directories that pertain to "
"local state information. <literal>lists</literal> is the directory to place "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:580
+#: apt.conf.5.xml:607
msgid ""
"<literal>Dir::Cache</literal> contains locations pertaining to local cache "
"information, such as the two package caches <literal>srcpkgcache</literal> "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:589
+#: apt.conf.5.xml:616
msgid ""
"<literal>Dir::Etc</literal> contains the location of configuration files, "
"<literal>sourcelist</literal> gives the location of the sourcelist and "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:595
+#: apt.conf.5.xml:622
msgid ""
"The <literal>Dir::Parts</literal> setting reads in all the config fragments "
"in lexical order from the directory specified. After this is done then the "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:599
+#: apt.conf.5.xml:626
msgid ""
"Binary programs are pointed to by "
"<literal>Dir::Bin</literal>. <literal>Dir::Bin::Methods</literal> specifies "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:607
+#: apt.conf.5.xml:634
msgid ""
"The configuration item <literal>RootDir</literal> has a special meaning. If "
"set, all paths in <literal>Dir::</literal> will be relative to "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:620
+#: apt.conf.5.xml:647
msgid ""
"The <literal>Ignore-Files-Silently</literal> list can be used to specify "
"which files APT should silently ignore while parsing the files in the "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:629
+#: apt.conf.5.xml:656
msgid "APT in DSelect"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:631
+#: apt.conf.5.xml:658
msgid ""
"When APT is used as a &dselect; method several configuration directives "
"control the default behavior. These are in the <literal>DSelect</literal> "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:636
+#: apt.conf.5.xml:663
msgid ""
"Cache Clean mode; this value may be one of <literal>always</literal>, "
"<literal>prompt</literal>, <literal>auto</literal>, "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:650
+#: apt.conf.5.xml:677
msgid ""
"The contents of this variable are passed to &apt-get; as command line "
"options when it is run for the install phase."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:655
+#: apt.conf.5.xml:682
msgid ""
"The contents of this variable are passed to &apt-get; as command line "
"options when it is run for the update phase."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:660
+#: apt.conf.5.xml:687
msgid ""
"If true the [U]pdate operation in &dselect; will always prompt to continue. "
"The default is to prompt only on error."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:666
+#: apt.conf.5.xml:693
msgid "How APT calls &dpkg;"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:667
+#: apt.conf.5.xml:694
msgid ""
"Several configuration directives control how APT invokes &dpkg;. These are "
"in the <literal>DPkg</literal> section."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:672
+#: apt.conf.5.xml:699
msgid ""
"This is a list of options to pass to &dpkg;. The options must be specified "
"using the list notation and each list item is passed as a single argument to "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:678
+#: apt.conf.5.xml:705
msgid ""
"This is a list of shell commands to run before/after invoking &dpkg;. Like "
"<literal>options</literal> this must be specified in list notation. The "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:685
+#: apt.conf.5.xml:712
msgid ""
"This is a list of shell commands to run before invoking &dpkg;. Like "
"<literal>options</literal> this must be specified in list notation. The "
"commands are invoked in order using <filename>/bin/sh</filename>; should any "
"fail APT will abort. APT will pass the filenames of all .deb files it is "
-"going to install to the commands, one per line on standard input."
+"going to install to the commands, one per line on the requested file "
+"descriptor, defaulting to standard input."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:691
+#: apt.conf.5.xml:719
msgid ""
"Version 2 of this protocol dumps more information, including the protocol "
"version, the APT configuration space and the packages, files and versions "
-"being changed. Version 2 is enabled by setting "
-"<literal>DPkg::Tools::options::cmd::Version</literal> to "
-"2. <literal>cmd</literal> is a command given to "
-"<literal>Pre-Install-Pkgs</literal>."
+"being changed. Version 3 adds the architecture and "
+"<literal>MultiArch</literal> flag to each version being dumped."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:699
+#: apt.conf.5.xml:724
+msgid ""
+"The version of the protocol to be used for the command "
+"<literal><replaceable>cmd</replaceable></literal> can be chosen by setting "
+"<literal>DPkg::Tools::options::<replaceable>cmd</replaceable>::Version</literal> "
+"accordingly, the default being version 1. If APT isn't supporting the "
+"requested version it will send the information in the highest version it has "
+"support for instead."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:731
+msgid ""
+"The file descriptor to be used to send the information can be requested with "
+"<literal>DPkg::Tools::options::<replaceable>cmd</replaceable>::InfoFD</literal> "
+"which defaults to <literal>0</literal> for standard input and is available "
+"since version 0.9.11. Support for the option can be detected by looking for "
+"the environment variable <envar>APT_HOOK_INFO_FD</envar> which contains the "
+"number of the used file descriptor as a confirmation."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:741
msgid ""
"APT chdirs to this directory before invoking &dpkg;, the default is "
"<filename>/</filename>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:704
+#: apt.conf.5.xml:746
msgid ""
"These options are passed to &dpkg-buildpackage; when compiling packages; the "
"default is to disable signing and produce all binaries."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt.conf.5.xml:709
+#: apt.conf.5.xml:751
msgid "dpkg trigger usage (and related options)"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:710
+#: apt.conf.5.xml:752
msgid ""
"APT can call &dpkg; in such a way as to let it make aggressive use of "
"triggers over multiple calls of &dpkg;. Without further options &dpkg; will "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><literallayout>
-#: apt.conf.5.xml:725
+#: apt.conf.5.xml:767
#, no-wrap
msgid ""
"DPkg::NoTriggers \"true\";\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:719
+#: apt.conf.5.xml:761
msgid ""
"Note that it is not guaranteed that APT will support these options or that "
"these options will not cause (big) trouble in the future. If you have "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:732
+#: apt.conf.5.xml:774
msgid ""
"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending "
"call). See &dpkg; if you are interested in what this actually means. In "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:740
+#: apt.conf.5.xml:782
msgid ""
"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
"and \"<literal>no</literal>\". The default value is "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:755
+#: apt.conf.5.xml:797
msgid ""
"If this option is set APT will call <command>dpkg --configure "
"--pending</command> to let &dpkg; handle all required configurations and "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:762
+#: apt.conf.5.xml:804
msgid ""
"Useful for the <literal>smart</literal> configuration as a package which has "
"pending triggers is not considered as <literal>installed</literal>, and "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:775
+#: apt.conf.5.xml:817
#, no-wrap
msgid ""
"OrderList::Score {\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:768
+#: apt.conf.5.xml:810
msgid ""
"Essential packages (and their dependencies) should be configured immediately "
"after unpacking. It is a good idea to do this quite early in the upgrade "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:788
+#: apt.conf.5.xml:830
msgid "Periodic and Archives options"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:789
+#: apt.conf.5.xml:831
msgid ""
"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups "
"of options configure behavior of apt periodic updates, which is done by the "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:797
+#: apt.conf.5.xml:839
msgid "Debug options"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:799
+#: apt.conf.5.xml:841
msgid ""
"Enabling options in the <literal>Debug::</literal> section will cause "
"debugging information to be sent to the standard error stream of the program "
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:810
+#: apt.conf.5.xml:852
msgid ""
"<literal>Debug::pkgProblemResolver</literal> enables output about the "
"decisions made by <literal>dist-upgrade, upgrade, install, remove, "
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:818
+#: apt.conf.5.xml:860
msgid ""
"<literal>Debug::NoLocking</literal> disables all file locking. This can be "
"used to run some operations (for instance, <literal>apt-get -s "
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:827
+#: apt.conf.5.xml:869
msgid ""
"<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each "
"time that <literal>apt</literal> invokes &dpkg;."
#. motivating example, except I haven't a clue why you'd want
#. to do this.
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:835
+#: apt.conf.5.xml:877
msgid ""
"<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data "
"in CD-ROM IDs."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:845
+#: apt.conf.5.xml:887
msgid "A full list of debugging options to apt follows."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:854
+#: apt.conf.5.xml:896
msgid "Print information related to accessing <literal>cdrom://</literal> sources."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:865
+#: apt.conf.5.xml:907
msgid "Print information related to downloading packages using FTP."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:876
+#: apt.conf.5.xml:918
msgid "Print information related to downloading packages using HTTP."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:887
+#: apt.conf.5.xml:929
msgid "Print information related to downloading packages using HTTPS."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:898
+#: apt.conf.5.xml:940
msgid ""
"Print information related to verifying cryptographic signatures using "
"<literal>gpg</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:909
+#: apt.conf.5.xml:951
msgid ""
"Output information about the process of accessing collections of packages "
"stored on CD-ROMs."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:919
+#: apt.conf.5.xml:961
msgid "Describes the process of resolving build-dependencies in &apt-get;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:929
+#: apt.conf.5.xml:971
msgid ""
"Output each cryptographic hash that is generated by the "
"<literal>apt</literal> libraries."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:939
+#: apt.conf.5.xml:981
msgid ""
"Do not include information from <literal>statfs</literal>, namely the number "
"of used and free blocks on the CD-ROM filesystem, when generating an ID for "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:950
+#: apt.conf.5.xml:992
msgid ""
"Disable all file locking. For instance, this will allow two instances of "
"<quote><literal>apt-get update</literal></quote> to run at the same time."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:962
+#: apt.conf.5.xml:1004
msgid "Log when items are added to or removed from the global download queue."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:972
+#: apt.conf.5.xml:1014
msgid ""
"Output status messages and errors related to verifying checksums and "
"cryptographic signatures of downloaded files."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:982
+#: apt.conf.5.xml:1024
msgid ""
"Output information about downloading and applying package index list diffs, "
"and errors relating to package index list diffs."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:994
+#: apt.conf.5.xml:1036
msgid ""
"Output information related to patching apt package lists when downloading "
"index diffs instead of full indices."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1005
+#: apt.conf.5.xml:1047
msgid "Log all interactions with the sub-processes that actually perform downloads."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1016
+#: apt.conf.5.xml:1058
msgid ""
"Log events related to the automatically-installed status of packages and to "
"the removal of unused packages."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1026
+#: apt.conf.5.xml:1068
msgid ""
"Generate debug messages describing which packages are being automatically "
"installed to resolve dependencies. This corresponds to the initial "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1040
+#: apt.conf.5.xml:1082
msgid ""
"Generate debug messages describing which packages are marked as "
"keep/install/remove while the ProblemResolver does his work. Each addition "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1061
+#: apt.conf.5.xml:1103
msgid ""
"When invoking &dpkg;, output the precise command line with which it is being "
"invoked, with arguments separated by a single space character."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1072
+#: apt.conf.5.xml:1114
msgid ""
"Output all the data received from &dpkg; on the status file descriptor and "
"any errors encountered while parsing it."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1083
+#: apt.conf.5.xml:1125
msgid ""
"Generate a trace of the algorithm that decides the order in which "
"<literal>apt</literal> should pass packages to &dpkg;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1095
+#: apt.conf.5.xml:1137
msgid "Output status messages tracing the steps performed when invoking &dpkg;."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1106
+#: apt.conf.5.xml:1148
msgid "Output the priority of each package list on startup."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1116
+#: apt.conf.5.xml:1158
msgid ""
"Trace the execution of the dependency resolver (this applies only to what "
"happens when a complex dependency problem is encountered)."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1127
+#: apt.conf.5.xml:1169
msgid ""
"Display a list of all installed packages with their calculated score used by "
"the pkgProblemResolver. The description of the package is the same as "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1139
+#: apt.conf.5.xml:1181
msgid ""
"Print information about the vendors read from "
"<filename>/etc/apt/vendors.list</filename>."
msgstr ""
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:1191
+msgid ""
+"Display the external commands that are called by apt hooks. This includes "
+"e.g. the config options <literal>DPkg::{Pre,Post}-Invoke</literal> or "
+"<literal>APT::Update::{Pre,Post}-Invoke</literal>."
+msgstr ""
+
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:1161 apt_preferences.5.xml:545 sources.list.5.xml:211 apt-ftparchive.1.xml:596
+#: apt.conf.5.xml:1215 apt_preferences.5.xml:547 sources.list.5.xml:239 apt-ftparchive.1.xml:598
msgid "Examples"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1162
+#: apt.conf.5.xml:1216
msgid ""
"&configureindex; is a configuration file showing example values for all "
"possible options."
#. ? reading apt.conf
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1174
+#: apt.conf.5.xml:1228
msgid "&apt-cache;, &apt-config;, &apt-preferences;."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt_preferences.5.xml:32
+#: apt_preferences.5.xml:34
msgid "Preference control file for APT"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:37
+#: apt_preferences.5.xml:39
msgid ""
"The APT preferences file <filename>/etc/apt/preferences</filename> and the "
"fragment files in the <filename>/etc/apt/preferences.d/</filename> folder "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:42
+#: apt_preferences.5.xml:44
msgid ""
"Several versions of a package may be available for installation when the "
"&sources-list; file contains references to more than one distribution (for "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:52
+#: apt_preferences.5.xml:54
msgid ""
"Several instances of the same version of a package may be available when the "
"&sources-list; file contains references to more than one source. In this "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:59
+#: apt_preferences.5.xml:61
msgid ""
"Preferences are a strong power in the hands of a system administrator but "
"they can become also their biggest nightmare if used without care! APT will "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:70
+#: apt_preferences.5.xml:72
msgid ""
"Note that the files in the <filename>/etc/apt/preferences.d</filename> "
"directory are parsed in alphanumeric ascending order and need to obey the "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:79
+#: apt_preferences.5.xml:81
msgid "APT's Default Priority Assignments"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:94
+#: apt_preferences.5.xml:96
#, no-wrap
msgid ""
"<command>apt-get install -t testing "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:97
+#: apt_preferences.5.xml:99
#, no-wrap
msgid "APT::Default-Release \"stable\";\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:81
+#: apt_preferences.5.xml:83
msgid ""
"If there is no preferences file or if there is no entry in the file that "
"applies to a particular version then the priority assigned to that version "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:101
+#: apt_preferences.5.xml:103
msgid ""
"If the target release has been specified then APT uses the following "
"algorithm to set the priorities of the versions of a package. Assign:"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:106
+#: apt_preferences.5.xml:108
msgid "priority 1"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:107
+#: apt_preferences.5.xml:109
msgid ""
"to the versions coming from archives which in their "
"<filename>Release</filename> files are marked as \"NotAutomatic: yes\" but "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:113
+#: apt_preferences.5.xml:115
msgid "priority 100"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:114
+#: apt_preferences.5.xml:116
msgid ""
"to the version that is already installed (if any) and to the versions coming "
"from archives which in their <filename>Release</filename> files are marked "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:121
+#: apt_preferences.5.xml:123
msgid "priority 500"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:122
+#: apt_preferences.5.xml:124
msgid ""
"to the versions that are not installed and do not belong to the target "
"release."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:126
+#: apt_preferences.5.xml:128
msgid "priority 990"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:127
+#: apt_preferences.5.xml:129
msgid "to the versions that are not installed and belong to the target release."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:132
+#: apt_preferences.5.xml:134
msgid ""
"If the target release has not been specified then APT simply assigns "
"priority 100 to all installed package versions and priority 500 to all "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:139
+#: apt_preferences.5.xml:141
msgid ""
"APT then applies the following rules, listed in order of precedence, to "
"determine which version of a package to install."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:142
+#: apt_preferences.5.xml:144
msgid ""
"Never downgrade unless the priority of an available version exceeds 1000. "
"(\"Downgrading\" is installing a less recent version of a package in place "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:148
+#: apt_preferences.5.xml:150
msgid "Install the highest priority version."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:149
+#: apt_preferences.5.xml:151
msgid ""
"If two or more versions have the same priority, install the most recent one "
"(that is, the one with the higher version number)."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:152
+#: apt_preferences.5.xml:154
msgid ""
"If two or more versions have the same priority and version number but either "
"the packages differ in some of their metadata or the "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:158
+#: apt_preferences.5.xml:160
msgid ""
"In a typical situation, the installed version of a package (priority 100) "
"is not as recent as one of the versions available from the sources listed in "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:165
+#: apt_preferences.5.xml:167
msgid ""
"More rarely, the installed version of a package is <emphasis>more</emphasis> "
"recent than any of the other available versions. The package will not be "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:170
+#: apt_preferences.5.xml:172
msgid ""
"Sometimes the installed version of a package is more recent than the version "
"belonging to the target release, but not as recent as a version belonging to "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:179
+#: apt_preferences.5.xml:181
msgid "The Effect of APT Preferences"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:181
+#: apt_preferences.5.xml:183
msgid ""
"The APT preferences file allows the system administrator to control the "
"assignment of priorities. The file consists of one or more multi-line "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:187
+#: apt_preferences.5.xml:189
msgid ""
"The specific form assigns a priority (a \"Pin-Priority\") to one or more "
"specified packages with a specified version or version range. For example, "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:194
+#: apt_preferences.5.xml:196
#, no-wrap
msgid ""
"Package: perl\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:200
+#: apt_preferences.5.xml:202
msgid ""
"The general form assigns a priority to all of the package versions in a "
"given distribution (that is, to all the versions of packages that are listed "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:206
+#: apt_preferences.5.xml:208
msgid ""
"This general-form entry in the APT preferences file applies only to groups "
"of packages. For example, the following record assigns a high priority to "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:211
+#: apt_preferences.5.xml:213
#, no-wrap
msgid ""
"Package: *\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:216
+#: apt_preferences.5.xml:218
msgid ""
"A note of caution: the keyword used here is \"<literal>origin</literal>\" "
"which can be used to match a hostname. The following record will assign a "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:220
+#: apt_preferences.5.xml:222
#, no-wrap
msgid ""
"Package: *\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:224
+#: apt_preferences.5.xml:226
msgid ""
"This should <emphasis>not</emphasis> be confused with the Origin of a "
"distribution as specified in a <filename>Release</filename> file. What "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:229
+#: apt_preferences.5.xml:231
msgid ""
"The following record assigns a low priority to all package versions "
"belonging to any distribution whose Archive name is "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:233
+#: apt_preferences.5.xml:235
#, no-wrap
msgid ""
"Package: *\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:238
+#: apt_preferences.5.xml:240
msgid ""
"The following record assigns a high priority to all package versions "
"belonging to any distribution whose Codename is "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:242
+#: apt_preferences.5.xml:244
#, no-wrap
msgid ""
"Package: *\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:247
+#: apt_preferences.5.xml:249
msgid ""
"The following record assigns a high priority to all package versions "
"belonging to any release whose Archive name is \"<literal>stable</literal>\" "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><programlisting>
-#: apt_preferences.5.xml:252
+#: apt_preferences.5.xml:254
#, no-wrap
msgid ""
"Package: *\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:262
+#: apt_preferences.5.xml:264
msgid "Regular expressions and &glob; syntax"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:264
+#: apt_preferences.5.xml:266
msgid ""
"APT also supports pinning by &glob; expressions, and regular expressions "
"surrounded by slashes. For example, the following example assigns the "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><programlisting>
-#: apt_preferences.5.xml:273
+#: apt_preferences.5.xml:275
#, no-wrap
msgid ""
"Package: gnome* /kde/\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:279
+#: apt_preferences.5.xml:281
msgid ""
"The rule for those expressions is that they can occur anywhere where a "
"string can occur. Thus, the following pin assigns the priority 990 to all "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><programlisting>
-#: apt_preferences.5.xml:285
+#: apt_preferences.5.xml:287
#, no-wrap
msgid ""
"Package: *\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:291
+#: apt_preferences.5.xml:293
msgid ""
"If a regular expression occurs in a <literal>Package</literal> field, the "
"behavior is the same as if this regular expression were replaced with a list "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:307
+#: apt_preferences.5.xml:309
msgid "How APT Interprets Priorities"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:310
+#: apt_preferences.5.xml:312
msgid ""
"Priorities (P) assigned in the APT preferences file must be positive or "
"negative integers. They are interpreted as follows (roughly speaking):"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:315
+#: apt_preferences.5.xml:317
msgid "P >= 1000"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:316
+#: apt_preferences.5.xml:318
msgid ""
"causes a version to be installed even if this constitutes a downgrade of the "
"package"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:320
+#: apt_preferences.5.xml:322
msgid "990 <= P < 1000"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:321
+#: apt_preferences.5.xml:323
msgid ""
"causes a version to be installed even if it does not come from the target "
"release, unless the installed version is more recent"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:326
+#: apt_preferences.5.xml:328
msgid "500 <= P < 990"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:327
+#: apt_preferences.5.xml:329
msgid ""
"causes a version to be installed unless there is a version available "
"belonging to the target release or the installed version is more recent"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:332
+#: apt_preferences.5.xml:334
msgid "100 <= P < 500"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:333
+#: apt_preferences.5.xml:335
msgid ""
"causes a version to be installed unless there is a version available "
"belonging to some other distribution or the installed version is more recent"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:338
+#: apt_preferences.5.xml:340
msgid "0 < P < 100"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:339
+#: apt_preferences.5.xml:341
msgid ""
"causes a version to be installed only if there is no installed version of "
"the package"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:343
+#: apt_preferences.5.xml:345
msgid "P < 0"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:344
+#: apt_preferences.5.xml:346
msgid "prevents the version from being installed"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:349
+#: apt_preferences.5.xml:351
msgid ""
"If any specific-form records match an available package version then the "
"first such record determines the priority of the package version. Failing "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:355
+#: apt_preferences.5.xml:357
msgid ""
"For example, suppose the APT preferences file contains the three records "
"presented earlier:"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><programlisting>
-#: apt_preferences.5.xml:359
+#: apt_preferences.5.xml:361
#, no-wrap
msgid ""
"Package: perl\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:372
+#: apt_preferences.5.xml:374
msgid "Then:"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:374
+#: apt_preferences.5.xml:376
msgid ""
"The most recent available version of the <literal>perl</literal> package "
"will be installed, so long as that version's version number begins with "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:379
+#: apt_preferences.5.xml:381
msgid ""
"A version of any package other than <literal>perl</literal> that is "
"available from the local system has priority over other versions, even "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><itemizedlist><listitem><simpara>
-#: apt_preferences.5.xml:383
+#: apt_preferences.5.xml:385
msgid ""
"A version of a package whose origin is not the local system but some other "
"site listed in &sources-list; and which belongs to an "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:393
+#: apt_preferences.5.xml:395
msgid "Determination of Package Version and Distribution Properties"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:395
+#: apt_preferences.5.xml:397
msgid ""
"The locations listed in the &sources-list; file should provide "
"<filename>Packages</filename> and <filename>Release</filename> files to "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:399
+#: apt_preferences.5.xml:401
msgid ""
"The <filename>Packages</filename> file is normally found in the directory "
"<filename>.../dists/<replaceable>dist-name</replaceable>/<replaceable>component</replaceable>/<replaceable>arch</replaceable></filename>: "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:407
+#: apt_preferences.5.xml:409
msgid "the <literal>Package:</literal> line"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:408
+#: apt_preferences.5.xml:410
msgid "gives the package name"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:411 apt_preferences.5.xml:461
+#: apt_preferences.5.xml:413 apt_preferences.5.xml:463
msgid "the <literal>Version:</literal> line"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:412
+#: apt_preferences.5.xml:414
msgid "gives the version number for the named package"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:417
+#: apt_preferences.5.xml:419
msgid ""
"The <filename>Release</filename> file is normally found in the directory "
"<filename>.../dists/<replaceable>dist-name</replaceable></filename>: for "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:428
+#: apt_preferences.5.xml:430
msgid "the <literal>Archive:</literal> or <literal>Suite:</literal> line"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:429
+#: apt_preferences.5.xml:431
msgid ""
"names the archive to which all the packages in the directory tree belong. "
"For example, the line \"Archive: stable\" or \"Suite: stable\" specifies "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
-#: apt_preferences.5.xml:439
+#: apt_preferences.5.xml:441
#, no-wrap
msgid "Pin: release a=stable\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:445
+#: apt_preferences.5.xml:447
msgid "the <literal>Codename:</literal> line"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:446
+#: apt_preferences.5.xml:448
msgid ""
"names the codename to which all the packages in the directory tree belong. "
"For example, the line \"Codename: &testing-codename;\" specifies that all of "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
-#: apt_preferences.5.xml:455
+#: apt_preferences.5.xml:457
#, no-wrap
msgid "Pin: release n=&testing-codename;\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:462
+#: apt_preferences.5.xml:464
msgid ""
"names the release version. For example, the packages in the tree might "
"belong to Debian release version &stable-version;. Note that there is "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
-#: apt_preferences.5.xml:471
+#: apt_preferences.5.xml:473
#, no-wrap
msgid ""
"Pin: release v=&stable-version;\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:480
+#: apt_preferences.5.xml:482
msgid "the <literal>Component:</literal> line"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:481
+#: apt_preferences.5.xml:483
msgid ""
"names the licensing component associated with the packages in the directory "
"tree of the <filename>Release</filename> file. For example, the line "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
-#: apt_preferences.5.xml:490
+#: apt_preferences.5.xml:492
#, no-wrap
msgid "Pin: release c=main\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:496
+#: apt_preferences.5.xml:498
msgid "the <literal>Origin:</literal> line"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:497
+#: apt_preferences.5.xml:499
msgid ""
"names the originator of the packages in the directory tree of the "
"<filename>Release</filename> file. Most commonly, this is "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
-#: apt_preferences.5.xml:503
+#: apt_preferences.5.xml:505
#, no-wrap
msgid "Pin: release o=Debian\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><term>
-#: apt_preferences.5.xml:509
+#: apt_preferences.5.xml:511
msgid "the <literal>Label:</literal> line"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><simpara>
-#: apt_preferences.5.xml:510
+#: apt_preferences.5.xml:512
msgid ""
"names the label of the packages in the directory tree of the "
"<filename>Release</filename> file. Most commonly, this is "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><variablelist><varlistentry><listitem><programlisting>
-#: apt_preferences.5.xml:516
+#: apt_preferences.5.xml:518
#, no-wrap
msgid "Pin: release l=Debian\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:523
+#: apt_preferences.5.xml:525
msgid ""
"All of the <filename>Packages</filename> and <filename>Release</filename> "
"files retrieved from locations listed in the &sources-list; file are stored "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:536
+#: apt_preferences.5.xml:538
msgid "Optional Lines in an APT Preferences Record"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:538
+#: apt_preferences.5.xml:540
msgid ""
"Each record in the APT preferences file can optionally begin with one or "
"more lines beginning with the word <literal>Explanation:</literal>. This "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:547
+#: apt_preferences.5.xml:549
msgid "Tracking Stable"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:555
+#: apt_preferences.5.xml:557
#, no-wrap
msgid ""
"Explanation: Uninstall or do not install any Debian-originated\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:549
+#: apt_preferences.5.xml:551
msgid ""
"The following APT preferences file will cause APT to assign a priority "
"higher than the default (500) to all package versions belonging to a "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:572 apt_preferences.5.xml:618 apt_preferences.5.xml:676
+#: apt_preferences.5.xml:574 apt_preferences.5.xml:620 apt_preferences.5.xml:678
#, no-wrap
msgid ""
"apt-get install <replaceable>package-name</replaceable>\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:567
+#: apt_preferences.5.xml:569
msgid ""
"With a suitable &sources-list; file and the above preferences file, any of "
"the following commands will cause APT to upgrade to the latest "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:584
+#: apt_preferences.5.xml:586
#, no-wrap
msgid "apt-get install <replaceable>package</replaceable>/testing\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:578
+#: apt_preferences.5.xml:580
msgid ""
"The following command will cause APT to upgrade the specified package to the "
"latest version from the <literal>testing</literal> distribution; the package "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:590
+#: apt_preferences.5.xml:592
msgid "Tracking Testing or Unstable"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:599
+#: apt_preferences.5.xml:601
#, no-wrap
msgid ""
"Package: *\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:592
+#: apt_preferences.5.xml:594
msgid ""
"The following APT preferences file will cause APT to assign a high priority "
"to package versions from the <literal>testing</literal> distribution, a "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:613
+#: apt_preferences.5.xml:615
msgid ""
"With a suitable &sources-list; file and the above preferences file, any of "
"the following commands will cause APT to upgrade to the latest "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:633
+#: apt_preferences.5.xml:635
#, no-wrap
msgid "apt-get install <replaceable>package</replaceable>/unstable\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:624
+#: apt_preferences.5.xml:626
msgid ""
"The following command will cause APT to upgrade the specified package to the "
"latest version from the <literal>unstable</literal> distribution. "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt_preferences.5.xml:640
+#: apt_preferences.5.xml:642
msgid "Tracking the evolution of a codename release"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:654
+#: apt_preferences.5.xml:656
#, no-wrap
msgid ""
"Explanation: Uninstall or do not install any Debian-originated package "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:642
+#: apt_preferences.5.xml:644
msgid ""
"The following APT preferences file will cause APT to assign a priority "
"higher than the default (500) to all package versions belonging to a "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:671
+#: apt_preferences.5.xml:673
msgid ""
"With a suitable &sources-list; file and the above preferences file, any of "
"the following commands will cause APT to upgrade to the latest version(s) in "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt_preferences.5.xml:691
+#: apt_preferences.5.xml:693
#, no-wrap
msgid "apt-get install <replaceable>package</replaceable>/sid\n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt_preferences.5.xml:682
+#: apt_preferences.5.xml:684
msgid ""
"The following command will cause APT to upgrade the specified package to the "
"latest version from the <literal>sid</literal> distribution. Thereafter, "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt_preferences.5.xml:706
+#: apt_preferences.5.xml:708
msgid "&apt-get; &apt-cache; &apt-conf; &sources-list;"
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: sources.list.5.xml:33
+#: sources.list.5.xml:35
msgid "List of configured APT data sources"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:38
+#: sources.list.5.xml:40
msgid ""
"The source list <filename>/etc/apt/sources.list</filename> is designed to "
"support any number of active sources and a variety of source media. The file "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:45
+#: sources.list.5.xml:47
msgid ""
"Each line specifying a source starts with type "
"(e.g. <literal>deb-src</literal>) followed by options and arguments for "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: sources.list.5.xml:53
+#: sources.list.5.xml:55
msgid "sources.list.d"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:54
+#: sources.list.5.xml:56
msgid ""
"The <filename>/etc/apt/sources.list.d</filename> directory provides a way to "
"add sources.list entries in separate files. The format is the same as for "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: sources.list.5.xml:65
+#: sources.list.5.xml:67
msgid "The deb and deb-src types"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:66
+#: sources.list.5.xml:68
msgid ""
"The <literal>deb</literal> type references a typical two-level Debian "
"archive, <filename>distribution/component</filename>. The "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:78
+#: sources.list.5.xml:79
msgid ""
"The format for a <filename>sources.list</filename> entry using the "
"<literal>deb</literal> and <literal>deb-src</literal> types is:"
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:81
+#: sources.list.5.xml:82
+#, no-wrap
+msgid "deb [ options ] uri suite [component1] [component2] [...]"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml:86
#, no-wrap
-msgid "deb [ options ] uri distribution [component1] [component2] [...]"
+msgid ""
+" Types: deb deb-src\n"
+" URIs: http://example.com\n"
+" Suites: stable testing\n"
+" Sections: component1 component2\n"
+" Description: short\n"
+" long long long\n"
+" [option1]: [option1-value]\n"
+"\n"
+" Types: deb\n"
+" URIs: http://another.example.com\n"
+" Suites: experimental\n"
+" Sections: component1 component2\n"
+" Enabled: no\n"
+" Description: short\n"
+" long long long\n"
+" [option1]: [option1-value]\n"
+" "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:83
+#: sources.list.5.xml:84
+msgid ""
+"Alternatively a rfc822 style format is also supported: <placeholder "
+"type=\"literallayout\" id=\"0\"/>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:105
msgid ""
"The URI for the <literal>deb</literal> type must specify the base of the "
"Debian distribution, from which APT will find the information it needs. "
-"<literal>distribution</literal> can specify an exact path, in which case the "
-"components must be omitted and <literal>distribution</literal> must end with "
-"a slash (<literal>/</literal>). This is useful for the case when only a "
+"<literal>suite</literal> can specify an exact path, in which case the "
+"components must be omitted and <literal>suite</literal> must end with a "
+"slash (<literal>/</literal>). This is useful for the case when only a "
"particular sub-section of the archive denoted by the URI is of interest. If "
-"<literal>distribution</literal> does not specify an exact path, at least one "
+"<literal>suite</literal> does not specify an exact path, at least one "
"<literal>component</literal> must be present."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:92
+#: sources.list.5.xml:114
msgid ""
-"<literal>distribution</literal> may also contain a variable, "
+"<literal>suite</literal> may also contain a variable, "
"<literal>$(ARCH)</literal> which expands to the Debian architecture (such as "
"<literal>amd64</literal> or <literal>armel</literal>) used on the "
"system. This permits architecture-independent "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:100
+#: sources.list.5.xml:122
msgid ""
-"Since only one distribution can be specified per line it may be necessary to "
-"have multiple lines for the same URI, if a subset of all available "
-"distributions or components at that location is desired. APT will sort the "
-"URI list after it has generated a complete set internally, and will collapse "
-"multiple references to the same Internet host, for instance, into a single "
-"connection, so that it does not inefficiently establish an FTP connection, "
-"close it, do something else, and then re-establish a connection to that same "
-"host. This feature is useful for accessing busy FTP sites with limits on the "
-"number of simultaneous anonymous users. APT also parallelizes connections to "
-"different hosts to more effectively deal with sites with low bandwidth."
+"In the traditional style sources.list format since only one distribution can "
+"be specified per line it may be necessary to have multiple lines for the "
+"same URI, if a subset of all available distributions or components at that "
+"location is desired. APT will sort the URI list after it has generated a "
+"complete set internally, and will collapse multiple references to the same "
+"Internet host, for instance, into a single connection, so that it does not "
+"inefficiently establish an FTP connection, close it, do something else, and "
+"then re-establish a connection to that same host. This feature is useful for "
+"accessing busy FTP sites with limits on the number of simultaneous anonymous "
+"users. APT also parallelizes connections to different hosts to more "
+"effectively deal with sites with low bandwidth."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:112
+#: sources.list.5.xml:136
msgid ""
"<literal>options</literal> is always optional and needs to be surrounded by "
"square brackets. It can consist of multiple settings in the form "
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: sources.list.5.xml:117
+#: sources.list.5.xml:142
msgid ""
"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</replaceable>,…</literal> "
"can be used to specify for which architectures information should be "
msgstr ""
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: sources.list.5.xml:121
+#: sources.list.5.xml:146
+msgid ""
+"<literal>arch+=<replaceable>arch1</replaceable>,<replaceable>arch2</replaceable>,…</literal> "
+"and "
+"<literal>arch-=<replaceable>arch1</replaceable>,<replaceable>arch2</replaceable>,…</literal> "
+"which can be used to add/remove architectures from the set which will be "
+"downloaded."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml:149
msgid ""
"<literal>trusted=yes</literal> can be set to indicate that packages from "
"this source are always authenticated even if the "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:128
+#: sources.list.5.xml:156
msgid ""
"It is important to list sources in order of preference, with the most "
"preferred source listed first. Typically this will result in sorting by "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:133
+#: sources.list.5.xml:161
msgid "Some examples:"
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:135
+#: sources.list.5.xml:163
#, no-wrap
msgid ""
"deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n"
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: sources.list.5.xml:141
+#: sources.list.5.xml:169
msgid "URI specification"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:143
+#: sources.list.5.xml:171
msgid "The currently recognized URI types are:"
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:147
+#: sources.list.5.xml:175
msgid ""
"The file scheme allows an arbitrary directory in the file system to be "
"considered an archive. This is useful for NFS mounts and local mirrors or "
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:154
+#: sources.list.5.xml:182
msgid ""
"The cdrom scheme allows APT to use a local CD-ROM drive with media "
"swapping. Use the &apt-cdrom; program to create cdrom entries in the source "
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:161
+#: sources.list.5.xml:189
msgid ""
"The http scheme specifies an HTTP server for the archive. If an environment "
"variable <envar>http_proxy</envar> is set with the format "
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:172
+#: sources.list.5.xml:200
msgid ""
"The ftp scheme specifies an FTP server for the archive. APT's FTP behavior "
"is highly configurable; for more information see the &apt-conf; manual "
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:184
+#: sources.list.5.xml:212
msgid ""
"The copy scheme is identical to the file scheme except that packages are "
"copied into the cache directory instead of used directly at their location. "
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:191
+#: sources.list.5.xml:219
msgid ""
"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access "
"the files as a given user. Prior configuration of rhosts or RSA keys is "
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: sources.list.5.xml:198
+#: sources.list.5.xml:226
msgid "adding more recognizable URI types"
msgstr ""
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:200
+#: sources.list.5.xml:228
msgid ""
"APT can be extended with more methods shipped in other optional packages, "
"which should follow the naming scheme "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:212
+#: sources.list.5.xml:240
msgid ""
"Uses the archive stored locally (or NFS mounted) at /home/jason/debian for "
"stable/main, stable/contrib, and stable/non-free."
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:214
+#: sources.list.5.xml:242
#, no-wrap
msgid "deb file:/home/jason/debian stable main contrib non-free"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:216
+#: sources.list.5.xml:244
msgid "As above, except this uses the unstable (development) distribution."
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:217
+#: sources.list.5.xml:245
#, no-wrap
msgid "deb file:/home/jason/debian unstable main contrib non-free"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:219
+#: sources.list.5.xml:247
msgid "Source line for the above"
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:220
+#: sources.list.5.xml:248
#, no-wrap
msgid "deb-src file:/home/jason/debian unstable main contrib non-free"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:222
+#: sources.list.5.xml:250
msgid ""
"The first line gets package information for the architectures in "
"<literal>APT::Architectures</literal> while the second always retrieves "
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:224
+#: sources.list.5.xml:252
#, no-wrap
msgid ""
"deb http://ftp.debian.org/debian &stable-codename; main\n"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:227
+#: sources.list.5.xml:255
msgid ""
"Uses HTTP to access the archive at archive.debian.org, and uses only the "
"hamm/main area."
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:229
+#: sources.list.5.xml:257
#, no-wrap
msgid "deb http://archive.debian.org/debian-archive hamm main"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:231
+#: sources.list.5.xml:259
msgid ""
"Uses FTP to access the archive at ftp.debian.org, under the debian "
"directory, and uses only the &stable-codename;/contrib area."
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:233
+#: sources.list.5.xml:261
#, no-wrap
msgid "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:235
+#: sources.list.5.xml:263
msgid ""
"Uses FTP to access the archive at ftp.debian.org, under the debian "
"directory, and uses only the unstable/contrib area. If this line appears as "
msgstr ""
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:239
+#: sources.list.5.xml:267
#, no-wrap
msgid "deb ftp://ftp.debian.org/debian unstable contrib"
msgstr ""
#. type: Content of: <refentry><refsect1><para><literallayout>
-#: sources.list.5.xml:248
+#: sources.list.5.xml:276
#, no-wrap
msgid "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:241
+#: sources.list.5.xml:269
msgid ""
"Uses HTTP to access the archive at ftp.tlh.debian.org, under the universe "
"directory, and uses only files found under "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:253
+#: sources.list.5.xml:281
msgid "&apt-cache; &apt-conf;"
msgstr ""
#. type: Content of: <refentry><refmeta><manvolnum>
-#: apt-extracttemplates.1.xml:26 apt-sortpkgs.1.xml:26 apt-ftparchive.1.xml:26
+#: apt-extracttemplates.1.xml:28 apt-sortpkgs.1.xml:28 apt-ftparchive.1.xml:28
msgid "1"
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-extracttemplates.1.xml:33
+#: apt-extracttemplates.1.xml:35
msgid ""
"Utility to extract <command>debconf</command> config and templates from "
"Debian packages"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-extracttemplates.1.xml:39
+#: apt-extracttemplates.1.xml:41
msgid ""
"<command>apt-extracttemplates</command> will take one or more Debian package "
"files as input and write out (to a temporary directory) all associated "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-extracttemplates.1.xml:44
+#: apt-extracttemplates.1.xml:46
msgid "package version template-file config-script"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-extracttemplates.1.xml:45
+#: apt-extracttemplates.1.xml:47
msgid ""
"template-file and config-script are written to the temporary directory "
"specified by the <option>-t</option> or <option>--tempdir</option> "
"(<literal>APT::ExtractTemplates::TempDir</literal>) directory, with "
-"filenames of the form <filename>package.template.XXXX</filename> and "
-"<filename>package.config.XXXX</filename>"
+"filenames of the form <filename>package.template.XXXXXX</filename> and "
+"<filename>package.config.XXXXXX</filename>"
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-extracttemplates.1.xml:58
+#: apt-extracttemplates.1.xml:60
msgid ""
"Temporary directory in which to write extracted <command>debconf</command> "
"template files and config scripts. Configuration Item: "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-extracttemplates.1.xml:75
+#: apt-extracttemplates.1.xml:77
msgid ""
"<command>apt-extracttemplates</command> returns zero on normal operation, "
"decimal 100 on error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-sortpkgs.1.xml:33
+#: apt-sortpkgs.1.xml:35
msgid "Utility to sort package index files"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-sortpkgs.1.xml:39
+#: apt-sortpkgs.1.xml:41
msgid ""
"<command>apt-sortpkgs</command> will take an index file (source index or "
"package index) and sort the records so that they are ordered by the package "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-sortpkgs.1.xml:45
+#: apt-sortpkgs.1.xml:47
msgid "All output is sent to standard output; the input must be a seekable file."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-sortpkgs.1.xml:54
+#: apt-sortpkgs.1.xml:56
msgid ""
"Use source index field ordering. Configuration Item: "
"<literal>APT::SortPkgs::Source</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-sortpkgs.1.xml:68
+#: apt-sortpkgs.1.xml:70
msgid ""
"<command>apt-sortpkgs</command> returns zero on normal operation, decimal "
"100 on error."
msgstr ""
#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-ftparchive.1.xml:33
+#: apt-ftparchive.1.xml:35
msgid "Utility to generate index files"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:39
+#: apt-ftparchive.1.xml:41
msgid ""
"<command>apt-ftparchive</command> is the command line tool that generates "
"the index files that APT uses to access a distribution source. The index "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:43
+#: apt-ftparchive.1.xml:45
msgid ""
"<command>apt-ftparchive</command> is a superset of the &dpkg-scanpackages; "
"program, incorporating its entire functionality via the "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:49
+#: apt-ftparchive.1.xml:51
msgid ""
"Internally <command>apt-ftparchive</command> can make use of binary "
"databases to cache the contents of a .deb file and it does not rely on any "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:60
+#: apt-ftparchive.1.xml:62
msgid ""
"The packages command generates a package file from a directory tree. It "
"takes the given directory and recursively searches it for .deb files, "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:65 apt-ftparchive.1.xml:89
+#: apt-ftparchive.1.xml:67 apt-ftparchive.1.xml:91
msgid "The option <option>--db</option> can be used to specify a binary caching DB."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:70
+#: apt-ftparchive.1.xml:72
msgid ""
"The <literal>sources</literal> command generates a source index file from a "
"directory tree. It takes the given directory and recursively searches it "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:75
+#: apt-ftparchive.1.xml:77
msgid ""
"If an override file is specified then a source override file will be looked "
"for with an extension of .src. The --source-override option can be used to "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:82
+#: apt-ftparchive.1.xml:84
msgid ""
"The <literal>contents</literal> command generates a contents file from a "
"directory tree. It takes the given directory and recursively searches it for "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:94
+#: apt-ftparchive.1.xml:96
msgid ""
"The <literal>release</literal> command generates a Release file from a "
"directory tree. It recursively searches the given directory for uncompressed "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:104
+#: apt-ftparchive.1.xml:106
msgid ""
"Values for the additional metadata fields in the Release file are taken from "
"the corresponding variables under "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:117
+#: apt-ftparchive.1.xml:119
msgid ""
"The <literal>generate</literal> command is designed to be runnable from a "
"cron script and builds indexes according to the given config file. The "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:126
+#: apt-ftparchive.1.xml:128
msgid ""
"The <literal>clean</literal> command tidies the databases used by the given "
"configuration file by removing any records that are no longer necessary."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-ftparchive.1.xml:132
+#: apt-ftparchive.1.xml:134
msgid "The Generate Configuration"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:134
+#: apt-ftparchive.1.xml:136
msgid ""
"The <literal>generate</literal> command uses a configuration file to "
"describe the archives that are going to be generated. It follows the typical "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:142
+#: apt-ftparchive.1.xml:144
msgid "The generate configuration has four separate sections, each described below."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt-ftparchive.1.xml:144
+#: apt-ftparchive.1.xml:146
msgid "<literal>Dir</literal> Section"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:146
+#: apt-ftparchive.1.xml:148
msgid ""
"The <literal>Dir</literal> section defines the standard directories needed "
"to locate the files required during the generation process. These "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:153
+#: apt-ftparchive.1.xml:155
msgid ""
"Specifies the root of the FTP archive, in a standard Debian configuration "
"this is the directory that contains the <filename>ls-LR</filename> and dist "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:160
+#: apt-ftparchive.1.xml:162
msgid "Specifies the location of the override files."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:165
+#: apt-ftparchive.1.xml:167
msgid "Specifies the location of the cache files."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:170
+#: apt-ftparchive.1.xml:172
msgid ""
"Specifies the location of the file list files, if the "
"<literal>FileList</literal> setting is used below."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt-ftparchive.1.xml:176
+#: apt-ftparchive.1.xml:178
msgid "<literal>Default</literal> Section"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:178
+#: apt-ftparchive.1.xml:180
msgid ""
"The <literal>Default</literal> section specifies default values, and "
"settings that control the operation of the generator. Other sections may "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:184
+#: apt-ftparchive.1.xml:186
msgid ""
"Sets the default compression schemes to use for the package index files. It "
"is a string that contains a space separated list of at least one of: '.' (no "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:192
+#: apt-ftparchive.1.xml:194
msgid ""
"Sets the default list of file extensions that are package files. This "
"defaults to '.deb'."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:198
+#: apt-ftparchive.1.xml:200
msgid ""
"This is similar to <literal>Packages::Compress</literal> except that it "
"controls the compression for the Sources files."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:204
+#: apt-ftparchive.1.xml:206
msgid ""
"Sets the default list of file extensions that are source files. This "
"defaults to '.dsc'."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:210
+#: apt-ftparchive.1.xml:212
msgid ""
"This is similar to <literal>Packages::Compress</literal> except that it "
"controls the compression for the Contents files."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:216
+#: apt-ftparchive.1.xml:218
msgid ""
"This is similar to <literal>Packages::Compress</literal> except that it "
"controls the compression for the Translation-en master file."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:222
+#: apt-ftparchive.1.xml:224
msgid ""
"Specifies the number of kilobytes to delink (and replace with hard links) "
"per run. This is used in conjunction with the per-section "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:229
+#: apt-ftparchive.1.xml:231
msgid ""
"Specifies the mode of all created index files. It defaults to 0644. All "
"index files are set to this mode with no regard to the umask."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:236 apt-ftparchive.1.xml:382
+#: apt-ftparchive.1.xml:238 apt-ftparchive.1.xml:384
msgid ""
"Specifies whether long descriptions should be included in the "
"<filename>Packages</filename> file or split out into a master "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt-ftparchive.1.xml:242
+#: apt-ftparchive.1.xml:244
msgid "<literal>TreeDefault</literal> Section"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:244
+#: apt-ftparchive.1.xml:246
msgid ""
"Sets defaults specific to <literal>Tree</literal> sections. All of these "
"variables are substitution variables and have the strings $(DIST), "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:251
+#: apt-ftparchive.1.xml:253
msgid ""
"Sets the number of kilobytes of contents files that are generated each "
"day. The contents files are round-robined so that over several days they "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:258
+#: apt-ftparchive.1.xml:260
msgid ""
"Controls the number of days a contents file is allowed to be checked without "
"changing. If this limit is passed the mtime of the contents file is "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:269
+#: apt-ftparchive.1.xml:271
msgid ""
"Sets the top of the .deb directory tree. Defaults to "
"<filename>$(DIST)/$(SECTION)/binary-$(ARCH)/</filename>"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:275
+#: apt-ftparchive.1.xml:277
msgid ""
"Sets the top of the source package directory tree. Defaults to "
"<filename>$(DIST)/$(SECTION)/source/</filename>"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:281
+#: apt-ftparchive.1.xml:283
msgid ""
"Sets the output Packages file. Defaults to "
"<filename>$(DIST)/$(SECTION)/binary-$(ARCH)/Packages</filename>"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:287
+#: apt-ftparchive.1.xml:289
msgid ""
"Sets the output Sources file. Defaults to "
"<filename>$(DIST)/$(SECTION)/source/Sources</filename>"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:293
+#: apt-ftparchive.1.xml:295
msgid ""
"Sets the output Translation-en master file with the long descriptions if "
"they should be not included in the Packages file. Defaults to "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:300
+#: apt-ftparchive.1.xml:302
msgid ""
"Sets the path prefix that causes a symlink to be considered an internal link "
"instead of an external link. Defaults to "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:307
+#: apt-ftparchive.1.xml:309
msgid ""
"Sets the output Contents file. Defaults to "
"<filename>$(DIST)/$(SECTION)/Contents-$(ARCH)</filename>. If this setting "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:316
+#: apt-ftparchive.1.xml:318
msgid "Sets header file to prepend to the contents output."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:321
+#: apt-ftparchive.1.xml:323
msgid ""
"Sets the binary cache database to use for this section. Multiple sections "
"can share the same database."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:327
+#: apt-ftparchive.1.xml:329
msgid ""
"Specifies that instead of walking the directory tree, "
"<command>apt-ftparchive</command> should read the list of files from the "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:334
+#: apt-ftparchive.1.xml:336
msgid ""
"Specifies that instead of walking the directory tree, "
"<command>apt-ftparchive</command> should read the list of files from the "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt-ftparchive.1.xml:342
+#: apt-ftparchive.1.xml:344
msgid "<literal>Tree</literal> Section"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:344
+#: apt-ftparchive.1.xml:346
msgid ""
"The <literal>Tree</literal> section defines a standard Debian file tree "
"which consists of a base directory, then multiple sections in that base "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:349
+#: apt-ftparchive.1.xml:351
msgid ""
"The <literal>Tree</literal> section takes a scope tag which sets the "
"<literal>$(DIST)</literal> variable and defines the root of the tree (the "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:354
+#: apt-ftparchive.1.xml:356
msgid ""
"All of the settings defined in the <literal>TreeDefault</literal> section "
"can be used in a <literal>Tree</literal> section as well as three new "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
-#: apt-ftparchive.1.xml:360
+#: apt-ftparchive.1.xml:362
#, no-wrap
msgid ""
"for i in Sections do \n"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:357
+#: apt-ftparchive.1.xml:359
msgid ""
"When processing a <literal>Tree</literal> section "
"<command>apt-ftparchive</command> performs an operation similar to: "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:368
+#: apt-ftparchive.1.xml:370
msgid ""
"This is a space separated list of sections which appear under the "
"distribution; typically this is something like <literal>main contrib "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:375
+#: apt-ftparchive.1.xml:377
msgid ""
"This is a space separated list of all the architectures that appear under "
"search section. The special architecture 'source' is used to indicate that "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:388
+#: apt-ftparchive.1.xml:390
msgid ""
"Sets the binary override file. The override file contains section, priority "
"and maintainer address information."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:394
+#: apt-ftparchive.1.xml:396
msgid ""
"Sets the source override file. The override file contains section "
"information."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:400 apt-ftparchive.1.xml:446
+#: apt-ftparchive.1.xml:402 apt-ftparchive.1.xml:448
msgid "Sets the binary extra override file."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:405 apt-ftparchive.1.xml:451
+#: apt-ftparchive.1.xml:407 apt-ftparchive.1.xml:453
msgid "Sets the source extra override file."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt-ftparchive.1.xml:410
+#: apt-ftparchive.1.xml:412
msgid "<literal>BinDirectory</literal> Section"
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt-ftparchive.1.xml:412
+#: apt-ftparchive.1.xml:414
msgid ""
"The <literal>bindirectory</literal> section defines a binary directory tree "
"with no special structure. The scope tag specifies the location of the "
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:420
+#: apt-ftparchive.1.xml:422
msgid "Sets the Packages file output."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:425
+#: apt-ftparchive.1.xml:427
msgid ""
"Sets the Sources file output. At least one of <literal>Packages</literal> or "
"<literal>Sources</literal> is required."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:431
+#: apt-ftparchive.1.xml:433
msgid "Sets the Contents file output (optional)."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:436
+#: apt-ftparchive.1.xml:438
msgid "Sets the binary override file."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:441
+#: apt-ftparchive.1.xml:443
msgid "Sets the source override file."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:456
+#: apt-ftparchive.1.xml:458
msgid "Sets the cache DB."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:461
+#: apt-ftparchive.1.xml:463
msgid "Appends a path to all the output paths."
msgstr ""
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:466
+#: apt-ftparchive.1.xml:468
msgid "Specifies the file list file."
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-ftparchive.1.xml:473
+#: apt-ftparchive.1.xml:475
msgid "The Binary Override File"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:474
+#: apt-ftparchive.1.xml:476
msgid ""
"The binary override file is fully compatible with &dpkg-scanpackages;. It "
"contains four fields separated by spaces. The first field is the package "
msgstr ""
#. type: Content of: <refentry><refsect1><para><literallayout>
-#: apt-ftparchive.1.xml:480
+#: apt-ftparchive.1.xml:482
#, no-wrap
msgid "old [// oldn]* => new"
msgstr ""
#. type: Content of: <refentry><refsect1><para><literallayout>
-#: apt-ftparchive.1.xml:482
+#: apt-ftparchive.1.xml:484
#, no-wrap
msgid "new"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:479
+#: apt-ftparchive.1.xml:481
msgid ""
"The general form of the maintainer field is: <placeholder "
"type=\"literallayout\" id=\"0\"/> or simply, <placeholder "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-ftparchive.1.xml:490
+#: apt-ftparchive.1.xml:492
msgid "The Source Override File"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:492
+#: apt-ftparchive.1.xml:494
msgid ""
"The source override file is fully compatible with &dpkg-scansources;. It "
"contains two fields separated by spaces. The first field is the source "
msgstr ""
#. type: Content of: <refentry><refsect1><title>
-#: apt-ftparchive.1.xml:497
+#: apt-ftparchive.1.xml:499
msgid "The Extra Override File"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:499
+#: apt-ftparchive.1.xml:501
msgid ""
"The extra override file allows any arbitrary tag to be added or replaced in "
"the output. It has three columns, the first is the package, the second is "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:510
+#: apt-ftparchive.1.xml:512
msgid ""
"Generate the given checksum. These options default to on, when turned off "
"the generated index files will not have the checksum fields where possible. "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:521
+#: apt-ftparchive.1.xml:523
msgid ""
"Use a binary caching DB. This has no effect on the generate command. "
"Configuration Item: <literal>APT::FTPArchive::DB</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:527
+#: apt-ftparchive.1.xml:529
msgid ""
"Quiet; produces output suitable for logging, omitting progress indicators. "
"More q's will produce more quiet up to a maximum of 2. You can also use "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:535
+#: apt-ftparchive.1.xml:537
msgid ""
"Perform Delinking. If the <literal>External-Links</literal> setting is used "
"then this option actually enables delinking of the files. It defaults to on "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:543
+#: apt-ftparchive.1.xml:545
msgid ""
"Perform contents generation. When this option is set and package indexes are "
"being generated with a cache DB then the file listing will also be extracted "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:553
+#: apt-ftparchive.1.xml:555
msgid ""
"Select the source override file to use with the <literal>sources</literal> "
"command. Configuration Item: "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:559
+#: apt-ftparchive.1.xml:561
msgid ""
"Make the caching databases read only. Configuration Item: "
"<literal>APT::FTPArchive::ReadOnlyDB</literal>."
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:564
+#: apt-ftparchive.1.xml:566
msgid ""
"Accept in the <literal>packages</literal> and <literal>contents</literal> "
"commands only package files matching <literal>*_arch.deb</literal> or "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:572
+#: apt-ftparchive.1.xml:574
msgid ""
"&apt-ftparchive; caches as much as possible of metadata in a cachedb. If "
"packages are recompiled and/or republished with the same version again, this "
msgstr ""
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-ftparchive.1.xml:584
+#: apt-ftparchive.1.xml:586
msgid ""
"This configuration option defaults to \"<literal>true</literal>\" and should "
"only be set to <literal>\"false\"</literal> if the Archive generated with "
msgstr ""
#. type: Content of: <refentry><refsect1><para><programlisting>
-#: apt-ftparchive.1.xml:602
+#: apt-ftparchive.1.xml:604
#, no-wrap
msgid ""
"<command>apt-ftparchive</command> packages "
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:598
+#: apt-ftparchive.1.xml:600
msgid ""
"To create a compressed Packages file for a directory containing binary "
"packages (.deb): <placeholder type=\"programlisting\" id=\"0\"/>"
msgstr ""
#. type: Content of: <refentry><refsect1><para>
-#: apt-ftparchive.1.xml:612
+#: apt-ftparchive.1.xml:614
msgid ""
"<command>apt-ftparchive</command> returns zero on normal operation, decimal "
"100 on error."
msgstr ""
-#. type: TH
-#: apt.8:17
-#, no-wrap
-msgid "apt"
-msgstr ""
-
-#. type: TH
-#: apt.8:17
-#, no-wrap
-msgid "16 June 1998"
-msgstr ""
-
-#. type: TH
-#: apt.8:17
-#, no-wrap
-msgid "Debian"
-msgstr ""
-
-#. type: SH
-#: apt.8:18
-#, no-wrap
-msgid "NAME"
-msgstr ""
-
-#. type: Plain text
-#: apt.8:20
-msgid "apt - Advanced Package Tool"
-msgstr ""
-
-#. type: SH
-#: apt.8:20
-#, no-wrap
-msgid "SYNOPSIS"
-msgstr ""
-
-#. type: Plain text
-#: apt.8:22
-msgid "B<apt>"
-msgstr ""
-
-#. type: SH
-#: apt.8:22
-#, no-wrap
-msgid "DESCRIPTION"
-msgstr ""
-
-#. type: Plain text
-#: apt.8:31
-msgid ""
-"APT is a management system for software packages. For normal day to day "
-"package management there are several frontends available, such as "
-"B<aptitude>(8) for the command line or B<synaptic>(8) for the X Window "
-"System. Some options are only implemented in B<apt-get>(8) though."
-msgstr ""
-
-#. type: SH
-#: apt.8:31
-#, no-wrap
-msgid "SEE ALSO"
-msgstr ""
-
-#. type: Plain text
-#: apt.8:38
-msgid ""
-"B<apt-cache>(8), B<apt-get>(8), B<apt.conf>(5), B<sources.list>(5), "
-"B<apt_preferences>(5), B<apt-secure>(8)"
-msgstr ""
-
-#. type: SH
-#: apt.8:38
-#, no-wrap
-msgid "DIAGNOSTICS"
-msgstr ""
-
-#. type: Plain text
-#: apt.8:40
-msgid "apt returns zero on normal operation, decimal 100 on error."
-msgstr ""
-
-#. type: SH
-#: apt.8:40
-#, no-wrap
-msgid "BUGS"
-msgstr ""
-
-#. type: Plain text
-#: apt.8:42
-msgid "This manpage isn't even started."
-msgstr ""
-
-#. type: Plain text
-#: apt.8:51
-msgid ""
-"See E<lt>http://bugs.debian.org/aptE<gt>. If you wish to report a bug in "
-"B<apt>, please see I</usr/share/doc/debian/bug-reporting.txt> or the "
-"B<reportbug>(1) command."
-msgstr ""
-
-#. type: SH
-#: apt.8:51
-#, no-wrap
-msgid "AUTHOR"
-msgstr ""
-
-#. type: Plain text
-#: apt.8:52
-msgid "apt was written by the APT team E<lt>apt@packages.debian.orgE<gt>."
-msgstr ""
-
#. type: <title></title>
#: guide.sgml:4
msgid "APT User's Guide"
projects / apt.git / blobdiff