msgid ""
msgstr ""
"Project-Id-Version: 0.5.4\n"
-"Report-Msgid-Bugs-To: deity@lists.debian.org\n"
-"POT-Creation-Date: 2012-04-11 17:55+0200\n"
+"Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
+"POT-Creation-Date: 2012-06-27 11:17+0200\n"
"PO-Revision-Date: 2009-01-28 10:41+0800\n"
"Last-Translator: Tetralet <tetralet@gmail.com>\n"
"Language-Team: Debian-user in Chinese [Big5] <debian-chinese-big5@lists."
msgstr "套件檔 %s 未同步。"
#: cmdline/apt-cache.cc:593 cmdline/apt-cache.cc:1378
-#: cmdline/apt-cache.cc:1380 cmdline/apt-cache.cc:1457 cmdline/apt-mark.cc:40
-#: cmdline/apt-mark.cc:87 cmdline/apt-mark.cc:163
+#: cmdline/apt-cache.cc:1380 cmdline/apt-cache.cc:1457 cmdline/apt-mark.cc:46
+#: cmdline/apt-mark.cc:93 cmdline/apt-mark.cc:219
msgid "No packages found"
msgstr "未找到套件"
msgid "This command is deprecated. Please use 'apt-mark showauto' instead."
msgstr ""
-#: cmdline/apt-cache.cc:1452 apt-pkg/cacheset.cc:459
+#: cmdline/apt-cache.cc:1452 apt-pkg/cacheset.cc:508
#, c-format
msgid "Unable to locate package %s"
msgstr "找不到套件 %s"
msgid " Version table:"
msgstr " 版本列表："
-#: cmdline/apt-cache.cc:1679 cmdline/apt-cdrom.cc:199 cmdline/apt-config.cc:75
-#: cmdline/apt-extracttemplates.cc:227 ftparchive/apt-ftparchive.cc:590
-#: cmdline/apt-get.cc:3255 cmdline/apt-internal-solver.cc:32
-#: cmdline/apt-mark.cc:267 cmdline/apt-sortpkgs.cc:147
+#: cmdline/apt-cache.cc:1679 cmdline/apt-cdrom.cc:198 cmdline/apt-config.cc:81
+#: cmdline/apt-get.cc:3350 cmdline/apt-mark.cc:363
+#: cmdline/apt-extracttemplates.cc:229 ftparchive/apt-ftparchive.cc:590
+#: cmdline/apt-internal-solver.cc:33 cmdline/apt-sortpkgs.cc:147
#, c-format
msgid "%s %s for %s compiled on %s %s\n"
msgstr "%s %s 是用於 %s 並在 %s %s 上編譯的\n"
msgid "Failed to mount '%s' to '%s'"
msgstr "無法將 %s 更名為 %s"
-#: cmdline/apt-cdrom.cc:164
+#: cmdline/apt-cdrom.cc:163
msgid "Repeat this process for the rest of the CDs in your set."
msgstr "請對您的光碟組中的其它光碟重複相同的操作。"
msgid "Arguments not in pairs"
msgstr "參數並未成對"
-#: cmdline/apt-config.cc:81
+#: cmdline/apt-config.cc:87
msgid ""
"Usage: apt-config [options] command\n"
"\n"
" -c=? 讀取指定的設定檔\n"
" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
-#: cmdline/apt-extracttemplates.cc:100
-#, c-format
-msgid "%s not a valid DEB package."
-msgstr "%s 並不是正確的 DEB 套件。"
-
-#: cmdline/apt-extracttemplates.cc:234
-msgid ""
-"Usage: apt-extracttemplates file1 [file2 ...]\n"
-"\n"
-"apt-extracttemplates is a tool to extract config and template info\n"
-"from debian packages\n"
-"\n"
-"Options:\n"
-" -h This help text\n"
-" -t Set the temp dir\n"
-" -c=? Read this configuration file\n"
-" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
-msgstr ""
-"用法：apt-extracttemplates 檔案1 [檔案2 ...]\n"
-"\n"
-"apt-extracttemplates 是用來從 debian 套件中解壓出設定檔和模板資訊\n"
-"的工具\n"
-"\n"
-"選項\n"
-" -h 本幫助訊息。\n"
-" -t 指定暫存目錄\n"
-" -c=? 讀取指定的設定檔\n"
-" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
-
-#: cmdline/apt-extracttemplates.cc:269 apt-pkg/pkgcachegen.cc:1271
-#, c-format
-msgid "Unable to write to %s"
-msgstr "無法寫入 %s"
-
-#: cmdline/apt-extracttemplates.cc:311
-msgid "Cannot get debconf version. Is debconf installed?"
-msgstr "無法取得 debconf 版本。是否有安裝 debconf？"
-
-#: ftparchive/apt-ftparchive.cc:171 ftparchive/apt-ftparchive.cc:348
-msgid "Package extension list is too long"
-msgstr "套件延伸列表過長"
-
-#: ftparchive/apt-ftparchive.cc:173 ftparchive/apt-ftparchive.cc:190
-#: ftparchive/apt-ftparchive.cc:213 ftparchive/apt-ftparchive.cc:263
-#: ftparchive/apt-ftparchive.cc:277 ftparchive/apt-ftparchive.cc:299
-#, c-format
-msgid "Error processing directory %s"
-msgstr "處理目錄 %s 時發生錯誤"
-
-#: ftparchive/apt-ftparchive.cc:261
-msgid "Source extension list is too long"
-msgstr "原始碼的延伸列表太長"
-
-#: ftparchive/apt-ftparchive.cc:378
-msgid "Error writing header to contents file"
-msgstr "寫入標頭資訊到內容檔時發生錯誤"
-
-#: ftparchive/apt-ftparchive.cc:408
-#, c-format
-msgid "Error processing contents %s"
-msgstr "處理內容 %s 時發生錯誤"
-
-#: ftparchive/apt-ftparchive.cc:596
-msgid ""
-"Usage: apt-ftparchive [options] command\n"
-"Commands: packages binarypath [overridefile [pathprefix]]\n"
-" sources srcpath [overridefile [pathprefix]]\n"
-" contents path\n"
-" release path\n"
-" generate config [groups]\n"
-" clean config\n"
-"\n"
-"apt-ftparchive generates index files for Debian archives. It supports\n"
-"many styles of generation from fully automated to functional replacements\n"
-"for dpkg-scanpackages and dpkg-scansources\n"
-"\n"
-"apt-ftparchive generates Package files from a tree of .debs. The\n"
-"Package file contains the contents of all the control fields from\n"
-"each package as well as the MD5 hash and filesize. An override file\n"
-"is supported to force the value of Priority and Section.\n"
-"\n"
-"Similarly apt-ftparchive generates Sources files from a tree of .dscs.\n"
-"The --source-override option can be used to specify a src override file\n"
-"\n"
-"The 'packages' and 'sources' command should be run in the root of the\n"
-"tree. BinaryPath should point to the base of the recursive search and \n"
-"override file should contain the override flags. Pathprefix is\n"
-"appended to the filename fields if present. Example usage from the \n"
-"Debian archive:\n"
-" apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n"
-" dists/potato/main/binary-i386/Packages\n"
-"\n"
-"Options:\n"
-" -h This help text\n"
-" --md5 Control MD5 generation\n"
-" -s=? Source override file\n"
-" -q Quiet\n"
-" -d=? Select the optional caching database\n"
-" --no-delink Enable delinking debug mode\n"
-" --contents Control contents file generation\n"
-" -c=? Read this configuration file\n"
-" -o=? Set an arbitrary configuration option"
-msgstr ""
-"用法：apt-ftparchive [選項] 指令\n"
-"指令：packages 二進制檔搜索路徑 [重新定義檔 [路徑前綴]]\n"
-" sources 原始碼搜索路徑 [重新定義檔 [路徑前綴]]\n"
-" contents 搜索路徑\n"
-" release 搜索路徑\n"
-" generate 設定檔 [群組]\n"
-" clean 設定檔\n"
-"\n"
-"apt-ftparchive 可用來替 Debian 套件庫建立索引檔。它支援了從全\n"
-"自動化到足以替代 dpkg-scanpackages 及 dpkg-scansources 所提供\n"
-"的所有功能等等各式各樣建立索引的方式。apt-ftparchive 會根據 .deb 檔案樹建立 "
-"Package 檔。Package 檔\n"
-"裡不僅包含了每個套件的 control 資料的內容，還包含了 MD5 檢驗\n"
-"碼和檔案大小。它還支援了重新定義檔，可用來強制指定優先等級及\n"
-"其所屬的類別。\n"
-"\n"
-"而同樣的，apt-ftparchive 也能根據 .dsc 檔案樹生成 Source 檔。\n"
-"可用 --source-override 選項來指定一個 src 重新定義檔。\n"
-"\n"
-"應當在檔案樹的根目錄下執行 'packages' 和 'source' 指令。\n"
-"二進制檔的搜索路徑必須指向遞迴搜索的底層，且在重新定義檔裡必\n"
-"須包含 override 旗標。若指定了路徑前綴時，則會被附加到檔案名\n"
-"稱這個欄位裡。以 Debian 套件庫為例:\n"
-" apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n"
-" dists/potato/main/binary-i386/Packages\n"
-"\n"
-"選項：\n"
-" -h 本幫助說明\n"
-" --md5 控制如何產生 MD5 檢驗碼\n"
-" -s=? 原始碼的重新定義檔\n"
-" -q 安靜模式\n"
-" -d=? 指定搭配的快取資料庫\n"
-" --no-delink 啟用 DeLinking 模式\n"
-" --contents 產生控制內容檔\n"
-" -c=? 讀取指定的設定檔\n"
-" -o=? 指定任意的設定選項"
-
-#: ftparchive/apt-ftparchive.cc:802
-msgid "No selections matched"
-msgstr "找不到符合的選項"
-
-#: ftparchive/apt-ftparchive.cc:880
-#, c-format
-msgid "Some files are missing in the package file group `%s'"
-msgstr "套件檔案組 `%s' 少了部份檔案"
-
-#: ftparchive/cachedb.cc:46
-#, c-format
-msgid "DB was corrupted, file renamed to %s.old"
-msgstr "DB 已損毀，檔案被更名為 %s.old"
-
-#: ftparchive/cachedb.cc:64
-#, c-format
-msgid "DB is old, attempting to upgrade %s"
-msgstr "DB 過舊，嘗試升級 %s"
-
-#: ftparchive/cachedb.cc:75
-#, fuzzy
-msgid ""
-"DB format is invalid. If you upgraded from an older version of apt, please "
-"remove and re-create the database."
-msgstr ""
-"資料庫格式不正確。如果您是由舊版的 apt 升級上來的，請移除並重新建立資料庫。"
-
-#: ftparchive/cachedb.cc:80
-#, c-format
-msgid "Unable to open DB file %s: %s"
-msgstr "無法開啟 DB 檔 %s: %s"
-
-#: ftparchive/cachedb.cc:126 apt-inst/extract.cc:181 apt-inst/extract.cc:193
-#: apt-inst/extract.cc:210 apt-inst/deb/dpkgdb.cc:121
-#, c-format
-msgid "Failed to stat %s"
-msgstr "無法取得 %s 的狀態"
-
-#: ftparchive/cachedb.cc:248
-msgid "Archive has no control record"
-msgstr "套件檔沒有 control 記錄"
-
-#: ftparchive/cachedb.cc:489
-msgid "Unable to get a cursor"
-msgstr "無法取得遊標"
-
-#: ftparchive/writer.cc:80
-#, c-format
-msgid "W: Unable to read directory %s\n"
-msgstr "警告：無法讀取目錄 %s\n"
-
-#: ftparchive/writer.cc:85
-#, c-format
-msgid "W: Unable to stat %s\n"
-msgstr "警告：無法取得 %s 狀態\n"
-
-#: ftparchive/writer.cc:141
-msgid "E: "
-msgstr "錯誤："
-
-#: ftparchive/writer.cc:143
-msgid "W: "
-msgstr "警告："
-
-#: ftparchive/writer.cc:150
-msgid "E: Errors apply to file "
-msgstr "錯誤：套用到檔案時發生錯誤"
-
-#: ftparchive/writer.cc:168 ftparchive/writer.cc:200
-#, c-format
-msgid "Failed to resolve %s"
-msgstr "無法解析 %s"
-
-#: ftparchive/writer.cc:181
-msgid "Tree walking failed"
-msgstr "無法走訪目錄樹"
-
-#: ftparchive/writer.cc:208
-#, c-format
-msgid "Failed to open %s"
-msgstr "無法開啟 %s"
-
-#: ftparchive/writer.cc:267
-#, c-format
-msgid " DeLink %s [%s]\n"
-msgstr " DeLink %s [%s]\n"
-
-#: ftparchive/writer.cc:275
-#, c-format
-msgid "Failed to readlink %s"
-msgstr "無法讀取連結 %s"
-
-#: ftparchive/writer.cc:279
-#, c-format
-msgid "Failed to unlink %s"
-msgstr "無法移除連結 %s"
-
-#: ftparchive/writer.cc:286
-#, c-format
-msgid "*** Failed to link %s to %s"
-msgstr "*** 無法將 %s 連結到 %s"
-
-#: ftparchive/writer.cc:296
-#, c-format
-msgid " DeLink limit of %sB hit.\n"
-msgstr " 達到了 DeLink 的上限 %sB。\n"
-
-#: ftparchive/writer.cc:401
-msgid "Archive had no package field"
-msgstr "套件檔裡沒有套件資訊"
-
-#: ftparchive/writer.cc:409 ftparchive/writer.cc:711
-#, c-format
-msgid " %s has no override entry\n"
-msgstr " %s 沒有重新定義項目\n"
-
-#: ftparchive/writer.cc:477 ftparchive/writer.cc:827
-#, c-format
-msgid " %s maintainer is %s not %s\n"
-msgstr " %s 的維護者是 %s，而非 %s\n"
-
-#: ftparchive/writer.cc:721
-#, c-format
-msgid " %s has no source override entry\n"
-msgstr " %s 沒有原始碼重新定義項目\n"
-
-#: ftparchive/writer.cc:725
-#, c-format
-msgid " %s has no binary override entry either\n"
-msgstr " %s 也沒有二元碼重新定義項目\n"
-
-#: ftparchive/contents.cc:339 ftparchive/contents.cc:370
-msgid "realloc - Failed to allocate memory"
-msgstr "realloc - 無法配置記憶體"
-
-#: ftparchive/override.cc:34 ftparchive/override.cc:142
-#, c-format
-msgid "Unable to open %s"
-msgstr "無法開啟 %s"
-
-#: ftparchive/override.cc:60 ftparchive/override.cc:166
-#, fuzzy, c-format
-msgid "Malformed override %s line %llu #1"
-msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #1"
-
-#: ftparchive/override.cc:74 ftparchive/override.cc:178
-#, fuzzy, c-format
-msgid "Malformed override %s line %llu #2"
-msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #2"
-
-#: ftparchive/override.cc:88 ftparchive/override.cc:191
-#, fuzzy, c-format
-msgid "Malformed override %s line %llu #3"
-msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #3"
-
-#: ftparchive/override.cc:127 ftparchive/override.cc:201
-#, c-format
-msgid "Failed to read the override file %s"
-msgstr "無法讀取重新定義檔 %s"
-
-#: ftparchive/multicompress.cc:70
-#, c-format
-msgid "Unknown compression algorithm '%s'"
-msgstr "未知的壓縮演算法 '%s'"
-
-#: ftparchive/multicompress.cc:100
-#, c-format
-msgid "Compressed output %s needs a compression set"
-msgstr "要壓縮輸出 %s 需搭配壓縮動作"
-
-#: ftparchive/multicompress.cc:168 methods/rsh.cc:97
-msgid "Failed to create IPC pipe to subprocess"
-msgstr "無法和子程序建立 IPC 管線"
-
-#: ftparchive/multicompress.cc:189
-msgid "Failed to create FILE*"
-msgstr "無法建立 FILE*"
-
-#: ftparchive/multicompress.cc:192
-msgid "Failed to fork"
-msgstr "fork 時失敗"
-
-#: ftparchive/multicompress.cc:206
-msgid "Compress child"
-msgstr "壓縮子程序"
-
-#: ftparchive/multicompress.cc:229
-#, c-format
-msgid "Internal error, failed to create %s"
-msgstr "內部錯誤，無法建立 %s"
-
-#: ftparchive/multicompress.cc:304
-msgid "IO to subprocess/file failed"
-msgstr "和子程序/檔案 IO 失敗"
-
-#: ftparchive/multicompress.cc:342
-msgid "Failed to read while computing MD5"
-msgstr "在計算 MD5 時無法讀取到資料"
-
-#: ftparchive/multicompress.cc:358
-#, c-format
-msgid "Problem unlinking %s"
-msgstr "在取消 %s 的連結時發生問題"
-
-#: ftparchive/multicompress.cc:373 apt-inst/extract.cc:188
-#, c-format
-msgid "Failed to rename %s to %s"
-msgstr "無法將 %s 更名為 %s"
-
#: cmdline/apt-get.cc:135
msgid "Y"
msgstr "Y"
msgid "N"
msgstr ""
-#: cmdline/apt-get.cc:162 apt-pkg/cachefilter.cc:31
+#: cmdline/apt-get.cc:162 apt-pkg/cachefilter.cc:33
#, c-format
msgid "Regex compilation error - %s"
msgstr "編譯正規表示式時發生錯誤 - %s"
-#: cmdline/apt-get.cc:257
+#: cmdline/apt-get.cc:260
msgid "The following packages have unmet dependencies:"
msgstr "下列的套件有未滿足的相依關係："
-#: cmdline/apt-get.cc:347
+#: cmdline/apt-get.cc:350
#, c-format
msgid "but %s is installed"
msgstr "但 %s 卻已安裝"
-#: cmdline/apt-get.cc:349
+#: cmdline/apt-get.cc:352
#, c-format
msgid "but %s is to be installed"
msgstr "但 %s 卻將被安裝"
-#: cmdline/apt-get.cc:356
+#: cmdline/apt-get.cc:359
msgid "but it is not installable"
msgstr "但它卻無法安裝"
-#: cmdline/apt-get.cc:358
+#: cmdline/apt-get.cc:361
msgid "but it is a virtual package"
msgstr "但它是虛擬套件"
-#: cmdline/apt-get.cc:361
+#: cmdline/apt-get.cc:364
msgid "but it is not installed"
msgstr "但它卻尚未安裝"
-#: cmdline/apt-get.cc:361
+#: cmdline/apt-get.cc:364
msgid "but it is not going to be installed"
msgstr "但它卻將不會被安裝"
-#: cmdline/apt-get.cc:366
+#: cmdline/apt-get.cc:369
msgid " or"
msgstr "或"
-#: cmdline/apt-get.cc:395
+#: cmdline/apt-get.cc:398
msgid "The following NEW packages will be installed:"
msgstr "下列【新】套件將會被安裝："
-#: cmdline/apt-get.cc:421
+#: cmdline/apt-get.cc:424
msgid "The following packages will be REMOVED:"
msgstr "下列套件將會被【移除】："
-#: cmdline/apt-get.cc:443
+#: cmdline/apt-get.cc:446
msgid "The following packages have been kept back:"
msgstr "下列套件將會維持其原有版本："
-#: cmdline/apt-get.cc:464
+#: cmdline/apt-get.cc:467
msgid "The following packages will be upgraded:"
msgstr "下列套件將會被升級："
-#: cmdline/apt-get.cc:485
+#: cmdline/apt-get.cc:488
msgid "The following packages will be DOWNGRADED:"
msgstr "下列套件將會被【降級】："
-#: cmdline/apt-get.cc:505
+#: cmdline/apt-get.cc:508
msgid "The following held packages will be changed:"
msgstr "下列被保留 (hold) 的套件將會被更改："
-#: cmdline/apt-get.cc:560
+#: cmdline/apt-get.cc:563
#, c-format
msgid "%s (due to %s) "
msgstr "%s（因為 %s）"
-#: cmdline/apt-get.cc:568
+#: cmdline/apt-get.cc:571
msgid ""
"WARNING: The following essential packages will be removed.\n"
"This should NOT be done unless you know exactly what you are doing!"
"【警告】：下列的基本套件都將被移除。\n"
"除非您很清楚您在做什麼，否則請勿輕易嘗試！"
-#: cmdline/apt-get.cc:599
+#: cmdline/apt-get.cc:602
#, c-format
msgid "%lu upgraded, %lu newly installed, "
msgstr "升級 %lu 個，新安裝 %lu 個，"
-#: cmdline/apt-get.cc:603
+#: cmdline/apt-get.cc:606
#, c-format
msgid "%lu reinstalled, "
msgstr "重新安裝 %lu 個，"
-#: cmdline/apt-get.cc:605
+#: cmdline/apt-get.cc:608
#, c-format
msgid "%lu downgraded, "
msgstr "降級 %lu 個，"
-#: cmdline/apt-get.cc:607
+#: cmdline/apt-get.cc:610
#, c-format
msgid "%lu to remove and %lu not upgraded.\n"
msgstr "移除 %lu 個，有 %lu 個未被升級。\n"
-#: cmdline/apt-get.cc:611
+#: cmdline/apt-get.cc:614
#, c-format
msgid "%lu not fully installed or removed.\n"
msgstr "%lu 個沒有完整得安裝或移除。\n"
-#: cmdline/apt-get.cc:632
+#: cmdline/apt-get.cc:635
#, fuzzy, c-format
msgid "Note, selecting '%s' for task '%s'\n"
msgstr "注意，根據正規表示式 '%2$s' 而選擇了 %1$s\n"
-#: cmdline/apt-get.cc:637
+#: cmdline/apt-get.cc:640
#, fuzzy, c-format
msgid "Note, selecting '%s' for regex '%s'\n"
msgstr "注意，根據正規表示式 '%2$s' 而選擇了 %1$s\n"
-#: cmdline/apt-get.cc:654
+#: cmdline/apt-get.cc:657
#, c-format
msgid "Package %s is a virtual package provided by:\n"
msgstr "套件 %s 是虛擬套件，提供者為：\n"
-#: cmdline/apt-get.cc:665
+#: cmdline/apt-get.cc:668
msgid " [Installed]"
msgstr "【已安裝】"
-#: cmdline/apt-get.cc:674
+#: cmdline/apt-get.cc:677
#, fuzzy
msgid " [Not candidate version]"
msgstr "候選版本"
-#: cmdline/apt-get.cc:676
+#: cmdline/apt-get.cc:679
msgid "You should explicitly select one to install."
msgstr "請您明確地選擇一個來進行安裝。"
-#: cmdline/apt-get.cc:679
+#: cmdline/apt-get.cc:682
#, c-format
msgid ""
"Package %s is not available, but is referred to by another package.\n"
"無法取得套件 %s，但它卻被其它的套件引用了。\n"
"這意味著這個套件可能已經消失了、被廢棄了，或是只能由其他的來源取得\n"
-#: cmdline/apt-get.cc:697
+#: cmdline/apt-get.cc:700
msgid "However the following packages replace it:"
msgstr "然而，下列的套件取代了它："
-#: cmdline/apt-get.cc:709
+#: cmdline/apt-get.cc:712
#, fuzzy, c-format
msgid "Package '%s' has no installation candidate"
msgstr "套件 %s 沒有可安裝的候選版本"
-#: cmdline/apt-get.cc:720
+#: cmdline/apt-get.cc:725
#, c-format
msgid "Virtual packages like '%s' can't be removed\n"
msgstr ""
-#: cmdline/apt-get.cc:764
+#. TRANSLATORS: Note, this is not an interactive question
+#: cmdline/apt-get.cc:737 cmdline/apt-get.cc:940
+#, fuzzy, c-format
+msgid "Package '%s' is not installed, so not removed. Did you mean '%s'?\n"
+msgstr "套件 %s 並沒有被安裝，所以也不會被移除\n"
+
+#: cmdline/apt-get.cc:743 cmdline/apt-get.cc:946
+#, fuzzy, c-format
+msgid "Package '%s' is not installed, so not removed\n"
+msgstr "套件 %s 並沒有被安裝，所以也不會被移除\n"
+
+#: cmdline/apt-get.cc:788
#, fuzzy, c-format
msgid "Note, selecting '%s' instead of '%s'\n"
msgstr "注意，選擇了以 %s 替代 %s\n"
-#: cmdline/apt-get.cc:794
+#: cmdline/apt-get.cc:818
#, c-format
msgid "Skipping %s, it is already installed and upgrade is not set.\n"
msgstr "忽略 %s，它已被安裝且沒有計劃要進行升級。\n"
-#: cmdline/apt-get.cc:798
+#: cmdline/apt-get.cc:822
#, fuzzy, c-format
msgid "Skipping %s, it is not installed and only upgrades are requested.\n"
msgstr "忽略 %s，它已被安裝且沒有計劃要進行升級。\n"
-#: cmdline/apt-get.cc:810
+#: cmdline/apt-get.cc:834
#, c-format
msgid "Reinstallation of %s is not possible, it cannot be downloaded.\n"
msgstr "無法重新安裝 %s，因為它無法下載。\n"
-#: cmdline/apt-get.cc:815
+#: cmdline/apt-get.cc:839
#, c-format
msgid "%s is already the newest version.\n"
msgstr "%s 已經是最新版本了。\n"
-#: cmdline/apt-get.cc:834 cmdline/apt-get.cc:2114 cmdline/apt-mark.cc:62
+#: cmdline/apt-get.cc:858 cmdline/apt-get.cc:2157 cmdline/apt-mark.cc:68
#, c-format
msgid "%s set to manually installed.\n"
msgstr "%s 被設定為手動安裝。\n"
-#: cmdline/apt-get.cc:860
+#: cmdline/apt-get.cc:884
#, fuzzy, c-format
msgid "Selected version '%s' (%s) for '%s'\n"
msgstr "選定的版本為 %3$s 的 %1$s (%2$s)\n"
-#: cmdline/apt-get.cc:865
+#: cmdline/apt-get.cc:889
#, fuzzy, c-format
msgid "Selected version '%s' (%s) for '%s' because of '%s'\n"
msgstr "選定的版本為 %3$s 的 %1$s (%2$s)\n"
-#: cmdline/apt-get.cc:907
-#, c-format
-msgid "Package %s is not installed, so not removed\n"
-msgstr "套件 %s 並沒有被安裝，所以也不會被移除\n"
-
-#: cmdline/apt-get.cc:985
+#: cmdline/apt-get.cc:1025
msgid "Correcting dependencies..."
msgstr "正在修正相依關係..."
-#: cmdline/apt-get.cc:988
+#: cmdline/apt-get.cc:1028
msgid " failed."
msgstr " 失敗。"
-#: cmdline/apt-get.cc:991
+#: cmdline/apt-get.cc:1031
msgid "Unable to correct dependencies"
msgstr "無法修正相依關係"
-#: cmdline/apt-get.cc:994
+#: cmdline/apt-get.cc:1034
msgid "Unable to minimize the upgrade set"
msgstr "無法將升級計劃最小化"
-#: cmdline/apt-get.cc:996
+#: cmdline/apt-get.cc:1036
msgid " Done"
msgstr " 完成"
-#: cmdline/apt-get.cc:1000
+#: cmdline/apt-get.cc:1040
msgid "You might want to run 'apt-get -f install' to correct these."
msgstr "您也許得執行 'apt-get -f install' 以修正這些問題。"
-#: cmdline/apt-get.cc:1003
+#: cmdline/apt-get.cc:1043
msgid "Unmet dependencies. Try using -f."
msgstr "未能滿足相依關係。試試 -f 選項。"
-#: cmdline/apt-get.cc:1028
+#: cmdline/apt-get.cc:1068
msgid "WARNING: The following packages cannot be authenticated!"
msgstr "【警告】：無法驗證下列套件！"
-#: cmdline/apt-get.cc:1032
+#: cmdline/apt-get.cc:1072
msgid "Authentication warning overridden.\n"
msgstr "忽略了驗證警告。\n"
-#: cmdline/apt-get.cc:1039
+#: cmdline/apt-get.cc:1079
msgid "Install these packages without verification [y/N]? "
msgstr "是否不經驗證就安裝這些套件？[y/N]"
-#: cmdline/apt-get.cc:1041
+#: cmdline/apt-get.cc:1081
msgid "Some packages could not be authenticated"
msgstr "有部份套件無法驗證"
-#: cmdline/apt-get.cc:1050 cmdline/apt-get.cc:1211
+#: cmdline/apt-get.cc:1090 cmdline/apt-get.cc:1251
msgid "There are problems and -y was used without --force-yes"
msgstr "發生了問題，且 -y 並沒有和 --force-yes 搭配使用"
-#: cmdline/apt-get.cc:1091
+#: cmdline/apt-get.cc:1131
msgid "Internal error, InstallPackages was called with broken packages!"
msgstr "內部錯誤，在損毀的套件上執行 InstallPackages！"
-#: cmdline/apt-get.cc:1100
+#: cmdline/apt-get.cc:1140
msgid "Packages need to be removed but remove is disabled."
msgstr "有套件需要被移除，但卻被禁止移除。"
-#: cmdline/apt-get.cc:1111
+#: cmdline/apt-get.cc:1151
msgid "Internal error, Ordering didn't finish"
msgstr "內部錯誤，排序未能完成"
-#: cmdline/apt-get.cc:1149
+#: cmdline/apt-get.cc:1189
msgid "How odd.. The sizes didn't match, email apt@packages.debian.org"
msgstr "怪哉... 檔案大小不符，請發信給 apt@packages.debian.org"
#. TRANSLATOR: The required space between number and unit is already included
#. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB
-#: cmdline/apt-get.cc:1156
+#: cmdline/apt-get.cc:1196
#, c-format
msgid "Need to get %sB/%sB of archives.\n"
msgstr "需要下載 %sB/%sB 的套件檔。\n"
#. TRANSLATOR: The required space between number and unit is already included
#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB
-#: cmdline/apt-get.cc:1161
+#: cmdline/apt-get.cc:1201
#, c-format
msgid "Need to get %sB of archives.\n"
msgstr "需要下載 %sB 的套件檔。\n"
#. TRANSLATOR: The required space between number and unit is already included
#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB
-#: cmdline/apt-get.cc:1168
+#: cmdline/apt-get.cc:1208
#, c-format
msgid "After this operation, %sB of additional disk space will be used.\n"
msgstr "此操作完成之後，會多佔用 %sB 的磁碟空間。\n"
#. TRANSLATOR: The required space between number and unit is already included
#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB
-#: cmdline/apt-get.cc:1173
+#: cmdline/apt-get.cc:1213
#, c-format
msgid "After this operation, %sB disk space will be freed.\n"
msgstr "此操作完成之後，會空出 %sB 的磁碟空間。\n"
-#: cmdline/apt-get.cc:1188 cmdline/apt-get.cc:1191 cmdline/apt-get.cc:2534
-#: cmdline/apt-get.cc:2537
+#: cmdline/apt-get.cc:1228 cmdline/apt-get.cc:1231 cmdline/apt-get.cc:2589
+#: cmdline/apt-get.cc:2592
#, c-format
msgid "Couldn't determine free space in %s"
msgstr "無法確認 %s 的未使用空間"
-#: cmdline/apt-get.cc:1201
+#: cmdline/apt-get.cc:1241
#, c-format
msgid "You don't have enough free space in %s."
msgstr "在 %s 裡沒有足夠的的未使用空間。"
-#: cmdline/apt-get.cc:1217 cmdline/apt-get.cc:1237
+#: cmdline/apt-get.cc:1257 cmdline/apt-get.cc:1277
msgid "Trivial Only specified but this is not a trivial operation."
msgstr "雖然指定了 Trivial Only（自動答 NO）選項，但這並不是 trivial 操作。"
-#: cmdline/apt-get.cc:1219
+#: cmdline/apt-get.cc:1259
msgid "Yes, do as I say!"
msgstr "Yes, do as I say!"
-#: cmdline/apt-get.cc:1221
+#: cmdline/apt-get.cc:1261
#, c-format
msgid ""
"You are about to do something potentially harmful.\n"
"請輸入 '%s' 這個句子以繼續進行\n"
" ?] "
-#: cmdline/apt-get.cc:1227 cmdline/apt-get.cc:1246
+#: cmdline/apt-get.cc:1267 cmdline/apt-get.cc:1286
msgid "Abort."
msgstr "放棄執行。"
-#: cmdline/apt-get.cc:1242
+#: cmdline/apt-get.cc:1282
msgid "Do you want to continue [Y/n]? "
msgstr "是否繼續進行 [Y/n]？"
-#: cmdline/apt-get.cc:1314 cmdline/apt-get.cc:2599 apt-pkg/algorithms.cc:1492
+#: cmdline/apt-get.cc:1354 cmdline/apt-get.cc:2654 apt-pkg/algorithms.cc:1543
#, c-format
msgid "Failed to fetch %s %s\n"
msgstr "無法取得 %s，%s\n"
-#: cmdline/apt-get.cc:1332
+#: cmdline/apt-get.cc:1372
msgid "Some files failed to download"
msgstr "有部份檔案無法下載"
-#: cmdline/apt-get.cc:1333 cmdline/apt-get.cc:2611
+#: cmdline/apt-get.cc:1373 cmdline/apt-get.cc:2666
msgid "Download complete and in download only mode"
msgstr "下載完成，且這是『僅下載』模式"
-#: cmdline/apt-get.cc:1339
+#: cmdline/apt-get.cc:1379
msgid ""
"Unable to fetch some archives, maybe run apt-get update or try with --fix-"
"missing?"
"有部份套件檔無法取得，試著執行 apt-get update 或者試著加上 --fix-missing 選"
"項？"
-#: cmdline/apt-get.cc:1343
+#: cmdline/apt-get.cc:1383
msgid "--fix-missing and media swapping is not currently supported"
msgstr "目前尚未支援 --fix-missing 和媒體抽換"
-#: cmdline/apt-get.cc:1348
+#: cmdline/apt-get.cc:1388
msgid "Unable to correct missing packages."
msgstr "無法修正欠缺的套件。"
-#: cmdline/apt-get.cc:1349
+#: cmdline/apt-get.cc:1389
msgid "Aborting install."
msgstr "放棄安裝。"
-#: cmdline/apt-get.cc:1377
+#: cmdline/apt-get.cc:1417
msgid ""
"The following package disappeared from your system as\n"
"all files have been overwritten by other packages:"
msgstr[0] ""
msgstr[1] ""
-#: cmdline/apt-get.cc:1381
-msgid "Note: This is done automatic and on purpose by dpkg."
+#: cmdline/apt-get.cc:1421
+msgid "Note: This is done automatically and on purpose by dpkg."
msgstr ""
-#: cmdline/apt-get.cc:1519
+#: cmdline/apt-get.cc:1559
#, c-format
msgid "Ignore unavailable target release '%s' of package '%s'"
msgstr ""
-#: cmdline/apt-get.cc:1551
+#: cmdline/apt-get.cc:1591
#, fuzzy, c-format
msgid "Picking '%s' as source package instead of '%s'\n"
msgstr "無法取得來源套件列表 %s 的狀態"
#. if (VerTag.empty() == false && Last == 0)
-#: cmdline/apt-get.cc:1589
+#: cmdline/apt-get.cc:1629
#, c-format
msgid "Ignore unavailable version '%s' of package '%s'"
msgstr ""
-#: cmdline/apt-get.cc:1605
+#: cmdline/apt-get.cc:1645
msgid "The update command takes no arguments"
msgstr "update 指令不需任何參數"
-#: cmdline/apt-get.cc:1668
+#: cmdline/apt-get.cc:1711
msgid "We are not supposed to delete stuff, can't start AutoRemover"
msgstr "我們沒有計劃要刪除任何東西，無法啟動 AutoRemover"
-#: cmdline/apt-get.cc:1772
+#: cmdline/apt-get.cc:1815
msgid ""
"Hmm, seems like the AutoRemover destroyed something which really\n"
"shouldn't happen. Please file a bug report against apt."
#. "that package should be filed.") << endl;
#. }
#.
-#: cmdline/apt-get.cc:1775 cmdline/apt-get.cc:1944
+#: cmdline/apt-get.cc:1818 cmdline/apt-get.cc:1987
msgid "The following information may help to resolve the situation:"
msgstr "以下的資訊或許有助於解決當前的情況："
-#: cmdline/apt-get.cc:1779
+#: cmdline/apt-get.cc:1822
msgid "Internal Error, AutoRemover broke stuff"
msgstr "內部錯誤，AutoRemover 處理失敗"
-#: cmdline/apt-get.cc:1786
+#: cmdline/apt-get.cc:1829
#, fuzzy
msgid ""
"The following package was automatically installed and is no longer required:"
msgstr[0] "以下套件是被自動安裝進來的，且已不再會被用到了："
msgstr[1] "以下套件是被自動安裝進來的，且已不再會被用到了："
-#: cmdline/apt-get.cc:1790
+#: cmdline/apt-get.cc:1833
#, fuzzy, c-format
msgid "%lu package was automatically installed and is no longer required.\n"
msgid_plural ""
msgstr[0] "以下套件是被自動安裝進來的，且已不再會被用到了："
msgstr[1] "以下套件是被自動安裝進來的，且已不再會被用到了："
-#: cmdline/apt-get.cc:1792
-msgid "Use 'apt-get autoremove' to remove them."
-msgstr "使用 'apt-get autoremove' 來將其移除。"
+#: cmdline/apt-get.cc:1835
+#, fuzzy
+msgid "Use 'apt-get autoremove' to remove it."
+msgid_plural "Use 'apt-get autoremove' to remove them."
+msgstr[0] "使用 'apt-get autoremove' 來將其移除。"
+msgstr[1] "使用 'apt-get autoremove' 來將其移除。"
-#: cmdline/apt-get.cc:1811
+#: cmdline/apt-get.cc:1854
msgid "Internal error, AllUpgrade broke stuff"
msgstr "內部錯誤，AllUpgrade 造成了損壞"
-#: cmdline/apt-get.cc:1910
+#: cmdline/apt-get.cc:1953
msgid "You might want to run 'apt-get -f install' to correct these:"
msgstr "您也許得執行 'apt-get -f install' 以修正這些問題："
-#: cmdline/apt-get.cc:1914
+#: cmdline/apt-get.cc:1957
msgid ""
"Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a "
"solution)."
"未能滿足相依關係。請試著不指定套件來執行 'apt-get -f install'（或採取其它的解"
"決方案）。"
-#: cmdline/apt-get.cc:1929
+#: cmdline/apt-get.cc:1972
msgid ""
"Some packages could not be installed. This may mean that you have\n"
"requested an impossible situation or if you are using the unstable\n"
"有些套件無法安裝。這可能意謂著您的要求難以解決，或是若您使用的是\n"
"unstable 發行版，可能有些必要的套件尚未建立，或是被移出 Incoming 了。"
-#: cmdline/apt-get.cc:1950
+#: cmdline/apt-get.cc:1993
msgid "Broken packages"
msgstr "損毀的套件"
-#: cmdline/apt-get.cc:1976
+#: cmdline/apt-get.cc:2019
msgid "The following extra packages will be installed:"
msgstr "下列的額外套件將被安裝："
-#: cmdline/apt-get.cc:2066
+#: cmdline/apt-get.cc:2109
msgid "Suggested packages:"
msgstr "建議套件："
-#: cmdline/apt-get.cc:2067
+#: cmdline/apt-get.cc:2110
msgid "Recommended packages:"
msgstr "推薦套件："
-#: cmdline/apt-get.cc:2109
+#: cmdline/apt-get.cc:2152
#, c-format
msgid "Couldn't find package %s"
msgstr "無法找到套件 %s"
-#: cmdline/apt-get.cc:2116 cmdline/apt-mark.cc:64
+#: cmdline/apt-get.cc:2159 cmdline/apt-mark.cc:70
#, fuzzy, c-format
msgid "%s set to automatically installed.\n"
msgstr "%s 被設定為手動安裝。\n"
-#: cmdline/apt-get.cc:2124 cmdline/apt-mark.cc:108
+#: cmdline/apt-get.cc:2167 cmdline/apt-mark.cc:114
msgid ""
"This command is deprecated. Please use 'apt-mark auto' and 'apt-mark manual' "
"instead."
msgstr ""
-#: cmdline/apt-get.cc:2140
+#: cmdline/apt-get.cc:2183
msgid "Calculating upgrade... "
msgstr "籌備升級中... "
-#: cmdline/apt-get.cc:2143 methods/ftp.cc:711 methods/connect.cc:115
+#: cmdline/apt-get.cc:2186 methods/ftp.cc:711 methods/connect.cc:115
msgid "Failed"
msgstr "失敗"
-#: cmdline/apt-get.cc:2148
+#: cmdline/apt-get.cc:2191
msgid "Done"
msgstr "完成"
-#: cmdline/apt-get.cc:2215 cmdline/apt-get.cc:2223
+#: cmdline/apt-get.cc:2258 cmdline/apt-get.cc:2266
msgid "Internal error, problem resolver broke stuff"
msgstr "內部錯誤，問題排除器造成了損壞"
-#: cmdline/apt-get.cc:2251 cmdline/apt-get.cc:2287
+#: cmdline/apt-get.cc:2294 cmdline/apt-get.cc:2330
msgid "Unable to lock the download directory"
msgstr "無法鎖定下載目錄"
-#: cmdline/apt-get.cc:2338
+#: cmdline/apt-get.cc:2386
+#, c-format
+msgid "Can't find a source to download version '%s' of '%s'"
+msgstr ""
+
+#: cmdline/apt-get.cc:2391
#, c-format
msgid "Downloading %s %s"
msgstr ""
-#: cmdline/apt-get.cc:2396
+#: cmdline/apt-get.cc:2451
msgid "Must specify at least one package to fetch source for"
msgstr "在取得原始碼時必須至少指定一個套件"
-#: cmdline/apt-get.cc:2436 cmdline/apt-get.cc:2748
+#: cmdline/apt-get.cc:2491 cmdline/apt-get.cc:2803
#, c-format
msgid "Unable to find a source package for %s"
msgstr "無法找到 %s 的原始碼套件"
-#: cmdline/apt-get.cc:2453
+#: cmdline/apt-get.cc:2508
#, c-format
msgid ""
"NOTICE: '%s' packaging is maintained in the '%s' version control system at:\n"
"%s\n"
msgstr ""
-#: cmdline/apt-get.cc:2458
+#: cmdline/apt-get.cc:2513
#, c-format
msgid ""
"Please use:\n"
-"bzr get %s\n"
+"bzr branch %s\n"
"to retrieve the latest (possibly unreleased) updates to the package.\n"
msgstr ""
-#: cmdline/apt-get.cc:2511
+#: cmdline/apt-get.cc:2566
#, c-format
msgid "Skipping already downloaded file '%s'\n"
msgstr "略過已下載的檔案 '%s'\n"
-#: cmdline/apt-get.cc:2548
+#: cmdline/apt-get.cc:2603
#, c-format
msgid "You don't have enough free space in %s"
msgstr "在 %s 裡沒有足夠的的未使用空間"
#. TRANSLATOR: The required space between number and unit is already included
#. in the replacement strings, so %sB will be correctly translate in e.g. 1,5 MB
-#: cmdline/apt-get.cc:2557
+#: cmdline/apt-get.cc:2612
#, c-format
msgid "Need to get %sB/%sB of source archives.\n"
msgstr "需要下載 %sB/%sB 的原始套件檔。\n"
#. TRANSLATOR: The required space between number and unit is already included
#. in the replacement string, so %sB will be correctly translate in e.g. 1,5 MB
-#: cmdline/apt-get.cc:2562
+#: cmdline/apt-get.cc:2617
#, c-format
msgid "Need to get %sB of source archives.\n"
msgstr "需要下載 %sB 的原始套件檔。\n"
-#: cmdline/apt-get.cc:2568
+#: cmdline/apt-get.cc:2623
#, c-format
msgid "Fetch source %s\n"
msgstr "取得原始碼 %s\n"
-#: cmdline/apt-get.cc:2606
+#: cmdline/apt-get.cc:2661
msgid "Failed to fetch some archives."
msgstr "無法取得某些套件檔。"
-#: cmdline/apt-get.cc:2637
+#: cmdline/apt-get.cc:2692
#, c-format
msgid "Skipping unpack of already unpacked source in %s\n"
msgstr "不解開，因原始碼已解開至 %s\n"
-#: cmdline/apt-get.cc:2649
+#: cmdline/apt-get.cc:2704
#, c-format
msgid "Unpack command '%s' failed.\n"
msgstr "解開指令 '%s' 失敗。\n"
-#: cmdline/apt-get.cc:2650
+#: cmdline/apt-get.cc:2705
#, c-format
msgid "Check if the 'dpkg-dev' package is installed.\n"
msgstr "請檢查是否已安裝了 'dpkg-dev' 套件。\n"
-#: cmdline/apt-get.cc:2672
+#: cmdline/apt-get.cc:2727
#, c-format
msgid "Build command '%s' failed.\n"
msgstr "編譯指令 '%s' 失敗。\n"
-#: cmdline/apt-get.cc:2692
+#: cmdline/apt-get.cc:2747
msgid "Child process failed"
msgstr "子程序失敗"
-#: cmdline/apt-get.cc:2711
+#: cmdline/apt-get.cc:2766
msgid "Must specify at least one package to check builddeps for"
msgstr "在檢查編譯相依關係時必須至少指定一個套件"
-#: cmdline/apt-get.cc:2736
+#: cmdline/apt-get.cc:2791
#, c-format
msgid ""
"No architecture information available for %s. See apt.conf(5) APT::"
"Architectures for setup"
msgstr ""
-#: cmdline/apt-get.cc:2753
+#: cmdline/apt-get.cc:2815 cmdline/apt-get.cc:2818
#, c-format
msgid "Unable to get build-dependency information for %s"
msgstr "無法取得 %s 的編譯相依關係資訊"
-#: cmdline/apt-get.cc:2773
+#: cmdline/apt-get.cc:2838
#, c-format
msgid "%s has no build depends.\n"
msgstr "%s 沒有編譯相依關係。\n"
-#: cmdline/apt-get.cc:2903
+#: cmdline/apt-get.cc:2997
#, fuzzy, c-format
msgid ""
"%s dependency for %s can't be satisfied because %s is not allowed on '%s' "
"packages"
msgstr "無法滿足 %2$s 所要求的 %1$s 相依關係，因為找不到套件 %3$s"
-#: cmdline/apt-get.cc:2924
+#: cmdline/apt-get.cc:3015
#, c-format
msgid ""
"%s dependency for %s cannot be satisfied because the package %s cannot be "
"found"
msgstr "無法滿足 %2$s 所要求的 %1$s 相依關係，因為找不到套件 %3$s"
-#: cmdline/apt-get.cc:2947
+#: cmdline/apt-get.cc:3038
#, c-format
msgid "Failed to satisfy %s dependency for %s: Installed package %s is too new"
msgstr "無法滿足 %2$s 的相依關係 %1$s：已安裝的套件 %3$s 太新了"
-#: cmdline/apt-get.cc:2986
+#: cmdline/apt-get.cc:3077
#, fuzzy, c-format
msgid ""
"%s dependency for %s cannot be satisfied because candidate version of "
msgstr ""
"無法滿足 %2$s 所要求的 %1$s 相依關係，因為套件 %3$s 沒有版本符合其版本需求"
-#: cmdline/apt-get.cc:2992
+#: cmdline/apt-get.cc:3083
#, fuzzy, c-format
msgid ""
"%s dependency for %s cannot be satisfied because package %s has no candidate "
"version"
msgstr "無法滿足 %2$s 所要求的 %1$s 相依關係，因為找不到套件 %3$s"
-#: cmdline/apt-get.cc:3015
+#: cmdline/apt-get.cc:3106
#, c-format
msgid "Failed to satisfy %s dependency for %s: %s"
msgstr "無法滿足 %2$s 的相依關係 %1$s：%3$s"
-#: cmdline/apt-get.cc:3031
+#: cmdline/apt-get.cc:3122
#, c-format
msgid "Build-dependencies for %s could not be satisfied."
msgstr "無法滿足套件 %s 的編譯相依關係。"
-#: cmdline/apt-get.cc:3036
+#: cmdline/apt-get.cc:3127
msgid "Failed to process build dependencies"
msgstr "無法處理編譯相依關係"
-#: cmdline/apt-get.cc:3129 cmdline/apt-get.cc:3141
+#: cmdline/apt-get.cc:3220 cmdline/apt-get.cc:3232
#, fuzzy, c-format
msgid "Changelog for %s (%s)"
msgstr "正和 %s (%s) 連線"
-#: cmdline/apt-get.cc:3260
+#: cmdline/apt-get.cc:3355
msgid "Supported modules:"
msgstr "已支援模組："
-#: cmdline/apt-get.cc:3301
+#: cmdline/apt-get.cc:3396
#, fuzzy
msgid ""
"Usage: apt-get [options] command\n"
"以取得更多資訊和選項。\n"
" 該 APT 有著超級牛力。\n"
-#: cmdline/apt-get.cc:3466
+#: cmdline/apt-get.cc:3561
msgid ""
"NOTE: This is only a simulation!\n"
" apt-get needs root privileges for real execution.\n"
" so don't depend on the relevance to the real current situation!"
msgstr ""
-#: cmdline/acqprogress.cc:59
+#: cmdline/acqprogress.cc:60
msgid "Hit "
msgstr "已有 "
-#: cmdline/acqprogress.cc:83
+#: cmdline/acqprogress.cc:84
msgid "Get:"
msgstr "下載:"
-#: cmdline/acqprogress.cc:114
+#: cmdline/acqprogress.cc:115
msgid "Ign "
msgstr "略過 "
-#: cmdline/acqprogress.cc:118
+#: cmdline/acqprogress.cc:119
msgid "Err "
msgstr "錯誤 "
-#: cmdline/acqprogress.cc:139
+#: cmdline/acqprogress.cc:140
#, c-format
msgid "Fetched %sB in %s (%sB/s)\n"
msgstr "取得 %sB 用了 %s (%sB/s)\n"
-#: cmdline/acqprogress.cc:229
+#: cmdline/acqprogress.cc:230
#, c-format
msgid " [Working]"
msgstr " [工作中]"
-#: cmdline/acqprogress.cc:285
+#: cmdline/acqprogress.cc:286
#, c-format
msgid ""
"Media change: please insert the disc labeled\n"
" '%s'\n"
"放入 '%s' 裝置，然後按 [Enter] 鍵\n"
-#: cmdline/apt-internal-solver.cc:36
-msgid ""
-"Usage: apt-internal-resolver\n"
-"\n"
-"apt-internal-resolver is an interface to use the current internal\n"
-"like an external resolver for the APT family for debugging or alike\n"
-"\n"
-"Options:\n"
-" -h This help text.\n"
-" -q Loggable output - no progress indicator\n"
-" -c=? Read this configuration file\n"
-" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
-"apt.conf(5) manual pages for more information and options.\n"
-" This APT has Super Cow Powers.\n"
-msgstr ""
-
-#: cmdline/apt-mark.cc:49
+#: cmdline/apt-mark.cc:55
#, fuzzy, c-format
msgid "%s can not be marked as it is not installed.\n"
msgstr "但它卻尚未安裝"
-#: cmdline/apt-mark.cc:55
+#: cmdline/apt-mark.cc:61
#, fuzzy, c-format
msgid "%s was already set to manually installed.\n"
msgstr "%s 被設定為手動安裝。\n"
-#: cmdline/apt-mark.cc:57
+#: cmdline/apt-mark.cc:63
#, fuzzy, c-format
msgid "%s was already set to automatically installed.\n"
msgstr "%s 被設定為手動安裝。\n"
-#: cmdline/apt-mark.cc:172
+#: cmdline/apt-mark.cc:228
#, fuzzy, c-format
msgid "%s was already set on hold.\n"
msgstr "%s 已經是最新版本了。\n"
-#: cmdline/apt-mark.cc:174
+#: cmdline/apt-mark.cc:230
#, fuzzy, c-format
msgid "%s was already not hold.\n"
msgstr "%s 已經是最新版本了。\n"
-#: cmdline/apt-mark.cc:188 cmdline/apt-mark.cc:210
+#: cmdline/apt-mark.cc:245 cmdline/apt-mark.cc:314
+#: apt-pkg/contrib/fileutl.cc:828 apt-pkg/deb/dpkgpm.cc:1002
+#, c-format
+msgid "Waited for %s but it wasn't there"
+msgstr "等待 %s 但是它並不存在"
+
+#: cmdline/apt-mark.cc:260 cmdline/apt-mark.cc:297
#, fuzzy, c-format
msgid "%s set on hold.\n"
msgstr "%s 被設定為手動安裝。\n"
-#: cmdline/apt-mark.cc:190 cmdline/apt-mark.cc:215
+#: cmdline/apt-mark.cc:262 cmdline/apt-mark.cc:302
#, fuzzy, c-format
msgid "Canceled hold on %s.\n"
msgstr "無法開啟 %s"
-#: cmdline/apt-mark.cc:223
+#: cmdline/apt-mark.cc:320
msgid "Executing dpkg failed. Are you root?"
msgstr ""
-#: cmdline/apt-mark.cc:271
+#: cmdline/apt-mark.cc:367
msgid ""
"Usage: apt-mark [options] {auto|manual} pkg1 [pkg2 ...]\n"
"\n"
"apt-mark is a simple command line interface for marking packages\n"
-"as manual or automatical installed. It can also list marks.\n"
+"as manually or automatically installed. It can also list marks.\n"
"\n"
"Commands:\n"
" auto - Mark the given packages as automatically installed\n"
"See the apt-mark(8) and apt.conf(5) manual pages for more information."
msgstr ""
-#: cmdline/apt-sortpkgs.cc:89
-msgid "Unknown package record!"
-msgstr "未知的套件記錄！"
+#: methods/cdrom.cc:203
+#, c-format
+msgid "Unable to read the cdrom database %s"
+msgstr "無法讀取光碟片資料庫 %s"
-#: cmdline/apt-sortpkgs.cc:153
+#: methods/cdrom.cc:212
msgid ""
-"Usage: apt-sortpkgs [options] file1 [file2 ...]\n"
-"\n"
-"apt-sortpkgs is a simple tool to sort package files. The -s option is used\n"
-"to indicate what kind of file it is.\n"
-"\n"
-"Options:\n"
-" -h This help text\n"
-" -s Use source file sorting\n"
-" -c=? Read this configuration file\n"
-" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+"Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update "
+"cannot be used to add new CD-ROMs"
msgstr ""
-"用法：apt-sortpkgs [選項] 檔案1 [檔案2 ...]\n"
-"\n"
-"apt-sortpkgs 是用來排序套件檔的簡單工具。-s 選項是用來指定它的檔案類型。\n"
-"\n"
-"選項：\n"
-" -h 本幫助訊息。\n"
-" -s 根據原始檔排序\n"
-" -c=? 讀取指定的設定檔\n"
-" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
+"請用 apt-cdrom 來讓 APT 能辨識這張光碟。apt-get update 是不能用來新增光碟的"
-#: dselect/install:32
-msgid "Bad default setting!"
-msgstr "錯誤的預設設定！"
+#: methods/cdrom.cc:222
+msgid "Wrong CD-ROM"
+msgstr "不正確的光碟"
-#: dselect/install:51 dselect/install:83 dselect/install:87 dselect/install:94
-#: dselect/install:105 dselect/update:45
-msgid "Press enter to continue."
-msgstr "請按 [Enter] 鍵以繼續進行。"
+#: methods/cdrom.cc:249
+#, c-format
+msgid "Unable to unmount the CD-ROM in %s, it may still be in use."
+msgstr "無法卸載 %s 裡的光碟片，或許它仍在使用中。"
-#: dselect/install:91
-msgid "Do you want to erase any previously downloaded .deb files?"
-msgstr "æ\82¨æ\83³ç§»é\99¤æ\89\80æ\9c\89å\85\88å\89\8dä¸\8bè¼\89ç\9a\84 .deb æª\94å\97\8eï¼\9f"
+#: methods/cdrom.cc:254
+msgid "Disk not found."
+msgstr "æ\89¾ä¸\8då\88°ç£\81ç¢\9fã\80\82"
-#: dselect/install:101
-#, fuzzy
-msgid "Some errors occurred while unpacking. Packages that were installed"
-msgstr "在解開套件時發生錯誤。我要準備設定"
+#: methods/cdrom.cc:262 methods/file.cc:82 methods/rsh.cc:273
+msgid "File not found"
+msgstr "找不到檔案"
-#: dselect/install:102
-#, fuzzy
-msgid "will be configured. This may result in duplicate errors"
-msgstr "套件已安裝過。這會造成重複錯誤"
+#: methods/copy.cc:46 methods/gzip.cc:105 methods/gzip.cc:114
+#: methods/rred.cc:512 methods/rred.cc:521
+msgid "Failed to stat"
+msgstr "無法取得狀態"
-#: dselect/install:103
-msgid "or errors caused by missing dependencies. This is OK, only the errors"
-msgstr "或是因為沒有相依關係而造成錯誤。那麼這個錯誤是無關緊要的"
+#: methods/copy.cc:83 methods/gzip.cc:111 methods/rred.cc:518
+msgid "Failed to set modification time"
+msgstr "無法設定修改時間"
+
+#: methods/file.cc:47
+msgid "Invalid URI, local URIS must not start with //"
+msgstr "不正確的 URI，本機 URI 不應以 // 開頭"
+
+#. Login must be before getpeername otherwise dante won't work.
+#: methods/ftp.cc:173
+msgid "Logging in"
+msgstr "登入中"
+
+#: methods/ftp.cc:179
+msgid "Unable to determine the peer name"
+msgstr "無法解析對方主機名稱"
+
+#: methods/ftp.cc:184
+msgid "Unable to determine the local name"
+msgstr "無法解析本機名稱"
+
+#: methods/ftp.cc:215 methods/ftp.cc:243
+#, c-format
+msgid "The server refused the connection and said: %s"
+msgstr "伺服器不接受連線，並回應：%s"
+
+#: methods/ftp.cc:221
+#, c-format
+msgid "USER failed, server said: %s"
+msgstr "USER 指令失敗，伺服器回應：%s"
+
+#: methods/ftp.cc:228
+#, c-format
+msgid "PASS failed, server said: %s"
+msgstr "PASS 指令失敗，伺服器回應：%s"
+
+#: methods/ftp.cc:248
+msgid ""
+"A proxy server was specified but no login script, Acquire::ftp::ProxyLogin "
+"is empty."
+msgstr ""
+"指定了代理伺服器，但沒有指定登入 script，Acquire::ftp::ProxyLogin 是空的。"
+
+#: methods/ftp.cc:276
+#, c-format
+msgid "Login script command '%s' failed, server said: %s"
+msgstr "登入 script 指令 '%s' 失敗，伺服器回應：%s"
+
+#: methods/ftp.cc:302
+#, c-format
+msgid "TYPE failed, server said: %s"
+msgstr "TYPE 指令失敗，伺服器回應：%s"
+
+#: methods/ftp.cc:340 methods/ftp.cc:451 methods/rsh.cc:192 methods/rsh.cc:235
+msgid "Connection timeout"
+msgstr "連線逾時"
+
+#: methods/ftp.cc:346
+msgid "Server closed the connection"
+msgstr "伺服器已關閉連線"
+
+#: methods/ftp.cc:349 methods/rsh.cc:199 apt-pkg/contrib/fileutl.cc:1254
+#: apt-pkg/contrib/fileutl.cc:1263 apt-pkg/contrib/fileutl.cc:1266
+msgid "Read error"
+msgstr "讀取錯誤"
+
+#: methods/ftp.cc:356 methods/rsh.cc:206
+msgid "A response overflowed the buffer."
+msgstr "回應超過緩衝區長度。"
+
+#: methods/ftp.cc:373 methods/ftp.cc:385
+msgid "Protocol corruption"
+msgstr "協定失敗"
+
+#: methods/ftp.cc:457 methods/rred.cc:238 methods/rsh.cc:241
+#: apt-pkg/contrib/fileutl.cc:1352 apt-pkg/contrib/fileutl.cc:1361
+#: apt-pkg/contrib/fileutl.cc:1364 apt-pkg/contrib/fileutl.cc:1390
+msgid "Write error"
+msgstr "寫入錯誤"
+
+#: methods/ftp.cc:696 methods/ftp.cc:702 methods/ftp.cc:737
+msgid "Could not create a socket"
+msgstr "無法建立 Socket"
+
+#: methods/ftp.cc:707
+msgid "Could not connect data socket, connection timed out"
+msgstr "無法和 data socket 連線，連線逾時"
-#: dselect/install:104
-msgid ""
-"above this message are important. Please fix them and run [I]nstall again"
-msgstr "以上的訊息相當重要。請修正它們並重新執行安裝[I]"
+#: methods/ftp.cc:713
+msgid "Could not connect passive socket."
+msgstr "無法和 passive socket 連線。"
-#: dselect/update:30
-msgid "Merging available information"
-msgstr "整合現有的資料"
+#: methods/ftp.cc:730
+msgid "getaddrinfo was unable to get a listening socket"
+msgstr "getaddrinfo 無法取得監聽 socket"
-#: apt-inst/contrib/extracttar.cc:117
-msgid "Failed to create pipes"
-msgstr "無法建立管線"
+#: methods/ftp.cc:744
+msgid "Could not bind a socket"
+msgstr "無法 bind 至 socket"
-#: apt-inst/contrib/extracttar.cc:144
-msgid "Failed to exec gzip "
-msgstr "無法執行 gzip"
+#: methods/ftp.cc:748
+msgid "Could not listen on the socket"
+msgstr "無法監聽 socket"
-#: apt-inst/contrib/extracttar.cc:181 apt-inst/contrib/extracttar.cc:211
-msgid "Corrupted archive"
-msgstr "損毀的套件檔"
+#: methods/ftp.cc:755
+msgid "Could not determine the socket's name"
+msgstr "無法解析 socket 名稱"
-#: apt-inst/contrib/extracttar.cc:196
-msgid "Tar checksum failed, archive corrupted"
-msgstr "Tar checksum 失敗，套件檔已損毀"
+#: methods/ftp.cc:787
+msgid "Unable to send PORT command"
+msgstr "無法送出 PORT 指令"
-#: apt-inst/contrib/extracttar.cc:303
+#: methods/ftp.cc:797
#, c-format
-msgid "Unknown TAR header type %u, member %s"
-msgstr "未知的 TAR 標頭類型 %u，成員 %s"
-
-#: apt-inst/contrib/arfile.cc:74
-msgid "Invalid archive signature"
-msgstr "無效的套件庫簽章"
+msgid "Unknown address family %u (AF_*)"
+msgstr "未知的地址家族 %u (AF_*)"
-#: apt-inst/contrib/arfile.cc:82
-msgid "Error reading archive member header"
-msgstr "讀取套件檔的成員標頭訊息時發生錯誤"
+#: methods/ftp.cc:806
+#, c-format
+msgid "EPRT failed, server said: %s"
+msgstr "EPRT 指令失敗，伺服器回應：%s"
-#: apt-inst/contrib/arfile.cc:94
-#, fuzzy, c-format
-msgid "Invalid archive member header %s"
-msgstr "無效的套件檔成員標頭"
+#: methods/ftp.cc:826
+msgid "Data socket connect timed out"
+msgstr "Data socket 連線逾時"
-#: apt-inst/contrib/arfile.cc:106
-msgid "Invalid archive member header"
-msgstr "ç\84¡æ\95\88ç\9a\84å¥\97件æª\94æ\88\90å\93¡æ¨\99é "
+#: methods/ftp.cc:833
+msgid "Unable to accept connection"
+msgstr "ç\84¡æ³\95æ\8e¥å\8f\97é\80£ç·\9a"
-#: apt-inst/contrib/arfile.cc:132
-msgid "Archive is too short"
-msgstr "套件檔過短"
+#: methods/ftp.cc:872 methods/http.cc:1035 methods/rsh.cc:311
+msgid "Problem hashing file"
+msgstr "有問題的雜湊檔"
-#: apt-inst/contrib/arfile.cc:136
-msgid "Failed to read the archive headers"
-msgstr "讀取套件檔標頭失敗"
+#: methods/ftp.cc:885
+#, c-format
+msgid "Unable to fetch file, server said '%s'"
+msgstr "無法取得檔案，伺服器回應 '%s'"
-#: apt-inst/filelist.cc:382
-msgid "DropNode called on still linked node"
-msgstr "DropNode 在還有連結結點時被呼叫"
+#: methods/ftp.cc:900 methods/rsh.cc:330
+msgid "Data socket timed out"
+msgstr "Data socket 連線逾時"
-#: apt-inst/filelist.cc:414
-msgid "Failed to locate the hash element!"
-msgstr "找不到雜湊元件！"
+#: methods/ftp.cc:930
+#, c-format
+msgid "Data transfer failed, server said '%s'"
+msgstr "資料傳輸失敗，伺服器回應 '%s'"
-#: apt-inst/filelist.cc:461
-msgid "Failed to allocate diversion"
-msgstr "在配置抽換資訊時失敗"
+#. Get the files information
+#: methods/ftp.cc:1007
+msgid "Query"
+msgstr "查詢"
-#: apt-inst/filelist.cc:466
-msgid "Internal error in AddDiversion"
-msgstr "在 AddDiversion 發生了內部錯誤"
+#: methods/ftp.cc:1119
+msgid "Unable to invoke "
+msgstr "無法 invoke "
-#: apt-inst/filelist.cc:479
+#: methods/connect.cc:75
#, c-format
-msgid "Trying to overwrite a diversion, %s -> %s and %s/%s"
-msgstr "試圖改寫抽換資訊，%s -> %s 和 %s/%s"
+msgid "Connecting to %s (%s)"
+msgstr "正和 %s (%s) 連線"
-#: apt-inst/filelist.cc:508
+#: methods/connect.cc:86
#, c-format
-msgid "Double add of diversion %s -> %s"
-msgstr "重複加入抽換資訊 %s -> %s"
+msgid "[IP: %s %s]"
+msgstr "[IP: %s %s]"
-#: apt-inst/filelist.cc:551
+#: methods/connect.cc:93
#, c-format
-msgid "Duplicate conf file %s/%s"
-msgstr "重複的設定檔 %s/%s"
+msgid "Could not create a socket for %s (f=%u t=%u p=%u)"
+msgstr "無法建立 socket 指向 %s (f=%u t=%u p=%u)"
-#: apt-inst/dirstream.cc:43 apt-inst/dirstream.cc:49 apt-inst/dirstream.cc:55
-#: apt-inst/dirstream.cc:50
+#: methods/connect.cc:99
#, c-format
-msgid "Failed to write file %s"
-msgstr "寫入檔案 %s 失敗"
+msgid "Cannot initiate the connection to %s:%s (%s)."
+msgstr "無法初始和 %s:%s (%s) 的連線。"
-#: apt-inst/dirstream.cc:100 apt-inst/dirstream.cc:108
-#: apt-inst/dirstream.cc:98 apt-inst/dirstream.cc:106
+#: methods/connect.cc:107
#, c-format
-msgid "Failed to close file %s"
-msgstr "關閉檔案 %s 失敗"
+msgid "Could not connect to %s:%s (%s), connection timed out"
+msgstr "無法和 %s:%s (%s) 連線，連線逾時"
-#: apt-inst/extract.cc:96 apt-inst/extract.cc:167
+#: methods/connect.cc:125
#, c-format
-msgid "The path %s is too long"
-msgstr "路徑 %s 過長"
+msgid "Could not connect to %s:%s (%s)."
+msgstr "無法和 %s:%s (%s) 連線。"
-#: apt-inst/extract.cc:127
+#. We say this mainly because the pause here is for the
+#. ssh connection that is still going
+#: methods/connect.cc:153 methods/rsh.cc:433
#, c-format
-msgid "Unpacking %s more than once"
-msgstr "解開 %s 超過一次"
+msgid "Connecting to %s"
+msgstr "正連線至 %s"
-#: apt-inst/extract.cc:137
+#: methods/connect.cc:172 methods/connect.cc:191
#, c-format
-msgid "The directory %s is diverted"
-msgstr "路徑 %s 已被抽換"
+msgid "Could not resolve '%s'"
+msgstr "無法解析 '%s'"
-#: apt-inst/extract.cc:147
+#: methods/connect.cc:197
#, c-format
-msgid "The package is trying to write to the diversion target %s/%s"
-msgstr "æ¤å¥\97件試å\9c\96寫è\87³æ\8a½æ\8f\9bå¾\8cç\9a\84ç\9b®æ¨\99 %s/%s"
+msgid "Temporary failure resolving '%s'"
+msgstr "æ\9a«æ\99\82ç\84¡æ³\95解æ\9e\90 '%s'"
-#: apt-inst/extract.cc:157 apt-inst/extract.cc:300
-msgid "The diversion path is too long"
-msgstr "要進行抽換的路徑過長"
+#: methods/connect.cc:200
+#, fuzzy, c-format
+msgid "Something wicked happened resolving '%s:%s' (%i - %s)"
+msgstr "在解析 '%s:%s' (%i) 時出了怪事"
-#: apt-inst/extract.cc:243
-#, c-format
-msgid "The directory %s is being replaced by a non-directory"
-msgstr "ç\9b®é\8c\84 %s å·²ç¶\93被é\9d\9eç\9b®é\8c\84ç\9a\84æª\94æ¡\88æ\89\80å\8f\96代"
+#: methods/connect.cc:247
+#, fuzzy, c-format
+msgid "Unable to connect to %s:%s:"
+msgstr "ç\84¡æ³\95é\80£ç·\9aè\87³ %s %sï¼\9a"
-#: apt-inst/extract.cc:283
-msgid "Failed to locate node in its hash bucket"
-msgstr "在雜湊表中找不到節點"
+#: methods/gpgv.cc:180
+msgid ""
+"Internal error: Good signature, but could not determine key fingerprint?!"
+msgstr "內部錯誤：簽章無誤，但卻無法辨識密鑰的指紋碼？！"
-#: apt-inst/extract.cc:287
-msgid "The path is too long"
-msgstr "è·¯å¾\91é\81\8eé\95·"
+#: methods/gpgv.cc:185
+msgid "At least one invalid signature was encountered."
+msgstr "è\87³å°\91ç\99¼ç\8f¾ä¸\80å\80\8bç\84¡æ\95\88ç\9a\84ç°½ç« ã\80\82"
-#: apt-inst/extract.cc:415
-#, c-format
-msgid "Overwrite package match with no version for %s"
-msgstr "以無版本的 %s 覆寫原始套件"
+#: methods/gpgv.cc:189
+#, fuzzy
+msgid "Could not execute 'gpgv' to verify signature (is gpgv installed?)"
+msgstr "無法執行 '%s' 來驗證簽章（gpgv 是否安裝了？）"
-#: apt-inst/extract.cc:432
-#, c-format
-msgid "File %s/%s overwrites the one in the package %s"
-msgstr "檔案 %s/%s 覆寫了套件 %s 中的相同檔案"
+#: methods/gpgv.cc:194
+msgid "Unknown error executing gpgv"
+msgstr "在執行 gpgv 時發生未知的錯誤"
+
+#: methods/gpgv.cc:228 methods/gpgv.cc:235
+msgid "The following signatures were invalid:\n"
+msgstr "以下簽名無效：\n"
+
+#: methods/gpgv.cc:242
+msgid ""
+"The following signatures couldn't be verified because the public key is not "
+"available:\n"
+msgstr "由於無法取得它們的公鑰，以下簽章無法進行驗證：\n"
+
+#: methods/gzip.cc:65
+msgid "Empty files can't be valid archives"
+msgstr ""
+
+#: methods/http.cc:394
+msgid "Waiting for headers"
+msgstr "等待標頭"
+
+#: methods/http.cc:544
+msgid "Bad header line"
+msgstr "標頭行錯誤"
+
+#: methods/http.cc:569 methods/http.cc:576
+msgid "The HTTP server sent an invalid reply header"
+msgstr "HTTP 伺服器傳送了一個無效的回覆標頭"
+
+#: methods/http.cc:606
+msgid "The HTTP server sent an invalid Content-Length header"
+msgstr "HTTP 伺服器傳送了一個無效的 Content-Length 標頭"
+
+#: methods/http.cc:621
+msgid "The HTTP server sent an invalid Content-Range header"
+msgstr "HTTP 伺服器傳送了一個無效的 Content-Range 標頭"
+
+#: methods/http.cc:623
+msgid "This HTTP server has broken range support"
+msgstr "這個 HTTP 伺服器的範圍支援有問題"
+
+#: methods/http.cc:647
+msgid "Unknown date format"
+msgstr "未知的資料格式"
+
+#: methods/http.cc:818
+msgid "Select failed"
+msgstr "選擇失敗"
+
+#: methods/http.cc:823
+msgid "Connection timed out"
+msgstr "連線逾時"
+
+#: methods/http.cc:846
+msgid "Error writing to output file"
+msgstr "在寫入輸出檔時發生錯誤"
+
+#: methods/http.cc:877
+msgid "Error writing to file"
+msgstr "在寫入檔案時發生錯誤"
+
+#: methods/http.cc:905
+msgid "Error writing to the file"
+msgstr "在寫入該檔時發生錯誤"
+
+#: methods/http.cc:919
+msgid "Error reading from server. Remote end closed connection"
+msgstr "在讀取伺服器時發生錯誤，遠端主機已關閉連線"
+
+#: methods/http.cc:921
+msgid "Error reading from server"
+msgstr "在讀取伺服器時發生錯誤"
+
+#: methods/http.cc:1194
+msgid "Bad header data"
+msgstr "錯誤的標頭資料"
+
+#: methods/http.cc:1211 methods/http.cc:1266
+msgid "Connection failed"
+msgstr "連線失敗"
+
+#: methods/http.cc:1358
+msgid "Internal error"
+msgstr "內部錯誤"
#. Only warn if there are no sources.list.d.
#. Only warn if there is no sources.list file.
-#: apt-inst/extract.cc:465 apt-pkg/contrib/cdromutl.cc:183
-#: apt-pkg/contrib/fileutl.cc:372 apt-pkg/sourcelist.cc:208
-#: apt-pkg/sourcelist.cc:214 apt-pkg/acquire.cc:456 apt-pkg/init.cc:108
+#: methods/mirror.cc:95 apt-inst/extract.cc:465
+#: apt-pkg/contrib/cdromutl.cc:183 apt-pkg/contrib/fileutl.cc:400
+#: apt-pkg/contrib/fileutl.cc:513 apt-pkg/sourcelist.cc:208
+#: apt-pkg/sourcelist.cc:214 apt-pkg/acquire.cc:485 apt-pkg/init.cc:108
#: apt-pkg/init.cc:116 apt-pkg/clean.cc:36 apt-pkg/policy.cc:359
-#: methods/mirror.cc:95
#, c-format
msgid "Unable to read %s"
msgstr "無法讀取 %s"
-#: apt-inst/extract.cc:492
-#, c-format
-msgid "Unable to stat %s"
-msgstr "無法取得 %s 的狀態"
-
-#: apt-inst/deb/dpkgdb.cc:55 apt-inst/deb/dpkgdb.cc:61
+#: methods/mirror.cc:101 methods/mirror.cc:130 apt-pkg/contrib/cdromutl.cc:179
+#: apt-pkg/contrib/cdromutl.cc:213 apt-pkg/acquire.cc:491
+#: apt-pkg/acquire.cc:516 apt-pkg/clean.cc:42 apt-pkg/clean.cc:60
+#: apt-pkg/clean.cc:122
#, c-format
-msgid "Failed to remove %s"
-msgstr "無法移除 %s"
-
-#: apt-inst/deb/dpkgdb.cc:110 apt-inst/deb/dpkgdb.cc:112
-#, c-format
-msgid "Unable to create %s"
-msgstr "無法建立 %s"
+msgid "Unable to change to %s"
+msgstr "無法切換至 %s"
-#: apt-inst/deb/dpkgdb.cc:118
+#. FIXME: fallback to a default mirror here instead
+#. and provide a config option to define that default
+#: methods/mirror.cc:280
#, c-format
-msgid "Failed to stat %sinfo"
-msgstr "無法取得 %sinfo 的狀態"
-
-#: apt-inst/deb/dpkgdb.cc:123
-msgid "The info and temp directories need to be on the same filesystem"
-msgstr "資料目錄與暫存目錄需位於同一檔案系統中"
+msgid "No mirror file '%s' found "
+msgstr ""
-#: apt-inst/deb/dpkgdb.cc:139 apt-pkg/pkgcachegen.cc:1170
-#: apt-pkg/pkgcachegen.cc:1274 apt-pkg/pkgcachegen.cc:1280
-#: apt-pkg/pkgcachegen.cc:1436
-msgid "Reading package lists"
-msgstr "正在讀取套件清單"
+#. FIXME: fallback to a default mirror here instead
+#. and provide a config option to define that default
+#: methods/mirror.cc:287
+#, fuzzy, c-format
+msgid "Can not read mirror file '%s'"
+msgstr "無法開啟檔案 %s"
-#: apt-inst/deb/dpkgdb.cc:180
+#: methods/mirror.cc:442
#, c-format
-msgid "Failed to change to the admin dir %sinfo"
-msgstr "無法切換至管理者目錄 %sinfo"
-
-#: apt-inst/deb/dpkgdb.cc:201 apt-inst/deb/dpkgdb.cc:355
-#: apt-inst/deb/dpkgdb.cc:448
-msgid "Internal error getting a package name"
-msgstr "內部錯誤，無法取得套件名稱"
-
-#: apt-inst/deb/dpkgdb.cc:205 apt-inst/deb/dpkgdb.cc:386
-msgid "Reading file listing"
-msgstr "正在讀取檔案清單"
+msgid "[Mirror: %s]"
+msgstr ""
-#: apt-inst/deb/dpkgdb.cc:216
+#: methods/rred.cc:491
#, c-format
msgid ""
-"Failed to open the list file '%sinfo/%s'. If you cannot restore this file "
-"then make it empty and immediately re-install the same version of the "
-"package!"
+"Could not patch %s with mmap and with file operation usage - the patch seems "
+"to be corrupt."
msgstr ""
-"無法開啟清單檔 %sinfo/%s。如果您無法將此檔案還原，請清除檔案內容，然後立即重"
-"新安裝同一版本的套件！"
-#: apt-inst/deb/dpkgdb.cc:229 apt-inst/deb/dpkgdb.cc:242
+#: methods/rred.cc:496
#, c-format
-msgid "Failed reading the list file %sinfo/%s"
-msgstr "無法讀取清單檔 %sinfo/%s"
+msgid ""
+"Could not patch %s with mmap (but no mmap specific fail) - the patch seems "
+"to be corrupt."
+msgstr ""
-#: apt-inst/deb/dpkgdb.cc:266
-msgid "Internal error getting a node"
-msgstr "內部錯誤，無法取得節點"
+#: methods/rsh.cc:99 ftparchive/multicompress.cc:168
+msgid "Failed to create IPC pipe to subprocess"
+msgstr "無法和子程序建立 IPC 管線"
-#: apt-inst/deb/dpkgdb.cc:309
-#, c-format
-msgid "Failed to open the diversions file %sdiversions"
-msgstr "讀取抽換檔 %sdiversions 失敗"
+#: methods/rsh.cc:338
+msgid "Connection closed prematurely"
+msgstr "連線突然終止"
-#: apt-inst/deb/dpkgdb.cc:324
-msgid "The diversion file is corrupted"
-msgstr "抽換檔已損壞"
+#: dselect/install:32
+msgid "Bad default setting!"
+msgstr "錯誤的預設設定！"
-#: apt-inst/deb/dpkgdb.cc:331 apt-inst/deb/dpkgdb.cc:336
-#: apt-inst/deb/dpkgdb.cc:341
-#, c-format
-msgid "Invalid line in the diversion file: %s"
-msgstr "在抽換檔中的這一行有誤：%s"
+#: dselect/install:51 dselect/install:83 dselect/install:87 dselect/install:94
+#: dselect/install:105 dselect/update:45
+msgid "Press enter to continue."
+msgstr "請按 [Enter] 鍵以繼續進行。"
-#: apt-inst/deb/dpkgdb.cc:362
-msgid "Internal error adding a diversion"
-msgstr "內部錯誤：在新增抽換資料時發生錯誤"
+#: dselect/install:91
+msgid "Do you want to erase any previously downloaded .deb files?"
+msgstr "您想移除所有先前下載的 .deb 檔嗎？"
-#: apt-inst/deb/dpkgdb.cc:383
-msgid "The pkg cache must be initialized first"
-msgstr "套件快取必須先初始化"
+#: dselect/install:101
+#, fuzzy
+msgid "Some errors occurred while unpacking. Packages that were installed"
+msgstr "在解開套件時發生錯誤。我要準備設定"
-#: apt-inst/deb/dpkgdb.cc:443
-#, c-format
-msgid "Failed to find a Package: header, offset %lu"
-msgstr "找不到套件：檔案標頭，位移 %lu"
+#: dselect/install:102
+#, fuzzy
+msgid "will be configured. This may result in duplicate errors"
+msgstr "套件已安裝過。這會造成重複錯誤"
-#: apt-inst/deb/dpkgdb.cc:465
-#, c-format
-msgid "Bad ConfFile section in the status file. Offset %lu"
-msgstr "在 status 檔中的 ConfFile 區段損壞。位移 %lu"
+#: dselect/install:103
+msgid "or errors caused by missing dependencies. This is OK, only the errors"
+msgstr "或是因為沒有相依關係而造成錯誤。那麼這個錯誤是無關緊要的"
-#: apt-inst/deb/dpkgdb.cc:470
-#, c-format
-msgid "Error parsing MD5. Offset %lu"
-msgstr "在解析 MD5 時發生錯誤。位移 %lu"
+#: dselect/install:104
+msgid ""
+"above this message are important. Please fix them and run [I]nstall again"
+msgstr "以上的訊息相當重要。請修正它們並重新執行安裝[I]"
-#: apt-inst/deb/debfile.cc:42 apt-inst/deb/debfile.cc:47
-#: apt-inst/deb/debfile.cc:41 apt-inst/deb/debfile.cc:46
-#, c-format
-msgid "This is not a valid DEB archive, missing '%s' member"
-msgstr "這是個不正確的 DEB 套件檔，沒有 '%s' 成員"
+#: dselect/update:30
+msgid "Merging available information"
+msgstr "整合現有的資料"
-#. FIXME: add data.tar.xz here - adding it now would require a Translation round for a very small gain
-#: apt-inst/deb/debfile.cc:56 apt-inst/deb/debfile.cc:55
+#: cmdline/apt-extracttemplates.cc:102
#, c-format
-msgid "This is not a valid DEB archive, it has no '%s', '%s' or '%s' member"
-msgstr "這是個不正確的 DEB 套件檔，沒有 '%s', '%s' 或 '%s' 成員"
+msgid "%s not a valid DEB package."
+msgstr "%s 並不是正確的 DEB 套件。"
+
+#: cmdline/apt-extracttemplates.cc:236
+msgid ""
+"Usage: apt-extracttemplates file1 [file2 ...]\n"
+"\n"
+"apt-extracttemplates is a tool to extract config and template info\n"
+"from debian packages\n"
+"\n"
+"Options:\n"
+" -h This help text\n"
+" -t Set the temp dir\n"
+" -c=? Read this configuration file\n"
+" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+msgstr ""
+"用法：apt-extracttemplates 檔案1 [檔案2 ...]\n"
+"\n"
+"apt-extracttemplates 是用來從 debian 套件中解壓出設定檔和模板資訊\n"
+"的工具\n"
+"\n"
+"選項\n"
+" -h 本幫助訊息。\n"
+" -t 指定暫存目錄\n"
+" -c=? 讀取指定的設定檔\n"
+" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
-#: apt-inst/deb/debfile.cc:116
+#: cmdline/apt-extracttemplates.cc:271 apt-pkg/pkgcachegen.cc:1277
#, c-format
-msgid "Couldn't change to %s"
-msgstr "無法切換至 %s"
+msgid "Unable to write to %s"
+msgstr "無法寫入 %s"
+
+#: cmdline/apt-extracttemplates.cc:313
+msgid "Cannot get debconf version. Is debconf installed?"
+msgstr "無法取得 debconf 版本。是否有安裝 debconf？"
+
+#: ftparchive/apt-ftparchive.cc:171 ftparchive/apt-ftparchive.cc:348
+msgid "Package extension list is too long"
+msgstr "套件延伸列表過長"
-#: apt-inst/deb/debfile.cc:157 apt-inst/deb/debfile.cc:120
+#: ftparchive/apt-ftparchive.cc:173 ftparchive/apt-ftparchive.cc:190
+#: ftparchive/apt-ftparchive.cc:213 ftparchive/apt-ftparchive.cc:263
+#: ftparchive/apt-ftparchive.cc:277 ftparchive/apt-ftparchive.cc:299
#, c-format
-msgid "Internal error, could not locate member %s"
-msgstr "內部錯誤，找不找到成員 %s"
+msgid "Error processing directory %s"
+msgstr "處理目錄 %s 時發生錯誤"
-#: apt-inst/deb/debfile.cc:192
-msgid "Failed to locate a valid control file"
-msgstr "找不到可用的 control 檔"
+#: ftparchive/apt-ftparchive.cc:261
+msgid "Source extension list is too long"
+msgstr "原始碼的延伸列表太長"
-#: apt-inst/deb/debfile.cc:277 apt-inst/deb/debfile.cc:214
-msgid "Unparsable control file"
-msgstr "無法分析的 control 檔"
+#: ftparchive/apt-ftparchive.cc:378
+msgid "Error writing header to contents file"
+msgstr "寫入標頭資訊到內容檔時發生錯誤"
-#: methods/bzip2.cc:63 methods/gzip.cc:54
-msgid "Empty files can't be valid archives"
+#: ftparchive/apt-ftparchive.cc:408
+#, c-format
+msgid "Error processing contents %s"
+msgstr "處理內容 %s 時發生錯誤"
+
+#: ftparchive/apt-ftparchive.cc:596
+msgid ""
+"Usage: apt-ftparchive [options] command\n"
+"Commands: packages binarypath [overridefile [pathprefix]]\n"
+" sources srcpath [overridefile [pathprefix]]\n"
+" contents path\n"
+" release path\n"
+" generate config [groups]\n"
+" clean config\n"
+"\n"
+"apt-ftparchive generates index files for Debian archives. It supports\n"
+"many styles of generation from fully automated to functional replacements\n"
+"for dpkg-scanpackages and dpkg-scansources\n"
+"\n"
+"apt-ftparchive generates Package files from a tree of .debs. The\n"
+"Package file contains the contents of all the control fields from\n"
+"each package as well as the MD5 hash and filesize. An override file\n"
+"is supported to force the value of Priority and Section.\n"
+"\n"
+"Similarly apt-ftparchive generates Sources files from a tree of .dscs.\n"
+"The --source-override option can be used to specify a src override file\n"
+"\n"
+"The 'packages' and 'sources' command should be run in the root of the\n"
+"tree. BinaryPath should point to the base of the recursive search and \n"
+"override file should contain the override flags. Pathprefix is\n"
+"appended to the filename fields if present. Example usage from the \n"
+"Debian archive:\n"
+" apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n"
+" dists/potato/main/binary-i386/Packages\n"
+"\n"
+"Options:\n"
+" -h This help text\n"
+" --md5 Control MD5 generation\n"
+" -s=? Source override file\n"
+" -q Quiet\n"
+" -d=? Select the optional caching database\n"
+" --no-delink Enable delinking debug mode\n"
+" --contents Control contents file generation\n"
+" -c=? Read this configuration file\n"
+" -o=? Set an arbitrary configuration option"
msgstr ""
+"用法：apt-ftparchive [選項] 指令\n"
+"指令：packages 二進制檔搜索路徑 [重新定義檔 [路徑前綴]]\n"
+" sources 原始碼搜索路徑 [重新定義檔 [路徑前綴]]\n"
+" contents 搜索路徑\n"
+" release 搜索路徑\n"
+" generate 設定檔 [群組]\n"
+" clean 設定檔\n"
+"\n"
+"apt-ftparchive 可用來替 Debian 套件庫建立索引檔。它支援了從全\n"
+"自動化到足以替代 dpkg-scanpackages 及 dpkg-scansources 所提供\n"
+"的所有功能等等各式各樣建立索引的方式。apt-ftparchive 會根據 .deb 檔案樹建立 "
+"Package 檔。Package 檔\n"
+"裡不僅包含了每個套件的 control 資料的內容，還包含了 MD5 檢驗\n"
+"碼和檔案大小。它還支援了重新定義檔，可用來強制指定優先等級及\n"
+"其所屬的類別。\n"
+"\n"
+"而同樣的，apt-ftparchive 也能根據 .dsc 檔案樹生成 Source 檔。\n"
+"可用 --source-override 選項來指定一個 src 重新定義檔。\n"
+"\n"
+"應當在檔案樹的根目錄下執行 'packages' 和 'source' 指令。\n"
+"二進制檔的搜索路徑必須指向遞迴搜索的底層，且在重新定義檔裡必\n"
+"須包含 override 旗標。若指定了路徑前綴時，則會被附加到檔案名\n"
+"稱這個欄位裡。以 Debian 套件庫為例:\n"
+" apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n"
+" dists/potato/main/binary-i386/Packages\n"
+"\n"
+"選項：\n"
+" -h 本幫助說明\n"
+" --md5 控制如何產生 MD5 檢驗碼\n"
+" -s=? 原始碼的重新定義檔\n"
+" -q 安靜模式\n"
+" -d=? 指定搭配的快取資料庫\n"
+" --no-delink 啟用 DeLinking 模式\n"
+" --contents 產生控制內容檔\n"
+" -c=? 讀取指定的設定檔\n"
+" -o=? 指定任意的設定選項"
-#: methods/bzip2.cc:67
-#, c-format
-msgid "Couldn't open pipe for %s"
-msgstr "無法開啟管線給 %s 使用"
+#: ftparchive/apt-ftparchive.cc:802
+msgid "No selections matched"
+msgstr "找不到符合的選項"
-#: methods/bzip2.cc:111
+#: ftparchive/apt-ftparchive.cc:880
#, c-format
-msgid "Read error from %s process"
-msgstr "由 %s 程序讀取錯誤"
-
-#: methods/bzip2.cc:143 methods/bzip2.cc:152 methods/copy.cc:46
-#: methods/gzip.cc:94 methods/gzip.cc:103 methods/rred.cc:493
-#: methods/rred.cc:502
-msgid "Failed to stat"
-msgstr "無法取得狀態"
+msgid "Some files are missing in the package file group `%s'"
+msgstr "套件檔案組 `%s' 少了部份檔案"
-#: methods/bzip2.cc:149 methods/copy.cc:83 methods/gzip.cc:100
-#: methods/rred.cc:499
-msgid "Failed to set modification time"
-msgstr "無法設定修改時間"
+#: ftparchive/cachedb.cc:47
+#, c-format
+msgid "DB was corrupted, file renamed to %s.old"
+msgstr "DB 已損毀，檔案被更名為 %s.old"
-#: methods/cdrom.cc:203
+#: ftparchive/cachedb.cc:65
#, c-format
-msgid "Unable to read the cdrom database %s"
-msgstr "無法讀取光碟片資料庫 %s"
+msgid "DB is old, attempting to upgrade %s"
+msgstr "DB 過舊，嘗試升級 %s"
-#: methods/cdrom.cc:212
+#: ftparchive/cachedb.cc:76
+#, fuzzy
msgid ""
-"Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update "
-"cannot be used to add new CD-ROMs"
+"DB format is invalid. If you upgraded from an older version of apt, please "
+"remove and re-create the database."
msgstr ""
-"è«\8bç\94¨ apt-cdrom ä¾\86è®\93 APT è\83½è¾¨è\98é\80\99å¼µå\85\89ç¢\9fã\80\82apt-get update æ\98¯ä¸\8dè\83½ç\94¨ä¾\86æ\96°å¢\9eå\85\89ç¢\9fç\9a\84"
+"è³\87æ\96\99åº«æ ¼å¼\8fä¸\8dæ£ç¢ºã\80\82å¦\82æ\9e\9cæ\82¨æ\98¯ç\94±è\88\8aç\89\88ç\9a\84 apt å\8d\87ç´\9aä¸\8aä¾\86ç\9a\84ï¼\8cè«\8b移é\99¤ä¸¦é\87\8dæ\96°å»ºç«\8bè³\87æ\96\99庫ã\80\82"
-#: methods/cdrom.cc:222
-msgid "Wrong CD-ROM"
-msgstr "不正確的光碟"
+#: ftparchive/cachedb.cc:81
+#, c-format
+msgid "Unable to open DB file %s: %s"
+msgstr "無法開啟 DB 檔 %s: %s"
-#: methods/cdrom.cc:249
+#: ftparchive/cachedb.cc:127 apt-inst/extract.cc:181 apt-inst/extract.cc:193
+#: apt-inst/extract.cc:210
#, c-format
-msgid "Unable to unmount the CD-ROM in %s, it may still be in use."
-msgstr "ç\84¡æ³\95å\8d¸è¼\89 %s 裡ç\9a\84å\85\89ç¢\9fç\89\87ï¼\8cæ\88\96許å®\83ä»\8då\9c¨ä½¿ç\94¨ä¸ã\80\82"
+msgid "Failed to stat %s"
+msgstr "ç\84¡æ³\95å\8f\96å¾\97 %s ç\9a\84ç\8b\80æ\85\8b"
-#: methods/cdrom.cc:254
-msgid "Disk not found."
-msgstr "找不到磁碟。"
+#: ftparchive/cachedb.cc:249
+msgid "Archive has no control record"
+msgstr "套件檔沒有 control 記錄"
-#: methods/cdrom.cc:262 methods/file.cc:82 methods/rsh.cc:271
-msgid "File not found"
-msgstr "找不到檔案"
+#: ftparchive/cachedb.cc:490
+msgid "Unable to get a cursor"
+msgstr "無法取得遊標"
-#: methods/file.cc:47
-msgid "Invalid URI, local URIS must not start with //"
-msgstr "不正確的 URI，本機 URI 不應以 // 開頭"
+#: ftparchive/writer.cc:80
+#, c-format
+msgid "W: Unable to read directory %s\n"
+msgstr "警告：無法讀取目錄 %s\n"
+
+#: ftparchive/writer.cc:85
+#, c-format
+msgid "W: Unable to stat %s\n"
+msgstr "警告：無法取得 %s 狀態\n"
-#. Login must be before getpeername otherwise dante won't work.
-#: methods/ftp.cc:172
-msgid "Logging in"
-msgstr "登入中"
+#: ftparchive/writer.cc:141
+msgid "E: "
+msgstr "錯誤："
-#: methods/ftp.cc:178
-msgid "Unable to determine the peer name"
-msgstr "無法解析對方主機名稱"
+#: ftparchive/writer.cc:143
+msgid "W: "
+msgstr "警告："
-#: methods/ftp.cc:183
-msgid "Unable to determine the local name"
-msgstr "無法解析本機名稱"
+#: ftparchive/writer.cc:150
+msgid "E: Errors apply to file "
+msgstr "錯誤：套用到檔案時發生錯誤"
-#: methods/ftp.cc:214 methods/ftp.cc:242
+#: ftparchive/writer.cc:168 ftparchive/writer.cc:200
#, c-format
-msgid "The server refused the connection and said: %s"
-msgstr "伺服器不接受連線，並回應：%s"
+msgid "Failed to resolve %s"
+msgstr "無法解析 %s"
-#: methods/ftp.cc:220
-#, c-format
-msgid "USER failed, server said: %s"
-msgstr "USER 指令失敗，伺服器回應：%s"
+#: ftparchive/writer.cc:181
+msgid "Tree walking failed"
+msgstr "無法走訪目錄樹"
-#: methods/ftp.cc:227
+#: ftparchive/writer.cc:208
#, c-format
-msgid "PASS failed, server said: %s"
-msgstr "PASS 指令失敗，伺服器回應：%s"
-
-#: methods/ftp.cc:247
-msgid ""
-"A proxy server was specified but no login script, Acquire::ftp::ProxyLogin "
-"is empty."
-msgstr ""
-"指定了代理伺服器，但沒有指定登入 script，Acquire::ftp::ProxyLogin 是空的。"
+msgid "Failed to open %s"
+msgstr "無法開啟 %s"
-#: methods/ftp.cc:275
+#: ftparchive/writer.cc:267
#, c-format
-msgid "Login script command '%s' failed, server said: %s"
-msgstr "登入 script 指令 '%s' 失敗，伺服器回應：%s"
+msgid " DeLink %s [%s]\n"
+msgstr " DeLink %s [%s]\n"
-#: methods/ftp.cc:301
+#: ftparchive/writer.cc:275
#, c-format
-msgid "TYPE failed, server said: %s"
-msgstr "TYPE 指令失敗，伺服器回應：%s"
+msgid "Failed to readlink %s"
+msgstr "無法讀取連結 %s"
-#: methods/ftp.cc:339 methods/ftp.cc:450 methods/rsh.cc:190 methods/rsh.cc:233
-msgid "Connection timeout"
-msgstr "連線逾時"
+#: ftparchive/writer.cc:279
+#, c-format
+msgid "Failed to unlink %s"
+msgstr "無法移除連結 %s"
-#: methods/ftp.cc:345
-msgid "Server closed the connection"
-msgstr "伺服器已關閉連線"
+#: ftparchive/writer.cc:286
+#, c-format
+msgid "*** Failed to link %s to %s"
+msgstr "*** 無法將 %s 連結到 %s"
-#: methods/ftp.cc:348 apt-pkg/contrib/fileutl.cc:1065 methods/rsh.cc:197
-msgid "Read error"
-msgstr "讀取錯誤"
+#: ftparchive/writer.cc:296
+#, c-format
+msgid " DeLink limit of %sB hit.\n"
+msgstr " 達到了 DeLink 的上限 %sB。\n"
-#: methods/ftp.cc:355 methods/rsh.cc:204
-msgid "A response overflowed the buffer."
-msgstr "å\9b\9eæ\87\89è¶\85é\81\8eç·©è¡\9då\8d\80é\95·åº¦ã\80\82"
+#: ftparchive/writer.cc:401
+msgid "Archive had no package field"
+msgstr "å¥\97件æª\94裡æ²\92æ\9c\89å¥\97件è³\87è¨\8a"
-#: methods/ftp.cc:372 methods/ftp.cc:384
-msgid "Protocol corruption"
-msgstr "協定失敗"
+#: ftparchive/writer.cc:409 ftparchive/writer.cc:711
+#, c-format
+msgid " %s has no override entry\n"
+msgstr " %s 沒有重新定義項目\n"
-#: methods/ftp.cc:456 apt-pkg/contrib/fileutl.cc:1139 methods/rsh.cc:239
-msgid "Write error"
-msgstr "寫入錯誤"
+#: ftparchive/writer.cc:477 ftparchive/writer.cc:827
+#, c-format
+msgid " %s maintainer is %s not %s\n"
+msgstr " %s 的維護者是 %s，而非 %s\n"
-#: methods/ftp.cc:696 methods/ftp.cc:702 methods/ftp.cc:738
-msgid "Could not create a socket"
-msgstr "無法建立 Socket"
+#: ftparchive/writer.cc:721
+#, c-format
+msgid " %s has no source override entry\n"
+msgstr " %s 沒有原始碼重新定義項目\n"
-#: methods/ftp.cc:707
-msgid "Could not connect data socket, connection timed out"
-msgstr "無法和 data socket 連線，連線逾時"
+#: ftparchive/writer.cc:725
+#, c-format
+msgid " %s has no binary override entry either\n"
+msgstr " %s 也沒有二元碼重新定義項目\n"
-#: methods/ftp.cc:713
-msgid "Could not connect passive socket."
-msgstr "無法和 passive socket 連線。"
+#: ftparchive/contents.cc:341 ftparchive/contents.cc:372
+msgid "realloc - Failed to allocate memory"
+msgstr "realloc - 無法配置記憶體"
-#: methods/ftp.cc:731
-msgid "getaddrinfo was unable to get a listening socket"
-msgstr "getaddrinfo 無法取得監聽 socket"
+#: ftparchive/override.cc:35 ftparchive/override.cc:143
+#, c-format
+msgid "Unable to open %s"
+msgstr "無法開啟 %s"
-#: methods/ftp.cc:745
-msgid "Could not bind a socket"
-msgstr "無法 bind 至 socket"
+#: ftparchive/override.cc:61 ftparchive/override.cc:167
+#, fuzzy, c-format
+msgid "Malformed override %s line %llu #1"
+msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #1"
-#: methods/ftp.cc:749
-msgid "Could not listen on the socket"
-msgstr "無法監聽 socket"
+#: ftparchive/override.cc:75 ftparchive/override.cc:179
+#, fuzzy, c-format
+msgid "Malformed override %s line %llu #2"
+msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #2"
-#: methods/ftp.cc:756
-msgid "Could not determine the socket's name"
-msgstr "無法解析 socket 名稱"
+#: ftparchive/override.cc:89 ftparchive/override.cc:192
+#, fuzzy, c-format
+msgid "Malformed override %s line %llu #3"
+msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #3"
-#: methods/ftp.cc:788
-msgid "Unable to send PORT command"
-msgstr "無法送出 PORT 指令"
+#: ftparchive/override.cc:128 ftparchive/override.cc:202
+#, c-format
+msgid "Failed to read the override file %s"
+msgstr "無法讀取重新定義檔 %s"
-#: methods/ftp.cc:798
+#: ftparchive/multicompress.cc:70
#, c-format
-msgid "Unknown address family %u (AF_*)"
-msgstr "æ\9cªç\9f¥ç\9a\84å\9c°å\9d\80家æ\97\8f %u (AF_*)"
+msgid "Unknown compression algorithm '%s'"
+msgstr "æ\9cªç\9f¥ç\9a\84å£\93縮æ¼\94ç®\97æ³\95 '%s'"
-#: methods/ftp.cc:807
+#: ftparchive/multicompress.cc:100
#, c-format
-msgid "EPRT failed, server said: %s"
-msgstr "EPRT 指令失敗，伺服器回應：%s"
+msgid "Compressed output %s needs a compression set"
+msgstr "要壓縮輸出 %s 需搭配壓縮動作"
-#: methods/ftp.cc:827
-msgid "Data socket connect timed out"
-msgstr "Data socket 連線逾時"
+#: ftparchive/multicompress.cc:189
+msgid "Failed to create FILE*"
+msgstr "無法建立 FILE*"
-#: methods/ftp.cc:834
-msgid "Unable to accept connection"
-msgstr "無法接受連線"
+#: ftparchive/multicompress.cc:192
+msgid "Failed to fork"
+msgstr "fork 時失敗"
-#: methods/ftp.cc:873 methods/http.cc:1022 methods/rsh.cc:309
-msgid "Problem hashing file"
-msgstr "有問題的雜湊檔"
+#: ftparchive/multicompress.cc:206
+msgid "Compress child"
+msgstr "壓縮子程序"
-#: methods/ftp.cc:886
+#: ftparchive/multicompress.cc:229
#, c-format
-msgid "Unable to fetch file, server said '%s'"
-msgstr "無法取得檔案，伺服器回應 '%s'"
+msgid "Internal error, failed to create %s"
+msgstr "內部錯誤，無法建立 %s"
-#: methods/ftp.cc:901 methods/rsh.cc:328
-msgid "Data socket timed out"
-msgstr "Data socket 連線逾時"
+#: ftparchive/multicompress.cc:304
+msgid "IO to subprocess/file failed"
+msgstr "和子程序/檔案 IO 失敗"
+
+#: ftparchive/multicompress.cc:342
+msgid "Failed to read while computing MD5"
+msgstr "在計算 MD5 時無法讀取到資料"
-#: methods/ftp.cc:931
+#: ftparchive/multicompress.cc:358
#, c-format
-msgid "Data transfer failed, server said '%s'"
-msgstr "資料傳輸失敗，伺服器回應 '%s'"
+msgid "Problem unlinking %s"
+msgstr "在取消 %s 的連結時發生問題"
-#. Get the files information
-#: methods/ftp.cc:1008
-msgid "Query"
-msgstr "查詢"
+#: ftparchive/multicompress.cc:373 apt-inst/extract.cc:188
+#, c-format
+msgid "Failed to rename %s to %s"
+msgstr "無法將 %s 更名為 %s"
-#: methods/ftp.cc:1120
-msgid "Unable to invoke "
-msgstr "無法 invoke "
+#: cmdline/apt-internal-solver.cc:37
+#, fuzzy
+msgid ""
+"Usage: apt-internal-solver\n"
+"\n"
+"apt-internal-solver is an interface to use the current internal\n"
+"like an external resolver for the APT family for debugging or alike\n"
+"\n"
+"Options:\n"
+" -h This help text.\n"
+" -q Loggable output - no progress indicator\n"
+" -c=? Read this configuration file\n"
+" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+msgstr ""
+"用法：apt-extracttemplates 檔案1 [檔案2 ...]\n"
+"\n"
+"apt-extracttemplates 是用來從 debian 套件中解壓出設定檔和模板資訊\n"
+"的工具\n"
+"\n"
+"選項\n"
+" -h 本幫助訊息。\n"
+" -t 指定暫存目錄\n"
+" -c=? 讀取指定的設定檔\n"
+" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
-#: methods/connect.cc:75
-#, c-format
-msgid "Connecting to %s (%s)"
-msgstr "正和 %s (%s) 連線"
+#: cmdline/apt-sortpkgs.cc:89
+msgid "Unknown package record!"
+msgstr "未知的套件記錄！"
-#: methods/connect.cc:86
-#, c-format
-msgid "[IP: %s %s]"
-msgstr "[IP: %s %s]"
+#: cmdline/apt-sortpkgs.cc:153
+msgid ""
+"Usage: apt-sortpkgs [options] file1 [file2 ...]\n"
+"\n"
+"apt-sortpkgs is a simple tool to sort package files. The -s option is used\n"
+"to indicate what kind of file it is.\n"
+"\n"
+"Options:\n"
+" -h This help text\n"
+" -s Use source file sorting\n"
+" -c=? Read this configuration file\n"
+" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+msgstr ""
+"用法：apt-sortpkgs [選項] 檔案1 [檔案2 ...]\n"
+"\n"
+"apt-sortpkgs 是用來排序套件檔的簡單工具。-s 選項是用來指定它的檔案類型。\n"
+"\n"
+"選項：\n"
+" -h 本幫助訊息。\n"
+" -s 根據原始檔排序\n"
+" -c=? 讀取指定的設定檔\n"
+" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
-#: methods/connect.cc:93
-#, c-format
-msgid "Could not create a socket for %s (f=%u t=%u p=%u)"
-msgstr "無法建立 socket 指向 %s (f=%u t=%u p=%u)"
+#: apt-inst/contrib/extracttar.cc:117
+msgid "Failed to create pipes"
+msgstr "無法建立管線"
-#: methods/connect.cc:99
-#, c-format
-msgid "Cannot initiate the connection to %s:%s (%s)."
-msgstr "無法初始和 %s:%s (%s) 的連線。"
+#: apt-inst/contrib/extracttar.cc:144
+msgid "Failed to exec gzip "
+msgstr "無法執行 gzip"
-#: methods/connect.cc:107
-#, c-format
-msgid "Could not connect to %s:%s (%s), connection timed out"
-msgstr "無法和 %s:%s (%s) 連線，連線逾時"
+#: apt-inst/contrib/extracttar.cc:181 apt-inst/contrib/extracttar.cc:211
+msgid "Corrupted archive"
+msgstr "損毀的套件檔"
-#: methods/connect.cc:125
-#, c-format
-msgid "Could not connect to %s:%s (%s)."
-msgstr "無法和 %s:%s (%s) 連線。"
+#: apt-inst/contrib/extracttar.cc:196
+msgid "Tar checksum failed, archive corrupted"
+msgstr "Tar checksum 失敗，套件檔已損毀"
-#. We say this mainly because the pause here is for the
-#. ssh connection that is still going
-#: methods/connect.cc:153 methods/rsh.cc:431
+#: apt-inst/contrib/extracttar.cc:303
#, c-format
-msgid "Connecting to %s"
-msgstr "æ£é\80£ç·\9aè\87³ %s"
+msgid "Unknown TAR header type %u, member %s"
+msgstr "æ\9cªç\9f¥ç\9a\84 TAR æ¨\99é é¡\9eå\9e\8b %uï¼\8cæ\88\90å\93¡ %s"
-#: methods/connect.cc:172 methods/connect.cc:191
-#, c-format
-msgid "Could not resolve '%s'"
-msgstr "無法解析 '%s'"
+#: apt-inst/contrib/arfile.cc:74
+msgid "Invalid archive signature"
+msgstr "無效的套件庫簽章"
-#: methods/connect.cc:197
-#, c-format
-msgid "Temporary failure resolving '%s'"
-msgstr "暫時無法解析 '%s'"
+#: apt-inst/contrib/arfile.cc:82
+msgid "Error reading archive member header"
+msgstr "讀取套件檔的成員標頭訊息時發生錯誤"
-#: methods/connect.cc:200
+#: apt-inst/contrib/arfile.cc:94
#, fuzzy, c-format
-msgid "Something wicked happened resolving '%s:%s' (%i - %s)"
-msgstr "在解析 '%s:%s' (%i) 時出了怪事"
+msgid "Invalid archive member header %s"
+msgstr "無效的套件檔成員標頭"
-#: methods/connect.cc:247
-#, fuzzy, c-format
-msgid "Unable to connect to %s:%s:"
-msgstr "無法連線至 %s %s："
+#: apt-inst/contrib/arfile.cc:106
+msgid "Invalid archive member header"
+msgstr "無效的套件檔成員標頭"
-#: methods/gpgv.cc:172
-msgid ""
-"Internal error: Good signature, but could not determine key fingerprint?!"
-msgstr "內部錯誤：簽章無誤，但卻無法辨識密鑰的指紋碼？！"
+#: apt-inst/contrib/arfile.cc:132
+msgid "Archive is too short"
+msgstr "套件檔過短"
-#: methods/gpgv.cc:177
-msgid "At least one invalid signature was encountered."
-msgstr "è\87³å°\91ç\99¼ç\8f¾ä¸\80å\80\8bç\84¡æ\95\88ç\9a\84ç°½ç« ã\80\82"
+#: apt-inst/contrib/arfile.cc:136
+msgid "Failed to read the archive headers"
+msgstr "è®\80å\8f\96å¥\97件æª\94æ¨\99é 失æ\95\97"
-#: methods/gpgv.cc:181
-#, fuzzy
-msgid "Could not execute 'gpgv' to verify signature (is gpgv installed?)"
-msgstr "無法執行 '%s' 來驗證簽章（gpgv 是否安裝了？）"
+#: apt-inst/filelist.cc:382
+msgid "DropNode called on still linked node"
+msgstr "DropNode 在還有連結結點時被呼叫"
-#: methods/gpgv.cc:186
-msgid "Unknown error executing gpgv"
-msgstr "在執行 gpgv 時發生未知的錯誤"
+#: apt-inst/filelist.cc:414
+msgid "Failed to locate the hash element!"
+msgstr "找不到雜湊元件！"
-#: methods/gpgv.cc:220 methods/gpgv.cc:227
-msgid "The following signatures were invalid:\n"
-msgstr "以下簽名無效：\n"
+#: apt-inst/filelist.cc:461
+msgid "Failed to allocate diversion"
+msgstr "在配置抽換資訊時失敗"
-#: methods/gpgv.cc:234
-msgid ""
-"The following signatures couldn't be verified because the public key is not "
-"available:\n"
-msgstr "由於無法取得它們的公鑰，以下簽章無法進行驗證：\n"
+#: apt-inst/filelist.cc:466
+msgid "Internal error in AddDiversion"
+msgstr "在 AddDiversion 發生了內部錯誤"
-#: methods/http.cc:393
-msgid "Waiting for headers"
-msgstr "等待標頭"
+#: apt-inst/filelist.cc:479
+#, c-format
+msgid "Trying to overwrite a diversion, %s -> %s and %s/%s"
+msgstr "試圖改寫抽換資訊，%s -> %s 和 %s/%s"
-#: methods/http.cc:539
+#: apt-inst/filelist.cc:508
#, c-format
-msgid "Got a single header line over %u chars"
-msgstr "取得一個單行超過 %u 字元的標頭"
+msgid "Double add of diversion %s -> %s"
+msgstr "重複加入抽換資訊 %s -> %s"
-#: methods/http.cc:547
-msgid "Bad header line"
-msgstr "標頭行錯誤"
+#: apt-inst/filelist.cc:551
+#, c-format
+msgid "Duplicate conf file %s/%s"
+msgstr "重複的設定檔 %s/%s"
-#: methods/http.cc:572 methods/http.cc:579
-msgid "The HTTP server sent an invalid reply header"
-msgstr "HTTP 伺服器傳送了一個無效的回覆標頭"
+#: apt-inst/dirstream.cc:43 apt-inst/dirstream.cc:50 apt-inst/dirstream.cc:55
+#, c-format
+msgid "Failed to write file %s"
+msgstr "寫入檔案 %s 失敗"
-#: methods/http.cc:608
-msgid "The HTTP server sent an invalid Content-Length header"
-msgstr "HTTP 伺服器傳送了一個無效的 Content-Length 標頭"
+#: apt-inst/dirstream.cc:98 apt-inst/dirstream.cc:106
+#, c-format
+msgid "Failed to close file %s"
+msgstr "關閉檔案 %s 失敗"
-#: methods/http.cc:623
-msgid "The HTTP server sent an invalid Content-Range header"
-msgstr "HTTP 伺服器傳送了一個無效的 Content-Range 標頭"
+#: apt-inst/extract.cc:96 apt-inst/extract.cc:167
+#, c-format
+msgid "The path %s is too long"
+msgstr "路徑 %s 過長"
-#: methods/http.cc:625
-msgid "This HTTP server has broken range support"
-msgstr "這個 HTTP 伺服器的範圍支援有問題"
+#: apt-inst/extract.cc:127
+#, c-format
+msgid "Unpacking %s more than once"
+msgstr "解開 %s 超過一次"
-#: methods/http.cc:649
-msgid "Unknown date format"
-msgstr "未知的資料格式"
+#: apt-inst/extract.cc:137
+#, c-format
+msgid "The directory %s is diverted"
+msgstr "路徑 %s 已被抽換"
-#: methods/http.cc:808
-msgid "Select failed"
-msgstr "選擇失敗"
+#: apt-inst/extract.cc:147
+#, c-format
+msgid "The package is trying to write to the diversion target %s/%s"
+msgstr "此套件試圖寫至抽換後的目標 %s/%s"
-#: methods/http.cc:813
-msgid "Connection timed out"
-msgstr "連線逾時"
+#: apt-inst/extract.cc:157 apt-inst/extract.cc:300
+msgid "The diversion path is too long"
+msgstr "要進行抽換的路徑過長"
-#: methods/http.cc:836
-msgid "Error writing to output file"
-msgstr "在寫入輸出檔時發生錯誤"
+#: apt-inst/extract.cc:243
+#, c-format
+msgid "The directory %s is being replaced by a non-directory"
+msgstr "目錄 %s 已經被非目錄的檔案所取代"
-#: methods/http.cc:867
-msgid "Error writing to file"
-msgstr "在寫入檔案時發生錯誤"
+#: apt-inst/extract.cc:283
+msgid "Failed to locate node in its hash bucket"
+msgstr "在雜湊表中找不到節點"
-#: methods/http.cc:895
-msgid "Error writing to the file"
-msgstr "在寫入該檔時發生錯誤"
+#: apt-inst/extract.cc:287
+msgid "The path is too long"
+msgstr "路徑過長"
-#: methods/http.cc:909
-msgid "Error reading from server. Remote end closed connection"
-msgstr "在讀取伺服器時發生錯誤，遠端主機已關閉連線"
+#: apt-inst/extract.cc:415
+#, c-format
+msgid "Overwrite package match with no version for %s"
+msgstr "以無版本的 %s 覆寫原始套件"
-#: methods/http.cc:911
-msgid "Error reading from server"
-msgstr "在讀取伺服器時發生錯誤"
+#: apt-inst/extract.cc:432
+#, c-format
+msgid "File %s/%s overwrites the one in the package %s"
+msgstr "檔案 %s/%s 覆寫了套件 %s 中的相同檔案"
-#: methods/http.cc:1181
-msgid "Bad header data"
-msgstr "錯誤的標頭資料"
+#: apt-inst/extract.cc:492
+#, c-format
+msgid "Unable to stat %s"
+msgstr "無法取得 %s 的狀態"
-#: methods/http.cc:1198 methods/http.cc:1253
-msgid "Connection failed"
-msgstr "連線失敗"
+#: apt-inst/deb/debfile.cc:41 apt-inst/deb/debfile.cc:46
+#, c-format
+msgid "This is not a valid DEB archive, missing '%s' member"
+msgstr "這是個不正確的 DEB 套件檔，沒有 '%s' 成員"
-#: methods/http.cc:1345
-msgid "Internal error"
-msgstr "內部錯誤"
+#. FIXME: add data.tar.xz here - adding it now would require a Translation round for a very small gain
+#: apt-inst/deb/debfile.cc:55
+#, c-format
+msgid "This is not a valid DEB archive, it has no '%s', '%s' or '%s' member"
+msgstr "這是個不正確的 DEB 套件檔，沒有 '%s', '%s' 或 '%s' 成員"
+
+#: apt-inst/deb/debfile.cc:120
+#, c-format
+msgid "Internal error, could not locate member %s"
+msgstr "內部錯誤，找不找到成員 %s"
+
+#: apt-inst/deb/debfile.cc:214
+msgid "Unparsable control file"
+msgstr "無法分析的 control 檔"
#: apt-pkg/contrib/mmap.cc:79
msgid "Can't mmap an empty file"
msgstr "不能 mmap 空白檔案"
-#: apt-pkg/contrib/mmap.cc:109
+#: apt-pkg/contrib/mmap.cc:110
#, fuzzy, c-format
msgid "Couldn't duplicate file descriptor %i"
msgstr "無法開啟管線給 %s 使用"
-#: apt-pkg/contrib/mmap.cc:117
+#: apt-pkg/contrib/mmap.cc:118
#, fuzzy, c-format
msgid "Couldn't make mmap of %llu bytes"
msgstr "無法 mmap 到 %lu 位元組"
-#: apt-pkg/contrib/mmap.cc:144
+#: apt-pkg/contrib/mmap.cc:145
#, fuzzy
msgid "Unable to close mmap"
msgstr "無法開啟 %s"
-#: apt-pkg/contrib/mmap.cc:172 apt-pkg/contrib/mmap.cc:200
+#: apt-pkg/contrib/mmap.cc:173 apt-pkg/contrib/mmap.cc:201
#, fuzzy
msgid "Unable to synchronize mmap"
msgstr "無法 invoke "
-#: apt-pkg/contrib/mmap.cc:278
+#: apt-pkg/contrib/mmap.cc:279
#, c-format
msgid "Couldn't make mmap of %lu bytes"
msgstr "無法 mmap 到 %lu 位元組"
msgstr ""
#. d means days, h means hours, min means minutes, s means seconds
-#: apt-pkg/contrib/strutl.cc:371
+#: apt-pkg/contrib/strutl.cc:372
#, c-format
msgid "%lid %lih %limin %lis"
msgstr ""
#. h means hours, min means minutes, s means seconds
-#: apt-pkg/contrib/strutl.cc:378
+#: apt-pkg/contrib/strutl.cc:379
#, c-format
msgid "%lih %limin %lis"
msgstr ""
#. min means minutes, s means seconds
-#: apt-pkg/contrib/strutl.cc:385
+#: apt-pkg/contrib/strutl.cc:386
#, c-format
msgid "%limin %lis"
msgstr ""
#. s means seconds
-#: apt-pkg/contrib/strutl.cc:390
+#: apt-pkg/contrib/strutl.cc:391
#, c-format
msgid "%lis"
msgstr ""
-#: apt-pkg/contrib/strutl.cc:1165
+#: apt-pkg/contrib/strutl.cc:1166
#, c-format
msgid "Selection %s not found"
msgstr "選項 %s 找不到"
-#: apt-pkg/contrib/configuration.cc:468
+#: apt-pkg/contrib/configuration.cc:491
#, c-format
msgid "Unrecognized type abbreviation: '%c'"
msgstr "無法辨識的縮寫類型：'%c'"
-#: apt-pkg/contrib/configuration.cc:526
+#: apt-pkg/contrib/configuration.cc:605
#, c-format
msgid "Opening configuration file %s"
msgstr "開啟設定檔 %s"
-#: apt-pkg/contrib/configuration.cc:694
+#: apt-pkg/contrib/configuration.cc:773
#, c-format
msgid "Syntax error %s:%u: Block starts with no name."
msgstr "語法錯誤 %s:%u：區塊開頭沒有名稱。"
-#: apt-pkg/contrib/configuration.cc:713
+#: apt-pkg/contrib/configuration.cc:792
#, c-format
msgid "Syntax error %s:%u: Malformed tag"
msgstr "語法錯誤 %s:%u：標籤格式錯誤"
-#: apt-pkg/contrib/configuration.cc:730
+#: apt-pkg/contrib/configuration.cc:809
#, c-format
msgid "Syntax error %s:%u: Extra junk after value"
msgstr "語法錯誤 %s:%u：數值後有多餘的垃圾"
-#: apt-pkg/contrib/configuration.cc:770
+#: apt-pkg/contrib/configuration.cc:849
#, c-format
msgid "Syntax error %s:%u: Directives can only be done at the top level"
msgstr "語法錯誤 %s:%u：指令只能於最高層級執行"
-#: apt-pkg/contrib/configuration.cc:777
+#: apt-pkg/contrib/configuration.cc:856
#, c-format
msgid "Syntax error %s:%u: Too many nested includes"
msgstr "語法錯誤 %s:%u: 太多巢狀引入檔"
-#: apt-pkg/contrib/configuration.cc:781 apt-pkg/contrib/configuration.cc:786
+#: apt-pkg/contrib/configuration.cc:860 apt-pkg/contrib/configuration.cc:865
#, c-format
msgid "Syntax error %s:%u: Included from here"
msgstr "語法錯誤 %s:%u：從此引入"
-#: apt-pkg/contrib/configuration.cc:790
+#: apt-pkg/contrib/configuration.cc:869
#, c-format
msgid "Syntax error %s:%u: Unsupported directive '%s'"
msgstr "語法錯誤 %s:%u：不支援的指令 '%s'"
-#: apt-pkg/contrib/configuration.cc:793
+#: apt-pkg/contrib/configuration.cc:872
#, fuzzy, c-format
msgid "Syntax error %s:%u: clear directive requires an option tree as argument"
msgstr "語法錯誤 %s:%u：指令只能於最高層級執行"
-#: apt-pkg/contrib/configuration.cc:843
+#: apt-pkg/contrib/configuration.cc:922
#, c-format
msgid "Syntax error %s:%u: Extra junk at end of file"
msgstr "語法錯誤 %s:%u：在檔案結尾有多餘的垃圾"
msgid "Command line option '%c' [from %s] is not known."
msgstr "未知的命令列選項 '%c' [來自 %s]。"
-#: apt-pkg/contrib/cmndline.cc:104 apt-pkg/contrib/cmndline.cc:112
-#: apt-pkg/contrib/cmndline.cc:120
+#: apt-pkg/contrib/cmndline.cc:105 apt-pkg/contrib/cmndline.cc:114
+#: apt-pkg/contrib/cmndline.cc:122
#, c-format
msgid "Command line option %s is not understood"
msgstr "無法理解的命令列選項 %s"
-#: apt-pkg/contrib/cmndline.cc:125
+#: apt-pkg/contrib/cmndline.cc:127
#, c-format
msgid "Command line option %s is not boolean"
msgstr "命令列選項 %s 不是 boolean 值"
-#: apt-pkg/contrib/cmndline.cc:166 apt-pkg/contrib/cmndline.cc:187
+#: apt-pkg/contrib/cmndline.cc:168 apt-pkg/contrib/cmndline.cc:189
#, c-format
msgid "Option %s requires an argument."
msgstr "需替選項 %s 指定參數。"
-#: apt-pkg/contrib/cmndline.cc:200 apt-pkg/contrib/cmndline.cc:206
+#: apt-pkg/contrib/cmndline.cc:202 apt-pkg/contrib/cmndline.cc:208
#, c-format
msgid "Option %s: Configuration item specification must have an =<val>."
msgstr "選項 %s：在指定設定項目時應該有 =<val>。"
-#: apt-pkg/contrib/cmndline.cc:235
+#: apt-pkg/contrib/cmndline.cc:237
#, c-format
msgid "Option %s requires an integer argument, not '%s'"
msgstr "選項 %s 的參數應該是數字，而不是 '%s'"
-#: apt-pkg/contrib/cmndline.cc:266
+#: apt-pkg/contrib/cmndline.cc:268
#, c-format
msgid "Option '%s' is too long"
msgstr "選項 %s 太長"
-#: apt-pkg/contrib/cmndline.cc:298
+#: apt-pkg/contrib/cmndline.cc:300
#, c-format
msgid "Sense %s is not understood, try true or false."
msgstr "偵測器 %s 無法理解，試試 true 或 false。"
-#: apt-pkg/contrib/cmndline.cc:348
+#: apt-pkg/contrib/cmndline.cc:350
#, c-format
msgid "Invalid operation %s"
msgstr "無效的操作 %s"
msgid "Unable to stat the mount point %s"
msgstr "無法取得掛載點 %s 的狀態"
-#: apt-pkg/contrib/cdromutl.cc:179 apt-pkg/contrib/cdromutl.cc:213
-#: apt-pkg/acquire.cc:462 apt-pkg/acquire.cc:487 apt-pkg/clean.cc:42
-#: methods/mirror.cc:101
-#, c-format
-msgid "Unable to change to %s"
-msgstr "無法切換至 %s"
-
#: apt-pkg/contrib/cdromutl.cc:224
msgid "Failed to stat the cdrom"
msgstr "無法取得 CD-ROM 的狀態"
-#: apt-pkg/contrib/fileutl.cc:197
+#: apt-pkg/contrib/fileutl.cc:93
+#, fuzzy, c-format
+msgid "Problem closing the gzip file %s"
+msgstr "在關閉檔案時發生問題"
+
+#: apt-pkg/contrib/fileutl.cc:225
#, c-format
msgid "Not using locking for read only lock file %s"
msgstr "不在唯讀檔案 %s 上使用檔案鎖定"
-#: apt-pkg/contrib/fileutl.cc:202
+#: apt-pkg/contrib/fileutl.cc:230
#, c-format
msgid "Could not open lock file %s"
msgstr "無法開啟鎖定檔 %s"
-#: apt-pkg/contrib/fileutl.cc:220
+#: apt-pkg/contrib/fileutl.cc:248
#, c-format
msgid "Not using locking for nfs mounted lock file %s"
msgstr "不在以 nfs 掛載的檔案 %s 上使用檔案鎖定"
-#: apt-pkg/contrib/fileutl.cc:224
+#: apt-pkg/contrib/fileutl.cc:252
#, c-format
msgid "Could not get lock %s"
msgstr "無法將 %s 鎖定"
-#: apt-pkg/contrib/fileutl.cc:364
+#: apt-pkg/contrib/fileutl.cc:392 apt-pkg/contrib/fileutl.cc:506
#, c-format
msgid "List of files can't be created as '%s' is not a directory"
msgstr ""
-#: apt-pkg/contrib/fileutl.cc:391
+#: apt-pkg/contrib/fileutl.cc:426
#, c-format
msgid "Ignoring '%s' in directory '%s' as it is not a regular file"
msgstr ""
-#: apt-pkg/contrib/fileutl.cc:409
+#: apt-pkg/contrib/fileutl.cc:444
#, c-format
msgid "Ignoring file '%s' in directory '%s' as it has no filename extension"
msgstr ""
-#: apt-pkg/contrib/fileutl.cc:418
+#: apt-pkg/contrib/fileutl.cc:453
#, c-format
msgid ""
"Ignoring file '%s' in directory '%s' as it has an invalid filename extension"
msgstr ""
-#: apt-pkg/contrib/fileutl.cc:719 apt-pkg/deb/dpkgpm.cc:950
-#, c-format
-msgid "Waited for %s but it wasn't there"
-msgstr "等待 %s 但是它並不存在"
-
-#: apt-pkg/contrib/fileutl.cc:731
+#: apt-pkg/contrib/fileutl.cc:840
#, c-format
msgid "Sub-process %s received a segmentation fault."
msgstr "子程序 %s 收到一個記憶體錯誤。"
-#: apt-pkg/contrib/fileutl.cc:733
+#: apt-pkg/contrib/fileutl.cc:842
#, fuzzy, c-format
msgid "Sub-process %s received signal %u."
msgstr "子程序 %s 收到一個記憶體錯誤。"
-#: apt-pkg/contrib/fileutl.cc:737
+#: apt-pkg/contrib/fileutl.cc:846
#, c-format
msgid "Sub-process %s returned an error code (%u)"
msgstr "子程序 %s 傳回錯誤碼 (%u)"
-#: apt-pkg/contrib/fileutl.cc:739
+#: apt-pkg/contrib/fileutl.cc:848
#, c-format
msgid "Sub-process %s exited unexpectedly"
msgstr "子程序 %s 不預期得結束"
-#: apt-pkg/contrib/fileutl.cc:877 apt-pkg/indexcopy.cc:655
+#: apt-pkg/contrib/fileutl.cc:984 apt-pkg/indexcopy.cc:655
#, c-format
msgid "Could not open file %s"
msgstr "無法開啟檔案 %s"
-#: apt-pkg/contrib/fileutl.cc:923
+#: apt-pkg/contrib/fileutl.cc:1046
#, fuzzy, c-format
msgid "Could not open file descriptor %d"
msgstr "無法開啟管線給 %s 使用"
-#: apt-pkg/contrib/fileutl.cc:970
+#: apt-pkg/contrib/fileutl.cc:1136
msgid "Failed to create subprocess IPC"
msgstr "無法建立子程序 IPC"
-#: apt-pkg/contrib/fileutl.cc:1019
+#: apt-pkg/contrib/fileutl.cc:1192
msgid "Failed to exec compressor "
msgstr "無法執行壓縮程式"
-#: apt-pkg/contrib/fileutl.cc:1087
+#: apt-pkg/contrib/fileutl.cc:1289
#, fuzzy, c-format
msgid "read, still have %llu to read but none left"
msgstr "讀取，仍有 %lu 未讀但已無空間"
-#: apt-pkg/contrib/fileutl.cc:1152
+#: apt-pkg/contrib/fileutl.cc:1378 apt-pkg/contrib/fileutl.cc:1400
#, fuzzy, c-format
msgid "write, still have %llu to write but couldn't"
msgstr "寫入，仍有 %lu 待寫入但已沒辨法"
-#: apt-pkg/contrib/fileutl.cc:1410
-#, fuzzy, c-format
-msgid "Problem closing the gzip file %s"
-msgstr "在關閉檔案時發生問題"
-
-#: apt-pkg/contrib/fileutl.cc:1414
+#: apt-pkg/contrib/fileutl.cc:1716
#, fuzzy, c-format
msgid "Problem closing the file %s"
msgstr "在關閉檔案時發生問題"
-#: apt-pkg/contrib/fileutl.cc:1419
+#: apt-pkg/contrib/fileutl.cc:1728
#, fuzzy, c-format
msgid "Problem renaming the file %s to %s"
msgstr "在同步檔案時發生問題"
-#: apt-pkg/contrib/fileutl.cc:1430
+#: apt-pkg/contrib/fileutl.cc:1739
#, fuzzy, c-format
msgid "Problem unlinking the file %s"
msgstr "在刪除檔案時發生問題"
-#: apt-pkg/contrib/fileutl.cc:1450
+#: apt-pkg/contrib/fileutl.cc:1755
msgid "Problem syncing the file"
msgstr "在同步檔案時發生問題"
msgid "Failed to write temporary StateFile %s"
msgstr "無法寫入暫存的 StateFile %s"
-#: apt-pkg/tagfile.cc:126
+#: apt-pkg/tagfile.cc:129
#, c-format
msgid "Unable to parse package file %s (1)"
msgstr "無法辨識套件檔 %s (1)"
-#: apt-pkg/tagfile.cc:213
+#: apt-pkg/tagfile.cc:216
#, c-format
msgid "Unable to parse package file %s (2)"
msgstr "無法辨識套件檔 %s (2)"
msgid "Opening %s"
msgstr "正在開啟 %s"
-#: apt-pkg/sourcelist.cc:265 apt-pkg/cdrom.cc:485
+#: apt-pkg/sourcelist.cc:265 apt-pkg/cdrom.cc:469
#, c-format
msgid "Line %u too long in source list %s."
msgstr "來源列表 %2$s 中的第 %1$u 行太長。"
msgid "Type '%s' is not known on line %u in source list %s"
msgstr "未知的類型 '%1$s'，位於在來源列表 %3$s 中的第 %2$u 行"
-#: apt-pkg/packagemanager.cc:298 apt-pkg/packagemanager.cc:775
+#: apt-pkg/packagemanager.cc:297 apt-pkg/packagemanager.cc:891
#, c-format
msgid ""
"Could not perform immediate configuration on '%s'. Please see man 5 apt.conf "
"under APT::Immediate-Configure for details. (%d)"
msgstr ""
-#: apt-pkg/packagemanager.cc:437 apt-pkg/packagemanager.cc:467
+#: apt-pkg/packagemanager.cc:473 apt-pkg/packagemanager.cc:503
#, fuzzy, c-format
msgid "Could not configure '%s'. "
msgstr "無法開啟檔案 %s"
-#: apt-pkg/packagemanager.cc:507
+#: apt-pkg/packagemanager.cc:545
#, c-format
msgid ""
"This installation run will require temporarily removing the essential "
msgid "Index file type '%s' is not supported"
msgstr "不被支援的索引檔類型 '%s'"
-#: apt-pkg/algorithms.cc:255
+#: apt-pkg/algorithms.cc:261
#, c-format
msgid ""
"The package %s needs to be reinstalled, but I can't find an archive for it."
msgstr "套件 %s 需要重新安裝，但找不到它的套件檔。"
-#: apt-pkg/algorithms.cc:1191
+#: apt-pkg/algorithms.cc:1223
msgid ""
"Error, pkgProblemResolver::Resolve generated breaks, this may be caused by "
"held packages."
"錯誤，pkgProblemResolver::Resolve 的建立中斷了，這可能肇因於保留 (hold) 套"
"件。"
-#: apt-pkg/algorithms.cc:1193
+#: apt-pkg/algorithms.cc:1225
msgid "Unable to correct problems, you have held broken packages."
msgstr "無法修正問題，您保留 (hold) 了損毀的套件。"
-#: apt-pkg/algorithms.cc:1518 apt-pkg/algorithms.cc:1520
+#: apt-pkg/algorithms.cc:1569 apt-pkg/algorithms.cc:1571
#, fuzzy
msgid ""
"Some index files failed to download. They have been ignored, or old ones "
#. only show the ETA if it makes sense
#. two days
-#: apt-pkg/acquire.cc:864
+#: apt-pkg/acquire.cc:893
#, c-format
msgid "Retrieving file %li of %li (%s remaining)"
msgstr "正在取得檔案 %li/%li（還有 %s）"
-#: apt-pkg/acquire.cc:866
+#: apt-pkg/acquire.cc:895
#, c-format
msgid "Retrieving file %li of %li"
msgstr "正在取得檔案 %li/%li"
msgid "Method %s did not start correctly"
msgstr "安裝方式 %s 沒有正確啟動"
-#: apt-pkg/acquire-worker.cc:425
+#: apt-pkg/acquire-worker.cc:440
#, c-format
msgid "Please insert the disc labeled: '%s' in the drive '%s' and press enter."
msgstr "請把標籤為 '%s' 的光碟放入 '%s' 裝置中，然後按下 [Enter] 鍵。"
msgid "Unable to determine a suitable packaging system type"
msgstr "無法確認合適的套件包裝系統類型"
-#: apt-pkg/clean.cc:59
+#: apt-pkg/clean.cc:57
#, c-format
msgid "Unable to stat %s."
msgstr "無法取得 %s 的狀態。"
#. TRANSLATOR: The first placeholder is a package name,
#. the other two should be copied verbatim as they include debug info
#: apt-pkg/pkgcachegen.cc:211 apt-pkg/pkgcachegen.cc:277
-#: apt-pkg/pkgcachegen.cc:313 apt-pkg/pkgcachegen.cc:355
-#: apt-pkg/pkgcachegen.cc:359 apt-pkg/pkgcachegen.cc:376
-#: apt-pkg/pkgcachegen.cc:386 apt-pkg/pkgcachegen.cc:390
-#: apt-pkg/pkgcachegen.cc:394 apt-pkg/pkgcachegen.cc:415
-#: apt-pkg/pkgcachegen.cc:420 apt-pkg/pkgcachegen.cc:465
-#: apt-pkg/pkgcachegen.cc:496 apt-pkg/pkgcachegen.cc:510
+#: apt-pkg/pkgcachegen.cc:308 apt-pkg/pkgcachegen.cc:316
+#: apt-pkg/pkgcachegen.cc:358 apt-pkg/pkgcachegen.cc:362
+#: apt-pkg/pkgcachegen.cc:379 apt-pkg/pkgcachegen.cc:389
+#: apt-pkg/pkgcachegen.cc:393 apt-pkg/pkgcachegen.cc:397
+#: apt-pkg/pkgcachegen.cc:418 apt-pkg/pkgcachegen.cc:423
+#: apt-pkg/pkgcachegen.cc:463 apt-pkg/pkgcachegen.cc:471
+#: apt-pkg/pkgcachegen.cc:502 apt-pkg/pkgcachegen.cc:516
#, fuzzy, c-format
msgid "Error occurred while processing %s (%s%d)"
msgstr "在處理 %s 時發生錯誤 (FindPkg)"
msgid "Wow, you exceeded the number of dependencies this APT is capable of."
msgstr "哇呀，您已經超過這個 APT 所能處理的相依關係數量了。"
-#: apt-pkg/pkgcachegen.cc:517
+#: apt-pkg/pkgcachegen.cc:523
#, c-format
msgid "Package %s %s was not found while processing file dependencies"
msgstr "在計算檔案相依性時找不到套件 %s %s"
-#: apt-pkg/pkgcachegen.cc:1082
+#: apt-pkg/pkgcachegen.cc:1088
#, c-format
msgid "Couldn't stat source package list %s"
msgstr "無法取得來源套件列表 %s 的狀態"
-#: apt-pkg/pkgcachegen.cc:1187
+#: apt-pkg/pkgcachegen.cc:1176 apt-pkg/pkgcachegen.cc:1280
+#: apt-pkg/pkgcachegen.cc:1286 apt-pkg/pkgcachegen.cc:1443
+msgid "Reading package lists"
+msgstr "正在讀取套件清單"
+
+#: apt-pkg/pkgcachegen.cc:1193
msgid "Collecting File Provides"
msgstr "正在收集檔案提供者"
-#: apt-pkg/pkgcachegen.cc:1378 apt-pkg/pkgcachegen.cc:1385
+#: apt-pkg/pkgcachegen.cc:1385 apt-pkg/pkgcachegen.cc:1392
msgid "IO Error saving source cache"
msgstr "在儲存來源快取時 IO 錯誤"
msgid "rename failed, %s (%s -> %s)."
msgstr "無法重新命名，%s (%s -> %s)。"
-#: apt-pkg/acquire-item.cc:640
+#: apt-pkg/acquire-item.cc:599
msgid "MD5Sum mismatch"
msgstr "MD5Sum 不符"
-#: apt-pkg/acquire-item.cc:911 apt-pkg/acquire-item.cc:1863
-#: apt-pkg/acquire-item.cc:2006
+#: apt-pkg/acquire-item.cc:870 apt-pkg/acquire-item.cc:1859
+#: apt-pkg/acquire-item.cc:2002
msgid "Hash Sum mismatch"
msgstr "Hash Sum 不符"
-#: apt-pkg/acquire-item.cc:1399
+#: apt-pkg/acquire-item.cc:1370
#, c-format
msgid ""
"Unable to find expected entry '%s' in Release file (Wrong sources.list entry "
"or malformed file)"
msgstr ""
-#: apt-pkg/acquire-item.cc:1415
+#: apt-pkg/acquire-item.cc:1386
#, fuzzy, c-format
msgid "Unable to find hash sum for '%s' in Release file"
msgstr "無法辨別 Release 檔 %s"
-#: apt-pkg/acquire-item.cc:1450
+#: apt-pkg/acquire-item.cc:1428
msgid "There is no public key available for the following key IDs:\n"
msgstr "無法取得以下的密鑰 ID 的公鑰：\n"
-#: apt-pkg/acquire-item.cc:1488
+#: apt-pkg/acquire-item.cc:1466
#, c-format
msgid ""
"Release file for %s is expired (invalid since %s). Updates for this "
"repository will not be applied."
msgstr ""
-#: apt-pkg/acquire-item.cc:1510
+#: apt-pkg/acquire-item.cc:1488
#, c-format
msgid "Conflicting distribution: %s (expected %s but got %s)"
msgstr "發行版本衝突：%s（應當是 %s 但卻得到 %s）"
-#: apt-pkg/acquire-item.cc:1543
+#: apt-pkg/acquire-item.cc:1521
#, c-format
msgid ""
"A error occurred during the signature verification. The repository is not "
msgstr ""
#. Invalid signature file, reject (LP: #346386) (Closes: #627642)
-#: apt-pkg/acquire-item.cc:1553 apt-pkg/acquire-item.cc:1558
+#: apt-pkg/acquire-item.cc:1531 apt-pkg/acquire-item.cc:1536
#, c-format
msgid "GPG error: %s: %s"
msgstr ""
-#: apt-pkg/acquire-item.cc:1650
+#: apt-pkg/acquire-item.cc:1635
#, c-format
msgid ""
"I wasn't able to locate a file for the %s package. This might mean you need "
"找不到 %s 套件的某個檔案。這意味著您可能要手動修復這個套件。（因為找不到平"
"台）"
-#: apt-pkg/acquire-item.cc:1709
+#: apt-pkg/acquire-item.cc:1694
#, c-format
msgid ""
"I wasn't able to locate a file for the %s package. This might mean you need "
"to manually fix this package."
msgstr "找不到 %s 套件的某個檔案。這意味著您可能要手動修復這個套件。"
-#: apt-pkg/acquire-item.cc:1768
+#: apt-pkg/acquire-item.cc:1753
#, c-format
msgid ""
"The package index files are corrupted. No Filename: field for package %s."
msgstr "這個套件的索引檔損壞了。沒有套件 %s 的 Filename: 欄位。"
-#: apt-pkg/acquire-item.cc:1855
+#: apt-pkg/acquire-item.cc:1851
msgid "Size mismatch"
msgstr "大小不符"
-#: apt-pkg/indexrecords.cc:61
+#: apt-pkg/indexrecords.cc:64
#, c-format
msgid "Unable to parse Release file %s"
msgstr "無法辨別 Release 檔 %s"
-#: apt-pkg/indexrecords.cc:71
+#: apt-pkg/indexrecords.cc:74
#, c-format
msgid "No sections in Release file %s"
msgstr "在 Release 檔 %s 裡沒有區段"
-#: apt-pkg/indexrecords.cc:105
+#: apt-pkg/indexrecords.cc:108
#, c-format
msgid "No Hash entry in Release file %s"
msgstr "在 Release 檔 %s 裡沒有 Hash 項目"
-#: apt-pkg/indexrecords.cc:118
+#: apt-pkg/indexrecords.cc:121
#, fuzzy, c-format
msgid "Invalid 'Valid-Until' entry in Release file %s"
msgstr "在 Release 檔 %s 裡沒有 Hash 項目"
-#: apt-pkg/indexrecords.cc:137
+#: apt-pkg/indexrecords.cc:140
#, fuzzy, c-format
msgid "Invalid 'Date' entry in Release file %s"
msgstr "在 Release 檔 %s 裡沒有 Hash 項目"
msgid "Vendor block %s contains no fingerprint"
msgstr "提供者區塊 %s 沒有包含指紋碼"
-#: apt-pkg/cdrom.cc:566
+#: apt-pkg/cdrom.cc:550
#, c-format
msgid ""
"Using CD-ROM mount point %s\n"
"使用光碟機掛載點 %s\n"
"正在掛載光碟機\n"
-#: apt-pkg/cdrom.cc:575 apt-pkg/cdrom.cc:672
+#: apt-pkg/cdrom.cc:559 apt-pkg/cdrom.cc:656
msgid "Identifying.. "
msgstr "正在識別.."
-#: apt-pkg/cdrom.cc:603
+#: apt-pkg/cdrom.cc:587
#, c-format
msgid "Stored label: %s\n"
msgstr "保存標籤：%s\n"
-#: apt-pkg/cdrom.cc:612 apt-pkg/cdrom.cc:894
+#: apt-pkg/cdrom.cc:596 apt-pkg/cdrom.cc:879
msgid "Unmounting CD-ROM...\n"
msgstr "正在卸載光碟機...\n"
-#: apt-pkg/cdrom.cc:632
+#: apt-pkg/cdrom.cc:616
#, c-format
msgid "Using CD-ROM mount point %s\n"
msgstr "使用光碟機掛載點 %s\n"
-#: apt-pkg/cdrom.cc:650
+#: apt-pkg/cdrom.cc:634
msgid "Unmounting CD-ROM\n"
msgstr "正在卸載光碟機\n"
-#: apt-pkg/cdrom.cc:655
+#: apt-pkg/cdrom.cc:639
msgid "Waiting for disc...\n"
msgstr "正在等待碟片...\n"
-#: apt-pkg/cdrom.cc:664
+#: apt-pkg/cdrom.cc:648
msgid "Mounting CD-ROM...\n"
msgstr "正在掛載光碟機... \n"
-#: apt-pkg/cdrom.cc:683
+#: apt-pkg/cdrom.cc:667
msgid "Scanning disc for index files..\n"
msgstr "正在掃描碟片中的索引檔..\n"
-#: apt-pkg/cdrom.cc:731
+#: apt-pkg/cdrom.cc:716
#, c-format
msgid ""
"Found %zu package indexes, %zu source indexes, %zu translation indexes and "
"%zu signatures\n"
msgstr "找到了 %zu 個套件索引，%zu 個原始碼索引，%zu 個翻譯索引及 %zu 個簽章\n"
-#: apt-pkg/cdrom.cc:742
+#: apt-pkg/cdrom.cc:727
msgid ""
"Unable to locate any package files, perhaps this is not a Debian Disc or the "
"wrong architecture?"
msgstr ""
-#: apt-pkg/cdrom.cc:769
+#: apt-pkg/cdrom.cc:754
#, c-format
msgid "Found label '%s'\n"
msgstr "找到標籤 '%s'\n"
-#: apt-pkg/cdrom.cc:798
+#: apt-pkg/cdrom.cc:783
msgid "That is not a valid name, try again.\n"
msgstr "這並不是正確的名稱，請重試。\n"
-#: apt-pkg/cdrom.cc:815
+#: apt-pkg/cdrom.cc:800
#, c-format
msgid ""
"This disc is called: \n"
"這個碟片名為：\n"
"'%s'\n"
-#: apt-pkg/cdrom.cc:817
+#: apt-pkg/cdrom.cc:802
msgid "Copying package lists..."
msgstr "正在複製套件清單..."
-#: apt-pkg/cdrom.cc:844
+#: apt-pkg/cdrom.cc:829
msgid "Writing new source list\n"
msgstr "正在寫入新的來源列表\n"
-#: apt-pkg/cdrom.cc:852
+#: apt-pkg/cdrom.cc:837
msgid "Source list entries for this disc are:\n"
msgstr "該碟片的來源列表項目為：\n"
msgid "No keyring installed in %s."
msgstr "放棄安裝。"
-#: apt-pkg/cacheset.cc:352
+#: apt-pkg/cacheset.cc:401
#, c-format
msgid "Release '%s' for '%s' was not found"
msgstr "找不到 '%2$s' 的 '%1$s' 發行版"
-#: apt-pkg/cacheset.cc:355
+#: apt-pkg/cacheset.cc:404
#, c-format
msgid "Version '%s' for '%s' was not found"
msgstr "找不到 '%s' 版的 '%s'"
-#: apt-pkg/cacheset.cc:466
+#: apt-pkg/cacheset.cc:515
#, fuzzy, c-format
msgid "Couldn't find task '%s'"
msgstr "無法找到主題 %s"
-#: apt-pkg/cacheset.cc:472
+#: apt-pkg/cacheset.cc:521
#, fuzzy, c-format
msgid "Couldn't find any package by regex '%s'"
msgstr "無法找到套件 %s"
-#: apt-pkg/cacheset.cc:483
+#: apt-pkg/cacheset.cc:532
#, c-format
msgid "Can't select versions from package '%s' as it is purely virtual"
msgstr ""
-#: apt-pkg/cacheset.cc:490 apt-pkg/cacheset.cc:497
+#: apt-pkg/cacheset.cc:539 apt-pkg/cacheset.cc:546
#, c-format
msgid ""
"Can't select installed nor candidate version from package '%s' as it has "
"neither of them"
msgstr ""
-#: apt-pkg/cacheset.cc:504
+#: apt-pkg/cacheset.cc:553
#, c-format
msgid "Can't select newest version from package '%s' as it is purely virtual"
msgstr ""
-#: apt-pkg/cacheset.cc:512
+#: apt-pkg/cacheset.cc:561
#, c-format
msgid "Can't select candidate version from package %s as it has no candidate"
msgstr ""
-#: apt-pkg/cacheset.cc:520
+#: apt-pkg/cacheset.cc:569
#, c-format
msgid "Can't select installed version from package %s as it is not installed"
msgstr ""
msgid "Send scenario to solver"
msgstr ""
-#: apt-pkg/edsp.cc:213
+#: apt-pkg/edsp.cc:209
msgid "Send request to solver"
msgstr ""
-#: apt-pkg/edsp.cc:281
+#: apt-pkg/edsp.cc:277
msgid "Prepare for receiving solution"
msgstr ""
-#: apt-pkg/edsp.cc:288
+#: apt-pkg/edsp.cc:284
msgid "External solver failed without a proper error message"
msgstr ""
-#: apt-pkg/edsp.cc:559 apt-pkg/edsp.cc:562 apt-pkg/edsp.cc:567
+#: apt-pkg/edsp.cc:555 apt-pkg/edsp.cc:558 apt-pkg/edsp.cc:563
msgid "Execute external solver"
msgstr ""
-#: apt-pkg/deb/dpkgpm.cc:71
+#: apt-pkg/deb/dpkgpm.cc:73
#, c-format
msgid "Installing %s"
msgstr "正在安裝 %s"
-#: apt-pkg/deb/dpkgpm.cc:72 apt-pkg/deb/dpkgpm.cc:900
+#: apt-pkg/deb/dpkgpm.cc:74 apt-pkg/deb/dpkgpm.cc:952
#, c-format
msgid "Configuring %s"
msgstr "正在設定 %s"
-#: apt-pkg/deb/dpkgpm.cc:73 apt-pkg/deb/dpkgpm.cc:907
+#: apt-pkg/deb/dpkgpm.cc:75 apt-pkg/deb/dpkgpm.cc:959
#, c-format
msgid "Removing %s"
msgstr "正在移除 %s"
-#: apt-pkg/deb/dpkgpm.cc:74
+#: apt-pkg/deb/dpkgpm.cc:76
#, fuzzy, c-format
msgid "Completely removing %s"
msgstr "已完整移除 %s"
-#: apt-pkg/deb/dpkgpm.cc:75
+#: apt-pkg/deb/dpkgpm.cc:77
#, c-format
msgid "Noting disappearance of %s"
msgstr ""
-#: apt-pkg/deb/dpkgpm.cc:76
+#: apt-pkg/deb/dpkgpm.cc:78
#, c-format
msgid "Running post-installation trigger %s"
msgstr "正在執行安裝後套件後續處理程式 %s"
#. FIXME: use a better string after freeze
-#: apt-pkg/deb/dpkgpm.cc:672
+#: apt-pkg/deb/dpkgpm.cc:705
#, c-format
msgid "Directory '%s' missing"
msgstr "找不到 '%s' 目錄"
-#: apt-pkg/deb/dpkgpm.cc:687 apt-pkg/deb/dpkgpm.cc:707
+#: apt-pkg/deb/dpkgpm.cc:720 apt-pkg/deb/dpkgpm.cc:740
#, fuzzy, c-format
msgid "Could not open file '%s'"
msgstr "無法開啟檔案 %s"
-#: apt-pkg/deb/dpkgpm.cc:893
+#: apt-pkg/deb/dpkgpm.cc:945
#, c-format
msgid "Preparing %s"
msgstr "正在準備 %s"
-#: apt-pkg/deb/dpkgpm.cc:894
+#: apt-pkg/deb/dpkgpm.cc:946
#, c-format
msgid "Unpacking %s"
msgstr "正在解開 %s"
-#: apt-pkg/deb/dpkgpm.cc:899
+#: apt-pkg/deb/dpkgpm.cc:951
#, c-format
msgid "Preparing to configure %s"
msgstr "正在準備設定 %s"
-#: apt-pkg/deb/dpkgpm.cc:901
+#: apt-pkg/deb/dpkgpm.cc:953
#, c-format
msgid "Installed %s"
msgstr "已安裝 %s"
-#: apt-pkg/deb/dpkgpm.cc:906
+#: apt-pkg/deb/dpkgpm.cc:958
#, c-format
msgid "Preparing for removal of %s"
msgstr "正在準備移除 %s"
-#: apt-pkg/deb/dpkgpm.cc:908
+#: apt-pkg/deb/dpkgpm.cc:960
#, c-format
msgid "Removed %s"
msgstr "已移除 %s"
-#: apt-pkg/deb/dpkgpm.cc:913
+#: apt-pkg/deb/dpkgpm.cc:965
#, c-format
msgid "Preparing to completely remove %s"
msgstr "正在準備完整移除 %s"
-#: apt-pkg/deb/dpkgpm.cc:914
+#: apt-pkg/deb/dpkgpm.cc:966
#, c-format
msgid "Completely removed %s"
msgstr "已完整移除 %s"
-#: apt-pkg/deb/dpkgpm.cc:1142
+#: apt-pkg/deb/dpkgpm.cc:1209
msgid "Can not write log, openpty() failed (/dev/pts not mounted?)\n"
msgstr "無法寫入記錄檔，openpty() 失敗（/dev/pts 未掛載？）\n"
-#: apt-pkg/deb/dpkgpm.cc:1172
+#: apt-pkg/deb/dpkgpm.cc:1239
msgid "Running dpkg"
msgstr ""
-#: apt-pkg/deb/dpkgpm.cc:1351
+#: apt-pkg/deb/dpkgpm.cc:1411
msgid "Operation was interrupted before it could finish"
msgstr ""
-#: apt-pkg/deb/dpkgpm.cc:1408
+#: apt-pkg/deb/dpkgpm.cc:1473
msgid "No apport report written because MaxReports is reached already"
msgstr ""
#. check if its not a follow up error
-#: apt-pkg/deb/dpkgpm.cc:1413
+#: apt-pkg/deb/dpkgpm.cc:1478
msgid "dependency problems - leaving unconfigured"
msgstr ""
-#: apt-pkg/deb/dpkgpm.cc:1415
+#: apt-pkg/deb/dpkgpm.cc:1480
msgid ""
"No apport report written because the error message indicates its a followup "
"error from a previous failure."
msgstr ""
-#: apt-pkg/deb/dpkgpm.cc:1421
+#: apt-pkg/deb/dpkgpm.cc:1486
msgid ""
"No apport report written because the error message indicates a disk full "
"error"
msgstr ""
-#: apt-pkg/deb/dpkgpm.cc:1427
+#: apt-pkg/deb/dpkgpm.cc:1492
msgid ""
"No apport report written because the error message indicates a out of memory "
"error"
msgstr ""
-#: apt-pkg/deb/dpkgpm.cc:1434
+#: apt-pkg/deb/dpkgpm.cc:1499
msgid ""
"No apport report written because the error message indicates a dpkg I/O error"
msgstr ""
msgid "Not locked"
msgstr ""
-#. FIXME: fallback to a default mirror here instead
-#. and provide a config option to define that default
-#: methods/mirror.cc:279
-#, c-format
-msgid "No mirror file '%s' found "
-msgstr ""
+#~ msgid "Failed to remove %s"
+#~ msgstr "無法移除 %s"
-#. FIXME: fallback to a default mirror here instead
-#. and provide a config option to define that default
-#: methods/mirror.cc:286
-#, fuzzy, c-format
-msgid "Can not read mirror file '%s'"
-msgstr "無法開啟檔案 %s"
+#~ msgid "Unable to create %s"
+#~ msgstr "無法建立 %s"
-#: methods/mirror.cc:441
-#, c-format
-msgid "[Mirror: %s]"
-msgstr ""
+#~ msgid "Failed to stat %sinfo"
+#~ msgstr "無法取得 %sinfo 的狀態"
-#: methods/rred.cc:472
-#, c-format
-msgid ""
-"Could not patch %s with mmap and with file operation usage - the patch seems "
-"to be corrupt."
-msgstr ""
+#~ msgid "The info and temp directories need to be on the same filesystem"
+#~ msgstr "資料目錄與暫存目錄需位於同一檔案系統中"
-#: methods/rred.cc:477
-#, c-format
-msgid ""
-"Could not patch %s with mmap (but no mmap specific fail) - the patch seems "
-"to be corrupt."
-msgstr ""
+#~ msgid "Failed to change to the admin dir %sinfo"
+#~ msgstr "無法切換至管理者目錄 %sinfo"
-#: methods/rsh.cc:336
-msgid "Connection closed prematurely"
-msgstr "連線突然終止"
+#~ msgid "Internal error getting a package name"
+#~ msgstr "內部錯誤，無法取得套件名稱"
+
+#~ msgid "Reading file listing"
+#~ msgstr "正在讀取檔案清單"
+
+#~ msgid ""
+#~ "Failed to open the list file '%sinfo/%s'. If you cannot restore this file "
+#~ "then make it empty and immediately re-install the same version of the "
+#~ "package!"
+#~ msgstr ""
+#~ "無法開啟清單檔 %sinfo/%s。如果您無法將此檔案還原，請清除檔案內容，然後立即"
+#~ "重新安裝同一版本的套件！"
+
+#~ msgid "Failed reading the list file %sinfo/%s"
+#~ msgstr "無法讀取清單檔 %sinfo/%s"
+
+#~ msgid "Internal error getting a node"
+#~ msgstr "內部錯誤，無法取得節點"
+
+#~ msgid "Failed to open the diversions file %sdiversions"
+#~ msgstr "讀取抽換檔 %sdiversions 失敗"
+
+#~ msgid "The diversion file is corrupted"
+#~ msgstr "抽換檔已損壞"
+
+#~ msgid "Invalid line in the diversion file: %s"
+#~ msgstr "在抽換檔中的這一行有誤：%s"
+
+#~ msgid "Internal error adding a diversion"
+#~ msgstr "內部錯誤：在新增抽換資料時發生錯誤"
+
+#~ msgid "The pkg cache must be initialized first"
+#~ msgstr "套件快取必須先初始化"
+
+#~ msgid "Failed to find a Package: header, offset %lu"
+#~ msgstr "找不到套件：檔案標頭，位移 %lu"
+
+#~ msgid "Bad ConfFile section in the status file. Offset %lu"
+#~ msgstr "在 status 檔中的 ConfFile 區段損壞。位移 %lu"
+
+#~ msgid "Error parsing MD5. Offset %lu"
+#~ msgstr "在解析 MD5 時發生錯誤。位移 %lu"
+
+#~ msgid "Couldn't change to %s"
+#~ msgstr "無法切換至 %s"
+
+#~ msgid "Failed to locate a valid control file"
+#~ msgstr "找不到可用的 control 檔"
+
+#~ msgid "Couldn't open pipe for %s"
+#~ msgstr "無法開啟管線給 %s 使用"
+
+#~ msgid "Read error from %s process"
+#~ msgstr "由 %s 程序讀取錯誤"
+
+#~ msgid "Got a single header line over %u chars"
+#~ msgstr "取得一個單行超過 %u 字元的標頭"
+
+#~ msgid "Malformed override %s line %lu #1"
+#~ msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #1"
+
+#~ msgid "Malformed override %s line %lu #2"
+#~ msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #2"
+
+#~ msgid "Malformed override %s line %lu #3"
+#~ msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #3"
#~ msgid "decompressor"
#~ msgstr "解壓縮程式"
+#~ msgid "read, still have %lu to read but none left"
+#~ msgstr "讀取，仍有 %lu 未讀但已無空間"
+
+#~ msgid "write, still have %lu to write but couldn't"
+#~ msgstr "寫入，仍有 %lu 待寫入但已沒辨法"
+
#~ msgid "Error occurred while processing %s (NewPackage)"
#~ msgstr "在處理 %s 時發生錯誤 (NewPackage)"
#~ msgid "Error occurred while processing %s (NewFileDesc2)"
#~ msgstr "在處理 %s 時發生錯誤 (NewFileDesc2)"
+#~ msgid "Error occurred while processing %s (FindPkg)"
+#~ msgstr "在處理 %s 時發生錯誤 (FindPkg)"
+
#~ msgid "Error occurred while processing %s (CollectFileProvides)"
#~ msgstr "在處理 %s 時發生錯誤 (CollectFileProvides)"
projects / apt.git / blobdiff