fi
fi
-
if [ "$MSGCOLOR" != 'NO' ]; then
CERROR="\033[1;31m" # red
CWARNING="\033[1;33m" # yellow
aptcache() { runapt apt-cache "$@"; }
aptcdrom() { runapt apt-cdrom "$@"; }
aptget() { runapt apt-get "$@"; }
-aptftparchive() { runapt apt-ftparchive "$@"; }
+aptftparchive() { runapt "${APTFTPARCHIVEBINDIR}/apt-ftparchive" "$@"; }
aptkey() { runapt apt-key "$@"; }
aptmark() { runapt apt-mark "$@"; }
aptsortpkgs() { runapt apt-sortpkgs "$@"; }
aptextracttemplates() { runapt apt-extracttemplates "$@"; }
aptinternalsolver() { runapt "${APTINTERNALSOLVER}" "$@"; }
aptdumpsolver() { runapt "${APTDUMPSOLVER}" "$@"; }
+aptinternalplanner() { runapt "${APTINTERNALPLANNER}" "$@"; }
dpkg() {
"${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg" "$@"
if [ "${CMD##*/}" = "$CMD" ]; then
CMD="${BUILDDIRECTORY}/${CMD}"
fi
- runapt command gdb --quiet -ex run "$CMD" --args "$CMD" "$@"
+ runapt command gdb --quiet -ex "directory '$SOURCEDIRECTORY'" -ex run "$CMD" --args "$CMD" "$@"
}
lastmodification() {
- date -u -d "@$(stat -c '%Y' "${TMPWORKINGDIRECTORY}/$1")" '+%a, %d %b %Y %H:%M:%S GMT'
+ date -u -d "@$(stat -c '%Y' "${TMPWORKINGDIRECTORY}/$1")" -R
}
releasefiledate() {
- grep "^${2:-Date}:" "$1" | cut -d' ' -f 2- | sed -e 's#UTC#GMT#'
+ grep "^${2:-Date}:" "$1" | cut -d' ' -f 2-
}
exitwithstatus() {
echo "$@" | sed -e "s#'#'\"'\"'#g"
}
+find_project_binary_dir() {
+ local TESTDIRECTORY="$(readlink -f "$(dirname $0)")"
+ if [ -z "$PROJECT_BINARY_DIR" ]; then
+ PROJECT_BINARY_DIR=
+ for dir in ${TESTDIRECTORY}/../../ ${TESTDIRECTORY}/../../*; do
+ test -e "$dir/CMakeCache.txt" || continue
+ if [ -z "$PROJECT_BINARY_DIR" ] ||
+ [ "$dir/CMakeCache.txt" -nt "$PROJECT_BINARY_DIR/CMakeCache.txt" ]; then
+ PROJECT_BINARY_DIR="$dir"
+ fi
+ done
+ if [ -z "$PROJECT_BINARY_DIR" ]; then
+ echo "Cannot find build directory, you might want to set PROJECT_BINARY_DIR" >&2
+ exit 1
+ fi
+ export PROJECT_BINARY_DIR
+ fi
+}
setupenvironment() {
+ # Next check needs a gnu stat, let's figure that out early.
+ stat=stat
+ if command -v gnustat >/dev/null 2>&1; then
+ stat=gnustat
+ fi
# privilege dropping and testing doesn't work if /tmp isn't world-writeable (as e.g. with libpam-tmpdir)
- if [ -n "$TMPDIR" ] && [ "$(id -u)" = '0' ] && [ "$(stat --format '%a' "$TMPDIR")" != '1777' ]; then
+ if [ -n "$TMPDIR" ] && [ "$(id -u)" = '0' ] && [ "$($stat --format '%a' "$TMPDIR")" != '1777' ]; then
unset TMPDIR
fi
TMPWORKINGDIRECTORY="$(mktemp -d)"
fi
msgninfo "Preparing environment for ${0##*/} in ${TMPWORKINGDIRECTORY}…"
+ # Setup coreutils on BSD systems
+ mkdir "${TMPWORKINGDIRECTORY}/bin"
+ for prefix in gnu g; do
+ for command in stat touch sed cp tr sha1sum sha256sum md5sum sha512sum grep date wc chmod head readlink tar expr base64; do
+ if command -v $prefix$command 2>/dev/null >/dev/null; then
+ [ -e "${TMPWORKINGDIRECTORY}/bin/$command" ] || ln -sf $(command -v $prefix$command) "${TMPWORKINGDIRECTORY}/bin/$command"
+ fi
+ done
+ done
+ export PATH="${TMPWORKINGDIRECTORY}/bin/:$PATH"
+
+
mkdir -m 700 "${TMPWORKINGDIRECTORY}/downloaded"
if [ "$(id -u)" = '0' ]; then
# relax permissions so that running as root with user switching works
fi
TESTDIRECTORY="$(readlink -f "$(dirname $0)")"
+ # Find the newest build directory (sets PROJECT_BINARY_DIR)
+ find_project_binary_dir
# allow overriding the default BUILDDIR location
SOURCEDIRECTORY="${APT_INTEGRATION_TESTS_SOURCE_DIR:-"${TESTDIRECTORY}/../../"}"
- BUILDDIRECTORY="${APT_INTEGRATION_TESTS_BUILD_DIR:-"${TESTDIRECTORY}/../../build/bin"}"
- LIBRARYPATH="${APT_INTEGRATION_TESTS_LIBRARY_PATH:-"${BUILDDIRECTORY}"}"
- METHODSDIR="${APT_INTEGRATION_TESTS_METHODS_DIR:-"${BUILDDIRECTORY}/methods"}"
+ BUILDDIRECTORY="${APT_INTEGRATION_TESTS_BUILD_DIR:-"${PROJECT_BINARY_DIR}/cmdline"}"
+ LIBRARYPATH="${APT_INTEGRATION_TESTS_LIBRARY_PATH:-"${BUILDDIRECTORY}/../apt-pkg"}"
+ METHODSDIR="${APT_INTEGRATION_TESTS_METHODS_DIR:-"${BUILDDIRECTORY}/../methods"}"
APTHELPERBINDIR="${APT_INTEGRATION_TESTS_LIBEXEC_DIR:-"${BUILDDIRECTORY}"}"
- APTWEBSERVERBINDIR="${APT_INTEGRATION_TESTS_WEBSERVER_BIN_DIR:-"${BUILDDIRECTORY}"}"
- APTINTERNALSOLVER="${APT_INTEGRATION_TESTS_INTERNAL_SOLVER:-"${BUILDDIRECTORY}/apt-internal-solver"}"
- APTDUMPSOLVER="${APT_INTEGRATION_TESTS_DUMP_SOLVER:-"${BUILDDIRECTORY}/apt-dump-solver"}"
+ APTWEBSERVERBINDIR="${APT_INTEGRATION_TESTS_WEBSERVER_BIN_DIR:-"${BUILDDIRECTORY}/../test/interactive-helper"}"
+ APTFTPARCHIVEBINDIR="${APT_INTEGRATION_TESTS_FTPARCHIVE_BIN_DIR:-"${BUILDDIRECTORY}/../ftparchive"}"
+ APTINTERNALSOLVER="${APT_INTEGRATION_TESTS_INTERNAL_SOLVER:-"${BUILDDIRECTORY}/solvers/apt"}"
+ APTDUMPSOLVER="${APT_INTEGRATION_TESTS_DUMP_SOLVER:-"${BUILDDIRECTORY}/solvers/dump"}"
+ APTINTERNALPLANNER="${APT_INTEGRATION_TESTS_INTERNAL_PLANNER:-"${BUILDDIRECTORY}/planners/apt"}"
test -x "${BUILDDIRECTORY}/apt-get" || msgdie "You need to build tree first"
# -----
mkdir rootdir aptarchive keys
cd rootdir
mkdir -p etc/apt/apt.conf.d etc/apt/sources.list.d etc/apt/trusted.gpg.d etc/apt/preferences.d
- mkdir -p usr/bin var/cache var/lib var/log tmp
+ mkdir -p usr/bin var/cache var/lib var/log var/crash tmp
mkdir -p var/lib/dpkg/info var/lib/dpkg/updates var/lib/dpkg/triggers
+ mkdir -p usr/lib/apt/solvers usr/lib/apt/planners
touch var/lib/dpkg/available
- mkdir -p usr/lib/apt
ln -s "${METHODSDIR}" usr/lib/apt/methods
- if [ "$BUILDDIRECTORY" = "$LIBRARYPATH" ]; then
- mkdir -p usr/lib/apt/solvers
- ln -s "${BUILDDIRECTORY}/apt-dump-solver" usr/lib/apt/solvers/dump
- ln -s "${BUILDDIRECTORY}/apt-internal-solver" usr/lib/apt/solvers/apt
- echo "Dir::Bin::Solvers \"${TMPWORKINGDIRECTORY}/rootdir/usr/lib/apt/solvers\";" > etc/apt/apt.conf.d/externalsolver.conf
- fi
+ ln -s "${APTDUMPSOLVER}" usr/lib/apt/solvers/dump
+ ln -s "${APTDUMPSOLVER}" usr/lib/apt/planners/dump
+ ln -s "${APTINTERNALSOLVER}" usr/lib/apt/solvers/apt
+ ln -s "${APTINTERNALPLANNER}" usr/lib/apt/planners/apt
+ echo "Dir::Bin::Solvers \"${TMPWORKINGDIRECTORY}/rootdir/usr/lib/apt/solvers\";" >> ../aptconfig.conf
+ echo "Dir::Bin::Planners \"${TMPWORKINGDIRECTORY}/rootdir/usr/lib/apt/planners\";" >> ../aptconfig.conf
# use the autoremove from the BUILDDIRECTORY if its there, otherwise
# system
- if [ -e "${BUILDDIRECTORY}/../../debian/apt.conf.autoremove" ]; then
- ln -s "${BUILDDIRECTORY}/../../debian/apt.conf.autoremove" etc/apt/apt.conf.d/01autoremove
+ if [ -z "${APT_INTEGRATION_TESTS_SOURCE_DIR}" ]; then
+ ln -s "${SOURCEDIRECTORY}/debian/apt.conf.autoremove" etc/apt/apt.conf.d/01autoremove
else
ln -s /etc/apt/apt.conf.d/01autoremove etc/apt/apt.conf.d/01autoremove
fi
chmod 644 keys/*
ln -s "${TMPWORKINGDIRECTORY}/keys/joesixpack.pub" rootdir/etc/apt/trusted.gpg.d/joesixpack.gpg
- echo "Dir \"${TMPWORKINGDIRECTORY}/rootdir\";" > aptconfig.conf
- echo "Dir::state::status \"${TMPWORKINGDIRECTORY}/rootdir/var/lib/dpkg/status\";" >> aptconfig.conf
+ echo "Dir \"${TMPWORKINGDIRECTORY}/rootdir\";" >> aptconfig.conf
+ echo "Dir::Etc \"etc\";" >> aptconfig.conf
+ echo "Dir::State \"var/lib/apt\";" >> aptconfig.conf
+ echo "Dir::Cache \"var/cache/apt\";" >> aptconfig.conf
+ echo "Dir::Etc \"etc/apt\";" >> aptconfig.conf
+ echo "Dir::Log \"var/log/apt\";" >> aptconfig.conf
echo "APT::Get::Show-User-Simulation-Note \"false\";" >> aptconfig.conf
echo "Dir::Bin::Methods \"${TMPWORKINGDIRECTORY}/rootdir/usr/lib/apt/methods\";" >> aptconfig.conf
# either store apt-key were we can access it, even if we run it as a different user
echo 'Binary::gpgv::APT::Sandbox::User "root";' >> aptconfig.conf
# same for the solver executables
echo 'APT::Solver::RunAsUser "root";' >> aptconfig.conf
+ echo 'APT::Planner::RunAsUser "root";' >> aptconfig.conf
fi
cat > "${TMPWORKINGDIRECTORY}/rootdir/usr/bin/dpkg" <<EOF
fi
echo "Acquire::https::CaInfo \"${TMPWORKINGDIRECTORY}/rootdir/etc/webserver.pem\";" > rootdir/etc/apt/apt.conf.d/99https
echo "Apt::Cmd::Disable-Script-Warning \"1\";" > rootdir/etc/apt/apt.conf.d/apt-binary
+ export APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=no
echo 'Acquire::Connect::AddrConfig "false";' > rootdir/etc/apt/apt.conf.d/connect-addrconfig
configcompression '.' 'gz' #'bz2' 'lzma' 'xz'
# cleanup the environment a bit
# prefer our apt binaries over the system apt binaries
export PATH="${BUILDDIRECTORY}:${PATH}:/usr/local/sbin:/usr/sbin:/sbin"
- export LC_ALL=C.UTF-8
+ export LC_ALL=C
unset LANGUAGE APT_CONFIG
unset GREP_OPTIONS DEB_BUILD_PROFILES
unset http_proxy HTTP_PROXY https_proxy HTTPS_PROXY no_proxy
# most tests just need one signed Release file, not both
export APT_DONT_SIGN='Release.gpg'
+ if [ -r "${TESTDIRECTORY}/extra-environment" ]; then
+ . "${TESTDIRECTORY}/extra-environment"
+ fi
+
msgdone "info"
}
rm -f rootdir/etc/apt/apt.conf.d/00foreigndpkg
if command dpkg --assert-multi-arch >/dev/null 2>&1 ; then
local ARCHS="$(getarchitectures)"
- if echo "$ARCHS" | grep -E -q '[^ ]+ [^ ]+'; then
- DPKGARCH="$(dpkg --print-architecture)"
- for ARCH in ${ARCHS}; do
- if [ "${ARCH}" != "${DPKGARCH}" ]; then
- if ! dpkg --add-architecture ${ARCH} >/dev/null 2>&1; then
- # old-style used e.g. in Ubuntu-P – and as it seems travis
- echo "DPKG::options:: \"--foreign-architecture\";" >> rootdir/etc/apt/apt.conf.d/00foreigndpkg
- echo "DPKG::options:: \"${ARCH}\";" >> rootdir/etc/apt/apt.conf.d/00foreigndpkg
- fi
+ local DPKGARCH="$(dpkg --print-architecture)"
+ # this ensures that even if multi-arch isn't active in the view
+ # of apt, given that dpkg can't be told which arch is native
+ # the arch apt treats as native might be foreign for dpkg
+ for ARCH in ${ARCHS}; do
+ if [ "${ARCH}" != "${DPKGARCH}" ]; then
+ if ! dpkg --add-architecture ${ARCH} >/dev/null 2>&1; then
+ # old-style used e.g. in Ubuntu-P – and as it seems travis
+ echo "DPKG::options:: \"--foreign-architecture\";" >> rootdir/etc/apt/apt.conf.d/00foreigndpkg
+ echo "DPKG::options:: \"${ARCH}\";" >> rootdir/etc/apt/apt.conf.d/00foreigndpkg
fi
- done
+ fi
+ done
+ # if multi-arch make sure dpkg can detect itself as capable of it
+ if echo "$ARCHS" | grep -E -q '[^ ]+ [^ ]+'; then
if [ "0" = "$(dpkg -l dpkg 2> /dev/null | grep '^i' | wc -l)" ]; then
# dpkg doesn't really check the version as long as it is fully installed,
# but just to be sure we choose one above the required version
done
}
-setupsimplenativepackage() {
+_setupsimplenativepackage() {
local NAME="$1"
local ARCH="$2"
local VERSION="$3"
local DESCRIPTION="${6:-"an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
If you find such a package installed on your system,
something went horribly wrong! They are autogenerated
- und used only by testcases and serve no other purpose…"}"
-
- local SECTION="${7:-others}"
- local DISTSECTION
- if [ "$SECTION" = "${SECTION#*/}" ]; then
- DISTSECTION="main"
- else
- DISTSECTION="${SECTION%/*}"
- fi
- local BUILDDIR=incoming/${NAME}-${VERSION}
- mkdir -p ${BUILDDIR}/debian/source
- cd ${BUILDDIR}
- echo "* most suckless software product ever" > FEATURES
- test -e debian/copyright || echo "Copyleft by Joe Sixpack $(date -u +%Y)" > debian/copyright
- test -e debian/changelog || echo "$NAME ($VERSION) $RELEASE; urgency=low
-
- * Initial release
-
- -- Joe Sixpack <joe@example.org> $(date -u -R)" > debian/changelog
- test -e debian/control || echo "Source: $NAME
-Section: $SECTION
-Priority: optional
-Maintainer: Joe Sixpack <joe@example.org>
-Build-Depends: debhelper (>= 7)
-Standards-Version: 3.9.1
-
-Package: $NAME" > debian/control
- if [ "$ARCH" = 'all' ]; then
- echo "Architecture: all" >> debian/control
- else
- echo "Architecture: any" >> debian/control
- fi
- test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> debian/control
- echo "Description: $DESCRIPTION" >> debian/control
-
- test -e debian/compat || echo "7" > debian/compat
- test -e debian/source/format || echo "3.0 (native)" > debian/source/format
- test -e debian/rules || cp /usr/share/doc/debhelper/examples/rules.tiny debian/rules
- cd - > /dev/null
-}
-
-buildsimplenativepackage() {
- local NAME="$1"
- local NM
- if [ "$(echo "$NAME" | cut -c 1-3)" = 'lib' ]; then
- NM="$(echo "$NAME" | cut -c 1-4)"
- else
- NM="$(echo "$NAME" | cut -c 1)"
- fi
- local ARCH="$2"
- local VERSION="$3"
- local RELEASE="${4:-unstable}"
- local DEPENDENCIES="$5"
- local DESCRIPTION="${6:-"an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
- If you find such a package installed on your system,
- something went horribly wrong! They are autogenerated
und used only by testcases and serve no other purpose…"}"
local SECTION="${7:-others}"
fi
local BUILDDIR="${TMPWORKINGDIRECTORY}/incoming/${NAME}-${VERSION}"
- msgtest "Build source package in version ${VERSION} for ${RELEASE} in ${DISTSECTION}" "$NAME"
mkdir -p "$BUILDDIR/debian/source"
echo "* most suckless software product ever" > "${BUILDDIR}/FEATURES"
echo "#!/bin/sh
} > "${BUILDDIR}/debian/control"
echo '3.0 (native)' > "${BUILDDIR}/debian/source/format"
+}
+
+setupsimplenativepackage() {
+ _setupsimplenativepackage "$@"
+ local NAME="$1"
+ local VERSION="$3"
+ local BUILDDIR="${TMPWORKINGDIRECTORY}/incoming/${NAME}-${VERSION}"
+ test -e "${BUILDDIR}/debian/compat" || echo '7' > "${BUILDDIR}/debian/compat"
+ test -e "${BUILDDIR}/debian/rules" || cp /usr/share/doc/debhelper/examples/rules.tiny "${BUILDDIR}/debian/rules"
+}
+
+buildsimplenativepackage() {
+ local NAME="$1"
+ local ARCH="$2"
+ local VERSION="$3"
+ local RELEASE="${4:-unstable}"
+ local DEPENDENCIES="$5"
+ local DESCRIPTION="$6"
+ local SECTION="${7:-others}"
+ local PRIORITY="${8:-optional}"
+ local FILE_TREE="$9"
+ local COMPRESS_TYPE="${10:-gzip}"
+ local DISTSECTION
+ if [ "$SECTION" = "${SECTION#*/}" ]; then
+ DISTSECTION="main"
+ else
+ DISTSECTION="${SECTION%/*}"
+ fi
+ local BUILDDIR="${TMPWORKINGDIRECTORY}/incoming/${NAME}-${VERSION}"
+ msgtest "Build source package in version ${VERSION} for ${RELEASE} in ${DISTSECTION}" "$NAME"
+ _setupsimplenativepackage "$@"
cd "${BUILDDIR}/.."
testsuccess --nomsg dpkg-source -b ${NAME}-${VERSION}
cd - >/dev/null
echo "pool/${NAME}_${VERSION}_${arch}.deb" >> "${BUILDDIR}/../${RELEASE}.${DISTSECTION}.pkglist"
done
+ local NM
+ if [ "$(echo "$NAME" | cut -c 1-3)" = 'lib' ]; then
+ NM="$(echo "$NAME" | cut -c 1-4)"
+ else
+ NM="$(echo "$NAME" | cut -c 1)"
+ fi
local CHANGEPATH="${BUILDDIR}/../${DISTSECTION}/${NM}/${NAME}/${NAME}_${VERSION}"
mkdir -p "$CHANGEPATH"
cp "${BUILDDIR}/debian/changelog" "$CHANGEPATH"
fi
if [ -n "$DATE" -a "$DATE" != "now" ]; then
for release in $(find ./aptarchive -name 'Release'); do
- sed -i "s/^Date: .*$/Date: $(date -u -d "$DATE" '+%a, %d %b %Y %H:%M:%S %Z')/" "$release"
+ sed -i "s/^Date: .*$/Date: $(date -u -d "$DATE" -R)/" "$release"
touch -d "$DATE" "$release"
done
fi
if [ -n "$VALIDUNTIL" ]; then
sed -i "/^Date: / a\
-Valid-Until: $(date -u -d "$VALIDUNTIL" '+%a, %d %b %Y %H:%M:%S %Z')" $(find ./aptarchive -name 'Release')
+Valid-Until: $(date -u -d "$VALIDUNTIL" -R)" $(find ./aptarchive -name 'Release')
fi
msgdone "info"
}
}
redatereleasefiles() {
- local DATE="$(date -u -d "$1" '+%a, %d %b %Y %H:%M:%S %Z')"
+ local DATE="$(date -u -d "$1" -R)"
for release in $(find aptarchive/ -name 'Release'); do
sed -i "s/^Date: .*$/Date: ${DATE}/" "$release"
touch -d "$DATE" "$release"
local MSG="$1"
local OUTPUT="$2"
shift 2
- if [ "$1" = 'grep' ]; then
+ local CMD="$1"
+ if [ "$1" = 'grep' -o "$1" = 'tail' -o "$1" = 'head' ]; then
echo >&2
while [ -n "$2" ]; do shift; done
echo "#### Complete file: $1 ####"
catfile "$1"
- echo '#### grep output ####'
+ echo "#### $CMD output ####"
elif [ "$1" = 'test' ]; then
echo >&2
# doesn't support ! or non-file flags
msggroup
}
-createlistofkeys() {
- local OUTPUT="$1"
- shift
+mapkeynametokeyid() {
while [ -n "$1" ]; do
- # gpg 2.1.something starts printing [SC] at some point
- if grep -q ' rsa2048/' "$OUTPUT" && grep -qF '[SC]' "$OUTPUT"; then
- case "$1" in
- *Joe*|*Sixpack*) echo 'pub rsa2048/DBAC8DAE 2010-08-18 [SC]';;
- *Rex*|*Expired*) echo 'pub rsa2048/27CE74F9 2013-07-12 [SC] [expired: 2013-07-13]';;
- *Marvin*|*Paranoid*) echo 'pub rsa2048/528144E2 2011-01-16 [SC]';;
- oldarchive) echo 'pub rsa1024/F68C85A3 2013-12-19 [SC]';;
- newarchive) echo 'pub rsa2048/DBAC8DAE 2010-08-18 [SC]';;
- *) echo 'UNKNOWN KEY';;
- esac
- # gpg 2.1 has a slightly different output format
- elif grep -q ' rsa2048/' "$OUTPUT"; then
- case "$1" in
- *Joe*|*Sixpack*) echo 'pub rsa2048/DBAC8DAE 2010-08-18';;
- *Rex*|*Expired*) echo 'pub rsa2048/27CE74F9 2013-07-12 [expired: 2013-07-13]';;
- *Marvin*|*Paranoid*) echo 'pub rsa2048/528144E2 2011-01-16';;
- oldarchive) echo 'pub rsa1024/F68C85A3 2013-12-19';;
- newarchive) echo 'pub rsa2048/DBAC8DAE 2010-08-18';;
- *) echo 'UNKNOWN KEY';;
- esac
- else
- case "$1" in
- *Joe*|*Sixpack*) echo 'pub 2048R/DBAC8DAE 2010-08-18';;
- *Rex*|*Expired*) echo 'pub 2048R/27CE74F9 2013-07-12 [expired: 2013-07-13]';;
- *Marvin*|*Paranoid*) echo 'pub 2048R/528144E2 2011-01-16';;
- oldarchive) echo 'pub 1024R/F68C85A3 2013-12-19';;
- newarchive) echo 'pub 2048R/DBAC8DAE 2010-08-18';;
- *) echo 'UNKNOWN KEY';;
- esac
- fi
+ case "$1" in
+ *Joe*|*Sixpack*|newarchive) echo '5A90D141DBAC8DAE';;
+ *Rex*|*Expired*) echo '4BC0A39C27CE74F9';;
+ *Marvin*|*Paranoid*) echo 'E8525D47528144E2';;
+ oldarchive) echo 'FDD2DB85F68C85A3';;
+ *) echo 'UNKNOWN KEY';;
+ esac
shift
done
}
testaptkeys() {
local OUTPUT="${TMPWORKINGDIRECTORY}/rootdir/tmp/aptkeylist.output"
- if ! aptkey list | grep '^pub' > "$OUTPUT"; then
+ if ! aptkey list --with-colon | grep '^pub' | cut -d':' -f 5 > "$OUTPUT"; then
echo -n > "$OUTPUT"
fi
- testfileequal "$OUTPUT" "$(createlistofkeys "$OUTPUT" "$@")"
+ testfileequal "$OUTPUT" "$(mapkeynametokeyid "$@")"
}
pause() {
read IGNORE
}
+logcurrentarchivedirectory() {
+ find "${TMPWORKINGDIRECTORY}/aptarchive/dists" -type f | while read line; do
+ stat --format '%U:%G:%a:%n' "$line"
+ done | sort > "${TMPWORKINGDIRECTORY}/rootdir/var/log/aptgetupdate.before.lst"
+}
listcurrentlistsdirectory() {
{
find rootdir/var/lib/apt/lists -maxdepth 1 -type d | while read line; do
### general things about commands executed without writing the test every time.
aptautotest() {
+ if [ $# -lt 3 ]; then return; fi
local TESTCALL="$1"
local CMD="$2"
local FIRSTOPT="$3"
+ shift 2
+ for i in "$@"; do
+ if ! expr match "$i" '^-' >/dev/null 2>&1; then
+ FIRSTOPT="$i"
+ break
+ fi
+ done
+ shift
local AUTOTEST="aptautotest_$(echo "${CMD##*/}_${FIRSTOPT}" | tr -d -c 'A-za-z0-9')"
if command -v $AUTOTEST >/dev/null; then
- shift 3
# save and restore the *.output files from other tests
# as we might otherwise override them in these automatic tests
rm -rf "${TMPWORKINGDIRECTORY}/rootdir/tmp-before"
# failure cases can retain partial files and such
testempty find "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt/lists/partial" -mindepth 1 ! \( -name 'lock' -o -name '*.FAILED' \)
fi
+ if [ -s "${TMPWORKINGDIRECTORY}/rootdir/var/log/aptgetupdate.before.lst" ]; then
+ testfileequal "${TMPWORKINGDIRECTORY}/rootdir/var/log/aptgetupdate.before.lst" \
+ "$(find "${TMPWORKINGDIRECTORY}/aptarchive/dists" -type f | while read line; do stat --format '%U:%G:%a:%n' "$line"; done | sort)"
+ fi
}
aptautotest_apt_update() { aptautotest_aptget_update "$@"; }
aptautotest_aptcdrom_add() { aptautotest_aptget_update "$@"; }
aptautotest_apt_install() { testaptautotestnodpkgwarning "$@"; }
aptautotest_apt_remove() { testaptautotestnodpkgwarning "$@"; }
aptautotest_apt_purge() { testaptautotestnodpkgwarning "$@"; }
+
+testaptmarknodefaultsections() {
+ testfailure grep '^Auto-Installed: 0$' "${TMPWORKINGDIRECTORY}/rootdir/var/lib/apt/extended_states"
+}
+aptautotest_aptmark_auto() { testaptmarknodefaultsections "$@"; }
+aptautotest_aptmark_manual() { testaptmarknodefaultsections "$@"; }
+aptautotest_aptget_markauto() { testaptmarknodefaultsections "$@"; }
+aptautotest_aptget_markmanual() { testaptmarknodefaultsections "$@"; }
projects / apt.git / blobdiff