# Sample debian/rules that uses debhelper. GNU copyright 1997 by Joey Hess.
# Some lines taken from debmake, by Christoph Lameter.
+# build in verbose mode by default to make it easy to diangose issues
+export NOISY=1
+
export DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
export DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
export DEB_HOST_MULTIARCH ?= $(shell dpkg-architecture -qDEB_HOST_MULTIARCH)
+export PARALLEL = $(or $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS))),1)
# FOR AUTOCONF 2.52 AND NEWER ONLY
ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
confflags += --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE)
endif
+# Set the number of procs to be run in parallel from the options.
+confflags += --with-procs=$(PARALLEL)
+
# See below
-include build/environment.mak
ifneq (,$(shell which dpkg-buildflags))
- export CXXFLAGS = $(shell dpkg-buildflags --get CXXFLAGS)
- export LDFLAGS = $(shell dpkg-buildflags --get LDFLAGS)
- export CPPFLAGS = $(shell dpkg-buildflags --get CPPFLAGS)
+ # make does not export to $(shell) so we need to workaround
+ # (http://savannah.gnu.org/bugs/?10593)
+ dpkg_buildflags = DEB_BUILD_MAINT_OPTIONS=hardening=+all dpkg-buildflags
+ export CXXFLAGS = $(shell $(dpkg_buildflags) --get CXXFLAGS)
+ export LDFLAGS = $(shell $(dpkg_buildflags) --get LDFLAGS)
+ export CPPFLAGS = $(shell $(dpkg_buildflags) --get CPPFLAGS)
else
ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
export CXXFLAGS = -O0 -g -Wall
override BLD := ./build
endif
+# When building without <nocheck>, the header is available and thus the test is
+# successful. When building with <nocheck>, the header is missing, but we still
+# pretend it to be available, because configure would fail otherwise.
+export ac_cv_header_gtest_gtest_h=yes
+
# APT Programs in apt-utils
APT_UTILS=ftparchive sortpkgs extracttemplates
# do not fail as we are just experimenting with symbol files for now
export DPKG_GENSYMBOLS_CHECK_LEVEL=0
-build: build/build-stamp
-build-debiandoc: build/build-debiandoc-stamp
+build-binary: build/build-binary-stamp
+build-docbook: build/build-docbook-stamp
build-manpages: build/build-manpages-stamp
# Note that this is unconditionally done first as part of loading environment.mak
build/environment.mak: build/configure-stamp
@true
-configure: configure.in
-build/configure-stamp: configure
+configure: configure.ac
+build/configure-stamp: configure buildlib/config.sub buildlib/config.guess
dh_testdir
- -mkdir build
+ mkdir -p build
cp COPYING debian/copyright
cd build && CXXFLAGS="$(CXXFLAGS)" LDFLAGS="$(LDFLAGS)" CPPFLAGS="$(CPPFLAGS)" ../configure $(confflags)
touch $@
-build/build-stamp: build/configure-stamp
+build/build-binary-stamp: build/configure-stamp
# Add here commands to compile the package.
$(MAKE) binary
# compat symlink for the locale split
endif
touch $@
-build/build-debiandoc-stamp: build/configure-stamp
+build/build-docbook-stamp: build/configure-stamp
# Add here commands to compile the package.
- $(MAKE) debiandoc
+ $(MAKE) docbook
touch $@
build/build-manpages-stamp: build/configure-stamp
clean:
dh_testdir
+ dh_clean
[ ! -f Makefile ] || $(MAKE) clean distclean
rm -rf build
rm -f debian/$(LIBAPT_PKG).install debian/$(LIBAPT_INST).install \
- debian/libapt-pkg-dev.install
+ debian/libapt-pkg-dev.install debian/apt.install
+ test ! -L buildlib/config.guess || rm -f buildlib/config.guess
+ test ! -L buildlib/config.sub || rm -f buildlib/config.sub
debian/%.install: debian/%.install.in
sed 's/@DEB_HOST_MULTIARCH@/$(DEB_HOST_MULTIARCH)/g' $< > $@
-binary-indep: apt-doc libapt-pkg-doc
# Build architecture-independent files here.
-libapt-pkg-doc: build-debiandoc
+libapt-pkg-doc: build-docbook
dh_testdir -p$@
dh_testroot -p$@
dh_prep -p$@
#
# libapt-pkg-doc install
#
+ rm -f $(BLD)/doc/doxygen/html/*.map $(BLD)/doc/doxygen/html/*.md5
dh_installdocs -p$@ $(BLD)/docs/design* \
$(BLD)/docs/dpkg-tech* \
$(BLD)/docs/files* \
dh_installchangelogs -p$@
dh_strip -p$@
- dh_compress -p$@
+ dh_compress -p$@ -X.xhtml
dh_fixperms -p$@
dh_installdeb -p$@
dh_gencontrol -p$@
dh_md5sums -p$@
dh_builddeb -p$@
-apt-doc: build-debiandoc
+apt-doc: build-docbook
dh_testdir -p$@
dh_testroot -p$@
dh_prep -p$@
# Build architecture-dependent files here.
-binary-arch: $(LIBAPT_PKG) $(LIBAPT_INST) apt libapt-pkg-dev apt-utils apt-transport-https
apt_MANPAGES = apt apt-cache apt-cdrom apt-config apt-get apt-key apt-mark apt-secure apt apt.conf apt_preferences sources.list
-apt: build build-manpages
+apt: build-binary build-manpages debian/apt.install
dh_testdir -p$@
dh_testroot -p$@
dh_prep -p$@
# apt install
#
cp debian/apt.conf.autoremove debian/$@/etc/apt/apt.conf.d/01autoremove
+ cp debian/apt.auto-removal.sh debian/$@/etc/kernel/postinst.d/apt-auto-removal
+ chmod 755 debian/$@/etc/kernel/postinst.d/apt-auto-removal
+ # install vendor specific apt confs
+ find -L vendor/current -name 'apt.conf-*' | while read conf; do cp "$${conf}" "debian/$@/etc/apt/apt.conf.d/$${conf#*-}"; done
# make rosetta happy and remove pot files in po/ (but leave stuff
# in po/domains/* untouched) and cp *.po into each domain dir
#mv debian/$@/usr/bin/apt-report-mirror-failure \
# debian/$@/usr/lib/apt/apt-report-mirror-failure \
+ # move the apt-helper in place
+ mv debian/$@/usr/bin/apt-helper debian/$@/usr/lib/apt/apt-helper
+ # install apt.systemd.daily helper in the right place
+ install -m755 debian/apt.systemd.daily debian/$@/usr/lib/apt/
+
dh_bugfiles -p$@
dh_lintian -p$@
dh_installexamples -p$@ $(BLD)/docs/examples/*
- dh_installman -p$@ $(wildcard $(patsubst %,doc/%.[158],$(apt_MANPAGES)) $(patsubst %,doc/*/%.*.[158],$(apt_MANPAGES)))
- dh_installcron -p$@
+ dh_installman -p$@ $(wildcard $(patsubst %,doc/en/%.[158],$(apt_MANPAGES)) $(patsubst %,doc/*/%.*.[158],$(apt_MANPAGES)))
+ dh_installcron -p$@ --name=apt-compat
+ dh_systemd_enable -p$@ apt-daily.timer
+ dh_systemd_start -p$@ apt-daily.timer
dh_installdocs -p$@
dh_installchangelogs -p$@
dh_installlogrotate -p$@
dh_strip -p$@
dh_compress -p$@
dh_fixperms -p$@
+ dh_makeshlibs -p$@
dh_installdeb -p$@
dh_shlibdeps -p$@
- dh_gencontrol -p$@
+ dh_gencontrol -p$@ -- -Vapt:keyring="$(shell ./vendor/getinfo keyring-package)"
dh_md5sums -p$@
dh_builddeb -p$@
-libapt-pkg-dev: build debian/libapt-pkg-dev.install
+libapt-pkg-dev: build-binary debian/libapt-pkg-dev.install
dh_testdir -p$@
dh_testroot -p$@
dh_prep -p$@
dh_builddeb -p$@
apt-utils_MANPAGES = apt-sortpkgs apt-ftparchive apt-extracttemplates
-apt-utils: build build-manpages
+apt-utils: build-binary build-manpages
dh_testdir -p$@
dh_testroot -p$@
dh_prep -p$@
dh_installexamples -p$@
# Install the man pages..
- dh_installman -p$@ $(wildcard $(patsubst %,doc/%.[158],$(apt-utils_MANPAGES)) $(patsubst %,doc/*/%.*.[158],$(apt-utils_MANPAGES)))
+ dh_installman -p$@ $(wildcard $(patsubst %,doc/en/%.[158],$(apt-utils_MANPAGES)) $(patsubst %,doc/*/%.*.[158],$(apt-utils_MANPAGES)))
dh_installchangelogs -p$@
dh_strip -p$@
dh_md5sums -p$@
dh_builddeb -p$@
-$(LIBAPT_PKG): build debian/$(LIBAPT_PKG).install
+$(LIBAPT_PKG): build-binary debian/$(LIBAPT_PKG).install
dh_testdir -p$@
dh_testroot -p$@
dh_prep -p$@
dh_md5sums -p$@
dh_builddeb -p$@
-$(LIBAPT_INST): build debian/$(LIBAPT_INST).install
+$(LIBAPT_INST): build-binary debian/$(LIBAPT_INST).install
dh_testdir -p$@
dh_testroot -p$@
dh_prep -p$@
dh_md5sums -p$@
dh_builddeb -p$@
-apt-transport-https: build libapt-pkg-dev
+apt-transport-https: build-binary libapt-pkg-dev
dh_testdir -p$@
dh_testroot -p$@
dh_prep -p$@
dh_md5sums -p$@
dh_builddeb -p$@
+buildlib/config.guess buildlib/config.sub:
+ $(MAKE) "$@"
+
configure:
$(MAKE) configure
-really-clean: clean
- -find . -name Makefile.in -print0 | xargs --null --no-run-if-empty -- rm -f
- find -name ChangeLog | xargs rm -f
- rm -f l33ch-stamp
-
+# translate targets to targets required by debian-policy
+binary-arch: $(LIBAPT_PKG) $(LIBAPT_INST) apt libapt-pkg-dev apt-utils apt-transport-https
+binary-indep: apt-doc libapt-pkg-doc
binary: binary-indep binary-arch
+build-arch: build-binary
+build-indep: build-manpages build-docbook
+build: build-indep build-arch
+
.PHONY: build clean binary-indep binary-arch binary
projects / apt.git / blobdiff