+#: apt-private/acqprogress.cc:301
+#, c-format
+msgid ""
+"Media change: please insert the disc labeled\n"
+" '%s'\n"
+"in the drive '%s' and press enter\n"
+msgstr ""
+"更換媒體：請把以下名稱的光碟\n"
+" '%s'\n"
+"放入 '%s' 裝置，然後按 [Enter] 鍵\n"
+
+#. Only warn if there are no sources.list.d.
+#. Only warn if there is no sources.list file.
+#: methods/mirror.cc:95 apt-pkg/init.cc:113 apt-pkg/init.cc:121
+#: apt-pkg/sourcelist.cc:280 apt-pkg/sourcelist.cc:286 apt-pkg/clean.cc:43
+#: apt-pkg/acquire.cc:557 apt-pkg/policy.cc:381 apt-pkg/contrib/fileutl.cc:374
+#: apt-pkg/contrib/fileutl.cc:487 apt-pkg/contrib/cdromutl.cc:205
+#: apt-inst/extract.cc:471
+#, c-format
+msgid "Unable to read %s"
+msgstr "無法讀取 %s"
+
+#: methods/mirror.cc:101 methods/mirror.cc:130 apt-pkg/clean.cc:49
+#: apt-pkg/clean.cc:67 apt-pkg/clean.cc:130 apt-pkg/acquire.cc:563
+#: apt-pkg/acquire.cc:588 apt-pkg/contrib/cdromutl.cc:201
+#: apt-pkg/contrib/cdromutl.cc:235
+#, c-format
+msgid "Unable to change to %s"
+msgstr "無法切換至 %s"
+
+#. FIXME: fallback to a default mirror here instead
+#. and provide a config option to define that default
+#: methods/mirror.cc:280
+#, c-format
+msgid "No mirror file '%s' found "
+msgstr ""
+
+#. FIXME: fallback to a default mirror here instead
+#. and provide a config option to define that default
+#: methods/mirror.cc:287
+#, fuzzy, c-format
+msgid "Can not read mirror file '%s'"
+msgstr "無法開啟檔案 %s"
+
+#: methods/mirror.cc:315
+#, fuzzy, c-format
+msgid "No entry found in mirror file '%s'"
+msgstr "無法開啟檔案 %s"
+
+#: methods/mirror.cc:445
+#, c-format
+msgid "[Mirror: %s]"
+msgstr ""
+
+#: methods/rsh.cc:102 ftparchive/multicompress.cc:171
+msgid "Failed to create IPC pipe to subprocess"
+msgstr "無法和子程序建立 IPC 管線"
+
+#: methods/rsh.cc:346
+msgid "Connection closed prematurely"
+msgstr "連線突然終止"
+
+#: dselect/install:33
+msgid "Bad default setting!"
+msgstr "錯誤的預設設定！"
+
+#: dselect/install:52 dselect/install:84 dselect/install:88 dselect/install:95
+#: dselect/install:106 dselect/update:45
+msgid "Press enter to continue."
+msgstr "請按 [Enter] 鍵以繼續進行。"
+
+#: dselect/install:92
+msgid "Do you want to erase any previously downloaded .deb files?"
+msgstr "您想移除所有先前下載的 .deb 檔嗎？"
+
+#: dselect/install:102
+#, fuzzy
+msgid "Some errors occurred while unpacking. Packages that were installed"
+msgstr "在解開套件時發生錯誤。我要準備設定"
+
+#: dselect/install:103
+#, fuzzy
+msgid "will be configured. This may result in duplicate errors"
+msgstr "套件已安裝過。這會造成重複錯誤"
+
+#: dselect/install:104
+msgid "or errors caused by missing dependencies. This is OK, only the errors"
+msgstr "或是因為沒有相依關係而造成錯誤。那麼這個錯誤是無關緊要的"
+
+#: dselect/install:105
+msgid ""
+"above this message are important. Please fix them and run [I]nstall again"
+msgstr "以上的訊息相當重要。請修正它們並重新執行安裝[I]"
+
+#: dselect/update:30
+msgid "Merging available information"
+msgstr "整合現有的資料"
+
+#: cmdline/apt-extracttemplates.cc:229
+msgid ""
+"Usage: apt-extracttemplates file1 [file2 ...]\n"
+"\n"
+"apt-extracttemplates is a tool to extract config and template info\n"
+"from debian packages\n"
+"\n"
+"Options:\n"
+" -h This help text\n"
+" -t Set the temp dir\n"
+" -c=? Read this configuration file\n"
+" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+msgstr ""
+"用法：apt-extracttemplates 檔案1 [檔案2 ...]\n"
+"\n"
+"apt-extracttemplates 是用來從 debian 套件中解壓出設定檔和模板資訊\n"
+"的工具\n"
+"\n"
+"選項\n"
+" -h 本幫助訊息。\n"
+" -t 指定暫存目錄\n"
+" -c=? 讀取指定的設定檔\n"
+" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
+
+#: cmdline/apt-extracttemplates.cc:259 apt-pkg/contrib/fileutl.cc:2092
+#, fuzzy, c-format
+msgid "Unable to mkstemp %s"
+msgstr "無法取得 %s 的狀態"
+
+#: cmdline/apt-extracttemplates.cc:264 apt-pkg/pkgcachegen.cc:1385
+#: apt-pkg/contrib/fileutl.cc:2097
+#, c-format
+msgid "Unable to write to %s"
+msgstr "無法寫入 %s"
+
+#: cmdline/apt-extracttemplates.cc:305
+msgid "Cannot get debconf version. Is debconf installed?"
+msgstr "無法取得 debconf 版本。是否有安裝 debconf？"
+
+#: ftparchive/apt-ftparchive.cc:186 ftparchive/apt-ftparchive.cc:370
+msgid "Package extension list is too long"
+msgstr "套件延伸列表過長"
+
+#: ftparchive/apt-ftparchive.cc:188 ftparchive/apt-ftparchive.cc:205
+#: ftparchive/apt-ftparchive.cc:228 ftparchive/apt-ftparchive.cc:282
+#: ftparchive/apt-ftparchive.cc:296 ftparchive/apt-ftparchive.cc:318
+#, c-format
+msgid "Error processing directory %s"
+msgstr "處理目錄 %s 時發生錯誤"
+
+#: ftparchive/apt-ftparchive.cc:280
+msgid "Source extension list is too long"
+msgstr "原始碼的延伸列表太長"
+
+#: ftparchive/apt-ftparchive.cc:400
+msgid "Error writing header to contents file"
+msgstr "寫入標頭資訊到內容檔時發生錯誤"
+
+#: ftparchive/apt-ftparchive.cc:430
+#, c-format
+msgid "Error processing contents %s"
+msgstr "處理內容 %s 時發生錯誤"
+
+#: ftparchive/apt-ftparchive.cc:625
+msgid ""
+"Usage: apt-ftparchive [options] command\n"
+"Commands: packages binarypath [overridefile [pathprefix]]\n"
+" sources srcpath [overridefile [pathprefix]]\n"
+" contents path\n"
+" release path\n"
+" generate config [groups]\n"
+" clean config\n"
+"\n"
+"apt-ftparchive generates index files for Debian archives. It supports\n"
+"many styles of generation from fully automated to functional replacements\n"
+"for dpkg-scanpackages and dpkg-scansources\n"
+"\n"
+"apt-ftparchive generates Package files from a tree of .debs. The\n"
+"Package file contains the contents of all the control fields from\n"
+"each package as well as the MD5 hash and filesize. An override file\n"
+"is supported to force the value of Priority and Section.\n"
+"\n"
+"Similarly apt-ftparchive generates Sources files from a tree of .dscs.\n"
+"The --source-override option can be used to specify a src override file\n"
+"\n"
+"The 'packages' and 'sources' command should be run in the root of the\n"
+"tree. BinaryPath should point to the base of the recursive search and \n"
+"override file should contain the override flags. Pathprefix is\n"
+"appended to the filename fields if present. Example usage from the \n"
+"Debian archive:\n"
+" apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n"
+" dists/potato/main/binary-i386/Packages\n"
+"\n"
+"Options:\n"
+" -h This help text\n"
+" --md5 Control MD5 generation\n"
+" -s=? Source override file\n"
+" -q Quiet\n"
+" -d=? Select the optional caching database\n"
+" --no-delink Enable delinking debug mode\n"
+" --contents Control contents file generation\n"
+" -c=? Read this configuration file\n"
+" -o=? Set an arbitrary configuration option"
+msgstr ""
+"用法：apt-ftparchive [選項] 指令\n"
+"指令：packages 二進制檔搜索路徑 [重新定義檔 [路徑前綴]]\n"
+" sources 原始碼搜索路徑 [重新定義檔 [路徑前綴]]\n"
+" contents 搜索路徑\n"
+" release 搜索路徑\n"
+" generate 設定檔 [群組]\n"
+" clean 設定檔\n"
+"\n"
+"apt-ftparchive 可用來替 Debian 套件庫建立索引檔。它支援了從全\n"
+"自動化到足以替代 dpkg-scanpackages 及 dpkg-scansources 所提供\n"
+"的所有功能等等各式各樣建立索引的方式。apt-ftparchive 會根據 .deb 檔案樹建立 "
+"Package 檔。Package 檔\n"
+"裡不僅包含了每個套件的 control 資料的內容，還包含了 MD5 檢驗\n"
+"碼和檔案大小。它還支援了重新定義檔，可用來強制指定優先等級及\n"
+"其所屬的類別。\n"
+"\n"
+"而同樣的，apt-ftparchive 也能根據 .dsc 檔案樹生成 Source 檔。\n"
+"可用 --source-override 選項來指定一個 src 重新定義檔。\n"
+"\n"
+"應當在檔案樹的根目錄下執行 'packages' 和 'source' 指令。\n"
+"二進制檔的搜索路徑必須指向遞迴搜索的底層，且在重新定義檔裡必\n"
+"須包含 override 旗標。若指定了路徑前綴時，則會被附加到檔案名\n"
+"稱這個欄位裡。以 Debian 套件庫為例:\n"
+" apt-ftparchive packages dists/potato/main/binary-i386/ > \\\n"
+" dists/potato/main/binary-i386/Packages\n"
+"\n"
+"選項：\n"
+" -h 本幫助說明\n"
+" --md5 控制如何產生 MD5 檢驗碼\n"
+" -s=? 原始碼的重新定義檔\n"
+" -q 安靜模式\n"
+" -d=? 指定搭配的快取資料庫\n"
+" --no-delink 啟用 DeLinking 模式\n"
+" --contents 產生控制內容檔\n"
+" -c=? 讀取指定的設定檔\n"
+" -o=? 指定任意的設定選項"
+
+#: ftparchive/apt-ftparchive.cc:821
+msgid "No selections matched"
+msgstr "找不到符合的選項"
+
+#: ftparchive/apt-ftparchive.cc:906
+#, c-format
+msgid "Some files are missing in the package file group `%s'"
+msgstr "套件檔案組 `%s' 少了部份檔案"
+
+#: ftparchive/cachedb.cc:67
+#, c-format
+msgid "DB was corrupted, file renamed to %s.old"
+msgstr "DB 已損毀，檔案被更名為 %s.old"
+
+#: ftparchive/cachedb.cc:85
+#, c-format
+msgid "DB is old, attempting to upgrade %s"
+msgstr "DB 過舊，嘗試升級 %s"
+
+#: ftparchive/cachedb.cc:96
+#, fuzzy
+msgid ""
+"DB format is invalid. If you upgraded from an older version of apt, please "
+"remove and re-create the database."
+msgstr ""
+"資料庫格式不正確。如果您是由舊版的 apt 升級上來的，請移除並重新建立資料庫。"
+
+#: ftparchive/cachedb.cc:101
+#, c-format
+msgid "Unable to open DB file %s: %s"
+msgstr "無法開啟 DB 檔 %s: %s"
+
+#: ftparchive/cachedb.cc:184 apt-inst/extract.cc:186 apt-inst/extract.cc:199
+#: apt-inst/extract.cc:216
+#, c-format
+msgid "Failed to stat %s"
+msgstr "無法取得 %s 的狀態"
+
+#: ftparchive/cachedb.cc:326
+#, fuzzy
+msgid "Failed to read .dsc"
+msgstr "無法讀取連結 %s"
+
+#: ftparchive/cachedb.cc:359
+msgid "Archive has no control record"
+msgstr "套件檔沒有 control 記錄"
+
+#: ftparchive/cachedb.cc:526
+msgid "Unable to get a cursor"
+msgstr "無法取得遊標"
+
+#: ftparchive/writer.cc:104
+#, c-format
+msgid "W: Unable to read directory %s\n"
+msgstr "警告：無法讀取目錄 %s\n"
+
+#: ftparchive/writer.cc:109
+#, c-format
+msgid "W: Unable to stat %s\n"
+msgstr "警告：無法取得 %s 狀態\n"
+
+#: ftparchive/writer.cc:165
+msgid "E: "
+msgstr "錯誤："
+
+#: ftparchive/writer.cc:167
+msgid "W: "
+msgstr "警告："
+
+#: ftparchive/writer.cc:174
+msgid "E: Errors apply to file "
+msgstr "錯誤：套用到檔案時發生錯誤"
+
+#: ftparchive/writer.cc:192 ftparchive/writer.cc:224
+#, c-format
+msgid "Failed to resolve %s"
+msgstr "無法解析 %s"
+
+#: ftparchive/writer.cc:205
+msgid "Tree walking failed"
+msgstr "無法走訪目錄樹"
+
+#: ftparchive/writer.cc:232
+#, c-format
+msgid "Failed to open %s"
+msgstr "無法開啟 %s"
+
+#: ftparchive/writer.cc:291
+#, c-format
+msgid " DeLink %s [%s]\n"
+msgstr " DeLink %s [%s]\n"
+
+#: ftparchive/writer.cc:299
+#, c-format
+msgid "Failed to readlink %s"
+msgstr "無法讀取連結 %s"
+
+#: ftparchive/writer.cc:303
+#, c-format
+msgid "Failed to unlink %s"
+msgstr "無法移除連結 %s"
+
+#: ftparchive/writer.cc:311
+#, c-format
+msgid "*** Failed to link %s to %s"
+msgstr "*** 無法將 %s 連結到 %s"
+
+#: ftparchive/writer.cc:321
+#, c-format
+msgid " DeLink limit of %sB hit.\n"
+msgstr " 達到了 DeLink 的上限 %sB。\n"
+
+#: ftparchive/writer.cc:427
+msgid "Archive had no package field"
+msgstr "套件檔裡沒有套件資訊"
+
+#: ftparchive/writer.cc:435 ftparchive/writer.cc:698
+#, c-format
+msgid " %s has no override entry\n"
+msgstr " %s 沒有重新定義項目\n"
+
+#: ftparchive/writer.cc:502 ftparchive/writer.cc:862
+#, c-format
+msgid " %s maintainer is %s not %s\n"
+msgstr " %s 的維護者是 %s，而非 %s\n"
+
+#: ftparchive/writer.cc:712
+#, c-format
+msgid " %s has no source override entry\n"
+msgstr " %s 沒有原始碼重新定義項目\n"
+
+#: ftparchive/writer.cc:716
+#, c-format
+msgid " %s has no binary override entry either\n"
+msgstr " %s 也沒有二元碼重新定義項目\n"
+
+#: ftparchive/contents.cc:351 ftparchive/contents.cc:382
+msgid "realloc - Failed to allocate memory"
+msgstr "realloc - 無法配置記憶體"
+
+#: ftparchive/override.cc:38 ftparchive/override.cc:142
+#, c-format
+msgid "Unable to open %s"
+msgstr "無法開啟 %s"
+
+#. skip spaces
+#. find end of word
+#: ftparchive/override.cc:68
+#, fuzzy, c-format
+msgid "Malformed override %s line %llu (%s)"
+msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #1"
+
+#: ftparchive/override.cc:127 ftparchive/override.cc:201
+#, c-format
+msgid "Failed to read the override file %s"
+msgstr "無法讀取重新定義檔 %s"
+
+#: ftparchive/override.cc:166
+#, fuzzy, c-format
+msgid "Malformed override %s line %llu #1"
+msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #1"
+
+#: ftparchive/override.cc:178
+#, fuzzy, c-format
+msgid "Malformed override %s line %llu #2"
+msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #2"
+
+#: ftparchive/override.cc:191
+#, fuzzy, c-format
+msgid "Malformed override %s line %llu #3"
+msgstr "重新定義檔 %s 第 %lu 行的格式錯誤 #3"
+
+#: ftparchive/multicompress.cc:73
+#, c-format
+msgid "Unknown compression algorithm '%s'"
+msgstr "未知的壓縮演算法 '%s'"
+
+#: ftparchive/multicompress.cc:103
+#, c-format
+msgid "Compressed output %s needs a compression set"
+msgstr "要壓縮輸出 %s 需搭配壓縮動作"
+
+#: ftparchive/multicompress.cc:192
+msgid "Failed to create FILE*"
+msgstr "無法建立 FILE*"
+
+#: ftparchive/multicompress.cc:195
+msgid "Failed to fork"
+msgstr "fork 時失敗"
+
+#: ftparchive/multicompress.cc:209
+msgid "Compress child"
+msgstr "壓縮子程序"
+
+#: ftparchive/multicompress.cc:232
+#, c-format
+msgid "Internal error, failed to create %s"
+msgstr "內部錯誤，無法建立 %s"
+
+#: ftparchive/multicompress.cc:305
+msgid "IO to subprocess/file failed"
+msgstr "和子程序/檔案 IO 失敗"
+
+#: ftparchive/multicompress.cc:343
+msgid "Failed to read while computing MD5"
+msgstr "在計算 MD5 時無法讀取到資料"
+
+#: ftparchive/multicompress.cc:359
+#, c-format
+msgid "Problem unlinking %s"
+msgstr "在取消 %s 的連結時發生問題"
+
+#: ftparchive/multicompress.cc:374 apt-inst/extract.cc:194
+#, c-format
+msgid "Failed to rename %s to %s"
+msgstr "無法將 %s 更名為 %s"
+
+#: cmdline/apt-internal-solver.cc:51
+#, fuzzy
+msgid ""
+"Usage: apt-internal-solver\n"
+"\n"
+"apt-internal-solver is an interface to use the current internal\n"
+"like an external resolver for the APT family for debugging or alike\n"
+"\n"
+"Options:\n"
+" -h This help text.\n"
+" -q Loggable output - no progress indicator\n"
+" -c=? Read this configuration file\n"
+" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+msgstr ""
+"用法：apt-extracttemplates 檔案1 [檔案2 ...]\n"
+"\n"
+"apt-extracttemplates 是用來從 debian 套件中解壓出設定檔和模板資訊\n"
+"的工具\n"
+"\n"
+"選項\n"
+" -h 本幫助訊息。\n"
+" -t 指定暫存目錄\n"
+" -c=? 讀取指定的設定檔\n"
+" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
+
+#: cmdline/apt-sortpkgs.cc:91
+msgid "Unknown package record!"
+msgstr "未知的套件記錄！"
+
+#: cmdline/apt-sortpkgs.cc:155
+msgid ""
+"Usage: apt-sortpkgs [options] file1 [file2 ...]\n"
+"\n"
+"apt-sortpkgs is a simple tool to sort package files. The -s option is used\n"
+"to indicate what kind of file it is.\n"
+"\n"
+"Options:\n"
+" -h This help text\n"
+" -s Use source file sorting\n"
+" -c=? Read this configuration file\n"
+" -o=? Set an arbitrary configuration option, eg -o dir::cache=/tmp\n"
+msgstr ""
+"用法：apt-sortpkgs [選項] 檔案1 [檔案2 ...]\n"
+"\n"
+"apt-sortpkgs 是用來排序套件檔的簡單工具。-s 選項是用來指定它的檔案類型。\n"
+"\n"
+"選項：\n"
+" -h 本幫助訊息。\n"
+" -s 根據原始檔排序\n"
+" -c=? 讀取指定的設定檔\n"
+" -o=? 指定任意的設定選項，例如:-o dir::cache=/tmp\n"
+
+#: apt-pkg/install-progress.cc:59
+#, c-format
+msgid "Progress: [%3i%%]"
+msgstr ""
+
+#: apt-pkg/install-progress.cc:93 apt-pkg/install-progress.cc:176
+msgid "Running dpkg"
+msgstr ""
+
+#: apt-pkg/init.cc:156
+#, c-format
+msgid "Packaging system '%s' is not supported"
+msgstr "不支援的套件包裝系統 '%s'"
+
+#: apt-pkg/init.cc:172
+msgid "Unable to determine a suitable packaging system type"
+msgstr "無法確認合適的套件包裝系統類型"
+
+#: apt-pkg/indexcopy.cc:236 apt-pkg/indexcopy.cc:775
+#, c-format
+msgid "Wrote %i records.\n"
+msgstr "寫入 %i 筆紀錄。\n"
+
+#: apt-pkg/indexcopy.cc:238 apt-pkg/indexcopy.cc:777
+#, c-format
+msgid "Wrote %i records with %i missing files.\n"
+msgstr "寫入 %i 筆紀綠，其中有 %i 個檔案遺失了。\n"
+
+#: apt-pkg/indexcopy.cc:241 apt-pkg/indexcopy.cc:780
+#, c-format
+msgid "Wrote %i records with %i mismatched files\n"
+msgstr "寫入 %i 筆紀綠，其中有 %i 個檔案不符\n"
+
+#: apt-pkg/indexcopy.cc:244 apt-pkg/indexcopy.cc:783
+#, c-format
+msgid "Wrote %i records with %i missing files and %i mismatched files\n"
+msgstr "寫入 %i 筆紀綠，其中有 %i 個檔案遺失了，有 %i 個檔案不符\n"
+
+#: apt-pkg/indexcopy.cc:515
+#, c-format
+msgid "Can't find authentication record for: %s"
+msgstr ""
+
+#: apt-pkg/indexcopy.cc:521
+#, fuzzy, c-format
+msgid "Hash mismatch for: %s"
+msgstr "Hash Sum 不符"
+
+#: apt-pkg/acquire-worker.cc:133
+#, c-format
+msgid "The method driver %s could not be found."
+msgstr "找不到安裝方式的驅動程式 %s。"
+
+#: apt-pkg/acquire-worker.cc:135
+#, fuzzy, c-format
+msgid "Is the package %s installed?"
+msgstr "請檢查是否已安裝了 'dpkg-dev' 套件。\n"
+
+#: apt-pkg/acquire-worker.cc:186
+#, c-format
+msgid "Method %s did not start correctly"
+msgstr "安裝方式 %s 沒有正確啟動"
+
+#: apt-pkg/acquire-worker.cc:485
+#, c-format
+msgid "Please insert the disc labeled: '%s' in the drive '%s' and press enter."
+msgstr "請把標籤為 '%s' 的光碟放入 '%s' 裝置中，然後按下 [Enter] 鍵。"
+
+#: apt-pkg/cachefile.cc:94
+msgid "The package lists or status file could not be parsed or opened."
+msgstr "無法分析或開啟套件清單或狀況檔。"
+
+#: apt-pkg/cachefile.cc:98
+msgid "You may want to run apt-get update to correct these problems"
+msgstr "您也許得執行 apt-get update 以修正這些問題"
+
+#: apt-pkg/cachefile.cc:116
+msgid "The list of sources could not be read."
+msgstr "無法讀取來源列表。"
+
+#: apt-pkg/pkgcache.cc:154
+msgid "Empty package cache"
+msgstr "清空套件快取"
+
+#: apt-pkg/pkgcache.cc:160 apt-pkg/pkgcache.cc:171
+msgid "The package cache file is corrupted"
+msgstr "套件快取檔損壞"
+
+#: apt-pkg/pkgcache.cc:165
+msgid "The package cache file is an incompatible version"
+msgstr "套件快取檔版本不符"
+
+#: apt-pkg/pkgcache.cc:168
+#, fuzzy
+msgid "The package cache file is corrupted, it is too small"
+msgstr "套件快取檔損壞"
+
+#: apt-pkg/pkgcache.cc:175
projects / apt.git / blobdiff