# Eugenia Franzoni, 2000
# Hugh Hartmann, 2000-2012
# Gabriele Stilli, 2012
-# Beatrice Torracca, 2012
-# Beatrice Torracca <beatricet@libero.it>, 2012.
+# Beatrice Torracca <beatricet@libero.it>, 2012, 2014.
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
-"POT-Creation-Date: 2013-12-07 14:40+0100\n"
-"PO-Revision-Date: 2012-12-23 18:04+0200\n"
+"POT-Creation-Date: 2014-03-14 09:57+0100\n"
+"PO-Revision-Date: 2014-03-15 23:29+0200\n"
"Last-Translator: Beatrice Torracca <beatricet@libero.it>\n"
"Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
"Language: it\n"
#. type: Content of: <refentry><refsect1><para>
#: apt-get.8.xml:41
+#| msgid ""
+#| "<command>apt-get</command> is the command-line tool for handling "
+#| "packages, and may be considered the user's \"back-end\" to other tools "
+#| "using the APT library. Several \"front-end\" interfaces exist, such as "
+#| "&dselect;, &aptitude;, &synaptic; and &wajig;."
msgid ""
"<command>apt-get</command> is the command-line tool for handling packages, "
"and may be considered the user's \"back-end\" to other tools using the APT "
-"library. Several \"front-end\" interfaces exist, such as &dselect;, "
-"&aptitude;, &synaptic; and &wajig;."
+"library. Several \"front-end\" interfaces exist, such as &aptitude;, "
+"&synaptic; and &wajig;."
msgstr ""
"<command>apt-get</command> è lo strumento a riga di comando per gestire "
"pacchetti e può essere considerato il «backend» dell'utente per altri "
"strumenti che usano la libreria APT. Esistono diversi «frontend» per "
-"interfaccia, come &dselect;, &aptitude;, &synaptic; e &wajig;."
+"interfaccia, come &aptitude;, &synaptic; e &wajig;."
#. type: Content of: <refentry><refsect1><para>
#: apt-get.8.xml:46 apt-cache.8.xml:46 apt-cdrom.8.xml:53 apt-config.8.xml:46
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-get.8.xml:217
+#| msgid ""
+#| "<literal>clean</literal> clears out the local repository of retrieved "
+#| "package files. It removes everything but the lock file from "
+#| "<filename>&cachedir;/archives/</filename> and <filename>&cachedir;/"
+#| "archives/partial/</filename>. When APT is used as a &dselect; method, "
+#| "<literal>clean</literal> is run automatically. Those who do not use "
+#| "dselect will likely want to run <literal>apt-get clean</literal> from "
+#| "time to time to free up disk space."
msgid ""
"<literal>clean</literal> clears out the local repository of retrieved "
"package files. It removes everything but the lock file from "
"<filename>&cachedir;/archives/</filename> and <filename>&cachedir;/archives/"
-"partial/</filename>. When APT is used as a &dselect; method, <literal>clean</"
-"literal> is run automatically. Those who do not use dselect will likely "
-"want to run <literal>apt-get clean</literal> from time to time to free up "
-"disk space."
+"partial/</filename>."
msgstr ""
"<literal>clean</literal> ripulisce il repository locale dei file di "
-"pacchetto recuperati. Rimuove tutto da <filename>&cachedir;/archives/</"
-"filename> e <filename>&cachedir;/archives/partial/</filename>, tranne il "
-"file di lock. Quando APT viene usato come metodo per &dselect;, "
-"<literal>clean</literal> viene eseguito automaticamente. Chi non usa dselect "
-"probabilmente è bene che usi <literal>apt-get clean</literal> di quando in "
-"quando per liberare spazio su disco."
+"pacchetto recuperati. Rimuove tutto da "
+"<filename>&cachedir;/archives/</filename> e "
+"<filename>&cachedir;/archives/partial/</filename>, tranne il file di lock."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:227
+#: apt-get.8.xml:224
msgid ""
"Like <literal>clean</literal>, <literal>autoclean</literal> clears out the "
"local repository of retrieved package files. The difference is that it only "
"impedisce che vengano eliminati i pacchetti installati."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:237
+#: apt-get.8.xml:234
msgid ""
"<literal>autoremove</literal> is used to remove packages that were "
"automatically installed to satisfy dependencies for other packages and are "
"pacchetti e che non sono più necessari."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:242
+#: apt-get.8.xml:239
msgid ""
"<literal>changelog</literal> downloads a package changelog and displays it "
"through <command>sensible-pager</command>. The server name and base "
"opzioni del comando <option>install</option>."
#. type: Content of: <refentry><refsect1><title>
-#: apt-get.8.xml:260 apt-cache.8.xml:250 apt-mark.8.xml:110
+#: apt-get.8.xml:257 apt-cache.8.xml:250 apt-mark.8.xml:110
#: apt-config.8.xml:86 apt-extracttemplates.1.xml:54 apt-sortpkgs.1.xml:50
#: apt-ftparchive.1.xml:506
msgid "options"
msgstr "opzioni"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:265
+#: apt-get.8.xml:262
msgid ""
"Do not consider recommended packages as a dependency for installing. "
"Configuration Item: <literal>APT::Install-Recommends</literal>."
"literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:270
+#: apt-get.8.xml:267
msgid ""
"Consider suggested packages as a dependency for installing. Configuration "
"Item: <literal>APT::Install-Suggests</literal>."
"Voce di configurazione:<literal>APT::Install-Suggests</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:275
+#: apt-get.8.xml:272
msgid ""
"Download only; package files are only retrieved, not unpacked or installed. "
"Configuration Item: <literal>APT::Get::Download-Only</literal>."
"Download-Only</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:280
+#: apt-get.8.xml:277
+#| msgid ""
+#| "Fix; attempt to correct a system with broken dependencies in place. This "
+#| "option, when used with install/remove, can omit any packages to permit "
+#| "APT to deduce a likely solution. If packages are specified, these have to "
+#| "completely correct the problem. The option is sometimes necessary when "
+#| "running APT for the first time; APT itself does not allow broken package "
+#| "dependencies to exist on a system. It is possible that a system's "
+#| "dependency structure can be so corrupt as to require manual intervention "
+#| "(which usually means using &dselect; or <command>dpkg --remove</command> "
+#| "to eliminate some of the offending packages). Use of this option together "
+#| "with <option>-m</option> may produce an error in some situations. "
+#| "Configuration Item: <literal>APT::Get::Fix-Broken</literal>."
msgid ""
"Fix; attempt to correct a system with broken dependencies in place. This "
"option, when used with install/remove, can omit any packages to permit APT "
"running APT for the first time; APT itself does not allow broken package "
"dependencies to exist on a system. It is possible that a system's dependency "
"structure can be so corrupt as to require manual intervention (which usually "
-"means using &dselect; or <command>dpkg --remove</command> to eliminate some "
-"of the offending packages). Use of this option together with <option>-m</"
-"option> may produce an error in some situations. Configuration Item: "
-"<literal>APT::Get::Fix-Broken</literal>."
+"means using <command>dpkg --remove</command> to eliminate some of the "
+"offending packages). Use of this option together with <option>-m</option> "
+"may produce an error in some situations. Configuration Item: <literal>APT::"
+"Get::Fix-Broken</literal>."
msgstr ""
"Aggiusta; cerca di correggere un sistema che ha dipendenze non soddisfatte. "
"Questa opzione, quando usata con install o remove, può omettere qualsiasi "
"volta; APT stesso non permette l'esistenza di pacchetti con dipendenze non "
"soddisfatte in un sistema. È possibile che la struttura di dipendenze di un "
"sistema sia corrotta a tal punto da richiedere un intervento manuale (il che "
-"di solito significa usare &dselect; o <command>dpkg --remove</command> per "
-"eliminare alcuni dei pacchetti che creano problemi). L'uso di questa opzione "
-"insieme a <option>-m</option> può in alcune situazioni produrre un errore. "
-"Voce di configurazione: <literal>APT::Get::Fix-Broken</literal>."
+"di solito significa usare <command>dpkg --remove</command> per eliminare "
+"alcuni dei pacchetti che creano problemi). L'uso di questa opzione insieme a "
+"<option>-m</option> può in alcune situazioni produrre un errore. Voce di "
+"configurazione: <literal>APT::Get::Fix-Broken</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:295
+#: apt-get.8.xml:292
msgid ""
"Ignore missing packages; if packages cannot be retrieved or fail the "
"integrity check after retrieval (corrupted package files), hold back those "
"configurazione: <literal>APT::Get::Fix-Missing</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:306
+#: apt-get.8.xml:303
msgid ""
"Disables downloading of packages. This is best used with <option>--ignore-"
"missing</option> to force APT to use only the .debs it has already "
"scaricato. Voce di configurazione: <literal>APT::Get::Download</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:313
+#: apt-get.8.xml:310
msgid ""
"Quiet; produces output suitable for logging, omitting progress indicators. "
"More q's will produce more quiet up to a maximum of 2. You can also use "
"qualcosa di inatteso. Voce di configurazione: <literal>quiet</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:328
+#: apt-get.8.xml:325
msgid ""
"No action; perform a simulation of events that would occur but do not "
"actually change the system. Configuration Item: <literal>APT::Get::"
"configurazione: <literal>APT::Get::Simulate</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:332
+#: apt-get.8.xml:329
msgid ""
"Simulated runs performed as a user will automatically deactivate locking "
"(<literal>Debug::NoLocking</literal>), and if the option <literal>APT::Get::"
"bisogno di ulteriori avvertimenti da <literal>apt-get</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:340
+#: apt-get.8.xml:337
msgid ""
"Simulated runs print out a series of lines, each representing a "
"<command>dpkg</command> operation: configure (<literal>Conf</literal>), "
"hanno conseguenze (rari)."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:348
+#: apt-get.8.xml:345
msgid ""
"Automatic yes to prompts; assume \"yes\" as answer to all prompts and run "
"non-interactively. If an undesirable situation, such as changing a held "
"literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:356
+#: apt-get.8.xml:353
msgid ""
"Automatic \"no\" to all prompts. Configuration Item: <literal>APT::Get::"
"Assume-No</literal>."
"<literal>APT::Get::Assume-No</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:361
+#: apt-get.8.xml:358
msgid ""
"Show upgraded packages; print out a list of all packages that are to be "
"upgraded. Configuration Item: <literal>APT::Get::Show-Upgraded</literal>."
"Upgraded</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:367
+#: apt-get.8.xml:364
msgid ""
"Show full versions for upgraded and installed packages. Configuration Item: "
"<literal>APT::Get::Show-Versions</literal>."
"configurazione: <literal>APT::Get::Show-Versions</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:373
+#: apt-get.8.xml:370
+#| msgid ""
+#| "This option controls the architecture packages are built for by "
+#| "<command>apt-get source --compile</command> and how cross-"
+#| "builddependencies are satisfied. By default is it not set which means "
+#| "that the host architecture is the same as the build architecture (which "
+#| "is defined by <literal>APT::Architecture</literal>). Configuration Item: "
+#| "<literal>APT::Get::Host-Architecture</literal>"
msgid ""
"This option controls the architecture packages are built for by <command>apt-"
"get source --compile</command> and how cross-builddependencies are "
"satisfied. By default is it not set which means that the host architecture "
"is the same as the build architecture (which is defined by <literal>APT::"
"Architecture</literal>). Configuration Item: <literal>APT::Get::Host-"
-"Architecture</literal>"
+"Architecture</literal>."
msgstr ""
"Questa opzione controlla l'architettura per la quale <command>apt-get source "
"--compile</command> compila i pacchetti e come le dipendenze di compilazione "
"di configurazione: <literal>APT::Get::Host-Architecture</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:383
+#: apt-get.8.xml:380
+#| msgid ""
+#| "This option controls the architecture packages are built for by "
+#| "<command>apt-get source --compile</command> and how cross-"
+#| "builddependencies are satisfied. By default is it not set which means "
+#| "that the host architecture is the same as the build architecture (which "
+#| "is defined by <literal>APT::Architecture</literal>). Configuration Item: "
+#| "<literal>APT::Get::Host-Architecture</literal>"
+msgid ""
+"This option controls the activated build profiles for which a source package "
+"is built by <command>apt-get source --compile</command> and how build "
+"dependencies are satisfied. By default no build profile is active. More "
+"than one build profile can be activated at a time by concatenating them with "
+"a comma. Configuration Item: <literal>APT::Build-Profiles</literal>."
+msgstr ""
+"Questa opzione controlla i profili di compilazione attivi per i quali "
+"<command>apt-get source --compile</command> compila un pacchetto sorgente e "
+"come le dipendenze di compilazione sono soddisfatte. In modo predefinito non "
+"è attivo alcun profilo di compilazione. Più profili di compilazione possono "
+"essere attivati contemporaneamente concatenandoli con una virgola. Voce di "
+"configurazione: <literal>APT::Build-Profiles</literal>."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-get.8.xml:391
msgid ""
"Compile source packages after downloading them. Configuration Item: "
"<literal>APT::Get::Compile</literal>."
"<literal>APT::Get::Compile</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:388
+#: apt-get.8.xml:396
msgid ""
"Ignore package holds; this causes <command>apt-get</command> to ignore a "
"hold placed on a package. This may be useful in conjunction with "
"non desiderati. Voce di configurazione: <literal>APT::Ignore-Hold</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:395
+#: apt-get.8.xml:403
msgid ""
"Allow installing new packages when used in conjunction with "
"<literal>upgrade</literal>. This is useful if the update of a installed "
"will never remove packages, only allow adding new ones. Configuration Item: "
"<literal>APT::Get::Upgrade-Allow-New</literal>."
msgstr ""
+"Permette l'installazione di nuovi pacchetti quando usato insieme a "
+"<literal>upgrade</literal>. Ciò è utile se l'aggiornamento di un pacchetto "
+"installato richiede l'installazione di nuove dipendenze. Invece di bloccare "
+"il pacchetto <literal>upgrade</literal> aggiornerà il pacchetto e installerà "
+"le nuove dipendenze. Notare che <literal>upgrade</literal> con questa "
+"opzione non rimuoverà mai pacchetti, permetterà solo l'aggiunta di nuovi. "
+"Voce di configurazione: <literal>APT::Get::Upgrade-Allow-New</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:407
+#: apt-get.8.xml:415
msgid ""
"Do not upgrade packages; when used in conjunction with <literal>install</"
"literal>, <literal>no-upgrade</literal> will prevent packages on the command "
"configurazione: <literal>APT::Get::Upgrade</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:414
+#: apt-get.8.xml:422
msgid ""
"Do not install new packages; when used in conjunction with <literal>install</"
"literal>, <literal>only-upgrade</literal> will install upgrades for already "
"Upgrade</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:422
+#: apt-get.8.xml:430
msgid ""
"Force yes; this is a dangerous option that will cause apt to continue "
"without prompting if it is doing something potentially harmful. It should "
"yes</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:430
+#: apt-get.8.xml:438
msgid ""
"Instead of fetching the files to install their URIs are printed. Each URI "
"will have the path, the destination file name, the size and the expected MD5 "
"configurazione: <literal>APT::Get::Print-URIs</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:441
+#: apt-get.8.xml:449
msgid ""
"Use purge instead of remove for anything that would be removed. An asterisk "
"(\"*\") will be displayed next to packages which are scheduled to be purged. "
"option>. Voce di configurazione: <literal>APT::Get::Purge</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:449
+#: apt-get.8.xml:457
msgid ""
"Re-install packages that are already installed and at the newest version. "
"Configuration Item: <literal>APT::Get::ReInstall</literal>."
"configurazione: <literal>APT::Get::ReInstall</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:454
+#: apt-get.8.xml:462
msgid ""
"This option is on by default; use <literal>--no-list-cleanup</literal> to "
"turn it off. When it is on, <command>apt-get</command> will automatically "
"fonti. Voce di configurazione: <literal>APT::Get::List-Cleanup</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:464
+#: apt-get.8.xml:472
msgid ""
"This option controls the default input to the policy engine; it creates a "
"default pin at priority 990 using the specified release string. This "
"pagina di manuale di &apt-preferences;."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:479
+#: apt-get.8.xml:487
msgid ""
"Only perform operations that are 'trivial'. Logically this can be considered "
"related to <option>--assume-yes</option>; where <option>--assume-yes</"
"literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:486
+#: apt-get.8.xml:494
msgid ""
"If any packages are to be removed apt-get immediately aborts without "
"prompting. Configuration Item: <literal>APT::Get::Remove</literal>."
"Get::Remove</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:492
+#: apt-get.8.xml:500
msgid ""
"If the command is either <literal>install</literal> or <literal>remove</"
"literal>, then this option acts like running the <literal>autoremove</"
"literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:499
+#: apt-get.8.xml:507
msgid ""
"Only has meaning for the <literal>source</literal> and <literal>build-dep</"
"literal> commands. Indicates that the given source names are not to be "
"configurazione: <literal>APT::Get::Only-Source</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:510
+#: apt-get.8.xml:518
msgid ""
"Download only the diff, dsc, or tar file of a source archive. Configuration "
"Item: <literal>APT::Get::Diff-Only</literal>, <literal>APT::Get::Dsc-Only</"
"Dsc-Only</literal> e <literal>APT::Get::Tar-Only</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:516
+#: apt-get.8.xml:524
msgid ""
"Only process architecture-dependent build-dependencies. Configuration Item: "
"<literal>APT::Get::Arch-Only</literal>."
"Voce di configurazione: <literal>APT::Get::Arch-Only</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:521
+#: apt-get.8.xml:529
msgid ""
"Ignore if packages can't be authenticated and don't prompt about it. This "
"is useful for tools like pbuilder. Configuration Item: <literal>APT::Get::"
"configurazione: <literal>APT::Get::AllowUnauthenticated</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-get.8.xml:527
+#: apt-get.8.xml:535
msgid ""
"Show user friendly progress information in the terminal window when packages "
"are installed, upgraded or removed. For a machine parsable version of this "
"Item: <literal>DpkgPM::Progress</literal> and <literal>Dpkg::Progress-Fancy</"
"literal>."
msgstr ""
+"Mostra informazioni sul progresso facili da leggere nella finestra del "
+"terminale quando i pacchetti sono installati, aggiornati o rimossi. Per una "
+"versione analizzabile da macchina di questi dati, vedere README.progress-"
+"reporting nella directory della documentazione di apt. Voce di "
+"configurazione: <literal>DpkgPM::Progress</literal> e <literal>Dpkg"
+"::Progress-Fancy</literal>."
#. type: Content of: <refentry><refsect1><title>
-#: apt-get.8.xml:540 apt-cache.8.xml:345 apt-key.8.xml:176 apt-mark.8.xml:127
-#: apt.conf.5.xml:1200 apt_preferences.5.xml:700
+#: apt-get.8.xml:548 apt-cache.8.xml:345 apt-key.8.xml:176 apt-mark.8.xml:127
+#: apt.conf.5.xml:1209 apt_preferences.5.xml:700
msgid "Files"
msgstr "File"
#. type: Content of: <refentry><refsect1><title>
-#: apt-get.8.xml:550 apt-cache.8.xml:352 apt-key.8.xml:197 apt-mark.8.xml:133
+#: apt-get.8.xml:558 apt-cache.8.xml:352 apt-key.8.xml:197 apt-mark.8.xml:133
#: apt-secure.8.xml:193 apt-cdrom.8.xml:154 apt-config.8.xml:111
-#: apt.conf.5.xml:1206 apt_preferences.5.xml:707 sources.list.5.xml:258
+#: apt.conf.5.xml:1215 apt_preferences.5.xml:707 sources.list.5.xml:280
#: apt-extracttemplates.1.xml:72 apt-sortpkgs.1.xml:65
#: apt-ftparchive.1.xml:609
msgid "See Also"
msgstr "Vedere anche"
#. type: Content of: <refentry><refsect1><para>
-#: apt-get.8.xml:551
+#: apt-get.8.xml:559
+#| msgid ""
+#| "&apt-cache;, &apt-cdrom;, &dpkg;, &dselect;, &sources-list;, &apt-conf;, "
+#| "&apt-config;, &apt-secure;, The APT User's guide in &guidesdir;, &apt-"
+#| "preferences;, the APT Howto."
msgid ""
-"&apt-cache;, &apt-cdrom;, &dpkg;, &dselect;, &sources-list;, &apt-conf;, "
-"&apt-config;, &apt-secure;, The APT User's guide in &guidesdir;, &apt-"
-"preferences;, the APT Howto."
+"&apt-cache;, &apt-cdrom;, &dpkg;, &sources-list;, &apt-conf;, &apt-config;, "
+"&apt-secure;, The APT User's guide in &guidesdir;, &apt-preferences;, the "
+"APT Howto."
msgstr ""
-"&apt-cache;, &apt-cdrom;, &dpkg;, &dselect;, &sources-list;, &apt-conf;, "
-"&apt-config;, &apt-secure;, la Guida dell'utente di APT in &guidesdir;, &apt-"
-"preferences;, l'APT Howto."
+"&apt-cache;, &apt-cdrom;, &dpkg;, &sources-list;, &apt-conf;, &apt-config;, "
+"&apt-secure;, la guida dell'utente di APT in &guidesdir;, &apt-preferences;, "
+"l'APT Howto."
#. type: Content of: <refentry><refsect1><title>
-#: apt-get.8.xml:556 apt-cache.8.xml:357 apt-mark.8.xml:137
+#: apt-get.8.xml:564 apt-cache.8.xml:357 apt-mark.8.xml:137
#: apt-cdrom.8.xml:159 apt-config.8.xml:116 apt-extracttemplates.1.xml:76
#: apt-sortpkgs.1.xml:69 apt-ftparchive.1.xml:613
msgid "Diagnostics"
msgstr "Diagnostica"
#. type: Content of: <refentry><refsect1><para>
-#: apt-get.8.xml:557
+#: apt-get.8.xml:565
msgid ""
"<command>apt-get</command> returns zero on normal operation, decimal 100 on "
"error."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-cdrom.8.xml:87
-#, fuzzy
#| msgid ""
#| "Mount point; specify the location to mount the CD-ROM. This mount point "
#| "must be listed in <filename>/etc/fstab</filename> and properly "
"<option>--cdrom</option> option. Configuration Item: <literal>Acquire::"
"cdrom::AutoDetect</literal>."
msgstr ""
-"Punto di mount; specifica la posizione in cui montare il CD-ROM. Questo "
-"punto di mount deve essere elencato nel file <filename>/etc/fstab</filename> "
-"e configurato correttamente. Voce di configurazione: <literal>Acquire::"
-"cdrom::mount</literal>."
+"Non cercare di rilevare automaticamente il percorso del CD-ROM. Solitamente "
+"usato insieme all'opzione <option>--cdrom</option>. Voce di configurazione: "
+"<literal>Acquire::cdrom::AutoDetect</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
#: apt-cdrom.8.xml:95
"quando sono registrate con <command>dpkg --add-architecture</command>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:181
+#: apt.conf.5.xml:182
+msgid ""
+"List of all build profiles enabled for build-dependency resolution, without "
+"the \"<literal>profile.</literal>\" namespace prefix. By default this list "
+"is empty. The <envar>DEB_BUILD_PROFILES</envar> as used by &dpkg-"
+"buildpackage; overrides the list notation."
+msgstr ""
+"Elenco dei profili di compilazione abilitati per la risoluzione delle "
+"dipendenze di compilazione, senza il prefisso dello spazio dei nomi "
+"«<literal>profile.</literal>». In modo predefinito questa lista è vuota. "
+"<envar>DEB_BUILD_PROFILES</envar>, come usata da &dpkg-buildpackage; ha la "
+"precedenza sulla notazione della lista."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt.conf.5.xml:190
msgid ""
"Default release to install packages from if more than one version is "
"available. Contains release name, codename or release version. Examples: "
"preferences;."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:187
+#: apt.conf.5.xml:196
msgid ""
"Ignore held packages; this global option causes the problem resolver to "
"ignore held packages in its decision making."
"di problemi ignori i pacchetti bloccati nel suo processo decisionale."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:192
+#: apt.conf.5.xml:201
msgid ""
"Defaults to on. When turned on the autoclean feature will remove any "
"packages which can no longer be downloaded from the cache. If turned off "
"reinstallarli."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:200
+#: apt.conf.5.xml:209
msgid ""
"Defaults to on, which will cause APT to install essential and important "
"packages as soon as possible in an install/upgrade operation, in order to "
"che dipende da A, dato che la dipendenza da A non è più soddisfatta."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:212
+#: apt.conf.5.xml:221
msgid ""
"The immediate configuration marker is also applied in the potentially "
"problematic case of circular dependencies, since a dependency with the "
"l'unico problema che può aiutare a prevenire."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:225
+#: apt.conf.5.xml:234
msgid ""
"Before a big operation like <literal>dist-upgrade</literal> is run with this "
"option disabled you should try to explicitly <literal>install</literal> the "
"il processo di aggiornamento."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:236
+#: apt.conf.5.xml:245
msgid ""
"Never enable this option unless you <emphasis>really</emphasis> know what "
"you are doing. It permits APT to temporarily remove an essential package to "
"<command>dash</command> o qualsiasi altro da cui dipendono tali pacchetti."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:248
+#: apt.conf.5.xml:257
msgid ""
"APT uses since version 0.7.26 a resizable memory mapped cache file to store "
"the available information. <literal>Cache-Start</literal> acts as a hint of "
"della cache è disabilitata."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:264
+#: apt.conf.5.xml:273
msgid "Defines which packages are considered essential build dependencies."
msgstr ""
"Definisce quali pacchetti sono considerati dipendenze di compilazione "
"essenziali."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:268
+#: apt.conf.5.xml:277
msgid ""
"The Get subsection controls the &apt-get; tool; please see its documentation "
"for more information about the options here."
"documentazione per maggiori informazioni su queste opzioni."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:273
+#: apt.conf.5.xml:282
msgid ""
"The Cache subsection controls the &apt-cache; tool; please see its "
"documentation for more information about the options here."
"documentazione per maggiori informazioni su queste opzioni."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:278
+#: apt.conf.5.xml:287
msgid ""
"The CDROM subsection controls the &apt-cdrom; tool; please see its "
"documentation for more information about the options here."
"documentazione per maggiori informazioni su queste opzioni."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:284
+#: apt.conf.5.xml:293
msgid "The Acquire Group"
msgstr "Il gruppo Acquire"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:285
+#: apt.conf.5.xml:294
msgid ""
"The <literal>Acquire</literal> group of options controls the download of "
"packages as well as the various \"acquire methods\" responsible for the "
"scaricamento stesso (vedere anche &sources-list;)."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:292
+#: apt.conf.5.xml:301
msgid ""
"Security related option defaulting to true, as giving a Release file's "
"validation an expiration date prevents replay attacks over a long timescale, "
"ValidTime</literal> seguente."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:305
+#: apt.conf.5.xml:314
msgid ""
"Maximum time (in seconds) after its creation (as indicated by the "
"<literal>Date</literal> header) that the <filename>Release</filename> file "
"dell'archivio in fondo al nome dell'opzione."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:317
+#: apt.conf.5.xml:326
msgid ""
"Minimum time (in seconds) after its creation (as indicated by the "
"<literal>Date</literal> header) that the <filename>Release</filename> file "
"archivio aggiungendo l'etichetta dell'archivio in fondo al nome dell'opzione."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:329
+#: apt.conf.5.xml:338
msgid ""
"Try to download deltas called <literal>PDiffs</literal> for indexes (like "
"<filename>Packages</filename> files) instead of downloading whole ones. True "
"interamente i nuovi. Attiva in modo predefinito."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:332
+#: apt.conf.5.xml:341
msgid ""
"Two sub-options to limit the use of PDiffs are also available: "
"<literal>FileLimit</literal> can be used to specify a maximum number of "
"completo invece delle patch."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:342
+#: apt.conf.5.xml:351
msgid ""
"Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</"
"literal> or <literal>access</literal> which determines how APT parallelizes "
"literal> significa che viene aperta una connessione per ogni tipo di URI."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:350
+#: apt.conf.5.xml:359
msgid ""
"Number of retries to perform. If this is non-zero APT will retry failed "
"files the given number of times."
"ha avuto successo."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:355
+#: apt.conf.5.xml:364
msgid ""
"Use symlinks for source archives. If set to true then source archives will "
"be symlinked when possible instead of copying. True is the default."
"vero."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:360
+#: apt.conf.5.xml:369
msgid ""
"<literal>http::Proxy</literal> sets the default proxy to use for HTTP URIs. "
"It is in the standard form of <literal>http://[[user][:pass]@]host[:port]/</"
"la variabile d'ambiente <envar>http_proxy</envar>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:368
+#: apt.conf.5.xml:377
msgid ""
"Three settings are provided for cache control with HTTP/1.1 compliant proxy "
"caches. <literal>No-Cache</literal> tells the proxy not to use its cached "
"file .deb."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:378 apt.conf.5.xml:466
+#: apt.conf.5.xml:387 apt.conf.5.xml:475
msgid ""
"The option <literal>timeout</literal> sets the timeout timer used by the "
"method; this value applies to the connection as well as the data timeout."
"quello per i dati."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:381
+#: apt.conf.5.xml:390
msgid ""
"The setting <literal>Acquire::http::Pipeline-Depth</literal> can be used to "
"enable HTTP pipelining (RFC 2616 section 8.1.2.2) which can be beneficial e."
"con la specifica HTTP/1.1."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:388
+#: apt.conf.5.xml:397
msgid ""
"<literal>Acquire::http::AllowRedirect</literal> controls whether APT will "
"follow redirects, which is enabled by default."
"meno le ridirezioni che sono abilitate in modo predefinito."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:391
-#, fuzzy
+#: apt.conf.5.xml:400
#| msgid ""
#| "The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</"
#| "literal> which accepts integer values in kilobytes. The default value is "
"bandwidth. Note that this option implicitly disables downloading from "
"multiple servers at the same time."
msgstr ""
-"La quantità di banda utilizzata può essere limitata con <literal>Acquire::"
-"http::Dl-Limit</literal> che accetta valori interi in kilobyte. Il valore "
-"predefinito è 0 che disattiva il limite e cerca di usare tutta la banda "
-"disponibile (notare che questa opzione implicitamente disabilita lo "
-"scaricamento da più server contemporaneamente)."
+"La quantità di banda utilizzata può essere limitata con "
+"<literal>Acquire::http::Dl-Limit</literal> che accetta valori interi in "
+"kilobyte al secondo. Il valore predefinito è 0 che disattiva il limite e "
+"cerca di usare tutta la banda disponibile. Notare che questa opzione "
+"implicitamente disabilita lo scaricamento da più server contemporaneamente."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:398
+#: apt.conf.5.xml:407
msgid ""
"<literal>Acquire::http::User-Agent</literal> can be used to set a different "
"User-Agent for the http download method as some proxies allow access for "
"conosciuto."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:402
+#: apt.conf.5.xml:411
msgid ""
"<literal>Acquire::http::Proxy-Auto-Detect</literal> can be used to specify "
"an external command to discover the http proxy to use. Apt expects the "
"takes precedence over the legacy option name <literal>ProxyAutoDetect</"
"literal>."
msgstr ""
+"<literal>Acquire::http::Proxy-Auto-Detect</literal> può essere usato per "
+"specificare un comando esterno per rilevare il proxy http da usare. Apt si "
+"aspetta che il comando produca in output il proxy sullo stdout nello stile "
+"<literal>http://proxy:porta/</literal>. Questo avrà la precedenza sul "
+"generico <literal>Acquire::http::Proxy</literal>, ma non su qualsiasi "
+"configurazione specifica di host proxy impostata con "
+"<literal>Acquire::http::Proxy::$HOST</literal>. Vedere il pacchetto &squid-"
+"deb-proxy-client; per un esempio di implementazione che usa avahi. Questa "
+"opzione ha la precedenza sull'opzione col nome obsoleto "
+"<literal>ProxyAutoDetect</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:420
+#: apt.conf.5.xml:429
msgid ""
"The <literal>Cache-control</literal>, <literal>Timeout</literal>, "
"<literal>AllowRedirect</literal>, <literal>Dl-Limit</literal> and "
"<literal>Pipeline-Depth</literal> non è ancora supportata."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:428
+#: apt.conf.5.xml:437
msgid ""
"<literal>CaInfo</literal> suboption specifies place of file that holds info "
"about trusted certificates. <literal><host>::CaInfo</literal> is the "
"literal> è la corrispondente opzione specifica per ciascun host."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:449
+#: apt.conf.5.xml:458
msgid ""
"<literal>ftp::Proxy</literal> sets the default proxy to use for FTP URIs. "
"It is in the standard form of <literal>ftp://[[user][:pass]@]host[:port]/</"
"literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:469
+#: apt.conf.5.xml:478
msgid ""
"Several settings are provided to control passive mode. Generally it is safe "
"to leave passive mode on; it works in nearly every environment. However, "
"uno specifico host (vedere il file di configurazione d'esempio)."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:476
+#: apt.conf.5.xml:485
msgid ""
"It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</"
"envar> environment variable to an HTTP URL - see the discussion of the http "
"a causa della sua bassa efficienza."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:481
+#: apt.conf.5.xml:490
msgid ""
"The setting <literal>ForceExtended</literal> controls the use of RFC2428 "
"<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is "
"parte dei server FTP non supporta la RFC 2428."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:495
+#: apt.conf.5.xml:504
#, no-wrap
msgid "/cdrom/::Mount \"foo\";"
msgstr "/cdrom/::Mount \"pippo\";"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:490
+#: apt.conf.5.xml:499
msgid ""
"For URIs using the <literal>cdrom</literal> method, the only configurable "
"option is the mount point, <literal>cdrom::Mount</literal>, which must be "
"comandi per lo smontaggio possono essere specificati usando UMount."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:503
+#: apt.conf.5.xml:512
msgid ""
"For GPGV URIs the only configurable option is <literal>gpgv::Options</"
"literal>, which passes additional parameters to gpgv."
"literal>, che passa parametri aggiuntivi a gpgv."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:514
+#: apt.conf.5.xml:523
#, no-wrap
msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";"
msgstr "Acquire::CompressionTypes::<replaceable>EstensioneFile</replaceable> \"<replaceable>NomeMetodo</replaceable>\";"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:509
+#: apt.conf.5.xml:518
msgid ""
"List of compression types which are understood by the acquire methods. "
"Files like <filename>Packages</filename> can be available in various "
"metodo usato. La sintassi è: <placeholder type=\"synopsis\" id=\"0\"/>"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:519
+#: apt.conf.5.xml:528
#, no-wrap
msgid "Acquire::CompressionTypes::Order:: \"gz\";"
msgstr "Acquire::CompressionTypes::Order:: \"gz\";"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:522
+#: apt.conf.5.xml:531
#, no-wrap
msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
msgstr "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:515
+#: apt.conf.5.xml:524
msgid ""
"Also, the <literal>Order</literal> subgroup can be used to define in which "
"order the acquire system will try to download the compressed files. The "
"all'elenco, dato che verrà aggiunto automaticamente."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:529
+#: apt.conf.5.xml:538
#, no-wrap
msgid "Dir::Bin::bzip2 \"/bin/bzip2\";"
msgstr "Dir::Bin::bzip2 \"/bin/bzip2\";"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:524
+#: apt.conf.5.xml:533
msgid ""
"Note that the <literal>Dir::Bin::<replaceable>Methodname</replaceable></"
"literal> will be checked at run time. If this option has been set, the "
"definito; aggiunge solamente il tipo indicato all'inizio dell'elenco."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:534
+#: apt.conf.5.xml:543
msgid ""
"The special type <literal>uncompressed</literal> can be used to give "
"uncompressed files a preference, but note that most archives don't provide "
"soprattutto per i mirror locali."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:541
+#: apt.conf.5.xml:550
msgid ""
"When downloading <literal>gzip</literal> compressed indexes (Packages, "
"Sources, or Translations), keep them gzip compressed locally instead of "
"modo predefinito è disabilitato."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:549
+#: apt.conf.5.xml:558
msgid ""
"The Languages subsection controls which <filename>Translation</filename> "
"files are downloaded and in which order APT tries to display the description-"
"codici di lingua lunghi sono particolarmente rari."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para><programlisting>
-#: apt.conf.5.xml:566
+#: apt.conf.5.xml:575
#, no-wrap
msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };"
msgstr "Acquire::Languages { \"environment\"; \"it\"; \"en\"; \"none\"; \"fr\"; };"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:554
+#: apt.conf.5.xml:563
msgid ""
"The default list includes \"environment\" and \"en\". "
"\"<literal>environment</literal>\" has a special meaning here: it will be "
"<placeholder type=\"programlisting\" id=\"0\"/>"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:567
+#: apt.conf.5.xml:576
msgid ""
"Note: To prevent problems resulting from APT being executed in different "
"environments (e.g. by different users or by other programs) all Translation "
"implicito)."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:576
+#: apt.conf.5.xml:585
msgid "When downloading, force to use only the IPv4 protocol."
-msgstr ""
+msgstr "Durante gli scaricamenti, forza l'uso del solo protocollo IPv4."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:582
+#: apt.conf.5.xml:591
msgid "When downloading, force to use only the IPv6 protocol."
-msgstr ""
+msgstr "Durante gli scaricamenti, forza l'uso del solo protocollo IPv6."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:589
+#: apt.conf.5.xml:598
msgid "Directories"
msgstr "Directory"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:591
+#: apt.conf.5.xml:600
msgid ""
"The <literal>Dir::State</literal> section has directories that pertain to "
"local state information. <literal>lists</literal> is the directory to place "
"<filename>/</filename> o <filename>./</filename>."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:598
+#: apt.conf.5.xml:607
msgid ""
"<literal>Dir::Cache</literal> contains locations pertaining to local cache "
"information, such as the two package caches <literal>srcpkgcache</literal> "
"la directory predefinita è contenuta in <literal>Dir::Cache</literal>"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:607
+#: apt.conf.5.xml:616
msgid ""
"<literal>Dir::Etc</literal> contains the location of configuration files, "
"<literal>sourcelist</literal> gives the location of the sourcelist and "
"configurazione specificato da <envar>APT_CONFIG</envar>)."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:613
+#: apt.conf.5.xml:622
msgid ""
"The <literal>Dir::Parts</literal> setting reads in all the config fragments "
"in lexical order from the directory specified. After this is done then the "
"termine viene caricato il file di configurazione principale."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:617
+#: apt.conf.5.xml:626
msgid ""
"Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::"
"Bin::Methods</literal> specifies the location of the method handlers and "
"specificano la posizione dei rispettivi programmi."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:625
+#: apt.conf.5.xml:634
msgid ""
"The configuration item <literal>RootDir</literal> has a special meaning. If "
"set, all paths in <literal>Dir::</literal> will be relative to "
"staging/var/lib/dpkg/status</filename>."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:638
+#: apt.conf.5.xml:647
msgid ""
"The <literal>Ignore-Files-Silently</literal> list can be used to specify "
"which files APT should silently ignore while parsing the files in the "
"questi modelli possono usare una sintassi con espressioni regolari."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:647
+#: apt.conf.5.xml:656
msgid "APT in DSelect"
msgstr "APT in DSelect"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:649
+#: apt.conf.5.xml:658
msgid ""
"When APT is used as a &dselect; method several configuration directives "
"control the default behavior. These are in the <literal>DSelect</literal> "
"sezione <literal>DSelect</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:654
+#: apt.conf.5.xml:663
msgid ""
"Cache Clean mode; this value may be one of <literal>always</literal>, "
"<literal>prompt</literal>, <literal>auto</literal>, <literal>pre-auto</"
"scaricare i nuovi pacchetti."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:668
+#: apt.conf.5.xml:677
msgid ""
"The contents of this variable are passed to &apt-get; as command line "
"options when it is run for the install phase."
"installazione."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:673
+#: apt.conf.5.xml:682
msgid ""
"The contents of this variable are passed to &apt-get; as command line "
"options when it is run for the update phase."
"aggiornamento."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:678
+#: apt.conf.5.xml:687
msgid ""
"If true the [U]pdate operation in &dselect; will always prompt to continue. "
"The default is to prompt only on error."
"solo in caso di errore."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:684
+#: apt.conf.5.xml:693
msgid "How APT calls &dpkg;"
msgstr "Come APT invoca &dpkg;"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:685
+#: apt.conf.5.xml:694
msgid ""
"Several configuration directives control how APT invokes &dpkg;. These are "
"in the <literal>DPkg</literal> section."
"&dpkg;; sono nella sezione <literal>DPkg</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:690
+#: apt.conf.5.xml:699
msgid ""
"This is a list of options to pass to &dpkg;. The options must be specified "
"using the list notation and each list item is passed as a single argument to "
"passata a &dpkg; come un singolo argomento."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:696
+#: apt.conf.5.xml:705
msgid ""
"This is a list of shell commands to run before/after invoking &dpkg;. Like "
"<literal>options</literal> this must be specified in list notation. The "
"bin/sh</filename>; se qualcuno dei comandi fallisce APT terminerà annullando."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:703
-#, fuzzy
+#: apt.conf.5.xml:712
#| msgid ""
#| "This is a list of shell commands to run before invoking &dpkg;. Like "
#| "<literal>options</literal> this must be specified in list notation. The "
msgstr ""
"Questa è una lista di comandi di shell da eseguire prima di invocare &dpkg;. "
"Come <literal>options</literal> deve essere specificata con la notazione per "
-"le liste. I comandi sono invocati in ordine usando <filename>/bin/sh</"
-"filename>; se qualcuno dei comandi fallisce APT terminerà annullando. APT "
-"passa i nomi di file di tutti i file .deb che sta per installare ai comandi, "
-"uno per riga, sullo standard input."
+"le liste. I comandi sono invocati in ordine usando "
+"<filename>/bin/sh</filename>; se qualcuno dei comandi fallisce APT terminerà "
+"annullando. APT passa i nomi di file di tutti i file .deb che sta per "
+"installare ai comandi, uno per riga sul descrittore di file richiesto, "
+"usando in modo predefinito lo standard input."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:710
-#, fuzzy
+#: apt.conf.5.xml:719
#| msgid ""
#| "Version 2 of this protocol dumps more information, including the protocol "
#| "version, the APT configuration space and the packages, files and versions "
msgstr ""
"La versione 2 di questo protocollo fa il dump di più informazioni, inclusi "
"la versione del protocollo, lo spazio di configurazione di APT, e i "
-"pacchetti, file e versioni che vengono modificati. La versione 2 viene "
-"abilitata impostando <literal>DPkg::Tools::options::cmd::Version</literal> a "
-"2. <literal>cmd</literal> è un comando passato a <literal>Pre-Install-Pkgs</"
-"literal>."
+"pacchetti, file e versioni che vengono modificati. La versione 3 aggiunge "
+"l'architettura e il contrassegno <literal>MultiArch</literal> per ciascuna "
+"versione di cui viene fatto il dump."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:715
+#: apt.conf.5.xml:724
msgid ""
"The version of the protocol to be used for the command "
"<literal><replaceable>cmd</replaceable></literal> can be chosen by setting "
"the requested version it will send the information in the highest version it "
"has support for instead."
msgstr ""
+"La versione del protocollo da usare per il comando "
+"<literal><replaceable>cmd</replaceable></literal> può essere scelta "
+"impostando in modo appropriato <literal>DPkg::Tools::options::<replaceable>cm"
+"d</replaceable>::Version</literal>, il cui valore predefinito è la versione "
+"1. Se APT non supporta la versione richiesta invierà invece l'informazione "
+"nella versione più alta per cui ha il supporto."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:722
+#: apt.conf.5.xml:731
msgid ""
"The file descriptor to be used to send the information can be requested with "
"<literal>DPkg::Tools::options::<replaceable>cmd</replaceable>::InfoFD</"
"looking for the environment variable <envar>APT_HOOK_INFO_FD</envar> which "
"contains the number of the used file descriptor as a confirmation."
msgstr ""
+"Il descrittore di file da usare per inviare le informazioni può essere "
+"richiesto con <literal>DPkg::Tools::options::<replaceable>cmd</replaceable>::"
+"InfoFD</literal> che è in modo predefinito <literal>0</literal> per lo "
+"standard input ed è disponibile a partire dalla versione 0.9.11. Il supporto "
+"per l'opzione può essere controllato guardando la variabile d'ambiente "
+"<envar>APT_HOOK_INFO_FD</envar> che contiene il numero del descrittore di "
+"file usato per conferma."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:732
+#: apt.conf.5.xml:741
msgid ""
"APT chdirs to this directory before invoking &dpkg;, the default is "
"<filename>/</filename>."
"valore predefinito è <filename>/</filename>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:737
+#: apt.conf.5.xml:746
msgid ""
"These options are passed to &dpkg-buildpackage; when compiling packages; the "
"default is to disable signing and produce all binaries."
"binari."
#. type: Content of: <refentry><refsect1><refsect2><title>
-#: apt.conf.5.xml:742
+#: apt.conf.5.xml:751
msgid "dpkg trigger usage (and related options)"
msgstr "Uso dei trigger di dpkg (e relative opzioni)"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:743
+#: apt.conf.5.xml:752
msgid ""
"APT can call &dpkg; in such a way as to let it make aggressive use of "
"triggers over multiple calls of &dpkg;. Without further options &dpkg; will "
"pacchetti."
#. type: Content of: <refentry><refsect1><refsect2><para><literallayout>
-#: apt.conf.5.xml:758
+#: apt.conf.5.xml:767
#, no-wrap
msgid ""
"DPkg::NoTriggers \"true\";\n"
"DPkg::TriggersPending \"true\";"
#. type: Content of: <refentry><refsect1><refsect2><para>
-#: apt.conf.5.xml:752
+#: apt.conf.5.xml:761
msgid ""
"Note that it is not guaranteed that APT will support these options or that "
"these options will not cause (big) trouble in the future. If you have "
"\"literallayout\" id=\"0\"/>"
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:765
+#: apt.conf.5.xml:774
msgid ""
"Add the no triggers flag to all &dpkg; calls (except the ConfigurePending "
"call). See &dpkg; if you are interested in what this actually means. In "
"questa opzione anche alle chiamate per lo spacchettamento e la rimozione."
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:773
+#: apt.conf.5.xml:782
msgid ""
"Valid values are \"<literal>all</literal>\", \"<literal>smart</literal>\" "
"and \"<literal>no</literal>\". The default value is \"<literal>all</literal>"
"potrebbe finire in uno stato non configurato e potenzialmente non avviabile."
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:788
+#: apt.conf.5.xml:797
msgid ""
"If this option is set APT will call <command>dpkg --configure --pending</"
"command> to let &dpkg; handle all required configurations and triggers. This "
"si può disattivare questa opzione in tutte le esecuzioni tranne l'ultima."
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:795
+#: apt.conf.5.xml:804
msgid ""
"Useful for the <literal>smart</literal> configuration as a package which has "
"pending triggers is not considered as <literal>installed</literal>, and "
"necessari per configurare il pacchetto in questione."
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:808
+#: apt.conf.5.xml:817
#, no-wrap
msgid ""
"OrderList::Score {\n"
"};"
#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:801
+#: apt.conf.5.xml:810
msgid ""
"Essential packages (and their dependencies) should be configured immediately "
"after unpacking. It is a good idea to do this quite early in the upgrade "
"con i loro valori predefiniti. <placeholder type=\"literallayout\" id=\"0\"/>"
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:821
+#: apt.conf.5.xml:830
msgid "Periodic and Archives options"
msgstr "Opzioni Periodic e Archives"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:822
+#: apt.conf.5.xml:831
msgid ""
"<literal>APT::Periodic</literal> and <literal>APT::Archives</literal> groups "
"of options configure behavior of apt periodic updates, which is done by the "
"all'inizio dello script."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:830
+#: apt.conf.5.xml:839
msgid "Debug options"
msgstr "Opzioni di debug"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:832
+#: apt.conf.5.xml:841
msgid ""
"Enabling options in the <literal>Debug::</literal> section will cause "
"debugging information to be sent to the standard error stream of the program "
"esserlo:"
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:843
+#: apt.conf.5.xml:852
msgid ""
"<literal>Debug::pkgProblemResolver</literal> enables output about the "
"decisions made by <literal>dist-upgrade, upgrade, install, remove, purge</"
"literal>."
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:851
+#: apt.conf.5.xml:860
msgid ""
"<literal>Debug::NoLocking</literal> disables all file locking. This can be "
"used to run some operations (for instance, <literal>apt-get -s install</"
"install</literal>) come utente non root."
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:860
+#: apt.conf.5.xml:869
msgid ""
"<literal>Debug::pkgDPkgPM</literal> prints out the actual command line each "
"time that <literal>apt</literal> invokes &dpkg;."
#. motivating example, except I haven't a clue why you'd want
#. to do this.
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: apt.conf.5.xml:868
+#: apt.conf.5.xml:877
msgid ""
"<literal>Debug::IdentCdrom</literal> disables the inclusion of statfs data "
"in CD-ROM IDs."
"negli ID dei CD-ROM."
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:878
+#: apt.conf.5.xml:887
msgid "A full list of debugging options to apt follows."
msgstr "Segue un elenco completo delle opzioni di debug per apt."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:887
+#: apt.conf.5.xml:896
msgid ""
"Print information related to accessing <literal>cdrom://</literal> sources."
msgstr ""
"Stampa informazioni relative all'accesso a fonti <literal>cdrom://</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:898
+#: apt.conf.5.xml:907
msgid "Print information related to downloading packages using FTP."
msgstr ""
"Stampa informazioni relative allo scaricamento dei pacchetti usando FTP."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:909
+#: apt.conf.5.xml:918
msgid "Print information related to downloading packages using HTTP."
msgstr ""
"Stampa informazioni relative allo scaricamento dei pacchetti usando HTTP."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:920
+#: apt.conf.5.xml:929
msgid "Print information related to downloading packages using HTTPS."
msgstr ""
"Stampa informazioni relative allo scaricamento dei pacchetti usando HTTPS."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:931
+#: apt.conf.5.xml:940
msgid ""
"Print information related to verifying cryptographic signatures using "
"<literal>gpg</literal>."
"usando <literal>gpg</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:942
+#: apt.conf.5.xml:951
msgid ""
"Output information about the process of accessing collections of packages "
"stored on CD-ROMs."
"pacchetti memorizzati su CD-ROM."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:952
+#: apt.conf.5.xml:961
msgid "Describes the process of resolving build-dependencies in &apt-get;."
msgstr ""
"Descrive il processo di risoluzione delle dipendenze di compilazione in &apt-"
"get;."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:962
+#: apt.conf.5.xml:971
msgid ""
"Output each cryptographic hash that is generated by the <literal>apt</"
"literal> libraries."
"<literal>apt</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:972
+#: apt.conf.5.xml:981
msgid ""
"Do not include information from <literal>statfs</literal>, namely the number "
"of used and free blocks on the CD-ROM filesystem, when generating an ID for "
"system del CD-ROM."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:983
+#: apt.conf.5.xml:992
msgid ""
"Disable all file locking. For instance, this will allow two instances of "
"<quote><literal>apt-get update</literal></quote> to run at the same time."
"contemporaneamente."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:995
+#: apt.conf.5.xml:1004
msgid "Log when items are added to or removed from the global download queue."
msgstr ""
"Registra nel log quando vengono aggiunte o rimosse voci dalla coda globale "
"degli scaricamenti."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1005
+#: apt.conf.5.xml:1014
msgid ""
"Output status messages and errors related to verifying checksums and "
"cryptographic signatures of downloaded files."
"codici di controllo e delle firme di cifratura dei file scaricati."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1015
+#: apt.conf.5.xml:1024
msgid ""
"Output information about downloading and applying package index list diffs, "
"and errors relating to package index list diffs."
"diff."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1027
+#: apt.conf.5.xml:1036
msgid ""
"Output information related to patching apt package lists when downloading "
"index diffs instead of full indices."
"invece degli indici completi."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1038
+#: apt.conf.5.xml:1047
msgid ""
"Log all interactions with the sub-processes that actually perform downloads."
msgstr ""
"realmente gli scaricamenti."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1049
+#: apt.conf.5.xml:1058
msgid ""
"Log events related to the automatically-installed status of packages and to "
"the removal of unused packages."
"installato dei pacchetti e alla rimozione dei pacchetti non utilizzati."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1059
+#: apt.conf.5.xml:1068
msgid ""
"Generate debug messages describing which packages are being automatically "
"installed to resolve dependencies. This corresponds to the initial auto-"
"pkgProblemResolver</literal>."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1073
+#: apt.conf.5.xml:1082
msgid ""
"Generate debug messages describing which packages are marked as keep/install/"
"remove while the ProblemResolver does his work. Each addition or deletion "
"sezione in cui compare il pacchetto."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1094
+#: apt.conf.5.xml:1103
msgid ""
"When invoking &dpkg;, output the precise command line with which it is being "
"invoked, with arguments separated by a single space character."
"gli argomenti separati da un singolo carattere di spazio."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1105
+#: apt.conf.5.xml:1114
msgid ""
"Output all the data received from &dpkg; on the status file descriptor and "
"any errors encountered while parsing it."
"di stato ed ogni errore incontrato durante la sua analisi."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1116
+#: apt.conf.5.xml:1125
msgid ""
"Generate a trace of the algorithm that decides the order in which "
"<literal>apt</literal> should pass packages to &dpkg;."
"literal> deve passare i pacchetti a &dpkg;."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1128
+#: apt.conf.5.xml:1137
msgid ""
"Output status messages tracing the steps performed when invoking &dpkg;."
msgstr ""
"nell'invocazione di &dpkg;."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1139
+#: apt.conf.5.xml:1148
msgid "Output the priority of each package list on startup."
msgstr "Produce in output la priorità di ogni elenco di pacchetti all'avvio."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1149
+#: apt.conf.5.xml:1158
msgid ""
"Trace the execution of the dependency resolver (this applies only to what "
"happens when a complex dependency problem is encountered)."
"dipendenze)."
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1160
+#: apt.conf.5.xml:1169
msgid ""
"Display a list of all installed packages with their calculated score used by "
"the pkgProblemResolver. The description of the package is the same as "
"la stessa descritta in <literal>Debug::pkgDepCache::Marker</literal>"
#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:1172
+#: apt.conf.5.xml:1181
msgid ""
"Print information about the vendors read from <filename>/etc/apt/vendors."
"list</filename>."
"filename>."
#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:1194 apt_preferences.5.xml:547 sources.list.5.xml:217
+#: apt.conf.5.xml:1203 apt_preferences.5.xml:547 sources.list.5.xml:239
#: apt-ftparchive.1.xml:598
msgid "Examples"
msgstr "Esempi"
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1195
+#: apt.conf.5.xml:1204
msgid ""
"&configureindex; is a configuration file showing example values for all "
"possible options."
#. ? reading apt.conf
#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:1207
+#: apt.conf.5.xml:1216
msgid "&apt-cache;, &apt-config;, &apt-preferences;."
msgstr "&apt-cache;, &apt-config;, &apt-preferences;."
"riga <literal>deb-src</literal>."
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:80
+#: sources.list.5.xml:79
msgid ""
"The format for a <filename>sources.list</filename> entry using the "
"<literal>deb</literal> and <literal>deb-src</literal> types is:"
"<literal>deb</literal> o <literal>deb-src</literal> è:"
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:83
+#: sources.list.5.xml:82
+#, no-wrap
+#| msgid "deb [ options ] uri distribution [component1] [component2] [...]"
+msgid "deb [ options ] uri suite [component1] [component2] [...]"
+msgstr "deb [ opzioni ] uri suite [componente1] [componente2] [...]"
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml:86
#, no-wrap
-msgid "deb [ options ] uri distribution [component1] [component2] [...]"
-msgstr "deb [ opzioni ] uri distribuzione [componente1] [componente2] [...]"
+msgid ""
+" Types: deb deb-src\n"
+" URIs: http://example.com\n"
+" Suites: stable testing\n"
+" Sections: component1 component2\n"
+" Description: short\n"
+" long long long\n"
+" [option1]: [option1-value]\n"
+"\n"
+" Types: deb\n"
+" URIs: http://another.example.com\n"
+" Suites: experimental\n"
+" Sections: component1 component2\n"
+" Enabled: no\n"
+" Description: short\n"
+" long long long\n"
+" [option1]: [option1-value]\n"
+" "
+msgstr ""
+" Types: deb deb-src\n"
+" URIs: http://example.com\n"
+" Suites: stable testing\n"
+" Sections: componente1 componente2\n"
+" Description: breve\n"
+" lunga lunga lunga\n"
+" [opzione1]: [valore-opzione1]\n"
+"\n"
+" Types: deb\n"
+" URIs: http://another.example.com\n"
+" Suites: experimental\n"
+" Sections: componente1 componente2\n"
+" Enabled: no\n"
+" Description:breve\n"
+" lunga lunga lunga\n"
+" [opzione1]: [valore-opzione1]\n"
+" "
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml:84
+msgid ""
+"Alternatively a rfc822 style format is also supported: <placeholder type="
+"\"literallayout\" id=\"0\"/>"
+msgstr ""
+"In alternativa è gestito anche un formato in stile rfc822: <placeholder type="
+"\"literallayout\" id=\"0\"/>"
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:85
+#: sources.list.5.xml:105
+#| msgid ""
+#| "The URI for the <literal>deb</literal> type must specify the base of the "
+#| "Debian distribution, from which APT will find the information it needs. "
+#| "<literal>distribution</literal> can specify an exact path, in which case "
+#| "the components must be omitted and <literal>distribution</literal> must "
+#| "end with a slash (<literal>/</literal>). This is useful for the case when "
+#| "only a particular sub-section of the archive denoted by the URI is of "
+#| "interest. If <literal>distribution</literal> does not specify an exact "
+#| "path, at least one <literal>component</literal> must be present."
msgid ""
"The URI for the <literal>deb</literal> type must specify the base of the "
"Debian distribution, from which APT will find the information it needs. "
-"<literal>distribution</literal> can specify an exact path, in which case the "
-"components must be omitted and <literal>distribution</literal> must end with "
-"a slash (<literal>/</literal>). This is useful for the case when only a "
+"<literal>suite</literal> can specify an exact path, in which case the "
+"components must be omitted and <literal>suite</literal> must end with a "
+"slash (<literal>/</literal>). This is useful for the case when only a "
"particular sub-section of the archive denoted by the URI is of interest. If "
-"<literal>distribution</literal> does not specify an exact path, at least one "
+"<literal>suite</literal> does not specify an exact path, at least one "
"<literal>component</literal> must be present."
msgstr ""
"L'URI per il tipo <literal>deb</literal> deve specificare la base della "
-"distribuzione Debian, dalla quale APT troverà le informazioni necessarie. "
-"<literal>distribuzione</literal> può specificare un percorso esatto, nel "
-"qual caso le componenti devono essere omesse e <literal>distribuzione</"
-"literal> deve terminare con una sbarra (<literal>/</literal>). Questo è "
-"utile nel caso in cui si è interessati solo a una particolare sottosezione "
-"dell'archivio indicata dall'URI. Se <literal>distribuzione</literal> non "
-"specifica un percorso esatto, deve essere presente almeno una "
-"<literal>componente</literal>."
+"distribuzione Debian, dalla quale APT troverà le informazioni di cui ha "
+"bisogno. <literal>suite</literal> può specificare un percorso esatto, nel "
+"qual caso le componenti devono essere omesse e <literal>suite</literal> deve "
+"terminare con una sbarra (<literal>/</literal>). Questo è utile nel caso in "
+"cui si è interessati solo a una particolare sottosezione dell'archivio "
+"indicata dall'URI. Se <literal>suite</literal> non specifica un percorso "
+"esatto, deve essere presente almeno una <literal>componente</literal>."
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:94
-msgid ""
-"<literal>distribution</literal> may also contain a variable, <literal>"
-"$(ARCH)</literal> which expands to the Debian architecture (such as "
-"<literal>amd64</literal> or <literal>armel</literal>) used on the system. "
-"This permits architecture-independent <filename>sources.list</filename> "
-"files to be used. In general this is only of interest when specifying an "
-"exact path, <literal>APT</literal> will automatically generate a URI with "
-"the current architecture otherwise."
-msgstr ""
-"<literal>distribuzione</literal> può anche contenere una variabile <literal>"
-"$(ARCH)</literal> che viene espansa nell'architettura Debian (come "
+#: sources.list.5.xml:114
+#| msgid ""
+#| "<literal>distribution</literal> may also contain a variable, <literal>"
+#| "$(ARCH)</literal> which expands to the Debian architecture (such as "
+#| "<literal>amd64</literal> or <literal>armel</literal>) used on the system. "
+#| "This permits architecture-independent <filename>sources.list</filename> "
+#| "files to be used. In general this is only of interest when specifying an "
+#| "exact path, <literal>APT</literal> will automatically generate a URI with "
+#| "the current architecture otherwise."
+msgid ""
+"<literal>suite</literal> may also contain a variable, <literal>$(ARCH)</"
+"literal> which expands to the Debian architecture (such as <literal>amd64</"
+"literal> or <literal>armel</literal>) used on the system. This permits "
+"architecture-independent <filename>sources.list</filename> files to be used. "
+"In general this is only of interest when specifying an exact path, "
+"<literal>APT</literal> will automatically generate a URI with the current "
+"architecture otherwise."
+msgstr ""
+"<literal>suite</literal> può anche contenere una variabile "
+"<literal>$(ARCH)</literal> che viene espansa nell'architettura Debian (come "
"<literal>amd64</literal> o <literal>armel</literal>) usata nel sistema. Ciò "
"consente di utilizzare file <filename>sources.list</filename> indipendenti "
"dall'architettura. In generale questo è interessante solo quando viene "
"automaticamente un URI con l'architettura corrente."
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:102
-msgid ""
-"Since only one distribution can be specified per line it may be necessary to "
-"have multiple lines for the same URI, if a subset of all available "
-"distributions or components at that location is desired. APT will sort the "
-"URI list after it has generated a complete set internally, and will collapse "
-"multiple references to the same Internet host, for instance, into a single "
-"connection, so that it does not inefficiently establish an FTP connection, "
-"close it, do something else, and then re-establish a connection to that same "
-"host. This feature is useful for accessing busy FTP sites with limits on the "
-"number of simultaneous anonymous users. APT also parallelizes connections to "
-"different hosts to more effectively deal with sites with low bandwidth."
-msgstr ""
-"Dato che può essere specificata solo una distribuzione per riga, può essere "
-"necessario avere più righe per lo stesso URI, se si desidera un sottoinsieme "
-"di tutte le distribuzioni o componenti disponibili in quella posizione. APT "
-"ordinerà la lista degli URI dopo aver generato internamente un insieme "
-"completo, e riunirà i riferimenti multipli, per esempio al medesimo host "
-"Internet in una singola connessione; in questo modo non stabilisce in modo "
-"inefficiente una connessione FTP per poi chiuderla, fare qualcos'altro e "
-"quindi ristabilire una connessione con il medesimo host. Questa funzionalità "
-"è utile per accedere a siti FTP molto impegnati con un limite al numero di "
-"accessi anonimi contemporanei. APT inoltre parallelizza le connessioni a "
-"host differenti, per gestire in maniera più efficiente i siti con scarsa "
+#: sources.list.5.xml:122
+#| msgid ""
+#| "Since only one distribution can be specified per line it may be necessary "
+#| "to have multiple lines for the same URI, if a subset of all available "
+#| "distributions or components at that location is desired. APT will sort "
+#| "the URI list after it has generated a complete set internally, and will "
+#| "collapse multiple references to the same Internet host, for instance, "
+#| "into a single connection, so that it does not inefficiently establish an "
+#| "FTP connection, close it, do something else, and then re-establish a "
+#| "connection to that same host. This feature is useful for accessing busy "
+#| "FTP sites with limits on the number of simultaneous anonymous users. APT "
+#| "also parallelizes connections to different hosts to more effectively deal "
+#| "with sites with low bandwidth."
+msgid ""
+"In the traditional style sources.list format since only one distribution can "
+"be specified per line it may be necessary to have multiple lines for the "
+"same URI, if a subset of all available distributions or components at that "
+"location is desired. APT will sort the URI list after it has generated a "
+"complete set internally, and will collapse multiple references to the same "
+"Internet host, for instance, into a single connection, so that it does not "
+"inefficiently establish an FTP connection, close it, do something else, and "
+"then re-establish a connection to that same host. This feature is useful for "
+"accessing busy FTP sites with limits on the number of simultaneous anonymous "
+"users. APT also parallelizes connections to different hosts to more "
+"effectively deal with sites with low bandwidth."
+msgstr ""
+"Dato che, nel formato di sources.list in stile tradizionale, può essere "
+"specificata solo una distribuzione per riga, può essere necessario avere più "
+"righe per lo stesso URI, se si desidera un sottoinsieme di tutte le "
+"distribuzioni o componenti disponibili in quella posizione. APT ordinerà la "
+"lista degli URI dopo aver generato internamente un insieme completo, e "
+"riunirà i riferimenti multipli, per esempio al medesimo host Internet in una "
+"singola connessione; in questo modo non stabilisce in modo inefficiente una "
+"connessione FTP per poi chiuderla, fare qualcos'altro e quindi ristabilire "
+"una connessione con il medesimo host. Questa funzionalità è utile per "
+"accedere a siti FTP molto impegnati con un limite al numero di accessi "
+"anonimi contemporanei. APT inoltre parallelizza le connessioni a host "
+"differenti, per gestire in maniera più efficiente i siti con scarsa "
"larghezza di banda."
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:114
+#: sources.list.5.xml:136
msgid ""
"<literal>options</literal> is always optional and needs to be surrounded by "
"square brackets. It can consist of multiple settings in the form "
"supportate verranno ignorate in modo silenzioso):"
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: sources.list.5.xml:120
+#: sources.list.5.xml:142
msgid ""
"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
"replaceable>,…</literal> can be used to specify for which architectures "
"Architectures</literal>."
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: sources.list.5.xml:124
-#, fuzzy
+#: sources.list.5.xml:146
#| msgid ""
#| "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
#| "replaceable>,…</literal> can be used to specify for which architectures "
"<replaceable>arch2</replaceable>,…</literal> which can be used to add/remove "
"architectures from the set which will be downloaded."
msgstr ""
-"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
-"replaceable>,…</literal> può essere usato per specificare le architetture "
-"per le quali scaricare le informazioni. Se questa opzione non è impostata "
-"verranno scaricate tutte le architetture definite dall'opzione <literal>APT::"
-"Architectures</literal>."
+"<literal>arch+=<replaceable>arch1</replaceable>,<replaceable>arch2</replaceab"
+"le>,…</literal> e <literal>arch-=<replaceable>arch1</replaceable>,<replaceabl"
+"e>arch2</replaceable>,…</literal> possono essere usati per aggiungere e "
+"rimuovere architetture dall'insieme di quelle che verranno scaricate."
#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
-#: sources.list.5.xml:127
+#: sources.list.5.xml:149
msgid ""
"<literal>trusted=yes</literal> can be set to indicate that packages from "
"this source are always authenticated even if the <filename>Release</"
"tratta anche le fonti correttamente autenticate come non autenticate."
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:134
+#: sources.list.5.xml:156
msgid ""
"It is important to list sources in order of preference, with the most "
"preferred source listed first. Typically this will result in sorting by "
"in una rete locale, seguiti da host Internet distanti)."
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:139
+#: sources.list.5.xml:161
msgid "Some examples:"
msgstr "Alcuni esempi:"
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:141
+#: sources.list.5.xml:163
#, no-wrap
msgid ""
"deb http://ftp.debian.org/debian &stable-codename; main contrib non-free\n"
" "
#. type: Content of: <refentry><refsect1><title>
-#: sources.list.5.xml:147
+#: sources.list.5.xml:169
msgid "URI specification"
msgstr "Specificare URI"
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:149
+#: sources.list.5.xml:171
msgid "The currently recognized URI types are:"
msgstr "I tipi di URI attualmente riconosciuti sono:"
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:153
+#: sources.list.5.xml:175
msgid ""
"The file scheme allows an arbitrary directory in the file system to be "
"considered an archive. This is useful for NFS mounts and local mirrors or "
"archivi locali."
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:160
+#: sources.list.5.xml:182
msgid ""
"The cdrom scheme allows APT to use a local CD-ROM drive with media swapping. "
"Use the &apt-cdrom; program to create cdrom entries in the source list."
"delle fonti."
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:167
+#: sources.list.5.xml:189
msgid ""
"The http scheme specifies an HTTP server for the archive. If an environment "
"variable <envar>http_proxy</envar> is set with the format http://server:"
"è un metodo di autenticazione non sicuro."
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:178
+#: sources.list.5.xml:200
msgid ""
"The ftp scheme specifies an FTP server for the archive. APT's FTP behavior "
"is highly configurable; for more information see the &apt-conf; manual page. "
"HTTP specificati nel file di configurazione verranno ignorati."
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:190
+#: sources.list.5.xml:212
msgid ""
"The copy scheme is identical to the file scheme except that packages are "
"copied into the cache directory instead of used directly at their location. "
"rimovibili, per copiare i file nelle varie posizioni con APT."
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:197
+#: sources.list.5.xml:219
msgid ""
"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access "
"the files as a given user. Prior configuration of rhosts or RSA keys is "
"command> e <command>dd</command>."
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: sources.list.5.xml:204
+#: sources.list.5.xml:226
msgid "adding more recognizable URI types"
msgstr "aggiungere ulteriori tipi di URI riconoscibili"
#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: sources.list.5.xml:206
+#: sources.list.5.xml:228
msgid ""
"APT can be extended with more methods shipped in other optional packages, "
"which should follow the naming scheme <package>apt-transport-"
"debtorrrent; vedere &apt-transport-debtorrent;."
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:218
+#: sources.list.5.xml:240
msgid ""
"Uses the archive stored locally (or NFS mounted) at /home/jason/debian for "
"stable/main, stable/contrib, and stable/non-free."
"debian per stable/main, stable/contrib e stable/non-free."
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:220
+#: sources.list.5.xml:242
#, no-wrap
msgid "deb file:/home/jason/debian stable main contrib non-free"
msgstr "deb file:/home/gianni/debian stable main contrib non-free"
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:222
+#: sources.list.5.xml:244
msgid "As above, except this uses the unstable (development) distribution."
msgstr ""
"Come sopra, tranne per il fatto che usa la distribuzione unstable (di "
"sviluppo)"
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:223
+#: sources.list.5.xml:245
#, no-wrap
msgid "deb file:/home/jason/debian unstable main contrib non-free"
msgstr "deb file:/home/gianni/debian unstable main contrib non-free"
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:225
+#: sources.list.5.xml:247
msgid "Source line for the above"
msgstr "Riga per i sorgenti corrispondente alla precedente"
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:226
+#: sources.list.5.xml:248
#, no-wrap
msgid "deb-src file:/home/jason/debian unstable main contrib non-free"
msgstr "deb-src file:/home/gianni/debian unstable main contrib non-free"
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:228
+#: sources.list.5.xml:250
msgid ""
"The first line gets package information for the architectures in "
"<literal>APT::Architectures</literal> while the second always retrieves "
"<literal>amd64</literal> e <literal>armel</literal>."
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:230
+#: sources.list.5.xml:252
#, no-wrap
msgid ""
"deb http://ftp.debian.org/debian &stable-codename; main\n"
"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &stable-codename; main"
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:233
+#: sources.list.5.xml:255
msgid ""
"Uses HTTP to access the archive at archive.debian.org, and uses only the "
"hamm/main area."
"hamm/main."
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:235
+#: sources.list.5.xml:257
#, no-wrap
msgid "deb http://archive.debian.org/debian-archive hamm main"
msgstr "deb http://archive.debian.org/debian-archive hamm main"
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:237
+#: sources.list.5.xml:259
msgid ""
"Uses FTP to access the archive at ftp.debian.org, under the debian "
"directory, and uses only the &stable-codename;/contrib area."
"e usa solo l'area &stable-codename;/contrib."
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:239
+#: sources.list.5.xml:261
#, no-wrap
msgid "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
msgstr "deb ftp://ftp.debian.org/debian &stable-codename; contrib"
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:241
+#: sources.list.5.xml:263
msgid ""
"Uses FTP to access the archive at ftp.debian.org, under the debian "
"directory, and uses only the unstable/contrib area. If this line appears as "
"usata una sola sessione FTP per entrambe le righe."
#. type: Content of: <refentry><refsect1><literallayout>
-#: sources.list.5.xml:245
+#: sources.list.5.xml:267
#, no-wrap
msgid "deb ftp://ftp.debian.org/debian unstable contrib"
msgstr "deb ftp://ftp.debian.org/debian unstable contrib"
#. type: Content of: <refentry><refsect1><para><literallayout>
-#: sources.list.5.xml:254
+#: sources.list.5.xml:276
#, no-wrap
msgid "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
msgstr "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:247
+#: sources.list.5.xml:269
msgid ""
"Uses HTTP to access the archive at ftp.tlh.debian.org, under the universe "
"directory, and uses only files found under <filename>unstable/binary-i386</"
"modo.] <placeholder type=\"literallayout\" id=\"0\"/>"
#. type: Content of: <refentry><refsect1><para>
-#: sources.list.5.xml:259
+#: sources.list.5.xml:281
msgid "&apt-cache; &apt-conf;"
msgstr "&apt-cache; &apt-conf;"
#. type: <p></p>
#: guide.sgml:163
+#| msgid ""
+#| "<prgn>apt-get</prgn> has several command line options that are detailed "
+#| "in its man page, <manref section=\"8\" name=\"apt-get\">. The most useful "
+#| "option is <tt>-d</tt> which does not install the fetched files. If the "
+#| "system has to download a large number of package it would be undesired to "
+#| "start installing them in case something goes wrong. When <tt>-d</tt> is "
+#| "used the downloaded archives can be installed by simply running the "
+#| "command that caused them to be downloaded again without <tt>-d</tt>."
msgid ""
"<prgn>apt-get</prgn> has several command line options that are detailed in "
"its man page, <manref section=\"8\" name=\"apt-get\">. The most useful "
"caused them to be downloaded again without <tt>-d</tt>."
msgstr ""
"<prgn>apt-get</prgn> ha diverse opzioni per la riga di comando, che sono "
-"documentate dettagliatamente nella sua pagina di manuale, <manref section="
-"\"8\" name=\"apt-get\">. L'opzione più utile è <tt>-d</tt>, che non installa "
-"i file scaricati; se il sistema deve scaricare un gran numero di pacchetti, "
+"documentate dettagliatamente nella sua pagina di manuale, <manref section=\""
+"8\" name=\"apt-get\">. L'opzione più utile è <tt>-d</tt>, che non installa i "
+"file scaricati; se il sistema deve scaricare un gran numero di pacchetti, "
"non è bene iniziare ad installarli nel caso qualcosa dovesse andare storto. "
"Quando si usa <tt>-d</tt>, gli archivi scaricati possono essere installati "
-"semplicemente eseguendo di nuovo lo stesso comando senza l'opzione <tt>-d</"
-"tt>."
+"semplicemente eseguendo di nuovo lo stesso comando senza l'opzione "
+"<tt>-d</tt>."
#. type: <heading></heading>
#: guide.sgml:168
projects / apt.git / blobdiff