+#: apt_preferences.5.xml
+msgid ""
+"With a suitable &sources-list; file and the above preferences file, any of "
+"the following commands will cause APT to upgrade to the latest version(s) in "
+"the release codenamed with <literal>&debian-testing-codename;</literal>. "
+"<placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"Avec le fichier des préférences ci-dessus et un fichier &sources-list; "
+"adéquat, les commandes suivantes utiliseront les versions les plus récentes "
+"de <literal>&debian-testing-codename;</literal> pour faire la mise à "
+"niveau : <placeholder type=\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt_preferences.5.xml
+#, no-wrap
+msgid "apt-get install <replaceable>package</replaceable>/sid\n"
+msgstr "apt-get install <replaceable>paquet</replaceable>/sid\n"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt_preferences.5.xml
+msgid ""
+"The following command will cause APT to upgrade the specified package to the "
+"latest version from the <literal>sid</literal> distribution. Thereafter, "
+"<command>apt-get upgrade</command> will upgrade the package to the most "
+"recent <literal>&debian-testing-codename;</literal> version if that is more "
+"recent than the installed version, otherwise, to the most recent "
+"<literal>sid</literal> version if that is more recent than the installed "
+"version. <placeholder type=\"programlisting\" id=\"0\"/>"
+msgstr ""
+"La commande suivante utilisera la version la plus récente de la distribution "
+"<literal>sid</literal> pour mettre à niveau le paquet spécifié ; Par la "
+"suite, <command>apt-get upgrade</command> mettra le paquet à jour avec la "
+"plus récente version dans <literal>&debian-testing-codename;</literal> si "
+"elle est plus récente que la version installée ou avec la plus récente "
+"version dans <literal>sid</literal> si elle est plus récente que la version "
+"installée. <placeholder type=\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt_preferences.5.xml
+msgid "&apt-get; &apt-cache; &apt-conf; &sources-list;"
+msgstr "&apt-get; &apt-cache; &apt-conf; &sources-list;"
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: sources.list.5.xml
+msgid "List of configured APT data sources"
+msgstr "Liste des sources de données APT configurées"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The source list <filename>/etc/apt/sources.list</filename> is designed to "
+#| "support any number of active sources and a variety of source media. The "
+#| "file lists one source per line, with the most preferred source listed "
+#| "first. The information available from the configured sources is acquired "
+#| "by <command>apt-get update</command> (or by an equivalent command from "
+#| "another APT front-end)."
+msgid ""
+"The source list <filename>/etc/apt/sources.list</filename> and the files "
+"contained in <filename>/etc/apt/sources.list.d/</filename> are designed to "
+"support any number of active sources and a variety of source media. The "
+"files list one source per line (one-line style) or contain multiline stanzas "
+"defining one or more sources per stanza (deb822 style), with the most "
+"preferred source listed first (in case a single version is available from "
+"more than one source). The information available from the configured sources "
+"is acquired by <command>apt-get update</command> (or by an equivalent "
+"command from another APT front-end)."
+msgstr ""
+"Le fichier de liste de sources <filename>/etc/apt/sources.list</filename> "
+"est prévu pour pouvoir gérer un nombre quelconque de sources actives et de "
+"supports. Le fichier donne une source par ligne, avec les sources "
+"prioritaires en premier. L'information relative aux sources configurées est "
+"récupérée par la commande <command>apt-get update</command> (ou par une "
+"commande équivalent avec une autre interface à APT)."
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "sources.list.d"
+msgstr "sources.list.d"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The <filename>/etc/apt/sources.list.d</filename> directory provides a way "
+#| "to add sources.list entries in separate files. The format is the same as "
+#| "for the regular <filename>sources.list</filename> file. File names need "
+#| "to end with <filename>.list</filename> and may only contain letters (a-z "
+#| "and A-Z), digits (0-9), underscore (_), hyphen (-) and period (.) "
+#| "characters. Otherwise APT will print a notice that it has ignored a "
+#| "file, unless that file matches a pattern in the <literal>Dir::Ignore-"
+#| "Files-Silently</literal> configuration list - in which case it will be "
+#| "silently ignored."
+msgid ""
+"The <filename>/etc/apt/sources.list.d</filename> directory provides a way to "
+"add sources.list entries in separate files. Two different file formats are "
+"allowed as described in the next two sections. Filenames need to have "
+"either the extension <filename>.list</filename> or <filename>.sources</"
+"filename> depending on the contained format. The filenames may only contain "
+"letters (a-z and A-Z), digits (0-9), underscore (_), hyphen (-) and period "
+"(.) characters. Otherwise APT will print a notice that it has ignored a "
+"file, unless that file matches a pattern in the <literal>Dir::Ignore-Files-"
+"Silently</literal> configuration list - in which case it will be silently "
+"ignored."
+msgstr ""
+"Le répertoire <filename>/etc/apt/sources.list.d</filename> permet de "
+"spécifier des sources de paquets dans des fichiers distincts qui se "
+"terminent par <literal>.list</literal>. Leur format est le même que celui du "
+"fichier <filename>sources.list</filename>. Les noms de fichiers doivent se "
+"terminer par <filename>.list</filename> et ne peuvent contenir que des "
+"lettres (a-z et A-Z), des chiffres (0-9), des caractères de soulignement "
+"(_), des tirets et des points. Dans le cas contraire, APT affichera un "
+"avertissement indiquant qu'il a ignoré un fichier si celui-ci ne correspond "
+"par à un motif défini dans <literal>Dir::Ignore-Files-Silently</literal> "
+"(les fichiers correspondant à cette variable de configuration étant, eux, "
+"ignorés silencieusemennt)."
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "One-Line-Style Format"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Files in this format have the extension <filename>.list</filename>. Each "
+"line specifying a source starts with a type (e.g. <literal>deb-src</"
+"literal>) followed by options and arguments for this type. Individual "
+"entries cannot be continued onto a following line. Empty lines are ignored, "
+"and a <literal>#</literal> character anywhere on a line marks the remainder "
+"of that line as a comment. Consequently an entry can be disabled by "
+"commenting out the entire line. If options should be provided they are "
+"separated by spaces and all of them together are enclosed by square brackets "
+"(<literal>[]</literal>) included in the line after the type separated from "
+"it with a space. If an option allows multiple values these are separated "
+"from each other with a comma (<literal>,</literal>). An option name is "
+"separated from its value(s) by an equals sign (<literal>=</literal>). "
+"Multivalue options also have <literal>-=</literal> and <literal>+=</literal> "
+"as separators, which instead of replacing the default with the given "
+"value(s) modify the default value(s) to remove or include the given values."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"This is the traditional format and supported by all apt versions. Note that "
+"not all options as described below are supported by all apt versions. Note "
+"also that some older applications parsing this format on their own might not "
+"expect to encounter options as they were uncommon before the introduction of "
+"multi-architecture support."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+msgid "deb822-Style Format"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Files in this format have the extension <filename>.sources</filename>. The "
+"format is similar in syntax to other files used by Debian and its "
+"derivatives, such as the metadata files that apt will download from the "
+"configured sources or the <filename>debian/control</filename> file in a "
+"Debian source package. Individual entries are separated by an empty line; "
+"additional empty lines are ignored, and a <literal>#</literal> character at "
+"the start of the line marks the entire line as a comment. An entry can hence "
+"be disabled by commenting out each line belonging to the stanza, but it is "
+"usually easier to add the field \"Enabled: no\" to the stanza to disable the "
+"entry. Removing the field or setting it to yes reenables it. Options have "
+"the same syntax as every other field: A fieldname separated by a colon "
+"(<literal>:</literal>) and optionally spaces from its value(s). Note "
+"especially that multiple values are separated by spaces, not by commas as in "
+"the one-line format. Multivalue fields like <literal>Architectures</literal> "
+"also have <literal>Architectures-Add</literal> and <literal>Architectures-"
+"Remove</literal> to modify the default value rather than replacing it."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"This is a new format supported by apt itself since version 1.1. Previous "
+"versions ignore such files with a notice message as described earlier. It "
+"is intended to make this format gradually the default format, deprecating "
+"the previously described one-line-style format, as it is easier to create, "
+"extend and modify for humans and machines alike especially if a lot of "
+"sources and/or options are involved. Developers who are working with and/or "
+"parsing apt sources are highly encouraged to add support for this format and "
+"to contact the APT team to coordinate and share this work. Users can freely "
+"adopt this format already, but may encounter problems with software not "
+"supporting the format yet."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "The deb and deb-src types"
+msgid "The deb and deb-src Types: General Format"
+msgstr "Les types deb et deb-src."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The <literal>deb</literal> type references a typical two-level Debian "
+#| "archive, <filename>distribution/component</filename>. The "
+#| "<literal>distribution</literal> is generally an archive name like "
+#| "<literal>stable</literal> or <literal>testing</literal> or a codename "
+#| "like <literal>&debian-stable-codename;</literal> or <literal>&debian-"
+#| "testing-codename;</literal> while component is one of <literal>main</"
+#| "literal>, <literal>contrib</literal> or <literal>non-free</literal>. The "
+#| "<literal>deb-src</literal> type references a Debian distribution's source "
+#| "code in the same form as the <literal>deb</literal> type. A <literal>deb-"
+#| "src</literal> line is required to fetch source indexes."
+msgid ""
+"The <literal>deb</literal> type references a typical two-level Debian "
+"archive, <filename>distribution/component</filename>. The "
+"<literal>distribution</literal> is generally a suite name like "
+"<literal>stable</literal> or <literal>testing</literal> or a codename like "
+"<literal>&debian-stable-codename;</literal> or <literal>&debian-testing-"
+"codename;</literal> while component is one of <literal>main</literal>, "
+"<literal>contrib</literal> or <literal>non-free</literal>. The <literal>deb-"
+"src</literal> type references a Debian distribution's source code in the "
+"same form as the <literal>deb</literal> type. A <literal>deb-src</literal> "
+"line is required to fetch source indexes."
+msgstr ""
+"Le type <literal>deb</literal> décrit une archive Debian classique à deux "
+"niveaux, <filename>distribution/composant</filename>. <literal>distribution</"
+"literal> peut prendre l'une des valeurs suivantes : un nom d'archive tel que "
+"<literal>stable</literal> ou <literal>testing</literal> ou bien un nom de "
+"code comme <literal>&debian-stable-codename;</literal> ou <literal>&debian-"
+"testing-codename;</literal>, alors que composant prend les valeurs : "
+"<literal>main</literal>, <literal>contrib</literal> ou <literal>non-free</"
+"literal>. Le type <literal>deb-src</literal> décrit une archive de "
+"distribution de code source pour une distribution Debian dans le même format "
+"que le type <literal>deb</literal>. Une ligne <literal>deb-src</literal> est "
+"nécessaire pour récupérer les index des sources."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The format for a <filename>sources.list</filename> entry using the "
+#| "<literal>deb</literal> and <literal>deb-src</literal> types is:"
+msgid ""
+"The format for two one-line-style entries using the <literal>deb</literal> "
+"and <literal>deb-src</literal> types is:"
+msgstr ""
+"Le format d'une entrée dans <filename>sources.list</filename> utilisant les "
+"types <literal>deb</literal> et <literal>deb-src</literal> est :"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"deb [ option1=value1 option2=value2 ] uri suite [component1] [component2] [...]\n"
+"deb-src [ option1=value1 option2=value2 ] uri suite [component1] [component2] [...]"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+" Types: deb deb-src\n"
+" URIs: uri\n"
+" Suites: suite\n"
+" Components: [component1] [component2] [...]\n"
+" option1: value1\n"
+" option2: value2\n"
+" "
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "Alternatively a rfc822 style format is also supported: <placeholder type="
+#| "\"literallayout\" id=\"0\"/>"
+msgid ""
+"Alternatively the equivalent entry in deb822 style looks like this: "
+"<placeholder type=\"literallayout\" id=\"0\"/>"
+msgstr ""
+"Autrement, un autre format de style rfc822 est aussi géré : <placeholder "
+"type=\"literallayout\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "The URI for the <literal>deb</literal> type must specify the base of the "
+#| "Debian distribution, from which APT will find the information it needs. "
+#| "<literal>suite</literal> can specify an exact path, in which case the "
+#| "components must be omitted and <literal>suite</literal> must end with a "
+#| "slash (<literal>/</literal>). This is useful for the case when only a "
+#| "particular sub-section of the archive denoted by the URI is of interest. "
+#| "If <literal>suite</literal> does not specify an exact path, at least one "
+#| "<literal>component</literal> must be present."
+msgid ""
+"The URI for the <literal>deb</literal> type must specify the base of the "
+"Debian distribution, from which APT will find the information it needs. "
+"<literal>suite</literal> can specify an exact path, in which case the "
+"components must be omitted and <literal>suite</literal> must end with a "
+"slash (<literal>/</literal>). This is useful for the case when only a "
+"particular sub-directory of the archive denoted by the URI is of interest. "
+"If <literal>suite</literal> does not specify an exact path, at least one "
+"<literal>component</literal> must be present."
+msgstr ""
+"L'URI de type <literal>deb</literal> doit indiquer la base de la "
+"distribution Debian dans laquelle APT trouvera les informations dont il a "
+"besoin. <literal>suite</literal> peut spécifier le chemin exact : dans ce "
+"cas, on doit omettre les composants et <literal>suite</literal> doit se "
+"terminer par une barre oblique (<literal>/</literal>). C'est utile quand "
+"seule une sous-section particulière de l'archive décrite par cet URI est "
+"intéressante. Quand <literal>suite</literal> n'indique pas un chemin exact, "
+"un <literal>composant</literal> au moins doit être présent."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>suite</literal> may also contain a variable, <literal>$(ARCH)</"
+#| "literal> which expands to the Debian architecture (such as "
+#| "<literal>amd64</literal> or <literal>armel</literal>) used on the system. "
+#| "This permits architecture-independent <filename>sources.list</filename> "
+#| "files to be used. In general this is only of interest when specifying an "
+#| "exact path, <literal>APT</literal> will automatically generate a URI with "
+#| "the current architecture otherwise."
+msgid ""
+"<literal>suite</literal> may also contain a variable, <literal>$(ARCH)</"
+"literal> which expands to the Debian architecture (such as <literal>amd64</"
+"literal> or <literal>armel</literal>) used on the system. This permits "
+"architecture-independent <filename>sources.list</filename> files to be used. "
+"In general this is only of interest when specifying an exact path; "
+"<literal>APT</literal> will automatically generate a URI with the current "
+"architecture otherwise."
+msgstr ""
+"<literal>suite</literal> peut aussi contenir une variable <literal>$(ARCH)</"
+"literal>, qui sera remplacée par l'architecture Debian (comme "
+"<literal>amd64</literal> ou <literal>armel</literal>) sur laquelle s'exécute "
+"le système. On peut ainsi utiliser un fichier <filename>sources.list</"
+"filename> qui ne dépend pas d'une architecture. En général, ce n'est "
+"intéressant que si l'on indique un chemin exact ; sinon <literal>APT</"
+"literal> crée automatiquement un URI en fonction de l'architecture effective."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "In the traditional style sources.list format since only one distribution "
+#| "can be specified per line it may be necessary to have multiple lines for "
+#| "the same URI, if a subset of all available distributions or components at "
+#| "that location is desired. APT will sort the URI list after it has "
+#| "generated a complete set internally, and will collapse multiple "
+#| "references to the same Internet host, for instance, into a single "
+#| "connection, so that it does not inefficiently establish an FTP "
+#| "connection, close it, do something else, and then re-establish a "
+#| "connection to that same host. This feature is useful for accessing busy "
+#| "FTP sites with limits on the number of simultaneous anonymous users. APT "
+#| "also parallelizes connections to different hosts to more effectively deal "
+#| "with sites with low bandwidth."
+msgid ""
+"Especially in the one-line-style format since only one distribution can be "
+"specified per line it may be necessary to have multiple lines for the same "
+"URI, if a subset of all available distributions or components at that "
+"location is desired. APT will sort the URI list after it has generated a "
+"complete set internally, and will collapse multiple references to the same "
+"Internet host, for instance, into a single connection, so that it does not "
+"inefficiently establish a connection, close it, do something else, and then "
+"re-establish a connection to that same host. APT also parallelizes "
+"connections to different hosts to more effectively deal with sites with low "
+"bandwidth."
+msgstr ""
+"Lorsqu'on utilise le type de style de sources.list traditionnel, puisqu'on "
+"ne peut indiquer qu'une seule distribution par ligne, il peut être "
+"nécessaire de disposer le même URI sur plusieurs lignes quand on veut "
+"accéder à un sous-ensemble des distributions ou composants disponibles à "
+"cette adresse. APT trie les URI après avoir crée pour lui-même la liste "
+"complète ; il regroupe les références multiples au même hôte Internet en vue "
+"d'une connexion unique et il évite ainsi, par exemple, d'établir une "
+"connexion FTP, de la fermer, faire autre chose, puis d'établir encore cette "
+"connexion. Cette fonctionnalité permet l'accès à des sites FTP surchargés "
+"qui limitent le nombre de connexions simultanées pour les utilisateurs "
+"anonymes. APT parallélise aussi les connexions à différents hôtes pour "
+"tirer plus efficacement parti des sites à faible bande passante."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"It is important to list sources in order of preference, with the most "
+"preferred source listed first. Typically this will result in sorting by "
+"speed from fastest to slowest (CD-ROM followed by hosts on a local network, "
+"followed by distant Internet hosts, for example)."
+msgstr ""
+"Il est important d'indiquer les sources par ordre de préférence, la source "
+"principale apparaissant en premier. Un tri est fait, de la plus rapide à la "
+"plus lente ; par exemple, un CD suivi par les hôtes d'un réseau local, puis "
+"les hôtes distants."
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "&sourceslist-list-format;"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "&sourceslist-sources-format;"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"As an example, the sources for your distribution could look like this in one-"
+"line-style format: <placeholder type=\"literallayout\" id=\"0\"/> or like "
+"this in deb822 style format: <placeholder type=\"literallayout\" id=\"1\"/>"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "The deb and deb-src types"
+msgid "The deb and deb-src types: Options"
+msgstr "Les types deb et deb-src."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Each source entry can have options specified to modify which source is "
+"accessed and how data is acquired from it. Format, syntax and names of the "
+"options vary between the one-line-style and deb822-style formats as "
+"described, but they both have the same options available. For simplicity we "
+"list the deb822 fieldname and provide the one-line name in brackets. "
+"Remember that besides setting multivalue options explicitly, there is also "
+"the option to modify them based on the default, but we aren't listing those "
+"names explicitly here. Unsupported options are silently ignored by all APT "
+"versions."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+#| "replaceable>,…</literal> can be used to specify for which architectures "
+#| "information should be downloaded. If this option is not set all "
+#| "architectures defined by the <literal>APT::Architectures</literal> option "
+#| "will be downloaded."
+msgid ""
+"<option>Architectures</option> (<option>arch</option>) is a multivalue "
+"option defining for which architectures information should be downloaded. If "
+"this option isn't set the default is all architectures as defined by the "
+"<option>APT::Architectures</option> config option."
+msgstr ""
+"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+"replaceable>,…</literal> peut être utilisé pour indiquer les architectures "
+"pour lesquelles l'information doit être téléchargée. Si cette option n'est "
+"pas utilisée, toutes les architectures définies par l'option <literal>APT::"
+"Architectures</literal> sera téléchargée."
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+#| "replaceable>,…</literal> can be used to specify for which architectures "
+#| "information should be downloaded. If this option is not set all "
+#| "architectures defined by the <literal>APT::Architectures</literal> option "
+#| "will be downloaded."
+msgid ""
+"<option>Languages</option> (<option>lang</option>) is a multivalue option "
+"defining for which languages information such as translated package "
+"descriptions should be downloaded. If this option isn't set the default is "
+"all languages as defined by the <option>Acquire::Languages</option> config "
+"option."
+msgstr ""
+"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+"replaceable>,…</literal> peut être utilisé pour indiquer les architectures "
+"pour lesquelles l'information doit être téléchargée. Si cette option n'est "
+"pas utilisée, toutes les architectures définies par l'option <literal>APT::"
+"Architectures</literal> sera téléchargée."
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Targets</option> (<option>target</option>) is a multivalue option "
+"defining which download targets apt will try to acquire from this source. If "
+"not specified, the default set is defined by the <option>Acquire::"
+"IndexTargets</option> configuration scope (targets are specified by their "
+"name in the <literal>Created-By</literal> field). Additionally, targets can "
+"be enabled or disabled by using the <literal>Identifier</literal> field as "
+"an option with a boolean value instead of using this multivalue option."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>PDiffs</option> (<option>pdiffs</option>) is a yes/no value which "
+"controls if APT should try to use PDiffs to update old indexes instead of "
+"downloading the new indexes entirely. The value of this option is ignored if "
+"the repository doesn't announce the availability of PDiffs. Defaults to the "
+"value of the option with the same name for a specific index file defined in "
+"the <option>Acquire::IndexTargets</option> scope, which itself defaults to "
+"the value of configuration option <option>Acquire::PDiffs</option> which "
+"defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>By-Hash</option> (<option>by-hash</option>) can have the value "
+"<literal>yes</literal>, <literal>no</literal> or <literal>force</literal> "
+"and controls if APT should try to acquire indexes via a URI constructed from "
+"a hashsum of the expected file instead of using the well-known stable "
+"filename of the index. Using this can avoid hashsum mismatches, but requires "
+"a supporting mirror. A <literal>yes</literal> or <literal>no</literal> value "
+"activates/disables the use of this feature if this source indicates support "
+"for it, while <literal>force</literal> will enable the feature regardless of "
+"what the source indicates. Defaults to the value of the option of the same "
+"name for a specific index file defined in the <option>Acquire::IndexTargets</"
+"option> scope, which itself defaults to the value of configuration option "
+"<option>Acquire::By-Hash</option> which defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Furthermore, there are options which if set affect <emphasis>all</emphasis> "
+"sources with the same URI and Suite, so they have to be set on all such "
+"entries and can not be varied between different components. APT will try to "
+"detect and error out on such anomalies."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Allow-Insecure</option> (<option>allow-insecure</option>), "
+"<option>Allow-Weak</option> (<option>allow-weak</option>) and <option>Allow-"
+"Downgrade-To-Insecure</option> (<option>allow-downgrade-to-insecure</"
+"option>) are boolean values which all default to <literal>no</literal>. If "
+"set to <literal>yes</literal> they circumvent parts of &apt-secure; and "
+"should therefore not be used lightly!"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Trusted</option> (<option>trusted</option>) is a tri-state value "
+"which defaults to APT deciding if a source is considered trusted or if "
+"warnings should be raised before e.g. packages are installed from this "
+"source. This option can be used to override that decision. The value "
+"<literal>yes</literal> tells APT always to consider this source as trusted, "
+"even if it doesn't pass authentication checks. It disables parts of &apt-"
+"secure;, and should therefore only be used in a local and trusted context "
+"(if at all) as otherwise security is breached. The value <literal>no</"
+"literal> does the opposite, causing the source to be handled as untrusted "
+"even if the authentication checks passed successfully. The default value "
+"can't be set explicitly."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Signed-By</option> (<option>signed-by</option>) is either an "
+"absolute path to a keyring file (has to be accessible and readable for the "
+"<literal>_apt</literal> user, so ensure everyone has read-permissions on the "
+"file) or one or more fingerprints of keys either in the <filename>trusted."
+"gpg</filename> keyring or in the keyrings in the <filename>trusted.gpg.d/</"
+"filename> directory (see <command>apt-key fingerprint</command>). If the "
+"option is set, only the key(s) in this keyring or only the keys with these "
+"fingerprints are used for the &apt-secure; verification of this repository. "
+"Defaults to the value of the option with the same name if set in the "
+"previously acquired <filename>Release</filename> file. Otherwise all keys "
+"in the trusted keyrings are considered valid signers for this repository."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Check-Valid-Until</option> (<option>check-valid-until</option>) is "
+"a yes/no value which controls if APT should try to detect replay attacks. A "
+"repository creator can declare a time until which the data provided in the "
+"repository should be considered valid, and if this time is reached, but no "
+"new data is provided, the data is considered expired and an error is "
+"raised. Besides increasing security, as a malicious attacker can't send old "
+"data forever to prevent a user from upgrading to a new version, this also "
+"helps users identify mirrors which are no longer updated. However, some "
+"repositories such as historic archives are not updated any more by design, "
+"so this check can be disabled by setting this option to <literal>no</"
+"literal>. Defaults to the value of configuration option <option>Acquire::"
+"Check-Valid-Until</option> which itself defaults to <literal>yes</literal>."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"<option>Valid-Until-Min</option> (<option>valid-until-min</option>) and "
+"<option>Valid-Until-Max</option> (<option>valid-until-max</option>) can be "
+"used to raise or lower the time period in seconds in which the data from "
+"this repository is considered valid. -Max can be especially useful if the "
+"repository provides no Valid-Until field on its Release file to set your own "
+"value, while -Min can be used to increase the valid time on seldom updated "
+"(local) mirrors of a more frequently updated but less accessible archive "
+"(which is in the sources.list as well) instead of disabling the check "
+"entirely. Default to the value of the configuration options "
+"<option>Acquire::Min-ValidTime</option> and <option>Acquire::Max-ValidTime</"
+"option> which are both unset by default."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><title>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "URI specification"
+msgid "URI Specification"
+msgstr "Spécification des URI"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid "The currently recognized URI types are:"
+msgstr "Les types d'URI actuellement reconnues sont :"
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The file scheme allows an arbitrary directory in the file system to be "
+"considered an archive. This is useful for NFS mounts and local mirrors or "
+"archives."
+msgstr ""
+"Le procédé <literal>file</literal> permet qu'un répertoire arbitraire au "
+"sein du système de fichier soit considéré comme une archive. On s'en sert "
+"avec les montages NFS, les miroirs et les archives locaux."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The cdrom scheme allows APT to use a local CD-ROM drive with media swapping. "
+"Use the &apt-cdrom; program to create cdrom entries in the source list."
+msgstr ""
+"Le procédé <literal>cdrom</literal> permet l'utilisation d'un lecteur de CD "
+"avec la possibilité de changer de media. Utilisez le programme &apt-cdrom; "
+"pour créer des entrées dans la liste des sources."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The http scheme specifies an HTTP server for the archive. If an environment "
+"variable <envar>http_proxy</envar> is set with the format http://server:"
+"port/, the proxy server specified in <envar>http_proxy</envar> will be used. "
+"Users of authenticated HTTP/1.1 proxies may use a string of the format "
+"http://user:pass@server:port/. Note that this is an insecure method of "
+"authentication."
+msgstr ""
+"Le procédé <literal>http</literal> indique un serveur HTTP comme archive. Si "
+"une variable d'environnement <envar>http_proxy</envar> (au format http://"
+"server:port/) existe, le serveur mandataire indiqué par <envar>http_proxy</"
+"envar> est utilisé. Quand un serveur mandataire HTTP/1.1 demande une "
+"authentification, on peut utiliser la chaîne http://user:pass@server:port/. "
+"Notez qu'il s'agit d'une méthode d'authentification peu sûre."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The ftp scheme specifies an FTP server for the archive. APT's FTP behavior "
+"is highly configurable; for more information see the &apt-conf; manual page. "
+"Please note that an FTP proxy can be specified by using the "
+"<envar>ftp_proxy</envar> environment variable. It is possible to specify an "
+"HTTP proxy (HTTP proxy servers often understand FTP URLs) using this "
+"environment variable and <emphasis>only</emphasis> this environment "
+"variable. Proxies using HTTP specified in the configuration file will be "
+"ignored."
+msgstr ""
+"Le procédé <literal>ftp</literal> indique un serveur FTP comme archive. Le "
+"fonctionnement en mode ftp est largement configurable ; référez-vous à la "
+"page de manuel de &apt-cdrom; pour d'autres informations. On remarquera "
+"qu'on peut indiquer un mandataire FTP avec la variable d'environnement "
+"<envar>ftp_proxy</envar>. On peut aussi spécifier un mandataire HTTP (les "
+"serveurs mandataires HTTP comprennent souvent les URL FTP) en utilisant "
+"cette méthode et <emphasis>seulement</emphasis> cette méthode. Les "
+"mandataires qui utilisent HTTP et qui sont spécifiés dans le fichier de "
+"configuration seront ignorés."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The copy scheme is identical to the file scheme except that packages are "
+"copied into the cache directory instead of used directly at their location. "
+"This is useful for people using removable media to copy files around with "
+"APT."
+msgstr ""
+"Le procédé <literal>copy</literal> est identique au procédé <literal>file</"
+"literal> excepté que les paquets sont copiés dans le cache du répertoire au "
+"lieu d'être utilisés directement depuis leur emplacement. Ce réglage peut "
+"servir aux utilisateurs qui se servent d'un support amovible pour recopier "
+"des fichiers avec APT."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"The rsh/ssh method invokes RSH/SSH to connect to a remote host and access "
+"the files as a given user. Prior configuration of rhosts or RSA keys is "
+"recommended. The standard <command>find</command> and <command>dd</command> "
+"commands are used to perform the file transfers from the remote host."
+msgstr ""
+"Le procédé rsh/ssh utilise rsh/ssh pour se connecter à une machine distante "
+"et pour accéder aux fichiers en tant qu'un certain utilisateur. Il est "
+"recommandé de régler préalablement les hôtes distants (rhosts) ou les clés "
+"RSA. Les commandes standard <command>find</command> et <command>dd</command> "
+"sont utilisées pour l'accès aux fichiers de la machine distante."
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
+#: sources.list.5.xml
+msgid "adding more recognizable URI types"
+msgstr "ajout de types d'URI supplémentaires reconnues"
+
+#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
+#: sources.list.5.xml
+msgid ""
+"APT can be extended with more methods shipped in other optional packages, "
+"which should follow the naming scheme <package>apt-transport-"
+"<replaceable>method</replaceable></package>. For instance, the APT team "
+"also maintains the package <package>apt-transport-https</package>, which "
+"provides access methods for HTTPS URIs with features similar to the http "
+"method. Methods for using e.g. debtorrent are also available - see &apt-"
+"transport-debtorrent;."
+msgstr ""
+"APT peut être complété avec des méthodes supplémentaires fournies par des "
+"paquets optionnels dont le schéma de nommage est <literal>apt-transport-"
+"<replaceable>méthode</replaceable></literal>. Ainsi, l'équipe de "
+"maintenance d'APT gère un paquet <literal>apt-transport-https</literal> qui "
+"gère les accès par URI de type https, avec des fonctionnalités analogues à "
+"la méthode http. D'autres méthodes telles que debtorrent sont aussi "
+"disponibles (voir &apt-transport-debtorrent;)."
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "Uses the archive stored locally (or NFS mounted) at /home/jason/debian "
+#| "for stable/main, stable/contrib, and stable/non-free."
+msgid ""
+"Uses the archive stored locally (or NFS mounted) at /home/apt/debian for "
+"stable/main, stable/contrib, and stable/non-free."
+msgstr ""
+"Utiliser l'archive stockée localement (ou montée via NFS) dans /home/jason/"
+"debian pour stable/main, stable/contrib et stable/non-free."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb file:/home/jason/debian stable main contrib non-free"
+msgid "deb file:/home/apt/debian stable main contrib non-free"
+msgstr "deb file:/home/jason/debian stable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb file:/home/jason/debian stable main contrib non-free"
+msgid ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: stable\n"
+"Components: main contrib non-free"
+msgstr "deb file:/home/jason/debian stable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid "As above, except this uses the unstable (development) distribution."
+msgstr ""
+"Comme ci-dessus, excepté que cette ligne utilise la distribution "
+"« unstable » (développement)."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb file:/home/jason/debian unstable main contrib non-free"
+msgid "deb file:/home/apt/debian unstable main contrib non-free"
+msgstr "deb file:/home/jason/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb file:/home/jason/debian unstable main contrib non-free"
+msgid ""
+"Types: deb\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
+msgstr "deb file:/home/jason/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "Source line for the above"
+msgid "Sources specification for the above."
+msgstr "La précédente ligne, mais pour les sources."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb-src file:/home/jason/debian unstable main contrib non-free"
+msgid "deb-src file:/home/apt/debian unstable main contrib non-free"
+msgstr "deb-src file:/home/jason/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb-src file:/home/jason/debian unstable main contrib non-free"
+msgid ""
+"Types: deb-src\n"
+"URIs: file:/home/apt/debian\n"
+"Suites: unstable\n"
+"Components: main contrib non-free"
+msgstr "deb-src file:/home/jason/debian unstable main contrib non-free"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"The first line gets package information for the architectures in "
+"<literal>APT::Architectures</literal> while the second always retrieves "
+"<literal>amd64</literal> and <literal>armel</literal>."
+msgstr ""
+"La première ligne récupère l'information des paquets pour les architectures "
+"de <literal>APT::Architectures</literal> alors que la deuxième récupère "
+"<literal>amd64</literal> et <literal>armel</literal>."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid ""
+#| "deb http://ftp.debian.org/debian &debian-stable-codename; main\n"
+#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main"
+msgid ""
+"deb http://deb.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://deb.debian.org/debian &debian-stable-codename; main"
+msgstr ""
+"deb http://ftp.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid ""
+#| "deb http://ftp.debian.org/debian &debian-stable-codename; main\n"
+#| "deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main"
+msgid ""
+"Types: deb\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: main\n"
+"\n"
+"Types: deb\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: main\n"
+"Architectures: amd64 armel\n"
+msgstr ""
+"deb http://ftp.debian.org/debian &debian-stable-codename; main\n"
+"deb [ arch=amd64,armel ] http://ftp.debian.org/debian &debian-stable-codename; main"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses HTTP to access the archive at archive.debian.org, and uses only the "
+"hamm/main area."
+msgstr ""
+"Utiliser HTTP pour accéder à l'archive située à archive.debian.org, et "
+"n'utiliser que la section hamm/main."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb http://archive.debian.org/debian-archive hamm main"
+msgstr "deb http://archive.debian.org/debian-archive hamm main"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb http://archive.debian.org/debian-archive hamm main"
+msgid ""
+"Types: deb\n"
+"URIs: http://archive.debian.org/debian-archive\n"
+"Suites: hamm\n"
+"Components: main"
+msgstr "deb http://archive.debian.org/debian-archive hamm main"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses FTP to access the archive at ftp.debian.org, under the debian "
+"directory, and uses only the &debian-stable-codename;/contrib area."
+msgstr ""
+"Utiliser FTP pour accéder à l'archive située à ftp.debian.org, dans le "
+"répertoire debian, et n'utiliser que la section &debian-stable-codename;/"
+"contrib."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib"
+msgstr "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib"
+msgid ""
+"Types: deb\n"
+"URIs: ftp://ftp.debian.org/debian\n"
+"Suites: &debian-stable-codename;\n"
+"Components: contrib"
+msgstr "deb ftp://ftp.debian.org/debian &debian-stable-codename; contrib"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses FTP to access the archive at ftp.debian.org, under the debian "
+"directory, and uses only the unstable/contrib area. If this line appears as "
+"well as the one in the previous example in <filename>sources.list</filename> "
+"a single FTP session will be used for both resource lines."
+msgstr ""
+"Utiliser FTP pour accéder à l'archive située à ftp.debian.org, dans le "
+"répertoire debian, et n'utiliser que la section unstable/contrib. Si cette "
+"ligne et celle de l'exemple précédent dans <filename>sources.list</filename> "
+"apparaissent, une seule session FTP sera utilisée pour les deux lignes."
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb ftp://ftp.debian.org/debian unstable contrib"
+msgstr "deb ftp://ftp.debian.org/debian unstable contrib"
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb ftp://ftp.debian.org/debian unstable contrib"
+msgid ""
+"Types: deb\n"
+"URIs: ftp://ftp.debian.org/debian\n"
+"Suites: unstable\n"
+"Components: contrib"
+msgstr "deb ftp://ftp.debian.org/debian unstable contrib"
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+msgstr "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+
+#. type: Content of: <refentry><refsect1><para><literallayout>
+#: sources.list.5.xml
+#, fuzzy, no-wrap
+#| msgid "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+msgid ""
+"Types: deb\n"
+"URIs: http://ftp.tlh.debian.org/universe\n"
+"Suites: unstable/binary-$(ARCH)/"
+msgstr "deb http://ftp.tlh.debian.org/universe unstable/binary-$(ARCH)/"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid ""
+#| "Uses HTTP to access the archive at ftp.tlh.debian.org, under the universe "
+#| "directory, and uses only files found under <filename>unstable/binary-"
+#| "i386</filename> on i386 machines, <filename>unstable/binary-amd64</"
+#| "filename> on amd64, and so forth for other supported architectures. [Note "
+#| "this example only illustrates how to use the substitution variable; "
+#| "official debian archives are not structured like this] <placeholder type="
+#| "\"literallayout\" id=\"0\"/>"
+msgid ""
+"Uses HTTP to access the archive at ftp.tlh.debian.org, under the universe "
+"directory, and uses only files found under <filename>unstable/binary-i386</"
+"filename> on i386 machines, <filename>unstable/binary-amd64</filename> on "
+"amd64, and so forth for other supported architectures. [Note this example "
+"only illustrates how to use the substitution variable; official debian "
+"archives are not structured like this] <placeholder type=\"literallayout\" "
+"id=\"0\"/> <placeholder type=\"literallayout\" id=\"1\"/>"
+msgstr ""
+"Utiliser HTTP pour accéder à l'archive située à ftp.tlh.debian.org, dans le "
+"répertoire universe, et n'utiliser que les fichiers trouvés dans "
+"<filename>unstable/binary-i386</filename> pour les machines i386, dans "
+"<filename>unstable/binary-amd64</filename> pour les machines amd64 et ainsi "
+"de suite pour les autres architectures reconnues. [Notez que cet exemple "
+"montre seulement la manière d'utiliser la variable à substituer, les "
+"archives Debian n'étant plas structurées de cette manière.] <placeholder "
+"type=\"literallayout\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+msgid ""
+"Uses HTTP to get binary packages as well as sources from the stable, testing "
+"and unstable suites and the components main and contrib."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"deb http://deb.debian.org/debian stable main contrib\n"
+"deb-src http://deb.debian.org/debian stable main contrib\n"
+"deb http://deb.debian.org/debian testing main contrib\n"
+"deb-src http://deb.debian.org/debian testing main contrib\n"
+"deb http://deb.debian.org/debian unstable main contrib\n"
+"deb-src http://deb.debian.org/debian unstable main contrib"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><literallayout>
+#: sources.list.5.xml
+#, no-wrap
+msgid ""
+"Types: deb deb-src\n"
+"URIs: http://deb.debian.org/debian\n"
+"Suites: stable testing unstable\n"
+"Components: main contrib\n"
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><para>
+#: sources.list.5.xml
+#, fuzzy
+#| msgid "&apt-cache;, &apt-config;, &apt-preferences;."
+msgid "&apt-get;, &apt-conf;, &apt-acquire-additional-files;"
+msgstr "&apt-cache;, &apt-config;, &apt-preferences;."
+
+#. type: Content of: <refentry><refmeta><manvolnum>
+#: apt-extracttemplates.1.xml apt-sortpkgs.1.xml apt-ftparchive.1.xml
+msgid "1"
+msgstr "1"
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-extracttemplates.1.xml
+msgid ""
+"Utility to extract <command>debconf</command> config and templates from "
+"Debian packages"
+msgstr ""
+"Outil d'extraction des textes et fichiers de configuration pour "
+"<command>debconf</command> contenu dans un paquet Debian"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml
+msgid ""
+"<command>apt-extracttemplates</command> will take one or more Debian package "
+"files as input and write out (to a temporary directory) all associated "
+"config scripts and template files. For each passed in package that contains "
+"config scripts and templates, one line of output will be generated in the "
+"format:"
+msgstr ""
+"<command>Apt-extracttemplates</command> prend un ou plusieurs paquets Debian "
+"en paramètre et extrait (dans un répertoire temporaire) tous les scripts et "
+"guides de configuration associés. Pour chaque paquet traité contenant des "
+"scripts et guides de configuration, une ligne est affichée au format "
+"suivant :"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml
+msgid "package version template-file config-script"
+msgstr "paquet version guide-de-configuration script-de-configuration"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml
+msgid ""
+"template-file and config-script are written to the temporary directory "
+"specified by the <option>-t</option> or <option>--tempdir</option> "
+"(<literal>APT::ExtractTemplates::TempDir</literal>) directory, with "
+"filenames of the form <filename>package.template.XXXXXX</filename> and "
+"<filename>package.config.XXXXXX</filename>"
+msgstr ""
+"Les scripts et guides de configuration sont écrits dans le répertoire "
+"temporaire indiqué par l'option <option>-t</option> ou <option>--tempdir</"
+"option> (<literal>APT::ExtractTemplates::TempDir</literal>) ; les noms de "
+"fichier sont de la forme <filename>package.template.XXXXXX</filename> ou "
+"<filename>package.config.XXXXXX</filename>."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-extracttemplates.1.xml
+msgid ""
+"Temporary directory in which to write extracted <command>debconf</command> "
+"template files and config scripts. Configuration Item: <literal>APT::"
+"ExtractTemplates::TempDir</literal>"
+msgstr ""
+"Répertoire temporaire dans lequel écrire les scripts de configuration et "
+"modèles d'écrans pour <command>debconf</command>. Élément de configuration : "
+"<literal>APT::ExtractTemplates::TempDir</literal>."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-extracttemplates.1.xml
+msgid ""
+"<command>apt-extracttemplates</command> returns zero on normal operation, "
+"decimal 100 on error."
+msgstr ""
+"<command>apt-extracttemplates</command> retourne zéro si tout se passe bien, "
+"le nombre 100 en cas d'erreur."
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-sortpkgs.1.xml
+msgid "Utility to sort package index files"
+msgstr "Outil de tri des index de paquets."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-sortpkgs.1.xml
+msgid ""
+"<command>apt-sortpkgs</command> will take an index file (source index or "
+"package index) and sort the records so that they are ordered by the package "
+"name. It will also sort the internal fields of each record according to the "
+"internal sorting rules."
+msgstr ""
+"<command>Apt-sortpkgs</command> prend un index (un index de Source ou un "
+"index de paquet) et trie leurs enregistrements selon le nom de paquet. Un "
+"tri des champs de chaque enregistrement est réalisé selon des règles "
+"internes."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-sortpkgs.1.xml
+msgid ""
+"All output is sent to standard output; the input must be a seekable file."
+msgstr ""
+"Le résultat est envoyé sur la sortie standard ; l'entrée doit être un "
+"fichier analysable."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-sortpkgs.1.xml
+msgid ""
+"Use source index field ordering. Configuration Item: <literal>APT::"
+"SortPkgs::Source</literal>."
+msgstr ""
+"Utiliser un index de sources pour le tri des champs. Élément de "
+"configuration : <literal>APT::SortPkgs::Source</literal>."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-sortpkgs.1.xml
+msgid ""
+"<command>apt-sortpkgs</command> returns zero on normal operation, decimal "
+"100 on error."
+msgstr ""
+"<command>apt-sortpkgs</command> retourne zéro si tout se passe bien ou 100 "
+"en cas d'erreur."
+
+#. type: Content of: <refentry><refnamediv><refpurpose>
+#: apt-ftparchive.1.xml
+msgid "Utility to generate index files"
+msgstr "Outil de création de fichiers d'index"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"<command>apt-ftparchive</command> is the command line tool that generates "
+"the index files that APT uses to access a distribution source. The index "
+"files should be generated on the origin site based on the content of that "
+"site."
+msgstr ""
+"<command>apt-ftparchive</command> est l'outil en ligne de commande qui crée "
+"les index dont APT se sert pour accéder aux sources des distributions. Un "
+"index doit être créé pour un site et basé sur le contenu de ce site."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"<command>apt-ftparchive</command> is a superset of the &dpkg-scanpackages; "
+"program, incorporating its entire functionality via the <literal>packages</"
+"literal> command. It also contains a contents file generator, "
+"<literal>contents</literal>, and an elaborate means to 'script' the "
+"generation process for a complete archive."
+msgstr ""
+"<command>apt-ftparchive</command> est un ensemble comprenant le programme "
+"&dpkg-scanpackages; et toutes ses fonctionnalités via la commande "
+"<literal>packages</literal> ; il comprend aussi un générateur de fichier "
+"« Contents », la commande <literal>contents</literal>, et une technique "
+"élaborée pour automatiser le processus de création d'une archive complète."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Internally <command>apt-ftparchive</command> can make use of binary "
+"databases to cache the contents of a .deb file and it does not rely on any "
+"external programs aside from &gzip;. When doing a full generate it "
+"automatically performs file-change checks and builds the desired compressed "
+"output files."
+msgstr ""
+"<command>Apt-ftparchive</command> peut utiliser lui-même des bases de "
+"données binaires pour « cacher » le contenu d'un fichier .deb ; il n'a pas "
+"besoin de programmes extérieurs, sauf &gzip;. Lors d'une exécution, il "
+"vérifie les changements dans les fichiers et crée les fichiers compressés "
+"voulus."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The packages command generates a package file from a directory tree. It "
+"takes the given directory and recursively searches it for .deb files, "
+"emitting a package record to stdout for each. This command is approximately "
+"equivalent to &dpkg-scanpackages;."
+msgstr ""
+"La commande packages crée un fichier « Packages » à partir d'une "
+"arborescence. Elle recherche récursivement à travers le répertoire donné les "
+"fichiers .deb et, pour chaque fichier trouvé, envoie une entrée pour ce "
+"paquet sur la sortie standard. Cette commande est approximativement "
+"équivalente à &dpkg-scanpackages;."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The option <option>--db</option> can be used to specify a binary caching DB."
+msgstr ""
+"On peut se servir de l'option <option>--db</option> pour demander un cache "
+"binaire."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>sources</literal> command generates a source index file from a "
+"directory tree. It takes the given directory and recursively searches it "
+"for .dsc files, emitting a source record to stdout for each. This command is "
+"approximately equivalent to &dpkg-scansources;."
+msgstr ""
+"La commande <literal>sources</literal> crée un index des sources à partir "
+"d'une arborescence. Elle recherche récursivement à travers le répertoire "
+"donné les fichiers .dsc et, pour chaque fichier trouvé, envoie une entrée "
+"pour ce paquet sur la sortie standard. Cette commande est approximativement "
+"équivalente à &dpkg-scansources;."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"If an override file is specified then a source override file will be looked "
+"for with an extension of .src. The --source-override option can be used to "
+"change the source override file that will be used."
+msgstr ""
+"Quand on précise un fichier « override », c'est un fichier source avec une "
+"extension .src qui est recherché. On peut se servir de l'option --source-"
+"override pour changer de fichier source d'« override »."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>contents</literal> command generates a contents file from a "
+"directory tree. It takes the given directory and recursively searches it "
+"for .deb files, and reads the file list from each file. It then sorts and "
+"writes to stdout the list of files matched to packages. Directories are not "
+"written to the output. If multiple packages own the same file then each "
+"package is separated by a comma in the output."
+msgstr ""
+"La commande <literal>contents</literal> crée un fichier « Contents » à "
+"partir d'une arborescence. Elle recherche récursivement à travers le "
+"répertoire donné les fichiers .deb et, pour chaque fichier trouvé, lit la "
+"liste des fichiers. Elle trie la liste des fichiers correspondant à des "
+"paquets et l'envoie sur la sortie standard. Les répertoires ne font pas "
+"partie du résultat. Quand un fichier appartient à plusieurs paquets, une "
+"virgule sépare les paquets."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "The <literal>release</literal> command generates a Release file from a "
+#| "directory tree. It recursively searches the given directory for "
+#| "uncompressed <filename>Packages</filename> and <filename>Sources</"
+#| "filename> files and ones compressed with <command>gzip</command>, "
+#| "<command>bzip2</command> or <command>lzma</command> as well as "
+#| "<filename>Release</filename> and <filename>md5sum.txt</filename> files by "
+#| "default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). "
+#| "Additional filename patterns can be added by listing them in "
+#| "<literal>APT::FTPArchive::Release::Patterns</literal>. It then writes to "
+#| "stdout a <filename>Release</filename> file containing an MD5, SHA1 and "
+#| "SHA256 digest for each file."
+msgid ""
+"The <literal>release</literal> command generates a Release file from a "
+"directory tree. It recursively searches the given directory for uncompressed "
+"and compressed <filename>Packages</filename>, <filename>Sources</filename>, "
+"<filename>Contents</filename>, <filename>Components</filename> and "
+"<filename>icons</filename> files as well as <filename>Release</filename>, "
+"<filename>Index</filename> and <filename>md5sum.txt</filename> files by "
+"default (<literal>APT::FTPArchive::Release::Default-Patterns</literal>). "
+"Additional filename patterns can be added by listing them in <literal>APT::"
+"FTPArchive::Release::Patterns</literal>. It then writes to stdout a "
+"<filename>Release</filename> file containing (by default) an MD5, SHA1, "
+"SHA256 and SHA512 digest for each file."
+msgstr ""
+"La commande <literal>release</literal> crée un fichier Release à partir "
+"d'une arborescence. Elle recherche récursivement dans le répertoire indiqué "
+"des fichiers <filename>Packages</filename> et <filename>Sources</filename> "
+"non compressés et compressés avec <command>gzip</command>, <command>bzip2</"
+"command> ou <command>lzma</command> ainsi que des fichiers "
+"<filename>Release</filename> et <filename>md5sum.txt</filename> par défaut "
+"(<literal>APT::FTPArchive::Release::Default-Patterns</literal>). Des motifs "
+"supplémentaires pour les noms de fichiers peuvent être ajoutés en les "
+"mentionnant dans <literal>APT::FTPArchive::Release::Patterns</literal>. Le "
+"fichier <filename>Release</filename> est ensuite affiché et comporte des "
+"sommes de contrôle MD5, SHA1 et SHA256 pour chaque fichier."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "Values for the additional metadata fields in the Release file are taken "
+#| "from the corresponding variables under <literal>APT::FTPArchive::Release</"
+#| "literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
+#| "supported fields are: <literal>Origin</literal>, <literal>Label</"
+#| "literal>, <literal>Suite</literal>, <literal>Version</literal>, "
+#| "<literal>Codename</literal>, <literal>Date</literal>, <literal>Valid-"
+#| "Until</literal>, <literal>Architectures</literal>, <literal>Components</"
+#| "literal>, <literal>Description</literal>."
+msgid ""
+"Values for the additional metadata fields in the Release file are taken from "
+"the corresponding variables under <literal>APT::FTPArchive::Release</"
+"literal>, e.g. <literal>APT::FTPArchive::Release::Origin</literal>. The "
+"supported fields are <literal>Origin</literal>, <literal>Label</literal>, "
+"<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</"
+"literal>, <literal>Date</literal>, <literal>Valid-Until</literal>, "
+"<literal>Signed-By</literal>, <literal>Architectures</literal>, "
+"<literal>Components</literal> and <literal>Description</literal>."
+msgstr ""
+"La valeur des autres champs de métadonnées du fichier Release sont tirées de "
+"la valeur correspondante dans <literal>APT::FTPArchive::Release</literal>, "
+"p. ex. <literal>APT::FTPArchive::Release::Origin</literal>. Les champs "
+"reconnus sont : <literal>Origin</literal>, <literal>Label</literal>, "
+"<literal>Suite</literal>, <literal>Version</literal>, <literal>Codename</"
+"literal>, <literal>Date</literal>, <literal>Valid-Until</literal>, "
+"<literal>Architectures</literal>, <literal>Components</literal>, "
+"<literal>Description</literal>."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>generate</literal> command is designed to be runnable from a "
+"cron script and builds indexes according to the given config file. The "
+"config language provides a flexible means of specifying which index files "
+"are built from which directories, as well as providing a simple means of "
+"maintaining the required settings."
+msgstr ""
+"La commande <literal>generate</literal> est conçue pour être exécutable par "
+"le programme cron et elle crée un index en suivant le fichier de "
+"configuration donné. Le langage de configuration fournit un moyen souple de "
+"préciser index et répertoires aussi bien que les paramètres requis."
+
+#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>clean</literal> command tidies the databases used by the given "
+"configuration file by removing any records that are no longer necessary."
+msgstr ""
+"La commande <literal>clean</literal> nettoie les bases de données utilisées "
+"par le fichier de configuration en supprimant les enregistrements qui ne "
+"sont plus nécessaires."
+
+#. type: Content of: <refentry><refsect1><title>
+#: apt-ftparchive.1.xml
+msgid "The Generate Configuration"
+msgstr "Configuration de la commande generate"
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>generate</literal> command uses a configuration file to "
+"describe the archives that are going to be generated. It follows the typical "
+"ISC configuration format as seen in ISC tools like bind 8 and dhcpd. &apt-"
+"conf; contains a description of the syntax. Note that the generate "
+"configuration is parsed in sectional manner, but &apt-conf; is parsed in a "
+"tree manner. This only effects how the scope tag is handled."
+msgstr ""
+"La commande <literal>generate</literal> utilise un fichier de configuration "
+"pour décrire l'archive qui va être créée. Le format de ce fichier est le "
+"format ISC classique utilisé par des outils ISC comme bind 8 et dhcpd. Le "
+"fichier &apt-conf; décrit ce format. Il faut noter que l'analyse de ce "
+"fichier se fait par section tandis que celle d'&apt-conf; se fait par "
+"arborescence. Cela n'affecte que l'usage de l'étiquette de visée (scope tag)."
+
+#. type: Content of: <refentry><refsect1><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The generate configuration has four separate sections, each described below."
+msgstr ""
+"Ce fichier de configuration possède quatre sections, décrites ci-dessous."
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt-ftparchive.1.xml
+msgid "<literal>Dir</literal> Section"
+msgstr "La section <literal>Dir</literal>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>Dir</literal> section defines the standard directories needed "
+"to locate the files required during the generation process. These "
+"directories are prepended certain relative paths defined in later sections "
+"to produce a complete an absolute path."
+msgstr ""
+"La section <literal>Dir</literal> définit les répertoires standards où "
+"situer les fichiers nécessaires au processus de création. Ces répertoires "
+"sont précédés de chemins relatifs définis dans les sections suivantes de "
+"manière à produire un chemin absolu et complet."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Specifies the root of the FTP archive, in a standard Debian configuration "
+"this is the directory that contains the <filename>ls-LR</filename> and dist "
+"nodes."
+msgstr ""
+"Indique la racine de l'archive FTP ; Pour une configuration Debian "
+"classique, c'est le répertoire qui contient le fichier <filename>ls-LR</"
+"filename> et les noeuds des distributions."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid "Specifies the location of the override files."
+msgstr "Indique l'emplacement des fichiers d'« override »."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid "Specifies the location of the cache files."
+msgstr "Indique l'emplacement des fichiers de cache."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Specifies the location of the file list files, if the <literal>FileList</"
+"literal> setting is used below."
+msgstr ""
+"Indique l'emplacement des fichiers contenant la liste des fichiers (si on se "
+"sert de la valeur <literal>FileList</literal> définie plus bas)."
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt-ftparchive.1.xml
+msgid "<literal>Default</literal> Section"
+msgstr "La section <literal>Default</literal>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>Default</literal> section specifies default values, and "
+"settings that control the operation of the generator. Other sections may "
+"override these defaults with a per-section setting."
+msgstr ""
+"La section <literal>Default</literal> précise les valeurs par défaut et les "
+"paramètres qui contrôlent la marche du générateur. Ces valeurs peuvent être "
+"annulées dans d'autres sections (paramètrage par section)."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+#, fuzzy
+#| msgid ""
+#| "Sets the default compression schemes to use for the package index files. "
+#| "It is a string that contains a space separated list of at least one of: "
+#| "'.' (no compression), 'gzip' and 'bzip2'. The default for all compression "
+#| "schemes is '. gzip'."
+msgid ""
+"Sets the default compression schemes to use for the package index files. It "
+"is a string that contains a space separated list of at least one of the "
+"compressors configured via the <option>APT::Compressor</option> "
+"configuration scope. The default for all compression schemes is '. gzip'."
+msgstr ""
+"Indique comment sont compressés les fichiers d'index. C'est une chaîne qui "
+"contient des valeurs séparées par des espaces ; elle contient au moins l'une "
+"des valeurs suivantes : « . » (pas de compression), « gzip », « bzip2 ». "
+"Par défaut, c'est la chaîne « . gzip »."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the default list of file extensions that are package files. This "
+"defaults to '.deb'."
+msgstr ""
+"Indique la liste par défaut des extensions de fichier qui constituent des "
+"paquets. Par défaut, c'est « .deb »."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"This is similar to <literal>Packages::Compress</literal> except that it "
+"controls the compression for the Sources files."
+msgstr ""
+"Identique à <literal>Packages::Compress</literal> mais précise comment sont "
+"compressés les fichiers sources."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the default list of file extensions that are source files. This "
+"defaults to '.dsc'."
+msgstr ""
+"Indique la liste par défaut des extensions de fichier qui constituent des "
+"fichiers sources. Par défaut, c'est « .dsc »."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"This is similar to <literal>Packages::Compress</literal> except that it "
+"controls the compression for the Contents files."
+msgstr ""
+"Identique à <literal>Packages::Compress</literal> mais précise comment sont "
+"compressés les fichiers « Contents »."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"This is similar to <literal>Packages::Compress</literal> except that it "
+"controls the compression for the Translation-en master file."
+msgstr ""
+"Identique à <literal>Packages::Compress</literal> mais précise comment est "
+"compressé le fichier maître Translations-en."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Specifies the number of kilobytes to delink (and replace with hard links) "
+"per run. This is used in conjunction with the per-section <literal>External-"
+"Links</literal> setting."
+msgstr ""
+"Indique le nombre de kilo-octets à délier (et à remplacer par des liens en "
+"dur) pour chaque exécution. On s'en sert, pour chaque section, avec le "
+"paramètre <literal>External-Links</literal>."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Specifies the mode of all created index files. It defaults to 0644. All "
+"index files are set to this mode with no regard to the umask."
+msgstr ""
+"Indique le système de permissions des fichiers d'index créés. Par défaut, "
+"c'est le mode 0644. Tous les fichiers d'index ont ce mode et le masque "
+"utilisateur (umasq) est ignoré."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Specifies whether long descriptions should be included in the "
+"<filename>Packages</filename> file or split out into a master "
+"<filename>Translation-en</filename> file."
+msgstr ""
+"Définit si les descriptions longues doivent être incluses dans le fichier "
+"<filename>Packages</filename> ou déplacées dans un fichier maître "
+"<filename>Translation-en</filename>."
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt-ftparchive.1.xml
+msgid "<literal>TreeDefault</literal> Section"
+msgstr "La section <literal>TreeDefault</literal>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets defaults specific to <literal>Tree</literal> sections. All of these "
+"variables are substitution variables and have the strings $(DIST), "
+"$(SECTION) and $(ARCH) replaced with their respective values."
+msgstr ""
+"Indique les valeurs par défaut particulières à la section <literal>Tree</"
+"literal>. Toutes ces variables sont des variables de substitution ; les "
+"chaînes $(DIST), $(SECTION) et $(ARCH) sont remplacées par leur valeur "
+"respective."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the number of kilobytes of contents files that are generated each day. "
+"The contents files are round-robined so that over several days they will all "
+"be rebuilt."
+msgstr ""
+"Indique le nombre de kilo-octets de fichiers « Contents » qui sont créés "
+"chaque jour. Les fichiers « Contents » sont choisis selon le système « round-"
+"robin » de manière que, sur plusieurs jours, tous soient reconstruits."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Controls the number of days a contents file is allowed to be checked without "
+"changing. If this limit is passed the mtime of the contents file is updated. "
+"This case can occur if the package file is changed in such a way that does "
+"not result in a new contents file [override edit for instance]. A hold off "
+"is allowed in hopes that new .debs will be installed, requiring a new file "
+"anyhow. The default is 10, the units are in days."
+msgstr ""
+"Contrôle le nombre de jours pendant lequel un fichier « Contents » peut être "
+"utilisé sans actualisation. Quand cette limite est franchie, le « mtime » du "
+"fichier « Contents » est mis à jour. Cela peut arriver quand un fichier est "
+"modifié sans que cela modifie le fichier « Contents » (modification par "
+"« override » par exemple). Un délai est permis dans l'espoir que de "
+"nouveaux « .deb » seront installés, exigeant un nouveau « Contents ». Par "
+"défaut ce nombre vaut 10, l'unité étant le jour."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the top of the .deb directory tree. Defaults to <filename>$(DIST)/"
+"$(SECTION)/binary-$(ARCH)/</filename>"
+msgstr ""
+"Indique la racine de l'arborescence des « .deb ». Par défaut, c'est "
+"<filename>$(DIST)/$(SECTION)/binary-$(ARCH)/</filename>."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the top of the source package directory tree. Defaults to <filename>"
+"$(DIST)/$(SECTION)/source/</filename>"
+msgstr ""
+"Indique la racine de l'arborescence des paquets source. Par défaut, c'est "
+"<filename>$(DIST)/$(SECTION)/source/</filename>."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the output Packages file. Defaults to <filename>$(DIST)/$(SECTION)/"
+"binary-$(ARCH)/Packages</filename>"
+msgstr ""
+"Indique le fichier « Packages » créé. Par défaut, c'est <filename>$(DIST)/"
+"$(SECTION)/binary-$(ARCH)/Packages</filename>."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the output Sources file. Defaults to <filename>$(DIST)/$(SECTION)/"
+"source/Sources</filename>"
+msgstr ""
+"Indique le fichier « Sources » créé. Par défaut, c'est <filename>$(DIST)/"
+"$(SECTION)/source/Sources</filename>."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the output Translation-en master file with the long descriptions if "
+"they should be not included in the Packages file. Defaults to <filename>"
+"$(DIST)/$(SECTION)/i18n/Translation-en</filename>"
+msgstr ""
+"Définit le fichier maître Translation-en qui comporte les descriptions "
+"longues si elles ne sont pas incluses dans le fichier Packages. Valeur par "
+"défaut : <filename>$(DIST)/$(SECTION)/i18n/Translation-en</filename>"
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the path prefix that causes a symlink to be considered an internal link "
+"instead of an external link. Defaults to <filename>$(DIST)/$(SECTION)/</"
+"filename>"
+msgstr ""
+"Indique un préfixe de chemin ; ce préfixe fait qu'un lien symbolique sera "
+"considéré comme un lien interne plutôt que comme un lien externe. Par "
+"défaut, c'est <filename>$(DIST)/$(SECTION)/</filename>."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the output Contents file. Defaults to <filename>$(DIST)/$(SECTION)/"
+"Contents-$(ARCH)</filename>. If this setting causes multiple Packages files "
+"to map onto a single Contents file (as is the default) then <command>apt-"
+"ftparchive</command> will integrate those package files together "
+"automatically."
+msgstr ""
+"Indique le fichier « Contents » créé. Par défaut, c'est <filename>$(DIST)/"
+"Contents-$(ARCH)</filename>. Quand le paramètrage fait que différents "
+"fichiers « Packages » se réfèrent à un seul fichier « Contents », "
+"<command>apt-ftparchive</command> les intègre automatiquement."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid "Sets header file to prepend to the contents output."
+msgstr "Indique l'en-tête à préfixer au fichier « Contents » créé."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the binary cache database to use for this section. Multiple sections "
+"can share the same database."
+msgstr ""
+"Indique la base de données binaire servant de cache pour cette section. "
+"Différentes sections peuvent partager cette base de données."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Specifies that instead of walking the directory tree, <command>apt-"
+"ftparchive</command> should read the list of files from the given file. "
+"Relative files names are prefixed with the archive directory."
+msgstr ""
+"Indique qu'au lieu de lire l'arborescence, <command>apt-ftparchive</command> "
+"doit lire la liste de fichiers dans le fichier donné en paramètre. Les noms "
+"relatifs sont préfixés par le répertoire de l'archive."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Specifies that instead of walking the directory tree, <command>apt-"
+"ftparchive</command> should read the list of files from the given file. "
+"Relative files names are prefixed with the archive directory. This is used "
+"when processing source indexes."
+msgstr ""
+"Indique qu'au lieu de lire l'arborescence, <command>apt-ftparchive</command> "
+"doit lire la liste de fichiers dans le fichier donné en paramètre. Les noms "
+"relatifs sont préfixés par le répertoire de l'archive. On s'en sert pour "
+"traiter les index de sources."
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt-ftparchive.1.xml
+msgid "<literal>Tree</literal> Section"
+msgstr "La section <literal>Tree</literal>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>Tree</literal> section defines a standard Debian file tree "
+"which consists of a base directory, then multiple sections in that base "
+"directory and finally multiple Architectures in each section. The exact "
+"pathing used is defined by the <literal>Directory</literal> substitution "
+"variable."
+msgstr ""
+"La section <literal>Tree</literal> définit une arborescence debian classique "
+"avec un répertoire de base, différentes sections dans ce répertoire et "
+"différentes architectures dans chaque section. Le chemin exact est défini "
+"par la variable de substitution <literal>Directory</literal>."
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"The <literal>Tree</literal> section takes a scope tag which sets the "
+"<literal>$(DIST)</literal> variable and defines the root of the tree (the "
+"path is prefixed by <literal>ArchiveDir</literal>). Typically this is a "
+"setting such as <filename>dists/&debian-stable-codename;</filename>."
+msgstr ""
+"La section <literal>Tree</literal> accepte une étiquette de visée (scope "
+"tag) qui détermine la variable <literal>$(DIST)</literal> et la racine de "
+"l'arborescence (le chemin est préfixé par <literal>ArchiveDir</literal>). "
+"C'est par exemple : <filename>dists/&debian-stable-codename;</filename>."
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"All of the settings defined in the <literal>TreeDefault</literal> section "
+"can be used in a <literal>Tree</literal> section as well as three new "
+"variables."
+msgstr ""
+"Tous les paramètres définis dans la section <literal>TreeDefault</literal> "
+"peuvent s'utiliser dans la section <literal>Tree</literal> ainsi que les "
+"trois nouvelles variables suivantes."
+
+#. type: Content of: <refentry><refsect1><refsect2><para><programlisting>
+#: apt-ftparchive.1.xml
+#, no-wrap
+msgid ""
+"for i in Sections do \n"
+" for j in Architectures do\n"
+" Generate for DIST=scope SECTION=i ARCH=j\n"
+" "
+msgstr ""
+"for i in Sections do \n"
+" for j in Architectures do\n"
+" Generate for DIST=scope SECTION=i ARCH=j\n"
+" "
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"When processing a <literal>Tree</literal> section <command>apt-ftparchive</"
+"command> performs an operation similar to: <placeholder type=\"programlisting"
+"\" id=\"0\"/>"
+msgstr ""
+"Quand il exécute la section <literal>Tree</literal>, <command>apt-"
+"ftparchive</command> effectue une opération analogue à : <placeholder type="
+"\"programlisting\" id=\"0\"/>"
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"This is a space separated list of sections which appear under the "
+"distribution; typically this is something like <literal>main contrib non-"
+"free</literal>"
+msgstr ""
+"C'est une liste de sections séparées par des espaces qui appartiennent à une "
+"distribution ; classiquement, on trouve <literal>main contrib non-free</"
+"literal>."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"This is a space separated list of all the architectures that appear under "
+"search section. The special architecture 'source' is used to indicate that "
+"this tree has a source archive. The architecture 'all' signals that "
+"architecture specific files like <filename>Packages</filename> should not "
+"include information about architecture <literal>all</literal> packages in "
+"all files as they will be available in a dedicated file."
+msgstr ""
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the binary override file. The override file contains section, priority "
+"and maintainer address information."
+msgstr ""
+"Indique le fichier binaire d'« override ». Ce fichier contient des "
+"informations sur la section, la priorité et le responsable du paquet."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid ""
+"Sets the source override file. The override file contains section "
+"information."
+msgstr ""
+"Indique le fichier source d'« override ». Ce fichier contient des "
+"informations sur la section."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid "Sets the binary extra override file."
+msgstr "Indique un autre fichier d'« override » pour les binaires."
+
+#. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
+#: apt-ftparchive.1.xml
+msgid "Sets the source extra override file."
+msgstr "Indique un autre fichier d'« override » pour les sources."
+
+#. type: Content of: <refentry><refsect1><refsect2><title>
+#: apt-ftparchive.1.xml
+msgid "<literal>BinDirectory</literal> Section"
+msgstr "La section <literal>BinDirectory</literal>"
+
+#. type: Content of: <refentry><refsect1><refsect2><para>
+#: apt-ftparchive.1.xml
projects / apt.git / blobdiff