-"The chain of trust in Debian starts when a maintainer uploads a new package "
-"or a new version of a package to the Debian archive. This upload in order to "
-"become effective needs to be signed by a key of a maintainer within the "
-"Debian maintainer's keyring (available in the debian-keyring package). "
-"Maintainer's keys are signed by other maintainers following pre-established "
-"procedures to ensure the identity of the key holder."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:92
-msgid ""
-"Once the uploaded package is verified and included in the archive, the "
-"maintainer signature is stripped off, an MD5 sum of the package is computed "
-"and put in the Packages file. The MD5 sum of all of the packages files are "
-"then computed and put into the Release file. The Release file is then signed "
-"by the archive key (which is created once a year) and distributed through "
-"the FTP server. This key is also on the Debian keyring."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:102
-msgid ""
-"Any end user can check the signature of the Release file, extract the MD5 "
-"sum of a package from it and compare it with the MD5 sum of the package he "
-"downloaded. Prior to version 0.6 only the MD5 sum of the downloaded Debian "
-"package was checked. Now both the MD5 sum and the signature of the Release "
-"file are checked."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:109
-msgid ""
-"Notice that this is distinct from checking signatures on a per package "
-"basis. It is designed to prevent two possible attacks:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:114
-msgid ""
-"<literal>Network \"man in the middle\" attacks</literal>. Without signature "
-"checking, a malicious agent can introduce himself in the package download "
-"process and provide malicious software either by controlling a network "
-"element (router, switch, etc.) or by redirecting traffic to a rogue server "
-"(through arp or DNS spoofing attacks)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:122
-msgid ""
-"<literal>Mirror network compromise</literal>. Without signature checking, a "
-"malicious agent can compromise a mirror host and modify the files in it to "
-"propagate malicious software to all users downloading packages from that "
-"host."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:129
-msgid ""
-"However, it does not defend against a compromise of the Debian master server "
-"itself (which signs the packages) or against a compromise of the key used to "
-"sign the Release files. In any case, this mechanism can complement a per-"
-"package signature."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:135
-msgid "User configuration"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:137
-msgid ""
-"<command>apt-key</command> is the program that manages the list of keys used "
-"by apt. It can be used to add or remove keys although an installation of "
-"this release will automatically provide the default Debian archive signing "
-"keys used in the Debian package repositories."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:144
-msgid ""
-"In order to add a new key you need to first download it (you should make "
-"sure you are using a trusted communication channel when retrieving it), add "
-"it with <command>apt-key</command> and then run <command>apt-get update</"
-"command> so that apt can download and verify the <filename>Release.gpg</"
-"filename> files from the archives you have configured."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:153
-msgid "Archive configuration"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:155
-msgid ""
-"If you want to provide archive signatures in an archive under your "
-"maintenance you have to:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:160
-msgid ""
-"<emphasis>Create a toplevel Release file</emphasis>, if it does not exist "
-"already. You can do this by running <command>apt-ftparchive release</"
-"command> (provided in apt-utils)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:165
-msgid ""
-"<emphasis>Sign it</emphasis>. You can do this by running <command>gpg -abs -"
-"o Release.gpg Release</command>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><itemizedlist><listitem><para>
-#: apt-secure.8.xml:168
-msgid ""
-"<emphasis>Publish the key fingerprint</emphasis>, that way your users will "
-"know what key they need to import in order to authenticate the files in the "
-"archive."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:175
-msgid ""
-"Whenever the contents of the archive changes (new packages are added or "
-"removed) the archive maintainer has to follow the first two steps previously "
-"outlined."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:183
-msgid ""
-"&apt-conf;, &apt-get;, &sources-list;, &apt-key;, &apt-ftparchive;, "
-"&debsign; &debsig-verify;, &gpg;"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:187
-msgid ""
-"For more background information you might want to review the <ulink url="
-"\"http://www.debian.org/doc/manuals/securing-debian-howto/ch7.en.html"
-"\">Debian Security Infrastructure</ulink> chapter of the Securing Debian "
-"Manual (available also in the harden-doc package) and the <ulink url="
-"\"http://www.cryptnet.net/fdp/crypto/strong_distro.html\" >Strong "
-"Distribution HOWTO</ulink> by V. Alex Brennen."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt-secure.8.xml:200
-msgid "Manpage Authors"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-secure.8.xml:202
-msgid ""
-"This man-page is based on the work of Javier Fernández-Sanguino Peña, Isaac "
-"Jones, Colin Walters, Florian Weimer and Michael Vogt."
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refname>
-#: apt-sortpkgs.1.xml:22 apt-sortpkgs.1.xml:29
-msgid "apt-sortpkgs"
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt-sortpkgs.1.xml:30
-msgid "Utility to sort package index files"
-msgstr ""
-
-#. type: Content of: <refentry><refsynopsisdiv><cmdsynopsis>
-#: apt-sortpkgs.1.xml:36
-msgid ""
-"<command>apt-sortpkgs</command> <arg><option>-hvs</option></arg> "
-"<arg><option>-o=<replaceable>config string</replaceable></option></arg> "
-"<arg><option>-c=<replaceable>file</replaceable></option></arg> <arg choice="
-"\"plain\" rep=\"repeat\"><replaceable>file</replaceable></arg>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-sortpkgs.1.xml:45
-msgid ""
-"<command>apt-sortpkgs</command> will take an index file (Source index or "
-"Package index) and sort the records so that they are ordered by the package "
-"name. It will also sort the internal fields of each record according to the "
-"internal sorting rules."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-sortpkgs.1.xml:51
-msgid "All output is sent to stdout, the input must be a seekable file."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt-sortpkgs.1.xml:58
-msgid "<option>--source</option>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt-sortpkgs.1.xml:60
-msgid ""
-"Use Source index field ordering. Configuration Item: <literal>APT::"
-"SortPkgs::Source</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt-sortpkgs.1.xml:74
-msgid ""
-"<command>apt-sortpkgs</command> returns zero on normal operation, decimal "
-"100 on error."
-msgstr ""
-
-#. The last update date
-#. type: Content of: <refentry><refentryinfo>
-#: apt.conf.5.xml:13
-msgid ""
-"&apt-author.jgunthorpe; &apt-author.team; <author> <firstname>Daniel</"
-"firstname> <surname>Burrows</surname> <contrib>Initial documentation of "
-"Debug::*.</contrib> <email>dburrows@debian.org</email> </author> &apt-email; "
-"&apt-product; <date>16 January 2010</date>"
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refname>
-#: apt.conf.5.xml:28 apt.conf.5.xml:35
-msgid "apt.conf"
-msgstr ""
-
-#. type: Content of: <refentry><refmeta><manvolnum>
-#: apt.conf.5.xml:29 apt_preferences.5.xml:22 sources.list.5.xml:23
-msgid "5"
-msgstr ""
-
-#. type: Content of: <refentry><refnamediv><refpurpose>
-#: apt.conf.5.xml:36
-msgid "Configuration file for APT"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:40
-msgid ""
-"<filename>apt.conf</filename> is the main configuration file for the APT "
-"suite of tools, but by far not the only place changes to options can be "
-"made. All tools therefore share the configuration files and also use a "
-"common command line parser to provide a uniform environment."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><orderedlist><para>
-#: apt.conf.5.xml:45
-msgid ""
-"When an APT tool starts up it will read the configuration files in the "
-"following order:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:47
-msgid ""
-"the file specified by the <envar>APT_CONFIG</envar> environment variable (if "
-"any)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:49
-msgid ""
-"all files in <literal>Dir::Etc::Parts</literal> in alphanumeric ascending "
-"order which have no or \"<literal>conf</literal>\" as filename extension and "
-"which only contain alphanumeric, hyphen (-), underscore (_) and period (.) "
-"characters - otherwise they will be silently ignored."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:54
-msgid ""
-"the main configuration file specified by <literal>Dir::Etc::main</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><orderedlist><listitem><para>
-#: apt.conf.5.xml:56
-msgid ""
-"the command line options are applied to override the configuration "
-"directives or to load even more configuration files."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:60
-msgid "Syntax"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:61
-msgid ""
-"The configuration file is organized in a tree with options organized into "
-"functional groups. Option specification is given with a double colon "
-"notation, for instance <literal>APT::Get::Assume-Yes</literal> is an option "
-"within the APT tool group, for the Get tool. Options do not inherit from "
-"their parent groups."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:67
-msgid ""
-"Syntactically the configuration language is modeled after what the ISC tools "
-"such as bind and dhcp use. Lines starting with <literal>//</literal> are "
-"treated as comments (ignored), as well as all text between <literal>/*</"
-"literal> and <literal>*/</literal>, just like C/C++ comments. Each line is "
-"of the form <literal>APT::Get::Assume-Yes \"true\";</literal>. The trailing "
-"semicolon and the quotes are required. The value must be on one line, and "
-"there is no kind of string concatenation. It must not include inside "
-"quotes. The behavior of the backslash \"\\\" and escaped characters inside "
-"a value is undefined and it should not be used. An option name may include "
-"alphanumerical characters and the \"/-:._+\" characters. A new scope can be "
-"opened with curly braces, like:"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><informalexample><programlisting>
-#: apt.conf.5.xml:81
-#, no-wrap
-msgid ""
-"APT {\n"
-" Get {\n"
-" Assume-Yes \"true\";\n"
-" Fix-Broken \"true\";\n"
-" };\n"
-"};\n"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:89
-msgid ""
-"with newlines placed to make it more readable. Lists can be created by "
-"opening a scope and including a single string enclosed in quotes followed by "
-"a semicolon. Multiple entries can be included, each separated by a semicolon."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><informalexample><programlisting>
-#: apt.conf.5.xml:94
-#, no-wrap
-msgid "DPkg::Pre-Install-Pkgs {\"/usr/sbin/dpkg-preconfigure --apt\";};\n"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:97
-msgid ""
-"In general the sample configuration file in <filename>&docdir;examples/apt."
-"conf</filename> &configureindex; is a good guide for how it should look."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:101
-msgid ""
-"The names of the configuration items are not case-sensitive. So in the "
-"previous example you could use <literal>dpkg::pre-install-pkgs</literal>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:104
-msgid ""
-"Names for the configuration items are optional if a list is defined as it "
-"can be see in the <literal>DPkg::Pre-Install-Pkgs</literal> example above. "
-"If you don't specify a name a new entry will simply add a new option to the "
-"list. If you specify a name you can override the option as every other "
-"option by reassigning a new value to the option."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:109
-msgid ""
-"Two specials are allowed, <literal>#include</literal> (which is deprecated "
-"and not supported by alternative implementations) and <literal>#clear</"
-"literal>: <literal>#include</literal> will include the given file, unless "
-"the filename ends in a slash, then the whole directory is included. "
-"<literal>#clear</literal> is used to erase a part of the configuration tree. "
-"The specified element and all its descendants are erased. (Note that these "
-"lines also need to end with a semicolon.)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:117
-msgid ""
-"The #clear command is the only way to delete a list or a complete scope. "
-"Reopening a scope or the ::-style described below will <emphasis>not</"
-"emphasis> override previously written entries. Only options can be "
-"overridden by addressing a new value to it - lists and scopes can't be "
-"overridden, only cleared."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:122
-msgid ""
-"All of the APT tools take a -o option which allows an arbitrary "
-"configuration directive to be specified on the command line. The syntax is a "
-"full option name (<literal>APT::Get::Assume-Yes</literal> for instance) "
-"followed by an equals sign then the new value of the option. Lists can be "
-"appended too by adding a trailing :: to the list name. (As you might "
-"suspect: The scope syntax can't be used on the command line.)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:129
-msgid ""
-"Note that you can use :: only for appending one item per line to a list and "
-"that you should not use it in combination with the scope syntax. (The scope "
-"syntax implicit insert ::) Using both syntaxes together will trigger a bug "
-"which some users unfortunately relay on: An option with the unusual name "
-"\"<literal>::</literal>\" which acts like every other option with a name. "
-"These introduces many problems including that a user who writes multiple "
-"lines in this <emphasis>wrong</emphasis> syntax in the hope to append to a "
-"list will gain the opposite as only the last assignment for this option "
-"\"<literal>::</literal>\" will be used. Upcoming APT versions will raise "
-"errors and will stop working if they encounter this misuse, so please "
-"correct such statements now as long as APT doesn't complain explicit about "
-"them."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:141
-msgid "The APT Group"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:142
-msgid ""
-"This group of options controls general APT behavior as well as holding the "
-"options for all of the tools."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:146
-msgid "Architecture"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:147
-msgid ""
-"System Architecture; sets the architecture to use when fetching files and "
-"parsing package lists. The internal default is the architecture apt was "
-"compiled for."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:152
-msgid "Default-Release"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:153
-msgid ""
-"Default release to install packages from if more than one version available. "
-"Contains release name, codename or release version. Examples: 'stable', "
-"'testing', 'unstable', 'lenny', 'squeeze', '4.0', '5.0*'. See also &apt-"
-"preferences;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:157
-msgid "Ignore-Hold"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:158
-msgid ""
-"Ignore Held packages; This global option causes the problem resolver to "
-"ignore held packages in its decision making."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:162
-msgid "Clean-Installed"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:163
-msgid ""
-"Defaults to on. When turned on the autoclean feature will remove any "
-"packages which can no longer be downloaded from the cache. If turned off "
-"then packages that are locally installed are also excluded from cleaning - "
-"but note that APT provides no direct means to reinstall them."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:169
-msgid "Immediate-Configure"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:170
-msgid ""
-"Defaults to on which will cause APT to install essential and important "
-"packages as fast as possible in the install/upgrade operation. This is done "
-"to limit the effect of a failing &dpkg; call: If this option is disabled APT "
-"does treat an important package in the same way as an extra package: Between "
-"the unpacking of the important package A and his configuration can then be "
-"many other unpack or configuration calls, e.g. for package B which has no "
-"relation to A, but causes the dpkg call to fail (e.g. because maintainer "
-"script of package B generates an error) which results in a system state in "
-"which package A is unpacked but unconfigured - each package depending on A "
-"is now no longer guaranteed to work as their dependency on A is not longer "
-"satisfied. The immediate configuration marker is also applied to all "
-"dependencies which can generate a problem if the dependencies e.g. form a "
-"circle as a dependency with the immediate flag is comparable with a Pre-"
-"Dependency. So in theory it is possible that APT encounters a situation in "
-"which it is unable to perform immediate configuration, errors out and refers "
-"to this option so the user can deactivate the immediate configuration "
-"temporarily to be able to perform an install/upgrade again. Note the use of "
-"the word \"theory\" here as this problem was only encountered by now in real "
-"world a few times in non-stable distribution versions and was caused by "
-"wrong dependencies of the package in question or by a system in an already "
-"broken state, so you should not blindly disable this option as the mentioned "
-"scenario above is not the only problem immediate configuration can help to "
-"prevent in the first place. Before a big operation like <literal>dist-"
-"upgrade</literal> is run with this option disabled it should be tried to "
-"explicitly <literal>install</literal> the package APT is unable to configure "
-"immediately, but please make sure to report your problem also to your "
-"distribution and to the APT team with the buglink below so they can work on "
-"improving or correcting the upgrade process."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:192
-msgid "Force-LoopBreak"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:193
-msgid ""
-"Never Enable this option unless you -really- know what you are doing. It "
-"permits APT to temporarily remove an essential package to break a Conflicts/"
-"Conflicts or Conflicts/Pre-Depend loop between two essential packages. SUCH "
-"A LOOP SHOULD NEVER EXIST AND IS A GRAVE BUG. This option will work if the "
-"essential packages are not tar, gzip, libc, dpkg, bash or anything that "
-"those packages depend on."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:201
-msgid "Cache-Limit"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:202
-msgid ""
-"APT uses a fixed size memory mapped cache file to store the 'available' "
-"information. This sets the size of that cache (in bytes)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:206
-msgid "Build-Essential"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:207
-msgid "Defines which package(s) are considered essential build dependencies."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:210
-msgid "Get"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:211
-msgid ""
-"The Get subsection controls the &apt-get; tool, please see its documentation "
-"for more information about the options here."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:215
-msgid "Cache"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:216
-msgid ""
-"The Cache subsection controls the &apt-cache; tool, please see its "
-"documentation for more information about the options here."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:220
-msgid "CDROM"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:221
-msgid ""
-"The CDROM subsection controls the &apt-cdrom; tool, please see its "
-"documentation for more information about the options here."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:227
-msgid "The Acquire Group"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:232
-msgid "PDiffs"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:233
-msgid ""
-"Try to download deltas called <literal>PDiffs</literal> for Packages or "
-"Sources files instead of downloading whole ones. True by default."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:236
-msgid ""
-"Two sub-options to limit the use of PDiffs are also available: With "
-"<literal>FileLimit</literal> can be specified how many PDiff files are "
-"downloaded at most to patch a file. <literal>SizeLimit</literal> on the "
-"other hand is the maximum precentage of the size of all patches compared to "
-"the size of the targeted file. If one of these limits is exceeded the "
-"complete file is downloaded instead of the patches."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:245
-msgid "Queue-Mode"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:246
-msgid ""
-"Queuing mode; <literal>Queue-Mode</literal> can be one of <literal>host</"
-"literal> or <literal>access</literal> which determines how APT parallelizes "
-"outgoing connections. <literal>host</literal> means that one connection per "
-"target host will be opened, <literal>access</literal> means that one "
-"connection per URI type will be opened."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:253
-msgid "Retries"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:254
-msgid ""
-"Number of retries to perform. If this is non-zero APT will retry failed "
-"files the given number of times."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:258
-msgid "Source-Symlinks"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:259
-msgid ""
-"Use symlinks for source archives. If set to true then source archives will "
-"be symlinked when possible instead of copying. True is the default."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:263 sources.list.5.xml:139
-msgid "http"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:264
-msgid ""
-"HTTP URIs; http::Proxy is the default http proxy to use. It is in the "
-"standard form of <literal>http://[[user][:pass]@]host[:port]/</literal>. Per "
-"host proxies can also be specified by using the form <literal>http::Proxy::"
-"<host></literal> with the special keyword <literal>DIRECT</literal> "
-"meaning to use no proxies. If no one of the above settings is specified, "
-"<envar>http_proxy</envar> environment variable will be used."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:272
-msgid ""
-"Three settings are provided for cache control with HTTP/1.1 compliant proxy "
-"caches. <literal>No-Cache</literal> tells the proxy to not use its cached "
-"response under any circumstances, <literal>Max-Age</literal> is sent only "
-"for index files and tells the cache to refresh its object if it is older "
-"than the given number of seconds. Debian updates its index files daily so "
-"the default is 1 day. <literal>No-Store</literal> specifies that the cache "
-"should never store this request, it is only set for archive files. This may "
-"be useful to prevent polluting a proxy cache with very large .deb files. "
-"Note: Squid 2.0.2 does not support any of these options."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:282 apt.conf.5.xml:346
-msgid ""
-"The option <literal>timeout</literal> sets the timeout timer used by the "
-"method, this applies to all things including connection timeout and data "
-"timeout."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:285
-msgid ""
-"One setting is provided to control the pipeline depth in cases where the "
-"remote server is not RFC conforming or buggy (such as Squid 2.0.2). "
-"<literal>Acquire::http::Pipeline-Depth</literal> can be a value from 0 to 5 "
-"indicating how many outstanding requests APT should send. A value of zero "
-"MUST be specified if the remote host does not properly linger on TCP "
-"connections - otherwise data corruption will occur. Hosts which require this "
-"are in violation of RFC 2068."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:293
-msgid ""
-"The used bandwidth can be limited with <literal>Acquire::http::Dl-Limit</"
-"literal> which accepts integer values in kilobyte. The default value is 0 "
-"which deactivates the limit and tries uses as much as possible of the "
-"bandwidth (Note that this option implicit deactivates the download from "
-"multiple servers at the same time.)"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:298
-msgid ""
-"<literal>Acquire::http::User-Agent</literal> can be used to set a different "
-"User-Agent for the http download method as some proxies allow access for "
-"clients only if the client uses a known identifier."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:304
-msgid "https"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:305
-msgid ""
-"HTTPS URIs. Cache-control, Timeout, AllowRedirect, Dl-Limit and proxy "
-"options are the same as for <literal>http</literal> method and will also "
-"default to the options from the <literal>http</literal> method if they are "
-"not explicitly set for https. <literal>Pipeline-Depth</literal> option is "
-"not supported yet."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:311
-msgid ""
-"<literal>CaInfo</literal> suboption specifies place of file that holds info "
-"about trusted certificates. <literal><host>::CaInfo</literal> is "
-"corresponding per-host option. <literal>Verify-Peer</literal> boolean "
-"suboption determines whether verify server's host certificate against "
-"trusted certificates or not. <literal><host>::Verify-Peer</literal> "
-"is corresponding per-host option. <literal>Verify-Host</literal> boolean "
-"suboption determines whether verify server's hostname or not. <literal><"
-"host>::Verify-Host</literal> is corresponding per-host option. "
-"<literal>SslCert</literal> determines what certificate to use for client "
-"authentication. <literal><host>::SslCert</literal> is corresponding "
-"per-host option. <literal>SslKey</literal> determines what private key to "
-"use for client authentication. <literal><host>::SslKey</literal> is "
-"corresponding per-host option. <literal>SslForceVersion</literal> overrides "
-"default SSL version to use. Can contain 'TLSv1' or 'SSLv3' string. "
-"<literal><host>::SslForceVersion</literal> is corresponding per-host "
-"option."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:329 sources.list.5.xml:150
-msgid "ftp"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:330
-msgid ""
-"FTP URIs; ftp::Proxy is the default ftp proxy to use. It is in the standard "
-"form of <literal>ftp://[[user][:pass]@]host[:port]/</literal>. Per host "
-"proxies can also be specified by using the form <literal>ftp::Proxy::<"
-"host></literal> with the special keyword <literal>DIRECT</literal> "
-"meaning to use no proxies. If no one of the above settings is specified, "
-"<envar>ftp_proxy</envar> environment variable will be used. To use a ftp "
-"proxy you will have to set the <literal>ftp::ProxyLogin</literal> script in "
-"the configuration file. This entry specifies the commands to send to tell "
-"the proxy server what to connect to. Please see &configureindex; for an "
-"example of how to do this. The substitution variables available are <literal>"
-"$(PROXY_USER)</literal> <literal>$(PROXY_PASS)</literal> <literal>"
-"$(SITE_USER)</literal> <literal>$(SITE_PASS)</literal> <literal>$(SITE)</"
-"literal> and <literal>$(SITE_PORT)</literal> Each is taken from it's "
-"respective URI component."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:349
-msgid ""
-"Several settings are provided to control passive mode. Generally it is safe "
-"to leave passive mode on, it works in nearly every environment. However "
-"some situations require that passive mode be disabled and port mode ftp used "
-"instead. This can be done globally, for connections that go through a proxy "
-"or for a specific host (See the sample config file for examples)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:356
-msgid ""
-"It is possible to proxy FTP over HTTP by setting the <envar>ftp_proxy</"
-"envar> environment variable to a http url - see the discussion of the http "
-"method above for syntax. You cannot set this in the configuration file and "
-"it is not recommended to use FTP over HTTP due to its low efficiency."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:361
-msgid ""
-"The setting <literal>ForceExtended</literal> controls the use of RFC2428 "
-"<literal>EPSV</literal> and <literal>EPRT</literal> commands. The default is "
-"false, which means these commands are only used if the control connection is "
-"IPv6. Setting this to true forces their use even on IPv4 connections. Note "
-"that most FTP servers do not support RFC2428."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:368 sources.list.5.xml:132
-msgid "cdrom"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:374
-#, no-wrap
-msgid "/cdrom/::Mount \"foo\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:369
-msgid ""
-"CDROM URIs; the only setting for CDROM URIs is the mount point, "
-"<literal>cdrom::Mount</literal> which must be the mount point for the CDROM "
-"drive as specified in <filename>/etc/fstab</filename>. It is possible to "
-"provide alternate mount and unmount commands if your mount point cannot be "
-"listed in the fstab (such as an SMB mount and old mount packages). The "
-"syntax is to put <placeholder type=\"literallayout\" id=\"0\"/> within the "
-"cdrom block. It is important to have the trailing slash. Unmount commands "
-"can be specified using UMount."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:379
-msgid "gpgv"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:380
-msgid ""
-"GPGV URIs; the only option for GPGV URIs is the option to pass additional "
-"parameters to gpgv. <literal>gpgv::Options</literal> Additional options "
-"passed to gpgv."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:385
-msgid "CompressionTypes"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:391
-#, no-wrap
-msgid "Acquire::CompressionTypes::<replaceable>FileExtension</replaceable> \"<replaceable>Methodname</replaceable>\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:386
-msgid ""
-"List of compression types which are understood by the acquire methods. "
-"Files like <filename>Packages</filename> can be available in various "
-"compression formats. Per default the acquire methods can decompress "
-"<command>bzip2</command>, <command>lzma</command> and <command>gzip</"
-"command> compressed files, with this setting more formats can be added on "
-"the fly or the used method can be changed. The syntax for this is: "
-"<placeholder type=\"synopsis\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:396
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order:: \"gz\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><synopsis>
-#: apt.conf.5.xml:399
-#, no-wrap
-msgid "Acquire::CompressionTypes::Order { \"lzma\"; \"gz\"; };"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:392
-msgid ""
-"Also the <literal>Order</literal> subgroup can be used to define in which "
-"order the acquire system will try to download the compressed files. The "
-"acquire system will try the first and proceed with the next compression type "
-"in this list on error, so to prefer one over the other type simple add the "
-"preferred type at first - not already added default types will be added at "
-"run time to the end of the list, so e.g. <placeholder type=\"synopsis\" id="
-"\"0\"/> can be used to prefer <command>gzip</command> compressed files over "
-"<command>bzip2</command> and <command>lzma</command>. If <command>lzma</"
-"command> should be preferred over <command>gzip</command> and "
-"<command>bzip2</command> the configure setting should look like this "
-"<placeholder type=\"synopsis\" id=\"1\"/> It is not needed to add "
-"<literal>bz2</literal> explicit to the list as it will be added automatic."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><literallayout>
-#: apt.conf.5.xml:403
-#, no-wrap
-msgid "Dir::Bin::bzip2 \"/bin/bzip2\";"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:401
-msgid ""
-"Note that at run time the <literal>Dir::Bin::<replaceable>Methodname</"
-"replaceable></literal> will be checked: If this setting exists the method "
-"will only be used if this file exists, e.g. for the bzip2 method (the "
-"inbuilt) setting is <placeholder type=\"literallayout\" id=\"0\"/> Note also "
-"that list entries specified on the command line will be added at the end of "
-"the list specified in the configuration files, but before the default "
-"entries. To prefer a type in this case over the ones specified in in the "
-"configuration files you can set the option direct - not in list style. This "
-"will not override the defined list, it will only prefix the list with this "
-"type."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:408
-msgid ""
-"While it is possible to add an empty compression type to the order list, but "
-"APT in its current version doesn't understand it correctly and will display "
-"many warnings about not downloaded files - these warnings are most of the "
-"time false negatives. Future versions will maybe include a way to really "
-"prefer uncompressed files to support the usage of local mirrors."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><term>
-#: apt.conf.5.xml:414
-msgid "Languages"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:415
-msgid ""
-"The Languages subsection controls which <filename>Translation</filename> "
-"files are downloaded and in which order APT tries to display the Description-"
-"Translations. APT will try to display the first available Description in the "
-"Language which is listed at first. Languages can be defined with their short "
-"or long Languagecodes. Note that not all archives provide "
-"<filename>Translation</filename> files for every Language - especially the "
-"long Languagecodes are rare, so please inform you which ones are available "
-"before you set here impossible values."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para><programlisting>
-#: apt.conf.5.xml:431
-#, no-wrap
-msgid "Acquire::Languages { \"environment\"; \"de\"; \"en\"; \"none\"; \"fr\"; };"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:421
-msgid ""
-"The default list includes \"environment\" and \"en\". "
-"\"<literal>environment</literal>\" has a special meaning here: It will be "
-"replaced at runtime with the languagecodes extracted from the "
-"<literal>LC_MESSAGES</literal> environment variable. It will also ensure "
-"that these codes are not included twice in the list. If "
-"<literal>LC_MESSAGES</literal> is set to \"C\" only the "
-"<filename>Translation-en</filename> file (if available) will be used. To "
-"force apt to use no Translation file use the setting <literal>Acquire::"
-"Languages=none</literal>. \"<literal>none</literal>\" is another special "
-"meaning code which will stop the search for a fitting <filename>Translation</"
-"filename> file. This can be used by the system administrator to let APT "
-"know that it should download also this files without actually use them if "
-"the environment doesn't specify this languages. So the following example "
-"configuration will result in the order \"en, de\" in an english and in \"de, "
-"en\" in a german localization. Note that \"fr\" is downloaded, but not used "
-"if APT is not used in a french localization, in such an environment the "
-"order would be \"fr, de, en\". <placeholder type=\"programlisting\" id=\"0"
-"\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:228
-msgid ""
-"The <literal>Acquire</literal> group of options controls the download of "
-"packages and the URI handlers. <placeholder type=\"variablelist\" id=\"0\"/>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:438
-msgid "Directories"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:440
-msgid ""
-"The <literal>Dir::State</literal> section has directories that pertain to "
-"local state information. <literal>lists</literal> is the directory to place "
-"downloaded package lists in and <literal>status</literal> is the name of the "
-"dpkg status file. <literal>preferences</literal> is the name of the APT "
-"preferences file. <literal>Dir::State</literal> contains the default "
-"directory to prefix on all sub items if they do not start with <filename>/</"
-"filename> or <filename>./</filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:447
-msgid ""
-"<literal>Dir::Cache</literal> contains locations pertaining to local cache "
-"information, such as the two package caches <literal>srcpkgcache</literal> "
-"and <literal>pkgcache</literal> as well as the location to place downloaded "
-"archives, <literal>Dir::Cache::archives</literal>. Generation of caches can "
-"be turned off by setting their names to be blank. This will slow down "
-"startup but save disk space. It is probably preferred to turn off the "
-"pkgcache rather than the srcpkgcache. Like <literal>Dir::State</literal> the "
-"default directory is contained in <literal>Dir::Cache</literal>"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:456
-msgid ""
-"<literal>Dir::Etc</literal> contains the location of configuration files, "
-"<literal>sourcelist</literal> gives the location of the sourcelist and "
-"<literal>main</literal> is the default configuration file (setting has no "
-"effect, unless it is done from the config file specified by "
-"<envar>APT_CONFIG</envar>)."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:462
-msgid ""
-"The <literal>Dir::Parts</literal> setting reads in all the config fragments "
-"in lexical order from the directory specified. After this is done then the "
-"main config file is loaded."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:466
-msgid ""
-"Binary programs are pointed to by <literal>Dir::Bin</literal>. <literal>Dir::"
-"Bin::Methods</literal> specifies the location of the method handlers and "
-"<literal>gzip</literal>, <literal>bzip2</literal>, <literal>lzma</literal>, "
-"<literal>dpkg</literal>, <literal>apt-get</literal> <literal>dpkg-source</"
-"literal> <literal>dpkg-buildpackage</literal> and <literal>apt-cache</"
-"literal> specify the location of the respective programs."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:474
-msgid ""
-"The configuration item <literal>RootDir</literal> has a special meaning. If "
-"set, all paths in <literal>Dir::</literal> will be relative to "
-"<literal>RootDir</literal>, <emphasis>even paths that are specified "
-"absolutely</emphasis>. So, for instance, if <literal>RootDir</literal> is "
-"set to <filename>/tmp/staging</filename> and <literal>Dir::State::status</"
-"literal> is set to <filename>/var/lib/dpkg/status</filename>, then the "
-"status file will be looked up in <filename>/tmp/staging/var/lib/dpkg/status</"
-"filename>."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:487
-msgid "APT in DSelect"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:489
-msgid ""
-"When APT is used as a &dselect; method several configuration directives "
-"control the default behaviour. These are in the <literal>DSelect</literal> "
-"section."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:493
-msgid "Clean"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:494
-msgid ""
-"Cache Clean mode; this value may be one of always, prompt, auto, pre-auto "
-"and never. always and prompt will remove all packages from the cache after "
-"upgrading, prompt (the default) does so conditionally. auto removes only "
-"those packages which are no longer downloadable (replaced with a new version "
-"for instance). pre-auto performs this action before downloading new "
-"packages."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:503
-msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the install phase."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:507
-msgid "Updateoptions"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:508
-msgid ""
-"The contents of this variable is passed to &apt-get; as command line options "
-"when it is run for the update phase."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:512
-msgid "PromptAfterUpdate"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:513
-msgid ""
-"If true the [U]pdate operation in &dselect; will always prompt to continue. "
-"The default is to prompt only on error."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><title>
-#: apt.conf.5.xml:519
-msgid "How APT calls dpkg"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><para>
-#: apt.conf.5.xml:520
-msgid ""
-"Several configuration directives control how APT invokes &dpkg;. These are "
-"in the <literal>DPkg</literal> section."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:525
-msgid ""
-"This is a list of options to pass to dpkg. The options must be specified "
-"using the list notation and each list item is passed as a single argument to "
-"&dpkg;."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:530
-msgid "Pre-Invoke"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:530
-msgid "Post-Invoke"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:531
-msgid ""
-"This is a list of shell commands to run before/after invoking &dpkg;. Like "
-"<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
-"fail APT will abort."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
-#: apt.conf.5.xml:537
-msgid "Pre-Install-Pkgs"
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:538
-msgid ""
-"This is a list of shell commands to run before invoking dpkg. Like "
-"<literal>options</literal> this must be specified in list notation. The "
-"commands are invoked in order using <filename>/bin/sh</filename>, should any "
-"fail APT will abort. APT will pass to the commands on standard input the "
-"filenames of all .deb files it is going to install, one per line."
-msgstr ""
-
-#. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
-#: apt.conf.5.xml:544
-msgid ""
-"Version 2 of this protocol dumps more information, including the protocol "
-"version, the APT configuration space and the packages, files and versions "
-"being changed. Version 2 is enabled by setting <literal>DPkg::Tools::"
-"options::cmd::Version</literal> to 2. <literal>cmd</literal> is a command "
-"given to <literal>Pre-Install-Pkgs</literal>."
projects / apt.git / blobdiff