+msgid "Unable to connect to %s:%s:"
+msgstr "不能连接到 %s：%s："
+
+#: methods/copy.cc methods/store.cc
+msgid "Failed to stat"
+msgstr "无法读取状态"
+
+#: methods/copy.cc methods/rred.cc methods/store.cc
+msgid "Failed to set modification time"
+msgstr "无法设置文件的修改日期"
+
+#: methods/file.cc
+msgid "Invalid URI, local URIS must not start with //"
+msgstr "无效的 URI，本地 URI 不能以 // 开头"
+
+#. Login must be before getpeername otherwise dante won't work.
+#: methods/ftp.cc
+msgid "Logging in"
+msgstr "正在登录"
+
+#: methods/ftp.cc
+msgid "Unable to determine the peer name"
+msgstr "无法获知对方主机名"
+
+#: methods/ftp.cc
+msgid "Unable to determine the local name"
+msgstr "无法获知本地主机名"
+
+#: methods/ftp.cc
+#, c-format
+msgid "The server refused the connection and said: %s"
+msgstr "服务器拒绝了我们的连接，响应信息为：%s"
+
+#: methods/ftp.cc
+#, c-format
+msgid "USER failed, server said: %s"
+msgstr "USER 指令出错，服务器响应信息为：%s"
+
+#: methods/ftp.cc
+#, c-format
+msgid "PASS failed, server said: %s"
+msgstr "PASS 指令出错，服务器响应信息为：%s"
+
+#: methods/ftp.cc
+msgid ""
+"A proxy server was specified but no login script, Acquire::ftp::ProxyLogin "
+"is empty."
+msgstr ""
+"您指定了代理服务器，但是没有登陆脚本，Acquire::ftp::ProxyLogin 设置为空。"
+
+#: methods/ftp.cc
+#, c-format
+msgid "Login script command '%s' failed, server said: %s"
+msgstr "登录脚本命令“%s”出错，服务器响应信息为：%s"
+
+#: methods/ftp.cc
+#, c-format
+msgid "TYPE failed, server said: %s"
+msgstr "TYPE 指令出错，服务器响应信息为：%s"
+
+#: methods/ftp.cc methods/rsh.cc
+msgid "Connection timeout"
+msgstr "连接超时"
+
+#: methods/ftp.cc
+msgid "Server closed the connection"
+msgstr "服务器关闭了连接"
+
+#: methods/ftp.cc methods/rsh.cc apt-pkg/contrib/fileutl.cc
+msgid "Read error"
+msgstr "读错误"
+
+#: methods/ftp.cc methods/rsh.cc
+msgid "A response overflowed the buffer."
+msgstr "回应超出了缓存区大小。"
+
+#: methods/ftp.cc
+msgid "Protocol corruption"
+msgstr "协议有误"
+
+#: methods/ftp.cc methods/rsh.cc apt-pkg/contrib/fileutl.cc
+msgid "Write error"
+msgstr "写出错"
+
+#: methods/ftp.cc
+msgid "Could not create a socket"
+msgstr "无法创建套接字"
+
+#: methods/ftp.cc
+msgid "Could not connect data socket, connection timed out"
+msgstr "无法连接数据套接字，连接超时"
+
+#: methods/ftp.cc
+msgid "Could not connect passive socket."
+msgstr "无法连接被动模式的套接字。"
+
+#: methods/ftp.cc
+msgid "getaddrinfo was unable to get a listening socket"
+msgstr "getaddrinfo 无法得到监听套接字"
+
+#: methods/ftp.cc
+msgid "Could not bind a socket"
+msgstr "无法绑定套接字"
+
+#: methods/ftp.cc
+msgid "Could not listen on the socket"
+msgstr "无法在套接字上监听"
+
+#: methods/ftp.cc
+msgid "Could not determine the socket's name"
+msgstr "无法确定套接字的名字"
+
+#: methods/ftp.cc
+msgid "Unable to send PORT command"
+msgstr "无法发出 PORT 指令"
+
+#: methods/ftp.cc
+#, c-format
+msgid "Unknown address family %u (AF_*)"
+msgstr "无法识别的地址族 %u (AF_*)"
+
+#: methods/ftp.cc
+#, c-format
+msgid "EPRT failed, server said: %s"
+msgstr "EPRT 指令失败，服务器响应为：%s"
+
+#: methods/ftp.cc
+msgid "Data socket connect timed out"
+msgstr "数据套接字连接超时"
+
+#: methods/ftp.cc
+msgid "Unable to accept connection"
+msgstr "无法接受连接"
+
+#: methods/ftp.cc methods/rsh.cc methods/server.cc
+msgid "Problem hashing file"
+msgstr "把文件加入哈希表时出错"
+
+#: methods/ftp.cc
+#, c-format
+msgid "Unable to fetch file, server said '%s'"
+msgstr "无法获取文件，服务器响应为“%s”"
+
+#: methods/ftp.cc methods/rsh.cc
+msgid "Data socket timed out"
+msgstr "数据套接字超时"
+
+#: methods/ftp.cc
+#, c-format
+msgid "Data transfer failed, server said '%s'"
+msgstr "数据传送出错，服务器响应为“%s”"
+
+#. Get the files information
+#: methods/ftp.cc
+msgid "Query"
+msgstr "查询"
+
+#: methods/ftp.cc
+msgid "Unable to invoke "
+msgstr "无法调用 "
+
+#. TRANSLATORS: %s is a single techy word like 'NODATA'
+#: methods/gpgv.cc apt-pkg/acquire-item.cc
+#, c-format
+msgid ""
+"Clearsigned file isn't valid, got '%s' (does the network require "
+"authentication?)"
+msgstr "明文签署文件不可用，结果为‘%s’（您的网络需要认证吗？）"
+
+#. TRANSLATORS: %s is a single techy word like 'NODATA'
+#: methods/gpgv.cc
+#, c-format
+msgid ""
+"Signed file isn't valid, got '%s' (does the network require authentication?)"
+msgstr "明文签署文件不可用，结果为‘%s’（您的网络接入需要认证吗？）"
+
+#: methods/gpgv.cc
+msgid "At least one invalid signature was encountered."
+msgstr "至少发现一个无效的签名。"
+
+#: methods/gpgv.cc
+msgid ""
+"Internal error: Good signature, but could not determine key fingerprint?!"
+msgstr "内部错误：签名正确无误，但是无法确认密钥指纹？！"
+
+#: methods/gpgv.cc
+msgid "Could not execute 'apt-key' to verify signature (is gnupg installed?)"
+msgstr "无法运行 apt-key 以验证签名(您安装了 gnupg 吗？)"
+
+#: methods/gpgv.cc
+msgid "Unknown error executing apt-key"
+msgstr "运行 apt-key 时发生未知错误"
+
+#. TRANSLATORS: The second %s is the reason and is untranslated for repository owners.
+#: methods/gpgv.cc
+#, c-format
+msgid "Signature by key %s uses weak digest algorithm (%s)"
+msgstr "密钥 %s 生成的数字签名使用了弱安全性摘要算法(%s)"
+
+#: methods/gpgv.cc
+msgid "The following signatures were invalid:\n"
+msgstr "下列签名无效：\n"
+
+#: methods/gpgv.cc
+msgid ""
+"The following signatures couldn't be verified because the public key is not "
+"available:\n"
+msgstr "由于没有公钥，无法验证下列签名：\n"
+
+#: methods/http.cc
+msgid "Error writing to the file"
+msgstr "写入文件出错"
+
+#: methods/http.cc
+msgid "Error reading from server. Remote end closed connection"
+msgstr "从服务器读取数据时出错，对方关闭了连接"
+
+#: methods/http.cc
+msgid "Error reading from server"
+msgstr "从服务器读取数据出错"
+
+#: methods/http.cc
+msgid "Error writing to file"
+msgstr "写入文件出错"
+
+#: methods/http.cc
+msgid "Select failed"
+msgstr "select 调用出错"
+
+#: methods/http.cc
+msgid "Connection timed out"
+msgstr "连接超时"
+
+#: methods/http.cc
+msgid "Error writing to output file"
+msgstr "写输出文件时出错"
+
+#. Only warn if there are no sources.list.d.
+#. Only warn if there is no sources.list file.
+#: methods/mirror.cc apt-inst/extract.cc apt-pkg/acquire.cc apt-pkg/clean.cc
+#: apt-pkg/contrib/cdromutl.cc apt-pkg/contrib/fileutl.cc apt-pkg/init.cc
+#: apt-pkg/policy.cc apt-pkg/sourcelist.cc
+#, c-format
+msgid "Unable to read %s"
+msgstr "无法读取 %s"
+
+#: methods/mirror.cc apt-pkg/acquire.cc apt-pkg/clean.cc
+#: apt-pkg/contrib/cdromutl.cc
+#, c-format
+msgid "Unable to change to %s"
+msgstr "无法切换工作目录到 %s"
+
+#. FIXME: fallback to a default mirror here instead
+#. and provide a config option to define that default
+#: methods/mirror.cc
+#, c-format
+msgid "No mirror file '%s' found "
+msgstr "没有找到镜像文件 %s"
+
+#. FIXME: fallback to a default mirror here instead
+#. and provide a config option to define that default
+#: methods/mirror.cc
+#, c-format
+msgid "Can not read mirror file '%s'"
+msgstr "无法读取镜像文件 %s"
+
+#: methods/mirror.cc
+#, c-format
+msgid "No entry found in mirror file '%s'"
+msgstr "在镜像文件 %s 中未找到所需条目"
+
+#: methods/mirror.cc
+#, c-format
+msgid "[Mirror: %s]"
+msgstr "[镜像：%s]"
+
+#: methods/rred.cc ftparchive/cachedb.cc apt-inst/extract.cc
+#: apt-pkg/acquire-item.cc
+#, c-format
+msgid "Failed to stat %s"
+msgstr "无法获得 %s 的状态"
+
+#: methods/rsh.cc ftparchive/multicompress.cc
+msgid "Failed to create IPC pipe to subprocess"
+msgstr "无法为子进程创建 IPC 管道"
+
+#: methods/rsh.cc
+msgid "Connection closed prematurely"
+msgstr "连接被永久关闭"
+
+#: methods/server.cc
+msgid "Waiting for headers"
+msgstr "正在等待报头"
+
+#: methods/server.cc
+msgid "Bad header line"
+msgstr "错误的报头行"
+
+#: methods/server.cc
+msgid "The HTTP server sent an invalid reply header"
+msgstr "该 HTTP 服务器发送了一个无效的应答报头"
+
+#: methods/server.cc
+msgid "The HTTP server sent an invalid Content-Length header"
+msgstr "该 HTTP 服务器发送了一个无效的 Content-Length 报头"
+
+#: methods/server.cc
+msgid "The HTTP server sent an invalid Content-Range header"
+msgstr "该 HTTP 服务器发送了一个无效的 Content-Range 报头"
+
+#: methods/server.cc
+msgid "This HTTP server has broken range support"
+msgstr "该 HTTP 服务器的 range 支持不正常"
+
+#: methods/server.cc
+msgid "Unknown date format"
+msgstr "无法识别的日期格式"
+
+#: methods/server.cc
+msgid "Bad header data"
+msgstr "错误的报头数据"
+
+#: methods/server.cc
+msgid "Connection failed"
+msgstr "连接失败"
+
+#: methods/server.cc
+#, c-format
+msgid ""
+"Automatically disabled %s due to incorrect response from server/proxy. (man "
+"5 apt.conf)"
+msgstr "由于服务器或代理的响应错误，因此自动禁止 %s。（参见 man 5 apt.conf）"
+
+#: methods/server.cc
+msgid "Internal error"
+msgstr "内部错误"
+
+#: methods/store.cc
+msgid "Empty files can't be valid archives"
+msgstr "空文件不是有效归档"
+
+#: dselect/install:33
+msgid "Bad default setting!"
+msgstr "错误的默认设置！"
+
+#: dselect/install:52 dselect/install:84 dselect/install:88 dselect/install:95
+#: dselect/install:106 dselect/update:45
+msgid "Press [Enter] to continue."
+msgstr "按「回车键」继续。"
+
+#: dselect/install:92
+msgid "Do you want to erase any previously downloaded .deb files?"
+msgstr "您想要删除之前下载的所有 .deb 文件吗？"
+
+#: dselect/install:102
+msgid "Some errors occurred while unpacking. Packages that were installed"
+msgstr "在解压时发生了一些错误。已经安装的软件包"
+
+#: dselect/install:103
+msgid "will be configured. This may result in duplicate errors"
+msgstr "将被配置。这个操作可能会导致出现重复的错误"
+
+#: dselect/install:104
+msgid "or errors caused by missing dependencies. This is OK, only the errors"
+msgstr "或一些由于依赖关系不能满足所产生的错误。这个问题不大，只有"
+
+#: dselect/install:105
+msgid ""
+"above this message are important. Please fix them and run [I]nstall again"
+msgstr "这个提示之前的错误消息才值得您注意。请更正它们，然后再次执行 [I]nstall"
+
+#: dselect/update:30
+msgid "Merging available information"
+msgstr "正在合并可用信息"
+
+#: cmdline/apt-dump-solver.cc
+msgid ""
+"Usage: apt-dump-solver\n"
+"\n"
+"apt-dump-solver is an interface to store an EDSP scenario in\n"
+"a file and optionally forwards it to another solver.\n"
+msgstr ""
+
+#: cmdline/apt-dump-solver.cc apt-pkg/contrib/fileutl.cc
+#: apt-pkg/contrib/gpgv.cc apt-pkg/deb/debsystem.cc
+#, c-format
+msgid "Waited for %s but it wasn't there"
+msgstr "等待子进程 %s 的退出，但是它并不存在"
+
+#: cmdline/apt-extracttemplates.cc
+msgid ""
+"Usage: apt-extracttemplates file1 [file2 ...]\n"
+"\n"
+"apt-extracttemplates is used to extract config and template files\n"
+"from debian packages. It is used mainly by debconf(1) to prompt for\n"
+"configuration questions before installation of packages.\n"
+msgstr ""
+"用法： apt-extracttemplates 文件1 [文件2 ...]\n"
+"\n"
+"apt-extracttemplates 可以从 debian 软件包中解压出配置文件和模板\n"
+"信息。它主要被 debconf(1) 用于在安装软件包前询问用户配置问题。\n"
+
+#: cmdline/apt-extracttemplates.cc apt-pkg/contrib/fileutl.cc
+#, c-format
+msgid "Unable to mkstemp %s"
+msgstr "无法建立临时文件(mkstemp) %s "
+
+#: cmdline/apt-extracttemplates.cc apt-pkg/contrib/fileutl.cc
+#, c-format
+msgid "Unable to write to %s"
+msgstr "无法写入 %s"
+
+#: cmdline/apt-extracttemplates.cc
+msgid "Cannot get debconf version. Is debconf installed?"
+msgstr "无法获得 debconf 的版本。您安装了 debconf 吗？"
+
+#: cmdline/apt-internal-solver.cc
+msgid ""
+"Usage: apt-internal-solver\n"
+"\n"
+"apt-internal-solver is an interface to use the current internal\n"
+"resolver for the APT family like an external one, for debugging or\n"
+"the like.\n"
+msgstr ""
+"用法： apt-internal-solver\n"
+"\n"
+"apt-internal-solver 可以像外部解析器那样使用当前的APT家族内部解析器，\n"
+"以便调试等用途。\n"
+
+#: cmdline/apt-sortpkgs.cc
+msgid "Unknown package record!"
+msgstr "未知的软件包记录！"
+
+#: cmdline/apt-sortpkgs.cc
+msgid ""
+"Usage: apt-sortpkgs [options] file1 [file2 ...]\n"
+"\n"
+"apt-sortpkgs is a simple tool to sort package information files.\n"
+"By default it sorts by binary package information, but the -s option\n"
+"can be used to switch to source package ordering instead.\n"
+msgstr ""
+"用法： apt-sortpkgs [选项] 文件1 [文件2 ...]\n"
+"\n"
+"简易工具 apt-sortpkgs 用于排序软件包信息。\n"
+"它默认对二进制包信息排序，但是 -s 选项可以将其切换为\n"
+"对源码包排序。\n"
+
+#: ftparchive/apt-ftparchive.cc
+msgid "Package extension list is too long"
+msgstr "软件包的扩展列表太长"
+
+#: ftparchive/apt-ftparchive.cc
+#, c-format
+msgid "Error processing directory %s"
+msgstr "处理目录 %s 时出错"
+
+#: ftparchive/apt-ftparchive.cc
+msgid "Source extension list is too long"
+msgstr "源扩展列表太长"
+
+#: ftparchive/apt-ftparchive.cc
+msgid "Error writing header to contents file"
+msgstr "将头写入到目录文件时出错"
+
+#: ftparchive/apt-ftparchive.cc
+#, c-format
+msgid "Error processing contents %s"
+msgstr "处理目录 %s 时出错"
+
+#: ftparchive/apt-ftparchive.cc
+msgid ""
+"Usage: apt-ftparchive [options] command\n"
+"Commands: packages binarypath [overridefile [pathprefix]]\n"
+" sources srcpath [overridefile [pathprefix]]\n"
+" contents path\n"
+" release path\n"
+" generate config [groups]\n"
+" clean config\n"
+"\n"
+"apt-ftparchive generates index files for Debian archives. It supports\n"
+"many styles of generation from fully automated to functional replacements\n"
+"for dpkg-scanpackages and dpkg-scansources\n"
+"\n"
+"apt-ftparchive generates Package files from a tree of .debs. The\n"
+"Package file contains the contents of all the control fields from\n"
+"each package as well as the MD5 hash and filesize. An override file\n"
+"is supported to force the value of Priority and Section.\n"
+"\n"
+"Similarly apt-ftparchive generates Sources files from a tree of .dscs.\n"
+"The --source-override option can be used to specify a src override file\n"
+"\n"
+"The 'packages' and 'sources' command should be run in the root of the\n"
+"tree. BinaryPath should point to the base of the recursive search and \n"
+"override file should contain the override flags. Pathprefix is\n"
+"appended to the filename fields if present. Example usage from the \n"
+"Debian archive:\n"
+" apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n"
+" dists/potato/main/binary-i386/Packages\n"
+"\n"
+"Options:\n"
+" -h This help text\n"
+" --md5 Control MD5 generation\n"
+" -s=? Source override file\n"
+" -q Quiet\n"
+" -d=? Select the optional caching database\n"
+" --no-delink Enable delinking debug mode\n"
+" --contents Control contents file generation\n"
+" -c=? Read this configuration file\n"
+" -o=? Set an arbitrary configuration option"
+msgstr ""
+"用法： apt-ftparchive [选项] 命令\n"
+"命令： packages 二进制软件包搜索路径 [overridefile [路径前缀]]\n"
+" sources 源代码包搜索路径 [overridefile [路径前缀]]\n"
+" contents 搜索路径\n"
+" release 搜索路径\n"
+" generate 配置文件 [groups]\n"
+" clean 配置文件\n"
+"\n"
+"apt-ftparchive 被用来为 Debian 软件包生成索引文件。它能支持\n"
+"多种生成索引的方式，从全自动的索引生成到在功能上取代 dpkg-scanpackages \n"
+"和 dpkg-scansources，都能游刃有余\n"
+"\n"
+"apt-ftparchive 能依据一个由 .deb 文件构成的文件树生成 Package 文件。\n"
+"Package 文件里不仅注有每个软件包的 MD5 校验码和文件大小，\n"
+"还有软件包的所有控制字段的内容。该软件同时支持 override 文件，\n"
+"通过它可以强制指定软件包的优先级及其所属的软件类别。\n"
+"\n"
+"与上面类似，apt-ftparchive 也能由 .dsc 的文件树生成 Source 文件。\n"
+"可以通过使用 --source-override 选项来指定一个 override 文件\n"
+"\n"
+"使用“packages”和“source”命令时，必须在文件树的根部执行本程序。\n"
+"二进制包的搜索路径一定要是递归搜索的底层，而且 override 文件里\n"
+"应该注明 override 的标志。若指定了路径前缀，那么它会被加到文件名前面。\n"
+"下面有个来自 Debian 文档的例子：\n"
+" apt-ftparchive packages dists/potato/main/binary-i386 > \\\n"
+" dists/potato/main/binary-i386/Packages\n"
+"\n"
+"选项:\n"
+" -h 本帮助文档\n"
+" --md5 使之生成 MD5 校验和\n"
+" -s=? 源代码包 override 文件\n"
+" -q 输出精简信息\n"
+" -d=? 指定可选的缓存数据库\n"
+" -d=? 使用另一个可选的缓存数据库\n"
+" --no-delink 开启delink的调试模式\n"
+" --contents 使之生成控制内容文件\n"
+" -c=? 读取指定配置文件\n"
+" -o=? 设置任意指定的配置选项"
+
+#: ftparchive/apt-ftparchive.cc
+msgid "No selections matched"
+msgstr "没有任何选定项是匹配的"
projects / apt.git / blobdiff