Release 1.1.8

[apt.git] / doc / po / pl.po

diff --git a/doc/po/pl.po b/doc/po/pl.po
index 7be44e01bddac451a23f00913f7b266bb547fe2b..166980f71319f4710be6b02b454ed44d4bbddcdf 100644 (file)
--- a/doc/po/pl.po
+++ b/doc/po/pl.po
@@ -11,7 +11,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: apt-doc 1.0.5\n"
 "Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"
 msgstr ""
 "Project-Id-Version: apt-doc 1.0.5\n"
 "Report-Msgid-Bugs-To: APT Development Team <deity@lists.debian.org>\n"

-"POT-Creation-Date: 2015-10-27 10:30+0100\n"
+"POT-Creation-Date: 2015-12-26 23:24+0100\n"

 "PO-Revision-Date: 2014-07-04 02:13+0200\n"
 "Last-Translator: Robert Luberda <robert@debian.org>\n"
 "Language-Team: Polish <manpages-pl-list@lists.sourceforge.net>\n"
 "PO-Revision-Date: 2014-07-04 02:13+0200\n"
 "Last-Translator: Robert Luberda <robert@debian.org>\n"
 "Language-Team: Polish <manpages-pl-list@lists.sourceforge.net>\n"


@@ -745,7 +745,7 @@ msgstr ""
 #: apt.8.xml
 msgid ""
 "Performs the requested action on one or more packages specified via &regex;, "
 #: apt.8.xml
 msgid ""
 "Performs the requested action on one or more packages specified via &regex;, "

-"&glob; or exact match. The requested action can be overidden for specific "
+"&glob; or exact match. The requested action can be overridden for specific "

 "packages by append a plus (+) to the package name to install this package or "
 "a minus (-) to remove it."
 msgstr ""
 "packages by append a plus (+) to the package name to install this package or "
 "a minus (-) to remove it."
 msgstr ""


@@ -782,11 +782,11 @@ msgstr ""
 msgid ""
 "Removing a package removes all packaged data, but leaves usually small "
 "(modified) user configuration files behind, in case the remove was an "
 msgid ""
 "Removing a package removes all packaged data, but leaves usually small "
 "(modified) user configuration files behind, in case the remove was an "

-"accident. Just issuing an installtion request for the accidentally removed "
-"package will restore it funcation as before in that case. On the other hand "
-"you can get right of these leftovers via calling <command>purge</command> "
-"even on already removed packages.  Note that this does not effect any data "
-"or configuration stored in your home directory."
+"accident. Just issuing an installation request for the accidentally removed "
+"package will restore its function as before in that case. On the other hand "
+"you can get rid of these leftovers by calling <command>purge</command> even "
+"on already removed packages. Note that this does not affect any data or "
+"configuration stored in your home directory."

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>


@@ -809,11 +809,11 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.8.xml
 msgid ""
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 #: apt.8.xml
 msgid ""

-"Try to ensure that the list does not include applications you have grown to "
-"like even through they there once installed just as a dependency of another "
+"You should check that the list does not include applications you have grown "
+"to like even though they were once installed just as a dependency of another "

 "package. You can mark such a package as manually installed by using &apt-"
 "mark;. Packages which you have installed explicitly via <command>install</"
 "package. You can mark such a package as manually installed by using &apt-"
 "mark;. Packages which you have installed explicitly via <command>install</"

-"command> are never proposed for automatic removal as well."
+"command> are also never proposed for automatic removal."

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><term>


@@ -827,7 +827,7 @@ msgstr "&apt-conf;"
 #: apt.8.xml
 msgid ""
 "<option>search</option> can be used to search for the given &regex; term(s) "
 #: apt.8.xml
 msgid ""
 "<option>search</option> can be used to search for the given &regex; term(s) "

-"in the list of the available packages and display matches.  This can e.g. be "
+"in the list of available packages and display matches.  This can e.g. be "

 "useful if you are looking for packages having a specific feature.  If you "
 "are looking for a package including a specific file try &apt-file;."
 msgstr ""
 "useful if you are looking for packages having a specific feature.  If you "
 "are looking for a package including a specific file try &apt-file;."
 msgstr ""


@@ -837,7 +837,7 @@ msgstr ""
 msgid ""
 "Show information about the given package(s) including its dependencies, "
 "installation and download size, sources the package is available from, the "
 msgid ""
 "Show information about the given package(s) including its dependencies, "
 "installation and download size, sources the package is available from, the "

-"description of the packages content and many more. It can e.g. be helpful to "
+"description of the packages content and much more. It can e.g. be helpful to "

 "look at this information before allowing &apt; to remove a package or while "
 "searching for new packages to install."
 msgstr ""
 "look at this information before allowing &apt; to remove a package or while "
 "searching for new packages to install."
 msgstr ""


@@ -867,15 +867,15 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt.8.xml
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt.8.xml

-msgid "Script usage and Differences to other APT tools"
+msgid "Script Usage and Differences from Other APT Tools"

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt.8.xml
 msgid ""
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt.8.xml
 msgid ""

-"The &apt; commandline is designed as a end-user tool and it may change "
-"behaviour between versions. While it tries to not break backward "
-"compatibility there is no guarantee for it either if it seems benefitial for "
+"The &apt; commandline is designed as an end-user tool and it may change "
+"behavior between versions. While it tries not to break backward "
+"compatibility this is not guaranteed either if a change seems beneficial for "

 "interactive use."
 msgstr ""
 
 "interactive use."
 msgstr ""
 


@@ -884,9 +884,10 @@ msgstr ""
 msgid ""
 "All features of &apt; are available in dedicated APT tools like &apt-get; "
 "and &apt-cache; as well.  &apt; just changes the default value of some "
 msgid ""
 "All features of &apt; are available in dedicated APT tools like &apt-get; "
 "and &apt-cache; as well.  &apt; just changes the default value of some "

-"options (see &apt-conf; and specifically the Binary scope). So prefer using "
-"these commands (potentially with some additional options enabled) in your "
-"scripts as they keep backward compatibility as much as possible."
+"options (see &apt-conf; and specifically the Binary scope). So you should "
+"prefer using these commands (potentially with some additional options "
+"enabled) in your scripts as they keep backward compatibility as much as "
+"possible."

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>


@@ -2952,16 +2953,17 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><para>
 #: apt-mark.8.xml
 msgid ""
 #. type: Content of: <refentry><refsect1><para>
 #: apt-mark.8.xml
 msgid ""

-"<command>apt-mark</command> can be used as a unified front-end to set various "
-"settings for a package like marking a package as being automatically/"
-"manually installed or changing <command>dpkg</command> selections such as "
-"hold, install, deinstall and purge which are respected e.g. by <command>apt-"
-"get dselect-upgrade</command> or <command>aptitude</command>."
+"<command>apt-mark</command> can be used as a unified front-end to set "
+"various settings for a package, such as marking a package as being "
+"automatically/manually installed or changing <command>dpkg</command> "
+"selections such as hold, install, deinstall and purge which are respected e."
+"g. by <command>apt-get dselect-upgrade</command> or <command>aptitude</"
+"command>."

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-mark.8.xml
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-mark.8.xml

-msgid "Automatically and manually installed packages"
+msgid "Automatically and Manually Installed Packages"

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>


@@ -2977,8 +2979,8 @@ msgstr ""
 msgid ""
 "When you request that a package is installed, and as a result other packages "
 "are installed to satisfy its dependencies, the dependencies are marked as "
 msgid ""
 "When you request that a package is installed, and as a result other packages "
 "are installed to satisfy its dependencies, the dependencies are marked as "

-"being automatically installed, while package you installed explicitly is "
-"marked as manually installed.  Once a automatically installed package is no "
+"being automatically installed, while the package you installed explicitly is "
+"marked as manually installed.  Once an automatically installed package is no "

 "longer depended on by any manually installed package it is considered no "
 "longer needed and e.g. <command>apt-get</command> or <command>aptitude</"
 "command> will at least suggest removing them."
 "longer depended on by any manually installed package it is considered no "
 "longer needed and e.g. <command>apt-get</command> or <command>aptitude</"
 "command> will at least suggest removing them."


@@ -3052,7 +3054,7 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-mark.8.xml
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-mark.8.xml

-msgid "Prevent changes for a package"
+msgid "Prevent Changes for a Package"

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><variablelist><varlistentry><listitem><para>


@@ -3091,15 +3093,15 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-mark.8.xml
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-mark.8.xml

-msgid "Shedule packages for install, remove and purge"
+msgid "Schedule Packages for Install, Remove and Purge"

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-mark.8.xml
 msgid ""
 "Some front-ends like <command>apt-get dselect-upgrade</command> can be used "
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: apt-mark.8.xml
 msgid ""
 "Some front-ends like <command>apt-get dselect-upgrade</command> can be used "

-"to apply previously sheduled changes to the install state of packages. Such "
-"changes can be sheduled with the <option>install</option>, <option>remove</"
+"to apply previously scheduled changes to the install state of packages. Such "
+"changes can be scheduled with the <option>install</option>, <option>remove</"

 "option> (also known as <option>deinstall</option>) and <option>purge</"
 "option> commands.  Packages with a specific selection can be displayed with "
 "<option>showinstall</option>, <option>showremove</option> and "
 "option> (also known as <option>deinstall</option>) and <option>purge</"
 "option> commands.  Packages with a specific selection can be displayed with "
 "<option>showinstall</option>, <option>showremove</option> and "


@@ -3144,11 +3146,11 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml
 msgid ""
 #. type: Content of: <refentry><refsect1><para>
 #: apt-secure.8.xml
 msgid ""

-"If an archive doesn't have a signed Release file or no Release file at all "
-"current APT versions will raise a warning in <command>update</command> "
-"operations and front-ends like <command>apt-get</command> will require "
-"explicit confirmation if an installation request includes a package from "
-"such an unauthenticated archive."
+"If an archive has an unsigned Release file or no Release file at all current "
+"APT versions will raise a warning in <command>update</command> operations "
+"and front-ends like <command>apt-get</command> will require explicit "
+"confirmation if an installation request includes a package from such an "
+"unauthenticated archive."

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>


@@ -3179,7 +3181,7 @@ msgstr ""
 #: apt-secure.8.xml
 #, fuzzy
 #| msgid "Trusted archives"
 #: apt-secure.8.xml
 #, fuzzy
 #| msgid "Trusted archives"

-msgid "Trusted repositories"
+msgid "Trusted Repositories"

 msgstr "Zaufane archiwa"
 
 #. type: Content of: <refentry><refsect1><para>
 msgstr "Zaufane archiwa"
 
 #. type: Content of: <refentry><refsect1><para>


@@ -3230,10 +3232,10 @@ msgstr ""
 #| "Maintainers' keys are signed by other maintainers following pre-"
 #| "established procedures to ensure the identity of the key holder."
 msgid ""
 #| "Maintainers' keys are signed by other maintainers following pre-"
 #| "established procedures to ensure the identity of the key holder."
 msgid ""

-"The chain of trust in Debian e.g. starts when a maintainer uploads a new "
+"The chain of trust in Debian starts (e.g.) when a maintainer uploads a new "

 "package or a new version of a package to the Debian archive. In order to "
 "become effective, this upload needs to be signed by a key contained in one "
 "package or a new version of a package to the Debian archive. In order to "
 "become effective, this upload needs to be signed by a key contained in one "

-"of the Debian package maintainers keyrings (available in the debian-keyring "
+"of the Debian package maintainer keyrings (available in the debian-keyring "

 "package). Maintainers' keys are signed by other maintainers following pre-"
 "established procedures to ensure the identity of the key holder. Similar "
 "procedures exist in all Debian-based distributions."
 "package). Maintainers' keys are signed by other maintainers following pre-"
 "established procedures to ensure the identity of the key holder. Similar "
 "procedures exist in all Debian-based distributions."


@@ -3340,7 +3342,9 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-secure.8.xml
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-secure.8.xml

-msgid "User configuration"
+#, fuzzy
+#| msgid "User configuration"
+msgid "User Configuration"

 msgstr "Konfiguracja użytkownika"
 
 #. type: Content of: <refentry><refsect1><para>
 msgstr "Konfiguracja użytkownika"
 
 #. type: Content of: <refentry><refsect1><para>


@@ -3390,7 +3394,9 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-secure.8.xml
 
 #. type: Content of: <refentry><refsect1><title>
 #: apt-secure.8.xml

-msgid "Archive configuration"
+#, fuzzy
+#| msgid "Archive configuration"
+msgid "Archive Configuration"

 msgstr "Konfiguracja archiwum"
 
 #. type: Content of: <refentry><refsect1><para>
 msgstr "Konfiguracja archiwum"
 
 #. type: Content of: <refentry><refsect1><para>


@@ -3430,7 +3436,7 @@ msgstr ""
 #| "will know what key they need to import in order to authenticate the files "
 #| "in the archive."
 msgid ""
 #| "will know what key they need to import in order to authenticate the files "
 #| "in the archive."
 msgid ""

-"<emphasis>Publish the key fingerprint</emphasis>, that way your users will "
+"<emphasis>Publish the key fingerprint</emphasis>, so that your users will "

 "know what key they need to import in order to authenticate the files in the "
 "archive. It is best to ship your key in its own keyring package like "
 "&keyring-distro; does with &keyring-package; to be able to distribute "
 "know what key they need to import in order to authenticate the files in the "
 "archive. It is best to ship your key in its own keyring package like "
 "&keyring-distro; does with &keyring-package; to be able to distribute "


@@ -3448,7 +3454,7 @@ msgid ""
 "described above is broken.  How you can help users add your key depends on "
 "your archive and target audience ranging from having your keyring package "
 "included in another archive users already have configured (like the default "
 "described above is broken.  How you can help users add your key depends on "
 "your archive and target audience ranging from having your keyring package "
 "included in another archive users already have configured (like the default "

-"repositories of their distribution) to leverage the web of trust."
+"repositories of their distribution) to leveraging the web of trust."

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>


@@ -3483,8 +3489,8 @@ msgstr ""
 msgid ""
 "For more background information you might want to review the <ulink url="
 "\"https://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "
 msgid ""
 "For more background information you might want to review the <ulink url="
 "\"https://www.debian.org/doc/manuals/securing-debian-howto/ch7\">Debian "

-"Security Infrastructure</ulink> chapter of the Securing Debian Manual "
-"(available also in the harden-doc package) and the <ulink url=\"http://www."
+"Security Infrastructure</ulink> chapter of the Securing Debian Manual (also "
+"available in the harden-doc package) and the <ulink url=\"http://www."

 "cryptnet.net/fdp/crypto/strong_distro.html\" >Strong Distribution HOWTO</"
 "ulink> by V. Alex Brennen."
 msgstr ""
 "cryptnet.net/fdp/crypto/strong_distro.html\" >Strong Distribution HOWTO</"
 "ulink> by V. Alex Brennen."
 msgstr ""


@@ -4714,9 +4720,9 @@ msgid ""
 "replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
 "Origin::<replaceable>ORIGIN</replaceable></literal>.  The value should be a "
 "normal URI to a text file, expect that package specific data is replaced "
 "replaceable></literal> or <literal>Acquire::Changelogs::URI::Override::"
 "Origin::<replaceable>ORIGIN</replaceable></literal>.  The value should be a "
 "normal URI to a text file, expect that package specific data is replaced "

-"with the placeholder <literal>CHANGEPATH</literal>. The value for it is: 1. "
-"if the package is from a component (e.g. <literal>main</literal>)  this is "
-"the first part otherwise it is omitted, 2. the first letter of source "
+"with the placeholder <literal>@CHANGEPATH@</literal>. The value for it is: "
+"1. if the package is from a component (e.g. <literal>main</literal>)  this "
+"is the first part otherwise it is omitted, 2. the first letter of source "

 "package name, expect if the source package name starts with '<literal>lib</"
 "literal>' in which case it will be the first four letters. 3. The complete "
 "source package name. 4. the complete name again and 5. the source version.  "
 "package name, expect if the source package name starts with '<literal>lib</"
 "literal>' in which case it will be the first four letters. 3. The complete "
 "source package name. 4. the complete name again and 5. the source version.  "


@@ -6837,10 +6843,10 @@ msgstr "Lista skonfigurowanych źródeł danych APT"
 #| "by <command>apt-get update</command> (or by an equivalent command from "
 #| "another APT front-end)."
 msgid ""
 #| "by <command>apt-get update</command> (or by an equivalent command from "
 #| "another APT front-end)."
 msgid ""

-"The source list <filename>/etc/apt/sources.list</filename> and the the files "
+"The source list <filename>/etc/apt/sources.list</filename> and the files "

 "contained in <filename>/etc/apt/sources.list.d/</filename> are designed to "
 "support any number of active sources and a variety of source media. The "
 "contained in <filename>/etc/apt/sources.list.d/</filename> are designed to "
 "support any number of active sources and a variety of source media. The "

-"files list one source per line (one line style) or contain multiline stanzas "
+"files list one source per line (one-line style) or contain multiline stanzas "

 "defining one or more sources per stanza (deb822 style), with the most "
 "preferred source listed first (in case a single version is available from "
 "more than one source). The information available from the configured sources "
 "defining one or more sources per stanza (deb822 style), with the most "
 "preferred source listed first (in case a single version is available from "
 "more than one source). The information available from the configured sources "


@@ -6897,7 +6903,7 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: sources.list.5.xml
 
 #. type: Content of: <refentry><refsect1><title>
 #: sources.list.5.xml

-msgid "one line style format"
+msgid "One-Line-Style Format"

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>


@@ -6914,10 +6920,10 @@ msgid ""
 "(<literal>[]</literal>)  included in the line after the type separated from "
 "it with a space.  If an option allows multiple values these are separated "
 "from each other with a comma (<literal>,</literal>). An option name is "
 "(<literal>[]</literal>)  included in the line after the type separated from "
 "it with a space.  If an option allows multiple values these are separated "
 "from each other with a comma (<literal>,</literal>). An option name is "

-"separated from its value(s) by a equal sign (<literal>=</literal>). "
-"Multivalue options have also <literal>-=</literal> and <literal>+=</literal> "
-"as separator which instead of replacing the default with the given value(s) "
-"modify the default value(s) to remove or include the given values."
+"separated from its value(s) by an equals sign (<literal>=</literal>). "
+"Multivalue options also have <literal>-=</literal> and <literal>+=</literal> "
+"as separators, which instead of replacing the default with the given "
+"value(s) modify the default value(s) to remove or include the given values."

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>


@@ -6925,14 +6931,14 @@ msgstr ""
 msgid ""
 "This is the traditional format and supported by all apt versions.  Note that "
 "not all options as described below are supported by all apt versions.  Note "
 msgid ""
 "This is the traditional format and supported by all apt versions.  Note that "
 "not all options as described below are supported by all apt versions.  Note "

-"also that some older applications parsing this format on its own might not "
+"also that some older applications parsing this format on their own might not "

 "expect to encounter options as they were uncommon before the introduction of "
 "multi-architecture support."
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: sources.list.5.xml
 "expect to encounter options as they were uncommon before the introduction of "
 "multi-architecture support."
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: sources.list.5.xml

-msgid "deb822 style format"
+msgid "deb822-Style Format"

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>


@@ -6940,18 +6946,18 @@ msgstr ""
 msgid ""
 "Files in this format have the extension <filename>.sources</filename>.  The "
 "format is similar in syntax to other files used by Debian and its "
 msgid ""
 "Files in this format have the extension <filename>.sources</filename>.  The "
 "format is similar in syntax to other files used by Debian and its "

-"derivatives, like the metadata itself apt will download from the configured "
-"sources or the <filename>debian/control</filename> file in a Debian source "
-"package.  Individual entries are separated by an empty line, additional "
-"empty lines are ignored, and a <literal>#</literal> character at the start "
-"of the line marks the entire line as a comment. An entry can hence be "
-"disabled by commenting out each line belonging to the stanza, but it is "
+"derivatives, such as the metadata files that apt will download from the "
+"configured sources or the <filename>debian/control</filename> file in a "
+"Debian source package.  Individual entries are separated by an empty line; "
+"additional empty lines are ignored, and a <literal>#</literal> character at "
+"the start of the line marks the entire line as a comment. An entry can hence "
+"be disabled by commenting out each line belonging to the stanza, but it is "

 "usually easier to add the field \"Enabled: no\" to the stanza to disable the "
 "entry. Removing the field or setting it to yes reenables it.  Options have "
 "the same syntax as every other field: A fieldname separated by a colon "
 "(<literal>:</literal>) and optionally spaces from its value(s).  Note "
 "especially that multiple values are separated by spaces, not by commas as in "
 "usually easier to add the field \"Enabled: no\" to the stanza to disable the "
 "entry. Removing the field or setting it to yes reenables it.  Options have "
 "the same syntax as every other field: A fieldname separated by a colon "
 "(<literal>:</literal>) and optionally spaces from its value(s).  Note "
 "especially that multiple values are separated by spaces, not by commas as in "

-"the one line format. Multivalue fields like <literal>Architectures</literal> "
+"the one-line format. Multivalue fields like <literal>Architectures</literal> "

 "also have <literal>Architectures-Add</literal> and <literal>Architectures-"
 "Remove</literal> to modify the default value rather than replacing it."
 msgstr ""
 "also have <literal>Architectures-Add</literal> and <literal>Architectures-"
 "Remove</literal> to modify the default value rather than replacing it."
 msgstr ""


@@ -6961,13 +6967,13 @@ msgstr ""
 msgid ""
 "This is a new format supported by apt itself since version 1.1. Previous "
 "versions ignore such files with a notice message as described earlier.  It "
 msgid ""
 "This is a new format supported by apt itself since version 1.1. Previous "
 "versions ignore such files with a notice message as described earlier.  It "

-"is intended to make this format gradually the default format and deprecating "
-"the previously described one line style format as it is easier to create, "
-"extend and modify by humans and machines alike especially if a lot of "
+"is intended to make this format gradually the default format, deprecating "
+"the previously described one-line-style format, as it is easier to create, "
+"extend and modify for humans and machines alike especially if a lot of "

 "sources and/or options are involved.  Developers who are working with and/or "
 "parsing apt sources are highly encouraged to add support for this format and "
 "to contact the APT team to coordinate and share this work. Users can freely "
 "sources and/or options are involved.  Developers who are working with and/or "
 "parsing apt sources are highly encouraged to add support for this format and "
 "to contact the APT team to coordinate and share this work. Users can freely "

-"adopt this format already, but could encounter problems with software not "
+"adopt this format already, but may encounter problems with software not "

 "supporting the format yet."
 msgstr ""
 
 "supporting the format yet."
 msgstr ""
 


@@ -6975,7 +6981,7 @@ msgstr ""
 #: sources.list.5.xml
 #, fuzzy
 #| msgid "The deb and deb-src types"
 #: sources.list.5.xml
 #, fuzzy
 #| msgid "The deb and deb-src types"

-msgid "The deb and deb-src types: General Format"
+msgid "The deb and deb-src Types: General Format"

 msgstr "Typy deb i deb-src"
 
 #. type: Content of: <refentry><refsect1><para>
 msgstr "Typy deb i deb-src"
 
 #. type: Content of: <refentry><refsect1><para>


@@ -7023,7 +7029,7 @@ msgstr ""
 #| "The format for a <filename>sources.list</filename> entry using the "
 #| "<literal>deb</literal> and <literal>deb-src</literal> types is:"
 msgid ""
 #| "The format for a <filename>sources.list</filename> entry using the "
 #| "<literal>deb</literal> and <literal>deb-src</literal> types is:"
 msgid ""

-"The format for two one line style entries using the <literal>deb</literal> "
+"The format for two one-line-style entries using the <literal>deb</literal> "

 "and <literal>deb-src</literal> types is:"
 msgstr ""
 "Formaty wpisu w <filename>sources.list</filename> używającego typów "
 "and <literal>deb-src</literal> types is:"
 msgstr ""
 "Formaty wpisu w <filename>sources.list</filename> używającego typów "


@@ -7104,7 +7110,7 @@ msgid ""
 "literal> which expands to the Debian architecture (such as <literal>amd64</"
 "literal> or <literal>armel</literal>) used on the system. This permits "
 "architecture-independent <filename>sources.list</filename> files to be used. "
 "literal> which expands to the Debian architecture (such as <literal>amd64</"
 "literal> or <literal>armel</literal>) used on the system. This permits "
 "architecture-independent <filename>sources.list</filename> files to be used. "

-"In general this is only of interest when specifying an exact path, "
+"In general this is only of interest when specifying an exact path; "

 "<literal>APT</literal> will automatically generate a URI with the current "
 "architecture otherwise."
 msgstr ""
 "<literal>APT</literal> will automatically generate a URI with the current "
 "architecture otherwise."
 msgstr ""


@@ -7133,7 +7139,7 @@ msgstr ""
 #| "also parallelizes connections to different hosts to more effectively deal "
 #| "with sites with low bandwidth."
 msgid ""
 #| "also parallelizes connections to different hosts to more effectively deal "
 #| "with sites with low bandwidth."
 msgid ""

-"Especially in the one line style format since only one distribution can be "
+"Especially in the one-line-style format since only one distribution can be "

 "specified per line it may be necessary to have multiple lines for the same "
 "URI, if a subset of all available distributions or components at that "
 "location is desired.  APT will sort the URI list after it has generated a "
 "specified per line it may be necessary to have multiple lines for the same "
 "URI, if a subset of all available distributions or components at that "
 "location is desired.  APT will sort the URI list after it has generated a "


@@ -7186,8 +7192,8 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><para>
 #: sources.list.5.xml
 msgid ""
 #. type: Content of: <refentry><refsect1><para>
 #: sources.list.5.xml
 msgid ""

-"As an example, the sources for your distribution could look like this in one "
-"line style format: <placeholder type=\"literallayout\" id=\"0\"/> or like "
+"As an example, the sources for your distribution could look like this in one-"
+"line-style format: <placeholder type=\"literallayout\" id=\"0\"/> or like "

 "this in deb822 style format: <placeholder type=\"literallayout\" id=\"1\"/>"
 msgstr ""
 
 "this in deb822 style format: <placeholder type=\"literallayout\" id=\"1\"/>"
 msgstr ""
 


@@ -7201,12 +7207,12 @@ msgstr "Typy deb i deb-src"
 #. type: Content of: <refentry><refsect1><para>
 #: sources.list.5.xml
 msgid ""
 #. type: Content of: <refentry><refsect1><para>
 #: sources.list.5.xml
 msgid ""

-"Each source entry can have options specified modifying which and how the "
-"source is accessed and data acquired from it. Format, syntax and names of "
-"the options varies between the two formats one line and deb822 style as "
-"described, but they have both the same options available. For simplicity we "
-"list the deb822 fieldname and provide the one line name in brackets.  "
-"Remember that beside setting multivalue options explicitly, there is also "
+"Each source entry can have options specified to modify which source is "
+"accessed and how data is acquired from it. Format, syntax and names of the "
+"options vary between the one-line-style and deb822-style formats as "
+"described, but they both have the same options available. For simplicity we "
+"list the deb822 fieldname and provide the one-line name in brackets.  "
+"Remember that besides setting multivalue options explicitly, there is also "

 "the option to modify them based on the default, but we aren't listing those "
 "names explicitly here. Unsupported options are silently ignored by all APT "
 "versions."
 "the option to modify them based on the default, but we aren't listing those "
 "names explicitly here. Unsupported options are silently ignored by all APT "
 "versions."


@@ -7235,13 +7241,25 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
 #: sources.list.5.xml
 
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
 #: sources.list.5.xml

+#, fuzzy
+#| msgid ""
+#| "<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+#| "replaceable>,…</literal> can be used to specify for which architectures "
+#| "information should be downloaded. If this option is not set all "
+#| "architectures defined by the <literal>APT::Architectures</literal> option "
+#| "will be downloaded."

 msgid ""
 "<option>Languages</option> (<option>lang</option>) is a multivalue option "
 msgid ""
 "<option>Languages</option> (<option>lang</option>) is a multivalue option "

-"defining for which languages information like translated package "
+"defining for which languages information such as translated package "

 "descriptions should be downloaded.  If this option isn't set the default is "
 "all languages as defined by the <option>Acquire::Languages</option> config "
 "option."
 msgstr ""
 "descriptions should be downloaded.  If this option isn't set the default is "
 "all languages as defined by the <option>Acquire::Languages</option> config "
 "option."
 msgstr ""

+"<literal>arch=<replaceable>arch1</replaceable>,<replaceable>arch2</"
+"replaceable>,…</literal> może zostać użyte do podania architektur, dla "
+"których będą pobierane informacje o pakietach. Jeśli ta opcja nie jest "
+"ustawiona, będą pobierane informacje dla wszystkich architektur określonych "
+"w opcji konfiguracji <literal>APT::Architectures</literal>."

 
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
 #: sources.list.5.xml
 
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
 #: sources.list.5.xml


@@ -7249,7 +7267,7 @@ msgid ""
 "<option>Targets</option> (<option>target</option>) is a multivalue option "
 "defining which download targets apt will try to acquire from this source. If "
 "not specified, the default set is defined by the <option>Acquire::"
 "<option>Targets</option> (<option>target</option>) is a multivalue option "
 "defining which download targets apt will try to acquire from this source. If "
 "not specified, the default set is defined by the <option>Acquire::"

-"IndexTargets</option> configuration scope.  Aditionally, specific targets "
+"IndexTargets</option> configuration scope.  Additionally, specific targets "

 "can be enabled or disabled by using the identifier as field name instead of "
 "using this multivalue option."
 msgstr ""
 "can be enabled or disabled by using the identifier as field name instead of "
 "using this multivalue option."
 msgstr ""


@@ -7262,7 +7280,7 @@ msgid ""
 "downloading the new indexes entirely. The value of this option is ignored if "
 "the repository doesn't announce the availability of PDiffs.  Defaults to the "
 "value of the option with the same name for a specific index file defined in "
 "downloading the new indexes entirely. The value of this option is ignored if "
 "the repository doesn't announce the availability of PDiffs.  Defaults to the "
 "value of the option with the same name for a specific index file defined in "

-"the <option>Acquire::IndexTargets</option> scope, which itself default to "
+"the <option>Acquire::IndexTargets</option> scope, which itself defaults to "

 "the value of configuration option <option>Acquire::PDiffs</option> which "
 "defaults to <literal>yes</literal>."
 msgstr ""
 "the value of configuration option <option>Acquire::PDiffs</option> which "
 "defaults to <literal>yes</literal>."
 msgstr ""


@@ -7270,23 +7288,24 @@ msgstr ""
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
 #: sources.list.5.xml
 msgid ""
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
 #: sources.list.5.xml
 msgid ""

-"<option>By-Hash</option> (<option>by-hash</option>)  can have the value \"yes"
-"\", \"no\" or \"force\" and controls if APT should try to acquire indexes "
-"via an URI constructed from a hashsum of the expected file instead of using "
-"the well-known stable filename of the index. Using this can avoid hashsum "
-"mismatches, but requires a supporting mirror. The value \"yes\"/\"no\" "
+"<option>By-Hash</option> (<option>by-hash</option>)  can have the value "
+"<literal>yes</literal>, <literal>no</literal> or <literal>force</literal> "
+"and controls if APT should try to acquire indexes via a URI constructed from "
+"a hashsum of the expected file instead of using the well-known stable "
+"filename of the index. Using this can avoid hashsum mismatches, but requires "
+"a supporting mirror. A <literal>yes</literal> or <literal>no</literal> value "

 "activates/disables the use of this feature if this source indicates support "
 "activates/disables the use of this feature if this source indicates support "

-"for it, while \"force\" will enable the feature regardless of what the "
-"source indicates.  Defaults to the value of the option of the same name for "
-"a specific index file defined in the <option>Acquire::IndexTargets</option> "
-"scope, which itself defaults to the value of configuration option "
+"for it, while <literal>force</literal> will enable the feature regardless of "
+"what the source indicates. Defaults to the value of the option of the same "
+"name for a specific index file defined in the <option>Acquire::IndexTargets</"
+"option> scope, which itself defaults to the value of configuration option "

 "<option>Acquire::By-Hash</option> which defaults to <literal>yes</literal>."
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: sources.list.5.xml
 msgid ""
 "<option>Acquire::By-Hash</option> which defaults to <literal>yes</literal>."
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para>
 #: sources.list.5.xml
 msgid ""

-"Further more, there are options which if set effect <emphasis>all</emphasis> "
+"Furthermore, there are options which if set affect <emphasis>all</emphasis> "

 "sources with the same URI and Suite, so they have to be set on all such "
 "entries and can not be varied between different components. APT will try to "
 "detect and error out on such anomalies."
 "sources with the same URI and Suite, so they have to be set on all such "
 "entries and can not be varied between different components. APT will try to "
 "detect and error out on such anomalies."


@@ -7298,14 +7317,14 @@ msgid ""
 "<option>Trusted</option> (<option>trusted</option>)  is a tri-state value "
 "which defaults to APT deciding if a source is considered trusted or if "
 "warnings should be raised before e.g.  packages are installed from this "
 "<option>Trusted</option> (<option>trusted</option>)  is a tri-state value "
 "which defaults to APT deciding if a source is considered trusted or if "
 "warnings should be raised before e.g.  packages are installed from this "

-"source. This option can be used to override this decision either with the "
-"value <literal>yes</literal>, which lets APT consider this source always as "
-"a trusted source even if it has no or fails authentication checks by "
-"disabling parts of &apt-secure; and should therefore only be used in a local "
-"and trusted context (if at all) as otherwise security is breached. The "
-"opposite can be achieved with the value no, which causes the source to be "
-"handled as untrusted even if the authentication checks passed successfully.  "
-"The default value can't be set explicitly."
+"source. This option can be used to override that decision. The value "
+"<literal>yes</literal> tells APT always to consider this source as trusted, "
+"even if it doesn't pass authentication checks. It disables parts of &apt-"
+"secure;, and should therefore only be used in a local and trusted context "
+"(if at all) as otherwise security is breached. The value <literal>no</"
+"literal> does the opposite, causing the source to be handled as untrusted "
+"even if the authentication checks passed successfully. The default value "
+"can't be set explicitly."

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>


@@ -7314,10 +7333,10 @@ msgid ""
 "<option>Signed-By</option> (<option>signed-by</option>)  is either an "
 "absolute path to a keyring file (has to be accessible and readable for the "
 "<literal>_apt</literal> user, so ensure everyone has read-permissions on the "
 "<option>Signed-By</option> (<option>signed-by</option>)  is either an "
 "absolute path to a keyring file (has to be accessible and readable for the "
 "<literal>_apt</literal> user, so ensure everyone has read-permissions on the "

-"file) or a fingerprint of a key in either the <filename>trusted.gpg</"
+"file) or a fingerprint of a key either in the <filename>trusted.gpg</"

 "filename> keyring or in one of the keyrings in the <filename>trusted.gpg.d/</"
 "filename> directory (see <command>apt-key fingerprint</command>). If the "
 "filename> keyring or in one of the keyrings in the <filename>trusted.gpg.d/</"
 "filename> directory (see <command>apt-key fingerprint</command>). If the "

-"option is set only the key(s) in this keyring or only the key with this "
+"option is set, only the key(s) in this keyring or only the key with this "

 "fingerprint is used for the &apt-secure; verification of this repository. "
 "Otherwise all keys in the trusted keyrings are considered valid signers for "
 "this repository."
 "fingerprint is used for the &apt-secure; verification of this repository. "
 "Otherwise all keys in the trusted keyrings are considered valid signers for "
 "this repository."


@@ -7328,16 +7347,16 @@ msgstr ""
 msgid ""
 "<option>Check-Valid-Until</option> (<option>check-valid-until</option>)  is "
 "a yes/no value which controls if APT should try to detect replay attacks. A "
 msgid ""
 "<option>Check-Valid-Until</option> (<option>check-valid-until</option>)  is "
 "a yes/no value which controls if APT should try to detect replay attacks. A "

-"repository creator can declare until then the data provided in the "
-"repository should be considered valid and if this time is reached, but no "
-"new data is provided the data is considered expired and an error is raised.  "
-"Beside increasing security as a malicious attacker can't sent old data "
-"forever denying a user to be able to upgrade to a new version, this also "
-"helps users identify mirrors which are no longer updated. Some repositories "
-"like historic archives aren't updated anymore by design through, so this "
-"check can be disabled by setting this option to <literal>no</literal>.  "
-"Defaults to the value of configuration option <option>Acquire::Check-Valid-"
-"Until</option> which itself defaults to <literal>yes</literal>."
+"repository creator can declare a time until which the data provided in the "
+"repository should be considered valid, and if this time is reached, but no "
+"new data is provided, the data is considered expired and an error is "
+"raised.  Besides increasing security, as a malicious attacker can't send old "
+"data forever to prevent a user from upgrading to a new version, this also "
+"helps users identify mirrors which are no longer updated. However, some "
+"repositories such as historic archives are not updated any more by design, "
+"so this check can be disabled by setting this option to <literal>no</"
+"literal>.  Defaults to the value of configuration option <option>Acquire::"
+"Check-Valid-Until</option> which itself defaults to <literal>yes</literal>."

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><para><itemizedlist><listitem><para>


@@ -7358,7 +7377,9 @@ msgstr ""
 
 #. type: Content of: <refentry><refsect1><title>
 #: sources.list.5.xml
 
 #. type: Content of: <refentry><refsect1><title>
 #: sources.list.5.xml

-msgid "URI specification"
+#, fuzzy
+#| msgid "URI specification"
+msgid "URI Specification"

 msgstr "Określanie URI"
 
 #. type: Content of: <refentry><refsect1><para>
 msgstr "Określanie URI"
 
 #. type: Content of: <refentry><refsect1><para>


@@ -7532,7 +7553,9 @@ msgstr "deb file:/home/jason/debian unstable main contrib non-free"
 
 #. type: Content of: <refentry><refsect1><para>
 #: sources.list.5.xml
 
 #. type: Content of: <refentry><refsect1><para>
 #: sources.list.5.xml

-msgid "Source line for the above"
+#, fuzzy
+#| msgid "Source line for the above"
+msgid "Sources specification for the above."

 msgstr "Linie źródeł dla powyższego przykładu"
 
 #. type: Content of: <refentry><refsect1><literallayout>
 msgstr "Linie źródeł dla powyższego przykładu"
 
 #. type: Content of: <refentry><refsect1><literallayout>


@@ -8333,7 +8356,10 @@ msgstr ""
 msgid ""
 "This is a space separated list of all the architectures that appear under "
 "search section. The special architecture 'source' is used to indicate that "
 msgid ""
 "This is a space separated list of all the architectures that appear under "
 "search section. The special architecture 'source' is used to indicate that "

-"this tree has a source archive."
+"this tree has a source archive.  The architecture 'all' signals that "
+"architecture specific files like <filename>Packages</filename> should not "
+"include information about architecture <literal>all</literal> packages in "
+"all files as they will be available in a dedicated file."

 msgstr ""
 
 #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>
 msgstr ""
 
 #. type: Content of: <refentry><refsect1><refsect2><variablelist><varlistentry><listitem><para>