runapt() {
msgdebug "Executing: ${CCMD}$*${CDEBUG} "
if [ -f ./aptconfig.conf ]; then
- APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
- elif [ -f ../aptconfig.conf ]; then
- APT_CONFIG=../aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
+ MALLOC_PERTURB_=21 MALLOC_CHECK_=2 APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
+ elif [ -f ../aptconfig.conf ]; then
+ MALLOC_PERTURB_=21 MALLOC_CHECK_=2 APT_CONFIG=../aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
else
- LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
+ MALLOC_PERTURB_=21 MALLOC_CHECK_=2 LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/$*
fi
}
aptconfig() { runapt apt-config $*; }
aptcache() { runapt apt-cache $*; }
aptcdrom() { runapt apt-cdrom $*; }
aptget() { runapt apt-get $*; }
+apt() { runapt apt $*; }
aptftparchive() { runapt apt-ftparchive $*; }
aptkey() { runapt apt-key $*; }
aptmark() { runapt apt-mark $*; }
+aptwebserver() {
+ LD_LIBRARY_PATH=${APTWEBSERVERBINDIR} ${APTWEBSERVERBINDIR}/aptwebserver $*;
+}
dpkg() {
$(which dpkg) --root=${TMPWORKINGDIRECTORY}/rootdir --force-not-root --force-bad-path --log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log $*
}
}
gdb() {
echo "gdb: run »$*«"
- APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} $(which gdb) ${BUILDDIRECTORY}/$1
+ APT_CONFIG=aptconfig.conf LD_LIBRARY_PATH=${BUILDDIRECTORY} $(which gdb) ${BUILDDIRECTORY}/$1 --args $*
}
http() {
LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/methods/http
exit $((EXIT_CODE <= 255 ? EXIT_CODE : 255));
}
+shellsetedetector() {
+ local exit_status=$?
+ if [ "$exit_status" != '0' ]; then
+ echo >&2 "${CERROR}E: Looks like the testcases ended prematurely with exitcode: ${exit_status}${CNORMAL}"
+ if [ "$EXIT_CODE" = '0' ]; then
+ EXIT_CODE="$exit_status"
+ fi
+ fi
+}
+
addtrap() {
if [ "$1" = 'prefix' ]; then
CURRENTTRAP="$2 $CURRENTTRAP"
else
CURRENTTRAP="$CURRENTTRAP $1"
fi
- trap "$CURRENTTRAP exitwithstatus;" 0 HUP INT QUIT ILL ABRT FPE SEGV PIPE TERM
+ trap "shellsetedetector; $CURRENTTRAP exitwithstatus;" 0 HUP INT QUIT ILL ABRT FPE SEGV PIPE TERM
}
setupenvironment() {
TMPWORKINGDIRECTORY=$(mktemp -d)
TESTDIRECTORY=$(readlink -f $(dirname $0))
msgninfo "Preparing environment for ${CCMD}$(basename $0)${CINFO} in ${TMPWORKINGDIRECTORY}… "
- BUILDDIRECTORY="${TESTDIRECTORY}/../../build/bin"
+
+ # allow overriding the default BUILDDIR location
+ BUILDDIRECTORY=${APT_INTEGRATION_TESTS_BUILD_DIR:-"${TESTDIRECTORY}/../../build/bin"}
+ METHODSDIR=${APT_INTEGRATION_TESTS_METHODS_DIR:-"${BUILDDIRECTORY}/methods"}
+ APTWEBSERVERBINDIR=${APT_INTEGRATION_TESTS_WEBSERVER_BIN_DIR:-"${BUILDDIRECTORY}"}
test -x "${BUILDDIRECTORY}/apt-get" || msgdie "You need to build tree first"
+ # -----
+
addtrap "cd /; rm -rf $TMPWORKINGDIRECTORY;"
cd $TMPWORKINGDIRECTORY
mkdir rootdir aptarchive keys
echo "Dir::state::status \"${TMPWORKINGDIRECTORY}/rootdir/var/lib/dpkg/status\";" >> aptconfig.conf
echo "Debug::NoLocking \"true\";" >> aptconfig.conf
echo "APT::Get::Show-User-Simulation-Note \"false\";" >> aptconfig.conf
- echo "Dir::Bin::Methods \"${BUILDDIRECTORY}/methods\";" >> aptconfig.conf
+ echo "Dir::Bin::Methods \"${METHODSDIR}\";" >> aptconfig.conf
echo "Dir::Bin::dpkg \"fakeroot\";" >> aptconfig.conf
echo "DPKG::options:: \"dpkg\";" >> aptconfig.conf
echo "DPKG::options:: \"--root=${TMPWORKINGDIRECTORY}/rootdir\";" >> aptconfig.conf
echo "DPKG::options:: \"--force-not-root\";" >> aptconfig.conf
echo "DPKG::options:: \"--force-bad-path\";" >> aptconfig.conf
- if ! $(which dpkg) --assert-multi-arch 2>&1 > /dev/null; then
+ if ! $(which dpkg) --assert-multi-arch >/dev/null 2>&1; then
echo "DPKG::options:: \"--force-architecture\";" >> aptconfig.conf # Added to test multiarch before dpkg is ready for it…
fi
echo "DPKG::options:: \"--log=${TMPWORKINGDIRECTORY}/rootdir/var/log/dpkg.log\";" >> aptconfig.conf
echo 'quiet::NoUpdate "true";' >> aptconfig.conf
+ echo "Acquire::https::CaInfo \"${TESTDIR}/apt.pem\";" > rootdir/etc/apt/apt.conf.d/99https
+ echo "Apt::Cmd::Disable-Script-Warning \"1\";" > rootdir/etc/apt/apt.conf.d/apt-binary
export LC_ALL=C
export PATH="${PATH}:/usr/local/sbin:/usr/sbin:/sbin"
+ configcompression '.' 'gz' #'bz2' 'lzma' 'xz'
msgdone "info"
}
}
configarchitecture() {
- local CONFFILE=rootdir/etc/apt/apt.conf.d/01multiarch.conf
- rm -f $CONFFILE
- echo "APT::Architecture \"$(getarchitecture $1)\";" > $CONFFILE
- shift
- while [ -n "$1" ]; do
- echo "APT::Architectures:: \"$(getarchitecture $1)\";" >> $CONFFILE
- shift
- done
+ {
+ echo "APT::Architecture \"$(getarchitecture $1)\";"
+ while [ -n "$1" ]; do
+ echo "APT::Architectures:: \"$(getarchitecture $1)\";"
+ shift
+ done
+ } >rootdir/etc/apt/apt.conf.d/01multiarch.conf
configdpkg
}
echo -n > rootdir/var/lib/dpkg/status
fi
fi
- if $(which dpkg) --assert-multi-arch 2>&1 > /dev/null; then
+ rm -f rootdir/etc/apt/apt.conf.d/00foreigndpkg
+ if $(which dpkg) --assert-multi-arch >/dev/null 2>&1; then
local ARCHS="$(getarchitectures)"
if echo "$ARCHS" | grep -E -q '[^ ]+ [^ ]+'; then
DPKGARCH="$(dpkg --print-architecture)"
for ARCH in ${ARCHS}; do
- if [ "${ARCH}" != "${DPKGARCH}" ]; then dpkg --add-architecture ${ARCH}; fi
+ if [ "${ARCH}" != "${DPKGARCH}" ]; then
+ if ! dpkg --add-architecture ${ARCH} >/dev/null 2>&1; then
+ # old-style used e.g. in Ubuntu-P – and as it seems travis
+ echo "DPKG::options:: \"--foreign-architecture\";" >> rootdir/etc/apt/apt.conf.d/00foreigndpkg
+ echo "DPKG::options:: \"${ARCH}\";" >> rootdir/etc/apt/apt.conf.d/00foreigndpkg
+ fi
+ fi
done
if [ "0" = "$(dpkg -l dpkg 2> /dev/null | grep '^i' | wc -l)" ]; then
# dpkg doesn't really check the version as long as it is fully installed,
fi
}
+configcompression() {
+ while [ -n "$1" ]; do
+ case "$1" in
+ '.') echo ".\t.\tcat";;
+ 'gz') echo "gzip\tgz\tgzip";;
+ 'bz2') echo "bzip2\tbz2\tbzip2";;
+ 'lzma') echo "lzma\tlzma\txz --format=lzma";;
+ 'xz') echo "xz\txz\txz";;
+ *) echo "$1\t$1\t$1";;
+ esac
+ shift
+ done > ${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf
+}
+
setupsimplenativepackage() {
local NAME="$1"
local ARCH="$2"
local VERSION="$3"
local RELEASE="${4:-unstable}"
local DEPENDENCIES="$5"
- local DESCRIPTION="$6"
+ local DESCRIPTION="${6:-"an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
+ If you find such a package installed on your system,
+ something went horribly wrong! They are autogenerated
+ und used only by testcases and surf no other propose…"}"
+
local SECTION="${7:-others}"
local DISTSECTION
if [ "$SECTION" = "$(echo "$SECTION" | cut -d'/' -f 2)" ]; then
echo "Architecture: any" >> debian/control
fi
test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> debian/control
- if [ -z "$DESCRIPTION" ]; then
- echo "Description: an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
- If you find such a package installed on your system,
- YOU did something horribly wrong! They are autogenerated
- und used only by testcases for APT and surf no other propose…" >> debian/control
- else
- echo "Description: $DESCRIPTION" >> debian/control
- fi
+ echo "Description: $DESCRIPTION" >> debian/control
+
test -e debian/compat || echo "7" > debian/compat
test -e debian/source/format || echo "3.0 (native)" > debian/source/format
test -e debian/rules || cp /usr/share/doc/debhelper/examples/rules.tiny debian/rules
local VERSION="$3"
local RELEASE="${4:-unstable}"
local DEPENDENCIES="$5"
- local DESCRIPTION="$6"
+ local DESCRIPTION="${6:-"an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
+ If you find such a package installed on your system,
+ something went horribly wrong! They are autogenerated
+ und used only by testcases and surf no other propose…"}"
+
local SECTION="${7:-others}"
local PRIORITY="${8:-optional}"
+ local FILE_TREE="$9"
local DISTSECTION
if [ "$SECTION" = "$(echo "$SECTION" | cut -d'/' -f 2)" ]; then
DISTSECTION="main"
fi
local DEPS="$(echo "$DEPENDENCIES" | grep -v '^Build-')"
test -z "$DEPS" || echo "$DEPS" >> ${BUILDDIR}/debian/control
- if [ -z "$DESCRIPTION" ]; then
- echo "Description: an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
- If you find such a package installed on your system,
- YOU did something horribly wrong! They are autogenerated
- und used only by testcases for APT and surf no other propose…" >> ${BUILDDIR}/debian/control
- else
- echo "Description: $DESCRIPTION" >> ${BUILDDIR}/debian/control
- fi
+ echo "Description: $DESCRIPTION" >> ${BUILDDIR}/debian/control
echo '3.0 (native)' > ${BUILDDIR}/debian/source/format
(cd ${BUILDDIR}/..; dpkg-source -b ${NAME}-${VERSION} 2>&1) | sed -n 's#^dpkg-source: info: building [^ ]\+ in ##p' \
mkdir -p ${BUILDDIR}/debian/tmp/DEBIAN ${BUILDDIR}/debian/tmp/usr/share/doc/${NAME} ${BUILDDIR}/debian/tmp/usr/bin
cp ${BUILDDIR}/debian/copyright ${BUILDDIR}/debian/changelog ${BUILDDIR}/FEATURES ${BUILDDIR}/debian/tmp/usr/share/doc/${NAME}
cp ${BUILDDIR}/${NAME} ${BUILDDIR}/debian/tmp/usr/bin/${NAME}-${arch}
+ if [ -n "$FILE_TREE" ]; then
+ cp -ar "$FILE_TREE" ${BUILDDIR}/debian/tmp
+ fi
+
(cd ${BUILDDIR}; dpkg-gencontrol -DArchitecture=$arch)
(cd ${BUILDDIR}/debian/tmp; md5sum $(find usr/ -type f) > DEBIAN/md5sums)
-
dpkg-deb --build ${BUILDDIR}/debian/tmp ${BUILDDIR}/.. 2> /dev/null > /dev/null
echo "pool/${NAME}_${VERSION}_${arch}.deb" >> ${BUILDDIR}/../${RELEASE}.${DISTSECTION}.pkglist
done
}
createaptftparchiveconfig() {
+ local COMPRESSORS="$(cut -d' ' -f 1 ${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf | tr '\n' ' ')"
+ COMPRESSORS="${COMPRESSORS%* }"
local ARCHS="$(find pool/ -name '*.deb' | grep -oE '_[a-z0-9-]+\.deb$' | sort | uniq | sed -e '/^_all.deb$/ d' -e 's#^_\([a-z0-9-]*\)\.deb$#\1#' | tr '\n' ' ')"
if [ -z "$ARCHS" ]; then
# the pool is empty, so we will operate on faked packages - let us use the configured archs
echo -n '";
};
Default {
- Packages::Compress ". gzip bzip2 lzma xz";
- Sources::Compress ". gzip bzip2 lzma xz";
- Contents::Compress ". gzip bzip2 lzma xz";
- Translation::Compress ". gzip bzip2 lzma xz";
+ Packages::Compress "'"$COMPRESSORS"'";
+ Sources::Compress "'"$COMPRESSORS"'";
+ Contents::Compress "'"$COMPRESSORS"'";
+ Translation::Compress "'"$COMPRESSORS"'";
LongDescription "false";
};
TreeDefault {
local VERSION="$4"
local DEPENDENCIES="$5"
local PRIORITY="${6:-optional}"
- local DESCRIPTION="${7}"
+ local DESCRIPTION="${7:-"an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
+ If you find such a package installed on your system,
+ something went horribly wrong! They are autogenerated
+ und used only by testcases and surf no other propose…"}"
local ARCHS=""
for arch in $(echo "$ARCH" | sed -e 's#,#\n#g' | sed -e "s#^native\$#$(getarchitecture 'native')#"); do
if [ "$arch" = 'all' -o "$arch" = 'none' ]; then
echo "Version: $VERSION
Filename: pool/main/${NAME}/${NAME}_${VERSION}_${arch}.deb" >> $FILE
test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> $FILE
- echo -n 'Description: ' >> $FILE
- if [ -z "$DESCRIPTION" ]; then
- echo "an autogenerated dummy ${NAME}=${VERSION}/${RELEASE}
- If you find such a package installed on your system,
- YOU did something horribly wrong! They are autogenerated
- und used only by testcases for APT and surf no other propose…" >> $FILE
- else
- echo "$DESCRIPTION" >> $FILE
- fi
+ echo "Description: $DESCRIPTION" >> $FILE
echo >> $FILE
done
done
local DEPENDENCIES="$4"
local PRIORITY="${5:-optional}"
local STATUS="${6:-install ok installed}"
+ local DESCRIPTION="${7:-"an autogenerated dummy ${NAME}=${VERSION}/installed
+ If you find such a package installed on your system,
+ something went horribly wrong! They are autogenerated
+ und used only by testcases and surf no other propose…"}"
+
local FILE='rootdir/var/lib/dpkg/status'
local INFO='rootdir/var/lib/dpkg/info'
for arch in $(echo "$ARCH" | sed -e 's#,#\n#g' | sed -e "s#^native\$#$(getarchitecture 'native')#"); do
Version: $VERSION" >> $FILE
test "$arch" = 'none' || echo "Architecture: $arch" >> $FILE
test -z "$DEPENDENCIES" || echo "$DEPENDENCIES" >> $FILE
- echo "Description: an autogenerated dummy ${NAME}=${VERSION}/installed
- If you find such a package installed on your system,
- YOU did something horribly wrong! They are autogenerated
- und used only by testcases for APT and surf no other propose…
-" >> $FILE
+ echo "Description: $DESCRIPTION" >> $FILE
+ echo >> $FILE
if [ "$(dpkg-query -W --showformat='${Multi-Arch}')" = 'same' ]; then
echo -n > ${INFO}/${NAME}:${arch}.list
else
msginfo "Build APT archive for ${CCMD}$(basename $0)${CINFO} based on prebuild files…"
find aptarchive -name 'Packages' -o -name 'Sources' | while read line; do
msgninfo "\t${line} file… "
- cat ${line} | gzip > ${line}.gz
- cat ${line} | bzip2 > ${line}.bz2
- cat ${line} | xz --format=lzma > ${line}.lzma
- cat ${line} | xz > ${line}.xz
+ compressfile "$line" "$1"
msgdone "info"
done
- generatereleasefiles
+ generatereleasefiles "$@"
+}
+
+compressfile() {
+ cat ${TMPWORKINGDIRECTORY}/rootdir/etc/testcase-compressor.conf | while read compressor extension command; do
+ if [ "$compressor" = '.' ]; then
+ if [ -n "$2" ]; then
+ touch -d "$2" "$1"
+ fi
+ continue
+ fi
+ cat "$1" | $command > "${1}.${extension}"
+ if [ -n "$2" ]; then
+ touch -d "$2" "${1}.${extension}"
+ fi
+ done
}
# can be overridden by testcases for their pleasure
signreleasefiles() {
local SIGNER="${1:-Joe Sixpack}"
+ local GPG="gpg --batch --yes --no-default-keyring --trustdb-name rootdir/etc/apt/trustdb.gpg"
msgninfo "\tSign archive with $SIGNER key… "
- local SECKEYS=""
+ local REXKEY='keys/rexexpired'
+ local SECEXPIREBAK="${REXKEY}.sec.bak"
+ local PUBEXPIREBAK="${REXKEY}.pub.bak"
+ if [ "${SIGNER}" = 'Rex Expired' ]; then
+ # the key is expired, so gpg doesn't allow to sign with and the --faked-system-time
+ # option doesn't exist anymore (and using faketime would add a new obscure dependency)
+ # therefore we 'temporary' make the key not expired and restore a backup after signing
+ cp ${REXKEY}.sec $SECEXPIREBAK
+ cp ${REXKEY}.pub $PUBEXPIREBAK
+ local SECUNEXPIRED="${REXKEY}.sec.unexpired"
+ local PUBUNEXPIRED="${REXKEY}.pub.unexpired"
+ if [ -f "$SECUNEXPIRED" ] && [ -f "$PUBUNEXPIRED" ]; then
+ cp $SECUNEXPIRED ${REXKEY}.sec
+ cp $PUBUNEXPIRED ${REXKEY}.pub
+ else
+ printf "expire\n1w\nsave\n" | $GPG --keyring ${REXKEY}.pub --secret-keyring ${REXKEY}.sec --command-fd 0 --edit-key "${SIGNER}" >/dev/null 2>&1 || true
+ cp ${REXKEY}.sec $SECUNEXPIRED
+ cp ${REXKEY}.pub $PUBUNEXPIRED
+ fi
+ fi
for KEY in $(find keys/ -name '*.sec'); do
- SECKEYS="$SECKEYS --secret-keyring $KEY"
+ GPG="$GPG --secret-keyring $KEY"
done
- local PUBKEYS=""
for KEY in $(find keys/ -name '*.pub'); do
- PUBKEYS="$PUBKEYS --keyring $KEY"
+ GPG="$GPG --keyring $KEY"
done
for RELEASE in $(find aptarchive/ -name Release); do
- gpg --yes --no-default-keyring $SECKEYS $PUBKEYS --default-key "$SIGNER" -abs -o ${RELEASE}.gpg ${RELEASE}
- gpg --yes --no-default-keyring $SECKEYS $PUBKEYS --default-key "$SIGNER" --clearsign -o "$(echo "${RELEASE}" | sed 's#/Release$#/InRelease#')" $RELEASE
+ $GPG --default-key "$SIGNER" --armor --detach-sign --sign --output ${RELEASE}.gpg ${RELEASE}
+ local INRELEASE="$(echo "${RELEASE}" | sed 's#/Release$#/InRelease#')"
+ $GPG --default-key "$SIGNER" --clearsign --output $INRELEASE $RELEASE
+ # we might have set a specific date for the Release file, so copy it
+ touch -d "$(stat --format "%y" ${RELEASE})" ${RELEASE}.gpg ${INRELEASE}
done
+ if [ -f "$SECEXPIREBAK" ] && [ -f "$PUBEXPIREBAK" ]; then
+ mv -f $SECEXPIREBAK ${REXKEY}.sec
+ mv -f $PUBEXPIREBAK ${REXKEY}.pub
+ fi
msgdone "info"
}
+webserverconfig() {
+ msgtest "Set webserver config option '${1}' to" "$2"
+ downloadfile "http://localhost:8080/_config/set/${1}/${2}" '/dev/null' >/dev/null
+ local DOWNLOG='download-testfile.log'
+ rm -f "$DOWNLOG"
+ local STATUS="$(mktemp)"
+ addtrap "rm $STATUS;"
+ downloadfile "http://localhost:8080/_config/find/aptwebserver::last-status-code" "$STATUS" > "$DOWNLOG"
+ if [ "$(cat "$STATUS")" = '200' ]; then
+ msgpass
+ else
+ cat >&2 "$DOWNLOG"
+ msgfail "Statuscode was $(cat "$STATUS")"
+ fi
+}
+
+rewritesourceslist() {
+ local APTARCHIVE="file://$(readlink -f "${TMPWORKINGDIRECTORY}/aptarchive")"
+ for LIST in $(find rootdir/etc/apt/sources.list.d/ -name 'apt-test-*.list'); do
+ sed -i $LIST -e "s#$APTARCHIVE#${1}#" -e "s#http://localhost:8080/#${1}#" -e "s#http://localhost:4433/#${1}#"
+ done
+}
+
changetowebserver() {
+ if [ "$1" != '--no-rewrite' ]; then
+ rewritesourceslist 'http://localhost:8080/'
+ else
+ shift
+ fi
local LOG='/dev/null'
- if test -x ${BUILDDIRECTORY}/aptwebserver; then
- cd aptarchive
- LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/aptwebserver "$@" >$LOG 2>&1 &
- addtrap "kill $!;"
- cd - > /dev/null
- elif [ $# -gt 0 ]; then
- msgdie 'Need the aptwebserver when passing arguments for the webserver'
- elif which weborf > /dev/null; then
- weborf -xb aptarchive/ >$LOG 2>&1 &
- addtrap "kill $!;"
- elif which gatling > /dev/null; then
+ if test -x ${APTWEBSERVERBINDIR}/aptwebserver; then
cd aptarchive
- gatling -p 8080 -F -S >$LOG 2>&1 &
- addtrap "kill $!;"
+ aptwebserver -o aptwebserver::fork=1 "$@" >$LOG 2>&1
+ local PID="$(cat aptwebserver.pid)"
+ if [ -z "$PID" ]; then
+ msgdie 'Could not fork aptwebserver successfully'
+ fi
+ addtrap "kill $PID;"
cd - > /dev/null
- elif which lighttpd > /dev/null; then
- echo "server.document-root = \"$(readlink -f ./aptarchive)\"
-server.port = 8080
-server.stat-cache-engine = \"disable\"" > lighttpd.conf
- lighttpd -t -f lighttpd.conf >/dev/null || msgdie 'Can not change to webserver: our lighttpd config is invalid'
- lighttpd -D -f lighttpd.conf >$LOG 2>&1 &
- addtrap "kill $!;"
else
msgdie 'You have to build aptwerbserver or install a webserver'
fi
- local APTARCHIVE="file://$(readlink -f ./aptarchive)"
- for LIST in $(find rootdir/etc/apt/sources.list.d/ -name 'apt-test-*.list'); do
- sed -i $LIST -e "s#$APTARCHIVE#http://localhost:8080/#"
- done
- return 0
+}
+
+changetohttpswebserver() {
+ if ! which stunnel4 >/dev/null; then
+ msgdie 'You need to install stunnel4 for https testcases'
+ fi
+ if [ ! -e "${TMPWORKINGDIRECTORY}/aptarchive/aptwebserver.pid" ]; then
+ changetowebserver --no-rewrite
+ fi
+ echo "pid = ${TMPWORKINGDIRECTORY}/aptarchive/stunnel.pid
+cert = ${TESTDIRECTORY}/apt.pem
+output = /dev/null
+
+[https]
+accept = 4433
+connect = 8080
+" > ${TMPWORKINGDIRECTORY}/stunnel.conf
+ stunnel4 "${TMPWORKINGDIRECTORY}/stunnel.conf"
+ local PID="$(cat ${TMPWORKINGDIRECTORY}/aptarchive/stunnel.pid)"
+ addtrap 'prefix' "kill ${PID};"
+ rewritesourceslist 'https://localhost:4433/'
}
changetocdrom() {
find rootdir/etc/apt/sources.list.d/ -name 'apt-test-*.list' -delete
}
+downloadfile() {
+ PROTO="$(echo "$1" | cut -d':' -f 1)"
+ local DOWNLOG="${TMPWORKINGDIRECTORY}/download.log"
+ rm -f "$DOWNLOG"
+ touch "$DOWNLOG"
+ {
+ echo "601 Configuration
+Config-Item: Acquire::https::CaInfo=${TESTDIR}/apt.pem
+Config-Item: Debug::Acquire::${PROTO}=1
+
+600 Acquire URI
+URI: $1
+Filename: ${2}
+"
+ # simple worker keeping stdin open until we are done (201) or error (400)
+ # and requesting new URIs on try-agains/redirects inbetween
+ { tail -n 999 -f "$DOWNLOG" & echo "TAILPID: $!"; } | while read f1 f2; do
+ if [ "$f1" = 'TAILPID:' ]; then
+ TAILPID="$f2"
+ elif [ "$f1" = 'New-URI:' ]; then
+ echo "600 Acquire URI
+URI: $f2
+Filename: ${2}
+"
+ elif [ "$f1" = '201' ] || [ "$f1" = '400' ]; then
+ # tail would only die on next read – which never happens
+ test -z "$TAILPID" || kill -s HUP "$TAILPID"
+ break
+ fi
+ done
+ } | LD_LIBRARY_PATH=${BUILDDIRECTORY} ${BUILDDIRECTORY}/methods/${PROTO} 2>&1 | tee "$DOWNLOG"
+ rm "$DOWNLOG"
+ # only if the file exists the download was successful
+ if [ -e "$2" ]; then
+ return 0
+ else
+ return 1
+ fi
+}
+
checkdiff() {
local DIFFTEXT="$($(which diff) -u $* | sed -e '/^---/ d' -e '/^+++/ d' -e '/^@@/ d')"
if [ -n "$DIFFTEXT" ]; then
echo "$2" > $COMPAREFILE2
shift 2
msgtest "Test for equality OR of" "$*"
- $* 2>&1 1> $COMPAREAGAINST
+ $* >$COMPAREAGAINST 2>&1 || true
(checkdiff $COMPAREFILE1 $COMPAREAGAINST 1> /dev/null ||
checkdiff $COMPAREFILE2 $COMPAREAGAINST 1> /dev/null) && msgpass ||
( echo "\n${CINFO}Diff against OR 1${CNORMAL}" "$(checkdiff $COMPAREFILE1 $COMPAREAGAINST)" \
aptmark showauto 2>&1 | checkdiff $COMPAREFILE - && msgpass || msgfail
}
+testsuccess() {
+ if [ "$1" = '--nomsg' ]; then
+ shift
+ else
+ msgtest 'Test for successful execution of' "$*"
+ fi
+ local OUTPUT=$(mktemp)
+ addtrap "rm $OUTPUT;"
+ if $@ >${OUTPUT} 2>&1; then
+ msgpass
+ else
+ echo
+ cat $OUTPUT
+ msgfail
+ fi
+}
+
+testfailure() {
+ if [ "$1" = '--nomsg' ]; then
+ shift
+ else
+ msgtest 'Test for failure in execution of' "$*"
+ fi
+ local OUTPUT=$(mktemp)
+ addtrap "rm $OUTPUT;"
+ if $@ >${OUTPUT} 2>&1; then
+ echo
+ cat $OUTPUT
+ msgfail
+ else
+ msgpass
+ fi
+}
+
pause() {
echo "STOPPED execution. Press enter to continue"
local IGNORE
projects / apt.git / blobdiff